Cisco Nexus 7000 Series NX-OS Multicast Routing Command Reference
F Commands
Downloads: This chapterpdf (PDF - 95.0KB) The complete bookPDF (PDF - 7.54MB) | Feedback

F Commands

Table Of Contents

F Commands

feature msdp

feature pim

feature pim6


F Commands


This chapter describes the Cisco NX-OS multicast routing commands that begin with F.

feature msdp

To enable the Multicast Source Discovery Protocol (MSDP) feature, use the feature msdp command. To disable this feature, use the no form of this command.

feature msdp

no feature msdp

Syntax Description

This command has no arguments or keywords.

Defaults

Disabled

Command Modes

Global configuration mode

Supported User Roles

network-admin
vdc-admin

Command History

Release
Modification

4.0(1)

This command was introduced.


Usage Guidelines

This command requires the Enterprice Services License.

Examples

This example shows how to enable the MSDP feature:

switch(config)# feature msdp

switch(config)# 

Related Commands

Command
Description

show ip pim vrf

Displays the per VRF information.


feature pim

To enable the Protocol Independent Multicast (PIM) feature, use the feature pim command. To disable this feature, use the no form of this command.

feature pim

no feature pim

Syntax Description

This command has no arguments or keywords.

Defaults

Disabled

Command Modes

Global configuration mode

Supported User Roles

network-admin
vdc-admin

Command History

Release
Modification

4.0(1)

This command was introduced.


Usage Guidelines

This command requires the Enterprice Services License.

Examples

This example shows how to enable the PIM:

switch(config)# feature pim

switch(config)# 

Related Commands

Command
Description

show ip pim route

Displays the PIM route specific information.


feature pim6

To enable the Protocol Independent Multicast (PIM) for IPv6 feature, use the feature pim6 command. To disable this feature, use the no form of this command.

feature pim6

no feature pim6

Syntax Description

This command has no arguments or keywords.

Defaults

Disabled

Command Modes

Global configuration mode

Supported User Roles

network-admin
vdc-admin

Command History

Release
Modification

4.0(1)

This command was introduced.


Usage Guidelines

This command requires the Enterprice Services License.

Examples

The example shows how to enable the PIM for IPv6:

switch(config)# feature pim6

switch(config)#

Related Commands

Command
Description

show ip msdp summary

Displays the summary of MSDP peers.