This section contains the AM messages.
Error Message AM-2-API_INIT: Failed to initialize %s API
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-API_INITIALIZE: Failed to initialize %s API with rc=0x%x, %s
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-BAD_TIMER: %s
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-CLI_INIT: Failed to initialize CLI
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-INIT_FAIL: Initialization failure
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-MQ_OPEN: Failed to open message queue %s: %s
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-MTS_BIND: Failed to do mts_bind for %s: %s
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-MTS_OPC_SET: Failed to register with opcode %d: %s
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-MTS_RECV: MTS queue receive failed on %s queue: %s
Explanation An unexpected fatal error has occurred.
Recommended Action Reload the stack.
Error Message AM-2-MTS_SADDR_GET: Failed to get source of mts queue %s: %s
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-NO_WORKBIT: Failed to register %s too many notify clients
Explanation An unexpected fatal error has occurred.
Recommended Action Report the issue to Customer Support.
Error Message AM-2-REQD_COMP_DOWN: Required component \%s\ has gone down.
Explanation An unexpected fatal error has occurred.
Recommended Action Reload the stack.
Error Message AM-2-REQD_COMP_FAIL: Required component \%s\ has failed to initialize.
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-SDB_CREAT: Failed to create shared database
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-SDB_DESTROY: Failed to destroy shared database
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-SDB_OPEN: Failed to open shared database
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-SET_SCHED: Failed to set policy or priority
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-SHM_CREAT: Failed to create shared memory: %s
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-SHM_LOCK_CREAT: Failed to create shared memory lock: %s
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-SVR_REG: Failed to register as a client of %s for VRF %s
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-SYSMGR_NAME: Failed to get name from sysmgr during %s
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-SYSMGR_NOTIFY: Bad notification from sysmgr for %s
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-SYSMGR_QUERY: Failed to query sysmgr for %s
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-SYSMGR_UUID: Failed to get uuid from sysmgr during %s
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-THR_CREAT: Failed to create thread %s: error %d
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-THREAD_FAIL: Failed to start %s thread
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-2-URIB_PIB: Unable to get pib for %s VRF from URIB
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
Error Message AM-3-ADJ_LIMIT_REACHED: Adacency limit reached %d percent of capacity for %s address family: %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Requires operator to intervene.
Error Message AM-3-BAD_PARAMS: Called %s with address family %d, iod %d, l3address %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-3-CV_INIT: Couldn't init cond var %s
Explanation AM process failed to initialize conditional-variable resource.
Recommended Action Dump core, then restart component.
Error Message AM-3-DEL_PROT_ADJ: Unable to delete protocol adjacency for %s, uuid %d
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-3-IF_INDEX: Invalid interface index received from %d
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-3-IP_GLEAN_EXCESS_TRAFFIC: Excess traffic (%llu packets / %llu octets) were dropped in %s seconds for ungleaned prefix %s/32 on interface %s in vrf %s
Explanation Informational log about a system event.
Recommended Action Keep running, do nothing special.
Error Message AM-3-IPV6_GLEAN_EXCESS_TRAFFIC: Excess traffic (%llu packets / %llu octets) were dropped in %s seconds for ungleaned prefix %s/128 on interface %s in vrf %s
Explanation Informational log about a system event.
Recommended Action Keep running, do nothing special.
Error Message AM-3-MAC_REG_FAILED: Mac registration with L2FM failed for mac %s, iod %s, phy iod: %s
Explanation Mac registration with L2FM failed.
Recommended Action Keep running, do nothing special.
Error Message AM-3-MAX_RETRIES: Notification retry limit exceeded for %s
Explanation Client is not replying to our notifications.
Recommended Action Report the issue to Customer Support.
Error Message AM-3-MQ_RECV: Message queue receive failed on %s queue: %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-3-MQ_SEND: Failed to send %s to %s queue: %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-3-MSG_TO_TLV: Notification message to TLV failed
Explanation An unexpected but recoverable error has occurred.
Recommended Action No special action is required.
Error Message AM-3-MTS_DROP: MTS drop failed on %s queue: %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-3-MTS_SEND: Failed to send %s to %s queue: %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-3-MUTEX_INIT: Couldn't init mutex %s
Explanation AM process failed to initialize mutex system resource.
Recommended Action Dump core, then restart component.
Error Message AM-3-NO_AF: %s: Unable to get address family block for index %d
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-3-NO_MEM: Malloc failed for %s %s
Explanation System may be low on memory.
Recommended Action Out of memory. Add more memory to the router.
Error Message AM-3-NO_PIB: Unable to get pib for client pid %d while processing %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-3-NO_SMEM: Smalloc failed for %s %s
Explanation AM's shared memory quota may be used up, due to large number of adjacencies or a memory leak.
Recommended Action Out of memory. Add more memory to the router.
Error Message AM-3-PROT_ADJ_COUNT: Proto adj count is already 0 for iod %d
Explanation Received invalid Adj Delete.
Recommended Action Keep running, do nothing special.
Error Message AM-3-PT_ADD: Pt_add failed for %s %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-3-PTHREAD_FAILED: pthread_create() failed for UFDM txlist thread()
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-3-QUEUE: %s failed for %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-3-READ_LOCK_HOLD: %s:%s():%d: Assert, read-lock not acquired
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-3-RIB_RTE_CHG: Failed to send AM route changes to %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-3-SHM_OPEN: Shared memory does not exist: %s
Explanation Informational log about a system event.
Recommended Action No special action is required.
Error Message AM-3-THR_MUTEX_LOCK: Failed to thread mutex lock
Explanation Failed function pthread_mutex_lock.
Recommended Action Reload the stack.
Error Message AM-3-THR_MUTEX_UNLOCK: Failed to thread mutex lock
Explanation Failed function pthread_mutex_unlock.
Recommended Action Reload the stack.
Error Message AM-3-TLV_TO_STRUCT: Notification TLV to struct failed
Explanation An unexpected but recoverable error has occurred.
Recommended Action No special action is required.
Error Message AM-3-TXLIST_CREATE: Couldn't create txlist for %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-5-INVALID_NOTIFY: Received invalid notification message
Explanation An unexpected but recoverable error has occurred.
Recommended Action No special action is required.
Error Message AM-5-MQ_MAJOR: Received unknown major message type (%d) from %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-5-MQ_MINOR: Received unknown minor message type (%d) from %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-5-MQ_UNEXP: Received unexpected message (%d/%d) on %s queue
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-5-MSG_UNK: Received unknown % type: %u
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-5-MTS_OPC_UNK: Received unknown MTS opcode %u
Explanation An unexpected but recoverable error has occurred.
Recommended Action No special action is required.
Error Message AM-5-REG_DELAY: AM register %s delay: %d seconds
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message AM-6-FAILED_STATS: Failed to retrieve stats from FTM
Explanation Informational log about a system event.
Recommended Action No special action is required.
Error Message AM-6-SYSMAN_CLEANUP: Terminated by SYSMAN cleanup signal
Explanation Informational log about a system event.
Recommended Action No special action is required.
Error Message AM-7-URIB_CNTXT: Failed to get Table_ID for %s on %s from %s (%d)
Explanation An unrecoverable software error has occurred during AM initialization.
Recommended Action Reload the stack.
This section contains the AMT messages.
Error Message AMT-2-SHM_LOCK_CREAT: Failed to create shared memory lock: %s
Explanation INITIALIZATION_FAILURE_EXPLANATION.
Recommended Action Reload the stack.
Error Message AMT-3-AMT_INIT: AMT init failed: %s
Explanation AMT process initialization failed.
Recommended Action Dump core, then restart component.
Error Message AMT-3-API_INIT: Couldn't initialize %s API
Explanation AMT failed to open API to interact with the component.
Recommended Action No special action is required.
Error Message AMT-3-BIND: bind() on %s failed: %s
Explanation AMT failed to bind UDP socket.
Recommended Action Dump core, then restart component.
Error Message AMT-3-COMP_DEREG: Unable to de-register with %s
Explanation AMT failed to de-register with a server component.
Recommended Action No special action is required.
Error Message AMT-3-COMP_REG: Unable to register with %s
Explanation AMT failed to register with a server component.
Recommended Action Dump core, then restart component.
Error Message AMT-3-DISC_NOT_ANYCAST: Relay Discovery packet from %s is addressed to %s, not an anycast address
Explanation An AMT Gateway sent Relay Discovery not using the Relay Anycast address.
Recommended Action Configure the network or router to decrease the number of routes.
Error Message AMT-3-IP_TUNNEL_LIMIT: Reach IP tunnel limit of %d
Explanation AMT process failed to create tunnel because the policy limit has been reached.
Recommended Action Configure the network or router to decrease the number of routes.
Error Message AMT-3-IPV6_TUNNEL_LIMIT: Reach IPv6 tunnel limit of %d
Explanation AMT process failed to create tunnel because the policy limit has been reached.
Recommended Action Configure the network or router to decrease the number of routes.
Error Message AMT-3-LIB_API_INIT: Couldn't initialize %s API
Explanation Failed to open AMT API to interact with the component.
Recommended Action No special action is required.
Error Message AMT-3-LIB_SM_CLOSE: Couldn't close shm segment %s
Explanation Process failed to remove shared memory resource.
Recommended Action No special action is required.
Error Message AMT-3-LIB_SM_OPEN: Couldn't open shm segment %s
Explanation Process failed to access AMT's shared memory.
Recommended Action Dump core, then restart component.
Error Message AMT-3-MALLOC: Private mem malloc (%u) failed in %s
Explanation AMT process is out of free private memory.
Recommended Action Configure the network or router to decrease the number of routes.
Error Message AMT-3-MRIB_ADD_ROUTE: MRIB add route failed in %s
Explanation AMT failed to add route in MRIB.
Recommended Action No special action is required.
Error Message AMT-3-MRIB_DEL_ROUTE: MRIB delete route failed in %s
Explanation AMT failed to delete route in MRIB.
Recommended Action No special action is required.
Error Message AMT-3-MRIB_UPDATE_ROUTE: MRIB update route failed in %s
Explanation AMT failed to update route in MRIB.
Recommended Action No special action is required.
Error Message AMT-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation AMT called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message AMT-3-MTS_RECV: Error returned from mts_recv(), errno: %s
Explanation AMT called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message AMT-3-NO_AMT_PAYLOAD: No AMT payload after stripping IP/IPv6 and UDP headers from %s, length: %d
Explanation AMT process received packet which is too short. The other side of the AMT tunnel has a protocol error.
Recommended Action Configure the network or router to decrease the number of routes.
Error Message AMT-3-NO_M_COPYBACK: m_copyack() failed in amt_receive_multicast_data()
Explanation AMT process failed to copy AMT multicast data into an mbuf for IP to replicate the packet.
Recommended Action No special action is required.
Error Message AMT-3-NO_M_GET: amt_receive_multicast_data() could allocate mbuf data structure
Explanation AMT process failed to allocate an mbuf data structure to forward AMT encapsulated data in an AMT Gateway.
Recommended Action No special action is required.
Error Message AMT-3-NO_SET_PRIORITY: Failed to set policy or priority
Explanation AMT process could not set itself process priority, exiting.
Recommended Action No special action is required.
Error Message AMT-3-PKT_BAD_NONCE: Nonce from Relay Advertisement packet from %s does not match Relay Discovery packet nonce, received 0x%08x, expected 0x%08x
Explanation There is a possible AMT spoof attack since the Advertise and Disocvery nonces do not match.
Recommended Action Configure the network or router to decrease the number of routes.
Error Message AMT-3-PKT_TOO_SHORT: Packet too short from %s
Explanation AMT process received packet which is too short. The other side of the AMT tunnel has a protocol error.
Recommended Action Configure the network or router to decrease the number of routes.
Error Message AMT-3-PT_ADD: Couldn't add %s to Patricia Trie
Explanation AMT failed to update the tunnel Patricia Trie.
Recommended Action No special action is required.
Error Message AMT-3-PT_DEL: Couldn't delete %s from local PT
Explanation AMT failed to delete the local route-table entry.
Recommended Action No special action is required.
Error Message AMT-3-PTHREAD_CREATE: Couldn't create thread %s
Explanation AMT process failed to create a task thread.
Recommended Action Dump core, then restart component.
Error Message AMT-3-RESTART_REASON: AMT process has restarted, restart reason: %s\n
Explanation AMT is restoring the routes it had added in previous instance.
Recommended Action No special action is required.
Error Message AMT-3-RLIMIT: Couldn't set AMT data segment size to %u
Explanation AMT process could not set itself memory resource limit, exiting.
Recommended Action No special action is required.
Error Message AMT-3-SETSOCKOPT: setsockopt() on %s failed: %s
Explanation AMT failed in UDP socket operation.
Recommended Action Dump core, then restart component.
Error Message AMT-3-SLAB_CREATE: Slab alloc of type %s failed
Explanation AMT process failed to allocate Slab memory.
Recommended Action Configure the network or router to decrease the number of routes.
Error Message AMT-3-SM_CREATE: Couldn't create shm segment %s
Explanation AMT process failed to initialize shared memory resource.
Recommended Action Dump core, then restart component.
Error Message AMT-3-SMALLOC: Shared mem malloc (%u) failed in %s
Explanation AMT process is out of free shared memory.
Recommended Action Configure the network or router to decrease the number of routes.
Error Message AMT-3-SOCKET: socket() for %s failed: %s
Explanation AMT failed to obtain UDP socket.
Recommended Action Dump core, then restart component.
Error Message AMT-3-TIMER_SET_INIT: Couldn't init %s active timer set
Explanation AMT failed to initialize timer resource.
Recommended Action Dump core, then restart component.
Error Message AMT-3-TUNNEL_FAILED: Could not allocate shared-memory for amt_tunneltype data structure
Explanation AMT process failed to create data structure to establish tunnel.
Recommended Action Configure the network or router to decrease the number of routes.
Error Message AMT-3-UDP_SENDTO: udp_sendto() failed to %s in %s, error: %s
Explanation AMT failed to send over UDP socket.
Recommended Action No special action is required.
Error Message AMT-3-UNKNOWN_MTYPE: Unknown mtype: %d/%d in %s
Explanation AMT process received unknown Interprocess message, dropped.
Recommended Action No special action is required.
Error Message AMT-6-RESTART_SHUTDOWN: AMT shutting self down via restart command
Explanation AMT process is shutting itself down due to the restart command.
Recommended Action No special action is required.
Error Message AMT-6-SHUTDOWN_SELF: AMT shutting self down
Explanation AMT process is shutting itself down.
Recommended Action No special action is required.
Error Message AMT-6-SHUTDOWN: Shutting down AMT process
Explanation PIM received a shutdown request.
Recommended Action No special action is required.
Error Message AMT-6-UNKNOWN_OPC: Received unknown mts opcode %d
Explanation AMT process received unknown Interprocess message, dropped.
Recommended Action No special action is required.
This section contains the ARP messages.
Error Message ARP-2-AM_PIB: Failed to acquire AM handle %s
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-2-AM_REG: Failed to register as a client of AM %s
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-2-API_INIT: Failed to initialize %s API
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-2-API_INITIALIZE: Failed to initialize %s API with rc=0x%x, %s
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-2-CLI_INIT: Failed to initialize CLI
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-2-DUP_SRC_IP: Source address of packet received from %s on %s(%s) is duplicate of local, %s
Explanation There may be another router on this network that is configured with the same IP address.
Recommended Action Check all routers on the interface for misconfiguration.
Error Message ARP-2-DUP_SRCIP: Source address of packet received from %s on %s is duplicate of local, %s
Explanation There may be another router on this network that is configured with the same IP address.
Recommended Action Check all routers on the interface for misconfiguration.
Error Message ARP-2-INIT_FAIL: Initialization failure
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-2-MQ_OPEN: Failed to open message queue %s: %s
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-2-MQ_RECV: Message queue receive failed on %s queue: %s
Explanation An unexpected fatal error has occurred.
Recommended Action Reload the stack.
Error Message ARP-2-MTS_BIND: Failed to do mts_bind for %s: %s
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-2-MTS_OPC_SET: Failed to register with opcode %d: %s
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-2-MTS_RECV_FAIL: %s as MTS queue receive failed: %s
Explanation An unexpected fatal error has occurred.
Recommended Action Reload the stack.
Error Message ARP-2-MTS_RECV: MTS queue receive failed on %s queue: %s
Explanation An unexpected fatal error has occurred.
Recommended Action Reload the stack.
Error Message ARP-2-SET_SCHED: Failed to set policy or priority
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-2-SHM_CREAT: Failed to create %s shared memory
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-2-SVR_REG: Failed to register as a client of %s
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-2-SYSMGR_NOTIFY: Bad notification from sysmgr for %s
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-2-SYSMGR_QUERY: Failed to query sysmgr for %s
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-2-SYSMGR_UUID: Failed to get uuid from sysmgr during %s
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-2-THR_CREAT: Failed to create thread %s: error %d
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-2-THREAD_FAIL: Failed to start %s thread
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-2-TIMER_SET: Failed to initialize new timer set
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-2-TIMERS_INIT: Failed to initialize timers
Explanation An unrecoverable software error has occurred during arp initialization.
Recommended Action Reload the stack.
Error Message ARP-3-ADJ_ADD_CONTROL: Failed to add adjacency by contol plane. Host ip address : %s
Explanation Due to this failure, Traffic forwarding to the host may be affected.
Recommended Action No special action is required.
Error Message ARP-3-ADJ_ADD_PEER_SYNC: Failed to add PS adjacency from L2RIB. Host ip address : %s
Explanation Due to this failure, Traffic forwarding to the host may be affected.
Recommended Action No special action is required.
Error Message ARP-3-ADJ_ADD: Failed to add adjacency for received packet from %s on %s
Explanation Due to this failure, packet forwarding to this address will be affected until the next successful retrial.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-ADJ_DEL_CONTROL: Failed to delete adjacency by contol plane. Host ip address : %s
Explanation Due to this failure, Traffic forwarding to the host continue to happen.
Recommended Action No special action is required.
Error Message ARP-3-ADJ_DEL_PEER_SYNC: Failed to delete PS adjacency from L2RIB. Host ip address : %s
Explanation Due to this failure, Traffic forwarding to the host continue to happen.
Recommended Action No special action is required.
Error Message ARP-3-ADJ_UPD: Failed to update adjacency for received packet from %s on %s
Explanation Due to this failure, packet forwarding will continue to use the existing ARP adjacency entry values.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-API_MQ_INVAL: ARP API Error: Invalid ARP message queue in %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action No special action is required.
Error Message ARP-3-API_MQ_SEND: ARP API Error: Failed to send %s to %s queue: %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action No special action is required.
Error Message ARP-3-API_MTS_INVAL: ARP API Error: Invalid ARP MTS queue in %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action No special action is required.
Error Message ARP-3-API_MTS_SEND: ARP API Error: Failed to send %s to %s queue: %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action No special action is required.
Error Message ARP-3-COUNT_MISMATCH: Mismatch between calculated and received adjacencies: Calculated:%d and Received:%d
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-DAI_FETCH_ERR: DAI lookup failed, callback function returned 0x%x (%s) for %s %s
Explanation DAI lookup failed.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-DUP_VADDR_SRC_IP: Source address of packet received from %s on %s(%s) is duplicate of local virtual ip, %s
Explanation There may be another router on this network that is configured with the same IP address.
Recommended Action Check all routers on the interface for misconfiguration.
Error Message ARP-3-DUP_VADDR_SRCIP: Source address of packet received from %s on %s is duplicate of local virtual ip, %s
Explanation There may be another router on this network that is configured with the same IP address.
Recommended Action Check all routers on the interface for misconfiguration.
Error Message ARP-3-DUP_VIRT_SRC_IP: Source address of packet received from %s on %s(%s) is duplicate of local virtual ip, %s
Explanation There may be another router on this network that is configured with the same IP address.
Recommended Action Check all routers on the interface for misconfiguration.
Error Message ARP-3-DUP_VIRT_SRCIP: Source address of packet received from %s on %s is duplicate of local virtual ip, %s
Explanation There may be another router on this network that is configured with the same IP address.
Recommended Action Check all routers on the interface for misconfiguration.
Error Message ARP-3-GRAT_ETH: Sending gratuitous arp for %s on invalid interface %s, not ethernet
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-GRAT_IOD: Sending gratuitous ARP for %s on an invalid interface %u
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-GRAT_IP: Sending gratuitous ARP request for %s IP address %s on %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-GRAT_NON_AM: Sending gratuitous arp for %s on invalid interface %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-GRAT_P2P: Sending gratuitous arp for %s on invalid interface %s, point-to-point
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-HDR_ERR: Failed to get ARP header, expected %d, got %d bytes
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-HDR_L2LEN_ERR: Received packet with incorrect layer 2 address length (%d bytes), %s with S/D MAC: %s %s eff_ifc %s(%ld), log_ifc %s(%ld), phy_ifc %s(%ld)
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-HDR_L3LEN_ERR: Received packet with incorrect layer 3 address length (%d bytes)
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-IF_INDEX: Invalid interface index received from %d
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-IM_EXT: Couldn't set IM-extension for interface %s
Explanation ARP process failed to set IM extension.
Recommended Action No special action is required.
Error Message ARP-3-INVAL_HDR_HRD_TYPE: Found incorrect hardware type in ARP header: %hu, source-mac : %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-INVAL_HDR_PROT_TYPE: Found incorrect protocol type in ARP header: 0x%x
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-INVAL_STATE: Unrecognized ARP entry state in timer callback: %u
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-MAC_ERR: Failed to get MAC address on %s for %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action No special action is required.
Error Message ARP-3-MBUF_ERR: Failed to get the remainder of packet, expected %d, got %d bytes
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-MTS_DROP: MTS drop failed on %s queue: %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-NO_MBUF: Failed to allocate buffer for %s
Explanation The system may have run out of packet memory buffers.
Recommended Action Report the issue to Customer Support.
Error Message ARP-3-NO_MEM: Malloc failed for %s %s
Explanation The system may be low on memory.
Recommended Action Out of memory. Add more memory to the router.
Error Message ARP-3-NO_SMEM: Shared memory allocation failed for %s %s
Explanation ARP Shared memory might be used up.
Recommended Action Out of memory. Add more memory to the router.
Error Message ARP-3-PKT_ENCAP: Failed to encapsulate packet
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-PKT_OUT: Failed to send packet to PM
Explanation PM's message queue may be temporarily full.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-REQ_ADD: Failed to add adjacency while sending request for %s on %s, request from pid: %d
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-REQ_ETH: Sending ARP request for %s on invalid interface %s, not ethernet, request from pid: %d
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-REQ_IOD: Sending ARP request for %s on an invalid interface %u, request from pid: %d
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-REQ_IP: Dropping ARP request for %s IP address %s on %s, request from pid: %d
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-TIMER_RSTART: Failed to restart timer 0x%p for %s on %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action No special action is required.
Error Message ARP-3-VRRP_ETH: Adding vrrp arp for %s: invalid interface %s, not ethernet
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-VRRP_IOD: Adding vrrp arp for %s: invalid interface %u
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-VRRP_NON_AM: Sending vrrp arp for %s on invalid interface %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-VRRP_P2P: Sending vrrp arp for %s on invalid interface %s, point-to-point
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-VRRPQ_ADD: Failed to add VRRP queue entry for %s, %s on %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-3-VRRPQ_IP: Trying to add invalid IP address %s on %s to vrrp queue
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-4-DIR_BCAST: %s address of packet received from %s on %s matches directed broadcast address, %s
Explanation There may be a configured subnet mask-length mismatch among router interfaces connected on this LAN.
Recommended Action Check all routers on the interface for misconfiguration.
Error Message ARP-4-DUP_IP: ARP entry found with duplicate IP address %s on %s
Explanation There may be another router on this network that is configured with the same IP address.
Recommended Action Check all routers on the interface for misconfiguration.
Error Message ARP-4-INVAL_IP: Received packet with invalid %s IP address (%s) from %s on %s
Explanation There may be a connected router sending packets with a bogus IP address.
Recommended Action Check all routers on the interface for misconfiguration.
Error Message ARP-4-INVAL_MAC: Received packet with invalid %s MAC address (%s) from %s on %s
Explanation There may be a connected router sending packets with a bogus MAC address.
Recommended Action Check all routers on the interface for misconfiguration.
Error Message ARP-4-OWN_SRCMAC: Received packet with a local source MAC address (%s) from %s on %s
Explanation There may be a connected router sending packets with local MAC address.
Recommended Action Check all routers on the interface for misconfiguration.
Error Message ARP-5-MQ_MINOR: Received unknown minor message type (%d) from %s
Explanation An unexpected but recoverable error has occurred.
Recommended Action No special action is required.
Error Message ARP-5-MQ_UNEXP: Received unexpected message (%d/%d) on %s queue
Explanation An unexpected but recoverable error has occurred.
Recommended Action No special action is required.
Error Message ARP-5-MSG_UNK: Received unknown % type: %u
Explanation An unexpected but recoverable error has occurred.
Recommended Action No special action is required.
Error Message ARP-5-MTS_OPC_UNK: Received unknown MTS opcode %u
Explanation An unexpected but recoverable error has occurred.
Recommended Action No special action is required.
Error Message ARP-5-UNK_IP_NOTIF: Unrecognized IP address change notification type %u
Explanation An unexpected but recoverable error has occurred.
Recommended Action No special action is required.
Error Message ARP-5-UNK_MSG_MINOR: Unrecognized %s message minor type %d
Explanation An unexpected but recoverable error has occurred.
Recommended Action No special action is required.
Error Message ARP-5-UNK_SIG: Received unknown signal %d
Explanation An unexpected but recoverable error has occurred.
Recommended Action No special action is required.
Error Message ARP-6-REQ_NON_AM: Sending ARP request for %s on invalid interface %s request from pid: %d
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-6-REQ_P2P: Sending ARP request for %s on invalid interface %s, point-to-point, request from pid: %d
Explanation An unexpected but recoverable error has occurred.
Recommended Action Keep running, do nothing special.
Error Message ARP-6-SYSMAN_CLEANUP: Terminated by SYSMAN cleanup signal
Explanation Informational log about a system event.
Recommended Action No special action is required.
This section contains the ATIMERS messages.
Error Message ATIMERS-3-ERROR: %s
Explanation An active timer API returned error. Parameters are: Error
Recommended Action No special action is required.
Error Message ATIMERS-3-OPER: timer failed to %s, error %s
Explanation An active timer API returned error. Parameters are: timer operation, reason
Recommended Action No special action is required.
Error Message ATIMERS-3-START: starting timer 0x%p: heap not allocated for set id %u
Explanation An active timer API returned error. Parameters are: timer, Set ID
Recommended Action No special action is required.
Error Message ATIMERS-3-STOP: stopping timer 0x%p: heap not allocated for set id %u\n
Explanation An active timer API returned error. Parameters are: timer, Set ID
Recommended Action No special action is required.
This section contains the EIGRP messages.
Error Message EIGRP-2-ALLOC_URIB_ADD: eigrp_smalloc() failed for URIB add-route buffer
Explanation Failed to allocate URIB add-route buffer.
Recommended Action Configure the network or router to decrease the number of routes, or add additional memory to the router.
Error Message EIGRP-2-ALLOC_URIB_DEL: eigrp_smalloc() failed for URIB delete-route buffer
Explanation Failed to allocate URIB delete-route buffer.
Recommended Action Configure the network or router to decrease the number of routes, or add additional memory to the router.
Error Message EIGRP-2-API_INIT: Couldn't initialize %s API
Explanation EIGRP failed to open API to interact with the component. Parameters are: API name
Recommended Action Kill component and don't restart it.
Error Message EIGRP-2-BFD_API_FAIL: bfd_send_remove_sessions
Explanation Failed to send bfd remove sessions.
Recommended Action No special action is required.
Error Message EIGRP-2-BFD_CREATE_SESSION_FAILED: BFD Session create failed.
Explanation Failed to create BFD session.
Recommended Action No special action is required.
Error Message EIGRP-2-CIB_CREATE_FAIL: eigrp_create_cib failed for context %s
Explanation Failed to create specified context. Parameters are: Context name
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-CLEANUP_DREG: Failed to deregister with %s during eigrp_cleanup()
Explanation Failed to deregister with specified service during process shutdown. Parameters are: Service name
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-CLI_INIT_FAILED: cli_init() failed in eigrp_init_cli()
Explanation EIGRP could not register with the CLI server process.
Recommended Action Kill component and don't restart it.
Error Message EIGRP-2-ERR_FREEBUF: Illegal memory free in function %s
Explanation Illegal memory free detected. Parameters are: Function
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-ERR_URIB_TID: Can't determine context from URIB table id %d
Explanation Failed to determine context from URIB table id. Parameters are: Table id
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-ILL_FUNCCALL: Illegal call to function %s
Explanation Illegal call to specified function. Parameters are: Function
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-ILL_POLICY_TYPE: Illegal policy type in %s()
Explanation Illegal policy type in specified rpm callback. Parameters are: Function
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-ILL_WORKTYPE: Illegal work type %d ipigrp2_process_workq()
Explanation Worker thread received illegal work type. Parameters are: Work type
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-ILLEGAL_TIMER_ID: Illegal timer-id used in mgd_timer_init_leaf(), timer-id: %d
Explanation Illegal timer id was specified. Parameters are: Managed timer id
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-IM_GET_NAME_FAILED: im_get_if_name failed for iod (%u) with error (%d)
Explanation EIGRP could not get if_name from Interface Manager.
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-IM_REG_FAILED: im_register_client() failed in eigrp_init_im()
Explanation EIGRP could not register with the IM process.
Recommended Action Kill component and don't restart it.
Error Message EIGRP-2-INIT: %s failed
Explanation EIGRP process initialization failed. Parameters are: Init function
Recommended Action Kill component and don't restart it.
Error Message EIGRP-2-IP_MCAST_JOIN_FAILED: Unable to join ip mcast group for interface: %s. Please unconfigure and configure it again.
Explanation EIGRP could not join mcast group for the interface. Parameters are: Interface
Recommended Action ACTION_OPERATOR_RETRY.
Error Message EIGRP-2-IP_REG_FAILED: ip_register() failed in eigrp_init_ip()
Explanation EIGRP could not register with the IP process.
Recommended Action Kill component and don't restart it.
Error Message EIGRP-2-L3VM_SOO_NOTIF: l3vm_get_if_soo_info failed for interface %s
Explanation EIGRP could not get SoO from L3VM for.
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-MGD_TIMER_CREATE_FAIL: Failed to create managed timer %d
Explanation Failed to create specified managed timer. Parameters are: Managed timer id
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-MTS_BIND: mts_bind() failed in binding %s mts_q, error %s
Explanation Failed in binding to specified mts queue with error. Parameters are: MTS queue name, Error string
Recommended Action Kill component and don't restart it.
Error Message EIGRP-2-MTS_REQ_FM_STATUS: Failed in mts_register of MTS_OPC_FM_SRV_FEATURE_STATUS
Explanation Failed to request feature status notification.
Recommended Action Kill component and don't restart it.
Error Message EIGRP-2-MTSBIND: Unable to bind to MTS SAP for %s, sap %d: %s
Explanation EIGRP was not able to create a message queue for communication. Parameters are: Queue name, MTS SAP, Error
Recommended Action Restart component.
Error Message EIGRP-2-NO_MEMORY: Can't allocate memory in function %s
Explanation Can't allocate memory in specified function. Parameters are: Function
Recommended Action Out of memory. Add more memory to the router.
Error Message EIGRP-2-NO_SET_PRIORITY: Failed to set policy or priority
Explanation EIGRP process could not set itself process priority, exiting.
Recommended Action Kill component and don't restart it.
Error Message EIGRP-2-PROCINFO_CREATE_FAIL: eigrp_procinfo creation failed
Explanation Failed to create procinfo.
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-PTHREAD_FAILED: %s failed in %s for thread %s
Explanation EIGRP process failed to create a task thread. Parameters are: Pthread operation, Function, Thread name
Recommended Action Kill component and don't restart it.
Error Message EIGRP-2-REG_L3VM: Failed to register with l3vm
Explanation Failed to register with the l3vm process.
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-REG_OPCODE: Could not register opcode 0x%x, reason %s
Explanation Could not register mts opcode with reason. Parameters are: Opcode, Reason
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-RLIMIT_FAILED: Couldn't set data segment size to %u
Explanation EIGRP process could not set its memory resource limit, exiting. Parameters are: Data segment size
Recommended Action Kill component and don't restart it.
Error Message EIGRP-2-RPM_L3VPN_API: RPM_L3VPN_API failed : %s
Explanation EIGRP call tp RPM L3VPN API failed.
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-SBCR_INIT: Could not initialize shared database client, rc=0x%x [%s]
Explanation Failed to initialize shared database client with return error code. Parameters are: Error code, Error string
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-TIMER_CREATE_FAIL: Failed to create %s active timer
Explanation Failed to create specified active timer. Parameters are: Active timer name
Recommended Action Kill component and don't restart it.
Error Message EIGRP-2-TIMER_SET_INIT: Couldn't init %s active timer set
Explanation EIGRP failed to initialize timer resource. Parameters are: Timer set name
Recommended Action Kill component and don't restart it.
Error Message EIGRP-2-URIB_ACK_ERROR: URIB ack not processed for transaction id %d
Explanation EIGRP could not find the xid for URIB ack.
Recommended Action No special action is required.
Error Message EIGRP-2-URIB_ADD_ROUTE: urib_add_route() failed
Explanation Failed to add routes to URIB.
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-URIB_DEREGISTER: Could not deregister with the URIB in %s
Explanation EIGRP could not deregister with URIB in specified function. Parameters are: Function
Recommended Action Kill component and don't restart it.
Error Message EIGRP-2-URIB_REDIST_LIMIT_WARNING: Redistribute threshold limit reached: %d%%.
Explanation EIGRP has reached the configured redistribute maximum-prefix threshold. Parameters are: Threshold
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-URIB_REGISTER: EIGRP could not register with the URIB
Explanation At initialization time, EIGRP could not register with the URIB process.
Recommended Action Kill component and don't restart it.
Error Message EIGRP-2-URIB_RT_MOD_INIT: URIB_RT_MOD_INIT failed
Explanation EIGRP call tp URIB_RT_MOD_INIT API failed.
Recommended Action Kill component and don't restart it.
Error Message EIGRP-2-URIB_SEND_BUFFER: urib_rt_mod_send() failed
Explanation Failed to send add/delete buffer to URIB.The RIB and topology table might be inconsistent.Try restarting EIGRP to clear the issue.
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-2-VERIFY_PTAG: Could not verify process tag with sysmgr
Explanation Could not verify process tag with sysmgr.
Recommended Action Kill component and don't restart it.
Error Message EIGRP-3-ANCHORCOUNT_DUAL: Anchor count negative
Explanation A software or hardware error occurred.
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-3-BADCOUNT_DUAL: Route %s, %d successors, %d rdbs
Explanation A software or hardware error occurred. Parameters are: Route, Number of feasible successors, Number of successors
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-3-BFD_SEND_AUTO_EXPIRY: Unable to start BFD staling, error %s
Explanation EIGRP BFD staling API failed. Parameters are: Error string
Recommended Action Dump core, then restart component.
Error Message EIGRP-3-BUFFER_OVERFLOW: Buffer overflow: %s
Explanation Buffer overflow while writing EIGRP community.
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-3-CMI_NO_VRF_ERR: CMI error: No %s VRF information found
Explanation CMI returned an error. Parameters are: Error
Recommended Action Keep running, do nothing special.
Error Message EIGRP-3-DUP_ADDR: Duplicate address %s detected on interface %s
Explanation The same IP address was configured on two EIGRP routers on the same subnet. Parameters are: IP address, Interface
Recommended Action ACTION_EIGRP_DUP_ADDR.
Error Message EIGRP-3-FEATURE_STATUS: %s status error: 0x%08x\n
Explanation FM get feature status failed.
Recommended Action Keep running, do nothing special.
Error Message EIGRP-3-GR_OFF_DURING_UPG: Attempt to upgrade system with graceful-restart off.
Explanation Attempt to upgrade system with graceful-restart off.
Recommended Action ACTION_EIGRP_ENABLE_GR.
Error Message EIGRP-3-INTERNAL_DUAL: %s %d: Internal Error
Explanation EIGRP internal DUAL finite state error. Parameters are: DUAL descriptor block name, Autonomous system number
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation EIGRP called a MTS API which returned an error. Parameters are: Error string
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-3-MTS_RECV: Error returned from mts_recv(), errno: %s
Explanation EIGRP called a MTS API which returned an error. Parameters are: Error string
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-3-MTS_REGISTER: mts_register failed for EIGRP: %s
Explanation EIGRP was unable to register an MTS notification.
Recommended Action No special action is required.
Error Message EIGRP-3-MTSDROP: MTS drop failed on %s queue: %s
Explanation EIGRP_EXPL_UNEXPECTED_EVENT. Parameters are: Queue name, Error
Recommended Action Report the issue to Customer Support.
Error Message EIGRP-3-MTSRECV: MTS receive failed on %s queue: %s
Explanation EIGRP_EXPL_UNEXPECTED_EVENT. Parameters are: Queue name, Error
Recommended Action Keep running, do nothing special.
Error Message EIGRP-3-MTSSEND: MTS send() error to SAP %d, opcode %d: %s
Explanation EIGRP_EXPL_UNEXPECTED_EVENT. Parameters are: MTS SAP, MTS Opcode, Error
Recommended Action Report the issue to Customer Support.
Error Message EIGRP-3-MULTIFLOW_DUAL: Flow control error, %s, on %s
Explanation A software or hardware error occurred. Parameters are: Error description, Interface
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-3-NOHANDLE_DUAL: Handle %d is not allocated in pool.
Explanation A software or hardware error occurred. Parameters are: Peer handle
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-3-PEERSEXIST_DUAL: %d peers exist on IIDB %s
Explanation A software or hardware error occurred. Parameters are: Peer count, Interface
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-3-PFXLIMIT_DUAL: %s %d %s prefix limit exceeded
Explanation Prefix limit threshold exceeded. Parameters are: DUAL descriptor block name, Autonomous system number, Prefix type
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-3-PFXLIMITTHR_DUAL: %s %d %s reached prefix limit threshold
Explanation Prefix limit threshold reached. Parameters are: DUAL descriptor block name, Autonomous system number, Prefix type
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-3-PROBESEQ_DUAL: Bad probe sequence %d from %s, expecting %d
Explanation A software or hardware error occurred. Parameters are: Probe seq no received, Peer, Expected seq no
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-3-RDBLEFT_DUAL: dest %s, nexthop %s (%s), origin %s
Explanation A software or hardware error occurred. Parameters are: Route, Next hop, IntefaceOrigin
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-3-REFCOUNT_DUAL: Negative refcount in pakdesc %x
Explanation A software or hardware error occurred. Parameters are: Packet descriptor
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-3-RPM_REDIST_INIT: Couldn't initialize redistribution API for %s
Explanation EIGRP failed to open API to interact with the component. Parameters are: Redistributed client
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-3-SIA_DUAL: Route %s stuck-in-active state in %s %d. Cleaning up
Explanation EIGRP route stuck-in-active, cleanup happened. Parameters are: Route, DUAL descriptor block name, Autonomous system number
Recommended Action No special action is required.
Error Message EIGRP-3-SYSMGR_DISPATCH: Error returned from sysmgr_dispatch(), errno: %s
Explanation EIGRP called a System Manager API which returned an error. Parameters are: Error string
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-3-SYSMGR_QUERY: Sysmgr state query failed for uuid %d, tag %s
Explanation A software or hardware error occurred. Parameters are: Service UUID, Process Tag
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-3-UNKNOWN_MTYPE: Unknown mtype: %d/%d in %s
Explanation EIGRP process received unknown Interprocess message, dropped. Parameters are: Message major type, Message minor type, Function
Recommended Action No special action is required.
Error Message EIGRP-3-UNKTIMER_DUAL: Unknown timer type %d expiration
Explanation A software or hardware error occurred. Parameters are: Managed timer id
Recommended Action ACTION_EIGRP_SEND_LOG.
Error Message EIGRP-4-MQUNEXPECT: Recieved unexpected message (%d/%d) on %s queue
Explanation EIGRP_EXPL_UNEXPECTED_EVENT.
Recommended Action Report the issue to Customer Support.
Error Message EIGRP-4-MTSNOMSG: No MTS payload found on %s queue, opc %d
Explanation EIGRP_EXPL_UNEXPECTED_EVENT. Parameters are: Queue name, MTS Opcode
Recommended Action Report the issue to Customer Support.
Error Message EIGRP-4-MTSUNKOPC: Received unknown MTS message on %s queue, opc %d
Explanation EIGRP_EXPL_UNEXPECTED_EVENT. Parameters are: Queue name, MTS Opcode
Recommended Action Report the issue to Customer Support.
Error Message EIGRP-4-PICOSEC_WARN: ip delay eigrp command accepted but did not take effect in 32 bit version mode
Explanation The command was issued when in 32bit metric version mode.
Recommended Action No special action is required.
Error Message EIGRP-5-EVENT_DUAL: %s, %s
Explanation DUAL event log message. Parameters are: DUAL descriptor block name, Log message
Recommended Action No special action is required.
Error Message EIGRP-5-HA_INFO: EIGRP HA info msg - %s
Explanation EIGRP received a HA info msg. Parameters are: Message
Recommended Action No special action is required.
Error Message EIGRP-5-NBRCHANGE_DUAL: %s %d: Neighbor %s (%s) is %s: %s
Explanation A neighbor went up or down. Parameters are: DUAL descriptor block name, Autonomous system number, Peer, Interface, State, Reason
Recommended Action No special action is required.
Error Message EIGRP-5-SHUTDOWN: Shutting down EIGRP process - %s
Explanation EIGRP received a shutdown request. Parameters are: Reason
Recommended Action No special action is required.
Error Message EIGRP-6-UNEQUAL_METRICS: EIGRP: Unequal metric (%s), delay [%llu/%llu], bandwidth [%llu/%llu] , mtu [%u/%u], hopcount [%u/%u], reliability [%u/%u], load [%u/%u]
Explanation Unequal metrics detected and log-neighbor-warnings is enabled. Parameters are: Route, Delay1, Delay2, Bandwidth1, Bandwidth2, Mtu1, Mtu2, Hopcount1, Hopcount2, Reliability1Reliability2, Load1, Load2
Recommended Action ACTION_EIGRP_SEND_LOG.
This section contains the FTM messages.
Error Message FTM-3-ERR_CFGFAILED: %s
Explanation Configuration Error.
Recommended Action Report the issue to Customer Support.
Error Message FTM-3-ERR_HWNOMEM: %s
Explanation H/W Mem Allocation Err.
Recommended Action Report the issue to Customer Support.
Error Message FTM-3-ERR_HWWRITE: %s
Explanation H/W Write Error.
Recommended Action Report the issue to Customer Support.
Error Message FTM-3-ERR_INTERNAL: %s
Explanation Internal Error.
Recommended Action Report the issue to Customer Support.
Error Message FTM-3-ERR_IPCFAILED: %s
Explanation IPC failure.
Recommended Action Keep running, do nothing special.
Error Message FTM-3-ERR_NOACTION: %s
Explanation Internal Data structure error.
Recommended Action Keep running, do nothing special.
Error Message FTM-3-ERR_SWNOMEM: %s
Explanation S/W Mem Error.
Recommended Action Report the issue to Customer Support.
Error Message FTM-3-WARN_INTERNAL: %s
Explanation Internal Warning.
Recommended Action Keep running, do nothing special.
This section contains the HEAP messages.
Error Message HEAP-3-HEAP_ERROR: %s
Explanation Heap routing library error.
Recommended Action No special action is required.
Error Message HEAP-4-HEAP_WARNING: %s
Explanation Heap malloc warning.
Recommended Action No special action is required.
This section contains the ICMPv6 messages.
Error Message ICMPv6-2-MALLOC_FAILED: malloc() failed for allocating %s in %s()
Explanation ICMPv6 process is out of heap memory. This could be due to temporary increase in the number of static or dynamic Neighbor Cache Entries(NCEs) to a very high value.
Recommended Action Keep running, do nothing special.
Error Message ICMPv6-3-ADJ_ADD: Failed to add adjacency for received packet from %s on %s
Explanation Due to this failure, packet forwarding to this address will be affected until the next successful retrial.
Recommended Action No special action is required.
Error Message ICMPv6-3-API_FAILED: %s failed in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message ICMPv6-3-API_INIT_FAILED: %s failed in %s() with rc=0x%x, %s
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message ICMPv6-3-API_INTERFACE_FAILED: %s failed for %s in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message ICMPv6-3-BAD_INFO_RECEIVED: Invalid %s message type %d received in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message ICMPv6-3-BITFIELD_FAILED: %s failed in %s
Explanation ICMPV6 process could not execute the bitfield operation. Parameters are: Bitfield operation, Function name
Recommended Action Dump core, then reload the stack.
Error Message ICMPv6-3-COUNT_MISMATCH: Mismatch between calculated and received adjacencies: Calculated:%d and Received:%d
Explanation UNEXPECTED_ERROR_EXPLANATION.
Recommended Action Keep running, do nothing special.
Error Message ICMPv6-3-CV_INIT: Couldn't init cond var %s
Explanation ICMPV6 process failed to initialize conditional-variable resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message ICMPv6-3-FHRP_CTXT: Adding virtual ipv6 address for %s: non-ipv6 enabled interface %s in context %d
Explanation UNEXPECTED_ERROR_EXPLANATION.
Recommended Action No special action is required.
Error Message ICMPv6-3-GROUP_PREFIX_IGNORE: Too many Groups in Group Prefix %s. Specify the prefix within /120
Explanation GPrefix yields too many Groups. Parameters are: Group Prefix
Recommended Action No special action is required.
Error Message ICMPv6-3-GROUP_RANGE_IGNORE: Too many Groups in Group Range %s - %s
Explanation Group Range yields too many Groups. Parameters are: Start Group, End Group
Recommended Action No special action is required.
Error Message ICMPv6-3-IF_INDEX: Invalid interface index received from %d
Explanation UNEXPECTED_ERROR_EXPLANATION.
Recommended Action Keep running, do nothing special.
Error Message ICMPv6-3-MBUF_OP_FAILED: %s for size %d failed in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message ICMPv6-3-MQ_FAILED_NAME: %s failed for client %s, errno: %s in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message ICMPv6-3-MQ_FAILED_PID: %s failed to client pid: %d, errno: %s in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message ICMPv6-3-MQ_FAILED: %s failed, errno: %s in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message ICMPv6-3-MSG_TO_TLV: TLV Conversion failed (%d)
Explanation TLV conversion failed.
Recommended Action Report the issue to Customer Support.
Error Message ICMPv6-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation ICMPv6 called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message ICMPv6-3-MTS_FAILED_NAME: %s failed for client %s, errno: %s in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message ICMPv6-3-MTS_FAILED_PID: %s failed to client pid: %d, errno: %s in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message ICMPv6-3-MTS_FAILED: %s failed, errno: %s in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message ICMPv6-3-MTS_RECV: Error returned from mts_recv(), errno: %s
Explanation ICMPv6 called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message ICMPv6-3-MUTEX_INIT: Couldn't init mutex %s
Explanation ICMPV6 process failed to initialize mutex system resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message ICMPv6-3-ND_LOG: %s
Explanation Neighbor Discovery process found erroneous configuration on the network.
Recommended Action No special action is required.
Error Message ICMPv6-3-ND_RA_LOG: %s
Explanation Network configuration information obtained from Neighbor Discovery - Router Acknowledgement(RA) packet.
Recommended Action No special action is required.
Error Message ICMPv6-3-PACKET_LENGTH_ERROR: ICMPv6 packet from %s is smaller than payload length of %d bytes:%s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message ICMPv6-3-PT_ADD: Couldn't add element to PT %s
Explanation ICMPv6 failed to update the local database entry. Parameters are: Patricia tree name
Recommended Action No special action is required.
Error Message ICMPv6-3-PT_DEL: Couldn't delete element from PT %s
Explanation ICMPv6 failed to delete the local database entry. Parameters are: Patricia tree name
Recommended Action No special action is required.
Error Message ICMPv6-3-RESERVE_LIMIT: Exceeded reserve-limit for interface %s - dropping
Explanation Exceeded 80 percent of the reserve-limit for interface. Parameters are: Interface
Recommended Action No special action is required.
Error Message ICMPv6-3-STATE_LIMIT: Exceeded state-limit for interface %s - dropping
Explanation Exceeded 80 percent of the state-limit for interface. Parameters are: Interface
Recommended Action No special action is required.
Error Message ICMPv6-3-SYSMGR_DISPATCH: Error returned from sysmgr_dispatch(), errno: %s
Explanation ICMPv6 called a System Manager API which returned an error.
Recommended Action Dump core, then restart component.
Error Message ICMPv6-3-TIMER_FAILED: %s failed for %s in %s
Explanation
Recommended Action
Error Message ICMPv6-3-TLV_TO_STRUCT: TLV to Struct Conversion failed (%d)
Explanation TLV to Struct conversion failed.
Recommended Action Report the issue to Customer Support.
Error Message ICMPv6-3-TXLIST_CREATE: Couldn't create txlist for %s
Explanation ICMPV6 failed to create txlist resource. Parameters are: Data type
Recommended Action Dump core, then restart component.
Error Message ICMPv6-3-VRF_CREATE: ICMPv6 VRF creation failed for vrf %s
Explanation ICMPv6 process could not create the VRF context. Parameters are: VRF name
Recommended Action Dump core, then reload the stack.
Error Message ICMPv6-4-M6RIB_SM_ADDR: M6RIB shared memory not valid for mtype:%d, xid:%d, count:%d
Explanation M6RIB shared memory being accesses is not valid.
Recommended Action No special action is required.
Error Message ICMPv6-4-MTS_QUEUE_NOT_INITIALIZED: %s mts queue not intialized
Explanation ICMPV6_UNEXPECTED_EXPLANATION.
Recommended Action No special action is required.
Error Message ICMPv6-4-RATE_LIMIT_WARNING: icmpv6 rate limit exceeded in %s
Explanation num of ipc msgs sent to icmpv6 are rate limited. Parameters are: Function name
Recommended Action No special action is required.
Error Message ICMPv6-6-RESERVE_LIMIT_WARNING: Exceeded 80 percent of the reserve-limit for interface %s
Explanation Exceeded 80 percent of the reserve-limit for interface. Parameters are: Interface
Recommended Action No special action is required.
Error Message ICMPv6-6-STATE_LIMIT_WARNING: Exceeded 80 percent of the state-limit for interface %s
Explanation Exceeded 80 percent of the state-limit for interface. Parameters are: Interface
Recommended Action No special action is required.
Error Message ICMPv6-6-UNKNOWN_OPC: Received unknown mts opcode %d
Explanation ICMPv6 process received unknown Interprocess message, dropped.
Recommended Action No special action is required.
Error Message ICMPv6-7-IPV6_PACKET_SEND_FAILED: %s failed in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
This section contains the IGMPSN messages.
Error Message IGMPSN-2-NO_ENQUEUE: Unable to enqueue send element for peer %s
Explanation IGMPSN process failed to send a message over the TCP socket to peer. Parameters are: Peer IP address
Recommended Action No special action is required.
Error Message IGMPSN-2-NO_LISTEN_SOCKET: Fatal error, can't get listen socket setup in %s
Explanation IGMPSN process failed to obtain TCP packet. Parameters are: Function name
Recommended Action Dump core, then restart component.
Error Message IGMPSN-2-OUT_OF_SYNC_TCP_LEN: TCP data stream may be out of sync, suspect TLV length of %d from peer %s
Explanation IGMPSN process received invalid packet length from peer. Parameters are: TLV length, Peer IP address
Recommended Action No special action is required.
Error Message IGMPSN-2-OUT_OF_SYNC_TCP_TYPE: TCP data stream may be out of sync, suspect TLV type of %d from peer %s
Explanation IGMPSN process received malformed TLV from peer. Parameters are: TLV type, Peer IP address
Recommended Action No special action is required.
Error Message IGMPSN-2-SEND_BYTES_MISMATCH: Bytes sent(%d) exceeded Bytes to send(%u) for %s in %s
Explanation Number of Bytes sent to IGMPSN Peer exceeded Bytes to send. Parameters are: bytes sent, bytes to send, Peer IP address, function name
Recommended Action No special action is required.
Error Message IGMPSN-2-SEND_QUEUE_CORRUPT: Send queue corrupted for peer %s
Explanation The TCP socket send queue is corrupted. Connection to peer will be reset. Parameters are: Peer IP address
Recommended Action No special action is required.
Error Message IGMPSN-3-ACCEPT: In %s, %s failed with errmsg: %s
Explanation IGMPSN process failed to accept connection. Parameters are: Function name, TSP API, Error message
Recommended Action No special action is required.
Error Message IGMPSN-3-ALREADY_RUNNING: IGMPSN already running, exiting - %s
Explanation Another IGMPSN process is already running, this process will shutdown. Parameters are: Error message
Recommended Action No special action is required.
Error Message IGMPSN-3-API_FAILED: %s failed in %s
Explanation IGMPSN process failed in invoking an API. Parameters are: API name, Function in which API failed
Recommended Action No special action is required.
Error Message IGMPSN-3-AS_NUMBER: IGMPSN/BGP local AS number is - %s
Explanation IGMPSN process local AS number. Parameters are: AS number
Recommended Action No special action is required.
Error Message IGMPSN-3-CV_INIT: Couldn't init cond var %s
Explanation IGMPSN process failed to initialize conditional-variable resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message IGMPSN-3-FM_ERROR: FM could not shut down IGMPSN process
Explanation IGMPSN could not process the disable-req from FM.
Recommended Action Dump core, then restart component.
Error Message IGMPSN-3-GETSOCKNAME: In %s, %s failed with errmsg: %s
Explanation TSP api tsp_getsockname returned error. Parameters are: Function name, TSP API, Error message
Recommended Action No special action is required.
Error Message IGMPSN-3-IGMPSN_INIT: IGMPSN init failed: %s
Explanation IGMPSN process initialization failed. Parameters are: Component Name
Recommended Action Dump core, then restart component.
Error Message IGMPSN-3-INVALID_TLV: Invalid TLV, type: %d, length: %d from peer %s
Explanation IGMPSN process received an invalid packet. Appropriate error packet returned. Parameters are: TLV type, TLV length, Peer IP address
Recommended Action No special action is required.
Error Message IGMPSN-3-LIB_MTS_FAILED: %s failed in %s, errno: %s
Explanation Process failed to access the IGMPSN mts-queue. Parameters are: MTS function name, Function in which MTS function failed, Error message
Recommended Action No special action is required.
Error Message IGMPSN-3-MALLOC_FAILED: %s failed in %s
Explanation IGMPSN process is out of free memory. Parameters are: Malloc function, Function in which Malloc failed
Recommended Action Configure the network or router to decrease the number of routes.
Error Message IGMPSN-3-MQ_FAILED: %s failed in %s, errno: %s
Explanation IGMPSN process failed to access the message-queue. Parameters are: MQ function name, Function in which MQ function failed, Error message
Recommended Action No special action is required.
Error Message IGMPSN-3-MRIB_ROUTE: In %s, %s failed to add mrib route
Explanation IGMPSN process failed to add mrib routes. Parameters are: Function name, mrib_add_route
Recommended Action No special action is required.
Error Message IGMPSN-3-MTS_BIND: In %s, %s failed due to %s
Explanation IGMPSN called a MTS API which returned an error. Parameters are: Function name,MTS API,Error message
Recommended Action Dump core, then restart component.
Error Message IGMPSN-3-MTS_DROP: Error returned from mts_drop(), errmsg: %s
Explanation IGMPSN called a MTS API which returned an error. Parameters are: Error message
Recommended Action Dump core, then restart component.
Error Message IGMPSN-3-MTS_FAILED: %s failed in %s, errno: %s
Explanation IGMPSN process failed to access the mts-queue. Parameters are: MTS function name, Function in which MTS function failed, Error message
Recommended Action No special action is required.
Error Message IGMPSN-3-MTS_RECV: Error returned from mts_recv(), errmsg: %s
Explanation IGMPSN called a MTS API which returned an error. Parameters are: Error message
Recommended Action Dump core, then restart component.
Error Message IGMPSN-3-MUTEX_INIT: Couldn't init mutex %s
Explanation IGMPSN process failed to initialize mutex system resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message IGMPSN-3-NO_SET_PRIORITY: Failed to set policy or priority in %s
Explanation IGMPSN process could not set itself process priority, exiting. Parameters are: Function name
Recommended Action No special action is required.
Error Message IGMPSN-3-NO_SHUTDOWN: Unable to shutdown igmpsn_main_thread - %s
Explanation IGMPSN process unable to shut itself down. Parameters are: Message
Recommended Action Dump core, then restart component.
Error Message IGMPSN-3-NOSOURCE: Resetting peer due to VRF change for connect-source %s
Explanation The configured interface used for the connect-sourcehas moved to another VRF.
Recommended Action No special action is required.
Error Message IGMPSN-3-PTHREAD_FAILED: %s failed in %s for thread %s
Explanation IGMPSN process failed to create a task thread. Parameters are: PTHREAD function name, Function in which PTHREAD function failed, Error message
Recommended Action Dump core, then restart component.
Error Message IGMPSN-3-RESTART_REASON: IGMPSN process has restarted, restart reason: %s\n
Explanation IGMPSN is restoring the routes it had added in previous instance. Parameters are: Restart reason
Recommended Action No special action is required.
Error Message IGMPSN-3-SDB_CLIENT_ERROR: Failed to initialize shared database client with status %x and errmsg: %s\n
Explanation IGMPSN process could not initialize shared database, client. Parameters are: Status,Error Message
Recommended Action No special action is required.
Error Message IGMPSN-3-SELECT: In %s, %s failed with errmsg: %s
Explanation IGMPSN process failed to select. Parameters are: Function name, TSP API, Error message
Recommended Action No special action is required.
Error Message IGMPSN-3-SET_SOCKET_OPTIONS: In %s, %s failed for %s
Explanation IGMPSN process failed while setting socket options. Parameters are: Function name, API, Socket option
Recommended Action No special action is required.
Error Message IGMPSN-3-SETRLIMIT_FAILED: Data segment allocation of %d failed
Explanation IGMPSN process could not set itself memory resource limit, exiting. Parameters are: Size
Recommended Action No special action is required.
Error Message IGMPSN-3-SETSOCKOPT: In %s, %s failed while setting %s option with errmsg: %s
Explanation IGMPSN process failed while setting tsp socket options. Parameters are: Function name, TSP API, Socket option, Error message
Recommended Action No special action is required.
Error Message IGMPSN-3-SETUPSOCKET_ERROR: In %s, %s failed to create connection with %s
Explanation IGMPSN process failed to select. Parameters are: Function name, TSP API, IP address
Recommended Action No special action is required.
Error Message IGMPSN-3-SM_FAILED: %s failed in %s, errno: %s
Explanation IGMPSN process failed to access the System shared memory resource. Parameters are: SM function name, Function in which SM function failed, Error message
Recommended Action No special action is required.
Error Message IGMPSN-3-SOCKET_BIND: In %s, %s failed with errmsg %s for %s
Explanation IGMPSN process failed to bind. Parameters are: Function name, TSP API, Error message, IP address
Recommended Action No special action is required.
Error Message IGMPSN-3-SOCKET_CONNECT: In %s, %s failed to connect %s with context name:%s and errmsg: %s
Explanation IGMPSN process failed to connect to peer. Parameters are: Function name, TSP API, Peer IP address, Context name, Error message
Recommended Action No special action is required.
Error Message IGMPSN-3-SOCKET_ERROR: In %s, %s failed with errmsg: %s
Explanation IGMPSN process failed to create socket. Parameters are: Function name, TSP API, Error message
Recommended Action No special action is required.
Error Message IGMPSN-3-SYSMGR_DISPATCH: Error returned from sysmgr_dispatch(), errmsg: %s
Explanation IGMPSN called a System Manager API which returned an error. Parameters are: Error message
Recommended Action Dump core, then restart component.
Error Message IGMPSN-3-SYSMGR_INIT: Error in %s while %s
Explanation IGMPSN called a active timer API which returned an error. Parameters are: Function name,Cause
Recommended Action Dump core, then restart component.
Error Message IGMPSN-3-TXLIST_CREATE: Couldn't create txlist for %s in VRF:%s
Explanation IGMPSN failed to create txlist resource. Parameters are: Data type, The VRF that failure occured in
Recommended Action Dump core, then restart component.
Error Message IGMPSN-3-UNKNOWN_MTYPE: Unknown mtype: %d/%d in %s
Explanation IGMPSN process received unknown Interprocess message, dropped. Parameters are: Major type, Minor type, Function name
Recommended Action No special action is required.
Error Message IGMPSN-5-PEER_UPDOWN: Session to peer %s going %s
Explanation IGMPSN peer is going UP/DOWN. Parameters are: Peer IP Address, up/down
Recommended Action No special action is required.
Error Message IGMPSN-6-RESTART_SHUTDOWN: IGMPSN shutting self down via restart command
Explanation IGMPSN process is shutting itself down due to the restartcommand.
Recommended Action No special action is required.
Error Message IGMPSN-6-SHUTDOWN: Shutting down IGMPSN - %s
Explanation IGMPSN process is shutting itself down. Parameters are: Reason for shutdown
Recommended Action No special action is required.
Error Message IGMPSN-6-UNKNOWN_OPC: Received unknown mts opcode %d in %s
Explanation IGMPSN process received unknown Interprocess message, dropped. Parameters are: MTS opcode, Function name
Recommended Action No special action is required.
Error Message IGMPSN-7-OBJSTORE: Objstore API %s() failed with error: %d\n
Explanation Objstore API has failed.
Recommended Action Keep running, do nothing special.
This section contains the IM messages.
Error Message IM-2-AM_GETPIB: Unable to get pib from AM (pibname %s)
Explanation Could not initialize with Adjacency Manager.
Recommended Action Restart component.
Error Message IM-2-APIINIT: Unable to initialize %s API
Explanation Could not initialize server APIs.
Recommended Action Restart component.
Error Message IM-2-APILAUNCH: Unable to start %s
Explanation Could not start the specified protocol component.
Recommended Action Restart component.
Error Message IM-2-APIREGISTER: Unable to register with %s API
Explanation Could not register with specified server component.
Recommended Action Restart component.
Error Message IM-2-ATTACH: Unable to attach to %s
Explanation Could not attach to server shared memory.
Recommended Action Restart component.
Error Message IM-2-BADTUN: Bad tunnel type
Explanation Could not set the tunnel to specified type.
Recommended Action Restart component.
Error Message IM-2-BFCLEAR: Cannot clear bit %d in %s
Explanation Could not clear a bit in the specified bitfield.
Recommended Action Restart component.
Error Message IM-2-BFCLEARALL: Cannot clear all bits in %s
Explanation Could not clear all in the specified bitfield.
Recommended Action Restart component.
Error Message IM-2-BFCREATE: Cannot create %s
Explanation Could not create specified bitfield.
Recommended Action Restart component.
Error Message IM-2-BFFULL: Bit field %s is full
Explanation Specified bitfield does not have any available space.
Recommended Action Restart component.
Error Message IM-2-BFINIT: %s
Explanation Specified bitfiled could not be initialized.
Recommended Action Restart component.
Error Message IM-2-BFSET: Cannot set bit %d in %s
Explanation Could not set a bit in the specified bitfield.
Recommended Action Restart component.
Error Message IM-2-BFSETALL: Cannot set all bits in %s
Explanation Could not set all bits in the specified bitfield.
Recommended Action Restart component.
Error Message IM-2-CLICOMMANDSINIT: CLI commands could not be requested
Explanation Request to CLI server for IM CLI commands failed.
Recommended Action Restart component.
Error Message IM-2-CLT_GET_DRVINDICES: Could not get driver indices
Explanation Could not calculate the totoal number of interface driver components.
Recommended Action Restart component.
Error Message IM-2-CLTREGISTER: Client %s registration failed, %s
Explanation IM client could not be registered due to specified reason.
Recommended Action Restart component.
Error Message IM-2-CLTUNREGISTER: Client %s deregister failed, %s
Explanation IM client could not be deregistered due to specified reason.
Recommended Action Restart component.
Error Message IM-2-DSTADDPT: Could not add tunnel node to dest PT, reason %d
Explanation Could not add the tunnel destination information to the internal data structure.
Recommended Action Restart component.
Error Message IM-2-GETCONTEXT: Unable to get context from URIB (contextname: %s)
Explanation Could not initialize with URIB server.
Recommended Action Restart component.
Error Message IM-2-INTTIMER: Interface %s, %s failed
Explanation Interface related timer could not be started.
Recommended Action Restart component.
Error Message IM-2-MQOPEN: unable to open mq %s: %s
Explanation Unable to open the specified message queue.
Recommended Action Restart component.
Error Message IM-2-NHADDPT: Could not add tunnel next-hop information to PT, reason %d
Explanation Could not add the next-hop information for the tunnel to the internal data structure.
Recommended Action Restart component.
Error Message IM-2-NOMEM: Malloc (%ld) failed for: %s
Explanation Memory allocation failed for the specified structure. We are running out of memory.
Recommended Action Out of memory. Add more memory to the router.
Error Message IM-2-PTHREAD: procket_pthread_create failed for %s: error %d
Explanation Could not create new thread.
Recommended Action Restart component.
Error Message IM-2-SHMCREATE: Cannot create shared memory, reason %d
Explanation IM is unable to create shared memory resources.
Recommended Action Restart component.
Error Message IM-2-SUPER_MEMBER_MISMATCH: super member: count %d, actual %d
Explanation Super interface member list is corrupted.
Recommended Action Restart component.
Error Message IM-2-SYSMGRNOTIFY: sysmgr notification for %s failed
Explanation Request for sysmgr notification for the specified component failed.
Recommended Action Restart component.
Error Message IM-2-TIMER: %s failed
Explanation Operation on the specified timer failed.
Recommended Action Restart component.
Error Message IM-2-TXLIST_BAD_OBJTYPE: Bad txlist object type %d
Explanation Unknown object type encountered in the transmit list. It could be indication of corrupted transmit list.
Recommended Action Restart component.
Error Message IM-2-TXLIST_CREATE: %s
Explanation Could not create transmit list.
Recommended Action Restart component.
Error Message IM-2-TXLIST_DELETE_MEMBER: txlist delete member failed for element %d
Explanation Could not remove client from the transmit list.
Recommended Action Restart component.
Error Message IM-2-TXLIST_INSERT_ELEMENT: txlist insert element failed for iod %d
Explanation Could not insert intreface in the transmit list.
Recommended Action Restart component.
Error Message IM-2-TXLIST_INSERT_MEMBER: txlist insert member failed for client %s
Explanation Could not insert client in the transmit list.
Recommended Action Restart component.
Error Message IM-2-TXTHREAD_INIT: %s
Explanation Could not initialize transmit list thread.
Recommended Action Restart component.
Error Message IM-2-URIB_GETPIB: Unable to get pib from URIB (pib 0x%p, pibname %s, context 0x%p, contexname %s
Explanation Could not initialize with URIB server.
Recommended Action Restart component.
Error Message IM-2-URIBRNH: URIB %s RNH failed for address %s
Explanation Could not setup request for RNH notification with URIB.
Recommended Action Restart component.
Error Message IM-2-WORKQ_ADD: Failed to add %s to work queue
Explanation Could not add the work item to the queue for worker thread.
Recommended Action Restart component.
Error Message IM-2-WORKQ_INIT: Failed to initialize work queue
Explanation Failed to initialize work queue.
Recommended Action Restart component.
Error Message IM-2-WORKQ_SYSMGR: %s is no longer alive, returning from %s
Explanation Server component is going down. Cannot do any more work for that server.
Recommended Action Restart component.
Error Message IM-2-WORKQ_WAIT: Error while waiting for work event, %d
Explanation Error while waiting for events in the worker thread.
Recommended Action Restart component.
Error Message IM-3-CLT_DIFF_EPID: epids differ, old %u, new %u
Explanation An older instance of the client is already registered with IM. The new instance will overwrite the old one.
Recommended Action Keep running, do nothing special.
Error Message IM-3-CLTCLEAREXT: Client %s clear extension failed, %s
Explanation IM could not clear client extension for the specified interface.
Recommended Action Keep running, do nothing special.
Error Message IM-3-CLTEXISTS: Client %s is already registered with IM via queue %s
Explanation An older instance of the client is already registered with IM. The new instance will overwrite the old one.
Recommended Action Keep running, do nothing special.
Error Message IM-3-CLTSETEXT: Client %s set extension failed, %s
Explanation IM could not set client extension for the specified interface.
Recommended Action Keep running, do nothing special.
Error Message IM-3-DFBADCLASS: Bad debug filter class 0x%x
Explanation Invalid class of debug filters.
Recommended Action Keep running, do nothing special.
Error Message IM-3-ETH_BAD_STATS: snmp ether stats bad stats
Explanation Could not get interface statistics.
Recommended Action Keep running, do nothing special.
Error Message IM-3-ETH_STATS_REQ: snmp ether stats bad send
Explanation Request to ethernet driver to update statistics failed. This would lead to incorrect interface statistics value.
Recommended Action Keep running, do nothing special.
Error Message IM-3-HEAP_SIZE_ERROR: Increase of heap size from %d to %d failed: %s
Explanation IM could not increase the size of the heap.
Recommended Action Keep running, do nothing special.
Error Message IM-3-IF_CHANGE_MASK_UNKNOWN: Unknown if change mask for interface %s %s
Explanation Undefined change mask has been specified for the given interface.
Recommended Action Keep running, do nothing special.
Error Message IM-3-IMTLV_BAD_MSGTYPE: IM bad tlv message type %d
Explanation Unknown message TLV encountered.
Recommended Action Keep running, do nothing special.
Error Message IM-3-INTADD: Interface %s addition failed, %s
Explanation Interface could be created due to specified reason.
Recommended Action Keep running, do nothing special.
Error Message IM-3-INTADDEXIST: Interface %s addition failed, %d already exists
Explanation Interface currently being added already exists.
Recommended Action Keep running, do nothing special.
Error Message IM-3-INTADDFULL: Interface %s addition failed, Max. number of interfaces exceeded
Explanation Interface could not be configured as Interface Manager has reached its maximum capacity.
Recommended Action Keep running, do nothing special.
Error Message IM-3-INTADDIFMSG: Could not process add interface %lx, %lx, %s
Explanation Received a corrupted message from interface driver.
Recommended Action Keep running, do nothing special.
Error Message IM-3-INTADDPT: Interface %s addition failed, phyloc tree addition, reason %d
Explanation New interface could not added to internal data structure.
Recommended Action Keep running, do nothing special.
Error Message IM-3-INTBAD: Invalid interface %d for %s
Explanation Specified action cannot be take on the interface.
Recommended Action Keep running, do nothing special.
Error Message IM-3-INTDAMPINIT: Interface %s, could not initialize dampening
Explanation Interface dampening could not be initialized.
Recommended Action Keep running, do nothing special.
Error Message IM-3-INTDEL: Interface %s deletion failed, %s
Explanation Interface could not be deleted due to specified reason.
Recommended Action Keep running, do nothing special.
Error Message IM-3-INTDELIFMSGMASK: Could not process delete interface %lx bad mask %lx
Explanation Received a corrupted message from interface driver.
Recommended Action Keep running, do nothing special.
Error Message IM-3-INTLSMSG: Could not process link state message %lx, %lx, %s
Explanation Received a corrupted message from interface driver.
Recommended Action Keep running, do nothing special.
Error Message IM-3-MQSEND: mq_send() error %s while sending %s queue: %s
Explanation Specified message could not be sent to the IM client.
Recommended Action Keep running, do nothing special.
Error Message IM-3-MQUNEXPECT: Recieved unexpected message (%d/%d) on %s queue
Explanation Received an unexpected message on the specified message queue.
Recommended Action Keep running, do nothing special.
Error Message IM-3-MSGPROC: Could not process %s message from pid %d
Explanation Specified client request could not be completed.
Recommended Action Keep running, do nothing special.
Error Message IM-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation IM called a MTS API which returned an error.
Recommended Action No special action is required.
Error Message IM-3-MTS_RECV: Error returned from mts_recv(), errno: %s
Explanation IM called a MTS API which returned an error.
Recommended Action No special action is required.
Error Message IM-3-NO_INTF_BLOCK: Interface block not found while processing %s, iod %d
Explanation Interface related internal data structure could be found.
Recommended Action Keep running, do nothing special.
Error Message IM-3-SNMPAPIDATA: Message data is NULL
Explanation SNMP message does not have memory to store data.
Recommended Action Keep running, do nothing special.
Error Message IM-3-SNMPAPIINIT: Function snmpd_api_init() was not invoked
Explanation SNAMP API is being invoked before it initilization.
Recommended Action Keep running, do nothing special.
Error Message IM-3-SNOMEM: Smalloc (%ld) failed for: %s
Explanation Shared memory allocation failed. We are running out of shared memory resources.
Recommended Action Out of memory. Add more memory to the router.
Error Message IM-3-SONETINTTIMERFAIL: Sonet interval timer %s failed on %s
Explanation Specified timer could be initialized.
Recommended Action Keep running, do nothing special.
Error Message IM-3-STATS_NODE_BAD: Invalid stats node for %s
Explanation Encountered invalid request to get/clear statistics.
Recommended Action Keep running, do nothing special.
Error Message IM-3-STATS_NODE_NOT_FOUND: Cound not find stats node for %s
Explanation Could not find the internal data structure.
Recommended Action Keep running, do nothing special.
Error Message IM-3-STATSQ_INIT: Failed to initialize stats queue
Explanation An internal software error occured.
Recommended Action Restart component.
Error Message IM-3-VLANADDPT: Could not add Vlan information in tree, reason %d
Explanation VLAN interface information could not be added to internal data structure due to specified reason.
Recommended Action Keep running, do nothing special.
Error Message IM-6-LINEPROTO: Line protocol on interface %s changed to state %s
Explanation Line protocol on the specified interface has changed.
Recommended Action No special action is required.
Error Message IM-6-MTS_UNKNOWN_MSG: Received unknown MTS message with opcde %d, dropping it
Explanation IM recieved an unknown MTS message. The message is dropped.
Recommended Action No special action is required.
This section contains the IP messages.
Error Message IP-2-CRIT_FAILURE: Failed to %s
Explanation A Critical operation has failed in the IP process.
Recommended Action Dump core, then restart component.
Error Message IP-2-IP_NS_NETLINK_CREATE_FAILED: NS (%s) Netlink socket create failed (%d)
Explanation NS Netlink socket create failed.
Recommended Action Report the issue to Customer Support.
Error Message IP-2-IP_STARTUP_FAILURE: Failed to %s during startup. error %d
Explanation A Critical operation has failed during startup of the IP process.
Recommended Action No special action is required.
Error Message IP-2-NAT_MAX_LIMIT: NAT: Can't create dynamic translations, %s
Explanation The configured max limit is reached.
Recommended Action No special action is required.
Error Message IP-3-CV_INIT: Couldn't init cond var %s
Explanation IP process failed to initialize conditional-variable resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message IP-3-INVALID_IF_INDEX: Invalid interface index received from %d
Explanation Invalid interface index received. Parameters are: Thread Name
Recommended Action Report the issue to Customer Support.
Error Message IP-3-IP_CLIENT_GET: HA client filter recovery failed (%d)
Explanation HA client filter recovery failed.
Recommended Action Report the issue to Customer Support.
Error Message IP-3-IP_CLNT_FAILURE: Invalid IP registration reply. Message major type %d, minor type %d
Explanation An IP client has failed in the registration process withIP.
Recommended Action Report the issue to Customer Support.
Error Message IP-3-IP_FAILURE: Failed to %s
Explanation A Critical operation has failed in the IP process.
Recommended Action Report the issue to Customer Support.
Error Message IP-3-IP_HA_UPDATE: HA update failed (%d)
Explanation HA update failed.
Recommended Action Report the issue to Customer Support.
Error Message IP-3-IP_INTERNAL_ERROR: %s
Explanation An internal error has occured in the IP process.
Recommended Action Report the issue to Customer Support.
Error Message IP-3-IP_INTF_DAMPENED: Interface %s is suppressed
Explanation Interface got deactivated for L3 service due to frequent flappings.
Recommended Action please check the interface link. This link is frequently changing.
Error Message IP-3-IP_INTF_UNDAMPENED: Interface %s is unsuppressed
Explanation Interface got activated for L3 service.
Recommended Action No special action is required.
Error Message IP-3-IP_MSG_TO_TLV: TLV Conversion failed (%d)
Explanation TLV conversion failed.
Recommended Action Report the issue to Customer Support.
Error Message IP-3-IP_MTSDROP: Error returned from mts_drop(), errno: %s
Explanation IP called a MTS API which returned an error.
Recommended Action No special action is required.
Error Message IP-3-IP_MTSRECV: Error returned from mts_recv(), errno: %s
Explanation IP called a MTS API which returned an error.
Recommended Action No special action is required.
Error Message IP-3-IP_MTSSEND: Error returned from mts_send(), errno: %s
Explanation IP called a MTS API which returned an error.
Recommended Action No special action is required.
Error Message IP-3-IP_NO_MBUF: Failed to allocate mbuf %s
Explanation The IP process has run out of network buffers.
Recommended Action Report the issue to Customer Support.
Error Message IP-3-IP_NO_MEM: Failed to allocate private memory for %s
Explanation The IP process has run out of private memory.
Recommended Action Report the issue to Customer Support.
Error Message IP-3-IP_THR_CREATE: Failed to create %s thread. error %d
Explanation A failure occured while creating a thread.
Recommended Action Report the issue to Customer Support.
Error Message IP-3-IP_TLV_TO_STRUCT: TLV to Struct Conversion failed (%d)
Explanation TLV to Struct conversion failed.
Recommended Action Report the issue to Customer Support.
Error Message IP-3-IP_UNK_MSG: Unrecognized message major type %d, minor type %d
Explanation An unknown message was received from another process.
Recommended Action Report the issue to Customer Support.
Error Message IP-3-MRIB_ADD_ROUTE: MRIB add route failed in %s for VRF %s
Explanation IP failed to add route in MRIB. Parameters are: Function Name, Context Name
Recommended Action No special action is required.
Error Message IP-3-MRIB_DELETE_ROUTE: MRIB delete route failed in %s for VRF %s
Explanation IP failed to delete route from MRIB. Parameters are: Function Name, Context Name
Recommended Action No special action is required.
Error Message IP-3-MV_INIT: Couldn't init mutex %s
Explanation IP process failed to initialize mutex system resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message IP-3-NO_SH_MEM: Failed to allocate shared memory %s
Explanation The IP process has run out of shared memory.
Recommended Action Report the issue to Customer Support.
Error Message IP-3-PSS_API_INIT: Ksink pss API init failed (%d)
Explanation Ksink pss API init failed.
Recommended Action Report the issue to Customer Support.
Error Message IP-3-TXLIST_CREATE: Couldn't create txlist for %s
Explanation IP failed to create txlist resource. Parameters are: Data type
Recommended Action Dump core, then restart component.
Error Message IP-3-URIB_ERR: Failed to %s urib
Explanation A failure occured in a transaction with URIB.
Recommended Action Report the issue to Customer Support.
Error Message IP-6-BAD_ICMP_PKT: Received ICMP packet with bad length (%d). Min len %d, Adv len %d, IP hdr length %d, Expected IP hdr len %d
Explanation An ICMP packet was received with a bad length.
Recommended Action No special action is required.
Error Message IP-6-IM_RECOVER_ERROR: Failed to recover correct information for interface %s %d
Explanation IP could not recover the info for interface.
Recommended Action No special action is required.
Error Message IP-6-IP_MTS_UNKNOWN_MSG: Received unknown MTS message with opcde %d, dropping it
Explanation IP recieved an unknown message. The message is dropped.
Recommended Action No special action is required.
Error Message IP-6-IP_UNK_MSG_MAJOR: Unrecognized message from %s. Major type %d
Explanation An unknown message (major) was received from another process.
Recommended Action Report the issue to Customer Support.
Error Message IP-6-IP_UNK_MSG_MINOR: Unrecognized message from %s. Minor type %d
Explanation An unknown message (minor) was received from another process.
Recommended Action Report the issue to Customer Support.
Error Message IP-6-MQ_FLUSH: Flushing %d messages from the MRIB message queue
Explanation The MRIB message queue was flushed after a restart of the IP process.
Recommended Action No special action is required.
Error Message IP-6-REG_SEND_MSG: Suppress PIM Data Register for (%s, %s) due to suppression-timer\n
Explanation Suppress PIM Data Register due to suppression-timer. Parameters are: Source address, Group address
Recommended Action No special action is required.
Error Message IP-6-STATS_ERROR: Failed to get hardware statistics for interface %s, reason %s
Explanation IP could not get the requested statistics from the hardware.
Recommended Action No special action is required.
Error Message IP-6-SYSMAN_CLEANUP: Terminated by SYSMAN cleanup signal %d
Explanation System Manager sent a cleanup signal to IP to exit the process.
Recommended Action No special action is required.
Error Message IP-7-INVALID_NOTIFY: %s
Explanation UNEXPECTED_ERROR_EXPLANATION. Parameters are: log string
Recommended Action No special action is required.
This section contains the IPv6 messages.
Error Message IPv6-2-IPV6_MSG_DAD_FAILED: IPv6 DAD failed for %s
Explanation Duplicate address detected over network.
Recommended Action No special action is required.
Error Message IPv6-2-IPV6_MSG_MVSH: %s
Explanation shutting down interface using mvsh.
Recommended Action No special action is required.
Error Message IPv6-2-RECURSIVE_LOOP: Recursive loop in %s
Explanation There is a recursive function calling loop.
Recommended Action Report the issue to Customer Support.
Error Message IPv6-2-SDB_CREAT: Failed to create shared database
Explanation Component API call failed in IPv6.
Recommended Action No special action is required.
Error Message IPv6-2-SDB_DESTROY: Failed to destroy shared database
Explanation Component API call failed in IPv6.
Recommended Action No special action is required.
Error Message IPv6-2-SDB_OPEN: Failed to open shared database
Explanation Component API call failed in IPv6.
Recommended Action No special action is required.
Error Message IPv6-3-BAD_CONTEXT: Bad context-id %d in %s
Explanation The context cannot be found.
Recommended Action No special action is required.
Error Message IPv6-3-FRAME_LENGTH_LONG: Frame length: %d greater than maximum IPv6 payload size for packet received on interface %s
Explanation The packet has too big frame length, dropped.
Recommended Action No special action is required.
Error Message IPv6-3-GET_PIB_FAILED: %s failed in %s
Explanation IPv6 could not find client's PIB handle.
Recommended Action No special action is required.
Error Message IPv6-3-INVALID_VERSION: Invalid IPv6 version: %d for packet received on interface %s
Explanation The packet has invalid protocol version field, dropped.
Recommended Action No special action is required.
Error Message IPv6-3-IPV6_API_FAILED_IOD: %s failed in %s, iod = %d
Explanation Component API call failed in IPv6.
Recommended Action No special action is required.
Error Message IPv6-3-IPV6_API_FAILED: %s failed in %s
Explanation Component API call failed in IPv6.
Recommended Action No special action is required.
Error Message IPv6-3-IPV6_CV_INIT: Couldn't init cond var %s
Explanation IPv6 process failed to initialize conditional-variable resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message IPv6-3-IPV6_MSG_TO_TLV: TLV Conversion failed (%d)
Explanation TLV conversion failed.
Recommended Action Report the issue to Customer Support.
Error Message IPv6-3-IPV6_MTS_RECV: Error returned from mts_recv(), errno: %s
Explanation IPv6 called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message IPv6-3-IPV6_MTS_UNKNOWN_MSG: Received unknown MTS message with opcde %d, dropping it
Explanation IPv6 recieved an unknown message. The message is dropped.
Recommended Action No special action is required.
Error Message IPv6-3-IPV6_MV_INIT: Couldn't init mutex %s
Explanation IPv6 process failed to initialize mutex system resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message IPv6-3-IPV6_TLV_TO_STRUCT: TLV to Struct Conversion failed (%d)
Explanation TLV to Struct conversion failed.
Recommended Action Report the issue to Customer Support.
Error Message IPv6-3-IPV6_TXLIST_CREATE: Couldn't create txlist for %s
Explanation IPv6 failed to create txlist resource. Parameters are: Data type
Recommended Action Dump core, then restart component.
Error Message IPv6-3-M6RIB_ADD_ROUTE: M6RIB add route failed in %s for VRF %s
Explanation IP failed to add route in M6RIB. Parameters are: Function Name, Context Name
Recommended Action No special action is required.
Error Message IPv6-3-MALLOC_FAILED_PREFIX: %s failed in %s for %s
Explanation IPV6 process is out of free memory.
Recommended Action No special action is required.
Error Message IPv6-3-MALLOC_FAILED: %s failed in %s
Explanation IPv6 process is out of free memory.
Recommended Action No special action is required.
Error Message IPv6-3-MBUF_FAILED: %s failed in %s (%d bytes)
Explanation IPV6 process is out of mbufs.
Recommended Action No special action is required.
Error Message IPv6-3-MQ_FAILED_NAME: %s failed in %s for client %s, errno: %s
Explanation IPv6 failed to access message-queue resource for the client.
Recommended Action No special action is required.
Error Message IPv6-3-MQ_FAILED_PID: %s failed in %s to client pid: %d, errno: %s
Explanation IPv6 failed to access message-queue resource for the client.
Recommended Action No special action is required.
Error Message IPv6-3-MQ_FAILED: %s failed in %s, errno: %s
Explanation IPv6 failed to access message-queue resource.
Recommended Action No special action is required.
Error Message IPv6-3-MTS_FAILED_NAME: %s failed in %s for client %s, errno: %s
Explanation IPv6 failed to access mts-queue resource for the client.
Recommended Action No special action is required.
Error Message IPv6-3-MTS_FAILED_PID: %s failed in %s to client pid: %d, errno: %s
Explanation IPv6 failed to access mts-queue resource for the client.
Recommended Action No special action is required.
Error Message IPv6-3-MTS_FAILED: %s failed in %s, errno: %s
Explanation IPv6 failed to access mts-queue resource.
Recommended Action No special action is required.
Error Message IPv6-3-PID_CONFLICT: Client is using pid: %d/%d with different extended pid: %d
Explanation Multiple clients have same process ids.
Recommended Action No special action is required.
Error Message IPv6-3-PTHREAD_FAILED: %s failed for %s in %s
Explanation IPv6 process failed to create a task thread.
Recommended Action Dump core, then reload the stack.
Error Message IPv6-3-REG_FAILED: Failed to register with IPv6
Explanation Component API call failed in IPv6.
Recommended Action No special action is required.
Error Message IPv6-3-SYSMGR_DISPATCH: Error returned from sysmgr_dispatch(), errno: %s
Explanation IPv6 called a System Manager API which returned an error.
Recommended Action Dump core, then restart component.
Error Message IPv6-3-U6RIB_BAD_IPC: U6RIB corrupted IPC message suspected
Explanation IPv6 process received invalid IPC message from U6RIB.
Recommended Action No special action is required.
Error Message IPv6-3-UNKNOWN_MTYPE: Unknown mtype: %d/%d opcode %d in %s
Explanation IPv6 process received unknown Interprocess message, dropped.
Recommended Action No special action is required.
Error Message IPv6-4-IPV6_MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation IPv6 called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message IPv6-4-M6RIB_SM_ADDR: M6RIB shared memory not valid for mtype:%d, xid:%d, count:%d
Explanation M6RIB shared memory being accesses is not valid.
Recommended Action No special action is required.
Error Message IPv6-6-FRAME_LENGTH_SHORT: Frame length: %d less than IPv6 payload length: %d for packet received on interface %s from source address %s
Explanation The packet has invalid frame length, dropped.
Recommended Action No special action is required.
Error Message IPv6-6-IPV6_STATS_ERROR: Failed to get hardware statistics for interface %s, reason %s
Explanation IPv6 could not get the requested statistics from the hardware.
Recommended Action No special action is required.
Error Message IPv6-6-v6_REG_SEND_MSG: Suppress PIM6 Data Register for (%s, %s) due to suppression-timer\n
Explanation Suppress PIM6 Data Register due to suppression-timer. Parameters are: Source address, Group address
Recommended Action No special action is required.
This section contains the ISIS messages.
Error Message ISIS-2-AVL_FAIL: Add to CSNP cache failed: %s - %s
Explanation An unexpected but handleable event has occurred. Parameters are: Start LSP-ID, End LSP-ID
Recommended Action Restart component.
Error Message ISIS-2-HOLDDOWN: Failed to enable process after sequence number wrap holddown.
Explanation An unexpected but handleable event has occurred.
Recommended Action Restart component.
Error Message ISIS-2-IIB_EXT: %s extension msg for %s (%d) - %s
Explanation An unexpected but handleable event has occurred.
Recommended Action Restart component.
Error Message ISIS-2-IM_DEL: Delete msg for %s (%d) iib %p - iib iod %d mismatched
Explanation An unexpected but handleable event has occurred. Parameters are: Interface Name, Interface Ordinal, Interface Memory, Interface Memory Ordinal Value
Recommended Action Restart component.
Error Message ISIS-2-ISIS_RST_HMM_OFF: HMM is disabled, FP ISIS will restart in FabricPath mode
Explanation IS-IS for FabricPath restarts due to a major mode change.
Recommended Action No special action is required.
Error Message ISIS-2-ISIS_RST_HMM_ON: HMM is enabled, FP ISIS will restart in DFA mode
Explanation IS-IS for Fabric Path restarts due to a major mode change.
Recommended Action No special action is required.
Error Message ISIS-2-LSP_FREE_LINK: L%d %s is already on free list
Explanation An unexpected but handleable event has occurred. Parameters are: Level, LSP-ID
Recommended Action Restart component.
Error Message ISIS-2-MCAST_ADD: Failed to add L%d multicast address
Explanation Was unable to join to the appropriate multicast group on an interface. Parameters are: Level
Recommended Action Restart component.
Error Message ISIS-2-MEM_ERR: Insufficient memory for %s
Explanation Memory is not avialable for adding SNP entries. Parameters are: Reason
Recommended Action Restart component.
Error Message ISIS-2-MQRCVD: %s thread - message queue receive failure <%d>
Explanation An unexpected but handleable event has occurred. Parameters are: Thread Name, Error Number
Recommended Action Restart component.
Error Message ISIS-2-REDIST_PIB_SHM: Failed to attach to redistributing PIB's SHM %s
Explanation An unexpected but handleable event has occurred. Parameters are: PIB Name
Recommended Action Restart component.
Error Message ISIS-2-ROUTE_BUF_OVERFLOW: %s route buffer overflow at entry %u\n
Explanation An unexpected but handleable event has occurred. Parameters are: Address Family, Counter Location
Recommended Action Restart component.
Error Message ISIS-2-ROUTE_NOTIFY: Route notifications to the RIB are not possible. This will result in stale state in the FIB.
Explanation An unexpected but handleable event has occurred.
Recommended Action Restart component.
Error Message ISIS-2-RUNTIME_CLEANUP_FAILURE: Unexpected runtime cleanup failure. Failed to %s
Explanation An unexpected software error has occurred while cleaning up a sub-component. Parameters are: Reason
Recommended Action Restart component.
Error Message ISIS-2-RUNTIME_EXIT_FAIL: Dergister with %s failed with error %s
Explanation IS-IS was unable to deregister with a server. Parameters are: Server NameError Message
Recommended Action No special action is required.
Error Message ISIS-2-RUNTIME_INIT_FAILURE: Unexpected runtime initialization failure. Failed to %s
Explanation An unexpected software error has occurred while initializing a sub-component. Parameters are: Reason
Recommended Action Restart component.
Error Message ISIS-2-STARTUP_FAILURE: Startup failure: Failed to %s
Explanation An unrecoverable software error has occurred during startup. Parameters are: Reason
Recommended Action Reload the stack.
Error Message ISIS-2-SUM_DIST: sum-addr %s/%d has zero route-dist candidate count
Explanation An unexpected but handleable event has occurred. Parameters are: Summary Address Prefix, Summary Address Mask
Recommended Action Restart component.
Error Message ISIS-2-TLV_MIGRATE: L%d %s still has TLV during migration
Explanation An unexpected but handleable event has occurred. Parameters are: Level, LSP-ID
Recommended Action Restart component.
Error Message ISIS-2-URIB_ADD_RNH_FAILURE: Cannot add RNH to %s
Explanation An unexpected but handleable event has occurred. Parameters are: RIB Address Family
Recommended Action Restart component.
Error Message ISIS-2-URIB_UPDATE: Failed to notify SPF thread about route update buffer availability
Explanation An unexpected but handleable event has occurred.
Recommended Action Restart component.
Error Message ISIS-3-AVL_LOOKUP: Can't locate CSNP fragment for %s
Explanation SNP cache may get cleaned up during normal operation. Parameters are: LSP-ID
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-BFD_SESSION_REMOVE: Failed to remove BFD session, error %s
Explanation Unable to remove BFD sessions. Parameters are: System Error
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-ISIS_HA_PSS: HA Persistent-store failure for %s %s: %s
Explanation A software error has occurred during HA. Stateful HA recovery will be disabled.
Recommended Action No special action is required.
Error Message ISIS-3-LSP_REFRESH: Refresh non-self-originated level-%d LSP %s
Explanation An unexpected but handleable event has occurred. Parameters are: Level, LSP-ID
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-MBUF_COPY: Error 0x%08x copy %hu bytes packet from %s%s
Explanation An unexpected but handleable event has occurred.
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-MCAST_DEL: Failed to remove L%d multicast address
Explanation Was unable to leave from the appropriate multicast group on an interface. Parameters are: Level
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation ISIS called a MTS API which returned an error. Parameters are: Error Number
Recommended Action Dump core, then restart component.
Error Message ISIS-3-MTS_RECV: Error returned from mts_recv(), errno: %s
Explanation ISIS called a MTS API which returned an error. Parameters are: Error Number
Recommended Action Dump core, then restart component.
Error Message ISIS-3-MTS: Error returned from MTS operation %s, errno: %s
Explanation ISIS called a MTS API which returned an error. Parameters are: Operation Description, Error Number
Recommended Action Dump core, then restart component.
Error Message ISIS-3-NO_HELPER_IIB: No helper iib for %s
Explanation An unexpected but handleable event has occurred. Parameters are: LSP-ID
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-NOTIFY_THREAD: Failed to notify %s thread - Reschedule
Explanation An unexpected but handleable event has occurred. Parameters are: Thread Name
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-OTV_INFO: Failed to retrieve OTV %s info %s
Explanation Unable to retrieve OTV information.
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-OTV_SITE_CAP: Failed to add/remove otv site/net-id capability conf check, error %s
Explanation Unable to add conf check.
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-PIB_UP: Failed to bring up protocol
Explanation An unexpected but handleable event has occurred.
Recommended Action No special action is required.
Error Message ISIS-3-PT_ADD: Couldn't add entry to %s PT
Explanation ISIS failed to update a local database entry. Parameters are: Entry name, Database name
Recommended Action No special action is required.
Error Message ISIS-3-PT_DEL: Couldn't delete entry for %s from %s PT
Explanation ISIS failed to delete an entry from a local database. Parameters are: Entry name
Recommended Action No special action is required.
Error Message ISIS-3-RPM_CALLBACK: RPM Callback handle and/or user data missing
Explanation An attempt to obtain RPM Keychain information failed.
Recommended Action No special action is required.
Error Message ISIS-3-SELF_LSP_CLEANUP: Cleanup L%d LSP %s with non-null TLV list
Explanation An unexpected but handleable event has occurred. Parameters are: Level, LSP-ID
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-SLAB_ALLOC: Slab alloc of type %s failed for %s
Explanation ISIS process failed to allocate Slab memory. Parameters are: Structure Type, Function Name
Recommended Action Configure the network or router to decrease the number of routes.
Error Message ISIS-3-SPF_ADJ_DEL: Deleting SPF adj with refcount %u\n
Explanation An unexpected but handleable event has occurred. Parameters are: RefCount
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-SRAPP_REGISTER_CB: SR-APP register callback error %d (%s) %s
Explanation IS-IS failed to complete registration with SR-APP. Parameters are: Error code, Error string, Additional details
Recommended Action Restart component.
Error Message ISIS-3-SWID_UPDATE: Switch-ID table update failed for %s
Explanation ISIS process failed to update Switch-ID database. Parameters are: System ID
Recommended Action Configure the network or router to decrease the number of routes.
Error Message ISIS-3-ULIB_REGISTER_CB: Ulib register callback error %d (%s) %s
Explanation IS-IS failed to complete registration with Ulib. Parameters are: Error code, Error string, Additional details
Recommended Action Restart component.
Error Message ISIS-3-UNK_DEB_FLAG: Ignore unrecognized debug flag \%s\
Explanation An unexpected but handleable event has occurred. Parameters are: Debug Flag
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-UNK_IP_NOTIF: Unrecognized IP address change notification type %u
Explanation An unexpected but handleable event has occurred. Parameters are: IP Notification Type
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-UNK_LSP_TIMER: Unrecognized LSP timer type %d for level-%d LSP %s
Explanation An unexpected but handleable event has occurred. Parameters are: Timer Type, Level, LSP-ID
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-UNK_MSG_MAJOR: %s thread - Unrecognized message major type %d
Explanation An unexpected but handleable event has occurred. Parameters are: Thread Name, Message Major Type
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-UNK_MSG_MINOR: Unrecognized %s message minor type %d
Explanation An unexpected but handleable event has occurred. Parameters are: Component, Message Minor Type
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-UNK_MTS_OPC: %s thread - Unrecognized MTS opcode %d
Explanation An unexpected but handleable event has occurred. Parameters are: Thread Name, MTS Opcode
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-UNK_SYSMGR_NOTIFY: Unexpected registration received from process %u
Explanation An unexpected but handleable event has occurred. Parameters are: Base Process UUID
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-VLAN_MGR: Error in parsing %s message from VLAN Manager
Explanation An unexpected but handleable event has occurred. Parameters are: Message Type
Recommended Action Keep running, do nothing special.
Error Message ISIS-3-WEIRD_CACHE: Inconsistent cache %x %s %s
Explanation An unexpected but handleable event has occurred. Parameters are: Cache Memory Location, Start LSP-ID, End LSP-ID
Recommended Action Keep running, do nothing special.
Error Message ISIS-4-ADD_DEL_ULIB_ERR: Failed to %s %u route(s) xid %u to ULIB
Explanation IS-IS failed to update route information into ULIB. Parameters are: Add/Delete, Route Count, Transaction ID
Recommended Action Restart component.
Error Message ISIS-4-ADD_DEL_URIB_ERR: Failed to %s %u %s route(s) xid %u to URIB
Explanation IS-IS failed to update route information into URIB. Parameters are: Add/Delete, Route Count, Route Type, Transaction ID
Recommended Action Restart component.
Error Message ISIS-4-ADD_UNK_NH_ADDR: Attempt to add for L%d %s/%d on %s with unknown (zero) NH address
Explanation IS-IS has detected one or more routers at the same level to have a different set of address families enabled. Parameters are: Level, Address Prefix, Mask, Interface Name
Recommended Action Configure all IS-IS routers at the same level to have the same address families enabled.
Error Message ISIS-4-ADJ_ADVT: Failed to advertise level %d adjacency %s
Explanation IS-IS was unable to advertise the indicated adjacency. Parameters are: Level,Adjacency ID
Recommended Action No special action is required.
Error Message ISIS-4-DUP_IP_ADDRESS: IP address %s has been used by %s and %s
Explanation IS-IS has detected two systems using the same IP address. Parameters are: IP Address, System ID, System ID
Recommended Action ACTION_ISIS_CONFIG_DIFF_IP_ADDRESS.
Error Message ISIS-4-FTAG_CBL_UPD: Ftag CBL update failed with error code %d, please use appropriate show commands to check the CBL state on the ports
Explanation ISIS FTAG CBL update. Parameters are: Error code
Recommended Action No special action is required.
Error Message ISIS-4-ILLEGAL_PREFIX: Ignore internal L%d route %s/%d with external metric from %s
Explanation IS-IS has detected an internal route advertised with external metric, which is an illegal combination, by a router within the network. Parameters are: Level, Address Prefix, Mask, LSP Id
Recommended Action Either configure the indicated router to not originate the incorrect information, or update the router's software to a version which does not originate the information incorrectly.
Error Message ISIS-4-LAN_DUP_SYSID: L%d LAN IIH - Duplicate system ID %s detected over %s from %s
Explanation IS-IS has detected another system on the indicated LAN that is reusing the local system ID. Parameters are: Level,System ID, Interface Name, MAC ID
Recommended Action Configure either the local or remote router with a different system ID.
Error Message ISIS-4-LSP_DUP_SYSID: L%d LSP - Possible duplicate system ID %s detected
Explanation IS-IS has detected another non-directly connected system that is reusing the local system ID. Parameters are: Level,System ID
Recommended Action Configure either the local or remote router with a different system ID.
Error Message ISIS-4-LSPFULL_FAILED_DROP: L%d %s LSP is full and couldn't remove lower priority TLVs to make room for type %d TLV
Explanation There is no storage space left for routing information in the router\'s LSP, and an attempt to drop lower priority information has failed. Parameters are: Level, LSP Type, TLV Type
Recommended Action Configure IS-IS so that less information will be distributed in the router's LSP.
Error Message ISIS-4-LSPFULL_FORCED_DROP: L%d %s LSP is full, removed lower priority TLVs to make room for type %d TLV
Explanation There was no storage space left for important routing information in the router\'s LSP, and so lower priority information (e.g., redistributed prefixes) has been dropped to make room. Parameters are: Level, LSP Type, TLV Type
Recommended Action Configure IS-IS so that less information will be distributed in the router's LSP.
Error Message ISIS-4-LSPFULL: L%d %s LSP space is full
Explanation There is no storage space left for routing information in the router's LSP. Parameters are: Level, LSP Type
Recommended Action Configure IS-IS so that less information will be distributed in the router's LSP.
Error Message ISIS-4-MCAST_VLAN: Invalid Mcast-Interest message from Swid %u: start_vlan %u, end_vlan %u
Explanation IS-IS for FabricPath received a malformed update. Parameters are: Switch-ID, Start Vlan, End Vlan
Recommended Action No special action is required.
Error Message ISIS-4-NO_CID: Cannot allocate CID for %s\n - Over 255 LANs limit
Explanation IS-IS has been enabled on more than 255 broadcast interfaces and thus exceeded the protocol mandated limitation. Interfaces that are enabled beyond 255 will be ignored internally until the total count drops below 255. Parameters are: Interface Name
Recommended Action Disable IS-IS on one or more broadcast interfaces, or convert the interface to point-to-point mode.
Error Message ISIS-4-NO_MEM: No memory event detected
Explanation An attempt to allocate from free memory failed.
Recommended Action Out of memory. Add more memory to the router.
Error Message ISIS-4-P2P_DUP_SYSID: P2P IIH - Duplicate system ID %s detected over %s
Explanation IS-IS has detected another system on the indicated P2P that is reusing the local system ID. Parameters are: System ID, Interface Name
Recommended Action Configure either the local or remote router with a different system ID.
Error Message ISIS-4-PROC_NO_MEM: No memory event, shutting down process
Explanation Previously an allocation failed due to no available memory. IS-IS will shut down and wait for user to restart it.
Recommended Action Restart component.
Error Message ISIS-4-REDIST_MAX_ROUTE: Redistribution route limit has been reached - %d routes
Explanation ISIS redistribution: Max limit. Parameters are: Number of routes
Recommended Action No special action is required.
Error Message ISIS-4-REDIST_THR_ROUTE: Redistribution threshold has been reached - %d routes
Explanation ISIS redistribution: Threshold limit. Parameters are: Number of routes
Recommended Action No special action is required.
Error Message ISIS-4-SEQWRAP: Sequence number wraparound event detected
Explanation IS-IS has detected that an LSP's sequence number has wrapped. IS-IS will shut down and restart.
Recommended Action No special action is required.
Error Message ISIS-4-SR_INDEX_OUT_OF_NH_RANGE: Index %u for prefix %s (from %s) is out of srgb range of next-hop %s
Explanation Index Value advertised with Prefix too large for range of next-hop node. Parameters are: Index Value, IPv4/IPv6 prefix, System-ID, System-ID
Recommended Action No special action is required.
Error Message ISIS-5-ADJCHANGE: %s adj L%s %s over %s - %s on MT-%d
Explanation The indicated adjacency has changed state. Parameters are: Interface Type, Level, System ID, Interface Name, Reason
Recommended Action No special action is required.
Error Message ISIS-5-NH_DEL: Cleanup L%d route %s/%d has %s next hop
Explanation An unexpected but handleable event has occurred. Parameters are: Level, Address Prefix, Mask, Type
Recommended Action Keep running, do nothing special.
Error Message ISIS-5-PROC_SEQWRAP: Handle sequence number wraparound - disabling process for %d secs
Explanation An LSP's sequence number has wrapped, and the process will be disabled for the correct length of time. Parameters are: Time
Recommended Action No special action is required.
Error Message ISIS-5-SELF_RESTART: Fabricpath ISIS self-restarting due to %s %s %s
Explanation Fabricpath ISIS process is performing a self-restart. Parameters are: Self restart reason, reason detail, more detail
Recommended Action No special action is required.
Error Message ISIS-5-SHUTDOWN: ISIS process %s administratively %s
Explanation ISIS protocol was administratively up/shutdown.
Recommended Action No special action is required.
Error Message ISIS-6-JUMBO_PDU: Drop %hu bytes jumbo PDU with %hu bytes buffer from %s%s
Explanation IS-IS has received a packet that exceeds the maximum supported size. The packet will be dropped. Parameters are: Packet Length,PDU Maximum Size, Interface Name, Source Destination Addr
Recommended Action No special action is required.
Error Message ISIS-6-MODE_NO_FUNC: No callback function registered for %s in %s mode
Explanation IS-IS encountered a problem where no callback function has been registered in the given mode. Parameters are: Function name, Mode name
Recommended Action No special action is required.
Error Message ISIS-6-SEQWRAP_HOLDDOWN: Sequence number wraparound holddown timer expired - enable process
Explanation The correct amount of time has elapsed after an LSP's sequence number wrapped so that IS-IS can resume normal operation.
Recommended Action No special action is required.
Error Message ISIS-6-SHUTDOWN_FAILURE: Shutdown failure. Failed to %s - %s
Explanation IS-IS request to system manager for permission to shutdown was declined. Parameters are: Reason, Reason Code
Recommended Action No special action is required.
Error Message ISIS-6-START: Process start. Reason - %s
Explanation ISIS process start with specified reason. Parameters are: Reason
Recommended Action No special action is required.
Error Message ISIS-6-STOP: Process stop. Reason - %s
Explanation ISIS procss stop with specified reason. Parameters are: Reason
Recommended Action No special action is required.
Error Message ISIS-6-SWITCH_ROLE: User has set root priority for MT-%d
Explanation User set priority will over-ride role based priority. Parameters are: Topology-ID
Recommended Action No special action is required.
Error Message ISIS-6-SYSMAN_CLEANUP: Terminated by SYSMAN cleanup signal
Explanation IS-IS has been signaled to exit.
Recommended Action No special action is required.
Error Message ISIS-6-UNK_NLPID: Unrecognized NLP ID %02X from %s%s
Explanation IS-IS has received a packet with an NLPID which it does not recognize. The packet will be dropped. Parameters are: NLP Id, Interface Name, Source Destination Addr
Recommended Action No special action is required.
Error Message ISIS-6-UNK_PDU: Unrecognized PDU type %d from %s%s
Explanation IS-IS has received a packet of a type which it does not recognize. The packet will be dropped. Parameters are: PDU Type, Source Addr, Destination Addr
Recommended Action No special action is required.
This section contains the KSINK messages.
Error Message KSINK-3-API_FAILED_HA: %s - %s:No access to PSS database %p, data file: %s, uri: %s
Explanation ksink called an API that has failed. Parameters are: Failed Operation, ksink Function
Recommended Action No special action is required.
Error Message KSINK-3-API_FAILED: %s - failed in %s()
Explanation ksink called an API that has failed. Parameters are: Failed Operation, ksink Function
Recommended Action No special action is required.
Error Message KSINK-3-BUF_POOL: Pool 0x%p: double free of 0x%p attempted
Explanation Double free of buffer pool.
Recommended Action No special action is required.
Error Message KSINK-3-HA_INVALID_INDEX: HA %s sync message received for unknown PSS index %d
Explanation HA sync message from active SUP references invalid PSS index.
Recommended Action No special action is required.
Error Message KSINK-3-INVALID_ARG: invalid arguments - %s - in %s()
Explanation Invalid arguments passed in an ksink function. Parameters are: Invalid Argument, ksink Function
Recommended Action No special action is required.
Error Message KSINK-3-MEM_ALLOC: Malloc Failure in %s[%d] for size %d
Explanation Failed to allocate memory.
Recommended Action No special action is required.
Error Message KSINK-3-MEM_LOCK: mlockall failed, error %s
Explanation mmap API returned failure.
Recommended Action No special action is required.
Error Message KSINK-3-MTS: Error returned from %s, errno: 0x%08x (%s) in %s()
Explanation ksink called an MTS API which returned an error. Parameters are: Failed API, Error Code, Error Description, ksink Function
Recommended Action No special action is required.
Error Message KSINK-3-PSS_CLOSE: Could not close PSS file, %s
Explanation PSS API which returned an error.
Recommended Action No special action is required.
Error Message KSINK-3-PSS_CREATE: Could not create PSS file %s, %s
Explanation PSS API which returned an error.
Recommended Action No special action is required.
Error Message KSINK-3-PSS_DELETE_RANGE: PSS delete range failed, %s
Explanation PSS API which returned an error.
Recommended Action No special action is required.
Error Message KSINK-3-PSS_DELETE: PSS delete failed, %s
Explanation PSS API which returned an error.
Recommended Action No special action is required.
Error Message KSINK-3-PSS_DESTROY: Could not destroy PSS file %s, %s
Explanation PSS API which returned an error.
Recommended Action No special action is required.
Error Message KSINK-3-PSS_GETPARAM: Could not retrieve PSS paramaeters, %s
Explanation PSS API which returned an error.
Recommended Action No special action is required.
Error Message KSINK-3-PSS_HA: %s, %s
Explanation PSS API which returned an error.
Recommended Action No special action is required.
Error Message KSINK-3-PSS_OPEN: Could not open PSS file %s, %s
Explanation PSS API which returned an error.
Recommended Action No special action is required.
Error Message KSINK-3-PSS_PURGE: PSS purge failed, %s
Explanation PSS API which returned an error.
Recommended Action No special action is required.
Error Message KSINK-3-PSS_SET_DBSIZE: Could not set database size %d for PSS file %s, %s
Explanation PSS API which returned an error.
Recommended Action No special action is required.
Error Message KSINK-3-PSS_SNAPSHOT: PSS snapshot failed for %s, %s
Explanation PSS API which returned an error.
Recommended Action No special action is required.
Error Message KSINK-3-PSS_UPDATE: PSS update failed, %s
Explanation PSS API returned an error.
Recommended Action No special action is required.
Error Message KSINK-3-RANDOM_SEED: Failed to set random seed
Explanation random seed API returned failure.
Recommended Action No special action is required.
Error Message KSINK-3-RRM: Error returned from %s, errno: 0x%08x (%s) in %s()
Explanation ksink called an resource manager API which returned an error. Parameters are: Failed API, Error Code, Error Description, ksink Function
Recommended Action No special action is required.
Error Message KSINK-3-SETRLIMIT: Failed to open client shared memory \%s\: %s
Explanation The calling process failed with the shown error while trying to open the named U6RIB shared memory region. The status of the memory is shown in 'show process memory shared'. Parameters are: Name of shared memory region
Recommended Action Restart component.
Error Message KSINK-3-TBUCKET: current time: %f , last update: %f
Explanation time stamp API returned an error.
Recommended Action No special action is required.
Error Message KSINK-6-HA_SEQNO_SYNC: HA sequence number sync to standby failed, %s
Explanation HA sequence number sync to standby failed.
Recommended Action No special action is required.
Error Message KSINK-6-HA_SYNC: HA sync to standby failed, %s
Explanation HA sync message to standby failed.
Recommended Action No special action is required.
Error Message KSINK-6-HA_UNINITIALIZED: ksink HA library not initialized, %s invoked
Explanation Service should provide its own high availability switchover callbacks.
Recommended Action No special action is required.
Error Message KSINK-6-MTS_UNK_OPC: Received unknown MTS message on %s queue with opcode %d
Explanation URIB recieved an unknown message. The message is dropped.
Recommended Action No special action is required.
This section contains the L2F messages.
Error Message L2F-2-APIINIT: Unable to initialize %s API
Explanation As self-explained by the message itself.
Recommended Action Reload the stack.
Error Message L2F-2-APIREGISTER: Unable to register with %s
Explanation As self-explained by the message itself.
Recommended Action Reload the stack.
Error Message L2F-2-SHMATTACH: Unable to attach to shared memory %s
Explanation As self-explained by the message itself.
Recommended Action Reload the stack.
Error Message L2F-2-SHMCREATE: Unable to create shared memory %s error %d
Explanation As self-explained by the message itself.
Recommended Action Reload the stack.
Error Message L2F-2-SUPERADD: Unable to add super member %s to %s
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-2-THRCREATE: unable to create thread %s: %d
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-BADSIG: Should not have received signal %d
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-CREATENBR: Couldn't add neighbor %s on %s error %d
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-DELETEIF: Could not delete interface on %s error %d
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-DISABLEIF: Could not disable interface on %s error %d
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-ENABLEIF: Could not enable interface on %s error %d
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-ERROR: %s
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-GETHOSTNAME: gethostname() failed with errno %d
Explanation As self-explained by the message itself.
Recommended Action Reload the stack.
Error Message L2F-3-IF_CLR_EXT_FAIL: Could not clear interface on %s
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-IF_SET_EXT_FAIL: Could not set interface on %s
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-INIT: L2F initialization failed %s
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-MSGBADMINOR: Unrecognized minor message %d
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-MTS_BIND: Error returned from mts_bind() for %s, errno: %s
Explanation L2F called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message L2F-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation L2F called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message L2F-3-MTS_RECV: Error returned from mts_recv(), errno: %s
Explanation L2F called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message L2F-3-MTS_UNKNOWN_MSG: Unknown error returned from MTS, errno: %d
Explanation L2F called a MTS API which returned an unknown error.
Recommended Action Dump core, then restart component.
Error Message L2F-3-NOMEM: malloc (%d) failed for: %s
Explanation As self-explained by the message itself.
Recommended Action add more memory to the router.
Error Message L2F-3-RXCHKSUM: Bad checksum packet on interface %s
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-RXCOPY: Copy packet error 0x%08x copy %hu bytes packet from %s:%s
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-RXJUMBO: Jumbo packet %hu bytes jumbo PDU with %hu bytes buffer from %s:%s
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-RXPARSE_BAD_IM_IOD: packets received from invalid interface (possibly just deleted)
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-RXPARSE_BAD_L2F: packets received from invalid L2F interface (possibly just deleted)
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-RXPARSE_BAD_NBR_TLV: Bad-formed neighbor name TLV
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-RXPARSE_BAD_ROUTER_TLV: Bad-formed router name TLV
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-RXPARSE_ETHER_ADDR_TLV_LEN: Bad Ethernet Address TLV in packet, len = %d
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-RXPARSE_ETHER_ADDR_TLV_NONE: No Ethernet Address TLV in packet
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-RXPARSE_NBR_TLV_LEN: Bad Neighbor Name TLV in packet, len = %d
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-RXPARSE_NBR_TLV_NULL_TERM: Neighbor Name TLV is not NULL terminated
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-RXPARSE_ROUTER_TLV_DUP: Duplicate Router Name TLV in packet
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-RXPARSE_ROUTER_TLV_LEN: Bad Router Name TLV in packet, len = %d
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-RXPARSE_ROUTER_TLV_NONE: No Router Name TLV in packet
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-RXPARSE_ROUTER_TLV_NULL_TERM: Router Name TLV is not NULL terminated
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-RXPARSE_ROUTER_TLV_OURS: Misconfigured router, has our name %s
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-RXTRUNC: Received truncated packet, expected %hu bytes, got %hu bytes from %s:%s
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-SYSMGR_DISPATCH: Error returned from sysmgr_dispatch(), errno: %s
Explanation L2F called a System Manager API which returned an error.
Recommended Action Dump core, then restart component.
Error Message L2F-3-TXCOPY: Copy packet error 0x%08x copy %hu bytes
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-TXENCAP_FAIL: Encapsulation failed on interface %d
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-3-TXOUTPUT_FAIL: Output failed on interface %d
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-6-BFINIT: Can't initialize plp debugging bits
Explanation As self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message L2F-6-INFORMATION: %s
Explanation Informational messages as self-explained by the message itself.
Recommended Action No special action is required.
Error Message L2F-6-PKTBUFFER: %s
Explanation As self-explained by the message itself.
Recommended Action No special action is required.
This section contains the LDP messages.
Error Message LDP-2-INITFAIL: Failure to create/initialize %s
Explanation During startup there were problems initializing local resources (data structures, MQ, shared memory).
Recommended Action No special action is required.
Error Message LDP-2-REGISTERFAIL: Failure to communicate with other components, error: %s failure
Explanation During startup there were problems in establishing communication channels with other components.
Recommended Action No special action is required.
Error Message LDP-2-THREADFAIL: Error creating thread %s (error %d)
Explanation LDP was unable to spawn a thread. The thread name and the error is printed in the message.
Recommended Action No special action is required.
Error Message LDP-3-ALLOCFAIL: Failure to allocate %s (%s)
Explanation LDP encountered a memory allocation failure.
Recommended Action No special action is required.
Error Message LDP-3-APIFAIL: Failed API call to %s for %s (%s)
Explanation An API call of the mentioned component failed. Information about the API call is printed in the syslog message.
Recommended Action No special action is required.
Error Message LDP-3-BADARG: Bad argument error: %s
Explanation A function call received an unexpected argument.
Recommended Action No special action is required.
Error Message LDP-3-BADMSG: BAD IPC message: %s
Explanation LDP received a message which has incorrect or unexpected information.
Recommended Action No special action is required.
Error Message LDP-3-FECLIST: Error: %s, FEC: %s
Explanation Error in adding/removing FEC struction from local data structures.
Recommended Action No special action is required.
Error Message LDP-3-FECNHUPD: Unable to add/update FEC Next-Hop information for FEC %s
Explanation Unable to create downstream label binding data structure (FEC NH).
Recommended Action No special action is required.
Error Message LDP-3-HALTPEERS: Unable to allocate memory for operation, shutting down all sessions
Explanation LDP is halts all peers when it runs out of memory.This message indicates this no memory condition.
Recommended Action No special action is required.
Error Message LDP-3-LISTERR: List Error: %s, operation: %s
Explanation LDP encountered an error in its internal list manipulation function.
Recommended Action No special action is required.
Error Message LDP-3-MBUFFAIL: MBUF failure: %s
Explanation LDP encounted an error while performing MBUF operation.
Recommended Action No special action is required.
Error Message LDP-3-MISCERR: Miscellaneous error: %s
Explanation These are miscellaneous errors. The message explains it all.
Recommended Action No special action is required.
Error Message LDP-3-MQSENDERR: Unable to send message, MQ name: %s
Explanation LDP is unable to send an IPC message to the specified message queue.
Recommended Action No special action is required.
Error Message LDP-3-MTS_BIND: Error returned from mts_bind(), errno: %s
Explanation LDP called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message LDP-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation LDP called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message LDP-3-MTS_RECV: Error returned from mts_recv(), errno: %s
Explanation LDP called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message LDP-3-MTS_UNKNOWN_MSG: Unknown error returned from MTS, errno: %d
Explanation LDP called a MTS API which returned an unknown error.
Recommended Action Dump core, then restart component.
Error Message LDP-3-PCLERR: PCL error: %s, PCL name: %s
Explanation Error in PCL processing, error string indicates the specific error and the PCL name.
Recommended Action No special action is required.
Error Message LDP-3-PWEREGFAIL: PWE3 registeration failed: %s
Explanation PWE could not talk to LDP, reason specified in message.
Recommended Action No special action is required.
Error Message LDP-3-SESSERR: Session Error: %s, session %s
Explanation LDP encountered an error when talking with a particular neighbor.
Recommended Action No special action is required.
Error Message LDP-3-SESSFECERR: Unable to insert FEC %s from %s to session FEC db
Explanation Error in inserting downstream label binding info in local data structure.
Recommended Action No special action is required.
Error Message LDP-3-SESSLIST: Error: %s, Session: %s
Explanation Error in adding/removing session structure from local data structures.
Recommended Action No special action is required.
Error Message LDP-3-SESSNHERR: Unable to create session next-hop for session %s
Explanation Unable creating next hop information given by this neighbor.
Recommended Action No special action is required.
Error Message LDP-3-SNMPFILLFAIL: SNMP failure, failed to fill %s in %s request
Explanation LDP encounted an error while trying to fill a response to an SNMP query.
Recommended Action No special action is required.
Error Message LDP-3-SOCKETERR: Socket Error: %s, Socket: %d, Session: %s, Errno: %d
Explanation LDP encountered an error when performing a socket operation.
Recommended Action No special action is required.
Error Message LDP-3-SYSMGR_DISPATCH: Error returned from sysmgr_dispatch(), errno: %s
Explanation LDP called a System Manager API which returned an error.
Recommended Action Dump core, then restart component.
Error Message LDP-3-UDPLENERR: Wrong UDP length %d
Explanation LDP received a corrupt UDP message with a wrong length.
Recommended Action No special action is required.
Error Message LDP-3-UNKNOWNMSG: Received unknown IPC message major/minor: %d:%d
Explanation LDP received an IPC message which it does not know how to handle. It ignores this message.
Recommended Action No special action is required.
Error Message LDP-4-DUPLABEL: Neighbor advertised duplicate label for PW FEC %s
Explanation LDP received a duplicate label for a FEC from a peer.
Recommended Action No special action is required.
Error Message LDP-4-LABELERR: Received label release without label from session %s
Explanation LDP received a label release without a label from peer.
Recommended Action No special action is required.
Error Message LDP-4-LABELRELERR: Invalid label %d in label release message for fec %s from %s
Explanation LDP received an invalid label from a peer.
Recommended Action No special action is required.
Error Message LDP-4-MSGGENFAIL: Unable to format message to %s, error %s
Explanation LDP was unable to format a message to a peer.
Recommended Action No special action is required.
Error Message LDP-4-SHUTFAIL: Failed to shutdown: %s
Explanation An operation failed during shutting down.
Recommended Action No special action is required.
Error Message LDP-6-INFORM: %s
Explanation Informational message.
Recommended Action No special action is required.
This section contains the LISP messages.
Error Message LISP-2-SHM_LOCK_CREAT: Failed to create shared memory lock: %s
Explanation INITIALIZATION_FAILURE_EXPLANATION.
Recommended Action Reload the stack.
Error Message LISP-3-API_INIT: Couldn't initialize %s API
Explanation LISP failed to open API to interact with the component.
Recommended Action No special action is required.
Error Message LISP-3-COMP_DEREG: Unable to de-register with %s
Explanation LISP failed to de-register with a server component.
Recommended Action No special action is required.
Error Message LISP-3-COMP_REG: Unable to register with %s
Explanation LISP failed to register with a server component.
Recommended Action Dump core, then restart component.
Error Message LISP-3-LIB_API_INIT: Couldn't initialize %s API
Explanation LISP failed to open API to interact with the component.
Recommended Action No special action is required.
Error Message LISP-3-LISP_INIT: LISP init failed: %s
Explanation LISP process initialization failed.
Recommended Action Dump core, then restart component.
Error Message LISP-3-MAC_FAILED: netcfg_change_mac_address() failed, return status: %d
Explanation LISP could not change MAC address for an LISP-VM interface. Parameters are: Return Code
Recommended Action No special action is required.
Error Message LISP-3-MALLOC: Private mem malloc (%u) failed in %s
Explanation LISP process is out of free private memory.
Recommended Action Configure the network or router to decrease the number of routes.
Error Message LISP-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation LISP called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message LISP-3-MTS_FAILED: %s failed in %s, errno: %s, for %s
Explanation LISP process failed to access the mts-queue. Parameters are: MTS Operation, Function, errno, MTS Queue
Recommended Action No special action is required.
Error Message LISP-3-MTS_RECV: Error returned from mts_recv(), errno: %s
Explanation LISP called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message LISP-3-MTS_SEND: Error returned from mts_send(), errno: %s
Explanation LISP called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message LISP-3-NO_SET_PRIORITY: Failed to set policy or priority
Explanation LISP process could not set itself process priority, exiting.
Recommended Action No special action is required.
Error Message LISP-3-OPCODE_REG: Could not register opcode 0x%x, reason %s
Explanation Unable to register opcodes. Parameters are: MTS Opcode, Error string
Recommended Action Dump core, then restart component.
Error Message LISP-3-PT_ADD: Couldn't add %s to Patricia Trie
Explanation LISP failed to update Patricia Trie.
Recommended Action No special action is required.
Error Message LISP-3-PT_DEL: Couldn't delete %s from Patricia Trie
Explanation LISP failed to delete entry from Patricia Trie.
Recommended Action No special action is required.
Error Message LISP-3-RLIMIT: Couldn't set LISP data segment size to %u
Explanation LISP process could not set itself memory resource limit, exiting.
Recommended Action No special action is required.
Error Message LISP-3-SHARED_DB_PUB_INIT: Could not do shared database publisher initialization for interfaces rc=0x%x [%s]
Explanation Unable to do shared db publisher initialization. Parameters are: Status Error, Syserror string
Recommended Action Dump core, then restart component.
Error Message LISP-3-SLAB_CREATE: Slab alloc of type %s failed
Explanation LISP process failed to allocate Slab memory.
Recommended Action Configure the network or router to decrease the number of routes.
Error Message LISP-3-SM_CLOSE: Couldn't close shm segment %s
Explanation LISP process failed to remove shared memory resource.
Recommended Action No special action is required.
Error Message LISP-3-SM_CREATE: Couldn't create shm segment %s
Explanation LISP process failed to initialize shared memory resource.
Recommended Action Dump core, then restart component.
Error Message LISP-3-SM_OPEN: Couldn't open shm segment %s
Explanation LISP process failed to initialize shared memory resource.
Recommended Action Dump core, then restart component.
Error Message LISP-3-SMALLOC: Shared mem malloc (%s) failed in %s
Explanation LISP process is out of free shared memory.
Recommended Action Configure the network or router to decrease the number of routes.
Error Message LISP-3-SUBCR_INIT: Could not initialize shared database client for interfaces rc=0x%x [%s]
Explanation Unable to do subscriber init to access IM shared-dbs. Parameters are: Status Error, Syserror string
Recommended Action Dump core, then restart component.
Error Message LISP-3-TIMER_SET_INIT: Couldn't init %s active timer set
Explanation LISP failed to initialize timer resource.
Recommended Action Dump core, then restart component.
Error Message LISP-3-UNKNOWN_MTYPE: Unknown mtype: %d/%d in %s
Explanation LISP process received unknown Interprocess message, dropped.
Recommended Action No special action is required.
Error Message LISP-6-DYNAMIC_EID_DISCOVERED: Roaming EID %s prefix %s discovered on interface %s
Explanation A new dynamic EID has shown up in the ETR. Parameters are: Dynamic EID
Recommended Action No special action is required.
Error Message LISP-6-MAP_CACHE_CLEARED: %s Map-cache cleared
Explanation LISP Map-cache cleared by user. Parameters are: Prefix of the EID for which the map-cache entry is cleared
Recommended Action No special action is required.
Error Message LISP-6-RESTART_REASON: LISP process has restarted, restart reason: %s\n
Explanation LISP is restoring the routes it had added in previous instance.
Recommended Action No special action is required.
Error Message LISP-6-SHUTDOWN_SELF: LISP shutting self down
Explanation LISP process is shutting itself down.
Recommended Action No special action is required.
Error Message LISP-6-SHUTDOWN: Shutting down LISP process
Explanation LISP received a shutdown request.
Recommended Action No special action is required.
Error Message LISP-6-UFDM_REGACK_FAILED: Received IPC message from UFDM, Register-Ack failed
Explanation LISP process received unknown Interprocess message from the UFDM process, dropped.
Recommended Action No special action is required.
Error Message LISP-6-UNKNOWN_OPC_UFDM: Received unknown UFDM mts opcode %d
Explanation LISP process received unknown Interprocess message from the UFDM process, dropped.
Recommended Action No special action is required.
Error Message LISP-6-UNKNOWN_OPC: Received unknown mts opcode %d
Explanation LISP process received unknown Interprocess message, dropped.
Recommended Action No special action is required.
This section contains the MCASTFWD messages.
Error Message MCASTFWD-2-SHM_LOCK_CREAT: Failed to create shared memory lock: %s
Explanation INITIALIZATION_FAILURE_EXPLANATION. Parameters are: Error Name
Recommended Action Reload the stack.
Error Message MCASTFWD-2-STARTUP_FAILURE: Startup failure: %s
Explanation An unrecoverable software error has occurred during MCASTFWD startup. Parameters are: Failure reason
Recommended Action No special action is required.
Error Message MCASTFWD-3-ALREADY_RUNNING: MCASTFWD already running, exiting
Explanation Another MCASTFWD process is already running, this process will shutdown.
Recommended Action No special action is required.
Error Message MCASTFWD-3-API_FAILED: %s failed in %s
Explanation MCASTFWD process failed in invoking an API. Parameters are: API name, Function name
Recommended Action No special action is required.
Error Message MCASTFWD-3-AVL_ERROR: AVL-tree operation %s failed for %s
Explanation MCASTFWD process failed in an AVL-tree manipulation. Parameters are: AVL tree operation, Tree name
Recommended Action No special action is required.
Error Message MCASTFWD-3-BAD_MSG: Invalid %s message received from %s
Explanation MCASTFWD received an invalid MTS message. Parameters are: Message type, Process name
Recommended Action Dump core, then restart component.
Error Message MCASTFWD-3-BF_CREATE: Couldn't create bitfield for %s
Explanation MCASTFWD failed to create bitfield resource. Parameters are: Data type
Recommended Action Dump core, then restart component.
Error Message MCASTFWD-3-BITFIELD_FAILED: %s failed in %s
Explanation MCASTFWD process could not execute the bitfield operation. Parameters are: Bitfield operation, Function name
Recommended Action Dump core, then reload the stack.
Error Message MCASTFWD-3-CV_INIT: Couldn't init cond var %s
Explanation MCASTFWD process failed to initialize conditional-variable resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message MCASTFWD-3-GETRLIMIT_FAILED: Address Space size retrieval failed, reason %s
Explanation MCASTFWD process could not retrieve memory resource limit.
Recommended Action No special action is required.
Error Message MCASTFWD-3-GROUP_PREFIX_IGNORE: Too many Groups in Group Prefix %s. Specify the prefix within /24
Explanation GPrefix yiels too many Groups. Parameters are: Group Prefix
Recommended Action No special action is required.
Error Message MCASTFWD-3-GROUP_RANGE_IGNORE: Too many Groups in Group Range %s - %s
Explanation Group Range yields too many Groups. Parameters are: Start Group, End Group
Recommended Action No special action is required.
Error Message MCASTFWD-3-HA_DB_REBUILD: HA run-time database buildup %s
Explanation MCASTFWD-SNOOP stateful restart status. Parameters are: State description
Recommended Action No special action is required.
Error Message MCASTFWD-3-HA_GROUP: HA %s operation in vlan %d failed for (%s, %s)
Explanation MCASTFWD-SNOOP called an PSS API which returned an error. Parameters are: Operation type, Vlan-id, Group, Source
Recommended Action
Error Message MCASTFWD-3-HA_OIF: HA %s operation on OIF %s for (%s, %s) in vlan %d failed
Explanation MCASTFWD-SNOOP called an PSS API which returned an error. Parameters are: Operation type, Interface, Group, Source, Vlan-id
Recommended Action
Error Message MCASTFWD-3-HA_RPORT: HA %s operation on router-port %s for vlan %d failed
Explanation MCASTFWD-SNOOP called an PSS API which returned an error. Parameters are: Operation type, Interface, Vlan-id
Recommended Action
Error Message MCASTFWD-3-HA_VLAN: HA %s operation for vlan %d failed
Explanation MCASTFWD-SNOOP called an PSS API which returned an error. Parameters are: Operation type, Vlan-id
Recommended Action
Error Message MCASTFWD-3-IM_API_FAILED: %s failed in %s
Explanation IM API failed in MCEC MCASTFWD Snoop. Parameters are: API name, Function name
Recommended Action No special action is required.
Error Message MCASTFWD-3-INVALID_OIF_LIST: MCASTFWD Snooping invalid OIF list %s with %d iods in %s
Explanation MCASTFWD-SNOOP has invalid number of iods. Parameters are: OIF list, OIF count, Function name
Recommended Action
Error Message MCASTFWD-3-LIB_API_FAILED: %s failed in %s
Explanation Process failed in invoking MCASTFWD API. Parameters are: API name, Function name
Recommended Action No special action is required.
Error Message MCASTFWD-3-LIB_API_INIT: Couldn't initialize %s API
Explanation MCASTFWD failed to open API to interact with the component. Parameters are: Component Name
Recommended Action No special action is required.
Error Message MCASTFWD-3-LIB_MALLOC: Private mem malloc (%lu) failed in %s
Explanation Process is out of free private memory. Parameters are: Type of malloc(size), Function Name
Recommended Action Configure the network or router to decrease the number of routes.
Error Message MCASTFWD-3-LIB_MTS_FAILED: %s failed in %s, errno: %s
Explanation Process failed to access the MCASTFWD MTS-queue. Parameters are: MTS IPC operation, Function name, Error ID
Recommended Action No special action is required.
Error Message MCASTFWD-3-LIB_SM_CLOSE: Couldn't close shm segment %s
Explanation MCASTFWD process failed to remove shared memory resource. Parameters are: Shared Memory Segment Name
Recommended Action No special action is required.
Error Message MCASTFWD-3-LIB_SM_OPEN: Couldn't open shm segment %s
Explanation MCASTFWD process failed to initialize shared memory resource. Parameters are: Shared Memory Segment Name
Recommended Action Dump core, then restart component.
Error Message MCASTFWD-3-LVPORT_CREATE: MCASTFWD Snooping couldn't create an leave-port in %s for group %s
Explanation MCASTFWD-SNOOP called an API which returned an error. Parameters are: Vlan ID, Group address
Recommended Action
Error Message MCASTFWD-3-MALLOC_FAILED: %s failed in %s
Explanation MCASTFWD process is out of free memory. Parameters are: Structure type, Function name
Recommended Action Configure the network or router to decrease the number of routes.
Error Message MCASTFWD-3-MCASTFWD_INIT: MCASTFWD init failed: %s
Explanation MCASTFWD process initialization failed. Parameters are: Failure reason
Recommended Action Dump core, then restart component.
Error Message MCASTFWD-3-MFDM_NO_BUF: Cannot find MFDM buffer from route-ack for xid 0x%x
Explanation MCASTFWD process could not find a route buffer in it's queue from the MFDM message, ignored.
Recommended Action No special action is required.
Error Message MCASTFWD-3-MFWD_NO_MEM: Failed to allocate private memory for %s
Explanation The MCASTFWD process has run out of private memory.
Recommended Action Report the issue to Customer Support.
Error Message MCASTFWD-3-MTS_BIND: Error returned from mts_bind() for %s mts-q, errno: %s
Explanation MCASTFWD called a MTS API which returned an error. Parameters are: MTS Queue name, Error description
Recommended Action Dump core, then restart component.
Error Message MCASTFWD-3-MTS_DROP: Error returned from mts_drop() for %s queue, errno: %s
Explanation MCASTFWD called a MTS API which returned an error. Parameters are: MTS Queue name, Error description
Recommended Action Dump core, then restart component.
Error Message MCASTFWD-3-MTS_INIT: Error returned from mts_callback_handler_set() for %s queue, errno: %s
Explanation MCASTFWD called a MTS API which returned an error. Parameters are: MTS Queue name, Error description
Recommended Action Dump core, then restart component.
Error Message MCASTFWD-3-MTS_RECV: Error returned from mts_recv() for %s queue, errno: %s
Explanation MCASTFWD called a MTS API which returned an error. Parameters are: MTS Queue name, Error description
Recommended Action Dump core, then restart component.
Error Message MCASTFWD-3-MTS_SEND: Error returned from mts_send() for %s queue, errno: %s
Explanation MCASTFWD called a MTS API which returned an error. Parameters are: MTS Queue name, Error description
Recommended Action Dump core, then restart component.
Error Message MCASTFWD-3-MUTEX_INIT: Couldn't init mutex %s
Explanation MCASTFWD process failed to initialize mutex system resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message MCASTFWD-3-NO_MBUF: Failed to allocate mbuf %s
Explanation The MCASTFWD process has run out of network buffers.
Recommended Action Report the issue to Customer Support.
Error Message MCASTFWD-3-NO_SET_PRIORITY: Failed to set policy or priority
Explanation MCASTFWD process could not set itself process priority, exiting.
Recommended Action No special action is required.
Error Message MCASTFWD-3-NO_SH_MEM: Failed to allocate shared memory %s
Explanation The MCASTFWD process has run out of shared memory. Parameters are: Allocation type
Recommended Action Report the issue to Customer Support.
Error Message MCASTFWD-3-NO_SHUTDOWN: Unable to shutdown %s
Explanation MCASTFWD process unable to shut itself down. Parameters are: Shutdown error information
Recommended Action Dump core, then restart component.
Error Message MCASTFWD-3-PT_ADD: Couldn't add element to PT %s
Explanation MCASTFWD failed to update the local snooping-db entry. Parameters are: Patricia tree name
Recommended Action No special action is required.
Error Message MCASTFWD-3-PT_DEL: Couldn't delete element from PT %s
Explanation MCASTFWD failed to delete the local snooping-db entry. Parameters are: Patricia tree name
Recommended Action No special action is required.
Error Message MCASTFWD-3-PTHREAD_FAILED: %s failed in %s for thread %s
Explanation MCASTFWD process failed to create a task thread. Parameters are: Pthread operation, Function name, Thread name
Recommended Action Dump core, then restart component.
Error Message MCASTFWD-3-PULLUP_FAILED: m_pullup() of %d bytes failed in %s
Explanation MCASTFWD process failed to process the packet, dropping it. Parameters are: Byte count, Function name
Recommended Action No special action is required.
Error Message MCASTFWD-3-QUERIER_START_FAILED: %s failed in %s
Explanation MCASTFWD snoop failed to start the querier. Parameters are: Function name, Function name
Recommended Action No special action is required.
Error Message MCASTFWD-3-RCOUNT_DELETE: Route count delete failed for %s
Explanation MCASTFWD called an API which returned an error. Parameters are: Interface
Recommended Action
Error Message MCASTFWD-3-RCOUNT_UPDATE: Route count update failed for %s
Explanation MCASTFWD called an API which returned an error. Parameters are: Interface
Recommended Action
Error Message MCASTFWD-3-RDLOCK_ASSERT: %s:%d: Assert, read-lock not acquired
Explanation Caller Failed to get MCASTFWD Shared Memory read lock. Parameters are: Function Name, Line
Recommended Action No special action is required.
Error Message MCASTFWD-3-RESERVE_LIMIT: Exceeded reserve-limit for interface %s - dropping
Explanation Exceeded the reserve-limit for interface. Parameters are: Interface
Recommended Action No special action is required.
Error Message MCASTFWD-3-RESTART_REASON: MCASTFWD process has restarted, restart reason: %s\n
Explanation MCASTFWD is restoring the routes it had added in previous instance. Parameters are: Restart reason
Recommended Action No special action is required.
Error Message MCASTFWD-3-RPORT_UPDATE: Router-port update failed for %s (%s)
Explanation MCASTFWD-SNOOP called an API which returned an error. Parameters are: Interface, Vlan ID
Recommended Action
Error Message MCASTFWD-3-SETRLIMIT_FAILED: Address space size increment of %ld failed, reason %s
Explanation MCASTFWD process could not set itself memory resource limit. Parameters are: Number of bytes
Recommended Action No special action is required.
Error Message MCASTFWD-3-SLAB_CREATE: Slab alloc of type %s failed
Explanation MCASTFWD process failed to allocate Slab memory. Parameters are: Structure Type
Recommended Action Configure the network or router to decrease the number of routes.
Error Message MCASTFWD-3-SMALLOC: Shared mem malloc (%lu) failed in %s
Explanation MCASTFWD process is out of free shared memory. Parameters are: Type of malloc(size), Function Name
Recommended Action Configure the network or router to decrease the number of routes.
Error Message MCASTFWD-3-STATE_LIMIT: Exceeded state-limit for interface %s - dropping
Explanation Exceeded the state-limit for interface. Parameters are: Interface
Recommended Action No special action is required.
Error Message MCASTFWD-3-SYSMGR_DISPATCH: Error returned from sysmgr_dispatch(), errno: %s
Explanation MCASTFWD called a System Manager API which returned an error. Parameters are: Error description
Recommended Action Dump core, then restart component.
Error Message MCASTFWD-3-TIMER_FAILED: %s failed for %s in %s
Explanation MCASTFWD process failed to configure a timer event. Parameters are: Timer operation, Timer name, Function name
Recommended Action Dump core, then restart component.
Error Message MCASTFWD-3-TXLIST_CREATE: Couldn't create txlist for %s
Explanation MCASTFWD failed to create txlist resource. Parameters are: Data type
Recommended Action Dump core, then restart component.
Error Message MCASTFWD-3-UNKNOWN_MTYPE: Unknown mtype: %d/%d in %s with opcode %d
Explanation MCASTFWD process received unknown Interprocess message, dropped. Parameters are: Major ID, Minor ID, Function name
Recommended Action No special action is required.
Error Message MCASTFWD-3-VLAN_EXISTS: SNOOP: Couldn't create %s, already esists
Explanation MCASTFWD failed to create vlan resource. Parameters are: VLAN ID
Recommended Action No special action is required.
Error Message MCASTFWD-3-vPC_API_FAILED: %s%s
Explanation API failed in vPC MCASTFWD snoop module. Parameters are: Error message, Error
Recommended Action No special action is required.
Error Message MCASTFWD-3-vPC_ERROR: %s%s
Explanation vPC related messages. Parameters are: vPC related message, Error message
Recommended Action No special action is required.
Error Message MCASTFWD-3-VRF_CREATE: MCASTFWD VRF creation failed for vrf %s
Explanation MCASTFWD process could not create the VRF context. Parameters are: VRF name
Recommended Action Dump core, then reload the stack.
Error Message MCASTFWD-6-AS_LIMIT_INCREASED: Address space size for %s increased %d times
Explanation MCASTFWD process incremented AS memory resource limit. Parameters are: Module name, Increment count
Recommended Action No special action is required.
Error Message MCASTFWD-6-HA_SEQNO_SYNC: HA sequence number sync to standby failed, %s
Explanation MCASTFWD-SNOOP HA sequence number sync to standby failed. Parameters are: Error description
Recommended Action No special action is required.
Error Message MCASTFWD-6-HA_STATEFUL: Stateful HA %s
Explanation MCASTFWD-SNOOP stateful restart status. Parameters are: State description
Recommended Action No special action is required.
Error Message MCASTFWD-6-HA_SYNC: HA sync to standby failed, %s
Explanation MCASTFWD-SNOOP HA sync message to standby failed. Parameters are: Error description
Recommended Action No special action is required.
Error Message MCASTFWD-6-RECEIVE_QUERY: Received %s interface %s from %s
Explanation MCASTFWD version mismatch, query still processed. Parameters are: MCASTFWD version mismatch, Interface, Source address
Recommended Action No special action is required.
Error Message MCASTFWD-6-REG_SEND_MSG: Suppress PIM Data Register for (%s, %s) due to suppression-timer\n
Explanation Suppress PIM Data Register due to suppression-timer. Parameters are: Source address, Group address
Recommended Action No special action is required.
Error Message MCASTFWD-6-RESERVE_LIMIT_WARNING: Exceeded 80 percent of the reserve-limit for interface %s
Explanation Exceeded 80 percent of the reserve-limit for interface. Parameters are: Interface
Recommended Action No special action is required.
Error Message MCASTFWD-6-RESTART_SHUTDOWN: MCASTFWD shutting self down via restart command
Explanation MCASTFWD process is shutting itself down due to the restartcommand.
Recommended Action No special action is required.
Error Message MCASTFWD-6-SHUTDOWN: MCASTFWD shutting self down
Explanation MCASTFWD process is shutting itself down.
Recommended Action No special action is required.
Error Message MCASTFWD-6-STATE_LIMIT_WARNING: Exceeded 80 percent of the state-limit for interface %s
Explanation Exceeded 80 percent of the state-limit for interface. Parameters are: Interface
Recommended Action No special action is required.
Error Message MCASTFWD-6-UNKNOWN_OPC: Received unknown mts opcode %d
Explanation MCASTFWD process received unknown Interprocess message, dropped. Parameters are: Operation Code
Recommended Action No special action is required.
This section contains the MPLSFWD messages.
Error Message MPLSFWD-3-API_FAILED: %s
Explanation MPLSFWD API failed.
Recommended Action No special action is required.
Error Message MPLSFWD-3-MALLOC_FAILED: %s failed in %s
Explanation MPLSFWD process is out of free memory.
Recommended Action No special action is required.
Error Message MPLSFWD-3-MBUF_FAILED: %s failed in %s (%d bytes)
Explanation MPLSFWD process is out of mbufs.
Recommended Action No special action is required.
Error Message MPLSFWD-3-MTS_FAILED: %s failed in %s, errno: %s
Explanation MPLSFWD failed to access mts-queue resource.
Recommended Action No special action is required.
This section contains the MPLSOAM messages.
Error Message MPLSOAM-3-XDR_COMM: %s:0x%x 0x%x
Explanation Comm module - unexpected oce return code encountered.
Recommended Action LOG_STD_ACTION.
This section contains the MSDP messages.
Error Message MSDP-2-NO_ENQUEUE: Unable to enqueue send element for peer %s
Explanation MSDP process failed to send a message over the TCP socket to peer. Parameters are: Peer IP address
Recommended Action No special action is required.
Error Message MSDP-2-NO_LISTEN_SOCKET: Fatal error, can't get listen socket setup in %s
Explanation MSDP process failed to obtain TCP packet. Parameters are: Function name
Recommended Action Dump core, then restart component.
Error Message MSDP-2-OUT_OF_SYNC_TCP_LEN: TCP data stream may be out of sync, suspect TLV length of %d from peer %s
Explanation MSDP process received invalid packet length from peer. Parameters are: TLV length, Peer IP address
Recommended Action No special action is required.
Error Message MSDP-2-OUT_OF_SYNC_TCP_TYPE: TCP data stream may be out of sync, suspect TLV type of %d from peer %s
Explanation MSDP process received malformed TLV from peer. Parameters are: TLV type, Peer IP address
Recommended Action No special action is required.
Error Message MSDP-2-SEND_BYTES_MISMATCH: Bytes sent(%d) exceeded Bytes to send(%lu) for %s in %s
Explanation Number of Bytes sent to MSDP Peer exceeded Bytes to send. Parameters are: bytes sent, bytes to send, Peer IP address, function name
Recommended Action No special action is required.
Error Message MSDP-2-SEND_QUEUE_CORRUPT: Send queue corrupted for peer %s
Explanation The TCP socket send queue is corrupted. Connection to peer will be reset. Parameters are: Peer IP address
Recommended Action No special action is required.
Error Message MSDP-3-ACCEPT: In %s, %s failed with errmsg: %s
Explanation MSDP process failed to accept connection. Parameters are: Function name, TSP API, Error message
Recommended Action No special action is required.
Error Message MSDP-3-ALREADY_RUNNING: MSDP already running, exiting - %s
Explanation Another MSDP process is already running, this process will shutdown. Parameters are: Error message
Recommended Action No special action is required.
Error Message MSDP-3-API_FAILED: %s failed in %s
Explanation MSDP process failed in invoking an API. Parameters are: API name, Function in which API failed
Recommended Action No special action is required.
Error Message MSDP-3-AS_NUMBER: MSDP/BGP local AS number is - %s
Explanation MSDP process local AS number. Parameters are: AS number
Recommended Action No special action is required.
Error Message MSDP-3-CV_INIT: Couldn't init cond var %s
Explanation MSDP process failed to initialize conditional-variable resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message MSDP-3-FM_ERROR: FM could not shut down MSDP process
Explanation MSDP could not process the disable-req from FM.
Recommended Action Dump core, then restart component.
Error Message MSDP-3-GETSOCKNAME: In %s, %s failed with errmsg: %s
Explanation TSP api tsp_getsockname returned error. Parameters are: Function name, TSP API, Error message
Recommended Action No special action is required.
Error Message MSDP-3-INVALID_TLV: Invalid TLV, type: %d, length: %d from peer %s
Explanation MSDP process received an invalid packet. Appropriate error packet returned. Parameters are: TLV type, TLV length, Peer IP address
Recommended Action No special action is required.
Error Message MSDP-3-LIB_MTS_FAILED: %s failed in %s, errno: %s
Explanation Process failed to access the MSDP mts-queue. Parameters are: MTS function name, Function in which MTS function failed, Error message
Recommended Action No special action is required.
Error Message MSDP-3-MALLOC_FAILED: %s failed in %s
Explanation MSDP process is out of free memory. Parameters are: Malloc function, Function in which Malloc failed
Recommended Action Configure the network or router to decrease the number of routes.
Error Message MSDP-3-MQ_FAILED: %s failed in %s, errno: %s
Explanation MSDP process failed to access the message-queue. Parameters are: MQ function name, Function in which MQ function failed, Error message
Recommended Action No special action is required.
Error Message MSDP-3-MRIB_ROUTE: In %s, %s failed to add mrib route
Explanation MSDP process failed to add mrib routes. Parameters are: Function name, mrib_add_route
Recommended Action No special action is required.
Error Message MSDP-3-MSDP_INIT: MSDP init failed: %s
Explanation MSDP process initialization failed. Parameters are: Component Name
Recommended Action Dump core, then restart component.
Error Message MSDP-3-MTS_BIND: In %s, %s failed due to %s
Explanation MSDP called a MTS API which returned an error. Parameters are: Function name,MTS API,Error message
Recommended Action Dump core, then restart component.
Error Message MSDP-3-MTS_DROP: Error returned from mts_drop(), errmsg: %s
Explanation MSDP called a MTS API which returned an error. Parameters are: Error message
Recommended Action Dump core, then restart component.
Error Message MSDP-3-MTS_FAILED: %s failed in %s, errno: %s
Explanation MSDP process failed to access the mts-queue. Parameters are: MTS function name, Function in which MTS function failed, Error message
Recommended Action No special action is required.
Error Message MSDP-3-MTS_RECV: Error returned from mts_recv(), errmsg: %s
Explanation MSDP called a MTS API which returned an error. Parameters are: Error message
Recommended Action Dump core, then restart component.
Error Message MSDP-3-MTS_REGISTER: mts_register failed for MSDP: %s
Explanation MSDP was unable to register an MTS notification.
Recommended Action No special action is required.
Error Message MSDP-3-MUTEX_INIT: Couldn't init mutex %s
Explanation MSDP process failed to initialize mutex system resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message MSDP-3-NO_SET_PRIORITY: Failed to set policy or priority in %s
Explanation MSDP process could not set itself process priority, exiting. Parameters are: Function name
Recommended Action No special action is required.
Error Message MSDP-3-NO_SHUTDOWN: Unable to shutdown msdp_main_thread - %s
Explanation MSDP process unable to shut itself down. Parameters are: Message
Recommended Action Dump core, then restart component.
Error Message MSDP-3-NOSOURCE: Resetting peer due to VRF change for connect-source %s
Explanation The configured interface used for the connect-sourcehas moved to another VRF.
Recommended Action No special action is required.
Error Message MSDP-3-PTHREAD_FAILED: %s failed in %s for thread %s
Explanation MSDP process failed to create a task thread. Parameters are: PTHREAD function name, Function in which PTHREAD function failed, Error message
Recommended Action Dump core, then restart component.
Error Message MSDP-3-RESTART_REASON: MSDP process has restarted, restart reason: %s\n
Explanation MSDP is restoring the routes it had added in previous instance. Parameters are: Restart reason
Recommended Action No special action is required.
Error Message MSDP-3-SDB_CLIENT_ERROR: Failed to initialize shared database client with status %x and errmsg: %s\n
Explanation MSDP process could not initialize shared database, client. Parameters are: Status,Error Message
Recommended Action No special action is required.
Error Message MSDP-3-SELECT: In %s, %s failed with errmsg: %s
Explanation MSDP process failed to select. Parameters are: Function name, TSP API, Error message
Recommended Action No special action is required.
Error Message MSDP-3-SET_SOCKET_OPTIONS: In %s, %s failed for %s
Explanation MSDP process failed while setting socket options. Parameters are: Function name, API, Socket option
Recommended Action No special action is required.
Error Message MSDP-3-SETRLIMIT_FAILED: Data segment allocation of %ld failed
Explanation MSDP process could not set itself memory resource limit, exiting. Parameters are: Size
Recommended Action No special action is required.
Error Message MSDP-3-SETSOCKOPT: In %s, %s failed while setting %s option with errmsg: %s
Explanation MSDP process failed while setting tsp socket options. Parameters are: Function name, TSP API, Socket option, Error message
Recommended Action No special action is required.
Error Message MSDP-3-SETUPSOCKET_ERROR: In %s, %s failed to create connection with %s
Explanation MSDP process failed to select. Parameters are: Function name, TSP API, IP address
Recommended Action No special action is required.
Error Message MSDP-3-SM_FAILED: %s failed in %s, errno: %s
Explanation MSDP process failed to access the System shared memory resource. Parameters are: SM function name, Function in which SM function failed, Error message
Recommended Action No special action is required.
Error Message MSDP-3-SOCKET_BIND: In %s, %s failed with errmsg %s for %s
Explanation MSDP process failed to bind. Parameters are: Function name, TSP API, Error message, IP address
Recommended Action No special action is required.
Error Message MSDP-3-SOCKET_CONNECT: In %s, %s failed to connect %s with context name:%s and errmsg: %s
Explanation MSDP process failed to connect to peer. Parameters are: Function name, TSP API, Peer IP address, Context name, Error message
Recommended Action No special action is required.
Error Message MSDP-3-SOCKET_ERROR: In %s, %s failed with errmsg: %s
Explanation MSDP process failed to create socket. Parameters are: Function name, TSP API, Error message
Recommended Action No special action is required.
Error Message MSDP-3-SYSMGR_DISPATCH: Error returned from sysmgr_dispatch(), errmsg: %s
Explanation MSDP called a System Manager API which returned an error. Parameters are: Error message
Recommended Action Dump core, then restart component.
Error Message MSDP-3-SYSMGR_INIT: Error in %s while %s
Explanation MSDP called a active timer API which returned an error. Parameters are: Function name,Cause
Recommended Action Dump core, then restart component.
Error Message MSDP-3-TXLIST_CREATE: Couldn't create txlist for %s in VRF:%s
Explanation MSDP failed to create txlist resource. Parameters are: Data type, The VRF that failure occured in
Recommended Action Dump core, then restart component.
Error Message MSDP-3-UNKNOWN_MTYPE: Unknown mtype: %d/%d in %s
Explanation MSDP process received unknown Interprocess message, dropped. Parameters are: Major type, Minor type, Function name
Recommended Action No special action is required.
Error Message MSDP-5-PEER_UPDOWN: Session to peer %s going %s
Explanation MSDP peer is going UP/DOWN. Parameters are: Peer IP Address, up/down
Recommended Action No special action is required.
Error Message MSDP-6-RESTART_SHUTDOWN: MSDP shutting self down via restart command
Explanation MSDP process is shutting itself down due to the restartcommand.
Recommended Action No special action is required.
Error Message MSDP-6-SHUTDOWN: Shutting down MSDP - %s
Explanation MSDP process is shutting itself down. Parameters are: Reason for shutdown
Recommended Action No special action is required.
Error Message MSDP-6-UNKNOWN_OPC: Received unknown mts opcode %d in %s
Explanation MSDP process received unknown Interprocess message, dropped. Parameters are: MTS opcode, Function name
Recommended Action No special action is required.
Error Message MSDP-7-OBJSTORE: Objstore API %s() failed with error: %d\n
Explanation Objstore API has failed.
Recommended Action Keep running, do nothing special.
This section contains the NGMVPN messages.
Error Message NGMVPN-2-STARTUP_DEBUG: %s
Explanation NGMVPN Startup debug. Parameters are: string
Recommended Action Dump core, then restart component.
Error Message NGMVPN-2-STARTUP_FAILURE: Startup failure: %s
Explanation An unrecoverable software error has occurred during NGMVPN startup.
Recommended Action Reload the stack.
Error Message NGMVPN-3-API_FAILED_GET_CONTEXT: In func: %s, failed to retrieve ncib
Explanation No ncib found. Parameters are: func name
Recommended Action No special action is required.
Error Message NGMVPN-3-API_FAILED: %s failed in %s
Explanation NGMVPN process failed in invoking an API. Parameters are: API, Function
Recommended Action No special action is required.
Error Message NGMVPN-3-API_INIT: Couldn't initialize %s API
Explanation NGMVPN failed to open API to interact with the component. Parameters are: Component Name
Recommended Action No special action is required.
Error Message NGMVPN-3-AVL_ERROR: AVL-tree operation %s failed for %s
Explanation MCASTFWD process failed in an AVL-tree manipulation. Parameters are: AVL tree operation, Tree name
Recommended Action No special action is required.
Error Message NGMVPN-3-BD_TO_IF_INDEX_ERR: Could not get if_index for sw_bd. error: %s errorno 0x%x
Explanation Trying to get if_index for sw_bd. Parameters are: syserr to string, error number
Recommended Action No special action is required.
Error Message NGMVPN-3-BF_CREATE: Bitfield creation failed for %s
Explanation NGMVPN called a MTS API which returned an error. Parameters are: bitfield name
Recommended Action Dump core, then restart component.
Error Message NGMVPN-3-COMP_REG: Unable to register with %s
Explanation PIM failed to register with a server component. Parameters are: Component Name
Recommended Action Dump core, then restart component.
Error Message NGMVPN-3-CONCURRENT_DOWNLOAD_REQ: client %s sent a download req when the previous one hasn't finished for vrf: %s
Explanation NGMVPN process received a download req when the previous one hasn't finished. Parameters are: client type
Recommended Action No special action is required.
Error Message NGMVPN-3-CV_INIT: Couldn't init cond var %s
Explanation NGMVPN process failed to initialize conditional-variable resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message NGMVPN-3-DELETE_ERR: Error while deleting: %s
Explanation Could not delete an entry. Parameters are: error type
Recommended Action No special action is required.
Error Message NGMVPN-3-FABRIC_MROUTE_NOT_FOUND: In func: %s, Could not add simulated join
Explanation Could not add simulated join. Parameters are: function name
Recommended Action No special action is required.
Error Message NGMVPN-3-FM_ERROR: FM could not shut down NGMVPN process
Explanation NGMVPN could not process the disable-req from FM.
Recommended Action Dump core, then restart component.
Error Message NGMVPN-3-IF_INDEX_TO_VPRIME_IOD_ERR: Could not get iod for ifindex for vprime. error: %s errorno 0x%x
Explanation Trying to get vprime_iod for if_index. Parameters are: syserr to string, error number
Recommended Action No special action is required.
Error Message NGMVPN-3-INCORRECT_GRANGE_FOR_MRIB: In func: %s, %u incorrectly marked pending for MRIB
Explanation RP Grange and SSM group range need not be sent to MRIB. Parameters are: func name, nlri type
Recommended Action No special action is required.
Error Message NGMVPN-3-INVALID_MSG: In func: %s received invalid msg: %u
Explanation BGP tried to send invalid msg. Parameters are: func name, nlri type
Recommended Action No special action is required.
Error Message NGMVPN-3-INVALID_RP_MSG: RP Grange messages accepted only on Border leaf nodes
Explanation An RP grange message is expected only on Border leaf nodes.
Recommended Action No special action is required.
Error Message NGMVPN-3-INVALID_SSM_MSG: SSM range messages accepted only on Border leaf nodes
Explanation An SSM range message is expected only on Border leaf nodes.
Recommended Action No special action is required.
Error Message NGMVPN-3-INVALID_VRF_ID: Invalid VRF-id: %d, message ignored
Explanation Invalid VRF-id. Parameters are: context_id
Recommended Action No special action is required.
Error Message NGMVPN-3-LIB_EXCESS_NLRIS: BGP tried to send %u nlris
Explanation BGP tried to send too many nlris. Parameters are: nlri count
Recommended Action No special action is required.
Error Message NGMVPN-3-LIB_MTS_SEND: In func: %s could not send nlri: %s error: %s
Explanation BGP could not send nlri to NGMVPN. Parameters are: func name, nlri type, error type
Recommended Action No special action is required.
Error Message NGMVPN-3-LIB_REQ_LOCAL: BGP requested an invalid number of address families: %u
Explanation BGP requested an invalid number of address families. Parameters are: af count
Recommended Action No special action is required.
Error Message NGMVPN-3-MALLOC_FAILED: %s failed in %s
Explanation NGMVPN process failed to allocate memory. Parameters are: API, Function
Recommended Action No special action is required.
Error Message NGMVPN-3-MALLOC: Private mem malloc (%lu) failed in %s
Explanation NGMVPN process is out of free private memory. Parameters are: Type of malloc(size), Function Name
Recommended Action No special action is required.
Error Message NGMVPN-3-MIGRATION_FAILED: Vinci Migration failed due to error: %s, errorno: 0x%x
Explanation Vinci Migration failed. Parameters are: syserr to string, error number
Recommended Action No special action is required.
Error Message NGMVPN-3-MTS_BIND: Error returned from mts_bind() for %s mts queue, errno: %s
Explanation NGMVPN called a MTS API which returned an error. Parameters are: errno, Queue Name
Recommended Action Dump core, then restart component.
Error Message NGMVPN-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation NGMVPN called a MTS API which returned an error. Parameters are: errno
Recommended Action Dump core, then restart component.
Error Message NGMVPN-3-MTS_OPTIONS_SET: Error returned from mts_options_set() for %s queue, errno: %s
Explanation NGMVPN called a MTS API which returned an error. Parameters are: Queue Name, errno
Recommended Action Dump core, then restart component.
Error Message NGMVPN-3-MTS_RECV: Error returned from mts_recv(), errno: %s
Explanation NGMVPN called a MTS API which returned an error. Parameters are: errno
Recommended Action Dump core, then restart component.
Error Message NGMVPN-3-MTS_SEND: In func: %s could not send notif to client %s error: %s
Explanation NGMVPN could not send notification to client. Parameters are: func name, client, error type
Recommended Action No special action is required.
Error Message NGMVPN-3-MTS_UNBIND: Error returned from mts_unbind() for %s mts queue, errno: %s
Explanation NGMVPN called a MTS API which returned an error. Parameters are: errno, Queue Name
Recommended Action Dump core, then restart component.
Error Message NGMVPN-3-MUTEX_INIT: Couldn't init mutex %s
Explanation NGMVPN process failed to initialize mutex system resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message NGMVPN-3-NO_IP_NH_MAPPING: Could not find mapping for %s NH address
Explanation IP NH address mapping could not be found. Parameters are: address family
Recommended Action No special action is required.
Error Message NGMVPN-3-NOPMEM: Ran out of private memory for %s
Explanation Ran out of private memory. Parameters are: node type
Recommended Action No special action is required.
Error Message NGMVPN-3-OPCODE_REG: Could not register opcode 0x%x, reason %s
Explanation Unable to register opcodes. Parameters are: MTS Opcode, Error string
Recommended Action Dump core, then restart component.
Error Message NGMVPN-3-PRUNING_DISABLED: Ignoring Fabric Mroute message from BGP, Pruning Disabled
Explanation A Fabric mroute message was received which is unexpected when Pruning is disabled.
Recommended Action No special action is required.
Error Message NGMVPN-3-PTADD_ERROR: Could not add to PT: vnid=%u src=%s dst=%s err=%u
Explanation Could not add to PT. Parameters are: vnid, src, dst, error
Recommended Action No special action is required.
Error Message NGMVPN-3-PTDEL_ERROR: Could not delete from PT: vrf=%s %s err=%u
Explanation Could not delete from PT. Parameters are: vrf, node type, error
Recommended Action No special action is required.
Error Message NGMVPN-3-PTHREAD_FAILED: pthread_create() failed for %s
Explanation NGMVPN process failed to create a task thread.
Recommended Action Dump core, then reload the stack.
Error Message NGMVPN-3-RESTART_REASON: process has restarted, restart reason: %s\n
Explanation NGMVPN process is shutting itself down. Parameters are: Restart reason
Recommended Action No special action is required.
Error Message NGMVPN-3-SLAB_ALLOC_ERR: Could not allocate slab for %s
Explanation Could not allocate slab. Parameters are: slab type
Recommended Action No special action is required.
Error Message NGMVPN-3-SLAB_CREATE: Slab alloc of type %s failed
Explanation NGMVPN process failed to allocate Slab memory. Parameters are: Structure Type
Recommended Action Configure the network or router to decrease the number of routes.
Error Message NGMVPN-3-SUBCR_INIT: Could not initialize shared database client for interfaces rc=0x%x [%s]
Explanation Unable to do subscriber init to access IM shared-dbs. Parameters are: Status Error, Syserror string
Recommended Action Dump core, then restart component.
Error Message NGMVPN-3-TXLIST_CREATE: Couldn't create txlist for %s in VRF:%s
Explanation NGMVPN failed to create txlist resource. Parameters are: Data type, The VRF that failure occured in
Recommended Action ACTION_SW_KEEP_RUNNING.
Error Message NGMVPN-3-TXLISTADD_ERR_VNI: Could not add %s VNI %d %s to txlist
Explanation Could not add to txlist. Parameters are: node type, vrf, desc
Recommended Action No special action is required.
Error Message NGMVPN-3-TXLISTADD_ERR: Could not add %s vrf %s %s to txlist
Explanation Could not add to txlist. Parameters are: node type, vrf, desc
Recommended Action No special action is required.
Error Message NGMVPN-3-TXLISTINIT_ERR: Could not init %s to txlist
Explanation Could not add to txlist. Parameters are: node type
Recommended Action No special action is required.
Error Message NGMVPN-3-UNKNOWN_BGP_MSG: Unknown message: %u received from BGP
Explanation A message of unknown type was received from BGP. Parameters are: message_type
Recommended Action No special action is required.
Error Message NGMVPN-3-UNKNOWN_MINOR: Minor type 0x%x unknown in %s
Explanation NGMVPN process received unknown Interprocess message, dropped. Parameters are: Minor type
Recommended Action No special action is required.
Error Message NGMVPN-3-UNKNOWN_MJR: Major type 0x%x unknown
Explanation NGMVPN process received unknown Interprocess message, dropped. Parameters are: Major type
Recommended Action No special action is required.
Error Message NGMVPN-3-UNKNOWN_VNID: Received a %s message with unknown vnid : %u from BGP
Explanation A fabric mroute from an unknown vnid was received from BGP. Parameters are: message_type, vnid
Recommended Action No special action is required.
Error Message NGMVPN-3-VNI_EMPTY: VNI change message from L3VM was empty
Explanation Received an empty VNI change message from L3VM.
Recommended Action No special action is required.
Error Message NGMVPN-3-VNI_TO_BD_ERR: vni_to_sw_bd returned error: %s errorno 0x%x
Explanation Trying to get sw bd from vni. Parameters are: syserr to string, error number
Recommended Action No special action is required.
Error Message NGMVPN-3-VNID_CONFIGURED: Must unconfigure vnid %u before setting it
Explanation vnid must first be unconfigured before setting a new vnid. Parameters are: vnid
Recommended Action No special action is required.
Error Message NGMVPN-6-API_FAILED_GET_CREATE_CONTEXT: In func: %s, no cib found for context_id: %lu
Explanation No cib found for context id. Parameters are: func name, context id
Recommended Action No special action is required.
Error Message NGMVPN-6-SHUTDOWN: Shutting down NGMVPN - %s
Explanation NGMVPN process is shutting itself down. Parameters are: Reason for shutdown
Recommended Action No special action is required.
Error Message NGMVPN-6-UNKNOWN_MSG: ngmvpn_mts_main(): unknown major mtype: %d
Explanation NGMVPN process received unknown Interprocess message, dropped. Parameters are: Major Type
Recommended Action No special action is required.
Error Message NGMVPN-6-UNKNOWN_NLRI: In func: %s unknown NLRI: %d
Explanation unknown nlri. Parameters are: func name, nlri type
Recommended Action No special action is required.
This section contains the OSPF messages.
Error Message OSPF-1-INIT: Unable to %s %s
Explanation An internal software error occured. Parameters are: Action, Error
Recommended Action Restart component.
Error Message OSPF-1-LOWMEM: Low memory condition: %s
Explanation The router did not have enough memory to store certain data structures. Parameters are: Error
Recommended Action Out of memory. Add more memory to the router.
Error Message OSPF-1-MCASTJOIN: Unable to join %s group on interface %s
Explanation An internal software error occured. Parameters are: Multicast Group, Interface Id
Recommended Action Restart component.
Error Message OSPF-1-MCASTLEAVE: Unable to leave %s group on interface %s
Explanation An internal software error occured. Parameters are: Multicast Group, Interface Id
Recommended Action Restart component.
Error Message OSPF-1-MQSEND: Unable to send message %s to %s
Explanation An internal software error occured. Parameters are: Message, Destination
Recommended Action Restart component.
Error Message OSPF-1-NOMEM: Malloc (%d bytes) failed for: %s
Explanation The router did not have enough memory to store mentioned data structures. Parameters are: Size, Error
Recommended Action Out of memory. Add more memory to the router.
Error Message OSPF-1-SLABS: Could not create %s slabs
Explanation The router did not have enough memory to reserve space in advance for certain slab data structures. Parameters are: Slab Type
Recommended Action Out of memory. Add more memory to the router.
Error Message OSPF-1-STARTTHREAD: Unable to start thread %s (%d), error %s
Explanation An internal software error occured. Parameters are: Thread name, Thread Id, Error
Recommended Action Restart component.
Error Message OSPF-1-TAG: Unable to retrieve service tag on %s supervisor
Explanation An internal software error occured. Parameters are: Active or Standby Supervisor
Recommended Action Restart component.
Error Message OSPF-1-TIMER: Unable to create %s timer on interface %s
Explanation An internal software error occured. Parameters are: Timer, Interface Id
Recommended Action Restart component.
Error Message OSPF-2-REDIST_VPN: Received VPN routes without extended community for %s/%d
Explanation An internal error. Parameters are: None
Recommended Action No special action is required.
Error Message OSPF-3-BFD_SEND_AUTO_EXPIRY: BFD send auto expiry %s
Explanation OSPF could not send BFD auto expiry. Parameters are: Status
Recommended Action No special action is required.
Error Message OSPF-3-CLEAR_OVERLOAD: Clearing overload state for %s
Explanation OSPF resets the configuration to sends the LSAs with normal cost. Parameters are: LSA which have cost as max-metric are rest to normal cost
Recommended Action No special action is required.
Error Message OSPF-3-CLI_ALL_CMDS: Timed out waiting for CLI configuration (%s)
Explanation OSPF timed out waiting for CLI Server to send all OSPF configs. Parameters are: Error
Recommended Action No special action is required.
Error Message OSPF-3-CLI_NON_IF_CMDS: Timed out waiting for router mode CLI configuration (%s)
Explanation OSPF timed out waiting for CLI Server to send router mode OSPF configs. Parameters are: Error
Recommended Action No special action is required.
Error Message OSPF-3-CMI_ERR: CMI error: %s.
Explanation CMI returned an error. Parameters are: Error
Recommended Action Keep running, do nothing special.
Error Message OSPF-3-CMI_NO_VRF_ERR: CMI error: No %s VRF information found
Explanation CMI returned an error. Parameters are: Error
Recommended Action Keep running, do nothing special.
Error Message OSPF-3-CTX_IF: Error in subrouter context for interface %s: %s
Explanation Error related to interface context. Parameters are: Interface Id, Error
Recommended Action No special action is required.
Error Message OSPF-3-CTX: Error in subrouter context %s: %s
Explanation Error related to multiple subrouters and contexts. Parameters are: Context, Error
Recommended Action No special action is required.
Error Message OSPF-3-HA_AREA: Unable to recreate area %d
Explanation OSPF could not do stateful restart. Parameters are: Area Id
Recommended Action No special action is required.
Error Message OSPF-3-HA_INTF_AREA: Unable to add interface %s to area %s
Explanation OSPF could not do stateful restart. Parameters are: Interface Id, Area Id
Recommended Action No special action is required.
Error Message OSPF-3-HA_INTF: Unable to recreate interface %s
Explanation OSPF could not do stateful restart. Parameters are: Interface Id
Recommended Action No special action is required.
Error Message OSPF-3-HA_LSDB_AREA: Unable to find LSA area %s
Explanation OSPF could not do stateful restart. Parameters are: Area Id
Recommended Action No special action is required.
Error Message OSPF-3-HA_LSDB_INSTALL: Unable to install LSA %s, area %s %s
Explanation OSPF could not do stateful restart. Parameters are: LSA, Area Id, Interface Id
Recommended Action No special action is required.
Error Message OSPF-3-HA_LSDB_LINK: Unable to find link LSA interface/area
Explanation OSPF could not do stateful restart.
Recommended Action No special action is required.
Error Message OSPF-3-HA_LSID: Unable to reserve LSID %d for %s LSA %s
Explanation OSPF could not do stateful restart. Parameters are: LSA type, Interface name
Recommended Action No special action is required.
Error Message OSPF-3-HA_NBR_INTF: Unable to find interface index %d for neighbor %s
Explanation OSPF could not do stateful restart. Parameters are: Interface Index, Neighbor Id
Recommended Action No special action is required.
Error Message OSPF-3-HA_NBR: Unable to recreate neighbor %s
Explanation OSPF could not do stateful restart. Parameters are: Neighbor Id
Recommended Action No special action is required.
Error Message OSPF-3-HA_NO_SR: Unable to find sr %d
Explanation OSPF could not do stateful restart. Parameters are: Subrouter Id
Recommended Action No special action is required.
Error Message OSPF-3-HA_SR: Unable to recreate sr %d
Explanation OSPF could not do stateful restart. Parameters are: Subrouter Id
Recommended Action No special action is required.
Error Message OSPF-3-HEAPSIZE: Error increasing heap size to %d, error %d
Explanation Reduced heap size will limit the LSDB size. Parameters are: Size, Error
Recommended Action Keep running, do nothing special.
Error Message OSPF-3-IF_INVALID: Unable to find interface %s
Explanation OSPF could not find an interface. Parameters are: Interface name
Recommended Action No special action is required.
Error Message OSPF-3-INVALID_TLV: Found corrupted TLV, LSA %s
Explanation Error while parsing TLV. Parameters are: LSA
Recommended Action Keep running, do nothing special.
Error Message OSPF-3-INVALIDKCCRYPTOALGO: Cryptographic algorithm in key ID %u of key chain %s is not supported by OSPF
Explanation The cryptographic algorithm configured in the key chain is not supported by OSPF. This may happen because the key chain allows cryptographic algorithms which is not acceptable by OSPF. Parameters are: action
Recommended Action Configure a cyrptographic algorithm that is supported by OSPF.
Error Message OSPF-3-INVALIDKCKEYID: Key ID %u in key chain %s is invalid
Explanation The Key ID configured in the key chain is out of range for OSPF. This may happen because the key chain allows Key ID values outside of the range which is acceptable for OSPF. Parameters are: action
Recommended Action Configure a new security association with a Key ID that is in the range 1-255.
Error Message OSPF-3-INVALIDKCMD5KEYSTRING: Key string in key ID %u of key chain %s is longer than that is supported by MD5 authentication
Explanation The key string configured in the key chain is longer than that is supported by MD5 authentication. This may happen because the key chain allows key strings longer than that is supported by MD5 authentication. Parameters are: action
Recommended Action Configure a key string whose length is atmost 16.
Error Message OSPF-3-INVALIDKCSIMPLEKEYSTRING: Key string in key chain %s is longer than that is supported by Simple authentication
Explanation The key string configured in the key chain is longer than that is supported by Simple authentication. This may happen because the key chain allows key strings longer than that is supported by Simple authentication. Parameters are: action
Recommended Action Configure a key string whose length is atmost 8.
Error Message OSPF-3-ISSD_FAILED_GREATER_THAN_4: Sending ISSD disable signal because of configuration of OSPF instance number %d and OSPF process tag %s
Explanation ISSD to pre Edinbirgh-2 image disabled if instances 5 above are configured. Parameters are: Contexts
Recommended Action No special action is required.
Error Message OSPF-3-ISSU_GR_DISABLED: Aborting ISSU, GR is disabled in %d out of %d contexts
Explanation ISSU requires OSPF GR to be enabled for all contexts. Parameters are: Contexts, Contexts
Recommended Action No special action is required.
Error Message OSPF-3-ISSU_GR_FAILED: Aborting ISSU, GR failed in %d out of %d contexts
Explanation ISSU requires successful OSPF GR in all contexts. Parameters are: Contexts, Contexts
Recommended Action No special action is required.
Error Message OSPF-3-ISSU_GR_IN_HELPER_MODE: Aborting ISSU, OSPF in GR helper mode in %d contexts
Explanation ISSU requires stable OSPF topology in all contexts. Parameters are: Contexts
Recommended Action No special action is required.
Error Message OSPF-3-ISSU_GR_IN_PROGRESS: Aborting ISSU, GR in progress in %d out of %d contexts
Explanation ISSU requires stable OSPF topology in all contexts. Parameters are: Contexts, Contexts
Recommended Action No special action is required.
Error Message OSPF-3-MAXIFS: Exceeded the limit on interfaces per area [i.e %d]
Explanation Restricting the number of interfaces per area to avoid problems during lsa generation. Parameters are: Interface Limit
Recommended Action Reduce the number of interfaces per area.
Error Message OSPF-3-MAXLSAS: Maximum number of LSAs in domain has been reached
Explanation The OSPF domain contains more LSAs than this router can store.
Recommended Action Redesign the network to redistribute less external routes into the OSPF domain.
Error Message OSPF-3-MIB_FAIL: Failed to %s the MIB with status as %s
Explanation Error while loading or unloading the MIB. Parameters are: action
Recommended Action Keep running, do nothing special.
Error Message OSPF-3-MTS_BIND: Error returned from mts_bind(), errno: %s
Explanation OSPF called a MTS API which returned an error. Parameters are: Error
Recommended Action No special action is required.
Error Message OSPF-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation OSPF called a MTS API which returned an error. Parameters are: Error
Recommended Action No special action is required.
Error Message OSPF-3-MTS_NOTIFY: Error returned from mts_send_notify(), errno: %s
Explanation OSPF called a MTS API which returned an error. Parameters are: Error
Recommended Action No special action is required.
Error Message OSPF-3-MTS_RECV: Error returned from tsp_mts_recv(), errno: %s
Explanation OSPF called a MTS API which returned an error. Parameters are: Error
Recommended Action No special action is required.
Error Message OSPF-3-PSS_AREA: PSS %s for area %d failed
Explanation OSPF called an PSS API which returned an error. Parameters are: Action, Area Id
Recommended Action No special action is required.
Error Message OSPF-3-PSS_GLOBAL: PSS %s for global data failed
Explanation OSPF called an PSS API which returned an error. Parameters are: Action
Recommended Action No special action is required.
Error Message OSPF-3-PSS_INTF: PSS %s for interface %s failed
Explanation OSPF called an PSS API which returned an error. Parameters are: Action, Interface Id
Recommended Action No special action is required.
Error Message OSPF-3-PSS_LSDB: PSS %s for LSA %s failed
Explanation OSPF called an PSS API which returned an error. Parameters are: Action, LSA
Recommended Action No special action is required.
Error Message OSPF-3-PSS_MGET: %s for %s information failed
Explanation OSPF called an PSS API which returned an error. Parameters are: Data
Recommended Action No special action is required.
Error Message OSPF-3-PSS_MOVE_TO_LOCATION_OR_KEY: PSS move to %s for %s information failed
Explanation OSPF called an PSS API which returned an error. Parameters are: Data
Recommended Action No special action is required.
Error Message OSPF-3-PSS_NBR: PSS %s for neighbor %s failed
Explanation OSPF called an PSS API which returned an error. Parameters are: Action, Neighbor Id
Recommended Action No special action is required.
Error Message OSPF-3-PSS_READ_KEY_OR_VALUE: PSS read %s for %s information failed
Explanation OSPF called an PSS API which returned an error. Parameters are: Data
Recommended Action No special action is required.
Error Message OSPF-3-PSS_READ: PSS read for %s information failed
Explanation OSPF called an PSS API which returned an error. Parameters are: Data
Recommended Action No special action is required.
Error Message OSPF-3-PSS_SR: PSS %s for sr %d failed
Explanation OSPF called an PSS API which returned an error. Parameters are: Action, Subrouter Id
Recommended Action No special action is required.
Error Message OSPF-3-ROUTEDEL: Route deletion %s/%d failed
Explanation Internal Error. Parameters are: Prefix, Length
Recommended Action Keep running, do nothing special.
Error Message OSPF-3-SET_OVERLOAD: Setting overload state for %s
Explanation OSPF sets the configuration to sends the LSAs with max-metric cost. Parameters are: LSA which have cost as max-metric
Recommended Action No special action is required.
Error Message OSPF-3-SMALLBUF: %s packet doesn't fit in buffer (packet %d/ buffer %d)
Explanation The router has allocated a packet buffer that was too small. Parameters are: Packet Type, Packet Size, Buffer Size
Recommended Action Keep running, do nothing special.
Error Message OSPF-3-SNMP_FAIL: Failed to %s the SNMP with status as %s
Explanation Error while registering or deregistering with SNMP. Parameters are: action
Recommended Action Keep running, do nothing special.
Error Message OSPF-3-SNMP_SAP_FAIL: Failed to %s the SNMP SAP with status as %s
Explanation Error while registering or deregistering with SNMP SAP. Parameters are: action
Recommended Action Keep running, do nothing special.
Error Message OSPF-3-SNMP_TRAP_FAIL: Not sending trap %s for %s because of trap and version incompatibility
Explanation Error while sending trap notifications to SNMP. Parameters are: action
Recommended Action Keep running, do nothing special.
Error Message OSPF-3-TLV_INTF: Failed to convert to %s for %s
Explanation OSPF called an TLV intf which returned an error. Parameters are: Action, Data
Recommended Action No special action is required.
Error Message OSPF-3-UNAWAKABLE: Trying to awake unawakable thread %s
Explanation Thread cannot be wokenup at this time. Parameters are: Thread Name
Recommended Action Keep running, do nothing special.
Error Message OSPF-3-UNKNOWNSIG: Received unknown signal: %d
Explanation An unexpected software interrupts was received. Parameters are: Signal
Recommended Action Keep running, do nothing special.
Error Message OSPF-4-AF_NO_FUNC: Function %s not supported by OSPF version %s
Explanation Function is not specified for the current address family. Parameters are: Function Name, OSPF Version
Recommended Action Keep running, do nothing special.
Error Message OSPF-4-AREA_ERR: Packet from %s on %s received for wrong area %s
Explanation A OSPF packet not belonging to this area was received. Parameters are: Source IP address, Interface name, Area ID
Recommended Action No special action is required.
Error Message OSPF-4-AUTH_ERR: Received packet from %s on %s with bad authentication %hx
Explanation A OSPF packet with mismatched authentication type was received. Parameters are: Source IP address, Interface name, Type
Recommended Action No special action is required.
Error Message OSPF-4-CKSM_ERR: Bad OSPF checksum in packet %hx computed %hx from %s on %s
Explanation A OSPF packet with invalid checksum was received. Parameters are: Checksum value, Checksum value, Source IP address, Interface name
Recommended Action No special action is required.
Error Message OSPF-4-CLEANUP: OSPF is exiting, reason %s(0x%x)
Explanation OSPF has been deconfigured or restarted. Parameters are: Reason string, Reason no
Recommended Action No special action is required.
Error Message OSPF-4-DEST_INVALID: Bad destination address %s
Explanation A OSPFv3 packet with muticast source address was received. Parameters are: Source IP address
Recommended Action No special action is required.
Error Message OSPF-4-DUPRID: Router %s on interface %s is using our routerid, packet dropped
Explanation Two routers are configured with the same router ID. Parameters are: Router Id, Interface Id
Recommended Action Check all routers on the indicated interface for misconfigurations.
Error Message OSPF-4-IF_ERR: Packet from %s received on %s interface %s
Explanation A OSPF packet not belonging to this interface was received. Parameters are: Source IP address, reason, Interface
Recommended Action No special action is required.
Error Message OSPF-4-INVALIDOUT: Trying to send packet with packettype %d to %s on %s
Explanation The router tried to send unknown OSPF packet. Parameters are: Packet Type, Destination, Interface Id
Recommended Action Keep running, do nothing special.
Error Message OSPF-4-NEIGH_ERR: Neighbor %s not found, packet dropped
Explanation A non-hello OSPF packet with no neighbor was received. Parameters are: Source IP address
Recommended Action No special action is required.
Error Message OSPF-4-OSPF_MAX_LSA_STATE: Max-lsa feature entering into %s. %s OSPF adjacencies
Explanation Logging the current max-lsa feature state and the effect on OSPF adjacencies. Parameters are: Max-lsa feature state and effect on OSPF adjacencies
Recommended Action Check if some router in the network is generating large number of LSAs as a result of misconfiguration.
Error Message OSPF-4-OSPF_MAX_LSA_THR: Threshold for maximum number (%d) of non self-generated LSA has been reached
Explanation Threshold for maximum number of non self-generated LSA has been reached. Parameters are: Threshold value of maximum number of non-self-originated LSAs
Recommended Action Check if some router in the network is generating large number of LSAs as a result of misconfiguration.
Error Message OSPF-4-OSPF_MAX_LSA: Maximum number of non self-generated LSAs (%d) has been exceeded
Explanation Maximum number of non self-generated LSA has been exceeded. Parameters are: Configured value of maximum number of non-self-originated LSAs
Recommended Action Check if some router in the network is generating large number of LSAs as a result of misconfiguration.
Error Message OSPF-4-PKTLEN_ERR: Packet received from %s on %s has length %d which is less than %s %d
Explanation A OSPF packet with invalid length was received. Parameters are: Source IP address, Interface name, Packet length, Type, Header length
Recommended Action No special action is required.
Error Message OSPF-4-PKTTYPE_ERR: Unknown type %d received from %s on %s
Explanation A OSPF packet with incorrect packet type was received. Parameters are: Packet type, Source IP address, Interface name
Recommended Action No special action is required.
Error Message OSPF-4-REDIST_MAX_PFX: Redistribution prefix limit has been reached - %d prefixes
Explanation Check if redistribution of large number of prefixes is desired and has not been configured by mistake. Parameters are: Number of prefixes
Recommended Action No special action is required.
Error Message OSPF-4-REDIST_THR_PFX: Redistribution prefix threshold has been reached - %d prefixes
Explanation Check if redistribution of large number of prefixes is desired and has not been configured by mistake. Parameters are: Number of prefixes
Recommended Action No special action is required.
Error Message OSPF-4-RESTART_SHUTDOWN: OSPF shutting self down via restart command
Explanation OSPF process is shutting itself down due to the restartcommand.
Recommended Action No special action is required.
Error Message OSPF-4-SELF_LSA: context %s: %s
Explanation Router received an newer copy of an LSA generated by itself. Two routers may be configured with the same router ID or a router which was disconnected from the network has come back. Parameters are: Context, Message
Recommended Action Verify if the router ID for the router is unique in the network.
Error Message OSPF-4-SOURCE_ERR: Bad source address %s - ours on %s
Explanation A OSPF packet with our own source address was received. Parameters are: IP address, Interface name
Recommended Action No special action is required.
Error Message OSPF-4-SRC_INVALID: Invalid src address %s, should not be seen on %s
Explanation A OSPF packet packet with source address not on this network was received. Parameters are: Source IP address, Interface name
Recommended Action No special action is required.
Error Message OSPF-4-SRC_MCAST: Bad source address %s - multicast on %s
Explanation A OSPFv3 packet with muticast source address was received. Parameters are: Source IP address
Recommended Action No special action is required.
Error Message OSPF-4-VERSION_ERR: Bad ospf version %d received from %s on %s
Explanation A OSPF packet with incorrect version number was received. Parameters are: Version number, Source IP address, Interface name
Recommended Action No special action is required.
Error Message OSPF-4-WRONGQ: Found wrong type of packet (%d) on internal %s queue
Explanation Did not expect the specified packet type on the given incoming message queue. Parameters are: Packet Type, Queue
Recommended Action Keep running, do nothing special.
Error Message OSPF-5-ADJCHANGE: Nbr %s on %s went %s
Explanation An OSPF neighborship has just been established. Or a neighborship has just been shutdown. Parameters are: Neighbor Id, Interface Id, New State
Recommended Action No special action is required.
Error Message OSPF-5-BFD_DOWN: BFD state Down for %s on %s (area %s) BFD code %d
Explanation OSPF received BFD down notification. Parameters are: Neighbor Id, Interface Id, Area Id, BFD code
Recommended Action No special action is required.
Error Message OSPF-5-NBRSTATE: Process %s, Nbr %s on %s from %s to %s, %s
Explanation An OSPF neighbor has just changed state. Parameters are: Process tag, Neighbor Id, Interface Id, Old State, New State, Event
Recommended Action No special action is required.
Error Message OSPF-6-DECONFIG_SHUTDOWN: OSPF shutting self down via deconfiguration
Explanation OSPF process is shutting itself down due to the deconfiguration command.
Recommended Action No special action is required.
Error Message OSPF-6-HA_DB_REBUILD: HA run-time database buildup %s
Explanation OSPF stateful restart status. Parameters are: Action
Recommended Action No special action is required.
Error Message OSPF-6-HA_STATEFUL: Stateful HA %s
Explanation OSPF stateful restart status. Parameters are: Action
Recommended Action No special action is required.
Error Message OSPF-6-INTFID_CHNGD: Router %s on interface %s is sending OSPFv3 packets from more than one interfaces
Explanation OSPFv3 is enabled on more than one interface having same link-local address. Parameters are: Router Id, Interface Id
Recommended Action Check all routers on the indicated interface for misconfigurations.
Error Message OSPF-6-MTS_UNKNOWN_MSG: Received unknown MTS message with opcode %d, dropping it
Explanation OSPF recieved an unknown MTS message. The message will be dropped. Parameters are: MTS Opcode
Recommended Action No special action is required.
Error Message OSPF-6-SHUTDOWN_REQUEST_FAIL: OSPF shutdown request failed, %s
Explanation OSPF request to system mananger for permission to shutdown was turned down. Parameters are: Error
Recommended Action No special action is required.
Error Message OSPF-6-START: Starting OSPF %s, %s
Explanation OSPF process is starting due to the specified reason. Parameters are: Process name, Reason
Recommended Action No special action is required.
Error Message OSPF-6-UNKNOWN_SHUTDOWN: OSPF shutting self down due to unknown reason
Explanation OSPF process is shutting itself down due to unknown reason.
Recommended Action No special action is required.
This section contains the PCL messages.
Error Message PCL-2-MALLOC_FAILED: malloc() failed for allocating %s in %s()
Explanation PCL process is out of heap memory.
Recommended Action Keep running, do nothing special.
Error Message PCL-2-SLAB_ALLOC_FAILED: slab_calloc() failed for allocating %s in %s()
Explanation PCL process is out of heap memory.
Recommended Action Keep running, do nothing special.
Error Message PCL-2-SMALLOC_FAILED: smalloc() failed for allocating %s in %s()
Explanation PCL process is out of shared memory. This could be due to temporary increase in the number of policies configured to a very high value.
Recommended Action Keep running, do nothing special.
Error Message PCL-3-API_FAILED_NUM_NUM: %s - failed for %d %d in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message PCL-3-API_FAILED_NUM: %s - failed for %d in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message PCL-3-API_FAILED_STR_NUM: %s - failed for %s %d in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message PCL-3-API_FAILED_STR_STR: %s - failed for %s %s in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message PCL-3-API_FAILED_STR: %s - failed for %s in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message PCL-3-API_FAILED: %s - failed in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message PCL-3-MQ_FAILED_NAME: %s failed for client %s, errno: %s in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message PCL-3-MQ_FAILED_PID: %s failed to client pid: %d, errno: %s in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message PCL-3-MQ_FAILED: %s failed, errno: %s in %s()
Explanation An unexpected but manageable event has occurred.).
Recommended Action No special action is required.
Error Message PCL-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation PCL called a MTS API which returned an error.
Recommended Action No special action is required.
Error Message PCL-3-MTS_RECV: Error returned from tsp_mts_recv(), errno: %s
Explanation PCL called a MTS API which returned an error.
Recommended Action No special action is required.
Error Message PCL-3-WORK_THREAD_FAILIURE: %s failed for policy %s %s to client %s count %d in %s()
Explanation PCL work thread item failed after repeated attempts. This could be either due to too many policies configured or some of PCL client's message queues are full.
Recommended Action No special action is required.
Error Message PCL-6-MTS_UNKNOWN_MSG: Received unknown MTS message with opcde %d, dropping it
Explanation PCL recieved an unknown message. The message is dropped.
Recommended Action No special action is required.
Error Message PCL-6-PKT_LOG: %s
Explanation Packet header logging by access-rules.
Recommended Action No special action is required.
Error Message PCL-7-DEBUG: %s
Explanation PCL Debug information.
Recommended Action No special action is required.
This section contains the PIM messages.
Error Message PIM-2-SHM_LOCK_CREAT: Failed to create shared memory lock: %s
Explanation INITIALIZATION_FAILURE_EXPLANATION. Parameters are: Error Name
Recommended Action Reload the stack.
Error Message PIM-2-STARTUP_DEBUG: %s in %s
Explanation INITIALIZATION_FAILURE_EXPLANATION. Parameters are: Error, Function Name
Recommended Action No special action is required.
Error Message PIM-3-ADD_ROUTE: Couldn't add PIM route %s in %s
Explanation PIM failed to update the local route-table entry. Parameters are: Addresses, Function Name
Recommended Action No special action is required.
Error Message PIM-3-ADD_RP_FAIL: %s: %s for group %s
Explanation PIM API for getting RP address failed. Parameters are: Function Name, reason, group address
Recommended Action No special action is required.
Error Message PIM-3-API_CLOSE: Couldn't close %s API
Explanation PIM failed to close API opened with the component. Parameters are: Component Name
Recommended Action No special action is required.
Error Message PIM-3-API_FAILED: %s failed in %s
Explanation PIM process failed in invoking an API. Parameters are: Function Name
Recommended Action No special action is required.
Error Message PIM-3-API_INIT: Couldn't initialize %s API
Explanation PIM failed to open API to interact with the component. Parameters are: Component Name
Recommended Action No special action is required.
Error Message PIM-3-ATTACH_SHM: Couldn't attach to shm of %s
Explanation PIM process failed to open a shared memory resource. Parameters are: Shared Memory Segment Name
Recommended Action Dump core, then restart component.
Error Message PIM-3-AVL_ERROR: AVL-tree operation %s failed for %s
Explanation PIM process failed in an AVL-tree manipulation. Parameters are: AVL tree operation, Tree name
Recommended Action No special action is required.
Error Message PIM-3-BF_CONVERT: bitfield_convert() failed
Explanation PIM failed to convert a compressed bitfield.
Recommended Action Dump core, then restart component.
Error Message PIM-3-BF_CREATE: Couldn't create %s bitfield
Explanation PIM failed to create bitfield resource. Parameters are: List Name
Recommended Action Dump core, then restart component.
Error Message PIM-3-BF_FAILED: Bitfield API %s failed for %s bitfield
Explanation PIM failed perfor bitfield function. Parameters are: API name, Function Name
Recommended Action Dump core, then restart component.
Error Message PIM-3-BIND: bind() on %s failed: %s
Explanation PIM failed to bind UDP socket. Auto-RP will not work. Parameters are: FunctionError String
Recommended Action Dump core, then restart component.
Error Message PIM-3-COMP_DEREG: Unable to de-register with %s
Explanation PIM failed to de-register with a server component. Parameters are: Component Name
Recommended Action No special action is required.
Error Message PIM-3-COMP_REG: Unable to register with %s
Explanation PIM failed to register with a server component. Parameters are: Component Name
Recommended Action Dump core, then restart component.
Error Message PIM-3-CONFCHECK: Failed to %s Tunnel multicast concheck Capability. error: %s
Explanation Could not add/delete confcheck capability. Parameters are: Operation, Error
Recommended Action No special action is required.
Error Message PIM-3-CREATE_ROUTE: Couldn't create PIM route for %s in %s
Explanation PIM failed to update the local route-table entry. Parameters are: Addresses, Function Name
Recommended Action No special action is required.
Error Message PIM-3-CV_INIT: Couldn't init cond var %s
Explanation PIM process failed to initialize conditional-variable resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message PIM-3-DEL_IF: Couldn't delete interface %s from PIM route %s in %s
Explanation PIM failed to delete the outgoing interface from route-table entry. Parameters are: Interface, Addresses, Function Name
Recommended Action No special action is required.
Error Message PIM-3-DEL_ROUTE: Couldn't delete PIM route %s in %s
Explanation PIM failed to delete the local route-table entry. Parameters are: Addresses, Function Name
Recommended Action No special action is required.
Error Message PIM-3-FREE_ROUTE: Couldn't free PIM route %s in %s
Explanation PIM failed to delete the route-table entry. Parameters are: Addresses, Function Name
Recommended Action No special action is required.
Error Message PIM-3-GET_RP_FAIL: %s: %s for group %s
Explanation PIM API for getting RP address failed. Parameters are: Function Name, reason, group address
Recommended Action No special action is required.
Error Message PIM-3-HA_FAILURE: %s
Explanation PIM process failed in a HA operation. Parameters are: String describing what failed
Recommended Action No special action is required.
Error Message PIM-3-HA_INVALID_MVPN_MDT: Values of mdt pointer invalid in %s
Explanation Invalid mdt pointer.
Recommended Action No special action is required.
Error Message PIM-3-HA_INVALID_POINTER: %s: %s invalid pointer
Explanation Invalid pointer to invoke HA functions.
Recommended Action No special action is required.
Error Message PIM-3-HA_KEYTYPE_MISMATCHED: Keytype %d mismatched, expected %d
Explanation Key type not matching.
Recommended Action No special action is required.
Error Message PIM-3-HEARTBEAT_TIMER: Unable to create heartbeat timer in %s
Explanation Unable to create heartbeat timer. Parameters are: Function Name
Recommended Action Dump core, then restart component.
Error Message PIM-3-IGMP_DOWN: Couldn't enable PIM on %s, IGMP is not up
Explanation PIM is not enabled on the interface, as it requires IGMP to be up. Parameters are: Interface
Recommended Action No special action is required.
Error Message PIM-3-IM_EXT: Couldn't set IM-extension for interface %s
Explanation PIM process failed to set IM extension. Parameters are: Interface
Recommended Action Dump core, then restart component.
Error Message PIM-3-INIT_MTS_SAP: mts_bind() failed in pim_init_mts(), errno: %s
Explanation Unable to open MTS SAP. Parameters are: Error String
Recommended Action Dump core, then restart component.
Error Message PIM-3-INVALID_GROUP: Operation for invalid group %s received in %s
Explanation PIM process received invalid group. Parameters are: Group, Function
Recommended Action No special action is required.
Error Message PIM-3-INVALID_PARAM: Invalid parameters passed to %s
Explanation Invalid parameters passed to a function. Parameters are: Function name
Recommended Action No special action is required.
Error Message PIM-3-LIB_API_FAILED: %s failed in %s
Explanation PIM client failed in invoking an API. Parameters are: Function Name
Recommended Action No special action is required.
Error Message PIM-3-LIB_INT_ERROR: %s in %s()
Explanation PIM API encountered an error during internal processing. Parameters are: Error, PIM Function
Recommended Action Report the issue to Customer Support.
Error Message PIM-3-LIB_MALLOC: Private mem malloc (%lu) failed in %s
Explanation Process is out of free private memory. Parameters are: Type of malloc(size), Function Name
Recommended Action Configure the network or router to decrease the number of routes.
Error Message PIM-3-LIB_MTS_SEND: mts_send() failed for %s, errno: %s
Explanation Process called a MTS API which returned an error. Parameters are: Error String
Recommended Action Dump core, then restart component.
Error Message PIM-3-MALLOC: Private mem malloc (%lu) failed in %s
Explanation PIM process is out of free private memory. Parameters are: Type of malloc(size), Function Name
Recommended Action Configure the network or router to decrease the number of routes.
Error Message PIM-3-MAX_GRANGES: Max Granges allowed to be configured for use shared tree config is %d
Explanation Exceeded the group range limit.
Recommended Action No special action is required.
Error Message PIM-3-MAX_ROUTES: Exceeded max allowed routes to be sent to MRIB
Explanation Exceeded max allowed routes to be sent to MRIB.
Recommended Action No special action is required.
Error Message PIM-3-MCEC_MSG: %s
Explanation PIM VPC related messages. Parameters are: String
Recommended Action Dump core, then restart component.
Error Message PIM-3-MQCLOSE: Couldn't close %s mq: %s
Explanation PIM failed to close the message-queue resource.
Recommended Action No special action is required.
Error Message PIM-3-MQFLUSH: Couldn't flush %s mq: %s
Explanation PIM failed to remove stale messages from the message-queue.
Recommended Action No special action is required.
Error Message PIM-3-MQLOOP_CREATE: Couldn't create %s mqloop: %s
Explanation PIM failed to create the mqloop resource. Parameters are: MSG Queue Name, Error String
Recommended Action Dump core, then restart component.
Error Message PIM-3-MQLOOP_REGHAND: Couldn't register all handlers for %s mqloop
Explanation PIM failed to initialize handlers the mqloop resource. Parameters are: MSG Queue Name
Recommended Action Dump core, then restart component.
Error Message PIM-3-MQLOOP_SHUTDOWN: Couldn't shutdown %s mqloop
Explanation PIM failed to shutdown the mqloop resource. Parameters are: MSG Queue Name
Recommended Action No special action is required.
Error Message PIM-3-MQLOOP_START: Couldn't start %s mqloop
Explanation PIM failed to initialize the mqloop resource. Parameters are: MSG Queue Name, Error String
Recommended Action Dump core, then restart component.
Error Message PIM-3-MQOPEN: Couldn't open %s mq: %s
Explanation PIM failed to open the message-queue resource. Parameters are: Component, Function Name
Recommended Action Dump core, then restart component.
Error Message PIM-3-MQSEND: mq_send() error on %s queue in %s
Explanation PIM failed to send an IPC message on the message-queue. Parameters are: Component, Function Name
Recommended Action No special action is required.
Error Message PIM-3-MRIB_ADD_ROUTE: MRIB add route failed in %s
Explanation PIM failed to add route in MRIB. Parameters are: Function Name
Recommended Action No special action is required.
Error Message PIM-3-MRIB_DEL_ROUTE: MRIB delete route failed in %s
Explanation PIM failed to delete route in MRIB. Parameters are: Function Name
Recommended Action No special action is required.
Error Message PIM-3-MRIB_NO_SHARED_TREE: MRIB shared tree entry absent for group %s/%d
Explanation MRIB route unexpectedly absent for a group entry. Parameters are: Group addressGroup mask length
Recommended Action No special action is required.
Error Message PIM-3-MSDP_ORIG_DATASA: Couldn't originate MSDP data SA in %s
Explanation PIM failed to notify MSDP to originate data SA message. Parameters are: Function Name
Recommended Action No special action is required.
Error Message PIM-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation PIM called a MTS API which returned an error. Parameters are: Error String
Recommended Action Dump core, then restart component.
Error Message PIM-3-MTS_INIT: Could not initialize MTS for %s
Explanation Unable to register opcodes. Parameters are: Service / Queue description
Recommended Action Dump core, then restart component.
Error Message PIM-3-MTS_RECV: Error returned from mts_recv(), errno: %s
Explanation PIM called a MTS API which returned an error. Parameters are: Error String
Recommended Action Dump core, then restart component.
Error Message PIM-3-MTS_REGISTER: mts_register failed for PIM: %s
Explanation PIM was unable to register an MTS notification.
Recommended Action No special action is required.
Error Message PIM-3-MTS_SEND: mts_send() failed for %s, errno: %s
Explanation PIM called a MTS API which returned an error. Parameters are: Error String
Recommended Action Dump core, then restart component.
Error Message PIM-3-MTS_UNBIND: mts_unbind() failed in %s for queue %s with err: %s
Explanation mts_unbind failure. Parameters are: Function name, Queue name, Error String
Recommended Action Dump core, then restart component.
Error Message PIM-3-MTSOPEN: Couldn't bind %s mts-q: %s
Explanation PIM failed to open the MTS-queue resource. Parameters are: MSG Queue Name, Error String
Recommended Action Dump core, then restart component.
Error Message PIM-3-MUTEX_INIT: Couldn't init mutex %s
Explanation PIM process failed to initialize mutex system resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message PIM-3-MV_INIT: Couldn't init mutex %s
Explanation PIM process failed to initialize mutex system resource. Parameters are: Data type
Recommended Action Dump core, then restart component.
Error Message PIM-3-NO_SET_PRIORITY: Failed to set policy or priority
Explanation PIM process could not set itself process priority, exiting.
Recommended Action No special action is required.
Error Message PIM-3-OIM_REGISTER_FAIL: Unable to register with OIM module in %s
Explanation MVPN module couldnt register with OIM module. Parameters are: API name, Function name
Recommended Action Dump core, then restart component.
Error Message PIM-3-OPCODE_REG: Could not register opcode 0x%x, reason %s
Explanation Unable to register opcodes. Parameters are: MTS Opcode, Error string
Recommended Action Dump core, then restart component.
Error Message PIM-3-PIM_API_NOT_INIT: PIM API not initialized
Explanation PIM API is not initialized.
Recommended Action No special action is required.
Error Message PIM-3-PIM_BFD_ADD_FAIL: %s request for interface %s failed in %s
Explanation BFD session add failed. Parameters are: API name, Interface name, Function name
Recommended Action Dump core, then restart component.
Error Message PIM-3-PIM_BFD_API_FAIL: %s request failed in %s
Explanation BFD API failed. Parameters are: API name, Function name
Recommended Action Dump core, then restart component.
Error Message PIM-3-PIM_BFD_REMOVE_FAIL: Session remove request for neighbor %s on interface %s failed (%s)
Explanation BFD session add failed. Parameters are: Neighbor IP, Interface name, Error
Recommended Action Dump core, then restart component.
Error Message PIM-3-PIM_BFD_SEND_AUTO_EXPIRY: Unable to start BFD staling, error %s
Explanation PIM BFD staling API failed. Parameters are: Error string
Recommended Action Dump core, then restart component.
Error Message PIM-3-PIM_BFD_SES_REMOVE_ALL: Unable to cleanup the BFD sessions during deconfiguration, error %s
Explanation Unable to cleanup BFD sessions. Parameters are: Error string
Recommended Action Report the issue to Customer Support.
Error Message PIM-3-PIM_CIB: Couldn't find PIM VRF for %s
Explanation PIM failed to obtain its VRF info block. Parameters are: Interface
Recommended Action Dump core, then restart component.
Error Message PIM-3-PIM_EXISTS: PIM is already running, process exiting
Explanation Another PIM process is already running, this process will shutdown.
Recommended Action No special action is required.
Error Message PIM-3-PIM_INIT: PIM init failed: %s
Explanation PIM process initialization failed. Parameters are: Component Name
Recommended Action Dump core, then restart component.
Error Message PIM-3-PIM_LIB_API_FAILED: %s failed in %s
Explanation PIM client failed in invoking an API. Parameters are: Function Name
Recommended Action No special action is required.
Error Message PIM-3-PIM_LIB_API_INIT: Couldn't initialize %s API
Explanation PIM failed to open API to interact with the component. Parameters are: Component Name
Recommended Action No special action is required.
Error Message PIM-3-PIM_LIB_MALLOC: Private mem malloc (%lu) failed in %s
Explanation Process is out of free private memory. Parameters are: Type of malloc(size), Function Name
Recommended Action Configure the network or router to decrease the number of routes.
Error Message PIM-3-PIM_LIB_SM_CLOSE: Couldn't close shm segment %s
Explanation PIM process failed to remove shared memory resource. Parameters are: Shared Memory Segment Name
Recommended Action No special action is required.
Error Message PIM-3-PIM_LIB_SM_OPEN: Couldn't open shm segment %s errno: %s
Explanation PIM process failed to initialize shared memory resource. Parameters are: Shared Memory Segment Name
Recommended Action Dump core, then restart component.
Error Message PIM-3-POLICY_INVALID_BINDACK: Invalid RPM bind ack in %s
Explanation PIM received invalid policy response from RPM.
Recommended Action No special action is required.
Error Message PIM-3-POLICY_INVALID_TYPE: Invalid RPM type %d in %s
Explanation PIM received invalid policy-type from RPM.
Recommended Action No special action is required.
Error Message PIM-3-PSS_FAILED: PSS operation %s failed in %s
Explanation PIM process failed in a PSS operation. Parameters are: Operation Name
Recommended Action No special action is required.
Error Message PIM-3-PT_ADD: Couldn't add %s to local PT
Explanation PIM failed to update the local route-table entry. Parameters are: Addresses
Recommended Action No special action is required.
Error Message PIM-3-PT_DEL: Couldn't delete %s from local PT
Explanation PIM failed to delete the local route-table entry. Parameters are: Address
Recommended Action No special action is required.
Error Message PIM-3-PTHREAD_CREATE: Couldn't create thread %s
Explanation PIM process failed to create a task thread. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message PIM-3-PTHREAD_FAILED: pthread_create() failed for %s
Explanation PIM process failed to create a task thread.
Recommended Action Dump core, then reload the stack.
Error Message PIM-3-PURGE_FAIL: Purging of PIM cache failed for VRF %s
Explanation Unable to purge PIM cache. Parameters are: VRF name
Recommended Action No special action is required.
Error Message PIM-3-RDLOCK_ASSERT: %s:%d: Assert, read-lock not acquired
Explanation Caller Failed to get PIM Shared Memory read lock. Parameters are: Function Name, Line
Recommended Action No special action is required.
Error Message PIM-3-RECOVERY_FAIL: Recovery failed for %s DB
Explanation Unable recover a PIM database. Parameters are: Database name
Recommended Action No special action is required.
Error Message PIM-3-REMOVE_TXLIST_ELEMENT: Couldn't remove the txlist element for route %s in %s
Explanation PIM failed to remove the txlist element for the route. Parameters are: Addresses, Function Name
Recommended Action No special action is required.
Error Message PIM-3-RESERVE_LIMIT: Exceeded reserve-limit for VRF %s - dropping
Explanation Exceeded the reserve-limit for VRF. Parameters are: VRF
Recommended Action No special action is required.
Error Message PIM-3-RESTART_REASON: PIM process has restarted, restart reason: %s\n
Explanation PIM is restoring the routes it had added in previous instance. Parameters are: Restart Reason
Recommended Action No special action is required.
Error Message PIM-3-RLIMIT: Couldn't set PIM data segment size to %lu
Explanation PIM process could not set itself memory resource limit, exiting. Parameters are: Segment Size
Recommended Action No special action is required.
Error Message PIM-3-SETSOCKOPT: setsockopt() on %s failed: %s
Explanation PIM failed in UDP socket operation. Auto-RP will not work. Parameters are: Message StringError String
Recommended Action Dump core, then restart component.
Error Message PIM-3-SETUP_ROUTE: Couldn't setup PIM route %s in %s
Explanation PIM failed to install route in the local route-table. Parameters are: Address, Function Name
Recommended Action No special action is required.
Error Message PIM-3-SG_EXP_TMR_VRF: \ip pim sg-expiry-timer\ value in VRF %s not supported in %s, please reconfigure within range %d-%d
Explanation Configuration not supported in ISSU target version, please reconfigure. Parameters are: VRF name, lower bound, upper bound
Recommended Action ACTION_SW_NONE.
Error Message PIM-3-SG_EXP_TMR_VRFS: \ip pim sg-expiry-timer\ value in %d VRFs not supported in %s, please reconfigure within range %d-%d
Explanation Configuration not supported in ISSU target version, please reconfigure. Parameters are: VRF count, lower bound, upper bound
Recommended Action ACTION_SW_NONE.
Error Message PIM-3-SHARED_DB_PUB_INIT: Could not do shared database publisher initialization for interfaces rc=0x%x [%s]
Explanation Unable to do shared db publisher initialization. Parameters are: Status Error, Syserror string
Recommended Action Dump core, then restart component.
Error Message PIM-3-SHUTDOWN_FM: FM could not shut down PIM process
Explanation FM could not shut down PIM process.
Recommended Action Dump core, then restart component.
Error Message PIM-3-SLAB_ALLOC: Slab alloc of type %s failed in %s
Explanation PIM process failed to allocate Slab memory. Parameters are: Structure Type, Function Name
Recommended Action Configure the network or router to decrease the number of routes.
Error Message PIM-3-SLAB_CREATE: Slab alloc of type %s failed
Explanation PIM process failed to allocate Slab memory. Parameters are: Structure Type
Recommended Action Configure the network or router to decrease the number of routes.
Error Message PIM-3-SM_CREATE: Couldn't create shm segment %s
Explanation PIM process failed to initialize shared memory resource. Parameters are: Shared Memory Segment Name
Recommended Action Dump core, then restart component.
Error Message PIM-3-SMALLOC: Shared mem malloc (%lu) failed in %s
Explanation PIM process is out of free shared memory. Parameters are: Type of malloc(size), Function Name
Recommended Action Configure the network or router to decrease the number of routes.
Error Message PIM-3-SOCKET: socket() for %s failed: %s
Explanation PIM failed to obtain UDP socket. Auto-RP will not work. Parameters are: FunctionError String
Recommended Action Dump core, then restart component.
Error Message PIM-3-STATE_LIMIT: Exceeded state-limit for VRF %s - dropping
Explanation Exceeded the state-limit for VRF. Parameters are: VRF
Recommended Action No special action is required.
Error Message PIM-3-SUBCR_INIT: Could not initialize shared database client for interfaces rc=0x%x [%s]
Explanation Unable to do subscriber init to access IM shared-dbs. Parameters are: Status Error, Syserror string
Recommended Action Dump core, then restart component.
Error Message PIM-3-SYSMGR_DISPATCH: Error returned from sysmgr_dispatch(), errno: %s
Explanation PIM called a System Manager API which returned an error.
Recommended Action Dump core, then restart component.
Error Message PIM-3-THREAD_SHUTDOWN: Couldn't shutdown thread %s
Explanation PIM failed to shut down a task thread. Parameters are: Thread Name
Recommended Action No special action is required.
Error Message PIM-3-TIMER_CREATE: Couldn't create %s timer for %s
Explanation PIM failed to initialize timer resource. Parameters are: Timer Name, Timer description
Recommended Action Dump core, then restart component.
Error Message PIM-3-TIMER_SET_INIT: Couldn't init %s active timer set
Explanation PIM failed to initialize timer resource. Parameters are: Timer Name
Recommended Action Dump core, then restart component.
Error Message PIM-3-TIMER_START: Couldn't start %s timer
Explanation PIM failed to initialize timer resource. Parameters are: Timer Name
Recommended Action Dump core, then restart component.
Error Message PIM-3-TUNNEL_ADD_FAIL: Unable to add tunnel info into the list for vrf %s failed in %s
Explanation MVPN tunnel setup failed. Parameters are: VRF name, Function name
Recommended Action Dump core, then restart component.
Error Message PIM-3-TUNNEL_ADD_TLV_FAIL: Unable to add tunnel tlv %s into the list for vrf %s
Explanation MVPN tunnel setup failed. Parameters are: Tlv Type, VRF name
Recommended Action Dump core, then restart component.
Error Message PIM-3-TUNNEL_CREATE_FAIL: Unable to setup tunnel interface for vrf %s failed in %s
Explanation MVPN tunnel setup failed. Parameters are: VRF name, Function name
Recommended Action Dump core, then restart component.
Error Message PIM-3-TXLIST_CREATE: Couldn't create txlist for %s
Explanation PIM failed to create txlist resource. Parameters are: Data type
Recommended Action Dump core, then restart component.
Error Message PIM-3-UDP_READ: Error reading UDP socket
Explanation UDP Socket Error.
Recommended Action Dump core, then restart component.
Error Message PIM-3-UDP_SENDTO: udp_sendto() on %s failed: %s
Explanation PIM failed to send over UDP socket. Parameters are: Message StringError String
Recommended Action No special action is required.
Error Message PIM-3-UNKNOWN_MINOR: Minor type %d is unknown, received in %s
Explanation PIM process received unknown Interprocess message, dropped. Parameters are: Minor type
Recommended Action No special action is required.
Error Message PIM-3-UNKNOWN_MJR: Major type 0x%x unknown
Explanation PIM process received unknown Interprocess message, dropped. Parameters are: Major type
Recommended Action No special action is required.
Error Message PIM-3-URIB_CONTEXT: Couldn't get URIB VRF %s
Explanation PIM failed to obtain unicast routing VRF from URIB.
Recommended Action Dump core, then restart component.
Error Message PIM-3-WRLOCK_ASSERT: %s:%d: Assert, write-lock not acquired
Explanation Caller Failed to get PIM Shared Memory write lock. Parameters are: Function Name, Line
Recommended Action No special action is required.
Error Message PIM-4-DUP_VPC_NBR: Unexpected 2nd vPC peer %s detected (peer %s) on %s (domain %d misconfig?)
Explanation Unable to register opcodes. Parameters are: Service / Queue description
Recommended Action Dump core, then restart component.
Error Message PIM-4-HELLO_INT: Configured PIM hello interval %dms on interface %s is less than the supported minimum value of %dms, using the minimum value\n
Explanation PIM minimum hello interval. Parameters are: Hello interval, Interface, Min Hello interval
Recommended Action No special action is required.
Error Message PIM-5-DR_CHANGE: DR change from %s to %s on interface %s
Explanation PIM Designated router changed on the interface. Parameters are: Old DR address, New DR address, Interface
Recommended Action No special action is required.
Error Message PIM-5-NBR_CHANGE: Neighbor %s %s on interface %s
Explanation PIM neighbor went up/down due to Hello-message seen/lost. Parameters are: Neighbor IP address, Neighbor state, Interface
Recommended Action No special action is required.
Error Message PIM-5-SSM_RANGE_DELETED: Invalid SSM range configuration for VRF %s has been deleted
Explanation Invalid PIM SSM Range configuration has been deleted due to failing check. Parameters are: VRF Name
Recommended Action No special action is required.
Error Message PIM-6-IF_DEPEND: Removed interface (%s) has %s dependency
Explanation There is residual configuration on the deleted interface. Parameters are: Interface name, Dependent Config Command
Recommended Action No special action is required.
Error Message PIM-6-MAX_RPS: Cannot store bidir-RP %s, a maximum of %d are supported
Explanation Due to hardware limitations, there is a maximum number of Bidir-PIM RPs that can be stored.
Recommended Action No special action is required.
Error Message PIM-6-MQFLUSHED: Flushing %lu messages from %s mq
Explanation Flushing old residual messages fom the message-queue.
Recommended Action No special action is required.
Error Message PIM-6-MQLOOP_UNKNOWN_MSG: Received unknown message %d/%d
Explanation PIM process received unknown Interprocess message, dropped.
Recommended Action No special action is required.
Error Message PIM-6-NEGATIVE_PREFIX: Group prefix %s/%d from RP %s has negative-bit set, ignore group entry
Explanation The RP is advertising a group range to be in dense-mode. This implementation only supports sparse-mode so the group entry will be ignored. Parameters are: Group Address, Mask length, RP Address
Recommended Action No special action is required.
Error Message PIM-6-PIM_LIB_API_FAILED_GET_PCIB: %s failed in %s
Explanation PIM client failed in invoking an API. Parameters are: Function Name
Recommended Action No special action is required.
Error Message PIM-6-PIM_LIB_API_FAILED_GET_RP: %s failed in %s
Explanation PIM client failed in invoking an API. Parameters are: Function Name
Recommended Action No special action is required.
Error Message PIM-6-RESERVE_LIMIT_WARNING: Exceeded 80 percent of the reserve-limit for VRF %s
Explanation Exceeded 80 percent of the reserve-limit for VRF. Parameters are: VRF
Recommended Action No special action is required.
Error Message PIM-6-RESTART_SHUTDOWN: PIM shutting self down via restart command
Explanation PIM process is shutting itself down due to the restartcommand.
Recommended Action No special action is required.
Error Message PIM-6-ROUTE_LOOKUP: Couldn't find PIM route %s in %s
Explanation PIM failed to find entry in the local route-table. Parameters are: Address, Function Name
Recommended Action No special action is required.
Error Message PIM-6-SHM_RESTART_REASON: PIM process has restarted, restart reason: %s\n
Explanation PIM is restoring the routes it had added in previous instance. Parameters are: Restart Reason
Recommended Action No special action is required.
Error Message PIM-6-SHUTDOWN_SELF: PIM shutting self down
Explanation PIM process is shutting itself down.
Recommended Action No special action is required.
Error Message PIM-6-SHUTDOWN: Shutting down PIM process
Explanation PIM received a shutdown request.
Recommended Action No special action is required.
Error Message PIM-6-STATE_LIMIT_WARNING: Exceeded 80 percent of the state-limit for VRF %s
Explanation Exceeded 80 precent of the state-limit for VRF. Parameters are: VRF
Recommended Action No special action is required.
Error Message PIM-6-UNKNOWN_OPC: Received unknown mts opcode %d
Explanation PIM process received unknown Interprocess message, dropped. Parameters are: MTS Opcode
Recommended Action No special action is required.
This section contains the PIM6 messages.
Error Message PIM6-2-SHM_LOCK_CREAT: Failed to create shared memory lock: %s
Explanation INITIALIZATION_FAILURE_EXPLANATION. Parameters are: Error Name
Recommended Action Reload the stack.
Error Message PIM6-2-STARTUP_DEBUG: %s in %s
Explanation INITIALIZATION_FAILURE_EXPLANATION. Parameters are: Error, Function Name
Recommended Action No special action is required.
Error Message PIM6-3-ADD_ROUTE: Couldn't add PIM6 route %s in %s
Explanation PIM6 failed to update the local route-table entry. Parameters are: Addresses, Function Name
Recommended Action No special action is required.
Error Message PIM6-3-ADD_RP_FAIL: %s: %s for group %s
Explanation PIM6 API for getting RP address failed. Parameters are: Function Name, reason, group address
Recommended Action No special action is required.
Error Message PIM6-3-API_CLOSE: Couldn't close %s API
Explanation PIM6 failed to close API opened with the component. Parameters are: Component Name
Recommended Action No special action is required.
Error Message PIM6-3-API_FAILED: %s failed in %s
Explanation PIM6 process failed in invoking an API. Parameters are: Function Name
Recommended Action No special action is required.
Error Message PIM6-3-API_INIT: Couldn't initialize %s API
Explanation PIM6 failed to open API to interact with the component. Parameters are: Component Name
Recommended Action No special action is required.
Error Message PIM6-3-ATTACH_SHM: Couldn't attach to shm of %s
Explanation PIM6 process failed to open a shared memory resource. Parameters are: Shared Memory Segment Name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-AVL_ERROR: AVL-tree operation %s failed for %s
Explanation PIM6 process failed in an AVL-tree manipulation. Parameters are: AVL tree operation, Tree name
Recommended Action No special action is required.
Error Message PIM6-3-BF_CONVERT: bitfield_convert() failed
Explanation PIM6 failed to convert a compressed bitfield.
Recommended Action Dump core, then restart component.
Error Message PIM6-3-BF_CREATE: Couldn't create %s bitfield
Explanation PIM6 failed to create bitfield resource. Parameters are: List Name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-BF_FAILED: Bitfield API %s failed for %s bitfield
Explanation PIM6 failed perfor bitfield function. Parameters are: API name, Function Name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-BIND: bind() on %s failed: %s
Explanation PIM6 failed to bind UDP socket. Auto-RP will not work. Parameters are: FunctionError String
Recommended Action Dump core, then restart component.
Error Message PIM6-3-COMP_DEREG: Unable to de-register with %s
Explanation PIM6 failed to de-register with a server component. Parameters are: Component Name
Recommended Action No special action is required.
Error Message PIM6-3-COMP_REG: Unable to register with %s
Explanation PIM6 failed to register with a server component. Parameters are: Component Name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-CONFCHECK: Failed to %s Tunnel multicast concheck Capability. error: %s
Explanation Could not add/delete confcheck capability. Parameters are: Operation, Error
Recommended Action No special action is required.
Error Message PIM6-3-CREATE_ROUTE: Couldn't create PIM6 route for %s in %s
Explanation PIM6 failed to update the local route-table entry. Parameters are: Addresses, Function Name
Recommended Action No special action is required.
Error Message PIM6-3-CV_INIT: Couldn't init cond var %s
Explanation PIM6 process failed to initialize conditional-variable resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-DEL_IF: Couldn't delete interface %s from PIM6 route %s in %s
Explanation PIM6 failed to delete the outgoing interface from route-table entry. Parameters are: Interface, Addresses, Function Name
Recommended Action No special action is required.
Error Message PIM6-3-DEL_ROUTE: Couldn't delete PIM6 route %s in %s
Explanation PIM6 failed to delete the local route-table entry. Parameters are: Addresses, Function Name
Recommended Action No special action is required.
Error Message PIM6-3-FREE_ROUTE: Couldn't free PIM6 route %s in %s
Explanation PIM6 failed to delete the route-table entry. Parameters are: Addresses, Function Name
Recommended Action No special action is required.
Error Message PIM6-3-GET_RP_FAIL: %s: %s for group %s
Explanation PIM6 API for getting RP address failed. Parameters are: Function Name, reason, group address
Recommended Action No special action is required.
Error Message PIM6-3-HA_FAILURE: %s
Explanation PIM6 process failed in a HA operation. Parameters are: String describing what failed
Recommended Action No special action is required.
Error Message PIM6-3-HA_INVALID_MVPN_MDT: Values of mdt pointer invalid in %s
Explanation Invalid mdt pointer.
Recommended Action No special action is required.
Error Message PIM6-3-HA_INVALID_POINTER: %s: %s invalid pointer
Explanation Invalid pointer to invoke HA functions.
Recommended Action No special action is required.
Error Message PIM6-3-HA_KEYTYPE_MISMATCHED: Keytype %d mismatched, expected %d
Explanation Key type not matching.
Recommended Action No special action is required.
Error Message PIM6-3-HEARTBEAT_TIMER: Unable to create heartbeat timer in %s
Explanation Unable to create heartbeat timer. Parameters are: Function Name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-IGMP_DOWN: Couldn't enable PIM6 on %s, IGMP is not up
Explanation PIM6 is not enabled on the interface, as it requires IGMP to be up. Parameters are: Interface
Recommended Action No special action is required.
Error Message PIM6-3-IM_EXT: Couldn't set IM-extension for interface %s
Explanation PIM6 process failed to set IM extension. Parameters are: Interface
Recommended Action Dump core, then restart component.
Error Message PIM6-3-INIT_MTS_SAP: mts_bind() failed in pim_init_mts(), errno: %s
Explanation Unable to open MTS SAP. Parameters are: Error String
Recommended Action Dump core, then restart component.
Error Message PIM6-3-INVALID_GROUP: Operation for invalid group %s received in %s
Explanation PIM6 process received invalid group. Parameters are: Group, Function
Recommended Action No special action is required.
Error Message PIM6-3-INVALID_MBUF: Received invalid mbuf pointer in %s
Explanation PIM6 received invalid data buffer, discarded.
Recommended Action No special action is required.
Error Message PIM6-3-INVALID_PARAM: Invalid parameters passed to %s
Explanation Invalid parameters passed to a function. Parameters are: Function name
Recommended Action No special action is required.
Error Message PIM6-3-LIB_API_FAILED: %s failed in %s
Explanation PIM6 client failed in invoking an API. Parameters are: Function Name
Recommended Action No special action is required.
Error Message PIM6-3-LIB_INT_ERROR: %s in %s()
Explanation PIM6 API encountered an error during internal processing. Parameters are: Error, PIM6 Function
Recommended Action Report the issue to Customer Support.
Error Message PIM6-3-LIB_MALLOC: Private mem malloc (%lu) failed in %s
Explanation Process is out of free private memory. Parameters are: Type of malloc(size), Function Name
Recommended Action Configure the network or router to decrease the number of routes.
Error Message PIM6-3-LIB_MTS_SEND: mts_send() failed for %s, errno: %s
Explanation Process called a MTS API which returned an error. Parameters are: Error String
Recommended Action Dump core, then restart component.
Error Message PIM6-3-MALLOC: Private mem malloc (%lu) failed in %s
Explanation PIM6 process is out of free private memory. Parameters are: Type of malloc(size), Function Name
Recommended Action Configure the network or router to decrease the number of routes.
Error Message PIM6-3-MAX_GRANGES: Max Granges allowed to be configured for use shared tree config is %d
Explanation Exceeded the group range limit.
Recommended Action No special action is required.
Error Message PIM6-3-MAX_ROUTES: Exceeded max allowed routes to be sent to MRIB
Explanation Exceeded max allowed routes to be sent to MRIB.
Recommended Action No special action is required.
Error Message PIM6-3-MCEC_MSG: %s
Explanation PIM6 VPC related messages. Parameters are: String
Recommended Action Dump core, then restart component.
Error Message PIM6-3-MQCLOSE: Couldn't close %s mq: %s
Explanation PIM6 failed to close the message-queue resource.
Recommended Action No special action is required.
Error Message PIM6-3-MQFLUSH: Couldn't flush %s mq: %s
Explanation PIM6 failed to remove stale messages from the message-queue.
Recommended Action No special action is required.
Error Message PIM6-3-MQLOOP_CREATE: Couldn't create %s mqloop: %s
Explanation PIM6 failed to create the mqloop resource. Parameters are: MSG Queue Name, Error String
Recommended Action Dump core, then restart component.
Error Message PIM6-3-MQLOOP_REGHAND: Couldn't register all handlers for %s mqloop
Explanation PIM6 failed to initialize handlers the mqloop resource. Parameters are: MSG Queue Name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-MQLOOP_SHUTDOWN: Couldn't shutdown %s mqloop
Explanation PIM6 failed to shutdown the mqloop resource. Parameters are: MSG Queue Name
Recommended Action No special action is required.
Error Message PIM6-3-MQLOOP_START: Couldn't start %s mqloop
Explanation PIM6 failed to initialize the mqloop resource. Parameters are: MSG Queue Name, Error String
Recommended Action Dump core, then restart component.
Error Message PIM6-3-MQOPEN: Couldn't open %s mq: %s
Explanation PIM6 failed to open the message-queue resource. Parameters are: Component, Function Name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-MQSEND: mq_send() error on %s queue in %s
Explanation PIM6 failed to send an IPC message on the message-queue. Parameters are: Component, Function Name
Recommended Action No special action is required.
Error Message PIM6-3-MRIB_ADD_ROUTE: MRIB add route failed in %s
Explanation PIM6 failed to add route in MRIB. Parameters are: Function Name
Recommended Action No special action is required.
Error Message PIM6-3-MRIB_DEL_ROUTE: MRIB delete route failed in %s
Explanation PIM6 failed to delete route in MRIB. Parameters are: Function Name
Recommended Action No special action is required.
Error Message PIM6-3-MRIB_NO_SHARED_TREE: MRIB shared tree entry absent for group %s/%d
Explanation MRIB route unexpectedly absent for a group entry. Parameters are: Group addressGroup mask length
Recommended Action No special action is required.
Error Message PIM6-3-MSDP_ORIG_DATASA: Couldn't originate MSDP data SA in %s
Explanation PIM6 failed to notify MSDP to originate data SA message. Parameters are: Function Name
Recommended Action No special action is required.
Error Message PIM6-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation PIM6 called a MTS API which returned an error. Parameters are: Error String
Recommended Action Dump core, then restart component.
Error Message PIM6-3-MTS_INIT: Could not initialize MTS for %s
Explanation Unable to register opcodes. Parameters are: Service / Queue description
Recommended Action Dump core, then restart component.
Error Message PIM6-3-MTS_RECV: Error returned from mts_recv(), errno: %s
Explanation PIM6 called a MTS API which returned an error. Parameters are: Error String
Recommended Action Dump core, then restart component.
Error Message PIM6-3-MTS_REGISTER: mts_register failed for PIM6: %s
Explanation PIM6 was unable to register an MTS notification.
Recommended Action No special action is required.
Error Message PIM6-3-MTS_SEND: mts_send() failed for %s, errno: %s
Explanation PIM6 called a MTS API which returned an error. Parameters are: Error String
Recommended Action Dump core, then restart component.
Error Message PIM6-3-MTS_UNBIND: mts_unbind() failed in %s for queue %s with err: %s
Explanation mts_unbind failure. Parameters are: Function name, Queue name, Error String
Recommended Action Dump core, then restart component.
Error Message PIM6-3-MTSOPEN: Couldn't bind %s mts-q: %s
Explanation PIM6 failed to open the MTS-queue resource. Parameters are: MSG Queue Name, Error String
Recommended Action Dump core, then restart component.
Error Message PIM6-3-MUTEX_INIT: Couldn't init mutex %s
Explanation PIM6 process failed to initialize mutex system resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-MV_INIT: Couldn't init mutex %s
Explanation PIM6 process failed to initialize mutex system resource. Parameters are: Data type
Recommended Action Dump core, then restart component.
Error Message PIM6-3-NO_SET_PRIORITY: Failed to set policy or priority
Explanation PIM6 process could not set itself process priority, exiting.
Recommended Action No special action is required.
Error Message PIM6-3-OIM_REGISTER_FAIL: Unable to register with OIM module in %s
Explanation MVPN module couldnt register with OIM module. Parameters are: API name, Function name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-OPCODE_REG: Could not register opcode 0x%x, reason %s
Explanation Unable to register opcodes. Parameters are: MTS Opcode, Error string
Recommended Action Dump core, then restart component.
Error Message PIM6-3-PIM_API_NOT_INIT: PIM6 API not initialized
Explanation PIM6 API is not initialized.
Recommended Action No special action is required.
Error Message PIM6-3-PIM_BFD_ADD_FAIL: %s request for interface %s failed in %s
Explanation BFD session add failed. Parameters are: API name, Interface name, Function name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-PIM_BFD_API_FAIL: %s request failed in %s
Explanation BFD API failed. Parameters are: API name, Function name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-PIM_BFD_REMOVE_FAIL: Session remove request for neighbor %s on interface %s failed (%s)
Explanation BFD session add failed. Parameters are: Neighbor IP, Interface name, Error
Recommended Action Dump core, then restart component.
Error Message PIM6-3-PIM_BFD_SEND_AUTO_EXPIRY: Unable to start BFD staling, error %s
Explanation PIM6 BFD staling API failed. Parameters are: Error string
Recommended Action Dump core, then restart component.
Error Message PIM6-3-PIM_BFD_SES_REMOVE_ALL: Unable to cleanup the BFD sessions during deconfiguration, error %s
Explanation Unable to cleanup BFD sessions. Parameters are: Error string
Recommended Action Report the issue to Customer Support.
Error Message PIM6-3-PIM_CIB: Couldn't find PIM6 VRF for %s
Explanation PIM6 failed to obtain its VRF info block. Parameters are: Interface
Recommended Action Dump core, then restart component.
Error Message PIM6-3-PIM_EXISTS: PIM6 is already running, process exiting
Explanation Another PIM6 process is already running, this process will shutdown.
Recommended Action No special action is required.
Error Message PIM6-3-PIM_INIT: PIM6 init failed: %s
Explanation PIM6 process initialization failed. Parameters are: Component Name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-PIM_LIB_API_FAILED: %s failed in %s
Explanation PIM6 client failed in invoking an API. Parameters are: Function Name
Recommended Action No special action is required.
Error Message PIM6-3-PIM_LIB_API_INIT: Couldn't initialize %s API
Explanation PIM6 failed to open API to interact with the component. Parameters are: Component Name
Recommended Action No special action is required.
Error Message PIM6-3-PIM_LIB_MALLOC: Private mem malloc (%lu) failed in %s
Explanation Process is out of free private memory. Parameters are: Type of malloc(size), Function Name
Recommended Action Configure the network or router to decrease the number of routes.
Error Message PIM6-3-PIM_LIB_SM_CLOSE: Couldn't close shm segment %s
Explanation PIM6 process failed to remove shared memory resource. Parameters are: Shared Memory Segment Name
Recommended Action No special action is required.
Error Message PIM6-3-PIM_LIB_SM_OPEN: Couldn't open shm segment %s errno: %s
Explanation PIM6 process failed to initialize shared memory resource. Parameters are: Shared Memory Segment Name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-POLICY_INVALID_BINDACK: Invalid RPM bind ack in %s
Explanation PIM6 received invalid policy response from RPM.
Recommended Action No special action is required.
Error Message PIM6-3-POLICY_INVALID_TYPE: Invalid RPM type %d in %s
Explanation PIM6 received invalid policy-type from RPM.
Recommended Action No special action is required.
Error Message PIM6-3-PSS_FAILED: PSS operation %s failed in %s
Explanation PIM6 process failed in a PSS operation. Parameters are: Operation Name
Recommended Action No special action is required.
Error Message PIM6-3-PT_ADD: Couldn't add %s to local PT
Explanation PIM6 failed to update the local route-table entry. Parameters are: Addresses
Recommended Action No special action is required.
Error Message PIM6-3-PT_DEL: Couldn't delete %s from local PT
Explanation PIM6 failed to delete the local route-table entry. Parameters are: Address
Recommended Action No special action is required.
Error Message PIM6-3-PTHREAD_CREATE: Couldn't create thread %s
Explanation PIM6 process failed to create a task thread. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-PTHREAD_FAILED: pthread_create() failed for %s
Explanation PIM6 process failed to create a task thread.
Recommended Action Dump core, then reload the stack.
Error Message PIM6-3-PURGE_FAIL: Purging of PIM6 cache failed for VRF %s
Explanation Unable to purge PIM6 cache. Parameters are: VRF name
Recommended Action No special action is required.
Error Message PIM6-3-RDLOCK_ASSERT: %s:%d: Assert, read-lock not acquired
Explanation Caller Failed to get PIM6 Shared Memory read lock. Parameters are: Function Name, Line
Recommended Action No special action is required.
Error Message PIM6-3-RECOVERY_FAIL: Recovery failed for %s DB
Explanation Unable recover a PIM6 database. Parameters are: Database name
Recommended Action No special action is required.
Error Message PIM6-3-REMOVE_TXLIST_ELEMENT: Couldn't remove the txlist element for route %s in %s
Explanation PIM6 failed to remove the txlist element for the route. Parameters are: Addresses, Function Name
Recommended Action No special action is required.
Error Message PIM6-3-RESERVE_LIMIT: Exceeded reserve-limit for VRF %s - dropping
Explanation Exceeded the reserve-limit for VRF. Parameters are: VRF
Recommended Action No special action is required.
Error Message PIM6-3-RESTART_REASON: PIM6 process has restarted, restart reason: %s\n
Explanation PIM6 is restoring the routes it had added in previous instance. Parameters are: Restart Reason
Recommended Action No special action is required.
Error Message PIM6-3-RLIMIT: Couldn't set PIM6 data segment size to %lu
Explanation PIM6 process could not set itself memory resource limit, exiting. Parameters are: Segment Size
Recommended Action No special action is required.
Error Message PIM6-3-SETSOCKOPT: setsockopt() on %s failed: %s
Explanation PIM6 failed in UDP socket operation. Auto-RP will not work. Parameters are: Message StringError String
Recommended Action Dump core, then restart component.
Error Message PIM6-3-SETUP_ROUTE: Couldn't setup PIM6 route %s in %s
Explanation PIM6 failed to install route in the local route-table. Parameters are: Address, Function Name
Recommended Action No special action is required.
Error Message PIM6-3-SG_EXP_TMR_VRF: \ip pim6 sg-expiry-timer\ value in VRF %s not supported in %s, please reconfigure within range %d-%d
Explanation Configuration not supported in ISSU target version, please reconfigure. Parameters are: VRF name, lower bound, upper bound
Recommended Action ACTION_SW_NONE.
Error Message PIM6-3-SG_EXP_TMR_VRFS: \ip pim6 sg-expiry-timer\ value in %d VRFs not supported in %s, please reconfigure within range %d-%d
Explanation Configuration not supported in ISSU target version, please reconfigure. Parameters are: VRF count, lower bound, upper bound
Recommended Action ACTION_SW_NONE.
Error Message PIM6-3-SHARED_DB_PUB_INIT: Could not do shared database publisher initialization for interfaces rc=0x%x [%s]
Explanation Unable to do shared db publisher initialization. Parameters are: Status Error, Syserror string
Recommended Action Dump core, then restart component.
Error Message PIM6-3-SHUTDOWN_FM: FM could not shut down PIM6 process
Explanation FM could not shut down PIM6 process.
Recommended Action Dump core, then restart component.
Error Message PIM6-3-SLAB_ALLOC: Slab alloc of type %s failed in %s
Explanation PIM6 process failed to allocate Slab memory. Parameters are: Structure Type, Function Name
Recommended Action Configure the network or router to decrease the number of routes.
Error Message PIM6-3-SLAB_CREATE: Slab alloc of type %s failed
Explanation PIM6 process failed to allocate Slab memory. Parameters are: Structure Type
Recommended Action Configure the network or router to decrease the number of routes.
Error Message PIM6-3-SM_CREATE: Couldn't create shm segment %s
Explanation PIM6 process failed to initialize shared memory resource. Parameters are: Shared Memory Segment Name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-SMALLOC: Shared mem malloc (%lu) failed in %s
Explanation PIM6 process is out of free shared memory. Parameters are: Type of malloc(size), Function Name
Recommended Action Configure the network or router to decrease the number of routes.
Error Message PIM6-3-SOCKET: socket() for %s failed: %s
Explanation PIM6 failed to obtain UDP socket. Auto-RP will not work. Parameters are: FunctionError String
Recommended Action Dump core, then restart component.
Error Message PIM6-3-STATE_LIMIT: Exceeded state-limit for VRF %s - dropping
Explanation Exceeded the state-limit for VRF. Parameters are: VRF
Recommended Action No special action is required.
Error Message PIM6-3-SUBCR_INIT: Could not initialize shared database client for interfaces rc=0x%x [%s]
Explanation Unable to do subscriber init to access IM shared-dbs. Parameters are: Status Error, Syserror string
Recommended Action Dump core, then restart component.
Error Message PIM6-3-SYSMGR_DISPATCH: Error returned from sysmgr_dispatch(), errno: %s
Explanation PIM6 called a System Manager API which returned an error.
Recommended Action Dump core, then restart component.
Error Message PIM6-3-THREAD_SHUTDOWN: Couldn't shutdown thread %s
Explanation PIM6 failed to shut down a task thread. Parameters are: Thread Name
Recommended Action No special action is required.
Error Message PIM6-3-TIMER_CREATE: Couldn't create %s timer for %s
Explanation PIM6 failed to initialize timer resource. Parameters are: Timer Name, Timer description
Recommended Action Dump core, then restart component.
Error Message PIM6-3-TIMER_SET_INIT: Couldn't init %s active timer set
Explanation PIM6 failed to initialize timer resource. Parameters are: Timer Name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-TIMER_START: Couldn't start %s timer
Explanation PIM6 failed to initialize timer resource. Parameters are: Timer Name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-TUNNEL_ADD_FAIL: Unable to add tunnel info into the list for vrf %s failed in %s
Explanation MVPN tunnel setup failed. Parameters are: VRF name, Function name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-TUNNEL_ADD_TLV_FAIL: Unable to add tunnel tlv %s into the list for vrf %s
Explanation MVPN tunnel setup failed. Parameters are: Tlv Type, VRF name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-TUNNEL_CREATE_FAIL: Unable to setup tunnel interface for vrf %s failed in %s
Explanation MVPN tunnel setup failed. Parameters are: VRF name, Function name
Recommended Action Dump core, then restart component.
Error Message PIM6-3-TXLIST_CREATE: Couldn't create txlist for %s
Explanation PIM6 failed to create txlist resource. Parameters are: Data type
Recommended Action Dump core, then restart component.
Error Message PIM6-3-UDP_READ: Error reading UDP socket
Explanation UDP Socket Error.
Recommended Action Dump core, then restart component.
Error Message PIM6-3-UDP_SENDTO: udp_sendto() on %s failed: %s
Explanation PIM6 failed to send over UDP socket. Parameters are: Message StringError String
Recommended Action No special action is required.
Error Message PIM6-3-UNKNOWN_MINOR: Minor type %d is unknown, received in %s
Explanation PIM6 process received unknown Interprocess message, dropped. Parameters are: Minor type
Recommended Action No special action is required.
Error Message PIM6-3-UNKNOWN_MJR: Major type 0x%x unknown
Explanation PIM6 process received unknown Interprocess message, dropped. Parameters are: Major type
Recommended Action No special action is required.
Error Message PIM6-3-URIB_CONTEXT: Couldn't get URIB VRF %s
Explanation PIM6 failed to obtain unicast routing VRF from URIB.
Recommended Action Dump core, then restart component.
Error Message PIM6-3-WRLOCK_ASSERT: %s:%d: Assert, write-lock not acquired
Explanation Caller Failed to get PIM6 Shared Memory write lock. Parameters are: Function Name, Line
Recommended Action No special action is required.
Error Message PIM6-4-DUP_VPC_NBR: Unexpected 2nd vPC peer %s detected (peer %s) on %s (domain %d misconfig?)
Explanation Unable to register opcodes. Parameters are: Service / Queue description
Recommended Action Dump core, then restart component.
Error Message PIM6-4-HELLO_INT: Configured PIM6 hello interval %dms on interface %s is less than the supported minimum value of %dms, using the minimum value\n
Explanation PIM6 minimum hello interval. Parameters are: Hello interval, Interface, Min Hello interval
Recommended Action No special action is required.
Error Message PIM6-5-DR_CHANGE: DR change from %s to %s on interface %s
Explanation PIM6 Designated router changed on the interface. Parameters are: Old DR address, New DR address, Interface
Recommended Action No special action is required.
Error Message PIM6-5-NBR_CHANGE: Neighbor %s %s on interface %s
Explanation PIM6 neighbor went up/down due to Hello-message seen/lost. Parameters are: Neighbor IP address, Neighbor state, Interface
Recommended Action No special action is required.
Error Message PIM6-5-SSM_RANGE_DELETED: Invalid SSM range configuration for VRF %s has been deleted
Explanation Invalid PIM6 SSM Range configuration has been deleted due to failing check. Parameters are: VRF Name
Recommended Action No special action is required.
Error Message PIM6-6-IF_DEPEND: Removed interface (%s) has %s dependency
Explanation There is residual configuration on the deleted interface. Parameters are: Interface name, Dependent Config Command
Recommended Action No special action is required.
Error Message PIM6-6-MAX_RPS: Cannot store bidir-RP %s, a maximum of %d are supported
Explanation Due to hardware limitations, there is a maximum number of Bidir-PIM6 RPs that can be stored.
Recommended Action No special action is required.
Error Message PIM6-6-MQFLUSHED: Flushing %lu messages from %s mq
Explanation Flushing old residual messages fom the message-queue.
Recommended Action No special action is required.
Error Message PIM6-6-MQLOOP_UNKNOWN_MSG: Received unknown message %d/%d
Explanation PIM6 process received unknown Interprocess message, dropped.
Recommended Action No special action is required.
Error Message PIM6-6-NEGATIVE_PREFIX: Group prefix %s/%d from RP %s has negative-bit set, ignore group entry
Explanation The RP is advertising a group range to be in dense-mode. This implementation only supports sparse-mode so the group entry will be ignored. Parameters are: Group Address, Mask length, RP Address
Recommended Action No special action is required.
Error Message PIM6-6-PIM_LIB_API_FAILED_GET_PCIB: %s failed in %s
Explanation PIM6 client failed in invoking an API. Parameters are: Function Name
Recommended Action No special action is required.
Error Message PIM6-6-PIM_LIB_API_FAILED_GET_RP: %s failed in %s
Explanation PIM6 client failed in invoking an API. Parameters are: Function Name
Recommended Action No special action is required.
Error Message PIM6-6-RESERVE_LIMIT_WARNING: Exceeded 80 percent of the reserve-limit for VRF %s
Explanation Exceeded 80 percent of the reserve-limit for VRF. Parameters are: VRF
Recommended Action No special action is required.
Error Message PIM6-6-RESTART_SHUTDOWN: PIM6 shutting self down via restart command
Explanation PIM6 process is shutting itself down due to the restartcommand.
Recommended Action No special action is required.
Error Message PIM6-6-ROUTE_LOOKUP: Couldn't find PIM6 route %s in %s
Explanation PIM6 failed to find entry in the local route-table. Parameters are: Address, Function Name
Recommended Action No special action is required.
Error Message PIM6-6-SHM_RESTART_REASON: PIM6 process has restarted, restart reason: %s\n
Explanation PIM6 is restoring the routes it had added in previous instance. Parameters are: Restart Reason
Recommended Action No special action is required.
Error Message PIM6-6-SHUTDOWN_SELF: PIM6 shutting self down
Explanation PIM6 process is shutting itself down.
Recommended Action No special action is required.
Error Message PIM6-6-SHUTDOWN: Shutting down PIM6 process
Explanation PIM6 received a shutdown request.
Recommended Action No special action is required.
Error Message PIM6-6-STATE_LIMIT_WARNING: Exceeded 80 percent of the state-limit for VRF %s
Explanation Exceeded 80 percent of the state-limit for VRF. Parameters are: VRF
Recommended Action No special action is required.
Error Message PIM6-6-UNKNOWN_OPC: Received unknown mts opcode %d
Explanation PIM6 process received unknown Interprocess message, dropped. Parameters are: MTS Opcode
Recommended Action No special action is required.
This section contains the PMALLOC messages.
Error Message PMALLOC-3-BITMAP_MEM_CHECK: Failed to allocate bitmap for memory checking in %s\n
Explanation In PMALLOC lib, process failed to allocate bitmap for memory checking. Parameters are: Function name
Recommended Action No special action is required.
Error Message PMALLOC-3-MALLOC_ENABLE_CHECKER_INFO: %d bytes already allocated\n
Explanation In PMALLOC lib, warn if some bytes have already been allocated. Parameters are: Number of bytes
Recommended Action No special action is required.
Error Message PMALLOC-3-MALLOC_ENABLE_CHECKER: Malloc enable checker failed in %s\n
Explanation In PMALLOC lib, process failed to turn on memory accesses. Parameters are: Function name
Recommended Action No special action is required.
Error Message PMALLOC-3-MALLOC_FAILURE: Malloc failure in %s\n
Explanation In PMALLOC lib, Malloc failed. Parameters are: Function name
Recommended Action No special action is required.
Error Message PMALLOC-3-NOT_ALLOCATED_SM_MALLOC_STR: %s failed in %s\n
Explanation In PMALLOC lib, invalid memory block/excess block request. Parameters are: Function name,Function name
Recommended Action No special action is required.
Error Message PMALLOC-3-SEGMENT_NOT_INIT: Segment 0x%p not initialized for memory checking\n
Explanation In PMALLOC lib, segment is not initialized for memory checking. Parameters are: Shared memory segment
Recommended Action No special action is required.
Error Message PMALLOC-3-SM_INIT_CHECKING: %s failed in %s\n
Explanation In PMALLOC lib, function failed to initialized. Parameters are: Function name,Function name
Recommended Action No special action is required.
Error Message PMALLOC-6-BLOCKED_MEMSEG_MUTEX: Blocked for memseg_mutex\n
Explanation In PMALLOC lib, process is blocked for memseg_mutex.
Recommended Action No special action is required.
Error Message PMALLOC-6-LARGE_MEM: Large mem: shared %d\n
Explanation In PMALLOC lib, large memory requested. Parameters are: Shared memory segment
Recommended Action No special action is required.
Error Message PMALLOC-6-MMAP_SIZE: MMAP size is: %d\n
Explanation In PMALLOC lib, Memory map size. Parameters are: Memory Map size
Recommended Action No special action is required.
Error Message PMALLOC-6-SBRK_FAILURE: sbrk failed in %s\n
Explanation In PMALLOC lib, return vlaue from MORECORE failed. Parameters are: Function name
Recommended Action No special action is required.
This section contains the PT messages.
Error Message PT-4-PT_WARNING: %s
Explanation Patricia Tree API warning.
Recommended Action No special action is required.
This section contains the PWE messages.
Error Message PWE-2-ERROR: %s
Explanation As self-explained by the message itself.
Recommended Action Restart component.
Error Message PWE-2-FAILURE_LXC_ADD: add create-lxc to ipc txlist for iod %d and %d\n
Explanation As self-explained by the message itself.
Recommended Action Restart component.
Error Message PWE-2-FAILURE_THREAD: Failed to create %.20s - %d
Explanation As self-explained by the message itself.
Recommended Action Restart component.
Error Message PWE-2-FAILURE_TOLERANT: Failed to %s
Explanation System errors as self-explained by the message itself.
Recommended Action Keep running, do nothing special.
Error Message PWE-2-FAILURE: Failed to %s
Explanation As self-explained by the message itself.
Recommended Action Restart component.
Error Message PWE-2-NO_MEM: No memory event detected
Explanation The router did not have enough memory to store certain data structures.
Recommended Action Add more memory to the router.
Error Message PWE-2-NO_SH_MEM: No shared memory available for %s
Explanation Pre-allocated shared memory is not enough for too-large configs.
Recommended Action add more shared memory to pwe.
Error Message PWE-3-CORRUPT_DATA: corrupt data %s
Explanation self-explanatory.
Recommended Action Reload the stack.
Error Message PWE-3-INIT: PWE initialization failed %s
Explanation pwe can't be initialized.
Recommended Action Reload the stack.
Error Message PWE-3-MTS_BIND: Error returned from mts_bind(), errno: %s
Explanation PWE called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message PWE-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation PWE called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message PWE-3-MTS_RECV: Error returned from mts_recv(), errno: %s
Explanation PWE called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message PWE-3-MTS_UNKNOWN_MSG: Unknown error returned from MTS, errno: %d
Explanation PWE called a MTS API which returned an unknown error.
Recommended Action Dump core, then restart component.
Error Message PWE-3-SYSMGR_DISPATCH: Error returned from sysmgr_dispatch(), errno: %s
Explanation PWE called a System Manager API which returned an error.
Recommended Action Dump core, then restart component.
Error Message PWE-6-EXIT_OUT: Exit with status 0x%x
Explanation pwe exits.
Recommended Action No special action is required.
Error Message PWE-6-INFORMATION: %s
Explanation Informational messages as self-explained by the message itself.
Recommended Action No special action is required.
Error Message PWE-6-IP_ADDRESS_NONE: empty IP address for iod %d
Explanation self-explained.
Recommended Action No special action is required.
Error Message PWE-6-SYSMAN_CLEANUP: Terminated by SYSMAN cleanup signal
Explanation pwe has been deconfigured or restarted or killed.
Recommended Action No special action is required.
This section contains the REGEX messages.
Error Message REGEX-3-BACKSLASH: Trailing \\ error in %s\n
Explanation In REGEX lib, trailing backslash error. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-CORRPTD_OPCODE: Corrupted opcode in %s\n
Explanation In REGEX lib, corrupted opcode. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-CORRPTD_PGM: Corrupted program in %s\n
Explanation In REGEX lib, corrupted program. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-CORRPTD_POINTERS: Corrupted pointers in %s\n
Explanation In REGEX lib, corrupted pointers. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-DMG_REGEX: Damaged regexp fed to regsub in %s\n
Explanation In REGEX lib, damaged regexp fed to regsub. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-EXP_TOO_BIG: Expression too big in %s\n
Explanation In REGEX lib, expression too big. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-INTERNAL_URP: Internal urp in %s\n
Explanation In REGEX lib, internal urp error. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-INTR_FOULUP: Internal foulup in %s\n
Explanation In REGEX lib, internal foulup. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-INVALID_BRCKT_RANGE: Invalid [] range in %s\n
Explanation In REGEX lib, invalid [] range. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-INVALID_LENGTH: Invalid character position in %s\n
Explanation In REGEX lib, invalid character position. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-JUNK: Junk characters at the end in %s\n
Explanation In REGEX lib, junk characters at the end. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-MEMORY_CORRUPTION: Memory corruption in %s\n
Explanation In REGEX lib, memory corruption. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-MEMORY_ERR: Not enough memory in %s\n
Explanation In REGEX lib, not enough memory. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-NESTED_SYMBOL: Nested *?+ in %s\n
Explanation In REGEX lib, nested *?+ symbols. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-NULL_PARM_REGSUB: NULL parameter to regsub in %s\n
Explanation In REGEX lib, NULL parameter to regsub. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-NULL_PGM_PARM: Null program parameter %s\n
Explanation In REGEX lib, null program parameter. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-NULL_STR_PARM: NULL string parameter in %s\n
Explanation In REGEX lib, null string parameter. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-OPND_EMPTY: *+ operand could be empty in %s\n
Explanation In REGEX lib, *+ operand could be empty. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-PTTRN_LONG: Pattern substitution too long in %s\n
Explanation In REGEX lib, pattern substitution too long. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-SYMBOL_ERR: ?+* follows nothing in %s\n
Explanation In REGEX lib, symbol error. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-TOO_MANY_PRNTHSIS: Too many paranthesis in %s\n
Explanation In REGEX lib, too many paranthesis. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-UNMATCHED_BRCKT: Unmatched [] in %s\n
Explanation In REGEX lib, unmatched []. Parameters are: Function name
Recommended Action No special action is required.
Error Message REGEX-3-UNMATCHED_PRNTHSIS: Unmatched paranthesis in %s\n
Explanation In REGEX lib, unmatched paranthesis. Parameters are: Function name
Recommended Action No special action is required.
This section contains the RIP messages.
Error Message RIP-2-STARTUP_DEBUG: %s
Explanation A startup debug of rip process RIP process. Parameters are: Event
Recommended Action No special action is required.
Error Message RIP-2-STARTUP_FAILURE: Failed to %s during startup
Explanation A Critical operation has failed during startup of the RIP process. Parameters are: Event
Recommended Action No special action is required.
Error Message RIP-3-AUTH_SEND_FAILURE: %s %s
Explanation The RIP process failed to send a message to a neighbor. Parameters are: Failure Reason, Interface Name
Recommended Action Report the issue to Customer Support.
Error Message RIP-3-FAILURE: Failed to %s
Explanation A Critical operation has failed in the RIP process. Parameters are: Event
Recommended Action Report the issue to Customer Support.
Error Message RIP-3-GENERIC: %s
Explanation An error occured. Parameters are: Error
Recommended Action Report the issue to Customer Support.
Error Message RIP-3-IM_DEL: IOD in IM delete message for %s (%d) mismatches with RIP interface %p (iod %d)
Explanation There is a mismatch of interface IODs in IM and RIP. Parameters are: Interface Name, Interface ID, Interface Name, Interface ID
Recommended Action Report the issue to Customer Support.
Error Message RIP-3-INTERNAL_ERROR: %s
Explanation An internal error has occured in the RIP process. Parameters are: Error
Recommended Action Report the issue to Customer Support.
Error Message RIP-3-MQ_RCVD: %s thread - message queue receive failure (%d)
Explanation An error occured while trying to receive a message from another process. Parameters are: Thread Name, Failure Reason
Recommended Action Report the issue to Customer Support.
Error Message RIP-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation RIP called a MTS API which returned an error. Parameters are: Error Number
Recommended Action No special action is required.
Error Message RIP-3-MTS_RECV: Error returned from mts_recv(), errno: %s
Explanation RIP called a MTS API which returned an error. Parameters are: Error Number
Recommended Action No special action is required.
Error Message RIP-3-POLICY_ERROR: %s
Explanation An error has occured when processing policies. Parameters are: Error
Recommended Action Report the issue to Customer Support.
Error Message RIP-3-PROCESS_STOP: Process shutting down: %s
Explanation RIP called a sysmgr API which returned an error. Parameters are: Stop Reason
Recommended Action No special action is required.
Error Message RIP-3-SEND_FAILURE: Failed to send message. %s
Explanation The RIP process failed to send a message to a neighbor. Parameters are: Failure Reason
Recommended Action Report the issue to Customer Support.
Error Message RIP-3-SYSMGR_CLEANUP: Error returned from sysmgrcb_conditional_srv_cleanup_status(): %d
Explanation RIP called a sysmgr API which returned an error. Parameters are: Status
Recommended Action No special action is required.
Error Message RIP-3-UNK_MSG_MAJOR: %s thread - Unrecognized message major type %d
Explanation An unknown message was received from another process. Parameters are: Thread Name, Major Type
Recommended Action Report the issue to Customer Support.
Error Message RIP-3-UNK_MSG_MINOR: %s thread - Unrecognized message minor type %d
Explanation An unknown message (minor) was received from another process. Parameters are: Thread Name, Minor Type
Recommended Action Report the issue to Customer Support.
Error Message RIP-4-IF_DOWN_OVERLOAD: Interface %s brought down due to overload condition for %s af
Explanation The interface has been brought down due to an overload condition. Parameters are: Interface Name, Address Family
Recommended Action Report the issue to Customer Support.
Error Message RIP-4-NO_MEM: Failed to allocate private memory
Explanation The RIP process has run out of private memory.
Recommended Action Report the issue to Customer Support.
Error Message RIP-4-VALIDATE_ENTRY: %s
Explanation A route entry in an incoming response packet is invalid. Parameters are: Error
Recommended Action No special action is required.
Error Message RIP-4-VALIDATE_SRC: %s %s
Explanation An incoming packet has failed validation. Parameters are: Failure Reason, Interface Name
Recommended Action No special action is required.
Error Message RIP-5-TOO_BIG_KEY_SIZE: Authentication key %s is > 16 characters in keychain %s
Explanation Authentication key size is > 16 characters. Parameters are: Authentication Key, Keychain Name
Recommended Action Report the issue to Customer Support.
Error Message RIP-5-U6RIB_API_FAILURE: Failed to %s routes %s U6RIB
Explanation An API call to U6RIB has failed. Parameters are: Event, To/From
Recommended Action Report the issue to Customer Support.
Error Message RIP-5-URIB_API_FAILURE: Failed to %s routes %s URIB
Explanation An API call to URIB has failed. Parameters are: Event, To/From
Recommended Action Report the issue to Customer Support.
Error Message RIP-6-MTS_UNKNOWN_MSG: Received unknown MTS message with opcde %d, dropping it
Explanation RIP recieved an unknown message. The message is dropped. Parameters are: Opcode
Recommended Action No special action is required.
Error Message RIP-6-SYSMAN_CLEANUP: Terminated by SYSMAN cleanup signal
Explanation System Manager sent a cleanup signal to RIP to exit the process.
Recommended Action No special action is required.
Error Message RIP-6-UNK_DEB_FLAG: Ignore unrecognized debug flag \%s\
Explanation An unknown command line debug option was entered. Parameters are: Debug Flag
Recommended Action No special action is required.
This section contains the RPM messages.
Error Message RPM-2-LIB_MALLOC_FAILED: malloc() failed for allocating %s in %s()
Explanation RPM API library is out of heap memory. Parameters are: Data, RPM Function
Recommended Action Reload the stack.
Error Message RPM-2-MALLOC_FAILED: malloc() failed for allocating %s in %s()
Explanation RPM process is out of heap memory. Parameters are: Data, RPM Function
Recommended Action Reload the stack.
Error Message RPM-2-PPF_SES_ABORT: PPF session abort failed in client %s with an error 0x%08x(%s)
Explanation RPM encountered an error during PPF abort operation. Parameters are: PPF-Client, Error code, Error message
Recommended Action Reboot router.
Error Message RPM-2-PPF_SES_COMMIT: PPF session commit failed in client %s with an error 0x%08x(%s)
Explanation RPM encountered a serious error while committing the verified PBR policy changes to PBR clients. Parameters are: PPF-Client, Error code, Error message
Recommended Action Reboot router.
Error Message RPM-2-PPF_SES_RQST: PPF session request failed in client %s with an error 0x%08x(%s)
Explanation RPM encountered an error while requesting PBR statistics from PBR clients. Parameters are: PPF-Client, Error code, Error message
Recommended Action Report the issue to Customer Support.
Error Message RPM-2-PPF_SES_VERIFY: PPF session verify failed in client %s with an error 0x%08x(%s)
Explanation RPM encountered an error while pushing PBR policy changes during the verify stage to PBR clients. Parameters are: PPF-Client, Error code, Error message
Recommended Action Report the issue to Customer Support.
Error Message RPM-2-PSS_SYNC_BUFFER: Crossed pss sync buffer size limit of %d with payload size %d - in %s()
Explanation RPM tried to PSS sync a message exceeding the maximum allowed size. Parameters are: Pss sync buffer size, Message payload size, RPM Function
Recommended Action No special action is required.
Error Message RPM-2-PTHREAD: %s failed with error - %d in %s()
Explanation RPM_UNEXPECTED_EXPLANATION. Parameters are: Failed Function, Error Code, RPM Function
Recommended Action Keep running, do nothing special.
Error Message RPM-2-SLAB_ALLOC_FAILED: slab_alloc() failed for allocating %s in %s()
Explanation RPM process is out of shared memory. This could be due to temporary increase in the number of policies configured to a very high value. Parameters are: Data, RPM Function
Recommended Action Reload the stack.
Error Message RPM-2-SMALLOC_FAILED: smalloc() failed for allocating %s in %s()
Explanation RPM process is out of shared memory. This could be due to temporary increase in the number of policies configured to a very high value. Parameters are: Data, RPM Function
Recommended Action
Error Message RPM-2-SRV_INIT_API_FAIL: %s failed during initialization in %s()
Explanation RPM called a server API during initialization which returned an error. Parameters are: Init Function, RPM Function
Recommended Action Reboot router.
Error Message RPM-3-API_FAILED_NUM: %s - failed for %d in %s()
Explanation RPM invoked an API which failed. This is an unexpected but manageable event.). Parameters are: Failed API, Number, RPM Function
Recommended Action Keep running, do nothing special.
Error Message RPM-3-API_FAILED_STR_NUM: %s - failed for %s %d in %s()
Explanation RPM invoked an API which failed. This is an unexpected but manageable event.). Parameters are: Failed API, String, Number, RPM Function
Recommended Action Keep running, do nothing special.
Error Message RPM-3-API_FAILED_STR_STR: %s - failed for %s %s in %s()
Explanation RPM invoked an API which failed. This is an unexpected but manageable event.). Parameters are: Failed API, String1, String2, RPM Function
Recommended Action Keep running, do nothing special.
Error Message RPM-3-API_FAILED_STR: %s - failed for %s in %s()
Explanation RPM invoked an API which failed. This is an unexpected but manageable event.). Parameters are: Failed API, String1, RPM Function
Recommended Action Keep running, do nothing special.
Error Message RPM-3-API_FAILED: %s - failed in %s()
Explanation RPM invoked an API which failed. This is an unexpected but manageable event.). Parameters are: Failed API, RPM Function
Recommended Action Keep running, do nothing special.
Error Message RPM-3-BUILD_LIC_REQ: %s failed with error - %s (0x%08x) - in %s()
Explanation API failed to build a license request to recheckout a license. Parameters are: Failed API, Error, Error Code, RPM Function
Recommended Action Report the issue to Customer Support.
Error Message RPM-3-INFRA_SYSERR: %s failed with error - %s (0x%08x) - in %s()
Explanation RPM called an infra API which returned an error. Parameters are: Failed Function, Error, Error Code, RPM Function
Recommended Action Report the issue to Customer Support.
Error Message RPM-3-INT_ERROR: %s
Explanation RPM encountered an error during internal processing. Parameters are: Error, RPM Function
Recommended Action Report the issue to Customer Support.
Error Message RPM-3-ISSU_PREUPG_FAILED: ISSU Preupgrade failed
Explanation Please remove the incompatible RPM/PBR config and restart ISSU.
Recommended Action Keep running, do nothing special.
Error Message RPM-3-LIB_API_FAILED_NUM_NUM: %s - failed for %d %d in %s()
Explanation RPM invoked an API which failed. This is an unexpected but manageable event.). Parameters are: Failed API, Number1, Number2, RPM Function
Recommended Action Keep running, do nothing special.
Error Message RPM-3-LIB_API_FAILED_NUM: %s - failed for %d in %s()
Explanation RPM invoked an API which failed. This is an unexpected but manageable event.). Parameters are: Failed API, Number, RPM Function
Recommended Action Keep running, do nothing special.
Error Message RPM-3-LIB_API_FAILED_STR: %s - failed for %s in %s()
Explanation RPM invoked an API which failed. This is an unexpected but manageable event.). Parameters are: Failed API, String1, RPM Function
Recommended Action Keep running, do nothing special.
Error Message RPM-3-LIB_API_FAILED: %s - failed in %s()
Explanation RPM invoked an API which failed. This is an unexpected but manageable event.). Parameters are: Failed API, RPM Function
Recommended Action Keep running, do nothing special.
Error Message RPM-3-LIB_INT_ERROR: %s in %s()
Explanation RPM API encountered an error during internal processing. Parameters are: Error, RPM Function
Recommended Action Report the issue to Customer Support.
Error Message RPM-3-LIB_KEYCHAIN: Unexpected keychain result :%s
Explanation Unexpected result during RPM keychain API processing. Parameters are: Keychain Result
Recommended Action Keep running, do nothing special.
Error Message RPM-3-LIB_MTS_SEND: Error returned from mts_send(), errno: %s in %s()
Explanation An MTS API returned an error while RPM was sending an MTS message. Parameters are: Error, RPM Function
Recommended Action Keep running, do nothing special.
Error Message RPM-3-LIC_CHECKIN_FAILED: %s failed with error - %s (0x%08x) - in %s()
Explanation Licensing API failed to check in a license. Parameters are: Failed API, Error, Error Code, RPM Function
Recommended Action Report the issue to Customer Support.
Error Message RPM-3-LIC_CHECKOUT_FAILED: %s failed with error - %s (0x%08x) - in %s()
Explanation Licensing API failed to check out a license. Parameters are: Failed API, Error, Error Code, RPM Function
Recommended Action Report the issue to Customer Support.
Error Message RPM-3-LIC_REG_FAILED: %s failed with error - %s (0x%08x) - in %s()
Explanation Licensing API failed while registering for license change notifications. Parameters are: Failed API, Error, Error Code, RPM Function
Recommended Action Report the issue to Customer Support.
Error Message RPM-3-LOAD_PARSE_TREE: %s failed with error - %s (0x%08x) - in %s()
Explanation API failed to load parse tree for PBR commands. Parameters are: Failed API, Error, Error Code, RPM Function
Recommended Action Report the issue to Customer Support.
Error Message RPM-3-MTS_DROP: Error returned from mts_drop(), errno: %s (0x%08x) in %s()
Explanation An MTS API returned an error when RPM tried to drop a message. Parameters are: Error, Error Code, RPM Function
Recommended Action Keep running, do nothing special.
Error Message RPM-3-MTS_RECV: Error returned from tsp_mts_recv(), errno: %s (0x%08x) in %s()
Explanation An MTS API returned an error while RPM was receiving on an MTS queue. Parameters are: Error, Error Code, RPM Function
Recommended Action Keep running, do nothing special.
Error Message RPM-3-MTS_SEND: Error returned from mts_send(), errno: %s (0x%08x) in %s()
Explanation An MTS API returned an error while RPM was sending an MTS message. Parameters are: Error, Error Code, RPM Function
Recommended Action Keep running, do nothing special.
Error Message RPM-3-RPMLIB_API_TIMEOUT: %s - timed out in %s()
Explanation An API call from RPM timed. Parameters are: Timed out API, RPM Function
Recommended Action Requires operator to intervene.
Error Message RPM-3-UNLOAD_PARSE_TREE: %s failed with error - %s (0x%08x) - in %s()
Explanation API failed to unload parse tree for PBR commands. Parameters are: Failed API, Error, Error Code, RPM Function
Recommended Action Report the issue to Customer Support.
Error Message RPM-6-INT_TYPE6: %s
Explanation RPM process is not able to provide default type-6 key. Parameters are: RPM Function
Recommended Action No special action is required.
Error Message RPM-6-LIB_MATCH_IGNORED: The command %s in seq. %u of route-map %s is ignored in %s()
Explanation A route-map match command has been ignored. Parameters are: Match Command, Seq No, Route-map, RPM Function
Recommended Action Keep running, do nothing special.
Error Message RPM-6-MTS_UNKNOWN_MSG: Received unknown MTS message with opcode %d, dropping it in %s()
Explanation RPM received an unknown message. The message is dropped. Parameters are: MTS Opcode, RPM Function
Recommended Action Keep running, do nothing special.
Error Message RPM-6-RESTART_SHUTDOWN: RPM shutting self down via restart command in %s()
Explanation RPM process is shutting itself down due to the restartcommand. Parameters are: RPM Function
Recommended Action No special action is required.
This section contains the RSVP messages.
Error Message RSVP-1-LSP_RESOURCE_EXHAUSTED: Failed to get a new LSP resource: %u/%u
Explanation The router did not have enough memory to store mentioned data structures. Parameters are: Handle count, Handle bin count
Recommended Action Out of memory. Add more memory to the router.
Error Message RSVP-1-NOMEM: Malloc (%ld bytes) failed for: %s
Explanation The router did not have enough memory to store mentioned data structures. Parameters are: Size, Error
Recommended Action Out of memory. Add more memory to the router.
Error Message RSVP-2-RUNTIME_INIT_FAIL: Unexpected runtime initialization failure: %s [%s]
Explanation An unexpected software error has occurred while initializing a sub-component. Parameters are: Reason, Reason Qualification (if known)
Recommended Action Restart component.
Error Message RSVP-2-STARTUP_FAILURE: %s-%s %s startup failure: %s
Explanation An unrecoverable software error has occurred during RSVP startup. Parameters are: Supervisor State, Start Type, Error Location, Error Details
Recommended Action Kill component and don't restart it.
Error Message RSVP-3-MISSING_PFC: PFC not found for PSB %s
Explanation Unexpectedly, PFC data corresponding to a PSB wasn't found. Parameters are: PSB info
Recommended Action No special action is required.
Error Message RSVP-3-NO_HELLO_INST: %s: There was no corresponding hello instance found for HC nbr %s
Explanation RSVP Hello was unable to find an instance corresponding to a hello neighbor. Parameters are: Function name, Neighbor IP
Recommended Action No special action is required.
Error Message RSVP-3-SYSMGR_MTS_ERR: Failed %s: %s
Explanation Error processing peer message. Parameters are: Error Reason, Error Details
Recommended Action Keep running, do nothing special.
Error Message RSVP-3-UNK_MTS_OPC: %s thread - Unrecognized MTS opcode %d
Explanation UNEXPECTED_EXPLANATION. Parameters are: Thread Name, MTS Opcode
Recommended Action Keep running, do nothing special.
Error Message RSVP-6-ERROR_PROC: Internal Error: %s %s %d
Explanation Internal error while invoking procedure. Parameters are: Procedure name
Recommended Action No special action is required.
Error Message RSVP-6-INVALID_PARAM: Invalid parameters passed to %s
Explanation RSVP function called with invalid parameters. Parameters are: Function name
Recommended Action No special action is required.
Error Message RSVP-6-SDWRAP_DEBUG_LOG_INIT: Failed %s: %s
Explanation RSVP could not initialize debug and logging facility. Parameters are: Error Reason
Recommended Action No special action is required.
Error Message RSVP-6-SHUTDOWN_FAILURE: Shutdown failure. Failed to %s - %s
Explanation RSVP request to system manager for permission to shutdown was declined. Parameters are: Reason, Reason Code
Recommended Action No special action is required.
Error Message RSVP-6-SHUTDOWN: %s
Explanation Message to indicate RSVP shutdown. Parameters are: Shutdown Reason
Recommended Action No special action is required.
Error Message RSVP-6-STARTUP: Supervisor: %s, Start-type: %s, RSVP-State: %s, Sysmgr-Restart: %s
Explanation Message to indicate rsvp startup. Parameters are: Supervisor State, Start Type, State, Sysmgr-Restart
Recommended Action No special action is required.
This section contains the SLAB_LIB messages.
Error Message SLAB_LIB-2-SLAB_ELEM_ERR: Slab element Alloc PC: %p, Element index: %d
Explanation An error occured in a call to the slab library.
Recommended Action No special action is required.
Error Message SLAB_LIB-3-SLAB_ERR: Slab error [%s] in %s
Explanation An error occured in a call to the slab library.
Recommended Action No special action is required.
This section contains the SMM messages.
Error Message SMM-0-SM_CREATE_ORIG_VAL: %s with the %u value failed. Retrying with the lower value %u size
Explanation SMM could not create requested size, trying for a create for alower size succeeded. Parameters are: Function name, Original requested size, Lower size being retried
Recommended Action No special action is required.
Error Message SMM-0-SM_RECREATE_LOW_VAL: Reallocate with new value %u bytes (%u MB) failed, but we were able to allocate a segment with a lower value.
Explanation SMM could not recreate requested size, but create for a lower size succeeded. Parameters are: SHM size bytes, SHM size MB
Recommended Action No special action is required.
Error Message SMM-2-SAME_REGION: Same region allocated on recreate request, from addr %p with size %d
Explanation A client requested for a new region to be created, but got the same region back. Parameters are: memory address, size
Recommended Action No special action is required.
Error Message SMM-2-SM_API_FAILED: %s failed in %s() with error \%s\ for SHM size %u bytes (%u MB). Trying to allocate shared memory with lower value now.
Explanation SMM could not recreate a shared-memory segment. Parameters are: SMM API, Function name, Error, SHM size bytes, SHM size in MB
Recommended Action No special action is required.
Error Message SMM-3-API_FAILED: %s failed in %s
Explanation Component API call failed in SMM. Parameters are: API name, Function name
Recommended Action No special action is required.
Error Message SMM-3-API_MTS_FAILED: %s failed in %s, errno: %s
Explanation SMM failed using the MTS API. Parameters are: API name, function name, Error number
Recommended Action No special action is required.
Error Message SMM-3-API_SM_FAILED: Could not allocate shared-memory segment. %s failed in %s with error %s
Explanation SMM process could not allocate shared-memory. Parameters are: SMM API, Function name, Error
Recommended Action No special action is required.
Error Message SMM-3-BAD_API_PARAM: %s API failed because %s
Explanation Illegal arguments were provided for an SMM API. Parameters are: API name, reason
Recommended Action Restart component.
Error Message SMM-3-BAD_SEG_TYPE: SMM API %s failed for %s, %s shared memory segment expected
Explanation Incorrect SMM API called for the type (static/dynamic) shared memory segment. Parameters are: SMM API, Segment name, Segment type
Recommended Action No special action is required.
Error Message SMM-3-FTRUNCATE_FAILED: %s failed in %s with error %s
Explanation SMM could not truncate process memory segment. Parameters are: SM API, Function name, Error
Recommended Action No special action is required.
Error Message SMM-3-GET_SHM_INFO_FAILED: Failed to get SHM info in function %s with error: %s
Explanation Failed to get SHM information. Parameters are: Function name, Error
Recommended Action No special action is required.
Error Message SMM-3-GETRLIMIT_FAILED: Getrlimit failed in %s, reason %s
Explanation SMM API could not set memory resource limit for a client. Parameters are: Function name, Error string
Recommended Action Restart component.
Error Message SMM-3-HA_FAILED: SMM HA:%s
Explanation SMM process restart recovery has succeeded / failed. Parameters are: Reason string
Recommended Action No special action is required.
Error Message SMM-3-INVALID_STEP_SIZE: %s: Invalid step sizes specified for dynamic SHM, incr size: %u, decr_size: %u
Explanation Illegal arguments were provided for an SMM API. Parameters are: Function name, Increment step size, Decrement step size
Recommended Action Restart component.
Error Message SMM-3-LSEEK_FAILED: Failed to seek to offset %u for file %s
Explanation Lseek operation on a shared memory file failed. Parameters are: Address, Segment name
Recommended Action No special action is required.
Error Message SMM-3-MALLOC_FAILED: %s failed in %s
Explanation SMM process is out of free memory. Parameters are: API name, Function name
Recommended Action No special action is required.
Error Message SMM-3-MEMORY_API_ERROR: %s failed in %s with error %s
Explanation Memory API failed. Parameters are: SM API, Function name, Error
Recommended Action No special action is required.
Error Message SMM-3-MMAP_FAILED: %s failed in %s with error %s for segment %s. Requested map from %p for size %d
Explanation MMAP failed. Parameters are: SM API, Function name, Error
Recommended Action No special action is required.
Error Message SMM-3-MQ_FAILED: %s failed in %s, errno: %s
Explanation SMM failed to access message-queue resource. Parameters are: API name, function name, Error number
Recommended Action No special action is required.
Error Message SMM-3-MTS_DROP: Error returned from mts_drop()
Explanation SMM called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message SMM-3-MTS_FAILED: %s failed in %s, errno: %s
Explanation SMM failed using the MTS API. Parameters are: API name, function name, Error number
Recommended Action No special action is required.
Error Message SMM-3-MTS_RECV: Error returned from mts_recv()
Explanation SMM called a MTS API which returned an error.
Recommended Action Dump core, then restart component.
Error Message SMM-3-NO_REGION: No corresponding region found for segment %s
Explanation SMM library could not find a the region data structure which corresponds to each shared memory segment. Parameters are: Segment name
Recommended Action No special action is required.
Error Message SMM-3-PSS_REPORT: SMM HA:%s
Explanation Persistent DB reports for SMM. Parameters are: Reason string
Recommended Action No special action is required.
Error Message SMM-3-PTHREAD_FAILED: %s failed for %s in %s
Explanation SMM process failed to create a task thread. Parameters are: API name, function name, Error number
Recommended Action Dump core, then reload the stack.
Error Message SMM-3-REFCOUNT_ERR: %s: Refcount of shared memory segment %s is %d, expected refcount %d
Explanation There are more/less readers of the same shared memory segment than expected for the API to succeed.
Recommended Action No special action is required.
Error Message SMM-3-REGION_FAILED: Failed to create SMM region %s
Explanation SMM API failed in %s to create a region %s for the shared memory this client is trying to open. Parameters are: Function name, Region name
Recommended Action Restart component.
Error Message SMM-3-SETRLIMIT_FAILED: Address space size increment of %d failed in %s, reason %s
Explanation SMM API could not set memory resource limit for a client. Parameters are: Number of bytes, Function name, Error string
Recommended Action No special action is required.
Error Message SMM-3-SHM_CLEANUP_FAILED: Failed to cleanup SHM info for %s in %s with error: %s
Explanation Failed to cleanup shared memory for recreate API. Parameters are: SHM name, Function Name, Error string
Recommended Action No special action is required.
Error Message SMM-3-SM_CREATE_FAILED: Failed to create %s shared memory segment %s of size %d (max %d)
Explanation SMM failed to create a shared memory segment. Parameters are: SHM type, SHM name, SHM size, Max size for dynamic SHM
Recommended Action Restart component.
Error Message SMM-3-SM_FAILED: Could not allocate shared-memory segment
Explanation SMM process could not allocate shared-memory.
Recommended Action No special action is required.
Error Message SMM-3-SM_GET_NEW_REGION_FAILED: Failed to get shared memory region for %s of size %d
Explanation SMM failed to get a new region of the requested size. Parameters are: SHM name, size
Recommended Action Restart component.
Error Message SMM-3-SM_INFO_FOR_SMM: Received request %s for SMM's segment, unexpected
Explanation SMM received a request to open its own shared memory segment. Parameters are: API name
Recommended Action No special action is required.
Error Message SMM-3-SM_OPEN_FAILED: %s failed in %s with error %s
Explanation SMM could not open a shared-memory segment. Parameters are: SM API, Function name, Error
Recommended Action No special action is required.
Error Message SMM-3-SMM_API_FAILED: %s failed in %s
Explanation Component API call failed in SMM. Parameters are: API name, Function name
Recommended Action No special action is required.
Error Message SMM-3-SYSMGR_DISPATCH: Error returned from sysmgr_dispatch()
Explanation SMM called a System Manager API which returned an error.
Recommended Action Dump core, then restart component.
Error Message SMM-3-TIMER_FAILED: active_timer_create() failed in %s for %s timer
Explanation SMM failed to initialize timer resource. Parameters are: timer type (heap/wheel)
Recommended Action Dump core, then restart component.
Error Message SMM-3-TIMER_SET_INIT: Couldn't init %s active timer set
Explanation SMM failed to initialize timer resource. Parameters are: timer type (heap/wheel)
Recommended Action Dump core, then restart component.
Error Message SMM-3-UNKNOWN_SMM_MTYPE: Unknown %s in mtype: %d/%d (major/minor) in %s
Explanation SMM process received unknown Interprocess message, dropped. Parameters are: Major/Minor type, Major number, Minor number, Function name
Recommended Action No special action is required.
Error Message SMM-5-UNKNOWN_OPC: Unknown MTS opcode %d in %s
Explanation UNEXPECTED_EXPLANANTION. Parameters are: MTS opcode, Function name
Recommended Action No special action is required.
Error Message SMM-6-SUP_SWITCHOVER: Received %s SUP switchover message.
Explanation Events related to changing SUP state from standby to active.
Recommended Action No special action is required.
Error Message SMM-6-SUP_SWOVER_DONE: %s
Explanation Events related to changing SUP state from standby to active.
Recommended Action No special action is required.
This section contains the SRTE messages.
Error Message SRTE-1-NOMEM: Malloc (%ld bytes) failed for: %s
Explanation The router did not have enough memory to store mentioned data structures. Parameters are: Size, Error
Recommended Action Out of memory. Add more memory to the router.
Error Message SRTE-3-INIT: %s could not be initialized
Explanation Initialization failed. Check the init specific log.
Recommended Action No special action is required.
Error Message SRTE-3-MALLOC: malloc failed for %s structure
Explanation SRTE could not allocate private memory for a structure.
Recommended Action Keep running, do nothing special.
Error Message SRTE-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation SRTE called aN MTS API which returned an error.
Recommended Action No special action is required.
Error Message SRTE-3-MTS_RECV: Error returned from mts_recv(), errno: %s
Explanation SRTE called an MTS API which returned an error.
Recommended Action No special action is required.
Error Message SRTE-3-REG_COMP: Can't register with %s, %s failed
Explanation Could not register with another component. No communication can take place with the component.Probably the shared memory could not be mapped.
Recommended Action No special action is required.
Error Message SRTE-3-SYSMGR_SRV_QUERY: Query for status of service %s failed
Explanation System manager query for status of a component failed.
Recommended Action No special action is required.
Error Message SRTE-3-TIMER: Could not create %s %s timer
Explanation Timer creation failed. Check timer library statistics.
Recommended Action No special action is required.
Error Message SRTE-6-HA_INFO: SRTE HA info msg - %s
Explanation SRTE received a HA info msg.
Recommended Action No special action is required.
Error Message SRTE-6-HA_TLV: Failed to convert to %s for %s
Explanation SRTE called a TLV intf which returned an error.
Recommended Action No special action is required.
Error Message SRTE-6-MTS_UNKNOWN_MSG: Received unknown MTS message with opcde %d, dropping it
Explanation SRTE received an unknown message. The message was dropped.
Recommended Action No special action is required.
This section contains the SYSLOG_COMP_MRIB messages.
Error Message SYSLOG_COMP_MRIB-2-API_INIT_SEM: Failed to init the client API semaphore: %s, create: %s
Explanation MRIB could not create the semaphore that protects access to the shared memory between MRIB and its clients. Parameters are: Operation, Error from the operation
Recommended Action Reload the stack.
Error Message SYSLOG_COMP_MRIB-2-RES_MGR: Error returned from %s for %d keys, errno: 0x%08x (%s) in %s(). Current reservation is %d, new size is %d
Explanation The resource manager returned an error to MRIB, while MRIBwas performing an action relating to its shared memory. Parameters are: RM Function, Error Code, Error Description, Calling Function, Reserved resources, Reservation requested resources
Recommended Action Reload the stack.
Error Message SYSLOG_COMP_MRIB-2-STARTUP_FAILURE: Startup failure: %s
Explanation An unrecoverable software error has occurred during MRIB startup.
Recommended Action Reload the stack.
Error Message SYSLOG_COMP_MRIB-3-ACTIVE_TIMER_FAILED: active_timer_create() failed for mrib_main()
Explanation MRIB process failed to create a timer.
Recommended Action Dump core, then reload the stack.
Error Message SYSLOG_COMP_MRIB-3-API_FAILED: %s failed
Explanation MRIB process failed in invoking an API. Parameters are: Function
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-BITFIELD_FAILED: %s failed in %s
Explanation MRIB process could not execute the bitfield operation. Parameters are: Bitfield Operation, Function Name
Recommended Action Dump core, then reload the stack.
Error Message SYSLOG_COMP_MRIB-3-CONF_CHECK: Failed to %s MRIB confcheck capability with error: %s
Explanation MRIB failed to update config check capability in the system. Parameters are: error type
Recommended Action ACTION_SW_KEEP_RUNNING.
Error Message SYSLOG_COMP_MRIB-3-CONTEXT_BF_FAILED: bitfield_create() failed for context %s
Explanation MRIB process failed to create a bitfield for mrib_cibtype. Parameters are: Context Name
Recommended Action Dump core, then reload the stack.
Error Message SYSLOG_COMP_MRIB-3-CV_INIT: Couldn't init cond var %s
Explanation MRIB process failed to initialize conditional-variable resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message SYSLOG_COMP_MRIB-3-FTM_BAD_METER: %s failed for meter %s in %s
Explanation MRIB process failed to configure the multicast meter. Parameters are: FTM Operation, Type, Function
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-FTM_BAD_MINOR: Unknown FTM mtype: 0x%4x
Explanation MRIB process received unsupported message type from FTM, ignored. Parameters are: Minor Type
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-FTM_NO_XID: Cannot find FTM buffer, xid: %d
Explanation MRIB process could not match the sequence number for FTM message, ignored. Parameters are: Trasaction ID
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-INHERIT_FAILED: mrib_inherit_oifs(): bitfield is set but oif doesn't exist
Explanation MRIB process failed in inheriting OIFs for the (S,G) from (*,G).
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-INIT_SDB: %s Return Code: 0x%x Error String: %s
Explanation SDB initialization failed. Parameters are: MessageReturn CodeError String
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-INVALID_GROUP: Operation for invalid group %s received in %s
Explanation MRIB process received invalid group. Parameters are: Group, Function
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-KSINK_LIB_ERROR: %s %s
Explanation A severe error was encountered during ksink operations. Parameters are: Error Description, MRIB Function
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-LIB_API_FAILED: %s failed in %s
Explanation Process failed in invoking an API. Parameters are: API Call, Function
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-LIB_DUP_REGISTER: mrib_register(): duplicate register by \%s\
Explanation Dupilcate registration request to the MRIB process, ignored. Parameters are: PIB Name
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-LIB_MTS_FAILED: %s failed in %s, errno: %s, for %s
Explanation Failure in MRIB library to access mts-queue. Parameters are: MTS Operation, Function, errno, MTS Queue
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-LIB_SEM_INVALID: %s:%d: semaphore invalid in %s
Explanation MRIB semaphore was found to be invalid when performing a semaphore operation. Parameters are: Function Name, Line
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-LIB_SEM_OP: %s:%d: semaphore operation %s failed
Explanation Caller failed to get perform an operation on the MRIB semaphore. Parameters are: Function Name, Line
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-LIB_SM_FAILED: %s failed to access MRIB shared memory in %s, errno: %s
Explanation Process failed to access the System shared memory resource. Parameters are: SM Operation, Function, errno
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-MALLOC_FAILED: %s failed for %s
Explanation MRIB process is out of free memory. Parameters are: Alloc Routine, Structure Name
Recommended Action Configure the network or router to decrease the number of routes.
Error Message SYSLOG_COMP_MRIB-3-MDT_API_FAILED: %s failed in %s
Explanation MRIB process failed in invoking an API. Parameters are: API, Function
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-MFDM_NO_BUF: Cannot find MFDM buffer from route-ack for context %s, table-id 0x%08lx
Explanation MRIB process could not find a route buffer in it's queue from the MFDM message, ignored. Parameters are: Context Name, table id of the VRF
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-MQ_FAILED: %s failed in %s, errno: %s, for %s
Explanation MRIB process failed to access the message-queue.
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-MRIB_ALREADY_UP: mrib already running, exiting
Explanation Another MRIB process is already running, this process will shutdown.
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-MTS_BIND: Error returned from mts_bind() for %s mts queue, errno: %s
Explanation MRIB called a MTS API which returned an error. Parameters are: Queue Name, errno
Recommended Action Dump core, then restart component.
Error Message SYSLOG_COMP_MRIB-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation MRIB called a MTS API which returned an error. Parameters are: errno
Recommended Action Dump core, then restart component.
Error Message SYSLOG_COMP_MRIB-3-MTS_FAILED: %s failed in %s, errno: %s, for %s
Explanation MRIB process failed to access the mts-queue. Parameters are: MTS Operation, Function, errno, MTS Queue
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-MTS_NO_PAYLOAD_ERROR: Received MTS message with no payload on %s queue with opcode %d, dropping it
Explanation MRIB recieved an unknown message. The message is dropped.
Recommended Action Keep running, do nothing special.
Error Message SYSLOG_COMP_MRIB-3-MTS_RECV: Error returned from mts_recv(), errno: %s
Explanation MRIB called a MTS API which returned an error. Parameters are: errno
Recommended Action Dump core, then restart component.
Error Message SYSLOG_COMP_MRIB-3-MTS_REGISTER: Error returned from mts_register() for %s opcode, errno: %s
Explanation MRIB called a MTS API which returned an error. Parameters are: Queue Name, errno
Recommended Action Dump core, then restart component.
Error Message SYSLOG_COMP_MRIB-3-MTS_SHORT_MSG_ERROR: Received short (%d < %d) MTS message on %s queue with opcode %d, dropping it
Explanation MRIB recieved an unknown message. The message is dropped.
Recommended Action Keep running, do nothing special.
Error Message SYSLOG_COMP_MRIB-3-MUTEX_INIT: Couldn't init mutex %s
Explanation MRIB process failed to initialize mutex system resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message SYSLOG_COMP_MRIB-3-NO_FREE_GROUP: Unable to free group entry for %s
Explanation MRIB process unable to delete a route-table entry. Parameters are: Group
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-NO_FREE_SOURCE: Unable to free source entry for %s
Explanation MRIB process unable to delete a route-table entry. Parameters are: Source
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-NO_GROUP: Unable to create group entry for %s
Explanation MRIB process unable to create the route entry in its route-table. Parameters are: Group
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-NO_MARKER: Unable to find the txlist marker for VRF:%s for the client: %s
Explanation MRIB failed to find txlist resource. Parameters are: VRF name, client name
Recommended Action ACTION_SW_KEEP_RUNNING.
Error Message SYSLOG_COMP_MRIB-3-NO_MPIB_FOR_ROUTE: Unable to creates mpib entry for %s for mpib %s in VRF %s
Explanation MRIB process unable to create the route entry in its route-table. Parameters are: Address, Protocol Name, VRF Name
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-NO_MPIB: Unable to get mpib index in mrib_register_internal()
Explanation MRIB process cannot register the protocol as it has run out of PIB indices.
Recommended Action Dump core, then reload the stack.
Error Message SYSLOG_COMP_MRIB-3-NO_OIFTYPE: Failed to find mrib_oiftype for given iod: %s
Explanation MRIB failed find the oif type for given iod found in mroute. Parameters are: error type
Recommended Action ACTION_SW_KEEP_RUNNING.
Error Message SYSLOG_COMP_MRIB-3-NO_SET_PRIORITY: Failed to set policy or priority
Explanation MRIB process could not set itself process priority, exiting.
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-NO_SOURCE: Unable to create source entry for %s
Explanation MRIB process unable to create the route entry in its route-table. Parameters are: Source
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-NO_TIMER: Could not create stale timer for \%s\
Explanation MRIB process cannot stale the routes for this procotol. Parameters are: PIB Name
Recommended Action Dump core, then reload the stack.
Error Message SYSLOG_COMP_MRIB-3-NOTIFY_BUF_FAILED: Unable to create notification buffer's for client %s, aborting registration.
Explanation MRIB failed to create notification buffer for a client. Parameters are: client name
Recommended Action ACTION_SW_KEEP_RUNNING.
Error Message SYSLOG_COMP_MRIB-3-OPCODE_REGISTER: %s opcode: 0x%x ErrorString: %s
Explanation Opcode registration failed. Parameters are: MessageReturn CodeError String
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-PSS: Error returned from %s, errno: 0x%08x (%s) in %s()
Explanation MRIB called a PSS API which returned an error. The error reported should be examined for the cause. Parameters are: Failed API, Error Code, Error Description, MRIB Function
Recommended Action ERRMSG.
Error Message SYSLOG_COMP_MRIB-3-PT_FAILED: %s failed in %s
Explanation MRIB process failed to update route-table for this event. Parameters are: PT Operation, Function Name
Recommended Action Dump core, then reload the stack.
Error Message SYSLOG_COMP_MRIB-3-PTHREAD_FAILED: pthread_create() failed for mrib_main()
Explanation MRIB process failed to create a task thread.
Recommended Action Dump core, then reload the stack.
Error Message SYSLOG_COMP_MRIB-3-RDLOCK_ASSERT: %s:%d: Assert, read-lock not acquired
Explanation Caller Failed to get MRIB Shared Memory read lock. Parameters are: Function Name, Line
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-SM_FAILED: %s failed in %s for segment %s, errno: %s
Explanation MRIB process failed to access the System shared memory resource. Parameters are: SM Operation, Function, errno
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-3-SYSMGR_DISPATCH: Error returned from sysmgr_dispatch(), errno: %s
Explanation MRIB called a System Manager API which returned an error. Parameters are: errno
Recommended Action Dump core, then restart component.
Error Message SYSLOG_COMP_MRIB-3-TIMER_FAILED: could not %s
Explanation MRIB process failed to configure a timer event. Parameters are: Message
Recommended Action Dump core, then reload the stack.
Error Message SYSLOG_COMP_MRIB-3-TXLIST_CREATE: Couldn't create txlist for %s in VRF:%s
Explanation MRIB failed to create txlist resource. Parameters are: Data type, The VRF that failure occured in
Recommended Action ACTION_SW_KEEP_RUNNING.
Error Message SYSLOG_COMP_MRIB-3-WRLOCK_ASSERT: %s:%d: Assert, write-lock not acquired
Explanation Caller Failed to get MRIB Shared Memory write lock. Parameters are: Function Name, Line
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-4-MRIB_IPC_ROUTE_TOO_LONG: %s : DF list is beyond supported scale for PIM-BIDIR rp route %s .
Explanation DF list is beyond supported scale to fit into one route buffer. Please reduce the PIM Bidir DF scale.
Recommended Action
Error Message SYSLOG_COMP_MRIB-4-MRIB_MOFRR_CONFIG: Multicast only fast re-route is getting initialized. It may take around a minute to establish the secondary path and to be ready to take over in case of network disruption
Explanation Multicast only fast re-route is getting initialized. It may take around a minute to establish the secondary path and to be ready to take over in case of network disruption.
Recommended Action
Error Message SYSLOG_COMP_MRIB-4-URIB_SM_ADDR_RANGE: URIB Shared addr range no valid for mtype:%d, xid:%ld, cnt:%d
Explanation URIB Shared memory address for notification not valid.
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-5-API_INIT_SEM_CLEAR: Cleared the API semaphore from %d
Explanation The API semaphore was in an unexpected state, and was restored to a correct value. Parameters are: Value of semaphore
Recommended Action Keep running, do nothing special.
Error Message SYSLOG_COMP_MRIB-5-RES_MGR_CHANGE: Changed m4route-mem from (%d, %d) to (%d, %d)
Explanation The requested limit-resource command was adapted to fit the limits in this version. Parameters are: Requested Min, Requested Max, New Min, New Max
Recommended Action Keep running, do nothing special.
Error Message SYSLOG_COMP_MRIB-6-MEMORY_OPTION: memory size must be >= 16MB and <= 2GB
Explanation Invalid memory size specified for MRIB process.
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-6-SHUTDOWN_FAILED: Shutting down of MRIB process failed: %s
Explanation MRIB process is shutting itself down. Parameters are: Error String
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-6-SHUTDOWN: Shutting down MRIB process
Explanation MRIB process is shutting itself down.
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-6-USAGE: Usage: mrib [-h] [-d] [-m
Explanation Usage for starting MRIB process.
Recommended Action No special action is required.
Error Message SYSLOG_COMP_MRIB-7-OBJSTORE: Objstore API %s() failed with error: %d\n
Explanation Objstore API has failed.
Recommended Action Keep running, do nothing special.
This section contains the SYSWRAP_LIB messages.
Error Message SYSWRAP_LIB-2-SYSWRAP_ERR: Error condition in stack: %s tid=%u: %#x bytes left on stack of %#lx bytes
Explanation An error occured in a call to the syswrap library.
Recommended Action No special action is required.
This section contains the TCP messages.
Error Message TCP-2-APICLOSE: %s: Unable to close %s API
Explanation Can't close api.
Recommended Action Reload the stack.
Error Message TCP-2-APIINIT: %s: Unable to initialize %s API
Explanation Can't init api.
Recommended Action Reload the stack.
Error Message TCP-2-ATTACH: %s: Unable to attach to %s
Explanation Can't attach shared memoty.
Recommended Action Reload the stack.
Error Message TCP-2-CLI_CONFCHECK_ADD: TCP MSS capability add failed.
Explanation ip tcp mss
Recommended Action No special action is required.
Error Message TCP-2-CLI_CONFCHECK_DELETE: TCP MSS capability delete failed.
Explanation no ip tcp mss
Recommended Action No special action is required.
Error Message TCP-2-CLIENT_RECOVERY_FAILED: %s: Client recovery %s failed. Please restart process %s.
Explanation Client recovery failed.
Recommended Action Restart component.
Error Message TCP-2-COND_DESTROY: %s: pthread_cond_destroy failed, error %s
Explanation No system resources.
Recommended Action Reload the stack.
Error Message TCP-2-COND_INIT: %s: pthread_cond_init failed, error %s
Explanation No system resources.
Recommended Action Reload the stack.
Error Message TCP-2-COND_WAIT: %s: pthread_cond_wait failed, error %s
Explanation No system resources.
Recommended Action Reload the stack.
Error Message TCP-2-DEREGISTER: %s: Unable to deregister to %s
Explanation Can't deregister with component.
Recommended Action Reload the stack.
Error Message TCP-2-ENQUEUE: %s: Unable to enqueue %s to %s
Explanation Can't insert client structure in client list.
Recommended Action Restart component.
Error Message TCP-2-LARGE_PKT: %s: Packet size greater than 65535 bytes, len %d
Explanation Packet size greater than 65535 bytes.
Recommended Action Restart component.
Error Message TCP-2-MGETHDR: %s: MGETHDR failed, error %s
Explanation No system resources.
Recommended Action Reload the stack.
Error Message TCP-2-MISMATCH_LEN: %s: Mismatch in mbuf len (%d) and IP len (%d)
Explanation Mismatch in mbuf len and IP len.
Recommended Action Restart component.
Error Message TCP-2-MPREPEND: %s: m_prepend failed for connection, L: %s.%d, F: %s.%d, error %s
Explanation No system resources.
Recommended Action Reload the stack.
Error Message TCP-2-MPULLUP: %s: m_pullup failed for %s, error %s
Explanation No system resources.
Recommended Action Reload the stack.
Error Message TCP-2-MTS_BIND: %s: Unable to bind to %s mts queue: %s
Explanation TCP called a MTS API which returned an error.
Recommended Action Reload the stack.
Error Message TCP-2-MUTEX_DESTROY: %s: pthread_mutex_destroy failed, error %s
Explanation No system resources.
Recommended Action Reload the stack.
Error Message TCP-2-MUTEX_INIT: %s: pthread_mutex_init failed, error %s
Explanation No system resources.
Recommended Action Reload the stack.
Error Message TCP-2-MUTEX_LOCK: %s: pthread_mutex_lock failed, error %s
Explanation No system resources.
Recommended Action Reload the stack.
Error Message TCP-2-MUTEX_TRYLOCK: %s: pthread_mutex_trylock failed, error %s
Explanation No system resources.
Recommended Action Reload the stack.
Error Message TCP-2-MUTEX_UNLOCK: %s: pthread_mutex_unlock failed, error %s
Explanation No system resources.
Recommended Action Reload the stack.
Error Message TCP-2-PANIC: %s: PANIC: %s
Explanation Internal TCP error.
Recommended Action Reload the stack.
Error Message TCP-2-PTHREAD: %s: procket_pthread_create failed for %s: error %d
Explanation No system resources.
Recommended Action Reload the stack.
Error Message TCP-2-REGISTER: %s: %s failed
Explanation Can't register with component.
Recommended Action Reload the stack.
Error Message TCP-2-SETSCHED: %s: Could not set scheduling or priority
Explanation Could not set scheduling or priority.
Recommended Action Reload the stack.
Error Message TCP-2-TSP_INIT: %s: Could not initialize tsp locking library
Explanation Could not initilize locking library.
Recommended Action Reload the stack.
Error Message TCP-3-ALLOC: Error returned from calloc(), errno: %s
Explanation TCP called a calloc API which returned an error.
Recommended Action No special action is required.
Error Message TCP-3-BADSIG: %s: Should not have received signal %d
Explanation Unexpected signal.
Recommended Action No special action is required.
Error Message TCP-3-CLIENT_DELETE: %s: Could not delete client \%s\ pid %d error %s
Explanation Can't delete client from clients list.
Recommended Action Restart component.
Error Message TCP-3-CLIENT_NULL: %s: Client struct for pid %d not found
Explanation Can't find client for pid.
Recommended Action Restart component.
Error Message TCP-3-DOMAININIT: %s: domaininit: %s sw[%d] has no usrreqs
Explanation Bkoken domain structure.
Recommended Action Restart component.
Error Message TCP-3-FORK_ERROR: %s: Parent of the forked child did not create state for child %d:%d
Explanation Parent process did not create state necessary for child process registeration.
Recommended Action Report the issue to Customer Support.
Error Message TCP-3-INVALIDPARAM: %s: Invalid %s
Explanation Invalid parameter.
Recommended Action Restart component.
Error Message TCP-3-IP_PROT_UNKNOWN: %s: Unknown protocol in IP message %d
Explanation IP sent a packet with unknown protocol ID.
Recommended Action Restart component.
Error Message TCP-3-MBUF_COPY: %s: Unable to do m_copyback
Explanation No system resources.
Recommended Action Reload the stack.
Error Message TCP-3-MSG_MAJOR_UNKNOWN: %s: Unknown message major %d, minor %d
Explanation Unknown major type.
Recommended Action Restart component.
Error Message TCP-3-MSG_MINOR_UNKNOWN: %s: Unknown minor message type %d from %s
Explanation Unknown minor type.
Recommended Action Restart component.
Error Message TCP-3-MTS_RESPOND: Error returned from mts_send_response(), errno: %s
Explanation TCP called a MTS API which returned an error.
Recommended Action No special action is required.
Error Message TCP-3-NOMBUF: %s: Unable to get mbuf
Explanation No system resources.
Recommended Action Reload the stack.
Error Message TCP-3-NOMEM: %s: malloc failed for: %s
Explanation No system resources.
Recommended Action Reload the stack.
Error Message TCP-3-PROCTERM_NOTIFY: %s: Termination notification request failed for pid %d
Explanation Request for process termination notification has failed.This could lead to TCP memory leak over period of time.
Recommended Action Report the issue to Customer Support.
Error Message TCP-3-SM_CREATE: %s: Shared memory \%s\ create failed, error %d
Explanation No system resources.
Recommended Action Reload the stack.
Error Message TCP-3-SOCKET_COLL_FOUND: %s: Socket collision found for client: \%s\, pid %d
Explanation Two clients selected on the same socket.
Recommended Action No special action is required.
Error Message TCP-3-SOCKET_COLL: %s: Socket collision, old client: \%s\, pid: %d, new client: \%s\, pid: %d
Explanation Two clients selected on the same socket.
Recommended Action No special action is required.
Error Message TCP-3-SOCREATE: %s: socreate create failed for client \%s\ pid %d error %s
Explanation Can't create socket. See errno for detailsReload software if no memory.
Recommended Action Restart component.
Error Message TCP-3-TCP_MD5_AUTH_FAILURE: %s:Dropping packets from src:%s.%d,dst:%s.%d
Explanation TCP recieved packet which fails authentication. The packetis dropped.
Recommended Action No special action is required.
Error Message TCP-3-TCP_MD5_ERROR: %s:%s
Explanation General MD5 error messages.
Recommended Action No special action is required.
Error Message TCP-3-TCP_MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation TCP called a MTS API which returned an error.
Recommended Action No special action is required.
Error Message TCP-3-TCP_MTS_RECV: %s: mts_recv() failed on %s queue: %s
Explanation TCP called a MTS API which returned an error.
Recommended Action Reload the stack.
Error Message TCP-3-TCP_STRUCT_TO_TLV: Structure to TLV failed, errno: %s
Explanation TLV conversion failed.
Recommended Action No special action is required.
Error Message TCP-3-TCP_TLV_TO_STRUCT: Structure to TLV failed, errno: %s
Explanation TLV conversion failed.
Recommended Action No special action is required.
Error Message TCP-3-TIMER_CANCEL: %s: Timer cancel failed for %s
Explanation No system resources.
Recommended Action Restart component.
Error Message TCP-3-TIMER_CREATE: %s: Timer create failed for %s
Explanation No system resources.
Recommended Action Restart component.
Error Message TCP-3-TIMER_INIT: %s: Timer init failed
Explanation No system resources.
Recommended Action Restart component.
Error Message TCP-3-TIMER_START: %s: Timer start failed for %s
Explanation No system resources.
Recommended Action Restart component.
Error Message TCP-6-EXISTS: %s: Child Exists: %d, ppid %d
Explanation Child already registered.
Recommended Action Report the issue to Customer Support.
Error Message TCP-6-NOT_FOUND: %s: Parent not found: %d, cpid %d
Explanation Parent process not found.
Recommended Action Report the issue to Customer Support.
Error Message TCP-6-TCP_MTS_UNKNOWN_MSG: Received unknown MTS message with opcde %d, dropping it
Explanation TCP recieved an unknown MTS message. The message is dropped.
Recommended Action No special action is required.
This section contains the TSP messages.
Error Message TSP-3-INIT_PROC: %s%s
Explanation Failed to init process with TSP. Parameters are: Reason, Error string
Recommended Action No special action is required.
Error Message TSP-3-INIT_THREAD: %s%s
Explanation Failed to init thread with TSP. Parameters are: Reason, Error string
Recommended Action No special action is required.
Error Message TSP-3-INVALID_THREAD_ID: Invalid thread id: %d
Explanation Invalid thread id. Parameters are: Thread id
Recommended Action No special action is required.
Error Message TSP-3-LOCK_MODE_CONFLICT: Lock mode conflict
Explanation Lock R/W mode conflct.
Recommended Action No special action is required.
Error Message TSP-3-LOCK_RELEASE_ORDER: Lock release out of order
Explanation Releasing locks out of order.
Recommended Action No special action is required.
Error Message TSP-3-LOCK_STACK_EMPTY: Lock stack empty
Explanation Lock stack is empty.
Recommended Action No special action is required.
Error Message TSP-3-LOCK_STACK_FULL: Lock stack full
Explanation Lock stack is full.
Recommended Action No special action is required.
Error Message TSP-3-MUTEX_LOCK_FAIL: pthread_mutex_lock() failed: %s
Explanation Failed to lock mutex. Parameters are: Error string
Recommended Action No special action is required.
Error Message TSP-3-MUTEX_UNLOCK_FAIL: pthread_mutex_unlock() failed: %s
Explanation Failed to unlock mutex. Parameters are: Error string
Recommended Action No special action is required.
Error Message TSP-3-RWSEM_CREATE_FAIL: rwsem_create(sap=%u, flags=%#x) err %#x - %s
Explanation Failed to create rwsem. Parameters are: Lock SAP id, Flags, Error code, Error string
Recommended Action No special action is required.
Error Message TSP-3-RWSEM_DELETE_FAIL: rwsem_lib_delete_owner(vdc=%u, uuid=%u, tid=%u) err %#x
Explanation Failed to delete rwsem owner. Parameters are: VDC id, UUID, TID, Error code
Recommended Action No special action is required.
Error Message TSP-3-RWSEM_HAVE_LOCK_FAIL: rwsem_have_lock(sap=%u, flags=%#x) err %#x - %s
Explanation Failed to query rwsem status. Parameters are: Lock SAP id, Flags, Error code, Error string
Recommended Action No special action is required.
Error Message TSP-3-RWSEM_INIT_FAIL: rwsem_lib_init(vdc=%u, uuid=%u, tid=%u) err %#x - %s
Explanation Failed to initialize rwsem. Parameters are: VDC id, UUID, TID, Error code, Error string
Recommended Action No special action is required.
Error Message TSP-3-RWSEM_LOCK_FAIL: rwsem_lock_no_sig(%s SAP %u) failed: %s
Explanation Failed to lock rwsem. Parameters are: R/W, Lock SAP id, Error string
Recommended Action No special action is required.
Error Message TSP-3-RWSEM_UNLOCK_FAIL: rwsem_unlock(%s SAP %u) failed: %s
Explanation Failed to unlock rwsem. Parameters are: R/W, Lock SAP id, Error string
Recommended Action No special action is required.
Error Message TSP-6-SUTIME_BACKWARDS: Getrusage s/utime went backwards %u.%06lu -> %u.%06lu
Explanation CPU usage counters went backwards. Parameters are: old s/utime, current s/utime
Recommended Action No special action is required.
Error Message TSP-7-INVALID_LOCK_INDEX: Invalid lock index: %d
Explanation Lock index is invalid.
Recommended Action No special action is required.
Error Message TSP-7-LOCK_MAX_COUNT: Lock max reached
Explanation Lock max for process.
Recommended Action No special action is required.
This section contains the TX messages.
Error Message TX-3-TXLIST_ERROR: %s
Explanation TXLIST API returned an error.
Recommended Action No special action is required.
Error Message TX-3-TXLIST_PERROR: %s
Explanation TXLIST API returned a perror.
Recommended Action No special action is required.
Error Message TX-3-TXTHREAD_ERROR: %s
Explanation TXTHREAD API returned an error.
Recommended Action No special action is required.
Error Message TX-3-TXTHREAD_PERROR: %s
Explanation TXTHREAD API returned a perror.
Recommended Action No special action is required.
This section contains the U6RIB messages.
Error Message U6RIB-2-API_INIT_SEM: Failed to init the API semaphore: open: %s, create: %s
Explanation U6RIB could not create the semaphore that protects access to the shared memory between U6RIB and its clients. Parameters are: Error from open, Error from create
Recommended Action Reload the stack.
Error Message U6RIB-2-NOPMEM: Failed to allocate private memory for %s
Explanation U6RIB has run out of private memory. This condition can be caused by a temporary increase in the number of routes in the network, or a general network or router misconfiguration.
Recommended Action Configure the network or router to decrease the number of routes, or add additional memory to the router.
Error Message U6RIB-2-NOSIDMEM: Failed to allocate shared memory for %s
Explanation SID Manager has run out of shared memory.
Recommended Action Reload the stack.
Error Message U6RIB-2-NOSMEM: Failed to allocate shared memory for %s
Explanation U6RIB has run out of shared memory to store routes. This can be caused by a temporary increase of the number of routes in the network, or a general network or router misconfiguration.
Recommended Action ACTION_RTG_LESS_ROUTES_OR_MORE_SMEM.
Error Message U6RIB-2-RES_MGR: Error returned from %s, errno: 0x%08x (%s) in %s()
Explanation The resource manager returned an error to U6RIB, while U6RIB was performing an action relating to its shared memory. Parameters are: RM Function, Error Code, Error Description, Calling Function
Recommended Action Reload the stack.
Error Message U6RIB-2-STARTUP_FAILURE: Startup failure: %s
Explanation An unrecoverable software error has occurred during u6rib startup.
Recommended Action Reload the stack.
Error Message U6RIB-2-TIMER_LIB: %s %s
Explanation The timer library returned an error, causing an unrecoverable problem for U6RIB.
Recommended Action Reload the stack.
Error Message U6RIB-2-TOO_MANY_CLIENTS: %s client \%s\
Explanation U6RIB cannot add this client because the U6RIB client limit has already been reached. Parameters are: Resource, Client
Recommended Action Kill component and don't restart it.
Error Message U6RIB-3-ADD_PATH: %s: could not add path %s/%u via %s for client \%s\.
Explanation A route add operation has failed for the given client. There may be a previous error message that further explains the problem. Parameters are: Function, Prefix, Mask-len, NextHop Info, Client
Recommended Action No special action is required.
Error Message U6RIB-3-ADD_RPATH: Client \%s\ added %s/%u via not found rnh %s/%u%%%s
Explanation A route add operation has failed for the given client. This may be a transient error. Parameters are: Client, Prefix, Mask-len, Recursive Prefix, Recursive Mask-len, Table
Recommended Action Report the issue to Customer Support.
Error Message U6RIB-3-ADD_TPATH_ROUTE: Client \%s\ added %s/%u%%%s
Explanation A route add operation has failed for the given client. This was because the route could not be found. This may be a transient error. Parameters are: Client, Prefix, Mask-len, Table-name
Recommended Action Report the issue to Customer Support.
Error Message U6RIB-3-ADD_TPATH: Client \%s\ added %s/%u via tableid 0x%08x : %s
Explanation A route add operation has failed for the given client. This was because the tableid could not be found. This may be a transient error. Parameters are: Client, Prefix, Mask-len, Table-Id, Error
Recommended Action Report the issue to Customer Support.
Error Message U6RIB-3-ASSERT_ERROR: %s:%d: Assertion \%s\ failed.
Explanation An internal software error has occured. An assertion held to be true failed. Parameters are: Filename, Line number, Expression
Recommended Action Report the issue to Customer Support.
Error Message U6RIB-3-AVLADD_ERROR: Could not add %s (0x%08x) to the %s avl
Explanation U6RIB was unable to add a piece of data to an AVL data structure. Parameters are: Data item, Memory address, Data structure
Recommended Action Reload the stack.
Error Message U6RIB-3-AVLINIT_ERROR: Could not init %s avl for VRF %s
Explanation U6RIB was unable to correctly initialise an AVL data structure. Parameters are: AVL name, VRF-name
Recommended Action Reload the stack.
Error Message U6RIB-3-CMI_MTSSEND_FAILURE: mts_send failure for client %s: %s
Explanation U6RIB was unable to send MTS message to a particular client. Parameters are: Client name, Error
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message U6RIB-3-CMI_PAYLOAD_CONV_ERR: CMI payload conversion error failure from %s order to %s order
Explanation The cmi payload conversion did not occur successfully. Parameters are: order, order
Recommended Action Keep running, do nothing special.
Error Message U6RIB-3-ECMP_LDSHR: %s
Explanation Error related to ECMP load-share configuration which will affect load-sharing for software-switched packets. If parity between hardware and software switching is important, perform a switchover.
Recommended Action Requires operator to intervene.
Error Message U6RIB-3-GET_INSTANCE_ERROR: instance not found for client \%s\ in VRF %s
Explanation U6RIB could not find its data structures for a client in the shown VRF. The shown VRF should be reconfigured in the client. i.e. in router sub-mode configuration, 'no vrf
Recommended Action Requires operator to intervene.
Error Message U6RIB-3-HTADD_ERROR: Could not add %s to the %s hash table
Explanation A severe hash table error was encountered. The system may run into more errors because of this problem.
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message U6RIB-3-IM_INTF_SET: Failed to set ifindex %u in cache
Explanation U6rib failed to update cached interface index. Parameters are: Interface-index
Recommended Action Keep running, do nothing special.
Error Message U6RIB-3-IM_ITER: Cannot initialize IM iterator after getting interface down message (err=%d, %s)
Explanation U6rib failed to update cached interface index. Parameters are: Error-code, Description
Recommended Action Keep running, do nothing special.
Error Message U6RIB-3-INCONSISTENT_RNH: %s: %s/%d
Explanation . Parameters are: Owner, Prefix, Length
Recommended Action No special action is required.
Error Message U6RIB-3-INCONSISTENT_ROUTE: %s: %s/%d via %s
Explanation . Parameters are: Owner, Prefix, Length, Next-hop
Recommended Action No special action is required.
Error Message U6RIB-3-INCONSISTENT_STRUCTURE: %s
Explanation Unexpected remaining state during RIB cleanup.
Recommended Action No special action is required.
Error Message U6RIB-3-INCONSISTENT_SUMMARY: %s: routes %d, rnh's %d
Explanation Unexpected remaining state for client during RIB cleanup,see following for state: 'show routing ipv6 unicast internal event-history errors'. Parameters are: Owner, Routes, RNHs
Recommended Action No special action is required.
Error Message U6RIB-3-INSTANCE_CREATE_ERROR: Failed to create routing instance info for client \%s\, VRF %s
Explanation U6RIB could not create its data structures for a client in the shown VRF. There may be further errors to indicate the failure in more detail. The shown VRF should be reconfigured in the client. i.e. in router sub-mode configuration, 'no vrf
Recommended Action Requires operator to intervene.
Error Message U6RIB-3-KSINK_LIB_ERROR: %s %s
Explanation A severe error was encountered during ksink operations. The system may run into more errors because of this problem.
Recommended Action No special action is required.
Error Message U6RIB-3-MOD_ERROR: Client \%s\ requested modify route for %s/%d: %s
Explanation The named client sent a modify route request, which generated the shown error. Parameters are: Client, Prefix, Prefix-Length, Error
Recommended Action Keep running, do nothing special.
Error Message U6RIB-3-MORE_INFO_ERROR: Client \%s\: table-id 0x%x %s
Explanation This error provides further information about the previous error. Action should be taken depending on the previous error logged. Parameters are: Client, Message
Recommended Action No special action is required.
Error Message U6RIB-3-MORE_MTS_INFO_ERROR: source SAP is: %d dest SAP is: %d
Explanation This error provides further information about the previous MTS error. Action should be taken depending on the previous error logged.
Recommended Action No special action is required.
Error Message U6RIB-3-MTS_BIND: mts_bind failed for %s: %s
Explanation U6RIB was unable to bind to an MTS queue SAP. Parameters are: MTS queue name, Error
Recommended Action Reload the stack.
Error Message U6RIB-3-MTS_DEREGISTER: mts_deregister failed for u6rib: %s
Explanation U6RIB was unable to deregister client from U6RIB notifications, causing an unrecoverable error.
Recommended Action Restart component.
Error Message U6RIB-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation An MTS API returned an error when U6RIB tried to drop a message.
Recommended Action Keep running, do nothing special.
Error Message U6RIB-3-MTS_NO_PAYLOAD_ERROR: Received MTS message with no payload on %s queue with opcode %d, dropping it
Explanation U6RIB recieved an unknown message. The message is dropped.
Recommended Action Keep running, do nothing special.
Error Message U6RIB-3-MTS_OPTIONS: MTS option set failed for opcode %s: %s (%d)
Explanation U6RIB was unable to set options for an MTS opcode. Parameters are: Requestor, Error String, Error
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message U6RIB-3-MTS_RECV: Error returned from mts_recv(%s), errno: %s
Explanation An MTS API returned an error while U6RIB was receiving on an MTS queue. Parameters are: Queue name, Error
Recommended Action Keep running, do nothing special.
Error Message U6RIB-3-MTS_REGISTER: mts_register failed for u6rib: %s
Explanation U6RIB was unable to register client for U6RIB notifications, causing an unrecoverable error.
Recommended Action Restart component.
Error Message U6RIB-3-NO_L3VM_INFO_ERROR: no L3VM info for table id 0x%08x from client \%s\ - unknown to L3VM
Explanation A client tried to add some information to U6RIB, and provided a Table-Id that is unknown in the system. The client should be restarted. Parameters are: Table-IdClient name
Recommended Action Restart component.
Error Message U6RIB-3-NO_L3VM_LIMITS: Could not get routing table limits from L3VM
Explanation U6RIB could not pull the routing limits for the table. L3VM should be restarted.
Recommended Action Restart component.
Error Message U6RIB-3-NOT_INIT_L3VM_ERROR: L3VM info for table id 0x%08x from client \%s\ not available - U6RIB not initialised with L3VM.
Explanation A client tried to add some information to the U6RIB, before U6RIB has registered for table information. The client should be restarted. Parameters are: Table-Id, Client name
Recommended Action Restart component.
Error Message U6RIB-3-OPEN_CLIENT_SHM_ERROR: Failed to open client shared memory \%s\: %s
Explanation The calling process failed with the shown error while trying to open the named U6RIB shared memory region. The status of the memory is shown in 'show process memory shared'. Parameters are: Name of shared memory region
Recommended Action Restart component.
Error Message U6RIB-3-PSS: Error returned from %s, errno: 0x%08x (%s) in %s()
Explanation U6RIB called a PSS API which returned an error. The error reported should be examined for the cause. Parameters are: Failed API, Error Code, Error Description, u6rib Function
Recommended Action Reload the stack.
Error Message U6RIB-3-PTADD_ERROR: Could not add %s/%d to the %s pt, error code %d
Explanation A severe route table error was encountered. The system may run into more errors because of this problem.
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message U6RIB-3-QADD_ERROR: Could not add %s to the %s queue
Explanation A severe queue error was encountered. The system may run into more errors because of this problem.
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message U6RIB-3-QDEL_ERROR: Could not delete %s from the %s queue
Explanation A severe queue error was encountered. The system may run into more errors because of this problem.
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message U6RIB-3-RANGE_CHECK_ERR: Range check of %s failed from %s (0x%08x)
Explanation The value provided is outside of the acceptable range. Parameters are: Range, Provider of value, Value Provided
Recommended Action Report the issue to Customer Support.
Error Message U6RIB-3-RNH_LOOP_ERROR: Number of prefixes forming rnh loop exceeds %d\n Flagging route %s/%d from client \%s\ with nh %s, rnh %s/%d\n as causing rnh loop
Explanation U6RIB detected a loop between routes installed in the RIB. Check the message to see which client caused the loop, and take appropriate ation. Parameters are: Max RNH Loop, Prefix, Prefix Length, Client, Next-hop, Prefix, Prefix Length
Recommended Action Requires operator to intervene.
Error Message U6RIB-3-ROUTECOUNT_UNDERFLOW: Routing table statistic current tried to underflow deleting %s/%d
Explanation The system tried to decrement the current number of routes in thetable, but the statistic was already zero. Parameters are: Prefix, Mask Len
Recommended Action Report the issue to Customer Support.
Error Message U6RIB-3-ROUTELIMIT_EXCEEDED: Number of routes (%llu) reached or exceeds configured limit (%u)
Explanation The number of routes in the named routing table has reached the configured limit. No further routes will be added to the table. Parameters are: Current number of routes, Configured limit, Dropped routes
Recommended Action
Error Message U6RIB-3-ROUTELIMIT_NOT_ENFORCED: Number of routes (%llu) already exceeds newly configured limit (%u)
Explanation The number of routes in the named routing table is already more than the newly configured limit. No further routes will be added to the table, but the new limit has not been enforced. Parameters are: Current number of routes, Configured limit, Dropped routes
Recommended Action
Error Message U6RIB-3-ROUTELIMIT_WARNING: Number of routes (%llu) exceeds warning limit (%u)
Explanation The number of routes in the named routing table has reached the configured warning limit. Parameters are: Current number of routes, Warning limit
Recommended Action
Error Message U6RIB-3-RPM_LIB_ERROR: %s %d
Explanation An RPM library function returned an error. Parameters are: Function, RPM Error Code
Recommended Action No special action is required.
Error Message U6RIB-3-SDWRAP_LIB_ERROR: %s %s
Explanation A SDWrap library function returned an error. Parameters are: Function, SDWrap Error Code
Recommended Action No special action is required.
Error Message U6RIB-3-SEND_FROM_ERROR: Send from U6RIB to client \%s\ failed: %s
Explanation U6RIB was unable to send a message to the shown client. Parameters are: Client, Error
Recommended Action Restart component.
Error Message U6RIB-3-SEND_TO_ERROR: Send to u6rib failed: %s
Explanation The calling process was unable to send a message to U6RIB.
Recommended Action Restart component.
Error Message U6RIB-3-STRUCT_ERROR: Structural error: %s, client \%s\, table id 0x%08x.
Explanation A severe data structural error was encountered. The system may run into more errors because of this problem. Parameters are: Problem, Client, Table id
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message U6RIB-3-TABLE_CREATE_ERROR: Failed to create table info for VRF %s for client \%s\
Explanation U6RIB could not create its table data structure for the VRF being created. There may be further errors that indicate the failure in more detail. The shown VRF should be reconfigured in the system. i.e. in global configuration, 'no vrf context
Recommended Action Requires operator to intervene.
Error Message U6RIB-3-TABLE_STATE_ERROR: Table state %s for VRF %s for client \%s\
Explanation U6RIB received a request from a client for a given VRF, but the given VRF was in a state where that request is not permitted. Parameters are: State, VRF, Client
Recommended Action Requires operator to intervene.
Error Message U6RIB-3-UFDM_MTSSEND_FAILURE: MTS send to UFDM failed with unexpected error %d
Explanation U6RIB was unable to send a route update to UFDM. This means there will be a route missing from the FIB.
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message U6RIB-3-UNCONVERGED_ROUTING_CLIENT: Client \%s\ did not signal convergence
Explanation The named Client did not signal convergence as expected, within a default time frame. Parameters are: Client
Recommended Action Keep running, do nothing special.
Error Message U6RIB-3-UNKNOWN_ROUTING_CLIENT: Client \%s\ trying to perform unexpected routing operation
Explanation The named Client is calling a routing API, but U6RIB does not expect this client to perform route operations. Parameters are: Client
Recommended Action Keep running, do nothing special.
Error Message U6RIB-4-COMM_BUFF_ERROR: Only created %d %s communication buffers of size %d
Explanation Fewer communication buffers were created than expected. This will have been caused by a low memory condition. Examine the logs for the low memory error.
Recommended Action ACTION_RTG_LESS_ROUTES_OR_MORE_SMEM.
Error Message U6RIB-4-INVALID_SHM_RESIZE: Invalid request to re-size the shared memory on standby. Shared memory not re-sized. New size is %u, old size is %u and maximum allowed size for re-size is %u. The standby will need to reload for the changes to take effect.
Explanation U6rib cannot re-size the shared memory on the standby SUP passed a certain threshold. The previous limits still apply.
Recommended Action Reload the stack.
Error Message U6RIB-4-NHLFE_OWNER: %s/%d via %s: NHLFE owner changed from client \%s\ to \%s\
Explanation A given path can only have one Next-Hop Label Forwarding Entry. Thus this warning indicates that configuration has generated a conflict. Parameters are: Prefix, Prefix Length, Next-hop info, Original Client, New Client
Recommended Action Requires operator to intervene.
Error Message U6RIB-4-UFDM_ACKNOT_FOUND: Could not find UFDM buffer with ptr 0x%08x
Explanation Ack received for a UFDM buffer that U6RIB does not know about. Parameters are: Memory address of UFDM buffer
Recommended Action Keep running, do nothing special.
Error Message U6RIB-5-API_INIT_SEM_CLEAR: Cleared the API semaphore from %d
Explanation The API semaphore was in an unexpected state, and was restored to a correct value. Parameters are: Value of semaphore
Recommended Action Keep running, do nothing special.
Error Message U6RIB-5-BOGUS_INTF: Client \%s\ tried to add %s/%d via %s with interface %s
Explanation A bad interface was received in a path add from the client. Parameters are: Client, Prefix, Prefix Length, Next-hop, Interface
Recommended Action No special action is required.
Error Message U6RIB-5-CLT_EVENT_STATE: Client \%s\ unexpected %s event state %d != %d
Explanation An unexpected but handleable event has occurred.
Recommended Action No special action is required.
Error Message U6RIB-5-CLT_NO_BUF: Client \%s\ %s event has no buffer
Explanation An unexpected but handleable event has occurred.
Recommended Action No special action is required.
Error Message U6RIB-5-DUP_REGISTER: Client \%s\ register more than once with same pid
Explanation A client tried to register more than once with U6RIB. The re-registration was ignored.
Recommended Action Keep running, do nothing special.
Error Message U6RIB-5-GENERAL_FAILURE: Failed to %s
Explanation The logged action failed.
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message U6RIB-5-INIT_L3VM_SUCCESS: %s
Explanation There was a previous error trying to initialize l3vm but a retry has been done and it is now successful.
Recommended Action No special action is required.
Error Message U6RIB-5-NOTIFY_THREAD: Failed to notify %s thread - Reschedule
Explanation An unexpected but handleable event has occurred.
Recommended Action No special action is required.
Error Message U6RIB-5-NULL_WORKITEM_PIB: No client info found for work item type %d table %08lu
Explanation An unexpected but handleable event has occurred.
Recommended Action No special action is required.
Error Message U6RIB-5-PID_CHANGED: Client \%s\ register with new pid
Explanation A client re-registered with a new pid. This is likely if the client restarts. U6RIB accepted the re-registration.
Recommended Action Keep running, do nothing special.
Error Message U6RIB-5-RES_MGR_CHANGE: Changed u6route-mem from (%d, %d) to (%d, %d)
Explanation The requested limit-resource command was adapted to fit the limits in this version. Parameters are: Requested Min, Requested Max, New Min, New Max
Recommended Action Keep running, do nothing special.
Error Message U6RIB-5-UNK_MSG_MINOR: Unrecognised %s message minor type %d
Explanation U6RIB received an unknown message. The message is dropped.
Recommended Action Keep running, do nothing special.
Error Message U6RIB-5-UNK_MTS_OPC: %s thread - Unrecognised MTS opcode %d
Explanation U6RIB received an unknown message. The message is dropped. Parameters are: Thread name, Op-code
Recommended Action Keep running, do nothing special.
Error Message U6RIB-6-GENERAL_INFO: %s
Explanation Informational message only.
Recommended Action Keep running, do nothing special.
Error Message U6RIB-6-MTS_SHORT_MSG_ERROR: Received short (%d < %d) MTS message on %s queue with opcode %d, dropping it
Explanation U6RIB received an unknown message. The message is dropped.
Recommended Action Keep running, do nothing special.
Error Message U6RIB-6-NH_DELETED_NIB_INFO: Found hidden next-hop %s (%d) for client \%s\ in deleted NIB
Explanation U6RIB found a hidden next-hop for the client While a client was deregistering for a table. Parameters are: Next-hop, Interface, Client
Recommended Action Keep running, do nothing special.
Error Message U6RIB-6-NO_MTS_PAYLOAD: Received MTS message with no payload in thread %s from sap %d, dropping it
Explanation U6RIB received an unknown message. The message is dropped.
Recommended Action Keep running, do nothing special.
Error Message U6RIB-6-ROUTELIMIT_CUMUL_OVERFLOWED: Routing table cumulative statistic \%s\ overflowed 64 bits
Explanation The routing table cumulative statistic is used internally and for debugging. The statistic just reached the maximum value for 64 bits. Parameters are: Statistic name
Recommended Action Keep running, do nothing special.
Error Message U6RIB-6-ROUTELIMIT_OVERFLOWED: Routing table statistic \%s\ overflowed 32 bits
Explanation The routing table statistic is returned in a MIB which only supports 32 bit values. The statistic just reached the maximum value for 32 bits. Parameters are: Statistic name
Recommended Action Keep running, do nothing special.
Error Message U6RIB-6-ROUTELIMIT_RECOVERED: Number of routes (%llu) is below the configured limit (%u)
Explanation The number of routes in the named routing table has fallen below the configured limit. The routing table has recovered. Parameters are: Current number of routes, Configured limit
Recommended Action Keep running, do nothing special.
Error Message U6RIB-6-ROUTELIMIT_REINSTALL: Routing table was reinstalled
Explanation The routing table was automatically reloaded to allow the new routing limit or because the reinstall threshold was crossed.
Recommended Action Keep running, do nothing special.
Error Message U6RIB-6-ROUTELIMIT_UNDERFLOWED: Routing table statistic \%s\ underflowed
Explanation The routing table statistic just underflowed below 0. Parameters are: Statistic name
Recommended Action Keep running, do nothing special.
Error Message U6RIB-6-TRACE_OVERFLOW: Trace buffer %s overflowed
Explanation The given event trace overflowed. This is normal behaviour. Parameters are: Trace name
Recommended Action Keep running, do nothing special.
This section contains the ULIB messages.
Error Message ULIB-1-NOMEM: Malloc (%d bytes) failed for: %s
Explanation The router did not have enough memory to store mentioned data structures. Parameters are: Size, Error
Recommended Action Out of memory. Add more memory to the router.
Error Message ULIB-2-HA_INFO: ULIB HA info msg - %s
Explanation ULIB received a HA info msg.
Recommended Action No special action is required.
Error Message ULIB-2-HA_TLV: Failed to convert to %s for %s
Explanation ULIB called a TLV intf which returned an error.
Recommended Action No special action is required.
Error Message ULIB-2-SDB_UPDATE: Failed to %s %s data in SDB
Explanation ULIB called a SDB API which returned error.
Recommended Action No special action is required.
Error Message ULIB-2-SLAB_CREATE: slab_create failed for %s
Explanation Slab memory creation failed. System error.
Recommended Action Restart component.
Error Message ULIB-2-SM_CREATE: sm_create failed for %s
Explanation Shared memory creation failed. System error.
Recommended Action Restart component.
Error Message ULIB-3-API_BAD_ARGUMENTS: ulib api: Bad arguments to %s(): %s
Explanation A client's attempt to use an ulib api has failedbecause of bad arguments passed. The client shouldtry again with valid arguments.
Recommended Action No special action is required.
Error Message ULIB-3-API_BAD_RESPONSE: ulib_api: bad response from ulib for \%s\
Explanation A client's request to ULIB got bad response.
Recommended Action Dump core, then restart component.
Error Message ULIB-3-API_FAILED: %s
Explanation Failure inside the ULIB API.
Recommended Action No special action is required.
Error Message ULIB-3-API_SHMEM: ulib api: shared memory operation \%s\ failed, error:%s
Explanation A client's attempt to operate on ULIB's shared memory hasfailed. Client and/or ULIB should be restarted.
Recommended Action Dump core, then restart component.
Error Message ULIB-3-INIT: %s could not be initialized
Explanation Initialization failed. Check the init specific log.
Recommended Action No special action is required.
Error Message ULIB-3-LABEL_CREATE: Could not create %s label from range %s
Explanation Could not create a label from a label range.Probable memory failure, out of bound label, label isalready allocated, or label range is full.
Recommended Action No special action is required.
Error Message ULIB-3-LR_FULL: No free labels available in range %s, [%u, %u]
Explanation Label range is full.
Recommended Action No special action is required.
Error Message ULIB-3-LR_INVALID: label %s: %u does not belong in range %s
Explanation Label range opeartion: the provided label is not presentin the specified label range.
Recommended Action No special action is required.
Error Message ULIB-3-MALLOC: malloc failed for %s structure
Explanation ULIB could not allocate private memory for a structure.
Recommended Action Keep running, do nothing special.
Error Message ULIB-3-MTS_DROP: Error returned from mts_drop(), errno: %s
Explanation ULIB called aN MTS API which returned an error.
Recommended Action No special action is required.
Error Message ULIB-3-MTS_RECV: Error returned from mts_recv(), errno: %s
Explanation ULIB called an MTS API which returned an error.
Recommended Action No special action is required.
Error Message ULIB-3-NOTIFY_BUFFER: Notify %s buffer: mq_send to \%s\ failed %d times
Explanation Sending notification buffer through client's message queue is failing continuously. Probably the client is down, or its message queue is full.
Recommended Action Keep running, do nothing special.
Error Message ULIB-3-REG_COMP: Can't register with %s, %s failed
Explanation Could not register with another component. No communication can take place with the component.Probably the shared memory could not be mapped.
Recommended Action No special action is required.
Error Message ULIB-3-RM: Res Mgr Error: %s\n
Explanation Resource manager error.
Recommended Action No special action is required.
Error Message ULIB-3-SIGNAL: Received %s signal, number %d, %s
Explanation Received a signal.
Recommended Action No special action is required.
Error Message ULIB-3-SLAB_ALLOC: %s slab alloc failed
Explanation ULIB could not allocate memory for a slab.
Recommended Action Keep running, do nothing special.
Error Message ULIB-3-SMALLOC: smalloc failed for %s structure
Explanation ULIB could not allocate shared memory for a structure.Probably the cap of #entries in ULIB has been reached.
Recommended Action Keep running, do nothing special.
Error Message ULIB-3-SNMP_FILL: Failed to fill %s entry in SNMP %s request
Explanation SNMP get request failed.
Recommended Action No special action is required.
Error Message ULIB-3-SRGB_DYN_LR: Cannot allocate Segment Routing Global Block of %d-%d since the dynamic label range of %d-%d cannot contain it
Explanation Allocating the Segment Routing Global Block failed because the dynamic label range cannot contain it. Adjust the dynamic label range or choose a different SRGB.
Recommended Action No special action is required.
Error Message ULIB-3-SRV_INT: %s_internal failed for \%s\
Explanation ULIB server's internal routine for a client requestfailed.
Recommended Action No special action is required.
Error Message ULIB-3-SYSMGR_SRV_QUERY: Query for status of service %s failed
Explanation System manager query for status of a component failed.
Recommended Action No special action is required.
Error Message ULIB-3-THREAD: %s failed for %s thread
Explanation Thread library error.
Recommended Action No special action is required.
Error Message ULIB-3-TIMER: Could not create %s %s timer
Explanation Timer creation failed. Check timer library statistics.
Recommended Action No special action is required.
Error Message ULIB-6-MTS_UNKNOWN_MSG: Received unknown MTS message with opcde %d, dropping it
Explanation ULIB received an unknown message. The message was dropped.
Recommended Action No special action is required.
Error Message ULIB-7-CLNT_REG: %s successful for protocol %s, context %s
Explanation A client component has (re/de)registered successfully with ULIB. It can now add/delete/modify its entries in the database.
Recommended Action No special action is required.
Error Message ULIB-7-SYNC_CTXT: %s context %s
Explanation A routing context has just been synchronized.
Recommended Action No special action is required.
This section contains the URIB messages.
Error Message URIB-2-API_INIT_SEM: Failed to init the client API semaphore: open: %s, create: %s
Explanation URIB could not create the semaphore that protects access to the shared memory between URIB and its clients. Parameters are: Error from open, Error from create
Recommended Action Reload the stack.
Error Message URIB-2-BAD_PT: Possible Patricia tree corruption in %s
Explanation An unrecoverable software error has occurred because of a bad route table.
Recommended Action Reload the stack.
Error Message URIB-2-NOPMEM: Failed to allocate private memory for %s
Explanation URIB has run out of private memory. This condition can be caused by a temporary increase in the number of routes in the network, or a general network or router misconfiguration.
Recommended Action Configure the network or router to decrease the number of routes, or add additional memory to the router.
Error Message URIB-2-NOSMEM: Failed to allocate shared memory for %s
Explanation URIB has run out of shared memory to store routes and related information. This condition can be caused by a temporary increase in the number of routes in the network, or a general network or router misconfiguration.
Recommended Action ACTION_RTG_LESS_ROUTES_OR_MORE_SMEM.
Error Message URIB-2-RES_MGR: Error returned from %s, errno: 0x%08x (%s) in %s()
Explanation The resource manager returned an error to URIB, while URIB was performing an action relating to its shared memory. Parameters are: RM Function, Error Code, Error Description, Calling Function
Recommended Action Reload the stack.
Error Message URIB-2-STARTUP_FAILURE: Startup failure: %s
Explanation An unrecoverable software error has occurred during URIB startup.
Recommended Action Reload the stack.
Error Message URIB-2-TIMER_LIB: %s %s
Explanation The timer library returned an error, causing an unrecoverable problem for URIB.
Recommended Action Reload the stack.
Error Message URIB-2-TOO_MANY_CLIENTS: %s client \%s\
Explanation URIB cannot add this client because the URIB client limit has already been reached. Parameters are: Resource, Client
Recommended Action Kill component and don't restart it.
Error Message URIB-2-UFDM_MGMT: Route %s/%d in VRF management not sent to ufdm
Explanation URIB tried to give a route in the management VRF to UFDM. Parameters are: Prefix, Prefix Length
Recommended Action Keep running, do nothing special.
Error Message URIB-3-ADD_ERROR: Client \%s\ could not add %s/%d to the %s
Explanation A severe error was encountered. The system may run into more errors because of this problem. Parameters are: Client, Prefix, Length, Target
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message URIB-3-ADD_PATH_ERROR: %s: could not add path for client \%s\.
Explanation A route add operation has failed for the given client. There may be a previous error message that further explains the problem. Parameters are: Function, Client
Recommended Action No special action is required.
Error Message URIB-3-ADD_RPATH: Client \%s\ added %s/%u via not found rnh %s/%u%%%s
Explanation A route add operation has failed for the given client. This may be a transient error. Parameters are: Client, Prefix, Mask-len, Recursive Prefix, Recursive Mask-len, Table
Recommended Action Report the issue to Customer Support.
Error Message URIB-3-ADD_TPATH: Client \%s\ added %s/%u via tableid 0x%08x : %s
Explanation A route add operation has failed for the given client. This was because the tableid could not be found. This may be a transient error. Parameters are: Client, Prefix, Mask-len, Table-Id, Error
Recommended Action Report the issue to Customer Support.
Error Message URIB-3-ASSERT_ERROR: %s:%d: Assertion \%s\ failed.
Explanation An internal software error has occured. An assertion held to be true failed. Parameters are: Filename, Line number, Expression
Recommended Action Report the issue to Customer Support.
Error Message URIB-3-AVLADD_ERROR: Could not add %s (0x%08x) to the %s avl
Explanation URIB was unable to add a piece of data to an AVL data structure. Parameters are: Data item, Memory address, Data structure
Recommended Action Reload the stack.
Error Message URIB-3-AVLINIT_ERROR: Could not init %s avl for VRF %s
Explanation URIB was unable to correctly initialise an AVL data structure. Parameters are: AVL name, VRF-name
Recommended Action Reload the stack.
Error Message URIB-3-CC_TOO_BUSY: Proceeding with consistency-check on vrf %s but system looks busy.
Explanation Consistency-check was initiated but URIB is currently processing other updates. This could generate false positive errors. Parameters are: Vrf Name
Recommended Action Keep running, do nothing special.
Error Message URIB-3-CCMARKERERROR: Mismatch in marker_elem = %u and urib_cc_end_download_marker = %u for tib: %s
Explanation An severe error was enountered during Consistency Checker. Parameters are: marker element, marker element, VRF name
Recommended Action No special action is required.
Error Message URIB-3-CCPENDING: Previous Consistency Check has not yet completed
Explanation Previous Consistency Check has not yet completed.
Recommended Action No special action is required.
Error Message URIB-3-CMI_MTSSEND_FAILURE: mts_send failure for client %s: %s
Explanation URIB was unable to send MTS message to a particular client. Parameters are: Client name, Error
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message URIB-3-CMI_PAYLOAD_CONV_ERR: CMI payload conversion error failure from %s order to %s order
Explanation The cmi payload conversion did not occur successfully. Parameters are: order, order
Recommended Action Keep running, do nothing special.
Error Message URIB-3-COPY_ERROR: Could not copy %s for %s/%d
Explanation A severe error was encountered during route optimisation. The system may run into more errors because of this problem.
Recommended Action No special action is required.
Error Message URIB-3-CV_INIT: Couldn't init cond var %s
Explanation URIB process failed to initialize conditional-variable resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message URIB-3-DEL_ERROR: Could not delete %s/%d from %s
Explanation A severe error was encountered. The system may run into more errors because of this problem.
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message URIB-3-DEL_PATH_ERROR: %s: could not del path for client \%s\.
Explanation A route add operation has failed for the given client. There may be a previous error message that further explains the problem. Parameters are: Function, Client
Recommended Action No special action is required.
Error Message URIB-3-EPID_MIS_MATCH_ERROR: \%s\ epid (%u) does not match known epid (%u)
Explanation The id a client provided does not match the id that URIB currently has stored for the client. The client probably restarted ungracefully and URIB has the old id. Parameters are: Client, Expected epid, Received epid
Recommended Action Restart component.
Error Message URIB-3-FILE_OPEN_ERROR: File open error: %s
Explanation This message is for internal debugging only.
Recommended Action No special action is required.
Error Message URIB-3-FILE_WRITE_ERROR: File write error: %s
Explanation This message is for internal debugging only.
Recommended Action No special action is required.
Error Message URIB-3-GENERAL_CRIB_ERROR: %s
Explanation CRIB not in use.
Recommended Action No special action is required.
Error Message URIB-3-GENERAL_PTHREAD_ERROR: Thread %d: %s
Explanation The POSIX pthread library returned an error to URIB. Parameters are: Thread name, Thread operation
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message URIB-3-GENERAL_UI_ERROR: %s
Explanation The shown error occured while the user interface was processing a request. The request should be tried again. Parameters are: Error
Recommended Action ACTION_OPERATOR_RETRY.
Error Message URIB-3-GET_INSTANCE_ERROR: instance not found for client \%s\ in VRF %s
Explanation URIB could not find its data structures for a client in the shown VRF. The shown VRF should be reconfigured in the client. i.e. in router sub-mode configuration, 'no vrf
Recommended Action Requires operator to intervene.
Error Message URIB-3-HTADD_ERROR: Could not add %s to the %s hash table
Explanation A severe hash table error was encountered. The system may run into more errors because of this problem.
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message URIB-3-INCONSISTENT_RNH: %s: %s/%d
Explanation Unexpected remaining recursive next-hop removed during RIB cleanup. Parameters are: Owner, Prefix, Length
Recommended Action Report the issue to Customer Support.
Error Message URIB-3-INCONSISTENT_ROUTE: %s: %s/%d via %s
Explanation Unexpected remaining route removed during RIB cleanup. Parameters are: Owner, Prefix, Length, Next-hop
Recommended Action Report the issue to Customer Support.
Error Message URIB-3-INCONSISTENT_STRUCTURE: %s
Explanation Unexpected remaining state removed during RIB cleanup.
Recommended Action Report the issue to Customer Support.
Error Message URIB-3-INCONSISTENT_SUMMARY: %s: routes %d, rnh's %d
Explanation Unexpected remaining state for client during RIB cleanup. Use the 'show routing ipv4 unicast internal event-history errors' CLI command for more information. Parameters are: Owner, Routes, RNHs
Recommended Action Report the issue to Customer Support.
Error Message URIB-3-INSTANCE_CREATE_ERROR: Failed to create routing instance info for client \%s\, VRF %s
Explanation URIB could not create its data structures for a client in the shown VRF. There may be further errors to indicate the failure in more detail. The shown VRF should be reconfigured in the client. i.e. in router sub-mode configuration, 'no vrf
Recommended Action Requires operator to intervene.
Error Message URIB-3-KSINK_LIB_ERROR: %s %s
Explanation A severe error was encountered during ksink operations. The system may run into more errors because of this problem.
Recommended Action No special action is required.
Error Message URIB-3-LABELCOUNT_UNDERFLOW: Label count tried to underflow for %s
Explanation The client tried to decrement the current number of labels, but thestatistic was already zero. Parameters are: Pib
Recommended Action Keep running, do nothing special.
Error Message URIB-3-MOD_ERROR: Client \%s\ could not modify %s/%d: %s
Explanation A severe error was encountered. The system may run into more errors because of this problem. Parameters are: Client, Prefix, Length, Reason
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message URIB-3-MORE_INFO_ERROR: Client \%s\: %s
Explanation This error provides further information about the previous error. Action should be taken depending on the previous error logged. Parameters are: Client, Message
Recommended Action No special action is required.
Error Message URIB-3-MORE_MTS_INFO_ERROR: source SAP is: %d dest SAP is: %d
Explanation This error provides further information about the previous MTS error. Action should be taken depending on the previous MTS error logged.
Recommended Action No special action is required.
Error Message URIB-3-MTS_BIND: mts_bind failed for %s: %s
Explanation URIB was unable to bind to an MTS queue SAP, causing an unrecoverable error. Parameters are: MTS queue name, Error
Recommended Action Reload the stack.
Error Message URIB-3-MTS_DEREGISTER: mts_deregister failed for urib: %s
Explanation URIB was unable to deregister client from URIB notifications, causing an unrecoverable error.
Recommended Action Restart component.
Error Message URIB-3-MTS_DROP_CLIENT: Error returned from mts_drop() for %s, error: %s
Explanation MTS API returned an error when URIB client tried to drop a message. Parameters are: MTS queue name, Error
Recommended Action Keep running, do nothing special.
Error Message URIB-3-MTS_DROP: Error returned from mts_drop(), error: %s
Explanation An MTS API returned an error when URIB tried to drop a message.
Recommended Action Keep running, do nothing special.
Error Message URIB-3-MTS_NO_CLIENT_SAP: %s: client \%s\ has not provided a SAP for ack
Explanation A client registered with URIB, but did not provide a SAP for URIB to send reply messages to. This caused an unrecoverable error.
Recommended Action Restart component.
Error Message URIB-3-MTS_NO_PAYLOAD_ERROR: Received MTS message with no payload on %s queue with opcode %d, dropping it. src SAP: %d dst SAP: %d
Explanation URIB recieved an unknown message. The message is dropped.
Recommended Action Keep running, do nothing special.
Error Message URIB-3-MTS_OPTIONS: MTS option set failed for opcode %s: %s (%d)
Explanation URIB was unable to set options for an MTS opcode. Parameters are: Requestor, Error String, Error
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message URIB-3-MTS_RECV: Error returned from mts_recv(%s), errno: %s
Explanation An MTS API returned an error while URIB was receiving on an MTS queue. Parameters are: Queue name, Error
Recommended Action Keep running, do nothing special.
Error Message URIB-3-MTS_REGISTER: mts_register failed for urib: %s
Explanation URIB was unable to register client for URIB notifications, causing an unrecoverable error.
Recommended Action Restart component.
Error Message URIB-3-MTS_SHORT_MSG_ERROR: Received short (%d < %d) MTS message on %s queue with opcode %d, dropping it. src SAP: %d dst SAP: %d
Explanation URIB recieved an unknown message. The message is dropped.
Recommended Action Keep running, do nothing special.
Error Message URIB-3-MTS_SIZE_ERROR: %s: incorrect %s message size from client %s: %d (should be %d)
Explanation The size of a URIB message is incorrect for the type of message. The message is dropped.
Recommended Action Keep running, do nothing special.
Error Message URIB-3-MTS_UBIND: mts_unbind failed for %s: %s
Explanation URIB was unable to unbind from an MTS queue SAP, causing an unrecoverable error. Parameters are: MTS queue name, Error
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message URIB-3-MTS_UNK_OPC: Received unknown MTS message on %s queue with opcode %d, dropping it. src SAP: %d dst SAP: %d
Explanation URIB recieved an unknown message. The message is dropped. Parameters are: Queue name, Op-code, SAP number, SAP number
Recommended Action Keep running, do nothing special.
Error Message URIB-3-MUTEX_INIT: Couldn't init mutex %s
Explanation URIB process failed to initialize mutex system resource. Parameters are: Thread Name
Recommended Action Dump core, then restart component.
Error Message URIB-3-NH_RESOLV_ADD_ERROR: Could not add %s/%d to the %s (%d) resolve buffer
Explanation A severe error was encountered. The system may run into more errors because of this problem.
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message URIB-3-NO_L3VM_INFO_ERROR: no L3VM info for table id 0x%08x from client \%s\ - unknown to L3VM
Explanation A client tried to add some information to URIB and provided a Table-Id that is unknown in the system. The client should be restarted. Parameters are: Table-IdClient name
Recommended Action Restart component.
Error Message URIB-3-NO_L3VM_LIMITS: Could not get routing table limits from L3VM
Explanation URIB could not pull the routing limits for the table. L3VM should be restarted.
Recommended Action Restart component.
Error Message URIB-3-NOT_INIT_L3VM_ERROR: L3VM info for table id 0x%08x from client \%s\ not available - URIB not initialised with L3VM
Explanation A client tried to add some information to the URIB, before URIB has registered for the table information. The client should be restarted. Parameters are: Table-Id, Client name
Recommended Action Restart component.
Error Message URIB-3-OPEN_CLIENT_SHM_ERROR: Failed to open client shared memory \%s\: %s
Explanation The calling process failed with the shown error while trying to open the named URIB shared memory region. The status of the memory is shown in 'show process memory shared'. Parameters are: Name of shared memory region
Recommended Action Restart component.
Error Message URIB-3-PSS: Error returned from %s, errno: 0x%08x (%s) in %s()
Explanation URIB called a PSS API which returned an error. The error reported should be examined for the cause. Parameters are: Failed API, Error Code, Error Description, URIB Function
Recommended Action Reload the stack.
Error Message URIB-3-PTADD_ERROR: Could not add %s/%d to the %s pt, error code %d
Explanation A severe route table error was encountered. The system may run into more errors because of this problem.
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message URIB-3-PTDEL_ERROR: Could not delete %s/%d from the URIB pt, error code %d
Explanation A severe route table error was encountered. The system may run into more errors because of this problem.
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message URIB-3-QADD_ERROR: Could not add %s to the %s queue
Explanation A severe queue error was encountered. The system may run into more errors because of this problem.
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message URIB-3-RANGE_CHECK_ERR: Range check of %s failed from %s (0x%08x)
Explanation The value provided is outside of the acceptable range. Parameters are: Range, Provider of value, Value Provided
Recommended Action Report the issue to Customer Support.
Error Message URIB-3-RANGE_CHECK_ERROR: Range check of %s failed from %s (0x%08x)
Explanation The value provided is outside of the acceptable range. Parameters are: Range, Provider of value, Value Provided
Recommended Action Report the issue to Customer Support.
Error Message URIB-3-RNH_REFCOUNT: Client \%s\ deleting RNH %s/%u with refcount %u
Explanation A client tried to delete a Recursive Next-hop while that RNH was still in use. Parameters are: Client, Prefix, Mask-len, Reference count
Recommended Action Report the issue to Customer Support.
Error Message URIB-3-ROUTECOUNT_UNDERFLOW: Routing table statistic current tried to underflow deleting %s/%d
Explanation The system tried to decrement the current number of routes in thetable, but the statistic was already zero. Parameters are: Prefix, Mask Len
Recommended Action Report the issue to Customer Support.
Error Message URIB-3-RPM_LIB_ERROR: %s %d
Explanation An RPM library function returned an error. Parameters are: Function, RPM Error Code
Recommended Action No special action is required.
Error Message URIB-3-SDWRAP_LIB_ERROR: %s %s
Explanation A SDWrap library function returned an error. Parameters are: Function, SDWrap Error Code
Recommended Action No special action is required.
Error Message URIB-3-SEND_FROM_ERROR: Send from URIB to client \%s\ failed: %s
Explanation URIB was unable to send a message to the shown client. Parameters are: Client, Error
Recommended Action Restart component.
Error Message URIB-3-SEND_NOTIF_ERROR: Failed to send %s notification buffer to client \%s\
Explanation URIB was unable to send a notification to a client. Parameters are: Type of Notify, Client, Retries
Recommended Action Restart component.
Error Message URIB-3-SEND_TO_ERROR: Send to URIB failed: %s
Explanation The calling process was unable to send a message to URIB.
Recommended Action Restart component.
Error Message URIB-3-SHARED_NH_ADD: Could not add nh into the shared database for route %s.
Explanation Impossible to add a nh to the database.
Recommended Action No special action is required.
Error Message URIB-3-SHARED_NH_UPDATE: Could not update nh into the shared database for element %s.
Explanation Impossible to update a nh to the database.
Recommended Action No special action is required.
Error Message URIB-3-TABLE_CREATE_ERROR: Failed to create table info for VRF %s for client \%s\
Explanation URIB could not create its table data structure for the VRF being created. There may be further errors that indicate the failure in more detail. The shown VRF should be reconfigured in the system. i.e. in global configuration, 'no vrf context
Recommended Action Requires operator to intervene.
Error Message URIB-3-TABLE_STATE_ERROR: Table state %s for VRF %s for client \%s\
Explanation URIB received a request from a client for a given VRF, but the given VRF was in a state where that request is not permitted. Parameters are: State, VRF, Client
Recommended Action Requires operator to intervene.
Error Message URIB-3-UFDM_MTSSEND_FAILURE: MTS send
Explanation URIB was unable to send an update to UFDM. The update can be a route or message like table delete.
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message URIB-3-UNEXPECTED_MESSAGE: %s %d. src SAP: %d dst SAP: %d
Explanation An unexpected interprocess message was received.
Recommended Action Keep running, do nothing special.
Error Message URIB-3-XRI_TYPE_ERROR: Unknown XRI type %u
Explanation URIB detected unknown eXtended route information while displaying a next-hop address.
Recommended Action Keep running, do nothing special.
Error Message URIB-4-INVALID_PIB: %s %s
Explanation A bad protocol information block was encountered in the given situation. Parameters are: Situation, Message
Recommended Action Keep running, do nothing special.
Error Message URIB-4-INVALID_SHM_RESIZE: Invalid request to re-size the shared memory on standby. Shared memory not re-sized. New size is %u old size is %u and maximum allowed size for re-size is %u. The standby will need to reload for the changes to take effect.
Explanation Urib cannot re-size the shared memory on the standby SUP passed a certain threshold. The previous limits still apply.
Recommended Action Reload the stack.
Error Message URIB-4-NH_RESOLV_LUKUP: Could not find %s/%d while processing %s (%d) resolve buffer
Explanation Unresolved nexthop not cleaned up properly.
Recommended Action No special action is required.
Error Message URIB-4-NHLFE_OWNER_SRTE: %s/%d via binding label %u: NHLFE owner changed from client \%s\ to \%s\
Explanation A given SR-TE path has an invalid binding label. Thus this warning indicates that configuration has generated a conflict. Parameters are: Prefix, Prefix Length, Binding LabelOriginal Client, New Client
Recommended Action Requires operator to intervene.
Error Message URIB-4-NHLFE_OWNER: %s/%d via %s%%%s: NHLFE owner changed from client \%s\ to \%s\
Explanation A given path can only have one Next-Hop Label Forwarding Entry. Thus this warning indicates that configuration has generated a conflict. Parameters are: Prefix, Prefix Length, Next-hop, Interface, Original Client, New Client
Recommended Action Requires operator to intervene.
Error Message URIB-4-OPEN_CLIENT_SHM_WARNING: Attempt to execute \%s\ was not successful: %s
Explanation The calling process failed with the shown error while trying to open the named URIB shared memory region. The status of the memory is shown in 'show process memory shared'. Parameters are: Name of shared memory region
Recommended Action Restart component.
Error Message URIB-4-ROUTELIMIT_EXCEEDED: Number of routes (%llu) reached or exceeds configured limit (%u)
Explanation The number of routes in the named routing table has reached the configured limit. No further routes will be added to the table. Parameters are: Current number of routes, Configured limit, Dropped routes
Recommended Action
Error Message URIB-4-ROUTELIMIT_NOT_ENFORCED: Number of routes (%llu) already exceeds newly configured limit (%u)
Explanation The number of routes in the named routing table is already more than the newly configured limit. No further routes will be added to the table, but the new limit has not been enforced. Parameters are: Current number of routes, Configured limit, Dropped routes
Recommended Action
Error Message URIB-4-ROUTELIMIT_WARNING: Number of routes (%llu) exceeds warning limit (%u)
Explanation The number of routes in the named routing table has reached the configured warning limit. Parameters are: Current number of routes, Warning limit
Recommended Action
Error Message URIB-4-RTDEL_ERROR: Could not find prefix %s/%d, client \%s\'s delete request
Explanation Route delete request was received for a non-existing route. Parameters are: Prefix, Prefix Length, Client
Recommended Action Keep running, do nothing special.
Error Message URIB-4-UFDM_ACKNOT_FOUND: Could not find UFDM buffer with ptr 0x%08x
Explanation Ack received for a UFDM buffer that URIB does not know about. Parameters are: Memory address of UFDM buffer
Recommended Action Keep running, do nothing special.
Error Message URIB-4-UFDM_MTSSEND_FAILURE_RETRY: MTS send
Explanation URIB was unable to send a route update to UFDM.
Recommended Action No special action is required.
Error Message URIB-4-UNEXPECTED_VALUE: Unexpected value for %s (%d)
Explanation An unexpected value was encountered for the logged event.
Recommended Action Keep running, do nothing special.
Error Message URIB-4-XL_LICENSE_MEMORY: XL License installed
Explanation An XL License was just installed in the system. The memory currently configured for URIB may not be big enough to hold all the routes the hardware can install. Check VDC resource u4route-mem, then switchover to apply.
Recommended Action No special action is required.
Error Message URIB-4-ZERO_NEXTHOP: Client \%s\ added 0.0.0.0 next hop and interface %s is not point-to-point
Explanation The client protocol added a 0.0.0.0 next-hop address on a non point-to-point interface. Parameters are: Client, Interface
Recommended Action No special action is required.
Error Message URIB-5-API_INIT_SEM_CLEAR: Cleared the API semaphore from %d
Explanation The API semaphore was in an unexpected state, and was restored to a correct value. Parameters are: Value of semaphore
Recommended Action Keep running, do nothing special.
Error Message URIB-5-BOGUS_INTF: Client \%s\ tried to add %s/%d via %s with invalid iod %d
Explanation A bad interface was received in a path add from the client. Parameters are: Client, Prefix, Prefix Length, Next-hop, Iod
Recommended Action Restart component.
Error Message URIB-5-BOGUS_MASK: Client \%s\ tried to add %s/%d
Explanation A bogus mask was received from the client. Parameters are: Client, Prefix, Prefix Length
Recommended Action Restart component.
Error Message URIB-5-BOGUS_PREFIX: \%s\ tried to add %s/%d
Explanation A bogus prefix was received from the client. Parameters are: Client, Prefix, Prefix Length
Recommended Action Restart component.
Error Message URIB-5-BOGUS_RNH: \%s\ tried to add %s/%d with RNH %s/%d
Explanation A bogus update with unexpected RNH was received from the client. Parameters are: Client, Prefix, Prefix Length, RNH, RNH Length
Recommended Action Restart component.
Error Message URIB-5-GENERAL_FAILURE: Failed to %s
Explanation The logged action failed, causing an unrecoverable error.
Recommended Action ACTION_SWITCHOVER_SYSTEM.
Error Message URIB-5-PATH_DELETE_SRTE: Could not find %s for client \%s\, prefix %s/%d binding label %u
Explanation URIB could not find the path that a client tried to delete. Parameters are: Structure, Client, Prefix, Prefix Length, Label
Recommended Action Keep running, do nothing special.
Error Message URIB-5-PATH_DELETE: Could not find %s for client \%s\, prefix %s/%d nexthop %s, %s
Explanation URIB could not find the path that a client tried to delete. Parameters are: Structure, Client, Prefix, Prefix Length, Next-hop, Interface
Recommended Action Keep running, do nothing special.
Error Message URIB-5-RES_MGR_CHANGE: Changed u4route-mem from (%d, %d) to (%d, %d)
Explanation The requested limit-resource command was adapted to fit the limits in this version. Parameters are: Requested Min, Requested Max, New Min, New Max
Recommended Action Keep running, do nothing special.
Error Message URIB-5-RPATH_DELETE: Could not find %s for client \%s\, prefix %s/%d rnh %s/%u
Explanation URIB could not find the recursive path that a client tried to delete. Parameters are: Structure, Client, Prefix, Prefix Length, Recursive Prefix, Recursive Mask-len
Recommended Action Keep running, do nothing special.
Error Message URIB-6-GENERAL_INFO: %s
Explanation Informational message only.
Recommended Action Keep running, do nothing special.
Error Message URIB-6-NH_DELETED_NIB_INFO: Found hidden rnh %s/%d for client \%s\ in deleted NIB
Explanation URIB found a hidden next-hop for a client while the client was deregistering for a table. Parameters are: Prefix, Mask Length, Interface, Client
Recommended Action Keep running, do nothing special.
Error Message URIB-6-ROUTELIMIT_CUMUL_OVERFLOWED: Routing table cumulative statistic \%s\ overflowed 64 bits
Explanation The routing table cumulative statistic is used internally and for debugging. The statistic just reached the maximum value for 64 bits. Parameters are: Statistic name
Recommended Action Keep running, do nothing special.
Error Message URIB-6-ROUTELIMIT_OVERFLOWED: Routing table statistic \%s\ overflowed 32 bits
Explanation The routing table statistic is returned in a MIB which only supports 32 bit values. The statistic just reached the maximum value for 32 bits. Parameters are: Statistic name
Recommended Action Keep running, do nothing special.
Error Message URIB-6-ROUTELIMIT_RECOVERED: Number of routes (%llu) is below the configured limit (%u)
Explanation The number of routes in the named routing table has fallen below the configured limit. The routing table has recovered. Parameters are: Current number of routes, Configured limit
Recommended Action Keep running, do nothing special.
Error Message URIB-6-ROUTELIMIT_REINSTALL: Routing table was reinstalled
Explanation The routing table was automatically reloaded to allow the new routing limit or because the reinstall threshold was crossed.
Recommended Action Keep running, do nothing special.
Error Message URIB-6-ROUTELIMIT_UNDERFLOWED: Routing table statistic \%s\ underflowed
Explanation The routing table statistic just underflowed below 0. Parameters are: Statistic name
Recommended Action Keep running, do nothing special.
Error Message URIB-6-TRACE_OVERFLOW: Trace buffer %s overflowed
Explanation The given event trace overflowed. This is normal behaviour. Parameters are: Trace name
Recommended Action Keep running, do nothing special.
Error Message URIB-7-RNH_LOOP_ERROR_NO_RNH: Number of prefixes forming rnh loop exceeds %d\n Flagging route %s/%d from client \%s\, rnh not found\n
Explanation URIB detected a loop between routes installed in the RIB. The message shows which client caused the loop. Parameters are: Max RNH Loop, Prefix, Prefix Length, Client
Recommended Action Requires operator to intervene.
Error Message URIB-7-RNH_LOOP_ERROR: Number of prefixes forming rnh loop exceeds %d\n Flagging route %s/%d from client \%s\ with rnh %s/%d\n as causing rnh loop
Explanation URIB detected a loop between routes installed in the RIB. The message shows which client caused the loop. Parameters are: Max RNH Loop, Prefix, Prefix Length, Client, Prefix, Prefix Length
Recommended Action Requires operator to intervene.