Cisco TelePresence WebEx OneTouch First-Time Configuration Checklist
Revised: August, 2011, OL-21352-01
Contents
•Server and Site Access Checklist
•Configuration Task Checklist
Server and Site Access Checklist
Table 2-1 describes information you must have before you can configure Cisco TelePresence WebEx OneTouch for the first time.
:
Configuration Task Checklist
Tip You can choose the order in which you wish to configure Cisco TelePresence components for Cisco TelePresence WebEx OneTouch; the following order is only a suggestion, though you must complete all of the configuration steps in this checklist to enable the feature and Cisco TelePresence must be enabled before you can configure Cisco WebEx Site Administration.
1. Cisco TelePresence MultiPoint Switch
2. Cisco Unified Communications Manager
3. Cisco TelePresence Manager
4. Cisco WebEx Site Administration
Cisco TelePresence MultiPoint Switch
Table 2-2 Checklist — Configuring Cisco TelePresence WebEx OneTouch on the CTMS for the First Time
Cisco Unified Communications Manager
Table 2-3 Checklist — Configuring Cisco TelePresence WebEx OneTouch on Cisco Unified CM for the First Time
Cisco TelePresence Manager
Table 2-4 Checklist — Configuring Cisco TelePresence WebEx OneTouch on CTS-Manager for the First Time
Cisco WebEx Site Administration
Table 2-5 Checklist — Setting up Cisco WebEx Site Administration for the First Time