Upgrade Guide for Cisco Unity Connection Release 7.x
Changing the IP Addresses of Cisco Unity Connection 7.x Servers
Downloads: This chapterpdf (PDF - 223.0KB) The complete bookPDF (PDF - 2.41MB) | Feedback

Changing the IP Addresses of Cisco Unity Connection 7.x Servers

Table Of Contents

Changing the IP Addresses of Cisco Unity Connection 7.x Servers

Determining Whether a Connection 7.x Server Is Defined by a Host Name or an IP Address

Associated Components on Which the IP Address of a Connection 7.x Server Must Be Changed

Changing the IP Address of a Single 7.x Server That Is Defined by a Hostname (No Connection Cluster)

Changing the IP Address of a Single 7.x Server That Is Defined by an IP Address (No Connection Cluster)

Changing the IP Address of a 7.x Publisher Server That Is Defined by a Host Name

Changing the IP Address of a 7.x Publisher Server That Is Defined by an IP Address

Changing the IP Address of a 7.x Subscriber Server That Is Defined by a Host Name

Changing the IP Address of a 7.x Subscriber Server That Is Defined by an IP Address


Changing the IP Addresses of Cisco Unity Connection 7.x Servers


This chapter contains the following sections:

Determining Whether a Connection 7.x Server Is Defined by a Host Name or an IP Address

Associated Components on Which the IP Address of a Connection 7.x Server Must Be Changed

Changing the IP Address of a Single 7.x Server That Is Defined by a Hostname (No Connection Cluster)

Changing the IP Address of a Single 7.x Server That Is Defined by an IP Address (No Connection Cluster)

Changing the IP Address of a 7.x Publisher Server That Is Defined by a Host Name

Changing the IP Address of a 7.x Publisher Server That Is Defined by an IP Address

Changing the IP Address of a 7.x Subscriber Server That Is Defined by a Host Name

Changing the IP Address of a 7.x Subscriber Server That Is Defined by an IP Address

Determining Whether a Connection 7.x Server Is Defined by a Host Name or an IP Address

Revised June 5, 2009

The procedure you use to change the IP address of a Connection server depends on whether the server is defined by a host name or by an IP address.

To Determine Whether a Connection 7.x Server Is Defined by a Host Name or an IP Address


Step 1 On the server whose IP address you want to change, log onto Cisco Unity Connection Administration.

Step 2 Expand System Settings, and click Cluster.

You go to the Cluster page even when no cluster is configured.

Step 3 Click Find to display a list of servers in the cluster.

Step 4 For the server whose IP address you want to change, if the value of the Host Name/IP Address column is a host name, the server is defined by a host name.

If the value of the Host Name/IP Address column is an IP address, the server is defined by an IP address.


Associated Components on Which the IP Address of a Connection 7.x Server Must Be Changed

When you change the IP address of the Connection server, you must also make the same change on all associated components that reference the Connection server by IP address:

Bookmarks on client computers to the following web applications:

Cisco Personal Communications Assistant

Cisco Unity Connection Administration

Real-Time Monitoring Tool

Cisco Fax Server

Cisco Unified Application Environment

Cisco Unified Mobile Advantage

Cisco Unified Presence

Cisco Unified Personal Communicator

Cisco Unity Connection ViewMail for Microsoft Outlook

IMAP e-mail clients that access Connection

Phone systems and related components:

Cisco EGW 2200

Cisco ISR voice gateway

Cisco SIP Proxy Server

Cisco Unified Communications Manager

Cisco Unified Communications Manager Express

PIMG/TIMG units

RSS readers

SMTP smart host

Voice-messaging systems with which Connection is integrated via VPIM, including:

Cisco Unity

Cisco Unity Express

Changing the IP Address of a Single 7.x Server That Is Defined by a Hostname (No Connection Cluster)

Revised June 5, 2009

Caution Do not change the IP address of a Connection server during business hours. The server must be restarted for changes to take effect.

To Change the IP Address of a Single 7.x Server That Is Defined by a Hostname (No Connection Cluster)


Step 1 Review the list of associated components on which you also need to change the IP address of the Connection server if those components reference Connection by IP address. See the "Associated Components on Which the IP Address of a Connection 7.x Server Must Be Changed" section.


Caution If associated components reference the Connection server by IP address and if you do not change the IP address as applicable, the components will no longer be able to access the Connection server.

Step 2 In the Real-Time Monitoring Tool (RTMT) confirm that the server is running and available:

a. Using the RTMT, log onto the server.

b. In the left pane, under Tools, click Alert Central.

c. In the right pane, on the System tab, if ServerDown is black, skip to Step 3.

If ServerDown is red, right-click ServerDown, and click Alert Details. Resolve the problem before continuing.

Step 3 Log on to Cisco Unified Serviceability, and check the status of the server:

a. From the Tools menu, click Cluster Management.

b. In the Server Status column, confirm that the value for the current server is Primary. If the Server Status column has any other value, resolve the problem before continuing.

Step 4 Check network connectivity and DNS server configuration by running the following CLI command:

admin: utils diagnose module validate_network

Log file: /var/log/active/platform/log/diag1.log

Starting diagnostic test(s)

===========================

test - validate_network : Passed

Diagnostics Completed

admin:

Step 5 Back up the server by using the Disaster Recovery System. See the Disaster Recovery System Administration Guide for Cisco Unity Connection Release 7.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/drs_administration/guide/7xcucdrsag.html.

Step 6 If Digital Networking is configured, remove the server from the digital network. See the "Using Digital Networking" chapter of the System Administration Guide for Cisco Unity Connection Release 7.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/administration/guide/7xcucsagx.html.


Caution Readding a server to a digital network can be a time-consuming process. Ensure that you thoroughly understand the work required to readd a server to a digital network before you continue with this procedure.

Step 7 On a DNS server, change the DNS record of the server to the new IP address. Update both the forward (A) and reverse (PTR) records.

Step 8 Change the IP address of the server and, if applicable, the default gateway:

a. Log on to Cisco Unified Operating System Administration.

b. From the Settings menu, click IP > Ethernet.

c. Under Port Information, change the value of the IP Address field and, if applicable, the Subnet Mask field.

d. If you are moving the server to a different subnet that requires a new default gateway address, under Gateway Information, change the value of the Default Gateway field.

e. Click Save, and the system restarts.

Step 9 In the RTMT, confirm that the server is running and available:

a. Using the RTMT, log on to the server.

b. In the left pane, under Tools, click Alert Central.

c. In the right pane, on the System tab, if ServerDown is black, skip to Step 10.

If ServerDown is red, right-click ServerDown, and click Alert Details. Resolve the problem before continuing.

Step 10 Update RTMT custom alerts and saved profiles.

RTMT custom alerts that are derived from performance counters include the hard-coded server IP address. You must delete and reconfigure the custom alerts.

RTMT saved profiles that have performance counters include the hard-coded server IP address. You must delete and readd the counters and then save the profiles to update them to the new IP address.

Step 11 Check associated components and change configurations as required. (Consult documentation for the affected products to determine how to make the required changes.) See the "Associated Components on Which the IP Address of a Connection 7.x Server Must Be Changed" section.

Step 12 If the server was part of a digital network before you changed the IP address, readd the server to the digital network. See the "Using Digital Networking" chapter of the System Administration Guide for Cisco Unity Connection Release 7.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/administration/guide/7xcucsagx.html.

Step 13 Back up the server by using the Disaster Recovery System. See the Disaster Recovery System Administration Guide for Cisco Unity Connection at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/drs_administration/guide/7xcucdrsag.html.


Changing the IP Address of a Single 7.x Server That Is Defined by an IP Address (No Connection Cluster)

Added June 5, 2009

Caution Do not change the IP address of a Connection server during business hours. The server must be restarted for changes to take effect.

To Change the IP Address of a Single 7.x Server That Is Defined by an IP Address (No Connection Cluster)


Step 1 Review the list of associated components on which you also need to change the IP address of the Connection server if those components reference Connection by IP address. See the "Associated Components on Which the IP Address of a Connection 7.x Server Must Be Changed" section.


Caution If associated components reference the Connection server by IP address and if you do not change the IP address as applicable, the components will no longer be able to access the Connection server.

Step 2 In the Real-Time Monitoring Tool (RTMT) confirm that the server is running and available:

a. Using the RTMT, log onto the server.

b. In the left pane, under Tools, click Alert Central.

c. In the right pane, on the System tab, if ServerDown is black, skip to Step 3.

If ServerDown is red, right-click ServerDown, and click Alert Details. Resolve the problem before continuing.

Step 3 Log on to Cisco Unified Serviceability, and check the status of the server:

a. From the Tools menu, click Cluster Management.

b. In the Server Status column, confirm that the value for the current server is Primary. If the Server Status column has any other value, resolve the problem before continuing.

Step 4 Check network connectivity and DNS server configuration by running the following CLI command:

admin: utils diagnose module validate_network

Log file: /var/log/active/platform/log/diag1.log

Starting diagnostic test(s)

===========================

test - validate_network : Passed

Diagnostics Completed

admin:

Step 5 Back up the server by using the Disaster Recovery System. See the Disaster Recovery System Administration Guide for Cisco Unity Connection Release 7.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/drs_administration/guide/7xcucdrsag.html.

Step 6 If Digital Networking is configured, remove the server from the digital network. See the "Using Digital Networking" chapter of the System Administration Guide for Cisco Unity Connection Release 7.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/administration/guide/7xcucsagx.html.


Caution Readding a server to a digital network can be a time-consuming process. Ensure that you thoroughly understand the work required to readd a server to a digital network before you continue with this procedure.

Step 7 On a DNS server, change the DNS record of the server to the new IP address. Update both the forward (A) and reverse (PTR) records.

Step 8 Change the IP addresses of the server in Connection Administration:

a. Log on to Cisco Unity Connection Administration.

b. Expand System Settings, and click Cluster.

c. Click Find to display a list of servers in the cluster.

d. Click the name of the server.

e. Change the value of the Host Name/IP Address field to the new IP address.

f. Click Save.

Step 9 Change the IP address of the server and, if applicable, the default gateway:

a. Log on to Cisco Unified Operating System Administration.

b. From the Settings menu, click IP > Ethernet.

c. Under Port Information, change the value of the IP Address field and, if applicable, the Subnet Mask field.

d. If you are moving the server to a different subnet that requires a new default gateway address, under Gateway Information, change the value of the Default Gateway field.

e. Click Save, and the system restarts.

Step 10 In the RTMT, confirm that the server is running and available:

a. Using the RTMT, log on to the server.

b. In the left pane, under Tools, click Alert Central.

c. In the right pane, on the System tab, if ServerDown is black, skip to Step 10.

If ServerDown is red, right-click ServerDown, and click Alert Details. Resolve the problem before continuing.

Step 11 Update RTMT custom alerts and saved profiles.

RTMT custom alerts that are derived from performance counters include the hard-coded server IP address. You must delete and reconfigure the custom alerts.

RTMT saved profiles that have performance counters include the hard-coded server IP address. You must delete and readd the counters and then save the profiles to update them to the new IP address.

Step 12 Check associated components and change configurations as required. (Consult documentation for the affected products to determine how to make the required changes.) See the "Associated Components on Which the IP Address of a Connection 7.x Server Must Be Changed" section.

Step 13 If the server was part of a digital network before you changed the IP address, readd the server to the digital network. See the "Using Digital Networking" chapter of the System Administration Guide for Cisco Unity Connection Release 7.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/administration/guide/7xcucsagx.html.

Step 14 Back up the server by using the Disaster Recovery System. See the Disaster Recovery System Administration Guide for Cisco Unity Connection at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/drs_administration/guide/7xcucdrsag.html.


Changing the IP Address of a 7.x Publisher Server That Is Defined by a Host Name


Caution Do not change the IP address of a Connection server during business hours. When a Connection cluster is configured, both servers must be restarted for changes to take effect.

To Change the IP Address of a 7.x Publisher Server that Is Defined by a Host Name


Step 1 Review the list of associated components on which you also need to change the IP address of the Connection server if those components reference Connection by IP address. See the "Associated Components on Which the IP Address of a Connection 7.x Server Must Be Changed" section.


Caution If associated components reference the Connection server by IP address and if you do not change the IP address as applicable, the components will no longer be able to access the Connection server.

Step 2 In the Real-Time Monitoring Tool (RTMT), confirm that the publisher and subscriber servers are running and available:

a. Using the RTMT, log on to the publisher server.

b. In the left pane, under Tools, click Alert Central.

c. In the right pane, on the System tab, if ServerDown is black, skip to Step d.

If ServerDown is red, right-click ServerDown, and click Alert Details. Resolve the problem before continuing.

d. Repeat Step a. through Step c. on the subscriber server.

Step 3 On the publisher server, log on to Cisco Unified Serviceability, and check the status of the server:

a. From the Tools menu, click Cluster Management.

b. In the Server Status column, confirm that the value for the current server is either Primary or Secondary. If the Server Status column has any other value, resolve the problem before continuing.

Step 4 Check network connectivity and DNS server configuration by running the following CLI command:

admin: utils diagnose module validate_network

Log file: /var/log/active/platform/log/diag1.log

Starting diagnostic test(s)

===========================

test - validate_network : Passed

Diagnostics Completed

admin:

Step 5 Back up the server by using the Disaster Recovery System. See the Disaster Recovery System Administration Guide for Cisco Unity Connection Release 7.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/drs_administration/guide/7xcucdrsag.html.

Step 6 If Digital Networking is configured, remove the publisher server from the digital network. See the "Using Digital Networking" chapter of the System Administration Guide for Cisco Unity Connection Release 7.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/administration/guide/7xcucsagx.html.


Caution Readding a server to a digital network can be a time-consuming process. Ensure that you thoroughly understand the work required to readd a server to a digital network before you continue with this procedure.

Step 7 On a DNS server, change the DNS record of the publisher server to the new IP address. Update both the forward (A) and reverse (PTR) records.

Step 8 On the subscriber server, change the IP address of the publisher server:

a. Log on to Cisco Unified Operating System Administration.

b. From the Settings menu, click IP > Publisher.

c. Change the IP address of the publisher server.

d. Click Save.

Step 9 On the publisher server, change the IP address of the publisher server and, if applicable, the default gateway:

a. Log on to Cisco Unified Operating System Administration.

b. From the Settings menu, click IP > Ethernet.

c. Under Port Information, change the value of the IP Address field and, if applicable, the Subnet Mask field.

d. If you are moving the publisher server to a different subnet that requires a new default gateway address, under Gateway Information, change the value of the Default Gateway field.

e. Click Save, and the system restarts.

Step 10 Log on to the subscriber server by using an SSH application, and run the CLI command utils system restart to restart the server, which updates the local name resolution files.

Step 11 In the RTMT, confirm that the publisher and subscriber servers are running and available:

a. Using the RTMT, log on to the publisher server.

b. In the left pane, under Tools, click Alert Central.

c. In the right pane, on the System tab, if ServerDown is black, skip to Step d.

If ServerDown is red, right-click ServerDown, and click Alert Details. Resolve the problem before continuing.

d. Repeat Step a. through Step c. on the subscriber server.

Step 12 Update RTMT custom alerts and saved profiles.

RTMT custom alerts that are derived from performance counters include the hard-coded server IP address. You must delete and reconfigure the custom alerts.

RTMT saved profiles that have performance counters include the hard-coded server IP address. You must delete and readd the counters and then save the profiled to update them to the new IP address.

Step 13 Check associated components and change configurations as required. (Consult documentation for the affected products to determine how to make the required changes.) See the "Associated Components on Which the IP Address of a Connection 7.x Server Must Be Changed" section.

Step 14 If the publisher server was part of a digital network before you changed the IP address of this server, readd the server to the digital network. See the "Using Digital Networking" chapter of the System Administration Guide for Cisco Unity Connection Release 7.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/administration/guide/7xcucsagx.html.

Step 15 Back up the server by using the Disaster Recovery System. See the Disaster Recovery System Administration Guide for Cisco Unity Connection Release 7.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/drs_administration/guide/7xcucdrsag.html.


Changing the IP Address of a 7.x Publisher Server That Is Defined by an IP Address


Caution Do not change the IP address of a Connection server during business hours. When a Connection cluster is configured, both servers must be restarted for changes to take effect.

To Change the IP Address of a 7.x Publisher Server that Is Defined by an IP Address


Step 1 Review the list of associated components on which you also need to change the IP address of the Connection server if those components reference Connection by IP address. See the "Associated Components on Which the IP Address of a Connection 7.x Server Must Be Changed" section.


Caution If associated components reference the Connection server by IP address and if you do not change the IP address as applicable, the components will no longer be able to access the Connection server.

Step 2 In the Real-Time Monitoring Tool (RTMT), confirm that the publisher and subscriber servers are running and available:

a. Using the RTMT, log on to the publisher server.

b. In the left pane, under Tools, click Alert Central.

c. In the right pane, on the System tab, if ServerDown is black, skip to Step d.

If ServerDown is red, right-click ServerDown, and click Alert Details. Resolve the problem before continuing.

d. Repeat Step a. through Step c. on the subscriber server.

Step 3 On the publisher server, log on to Cisco Unified Serviceability, and check the status of the server:

a. From the Tools menu, click Cluster Management.

b. In the Server Status column, confirm that the value for the current server is either Primary or Secondary. If the Server Status column has any other value, resolve the problem before continuing.

Step 4 Check network connectivity and DNS server configuration by running the following CLI command:

admin: utils diagnose module validate_network

Log file: /var/log/active/platform/log/diag1.log

Starting diagnostic test(s)

===========================

test - validate_network : Passed

Diagnostics Completed

admin:

Step 5 If Digital Networking is configured, remove the publisher server from the digital network. See the "Using Digital Networking" chapter of the System Administration Guide for Cisco Unity Connection Release 7.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/administration/guide/7xcucsagx.html.


Caution Readding a server to a digital network can be a time-consuming process. Ensure that you thoroughly understand the work required to readd a server to a digital network before you continue with this procedure.

Step 6 Back up the server by using the Disaster Recovery System. See the Disaster Recovery System Administration Guide for Cisco Unity Connection Disaster Recovery System Administration Guide for Cisco Unity Connection Release 7.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/drs_administration/guide/7xcucdrsag.html.

Step 7 On the publisher server, change the IP addresses of the publisher server in Connection Administration:

a. Log on to Cisco Unity Connection Administration.

b. Expand System Settings, and click Cluster.

c. Click Find to display a list of servers in the cluster.

d. Click the name of the publisher server.

e. Change the value of the Host Name/IP Address field to the new IP address.

f. Click Save.

Step 8 On the publisher server, change the IP address of the publisher server and, if applicable, the default gateway in Cisco Unified Operating System Administration:

a. Log on to Cisco Unified Operating System Administration.

b. From the Settings menu, click IP > Ethernet.

c. Under Port Information, change the value of the IP Address field and, if applicable, the Subnet Mask field.

d. If you are moving the publisher server to a different subnet that requires a new default gateway address, under Gateway Information, change the value of the Default Gateway field.

e. Click Save, and the system restarts.

Step 9 On the subscriber server, change the IP address of the publisher server:

a. Log on to Cisco Unified Operating System Administration.

b. From the Settings menu, click IP > Publisher.

c. Change the IP address of the publisher server.

d. Click Save.

Step 10 Log on to the subscriber server by using an SSH application, and run the CLI command utils system restart to restart the server, which updates the local name resolution files.

Step 11 In the RTMT, confirm that the publisher and subscriber servers are running and available:

a. Using the RTMT, log on to the publisher server.

b. In the left pane, under Tools, click Alert Central.

c. In the right pane, on the System tab, if ServerDown is black, skip to Step d.

If ServerDown is red, right-click ServerDown, and click Alert Details. Resolve the problem before continuing.

d. Repeat Step a. through Step c. on the subscriber server.

Step 12 Update RTMT custom alerts and saved profiles.

RTMT custom alerts that are derived from performance counters include the hard-coded server IP address. You must delete and reconfigure the custom alerts.

RTMT saved profiles that have performance counters include the hard-coded server IP address. You must delete and readd the counters and then save the profiles to update them to the new IP address.

Step 13 Check associated components and change configurations as required. (Consult documentation for the affected products to determine how to make the required changes.) See the "Associated Components on Which the IP Address of a Connection 7.x Server Must Be Changed" section.

Step 14 If the publisher server was part of a digital network before you changed the IP address of this server, readd the server to the digital network. See the "Using Digital Networking" chapter of the System Administration Guide for Cisco Unity Connection Release 7.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/administration/guide/7xcucsagx.html.

Step 15 Back up the server using the Disaster Recovery System. See the Disaster Recovery System Administration Guide for Cisco Unity Connection Release 7.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/drs_administration/guide/7xcucdrsag.html.


Changing the IP Address of a 7.x Subscriber Server That Is Defined by a Host Name


Caution Do not change the IP address of a Connection server during business hours. When a Connection cluster is configured, both servers must be restarted for changes to take effect.

To Change the IP Address of a 7.x Subscriber Server that Is Defined by a Host Name


Step 1 Review the list of associated components on which you also need to change the IP address of the Connection server if those components reference Connection by IP address. See the "Associated Components on Which the IP Address of a Connection 7.x Server Must Be Changed" section.


Caution If associated components reference the Connection server by IP address and if you do not change the IP address as applicable, the components will no longer be able to access the Connection server.

Step 2 In the Real-Time Monitoring Tool (RTMT), confirm that the publisher and subscriber servers are running and available:

a. Using the RTMT, log on to the publisher server.

b. In the left pane, under Tools, click Alert Central.

c. In the right pane, on the System tab, if ServerDown is black, skip to Step d.

If ServerDown is red, right-click ServerDown, and click Alert Details. Resolve the problem before continuing.

d. Repeat Step a. through Step c. on the subscriber server.

Step 3 On the subscriber server, log on to Cisco Unified Serviceability, and check the status of the server:

a. From the Tools menu, click Cluster Management.

b. In the Server Status column, confirm that the value for the current server is either Primary or Secondary. If the Server Status column has any other value, resolve the problem before continuing.

Step 4 Check network connectivity and DNS server configuration by running the following CLI command:

admin: utils diagnose module validate_network

Log file: /var/log/active/platform/log/diag1.log

Starting diagnostic test(s)

===========================

test - validate_network : Passed

Diagnostics Completed

admin:

Step 5 Back up the server by using the Disaster Recovery System. See the Disaster Recovery System Administration Guide for Cisco Unity Connection Release 7.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/drs_administration/guide/7xcucdrsag.html.

Step 6 On a DNS server, change the DNS record of the subscriber server to the new IP address. Update both the forward (A) and reverse (PTR) records.

Step 7 Confirm that the DNS change propagates to the publisher server by using the following two CLI commands on the subscriber server and the publisher server:

utils network host

show tech network hosts

Step 8 On the subscriber server, change the IP address of the subscriber server and, if applicable, the default gateway:

a. Log on to Cisco Unified Operating System Administration.

b. From the Settings menu, click IP > Ethernet.

c. Under Port Information, change the value of the IP Address field and, if applicable, the Subnet Mask field.

d. If you are moving the publisher server to a different subnet that requires a new default gateway address, under Gateway Information, change the value of the Default Gateway field.

e. Click Save, and the system restarts.

Step 9 Log on to the publisher server by using an SSH application, and run the CLI command utils system restart to restart the server, which updates the local name resolution files.

Step 10 In the RTMT, confirm that the publisher and subscriber servers are running and available:

a. Using the RTMT, log on to the publisher server.

b. In the left pane, under Tools, click Alert Central.

c. In the right pane, on the System tab, if ServerDown is black, skip to Step d.

If ServerDown is red, right-click ServerDown, and click Alert Details. Resolve the problem before continuing.

d. Repeat Step a. through Step c. on the subscriber server.

Step 11 Update RTMT custom alerts and saved profiles.

RTMT custom alerts that are derived from performance counters include the hard-coded server IP address. You must delete and reconfigure the custom alerts.

RTMT saved profiles that have performance counters include the hard-coded server IP address. You must delete and readd the counters and then save the profiles to update them to the new IP address.

Step 12 Check associated components and change configurations as required. (Consult documentation for the affected products to determine how to make the required changes.) See the "Associated Components on Which the IP Address of a Connection 7.x Server Must Be Changed" section.

Step 13 Back up the publisher server using the Disaster Recovery System. See the Disaster Recovery System Administration Guide for Cisco Unity Connection Release 7.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/drs_administration/guide/7xcucdrsag.html.


Changing the IP Address of a 7.x Subscriber Server That Is Defined by an IP Address


Caution Do not change the IP address of a Connection server during business hours. When a Connection cluster is configured, both servers must be restarted for changes to take effect.

To Change the IP Address of a 7.x Subscriber Server that Is Defined by an IP Address


Step 1 Review the list of associated components on which you also need to change the IP address of the Connection server if those components reference Connection by IP address. See the "Associated Components on Which the IP Address of a Connection 7.x Server Must Be Changed" section.


Caution If associated components reference the Connection server by IP address and if you do not change the IP address as applicable, the components will no longer be able to access the Connection server.

Step 2 In the Real-Time Monitoring Tool (RTMT), confirm that the publisher and subscriber servers are running and available:

a. Using the RTMT, log on to the publisher server.

b. In the left pane, under Tools, click Alert Central.

c. In the right pane, on the System tab, if ServerDown is black, skip to Step d.

If ServerDown is red, right-click ServerDown, and click Alert Details. Resolve the problem before continuing.

d. Repeat Step a. through Step c. on the subscriber server.

Step 3 On the subscriber server, log on to Cisco Unified Serviceability, and check the status of the server:

a. From the Tools menu, click Cluster Management.

b. In the Server Status column, confirm that the value for the current server is either Primary or Secondary. If the Server Status column has any other value, resolve the problem before continuing.

Step 4 Check network connectivity and DNS server configuration by running the following CLI command:

admin: utils diagnose module validate_network

Log file: /var/log/active/platform/log/diag1.log

Starting diagnostic test(s)

===========================

test - validate_network : Passed

Diagnostics Completed

admin:

Step 5 Back up the server by using the Disaster Recovery System. See the Disaster Recovery System Administration Guide for Cisco Unity Connection Release 7.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/drs_administration/guide/7xcucdrsag.html.

Step 6 On the publisher server, change the IP addresses of the subscriber server:

a. Log on to Cisco Unity Connection Administration.

b. Expand System Settings, and click Cluster.

c. Click Find to display a list of servers in the cluster.

d. Click the name of the subscriber server.

e. Change the value of the Host Name/IP Address field to the new IP address.

f. Click Save.

Step 7 On the subscriber server, change the IP address of the subscriber server and, if applicable, the default gateway:

a. Log on to Cisco Unified Operating System Administration.

b. From the Settings menu, click IP > Ethernet.

c. Under Port Information, change the value of the IP Address field and, if applicable, the Subnet Mask field.

d. If you are moving the publisher server to a different subnet that requires a new default gateway address, under Gateway Information, change the value of the Default Gateway field.

e. Click Save, and the system restarts.

Step 8 Log on to the publisher server by using an SSH application, and run the CLI command utils system restart to restart the server, which updates the local name resolution files.

Step 9 In the RTMT, confirm that the publisher and subscriber servers are running and available:

a. Using the RTMT, log on to the publisher server.

b. In the left pane, under Tools, click Alert Central.

c. In the right pane, on the System tab, if ServerDown is black, skip to Step d.

If ServerDown is red, right-click ServerDown, and click Alert Details. Resolve the problem before continuing.

d. Repeat Step a. through Step c. on the subscriber server.

Step 10 Update RTMT custom alerts and saved profiles.

RTMT custom alerts that are derived from performance counters include the hard-coded server IP address. You must delete and reconfigure the custom alerts.

RTMT saved profiles that have performance counters include the hard-coded server IP address. You must delete and readd the counters and then save the profiles to update them to the new IP address.

Step 11 Check associated components and change configurations as required. (Consult documentation for the affected products to determine how to make the required changes.) See the "Associated Components on Which the IP Address of a Connection 7.x Server Must Be Changed" section.

Step 12 Back up the server by using the Disaster Recovery System. See the Disaster Recovery System Administration Guide for Cisco Unity Connection Release 7.x at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/drs_administration/guide/7xcucdrsag.html.