Cisco EnergyWise Configuration Guide, EnergyWise Phase 1
Supported Platforms
Downloads: This chapterpdf (PDF - 35.0KB) The complete bookPDF (PDF - 1.34MB) | Feedback

Supported Platforms

Table Of Contents

Supported Platforms


Supported Platforms


To display the EnergyWise version and the Cisco IOS software running on the domain member, use the show energywise version and show version privileged EXEC command-line interface (CLI) commands.

For EnergyWise Phase 1, the version is EnergyWise Specification 0.1.12.

Table A-1 Cisco Domain Memebers Supporting EnergyWise Specification 0.1.12

Network Device
Minimum Cisco IOS Release

Catalyst 3750-E switch

12.2(50)SE

Catalyst 3750 switch

12.2(50)SE

Catalyst 3560-E switch

12.2(50)SE

Catalyst 3560 switch

12.2(50)SE

Catalyst 2975 switch

12.2(52)SE

Catalyst 2960 switch running the LAN base image

12.2(50)SE

Cisco Catalyst Blade Switch 3040 for FSC

12.2(50)SE

Cisco Catalyst Blade Switch 3130 and 3032 for Dell

12.2(50)SE

Cisco Catalyst Blade Switch 3030 for Dell

12.2(50)SE

Cisco Catalyst Blade Switch 3120 for HP

12.2(50)SE

Cisco Catalyst Blade Switch 3020 for HP

12.2(50)SE

Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter

12.2(50)SE