User Workstation Setup Guide for Cisco Unity Connection Release 8.x
Setting Up Access to the Cisco Personal Communications Assistant in Cisco Unity Connection 8.x
Downloads: This chapterpdf (PDF - 112.0KB) The complete bookPDF (PDF - 1.13MB) | Feedback

Setting Up Access to the Cisco Personal Communications Assistant in Cisco Unity Connection 8.x

Table Of Contents

Setting Up Access to the Cisco Personal Communications Assistant in Cisco Unity Connection 8.x

Configuring a Web Browser to Access the Cisco PCA in Cisco Unity Connection 8.x

Apple Safari

Microsoft Internet Explorer

Mozilla Firefox

Changing the GUI Language for the Cisco PCA in Cisco Unity Connection 8.x

Customizing the Cisco Unity Connection 8.0 Messaging Inbox for a Low-Bandwidth Deployment

Managing Security Alerts When Using Self-Signed Certificates with SSL Connections in Cisco Unity Connection 8.x


Setting Up Access to the Cisco Personal Communications Assistant in Cisco Unity Connection 8.x


Revised November 16, 2010

The Cisco Personal Communications Assistant (PCA) is installed on the Cisco Unity Connection server during installation. It is a website that provides users with access to the Cisco Unity web tools, which allow users to manage messages and personal preferences in Connection. The web tools available in the Cisco PCA include:

Cisco Unity Connection Messaging Assistant

Cisco Unity Connection Messaging Inbox (in Connection 8.0)

Cisco Unity Connection Personal Call Transfer Rules

To learn more about the tools listed above, see the applicable User Guide for Cisco Unity Connection and the Help for each tool.

See the following sections:

Configuring a Web Browser to Access the Cisco PCA in Cisco Unity Connection 8.x

Changing the GUI Language for the Cisco PCA in Cisco Unity Connection 8.x

Customizing the Cisco Unity Connection 8.0 Messaging Inbox for a Low-Bandwidth Deployment

Managing Security Alerts When Using Self-Signed Certificates with SSL Connections in Cisco Unity Connection 8.x

Configuring a Web Browser to Access the Cisco PCA in Cisco Unity Connection 8.x

The browsers on each user workstation must be set up to use the Cisco PCA and the Cisco Unity Connection web tools. See the applicable section, depending on the browser installed on the computer:

Apple Safari

Microsoft Internet Explorer

Mozilla Firefox

(For the list of versions supported for each browser, see the Compatibility Matrix: Cisco Unity Connection and the Software on User Workstations, available at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/compatibility/matrix/cucclientmtx.html.)

Apple Safari

Do the following tasks to set up Safari for accessing the Cisco PCA.

1. Confirm that the software required for correct browser configuration is installed. See the "Software Requirements—User Workstations" section of the System Requirements for Cisco Unity Connection Release 8.x, available at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/requirements/8xcucsysreqs.html.

2. Configure Safari:

a. Enable Java.

b. Enable Java Script.

c. Accept cookies only from sites that you navigate to.

Microsoft Internet Explorer

Do the following tasks to set up Internet Explorer for accessing the Cisco PCA.

1. Confirm that the software required for correct browser configuration is installed. See the "Software Requirements—User Workstations" section of the System Requirements for Cisco Unity Connection Release 8.x, available at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/requirements/8xcucsysreqs.html.

2. Configure Internet Explorer:

a. Enable Active scripting.

b. Download and run ActiveX controls.

c. Enable Java scripting.

d. Accept all cookies.

e. Automatically check for newer versions of temporary Internet files.

f. Enable Medium-High privacy.

Mozilla Firefox

Do the following tasks to set up Firefox for accessing the Cisco PCA.

1. Confirm that the software required for correct browser configuration is installed. See the "Software Requirements—User Workstations" section of the System Requirements for Cisco Unity Connection Release 8.x, available at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/requirements/8xcucsysreqs.html.

2. If users are running Firefox on Apple MAC OS X or Microsoft Windows workstations, skip to Task 3.

If users are running Firefox on Linux Red Hat workstations, confirm that they are using the correct sound card by referring to the sound card support matrix on the Alsa-project.org website. (Note that the Java Runtime Environment (JRE) plug-in software uses the Advanced Linux Sound Architecture (ALSA) driver to access system sound devices and to control playback and recording functionality. Depending on the sound card, playback and recording capabilities may be limited.)

3. Configure Firefox:

a. Enable Java.

b. Enable Java Script > Enable Change Images in Java Script Advanced.

c. Allow sites to set cookies. (For security purposes, we recommend that you set this to Allow Sites to Set Cookies for the Originating Web Site Only.)

Changing the GUI Language for the Cisco PCA in Cisco Unity Connection 8.x

Revised November 16, 2010

Do the following tasks to change the GUI language that is used in the Cisco PCA.

1. Download and install the applicable languages. For instructions, see the applicable documentation:

For a new Connection server, see the "Installing Additional Languages on the Cisco Unity Connection 8.x Server" chapter of the Installation Guide for Cisco Unity Connection at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/installation/guide/8xcucigx.html.

For an existing Connection server, see the "Adding or Removing Cisco Unity Connection 8.x Languages" chapter of the Reconfiguration and Upgrade Guide for Cisco Unity Connection at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/upgrade/guide/8xcucrugx.html.

2. On the user workstation, select a language in the web browser. The language selected in the browser must be one of the languages that the Cisco PCA offers and it must be installed on the Connection server. For a list of supported languages, see the "Available Languages for Cisco Unity Connection Components" section of the applicable System Requirements document:

System Requirements for Cisco Unity Connection Release 8.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/requirements/8xcucsysreqs.html

System Requirements for Cisco Unity Connection in Cisco Unified CMBE Release 8.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/requirements/8xcucmbesysreqs.html

Customizing the Cisco Unity Connection 8.0 Messaging Inbox for a Low-Bandwidth Deployment

Revised November 16, 2010

If users play recordings by using computer speakers in a low-bandwidth deployment (for example, with a slow modem or in a branch office), they should download messages before playing them for best performance and quality.

To customize the Cisco Unity Connection Messaging Inbox (in Connection 8.0) so that messages are downloaded rather than streamed from the Connection server during playback, do the following procedure to change the Performance setting on each user workstation (as applicable).

To Customize the Cisco Unity Connection 8.0 Messaging Inbox to Download Messages Before Playing Them


Step 1 On the Cisco PCA Home page, select the Messaging Inbox link.

Step 2 In the Messaging Inbox, go to a page that contains the Media Master. (For example, select the New Message icon to open a new message window.)

Step 3 On the Media Master Options menu, select Playback & Recording.

Step 4 In the Playback and Recording Settings dialog box, under Performance, select Download Complete Message Before Playing.

Step 5 Select OK.


Managing Security Alerts When Using Self-Signed Certificates with SSL Connections in Cisco Unity Connection 8.x

If you use the self-signed certificate generated during installation to provide an SSL connection to the Cisco PCA, the web browser of the user displays a message to alert the user that the authenticity of the site cannot be verified, and therefore its content cannot be trusted. Similarly, if you use a self-signed SSL certificate to secure IMAP email client access to Connection, some email clients supported for use with Connection display SSL security messages.

Although users can still access Connection despite the alerts, consider one of the following options to manage or eliminate security alerts when users browse to the Cisco PCA and/or access their messages from an IMAP email client:

Add the SSL certificate to the Trusted Root Store on each user workstation. In this way, you can ensure that users never see the security alert. Do the following "To Add the SSL Certificate to the Trusted Root Store on User Workstations" procedure.

Tell users to choose the "Accept Permanently" (or similar) option when the browser or email client displays the alert and asks them how to proceed. After instructing the browser and/or email client to always accept the certificate, the user will not see the alert again.

Do the following procedure if you want users to never see the security alert.

To Add the SSL Certificate to the Trusted Root Store on User Workstations


Step 1 From the OS Administration application on the Cisco Unity Connection server, right-click to download the certificate and save it as a file.

Step 2 Copy the certificate to each user workstation, and then import it by using tools in the browser or IMAP client, as applicable.