Cisco EnergyWise Configuration Guide, EnergyWise Phase 2
Downloads: This chapterpdf (PDF - 44.0KB) The complete bookPDF (PDF - 2.52MB) | Feedback

Troubleshooting EnergyWise

Table Of Contents

Troubleshooting EnergyWise

Using CLI Commands

Verifying the Power Usage

Troubleshooting EnergyWise

Using CLI Commands

Verifying the Power Usage

Using CLI Commands

Table 4-1 show Privileged EXEC Commands 


show energywise

Displays the settings and status for the entity.

show energywise children

show energywise children provisioned

Displays the status of the connected end points.

Displays a summary of the EnergyWise information for the switch and the connected end points.

show energywise domain

Displays the domain to which the entity belongs.

show energywise events

Display the last ten events (messages) sent to other entities in the domain.

show energywise neighbors

Displays the neighbor tables for the switch.

show energywise recurrences

Displays the EnergyWise settings and status for recurrence.

show energywise statistics

Displays the counters for events and errors.

show energywise usage

Displays the actual power usage on the entity.

show energywise version

Displays the EnergyWise version.

show version

Displays the software version.

show power inline

Displays the PoE status.

show cdp neighbors

Displays the neighbors discovered by CDP.

For more information about the commands, see Chapter 3, "EnergyWise CLI Commands," and the platform-specific command references on

Verifying the Power Usage

This example shows that the Cisco 7960 IP Phone uses 6.3 W and that the Cisco 7970G IP Phone uses 10.3 W.

Switch# show energywise usage children
Interface   Name            Usage      Caliber
---------   ----            -----      -------
            Switch          144.0 (W)  max
Gi0/1       Gi0.1           6.3 (W)    trusted
Gi0/2       Gi0.2           10.3 (W)   trusted