Cisco UCS Manager CLI Configuration Guide, Release 1.3(1)
Managing the I/O Modules
Downloads: This chapterpdf (PDF - 394.0 KB) The complete bookPDF (PDF - 4.5 MB) | Feedback

Managing the I/O Modules

Managing the I/O Modules

This chapter includes the following sections:

Resetting the IOM

  Command or Action Purpose
Step 1 UCS-A# scope chassis chassis-num  

Enters chassis mode for the specified chassis.

Step 2 UCS-A /chassis # scope iom {a b}  

Enters chassis IOM mode for the specified IOM.

Step 3 UCS-A /chassis/iom # reset  

Resets the IOM.

Step 4 UCS-A /chassis/iom # commit-buffer  

Commits the transaction to the system configuration.


The following example resets the IOM on fabric A and commits the transaction:

UCS-A# scope chassis 1
UCS-A /chassis # scope iom a
UCS-A /chassis/iom # reset
UCS-A /chassis/iom* # commit-buffer
UCS-A /chassis/iom #