Cisco DCNM Interfaces Configuration Guide, Release 4.x
New and Changed Information
Downloads: This chapterpdf (PDF - 78.0KB) The complete bookPDF (PDF - 2.64MB) | Feedback

New and Changed Information

Table Of Contents

New and Changed Information


New and Changed Information


This chapter provides release-specific information for each new and changed feature in the Cisco DCNM Interfaces Configuration Guide, Release 4.2. The latest version of this document is available at the following Cisco website:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_2/dcnm/interfaces/configuration/guide/if_dcnm.html

To check for additional information about Cisco DCNM Release 4.x, see the Cisco DCNM Release Notes available at the following Cisco website:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_2/dcnm/release/notes/dcnm_4_2_relnotes.html

summarizes the new and changed features for the Cisco DCNM Interfaces Configuration Guide, Release 4.2, and tells you where they are documented.

Table 1 New and Changed Features for Release 4.x 

Feature
Description
Changed in Release
Where Documented

Virtual port channels (vPCs)

Allows you to configure peer-keepalive messages as well as role and system priorities using the Wizard.

4.2(1)

Chapter 6, "Configuring vPCs"

Virtual port channels (vPCs)

Added ability to configure peer-keepalive message hold time and precedence values.

4.2(1)

Chapter 6, "Configuring vPCs"

GRE tunnel interfaces in all VDCs

Allows you to create tunnel interfaces in all VDCs.

4.2(1)

Chapter 7, "Configuring IP Tunnels"

Fabric Extenders

Allows you to deploy and manage Fabric Extenders.

4.2(1)

Chapter 8, "Configuring Fabric Extenders"

SFP Diagnostic and SOLM Statistical charts

Allows you to collect and display statistical information about interfaces.

4.2(3)

Chapter 3, "Configuring Layer 2 Interfaces"