Step 5
| In the
Configure
Boot Order dialog box, from the
Add
Boot Device table, choose the device that you want add to the boot
order.
To add the local
HDD device, click
Add
Local HDD, and update the following parameters:
Name
|
Description
|
Name field
|
The name
of the device.
Note
|
Once
created, you cannot rename the device.
|
|
State drop-down list
|
The
visibility of the device by BIOS. This can be one of the following:
-
Enabled—The device is visible to BIOS in a boot
order configuration.
-
Disabled—The device is not visible to BIOS in a boot
configuration.
|
Order field
|
The order
of the device in the available list of devices.
Enter
between 1 and n, where n is the number of devices.
|
Slot field
|
The slot
in which the device is installed.
Enter a
number between 0 and 255 or M for MEZZ.
|
Add Device button
|
Adds the
device to the Boot
Order table.
|
Cancel button
|
Closes the
dialog box without saving any changes made while the dialog box was open.
|
To add the PXE
device, click
Add
PXE, and update the following parameters:
Name
|
Description
|
Name field
|
The name
of the device.
This name
cannot be changed after the device has been created.
|
Status drop-down list
|
The
visibility of the device by BIOS. The state can be one of the following:
-
Enabled—The device is visible to BIOS in a boot
order configuration.
-
Disabled—The device is not visible to BIOS in a boot
order configuration.
|
Order field
|
The order
of the device in the available list of devices.
Enter
between 1 and n, where n is the number of devices.
|
Slot field
|
The slot
in which the device is installed.
Enter a
number between 0 and 255 or L for LOM.
|
Port field
|
The port
of the slot in which the device is present.
Enter a
number between 0 and 255.
|
Add Device button
|
Adds the
device to the Boot
Order table.
|
Cancel button
|
Closes the
dialog box without saving any changes made while the dialog box was open.
|
To add the SAN
boot device, click
Add
SAN, and update the following parameters:
Name
|
Description
|
Name field
|
The name
of the device.
This name
cannot be changed after the device has been created.
|
State drop-down list
|
The
visibility of the device by BIOS. The state can be one of the following:
-
Enabled—The device is visible to BIOS in a boot
order configuration.
-
Disabled—The device is not visible to BIOS in a boot
order configuration.
|
Order field
|
The order
of the device in the available list of devices.
Enter
between 1 and n, where n is the number of devices.
|
Slot field
|
The slot
in which the device is installed.
Enter a
number between 0 and 255.
|
Add Device button
|
Adds the
device to the Boot
Order table.
|
Cancel button
|
Closes the
dialog box without saving any changes made while the dialog box was open.
|
To add the
iSCSI boot device, click
Add
iSCSI, and update the following parameters:
Name
|
Description
|
Name field
|
The name
of the device.
This name
cannot be changed after the device has been created.
|
State drop-down list
|
The
visibility of the device by BIOS. The state can be one of the following:
-
Enabled—The device is visible to BIOS in a boot
order configuration.
-
Disabled—The device is not visible to BIOS in a boot
order configuration.
|
Order field
|
The order
of the device in the available list of devices.
Enter
between 1 and n, where n is the number of devices.
|
Slot field
|
The slot
in which the device is installed.
Enter a
number between 0 and 255.
|
Port field
|
The port
of the slot in which the device is present.
Enter
number between 0 and 255.
|
Add Device button
|
Adds the
device to the Boot
Order table.
|
Cancel button
|
Closes the
dialog box without saving any changes made while the dialog box was open.
|
To add the SD
card, click
Add
SD Card, and update the following parameters:
Name
|
Description
|
Name field
|
The name
of the device.
This name
cannot be changed after the device has been created.
|
State drop-down list
|
The
visibility of the device by BIOS. This can be one of the following:
-
Enabled—The device is visible to BIOS in a boot
order configuration.
-
Disabled—The device is not visible to BIOS in a boot
configuration.
|
Order field
|
The order
of the device in the available list of devices.
Enter
between 1 and n, where n is the number of devices.
|
Add Device button
|
Adds the
device to the Boot
Order table.
|
Cancel button
|
Closes the
dialog box without saving any changes made while the dialog box was open.
|
To add the USB
device, click
Add
USB, and update the following parameters:
Name
|
Description
|
Name field
|
The name
of the device.
This name
cannot be changed after the device has been created.
|
Sub Type drop-down list
|
The
subdevice type under a certain device type. This can be one of the following:
|
State drop-down list
|
The
visibility of the device by BIOS. This can be one of the following:
-
Enabled—The device is visible to BIOS in a boot
order configuration.
-
Disabled—The device is not visible to BIOS in a boot
order configuration.
|
Order field
|
The order
of the device in the available list of devices.
Enter
between 1 and n, where n is the number of devices.
|
Add Device button
|
Adds the
device to the Boot
Order table.
|
Cancel button
|
Closes the
dialog box without saving any changes made while the dialog box was open.
|
To add the
virtual media, click
Virtual Media, and update the following parameters:
Name
|
Description
|
Name field
|
The name
of the device.
This name
cannot be changed after the device has been created.
|
Sub Type drop-down list
|
The
subdevice type under a certain device type. This could be any one of the
following:
-
KVM Mapped DVD
-
Cisco IMC Mapped
DVD
-
KVM Mapped HDD
-
Cisco IMC Mapped
HDD
-
KVM Mapped FDD
|
State drop-down list
|
The
visibility of the device by BIOS. The state can be one of the following:
-
Enabled—The device is visible to BIOS in a boot
order configuration.
-
Disabled—The device is not visible to BIOS in a boot
order configuration.
|
Order field
|
The
order of the device in the available list of devices.
Enter
between 1 and n, where n is the number of devices.
|
Cancel button
|
Closes the
dialog box without saving any changes made while the dialog box was open.
|
To add the PCH
storage device, click
PCH
Storage, and update the following parameters:
Name
|
Description
|
Name field
|
The name
of the device.
This name
cannot be changed after the device has been created.
|
State drop-down list
|
The
visibility of the device by BIOS. This can be one of the following:
-
Enabled—The device is visible to BIOS in a boot
order configuration.
-
Disabled—The device is not visible to BIOS in a boot
order configuration.
|
Order field
|
The order
of the device in the available list of devices.
Enter
between 1 and n, where n is the number of devices.
|
LUN field
|
Logical
unit in a slot where the device is present.
Enter a
number between 0 and 255.
|
Add Device button
|
Adds the
device to the Boot
Order table.
|
Cancel button
|
Closes the
dialog box without saving any changes made while the dialog box was open.
|
To add the
UEFLI shell device, click
Add
UEFI Shell, and update the following parameters:
Name
|
Description
|
Name field
|
The name
of the device.
This name
cannot be changed after the device has been created.
|
State drop-down list
|
The
visibility of the device by BIOS. The state can be one of the following:
-
Enabled—The device is visible to BIOS in a boot
order configuration.
-
Disabled—The device is not visible to BIOS in a boot
order configuration.
|
Order field
|
The order
of the device in the available list of devices.
Enter
between 1 and n, where n is the number of devices.
|
Add Device button
|
Adds the
device to the Boot
Order table.
|
Cancel button
|
Closes the
dialog box without saving any changes made while the dialog box was open.
|
|