Guest

Cisco BTS 10200 Softswitch

Appendix C: Use Dial Plan Token Routing Impact

  • Viewing Options

  • PDF (151.2 KB)
  • Feedback
Use Dial Plan Token Routing Impact

Table Of Contents

Use Dial Plan Token Routing Impact


Use Dial Plan Token Routing Impact


Table C-1 shows how the use-dial-plan token in the Carrier table impacts routing.

Table C-1 Use Dial Plan Token's Routing Impact

Type of Call
USE-DIAL-PLAN=1
USE-DIAL-PLAN=0

NAT

1+ Call

Route based on dial plan.

Route based on Carrier table.

OPR

0-, 00 Operator Call

Based on EA-USE-PIC1 flag in the Subscriber Profile table. The EA-USE-PIC1 specifies treatment of 00, 0+, 01+ interLATA calls from pre-subscribed lines for equal access. If the EA-USE-PIC1 flag is set to N, the call is routed to the LEC OSS, else use PIC1.

If a Carrier supports operator services, the use route guide defined in the Carrier table, else use LECOSS-RG.

Same as USE-DIAL-PLAN = 1

NAT-OPR

0+ call

Based on EA-USE-PIC1 flag in the Subscriber Profile table. The EA-USE-PIC1 specifies treatment of 00, 0+, 01+ interLATA calls from pre-subscribed lines for equal access. If the EA-USE-PIC1 flag is set to N, the call is routed to the LEC OSS, else use PIC1.

If a Carrier supports operator services, use the route guide defined in the Carrier table, else use LECOSS-RG.

Same as USE-DIAL-PLAN = 1

SAC

SAC call (500, 700, 900).

Route based on dial plan.

Route based on Carrier table.

DA

Directory assistance (DA, DA-TOLL).

Route based on dial plan.

Route based on Carrier table.

TOLL-FREE

Toll-free call (8XX).

Route based on dial plan.

Route based on Carrier table.

INTL

011+ International call.

Route based on international dial plan.

Route based on Carrier table.

INTL-OPR

01+ international operator call.

Based on EA-USE-PIC1 flag in the Subscriber Profile table. The EA-USE-PIC1 specifies treatment of 00, 0+, 01+ interLATA calls from pre-subscribed lines for equal access. If the EA-USE-PIC1 flag is set to N, the call is routed to the LEC OSS, else use PIC1.

If a Carrier supports operator services, use the route guide defined in the Carrier table, else use LECOSS-RG.

Same as USE-DIAL-PLAN = 1

CUT-THRU

101XXXX+#

Use Carrier information; use the route guide defined in the Carrier table.

Same as USE-DIAL-PLAN = 1

COIN

Coin line (OLI = 23, 27, 70).

Use Carrier information. If a Carrier supports operator services, use the route guide defined in the Carrier table, else use LECOSS-RG.

Same as USE-DIAL-PLAN = 1

HM

Hotel motel line (OLI = 6).

Use Carrier information. If a Carrier supports operator services, use the route guide defined in the Carrier table, else use LECOSS-RG.

Same as USE-DIAL-PLAN = 1