Cisco DCNM Fundamentals Guide, Release 6.x
Cisco DCNM Unsupported Feature List
Downloads: This chapterpdf (PDF - 83.0KB) The complete bookPDF (PDF - 4.6MB) | Feedback

Table of Contents

Cisco DCNM Unsupported Feature List

Cisco DCNM Unsupported Feature List

This appendix contains a list of features and functions not supported by CiscoDCNM or Device Manager. This list is organized according to the chapter in which the feature would be described if it were supported. (See Table 2-1 .)

 

Table 2-1 Features Not Supported by Cisco DCNM or Device Manager

Part
Chapter/Category
Procedure

2 Cisco MDS NX-OS Installation and Switch Management

Obtaining and Installing Licenses

Backing Up License Files

Moving Licences Between Switches

Initial Configuration

Starting a Switch (Initial Setup)

Configuring Console Settings

Configuring COM1 and Modem Settings

Adjusting for Daylight Savings Time

Configuring the Initialization String

Basic Switch Configuration

Terminal Settings

File System Commands

Displaying File Contents

Software Images

Manual Upgrade on a Dual Supervisor Switch

Corrupted Bootflash Recovery

Working with Configuration Files

Formatting External CompactFlash

Compressing and Uncompressing Files

Displaying the Last Lines in a File

Executing Commands Specified in a Script

Setting the Delay Time

Displaying Configuration Files

Unlocking the Startup Configuration File

Accessing Remote File Systems

Configuring High Availability

Copying Images to the Standby Supervisor

Managing System Hardware

Clock Modules

Managing Modules

Connecting to a Module

Preserving Module Configuration

Purging Module Configuration

EPLD Configuration

Configuring SSI Boot Image

Managing SSMs

3 Switch Configuration

Configuring Interfaces

Displaying the ALPA Cache Contents

Clearing the ALPA Cache

Scheduling Tasks

Schedule Configuration

4 Fabric Configuration

Inter-VSAN Routing Configuration

Inter-VSAN Routing (IVR) FICON Support

IVR Service Groups

6 IP Services

Configuring FCIP

Displaying and Clearing ARP Caches

Configuring the SAN Extension Tuner

Tuning Configuration

Configuring IP Storage

IPS Module Core Dumps

8 Network and Switch Monitoring

Monitoring Network Traffic Using SPAN

Remote SPAN

10 Troubleshooting

Troubleshooting Your Fabric

Loop Monitoring

Configuring CIM

CFS for FC Timers

Local Text Based Capture

Capturing FC Analyzer Frames Locally

Sending Captured FC Analyzer Frames to a Remote IP Address

Clearing Configured FC Analyzer Information

Displaying a List of Hosts Configured for Remote Capture

Using Fabric Analyzer Display Filters

Monitoring System Processes and Logs

Saving the Last Core to Flash

Kernel Core Dumps

System Health Initiation

Loopback Test Configuration Frequency

Hardware Failure Action

Tests for a Specified Module

Clearing Previous Error Reports

Online Health Management System

  • Enabling and Disabling the OHMS
  • Enabling and Disabling Hardware Failure Action
  • Configuring Onboard Failure Logging
  • Clearing Previous Error Reports
  • Performing Tests for a Specified Module
  • Configuring Automatic Loopback Tests
  • Performing SERDES Loopback Tests