Guest

Cisco TelePresence MCU 4200 Series

Getting MCUs to appear under 'MCUs' on TMS

How do I get my Cisco TelePresence MCUs to appear under MCUs on the Cisco TelePresence Management Suite (Cisco TMS)?

This article applies to the following products:

  • Cisco TelePresence MCU 4200 Series
  • Cisco TelePresence MCU 4500 Series
  • Cisco TelePresence MCU 5300 Series
  • Cisco TelePresence MCU MSE Series
  1. On each Cisco TelePresence MCU, go to Network > Services and enable the SNMP service.
  2. In Cisco TMS, go to Systems > Navigator and click Add Systems. Then follow the usual steps for adding systems to Cisco TMS.

April 3rd, 2013 TAA_KB_160