Release Notes for Cisco Small Business SPA51X IP Phone Firmware Version 7.5.7

Available Languages

Download Options

  • PDF     (578.1 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (73.0 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (75.1 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:February 13, 2015

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Table of Contents

Release Notes for Cisco Small Business SPA51X IP Phone Firmware Version 7.5.7

Contents

Introduction

Related Documentation

Cisco Small Business

Cisco Small Business Product Documentation

Software Compatibility

New and Changed Features

BLF Call Pickup Feature

SSLv3 disable by default

Installation

Caveats

Open Caveats

Resolved Caveats

Documentation, Service Requests, and Additional Information

Obtaining Documentation and Submitting a Service Request

Release Notes for Cisco Small Business SPA51X IP Phone Firmware Version 7.5.7

First Published: February 13, 2015

Contents

Introduction

These Release Notes describe the updates and fixes in version 7.5.7 of the Cisco Small Business SPA51X IP Phone firmware.

As with any firmware release, read these release notes before you upgrade the firmware. Cisco also recommends that you back up the configuration before you perform any firmware upgrade.

Related Documentation

Use the following sections to obtain related information.

Cisco Small Business

For more information on Cisco Small Business, see http://www.cisco.com/smb

Cisco Small Business Product Documentation

For more information on Cisco Small Business SPA500, see www.cisco.com/go/spa500phones

For more information on Regulatory Compliance and Safety Information for the Cisco SPA300 Series and Cisco SPA500 Series IP Phones, see

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/csbpipp/ip_phones/regulatory_compliance/guide/rcsi_SPA300_SPA500.pdf

Software Compatibility

For SPA51xG, the openssl upgrades from 0.9.7k to openssl 0.9.8zc.

New and Changed Features

BLF Call Pickup Feature

If you configure the BLF call pickup function on a programmable line key, the user can select any registering line key explicitly to pick up the call, regardless of the "vid" setting.

For example: On UUT, register Ext 1 and 2 to server, and map line key 1 and 2 to Ext 1 and 2 respectively. On sidecar, set < Unit 1 Key 1 > = "fnc=sd+cp+blf;sub=1000@192.168.0.7;nme=1000;vid=1”.

When number 1000 receives an incoming call, line key 1 on UUT sidecar will keep flashing. The call can be answered on UUT ext 1 if user presses line key 1 directly.

If user selects UUT line key 2 (phone changes to dialing status) and presses sidecar line key 1, UUT will find a idle call appearance of Ext 2 to pick up the call. If no idle call is found on Ext 2, UUT uses the Ext line specified by "vid" to find the idle call, and the next behavior is the same as 7.5.5.

SSLv3 disable by default

The Enable SSLv3 feature allows the user to enable or disable the SSLv3. By default, SSLv3 is disabled. SSLv2 is always disabled.

Installation

This release contains no Installation information.

Caveats

Open Caveats

Identifier
Headline

CSCub46017

The SPA 30x/50x phone do not support font size 12, for Hebrew language.

CSCub68644

For SPA phones, option to add “+” sign is missing in the numeric inputs for PAB number entry.

CSCud52670

The SPA phones do not support Xuser and Xpassword.

CSCul58905

The SPA5x5 phone, displays the CFWD softkey for other call states (dialing), even if the CFWD service is disabled.

CSCun55744

For SPA5x5/51x phone, the string, “Blind transfer number” is missing in XML Dictionary.

Resolved Caveats

The following caveats are resolved after release 7.5.6.

Identifier
Headline

CSCur18371

The SPA500S phone re-orders lines, if the User ID is same for different domain in email address.

CSCuq75845

Cisco SPA 5XX and 525 Codec negotiation.

CSCuq41478

For SPA phones, No SUBSCRIBE messages for shared line after TCP disconnection

CSCuo56145

For SPA5x5/525 phone, CFWD indication tone is incorrect, after the CFWD on web GUI is enabled.

CSCup14106

For SPA5x5/SPA525 phone, there is no audio with SRTP key changes during a call.

CSCup33429

The SPA5x5/SPA525 phone, Call Pick on KEMS only works from the first registered SIP line.

CSCur69123

For SPA5x5/SPA525 phones Group Paging RTP transmits to intercom even after call ends.

CSCuq18187

For SAPA525/SPA5X5: 631101733:No transfer softkey when the incoming call is anonymous.

CSCur53211

For SPA5x5 phone Group Paging has issue with Symmetric RTP, set to yes in 7.5.6a.

CSCup33526

For TR69/104: HTTPS connection between ACS and SPA525/SPA51x is not working

CSCur27078

For SPA514G, BLF is broken in firmware 7.5.6.

CSCup82037

The SPA5x5 SCA Line seizure - phone reboot issue.

CSCur44052

The SPA5x5 Phone freeze after group paging call.

Documentation, Service Requests, and Additional Information

For more information on Cisco Small Business Support Community, see http://www.cisco.com/go/smallbizsupport

For more information on Cisco Small Business Support and Resources, see http://www.cisco.com/go/smallbizhelp

To access the Phone Support Contacts, see http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html

For downloading the documents, see http://www.cisco.com/go/smallbizfirmware

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation at: http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html.

Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation as an RSS feed and delivers content directly to your desktop using a reader application. The RSS feeds are a free service.

This document is to be used in conjunction with the documents listed in the “Related Documentation” section.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

© 2015 Cisco Systems, Inc. All rights reserved.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco