Cisco NX-OS FCoE Configuration Guide for Nexus 7000, MDS 9500 and MDS 9250i
New and Changed Information
Downloads: This chapterpdf (PDF - 1.09MB) The complete bookPDF (PDF - 2.48MB) | The complete bookePub (ePub - 181.0KB) | Feedback

New and Changed Information

This chapter includes the following sections:

Cisco Nexus 7000: New and Changed Information

This section provides release-specific information for each new and changed features documented for the Cisco Nexus 7000 Series switches.

The latest version of this document is available at the following Cisco website:

http:/​/​www.cisco.com/​en/​US/​products/​ps9670/​products_​installation_​and_​configuration_​guides_​list.html

To check for additional information about Cisco Nexus 7000 software, see the Cisco Nexus 7000 Series NX-OS Release Notes available at the following Cisco website:

http:/​/​www.cisco.com/​en/​US/​products/​ps9670/​prod_​release_​notes_​list.html

Table 1 New and Changed Features
Feature Description Changed in Release

FCoE Over Physical Port vPC

Support for Fibre Channel over Ethernet (FCoE) over the physical port virtual port channel (vPC) for the F2 Series and F2e Series modules. This feature is not supported on the F3 Series modules.

6.2(6)

F2e Series Module support (SPF+ only)

FCoE support on F2e Series modules

6.1(2)

F2 Series Module support

FCoE support on F2 Series modules

6.1(1)

No changes in this release

6.0(1)

FCoE

Initial FCoE support

5.2(1)

Cisco MDS 9500 and 9250i: New and Changed Information

This section provides release-specific information for each new and changed features documented for the Cisco MDS 9500 Series switches and MDS 9250i Multiservice Fabric switch.

The latest version of this document is available at the following Cisco website:

http:/​/​www.cisco.com/​en/​US/​products/​ps9670/​products_​installation_​and_​configuration_​guides_​list.html

To check for additional information about Cisco MDS 9000 software, see the Cisco MDS 9000 Series NX-OS Release Notes available at the following Cisco website:

http:/​/​www.cisco.com/​en/​US/​products/​ps9670/​prod_​release_​notes_​list.html

Table 2 New and Changed Features
Feature Description Changed in Release Where Documented
FCoE
  • Updated the Cisco MDS 9250i Multiservice Fabric Switch change in the Ethernet port channel or the channel group ID numbers.
  • Updated the QoS name change in the Cisco MDS 9250i Multiservice Fabric Switch.
6.2(5)
  • Configuring FCoE VLANs and Virtual Interfaces
  • Storage VDC on Cisco Nexus 7000 Series Switches
FCoE Initial FCoE support 5.2(1) This document