Release Notes for Catalyst 3650 Series Switch, Cisco IOS XE Release 3.3.xSE

Available Languages

Download Options

  • PDF     (369.4 KB)
    View with Adobe Reader on a variety of devices
Updated:November 3, 2014

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Table of Contents

Release Notes for the Catalyst 3650 Series Switch es, CiscoIOSXERelease3.3.xSE

Contents

Introduction

What’s New

What’s New in Cisco IOS XE Release 3.3.5SE

What’s New in Cisco IOS XE Release 3.3.4SE

What’s New in Cisco IOS XE Release 3.3.3SE

New Hardware Support

CPP-Related Commands

What’s New in Cisco IOS XE Release 3.3.2SE

What’s New in Cisco IOS XE Release 3.3.1SE

Supported Hardware

Catalyst 3850 Switch Models

Network Modules

Catalyst 3650 Switch Models

Optics Modules

Cisco Wireless LAN Controller Models

Access Points and Mobility Services Engine

Wired Web UI (Device Manager) System Requirements

Hardware Requirements

Software Requirements

Wireless Web UI Software Requirements

Finding the Software Version and Feature Set

Software Compatibility Matrix

Interoperability with Other Client Devices

Upgrading the Switch Software

Features

Important Notes

Limitations and Restrictions

Caveats

Cisco Bug Search Tool

Open Caveats

Resolved Caveats in Cisco IOS XE Release 3.3.5SE

Resolved Caveats in Cisco IOS XE Release 3.3.4SE

Resolved Caveats in Cisco IOS XE Release 3.3.3SE

Resolved Caveats in Cisco IOS XE Release 3.3.2SE

Resolved Caveats in Cisco IOS XE Release 3.3.1SE

Resolved Caveats in Cisco IOS XE Release 3.3.0SE

Documentation Updates

Catalyst 3650 Switch Getting Started Guide

Security Configuration Guides

System Management Configuration Guide, Cisco IOS XE Release 3SE

Troubleshooting

Related Documentation

Obtaining Documentation and Submitting a Service Request

Release Notes for the Catalyst 3650 Series Switches, Cisco IOS XE Release 3.3.xSE

First Published: October 10, 2013

Last Updated: January 30, 2015

 

OL-30563-04

This release note describes the features and caveats for the Cisco IOS XE 3.3.xSE software on the Catalyst 3650 series switch.

Unless otherwise noted, the terms switch and device refer to a standalone switch and to a switch stack.

Contents

Introduction

The Catalyst 3650 switches are the next generation of enterprise class stackable access layer switches that provide full convergence between wired and wireless networks on a single platform. This convergence is built on the resilience of new and improved 160-Gbps StackWise-160 and Cisco StackPower. Wired and wireless security and application visibility and control are natively built into the switch.

The Catalyst 3650 switches also support full IEEE 802.3 at Power over Ethernet Plus (PoE+), modular and field replaceable network modules, redundant fans, and power supplies. The Catalyst 3650 switches enhance productivity by enabling applications such as IP telephony, wireless, and video for a true borderless network experience.

The Cisco IOS XE software represents the continuing evolution of the preeminent Cisco IOS operating system. The Cisco IOS XE architecture and well-defined set of APIs extend the Cisco IOS software to improve portability across platforms and extensibility outside the Cisco IOS environment. The Cisco IOS XE software retains the same look and feel of the Cisco IOS software, while providing enhanced future-proofing and improved functionality.

For more information about the Cisco IOS XE software, see http://www.cisco.com/en/US/prod/collateral/iosswrel/ps9442/ps11192/ps11194/QA_C67-622903.html

What’s New

What’s New in Cisco IOS XE Release 3.3.5SE

  • Behavior change—When using PAP authentication, the MAC address of the client is presented in upper case characters as credential information to the AAA server. In previous releases, the MAC address was presented in lower case characters.

No features were added or enhanced for this release. For more information about updates in this release, see the “Caveats” section.

What’s New in Cisco IOS XE Release 3.3.4SE

No features were added or enhanced for this release. For more information about updates in this release, see the “Caveats” section.

What’s New in Cisco IOS XE Release 3.3.3SE

New Hardware Support

cpp [all | disable | system-default | traffic-type]

The cpp [ all | disable | system-default | traffic-type ] global configuration command for configuring Control Plane Policing (CPP) has been updated to include keywords for modifying CPP policer settings on CPU queues and for controlling the policer rate based on traffic types.

cpp [ all | disable | system-default | traffic-type [ traffic-type { disable }]]

 

all

(Optional) Enable policing on all CPU bound traffic.

disable

(Optional) Disable all CPU policing.

system-default

(Optional) Reset all CPU queues to system default policer rate values.

Use the show platform qos queue stats internal cpu policer privileged EXEC command to display the system default values.

traffic-type [ traffic-type { disable }]

(Optional) Set the CPU traffic type to police.

  • disable — Disable policing on the specified traffic type.

Traffic types:

  • broadcast — Police broadcast traffic.
  • dot1x — Police IEEE 802.1x traffic.
  • forus-packet — Police forus packet traffic. Forus (or for-us) packets are packets destined to the router.
  • icmp-redirect — Police Internet Control Message Protocol (ICMP) redirect traffic.
  • layer2-control — Police Layer-2 control traffic.
  • multicast-control — Police multicast control traffic.
  • multicast-data — Police multicast data traffic.
  • routing-control — Police routing control traffic.
  • snooping — Police snooping traffic.
  • software-forward — Police software forward traffic.
  • system-data — Police system data traffic such as learning cache, RPF failure, GOLD, NFL sample.
  • topology-control — Police STP and STP topology control traffic.
  • webauth { pps } — Police web authentication traffic.

– pps : The range is 100 pps to 13000 pps.

  • wireless-iapp — Police Cisco Inter Access Point Protocol (IAPP) traffic.
  • wireless-mgmt — Police wireless RFID, radio resource management (RRM), and probe management.
  • wireless-mobility — Police Control And Provisioning of Wireless Access Points (CAPWAP) mobility data and control traffic.

This example shows how to enable CPU queue policing on web authentication traffic at 1400 pps:

Switch(config)# cpp traffic-type webauth 1400
 

You can verify your setting by entering the show platform qos queue stats internal cpu policer privileged EXEC command. For information about this show command, see the “show platform qos queue stats internal cpu policer” section.

show platform qos queue stats internal cpu policer

The show platform qos queue stats internal cpu policer privileged EXEC command is a new command to display the configured Control Plane Policing (CPP) CPU queue and corresponding traffic TYPES.

 

Table 1 CPP CPU Queue Mapping in FED with Corresponding Traffic Types
CPU Queue
Traffic Type

WK_CPU_Q_L2_CONTROL

layer2-control

WK_CPU_Q_ROUTING_CONTROL

routing-control

WK_CPU_Q_MCAST_DATA

multicast-data

WK_CPU_Q_PROTO_SNOOPING

snooping

WK_CPU_Q_PUNT_WEBAUTH

webauth

WK_CPU_Q_SW_FORWARDING_Q

sw-fwd

WK_CPU_Q_WIRELESS_PRIO_1

capwap-control

WK_CPU_Q_WIRELESS_PRIO_3

wireless-iapp

WK_CPU_Q_WIRELESS_PRIO_4, WK_CPU_Q_WIRELESS_PRIO_5

wireless-misc

WK_CPU_Q_TOPOLOGY_CONTROL

topology-control

WK_CPU_Q_MCAST_END_STATION_SERVICE

multicast-snooping

WK_CPU_Q_LEARNING_CACHE_OVFL, WK_CPU_Q_EXCEPTION, WK_CPU_Q_CRYPTO_CONTROL, WK_CPU_Q_EGR_EXCEPTION, WK_CPU_Q_NFL_SAMPLED_DATA, WK_CPU_Q_SGT_CACHE_FULL, WK_CPU_Q_GOLD_PKT,
WK_CPU_Q_RPF_FAILED

system-data

WK_CPU_Q_ICMP_REDIRECT

icmp-redirect

WK_CPU_Q_DOT1X_AUTH

dot1x

WK_CPU_Q_BROADCAST

broadcast

WK_CPU_Q_FORUS_TRAFFIC

forus

The show platform qos queue stats internal cpu policer command output shows the CPP policer settings (such as traffic types and CPP rates) on the CPU queues.

Switch# sh platform qos queue stats internal cpu policer
 
For Asic 0
Queue Enabled Rate(default) Rate(set) Drop
-----------------------------------------------------------------------
DOT1X Auth No 1000 1000 0
L2 Control No 500 500 0
Forus traffic No 1000 1000 0
ICMP GEN Yes 200 200 0
Routing Control No 500 500 0
Forus Address resolution No 1000 1000 0
ICMP Redirect No 500 500 0
WLESS PRI-5 No 1000 1000 0
WLESS PRI-1 No 1000 1000 0
WLESS PRI-2 No 1000 1000 0
WLESS PRI-3 No 1000 1000 0
WLESS PRI-4 No 1000 1000 0
BROADCAST Yes 200 200 0
Learning cache ovfl Yes 100 100 0
Sw forwarding Yes 1000 1000 0
Topology Control No 13000 13000 0
Proto Snooping No 500 500 0
BFD Low Latency No 500 500 0
Transit Traffic Yes 500 500 0
RPF Failed Yes 100 100 0
MCAST END STATION Yes 2000 2000 0
LOGGING Yes 1000 1000 0
Punt Webauth No 1000 1000 0
Crypto Control Yes 100 100 0
Exception Yes 100 100 0
General Punt No 500 500 0
NFL SAMPLED DATA Yes 100 100 0
SGT Cache Full Yes 100 100 0
EGR Exception Yes 100 100 0
Show frwd No 1000 1000 0
MCAST Data Yes 500 500 0
Gold Pkt Yes 100 100 0

What’s New in Cisco IOS XE Release 3.3.2SE

No features were added or enhanced for this release.

What’s New in Cisco IOS XE Release 3.3.1SE

  • Support added for Cisco Aironet 3700 Series Access Points—The Cisco Aironet 3700 Series Access Points with the 802.11ac module is supported in this release. For more information about the AP, see http://www.cisco.com/en/US/products/ps13367/index.html.
  • For information about open and resolved caveats, see “Caveats” section.
  • HSRP version 2 support for IPv4 and IPv6—Improves management and troubleshooting of IP multicast addresses. Also addresses the restrictions in HSRP version 1, such as:

– Group numbers are restricted to the range from 0 to 255. HSRP version 2 expands the group number range from 0 to 4095.

– Multicast address 224.0.0.2 is used to send HSRP hello messages. This address can conflict with Cisco Group Management Protocol (CGMP) leave processing. HSRP version 2 uses the new IP multicast address 224.0.0.102 to send hello packets instead of the multicast address of 224.0.0.2.

Note HSRP is supported in the IP Base and IP Services feature sets. It is not supported in the LAN Base feature set.

Supported Hardware

Catalyst 3850 Switch Models

 

Table 2 Catalyst 3850 Switch Models

Switch Model
Cisco IOS Image
Description

WS-C3850-24T-L

LAN Base

Cisco Catalyst 3850 Stackable 24 10/100/1000 Ethernet ports, with 350-WAC power supply 1 RU, LAN Base feature set (StackPower cables must be purchased separately)

WS-C3850-48T-L

LAN Base

Cisco Catalyst 3850 Stackable 48 10/100/1000 Ethernet ports, with 350-WAC power supply 1 RU, LAN Base feature set (StackPower cables must be purchased separately)

WS-C3850-24P-L

LAN Base

Cisco Catalyst 3850 Stackable 24 10/100/1000 Ethernet PoE+ ports, with 715-WAC power supply 1 RU, LAN Base feature set (StackPower cables must be purchased separately)

WS-C3850-48P-L

LAN Base

Cisco Catalyst 3850 Stackable 48 10/100/1000 Ethernet PoE+ ports, with 715-WAC power supply 1 RU, LAN Base feature set (StackPower cables must be purchased separately)

WS-C3850-48F-L

LAN Base

Cisco Catalyst 3850 Stackable 48 10/100/1000 Ethernet PoE+ ports, with 1100-WAC power supply 1 RU, LAN Base feature set (StackPower cables must be purchased separately)

WS-C3850-24T-S

IP Base

Cisco Catalyst 3850 Stackable 24 10/100/1000 Ethernet ports, with 350-WAC power supply 1 RU, IP Base feature set

WS-C3850-48T-S

IP Base

Cisco Catalyst 3850 Stackable 48 10/100/1000 Ethernet ports, with 350-WAC power supply 1 RU, IP Base feature set

WS-C3850-24P-S

IP Base

Cisco Catalyst 3850 Stackable 24 10/100/1000 Ethernet PoE+ ports, with 715-WAC power supply 1 RU, IP Base feature set

WS-C3850-48P-S

IP Base

Cisco Catalyst 3850 Stackable 48 10/100/1000 Ethernet PoE+ ports, with 715-WAC power supply 1 RU, IP Base feature set

WS-C3850-48F-S

IP Base

Cisco Catalyst 3850 Stackable 48 10/100/1000 Ethernet PoE+ ports, with 1100-WAC power supply 1 RU, IP Base feature set

WS-C3850-24T-E

IP Services

Cisco Catalyst 3850 Stackable 24 10/100/1000 Ethernet ports, with 350-WAC power supply 1 RU, IP Services feature set

WS-C3850-24PW-S

IP Base

Cisco Catalyst 3850 24-port PoE IP Base with 5-access point license

WS-C3850-48PW-S

IP Base

Cisco Catalyst 3850 48-port PoE IP Base with 5-access point license

Catalyst 3850-12S-S

IP Base

12 SFP+ module slots, 1 network module slot, 350-W power supply

Catalyst 3850-24S-S

IP Base

24 SFP+ module slots, 1 network module slot, 350-W power supply

WS-C3850-48T-E

IP Services

Cisco Catalyst 3850 Stackable 48 10/100/1000 Ethernet ports, with 350-WAC power supply 1 RU, IP Services feature set

WS-C3850-24P-E

IP Services

Cisco Catalyst 3850 Stackable 24 10/100/1000 Ethernet PoE+ ports, with 715-WAC power supply 1 RU, IP Services feature set

WS-C3850-48P-E

IP Services

Cisco Catalyst 3850 Stackable 48 10/100/1000 Ethernet PoE+ ports, with 715-WAC power supply 1 RU, IP Services feature set

WS-C3850-48F-E

IP Services

Cisco Catalyst 3850 Stackable 48 10/100/1000 Ethernet PoE+ ports, with 1100-WAC power supply 1 RU, IP Services feature set

WS-3850-24U-E

IP Services

Cisco Catalyst 3850 Stackable 24 10/100/1000 Cisco UPOE ports,1 network module slot, 1100-W power supply

WS-3850-48U-E

IP Services

Cisco Catalyst 3850 Stackable 48 10/100/1000 Cisco UPOE ports,1 network module slot, 1100-W power supply

Catalyst 3850-12S-E

IP Services

12 SFP+ module slots, 1 network module slot, 350-W power supply

Catalyst 3850-24S-E

IP Services

24 SFP+ module slots, 1 network module slot, 350-W power supply

Network Modules

Table 3 lists the three optional uplink network modules with 1-Gigabit and 10-Gigabit slots. You should only operate the switch with either a network module or a blank module installed.

 

Table 3 Supported Network Modules

Network Module
Description

C3850-NM-4-1G

Four 1-Gigabit small form-factor pleadable (SFP) module slots. Any combination of standard SFP modules are supported. SFP+ modules are not supported.

C3850-NM-2-10G

Four SFP module slots:

  • Two slots (left side) support only 1-Gigabit SFP modules and two slots (right side) support either 1-Gigabit SFP or 10-Gigabit SFP+ modules.

Supported combinations of SFP and SFP+ modules:

  • Slots 1, 2, 3, and 4 populated with 1-Gigabit SFP modules.
  • Slots 1 and 2 populated with 1-Gigabit SFP modules and Slot 3 and 4 populated with 10-Gigabit SFP+ module.

C3850-NM-4-10G

Four 10-Gigabit slots or four 1-Gigabit slots.

Note The module is supported only on the 48-port models.

C3850-NM-BLANK

No uplink ports.

Catalyst 3650 Switch Models

 

Table 4 Catalyst 3650 Switch Models

Switch Model
Cisco IOS Image
Description

Catalyst 3650-24TS-L

LAN Base

Stackable 24 10/100/1000 Ethernet downlink ports, four 1-Gigabit SFP (small form-factor pluggable) uplink ports, 250-W power supply

Catalyst 3650-48TS-L

LAN Base

Stackable 48 10/100/1000 Ethernet downlink ports, four 1-Gigabit SFP uplink ports, 250-W power supply

Catalyst 3650-24PS-L

LAN Base

Stackable 24 10/100/1000 PoE+1 downlink ports, four 1-Gigabit SFP uplink ports, 640-W power supply

Catalyst 3650-48PS-L

LAN Base

Stackable 48 10/100/1000 PoE+ downlink ports, four 1-Gigabit SFP uplink ports, 640-W power supply

Catalyst 3650-48FS-L

LAN Base

Stackable 48 10/100/1000 Full PoE downlink ports, four 1-Gigabit SFP uplink ports, 1025-W power supply

Catalyst 3650-24TD-L

LAN Base

Stackable 24 10/100/1000 Ethernet downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 250-W power supply

Catalyst 3650-48TD-L

LAN Base

Stackable 48 10/100/1000 Ethernet downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 250-W power supply

Catalyst 3650-24PD-L

LAN Base

Stackable 24 10/100/1000 PoE+ downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 640-W power supply

Catalyst 3650-48PD-L

LAN Base

Stackable 48 10/100/1000 PoE+ downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 640-W power supply

Catalyst 3650-48FD-L

LAN Base

Stackable 48 10/100/1000 Full PoE downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 1025-W power supply

Catalyst 3650-48FQ-L

LAN Base

Stackable 48 10/100/1000 Full PoE downlink ports, four 10-Gigabit SFP+ uplink ports, 1025-W power supply

Catalyst 3650-48PQ-L

LAN Base

Stackable 48 10/100/1000 PoE+ downlink ports, four 10-Gigabit SFP+ uplink ports, 640-W power supply

Catalyst 3650-48TQ-L

LAN Base

Stackable 48 10/100/1000 Ethernet downlink ports, four 10-Gigabit SFP+ uplink ports, 250-W power supply

Catalyst 3650-24TS-S

IP Base

Stackable 24 10/100/1000 Ethernet downlink ports, four 1-Gigabit SFP uplink ports, 250-W power supply

Catalyst 3650-48TS-S

IP Base

Stackable 48 10/100/1000 Ethernet downlink ports, four 1-Gigabit SFP uplink ports, 250-W power supply

Catalyst 3650-24PS-S

IP Base

Stackable 24 10/100/1000 PoE+ downlink ports, four 1-Gigabit SFP uplink ports, 640-W power supply

Catalyst 3650-48PS-S

IP Base

Stackable 48 10/100/1000 PoE+ downlink ports, four 1-Gigabit SFP uplink ports, 640-W power supply

Catalyst 3650-48FS-S

IP Base

Stackable 48 10/100/1000 Full PoE downlink ports, four 1-Gigabit SFP uplink ports, 1025-W power supply

Catalyst 3650-24TD-S

IP Base

Stackable 24 10/100/1000 Ethernet downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 250-W power supply

Catalyst 3650-48TD-S

IP Base

Stackable 48 10/100/1000 Ethernet downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 250-W power supply

Catalyst 3650-24PD-S

IP Base

Stackable 24 10/100/1000 PoE+ downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 640-W power supply

Catalyst 3650-48PD-S

IP Base

Stackable 48 10/100/1000 PoE+ downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 640-W power supply

Catalyst 3650-48FD-S

IP Base

Stackable 48 10/100/1000 Full PoE downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 1025-W power supply

Catalyst 3650-48FQ-S

IP Base

Stackable 48 10/100/1000 Full PoE downlink ports, four 10-Gigabit SFP+ uplink ports, 1025-W power supply

Catalyst 3650-48PQ-S

IP Base

Stackable 48 10/100/1000 PoE+ downlink ports, four 10-Gigabit SFP+ uplink ports, 640-W power supply

Catalyst 3650-48TQ-S

IP Base

Stackable 48 10/100/1000 Ethernet downlink ports, four 10-Gigabit SFP+ uplink ports, 250-W power supply

Catalyst 3650-24TS-E

IP Services

Stackable 24 10/100/1000 Ethernet downlink ports, four 1-Gigabit SFP uplink ports, 250-W power supply

Catalyst 3650-48TS-E

IP Services

Stackable 48 10/100/1000 Ethernet downlink ports, four 1-Gigabit SFP uplink ports, 250-W power supply

Catalyst 3650-24PS-E

IP Services

Stackable 24 10/100/1000 PoE+ downlink ports, four 1-Gigabit SFP uplink ports, 640-W power supply

Catalyst 3650-48PS-E

IP Services

Stackable 48 10/100/1000 PoE+ downlink ports, four 1-Gigabit SFP uplink ports, 640-W power supply

Catalyst 3650-48FS-E

IP Services

Stackable 48 10/100/1000 Full PoE downlink ports, four 1-Gigabit SFP uplink ports, 1025-W power supply

Catalyst 3650-24TD-E

IP Services

Stackable 24 10/100/1000 Ethernet downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 250-W power supply

Catalyst 3650-48TD-E

IP Services

Stackable 48 10/100/1000 Ethernet downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 250-W power supply

Catalyst 3650-24PD-E

IP Services

Stackable 24 10/100/1000 PoE+ downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 640-W power supply

Catalyst 3650-48PD-E

IP Services

Stackable 48 10/100/1000 PoE+ downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 640-W power supply

Catalyst 3650-48FD-E

IP Services

Stackable 48 10/100/1000 Full PoE downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 1025-W power supply

Catalyst 3650-48FQ-E

IP Services

Stackable 48 10/100/1000 Full PoE downlink ports, four 10-Gigabit SFP+ uplink ports, 1025-W power supply

Catalyst 3650-48PQ-E

IP Services

Stackable 48 10/100/1000 PoE+ downlink ports, four 10-Gigabit SFP+ uplink ports, 640-W power supply

Catalyst 3650-48TQ-E

IP Services

Stackable 48 10/100/1000 Ethernet downlink ports, four 10-Gigabit SFP+ uplink ports, 250-W power supply

1.PoE+ = Power over Ethernet plus (provides up to 30 W per port).

Optics Modules

Catalyst switches support a wide range of optics. Because the list of supported optics is updated on a regular basis, consult the tables at this URL for the latest (SFP) compatibility information:

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html

Cisco Wireless LAN Controller Models

 

Table 5 Cisco WLC 5700 Models

Part Number
Description

AIR-CT5760-25-K9

Cisco 5760 Wireless Controller for up to 25 Cisco access points

AIR-CT5760-50-K9

Cisco 5760 Wireless Controller for up to 50 Cisco access points

AIR-CT5760-100-K9

Cisco 5760 Wireless Controller for up to 100 Cisco access points

AIR-CT5760-250-K9

Cisco 5760 Wireless Controller for up to 250 Cisco access points

AIR-CT5760-500-K9

Cisco 5760 Wireless Controller for up to 500 Cisco access points

AIR-CT5760-1K-K9

Cisco 5760 Wireless Controller for up to 1000 Cisco access points

AIR-CT5760-HA-K9

Cisco 5760 Series Wireless Controller for High Availability

Access Points and Mobility Services Engine

Table 6 lists the supported products of the Catalyst 3650 switch.

 

Table 6 Catalyst 3650 Switch Supported Products

Product
Platform Supported

Access Point

Cisco Aironet 1040, 1140, 1260, 1600, 2600, 3500, 3600, 3700

Mobility Services Engine

3355, Virtual Appliance

Table 7 lists the specific supported Cisco access points.

 

Table 7 Supported Access Points

Access Points

Cisco Aironet 1040 Series

AIR-AP1041N

AIR-AP1042N

AIR-LAP1041N

AIR-LAP1042N

Cisco Aironet 1140 Series

AIR-AP1141N

AIR-AP1142N

AIR-LAP1141N

AIR-LAP1142N

Cisco Aironet 1260 Series

AIR-LAP1261N

AIR-LAP1262N

AIR-AP1261N

AIR-AP1262N

Cisco Aironet 1600 Series

AIR-CAP1602E

AIR-CAP1602I

Cisco Aironet 2600 Series

AIR-CAP2602E

AIR-CAP2602I

Cisco Aironet 3500 Series

AIR-CAP3501E

AIR-CAP3501I

AIR-CAP3501P

AIR-CAP3502E

AIR-CAP3502I

AIR-CAP3502P

Cisco Aironet 3600 Series

AIR-CAP3602E

AIR-CAP3602I

Cisco Aironet 3700 Series

AIR-CAP3702I

AIR-CAP3702E

AIR-CAP3702P

Wired Web UI (Device Manager) System Requirements

Hardware Requirements

 

Table 8 Minimum Hardware Requirements

Processor Speed
DRAM
Number of Colors
Resolution
Font Size

233 MHz minimum2

512 MB3

256

1024 x 768

Small

2.We recommend 1 GHz.

3.We recommend 1 GB DRAM.

Software Requirements

  • Windows 2000, Windows 2003, Windows XP, Windows Vista, or Windows 7
  • With JavaScript enabled: Internet Explorer 6.0 and 7.0, or Firefox 26.0

Wireless Web UI Software Requirements

  • Operating Systems

– Windows XP

– Windows 7

– Mac OS X

  • Browsers

– Google Chrome

– Microsoft Internet Explorer

– Mozilla Firefox

Finding the Software Version and Feature Set

Table 9 shows the mapping of the Cisco IOS XE version number and the Cisco IOS version number.

 

Table 9 Cisco IOS XE to Cisco IOS Version Number Mapping

Cisco IOS XE Version
Cisco IOSd Version
Cisco Wireless Control Module Version
Access Point Version

03.03.05SE

15.1(0)EZ5

10.1.150.0

15.2(4)JB7

03.03.04SE

15.0(1)EZ4

10.1.140.0

15.2(4)JB6

03.03.03SE

15.0(1)EZ3

10.1.130.0

15.2(4)JB5h

03.03.02SE

15.0(1)EZ2

10.1.121.0

15.2(4)JB5

03.03.01SE

15.0(1)EZ1

10.1.110.0

15.2(4)JB2

03.03.00SE

15.0(1)EZ

10.1.100.0

15.2(4)JN

The package files for the Cisco IOS XE software are stored on the system board flash device (flash:).

You can use the show version privileged EXEC command to see the software version that is running on your switch.

Note Although the show version output always shows the software image running on the switch, the model name shown at the end of this display is the factory configuration and does not change if you upgrade the software license.

You can also use the dir filesystem : privileged EXEC command to see the directory names of other software images that you might have stored in flash memory.

Software Compatibility Matrix

Table 10 lists the software compatibility matrix.

 

Table 10 Software Compatibility Matrix
Catalyst 3650
Cisco 5700 WLC
Cisco 5508 or WiSM2
MSE
ISE
ACS
Cisco PI

03.03.05SE

03.03.04SE

03.03.03SE

03.03.05SE

03.03.04SE

03.03.03SE

7.6

7.6

7.5

7.6

7.6

7.5

1.2

1.2

5.2, 5.3

5.2, 5.3

2.1.2

2.1.2

03.03.02SE

03.03.01SE

03.03.00SE

03.03.02SE

03.03.01SE

03.03.00SE

7.64

7.55

7.6

7.5

1.2

5.2, 5.3

2.1.16

2.0

4.Cisco WLC Release 7.6 is not compatible with Cisco Prime Infrastructure 2.0.

5.Prime Infrastructure 2.0 enables you to manage Cisco WLC 7.5.102.0 with the features of Cisco WLC 7.4.110.0 and earlier releases. Prime Infrastructure 2.0 does not support any features of Cisco WLC 7.5.102.0 including the new AP platforms.

6.Prime Infrastructure 2.1.1 allows you to manage Cisco WLC Releases 7.5.102.0 and 7.6.x with the features of Cisco WLC 7.4.121.0 and earlier releases. Prime Infrastructure 2.1.1 does not support any features that are introduced in Cisco WLC Releases 7.5.102.0 and 7.6.x except the new access point platforms and the new mobility feature.

Interoperability with Other Client Devices

This section describes the interoperability of this version of the switch software release with other client devices.

Table 11 lists the client types on which the tests were conducted. The clients included laptops, handheld devices, phones, and printers.

 

Table 11 Client Types

Client Type and Name
Version
Laptop

Intel 4965

11.5.1.15 or 12.4.4.5, v13.4

Intel 5100/6300

v14.3.0.6

Intel 6205

v14.3.0.6

Dell 1395/1397

XP/Vista: 5.60.18.8 Win7: 5.30.21.0

Dell 1505/1510/Broadcom 4321MCAG/4322HM

5.60.18.8

Dell 1515 (Atheros)

8.0.0.239

Dell 1520/Broadcom 43224HMS

5.60.48.18

Dell 1530 (Broadcom BCM4359)

v5.100.235.12

Cisco CB21

v1.3.0.532

Atheros HB95

7.7.0.358

MacBook Pro (Broadcom)

5.10.91.26
Handheld Devices

Apple iPad

iOS 5.0.1

Apple iPad2

iOS 6.0.1

Apple iPad3

iOS 7.1.1(11D201)

Apple iPad Mini

iOS 7.1.1(11D201)

Samsung Galaxy Tab

Android 3.2

Intermec CK70

Windows Mobile 6.5 / 2.01.06.0355

Intermec CN50

Windows Mobile 6.1 / 2.01.06.0333

Symbol MC5590

Windows Mobile 6.5 / 3.00.0.0.051R

Symbol MC75

Windows Mobile 6.5 / 3.00.2.0.006R
Phones and Printers

Cisco 7921G

1.4.2.LOADS

Cisco 7925G

1.4.2.LOADS

Ascom i75

1.8.0

Spectralink 8030

119.081/131.030/132.030

Vocera B1000A

4.1.0.2817

Vocera B2000

4.0.0.345

Apple iPhone 5

iOS 7.1.1(11D201)

Apple iPhone 5s

iOS 7.1.1(11D201)

Apple iPhone 5c

iOS 7.1.1(11D201)

Apple iPhone 4

iOS 6.0.1

Apple iPhone 4S

iOS 6.0.1

Apple iPhone 5

iOS 6.0.1

Ascom i62

2.5.7

HTC Sensation

Android 2.3.3

Samsung Galaxy S II

Android 2.3.3

SpectraLink 8450

3.0.2.6098/5.0.0.8774

Samsung Galaxy Nexus

Android 4.0.2

Upgrading the Switch Software

For information about how to upgrade the switch software, see the System Management Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches) at the following URL:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3650/software/release/3se/system_management/configuration_guide/b_sm_3se_3650_cg.html

Features

The Catalyst 3650 switch supports three different feature sets:

  • LAN Base feature set—Provides basic Layer 2+ features, including access control lists (ACLs) and quality of service (QoS) and up to 4094 VLANs.
  • IP Base feature set—Provides Layer 2+ and basic Layer 3 features (enterprise-class intelligent services). These features include access control lists (ACLs), quality of service (QoS), ACLs, QoS, static routing, EIGRP stub routing, IP multicast routing, Routing Information Protocol (RIP), basic IPv6 management, the Open Shortest Path First (OSPF) Protocol, and support for wireless controller functionality.
  • IP Services feature set—Provides a richer set of enterprise-class intelligent services and full IPv6 support. It includes all IP Base features plus full Layer 3 routing (IP unicast routing, IP multicast routing, and fallback bridging). The IP Services feature set includes protocols such as the Enhanced Interior Gateway Routing Protocol (EIGRP), the Open Shortest Path First (OSPF) Protocol, and support for wireless controller functionality.

Note A separate access point count license is required to use the switch as a wireless controller.

For more information about the features, see the product data sheet at this URL:

http://www.cisco.com/en/US/products/ps13133/products_data_sheets_list.html

Important Notes

  • A switch stack containing a mix of Catalyst 3850 and Catalyst 3650 switches is not supported.
  • Although visible in the CLI, the following commands are not supported:

– switchport mode dot1qtunnel

– collect flow username

– authorize-lsc-ap (CSCui93659)

– show platform qos xxx (CSCug09112)

  • The following features are not supported in Cisco IOS XE Release 3.3.0SE:

– Outdoor Access Points

– Mesh, FlexConnect, and Office Extend Access Point deployment

– Wireless Guest Anchor Controller (The Catalyst 3850 switch can be configured as a foreign controller.)

– IPv6 Multicast Routing

– Resilient Ethernet Protocol

– Virtual Router Redundancy Protocol (VRRP)

– Private VLANs

– Device Sensor

– MVR (Multicast VLAN Registration)

– EnergyWise

– IPv6 routing - OSPFv3 Authentication

– Call Home

– DVMRP Tunneling

– Port Security on EtherChannel

– 802.1x Configurable username and password for MAB

– Government Certificates: Common Criteria & FIPS

– Link State Tracking (L2 Trunk Failover)

– Disable Per VLAN MAC Learning

– IEEE 802.1X-2010 with 802.1AE support

– IEEE 802.1AE MACsec (MKA & SAP)

– Command Switch Redundancy

– CNS Config Agent

– Dynamic Access Ports

– IPv6 Ready Logo phase II - Host

– IPv6 IKEv2 / IPSecv3

– OSPFv3 Graceful Restart (RFC 5187)

– Fallback bridging for non-IP traffic between VLANs

– DHCP snooping ASCII circuit ID

– Protocol Storm Protection

– 802.1x NEAT

– Per VLAN Policy & Per Port Policer

– Packet Based Storm Control

– Ingress/egress Shared Queues

– Trust Boundary Configuration

– Cisco Group Management Protocol (CGMP)

– Device classifier for ASP

– IPSLA Media Operation

– Mediatrace

– Passive Monitoring

– Performance Monitor (Phase 1)

– AAA: RADIUS over IPv6 transport

– AAA: TACACS over IPv6 Transport

– Auto QoS for Video endpoints

– EX SFP Support (GLC-EX-SMD)

– IPv6 Strict Host Mode Support

– IPv6 Static Route support on LAN Base images

– VACL Logging of access denied

– RFC5460 DHCPv6 Bulk Leasequery

– DHCPv6 Relay Source Configuration

– RFC 4293 IP-MIB (IPv6 only)

– RFC 4292 IP-FORWARD-MIB (IPv6 only)

– RFC4292/RFC4293 MIBs for IPv6 traffic

– IEEE 802.1Q Tunnel (Q-in-Q)

– Layer 2 Tunneling Protocol Enhancements

– UniDirectional Link Routing (UDLR)

– Pragmatic General Multicast (PGM)

– PVLAN, DAI, IPSG Interoperability

– Ingress Rate Limiting

– Ingress Strict Priority Queuing (Expedite)

– Weighted Random Early Detect (WRED)

– Improvements in QoS policing rates

– Fast SSID support for guest access WLANs

Limitations and Restrictions

  • You cannot configure NetFlow export using the Ethernet Management port (g0/0).
  • The switch does not support CDP bypass.
  • The maximum committed information rate (CIR) for voice traffic on a wireless port is 132 Mb/sec.
  • When configuring QoS queuing policy, the sum of the queuing buffer should not exceed 100%.
  • For QoS policies, only switched virtual interfaces (SVI) are supported for logical interfaces.
  • QoS policies are not supported for port-channel interfaces, tunnel interfaces, and other logical interfaces.
  • Restrictions for Cisco TrustSec:

– Cisco TrustSec can be configured only on physical interfaces, not on logical interfaces.

– Cisco TrustSec for IPv6 is not supported.

– Dynamic binding of IP-SGT is not supported for hosts on Layer 3 physical routed interfaces because the IP Device Tracking feature for Layer 3 physical interfaces is not supported.

– Cisco TrustSec cannot be configured on a pure bridging domain with IPSG feature enabled. You must either enable IP routing or disable the IPSG feature in the bridging domain.

– Cisco TrustSec on the switch supports up to 255 security group destination tags for enforcing security group ACLs.

Caveats

Cisco Bug Search Tool

The Bug Search Tool (BST), which is the online successor to Bug Toolkit, is designed to improve the effectiveness in network risk management and device troubleshooting. The BST allows partners and customers to search for software bugs based on product, release, and keyword, and aggregates key data such as bug details, product, and version. The tool has a provision to filter bugs based on credentials to provide external and internal bug views for the search input.

To view the details of a caveat listed in this document:

1. Access the BST (use your Cisco user ID and password) at https://tools.cisco.com/bugsearch/.

2. Enter the bug ID in the Search For: field.

Open Caveats

Use the BST to view the details of a caveat listed in this section. For more information about the BST, see the “Cisco Bug Search Tool” section.

 

Bug ID
Severity
Headline

CSCuj92028

2

WCCP Crash @edison_wccp_cam_write_event_handler

CSCup12631

2

WebGUI displays WSMA errors on some pages after TACACS authentication

CSCup49704

2

3850 FED Crash - Waiting for SPI channels FED_SPI_FLCD,FED_SPI_FAST

CSCuq48800

2

Low throughput due to UAPSD for Intel 7260 WiFi chipset

CSCur24801

2

DUT Fails to hit (SGT, DGT) in the absence of inline/SXP and IPDT entry

CSCur07909

3

Stack merge due to active and standby lost connectivity

Resolved Caveats in Cisco IOS XE Release 3.3.5SE

Use the BST to view the details of a caveat listed in this section. For more information about the BST, see the “Cisco Bug Search Tool” section.

 

Bug ID
Severity
Headline

CSCul46957

3

9M stack:Traceback@%OSAPI-5-MUTEX_UNLOCK_FAILED during switchover

CSCuo66526

2

wcm restart observed on 5760 with 3600 AP module

CSCup39353

2

IOSd reboots at @ ios_syncmgr_lock_pop_errmsg

CSCup86496

2

unicast ARP replies not destined to 3850 are forwarded to ARP module

CSCuq22460

3

COMMON-1-WDOG_CPUHOG: 1 fed: CPU usage time exceeded

CSCuq79546

1

IOSd reboots on 5760 running 3.3.4 at be_epm_redirect_cache_entry_get

CSCuq91035

3

5760 MIB support AP3700P AP model

Resolved Caveats in Cisco IOS XE Release 3.3.4SE

Use the BST to view the details of a caveat listed in this section. For more information about the BST, see the “Cisco Bug Search Tool” section.

 

Bug ID
Severity
Headline

CSCuc12774

3

FA1 routes unicast flood traffic back out FA1

CSCuc21859

2

Memory leak seen due to ESM ( Embedded Syslog manager )

CSCug51974

2

eEdge:Authen Failed page not thrown on Webauth with concurrent MAB login

CSCuh88726

3

SNMP High CPU when polling lldpXMedLocMediaPolicy

CSCui65914

2

DATACORRUPTION-SP-1-DATAINCONSISTENCY  copy error / 12.2(33)SRE6

CSCui69119

2

IPDT: rejected channel conf&Standby failed to boot up

CSCuj17317

3

XE: Certain snagless cables may press on the mode button causing reload

CSCul43158

2

Random mobile disassociation with PEM unknown timeout

CSCum45713

2

C2k_Scale: UUT crashed for scale session

CSCum66082

2

IRCM:Client able to pass traffic in CWA_RE

CSCum66129

2

3850 not forwarding multicast traffic in layer 2 when PIM enabled on SVI

CSCum91301

1

IPDT: Standby crashes due to host table corruption

CSCun39810

2

Iosd Crash due to snmpProxy

CSCun68485

2

Router ACL (RACL) on SVI in output direction applied to bridged traffic

CSCun78227

2

Incorrect temperature thresholds reported via SNMP

CSCun92928

2

Must reboot controller for HotSpot WLAN to advertise IW IE; AP crashes

CSCun97765

2

3850/03.03.02SE/Unable to disable IPDT

CSCuo14901

2

Crash/High CPU when enabling nbar for Flexible Netflow

CSCuo26294

2

WS-X45-SUP7-E crash with Process ffm: terminated abnormally

CSCuo47903

1

No CWA redirect for client in case it roamed in webauth-reqd state

CSCuo52701

2

slproc crash on 3850 switch stack

CSCuo55022

2

3850 hosts not getting DHCP addresses when Port-security is enabled

CSCuo63950

2

WCM crash on customer production network

CSCuo83872

5

Power Controller reports Short detected when non PoE device connected

CSCuo84770

2

3850/3.3.2SE/Not forwarding double dot1Q tagged packets

CSCuo86406

2

-D regulatory domain not supported with India (IN) country code in NGWC

CSCuo91792

2

IPDT:Wired stale entries learned via ARP not clearing out

CSCuo98789

2

ARP broadcast for vlan which is not SVI punted to CPU incase of Layer 2

CSCuo98816

2

Delete Payload not sent to previous AP when roaming to new AP

CSCup04121

2

Redirection loop when WCCP \"OUT\"  enabled on SVI on Cat-3850

CSCup09246

2

Catalyst3850 NetFlow export invalid packet

CSCup22590

2

Multiple Vulnerabilities in IOS/IOSd OpenSSL - June 2014

CSCup43034

2

WCM crash running 03.03.03

CSCup52101

2

EnergyWise Denial of Service vulnerabilty

CSCup53338

2

3850 IOSD crash | Signal=SIGSEGV(11) @ pm_port_data_from_swidb

CSCup63909

2

Roaming fails when Anchored phone roams back from foreign.

CSCup73590

2

WCM crash in Mobility code.

CSCup76790

2

FNF flow doesn't age out after 50 days

CSCup76944

2

HSRP dual Active at 3850 after port-channel down/up

CSCup91453

2

SNMP query cportQosStatsEntry with invalid ifindex prints hwidb is null

CSCup92246

2

NG3K: Default deny SGACL policy dropping management traffic

CSCup92808

2

No CWA redirect for client in case it roamed in webauth-reqd state

CSCuq09690

2

"no parameter-map" causes crash on 3.3.3 : auth_proxy_cache_redirect_url

CSCuq25195

2

Adjust AFD for every client and BSSID add/del.

CSCuq29232

2

No CWA redirect for client if it roamed in webauth-reqd state

CSCuq32016

2

Incorrect AFD client ssid association

CSCuq38516

2

iosd crash at emweb_http_process

Resolved Caveats in Cisco IOS XE Release 3.3.3SE

Use the BST to view the details of a caveat listed in this section. For more information about the BST, see the “Cisco Bug Search Tool” section.

 

Bug ID
Severity
Headline

CSCtk68692

3

kron-initiated 'write mem' locks nvram indefinitely

CSCug75425

3

4500-Sup7E NTP synchronized but clock behind 5-8 seconds

CSCug92629

4

show tech-support | inc Sunil includes names

CSCuh56465

3

Span: Multiple SPAN source ports on the same switch not monitored

CSCuh59075

2

member switch crashed with tracebacks due to MEMBLK CORRUPTION

CSCui94876

3

Serviceability enhancement needed to identify the AVL tree getting full

CSCuj31712

3

certain Vendor Sfp force ports to err-disable upon OIR

CSCui94876

3

Serviceability enhancement needed to identify the AVL tree getting full

CSCuj31712

3

certain Vendor Sfp force ports to err-disable upon OIR

CSCuj51019

2

Alpha: FFM crash on member switch

CSCuj52086

3

SSID name does not get updated with fast ssid change in access-request.

CSCul25757

2

CLI- port speed 10, 100, 1000 configuration fails on SFP interface

CSCul44461

2

System failed to bootup due to initializationfailure + IOSd crash

CSCul47224

2

Traceback @ ngwc_dot1x_control_rcv when dot1x authentication starts

CSCul66509

3

WLC 5760 GUI webpage error at first launch

CSCum09063

2

IOS system crash @ http_process

CSCum47451

2

3850 dACL is not applied on the stack member switch > 4

CSCum70737

2

3850 :: ACL definitions not consistent between stack master and members

CSCum81233

3

Config long vlan name cause tracback wcm_cs_debug_api + 780

CSCun10948

3

3850: Segfault with Process = ACL Logging Process

CSCun14712

3

5760 session timeout defaults and range are not shown properly in WebGUI

CSCun15859

2

Memory Leak ifm_send_ssid_update

CSCun21020

3

IP source guard causing packet drops

CSCun22639

3

ip source guard with mac-check prevents DHCP

CSCun26520

3

HA Not able to Sync on 5760

CSCun29753

1

Acl crash seen in darya mr1

CSCun32266

2

ACL label leak with large scale webauth

CSCun36781

2

3850 - Service config configuration causes boot loop

CSCun40246

3

Dot1x along with WEP fails authentication only during re-auth

CSCun44526

1

Katana 12K wireless clients application tuning for WVU

CSCun48219

2

Crash on 3850 stack with DHCP snooping

CSCun48721

2

3850 responds to GARP not destined to it

CSCun84970

3

3850 Every time diff wrap occurs, packet counter mismatch by 1

CSCun87876

2

multicast entries not synced completely to standby on IGMP leave

CSCun92474

3

EAPOL version should not always be V2

CSCun94333

3

5760 may send account stop after successful authentication with CWA

CSCun97822

3

Numeric VLAN name causing issues in wlan configuration with WebGUI.

CSCun98131

2

NG3K: Persistant snmp instance values for entity-mib

CSCuo01232

2

Clients not getting IP address at times when CPU utilization is high

CSCuo01236

2

CPU utilization is high with un-authenticated HTTPS redirected traffic

CSCuo14829

2

3850/03.03.02SE/Stuck Routing Control Q due to IPV6 MLD

CSCul31038

3

CSCul31038 NG3K: SNMP MAU-MIB support

CSCuo54486

3

AmurEdison:Clients on dropped APs cannot reconnect after switchover

Resolved Caveats in Cisco IOS XE Release 3.3.2SE

Use the BST to view the details of a caveat listed in this section. For more information about the BST, see the “Cisco Bug Search Tool” section.

 

Bug ID
Severity
Headline

CSCtq21722

1

SNMP crash forced due to an invalid memory block

CSCud17778

2

memory leak in middle buffers due to snmp traps

CSCui40588

2

GUI is not accesible after aaa authentication for http/s

CSCui75983

3

ingress policy match to wrong class-map after reboot

CSCui97487

2

3850: Reload of all member Switches cause Active SWitch to reload

CSCuj58616

2

Katana memory leak in IOSd - ppcp_to_ppm_policy

CSCuj81941

2

Katana-HA:PI template for 802.11a radio config pushed but failed to sync

CSCul21515

2

Client policing behaviour is unexpected for TCP traffic

CSCul26646

2

Scheduler data structure cleanup issue "process_watch_watched_message"

CSCul30304

2

Failed to allocate hardware resource(REP RI)

CSCul30792

2

SNMP memory leak when heavy polling is done continuously

CSCul31225

2

QoS:svi set policy not work

CSCul54414

2

Unable to configure anything after adding few SNMP communities/host

CSCul54484

2

Memory leak in eicored

CSCul66968

2

Crash after bringing up a port-channel configured with mode on

CSCul79858

2

Darya:SNMP pulling 3-4 days cause the switch crash

CSCul84467

2

C3850:Stack:Port-Channel:Active Mem Switch Power Shut cause Traffic Loss

CSCum11385

2

Amur: FED process crashed on the member switch

CSCum21662

2

Darya:SNMP pulling 3-4 days cause the switch crash

CSCum40660

2

3850 dot1x multi-host - client roaming between ports does not work

CSCum43727

2

DHCP snooping database not being created

CSCum59496

2

5760 reboots in openssl_dtls_server_setup

Resolved Caveats in Cisco IOS XE Release 3.3.1SE

Use the BST to view the details of a caveat listed in this section. For more information about the BST, see the “Cisco Bug Search Tool” section.

 

Bug ID
Severity
Headline

CSCsl45701

3

TACACS+ per VRF authen failing: Address already in use

CSCuc63146

2

Port-channel interface flap when changing vlan allowed list

CSCud08538

2

WNBU-ALPHA: WCM crash on 2M at pthread_mutex_lock

CSCue49527

2

WLC should delete the session ID from PMK cache when client is removed

CSCug18767

6

LWA Captive Portal Bypass + Consent logout popup blocker support

CSCui36499

3

%PLATFORM_THERMAL-1-FRU_FAN_FAILURE:

CSCui69999

2

3850 crashes when switches in the stack have different images

CSCuj21417

2

AID leak causing Stale Client entries on WLC

CSCuj34025

2

HCA: AUP PDF page does not display in PDF format

CSCuj48089

2

3850 Stuck Broadcast Queue

CSCuj51372

2

MacLearning not occuring for a group of 24 ports on 3850

CSCuj57007

2

HCA: DHCPACK with no DHCPOPT_LEASE_TIME option field should trigger IPDT

CSCuj78610

2

High cpu issue dueto process Auth-proxy HTTP, Web Auth client issue

CSCul03186

2

HCA: HotSpot Error intermittently on iPad

CSCul06456

3

Bowdoin cust requirement: need snmp OID support to create local net user

CSCul06619

2

Stale IPDT entries causing client to be stuck in DHCP reqd state.

CSCul13504

3

web-auth logout pop-up window disable support

CSCul27659

3

DHCP NAK sent as broadcast is causing issues in Guest (F-A) scenarios

CSCul27717

2

APs disassociate in large scale setup when debug commands are executed

CSCul30051

2

Clients failing auth (psk/dot1x) due to uncreated dot1x interface for AP

Resolved Caveats in Cisco IOS XE Release 3.3.0SE

Use the BST to view the details of a caveat listed in this section. For more information about the BST, see the “Cisco Bug Search Tool” section.

 

Bug ID
Severity
Headline

CSCua75283

2

%DATACORRUPTION-1-DATAINCONSISTENCY and router hang with Codenomicon

CSCuc12774

3

FA1 routes unicast flood traffic back out FA1

CSCuc95293

1

All external communications cease

CSCud11467

3

Apply in and out PV HQOS policy/remove input policy/output policy fails

CSCud11552

3

Change int BW/speed when HQOS policy is attached causes policy to detach

CSCud54501

3

'show policy-map interface wireless ap' counters not updating

CSCud54725

3

policy stops working after remove class from policy-map attached to intf

CSCud55333

3

port-shape not reaching shape rate for 10gig port

CSCud56426

2

webauth does not unbind logout ACLs in use once virtual ip is removed

CSCud60008

3

with Priority+policer change on fly cause some policy to be uninstalle

CSCud60070

3

”increase range for “”prio+ abs rate”” from 2G to 10G”

CSCud62982

3

PV with same child policy don’t work properly on some uplink ports

CSCud63110

3

Table-map set still present after remove agg-policiing with table child

CSCud63823

3

Delete share policy on 4x10G uplink port share policy on 1G stop work

CSCud65034

3

classification not work under parent user-defined class

CSCud71747

3

SNMP Issues in MO MC client tables

CSCud72626

2

per vlan policy failed to be removed with certain sequence

CSCuf86171

2

DHCP snooping database agent fails to start

CSCuf93185

3

Newton Uplink 1-G only port up even force change state to admin down

CSCug38523

2

WebUI: home screen takes 10-15 sec to load

CSCug41165

3

Copy-paste of wireless config drops characters from beginning of line

CSCug58178

3

wireless multicast traffic not sent to vlan defined by AP group on 3850

CSCuh20848

3

3850 shows %IPC-5-WATERMARK log messages repeatedly

CSCui59004

2

iosd crash while configuring no ntp server

Documentation Updates

Catalyst 3650 Switch Getting Started Guide

  • The “Managing the Switch” section erroneously includes information about Cisco Network Assistant (CNA). CNA is not supported in this release.

System Management Configuration Guide, Cisco IOS XE Release 3SE

  • The name of the Cisco IOS software bundle and the names of the Cisco IOS package files are incorrect. The correct filenames are:

– cat3k_caa-universalk9.SPA.03.03.00.SE.150-1.EZ.bin

– cat3k_caa-base.SPA.03.03.00SE.pkg

– cat3k_caa-drivers.SPA.03.03.00SE.pkg

– cat3k_caa-infra.SPA.03.03.00SE.pkg

– cat3k_caa-iosd-universalk9.SPA.150-1.EZ.pkg

– cat3k_caa-platform.SPA.03.03.00SE.pkg

– cat3k_caa-wcm.SPA.10.1.100.0.pkg

Troubleshooting

For the most up-to-date, detailed troubleshooting information, see the Cisco TAC website at this URL:

http://www.cisco.com/en/US/support/index.html

Choose Product Support > Switches. Then choose your product and click Troubleshoot and Alerts to find information for the problem that you are experiencing.

Related Documentation

  • Catalyst 3650 switch documentation at this URL:

http://www.cisco.com/go/cat3650_docs

  • Error Message Decoder at this URL:

https://www.cisco.com/cgi-bin/Support/Errordecoder/index.cgi

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html

Subscribe to the What’s New in Cisco Product Documentation, which lists all new and revised Cisco Technical documentation, as an RSS feed and deliver content directly to your desktop using a read application. The RSS feeds are a free service.

 

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

© 2013-2015 Cisco Systems, Inc. All rights reserved.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products