Cisco Nexus 7000 Series NX-OS Multicast Routing Command Reference
L Commands
Downloads: This chapterpdf (PDF - 78.0KB) The complete bookPDF (PDF - 7.54MB) | Feedback

l Commands

Table Of Contents

l Commands

layer-2 multicast lookup mac (Global configuration mode)

layer-2 multicast lookup mac (VLAN configuration mode)


l Commands


This chapter describes the Cisco NX-OS multicast routing commands that begin with L.

layer-2 multicast lookup mac (Global configuration mode)

To enable lookup type, use the layer-2 multicast lookup mac command. To disable this command use the no form of this command.

layer-2 multicast lookup mac

no layer-2 multicast lookup mac

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Global configuration mode

Supported User Roles

network-admin
network-operator
vdc-admin
vdc-operator

Command History

Release
Modification

5.2(1)

This command was introduced.


Usage Guidelines

This command does not require a license.

Examples

This example shows how to enable lookup type:

switch(config)# layer-2 multicast lookup mac
switch(config)# 
 
   

This example shows how to disable lookup type:

switch(config)# no layer-2 multicast lookup mac
switch(config)# 

Related Commands

Command
Description

show ip igmp snooping lookup-mode

Displays the IGMP snooping lookup mode information.


layer-2 multicast lookup mac (VLAN configuration mode)

To enable lookup type, use the layer-2 multicast lookup mac command. To disable this command use the no form of this command.

layer-2 multicast lookup mac

no layer-2 multicast lookup mac

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

VLAN configuration mode

Supported User Roles

network-admin
network-operator
vdc-admin
vdc-operator

Command History

Release
Modification

5.2(1)

This command was introduced.


Usage Guidelines

This command does not require a license.

Examples

This example shows how to enable lookup type:

switch(config-vlan)# layer-2 multicast lookup mac
switch(config)# 

Related Commands

show ip igmp snooping lookup-mode

Displays the IGMP snooping lookup mode information.