ME 3800x and ME 3600x Switches Software Configuration Guide, Release 15.2(4)S
Supported MIBs
Downloads: This chapterpdf (PDF - 84.0KB) The complete bookPDF (PDF - 11.82MB) | Feedback

Supported MIBs

Table Of Contents

Supported MIBs

MIB List

Using FTP to Access the MIB Files


Supported MIBs


This appendix lists the supported management information base (MIBs) for this release on the Cisco ME 3800X and ME 3600X switch.

TDR MIB also supported

MIB List

Using FTP to Access the MIB Files

MIB List

BGP4-MIB

BRIDGE-MIB


Note The BRIDGE-MIB supports the context of a single VLAN. By default, SNMP messages using the configured community string always provide information for VLAN 1. To obtain the BRIDGE-MIB information for other VLANs, for example VLAN x, use this community string in the SNMP message: configured community string @x.


CISCO-CDP-MIB

CISCO-CLASS-BASED-QOS-MIB

CISCO-ENTITY-FRU-CONTROL-MIB

CISCO-ENTITY-SENSOR MIB

CISCO-ETHER-CFM-MIB

CISCO-FLASH-MIB

CISCO-HSRP-MIB

CISCO-IETF-PW-MIB

CISCO-IMAGE-MIB

CISCO-MEMORY-POOL-MIB

CISCO-NAC-NAD-MIB

CISCO-PAE-MIB

CISCO-PAGP-MIB

CISCO-PROCESS-MIB

CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB

CISCO-STP-EXTENSIONS-MIB

CISCO-VTP-MIB

DOM MIB

ENTITY-MIB

IEEE8023-LAG-MIB

HOST-RESOURCES-MIB

IF-MIB

IF-Table

IS-IS MIB

LLDP MIB

OLD-CISCO-CHASSIS-MIB

OLD-CISCO-SYS-MIB

OSPF-MIB

RFC1213-MIB (Functionality is as per the agent capabilities specified in the CISCO-RFC1213-CAPABILITY.my.)

RMON-MIB

RMON2-MIB

SNMPv2-MIB

TDR-MIB


Note For information about MIB support for a specific Cisco product and release, go to the MIB Locator tool at this URL:
http://tools.cisco.com/ITDIT/MIBS/MainServlet


Using FTP to Access the MIB Files

You can obtain each MIB file by using this procedure:


Step 1 Make sure that your FTP client is in passive mode.


Note Some FTP clients do not support passive mode.


Step 2 Use FTP to access the server ftp.cisco.com.

Step 3 Log in with the username anonymous.

Step 4 Enter your e-mail username when prompted for the password.

Step 5 At the ftp> prompt, change directories to /pub/mibs/v1 and /pub/mibs/v2.

Step 6 Use the get MIB_filename command to obtain a copy of the MIB file.