Catalyst 3550 Multilayer Switch Software Configuration Guide, 12.1(8)EA1
Supported MIBs
Downloads: This chapterpdf (PDF - 110.0KB) The complete bookPDF (PDF - 8.93MB) | Feedback

Supported MIBs

Table Of Contents

Supported MIBs

MIB List

Using FTP to Access the MIB Files


Supported MIBs


This appendix lists the supported management information base (MIBs) for this release. It contains these sections:

MIB List

Using FTP to Access the MIB Files

MIB List

RFC 1213

IF-MIB

CISCO-CDP-MIB

CISCO-IMAGE-MIB

CISCO-FLASH-MIB

OLD-CISCO-CHASSIS-MIB

CISCO-PAGP-MIB

CISCO-VTP-MIB

CISCO-HSRP-MIB

OLD-CISCO-TS-MIB

BRIDGE-MIB (RFC1493)

CISCO-VLAN-MEMBERSHIP-MIB

CISCO-VLAN-IFINDEX-RELATIONSHIP-MIB

CISCO-STACK-MIB (only a subset of the available MIB objects are implemented; not all objects are supported)

RMON 1 MIB (only RMON etherStats, etherHistory, alarms, and events are supported)

IGMP MIB

PIM MIB

CISCO-STP-EXTENSIONS-MIB

OSPF-MIB (RFC 1253)

IPMROUTE-MIB

CISCO-MEMORY-POOL-MIB

CISCO-RTTMON-MIB (subsystems supported: sub_rtt_rmon and sub_rtt_rmonlib)

CISCO-PROCESS-MIB

OLD-CISCO-SYS-MIB

CISCO-CONFIG-MAN-MIB

CISCO-MAC-NOTIFICATION-MIB

CISCO-IGMP-FILTER-MIB

Using FTP to Access the MIB Files

You can obtain each MIB file by using this procedure:


Step 1 Use FTP to access the server ftp.cisco.com.

Step 2 Log in with the username anonymous.

Step 3 Enter your e-mail username when prompted for the password.

Step 4 At the ftp> prompt, change directories to /pub/mibs/v1 and the /pub/mibs/v2.

Step 5 Use the get MIB_filename command to obtain a copy of the MIB file.



Note You can also access information about MIBs on the Cisco web site:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml