The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
|
|
---|---|
Use this command to clear a forced upgrade of the audio peripheral. You can see if a peripheral is set for a forced upgrade by running the show upgrade detail command. Each peripheral marked for a forced upgrade will be followed by an “F” in the output. You can mark a peripheral by using the set upgrade commands. See Set Commands .
|
|
---|---|
|
|
---|---|
Use this command to clear a forced upgrade of the auxiliary-ctrl peripheral. You can see if a peripheral is set for a forced upgrade by running the show upgrade detail command. Each peripheral marked for a forced upgrade will be followed by an “F” in the output. You can mark a peripheral by using the
set upgrade commands. See Set Commands .
|
|
---|---|
|
|
---|---|
Use this command to clear a forced upgrade of the camera peripheral. You can see if a peripheral is set for a forced upgrade by running the show upgrade detail command. Each peripheral marked for a forced upgrade will be followed by an “F” in the output. You can mark a peripheral by using the set upgrade commands. See Set Commands
|
|
---|---|
|
|
---|---|
Use this command to clear a forced upgrade of the display peripheral. You can see if a peripheral is set for a forced upgrade by running the show upgrade detail command. Each peripheral marked for a forced upgrade will be followed by an “F” in the output. You can mark a peripheral by using the set upgrade commands. See Set Commands .
|
|
---|---|
|
|
---|---|
Use this command to clear a forced upgrade of the firmware peripheral. You can see if a peripheral is set for a forced upgrade by running the show upgrade detail command. Each peripheral marked for a forced upgrade will be followed by an “F” in the output. You can mark a peripheral by using the set upgrade commands. See Set Commands .
|
|
---|---|
|
|
---|---|
The command, unset upgrade disp-driver-2, was replaced by unset upgrade graphic-driver. |
|
Use this command to clear a forced upgrade of the graphic driver. You can see if a peripheral is set for a forced upgrade by running the show upgrade detail command. Each peripheral marked for a forced upgrade will be followed by an “F” in the output. You can mark a peripheral by using the set upgrade commands. See Set Commands .
|
|
---|---|
|
|
---|---|
The command, unset upgrade disp-driver-1, was replaced with unset upgrade graphic-icons. |
|
Use this command to clear a forced upgrade of the of the graphic icons. You can see if a peripheral is set for a forced upgrade by running the show upgrade detail command. Each peripheral marked for a forced upgrade will be followed by an “F” in the output. You can mark a peripheral by using the set upgrade commands. See Set Commands .
|
|
---|---|
|
|
---|---|
Use this command to clear a forced upgrade of the of the microcontroller.
|
|
---|---|