Cisco TelePresence Manager CLI Command Reference Guide 1.8
Diag Commands
Downloads: This chapterpdf (PDF - 149.0KB) The complete bookPDF (PDF - 1.08MB) | Feedback

Diag Commands

Table Of Contents

Diag Commands

diag display loopback full disable

diag display loopback full enable

diag display loopback full status

diag display register dump


Diag Commands


Revised: October 10, 2011, OL-22227-01

This chapter contains the following diag commands:

diag display loopback full disable

diag display loopback full enable

diag display loopback full status

diag display register dump

diag display loopback full disable

diag display loopback full disable

Syntax Description

None

Command Modes

Admin

Command privilege level: 1

Command History

Release
Modifications

1.2

This command was first documented.


Usage Guidelines

Use this command to terminate a full diagnostic display loopback.

Examples

admin:diag display loopback full disable
Stopping Display Loopback

Related Commands

Command
Description

diag display loopback full enable

Initiates a full diagnostic display loopback.

diag display loopback status

Gives the status of the full diagnostic display loopback.


diag display loopback full enable

diag display loopback full enable timeout value

Syntax Description

timeout value

How long the loopback should run (in seconds). The value should be between 10 and 3600 (default is 60).


Command Modes

Admin

Command privilege level: 1

Command History

Release
Modifications

1.2

This command was first documented.


Usage Guidelines

Use this command to initiate a full diagnostic display loopback. You must stop the calling service to perform this loopback.


Note Remember to restart the calling services when done.


Examples

admin:diag display loopback full enable timeout 60
Loopback is now running

Related Commands

Command
Description

diag display loopback full disable

Terminates a full diagnostic display loopback.

diag display loopback status

Gives the status of the full diagnostic display loopback.


diag display loopback full status

diag display loopback full status

Syntax Description

None

Command Modes

Admin

Command privilege level: 1

Command History

Release
Modifications

1.2

This command was first documented.


Usage Guidelines

Use this command for the status of the full diagnostic display loopback.

Examples

admin:diag display loopback full status
Loopback is not running

Related Commands

Command
Description

diag display loopback full disable

Terminates a full diagnostic display loopback.

diag display loopback full enable

Initiates a full diagnostic display loopback.


diag display register dump

diag display register dump

Syntax Description

None

Command Modes

Admin

Command privilege level: 1

Command History

Release
Modifications

1.4.1

This command was first introduced.


Usage Guidelines

Use this command to download diagnostic display register information. To retrieve the diagnostic display register information, use the utils logs generate command.

Examples

admin:diag display register dump

Related Commands

Command
Description

utils logs generate

Generates log files.