Catalyst IE 3000 Switch System Message Guide, Cisco IOS Release 12.2(58)SE
Downloads: This chapterpdf (PDF - 85.0 KB) The complete bookPDF (PDF - 790.0 KB) | Feedback


Table Of Contents





Related Publications

Obtaining Documentation and Submitting a Service Request



This guide is for the networking professional managing the Cisco IE 3000 switch. Before using this guide, you should have experience working with the Cisco IOS software and the switch software features.


This guide describes the Cisco IE 3000 switch-specific system messages that you might encounter. For a complete list of Cisco IOS system error messages, see the Cisco IOS Software System Error Messages, Cisco IOS Release 12.2.

This guide does not describe how to install your switch or how to configure software features on your switch. It also does not provide detailed information about commands that have been created or changed for use by the switch. For hardware installation information, see the hardware installation guide that shipped with your switch. For software information, see the software configuration guide and the command reference for this release.

For documentation updates, see the release notes for this release.


This publication uses these conventions to convey instructions and information:

Command descriptions use these conventions:

Commands and keywords are in boldface text.

Arguments for which you supply values are in italic.

Square brackets ([ ]) mean optional elements.

Braces ({ }) group required choices, and vertical bars ( | ) separate the alternative elements.

Braces and vertical bars within square brackets ([{ | }]) mean a required choice within an optional element.

Interactive examples use these conventions:

Terminal sessions and system displays are in screen font.

Information you enter is in boldface screen font.

Nonprinting characters, such as passwords or tabs, are in angle brackets (< >).

Notes use this convention and symbol:

Note Means reader take note. Notes contain helpful suggestions or references to materials not in this manual.

Related Publications

These documents provide complete information about the switch and are available from this site:

Note Before installing, configuring, or upgrading the switch, see these documents:

For initial configuration information, see the "Using Express Setup" chapter in the getting started guide or the "Configuring the Switch with the CLI-Based Setup Program" appendix in the hardware installation guide.

For device manager requirements, see the "System Requirements" section in the release notes on

For Network Assistant requirements, see the Getting Started with Cisco Network Assistant on

For cluster requirements, see the Release Notes for Cisco Network Assistant on

For upgrade information, see the "Downloading Software" section in the release notes.

See these documents for other information about the switch:

Release Notes for the Cisco IE 3000 Switch

Cisco IE 3000 Switch Software Configuration Guide

Cisco IE 3000 Switch Command Reference

Cisco IE 3000 Switch Hardware Installation Guide

Cisco IE 3000 Switch Getting Started Guide

Regulatory Compliance and Safety Information for the Cisco IE 3000 Switch

Device manager online help (available on the switch)

Getting Started with Cisco Network Assistant

Release Notes for Cisco Network Assistant

Cisco Small Form-Factor Pluggable Modules Installation Notes

For information about the Network Admission Control (NAC) features, see the Network Admission Control Software Configuration Guide

Compatibility matrix document

Cisco Gigabit Ethernet Transceiver Modules Compatibility Matrix

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.