Cisco Unified Communications Manager SIP Trunk Integration Guide for Cisco Unity Connection Release 8.x
Downloads: This chapterpdf (PDF - 93.0 KB) The complete bookPDF (PDF - 3.12 MB) | Feedback

Table Of Contents

A - C - E - F - M - P - R - S - T - U - V -



Allow TRAP Connections (port setting) 2-2

Answer Calls (port setting) 2-2


call information 1-1

CiscoUnified CM, supported versions for SIP trunk integrations 1-1

Cisco Unified CM 5.x

creating a new integration 3-18

phone system programming instructions 3-3

requirements 3-2

task list, creating a SIP trunk integration 3-1

Cisco Unified CM 6.x

creating a new integration 4-18

phone system programming instructions 4-3

requirements 4-2

task list, creating a SIP trunk integration 4-1

Cisco Unified CM 7.x

creating a new integration 5-18

phone system programming instructions 5-3

requirements 5-2

task list, creating a SIP trunk integration 5-1

Cisco Unified CM 8.x

creating a new integration 6-19

phone system programming instructions 6-3

requirements 6-2

task list, creating a SIP trunk integration 6-1

CiscoUnified CM Express, adding to a Cisco Unified CM integration A-1

CiscoUnified Survivable Remote Site Telephony (SRST) router, impact on integration 1-2


Enabled (port setting) 2-2


features provided by integration 1-2

forwarded calls, information sent by phone system 1-1


multiple integrations

about 1-3

adding new user template 8-1


Perform Message Notification (port setting) 2-2

phone systems, supported for SIP trunk integrations 1-1


considerations for Cisco Unity Connection cluster 2-3

planning how many will answer calls 2-3

planning how many will dial out 2-3

planning number to install 2-2

planning setup 2-1

settings 2-2


RDNIS, impact of non-delivery on integration 1-2


Send MWI Requests (port setting) 2-2

Server Name (port setting) 2-2

SRST, impact on integration functionality 1-2

supported phone systems 1-1


template, adding a new user template for multiple integrations 8-1


deleting the test user 7-4

setting up supervised transfer 7-3

setting up test configuration 7-1

testing an external call with release transfer 7-2

testing supervised transfer 7-3

testing the functionality for listening to messages 7-3


user template, adding new for multiple integrations 8-1


voice messaging ports, settings 2-2