Cisco Emergency Responder Administration Guide 8.5
Appendix F: Command Line Interface
Downloads: This chapterpdf (PDF - 875.0KB) The complete bookPDF (PDF - 12.58MB) | Feedback

Command Line Interface

Table Of Contents

Command Line Interface

Starting a CLI Session

CLI Basics

Completing Commands

Getting Help on Commands

Ending a CLI Session

Cisco Unified OS CLI Commands

delete account

delete dns

delete ipsec

delete process

delete smtp

file check

file delete

file dump

file get

file list

file search

file tail

file view

run sql

set account

set account enable

show accountlocking

set accountlocking disable

set accountlocking enable

set accountlocking unlocktime

set cert delete

set cert import

set csr gen

set cert regen

show csr list

set commandcount

set cli pagination

set date

set ipsec

set logging

set network cluster publisher hostname

set network cluster publisher ip

set network dhcp

set network dns

set network dns options

set network domain

set network failover

set network gateway

set network ip

set network mtu

set network max_ip_contrack

set network nic

set network pmtud

set network restore

set network status

set password

set password history

set password inactivity disable

set password inactivity enable

set password inactivity period

set password expiry maximum-age enable

set password expiry maximum-age disable

set password expiry minimum-age enable

set password expiry minimum-age disable

set password expiry user maximum-age disable

set password expiry user maximum-age enable

set password expiry user minimum-age disable

set password expiry minimum-age enable

set password age minimum

set password age maximum

set password complexity character disable

set password complexity character enable

set password complexity minimum-length

set password user admin

set password user security

utils import config

set smtp

set timezone

set trace

set web-security

set workingdir

show account

show cert

show cli pagination

show ctl

show date

show diskusage

show environment

show firewall list

show hardware

show ipsec

show logins

show memory

show myself

show network

show network ipprefs

show open

show packages

show password expiry maximum-age

show password expiry minimum-age

show password expiry user maximum-age

show password expiry user minimum-age

show password history

show password inactivity

show process

show smtp

show stats io

show status

show tech all

show tech database

show tech database dump

show tech dbintegrity

show tech dbinuse

show tech dbschema

show tech dbstateinfo

show tech network

show tech prefs

show tech runtime

show tech systables

show tech system

show tech table

show tech version

show timezone

show trace

show ups status

show version

show web-security

show workingdir

unset ipsec

unset network

unset network domain

utils core list

utils core analyze

utils create report

utils csa disable

utils csa enable

utils csa status

utils dbreplication status

utils dbreplication repair

utils dbreplication reset

utils diagnose

utils disaster_recovery backup tape

utils disaster_recovery backup network

utils disaster_recovery cancel_backup

utils disaster_recovery device add local

utils disaster_recovery device add network

utils disaster_recovery device add tape

utils disaster_recovery device delete

utils disaster_recovery device list

utils disaster_recovery history

utils disaster_recovery schedule add

utils disaster_recovery schedule delete

utils disaster_recovery schedule disable

utils disaster_recovery schedule enable

utils disaster_recovery schedule list

utils disaster_recovery restore tape

utils disaster_recovery restore network

utils disaster_recovery show_backupfiles tape

utils disaster_recovery show_backupfiles network

utils disaster_recovery show_registration

utils disaster_recovery show_tapeid

utils disaster_recovery status

utils fior

utils firewall

utils iostat

utils iothrottle enable

utils iothrottle disable

utils iothrottle status

utils netdump client

utils netdump server

utils network arp

utils network capture eth0

utils network connectivity

utils network host

utils network ping

utils network tracert

utils ntp

utils ntp restart

utils ntp server add

utils ntp server delete

utils ntp server list

utils ntp start

utils remote_account

utils reset_ui_administrator_password

utils service

utils service list

utils sftp handshake

utils snmp

utils snmp walk 3

utils snmp get 3

utils system

utils system boot

utils system upgrade

utils vmtools status

utils vmtools upgrade

Commands which are not supported on VMWare


Command Line Interface


This appendix describes Cisco Unified Operating System (OS) commands that you can use on the Cisco Emergency Responder (Cisco ER) platform to perform basic operating system functions. The Cisco Unified OS Administration web interface also makes these functions available. Typically, you would use the command-line interface (CLI) only when a problem occurs while you are using the Cisco Unified OS Administration web interface.

These topics describe how to use the CLI:

Starting a CLI Session

CLI Basics

Cisco Unified OS CLI Commands

Commands which are not supported on VMWare

Starting a CLI Session

You can access the CLI remotely or locally using the following methods:

You can access the CLI remotely from a web client workstation, such as the workstation that you use for Cisco ER administration, by using SSH Secure Shell to connect securely to the Cisco ER.

You can access the CLI locally by using the monitor and keyboard that you used during installation or by using a terminal server that is connected to the serial port. Use this method if a problem exists with the IP address.

Before You Begin

Ensure you have the following information, which is defined during installation:

A primary IP address and hostname

An administrator ID

An administrator password

You will need this information to log in to the Cisco ER platform.

To start a CLI session, follow these steps:

Procedure


Step 1 Depending on your method of access, do one of the following actions:

From a remote system, use SSH Secure Shell to connect securely to the Cisco ER platform. In your SSH client, enter

ssh adminname@hostname

where adminname specifies the Administrator ID and hostname specifies the hostname that was defined during installation.

For example, ssh admin@cer-1.

From a direct connection, you receive this prompt automatically:

cer-1 login:

where cer-1 represents the host name of the system.

Enter the administrator ID that was defined during installation.

In either case, the system prompts you for a password.

Step 2 Enter the password that was defined at installation.

The CLI prompt appears. The prompt represents the Administrator ID; for example:

admin:

You can now use any CLI command.


CLI Basics

The following topics describe how to perform basic functions using the command line interface.

Completing Commands

Getting Help on Commands

Ending a CLI Session

Completing Commands

To complete commands, use Tab:

Enter the start of a command and press Tab to complete the command. For example, if you enter se and press Tab, se is expanded to the set command.

Enter a full command name and press Tab to display all the commands or subcommands that are available. For example, if you enter set and press Tab, you see all the set subcommands. An asterisk (*) identifies the commands that have subcommands.

If you reach a command, keep pressing Tab, and the current command line repeats; this indicates that no additional expansion is available.

Getting Help on Commands

You can get two kinds of help on any command:

Detailed help that includes a definition of the command and an example of its use

Short query help that includes only command syntax

To get help on commands, follow these steps:

Procedure


Step 1 To get detailed help, at the CLI prompt, enter

help command

where command specifies the command name or the command and parameter. See Example F-1.

Step 2 To query only command syntax, at the CLI prompt, enter

command?

where command represents the command name or the command and parameter. See Example F-2.


Note If you enter a question mark (?) after a menu command, such as set, it functions like the Tab key and lists the commands that are available.



Example F-1 Detailed Help Example:

admin:help file list activelog
 
   
activelog help:
This will list active logging files
 
   
options are:
page - pause output
detail - show detailed listing
reverse - reverse sort order
date - sort by date
size - sort by size
 
   
file-spec can contain '*' as wildcards
 
   
Example:
admin:file list activelog platform detail
02 Dec,2004 12:00:59 <dir> drf
02 Dec,2004 12:00:59 <dir> log
16 Nov,2004 21:45:43 8,557 enGui.log
27 Oct,2004 11:54:33 47,916 startup.log
dir count = 2, file count = 2

Example F-2 Query Example:

admin:file list activelog?
Syntax:
file list activelog file-spec [options]
file-spec mandatory file to view
options optional page|detail|reverse|[date|size]

Ending a CLI Session

To end a CLI session, enter quit at the CLI prompt. If you are logged in remotely, you are logged off and the ssh session is dropped. If you are logged in locally, you are logged off and the login prompt returns.

Cisco Unified OS CLI Commands

The following sections list and describe the CLI commands that are available for the Cisco Unified OS running on the Cisco ER platform.


Note The File I/O Reporting Service (FIOR) provides a kernel-based daemon for collecting file I/O per process. It must be enabled from the CLI; it is disabled by default.


delete account

This command allows you to delete an administrator account.

Command Syntax

delete account account-name

Parameters

account-name represents the name of an administrator account.

Requirements

Command privilege level: 4

Allowed during upgrade: No

delete dns

This command allows you to delete the IP address for a DNS server.

Command Syntax

delete dns ip-address

Parameters

ip-address represents the IP address of the DNS server you want to delete.

Usage Guidelines

The system asks whether you want to continue to execute this command.


Caution If you continue, this command causes a temporary loss of network connectivity.

Requirements

Command privilege level: 1

Allowed during upgrade: No

delete ipsec

This command allows you to delete IPSec policies and associations.

Command Syntax

delete ipsec

policy {ALL | policy-name}

association policy-name {ALL | association-name}

Parameters

policy-name represents an IPSec policy.

association-name represents an IPSec association.

Requirements

Command privilege level: 1

Allowed during upgrade: No

delete process

This command allows you to delete a particular process.

Command Syntax

delete process process-id [force | terminate | crash]

Parameters

process-id represents the process ID number.

Options

force—Tells the process to stop

terminate—Tells the operating system to terminate the process

crash—Crashes the process and produces a crash dump

Usage Guidelines


Note Use the force option only if the command alone does not delete the process and use the terminate option only if force does not delete the process.


Requirements

Command privilege level: 1

Allowed during upgrade: Yes

delete smtp

This command allows you to delete the SMTP host.

Command Syntax

delete smtp

Requirements

Command privilege level: 1

Allowed during

file check

This command checks the /usr directory tree to see whether any files or directories have been added, removed, or changed in size since the last fresh installation or upgrade and displays the results.

Command Syntax

file check [detection-size-kb]

Options

detection-size-kb specifies the minimum file size change that is required for the command to display the file as changed.

Usage Guidelines

The command notifies you about a possible impact to system performance and asks you whether you want to continue.


Caution Because running this command can affect system performance, Cisco recommends that you run the command during off-peak hours.

The display includes both deleted and new files.

Defaults

The default value of detection-size-kb is 100 KB.

Requirements

Command privilege level: 0

Allowed during upgrade: No

file delete

This command deletes one or more files.

Command Syntax

file delete

activelog directory/filename [detail] [noconfirm]

inactivelog directory/filename [detail] [noconfirm]

install directory/filename [detail] [noconfirm]

Parameters

activelog specifies a log on the active side.

inactivelog specifies a log on the inactive side.

install specifies an installation log.

directory/filename specifies the path and filename of the file(s) to delete. You can use the wildcard character (*) for filename.

Options

detail—Displays a listing of deleted files with the date and time.

noconfirm—Deletes files without asking you to confirm each deletion.

Usage Guidelines


Caution You cannot recover a deleted file except, possibly, by using the Disaster Recovery System.

You get prompted for confirmation after entering the command. You cannot delete directories or files that are in use.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

Example

The following example deletes the install log.

file delete install install.log

file dump

This command dumps the contents of a file to the screen, a page at a time.

Command Syntax

file dump

activelog directory/filename [detail] [hex]

inactivelog directory/filename [detail] [hex]

install directory/filename [detail] [hex]

Parameters

activelog specifies a log on the active side.

inactivelog specifies a log on the inactive side.

install specifies an installation log.

directory/filename specifies the path and filename of the file to dump. You can use the wildcard character (*) for filename as long as it resolves to one file.

Options

detail—Displays listing with the date and time

hex—Displays output in hexadecimal

regexp expression—Displays only the lines in the file that match the regular expression expression.

recent—Displays the most recently modified file in the directory.

Requirements

Command privilege level: 1 for logs

Allowed during upgrade: Yes

Example

This command dumps contents of file _cdrIndex.idx.

file dump activelog cm/cdr/_cdrIndex.idx

file get

This command sends the file to another system by using SFTP.

Command Syntax

file get

activelog directory/filename [reltime] [abstime] [match] [recurs]

inactivelog directory/filename [reltime] [abstime] [match] [recurs]

install directory/filename [reltime] [abstime] [match] [recurs]

partBsalog directory/filename [reltime] [abstime] [match] [recurs]

salog directory/filename [reltime] [abstime] [match] [recurs]

Parameters

activelog specifies a log on the active side.

inactivelog specifies a log on the inactive side.

install specifies an installation log.

partBsalog specifies the partBsalog log directory.

salog specifies the salog log directory.

directory/filename specifies the path to the file(s) to delete. You can use the wildcard character (*) for filename as long as it resolves to one file.

Options

abstime—Absolute time period, specified as hh:mm:MM/DD/YY hh:mm:MM/DD/YY

reltime—Relative time period, specified as months | weeks | days | hours | minutes value

match—Match a particular string in the filename, specified as string value

recurs—Get all files, including subdirectories

Usage Guidelines

After the command identifies the specified files, you get prompted to enter an SFTP host, username, and password.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

Examples

This command gets all files in the activelog operating system directory that match the string "plat":

file get activelog platform match plat
 
   

This command gets all operating system log files for a particular time period:

file get activelog platform/log abstime 18:00:9/27/2005 18:00:9/28/2005

file list

This command lists the log files in an available log directory.

Command Syntax

file list

activelog directory [page] [detail] [reverse] [date | size]

inactivelog directory [page] [detail] [reverse] [date | size]

install directory [page] [detail] [reverse] [date | size]

partBsalog directory [page] [detail] [reverse] [date | size]

salog directory [page] [detail] [reverse] [date | size]

Parameters

activelog specifies a log on the active side.

inactivelog specifies a log on the inactive side.

install specifies an installation log.

partBsalog specifies the partBsalog log directory.

salog specifies the salog log directory.

directory specifies the path to the directory to list. You can use a wildcard character (*) for directory as long as it resolves to one directory.

Options

detail—Long listing with date and time

date—Sort by date

size—Sort by file size

reverse—Reverse sort direction

page—Displays the output one screen at a time

Requirements

Command privilege level: 1 for logs

Allowed during upgrade: Yes

Examples

This example lists operating system log files with details.

file list activelog platform/log page detail
 
   

This example lists directories created for Cisco ER logs.

file list activelog er/logs
 
   

This example lists Cisco ER logs in a specified directory by size.

file list activelog er/logs size

file search

This command searches the content of a log and displays the matching lines a page at a time.

Command Syntax

file search

activelog directory/filename reg-exp [abstime hh:mm:ss mm/dd/yyyy hh:mm:ss mm/dd/yyyy] [ignorecase] [reltime {days | hours | minutes} timevalue]

inactivelog directory/filename reg-exp [abstime hh:mm:ss mm/dd/yyyy hh:mm:ss mm/dd/yyyy] [ignorecase] [reltime {days | hours | minutes} timevalue]

install directory/filename reg-exp [abstime hh:mm:ss mm/dd/yyyy hh:mm:ss mm/dd/yyyy] [ignorecase] [reltime {days | hours | minutes} timevalue]

Parameters

activelog specifies a log on the active side.

inactivelog specifies a log on the inactive side.

install specifies an installation log.

reg-exp represents a regular expression.

directory/filename represents the path to the file(s) to search. You can use the wildcard character (*) to represent all or part of the filename.

Options

abstime—Specifies which files to search based on file creation time. Enter a start time and an end time.

days|hours|minutes—Specifies whether the file age is in days, hours, or minutes.

ignorecase—Ignores case when searching

reltime—Specifies which files to search based on file creation time. Enter the age of files to search.

hh:mm:ss mm/dd/yyyyAn absolute time, in the format hours:minutes:seconds month/day/year.

timevalueThe age of files to search. The unit of this value is specified with the {days | hours | minutes} option.

Usage Guidelines

Write the search term in the form of a regular expression, which is a special text string for describing a search pattern.

If the search term is found in only one file, the filename appears at the top of the output. If the search term is found in multiple files, each line of the output begins with the filename in which the matching line was found.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

Example

file search activelog platform/log/platform.log Err[a-z] ignorecase

file tail

This command tails (prints the last few lines) of a log file.

Command Syntax

file tail

activelog directory/filename [detail] [hex] [lines]

inactivelog directory/filename [detail] [hex] [lines]

install directory/filename [detail] [hex] [lines]

Parameters

activelog specifies a log on the active side.

inactivelog specifies a log on the inactive side.

install specifies an installation log.

directory/filename specifies the path to the file to tail. You can use the wildcard character (*) for filename as long as it resolves to one file.

Options

detail—Long listing with date and time

hex—Hexadecimal listing

lines—Number of lines to display

Requirements

Command privilege level: 1 for logs

Allowed during upgrade: Yes

Example

This example tails the operating system CLI log file.

file tail activelog platform/log/cli00001.log

file view

This command displays the contents of a file.

Command Syntax

file view

activelog directory/filename

inactivelog directory/filename

install directory/filename

system-management-log

Parameters

activelog specifies a log on the active side.

inactivelog specifies a log on the inactive side.

install specifies an installation log.

system-management-log displays the contents of the Integrated Management Logs (IML).

directory/filename specifies the path to the file to view. You can use the wildcard character (*) for filename as long as it resolves to one file.

Usage Guidelines


Caution Do not use this command to view binary files because this can corrupt the terminal session.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

Examples

This example displays the install log:

file view install install.log
 
   

This example displays a particular CDR file:

file view activelog er/logs/CERAdmin01.log

run sql

This command allows you to run an SQL command.

Command Syntax

run sql sql_statement

Parameters

sql_statement represents the SQL command to run.

Requirements

Command privilege level: 1

Allowed during upgrade: No

Examples

This example runs an SQL command:

run sql select * from cerserver

set account

This command sets up a new account on the operating system.

Command Syntax

set account name

Parameters

name represents the username for the new account.

Usage Guidelines

After you enter the username, the system prompts you to enter the privilege level and password for the new account.

Requirements

Command privilege level: 0

Allowed during upgrade: No

set account enable

This command is used to enable the user account if the account is disabled due to password inactivity feature.

Password inactivity period is the number of days of inactivity after a password has expired before the account is disabled.

Upon executing this command the user account is enabled with current system settings.The system settings are Password min days, Password Max days,Password inactivity period.

Command Syntax

set account enable userid

Parameter

userid is name of the user account

Example

set account enable test

Enabling the account 'test' with current settings....

.....

Successfully enabled account 'test'

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

show accountlocking

This will show the current account locking settings

Command Syntax

show accountlocking

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

set accountlocking disable

This command will disable accountlocking for the current admin accounts.

Command Syntax

set accountlocking disable

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

set accountlocking enable

This command will enable accountlocking for the current admin accounts.

Command Syntax

set accountlocking enable

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

set accountlocking unlocktime

This command is used to configure the unlock time for CER OS admin accounts in seconds.

Acceptable values should be equal to or greater than 300 seconds but less than 3600 seconds (60 mins).

Command Syntax

set accountlocking unlocktime seconds

Parameter

seconds is unlocktime in seconds

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

set cert delete

It will delete the certificate test.pem for the unit ipsec.

Command Syntax

set cert delete [unit] [name]

Parameter

unit is name of the trust cateopry

name is certificate file name

Example:

set cert delete ipsec test.pem

Requirements

Command privilege level: 1

Allowed during upgrade: No

set cert import

It will import the certificate for the unit name of type own | trust.

Command Syntax

set cert import [unit name]

Parameter

name is unit name

Example:

set cert import trust tomcat

Successfully regenerated certificate for tomcat.

Please restart services related to tomcat for the new certificate to become active.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

set csr gen

It will regenarate the certificate for the unit name.

Command Syntax

set csr gen [name]

Parameter

name is unit name for eg tomcat.

Example

set csr gen tomcat

Successfully regenerated certificate for tomcat.

Please restart services related to tomcat for the new certificate to become active.

Requirements

Command privilege level: 1

Allowed during upgrade: No

set cert regen

It will regenarate the certificate for the unit name.

Command Syntax

set cert regen [name]

Parameter

Name is unit name

Example:

set cert regen tomcat

Successfully regenerated certificate for tomcat.

Please restart services related to tomcat for the new certificate to become active.

Requirements

Command privilege level: 1

Allowed during upgrade: No

show csr list

This will display the selected own CSR File.

Command Syntax

show csr list type

Example

show csr list own

tomcat/tomcat.csr

Vipr-QuetzalCoatl/Vipr-QuetzalCoatl.csr

set commandcount

This command changes the CLI command prompt, so it displays how many CLI commands have executed.

Command Syntax

set commandcount {enable | disable}

Parameters

unit-name represents the name of the certificate that you want to regenerate.

Requirements

Command privilege level: 1

Allowed during upgrade: No

set cli pagination

For the current CLI session, this command turns automatic pagination On or Off.

Command Syntax

set cli pagination {on | off}

Parameters

on turns pagination On.

off turns pagination Off.

Requirements

Level privilege: 1

Command privilege: 1

Allowed during upgrade: No

Example

admin:set cli pagination off
Automatic pagination is turned off

set date

This command sets the date on system.

Command Syntax

set date HH:mm:ss:MM/DD/YY

HH:mm:ss: The time format (24 hours format)

MM/DD/YY: The date format.


Note Following format is also accepted:


MM/DD/YYYY: The date format.

Example

To set date and time to 2:10:33 pm Feb 13th 2008

set date 14:10:33:02/13/08

Requirements

Command privilege level: 1

Allowed during upgrade: No

set ipsec

This command allows you to set IPSec policies and associations.

Command Syntax

set ipsec

policy {ALL | policy-name}

association policy-name {ALL | association-name}

Parameters

policy-name represents an IPSec policy.

association-name represents an IPSec association.

Requirements

Command privilege level: 1

Allowed during upgrade: No

set logging

This command allows you to enable or disable logging.

Command Syntax

set logging {enable | disable}

Requirements

Command privilege level: 0

Allowed during upgrade: No

set network cluster publisher hostname

This command configures the cluster publisher hostname.

A temporary loss of network connectivity will occur while the network is being restarted with the new configuration.

Command Syntax

set network cluster publisher hostname name

Name is hostname to be assigned

set network cluster publisher ip

This command configures the cluster publisher IP address.

A temporary loss of network connectivity will occur while the network is being restarted with the new configuration.

Command Syntax

set network cluster publisher ip addr

set network dhcp

This command enables or disables DHCP for Ethernet interface 0. You cannot configure Ethernet interface 1.

Command Syntax

set network dhcp eth0

enable

disable node_ip net_mask gateway_ip

Parameters

eth0 specifies Ethernet interface 0.

enable enables DHCP.

disable disables DHCP.

node_ip is the new static IP address for the server.

net_mask is the subnet mask for the server.

gateway_ip is the IP address of the default gateway.

Usage Guidelines

The system asks whether you want to continue to execute this command.


Caution If you continue, this command causes the system to restart. Cisco also recommends that you restart all nodes whenever any IP address gets changed.

Requirements

Command privilege level: 1

Allowed during upgrade: No

set network dns

This command sets the IP address for the primary or secondary DNS server.

Command Syntax

set network dns {primary | secondary} ip-address

Parameters

ip-address represents the IP address of the primary or secondary DNS server.

Usage Guidelines

The system asks whether you want to continue to execute this command.


Caution If you continue, this command causes a temporary loss of network connectivity. If you change the IP address of the DNS server, you must restart Cisco Tomcat. For more information, see utils service.

Requirements

Command privilege level: 1

Allowed during upgrade: No

set network dns options

This command sets DNS options.

Command Syntax

set network dns options [timeout seconds] [attempts number] [rotate]

Parameters

timeout sets the DNS request timeout.

attempts sets the number of times to attempt a DNS request before quitting.

rotate causes the system to rotate among the configured DNS servers, distributing the load.

seconds specifies the DNS timeout period, in seconds.

number specifies the number of attempts.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

set network domain

This command sets the domain name for the system.

Command Syntax

set network domain domain-name

Parameters

domain-name represents the system domain that you want to assign.

Usage Guidelines

The system asks whether you want to continue to execute this command.


Caution If you continue, this command causes a temporary loss of network connectivity.

Requirements

Command privilege level: 1

Allowed during upgrade: No

set network failover

This command enables and disables Network Fault Tolerance.

Command Syntax

failover {enable | disable}

Parameters

enable enables Network Fault Tolerance.

disable disables Network Fault Tolerance.

Requirements

Command privilege level: 1

Allowed during upgrade: No

set network gateway

This command enables you to configure the IP address of the network gateway.

Command Syntax

set network gateway ip-address

Parameters

ip-address represents the IP address of the network gateway that you want to assign.

Usage Guidelines

The system asks whether you want to continue to execute this command.


Caution If you continue, this command causes the system to restart.

Requirements

Command privilege level: 1

Allowed during upgrade: No

set network ip

This command sets the IP address for Ethernet interface 0. You cannot configure Ethernet interface 1.

Command Syntax

set network ip eth0 ip-address ip-mask

Parameters

eth0 specifies Ethernet interface 0.

ip-address represents the IP address that you want assign.

ip-mask represents the IP mask that you want to assign.

Usage Guidelines

The system asks whether you want to continue to execute this command.


Caution If you continue, this command causes the system to restart.

Requirements

Command privilege level: 1

Allowed during upgrade: No

set network mtu

This command sets the maximum MTU value.

Command Syntax

set network mtu mtu_max

Parameters

mtu_max specifies the maximum MTU value.


Note The system default MTU value equals 1500.


Usage Guidelines

The system asks whether you want to continue to execute this command.


Caution If you continue, the system will temporarily lose network connectivity.

Requirements

Level privilege: 1

Command privilege: 1

Allowed during upgrade: No

Example

admin:set network mtu 576
          ***   W A R N I N G   ***
This will cause the system to temporarily lose network connectivity
 
   
          Do you want to continue ?
 
   
Enter "yes" to continue or any other key to abort
 
   
yes
executing...

set network max_ip_contrack

This command sets the ip_conntrack_max value.

Command Syntax

set network max_ip_conntrack ip_conntrack_max

Parameters

ip_conntrack_max specifies the value for ip_conntrack_max.

set network nic

This command sets the properties of the Ethernet interface 0. You cannot configure Ethernet interface 1.

Command Syntax

set network nic eth0 [auto en | dis] [speed 10 | 100] [duplex half | full]

Parameters

eth0 specifies Ethernet interface 0.

auto specifies whether auto negotiation gets enabled or disabled.

speed specifies whether the speed of the Ethernet connection: 10 or 100 Mbps.

duplex specifies half-duplex or full-duplex.

Usage Guidelines

The system asks whether you want to continue to execute this command.


Note You can enable only one active NIC at a time.



Caution If you continue, this command causes a temporary loss of network connections while the NIC gets reset.

Requirements

Command privilege level: 1

Allowed during upgrade: No

set network pmtud

This command enables and disables Path MTU Discovery.

Command Syntax

set network pmtud [enable | disable]

Parameters

enable enables Path MTU Discovery.

disable disables Path MTU Discovery.

Usage Guidelines

The system asks whether you want to continue to execute this command.


Caution If you continue, the system will temporarily lose network connectivity.

Requirements

Level privilege: 1

Command privilege: 1

Allowed during upgrade: No

Example

admin:set network pmtud enable
          ***   W A R N I N G   ***
This will cause the system to temporarily lose network connectivity
 
   
          Do you want to continue ?
 
   
Enter "yes" to continue or any other key to abort
yes
executing...
admin:

set network restore

This command configures the specified Ethernet port to use a specified static IP address.


Caution Only use this command option if you cannot restore network connectivity using any other set network commands. This command deletes all previous network settings for the specified network interface, including Network Fault Tolerance. After running this command, you must restore your previous network configuration manually.


Caution The server temporarily loses network connectivity when you run this command.

Command Syntax

set network restore eth0 ip-address network-mask gateway

Parameters

eth0 specifies Ethernet interface 0.

ip-address specifies the IP address.

network-mask specifies the subnet mask.

gateway specifies the IP address of the default gateway.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

set network status

This command sets the status of Ethernet 0 to up or down. You cannot configure Ethernet interface 1.

Command Syntax

set network status eth0 {up | down}

Parameters

eth0 specifies Ethernet interface 0.

Usage Guidelines

The system asks whether you want to continue to execute this command.


Caution If you continue, the system will temporarily lose network connectivity.

Requirements

Command privilege level: 1

Allowed during upgrade: No

set password

This command allows you to change the administrator password.

Command Syntax

set password {admin | security}

Parameters

eth0 specifies Ethernet interface 0.

Usage Guidelines

The systems prompts you for the old and new passwords.


Note The password must contain at least six characters, and the system checks it for strength.


Servers in a cluster use the security password to authenticate communication between servers. You must reset the cluster after you change the security password.

Procedure


Step 1 Change the security password on the publisher server and then reboot the server.

Step 2 Change the security password on all the subscriber servers to the same password that you created on the publisher server and restart the subscriber server to propagate the password change.


Note Cisco recommends that you restart each server after the password is changed on that server.



Caution Failure to reboot the servers causes system service problems and problems with the Cisco ER Administration on the subscriber servers.


Requirements

Command privilege level: 1

Allowed during upgrade: No

set password history

This command sets number of passwords to maintain in history.

Command Syntax

set password history number

Parameters

number represents the number of passwords to maintain in history.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

set password inactivity disable

This command will disable the password inactivity for the OS accounts.

Command Syntax

set password inactivity disable

set password inactivity enable

This command will enable the password inactivity for the OS accounts with the default value set as 10 days.

Command Syntax

set password inactivity enable

set password inactivity period

This command wil set the password inactivity for the OS accounts with the configured value.

Acceptable values are 1-99 days.

Command Syntax

set password inactivity period days

Parameters

days represents the number of days for which we have to set inactivity.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

set password expiry maximum-age enable

This command is used to enable password expiry for OS accounts. This command sets the value of maximum password age to 3650 days (10 yrs) for CER OS admin accounts.

Command Syntax

set password expiry maximum-age enable

set password expiry maximum-age disable

This command is used to disable password expiry for OS accounts.

This means passwords for CER OS admin accounts will never expire

Command Syntax

set password expiry maximum-age disable

set password expiry minimum-age enable

This command is used to enable password expiry for OS accounts.

This command sets the value of minimum password age to 1 day (24 hrs) for OS admin accounts.

Command Syntax

set password expiry minimum-age enable

set password expiry minimum-age disable

This command is used to disable minimum password aging for OS accounts.

This means passwords for OS admin accounts can be changed at any interval.

Command Syntax

set password expiry minimum-age disable

set password expiry user maximum-age disable

This command is used to disable password expiry for a particular OS account.

Command Syntax

set password expiry user maximum-age disable userid

Parameter

userid is the name of account for which we want to disable maximum password age settings.

set password expiry user maximum-age enable

Use this command to enable password expiry for a particular OS account.

Command Syntax

set password expiry user maximum-age enable userid

Parameter

userid is the name of account for which we want to enable maximum password age settings.

set password expiry user minimum-age disable

This command is used to disable minimum password age settings for a particular OS account.

Command Syntax

set password expiry user minimum-age disable userid

Parameter

userid is the account for which we want to disable minimum password age settings.

set password expiry minimum-age enable

This command is used to enable minimum password age for a particular OS account.

Command Syntax

set password expiry user minimum-age enable userid

Parameter

userid is the account for which we want to enable minimum password age settings.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

set password age minimum

This command is used to modify the value of minimim password age for OS admin accounts in days.

Acceptable values should be equal to or greater than 0 days but less or equal to 10 days.

Command Syntax

set password age minimum days

Parameter

days is the minimum password age in days

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

set password age maximum

This command is used to modify the value of maximum password age for CER OS admin accounts in days.

Acceptable values should be equal to or greater than 10 days but less than 3650 days (10 years).

Command Syntax

set password age maximum days

Parameter

Days is maximum password age in days

Requirements

Command privilege level: 1

Allowed during upgrade: No

set password complexity character disable

This will disable password complexity. Changes will take effect only at the next password change.

When disabled the password created or changed after executing the command will no longer be strong. In other words password need not have a uppercase, lowercase, digit and special characters.

Command Syntax

set password complexity character disable

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

set password complexity character enable

Use this command to enable password complexity rules for the type of characters in a password.

When enabled, the passwords will need to following guidelines:

1. It must have at least one lower-case character,

2. It must have at least one uppercase, one digit and one special character.

3. All of the adjacent characters on the keyboard will not be accepted.

4. Any of the previous ten passwords cannot be reused.

5. The admin user password can only be changed only once in 24 hours.

A violation of any of the above rules will result in a failure.

Command Syntax

set password complexity character enable

Requirements

Command privilege level: 1

Allowed during upgrade: No

set password complexity minimum-length

This command is used to modify the value of minimum password length for CUCM OS accounts.

Acceptable values should be equal to or greater than 6. Use this command only after

enabling the character complexity of passwords.

Command Syntax

set password complexity minimum-length length

Parameter

Length is minimum password length

Requirements

Command privilege level: 1

Allowed during upgrade: No

set password user admin

This will set a new admin password

Command Syntax

set password user admin

Example:

set password user admin

Please enter the old password :********

Please enter the new password :********

re-enter new password to confirm :********

Requirements

Command privilege level: 1

Allowed during upgrade: No

set password user security

This will set a new platform security password

Command Syntax

set password user security

Example:

set password user security

Please enter the password :********

re-enter the password to confirm: ********

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils import config

This command imports all configuration settings found on the platformConfig.xml file and then reboots the system.

Command Syntax

utils import config

set smtp

This command sets the SMTP server hostname.

Command Syntax

set smtp hostname

Parameters

hostname represents the SMTP server name.

Requirements

Command privilege level: 0

Allowed during upgrade: No

set timezone

This command lets you change the system time zone.

Command Syntax

set timezone timezone

Parameters

timezone specifies the new timezone.

Usage Guidelines

Enter enough characters to uniquely identify the new time zone. Be aware that the time-zone name is case-sensitive.


Caution You must restart the system after you change the time zone.

Requirements

Command privilege level: 0

Allowed during upgrade: No

Example

This example sets the time zone to Pacific time.

set timezone Pac

set trace

This command sets trace activity for the specified task.

Command Syntax

set trace

enable Error tname

enable Special tname

enable State_Transition tname

enable Significant tname

enable Entry_exit tname

enable Arbitrary tname

enable Detailed tname

disable tname

Parameters

tname represents the task for which you want to enable or disable traces.

enable Error sets task trace settings to the error level.

enable Special sets task trace settings to the special level.

enable State_Transition sets task trace settings to the state transition level.

enable Significant sets task trace settings to the significant level.

enable Entry_exit sets task trace settings to the entry_exit level.

enable Arbitrary sets task trace settings to the arbitrary level.

enable Detailed sets task trace settings to the detailed level.

disable unsets the task trace settings.

Requirements

Command privilege level: 1

Allowed during upgrade: No

set web-security

This command sets the web security certificate information for the operating system.

Command Syntax

set web-security orgunit orgname locality state country alternate-host-name

Parameters

orgunit represents the organizational unit.

orgname represents the organizational name.

locality represents the organization location.

state represents the organization state.

country represents the organization country.

alternate-host-name (optional) specifies an alternate name for the host when you generate a web-server (Tomcat) certificate.


Note When you set an alternate-host-name parameter with the set web-security command, self-signed certificates for tomcat will contain the Subject Alternate Name extension with the alternate-host-name specified. CSR for Cisco ER will contain Subject Alternate Name Extension with the alternate host name included in the CSR.


Requirements

Command privilege level: 0

Allowed during upgrade: No

set workingdir

This command sets the working directory for active, inactive, and installation logs.

Command Syntax

set workingdir

activelog directory

inactivelog directory

install directory

Parameters

activelog sets the working directory for active logs.

inactivelog set the working directory for inactive logs.

install sets the working directory for installation logs.

directory represents the current working directory.

Requirements

Command privilege level: 0 for logs

Allowed during upgrade: Yes

show account

This command lists current administrator accounts, except the master administrator account.

Command Syntax

show account

Requirements

Command privilege level: 4

Allowed during upgrade: Yes

show cert

This command displays certificate contents and certificate trust lists.

Command Syntax

show cert

own filename

trust filename

list {own | trust}

Parameters

filename represents the name of the certificate file.

own specifies owned certificates.

trust specifies trusted certificates.

list specifies a certificate trust list.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

Example

This command displays own certificate trust lists.

show cert list own

show cli pagination

This command deploys the status of automatic CLI pagination.

Command Syntax

show cli pagination

Parameters

None

Requirements

Level privilege: 0

Command privilege: 0

Allowed during upgrade: Yes

Example

admin: show cli pagination
Automatic Pagination : Off.

show ctl

This command displays the contents of the Certificate Trust List (CTL) file on the server. It notifies you if the CTL is not valid.

Command Syntax

show ctl

show date

This command shows the system date.

Command Syntax

show date

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

show diskusage

This command displays information about disk usage on the server.

Command Syntax

show diskusage

activelog {filename filename | directory | sort}

common {filename filename | directory | sort}

inactivelog {filename filename | directory | sort}

install {filename filename | directory | sort}

tmp {filename filename | directory | sort}

Parameters

activelog displays disk usage information about the activelog directory.

common displays disk usage information about the common directory.

inactivelog displays disk usage information about the inactivelog directory.

install displays disk usage information about the install directory.

tmp displays disk usage information about the tmp directory.

Options

filename filename—Saves the output to a file specified by filename. These files are stored in the platform/cli directory. To view saved files, use the file view activelog command.

directory—Displays just the directory sizes.

sort—Sorts the output based on file size. File sizes are displayed in 1024-byte blocks.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

show environment

This command displays information about the server hardware.

Command Syntax

show environment

fans

power-supply

temperatures

Options

fans—Displays information gathered by fan probes

power-supply—Displays information gathered by power supply probes

temperatures—Displays information gathered by temperature probes

show firewall list

This command displays system aspects of the server.

Command Syntax

show firewall list [detail] [page] [file filename]

Options

detail—Displays detailed statistics on every available device on the system

page—Displays the output one page at a time

file filename—Outputs the information to a file


Note The file option saves the information to platform/cli/filename.txt. Ensure the file name does not contain the "." character.


Requirements

Command privilege level: 1

Allowed during upgrade: Yes

show hardware

This command displays the following information on the platform hardware.

Command Syntax

show hardware

Usage Guidelines

This command displays the following information on the platform hardware:

Platform

Serial number

BIOS build level

BIOS manufacturer

Active processors

RAID controller status

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

show ipsec

This command displays information on IPSec policies and associations.

Command Syntax

show ipsec

policy

association policy

information policy association

status

Parameters

policy displays all IPSec policies on the node.

association displays the association list and status for the policy.

information displays the association details and status for the policy.

status displays the status of all IPsec tunnels that are defined in the system.

policy represents the name of a specific IPSec policy.

association represents the association name.

Requirements

Command privilege level: 1

Allowed during upgrade: yes

Example

This example displays IPSec policies.

show ipsec policy

show logins

This command lists recent logins to the server.

Command Syntax

show logins number

Parameters

number specifies the number of most recent logins to display. The default is 20.

show memory

This command displays information about the server memory.

Command Syntax

show memory

count

module [ALL | module_number]

size

Options

count—Displays the number of memory modules on the system

module—Displays detailed information about each memory module

size—Displays the total amount of memory

Parameters

ALL displays information about all installed memory modules.

module_number specifies which memory module to display.

show myself

This command displays information about the current account.

Command Syntax

show myself

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

show network

This command displays network information.

Command Syntax

show network

eth0 [detail]

failover [detail] [page]

route [detail]

status [detail] [listen] [process] [all] [nodns] [search stext]

ip_conntrack

max_ip_conntrack

dhcp eth0 status

all [detail]

Parameters

eth0 specifies Ethernet 0.

failover specifies Network Fault Tolerance information.

route specifies network routing information.

status specifies active Internet connections.

ip_conntrack specifies ip_conntrack usage information.

max_ip_conntrack specifies max_ip_conntrack information.

dhcp eth0 status displays DHCP status information.

all specifies all basic network information.

Options

options—Displays additional information

detail—Displays more detailed additional information

page—Displays information 1 page at a time.

listen—Displays only listening sockets

process—Displays the process ID and name of the program to which each socket belongs

all—Displays both listening and nonlistening sockets

nodns—Displays numerical addresses without any DNS information

search stext—Searches for the stext in the output

Usage Guidelines

The eth0 parameter displays Ethernet port 0 settings, including DHCP and DNS configurations and options.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

Example

This example displays active Internet connections.

show network status

show network ipprefs

This command displays the list of ports that have been requested to be opened or translated in the firewall.

Command Syntax

ipprefs {all | enabled | public}

Parameters

all—Displays all incoming ports that may be used on the product.

enabled—Displays all incoming ports that are currently opened.

public—Displays all incoming ports that are currently opened for any remote client.

Requirements

Level privilege: 0

Command privilege: 0

Allowed during upgrade: Yes

Example

admin:show network ipprefs public 
 
   
Application  IPProtocol   PortValue    Type         XlatedPort   Status       Description  
------------ ------------ ------------ ------------ ------------ ------------ ------------ 
sshd         tcp          22           public       -            enabled      sftp and ssh 
access 
tomcat       tcp          8443         translated   443          enabled      secure web 
access 
tomcat       tcp          8080         translated   80           enabled      web access   
clm          udp          8500         public       -            enabled      cluster 
manager 
clm          tcp          8500         public       -            enabled      cluster 
manager 
ntpd         udp          123          public       -            enabled      network time 
sync 
snmpdm       udp          161          public       -            enabled      SNMP         
ccm          tcp          2000         public       -            enabled      SCCP-SIG     
ctftp        udp          6969         translated   69           enabled      TFTP access 
to CUCM TFTP Server 
ctftp        tcp          6970         public       -            enabled      HTTP access 
to CUCM TFTP Server
admin:

show open

This command displays open files and ports on the system.

Syntax Description

show open

files [all] [process processID] [regexp reg_exp]

ports [all] [regexp reg_exp]

Parameters

files displays open files on the system.

ports displays open ports on the system.

Options

all—Displays all open files or ports

process—Displays open files that belong to the specified process

processID—Specifies a process

regexp—Displays open files or ports that match the specified regular expression

reg_exp—A regular expression

show packages

This command displays the name and version for installed packages.

Command Syntax

show packages

active name [page]

inactive name [page]

Parameters

name represents the package name. To display all active or inactive packages, use the wildcard character (*).

Options

page—Displays the output one page at a time

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

show password expiry maximum-age

This command can be used to see the configured password expiration parameters.

Command Syntax

show password expiry maximum-age

show password expiry minimum-age

This command can be used to see the configured password expiration parameters.

Command Syntax

show password expiry minimum-age

show password expiry user maximum-age

This command can be used to see the configured password expiration parameters for a particular OS user.

Command Syntax

show password expiry user maximum-age userid

show password expiry user minimum-age

This command can be used to see the configured password expiration parameters for a particular OS user.

Command Syntax

show password expiry user minimum-age userid

show password history

This command displays the number of passwords that will be maintained in the history

for OS admin accounts.

Command Syntax

show password history

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

show password inactivity

This command displays the status of the password inactivity for OS accounts.

Password inactivity is the number of days of inactivity after a password has expired before the account is disabled.

Command Syntax

show password inactivity

Example

show password inactivity

Password Inactivity : Enabled and is currently set to 10 days

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

show process

This command displays information about process running on the system.

Syntax

show process

list [file filename] [detail]

load [cont] [clear] [noidle] [num number] [thread] [cpu | memory| time] [page]

name process [file filename]

open-fd process-id [, process-id2]

search regexp [file filename]

using-most cpu [number] [file filename]

using-most memory [number] [file filename]

Parameters

list displays a list of all the processes and critical information about each process, and visually indicates the child-parent relationships between the processes.

load displays the current load on the system.

name displays the details of processes that share the same name and indicates their parent-child relationship.

open-fd lists the open file descriptors for a comma-separated list of process IDs.

search searches for the pattern specified by the regular expression regexp in the output of the operating system-specific process listing.

using-most cpu displays a list of the most CPU-intensive processes.

using-most memory displays a list of the most memory-intensive processes.

Options

file filename—Outputs the results to the file specified by filename

detail—Displays detailed output

cont—Repeats the command continuously

clear—Clears the screen before displaying output

noidle—Ignore the idle/zombie processes

num number—Displays the number of processes specified by number. The default number of processes is 10. Set number to all to display all processes.

thread—Displays threads

[cpu | memory | time]—Sorts output by CPU usage, memory usage, or time usage. The default is to sort by CPU usage.

page—Displays the output in pages

process—Specifies the name of a process

process-id—Specifies the process ID number of a process

regexp—A regular expression

number—The number of processes to display. The default is 5.

show smtp

This command displays the name of the SMTP host.

Command Syntax

show snmp

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

show stats io

This command displays system IO statistics.

Command Syntax

show stats io [kilo] [detail] [page] [file filename]

Options

kilo—Displays statistics in kilobytes

detail—Displays detailed statistics on every available device on the system and overrides the kilo option

page—Displays one page at a time

file filename—Outputs the information to a file


Note The file option saves the information to platform/cli/filename.txt. The file name cannot contain the "." character.


Requirements

Command privilege level: 1

Allowed during upgrade: Yes

show status

This command displays basic platform status.

Command Syntax

show status

Usage Guidelines

This command displays the following basic platform status:

Host name

Date

Time zone

Locale

Product version

Platform version

CPU usage

Memory and disk usage

Requirements

Command privilege level: 0

show tech all

This command displays the combined output of all show tech commands.

Command Syntax

all [page] [file filename]

Options

page—Displays one page at a time

file filename—Outputs the information to a file


Note The file option saves the information to platform/cli/filename.txt. The file name cannot contain the "." character.


Requirements

Command privilege level: 1

Allowed during upgrade: Yes

show tech database

This command creates a CSV file of the entire database.

Command Syntax

show tech database

dump

sessions

Parameters

dump creates a CSV file of the entire database.

sessions redirects the session and SQL information of the present session IDs to a file.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

show tech database dump

This command creates a CSV file of the entire database.

Command Syntax

show tech database dump

show tech dbintegrity

This command displays the database integrity.

Command Syntax

show tech dbintegrity

show tech dbinuse

This command displays the database in use.

Command Syntax

show tech dbinuse

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

show tech dbschema

This command displays the database schema in a CSV file.

Command Syntax

show tech dbschema

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

show tech dbstateinfo

This command displays the state of the database.

Command Syntax

show tech dbstateinfo

show tech network

This command displays network aspects of the server.

Command Syntax

show tech network [page] [file filename]

show tech network

all [page] [search text] [file filename]

hosts [page] [search text] [file filename]

interfaces [page] [search text] [file filename]

resolv [page] [search text] [file filename]

routes [page] [search text] [file filename]

sockets {numeric}

Parameters

all displays all network tech information.

hosts displays information about hosts configuration.

interfaces displays information about the network interfaces.

resolv displays information about hostname resolution.

routes displays information about network routes.

sockets displays the list of open sockets.

Options

page—Displays one page at a time

search text—Searches the output for the string specified by text. The search is case insensitive.

file filename—Outputs the information to a file

numeric—Displays the numerical addresses of the ports instead of determining symbolic hosts. It is equivalent to running the Linux shell command netstat [-n] command.

Usage Guidelines

The file option saves the information to platform/cli/filename.txt. The file name cannot contain the "." character.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

show tech prefs

This command displays all preferences files for Cisco ER and its database. This information is written to a file, which can be viewed subsequently using the file view CLI.

Command Syntax

show tech prefs

show tech runtime

This command displays runtime aspects of the server.

Command Syntax

show tech runtime

all [page] [file filename]

cpu [page] [file filename]

disk [page] [file filename]

env [page] [file filename]

memory [page] [file filename]

Parameters

all displays all runtime information.

cpu displays CPU usage information at the time the command is run.

disk displays system disk usage information.

env displays environment variables.

memory displays memory usage information.

Options

page—Displays one page at a time

file filename—Outputs the information to a file

Usage Guidelines

The file option saves the information to platform/cli/filename.txt. The file name cannot contain the "." character.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

show tech systables

This command displays the name of all tables in the sysmaster database.

Command Syntax

show tech systables

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

show tech system

This command displays system aspects of the server.

Command Syntax

show tech system

all [page] [file filename]

bus [page] [file filename]

hardware [page] [file filename]

host [page] [file filename]

kernel [page] [file filename]

software [page] [file filename]

tools [page] [file filename]

Parameters

all displays all of the system information.

bus displays information about the data buses on the server.

hardware displays information about the server hardware.

host displays information about the server.

kernel lists the installed kernel modules.

software displays information about the installed software versions.

tools displays information about the software tools on the server.

Options

page—Displays one page at a time

file filename—Outputs the information to a file

Usage Guidelines

The file option saves the information to platform/cli/filename.txt. The file name cannot contain the "." character.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

show tech table

This command displays the contents of the specified database table.

Command Syntax

show tech table table_name [page] [csv]

Parameters

table_name represents the name of the table to display.

Options

page—Displays the output one page at a time

csv—Sends the output to a comma separated values file

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

show tech version

This command displays the version of the installed components.

Command Syntax

show tech version [page]

Options

page—Displays the output one page at a time

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

show timezone

This command displays time zone information.

Command Syntax

show timezone

config

list [page]

Parameters

config displays the current time zone settings.

list displays the available time zones.

Options

page—Displays the output one page at a time

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

show trace

This command displays trace information for a particular task.

Command Syntax

show trace [task_name]

Parameters

task_name represents the name of the task for which you want to display the trace information.


Note If you do not enter any parameters, the command returns a list of available tasks.


Requirements

Command privilege level: 0

Allowed during upgrade: Yes

Example

This example displays trace information for CDP.

show trace cdps

show ups status

This command shows the current status of the USB-connected APC smart-UPS device and starts the monitoring service if not already started.

This command to give full status is only available on 7835-H2 and 7825-H2 servers.

Command Syntax

show ups status

show version

This command displays the software version on the active or inactive partition.

Command Syntax

show version

active

inactive

Parameters

active displays the version running on the active partition.

inactive displays the version on the inactive partition.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

show web-security

This command displays the contents of the current web-security certificate.

Command Syntax

show web-security

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

show workingdir

This command retrieves the current working directory for activelog, inactivelog, and install.

Command Syntax

show workingdir

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

unset ipsec

This command allows you to disable IPSec policies and associations.

Command Syntax

unset ipsec

policy {ALL | policy-name}

association policy-name {ALL | association-name}

Parameters

policy-name represents the name of an IPSec policy.

association-name represents the name of an IPSec association.

Requirements

Command privilege level: 1

Allowed during upgrade: No

unset network

This command unsets DNS options.

Command Syntax

unset network dns options [timeout] [attempts] [rotate]

Parameters

timeout sets the wait time before the system considers a DNS query failed to the default.

attempts sets the number of DNS attempts to make before failing to the default.

rotate sets the method for selecting a nameserver to the default. This affects how loads are distributed across nameservers.

Usage Guidelines

The system asks whether you want to continue to execute this command.


Caution If you continue, the system will temporarily lose network connectivity.

unset network domain

This command unsets the domain name, the command restarts the server.

Command Syntax

unset network domain

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

utils core list

This command lists all existing core files.

Command Syntax

utils core list

utils core analyze

This command generates a backtrace for the specified core file, a thread list, and the current value of all CPU registers.

Command Syntax

utils core analyze core file name

Parameters

core file name specifies the name of a core file.

Usage Guidelines

The command creates a file of the same name as the core file, with a .txt extension, in the same directory as the core file. This command works only on the active partition.

utils create report

This command creates reports about the server in the platform/log directory.

Command Syntax

utils create report

hardware

platform

csa

Parameters

hardware creates a system report containing disk array, remote console, diagnostic, and environmental data.

platform collects the platform configuration files into a TAR file.

csa collects all the files required for CSA diagnostics and assembles them into a single CSA diagnostics file. You can retrieve this file by using the file get command.

Usage Guidelines

You are prompted to continue after you enter the command.

After creating a report, use the command file get activelog platform/log/filename, where filename is the report filename that is displayed after the command completes, to get the report.

Requirements

Level privilege: 1

Command privilege level: 0

Allowed during upgrade: Yes

utils csa disable

This command stops Cisco Security Agent (CSA).

Command Syntax

utils csa disable

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils csa enable

This command enables Cisco Security Agent (CSA).

Command Syntax

utils csa enable

Usage Guidelines

The system prompts you to confirm that you want to enable CSA.


Caution You must restart the system after you start CSA.

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils csa status

This command displays the current status of Cisco Security Agent (CSA).

Command Syntax

utils csa status

Usage Guidelines

The system indicates whether CSA is running.

Requirements

Command privilege level: 0

Allowed during upgrade: No

utils dbreplication status

This command displays the status of database replication. You should run this command only on the first Publisher server of a cluster.

Command Syntax

utils dbreplication status

utils dbreplication repair

This command repairs database replication.

Command Syntax

utils dbreplication repair

utils dbreplication reset

This command resets and restarts database replication.

Command Syntax

utils dbreplication reset


Note You must restart the Cisco ER Subscriber node from CUOS Administration or using the CLI command utils system restart after executing utils dbreplication reset command. Please see help utils dbreplication reset CLI command for more details.


utils diagnose

This command enables you to diagnose and attempt to automatically fix system problems.

Command Syntax

utils diagnose

fix

list

module module_name

test

version

Parameters

fix runs all diagnostic commands and attempts to fix problems.

list lists all available diagnostic commands.

module runs a single diagnostic command or group of commands and attempts to fix problems.

test runs all diagnostic commands but does not attempt to fix problems.

version displays the diagnostic framework version.

module_name is the name of a diagnostics module.

utils disaster_recovery backup tape

This command starts a backup job and stores the resulting tar file on tape.

Command Syntax

utils disaster_recovery backup tape featurelist tapeid

Parameters

featurelist specifies the list of features to back up, separated by commas.

tapeid represents the ID of an available tape device.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

utils disaster_recovery backup network

This command starts a backup job and stores the resulting tar file on a remote server.

Command Syntax

utils disaster_recovery backup network featurelist path servername username

Parameters

featurelist specifies the list of features to back up, separated by commas.

path represents the location of the backup files on the remote server.

servername represents the IP address or host name of the server where you stored the backup files.

username represents the username that is needed to log in to the remote server.

Usage Guidelines


Note The system prompts you to enter the password for the account on the remote server.


Requirements

Command privilege level: 1

Allowed during upgrade: Yes

utils disaster_recovery cancel_backup

This command cancels the ongoing backup job.

Command Syntax

utils disaster_recovery cancel_backup

Usage Guidelines

The system prompts you to confirm that you want to cancel the backup job.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

utils disaster_recovery device add local

This will add the backup local device.

Command Syntax

utils disaster_recovery device add local device_name Number_of_backups

Parameter

device_name is name of back up device

Number_of_backups is the number of back ups we want.

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils disaster_recovery device add network

This will add the backup network device.

Command Syntax

utils disaster_recovery device add network device_name path server_name/ip_address username Number_of_backups

Parameters

device_name is name of the backup device to be added

path is path to retrieve backup device from this location

server_name/ip_address is hostname or ip address of the server where the backup file needs to be stored.

username is user id to connect to remote machine

Optional Parameter

Number_of_backups Number of backups to store on Network Directory(default 2)

Example:

utils disaster_recovery device add network networkDevice /root 10.77.31.116 root 3

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils disaster_recovery device add tape

This will add the backup tape device.

Command Syntax

utils disaster_recovery device add tape device_name tapeid

Parameter

device_name is name of the backup device to be added

tapeid is tapeid

Example:

utils disaster_recovery device add tape tapeDevice /dev/nst0

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils disaster_recovery device delete

This will delete the device.

Command Syntax

utils disaster_recovery device delete device_name|*

Parameter

device_name is name of the device to be deleted

* means deletes all the existing devices except for the ones associated to a schedule.

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils disaster_recovery device list

This will show device name device type and device path for all the backup device.

Command Syntax

utils disaster_recovery device list

Example:

utils disaster_recovery device list

sftpdevice NETWORK 10.77.31.116 : /root

tapedevice TAPE /dev/nst0

localdevice LOCAL /common/drfbackup

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

utils disaster_recovery history

This will show the history of previous Backup\Restore

Command Syntax

utils disaster_recovery history operation

Parameter

Operation is name of operation like Backup\Restore

Example:

utils disaster_recovery history backup

Tar Filename: Backup Device: Completed On: Result: Backup Type: Features Backed Up:

2009-10-30-14-53-32.tar TAPE Fri Oct 30 14:55:31 CDT 2009 ERROR MANUAL

2009-12-10-10-30-17.tar TAPE Thu Dec 10 10:35:22 CST 2009 SUCCESS MANUAL CDR_CAR,CCM

utils disaster_recovery schedule add

This will add the configured schedules

Command Syntax

utils disaster_recovery schedule add schedulename devicename featurelist datetime frequency

Parameter

schedulename is name of the scheduler.

devicename is name of the device for which scheduling is done.

featurelist is Comma separated feature list to backup.

datetime is date when the scheduler is set. format - (yyyy/mm/dd-hh:mm) 24 hr clock

frequency is frequency at which the scheduler is set to take a backup.eg: ONCE, DAILY, WEEKLY and MONTHLY

Example:

utils disaster_recovery schedule add schedulename devicename featurelist datetime frequency

Schedule has been saved successfully.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

utils disaster_recovery schedule delete

The specified schedule will be deleted

Command Syntax

utils disaster_recovery schedule delete schedulename|*

Parameter

schedulename is the name of the schedule that needs to be deleted

* deletes all the existing schedules

Example:

utils disaster_recovery schedule delete schedule1|*

Schedule(s) deleted successfully.

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils disaster_recovery schedule disable

The specified schedule will be disabled

Command Syntax

utils disaster_recovery schedule disable schedulename

Parameter

schedulename is the name of the schedule that needs to be disabled

Example:

utils disaster_recovery schedule disable schedule1

Schedule disabled successfully.

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils disaster_recovery schedule enable

The specified schedule will be enabled

Command Syntax

utils disaster_recovery schedule enable schedulename

Parameter

schedulename is the name of the schedule that needs to be enabled

Example:

utils disaster_recovery schedule enable schedule1

Schedule enabled successfully.

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils disaster_recovery schedule list

This will show all the schedules configured

Command Syntax

utils disaster_recovery schedule list

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils disaster_recovery restore tape

This command starts a restore job and takes the backup tar file from tape.

Command Syntax

utils disaster_recovery restore tape server tarfilename tapeid

Parameters

server specifies the hostname of the server that you want to restore.

tarfilename specifies the name of the file to restore.

tapeid specifies the name of the tape device from which to perform the restore job.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

utils disaster_recovery restore network

This command starts a restore job and takes the backup tar file from a remote server.

Command Syntax

utils disaster_recovery restore network restore_server tarfilename path servername username

Parameters

restore_server specifies the hostname of the server that you want to restore.

tarfilename specifies the name of the file to restore.

path represents the location of the backup files on the remote server.

servername represents the IP address or host name of the server where you stored the backup files.

username represents the username that is needed to log in to the remote server.

Usage Guidelines


Note The system prompts you to enter the password for the account on the remote server.


Requirements

Command privilege level: 1

Allowed during upgrade: Yes

utils disaster_recovery show_backupfiles tape

This command displays information about the backup files that are stored on a tape.

Command Syntax

utils disaster_recovery show_backupfiles tape tapeid

Parameters

tapeid represents the ID of an available tape device.

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils disaster_recovery show_backupfiles network

This command displays information about the backup files that are stored on a remote server.

Command Syntax

utils disaster_recovery show_backupfiles network path servername username

Parameters

path represents the location of the backup files on the remote server.

servername represents the IP address or host name of the server where you stored the backup files.

username represents the username that is needed to log in to the remote server.

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils disaster_recovery show_registration

This command displays the registered features and components on the specified server.

Command Syntax

utils disaster_recovery show_registration hostname

Parameters

hostname specifies the server for which you want to display registration information.

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils disaster_recovery show_tapeid

This command displays a list of tape device IDs.

Command Syntax

utils disaster_recovery show_tapeid

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils disaster_recovery status

This command displays the status of the current backup or restore job.

Command Syntax

utils disaster_recovery status operation

Parameters

operation specifies the name of the ongoing operation: backup or restore.

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils fior

This command allows you to monitor the I/O on the server. The File I/O Reporting service provides a kernel based daemon for collecting file I/O per process.

Command Syntax

utils fior

disable

enable

list [start=date-time] [stop=date-time]

start

status

stop

top number [read | write | read-rate | write-rate] [start=date-time] [stop=date-time]

Options

disable—Prevents the file I/O reporting service from starting automatically when the machine boots. This command does not stop the service without a reboot. Use the stop option to stop the service immediately.

enable—Enables the file I/O reporting service to start automatically when the machine boots. This command does not start the service without a reboot. Use the start option to start the service immediately.

list—This command displays a list of file I/O events, in chronological order, from oldest to newest.

start—Starts a previously stopped file I/O reporting service. The service remains in a started state until it is manually stopped or the machine is rebooted.

status—Displays the status of the file I/O reporting service.

stop—Stops the file I/O reporting service. The service remains in a stopped state until it is manually started or the machine is rebooted.

top—Displays a list of top processes that create file I/O. This list can be sorted by the total number of bytes read, the total number of bytes written, the rate of bytes read, or the rate of bytes written.

start—Specifies a starting date and time.

stop—Specifies a stopping date and time.

date-time—specifies a date and time, in any of the following formats: H:M, H:M:S a, H:M, a, H:M:S Y-m-d, H:M, Y-m-d, H:M:S.

number—Specifies how many of the top processes to list.

[read | write | read-rate | write-rate]—Specifies the metric used to sort the list of top process.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

utils firewall

This command manages the firewall on the node.

Command Syntax

utils firewall

disable {time}

enable

list

status

Parameters

disable disables the firewall.

time specifies the duration for which the firewall is disabled, in one of these formats:

[0-1440]m to specify a duration in minutes.

[0-24]h to specify a duration in hours.

[0-23]h[0-60]m to specify a duration in hours and minutes.

If you do not specify a time, the default is 5 minutes.

list displays the current firewall configuration.

status displays the status of the firewall.

Usage Guidelines

When the firewall is disabled, you must enter the URL of the Cisco Unified Communications Manager server in the following format to log into the web interface:

https://server:8443/
 
   

where server is the servername or IP address of the server.

Disabling the firewall is not recommended.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

utils iostat

This command displays the iostat output for the given number of iterations and interval.

Command Syntax

utils iostat [interval] [iterations] [filename]

Parameters

interval represents the value in seconds between two iostat readings (mandatory if you specify the number of iterations)

interations represents the number of iostat iterations to be performed (mandatory if you specify an interval)

filename redirects the output to a file

Requirements

Level privilege: 0

Command privilege: 1

Allowed during upgrade: No

utils iothrottle enable

This command enables I/O throttling enhancements. When enabled, I/O throttling enhancements lower the impact of upgrades on an active system.

Command Syntax

utils iothrottle enable

utils iothrottle disable

This command disables I/O throttling enhancements. This could adversely affect the system during upgrades.

Command Syntax

utils iothrottle disable

utils iothrottle status

This command displays the status of I/O throttling enhancements.

Command Syntax

utils iothrottle status

utils netdump client

This command configures the netdump client.

Command Syntax

utils netdump client

start ip-address-of-netdump-server

status

stop

Parameters

start starts the netdump client.

status displays the status of the netdump client.

stop stops the netdump client.

ip-address-of-netdump-server specifies the IP address of the netdump server to which the client will send diagnostic information.

Usage Guidelines

In the event of a kernel panic crash, the netdump client sends diagnostic information about the crash to a netdump server.

Requirements

Command privilege level: 0

Allowed during upgrade: No

utils netdump server

This command configures the netdump server.

Command Syntax

utils netdump server

add-client ip-address-of-netdump-client

delete-client ip-address-of-netdump-client

list-clients

start

status

stop

Parameters

add-client adds a netdump client.

delete-client deletes a netdump client.

list-clients lists the clients that are registered with this netdump server.

start starts the netdump server.

status displays the status of the netdump server.

stop stops the netdump server.

ip-address-of-netdump-client specifies the IP address of a netdump client.

Usage Guidelines

In the event of a kernel panic crash, a netdump-enabled client system sends diagnostic information about the crash to the netdump server.

netdump diagnostic information gets stored in the following location on the netdump server: crash/. The subdirectories whose names comprise a client IP address and a date contain netdump information.

You can configure each Cisco ER server as both a netdump client and server.

If the server is on another Cisco ER server, only the kernel panic trace signature gets sent to the server; otherwise, an entire core dump gets sent.

Requirements

Command privilege level: 0

Allowed during upgrade: No

utils network arp

This command lists, sets, or deletes Address Resolution Protocol (ARP) table entries.

Command Syntax

utils network arp

list [host host] [page] [numeric]

set {host} {address}

delete host

Parameters

list lists the contents of the address resolution protocol table.

set sets an entry in the address resolution protocol table.

delete deletes an entry in the address resolution table.

host represents the host name or IP address of the host to add or delete to the table.

address represents the MAC address of the host to be added. Enter the MAC address in the following format: XX:XX:XX:XX:XX:XX.

Options

page—Displays the output one page at a time

numeric—Displays hosts as dotted IP addresses

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

utils network capture eth0

This command captures IP packets on the specified Ethernet interface.

Command Syntax

utils network capture eth0 [page] [numeric] [file fname] [count num] [size bytes] [src addr] [dest addr] [port num]

Parameters

eth0 specifies Ethernet interface 0.

Options

page—Displays the output one page at a time

When you use the page or file options, the complete capture of all requested packets must occur before the command completes.

numeric—Displays hosts as dotted IP addresses

file fname—Outputs the information to a file

The file option saves the information to platform/cli/fname.cap. The filename cannot contain the "." character.

count num—Sets a count of the number of packets to capture

For screen output, the maximum count equals 1000, and, for file output, the maximum count equals 10,000.

size bytes—Sets the number of bytes of the packet to capture

For screen output, the maximum number of bytes equals 128, for file output, the maximum of bytes can be any number or ALL.

src addr—Specifies the source address of the packet as a host name or IPV4 address

dest addr—Specifies the destination address of the packet as a host name or IPV4 address

port num—Specifies the port number of the packet, either source or destination

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

utils network connectivity

This command verifies the server's network connection to the publisher server. It is only valid on a subscriber server.

Command Syntax

utils network connectivity

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

utils network host

This command resolves a host name to an address or an address to a host name.

Command Syntax

utils network host hostname [server server-name] [page] [detail] [srv]

Parameters

hostname represents the host name or IP address that you want to resolve.

Options

server-name—Specifies an alternate domain name server

page—Displays the output one screen at a time

detail—Displays a detailed listing

srv—Displays DNS SRV records.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

utils network ping

This command allows you to ping another server.

Command Syntax

utils network ping destination [count]

Parameters

destination represents the hostname or IP address of the server that you want to ping.

Options

count—Specifies the number of times to ping the external server. The default count equals 4.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

utils network tracert

This command traces IP packets that are sent to a remote destination.

Command Syntax

utils network tracert destination

Parameters

destination represents the hostname or IP address of the server to which you want to send a trace.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

utils ntp

This command displays the NTP status or configuration.

Command Syntax

utils ntp {status | config}

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

utils ntp restart

This command restarts the NTP service.

Command Syntax

utils ntp restart

Parameters

None

Requirements

Level privilege: 0

Command privilege: 0

Allowed during upgrade: Yes

utils ntp server add

The command will add upto 5 specified ntp server(s).

norestart will result in the ntp service not being restarted after adding the server(s).


Note If the norestart option is used, an explicit restart of the NTP service is required for the changes to take effect.


Command Syntax

utils ntp server add s1 [s2 s3 s4 s5] [norestart]

Parameter

mandatory parameter: at least one ntp server to add

optional parameters: upto four more ntp servers and the norestart option.

Example1: Adding servers with incorrect command line parameters

--------------------------------------------------------------

admin:utils ntp server add s1 s2 s3 s4 s5 s6 s7 s8

Incorrect number of parameters entered for add

usage: utils ntp server add s1 [s2 s3 s4 s5] [norestart]

admin:

Example2: Adding using norestart without specifying a server

-----------------------------------------------------------

admin:utils ntp server add norestart

At least one NTP server must be specified for add operation.

usage: utils ntp server add s1 [s2 s3 s4 s5] [norestart]

Example3: Adding servers without norestart

-----------------------------------------

admin:utils ntp server add clock1.cisco.com clock2.cisco.com

clock1.cisco.com : added successfully.

clock2.cisco.com : added successfully.

Restarting NTP on the server.

Example4: Adding servers that are already added, without norestart

-----------------------------------------------------------------

admin:utils ntp server add clock1.cisco.com clock2.cisco.com

clock1.cisco.com : [The host has already been added as an NTP server.]

clock2.cisco.com : [The host has already been added as an NTP server.]

admin:

Example5: Adding server to self without norestart

------------------------------------------------

admin:utils ntp server add bglr-ccm26

bglr-ccm26 : [This server cannot be added as an NTP server.]

admin:

Example6: Adding inaccessible server without norestart

-----------------------------------------------------

admin:utils ntp server add clock3.cisco.com

clock3.cisco.com : [ Inaccessible NTP server. Not added. ]

admin:

Example7: Adding servers with norestart

--------------------------------------

admin:utils ntp server add ntp01-syd.cisco.com ntp02-syd.cisco.com clock.cisco.com norestart

ntp01-syd.cisco.com : added successfully.

ntp02-syd.cisco.com : added successfully.

clock.cisco.com : added successfully.

The NTP service will need to be restarted for the changes to take effect.

Example8: Adding servers when 5 are already configured

-----------------------------------------------------

admin:utils ntp server add clock3.cisco.com

The maximum permissible limit of 5 NTP servers is already configur

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

utils ntp server delete

The command will present the user with the option to delete any configured ntp server or all of them.

After the user enters their choice, they are prompted if they would like to restart the NTP service.

Answering No will result in the ntp service not being restarted after deleting the server(s).


Note If the user chooses not to restart the NTP service, an explicit restart of the NTP service is required for the changes to take effect.


Command Syntax

utils ntp server delete

Example1: Deleting servers with incorrect command line parameters

----------------------------------------------------------------

admin:utils ntp server delete clock1.cisco.com clock2.cisco.com

Incorrect number of optional parameters entered for delete

usage: utils ntp server delete

admin:

Example2: Deleting single server with ntp restart

------------------------------------------------

admin:utils ntp server delete

1: clock1.cisco.com

2: clock2.cisco.com

3: ntp01-syd.cisco.com

4: ntp02-syd.cisco.com

5: clock.cisco.com

a: all

q: quit

Choice: 1

Restart NTP (y/n): y

clock1.cisco.com will be deleted from the list of configured NTP servers.

Continue (y/n)?y

clock1.cisco.com : deleted successfully.

Restarting NTP on the server.

admin:

Example3: Deleting all servers without ntp restart

-------------------------------------------------

admin:utils ntp server delete

1: clock1.cisco.com

2: clock2.cisco.com

3: ntp01-syd.cisco.com

4: ntp02-syd.cisco.com

5: clock.cisco.com

a: all

q: quit

Choice: a

Restart NTP (y/n): n

This will result in all the configured NTP servers being deleted.

Continue (y/n)?y

clock1.cisco.com : deleted successfully.

clock2.cisco.com : deleted successfully.

ntp01-syd.cisco.com : deleted successfully.

ntp02-syd.cisco.com : deleted successfully.

clock.cisco.com : deleted successfully.

The NTP service will need to be restarted for the changes to take effect.

admin:

Example4: Deleting all servers when no servers are configured

------------------------------------------------------------

admin:utils ntp server delete

There are no NTP servers configured to delete.

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

utils ntp server list

The command will list the configured ntp server(s).

Command Syntax

utils ntp server list

Example1: Listing servers with incorrect command line parameters

---------------------------------------------------------------

admin:utils ntp server list all

Incorrect optional parameter entered for list

usage: utils ntp server list

admin:

Example2: Listing servers

------------------------

admin:utils ntp server list

clock1.cisco.com

clock2.cisco.com

ntp01-syd.cisco.com

ntp02-syd.cisco.com

clock.cisco.com

admin:

Example3: Listing servers when no servers are configured

-------------------------------------------------------

admin:utils ntp server list

There are no NTP servers configured.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

utils ntp start

If it is not already running, this command starts the NTP service.


Note You cannot stop the NTP service from the command line interface. Use this command when the utils ntp status command returns stopped.


Command Syntax

utils ntp start

Parameters

None

Requirements

Level privilege: 0

Command privilege: 0

Allowed during upgrade: Yes

utils remote_account

This command allows you to enable, disable, create, and check the status of a remote account.

Command Syntax

utils remote_account

status

enable

disable

create username life

Parameters

username specifies the name of the remote account. The username can contain only lowercase characters and must be more than six-characters long.

life specifies the life of the account in days. After the specified number of day, the account expires.

Usage Guidelines

A remote account generates a pass phrase that allows Cisco Systems support personnel to get access to the system for the specified life of the account. You can have only one remote account that is enabled at a time.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

Example

utils remote_account status

utils reset_ui_administrator_password

This command resets the Cisco ER Administration password.

Command Syntax

utils reset_ui_administrator_password

utils service

This command stops, starts, or restarts a service.

Command Syntax

utils service

start service-name

stop service-name

restart service-name

auto-restart {enable | disable | show} service-name

Parameters

service-name represents the name of the service that you want to stop or start:

System NTP

System SSH

Cisco IDS

Cisco Tomcat

Cisco Database Layer Monitor

Cisco Emergency Responder

Cisco Phone Tracking Engine

auto-restart causes a service to automatically restart.

enable enables auto-restart.

disable disables auto-restart.

show shows the auto-restart status.

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils service list

This command retrieves a list of all services and their status.

Command Syntax

utils service list [page]

Options

page—Displays the output one page at a time

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

utils sftp handshake

This command exchanges SFTP SSH keys to all members of the cluster.

Command Syntax

utils sftp handshake

utils snmp

This command manages SNMP on the server.

Command Syntax

utils snmp

get version community ip-address object [file]

hardware-agents [status | restart]

test

walk version community ip-address object [file]

Parameters

get displays the value of the specified SNMP object.

hardware-agents status displays the status of the hardware agents on the server.

hardware-agents stop stops all SNMP agents provided by the hardware vendor.

hardware-agents restart restarts the hardware agents on the server.

test tests the SNMP host by sending sample alarms to local syslog, remote syslog, and SNMP trap.

walk walks the SNMP MIB, starting with the specified SNMP object.

version specifies the SNMP version. Possible values are 1 or 2c.

community specifies the SNMP community string.

ip-address specifies the IP address of the server. Enter 127.0.0.1 to specify the local host. You can enter the IP address of another node in the cluster to run the command on that node.

object specifies the SNMP Object ID (OID) to get.

file specifies a file in which to save the command output.

Requirements

Command privilege level: 1

Allowed during upgrade: Yes

utils snmp walk 3

This command is used to walk the SNMP MIB starting with the specified OID.

Command Syntax

utils snmp walk 3

[system will prompt you for the parameters]

Example:

If you run snmp walk on a leaf in the MIB you basically get what you would get with 'utils snmp get ...' command. Here is the sample walk output we are getting for the OID 1.3.6

iso.3.6.1.2.1.1.1.0 = STRING: "Hardware:7825H, 1 Intel(R) Pentium(R) 4 CPU 3.40GHz, 2048 MB Memory: Software:UCOS 2.0.1.0-62"

iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.9.1.583

iso.3.6.1.2.1.1.3.0 = Timeticks: (15878339) 1 day, 20:06:23.39

iso.3.6.1.2.1.1.4.0 = ""

iso.3.6.1.2.1.1.5.0 = STRING: "bldr-ccm34.cisco.com"

iso.3.6.1.2.1.1.6.0 = ""

iso.3.6.1.2.1.1.7.0 = INTEGER: 72

iso.3.6.1.2.1.2.1.0 = INTEGER: 3

iso.3.6.1.2.1.2.2.1.1.1 = INTEGER: 1

iso.3.6.1.2.1.2.2.1.1.2 = INTEGER: 2

iso.3.6.1.2.1.2.2.1.1.3 = INTEGER: 3

iso.3.6.1.2.1.2.2.1.2.1 = STRING: "lo"

iso.3.6.1.2.1.2.2.1.2.2 = STRING: "eth0"

iso.3.6.1.2.1.2.2.1.2.3 = STRING: "eth1"

iso.3.6.1.2.1.2.2.1.3.1 = INTEGER: 24

iso.3.6.1.2.1.2.2.1.3.2 = INTEGER: 6

iso.3.6.1.2.1.2.2.1.3.3 = INTEGER: 6

iso.3.6.1.2.1.2.2.1.4.1 = INTEGER: 16436

iso.3.6.1.2.1.2.2.1.4.2 = INTEGER: 1500

iso.3.6.1.2.1.2.2.1.4.3 = INTEGER: 1500

iso.3.6.1.2.1.2.2.1.5.1 = Gauge32: 0

iso.3.6.1.2.1.2.2.1.5.2 = Gauge32: 100000000

iso.3.6.1.2.1.2.2.1.5.3 = Gauge32: 10000000

iso.3.6.1.2.1.2.2.1.6.1 = Hex-STRING: 00 00 00 00 00 00

iso.3.6.1.2.1.2.2.1.6.2 = Hex-STRING: 00 16 35 5C 61 D0

iso.3.6.1.2.1.2.2.1.6.3 = Hex-STRING: 00 16 35 5C 61 CF

iso.3.6.1.2.1.2.2.1.7.1 = INTEGER: 1

.....

If you provide an IP address of a remote host then the command is executed on that remote host. Note you have to provide the ip-address not domain name.

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils snmp get 3

This command gets the SNMP data for the specified MIB OID.

Command Syntax

utils snmp get 3

[system will prompt you for the parameters]

Example:

If you run it on a specific OID (leaf) in the MIB you would get the value of the MIB. Following is the snmp get output of system uptime iso.3.6.1.2.1.25.1.1.0 = Timeticks: (19836825) 2 days, 7:06:08.25

If you provide an IP address of a remote host then the command is executed on that remote host. Note you have to provide the ip-address not domain name.

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils system

This command allows you to restart the system on the same partition, restart the system on the inactive partition, or shut down the system.

Command Syntax

utils system {restart | shutdown | switch-version}

Parameters

restart restarts the system.

shutdown shuts down the system.

switch-version switches to the product release installed on the inactive partition.

Usage Guidelines

The utils system shutdown command has a 5-minute timeout. If the system does not shut down within 5 minutes, the command gives you the option of doing a forced shutdown.

Requirements

Command privilege level: 1

Allowed during upgrade: No

utils system boot

This commands redirects where the system boot output gets sent.

Command Syntax

utils system boot {console | serial | status}

Parameters

console redirects the system boot output to the console.

serial redirects the system boot output to the COM1 (serial port 1).

status displays the where the serial boot output will currently get sent.

Requirements

Level privilege: 1

Command privilege: 1

Allowed during upgrade: Yes

utils system upgrade

This command allows you to install upgrades and Cisco Option Package (COP) files from both local and remote directories.

Command Syntax

utils system upgrade {initiate | cancel | status}

Parameters

cancel cancels the active upgrade.

initiate starts a new upgrade wizard or assumes control of an existing upgrade wizard. The wizard prompts you for the location of the upgrade file.

status displays the status of an upgrade.

Usage Guidelines

To upgrade the system, follow these major steps:

1. Use the utils system upgrade list command to display a list of the .iso upgrade files that are available on the local disk or remote server from which you plan to upgrade.

2. Use the utils system upgrade get command to get the upgrade file that you want to use.

3. Use the utils system upgrade start command to start upgrading from the upgrade file you got.

utils vmtools status

This command will show the version of the currently running VMware Tools.

Command Syntax

utils vmtools status

Requirements

Command privilege level: 0

Allowed during upgrade: Yes

utils vmtools upgrade

This command will update the currently installed VMware Tools to the latest version prescribed by the ESXi host for that VM.

Command Syntax

utils vmtools upgrade

Commands which are not supported on VMWare

show environment fans

show environment power-supply

show environment temperatures

show memory size

show memory count

show memory modules all

utils create report hardware

utils snmp hardware-agents restart

utils snmp hardware-agents start

utils snmp hardware-agents status

utils snmp hardware-agents stop