Cisco Host Upgrade Utility Release 1.4(5) Quick Start Guide

Available Languages

Download Options

  • PDF     (526.7 KB)
    View with Adobe Reader on a variety of devices
Updated:September 29, 2017

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Cisco Host Upgrade Utility

Cisco Host Upgrade Utility

Overview

The Cisco Host Upgrade Utility (hereafter referred to as the "HUU") is a tool that upgrades the following firmware:

  • Cisco Integrated Management Controller (CIMC)
  • System BIOS
  • LAN on motherboard (LOM)
  • RAID controllers (for any third-party RAID controllers that are installed)
  • Cisco UCS P81E Virtual Interface Card (VIC)
  • Broadcom PCI adapters
    • 5709 Dual and Quad port adapters
    • 57712 Dual port adapter
    • 57712 10GBaseT adapter
  • Intel i350 Quad port adapter

The HUU includes the options to download ISO images for a selected platform on a Windows operating system. The image file for the firmware is embedded in the ISO and the HUU displays a menu that allows you to choose which firmware components to upgrade.

Requirements and Support

Requirements

Important:

Separate ISO images are released for each server platform. Be sure to download the correct ISO image for the server.

Server

Container

Minimum CIMC and BIOS Version Required to Use This Utility

C220

1.4(4)

CIMC version: 1.4(4)

BIOS version: 1.4.4c.0

C240

1.4(4)

CIMC version: 1.4(4)

BIOS version: 1.4.4c.0

Support

Using HUU

You can use the HUU ISO to upgrade components of the server from the host locally with a writable disk (DVD or CD), or remotely by mounting the HUU ISO as a virtual device.

Procedure
    Step 1   Download the HUU ISO file:
    1. Navigate to the following URL: http://www.cisco.com/cisco/software/navigator.html.
    2. Click Unified Computing and Servers in the middle column.
    3. Click Cisco UCS C-Series Rack-Mount Standalone Server Software in the right-hand column.
    4. Click the name of your model of server in the right-hand column.
    5. Click Unified Computing System (UCS) Server Firmware.
    6. Click the release number.
    7. Click Download Now to download the ucs-server platform-huu-version_number.iso file.
    8. Verify the information on the next page, then click Proceed With Download.
    9. Continue through the subsequent screens to accept the license agreement and browse to a location where you want to save the file.
    Step 2   If you want to prepare the ISO for a local upgrade, complete this step. Otherwise go to Step 3.
    1. Burn the ISO image onto a writable disk (DVD, USB flash drive or CD).
    2. Connect a VGA monitor and USB keyboard to the Cisco C-Series server.
    3. Insert the disk into the DVD drive of the Cisco C-Series server.
    4. Go to Step 4.
    Step 3   Prepare the ISO for a remote upgrade using KVM Console.
    1. Use a browser to connect to the CIMC GUI software on the server that you are upgrading.
    2. Enter the CIMC IP address for that server in the address field of the browser, then enter your username and password.
    3. Click Launch KVM Console on the toolbar to launch the KVM Console.
    4. Click the Virtual Media tab in the KVM Console.
    5. Click Add Image and click the ucs-server-name-huu-version_number.iso file.
    6. In the Client View area, check the check box in the Mapped column for the ISO file that you added and then wait for mapping to complete.
    7. After the ISO file appears as a mapped remote device, go to Step 4.
    Step 4   Boot the server and press F6 when prompted to open the Boot Menu screen.
    Step 5   In the Boot Menu screen, select the prepared ISO:
    • For a local upgrade, select the physical CD/DVD device and then press Enter. For example, SATA5:TSSTcorp CDDVDW TS-L633C.
    • For a remote upgrade, choose Cisco Virtual CD/DVD, and press Enter.

    The server reboots from the selected device.
    Step 6   The server displays a screen with the server BIOS and CIMC firmware versions. At the “Have you read the Cisco EULA” (end user license agreement)? prompt:
    • Press y to accept the EULA and continue the update.
    • Press n to read the EULA. The EULA is displayed and you are prompted to press y to continue the update, or n to cancel. If you press n, the server will reboot without updating.
    • Press q to exit without updating. This option restarts the server.

    After you accept the EULA, the server displays the Host Upgrade Menu.
    Step 7   On the Host Upgrade Menu, enter one of the following numbers at the Enter Choice prompt:
    Option Description

    0. Inventory

    HUU allows you to view the server inventory details.

    1. Update CIMC Firmware

    HUU selects the correct CIMC firmware for your server and then performs the upgrade.

    Wait until you see confirmation that the upgrade was successful, then either choose other option from this menu or restart the server.

    Note   

    If you restart the server using option 10 (Reboot the machine), the new firmware version gets activated during the reboot.
    Note   

    We recommend that you always upgrade the BIOS when you upgrade the CIMC firmware.

    2. Update BIOS

    HUU selects the correct BIOS firmware for your server and then performs the upgrade.

    Note   

    We recommend that you always upgrade the CIMC firmware when you upgrade the BIOS.

    3. Update LOM Firmware

    HUU selects the correct LOM firmware for your server and then performs the upgrade. The updated image reverts LOM firmware settings back to factory defaults.

    Wait until you see confirmation that the upgrade was successful, then either choose another option from this menu or restart the server.

    4. Update LSI Firmware

    HUU checks for any installed and supported LSI storage controller cards, selects the correct LSI firmware, and then performs the upgrade.

    Wait until you see confirmation that the upgrade was successful, then either choose another option from this menu or restart the server.

    Note   

    These upgrades take place after the server restarts.

    5. Update UCS P81E VIC

    HUU checks for any installed Cisco UCS P81E Virtual Interface Card (VICs), selects the correct firmware, and then performs the upgrade.

    Wait until you see confirmation that the upgrade was successful, then either choose another option from this menu or restart the server.

    6. Update BCM firmware
    HUU selects the correct firmware versions for Broadcom PCI adapters and then performs the upgrade. With this release, you can upgrade firmware versions for the following Broadcom PCI adapters:
    • 5709 Dual and Quad port adapters
    • 57712 Dual port adapter
    • 57712 10GBaseT adapter

    Wait until you see confirmation that the upgrade was successful, then either choose another option from this menu or restart the server.

    7. Update Intel I350 (Quad Port)

    HUU selects the Intel I350 Quad port adapter and performs the upgrade.

    Wait until you see the confirmation that the upgrade was successful, then either choose another option from this menu or restart the server.

    8. All of the above

    HUU selects the correct firmware components for your server and then upgrades the CIMC, LOM, LSI, Cisco UCS P81E Virtual Interface Card firmware, PCI adapters, and BIOS in that order.

    Note   

    After you select this option, the connection with CIMC ends and the CIMC IP will be accessible only after a few minutes. You must log in again to reestablish the CIMC connection and reopen any KVM sessions that you had open.

    9. Save logs into USB

    You can save debugging logs into the USB drive that is either connected to the server or is mapped through vMedia. If a USB device is not available, HUU prompts you to insert it into the server.

    10. Reboot the machine

    HUU restarts the server.

    Note   

    If you upgrade CIMC using option 1 (Update CIMC firmware) and then restart the server using this option, the connection with the CIMC ends and the CIMC IP will be accessible only after a few minutes. You must log in again to reestablish the CIMC connection and reopen any KVM sessions that you had open.

    If you upgrade BIOS using option 2 (Update BIOS) or option 8 (All of the above) the server displays the following message prompt:

    Updating BIOS will power down the server. This can take few minutes, do you want to continue (y/n)
    • Press y to continue with the BIOS upgrade.
    • Press n to abort the BIOS upgrade.

    If you continue with the BIOS upgrade, the server displays the following message prompt:

    Do you want to automatically power up the server once bios update is completed (y/n)
    • Press y to automatically switch on the server after the BIOS is upgraded.
    • Press n to manually switch on the server after the BIOS is upgraded.

    Troubleshooting

    The following table describes troubleshooting suggestions for issues that you might encounter.

    Issue

    Suggested Solution

    Connection to CIMC is lost after an update and reboot and the KVM session ends.

    This is expected behavior after a firmware update. Log back in to the CIMC and reestablish your KVM session.

    The following error message is observed:

    PID, Board Part Number, Product Part Number <PID, Board Part Number, Product Part Number> is not supported by this HUU image. HUU will not boot on this machine. Press any key to reboot the server.

    This error message is displayed when the HUU ISO is not supported by the server. Use the HUU ISO that is supported by the server.

    Additional Information

    Related Cisco UCS Documentation

    Documentation Roadmaps

    For a complete list of all B-Series documentation, see the Cisco UCS B-Series Servers Documentation Roadmap available at the following URL: http://www.cisco.com/go/unifiedcomputing/b-series-doc.

    For a complete list of all C-Series documentation, see the Cisco UCS C-Series Servers Documentation Roadmap available at the following URL: http://www.cisco.com/go/unifiedcomputing/c-series-doc .

    Other Documentation Resources

    An ISO file containing all B and C-Series documents is available at the following URL: http://www.cisco.com/cisco/software/type.html?mdfid=283853163&flowid=25821. From this page, click Unified Computing System (UCS) Documentation Roadmap Bundle.

    The ISO file is updated after every major documentation release.

    Follow Cisco UCS Docs on Twitter to receive document update notifications.

    Obtaining Documentation and Submitting a Service Request

    For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation.

    Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.

    Follow Cisco UCS Docs on Twitter to receive document update notifications.

    Documentation Feedback

    To provide technical feedback on this document, or to report an error or omission, please send your comments to ucs-docfeedback@external.cisco.com. We appreciate your feedback.

    Notices

    Copyright © 2012, Cisco Systems, Inc. All rights reserved.

    Was this Document Helpful?

    FeedbackFeedback

    Contact Cisco

    This Document Applies to These Products