Cisco DCNM Virtual Device Context Configuration Guide, Release 4.x
New and Changed Information
Downloads: This chapterpdf (PDF - 89.0KB) The complete bookPDF (PDF - 2.16MB) | Feedback

New and Changed Information

Table Of Contents

New and Changed Information


New and Changed Information


This chapter provides release-specific information for each new and changed feature in the Cisco DCNM Virtual Device Context Configuration Guide, Release 4.x. The latest version of this document is available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9369/products_installation_and_configuration_guides_list.html

To check for additional information about Cisco DCNM Release 4.x, see the Cisco DCNM Release Notes, Release 4.x available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9369/prod_release_notes_list.html.

summarizes the new and changed features for the Cisco DCNM Virtual Device Context Configuration Guide, Release 4.x, and tells you where they are documented.

Table 1 New and Changed Features for Release 4.x 

Feature
Description
Changed in Release
Where Documented

VDCs

No change from Release 4.1(2).

4.2(1)

IPv4 and IPv6 unicast route memory resources

Changed the default value for the maximum limits.

4.1(2)

Chapter 2, "Configuring VDC Resource Templates"

Chapter 3, "Creating VDCs"

Chapter 4, "Managing VDCs"

Multicast route memory resources

Added IPv4 and IPv6 multicast route memory resources.

4.1(2)

Chapter 2, "Configuring VDC Resource Templates"

Chapter 3, "Creating VDCs"

Chapter 4, "Managing VDCs"

Port channel resources

Changed the default value for the maximum limit.

4.1(2)

Chapter 2, "Configuring VDC Resource Templates"

Chapter 3, "Creating VDCs"

Chapter 4, "Managing VDCs"

VDC setup wizard

Added the ability to create VDC resource templates in the VDC setup wizard.

4.1(2)

Chapter 3, "Creating VDCs"

IPv4 unicast route memory resource

Changed the default maximum value from 256 to 320.

4.0(2)

Chapter 2, "Configuring VDC Resource Templates"

Chapter 3, "Creating VDCs"

Chapter 4, "Managing VDCs"

IPv6 unicast route memory resource

Changed the default maximum value from 256 to 192.

4.0(2)

Chapter 2, "Configuring VDC Resource Templates"

Chapter 3, "Creating VDCs"

Chapter 4, "Managing VDCs"