Interface Reference Guide for Cisco Unity Connection Release 10.x
Cisco Unity Connection 10.x Contact Settings
Downloads: This chapterpdf (PDF - 163.0KB) The complete bookPDF (PDF - 3.86MB) | Feedback

Table of Contents

Cisco Unity Connection 10.x Contact Settings

Search Contacts

New Contact

Edit Contact Basics

Edit Alternate Names

SMTP Proxy Addresses

Cisco Unity Connection 10.x Contact Settings

See the following sections:

Search Contacts

 

Table 4-1 Search Contacts Page

Field
Description

Limit Search To

Select the criteria by which to limit the display of search results:

  • All—Display all search results, regardless of the Unity Connection location or partition to which they belong.
  • Partition—Display only results that belong to a particular partition. When you select this option, choose the name of the partition from the Where Name Is list.
  • Location— (Applicable to Cisco Unity Connection configurations only) Display only results that belong to a particular Unity Connection location. When you select this option, choose the name of the location from the Where Name Is list.

Alias

A unique text name for the contact.

Select the Alias to go to the specific page for the contact.

First Name

(Display only) The first name of the contact.

Last Name

(Display only) The last name of the contact.

Display Name

(Display only) The name of the contact.

Delete Selected

To delete a contact, check the check box to the left of the display name, and select Delete Selected. You can delete multiple contacts at once.

Add New

To add a contact, select Add New. A new page opens, on which you enter data applicable to the new contact.

Bulk Edit

To edit multiple contacts at one time, check the applicable contact check boxes, and select Bulk Edit.

If the contacts that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable contacts. Then select Bulk Edit.

For instructions, see the To Edit Contact Settings in Bulk Edit Mode.

See Also

The “Managing Contacts in Cisco Unity Connection 10.x” chapter of the User Moves, Adds, and Changes Guide for Cisco Unity Connection Release 10.x , available at http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/user_mac/guide/10xcucmacx/10xcucmac085.html .

New Contact

 

Table 4-2 New Contact Page

Field
Description

Alias

A unique text name for the contact.

First Name

The first name of the contact.

Last Name

The last name of the contact.

Display Name

Enter a descriptive name for the contact.

Consider the following as you enter display names for users, contacts, and distribution lists:

  • The voice-recognition conversation may have trouble recognizing display names that contain special characters and diacritical marks.
  • When a user, contact, or distribution list does not have a recorded name, Unity Connection tries to play the display name or the concatenated first and last names.

Contact Template

Select the template on which to base the new contact.

See Also

The “Managing Contacts in Cisco Unity Connection 10.x” chapter of the User Moves, Adds, and Changes Guide for Cisco Unity Connection Release 10.x , available at http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/user_mac/guide/10xcucmacx/10xcucmac085.html .

Edit Contact Basics

See Table 4-3 for information about the fields on the Edit Contact Basics page.

For instructions on editing contact information in Bulk Edit mode, see the To Edit Contact Settings in Bulk Edit Mode.

 

Table 4-3 Edit Contact Basics Page

Field
Description

Alias

(Not applicable to Bulk Edit operations) A unique text name for the contact.

First Name

(Not applicable to Bulk Edit operations) The first name of the contact.

Last Name

(Not applicable to Bulk Edit operations) The last name of the contact.

Display Name

(Not applicable to Bulk Edit operations) Enter a descriptive name for the contact.

Consider the following as you enter display names for users, contacts, and distribution lists:

  • The voice-recognition conversation may have trouble recognizing display names that contain special characters and diacritical marks.
  • When a user, contact, or distribution list does not have a recorded name, Unity Connection tries to play the display name or the concatenated first and last names.

Recorded Name

(This field appears only when editing an individual contact; not applicable to Bulk Edit operations) This is the recorded name of the user, contact, distribution list, or handler. You can record the name here, or a user can record the name by using the self-enrollment conversation, the setup options, or by using Messaging Assistant.

To record the name here, use the Media Master. Use the Open File option on the Options menu of the Media Master to use a prerecorded WAV file as the recording.

List in Directory

Check this check box to list the contact in the corporate directory, which outside callers can use to reach users and contacts.

Partition

Select the partition to which the object belongs. Partitions are grouped together into search spaces, which are used to define the scope of objects (for example, users and distribution lists) that a user or outside caller can reach while interacting with Unity Connection. Most objects can belong only to one partition; the exception is users, who can have their primary extension in one partition and alternate extensions in other partitions. A partition can belong to more than one search space.

Note that extensions must be unique within a partition, and that partitions can contain objects that do not have an associated extension (for example, some contacts and system distribution lists).

Transfer Enabled

If you want Unity Connection to transfer incoming calls to a phone number that is associated with a contact, check this check box and enter the phone number or URI in the Transfer Extension or URI field.

Note When editing contacts in Bulk Edit mode, you can check the Transfer Enabled check box, but you need to have already set transfer extensions or URIs for the contacts. Otherwise, for any contact that does not already have a transfer extension set, the Transfer Enabled field will remain disabled.

Transfer Extension or URI

(Not applicable to Bulk Edit operations) When the Transfer Enabled check box is checked, Unity Connection transfers incoming calls to the phone number or URI that is entered in this field.

Note Directory URI follows the username@host format where the host is an IPv4 address or a fully qualified domain name. The maximum length allowed in the username is 47 characters and full URI is maximum 254 characters.

When entering a phone number, include any applicable outdial access codes.

City

(Optional) Enter the city that the contact is located in.

Department

(Optional) Enter the department of the contact.

Delivery Location

(Not applicable to Bulk Edit operations) Select the VPIM location for the VPIM contact.

VPIM Remote Mailbox Number

(Not applicable to Bulk Edit operations) Enter the mailbox number for the VPIM contact on the remote voice messaging system.

Local Extension

(Not applicable to Bulk Edit operations) For VPIM contacts, you can assign a local extension that fits into the Unity Connection extension numbering scheme. A local extension allows callers to address messages to the VPIM contact by using an extension, rather than knowing the location ID and the remote mailbox number of the contact.

In addition, if you set the Transfer Enabled and Transfer Extension or URI fields, callers are able to identify and be transferred to the VPIM contact.

Phone Numbers to Call Contact by Using Voice Commands

(Not applicable to Bulk Edit operations) Use the Dialed Work Phone, Dialed Home Phone, and Dialed Mobile Phone fields when you want voice recognition users to be able to call contacts by specifying a phone type for the contact.

For dialed phone numbers, include any additional numbers necessary to dial outside calls (for example, 9), for long-distance dialing (for example, 1), and for country-to-country calling (for example, +).

Phone Numbers or URIs to Identify Contact for Personal Call Transfer Rules

(Not applicable to Bulk Edit operations) Use the Work Phone, Home Phone, Mobile Phone, Other Number 1, and Other Number 2 fields to enter phone numbers or URIs that Cisco Unity Connection uses when matching the personal call transfer rules of users against incoming phone calls from contacts.

Bulk Edit Task Scheduling

(Applicable only to Bulk Edit operations.) To immediately run a Bulk Edit operation, select Run Now.

To schedule a Bulk Edit operation for a later date and/or time, select Run Later, and set the applicable date and time in the adjacent fields.

See Also

To Edit Contact Settings in Bulk Edit Mode


Step 1 On the Search Contacts page, check the applicable contact check boxes, and select Bulk Edit .

If the contacts that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable contacts. Then select Bulk Edit .

Step 2 To make a change to a setting, check the check box to the left of the field name to select it, and then set the field as usual. See the field definitions in Table 4-3 for information on how to set each field.


Note The Status message at the top of the Edit Contact Basics page tells you how many contact accounts are being edited. Also note that the page is populated only with the fields that you are allowed to edit in bulk mode.


Step 3 When you have set all applicable fields, including the Bulk Edit Task Scheduling fields, select Submit .


 

Edit Alternate Names

 

Table 4-4 Edit Alternate Names Page

Field
Description

First Name

The alternate first name of the user or contact. Note that you must specify both a first and last alternate name.

Last Name

The alternate last name of the user or contact.

Delete Selected

To delete an alternate name, check the check box to the left of the display name, and select Delete Selected. You can delete multiple alternate names at once.

See Also

The “Alternate Names in Cisco Unity Connection 10.x” section in the “Setting Up Features and Functionality Controlled By User Account Settings in Cisco Unity Connection 10.x” chapter of the User Moves, Adds, and Changes Guide for Cisco Unity Connection Release 10.x , available at http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/user_mac/guide/10xcucmacx/10xcucmac040.html.

SMTP Proxy Addresses

 

Table 4-5 SMTP Proxy Addresses Page

Field
Description

Delete Selected

To delete an SMTP proxy address, check the check box to the left of the display name, and select Delete Selected. You can delete multiple SMTP proxy addresses at once.

Add New

To add a new SMTP proxy address, select the Add New button. A new row appears in the SMTP Proxy Address table. Enter the SMTP proxy address in the new row, then select Save.

SMTP Proxy Address

Enter an SMTP proxy address for the user or contact. Cisco Unity Connection uses proxy addresses to map the sender and recipients of an incoming SMTP message to a user or contact.

You can enter a pattern for the SMTP proxy address: a combination of text and tokens that Unity Connection replaces with a value from the user profile. (For example, Unity Connection replaces %Alias% with the alias from each user profile when editing the corresponding user.) The available tokens are:

  • %FirstName%
  • %LastName%
  • %Alias%
  • %Extension%

Append SMTP Proxy Addresses

(Applicable only to Bulk Edit operations.) Select Append SMTP Proxy Addresses to add an SMTP proxy address to each user account or contact you are editing.

Override SMTP Proxy Addresses

(Applicable only to Bulk Edit operations.) Select Override SMTP Proxy Addresses to remove any currently-existing SMTP proxy addresses for each user account or contact, and replace them with the new SMTP proxy addresses you enter in the SMTP Proxy Address field.

Bulk Edit Task Scheduling

(Applicable only to Bulk Edit operations.) To immediately run a Bulk Edit operation, select Run Now.

To schedule a Bulk Edit operation for a later date and/or time, select Run Later, and set the applicable date and time in the adjacent fields.

See Also

The “Managing Contacts in Cisco Unity Connection 10.x” chapter of the User Moves, Adds, and Changes Guide for Cisco Unity Connection Release 10.x , available at http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/user_mac/guide/10xcucmacx/10xcucmac085.html .