Catalyst 4500 Series Installation Guide
Specifications
Downloads: This chapterpdf (PDF - 300.0KB) The complete bookPDF (PDF - 7.4MB) | Feedback

Table Of Contents

Specifications

Catalyst 4503 Switch Specifications

Catalyst 4506 Switch Specifications

Catalyst 4507R Switch Specifications

Catalyst 4510R Switch Specifications

Catalyst 4500 Series Power Supplies


Specifications


Cable and technical specifications for Catalyst 4500 series switches are provided in the following sections:

Catalyst 4503 Switch Specifications

Catalyst 4506 Switch Specifications

Catalyst 4507R Switch Specifications

Catalyst 4510R Switch Specifications

Catalyst 4500 Series Power Supplies


Note Specifications for individual switching modules and supervisor engines, including power consumption and thermal output information, are in the Catalyst 4500 Series Module Installation Guide, available online at: http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/configuration/notes/OL_25315.html



Note When populating empty chassis slots, start filling the upper slots first and work down to the bottom slots.


Catalyst 4503 Switch Specifications

Table A-1 lists the Catalyst 4503 switch specifications.

Table A-1 Catalyst 4503 Switch Specifications 

Item
Specification
Environmental
 

Temperature,
ambient operating


32 to 104°F (0 to 40°C)

Temperature,
ambient nonoperating and storage


-40 to 167°F (-40 to 75°C)

Humidity (RH), ambient (noncondensing), operating


10 to 90%

Humidity (RH), ambient (noncondensing), nonoperating and storage


5 to 95%

Altitude,
operating and nonoperating


-200 to 6500 ft (-60 to 2000 m)

Switching Components
 

Backplane

24 Gbps full duplex backplane
4 Gbps Uplinks

Port density

116 ports when using a Catalyst 4500 Series Supervisor Engine II-Plus TS, 96 ports with other supervisor engines

Inline power

integrated support, 820 W per switching module

Physical Characteristics
 

Dimensions (H x W x D)

12.25 x 17.31 x 12.50 in. (31.12 x 43.97 x 31.70 cm)

7 RU

Weight

Minimum weight: 31.25 lb (14.1 kg)
Maximum weight: 75 lb (34 kg)

Chassis and backplane: 29 lb (13.1 kg)
Fan tray: 2.25 lb (1.0 kg)

Airflow
 

Switch

Right to left

Power supply

Front to back

Power

PoE supplied

-48 VDC

Power to Modules and fans

12 VDC

Power to backplane components

3.3 VDC

Redundancy
 

Supervisor engine

no

Power supply

1 + 1


Catalyst 4506 Switch Specifications

Table A-2 lists the Catalyst 4506 switch specifications.

Table A-2 Catalyst 4506 Switch Specifications 

Item
Specification
Environmental
 

Temperature,
ambient operating
ambient nonoperating and storage


32 to 104°F (0 to 40°C)
-40 to 167°F (-40 to 75°C)

Humidity (RH), ambient (noncondensing): operating
nonoperating and storage


10 to 90%
5 to 95%

Altitude:
operating
nonoperating


-500 to 6500 ft (-150 to 2000 m)
-1000 to 30,000 ft (-300 to 9150 m)

Switching Components
 

Backplane

60 Gbps full duplex
4 Gbps Uplinks

Port density

240 (max)

Inline power

integrated support, 820 W per line card

Physical Characteristics
 

Dimensions (H x W x D)

17.38 x 17.31 x 12.50 in. (44.13 x 43.97 x 31.70 cm)

10 RU

Weight

Minimum weight: 40.5 lb (18.4 kg)
Maximum weight: 100 lb (45.4 kg)

Chassis and backplane = 36.5 lb (16.5 kg)
Fan tray: 4.0 lb (1.8 kg)

Airflow
 

Switch

Right to left

Power supply

Front to back

Power

PoE supplied

-48 VDC

Power to Modules and fans

12 VDC

Power to backplane components

3.3 VDC

Redundancy
 

Supervisor engine

no

Power supply

1 + 1


Catalyst 4507R Switch Specifications

Table A-3 lists the Catalyst 4507R switch specifications.

Table A-3 Catalyst 4507R Switch Specifications 

Item
Specification
Environmental
 

Temperature,
ambient operating
ambient nonoperating and storage


32 to 104°F (0 to 40°C)
-40 to 167°F (-40 to 75°C)

Humidity (RH), ambient (noncondensing): operating
nonoperating and storage


10 to 90%
5 to 95%

Altitude:
operating
nonoperating


-500 to 6500 ft (-150 to 2000 m)
-1000 to 30,000 ft (-300 to 9150 m)

Switching Components
 

Backplane

60 Gbps full duplex
4 Gbps Uplinks with Sup II+, Sup III, and Sup IV
8 Gbps Uplinks with Supervisor Engine V

Port density

240 (max)

Inline power

integrated support, 820 W per line card

Physical Characteristics
 

Dimensions (H x W x D)

19.19 x 17.31 x 12.50 in. (48.74 x 43.97 x 31.70 cm)

11 RU

Weight

Minimum weight: 44.25 lb (20.1 kg)
Maximum weight: 100 lb (45.4 kg)

Chassis and backplane: 40.0 lb (18.1 kg)
Fan tray: 4.2 lb ( 1.9 kg)

Airflow
 

Switch

Right to left

Power supply

Front to back

Power

PoE supplied

-48 VDC

Power to Modules and fans

12 VDC

Power to backplane components

3.3 VDC

Redundancy
 

Supervisor engine

yes

Power supply

1 + 1



Note The blank line card (C4K-SLOT-CVR-E) must be installed when either of the following two situations occur:

If your Catalyst 4507R or Catalyst 4510R switch chassis has a Supervisor Engine 6-E (WS-X45-SUP6-E) or a Supervisor Engine 6L-E (WS-X45-SUP6L-E) installed in slot 1 and slot 2 is empty, you must install the blank line card (C4K-SLOT-CVR-E) in slot 2 rather than a blank faceplate (C4K-SLOT-CVR) . A blank faceplate covering the slot 2 opening does not direct sufficient airflow to adequately cool the Supervisor Engine 6-E or the Supervisor Engine 6L-E.

If your Catalyst 4507R or Catalyst 4510R switch chassis has a Supervisor Engine 6-E (WS-X45-SUP6-E) or a Supervisor Engine 6L-E (WS-X45-SUP6L-E) installed in slot 2 and slot 1 is empty, you must install the blank line card (C4K-SLOT-CVR-E) in slot 1 rather than a blank faceplate (C4K-SLOT-CVR) . A blank faceplate covering the slot 1 opening does not direct sufficient airflow to adequately cool the Supervisor Engine 6-E or the Supervisor Engine 6L-E.


Catalyst 4510R Switch Specifications

Table A-4 lists the Catalyst 4510R switch specifications.

Table A-4 Catalyst 4510R Switch Specifications 

Item
Specification
Environmental
 

Temperature,
ambient operating
ambient nonoperating and storage


32 to 104°F (0 to 40°C)
-40 to 167°F (-40 to 75°C)

Humidity (RH), ambient (noncondensing): operating
nonoperating and storage


10 to 90%
5 to 95%

Altitude:
operating
nonoperating


-500 to 6500 ft (-150 to 2000 m)
-1000 to 30,000 ft (-300 to 9150 m)

Switching Components
 

Backplane

88 Gbps full duplex with Supervisor Engine V,
96 Gbps with Supervisor Engine V-10GE
8 Gbps Uplinks with Supervisor Engine V

20 Gbps Uplinks with Supervisor Engine V-10GE

Port density

340 maximum using a Supervisor Engine V and a WS-X4302-GB in the Flex-Slot

386 maximum using a Supervisor Engine V-10GE

Inline power

integrated support, 820 W per line card

Physical Characteristics
 

Dimensions (H x W x D)

24.35 x 17.31 x 12.50 in. (61.84 x 43.97 x 31.70 cm)

14 RU

Weight

Minimum weight: 51.5 lb (23.4 kg)
Maximum weight: 108 lb (49.8 kg)

Chassis and backplane: 45.5 lb (20.6 kg)
Fan tray: 6.0 lb (2.7 kg)

Airflow
 

Switch

Right to left

Power supply

Front to back

Power

PoE supplied

-48 VDC

Power to Modules and Fans

12 VDC

Power to backplane components

3.3 VDC

Redundancy
 

Supervisor engine

yes

Power supply

1 + 1



Note The blank line card (C4K-SLOT-CVR-E) must be installed when either of the following two situations occur:

If your Catalyst 4507R or Catalyst 4510R switch chassis has a Supervisor Engine 6-E (WS-X45-SUP6-E) or a Supervisor Engine 6L-E (WS-X45-SUP6L-E) installed in slot 1 and slot 2 is empty, you must install the blank line card (C4K-SLOT-CVR-E) in slot 2 rather than a blank faceplate (C4K-SLOT-CVR) . A blank faceplate covering the slot 2 opening does not direct sufficient airflow to adequately cool the Supervisor Engine 6-E or the Supervisor Engine 6L-E.

If your Catalyst 4507R or Catalyst 4510R switch chassis has a Supervisor Engine 6-E (WS-X45-SUP6-E) or a Supervisor Engine 6L-E (WS-X45-SUP6L-E) installed in slot 2 and slot 1 is empty, you must install the blank line card (C4K-SLOT-CVR-E) in slot 1 rather than a blank faceplate (C4K-SLOT-CVR) . A blank faceplate covering the slot 1 opening does not direct sufficient airflow to adequately cool the Supervisor Engine 6-E or the Supervisor Engine 6L-E.


Catalyst 4500 Series Power Supplies

Tables A-5 through A-12 list the specifications for the Catalyst 4500 series power supplies.


Note All Catalyst 4500 series switch AC-input power supplies require single-phase source AC. The source AC can be out of phase between multiple power supplies or multiple AC-power plugs on the same power supply because all AC power supply inputs are isolated. Each chassis power supply should have its own dedicated branch circuit: 15 A or 20 A for North America and circuits sized to local and national codes for International locations.


For more information about power management and planning, refer to the "Environmental Monitoring and Power Management" chapter in the Catalyst 4500 Series Switch Cisco IOS Software Configuration Guide version appropriate for your software.

Table A-5 1000 W AC-Input Power Supply Specifications 

Item
Specification

Minimum software requirement

Cisco IOS Release 12.1(12c)EW

Catalyst Operating System software version 7.4 (1)

Power over Ethernet

Not supported1

AC-input type

Autoranging input with power factor corrector

AC-input voltage

100 to 240 VAC (±10% for full range)

AC-input current

12 A @ 100 VAC, 5 A @ 240 VAC

Maximum KVA rating

1.32 KVA

AC-input frequency

50/60 Hz (nominal) (±3 Hz for full range)

Power supply output capacity

1000 W plus 40 W (fan)

Power supply output

12 V @ 83.4 A, 3.3V @12.2 A, 1667 W maximum

Output holdup time

20 ms minimum

Max heat dissipation

943 BTUs/hr

1 A Catalyst 4503 with a Catalyst 4500 series Supervisor Engine II-Plus TS and a 1000W power supply will be able to provide 158.4 W of Power over Ethernet to ports on the supervisor engine. Switching modules in other slots will not be able to provide PoE.


Table A-6 1300 W AC-Input Power Supply Specifications 

Item
Specification

Minimum software requirement

Cisco IOS Release 12.1(12c)EW

Catalyst Operating System software version 7.4 (1)

Power over Ethernet

Supported, up to 800 W
(211 Cisco phones in combined mode)

AC-input type

Autoranging input with power factor corrector

AC-input voltage

100 to 240 VAC (±10% for full range)

AC-input current

16 A @ 100 VAC, 7 A @ 240 VAC

AC-input frequency

50/60 Hz (nominal) (±3 Hz for full range)

Maximum KVA rating

1.76 KVA

Power supply output

1300 W maximum

1000 W+ 40 W redundant mode (Data)
1667 W maximum in combined mode (Data)

800 W maximum each in redundant mode (PoE)
1333 W maximum in combined mode (PoE)

Power supply output (AC supply)

12 V @ 84.7 A, 3.3 V @ 12.5 A (Data),
-50 V @ 16.7 A (PoE)

Max heat dissipation

1568 BTUs/hr

Output holdup time

20 ms minimum


Table A-7 1400 W AC-Input Power Supply Specifications 

Item
Specification

Minimum software requirement

Cisco IOS Release 12.2(18)EW

Catalyst Operating System software
version 8.3 (1)GLX

Power over Ethernet

Not supported1

AC-input type

Autoranging input with power factor corrector

AC-input voltage

100 to 240 VAC (±10% for full range)

AC-input current

16 A @ 100 VAC, 7 A @ 240 VAC

AC-input frequency

50/60 Hz (nominal) (±3 Hz for full range)

Maximum KVA rating

1.76 KVA

Power supply output

2473 W maximum

1360 W+ 40 W redundant mode (Data)

Power supply output (AC supply)

12 V @ 113.4 A, 3.3 V @ 12.2 A (Data)

Max heat dissipation

1048 BTUs/hr

Output holdup time

20 ms minimum

1 A Catalyst 4503 with a Catalyst 4500 series Supervisor Engine II-Plus TS and a 1400W AC power supply provides 158.4 W of PoE to ports on the supervisor engine. Switching modules in other slots will not be able to provide PoE.



Caution Do not mix the 1400 W DC power supply with any other power supply, even for a hot swap or other short-term emergency. Doing so can seriously damage your switch.

The 1400W DC Input power supply may be used with the Catalyst 4500 Series AC Power Shelf. Documentation for the Catalyst 4500 Series AC Power Shelf is at: http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/configuration/notes/78_15068.html

Table A-8 1400 W DC-Input Power Supply Specifications 

Item
Specification

Minimum software requirement

Cisco IOS Release 12.1(19)EW
Catalyst Operating System software version 7.5 (1)

Power over Ethernet

Supported, up to 7500 W minus power consumed for data
(240 Cisco phones in combined mode)

DC-input voltage

Data only: -48  to -60 VDC
Inline devices: -48  to -56 VDC

DC-input current

Data only: 31 A @ -60 VDC
Data and inline devices: 180 A maximum @ -48 VDC input

Note The input power is configurable in the CLI. The Cisco IOS command is power dc input. The Catalyst Operating Sysytem command is set power DC input. Configure the switch software to match the requirements of your switch. To learn how to calculate the DC input current for your system, refer to the "Calculating DC Input Current" section.

Input power
Current draw At -40.5 V (min voltage)
Current draw at -72 V (max voltage)
Max heat dissipation at 1866 W

1866 W (Data only)
46 A
25.9 A
5760 BTUs

179 A max @ 48 VDC

Maximum KVA rating

1.87 (data)
9.15 (data and voice)

Power supply output (DC supply)

Data: 12 V @120 A, 3.3 V @ 10 A
Inline devices: 140 A total maximum (35 A maximum each per 5 channels) @-48 to 60 VDC input

1367 W+ 40 W redundant mode (Data)
2267 W maximum in combined mode (Data)

7500 W maximum each in redundant mode (PoE)
7280 W maximum in combined mode (PoE)

DC input terminal block

Accepts FCI p/n YAV25L2TC14FX90 or equivalent, barrel-type lug terminals with 90-degree angle, two- hole tongue, which accommodates 1/0 AWG size copper wire. The connector tongue width is 0.82 in, the stud hole spacing is 5/8 in, and the hole size is 1/4 in.

Output holdup time

4 ms

Max heat dissipation

1591 BTUs/hr (data)
2905 BTUs/hr (data and voice)

Catalyst 4503-Specific Power Usage (data only)
 

Maximum draw

475 W

Maximum input

633 W

Current draw at -40.5 V (min voltage)
Current draw at -72 V (max voltage)

15.6 A
8.8 A

Max heat dissipation at 633 W

2160 BTUs

Catalyst 4506-Specific Power Usage (data only)
 

Maximum draw (data only)

850 W

Maximum input

1133 W

Current draw at -40.5 V (min voltage)
Current draw at -72 V (max voltage)

28 A
15.8 A

Max heat dissipation at 1133 W

3515 BTUs

Catalyst 4507R-Specific Power Usage (data only)
 

Maximum draw (data only)

1080 W

Max input is 1080 W / 0.75 =

1440 W

Current draw at -40.5 V (min voltage)

Current draw at -72 V (max voltage)

35.6 A

20 A

Max heat dissipation 1440 W

4910 BTUs


Table A-9 1400 W DC Triple-Input Power Supply Specifications 

Item
Specification

Minimum software requirement

Cisco IOS Release 12.2(25)EW

Power over Ethernet

Not supported

DC-input voltage

Domestic and international: -48  to -60 VDC

DC-input current

42.5 A maximum @ -48 VDC input

Input 1: 12.5 A at -48 to -60 VDC
Input 2: 15 A at -48 to -60 VDC
Input 3: 15 A at -48 to -60 VDC

Input power
Current draw At -40.5 V (min voltage)
Current draw at -72 V (max voltage)
Max heat dissipation at 1400 W

1772 W @ 1400 W output power
42.5 A
25 A
1269 BTUs

Maximum KVA rating

1.77 at 1400 W load

Power supply output (DC supply)

12 V@ 8 A minimum, 115.3 A maximum
3.3 V @ 1.2 A minimum, 12.5 A maximum

1360 W+ 40 W redundant mode
2450 W maximum in combined mode

DC input terminal block

Model: Cooper Bussmann Magnum. Accepts terminals with flat angle, one hole tongue, which accommodates 10 to 12 AWG size copper wire. The connector the barrier spacing is 0.378 in (9.6 mm), and the screw size is 8-32.

Output holdup time

8 ms

Max heat dissipation

1269 BTUs/hr

Catalyst 4503-Specific Power Usage (data only)

Two modules minimum required @ -40.5 VDC input

One 15A module minimum required @ -44 VDC input

Maximum draw

475 W

Maximum input

609 W total / # of modules = W per module

Current draw at -40.5 V (min voltage)
Current draw at -72 V (max voltage)

15 A total / # of modules = A per module
8.5 A total / # of modules = A per module

Max heat dissipation at 609 W

2078 BTUs

Catalyst 4506-Specific Power Usage (data only)

Two modules minimum required @ -44 VDC input

Three modules minimum required @ -40.5 VDC input

Maximum draw (data only)

850 W

Maximum input

1076 W total / # of modules = W per module

Current draw at -40.5 V (min voltage)
Current draw at -72 V (max voltage)

26.6 A total / # of modules = A per module
15 A total / # of modules = A per module

Max heat dissipation at 1076 W

3671 BTUs

Catalyst 4507R-Specific Power Usage (data only)

Three modules minimum required

Maximum draw (data only)

1080 W

Max input is 1080 W

1367 W total / # of modules = W per module

Current draw at -40.5 V (min voltage)

Current draw at -72 V (max voltage)

33.75 A total / # of modules = A per module

19 A total / # of modules = A per module

Max heat dissipation 1367 W

4665 BTUs


Table A-10 Input Modes

Input Mode
Input Number
Input Configuration
Maximum Total Output Power

1

1

1 x 12.5 A

386 W @ -40.5 VDC
412 W @ -44.0 VDC

2

2 OR 3

1 x 15 A

466 W @ -40.5 VDC
495 W @ -44.0 VDC

3

1, 2 OR 3

1 x 12.5 A and
1 x 15 A

845 W @ -40.5 VDC
908 W @ -44.0 VDC

4

2, 3

2 x 15 A

914 W @ -40.5 VDC
990 W @ -44.0 VDC

5

1, 2, 3

1 x 12.5 A and
2 x 15 A

1294 W @ -40.5 VDC
1400 W @ -44.0 VDC


Table A-11 Allowable Power with Two 1400 W DC Triple-Input Power Supplies in Combined Mode

PS1/PS2
1
2 or 3
1 and
(2 or 3)
2 and 3
1 and 2 and 3

1

824 W

907 W

1320 W

1400 W

1700 W

2 or 3

907 W

990 W

1400 W

1450 W

1750 W

1 and (2 or 3)

1320 W

1400 W

1700 W

1750 W

1900 W

2 and 3

1400 W

1450 W

1750 W

1820 W

2130 W

1 and 2 and 3

1700 W

1750 W

1900 W

2130 W

2450 W


Table A-12 2800 W AC-Input Power Supply Specifications

Item
Specification

Minimum software requirement

Cisco IOS Release 12.1(13)EW

Catalyst Operating System software
version 7.5 (1)

Power over Ethernet

Supported, up to 1400 W
(240 Cisco phones in combined mode)

AC-input type

Autoranging input with power factor corrector

AC-input voltage

200 to 240 VAC (±10% for full range)

AC-input current

16 A maximum at 200 VAC

AC-input frequency

50/60 Hz (nominal) (±3% for full range)

Maximum KVA rating

3.52 KVA

Power supply output

2800 W maximum

12 V @113.3 A, 3.3 V @12.1 A (Data)
-50 V @28 A (PoE)

1360 W+ 40 W redundant mode (Data)
2473 W maximum in combined mode (Data)

1400 W maximum each in redundant mode (PoE)
2333 W maximum in combined mode (PoE)

Max heat dissipation

2387 BTUs/hr.

Output holdup time

20 ms minimum


 

Table A-13 4200 W AC-Input Power Supply Specifications

Item
Specification

Minimum software requirement

Cisco IOS Release 12.2(25)EWA

Power over Ethernet

Supported, up to 4200 W

AC-input type

Autoranging input with power factor corrector

AC-input voltage

100 to 240 VAC (±10% for full range)

AC-input current

12 A maximum at 200 VAC

AC-input frequency

50/60 Hz (nominal) (±3% for full range)

Maximum KVA rating

5.25 KVA

Power supply output

4200 W maximum @ 230 VAC
12 V @ 115.3 A, 3.3 V @12.5 A (Data)
-50 V @ 77.1 A (PoE) with two inputs

2100 W maximum @ 230 VAC
12 V @115.3 A, 3.3 V @12.5 A (Data)
-50 V @ 38.5 A (PoE) with one input

2100 W maximum @ 120 VAC
12 V @115.3 A, 3.3 V @12.5 A (Data)
-50 V @ 38.0 A (PoE) with two inputs

1050 W maximum @ 120 VAC
12 V @ 55.9 A, 3.3 V @12.5 A (Data)
-50 V @ 14.6 A (PoE) with one input

Max heat dissipation

3583 BTUs/hr.

Output holdup time

20 ms minimum


 


Note The 4200 W AC power supply should not be used in mixed-voltage configurations. All the inputs in a chassis must be at the same voltage (110 VAC or 220 VAC).


Table A-14 shows the wattage output possible with the 4200W power supply in redundant mode. In redundant mode, both power supplies must have identical inputs and all inputs must be at the same voltage. If the input voltages are mismatched, choose the value matching the weaker of the two power supplies.

Table A-14 Redundant Mode Output

 
12V
3.3V
-50V
Total

110

660

40

700

1050

110+110 or 220

1360

40

1850

2100

220+220

1360

40

3700

4200


Table A-15 shows the maximum output wattage with the 4200 W power supply in combined mode.

Table A-15 Combined Mode Output

 
W @ 12 V
W @3.3 V
W @ -50 V
Maximum (W)

Both sides at 110

1200

40

1320

1870

110+110, other side 110

1800

40

2000

2730

Both sides at 110+110

2200

40

3100

3800

Both sides at 220

2200

40

3100

3800

220+220, other side 220

2200

40

4700

5500

Both sides at 220+220

2200

40

6200

7600