Interface Reference Guide for Cisco Unity Connection Administration Release 9.x
Cisco Unity Connection 9.x Dial Plan Settings
Downloads: This chapterpdf (PDF - 89.0KB) The complete bookPDF (PDF - 3.47MB) | Feedback

Table of Contents

Cisco Unity Connection 9.x Dial Plan Settings

Search Partitions

New Partition

Edit Partition

Search Search Spaces

New Search Space

Edit Search Space

Cisco Unity Connection 9.x Dial Plan Settings

See the following sections:

Search Partitions

 

Table 10-1 Search Partitions Page

Field
Description

Limit Search To

(Applicable to Cisco Unity Connection configurations only.) Select the criteria by which to limit the display of search results:

  • All—Display all search results, regardless of the Cisco Unity Connection location to which they belong.
  • Location—Display only results that belong to a particular Connection location. When you select this option, choose the name of the location from the Where Name Is list.

Name

(Display only) The name of the object. Select the Name to go to the specific page for that object.

Delete Selected

To delete a partition, check the check box to the left of the display name, and select Delete Selected. You can delete multiple partitions at once.

Add New

To add a partition, select the Add New button. A new page opens, on which you enter data applicable to the new partition.

See Also

New Partition

 

Table 10-2 New Partition Page

Field
Description

Name

Enter a descriptive name for the partition.


Note With Connection 9.1(1) and later, you can also create the partition that corresponds to a Cisco Unity Connection Survivable Remote Site Voicemail (SRSV) or a branch Connection server.


See Also

Edit Partition

 

Table 10-3 Edit Partition Page

Field
Description

Name

Enter a descriptive name for the partition.

Description

Enter a description for the partition.

See Also

Search Search Spaces

 

Table 10-4 Search Search Spaces Page

Field
Description

Limit Search To

(Applicable to Cisco Unity Connection configurations only.) Select the criteria by which to limit the display of search results:

  • All—Display all search results, regardless of the Cisco Unity Connection location to which they belong.
  • Location—Display only results that belong to a particular Connection location. When you select this option, choose the name of the location from the Where Name Is list.

Delete Selected

To delete a search space, check the check box to the left of the display name, and select Delete Selected. You can delete multiple search spaces at once.

Name

(Display only) The name of the search space. Select the Name to go to the specific page for that search space.

See Also

New Search Space

 

Table 10-5 New Search Space Page

Field
Description

Name

Enter a descriptive name for the search space.

See Also

Edit Search Space

 

Table 10-6 Edit Search Space Page

Field
Description

Name

Enter a descriptive name for the search space.

Description

Enter a description for the search space.

Assigned Partitions

The ordered list of partitions that define the search space.

To change the order of partitions in the Assigned Partitions list, select the name of the partition to move, then select the up or down arrow to the right of the list.

To remove a partition from the Assigned Partitions list, select the name of the partition in the list, then select the down arrow below the list.

Unassigned Partitions

The list of partitions that are not part of the search space.

To add a partition to the list of partitions assigned to the search space, select the name of the partition in the Unassigned Partitions list, then select the up arrow above the list.

See Also