ME 3800x and ME 3600x Switches Software Configuration Guide, Release 15.1(2)EY
Supported MIBs
Downloads: This chapterpdf (PDF - 57.0 KB) The complete bookPDF (PDF - 8.64 MB) | Feedback

Table of Contents

Supported MIBs

MIB List

Using FTP to Access the MIB Files

Supported MIBs

This appendix lists the supported management information base (MIBs) for this release on the Cisco ME 3800X and ME 3600X switch.

TDR MIB also supported

MIB List

  • BGP4-MIB
  • BRIDGE-MIB

Note The BRIDGE-MIB supports the context of a single VLAN. By default, SNMP messages using the configured community string always provide information for VLAN 1. To obtain the BRIDGE-MIB information for other VLANs, for example VLAN x, use this community string in the SNMP message: configured community string @x.


  • CISCO-CDP-MIB
  • CISCO-CLASS-BASED-QOS-MIB
  • CISCO-ENTITY-FRU-CONTROL-MIB
  • CISCO-ENTITY-SENSOR MIB
  • CISCO-ETHER-CFM-MIB
  • CISCO-FLASH-MIB
  • CISCO-HSRP-MIB
  • CISCO-IETF-PW-MIB
  • CISCO-IMAGE-MIB
  • CISCO-MEMORY-POOL-MIB
  • CISCO-NAC-NAD-MIB
  • CISCO-PAE-MIB
  • CISCO-PAGP-MIB
  • CISCO-PROCESS-MIB
  • CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB
  • CISCO-STP-EXTENSIONS-MIB
  • CISCO-VTP-MIB
  • DOM MIB
  • ENTITY-MIB
  • HOST-RESOURCES-MIB
  • IF-MIB
  • IF-Table
  • IS-IS MIB
  • LLDP MIB
  • OLD-CISCO-CHASSIS-MIB
  • OLD-CISCO-SYS-MIB
  • OSPF-MIB
  • RFC1213-MIB (Functionality is as per the agent capabilities specified in the CISCO-RFC1213-CAPABILITY.my.)
  • RMON-MIB
  • RMON2-MIB
  • SNMPv2-MIB
  • TDR-MIB

Note For information about MIB support for a specific Cisco product and release, go to the MIB Locator tool at this URL:
http://tools.cisco.com/ITDIT/MIBS/MainServlet


Using FTP to Access the MIB Files

You can obtain each MIB file by using this procedure:


Step 1 Make sure that your FTP client is in passive mode.


Note Some FTP clients do not support passive mode.


Step 2 Use FTP to access the server ftp.cisco.com.

Step 3 Log in with the username anonymous.

Step 4 Enter your e-mail username when prompted for the password.

Step 5 At the ftp> prompt, change directories to /pub/mibs/v1 and /pub/mibs/v2.

Step 6 Use the get MIB_filename command to obtain a copy of the MIB file.