Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SIP) (2.15, Rev B0)
Voice Menu Codes
Downloads: This chapterpdf (PDF - 175.0KB) The complete bookPDF (PDF - 2.41MB) | Feedback

Voice Menu Codes

Table Of Contents

Voice Menu Codes


Voice Menu Codes


This section contains a quick-reference list of the voice configuration menu options for the Cisco ATA.

This section contains the following tables:

Cisco ATA Voice Menu Codes—Information Options

Cisco ATA Voice Menu Codes—Configuration Parameters

Cisco ATA Voice Menu Codes—Software Upgrade


Note Follow each voice menu code with #.



Note The term Cisco ATA refers to both the Cisco ATA 186 and the Cisco ATA 188, unless otherwise stated.


Table B-1 lists codes to return basic Cisco ATA information.

Table B-1 Cisco ATA Voice Menu Codes—Information Options 

Option
Voice Menu Code
Description

Build information

123123

Build date of the Cisco ATA software

Review IP address

21

Returns IP address of the Cisco ATA

Review MAC address

24

Returns media access control (MAC) address of the Cisco ATA

Review network route IP address

22

Returns IP address of the network route

Review subnet mask

23

Returns subnet mask of the network route

Version number

123

Returns version number of the Cisco ATA software


Table B-2 lists configuration codes.

Table B-2 Cisco ATA Voice Menu Codes—Configuration Parameters 

Option
Voice Menu Code
Description

Alternate NTP IP address

78

IP address of the alternate NTP server

Audio mode

312

Allows finer control of the audio component to suit certain user applications

Call features

314

Subscribed features statically enabled by the user

Caller ID method

316

Specifies the signal format when generating the Caller ID format to use

TFTP Configuration Interval

80002

Interval (in seconds) between configuration updates when TFTP configuration is used,

Connection mode

311

Controls the connection mode of the call signaling protocol

Dynamic Host Configuration Protocol (DHCP)

20

Controls whether the Cisco ATA can automatically obtain configuration parameters from a server over the network

DNS 1 IP

916

IP address of the primary DNS server

DNS 2 IP

917

IP address of the secondary DNS server

Encrypt key

320

Encrypts the configuration file on the TFTP server

Num Tx frames

35

Number of frames transmitted per packet

Gatekeeper/proxy server IP address

5

SIP registration proxy server IP address

IP address

1

IP address of the Cisco ATA

LBR codec

300

Low bit rate codec selection

Login ID 0

46

Alternate user ID used for authentication

Login ID 1

47

Alternate user ID used for authentication

Media port

202

Specifies which base port the Cisco ATA uses to receive RTP media streams

Network route address

2

Network router address

NPrintf address

81

IP address of a host to which all Cisco ATA debug messages are sent

NTP server address

141

IP address of the NTP server

Paid features

315

Features subscribed to by the user

Polarity

304

Controls connect and disconnect polarity

PWD 0

4

Password associated with the primary phone line (UID0 or LoginID0)

PWD 1

14

Password associated with the secondary phone line (UID1 or LoginID1)

Rx codec

36

Selects the audio codec type to use to decode received data. The call-receiving station automatically adjusts to the call-initiating station's audio codec type if the call-receiving station supports that audio codec.

Set password

7387277

Configuration interface password

Signal timers

318

Timeout values controlling the starting or stopping of a signaling event

SIP max number of redirects

205

Maximum number of redirections the Cisco ATA will attempt to reach a callee when making a call

SIP NAT IP address

200

WAN IP of the NAT

SIP outbound proxy

206

IP address of the outbound proxy server to which all outgoing SIP requests are sent

SIP port

201

Specifies which port the Cisco ATA listens to for incoming SIP messages

SIP protocol

38

Selects the signaling protocol

SIP registration On

204

Enables SIP registration

SIP registration period

203

Interval (in seconds) between each registration renewal to the SIP registration server

Subnet mask

10

Specifies the subnet mask for the Cisco ATA

TFTP URL

905

IP address of the TFTP server when TFTP configuration is used

Timezone

302

Specifies offset to GMT—used to time-stamp incoming calls for caller ID

ToConfig

80001

Identifies unconfigured or already-configured Cisco ATAs

Trace Fflags

313

Enables logging of debug information

Tx Codec

37

Selects transmitting audio codec preference

UDP TOS bits

255

Determines the precedence and delay of UDP IP packets

UID 0

3

User ID (telephone number) for the PHONE 1 port

UID 1

13

User ID (telephone number) for the PHONE 2 port

Use login ID

93

Determines which pair (UIDx, PWDx or LoginIDx, PWDx) to use for authentication

Use TFTP

305

Enables TFTP as configuration method


Table B-3 lists codes used in the software upgrade process. For information about these codes, see "."

Table B-3 Cisco ATA Voice Menu Codes—Software Upgrade 

Option
Voice Menu Code
Description

Upgrade software

100

Used in the software process to enter the IP address of the PC

Upgrade language to English

101

When upgrading software, changes or upgrades the voice prompt language to English