Cisco TelePresence System 1100 Assembly, First-Time Setup, and Field-Replaceable Unit Guide
Use and Care Guide
Downloads: This chapterpdf (PDF - 120.0KB) The complete bookPDF (PDF - 14.14MB) | Feedback

Use and Care Guide

Table Of Contents

Use and Care Guide

Cleaning the CTS 1100 Display


Use and Care Guide


Revised: September 9, 2009, OL-19695-01

Cleaning the CTS 1100 Display

The display requires special consideration when cleaning. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.


Tip You can use the microfiber cloth that is provided in the CTS 1100 assembly kit to clean the display and display bezel. The part number is 51-5266-01.


If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water to which a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same type until the surface is dry.