Release Notes for Catalyst 3650 Series Switch, Cisco IOS XE Release 3.7.xE

Available Languages

Download Options

  • PDF     (368.3 KB)
    View with Adobe Reader on a variety of devices
Updated:June 5, 2017

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Release Notes for Catalyst 3650 Series Switch, Cisco IOS XE Release 3.7.xE

Table of Contents

Release Notes for Catalyst 3650 Series Switch, Cisco IOS XE Release 3.7.xE

Contents

Introduction

Revision History

New Features

What’s New in Cisco IOS XE Release 3.7.5E

What’s New in Cisco IOS XE Release 3.7.4E

What’s New in Cisco IOS XE Release 3.7.3E

What’s New in Cisco IOS XE Release 3.7.2E

What’s New in Cisco IOS XE Release 3.7.1E

What’s New in Cisco IOS XE Release 3.7.0E

Supported Hardware

Catalyst 3850 Switch Models

Network Modules

Catalyst 3650 Switch Models

Optics Modules

Cisco Wireless LAN Controller Models

Access Points and Mobility Services Engine

Compatibility Matrix

OpenFlow Version and Cisco IOS Release Support

Wired Web UI (Device Manager) System Requirements

Hardware Requirements

Software Requirements

Wireless Web UI Software Requirements

Finding the Software Version and Feature Set

Upgrading the Switch Software

Important Upgrade Note

Features

Interoperability with Other Client Devices

Important Notes

Scaling Guidelines

Limitations and Restrictions

Caveats

Cisco Bug Search Tool

Open Caveats

Resolved Caveats in Cisco IOS XE Release 3.7.5E

Resolved Caveats in Cisco IOS XE Release 3.7.4E

Resolved Caveats in Cisco IOS XE Release 3.7.3E

Resolved Caveats in Cisco IOS XE Release 3.7.2E

Resolved Caveats in Cisco IOS XE Release 3.7.1E

Resolved Caveats in Cisco IOS XE Release 3.7.0E

Troubleshooting

Related Documentation

Obtaining Documentation and Submitting a Service Request

Release Notes for Catalyst 3650 Series Switch, Cisco IOS XE Release 3.7.xE

First Published: December 10, 2014

Last Updated: Feb 16, 2017

This release note gives an overview of the features for the Cisco IOS XE 3.7.xE software on the Catalyst 3650 series switch.

Unless otherwise noted, the terms switch and device refer to a standalone switch and to a switch stack.

Introduction

The Catalyst 3650 switches are the next generation of enterprise class stackable access layer switches that provide full convergence between wired and wireless networks on a single platform. This convergence is built on the resilience of new and improved 160-Gbps StackWise-160. Wired and wireless security and application visibility and control are natively built into the switch.

The Catalyst 3650 switches also support full IEEE 802.3 at Power over Ethernet Plus (PoE+), and offer modular and field replaceable redundant fans and power supplies. The Catalyst 3650 switches enhance productivity by enabling applications such as IP telephony, wireless, and video for a true borderless network experience.

The Cisco IOS XE software represents the continuing evolution of the preeminent Cisco IOS operating system. The Cisco IOS XE architecture and well-defined set of APIs extend the Cisco IOS software to improve portability across platforms and extensibility outside the Cisco IOS environment. The Cisco IOS XE software retains the same look and feel of the Cisco IOS software, while providing enhanced future-proofing and improved functionality.

For more information about the Cisco IOS XE software, see http://www.cisco.com/en/US/prod/collateral/iosswrel/ps9442/ps11192/ps11194/QA_C67-622903.html

Revision History

Table 1 Revision History
Modification Date
Modification Details

April 27, 2017

– Added: CSCus83638

New Features

What’s New in Cisco IOS XE Release 3.7.5E

There are no new features in this release.

What’s New in Cisco IOS XE Release 3.7.4E

 

Feature Name
Description

Support for –B Domain

The FCC (USA) rule making on 5 GHz released on April 1, 2014 (FCC 14-30 Report and Order) goes into effect for products that are sold or shipped on or after June 2, 2016. Cisco APs and Cisco WLCs will comply with the new rules by supporting the new regulatory domain (– for the US and will create new AP SKUs that are certified under the new rules. Examples of new rules include new 5-GHz band channels permitted for outdoor use, and transmission (Tx) power level increased to 1W for indoor, outdoor, and point-to-point transmissions.

Note Cisco APs and Cisco WLCs that are in the –A domain category can continue to operate and even coexist with –B domain devices without any issues.

We recommend that you upgrade Cisco APs and Cisco WLCs to the appropriate software release that supports –B domain.

–B Domain Compliant Cisco APs starting with Cisco IOS XE Release 3.7.4E are: Cisco Aironet 700, 700W, 1040, 1140, 1260, 1530, 1570, 1600, 1700, 2600, 2700, 3500, 3600, 3700.

What’s New in Cisco IOS XE Release 3.7.3E

 

Feature Name
Description

Enhancement to Web-auth configuration

Commands under global parameter-map to enable non SVI and VRF aware Web-auth configuration.

(LAN Base, IP Base and IP Services/Enterprise Services)

Mobility Controller managing Mobility Agent (MCMA)

The Mobility Controller managing Mobility Agent feature allows you to push the wireless and common configurations from the MC to the MAs.

(IP Base, IP Services/Enterprise Services)

OpenFlow 1.0 and OpenFlow 1.3

The OpenFlow feature defines a flow-based forwarding infrastructure (L2-L4 Ethernet switch model) and a standardized application programmatic interface to allow traffic flows on a device to be added or removed. OpenFlow allows a controller to direct the forwarding functions of a switch through a secure channel.

(LAN Base, IP Base, IP Services)

Support is added for these access points:

What’s New in Cisco IOS XE Release 3.7.2E

  • LACP Rate Fast—Support for the new lacp rate command, to set the rate at which Link Aggregation Control Packets (LACP) packets are sent to LACP-supported interfaces.
  • GRE tunneled packets switched on hardware—Support for forwarding GRE tunneled packets on the switch hardware.

What’s New in Cisco IOS XE Release 3.7.1E

  • New parameter call-station-id added to the wireless security dot1x radius mac-authentication command. The call-station-id parameter configures Call Station ID type for MAC authentication.
  • SFP BiDirectional (BiDi) Optics—SFP BiDirectional (BiDi) optical transceivers are used to transmit and receive optical signals through only one single fiber. These make use of single strand of SMF. The deployment of BiDi optical transceivers instantly doubles the bandwidth capacity of the existing optical fiber infrastructure.
  • Enhancement to port security configuration—Specify a MAC address that is forbidden by port security on all interfaces.
  • Support for Media Access Control Security (MACsec). The switch supports 802.1AE encryption with MACsec Key Agreement (MKA) on downlink ports for encryption between the switch and host devices.
  • Increased scale on Catalyst 3650 Switches to support up to 50 access points. Previously, support was up to 25 access points.

What’s New in Cisco IOS XE Release 3.7.0E

– Cisco Aironet 1700 Series Access Point

– Cisco Aironet 1570 Series Access Point (supported only in Local mode)

  • VLAN tagging is supported on Cisco Aironet 700W Series Access Points
  • mDNS Service Discovery Gateway Phase 3—The Service Discovery Gateway feature enables multicast Domain Name System (mDNS) to operate across Layer 3 (L3) boundaries. In this phase, features such as de-congestion of incoming mDNS traffic, redistribution of service withdrawal messages, a filter criterion for learning services available on a specific interface, and the periodic browsing of services on specific interfaces are introduced.
  • AVC top ‘N’ users per application—This feature enables you to know network usage information on a per user basis within an application. This feature is enabled by default and is available if AVC is enabled.
  • AN Infra—Autonomic networking makes network devices intelligent by introducing self-management concepts that simplify network management for the network operator.
  • CDP Bypass—The sessions are established in single and multi-host modes for IP Phones. However, if voice VLAN and 802.1x on an interface port is enabled, then the CDP Bypass is enabled when the host mode is set to single or multi host mode.

Note By default the host mode is set to single mode in <legacy> mode and multi-authentication in the edge mode.

Use the following commands to configure CDP bypass:

Switch> enable

Switch# configure terminal

Switch(config)# interface <interface-id>

Switch(config-if)# switchport mode access

Switch(config-if)# switchport voice vlan <vlan-id>

Switch(config-if)# authentication port-control auto

Switch(config-if)# authentication host-mode single | multi-host

Switch(config-if)# dot1x pae authenticator

 

  • VRRPv3 for IPv4 and IPv6—Enables a group of devices to form a single virtual device, to eliminate the single point of failure, which is inherent to a static default routed environment.
  • WebAuth sleeping client—Allows successfully authenticated devices to stay logged in for a configured period without reauthentication.

The following CLI is added under the webauth parameter map:

sleeping-client timeout timeout-in-minutes

Restrictions:

– There is one-to-one mapping between device MAC and username/password. Once an entry is added to sleeping-client cache, the device/user gets policies for the user stored in the cache. Therefore, any other user using the device also gets the same policies as the user stored in the sleeping-client cache. The user can force normal authentication by logging out. To do that, the user must explicitly enter the following URL:

http[s]://<Virtual IP/Virtual Host>/logout.html
 

– Mobility is not supported. If the client roams from one controller to another, the client undergoes normal authentication on the foreign controller.

  • Regulatory domains for India (–D), Indonesia (–F), Brazil (–Z), Honk Kong (–S) are supported.
  • New Flexible NetFlow Collect parameters:

– collect wireless afd drop bytes —Collects the fields for wireless approximate fair drop (AFD) drop bytes

– collect wireless afd accept bytes —Collects the fields for AFD accept bytes

  • New CLI is added to view AFD statistics information:

Switch# show platform qos wireless stats ssid { ssid-value | all } client all

This CLI lists client MAC address, WLAN ID, BSSID, accept byte, and drop byte details.

  • New CLI is added to check whether an access point model is supported or not:

Switch# show ap is-supported ap-model-part-number

  • AutoQoS is supported for wireless.
  • MC managing MA is supported.
  • Private VLAN support is introduced.
  • AutoQoS Compact: This feature hides the auto-QoS-generated commands from the running configuration.
  • Netflow IPv6 Exporter/IPv6 Extended Host Mode: This feature enables FNF Export over IPv6.
  • MACSec Encryption: Support for CTS (Cisco Trusted Security), which uses MACSec and SAP for securing links between Cisco Catalyst switches. It uses either 802.1x protocol or manual configuration for authentication and authorization between the peers, followed by the Cisco proprietary protocol SAP (Security Association Protocol) for key agreement to encrypt and decrypt traffic.
  • IPv6 Source Guard: IPv6 source guard is an interface feature between the populated binding table and data traffic filtering. This feature enables the device to deny traffic when it is originated from an address that is not stored in the binding table. IPv6 source guard does not inspect ND or DHCP packets; rather, it works in conjunction with IPv6 neighbor discovery (ND) inspection or IPv6 address glean, both of which detect existing addresses on the link and store them into the binding table. IPv6 source guard is an interface between the populated binding table and data traffic filtering, and the binding table must be populated with IPv6 prefixes for IPv6 source guard to work.
  • IPv6 Prefix Guard: The IPv6 Prefix Guard feature works within the IPv6 Source Guard feature, enabling the device to deny traffic originated from non-topologically correct addresses. IPv6 prefix guard is often used when IPv6 prefixes are delegated to devices (for example, home gateways) using DHCP prefix delegation. The feature discovers ranges of addresses assigned to the link and blocks any traffic sourced with an address outside this range.
  • IPv6 Destination Guard: The IPv6 Destination Guard feature works with IPv6 neighbor discovery to ensure that the device performs address resolution only for those addresses that are known to be active on the link. It relies on the address glean functionality to populate all destinations active on the link into the binding table and then blocks resolutions before they happen when the destination is not found in the binding table.
  • IPv6 First Hop Security support on Etherchannels: The IPv6 FHS policies can be attached to EtherChannel interfaces (Port Channels).
  • IPv6 ACL Wild Card Masking: Support for IPv6 wild card masking when specifying the Layer 3 address of a IPv6 ACL entry.
  • VLAN name extension: Maximum characters allowed for a VLAN name has been increased from 32 to 128.
  • LDAP source interface and VRF support: Allows you to configure a dedicated LDAP source interface IP address and virtual routing and forwarding (VRF).
  • VRF aware DHCPv6 Server/Relay for Prefix Delegation: Ensures that the DHCPv6 server and relay involved in delegating prefixes are VRF aware.
  • Webauth Sleeping Client (Webauth remember me): Allows successfully authenticated devices to stay logged in for a configured period without re-authentication.
  • VLAN RADIUS Attributes in Access Requests
  • Enhances the security for access switches with the use of VLAN RADIUS attributes (VLAN name and ID) in the access requests and with an extended VLAN name length of 128 characters.
  • Copy Aware VRF: Enables copying of files to and from a VRF via the copy command.
  • CWDM SFP+ 10-Gigabit optics are supported.

Supported Hardware

Catalyst 3850 Switch Models

 

Table 2 Catalyst 3850 Switch Models

Switch Model
Cisco IOS Image
Description

WS-C3850-24T-L

LAN Base

Stackable 24 10/100/1000 Ethernet ports, 1 network module slot, 350 W power supply

WS-C3850-48T-L

LAN Base

Stackable 48 10/100/1000 Ethernet ports, 1 network module slot, 350 W power supply

WS-C3850-24P-L

LAN Base

Stackable 24 10/100/1000 PoE+ ports, 1 network module slot, 715 W power supply

WS-C3850-48P-L

LAN Base

Stackable 48 10/100/1000 PoE+ ports, 1 network module slot, 715 W power supply

WS-C3850-48F-L

LAN Base

Stackable 48 10/100/1000 PoE+ ports, 1 network module slot, 1100 W power supply

WS-C3850-24U-L

LAN Base

Stackable 24 10/100/1000 Cisco UPOE ports, 1 network module slot, 1100 W power supply

WS-C3850-48U-L

LAN Base

Stackable 48 10/100/1000 Cisco UPOE ports, 1 network module slot, 1100 W power supply

WS-C3850-12X48U-L

LAN Base

Stackable 12 100M/1G/2.5G/5G/10G and 36 1G UPoE ports, 1 network module slot, 1100 W power supply

WS-C3850-24XU-L

LAN Base

Stackable 24 100M/1G/2.5G/5G/10G UPoE ports, 1 network module slot, 1100-W power supply

WS-C3850-24T-S

IP Base

Stackable 24 10/100/1000 Ethernet ports, 1 network module slot, 350 W power supply

WS-C3850-48T-S

IP Base

Stackable 48 10/100/1000 Ethernet ports, 1 network module slot, 350 W power supply

WS-C3850-24P-S

IP Base

Stackable 24 10/100/1000 PoE+ ports, 1 network module slot, 715 W power supply

WS-C3850-48P-S

IP Base

Stackable 48 10/100/1000 PoE+ ports, 1 network module slot, 715 W power supply

WS-C3850-48F-S

IP Base

Stackable 48 10/100/1000 PoE+ ports, 1 network module slot, 1100 W power supply

WS-C3850-24U-S

IP Base

Stackable 24 10/100/1000 Cisco UPOE ports, 1 network module slot, 1100 W power supply

WS-C3850-48U-S

IP Base

Stackable 48 10/100/1000 Cisco UPOE ports, 1 network module slot, 1100 W power supply

WS-C3850-24PW-S

IP Base

Stackable, 24-port PoE IP Base with 5-access point license

WS-C3850-48PW-S

IP Base

Stackable, 48-port PoE IP Base with 5-access point license

WS-C3850-12S-S

IP Base

Stackable 12 SFP module slots, 1 network module slot, 350-W power supply

WS-C3850-24S-S

IP Base

Stackable 24 SFP module slots, 1 network module slot, 350-W power supply

WS-C3850-12XS-S

IP Base

Stackable, 12-port SFP+ transceiver, 1 network module slot, support for up to 10 G SFP+, 350 W power supply

WS-C3850-16XS-S

IP Base

Stackable, 16-port SFP+ transceiver, 1 network module slot, support for up to 10 G SFP+, 350 W power supply.

16 ports are available when the C3850-NM-4-10G network module is plugged into the WS-C3850-12XS-S switch.

WS-C3850-24XS-S

IP Base

Stackable, 24-port SFP+ transceiver, 1 network module slot, support for up to 10 G SFP+, 715 W power supply.

WS-C3850-32XS-S

IP Base

Stackable, 32-port SFP+ transceiver, 1 network module slot, support for up to 10 G SFP+, 715 W power supply.

32 ports are available when the C3850-NM-8-10G network module is plugged into the WS-C3850-24XS-S switch.

WS-C3850-48XS-S

IP Base

Stackable, with SFP+ transceivers, 48 ports that support up to 10 G, and 4 ports that support up to 40 G. 750 W power supply.

WS-C3850-48XS-F-S

IP Base

Stackable, with SFP+ transceivers, 48 ports that support up to 10 G, and 4 ports that support up to 40 G. 750 W power supply.

WS-C3850-12X48U-S

IP Base

Stackable 12 100M/1G/2.5G/5G/10G and 36 1 G UPoE ports, 1 network module slot, 1100 W power supply.

WS-C3850-24XU-S

IP Base

Stackable 24 100M/1G/2.5G/5G/10G UPoE ports, 1 network module slot, 1100-W power supply

WS-C3850-24T-E

IP Services

Stackable 24 10/100/1000 Ethernet ports, with 350-WAC power supply

WS-C3850-48T-E

IP Services

Stackable 48 10/100/1000 Ethernet ports, with 350-WAC power supply

WS-C3850-24P-E

IP Services

Stackable 24 10/100/1000 Ethernet PoE+ ports, with 715-WAC power supply

WS-C3850-48P-E

IP Services

Stackable 48 10/100/1000 Ethernet PoE+ ports, with 715-WAC power supply

WS-C3850-48F-E

IP Services

Stackable 48 10/100/1000 Ethernet PoE+ ports, with 1100-WAC power supply

WS-C3850-24U-E

IP Services

Stackable 24 10/100/1000 Cisco UPOE ports,1 network module slot, 1100-W power supply

WS-C3850-48U-E

IP Services

Stackable 48 10/100/1000 Cisco UPOE ports,1 network module slot, 1100-W power supply

WS-C3850-12S-E

IP Services

Stackable, 2 SFP module slots, 1 network module slot, 350-W power supply

WS-C3850-24S-E

IP Services

Stackable, 24 SFP module slots, 1 network module slot, 350-W power supply

WS-C3850-12XS-E

IP Services

Stackable, 12-port SFP+ transceiver, 1 network module slot, support for up to 10 G SFP+, 350 -W power supply.

WS-C3850-16XS-E

IP Services

Stackable, 16-port SFP+ transceiver, 1 network module slot, support for up to 10 G SFP+, 350 W power supply.

16 ports are available when the C3850-NM-4-10G network module is plugged into the WS-C3850-12XS-E switch.

WS-C3850-24XS-E

IP Services

Stackable, 24-port SFP+ transceiver, 1 network module slot, support for up to 10 G SFP+, 715 W power supply.

WS-C3850-32XS-E

IP Services

Stackable, 32-port SFP+ transceiver, 1 network module slot, support for up to 10 G SFP+, 715 W power supply.

32 ports are available when the C3850-NM-8-10G network module is plugged into the WS-C3850-24XS-E switch.

WS-C3850-48XS-E

IP Services

Stackable, SFP+ transceivers, 48 ports that support up to 10 G, and 4 ports that support up to 40 G. 750 W power supply.

WS-C3850-48XS-F-E

IP Services

Stackable, SFP+ transceivers, 48 ports that support up to 10 G, and 4 ports that support up to 40 G. 750 W power supply.

WS-C3850-12X48U-E

IP Services

Stackable 12 100M/1G/2.5G/5G/10G and 36 1 G UPoE ports, 1 network module slot, 1100 W power supply

WS-C3850-24XU-E

IP Services

Stackable 24 100M/1G/2.5G/5G/10G UPoE ports, 1 network module slot, 1100-W power supply

Network Modules

Table 3 lists the three optional uplink network modules with 1-Gigabit and 10-Gigabit slots. You should only operate the switch with either a network module or a blank module installed.

 

Table 3 Supported Network Modules

Network Module
Description

C3850-NM-4-1G

Four 1-Gigabit small form-factor pleadable (SFP) module slots. Any combination of standard SFP modules are supported. SFP+ modules are not supported.

C3850-NM-2-10G

Four SFP module slots:

  • Two slots (left side) support only 1-Gigabit SFP modules and two slots (right side) support either 1-Gigabit SFP or 10-Gigabit SFP+ modules.

Supported combinations of SFP and SFP+ modules:

  • Slots 1, 2, 3, and 4 populated with 1-Gigabit SFP modules.
  • Slots 1 and 2 populated with 1-Gigabit SFP modules and Slot 3 and 4 populated with 10-Gigabit SFP+ module.

C3850-NM-4-10G

Four 10-Gigabit slots or four 1-Gigabit slots.

Note The module is supported only on the 48-port models.

C3850-NM-BLANK

No uplink ports.

Catalyst 3650 Switch Models

 

Table 4 Catalyst 3650 Switch Models

Switch Model
Cisco IOS Image
Description

Catalyst 3650-24TS-L

LAN Base

Stackable 24 10/100/1000 Ethernet downlink ports, four 1-Gigabit SFP (small form-factor pluggable) uplink ports, 250-W power supply

Catalyst 3650-48TS-L

LAN Base

Stackable 48 10/100/1000 Ethernet downlink ports, four 1-Gigabit SFP uplink ports, 250-W power supply

Catalyst 3650-24PS-L

LAN Base

Stackable 24 10/100/1000 PoE+1 downlink ports, four 1-Gigabit SFP uplink ports, 640-W power supply

Catalyst 3650-48PS-L

LAN Base

Stackable 48 10/100/1000 PoE+ downlink ports, four 1-Gigabit SFP uplink ports, 640-W power supply

Catalyst 3650-48FS-L

LAN Base

Stackable 48 10/100/1000 Full PoE downlink ports, four 1-Gigabit SFP uplink ports, 1025-W power supply

Catalyst 3650-24TD-L

LAN Base

Stackable 24 10/100/1000 Ethernet downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 250-W power supply

Catalyst 3650-48TD-L

LAN Base

Stackable 48 10/100/1000 Ethernet downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 250-W power supply

Catalyst 3650-24PD-L

LAN Base

Stackable 24 10/100/1000 PoE+ downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 640-W power supply

Catalyst 3650-48PD-L

LAN Base

Stackable 48 10/100/1000 PoE+ downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 640-W power supply

Catalyst 3650-48FD-L

LAN Base

Stackable 48 10/100/1000 Full PoE downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 1025-W power supply

Catalyst 3650-48FQ-L

LAN Base

Stackable 48 10/100/1000 Full PoE downlink ports, four 10-Gigabit SFP+ uplink ports, 1025-W power supply

Catalyst 3650-48PQ-L

LAN Base

Stackable 48 10/100/1000 PoE+ downlink ports, four 10-Gigabit SFP+ uplink ports, 640-W power supply

Catalyst 3650-48TQ-L

LAN Base

Stackable 48 10/100/1000 Ethernet downlink ports, four 10-Gigabit SFP+ uplink ports, 250-W power supply

Catalyst 3650-24TS-S

IP Base

Stackable 24 10/100/1000 Ethernet downlink ports, four 1-Gigabit SFP uplink ports, 250-W power supply

Catalyst 3650-48TS-S

IP Base

Stackable 48 10/100/1000 Ethernet downlink ports, four 1-Gigabit SFP uplink ports, 250-W power supply

Catalyst 3650-24PS-S

IP Base

Stackable 24 10/100/1000 PoE+ downlink ports, four 1-Gigabit SFP uplink ports, 640-W power supply

Catalyst 3650-48PS-S

IP Base

Stackable 48 10/100/1000 PoE+ downlink ports, four 1-Gigabit SFP uplink ports, 640-W power supply

Catalyst 3650-48FS-S

IP Base

Stackable 48 10/100/1000 Full PoE downlink ports, four 1-Gigabit SFP uplink ports, 1025-W power supply

Catalyst 3650-24TD-S

IP Base

Stackable 24 10/100/1000 Ethernet downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 250-W power supply

Catalyst 3650-48TD-S

IP Base

Stackable 48 10/100/1000 Ethernet downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 250-W power supply

Catalyst 3650-24PD-S

IP Base

Stackable 24 10/100/1000 PoE+ downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 640-W power supply

Catalyst 3650-48PD-S

IP Base

Stackable 48 10/100/1000 PoE+ downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 640-W power supply

Catalyst 3650-48FD-S

IP Base

Stackable 48 10/100/1000 Full PoE downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 1025-W power supply

Catalyst 3650-48FQ-S

IP Base

Stackable 48 10/100/1000 Full PoE downlink ports, four 10-Gigabit SFP+ uplink ports, 1025-W power supply

Catalyst 3650-48PQ-S

IP Base

Stackable 48 10/100/1000 PoE+ downlink ports, four 10-Gigabit SFP+ uplink ports, 640-W power supply

Catalyst 3650-48TQ-S

IP Base

Stackable 48 10/100/1000 Ethernet downlink ports, four 10-Gigabit SFP+ uplink ports, 250-W power supply

Catalyst 3650-24TS-E

IP Services

Stackable 24 10/100/1000 Ethernet downlink ports, four 1-Gigabit SFP uplink ports, 250-W power supply

Catalyst 3650-48TS-E

IP Services

Stackable 48 10/100/1000 Ethernet downlink ports, four 1-Gigabit SFP uplink ports, 250-W power supply

Catalyst 3650-24PS-E

IP Services

Stackable 24 10/100/1000 PoE+ downlink ports, four 1-Gigabit SFP uplink ports, 640-W power supply

Catalyst 3650-48PS-E

IP Services

Stackable 48 10/100/1000 PoE+ downlink ports, four 1-Gigabit SFP uplink ports, 640-W power supply

Catalyst 3650-48FS-E

IP Services

Stackable 48 10/100/1000 Full PoE downlink ports, four 1-Gigabit SFP uplink ports, 1025-W power supply

Catalyst 3650-24TD-E

IP Services

Stackable 24 10/100/1000 Ethernet downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 250-W power supply

Catalyst 3650-48TD-E

IP Services

Stackable 48 10/100/1000 Ethernet downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 250-W power supply

Catalyst 3650-24PD-E

IP Services

Stackable 24 10/100/1000 PoE+ downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 640-W power supply

Catalyst 3650-48PD-E

IP Services

Stackable 48 10/100/1000 PoE+ downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 640-W power supply

Catalyst 3650-48FD-E

IP Services

Stackable 48 10/100/1000 Full PoE downlink ports, two 1-Gigabit SFP and two 10-Gigabit SFP+ uplink ports, 1025-W power supply

Catalyst 3650-48FQ-E

IP Services

Stackable 48 10/100/1000 Full PoE downlink ports, four 10-Gigabit SFP+ uplink ports, 1025-W power supply

Catalyst 3650-48PQ-E

IP Services

Stackable 48 10/100/1000 PoE+ downlink ports, four 10-Gigabit SFP+ uplink ports, 640-W power supply

Catalyst 3650-48TQ-E

IP Services

Stackable 48 10/100/1000 Ethernet downlink ports, four 10-Gigabit SFP+ uplink ports, 250-W power supply

1.PoE+ = Power over Ethernet plus (provides up to 30 W per port).

Optics Modules

Catalyst switches support a wide range of optics. Because the list of supported optics is updated on a regular basis, consult the tables at this URL for the latest (SFP) compatibility information:

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html

Cisco Wireless LAN Controller Models

 

Table 5 Cisco WLC 5700 Models

Part Number
Description

AIR-CT5760-25-K9

Cisco 5760 Wireless Controller for up to 25 Cisco access points

AIR-CT5760-50-K9

Cisco 5760 Wireless Controller for up to 50 Cisco access points

AIR-CT5760-100-K9

Cisco 5760 Wireless Controller for up to 100 Cisco access points

AIR-CT5760-250-K9

Cisco 5760 Wireless Controller for up to 250 Cisco access points

AIR-CT5760-500-K9

Cisco 5760 Wireless Controller for up to 500 Cisco access points

AIR-CT5760-1K-K9

Cisco 5760 Wireless Controller for up to 1000 Cisco access points

AIR-CT5760-HA-K9

Cisco 5760 Series Wireless Controller for High Availability

Access Points and Mobility Services Engine

Table 6 lists the supported products of the Catalyst 3650 Switch.

Note On platforms that run Cisco IOS XE releases, the WSSI/3G modules on access points are not supported.

 

Table 6 Catalyst 3650 Switch Supported Products

Product
Platform Supported

Access Point

Cisco Aironet 700, 700W, 1040, 1140, 1260, 1530, 1570, 1600, 1700, 2600, 2700, 3500, 3600, 3700

Mobility Services Engine

3355, Virtual Appliance

Table 6 lists the specific supported Cisco access points.

 

Supported Access Points

Access Points

Cisco Aironet 700 Series

AIR-CAP702W-x-K9

AIR-CAP702I-x-K9

AIR-CAP702I-xK910

Cisco Aironet 700W Series

AIR-CAP702Wx-K9

AIR-CAP702W-xK910

Cisco Aironet 1040 Series

AIR-AP1041N

AIR-AP1042N

AIR-LAP1041N

AIR-LAP1042N

Cisco Aironet 1140 Series

AIR-AP1141N

AIR-AP1142N

AIR-LAP1141N

AIR-LAP1142N

Cisco Aironet 1260 Series

AIR-LAP1261N

AIR-LAP1262N

AIR-AP1261N

AIR-AP1262N

Cisco Aironet 1530 Series

AIR-CAP1532I-x-K9

AIR-CAP1532E-x-K9

Cisco Aironet 1570 Series

AIR-AP1572EAC-A-K9

AIR-AP1572ECx-A-K9

AIR-AP1572ICx-A-K9

Cisco Aironet 1600 Series

AIR-CAP1602E

AIR-CAP1602I

Cisco Aironet 1700 Series

AIR-CAP1702I-x-K9

AIR-CAP1702I-xK910

Cisco Aironet 2600 Series

AIR-CAP2602E

AIR-CAP2602I

Cisco Aironet 2700 Series

AIR-CAP2702I-x-K9

AIR-CAP2702E-x-K9

Cisco Aironet 3500 Series

AIR-CAP3501E

AIR-CAP3501I

AIR-CAP3501P

AIR-CAP3502E

AIR-CAP3502I

AIR-CAP3502P

Cisco Aironet 3600 Series

AIR-CAP3602E

AIR-CAP3602I

Cisco Aironet 3700 Series

AIR-CAP3702I

AIR-CAP3702E

AIR-CAP3702P

Compatibility Matrix

Table 7 lists the software compatibility matrix.

 

Table 7 Software Compatibility Matrix
Catalyst 3650
Cisco 5700 WLC
Cisco 5508 or WiSM2
MSE
ISE
ACS
Cisco PI

03.07.00E

03.07.00E

8.0

7.6

8.02

1.3

5.2

5.3

2.2

03.06.01E
03.06.00E

03.06.01E
03.06.00E

8.0

7.6

8.03

1.2

5.2

5.3

2.2, 2.1.2, or 2.1.1 if MSE is also deployed4

2.1.0 if MSE is not deployed

03.03.03SE

03.03.02SE

03.03.01SE

03.03.00SE

03.03.03SE

03.03.02SE

03.03.01SE

03.03.00SE

7.55

7.5

1.2

5.2

5.3

2.0

2.Because of SHA-2 certificate implementation, MSE 7.6 is not compatible with Cisco IOS XE Release 3.6E and later. Therefore, we recommend that you upgrade to MSE 8.0.

3.Because of SHA-2 certificate implementation, MSE 7.6 is not compatible with Cisco IOS XE Release 3.6E and later. Therefore, we recommend that you upgrade to MSE 8.0.

4.If MSE is deployed on your network, we recommend that you upgrade to Cisco Prime Infrastructure 2.1.2.

5.Prime Infrastructure 2.0 enables you to manage Cisco WLC c7.5.102.0 with the features of Cisco WLC 7.4.110.0 and earlier releases. Prime Infrastructure 2.0 does not support any features of Cisco WLC 7.5.102.0 including the new AP platforms.

 

For more information on the compatibility of wireless software components across releases, see the Cisco Wireless Solutions Software Compatibility Matrix .

OpenFlow Version and Cisco IOS Release Support

The OVA package is available for download in the same location as your system image (.bin) file, on cisco.com

Note The OVA package is compatible only with its corresponding system image file name - as listed in the table below. Do not use an older version of the OVA package with a newer system image file, or a newer OVA package with an older system image file.

 

Cisco IOS Release
Cisco OpenFlow Plug-In Version
Cisco OpenFlow Plug-In
Image Name

IOS XE 3.7.3E

2.0.4

ofa-2.0.4-r3-cat3000-SPA-k9.ova

cat3k_caa-universalk9.SPA.03.07.03.E.152-3.E3.bin

Wired Web UI (Device Manager) System Requirements

Hardware Requirements

 

Table 8 Minimum Hardware Requirements

Processor Speed
DRAM
Number of Colors
Resolution
Font Size

233 MHz minimum6

512 MB7

256

1024 x 768

Small

6.We recommend 1 GHz.

7.We recommend 1 GB DRAM.

Software Requirements

– Windows 2000, Windows 2003, Windows XP, Windows Vista, or Windows 7

– With JavaScript enabled: Internet Explorer 6.0 and 7.0, or Firefox 26.0

Wireless Web UI Software Requirements

  • Operating Systems

– Windows 7

– Windows 8

– Mac OS X 10.8

  • Browsers

– Google Chrome—Version 35

– Microsoft Internet Explorer—Versions 10 or 11

– Mozilla Firefox—Version 30

– Safari—Version 6.1

Finding the Software Version and Feature Set

Table 9 shows the mapping of the Cisco IOS XE version number and the Cisco IOS version number.

 

Table 9 Cisco IOS XE to Cisco IOS Version Number Mapping

Cisco IOS XE Version
Cisco IOSd Version
Cisco Wireless Control Module Version
Access Point Version

03.07.00E

15.2(3)E

10.3.100.0

15.3(3)JNB

03.06.01E

15.2(2)E1

10.2.111.0

15.3(3)JN3

03.06.00E

15.2(2)E

10.2.102.0

15.3(3)JN

03.03.03SE

15.0(1)EZ3

10.1.130.0

15.2(4)JB5h

03.03.02SE

15.0(1)EZ2

10.1.121.0

15.2(4)JB5

03.03.01SE

15.0(1)EZ1

10.1.110.0

15.2(4)JB2

03.03.00SE

15.0(1)EZ

10.1.100.0

15.2(4)JN

The package files for the Cisco IOS XE software are stored on the system board flash device (flash:).

You can use the show version privileged EXEC command to see the software version that is running on your switch.

Note Although the show version output always shows the software image running on the switch, the model name shown at the end of this display is the factory configuration and does not change if you upgrade the software license.

You can also use the dir filesystem : privileged EXEC command to see the directory names of other software images that you might have stored in flash memory.

Upgrading the Switch Software

For information about how to upgrade the switch software, see the System Management Configuration Guide, Cisco IOS XE Release 3E (Catalyst 3650 Switches) at the following URL:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3650/software/release/3e/system_management/configuration_guide/b_sm_3e_3650_cg.html.

Table 10 Software Images

Image
File Name

Universal

cat3k_caa-universalk9.SPA.03.07.00.E.152-3.E1.bin

Universal without DTLS

cat3k_caa-universalk9ldpe.SPA.03.07.00.E.152-3.E1.bin

Important Upgrade Note

After you upgrade to Cisco IOS XE Release 3.7E, the WebAuth success page behavior is different from the behavior seen in Cisco IOS XE Release 3.3.X SE. After a successful authentication on the WebAuth login page, the original requested URL opens in a pop-up window and not on the parent page. Therefore, we recommend that you upgrade the Web Authentication bundle so that the bundle is in the format that is used by the AireOS Wireless LAN Controllers.

To download a sample Web Authentication bundle, follow these steps:

Step 1 Browse to http://software.cisco.com/download/navigator.html .

Step 2 Navigate to Products > Switches > Campus LAN Switches - Access > Cisco Catalyst 3650 Series Switches .

Step 3 Click a switch model.

Step 4 Click Wireless Lan Controller Web Authentication Bundle .

Step 5 Choose Release 3.7.0 and click Download .

Step 6 After the download, follow the instructions provided in the Read Me file that is attached in the bundle.

Note When you upgrade to Cisco IOS XE Release 3.7.5E the SSH access is lost, because it cannot use the CISCO_IDEVID_SUDI_LEGACY RSA server key. Before upgrade, generate the server key using the crypto key generate rsa command in global configuration mode.
To verify whether the RSA server key is available on your device, run the show crypto key command.

Note In a High Availability scenario, if you download the Web Authentication bundle to the active controller, the bundle cannot be synchronized with the standby controller. Therefore, we recommend that you also manually download the Web Authentication bundle to the standby controller.

Note During an IOS image upgrade or downgrade on a PoE switch, the microcode is updated to reflect applicable feature enhancements and bug fixes. Do not restart the switch during the upgrade or downgrade process. With Cisco IOS 3.7E and later releases, the process takes approximately 1 minute to complete. The microcode update occurs only during an image upgrade or downgrade on PoE switches. It does not occur during switch reloads or on non-PoE switches.

 

Features

The Catalyst 3650 switch supports three different feature sets:

  • LAN Base feature set—Provides basic Layer 2+ features, including access control lists (ACLs) and quality of service (QoS) and up to 255 VLANs.
  • IP Base feature set—Provides Layer 2+ and basic Layer 3 features (enterprise-class intelligent services). These features include access control lists (ACLs), quality of service (QoS), ACLs, QoS, static routing, EIGRP stub routing, IP multicast routing, Routing Information Protocol (RIP), basic IPv6 management, the Open Shortest Path First (OSPF) Protocol, and support for wireless controller functionality. The license supports up to 4094 VLANs.
  • IP Services feature set—Provides a richer set of enterprise-class intelligent services and full IPv6 support. It includes IP Base features plus Layer 3 routing (IP unicast routing and IP multicast routing). The IP Services feature set includes protocols such as the Enhanced Interior Gateway Routing Protocol (EIGRP), the Open Shortest Path First (OSPF) Protocol, and support for wireless controller functionality. The license supports up to 4094 VLANs.

Note A separate access point count license is required to use the switch as a wireless controller.

For more information about the features, see the product data sheet at this URL:

http://www.cisco.com/en/US/products/ps13133/products_data_sheets_list.html

Interoperability with Other Client Devices

This section describes the interoperability of this version of the switch software release with other client devices.

Table 11 lists the client types on which the tests were conducted. The clients included laptops, handheld devices, phones, and printers.

 

Table 11 Client Types

Client Type and Name
Version
Laptop

Intel 4965
11.5.1.15 or 12.4.4.5, v13.4

Intel 5100/6300
v14.3.0.6

Intel 6205
v15.10.5.1

Intel 6235
V15.10.5.1

Intel 6300
v15.10.4.2

Intel 7260(11AC)
17.0.0.34, Windows 8.1

Dell 1395/1397
XP/Vista: 5.60.18.8 Win7: 5.30.21.0

Dell 1505/1510/Broadcom 4321MCAG/4322HM
5.60.18.8

Dell 1515 (Atheros)
8.0.0.239

Dell 1520/Broadcom 43224HMS
5.60.48.18

Dell 1530 (Broadcom BCM4359)
v5.100.235.12

Cisco CB21
v1.3.0.532

Atheros HB95
7.7.0.358

MacBook Pro (Broadcom)
5.10.91.26

Broadcom 4360(11AC)
6.30.163.2005

Macbook Air (11AC)
10.9.3

Macbook Air
10.9.3
Handheld Devices

Apple iPad

iOS 5.0.1

Apple iPad2

iOS 6.0.1

Apple iPad3

8.0.2(12A405)

Apple iPad Air

8.0.2(12A405)

Apple iPad Mini

8.0.2(12A405)

Samsung Galaxy Tab

Android 3.2

Intermec CK70

Windows Mobile 6.5 / 2.01.06.0355

Intermec CN50

Windows Mobile 6.1 / 2.01.06.0333

Symbol MC5590

Windows Mobile 6.5 / 3.00.0.0.051R

Symbol MC75

Windows Mobile 6.5 / 3.00.2.0.006R
Phones and Printers

Cisco 7921G

1.4.2.LOADS

Cisco 7925G

1.4.2.LOADS

Ascom i75

1.8.0

Spectralink 8030

119.081/131.030/132.030

Vocera B1000A

4.1.0.2817

Vocera B2000

4.0.0.345

Apple iPhone 4

iOS 6.0.1

Apple iPhone 4S

8.0.2(12A405)

Apple iPhone 5s

8.0.2(12A405)

Apple iPhone 5c

8.0.2(12A405)

Apple iPhone 6

8.0.2(12A405)

Ascom i62

2.5.7

HTC Sensation

Android 2.3.3

Samsung Galaxy S II

Android 2.3.3

SpectraLink 8450

3.0.2.6098/5.0.0.8774

Samsung Galaxy Nexus

Android 4.0.2

Samsung Galaxy S4 (GT-I9500)

4.4.2

Samsung Galaxy Note (SM-900)

4.4.2

Important Notes

  • A switch stack containing a mix of Catalyst 3850 and Catalyst 3650 switches is not supported.
  • With Cisco Prime Infrastructure 2.1.1, the refresh config and inventory collection tasks from the switch might take anywhere from 20 minutes to 40 minutes. For more information, see CSCum62747 on the Bug Search Tool.
  • Sometimes a delay is seen in the handling of ICMP reply packets when the packet timer is set to milliseconds (if the value is under 1 second). This is an expected behavior.
  • Although visible in the CLI, the following commands are not supported:

– collect flow username

– authorize-lsc-ap (CSCui93659)

  • The following features are not supported in Cisco IOS XE Release 3.7E:

– Mesh, FlexConnect, and OfficeExtend access point deployment

– IP-in-IP (IPIP) Tunneling

– Wireless Guest Anchor Controller (The Catalyst 3850 switch can be configured as a foreign controller.)

– Resilient Ethernet Protocol

– MVR (Multicast VLAN Registration)

– IPv6 routing - OSPFv3 Authentication

– Call Home

– DVMRP Tunneling

– Port Security on EtherChannel

– 802.1x Configurable username and password for MAB

– Link State Tracking (L2 Trunk Failover)

– Disable Per VLAN MAC Learning

– IEEE 802.1X-2010 with 802.1AE support

– Command Switch Redundancy

– CNS Config Agent

– Dynamic Access Ports

– IPv6 Ready Logo phase II - Host

– IPv6 IKEv2 / IPSecv3

– OSPFv3 Graceful Restart (RFC 5187)

– Fallback bridging for non-IP traffic between VLANs

– DHCP snooping ASCII circuit ID

– Protocol Storm Protection

– 802.1x NEAT

– Per VLAN Policy & Per Port Policer

– Packet Based Storm Control

– Ingress/egress Shared Queues

– Trust Boundary Configuration

– Cisco Group Management Protocol (CGMP)

– Device classifier for ASP

– IPSLA Media Operation

– Passive Monitoring

– Performance Monitor (Phase 1)

– AAA: RADIUS over IPv6 transport

– AAA: TACACS over IPv6 Transport

– Auto QoS for Video endpoints

– EX SFP Support (GLC-EX-SMD)

– IPv6 Strict Host Mode Support

– IPv6 Static Route support on LAN Base images

– VACL Logging of access denied

– RFC5460 DHCPv6 Bulk Leasequery

– DHCPv6 Relay Source Configuration

– RFC 4293 IP-MIB (IPv6 only)

– RFC 4292 IP-FORWARD-MIB (IPv6 only)

– RFC4292/RFC4293 MIBs for IPv6 traffic

– Layer 2 Tunneling Protocol Enhancements

– UniDirectional Link Routing (UDLR)

– Pragmatic General Multicast (PGM)

– DAI, IPSG Interoperability

– Ingress Rate Limiting

– Ingress Strict Priority Queuing (Expedite)

– Weighted Random Early Detect (WRED)

– Improvements in QoS policing rates

– Fast SSID support for guest access WLANs

Scaling Guidelines

 

Table 12 Scaling Guidelines
System Feature
Maximum Limit

Number of HTTP session redirections system-wide (wired/wireless)

Up to 100 clients per second

Number of HTTPS session redirections system-wide (wired/wireless)

Up to 20 clients per second

Limitations and Restrictions

  • You cannot configure NetFlow export using the Ethernet Management port (g0/0).
  • The maximum committed information rate (CIR) for voice traffic on a wireless port is 132 Mb/sec.
  • MACSec Key Agreement (MKA) encryption is not supported between switches and host devices.
  • Outdoor access points are supported only when they are in Local mode.
  • VRRPv3 for IPv4 and IPv6 is not supported.
  • When configuring QoS queuing policy, the sum of the queuing buffer should not exceed 100%.
  • For QoS policies, only switched virtual interfaces (SVI) are supported for logical interfaces.
  • QoS policies are not supported for port-channel interfaces, tunnel interfaces, and other logical interfaces.
  • Restrictions for Cisco TrustSec:

– Cisco TrustSec can be configured only on physical interfaces, not on logical interfaces.

– Cisco TrustSec for IPv6 is not supported.

– Dynamic binding of IP-SGT is not supported for hosts on Layer 3 physical routed interfaces because the IP Device Tracking feature for Layer 3 physical interfaces is not supported.

– Cisco TrustSec cannot be configured on a pure bridging domain with IPSG feature enabled. You must either enable IP routing or disable the IPSG feature in the bridging domain.

– Cisco TrustSec on the switch supports up to 255 security group destination tags for enforcing security group ACLs.

– Cisco TrustSec VLAN-to-SGT binding cannot be enabled in pure bridging domain. You have to either manually enable IP device tracking on the ports in the VLAN, or enable SVI interface for the VLAN.

– For Cisco IOS Release 3.7E and later, Cisco TrustSec VLAN-to-SGT binding cannot be enabled in pure bridging domain. You have to either manually enable IP device tracking on the ports in the VLAN, or enable SVI interface for the VLAN.

  • When a logging discriminator is configured and applied to a device, memory leak is seen under heavy syslog or debug output. The rate of the leak is dependent on the quantity of logs produced. In extreme cases, the device may crash. As a workaround, disable the logging discriminator on the device.
  • Restrictions for Cisco Plug-in for OpenFlow:

– STRIP VLAN cannot work for L2 packets that do not have a payload.

  • The switch supports only physical ports in access and trunk modes. It does not support Etherchannel ports in access and trunk modes.

Caveats

Cisco Bug Search Tool

The Bug Search Tool (BST), which is the online successor to Bug Toolkit, is designed to improve the effectiveness in network risk management and device troubleshooting. The BST allows partners and customers to search for software bugs based on product, release, and keyword, and aggregates key data such as bug details, product, and version. The tool has a provision to filter bugs based on credentials to provide external and internal bug views for the search input.

To view the details of a caveat listed in this document:

1. Access the BST (use your Cisco user ID and password) at https://tools.cisco.com/bugsearch/ .

2. Enter the bug ID in the Search For: field.

Open Caveats

 

Bug ID
Headline

CSCuo75037

High Priority Access Point Keeps Flapping when License Count is Exceeded

CSCuu13106

Traffic not recovered over cts link after hot swap of uplink

CSCuu86712

FED Process Traceback @al_lookup_add_generic_entry while enabling IPSG

CSCuz19779

ENH. DHCP malformed Offer packets get dropped (as per RFC) on 3850 CPU

CSCuz75030

license feature display issue after IOS upgrade

CSCva28133

3650 stack generates IPSG messages: %EM-4-AGED:

CSCvb26404

8 port group showing as not connect on code 3.7.3

CSCvb30329

WS-C3850-48XS/3.7.4E POST: Thermal, Fan Tests : End, Status Failed

CSCvb39796

SNMP Trap is not include  entPhysicalDescr and entPhysicalName on C3850

CSCvb61022

LACP is not negotiated via Q in Q tunnel

CSCvc47165

SFP port detect link-flap error and it's in error-disabled state on 3650

CSCvc63975

Ping fails when RSPAN is configured and SRC port/vlan are in same trunk as the DEST remote-span vlan

CSCvc73079

\"Speed nonegotiate\" disappeared after a couple of ORI'ing SFP cables on back-to-back switch

CSCvd17125

Traceback seen after switchover with SPAN configuration

Resolved Caveats in Cisco IOS XE Release 3.7.5E

 

Bug ID
Headline

CSCud22987

STANDBY wcm: %OSAPI-4-TIME_SHIFT_DETECTED: Detected backward time shift

CSCun71347

Catalyst 3850 crash in Cisco Express Forwarding: IPv4 process while processing ARP throttle elements.

CSCup05919

3850 - Power given, but State Machine Power Good wait timer timed out

CSCus83638

5-GHz radio on Cisco AP beaconing but not accepting client associations

CSCuv65173

Scrubs Delta FEP Supply not responding in slot B

CSCuw17864

3650 will not forward 5246 with ip helper

CSCuw41152

'%NGWC_PLATFORM_FEP-1-FRU_PS_SIGNAL_FAULTY' message is not output

CSCuy67349

3650/3850 IPv6 ND RAGUARD drops RS packets (ICMPv6 type 133)

CSCuy83302

Catalyst 3850 - Port-security may interfere with spantree bpdu guard

CSCuy99151

3850 failing Inline Power Controller Tests

CSCuz06686

Port-channel no drops although member port drops on C3650/C3850

CSCuz08086

PD's not getting PoE on multiple interfaces in 3850 stack

CSCuz24063

Storm-control configured on port-channel cannot reflect to member link

CSCuz28295

TCN generate late and mac learn issue on 3650 stack after RSTP TCN

CSCuz54670

WS-C3850-24XS: Local port still up when TX fiber removed from 10G SFP

CSCuz57493

High CPU observed in punjectrx fed-ots-main thread

CSCuz60141

SDP drops causing stack issues.

CSCuz87489

brelay: No crashinfo generated since core resource was not set

CSCuz89095

3850 switch at Provisoned state after a random reload/power outage

CSCuz98375

OSPF flaps on Cat3850 with 1s/3s timers with 03.07.03E

CSCva02227

C3850s in stack don't return ports 45-48 when polled through SNMP

CSCva13231

CRC/Corrupted packets after a link failure with MACSEC and 802.1q (3850)

CSCva21500

Cat3650 interface don't up when "speed nonegotiate" is applied

CSCva22528

3850:Traffic only flowing between ports on Port Asic

CSCva22545

LACP with mode active doesn't come up in 3.7.4 .

CSCva25359

NOVA: Evaluation of glibc vunlerabilities on IOS/IOS-XE

CSCva40478

ip dhcp snooping trust on port-channel does not reflect on member link

CSCva43372

Interoperability - remote side CRC error

CSCva55550

incorrect CDP/LACP/UDLD neighbor information on 3850 - 3.7.3 and 3.7.4

CSCva76630

BENI MR5: RSPAN traffic is not encrypted on CTS MACSEC SAP link

CSCva92074

%PLATFORM_PM-6-MODULE_ERRDISABLE output when inserting SFP

CSCva98034

EICORE_GET_NEXT_MC: end of items / Error using the collection / Cat3850

CSCvb22505

Port security mac address not aging out when relearned from a Channel

CSCvb26637

IGMPv2 leave messages sent back to ingress intferface

CSCvb34556

Cat3850 - 10G member of Ether-channel with LACP is continuously flapping

CSCvb56934

commit to 3.7.x and 16.3.x Zero RX counters on te1/1/3 port on bootup

CSCvb60511

SSH doesn't work with MACSEC configured between 3850 and 4500

CSCvb65304

Output drops and Output errors increment simultaneously in show interfaces

CSCvb97732

3850/3650 Switch Crashes Following "network-policy" Configuration Change on Interface

CSCvc26787

%LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/4, changed state to down

CSCvc62241

SGACL enforcement under VRF unexpectedly blocking traffic

Resolved Caveats in Cisco IOS XE Release 3.7.4E

 

Bug ID
Headline

CSCuw23090

3650 trunk interface malfunction issue when speed nonegotiate is applied

CSCuw59595

Cannot get expected packet rate for PQ in output QoS policy

CSCuw66770

udld err-disbale on remote device on reloading 3650

CSCuw88823

Traceback on 3650 during reload

CSCuw95074

3650 Packets with fragment offset bit hit wrong class-map

CSCux16194

3650 does not change to link down on removing SFP Tx cable

CSCux16628

Without IPv6 enabled, IPv6 traffic to FF02::2 and FF02::3 is send to CPU

CSCux28536

Interface stays in down state after link flap on the neighbor

CSCux41556

QoS cannot behave normally on 3650 with S/W ver.3.7.2E, 100M/full

CSCux56459

Stack reload due to doubLast Updated: Feb 16, 2017Last Updated: Feb 16, 2017le free (FREEFREE)

CSCux64558

Inline power stops on the port in err-disabled state.

CSCux71386

After clear counters is issued, the Xmit-err shows a very huge number

CSCux77360

Cat3650-24TS-S connection issue with FUJITSU switch SR-S324TL2

CSCuy21298

Performance Monitoring not working on 3650

CSCuy44807

Switch crashes with Segmentation fault(11), Process = NGWC DOT1X Process

CSCuy46096

Uncabling SFP port up/up when "speed nonegotiate" is configured

Resolved Caveats in Cisco IOS XE Release 3.7.3E

 

Bug ID
Headline

CSCum06547

NG3K standalone crashed after removed energywise domain

CSCus17795

Same port name displays in lower and upper case during OpenFlow configuration

CSCus84849

ipdt difference in config and default configuration

CSCus99269

MCMA: dACL should not be synced to MA & should be allowed on MA as well

CSCut14397

Bad parsing when keyword is truncated during OpenFlow LXC configuration

CSCut25533

PnPA: non-vlan CLI should only apply to newly bootup devices

CSCut87285

MAC address being learnt on an individual Port-channel member interface

CSCut88813

WLAN cannot be configured with a space in psk shared key on NGWC 3.7

CSCuu09331

CTS link not passing traffic after SSO

CSCuu15831

Switch reboots when SPAN configured under "cts manual"

CSCuu34717

3850 cts enforcement for multicast traffic

CSCuu36487

Cat3k: OF: Vlan strip action doesnot work for ipv6 packets

CSCuu49195

Access session cache entries not getting updated

CSCuu56466

"Total output drops" counter of a certain ports does not increment

CSCuu56511

OutDiscards counter does not increment

CSCuu66503

HTTPs: IOS HTTPS client not enforcing subject-name verification

CSCuu82607

Evaluation of all for OpenSSL June 2015

CSCuu85807

Switch returns wrong OID when standalone

CSCuu87659

CpmCPUTotal5minRev average value of stack switch 2 on 3850 is incorrect.

CSCuu97048

Traffic is dropped due to static mac entry on foreign interface

CSCuu97550

4500X - SNMP dot1dTpFdbPort retuning incorrect value

CSCuv02964

Memory leak with dot1x on IOS-XE switch

CSCuv07427

TCP connection cannot be established with Openflow agent due to

CSCuv13351

MAC address is learned on RSPAN vlan after stack switchover

CSCuv14890

DHCPv6 solicit frame (IPv6 multicast) frame replication issues

CSCuv19160

Config lock mode during redundancy prevents PnP redirection.

CSCuv19204

NTP Server take 15 - 18 minutes to sync with API-EM clock

CSCuv19773

"nmsp attach suppress" not being added into run-config on WS-C3850-24P

CSCuv20618

3650 - Port goes down when 'no mdix auto' is configured, POE works fine

CSCuv20921

mac address-table learning command should not be allowed for RSPAN vlan

CSCuv22736

After reload, C3850-NM-4-10G/GLC-SX-MM not linkup with speed nonegotiate

CSCuv36348

management port can be added to OpenFlow config

CSCuv42533

Flow addition failing with wildcard match

CSCuv62574

GRE tunnel in up/down state when tunnel source configured via interface

CSCuv78424

Unicast ARP packets are duplicated

CSCuv85232

openflow exclusive config not cleared on standby

CSCuv88334

mismatch in the rf parameters mode between cli/gui

CSCuw06386

Flows are not prgrmd in PD after consecutive clearopenflow switch1 cntrl

CSCuw19798

GRE Tunnel not working on Catalyst 3850

CSCuw21694

Invalid flow count increasing in PD when i remove and add OF ports

CSCuw22050

Switch reports Power device detected when non device is connected

CSCuw28638

3650 Rebooting during EAP-TLS authentication

CSCuw36865

L2 switched traffic matched by L3 SVI VACL in the output direction

CSCuw38233

Mobility tunnel between MA/MC drops when default egress policy is deny

CSCuw39020

access-session vlan-assignment ignore-errors breaks dynamic vlan assign

CSCuw55669

Crash is seen in iosd on switch and auth-mgr

CSCuw67734

CFD CSCun37216 entAliasMappingIdentifier broken on 03.07.02E...

CSCuw73525

3650 DHCPv6 Guard does not block rogue DHCP server to provide IPv6 addr

CSCuw82216

Catalyst3850: Upgrade in install mode corrupts the flash - EXT2-fs error

CSCuw98232

Fixing build breakage for 15.2(3)E/3.7.3E which happened with CSCuv62574

Resolved Caveats in Cisco IOS XE Release 3.7.2E

 

Bug ID
Headline

CSCup55828

Need error message when using a wrong image to do software install

CSCuq44139

Need to disable Macsec for half-duplex mode on downlink ports

CSCus69196

After overnight ping traffic on active, standby sw#6 crashes at iosd

CSCus89656

Trust, DSCP transparency, COPP not working when a member comes up

CSCut26365

Packet drop on 3850 by an unrelated ACL entry

CSCut49440

3850 class-map "match" doesn't work correctly

Resolved Caveats in Cisco IOS XE Release 3.7.1E

There are no caveats to list here.

Resolved Caveats in Cisco IOS XE Release 3.7.0E

 

Bug ID
Headline

CSCun29064

Show switch details show false stack linkdown

CSCun54503

No QOS Per Port Per VLAN configuration option 3650 & 3850

CSCuo00561

Switch unusable for 8 minutes after ?default interface? w/ L3 CTS config

CSCup40892

Wireless clients may be stuck in idle state when FQDN feature is enabled

CSCup62150

After Inter-Switch Roam, QoS policy is not applied to Client

CSCuq02810

STP check bypassed for data traffic sent to switch mac address

Troubleshooting

For the most up-to-date, detailed troubleshooting information, see the Cisco TAC website at this URL:

http://www.cisco.com/en/US/support/index.html

Choose Product Support > Switches. Then choose your product and click Troubleshoot and Alerts to find information for the problem that you are experiencing.

Related Documentation

  • Cisco IOS XE 3E Release documentation at this URL:

http://www.cisco.com/c/en/us/support/ios-nx-os-software/ios-xe-3e/tsd-products-support-series-home.html

  • Catalyst 3650 switch documentation at this URL:

http://www.cisco.com/go/cat3650_docs

  • Error Message Decoder at this URL:

https://www.cisco.com/cgi-bin/Support/Errordecoder/index.cgi

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation , which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html

Subscribe to the What’s New in Cisco Product Documentation , which lists all new and revised Cisco Technical documentation, as an RSS feed and deliver content directly to your desktop using a read application. The RSS feeds are a free service.

 

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks . Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

© 2014-2016 Cisco Systems, Inc. All rights reserved.

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products