Cisco Emergency Responder Administration Guide 7.1(1)
Using the Cisco Emergency Responder 7.1 Admin Utility
Downloads: This chapterpdf (PDF - 337.0KB) The complete bookPDF (PDF - 13.67MB) | Feedback

Using the Cisco Emergency Responder 7.1 Admin Utility

Table Of Contents

Using the Cisco Emergency Responder 7.1 Admin Utility

Changing the Cisco Unified Communications Manager Version

Updating the Cisco ER Cluster Database Host Details


Using the Cisco Emergency Responder 7.1 Admin Utility


In Cisco Emergency Responder (Cisco ER) 7.1, the Admin Utility is integrated into the Cisco ER itself. The Admin Utility has its own web interface that you can access from the main Cisco ER web page. As with the other Cisco ER administration web interfaces, the Admin Utility web interface is password protected.

These topics describe how to use the Cisco ER Admin Utility:

Changing the Cisco Unified Communications Manager Version

Updating the Cisco ER Cluster Database Host Details

Changing the Cisco Unified Communications Manager Version

To use the Admin Utility to change the Cisco Unified Communications Manager (Cisco Unified CM) version, follow these steps:

Procedure


Step 1 Log in to the Cisco ER Admin Utility web interface.

Step 2 From the main Cisco ER Admin Utility page, select Update > CCM Version. The Upgrade CCM Version page appears.

Step 3 From the Choose the CCM Version to Upgrade pulldown menu, select the new version of Cisco Unified CM, then click Go.


Note You must change the Cisco Unified CM version separately for the Publisher and Subscriber nodes.


Once the system makes the change, the Status area of the Upgrade CCM Version page displays the new version number.


Related Topics

Update CUCM Version, page E-1

Updating the Cisco ER Cluster Database Host Details

By default, each server in a cluster considers its own database to be the cluster database host. Since each cluster should have only one database host, you must update the cluster configuration accordingly.

For example, if you have two servergroups (Servergroup A and Servergroup B) each containing a Publisher and a Subscriber, you would do the following to update the cluster database host details:

1. Update the cluster database host password for Servergroup A using Servergroup A's own host name.

2. Update the cluster database host password for Servergroup B by entering the IP address and cluster database password for Servergroup A.

3. Repeat Step 2 for other servergroups in the cluster.


Note If you use hostnames, then the hostname must be resolvable using DNS. If DNS is not configured or DNS is unavailable for any reason, hostname resolution will fail and cluster functionality will be impaired. It is recommended that the DNS configuration include redundant entries to prevent unavailability. Alternatively, the IP address of the cluster database host can be configured on this screen.


To use the Admin Utility to update the Cisco ER cluster database host details, follow these steps:


Note You must reboot the server to update Cisco ER Cluster DB host details. Just restarting Cisco ER services does not work since the IP address is cached by other services.

This only updates the Cisco ER Cluster DB host details for this server group. Other servers in this Cisco ER cluster will not be updated automatically.


Procedure


Step 1 Log in to the Cisco ER Admin Utility web interface.

Step 2 From the main Cisco ER Admin Utility page, select Update > Cluster DBHost. The Update Cluster DB Host page appears.

Step 3 Enter the new Cluster DBHost name (if DNS is configured) or IP address in the text box. If the cluster is spread across domains, enter a fully qualified host name.

Step 4 Enter the password for the new Cluster DBHost in the Password text box.

Step 5 Reenter the password for the new Cluster DBHost in the Confirm Password text box.

Step 6 Click Go.


Related Topics

Update Cluster DB Host, page E-2