Cisco Driver Installer Utility, Release 2.2(1) User Guide
Using the Utility
Downloads: This chapterpdf (PDF - 87.0 KB) The complete bookPDF (PDF - 213.0 KB) | Feedback

Using the Cisco Driver Installer Utility

Table Of Contents

Using the Cisco Driver Installer Utility

Opening the Utility

Installing the Driver Updates

Using the Cisco Driver Installer Utility

This chapter discusses the tasks that you can perform using the Cisco Driver Installer utility. This chapter discusses the following topics:

Opening the Utility

Installing the Driver Updates

Opening the Utility

The Cisco Driver Installer Utility is available on the Cisco UCS Server Configuration Utility (SCU) 2.2(1) CD and is also available on the Cisco Flexible Flash card of the Cisco UCS C260 M2 server.

To open the utility, follow these steps:

Step 1 Ensure that your server and operating system supports this utility. For more information, see sections Supported Operating Systems and Versions and Supported Hardware Platforms.

Step 2 Insert the Cisco UCS SCU 2.2(1) CD into the CD drive of the server.

The autorun of the CD is initiated.

On UCS C260 M2 servers, you can launch the utility either from the UCS SCU CD or from the Cisco Flexible Flash card. To launch the utility from the Cisco Flexible Flash card, follow these steps:

a. Access the volume named UCS_SCU.

b. Run the SCUAutoRun.exe file in the SCU root directory.

Step 3 Click Launch Cisco Driver Installer Utility.

The Cisco Driver Installer utility opens.

When you open the utility, a list of all device drivers that are currently installed in the server is displayed, along with the available updated versions. The Action column indicates either Install, Update, or Force Update based on the current device driver version. The Reboot column indicates whether a reboot is required after the update is installed. The Remarks column indicates whether the update installation was successful.

Installing the Driver Updates

After you open the Cisco Driver Installer utility GUI, you can either update the driver versions individually or you can select all the drivers and install the updates. Irrespective of what you choose to do, the procedure to install the updates is the same. Using this utility, you can install the driver updates from one of the following locations:

CD / Flex Flash

A location on the network

To determine the most recent driver versions, see the Hardware and Software Interoperability Matrix for C Series Servers available at:

To install updates on a driver, follow these steps:

Step 1 Select the drivers on which you want to install the updates.

After you select a driver, the Driver Description field is populated with information about the driver.

Step 2 Click Settings to view the Driver Source page.

Step 3 On this page, specify the location of the updates that you want to install. You can select one of the following:

CD / Flex Flash


Step 4 If you selected CD / Flex Flash, driver updates are installed from the Cisco Flexible Flash card of the server.

Alternatively, you can copy the driver updates from the Cisco FlexFlash card on to a CD and use the CD option to install them.

Step 5 If you selected Network, you should have already downloaded the driver package that contains the updated driver versions to a location on the network. This driver package is a zipped file that contains several other zipped files that contain the updated driver versions. To install the driver updates using the Network option, follow these steps:

c. Click Browse to search for and select the zipped file that contains the updated driver version.

d. Click Open.

e. In the Driver Source dialog box, click OK.

Step 6 If you selected, you are prompted to enter your registered username and password to access the driver updates on

After you enter your credentials, the utility retrieves the driver packages from the website.

Step 7 Click Install to start installing the driver updates.

Step 8 To confirm that you want to continue with the installation, click Yes in the confirmation dialog box.

A progress bar indicates the progress of the installation.

Step 9 After the driver updates are installed, the Remarks column indicates Success.

Some drivers might require a reboot for the new version to take effect. In such cases, you are prompted to determine if you would like to restart the server immediately or at a later time.

Step 10 Click Refresh to view the updated version information of all the drivers.