Announcement Configuration and Upload File Windows
|
Announcement Identifier
|
The Announcement Identifier is a text box to assign a meaningful identifying name to the announcement.
This field cannot be modified for System Announcements.
This field must be unique (different from all other announcements).
The Announcement Identifier is used when selecting an announcement for a feature such as Music-on-Hold.
|
Customized Description
|
For customized announcements that you are inserting, enter a description for the announcement; for example, enter the text
from the customized announcement. You can enter any characters in this field.
When you click the Upload File button in the Find and List window, this field displays as blank. When you click the Upload
File button in the Announcements Configuration window, the Cisco-provided (default) description for the announcement displays.
If you do not update this field in the Announcements Configuration window, the Cisco-provided (default) description displays.
After you update this customized description field, the Cisco-provided default description displays in the Find and Lists
Announcements window; see the Default Description column in the Find and Lists window for the default description.
You can enter up to 50 characters.
|
Locale
|
This setting displays in the Upload File window. From the Locale drop-down list box, choose the locale that you want to associate
with the announcement.
By default, all Cisco-provided announcements support English_United States. If a Cisco Unified Communications Locale has been
installed, the Cisco-provided announcements are provided for that locale in addition to other installed locales.
Tip
|
For a locale to display in the Locale drop-down list box in the Upload File Configuration window, you must install the Cisco Unified Communications Locale Installer that is specific to your locale(s). For more information, see the Cisco Unified Communications Operating System Administration Guide.
|
|
Default Announcement
|
From the drop-down list box, choose the Cisco-provided announcement that you want to play when the custom announcement is
not used.
If <None> is selected from the list box, no Cisco-provided announcement will be used.
|
Announcement by Locale Pane in the Announcements Configuration Window
Note
|
This section only appears if a custom announcement wav file has been uploaded for the announcement.
|
|
Enable
|
This setting displays after you insert a customized announcement.
When the Enable check box is checked, Cisco Unified Communications Manager plays the customized announcement for the locale that is shown. If you want Cisco Unified Communications Manager to play the Cisco-provided announcement that is associated with the announcement identifier, uncheck the Enable check box.
|
Customized Locale Description
|
This field, which is read-only, displays the description for the customized announcement for the displayed locale. You enter
this description when you upload the customized announcement.
|
Locale
|
This field, which is read-only, displays the locale that you chose for the customized announcement when you uploaded the .wav
file.
Each locale is associated with an uploaded custom announcement. You can upload another wav file for the same announcement,
but you assign it to a different locale. In this case, two rows display, one for each locale. If you want to update or replace
a custom announcement for a locale, you can upload a new wav file with the same locale you want to replace.
|
Default Cisco Announcement
|
This field indicates the last uploaded customized announcement file name.
|