Cisco NX-OS FCoE Configuration Guide for Nexus 7000 and MDS 9000
Feature History by Platform
Downloads: This chapterpdf (PDF - 1.15 MB) The complete bookPDF (PDF - 3.26 MB) | The complete bookePub (ePub - 483.0 KB) | The complete bookMobi (Mobi - 917.0 KB) | Feedback

Feature History by Platform

Feature History by Platform

This chapter contains the following sections:

Cisco Nexus 7000: Supported Features

Feature Release Feature Information
FCoE 7.2(0)D1(1)

Supports F3 Series modules.

FCoE over FEX 7.2(0)D1(1)

This feature was introduced.

Configuring Dynamic FCoE Using FabricPath 7.2(0)D1(1)

This feature was introduced.

FCoE over physical port vPC 6.2(6)

This feature was introduced. For information, see the Cisco 7000 Series NX-OS Interfaces Configuration Guide.

FIP 5.2(1)

Supports the T11-compliant FIP.

FCoE 5.2(1)

This feature was introduced.

FCoE 6.1(1)

Supports F2 Series modules.

FCoE 6.1(1)

Supports F2e Series modules (SFP+ only).

Cisco MDS 9000:Supported Features

Feature Release Feature Information
FIP 5.2(1)

Supports the T11-compliant FIP.

FCoE 5.2(1)

This feature was introduced.