Cisco NX-OS Routing Messages Reference
Introduction to Routing Messages
Downloads: This chapterpdf (PDF - 70.0KB) The complete bookPDF (PDF - 6.73MB) | Feedback

Introduction to Routing Messages

Table Of Contents

Introduction to Routing Messages

Overview

Routing Messages

Error Message

Explanation

Recommended Action


Introduction to Routing Messages


This chapter includes the following sections:

Overview

Routing Messages

Overview

This reference includes routing messages and recovery procedures for the Cisco Nexus platforms. The messages are listed in alphabetical order by the system facility that produces them. Within each system facility section, messages are listed alphabetically by mnemonics. Each system message is followed by an explanation and a recommended action.

Routing Messages

The following example shows a typical routing message:

Error Message    AM-2-API_INIT Format: Failed to initialize %s API

Explanation    An unrecoverable software error has occurred during the AM initialization.

Recommended Action    Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.

This section includes the following topics:

Error Message

Explanation

Recommended Action

Error Message

States the message.

Explanation

Provides an explanation of the message.

Recommended Action

Provides an action to take.