The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Contents
A - C - D - E - F - G - P - R - S - T - U -Index
A
activate (firmware)
C
cancel
clear (log)
clear (sel)
clear-cmos
Command Mode Table
commit
connect
D
discard
E
exit
F
factory-default (cimc)
G
generate-csr (certificate)
P
ping (network)
power (chassis)
R
reapply (bios)
reboot (chassis)
recover (bios)
S
scope bios
scope certificate
scope chassis
scope cimc
scope fault
scope firmware (bios)
scope http
scope ipblocking (network)
scope ipmi
scope kvm
scope ldap
scope log (cimc)
scope network (cimc)
scope pef (fault)
scope sel
scope sensor
scope sol
scope ssh
scope tech-support (cimc)
scope trap-destination (fault)
scope user
scope user-session
scope vmedia
set (chassis)
set (fault)
set (http)
set (ipblocking)
set (ipmi)
set (kvm)
set (ldap)
set (network)
set (sol)
set (ssh)
set (user)
set (vmedia)
set action (pef)
set addr (trap-destination)
set boot-order (bios)
set cli output
set description (chassis)
set enabled (trap-destination)
set locator-led (chassis)
set path (tech-support)
set send-alert (pef)
set tftp-ip (tech-support)
show actual-boot-order (bios)
show bios
show certificate
show chassis
show cimc
show configuration pending
show cpu (chassis)
show current (sensor)
show dimm (chassis)
show entries (log)
show entries (sel)
show fan (sensor)
show fault
show firmware (cimc)
show hdd (chassis)
show http
show ipblocking (network)
show ipmi
show kvm
show ldap
show led (chassis)
show network (cimc)
show pef (fault)
show psu (chassis)
show psu (sensor)
show psu-redundancy (sensor)
show sol
show ssh
show tech-support (cimc)
show temperature (sensor)
show trap-destination (fault)
show user
show user-session
show version
show vmedia
start
T
terminate (user-session)
top
U
update (firmware)
upload (certificate)