User Moves, Adds, and Changes Guide for Cisco Unity Connection Release 10.x
Setting Up Features and Functionality Controlled By Class of Service in Cisco Unity Connection 10.x
Downloads: This chapterpdf (PDF - 651.0KB) The complete bookPDF (PDF - 2.47MB) | Feedback

Table of Contents

Setting Up Features and Functionality Controlled By Class of Service in Cisco Unity Connection 10.x

Access to Voice Messages in Unity Connection 10.x from the Cisco Unified Personal Communicator

Alternate Extensions in Unity Connection 10.x

Call Screening and Call Holding in Unity Connection 10.x

Unity Connection 10.x Messaging Assistant

Unity Connection 10.x Web Inbox, Messaging Inbox, and RSS Feeds

Deleted Message Access in Unity Connection 10.x

Directory Listing in Unity Connection 10.x

Greeting Length in Unity Connection 10.x

IMAP Client Access to Voice Messages in Unity Connection 10.x

Live Reply in Unity Connection 10.x

Message Recording Length in Unity Connection 10.x

Personal Call Transfer Rules in Unity Connection 10.x

About the Personal Call Transfer Rules Web Tool

Enabling and Disabling the Personal Call Transfer Rules Feature

Private Distribution Lists in Unity Connection 10.x

Maximum Number of Private Lists Available to Users

Maximum Number of Members Per Private List

Recorded Name and Length in Unity Connection 10.x

Restriction Tables in Unity Connection 10.x

Secure Messages in Unity Connection 10.x

Sending Messages to System Distribution Lists in Unity Connection 10.x

Single Inbox

SpeechView Transcriptions of Voice Messages in Unity Connection 10.x

Video Greetings in Unity Connection 10.x

Voice Recognition in Unity Connection 10.x

Setting Up Features and Functionality Controlled By Class of Service in Cisco Unity Connection 10.x

In Cisco Unity Connection, some of the features that are available to users with voice mailboxes are controlled by class of service (COS), including features for which you need user licenses. You can update the settings in a COS to enable or disable features and functionality at any time. The changes that you make affect all COS members.


NoteWhen a COS includes access to a feature that requires individual licenses, you can offer the feature to the members of the COS only if enough licenses are available.


See the following sections for information and procedures for setting up features and functionality that are controlled by COS:

Access to Voice Messages in Unity Connection 10.x from the Cisco Unified Personal Communicator

To enable Cisco Unity Connection users to play, sort, and delete voice messages from within the Cisco Unified Personal Communicator application, complete the following tasks in the order presented:

1. Configure the applicable servers, assign Unity Connection users to a COS in Cisco Unity Connection Administration that offers the feature, and set up the client applications, as described in the Installation Guide for Cisco Unified Personal Communicator , available at http://www.cisco.com/en/US/products/ps6844/tsd_products_support_series_home.html .

2. Optional but recommended: Configure the Unity Connection server to provide a secure IMAP connection, as described in the “ Configuring SSL in Cisco Unity Connection 10.x ” chapter of the System Administration Guide for Cisco Unity Connection Release 10.x , at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/10x/administration/guide/10xcucsagx.html .

3. For information on configuring the Cisco Unified Personal Communicator to access Unity Connection voice messages, refer users to the User Guide for Cisco Unified Personal Communicator at http://www.cisco.com/en/US/products/ps6844/tsd_products_support_series_home.html, or the Cisco Unified Personal Communicator Help.

Alternate Extensions in Unity Connection 10.x

While you specify alternate extensions for individual users on their account pages, COS settings allow you to determine whether users can view and/or manage alternate extensions, and whether they can use the Cisco Unity Connection Messaging Assistant and phone interface to manage a set of their own alternate extensions. Consider allowing users to specify their own set, so that you can reduce the number of requests to enter extensions for user mobile phones, home phones, and other phones. When you enable users to manage their own alternate extensions, they can specify up to ten alternate extensions in addition to those already specified for them by you.

Do the applicable procedure:

To learn how alternate extensions work and why you use them, see the “Alternate Extensions in Cisco Unity Connection 10.x” section.

To Specify Whether COS Members Can View and/or Manage Alternate Extensions in the Cisco Unity Connection Messaging Assistant


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Alternate Extensions, check either or both of the following check boxes:

    • Allow Users to View Administrator-Defined Alternate Extensions
    • Allow Users to Manage Their User-Defined Alternate Extensions

Step 3 Select Save .


 

To Specify Whether COS Members Can View and/or Manage Alternate Extensions in the Cisco Unity Connection Messaging Assistant for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Alternate Extensions, check the left-most check box of either or both of the following check boxes to select them, and then check the check boxes:

    • Allow Users to View Administrator-Defined Alternate Extensions
    • Allow Users to Manage Their User-Defined Alternate Extensions

Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 4 Select Submit .


 

Call Screening and Call Holding in Unity Connection 10.x

The Call Transfer settings in a COS specify whether users can use the Cisco Unity Connection Messaging Assistant or the Cisco Unity Connection Personal Call Transfer Rules web tool (as applicable) to change call screening and call holding options. (If users are enabled to use personal call transfer rules, they find screening and holding options in the Cisco Unity Connection Personal Call Transfer Rules web tool, not the Messaging Assistant.)

Screening and holding options allow users to specify how Cisco Unity Connection handles calls that are transferred from the automated attendant or a directory handler to user phones. The options that are potentially available to users differ depending on how you set up call transfers to work for each user account. (See the “Call Transfer, Call Screening, and Call Holding in Unity Connection 10.x” section for information on how call transfers work.)

Do the applicable procedure:

To Specify Whether COS Members Can Manage Call Screening and Call Holding Options


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Call Transfer, check one or both of the following check boxes:

    • Allow Users to Change Call Screening Options
    • Allow Users to Change Call Holding Options

Step 3 Select Save .


 

To Specify Whether COS Members Can Manage Call Screening and Call Holding Options for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Call Transfer, check the left-most check box of either or both of the following check boxes to select them, and then check the check boxes:

    • Allow Users to Change Call Screening Options
    • Allow Users to Change Call Holding Options

Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 4 Select Submit .


 

Unity Connection 10.x Messaging Assistant

The Cisco Unity Connection Messaging Assistant is a web tool available on the Cisco Personal Communications Assistant (PCA) website. The Messaging Assistant allows users to personalize their Unity Connection settings—including their greetings and message-delivery options—and to set up message-notification devices and to create private lists.

Do the applicable procedure:

For steps on configuring the browsers on user workstations to access any of the Cisco PCA web tools, see the “Configuring a Web Browser to Access the Cisco PCA in Cisco Unity Connection 10.x” section in the “ Setting Up Access to the Cisco Personal Communications Assistant in Cisco Unity Connection 10.x ” chapter of the User Workstation Setup Guide for Cisco Unity Connection Release 10.x , at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/10x/user_setup/guide/10xcucuwsx.html. .

To Enable COS Members to Access the Cisco Unity Connection Messaging Assistant


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Features, check the Allow Users to Use the Messaging Assistant check box.

Step 3 Select Save .


 

To Enable COS Members to Access the Cisco Unity Connection Messaging Assistant for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Features, check the left-most check box of the Allow Users to Use the Messaging Assistant field to select it, and then check the Allow Users to Use the Messaging Assistant check box.

Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 4 Select Submit .


 

Unity Connection 10.x Web Inbox, Messaging Inbox, and RSS Feeds

As a convenience to users who are not always able to check messages by phone, you can enable users to access the Cisco Unity Connection Web Inbox, Messaging Inbox, or RSS Feeds on their computers.


NoteWeb Inbox and RSS Feeds support both the IPv4 and IPv6 addresses. However, the IPv6 address works only when Connection platform is configured in Dual (IPv4/IPv6) mode. For more information on Configuring IPv6 settings, see Adding or Changing the IPv6 Addresses of Cisco Unity Connection chapter ofReconfiguration and Upgrade Guide for Cisco Unity Connection guide at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/10x/upgrade/guide/10xcucrug051.html.


Web Inbox allows users to play, compose, reply to or forward, and manage Connection voice messages by using a web browser. Note that users can address voice messages only to entries within their search scopes.

In Unity Connection, the Messaging Inbox is a web tool available on the Cisco Personal Communications Assistant (PCA) website. For steps on configuring the browsers on user workstations to access any of the Cisco PCA web tools, see the “Configuring a Web Browser to Access the Cisco PCA in Cisco Unity Connection 10.x” section in the “ Setting Up Access to the Cisco Personal Communications Assistant in Cisco Unity Connection 10.x ” chapter of the User Workstation Setup Guide for Cisco Unity Connection Release 10.x , at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/10x/user_setup/guide/10xcucuwsx.html .

RSS Feeds allow users to retrieve voice messages by using an RSS reader. For details on configuring the Unity Connection server for RSS Feeds, see the “Configuring Access to RSS Feeds of Voice Messages in Cisco Unity Connection 10.x” section in the “ Messaging in Cisco Unity Connection 10.x ” chapter of the System Administration Guide for Cisco Unity Connection Release 10.x , at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/10x/administration/guide/10xcucsagx.html .

Do the applicable procedure:


NoteYou can offer the Web Inbox, Messaging Inbox, and RSS Feeds to members of the COS only if enough licenses are available.


To Enable COS Members to Access the Cisco Unity Connection Web Inbox, Messaging Inbox, and RSS Feeds


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Licensed Features, check the Allow Users to Use the Web Inbox , Messaging Inbox, and RSS Feeds check box.

Step 3 Select Save .


 

To Enable COS Members to Access the Cisco Unity Connection Web Inbox, Messaging Inbox, and RSS Feeds for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Licensed Features, check the left-most check box of the Allow Users to Use the Messaging Inbox and RSS Feeds field to select it, and then check the Allow Users to Use the Messaging Inbox and RSS Feeds check box.

Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 4 Select Submit .


 

Deleted Message Access in Unity Connection 10.x

You specify whether users can access the messages that they delete, or whether messages are permanently deleted at the time that users delete them. If you have concerns about storing deleted messages on the server, you may want to consider preventing users from accessing deleted messages.

Do the applicable procedure:

To Enable or Disable Access to Deleted Messages


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Message Options, check or uncheck the Delete Messages Without Saving to Deleted Items Folder check box, as follows:

    • To allow users to access deleted messages, uncheck the check box.
    • If you want messages permanently deleted when users delete them, check the check box.

Step 3 Select Save .


 

To Enable or Disable Access to Deleted Messages for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Message Options, check the left-most check box of the Delete Messages Without Saving to Deleted Items Folder field to select it, and then check or uncheck the Delete Messages Without Saving to Deleted Items Folder check box, as follows:

    • To allow users to access deleted messages, uncheck the check box.
    • If you want messages permanently deleted when users delete them, check the check box.

Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 4 Select Submit .


 

Directory Listing in Unity Connection 10.x

You specify whether users in a COS can choose to be listed in the corporate directory. The corporate directory is the audio listing that users and outside callers use to reach users and to leave messages for them.

Do the applicable procedure:

To Allow COS Members to Choose Whether to Be Listed in the Corporate Directory


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Directory Listing, check the Allow Users to Choose to Be Listed in the Directory check box.

Step 3 Select Save .


 

To Allow COS Members to Choose Whether to Be Listed in the Corporate Directory for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Directory Listing, check the left-most check box of the Allow Users to Choose to Be Listed in the Directory field to select it, and then check the Allow Users to Choose to Be Listed in the Directory check box.

Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 4 Select Submit .


 

Greeting Length in Unity Connection 10.x

Do the applicable procedure to specify how long the recorded greeting of a user can be:

To Specify the Maximum Length of User Greetings


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Greetings, in the Maximum Length field, enter the maximum length for greetings, in seconds.

Step 3 Select Save .


 

To Specify the Maximum Length of User Greetings for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Greetings, check the Maximum Length field to select it, and then enter the maximum length for greetings, in seconds.

Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 4 Select Submit .


 

IMAP Client Access to Voice Messages in Unity Connection 10.x

As a convenience to users who are not always able to check messages by phone or from the Cisco Unity Connection Web Inbox or Messaging Inbox, you can enable users to use an IMAP client application on their computers to access their voice messages. Access to messages is limited according to the option you select:

 

Allow IMAP Users to Access Message Bodies

Users can access the entire voice message.

Allow IMAP Users to Access Message Bodies Except on Private Messages

Users can access the entire voice message, unless the message is marked private. For private messages, they can access only the message header. (Secure messages can never be accessed in an IMAP client.)

This option also ensures that private messages are never saved as WAV files to locations outside of the Cisco Unity Connection server.

Allow IMAP Users to Access Message Headers Only

Users can access message headers only.

Do the applicable procedure:

See the “ Configuring IMAP Settings in Cisco Unity Connection 10.x ” chapter of the System Administration Guide for Cisco Unity Connection Release 10.x for instructions on configuring the Unity Connection server, user accounts, and user workstations for IMAP client access. (The guide is available at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/10x/administration/guide/10xcucsagx.html .)

Note that you can offer IMAP client access to voice messages to members of the COS only if enough licenses are available.

For information on the single inbox functionality, see the “Single Inbox” section.

To Enable IMAP Client Access to Voice Messages for COS Members


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Licensed Features, check the Allow Users to Access Voicemail Using an IMAP Client and/or Single Inbox check box, and then select one of the following options:

    • Allow IMAP Users to Access Message Bodies
    • Allow IMAP Users to Access Message Bodies Except on Private Messages
    • Allow IMAP Users to Access Message Headers Only

Note In Cisco Unity Connection, the field name is Allow Users to Access Voicemail Using an IMAP Client; the single inbox feature is available in Connection.


Step 3 Select Save .


 

To Enable IMAP Client Access to Voice Messages for COS Members for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Licensed Features, check the left-most check box to select the Allow Users to Access Voicemail Using an IMAP Client and/or Single Inbox field, and then select one of the following options:

    • Allow IMAP Users to Access Message Bodies
    • Allow IMAP Users to Access Message Bodies Except on Private Messages
    • Allow IMAP Users to Access Message Headers Only

Note In Cisco Unity Connection, the field name is Allow Users to Access Voicemail Using an IMAP Client; the single inbox feature is available in Connection.


Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 4 Select Submit .


 

Live Reply in Unity Connection 10.x

When live reply is enabled, users who are listening to messages by phone can reply to a message by having Cisco Unity Connection call the sender. You can use COS settings to specify whether users can live reply only to messages from other users, or to messages from both users and unidentified callers (unidentified callers are outside callers or users who are forwarded to Unity Connection but who cannot be identified by the calling extension).

Users can live reply to a message by using the touchtone conversation or the voice-recognition conversation. Consider informing users when you enable this feature, because even when it is enabled, the live reply option is not mentioned in the main Unity Connection phone menus for some phone conversation types. (It is, however, mentioned in the User Guide for the Cisco Unity Connection Phone Interface .)

Note the following considerations for live reply to users:

  • Unity Connection dials the extension of the user who left the message only when the Transfer Incoming Calls to User’s Phone setting for the user who left the message is set to ring an extension or another number.

Note The Transfer Incoming Calls to User’s Phone field is on the Call Transfer page.


  • The call transfer settings for the user who left the message dictate what Unity Connection does when the user phone is busy, and whether Unity Connection screens the call.
  • If a user attempts to live reply to a message but the sender is unavailable to take the call, a reply message left for the sender is only correctly identified as having been sent by the user if the user called from his or her own extension or an alternate extension. This is because Unity Connection releases the live reply call to the phone system, and the user is no longer signed in to Unity Connection when leaving the reply message.

Note the following considerations for live reply to unidentified callers:

  • Unity Connection uses the calling number provided by the phone system in the Automatic Number Identification (ANI) string. To initiate the live reply, Unity Connection checks the ANI digits against the transfer restriction table associated with the class of service of the user. If the number is allowed, Unity Connection returns the call by performing a release transfer to the phone system.
  • You can configure a prefix that Unity Connection prepends to the ANI string, and the minimum length of the ANI string before the prefix is applied; you can use this, for example, to prepend a trunk access code to all numbers of a sufficient length, or to provide additional information that the phone system may need to process the number. Any other formatting that must be done to generate a proper dial string must be performed by the phone system. For instructions, see the “Dial Prefix Settings for Live Reply to Unidentified Callers in Cisco Unity Connection 10.x” section in the “ Changing Conversation Settings for All Users in Cisco Unity Connection 10.x ” chapter of the System Administration Guide for Cisco Unity Connection Release 10.x , at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/10x/administration/guide/10xcucsagx.html .

Do the applicable procedure:

To Enable Live Reply for COS Members


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Message Options, check either or both of the following check boxes:

    • Users Can Reply to Messages from Other Users by Calling Them
    • Users Can Reply to Messages from Unidentified Callers by Calling Them

Step 3 Select Save .


 

To Enable Live Reply for COS Members for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Message Options, check the left-most check box of either or both of the following check boxes to select them, and then check the check box:

    • Users Can Reply to Messages from Other Users by Calling Them
    • Users Can Reply to Messages from Unidentified Callers by Calling Them

Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 4 Select Submit .


 

Message Recording Length in Unity Connection 10.x

You can specify the maximum recording length for messages that users who are assigned to a COS can leave for other users. The default setting is 300 (5 minutes).


NoteThe maximum length for messages that are left by outside callers is set on the Message Settings page for each user account. See the“Outside Caller Options in Unity Connection 10.x” section for details.


Do the applicable procedure:

To Specify the Maximum Recording Length for User Messages


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Message Length, enter the maximum recording length in seconds.

Step 3 Select Save .


 

To Specify the Maximum Recording Length for User Messages for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Message Length, check the check box to the left of the Message Length field to select it, and then enter the maximum recording length in seconds.

Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 4 Select Submit .


 

Personal Call Transfer Rules in Unity Connection 10.x

By using the Personal Call Transfer Rules web tool, Cisco Unity Connection users can create call transfer rules that forward and screen direct and indirect calls according to any or all of the following criteria:

  • Identity of caller
  • Time of day
  • Meeting schedule

Unity Connection users can specify that calls are forwarded to voicemail, to another phone number, or to a series of destinations (which must include at least one phone number and which can include SMS and SMTP notification devices).

See the following sections:

Optionally, you can configure Unity Connection so that users can base personal call transfer rules on their Exchange calendar and contacts. See the “Access to Exchange Calendars and Contacts in Cisco Unity Connection 10.x” section for more information and a task list.

About the Personal Call Transfer Rules Web Tool

Personal Call Transfer Rules is a web tool available on the Cisco Personal Communications Assistant (PCA) website. In addition to allowing users to create call transfer rules, it offers the following additional features to Cisco Unity Connection users:

 

Contacts list

Unity Connection users can set up a directory of contacts that supplements the information in the Unity Connection directory. Unity Connection uses the contacts list to forward incoming calls, and also to place outgoing calls when the Unity Connection user uses the speech recognition conversation.

Note Users manage their contacts list in the Unity Connection Messaging Assistant web tool.

Caller groups

Unity Connection users can organize callers into groups so that they can apply one rule to multiple callers without having to recreate the rule multiple times. Caller groups can contain other Unity Connection users, or administrator-defined and user-defined contacts.

Personal destinations

In addition to notification devices, Unity Connection users can create a directory of contact phone numbers to which Unity Connection can direct incoming calls, according to rules that users set up.

Destination groups

Unity Connection users can create groups of personal destinations and notification devices. When transferring a call to a destination group, Unity Connection forwards the call to each destination in the group in the order listed until the phone is answered, the caller hangs up, or the last destination in the group is reached. Unity Connection users can specify the ordering of destinations in the series, and the number of rings that Unity Connection waits for the phone to be answered at each destination.

Call transfer rule tester

The call transfer rule tester is used by users and administrators to see how Unity Connection would forward an incoming call based on an actual rule.

Transfer All rule

The Transfer All rule is a single rule that forwards all calls to a specific destination for a specified time. This rule can be created and turned on only by phone.

Forward all calls to Cisco Unity Connection

Unity Connection users can forward all calls to Unity Connection in order to automatically apply personal call transfer rules to incoming calls, rather than having the call ring the primary extension.

To learn more about how users can use personal call transfer rules and the web tool, see “The Cisco Unity Personal Call Transfer Rules Web Tool” chapter of the User Guide for the Cisco Unity Connection Personal Call Transfer Rules Web Tool , available at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/10x/user/guide/pctr/b_10xcucugpctr.html .

Enabling and Disabling the Personal Call Transfer Rules Feature

Do the applicable procedure to enable or disable the personal call transfer rules feature for users in a COS:

To Enable or Disable Personal Call Transfer Rules for COS Members


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Features, do one of the following:

    • To enable personal call transfer rules, check the Allow Users to Use Personal Call Transfer Rules check box.
    • To disable personal call transfer rules, uncheck the Allow Users to Use Personal Call Transfer Rules check box.

Step 3 Select Save.


 

To Enable or Disable Personal Call Transfer Rules for COS Members for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Features, do one of the following:

    • To enable personal call transfer rules, check the left-most check box to select the Allow Users to Use Personal Call Transfer Rules field, and then check the check box.
    • To disable personal call transfer rules, check the left-most check box to select the Allow Users to Use Personal Call Transfer Rules field, and then uncheck the check box.

Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 4 Select Submit .


 

Private Distribution Lists in Unity Connection 10.x

COS settings allow you to specify the maximum number of lists that are available to users, and the maximum number of members that users can add to each list when they use the Cisco Unity Connection conversation or the Unity Connection Messaging Assistant to manage their lists.

See the following sections:

Maximum Number of Private Lists Available to Users

You can set the maximum number of lists—up to 99—available to each user who is assigned to the COS.

While both the Cisco Unity Connection conversation and the Unity Connection Messaging Assistant use this COS setting to determine when a user has reached the maximum number of lists, each application calculates differently the number of lists that a user owns:

  • When a user uses the phone to create a new list by adding members, the Cisco Unity Connection conversation counts the number of private lists that have members, and then compares the total to the value in this setting to determine whether the user has reached the list limit. Lists with no members (empty lists) are not included in the total number of lists that a user owns, even if the lists have recorded names or text names.
  • When a user uses the Messaging Assistant to create a new list, the Messaging Assistant counts the number of lists that have a recorded name, a text name, or members, and then compares the total to the value in this setting to determine whether the user has reached the list limit. Lists with no members are included in the total number as long as they have recorded names or text names.

This means that if a user belongs to a COS that allows 15 lists, and the user has 12 private lists with members and two lists with recorded names but no members, the user can potentially create more lists by phone than in the Messaging Assistant before reaching the list limit:

  • When the user uses the Cisco Unity Connection conversation, the user reaches the list limit either by adding members to the two empty lists and creating one new list, or by creating three new lists. If the user reaches the limit by creating three new lists, the user cannot add members to the two empty lists until two lists are deleted.
  • When the user uses the Messaging Assistant, the user reaches the list limit by creating one new list. Despite reaching the list limit, the user can add members to the two empty lists.

Do the applicable procedure:

To Change the Maximum Number of Private Lists Available to COS Members


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Private Distribution Lists, enter a number from 1 to 99 in the Maximum Lists Per User field.

Step 3 Select Save .


 

To Change the Maximum Number of Private Lists Available to COS Members for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Private Distribution Lists, check the check box to the left of the Maximum Lists Per User field to select it, and then enter a number from 1 to 99.

Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 4 Select Submit .


 

Maximum Number of Members Per Private List

Do the applicable procedure to specify the maximum number of members—up to 999—that users who are assigned to a COS can add to a private list:

To Change the Maximum Number of Members Per Private List


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Private Distribution Lists, enter a number from 1 to 999 in the Maximum Members Per List field.

Step 3 Select Save .


 

To Change the Maximum Number of Members Per Private List for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Private Distribution Lists, check the check box to the left of the Maximum Members Per List field to select it, and then enter a number from 1 to 999.

Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 4 Select Submit .


 

Recorded Name and Length in Unity Connection 10.x

For each COS, you specify whether users are allowed to record their own names, and how long a recorded name can be.

Hearing a name recorded in the voice of the user can help callers distinguish between users who have similar names. When allowed to record their names, users can use either the Cisco Unity Connection phone conversation or the Unity Connection Messaging Assistant to make the recording, and they are prompted to complete the task during first-time enrollment.


NoteUnity Connection does not prevent users from completing the enrollment process if they do not record a name.


When Unity Connection users have no recorded name, Unity Connection uses Text to Speech to play the username (either the display name or the concatenated first and last name, depending on which name is entered in Connection Administration). However, recorded names can give callers an extra level of assurance that they are reaching the person or mailbox they intended to reach. We highly recommend that you have user names recorded at the first time enrolment. This will assist callers in understanding names

Do the applicable procedure:

To Specify Whether COS Members Can Record Their Names, and the Length for a Name


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Recorded Name, check the Allow Recording of Voice Name check box.

Step 3 In the Maximum Length field, enter the maximum length in seconds.

Step 4 Select Save .


 

To Specify Whether COS Members Can Record Their Names, and the Length for a Name for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Recorded Name, check the left-most check box to select the Allow Recording of Voice Name field, and then check the check box.

Step 3 In the Maximum Length field, enter the maximum length in seconds.

Step 4 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 5 Select Submit .


 

Restriction Tables in Unity Connection 10.x

For each COS, you specify the restriction table that is used for call transfers and message notifications. The restriction table that you specify can be the same for both, or different for each.

To learn more about how restriction tables work, see the “ Managing Restriction Tables in Cisco Unity Connection 10.x ” chapter of the System Administration Guide for Cisco Unity Connection Release 10.x , at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/10x/administration/guide/10xcucsagx.html .

Do the applicable procedure to specify the restriction tables that control the numbers that users can use for call transfers and message notifications:

To Specify a Restriction Table for Call Transfers and Message Notifications


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Restriction Tables, do the following:

    • In the Outcalling list, select the restriction table that you want used for message notifications.
    • In the Transfer list, select the restriction table that you want used for call transfers.

Step 3 Select Save .


 

To Specify a Restriction Table for Call Transfers and Message Notifications for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Restriction Tables, do the following:

    • Check the check box to the left of the Outcalling field to select it, and then select the restriction table that you want used for message notifications.
    • Check the check box to the left of the Transfer field to select it, and then select the restriction table that you want used for call transfers.

Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 4 Select Submit .


 

Secure Messages in Unity Connection 10.x

You determine how Cisco Unity Connection handles message security for messages that are sent by members of the COS. You can specify that:

  • Messages are always marked secure.
  • Messages are marked secure only when users mark them secure by pressing the applicable key from the Special Delivery Options phone menu.
  • Messages are never marked secure.
  • Messages are marked secure only when users mark them private (this is the default).

Note that users are always able to mark a message private when they send it—regardless of the option you specify. See the “ Securing User Messages in Cisco Unity Connection 10.x ” chapter of the Security Guide for Cisco Unity Connection Release 10.x to learn more about the message security options available in Unity Connection. The guide is available at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/10x/security/guide/10xcucsecx.html .

Do the applicable procedure:

To Specify Message Security for COS Members


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Message Options, select from the following options in the Require Secure Messaging list:

    • Always —Messages are always marked secure.
    • Never —Messages are never marked secure.
    • Ask —Messages are marked secure only when users mark them secure by choosing the secure message option from the Special Delivery Options phone menu.
    • Private —Messages are marked secure only when users mark them private from the Special Delivery Options phone menu.

Step 3 Select Save .


 

To Specify Message Security for COS Members for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Message Options, check the check box to the left of the Require Secure Messaging field to select it, and then select from the following options:

    • Always —Messages are always marked secure.
    • Never —Messages are never marked secure.
    • Ask —Messages are marked secure only when users mark them secure by choosing the secure message option from the Special Delivery Options phone menu.
    • Private —Messages are marked secure only when users mark them private from the Special Delivery Options phone menu.

Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 4 Select Submit .


 

Sending Messages to System Distribution Lists in Unity Connection 10.x

Do the applicable procedure to specify whether users can send messages to system distribution lists:

To Specify Whether COS Members Can Send Messages to System Distribution Lists


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Message Options, check or uncheck the Allow Users to Send Messages to System Distribution Lists check box.

Step 3 Select Save .


 

To Specify Whether COS Members Can Send Messages to System Distribution Lists for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Message Options, check the left-most check box to select the Allow Users to Send Messages to System Distribution Lists field, and then check or uncheck the check box as applicable.

Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 4 Select Submit .


 

Single Inbox

The single inbox feature synchronizes voice messages in Cisco Unity Connection and Exchange mailboxes. Voice messages appear in the Outlook Inbox folder of the user, alongside email and faxes; the voice messages also appear in the Unity Connection mailbox of the user.

Enabling single inbox in classes of service is one step in the process of configuring single inbox. For additional information, see the “Configuring Cisco Unity Connection 10.x and Microsoft Exchange for Unified Messaging” chapter of the Unified Messaging Guide for Cisco Unity Connection Release 10.x , at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/10x/unified_messaging/guide/10xcucumgx.html .

Do the applicable procedure:

To Enable Single Inbox Access to Voice Messages for COS Members


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Licensed Features, check the Allow Users to Access Voicemail Using an IMAP Client and/or Single Inbox check box.


Note The radio buttons underneath the Allow Users to Access Voicemail Using an IMAP Client and/or Single Inbox check box are applicable only to IMAP client access.


Step 3 Select Save .


 

To Enable Single Inbox Access to Voice Messages for COS Members for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Licensed Features, check the left-most check box to select the Allow Users to Access Voicemail Using an IMAP Client and/or Single Inbox field.


Note The radio buttons underneath the Allow Users to Access Voicemail Using an IMAP Client and/or Single Inbox check box are applicable only to IMAP client access.


Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 4 Select Submit .


 

SpeechView Transcriptions of Voice Messages in Unity Connection 10.x

When the SpeechView feature is enabled, Unity Connection uses a third-party external transcription service to convert voice messages into text.

To use SpeechView, users must belong to a class of service that provides transcriptions of voice messages. Members of the class of service can view the transcriptions of their messages by using an IMAP client configured to access their Unity Connection messages. The original voice message is still attached to the transcribed text message. Users can optionally configure an SMS or SMTP notification device so that Unity Connection sends the transcription to a phone or external email address.

See the “ Configuring Transcription (SpeechView) in Cisco Unity Connection 10.x” chapter of the System Administration Guide for Cisco Unity Connection Release 10.x for instructions on configuring the Unity Connection server to communicate with the external transcription service. The guide is available at http://www.cisco.com/en/US/docs/voice_ip_comm/connection/10x/administration/guide/10xcucsagx.html .

Do the applicable procedure to enable transcriptions for members of a particular class of service:

Note that SpeechView is a licensed feature, so confirm there are enough licenses available for all members of the COS.

To Enable SpeechView Transcriptions of Voice Messages for COS Members


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Licensed Features, select the Use Standard SpeechView Transcription Service option to enable standard transcription service, and then select one of the following options:

    • Do Not Transcribe Secure Messages— Secure messages are not sent to the external transcription service.
    • Allow Transcriptions of Secure Messages— Secure messages are sent to the external transcription service. Users can view the transcription by using a client that supports viewing transcriptions of secure messages. However, users cannot configure a notification device to receive transcriptions.
    • Allow Transcriptions of Secure Messages to Be Sent to Notification Devices —Secure messages are sent to the external transcription service. Users can configure SMS and SMTP notification devices to receive transcriptions. However, users cannot view transcriptions of secure messages by using an IMAP client or ViewMail.

Note Similarly, you can select Use SpeechView Pro Transcription Service option to enable Professional transcription service.


Step 3 Select Save.


 

To Enable SpeechView Transcriptions of Voice Messages for COS Members for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Licensed Features, select the Use Standard SpeechView Transcription Service option to enable standard transcription service, and then select one of the following:

    • Do Not Transcribe Secure Messages
    • Allow Transcriptions of Secure Messages
    • Allow Transcriptions of Secure Messages to Be Sent to Notification Devices

Note Similarly, you can select the Use SpeechView Pro Transcription Service option to enable professional transcription service.


Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 4 Select Submit .

Video Greetings in Unity Connection 10.x

In Cisco Unity Connection 10.0(1) and later, for each COS, the administrator can specify whether the users are allowed to record and play video greetings. The administrator allows to play video greetings for both the identified and outside callers. He or she allows the identified callers to record video greetings too. To enable class of service settings for video greetings, navigate to Cisco Unity Connection Administration> Class of Service> Edit Class of Service> Enable Video.

Playback and Record Greetings

Enables the user to record and play video greetings.

Outside Caller

Enables the user to play video greetings to the outside callers.


NoteEnabling class of service settings for video greetings is one of the pre-checks required to establish a video call. For more information on pre-checks, seePre-checks Required for Video Greetings.


When a Unity Connection user sign-in via telephone user interface, the administrator verify the Playback Message/Greetings and Record Greetings option. If this option is:

  • Enabled: The Unity Connection user is allowed to play and record video greetings.
  • Disabled: The Unity Connection user is not allowed to play and record video greetings.

When the calling user recieves unanswered call (“ring-no-answer”) from the called user, then before allowing a Unity Connection user to play video greetings, Unity Connection verifies the class of service settings for both the calling and called users. Consider the scenarios in the table below, when the COS settings are enabled or disabled.

Table 5-1 Video Settings in Class of Service

Type of Calling User
Calling User COS setting
Called User COS Settings
Type of Greeting that Called User plays

Identified Caller

  • Playback Message/Greetings and Record Greetings : enabled
  • Outside Callers: disabled
  • Playback Message/Greetings and Record Greetings : enabled
  • Outside Callers: disabled

Unity Connection can play the video greeting to the calling user.

Identified Caller

  • Playback Message/Greetings and Record Greetings : disabled
  • Outside Callers: disabled
  • Playback Message/Greetings and Record Greetings : enabled
  • Outside Callers: disabled

Unity Connection cannot play the video greeting to the calling user.

Undentified Caller

COS settings are not applicable

  • Playback Message/Greetings and Record Greetings : enabled
  • Outside Callers: enabled

Unity Connection can play the video greeting to the calling user.

Undentified Caller

COS settings are not applicable

  • Playback Message/Greetings and Record Greetings : enabled
  • Outside Callers: disabled

Unity Connection cannot play the video greeting to the calling user.

Undentified Caller

COS settings are not applicable

  • Playback Message/Greetings and Record Greetings : disabled
  • Outside Callers: enabled

Unity Connection cannot play the video greeting to the calling user.


NoteIn case of a video call, when a remote user is connected via intersite, intrasite, or HTTPS link to an internal or remote user, the calling user is considered as an unidentified caller by the called user. If the calling user receives unanswered call (ring-no answer) by the the called user, Unity Connection plays video greeting to the called user only when the Outside Caller option is enabled in the Edit Class of Service page.


For more details on enabling video greetings feature, see the Edit Class of Service section of “Cisco Unity Connection 10.x Class of Service Settings” chapter in the Interface Reference Guide for Cisco Unity Connection Administration http://www.cisco.com/en/US/docs/voice_ip_comm/connection/10x/gui/guide/10xcucguix.html.

Do the applicable procedure to enable video greetings for the members of a particular class of service:

To Enable Greetings for COS Members


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Enable Video, select the following options depending on the desired behaviour:

    • Playback and Record Greetings— Users can play video greetings. They can also record video greetings.
    • Outside Caller —Users can play and record video greetings to the outside callers.

Step 3 Select Save.


 

To Enable Greetings for COS Members for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the class of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, select the Enable Video option to enable video messaging service, and then select the following options depending on the desired behavior:

    • Playback and Record Greetings
    • Outside Caller

Select Submit .

Voice Recognition in Unity Connection 10.x

Access to the voice-recognition conversation allows users to interact with Cisco Unity Connection by saying commands rather than by using keys on the phone. To enable users to use it, complete the following tasks in the order presented:

1. Assign users or a user template to a class of service that offers a license to access the voice-recognition feature and enables users to use it. Do the applicable procedure:

2. Specify that each user account or template is assigned to the voice-recognition conversation. See the “Touchtone and Voice-Recognition Conversations” section for instructions.

Note that you can offer voice recognition to members of the COS only if enough licenses are available.

To Allow COS Members a License to Access and Use the Voice-Recognition Feature


Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.

Step 2 On the Edit Class of Service page, under Licensed Features, check the Allow Access to Advanced Features check box, and then check the Allow Users to Use Voice Recognition check box.

Step 3 Select Save.


 

To Allow COS Members a License to Access and Use the Voice-Recognition Feature for Multiple Classes of Service in Bulk Edit Mode


Step 1 In Cisco Unity Connection Administration, on the Search Class of Service page, check the applicable COS check boxes, and select Bulk Edit .

If the classes of service that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable classes of service. Then select Bulk Edit .

Step 2 On the Edit Class of Service page, under Licensed Features, check the left-most check box to select the Allow Access to Advanced Features field, and then check the check box.

Step 3 Check the left-most check box to select the Allow Users to Use Voice Recognition field, and then check the check box.

Step 4 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.

Step 5 Select Submit .