Guest

Cisco Emergency Responder

Cisco Emergency Responder Release Notes for 2.0(1)

  • Viewing Options

  • PDF (181.6 KB)
  • Feedback
Cisco Emergency Responder Release Notes for 2.0(1)

Table Of Contents

Cisco Emergency Responder Release Notes for 2.0(1)

Contents

Hardware and Software Requirements

Related Documentation

New and Changed Information

Installation Notes

Supported Upgrades

Important Upgrade Notes

Caveats

Using Bug Toolkit

Open Caveats

Resolved Caveats

Obtaining Documentation, Obtaining Support, and Security Guidelines

Acknowledgements


Cisco Emergency Responder Release Notes for 2.0(1)


June 15, 2007

These release notes describe the feature enhancement and caveats for Cisco Emergency Responder (Cisco ER) 2.0(1).

Contents

These release notes provide the following information:

Hardware and Software Requirements

Related Documentation

New and Changed Information

Installation Notes

Caveats

Obtaining Documentation, Obtaining Support, and Security Guidelines

Acknowledgements

Hardware and Software Requirements

Cisco ER 2.0 supports a variety of hardware and software components, as shown in the following tables.


Note The type of support can differ between types of hardware; read the tables carefully to determine how Cisco ER will work with the devices you use.


Table 1 lists other software that you must install to use Cisco ER 2.0.

Table 1 Required Software 

Item
Supported Software Version
Description

Data Migration Assistant (DMA)

Release 6.0(1)

Before you can upgrade from Cisco ER 1.3 to Cisco ER 2.0, you must use the Data Migration Assistant (DMA) tool to create a migration file containing your Cisco ER 1.3 configuration information. As part of the upgrade process, you will be prompted to provide the location of this migration file.

Cisco Unified CallManager and
Cisco Unified
Communications Manager

Cisco Unified CallManager 4.2

Cisco Unified CallManager 4.3

Cisco Unified Communications Manager 5.0

Cisco Unified Communications Manager 5.1

Cisco Unified Communications Manager 6.0

The software that runs the telephony network.

Web browser

Microsoft Internet Explorer 6.0

Mozilla Firefox 2.0

Internet Explorer is supported on Windows 2000, Windows NT, and Windows 95.


Table 2 contains optional software that is recommended for use with Cisco ER 2.0.

Table 2 Recommended Software 

Item
Minimum Software Version
Description

E-mail server

Any SMTP e-mail server

Used to send e-mail notifications to onsite alert (security) personnel. If you use an SMTP e-mail paging server, personnel are paged instead of e-mailed.

Cisco Unified Operations Manager

Note CiscoWorks IP Telephony Environment Monitor (ITEM) 2.0 is also supported.

Version 1.0

Used to monitor the health and functionality of Cisco ER.


Table 3 lists the different types of phones that support Cisco ER 2.0. The type of support Cisco ER 2.0 supplies differs depending on the type of phone and the type of switch port to which the phone is attached.

Table 3 Supported Phones 

Phones
Description
Phones automatically tracked using CDP

SCCP protocol on Cisco Unified IP Phone 7975, 7971, 7970, 7965, 7962, 7961, 7960, 7945, 7942, 7941, 7940, 7936, 7935, 7931, 7912, 7911, 7910, 7905, 7902, 7985

All other SCCP phones with CDP support, with the exception of ATA devices

SIP protocol on Cisco Unified IP Phone 7975, 7971, 7970, 7965, 7962, 7961, 7960, 7945, 7942, 7941, 7940, 7931, 7912, 7911, 7905

Cisco IP Communicator

These phones do not require special Cisco ER configuration. However, ensure that you enable Cisco Discovery Protocol (CDP) on the switches.

Note Although ATA phones support CDP and SCCP, Cisco ER cannot automatically track them. You can add ATA phones manually and assign them to an ERL. Cisco ER will route calls from ATA phones based on the assigned ERL.

Phones automatically tracked using CAM tables

Cisco Unified IP Phone 12 SP+ and VIP 30

To automatically track these phones, you must enable content-addressable memory (CAM) tracking when you add the switches to the Cisco ER configuration. Phones that do not use CDP are tracked using the CAM table on all supported switch platforms for Native and AUX VLANs.

Phones that you can track using IP subnet

Wireless phones, such as Cisco Unified Wireless IP Phone 7920/7921, and Cisco IP SoftPhones running on 802.11b

Supported Cisco Unified IP Phones connected to Cisco or third-party switches that are not discovered or recognized by Cisco ER

Cisco Unified Personal Communicator

Third-party SIP phones

To track these phones, you must configure the subnet and then assign ERLs to the configured subnets.

Note The use of CAM table tracking can result in the inadvertent discovery and unsupported use of wireless IP phone MACs for tracking purposes. To avoid mis-tracking of wireless IP phones, if CAM table tracking is enabled for a switch, the ERL configured for any switch port connected to a wireless access point must agree with the ERL configured for the IP subnet that will contain the phones connected to that access point.

Phones that you can manually define

Analog phones, for example, phones connected to VG 224/248 and ATA devices

Generic H.323 or SIP endpoints. Supported H.323 phones are Microsoft NetMeeting and Tandberg.

Any phone otherwise supported for automatic tracking that is connected to an unsupported switch port

These phones are only supported if their calls are routed by Cisco Unified Communications Manager.



Note Cisco ER supports SNMP version 1, version 2, and version 2c of a LAN switch.


Table 4 lists the switches that are supported for automatic tracking. You can use other switches, but you might have to manually define phones attached to those switches.

Table 4 Supported Voice-Ready LAN Switches 

Series
(Ethernet ports only)
Notes
Device Supported
System Object ID from CISCO-PRODUCTS-MIB

Catalyst 500 Express Switch

 

500-24TT

1.3.6.1.4.1.9.1.724

500-24LC

1.3.6.1.4.1.9.1.725

500-24PC

1.3.6.1.4.1.9.1.726

500G-12TC

1.3.6.1.4.1.9.1.727

Catalyst 2900 XL

12.01.5.WE12 and higher

2908 XL

1.3.6.1.4.1.9.1.170

2916 MXL

1.3.6.1.4.1.9.1.171

 

2924 XL

1.3.6.1.4.1.9.1.183

2924 CXL

1.3.6.1.4.1.9.1.184

2924 XLV

1.3.6.1.4.1.9.1.217

2924 CXLV

1.3.6.1.4.1.9.1.218

2912 XL

1.3.6.1.4.1.9.1.219

2924 MXL

1.3.6.1.4.1.9.1.220

2912 MXFL

1.3.6.1.4.1.9.1.221

2900

1.3.6.1.4.1.9.5.12

2926

1.3.6.1.4.1.9.5.35

2948 G

1.3.6.1.4.1.9.5.42

Catalyst 2940

Cisco IOS 12.1(22)EA1

2940-8TT-S

1.3.6.1.4.1.9.1.540

2940-8TF-S

1.3.6.1.4.1.9.1.542

Catalyst 2948

CatOS

2948G-GE-TX

1.3.6.1.4.1.9.5.62

Catalyst 2950

12.1.9.EA1 and higher

2950-12

1.3.6.1.4.1.9.1.323

2950-24

1.3.6.1.4.1.9.1.324

2950-24SX

1.3.6.1.4.1.9.1.480

2950-48SX

1.3.6.1.4.1.9.1.560

2950-48T

1.3.6.1.4.1.9.1.559

2950C-24

1.3.6.1.4.1.9.1.325

2950T-24

1.3.6.1.4.1.9.1.359

2950G-12

1.3.6.1.4.1.9.1.427

2950G-24

1.3.6.1.4.1.9.1.428

2950G-48

1.3.6.1.4.1.9.1.429

2950S-24

1.3.6.1.4.1.9.1.430

2950G-24DC

1.3.6.1.4.1.9.1.472

Catalyst 2960

Cisco IOS 12.2(25)SED

2960-24TC-L

1.3.6.1.4.1.9.1.694

2960-48TC-L

1.3.6.1.4.1.9.1.695

2960G-24TC-L

1.3.6.1.4.1.9.1.696

2960G-48TT-L

1.3.6.1.4.1.9.1.697

2960-24TT-L

1.3.6.1.4.1.9.1.716

2960-48TT-L

1.3.6.1.4.1.9.1.717

 

2960-8TC-L

1.3.6.1.4.1.9.1.798

2960G-8TC-L

1.3.6.1.4.1.9.1.799

Catalyst 3500 XL

Cisco IPS 12.0(5)XU or higher

If you are using Catalyst 3500 clusters, you must assign an IP address to each Catalyst 3500 switch.

3508 GXL

1.3.6.1.4.1.9.1.246

3512 XL

1.3.6.1.4.1.9.1.247

3524 XL

1.3.6.1.4.1.9.1.248

3548 XL

1.3.6.1.4.1.9.1.278

3524 PWR XL

1.3.6.1.4.1.9.1.287

Catalyst 3550

12/1/6/EA1a or higher

3550-24

1.3.6.1.4.1.9.1.366

3550-24PWR

1.3.6.1.4.1.9.1.485

3550-48

1.3.6.1.4.1.9.1.367

3550-12T

1.3.6.1.4.1.9.1.368

3550-12G

1.3.6.1.4.1.9.1.431

3550-24DC

1.3.6.1.4.1.9.1.452

Catalyst 3560

Cisco IOS 12.2(20)SE or higher

3560-24PS

1.2.6.1.4.1.9.1.563

3560-48PS

1.2.6.1.4.1.9.1.564

3560-24TS-S/-E

1.2.6.1.4.1.9.1.633

3560-48TS-S/-E

1.2.6.1.4.1.9.1.615

3560G-24TS-S/-E

1.2.6.1.4.1.9.1.634

3560G-48TS-S/-E

1.2.6.1.4.1.9.1.617

3560G-24PS-S/-E

1.2.6.1.4.1.9.1.614

3560G-48PS-S/-E

1.2.6.1.4.1.9.1.616

 

3560-8PC-S

1.3.6.1.4.1.9.1.797

Catalyst 3560E

Cisco IOS Release 12.2(35)SE2 or higher

3560E-48TD-S

1.3.6.1.4.1.9.1.794

3560E-48TD-E

1.3.6.1.4.1.9.1.794

3560E-48PD-SF

1.3.6.1.4.1.9.1.796

3560E-48PD-S

1.3.6.1.4.1.9.1.796

3560E-48PD-EF

1.3.6.1.4.1.9.1.796

3560E-48PD-E

1.3.6.1.4.1.9.1.796

3560E-24TD-S

1.3.6.1.4.1.9.1.793

3560E-24TD-E

1.3.6.1.4.1.9.1.793

3560E-24PD-S

1.3.6.1.4.1.9.1.795

3560E-24PD-E

1.3.6.1.4.1.9.1.795

Catalyst 3750

Cisco IOS 12.2(20)SE or higher

3750-24

1.3.6.1.4.1.9.1.511

3750-24FS-S

1.3.6.1.4.1.9.1.656

3750-48

1.3.6.1.4.1.9.1.512

3750-24TS

1.3.6.1.4.1.9.1.513

3750-24T

1.3.6.1.4.1.9.1.514

37XX Stack

1.3.6.1.4.1.9.1.516

3750G-12Sfp

1.3.6.1.4.1.9.1.530

3750-48PS

1.3.6.1.4.1.9.1.535

3750-24PS

1.3.6.1.4.1.9.1.536

3750G-16TD

1.3.6.1.4.1.9.1.591

3750G-24PS

1.3.6.1.4.1.9.1.602

3750G-48PS

1.3.6.1.4.1.9.1.603

3750G-48TS

1.3.6.1.4.1.9.1.604

3750G-24TS1U

1.3.6.1.4.1.9.1.624

3750G-24TS1U/-EIU

1.3.6.1.4.1.9.1.624

Catalyst 3750E

Cisco IOS Release 12.2(35)SE2 or higher

3750E-48TD-S

1.3.6.1.4.1.9.1.790

3750E-48TD-E

1.3.6.1.4.1.9.1.790

3750E-48PD-SF

1.3.6.1.4.1.9.1.791

3750E-48PD-S

1.3.6.1.4.1.9.1.791

3750E-48PD-EF

1.3.6.1.4.1.9.1.791

3750E-48PD-E

1.3.6.1.4.1.9.1.791

3750E-24TD-S

1.3.6.1.4.1.9.1.789

3750E-24TD-E

1.3.6.1.4.1.9.1.789

3750E-24PD-S

1.3.6.1.4.1.9.1.792

3750E-24PD-E

1.3.6.1.4.1.9.1.792

Catalyst 3750ME

Cisco IOS 12.2(25)EY

3750-24TE-M

1.3.6.1.4.1.9.1.574

Catalyst 4000

Cisco IOS 12.1(13)EW

4000 C

1.3.6.1.4.1.9.1.448

4503

1.3.6.1.4.1.9.1.503

4506

1.3.6.1.4.1.9.1.502

4507

1.3.6.1.4.1.9.1.501

4510R

1.3.6.1.4.1.9.1.537

4948-S-S/-E

1.3.6.1.4.1.9.1.626

4948-10GE-S/-E

1.3.6.1.4.1.9.1.627

Catalyst 4000/4500

Catalyst OS 5.5 or higher

4003

1.3.6.1.4.1.9.5.40

4912 G

1.3.6.1.4.1.9.5.41

4006

1.3.6.1.4.1.9.5.46

4500

1.3.6.1.4.1.9.1.14

4503

1.3.6.1.4.1.9.5.58

4506

1.3.6.1.4.1.9.5.59

Catalyst 4900 Metro

 

ME-4924-10GE

1.3.6.1.4.1.9.1.706

Catalyst 4948

Cisco IOS 12.2(20)EWA

4948

1.3.6.1.4.1.9.1.626

4948-10GE

1.3.6.1.4.1.9.1.627

Catalyst 5000

Catalyst OS 6.x

5000

1.3.6.1.4.1.9.5.7

5002

1.3.6.1.4.1.9.5.29

Catalyst 5500

 

5500

1.3.6.1.4.1.9.5.17

5505

1.3.6.1.4.1.9.5.34

5509

1.3.6.1.4.1.9.5.36

Catalyst 6500

Catalyst OS

6503

1.3.6.1.4.1.9.5.56

6509 NEB-A chassis

1.3.6.1.4.1.9.5.61

Catalyst OS 5.5 or higher

If using an MSFC module, Cisco IOS 12.1(3a)XL

6006

1.3.6.1.4.1.9.5.38

6009

1.3.6.1.4.1.9.5.39

6509

1.3.6.1.4.1.9.5.44

6506

1.3.6.1.4.1.9.5.45

6509 SP

1.3.6.1.4.1.9.5.47

6513

1.3.6.1.4.1.9.5.50

Catalyst 6500

Cisco IOS

6503

1.3.6.1.4.1.9.1.449

6006

1.3.6.1.4.1.9.1.280

6009

1.3.6.1.4.1.9.1.281

6506

1.3.6.1.4.1.9.1.282

6509

1.3.6.1.4.1.9.1.283

6509 NEB-A chassis

1.3.6.1.4.1.9.1.534

6509 SP

1.3.6.1.4.1.9.1.310

6513

1.3.6.1.4.1.9.1.400

Cisco 2800 Integrated Services Routers

Cisco IOS 12.3(8)T4

Cisco 2811

Cisco 2821

Cisco 2851

1.3.6.1.4.1.9.1.576

1.3.6.1.4.1.9.1.577

1.3.6.1.4.1.9.1.578

Cisco 3725 Multiservice Access Router

Image version:
IOS 12.2(8)T5

 

1.3.6.1.4.1.9.1.414

Cisco 3745 Multiservice Access Router

Image version:
IOS 12.2(13)T

 

1.3.6.1.4.1.9.1.436

Cisco 3800 Integrated Services Routers

Cisco IOS

Cisco 3825

1.3.6.1.4.1.9.1.543

Cisco 3845

1.3.6.1.4.1.9.1.544


Cisco ER 2.0 supports the Cisco MCS Unified Communications Manager Appliance platforms shown in Table 5; Table 6 lists scalability for these platforms.


Note Cisco ER does not support Cisco Integrated Communications System (ICS) 7750 servers.


Table 5 lists the supported Media Convergence Server (MCS) platforms.

Table 5 Supported MCS Platforms 

Cisco MCS Server
Equivalent OEM Server
CPU

MCS-7816-H3-IPC1

 

3.2 GHz

MCS-7816-I3-IPC1

 

3.2 GHz

MCS-7825H-2.2-EVV1

HP DL320-G2

2.26 GHz

MCS-7825H-3.0-IPC1

HP DL320-G2

3.06 GHz

MCS-7825I-3.0-IPC1
IBM x306
3.06 GHz

MCS-7825-H1-IPC1

HP DL320-G3

3.4 GHz

MCS-7825-I1-IPC1

IBM x306

3.4 GHz

MCS-7825-H2-IPC1

HP DL320-G4

2.8 GHz

MCS-7825-I2-IPC1

IBM x306m

2.8 GHz

MCS-7825-H2-IPC2

HP DL320-G4

3.4 GHz

MCS-7825-I2-IPC2

IBM x306m

3.4 GHz

MCS-7825-H3-IPC1

HP DL320-G5

2.13 GHz

MCS-7825-I3-IPC1

IBM x3250

2.13 GHz

MCS-7835H-2.4-EVV1

HP DL380-G3 (1 CPU)

2.4 GHz

MCS-7835I-2.4-EVV1

IBM x345 (1 CPU)

2.4 GHz

MCS-7835H-3.0-IPC1

HP DL380-G3 (1 CPU)

3.06 GHz

MCS-7835I-3.0-IPC1

IBM x345 (1 CPU)

3.06 GHz

MCS-7835-H1-IPC1

HP DL380-G4 (1 CPU)

3.4 GHz

MCS-7835-I1-IPC1

IBM x346 (1 CPU)

3.4 GHz

MCS-7835-H2-IPC1

HP DL380-G5 (1 CPU)

2.33 GHz

MCS-7835-I2-IPC1

IBM x3650 (1 CPU)

2.33 GHz

MCS-7845H-2.4-EVV1

HP DL380-G3 (2 CPUs)

2.4 GHz

MCS-7845H-3.0-IPC1

HP DL380-G3 (2 CPUs)

3.06 GHz

MCS-7845I-3.0-IPC1

IBM x345 (2 CPUs)

3.06 GHz

MCS-7845-H1-IPC1

HP DL380-G4 (2 CPUs)

3.4 GHz

MCS-7845-I1-IPC1

IBM x346 (2 CPUs)

3.4 GHz

MCS-7845-H2-IPC1

HP DL380-G5 (2 CPUs)

2.33 GHz

MCS-7845-I2-IPC1

IBM x3650 (2 CPUs)

2.33 GHz

MCS-7815I-3.0-IPC1

 

3.06 GHz

MCS-7815I-3.0-IPC2

 

3.06 GHz

MCS-7815-I1-IPC1

 

3.4 GHz

MCS-7815-I1-IPC2

 

3.4 GHz

MCS-7815-I1-IPC3

 

3.4 GHz

MCS-7815-I1-IPC4

 

3.4 GHz

MCS-7815-I2-IPC1

 

2.8 GHz



Note The following servers are supported for upgrades from Cisco ER 1.x only and are not supported for new installations: MCS-7815I-3.0-IPC1, MCS-7815I-3.0-IPC2, MCS-7815-I1-IPC1, MCS-7815-I1-IPC2, MCS-7815-I1-IPC3, MCS-7815-I1-IPC4, and MCS-7815-I2-IPC1.



Note Cisco ER 2.0 requires a minimum of 2GB RAM and a 72GB hard drive.


Table 6 shows the scalability of supported MCS platforms.

Table 6 Supported Cisco ER 2.0 MCS Platforms and Scalability

Scalability
Cisco MCS 7825 Media
Convergence
Servers
Cisco MCS 7835 Media
Convergence
Servers
Cisco MCS 7845 Media
Convergence
Servers

Switches

500

1,000

2,000

Switch Ports

30,000

60,000

120,000

Manual Phones

2,500

5,000

10,000

Roaming Phones (remote Cisco ER group)

1,200 per Cisco ER cluster

2,000 per Cisco ER cluster

3,000 per Cisco ER cluster

IP Phones

12,000

20,000

30,000


Related Documentation

Cisco Emergency Responder Documentation

Refer to the publications for Cisco ER 2.0. Navigate from the following documentation URL:

http://www.cisco.com/en/US/products/sw/voicesw/ps842/tsd_products_support_series_home.html

Cisco Unified Communications Manager Documentation

Refer to the Cisco Unified Communications Manager Documentation Guide and other publications specific to your Cisco Unified Communications Manager release. Navigate from the following URL:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html

New and Changed Information

The following new features are available in Cisco Emergency Responder 2.0:

Installation and upgrade using a single DVD

FLEXlm licensing

Role-based user management

Disaster recovery

Data migration using the Cisco Data Migration Assistant (DMA)

Cisco ER 2.0 clusters can include both Cisco ER 2.0 and Cisco ER 1.3 server groups

HTTPS supported in Cisco ER 2.0 server groups

Support for additional IP phones

Unlocated phone search allows user to search for a specific unlocated phone

Ability to download the results of a Call History search

Integrated ALI Formatting Tool (AFT) for all supported service providers

Installation Notes

This section describes upgrade information for Cisco ER 2.0(1) and includes these topics:

Supported Upgrades

Important Upgrade Notes

Supported Upgrades

You must upgrade to Cisco ER 2.0 from Cisco ER 1.3.x only. You cannot upgrade directly to Cisco ER 2.0 from earlier versions of Cisco ER, or download Cisco ER 2.0 from the Cisco.com website.

Important Upgrade Notes

Once you upgrade your system to Cisco ER 2.0, you cannot downgrade your system to earlier Cisco ER versions.

Caveats

This section includes these topics:

Using Bug Toolkit

Open Caveats

Resolved Caveats

Using Bug Toolkit

Known problems (bugs) are graded according to severity level. These release notes contain descriptions of:

All severity level 1 or 2 bugs.

Significant severity level 3 bugs.

You can search for problems by using the Cisco Software Bug Toolkit.

To access Bug Toolkit, you need the following items:

Internet connection

Web browser

Cisco.com user ID and password

To use the Software Bug Toolkit, follow these steps:

Procedure


Step 1 To access the Bug Toolkit, go to http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl.

Step 2 Log on with your Cisco.com user ID and password.

Step 3 To look for information about a specific problem, enter the bug ID number in the "Search for Bug ID" field and click Go.


Open Caveats

Table 7 lists Severity 1, 2 and 3 defects that are open for Cisco ER 2.0(1).

For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL shown. You must be a registered Cisco.com user to access this online information.

Because defect status continually changes, be aware that Table 7 reflects a snapshot of the defects that were open at the time this report was compiled. For an updated view of open defects, access Bug Toolkit as described in the Using Bug Toolkit.

Table 7 Open Caveats for Cisco ER 2.0(1) 

Identifier
Headline and Bug Toolkit Link

CSCsh61004

CER memory increases when constant 911calls are made on a loaded system

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsh61004

CSCsh79007

Commn b/w CER pub in a diff SG and the clusterDBhost is partially secure

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsh79007

CSCsi66811

CER allows assigning Test ERLs to all phone types

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsi66811

CSCsi48711

DMA Backup of CER 131a does not backup active Call history file (Error)

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsi48711

CSCsj24030

Unable to upload Publisher license due to hostname mismatch after W1 upgrade

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj24030

CSCsj26242

CER Diagnostic Alerts don't have the originating server details

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj26242

CSCsj10748

7920 Wireless Phones get discovered behind switchport

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj10748


Resolved Caveats

There are no resolved defects for Cisco ER 2.0(1).

Obtaining Documentation, Obtaining Support, and Security Guidelines

For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Acknowledgements

This product includes software developed by Justin Wells and Semiotek Inc. for use in the WebMacro Servlet Framework (http://www.webmacro.org).

You may use WebMacro for use under the GNU General Public License. You may also use WebMacro under the terms of the Semiotek Public License. The terms of the Semiotek Public License are as follows:

Copyright (c) 1997, 1998, 1999, 2000 Semiotek Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by Justin Wells and Semiotek Inc. for use in the WebMacro Servlet Framework (http://www.webmacro.org)."

4. The names "Semiotek Inc." and "WebMacro" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact justin@webmacro.org

5. Products derived from this software may not be called "WebMacro" nor may "WebMacro" appear in their names without prior written permission of Justin Wells.

6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by Justin Wells and Semiotek Inc. for use in the WebMacro Servlet Framework (http://www.webmacro.org)."

THIS SOFTWARE IS PROVIDED BY SEMIOTEK INC. "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES OR CONDITIONS, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SEMIOTEK INC. OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.