Chapter 1. Notice

- Notice

Notice

Warning

This document should be used only as a glossary reference for possible commands. The listing of a command in this document does not guarantee that the command is available or supported for your platform or application.

The command information in this reference document is auto-generated from the NX-OS source code. While we attempt to manually remove unsupported, deprecated, or internal-use commands, such commands may occasionally appear in this document. Also, with the large variety of hardware platform combinations using NX-OS software, some listed commands may not be applicable or recommended for a specific platform. Platform-based dependency information is not provided in this command reference.

We strongly encourage you to refer to the configuration guides for appropriate commands to configure and operate a feature. Command limitations, restrictions, and recommendations are documented only in the configuration guides. When in doubt, please consult your Cisco representative.

Part I. All Show Commands

- A Show Commands

- B Show Commands

- C Show Commands

- D Show Commands

- E Show Commands

- F Show Commands

- G Show Commands

- H Show Commands

- I Show Commands

- K Show Commands

- L Show Commands

- M Show Commands

- N Show Commands

- O Show Commands

- P Show Commands

- Q Show Commands

- R Show Commands

- S Show Commands

- T Show Commands

- U Show Commands

- V Show Commands

- W Show Commands

- X Show Commands

Chapter 2. A Show Commands

- show aaa accounting

- show aaa authentication

- show aaa authentication login

- show aaa authentication login ascii-authentication

- show aaa authentication login error-enable

- show aaa authentication login invalid-username-log

- show aaa authentication login password-aging

- show aaa authorization

- show aaa groups

- show aaa local user blocked

- show aaa user default-role

- show access-list

- show access-list database

- show access-list resource

- show access-lists

- show accounting log

- show accounting log all

- show accounting log last-index

- show accounting log nvram

- show accounting log nvram last-index

- show accounting log nvram start-seqnum

- show accounting log start-seqnum

- show acl status

- show adbm internal errors

- show adbm internal info

- show adbm internal mem-stats

- show adbm internal msgs

- show adbm internal vsan

- show amt internal event-history

- show amt internal library-info

- show amt process

- show amt vrf all

- show archive log config all

- show arp access-lists

show aaa accounting

show aaa accounting [ __readonly__ [ TABLE_acctMethods <service> <methods> ] ]

Syntax Description

Syntax Description

show

Show running system information

aaa

Show aaa information

accounting

Show accounting configuration

__readonly__

(Optional)

TABLE_acctMethods

(Optional)

service

(Optional) service type

methods

(Optional) Accounting methods configured for the application

Command Mode

- /exec

show aaa authentication

show aaa authentication [ __readonly__ [ TABLE_AuthenMethods <service> <method> ] ]

Syntax Description

Syntax Description

show

Show running system information

aaa

Show aaa information

authentication

Show authentication configuration

__readonly__

(Optional)

TABLE_AuthenMethods

(Optional)

service

(Optional) Service for which authentication is needed

method

(Optional) Authentication method used for the service

Command Mode

- /exec

show aaa authentication login

show aaa authentication login { mschap | mschapv2 | chap } [ __readonly__ [ <mschap_status> <mschapv2_status> <chap_status> ] ]

Syntax Description

Syntax Description

show

Show running system information

aaa

Show aaa information

authentication

Show authentication configuration

login

Show authentication login error message configuration

mschap

Show authentication login MSCHAP enable configuration

mschapv2

Show authentication login MSCHAP V2 enable configuration

chap

Show authentication login CHAP enable configuration

__readonly__

(Optional)

mschap_status

(Optional) mschap enabled or disabled

mschapv2_status

(Optional) mschapv2 enabled or disabled

chap_status

(Optional) chap enabled or disabled

Command Mode

- /exec

show aaa authentication login ascii-authentication

show aaa authentication login ascii-authentication [ __readonly__ { <ascii_authen_status> } ]

Syntax Description

Syntax Description

show

Show running system information

aaa

Show aaa information

authentication

Show authentication configuration

login

Show authentication login message configuration

ascii-authentication

Show ascii-authentication configuration

__readonly__

(Optional)

ascii_authen_status

(Optional) ascii authentication status

Command Mode

- /exec

show aaa authentication login error-enable

show aaa authentication login error-enable [ __readonly__ [ <status> ] ]

Syntax Description

Syntax Description

show

Show running system information

aaa

Show aaa information

authentication

Show authentication configuration

login

Show authentication login error message configuration

error-enable

Show authentication login error message enable configuration

__readonly__

(Optional)

status

(Optional) login error-enable enabled or disabled

Command Mode

- /exec

show aaa authentication login invalid-username-log

show aaa authentication login invalid-username-log [ __readonly__ [ <status> ] ]

Syntax Description

Syntax Description

show

Show running system information

aaa

Show aaa information

authentication

Show authentication configuration

login

Show authentication login message configuration

invalid-username-log

Show invalid username log configuration

__readonly__

(Optional)

status

(Optional) login invalid-username-log enabled or disabled

Command Mode

- /exec

show aaa authentication login password-aging

show aaa authentication login password-aging [ __readonly__ { <passwordAging_status> } ]

Syntax Description

Syntax Description

show

Show running system information

aaa

Show aaa information

authentication

Show authentication configuration

login

Show authentication login error message configuration

password-aging

Show password-aging enable configuration

__readonly__

(Optional)

passwordAging_status

(Optional) login password-aging

Command Mode

- /exec

show aaa authorization

show aaa authorization [ all ] [ __readonly__ [ <pki_ssh_cert_author> <pki_ssh_pubkey_author> ] [ TABLE_cmd_methods <appl_subtype> <cmd_type> <methods> ] [ TABLE_app_methods <appl> <methods> ] ]

Syntax Description

Syntax Description

show

Show running system information

aaa

Show aaa information

authorization

Show authorization configuration

all

(Optional) Show all(include defaults configurations) authorization info

__readonly__

(Optional)

pki_ssh_cert_author

(Optional)

pki_ssh_pubkey_author

(Optional)

TABLE_cmd_methods

(Optional) table containing command authorization methods

appl_subtype

(Optional)

cmd_type

(Optional)

methods

(Optional)

TABLE_app_methods

(Optional) table containing application authorization methods

appl

(Optional)

methods

(Optional)

Command Mode

- /exec

show aaa groups

show aaa groups [ __readonly__ { TABLE_groups <group> } ]

Syntax Description

Syntax Description

show

Show running system information

aaa

Show aaa information

groups

Show configured groups

__readonly__

(Optional)

TABLE_groups

(Optional) Table showing aaa groups

group

(Optional) Name of the group

Command Mode

- /exec

show aaa local user blocked

show aaa local user blocked [ __readonly__ { TABLE_sessions <u_name> <u_state> } ]

Syntax Description

Syntax Description

show

Show running system information

aaa

Configure aaa functions

local

Local username

user

Local system user

blocked

Display Blocked users

__readonly__

(Optional)

TABLE_sessions

(Optional) aaa local users blocked table

u_name

(Optional) Name of the user

u_state

(Optional) State of the user

Command Mode

- /exec

show aaa user default-role

show aaa user default-role [ __readonly__ { default_role_status <udr_status> } ]

Syntax Description

Syntax Description

show

Show running system information

aaa

Show aaa information

user

Remotely authenticated user

default-role

Default role assigned by aaa-admin for remote authentication

__readonly__

(Optional)

default_role_status

(Optional) user default role status

udr_status

(Optional) Status of user default role

Command Mode

- /exec

show access-list

show { system internal | hardware } access-list { summary | [ vdc <vdc_id> ] { [ interface <if_name> | vlan <vlan_id> | inband table <table> ] [ { input | output } { config | { { entries | merge } [ detail ] } | statistics | l4ops | redirect | sampler } ] } } [ module <module> ] [ __readonly__ <type> <feature> <plcy_id> <src_ip> <src_mask> <dst_ip> <dst_mask> <proto> <l4ops> <action> <mac> <cos> <vlan> <l2_proto> <ethertype> ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

internal

Commands for internal use

hardware

Show hardware information

access-list

Access Control List

summary

summary

vdc

(Optional) vdc id

vdc_id

(Optional) vdc_id

interface

(Optional) interface name

if_name

(Optional) display access list for the interface

vlan

(Optional) vlan_id

vlan_id

(Optional) vlan_id

inband

(Optional) inband interface

table

(Optional) vrf table number

table

(Optional) vrf table number

input

(Optional) input/ingress policies

output

(Optional) output/egress policies

config

(Optional) parsed policy software database

entries

(Optional) tcam entries

statistics

(Optional) aggregate statistics

l4ops

(Optional) l4 operations information

redirect

(Optional) redirect resource information

sampler

(Optional) with sampler details

merge

(Optional) tcam entries merge information

detail

(Optional) detailed information

module

(Optional) Slot/module

module

(Optional) Slot/module number

__readonly__

(Optional)

type

(Optional) policy type eg: ACL, QOS

feature

(Optional) feature type eg: RACL, VACL

plcy_id

(Optional) policy id

src_ip

(Optional) src ipv4 address

src_mask

(Optional) src mask

dst_ip

(Optional) dst ipv4 address

dst_mask

(Optional) dst mask

proto

(Optional) protocol eg: TCP, UDP ...

l4ops

(Optional) layer 4 operations

action

(Optional) action

mac

(Optional) mac address

cos

(Optional) acos value

vlan

(Optional) vlan id

l2_proto

(Optional) L2 protocol

ethertype

(Optional) ethertype

Command Mode

- /exec

show access-list database

show { system internal | hardware } access-list [ vdc <vdc_id> ] database { interface | vlan | policy | process } [ module <module> ] [ __readonly__ <if_idx> <vlan> <plcy_id> <process_info> ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

internal

Commands for internal use

hardware

Show hardware information

access-list

Access Control List

vdc

(Optional) vdc id

vdc_id

(Optional) vdc_id

database

Show memory database

interface

display interfaces/vlans in a vdc with policies

policy

display policies in a vdc

vlan

display vlans in a vdc

process

display process database in a vdc

module

(Optional) Slot/module

module

(Optional) Slot/module number

__readonly__

(Optional)

if_idx

(Optional) interface

vlan

(Optional) vlan

plcy_id

(Optional) policy id

process_info

(Optional) process information

Command Mode

- /exec

show access-list resource

show { system internal | hardware } access-list resource { { { entries | l4ops | redirect | ipv6-compression | mac-compression | aqm-d | aqm-q | oq | opool } [ detail ] } | utilization | { entry tcam <tcam_id> bank <bank_id> index <index> } } [ no-header ] [ module <module> ] [ __readonly__ TABLE_resource_util_info <resource_hdr> <ents_use> <ents_free> <ents_pctage> ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

internal

Commands for internal use

hardware

Show hardware information

access-list

Access Control List

resource

hardware resource

entries

tcam entries

l4ops

l4 operations information

redirect

redirect resource information

entry

display hardware information of a tcam entry

tcam

tcam id

tcam_id

tcam_id

bank

bank id

bank_id

bank_id

index

index within bank

index

index withing bank

utilization

utilization matrix

ipv6-compression

ipv6 compression

mac-compression

mac compression table info

aqm-d

aqm d params

aqm-q

aqm q params

oq

oq profiles

opool

opool profiles

detail

(Optional) detailed information

no-header

(Optional) Do not print header

module

(Optional) Slot/module

module

(Optional) Slot/module number

__readonly__

(Optional)

TABLE_resource_util_info

(Optional) resource utilization information

resource_hdr

(Optional) resource header

ents_use

(Optional) entries in use

ents_free

(Optional) free tcam entries

ents_pctage

(Optional) tcam entries usage percentage

Command Mode

- /exec

show access-lists

show [ <ip_ipv6_mac> ] access-lists [ <name> ] [ capture session <capture_session> ] [ <expanded> | <summary> | <private> | <brief> ] [ __readonly__ TABLE_ip_ipv6_mac <op_ip_ipv6_mac> <acl_name> [ <statistics> ] [ <frag_opt_permit_deny> ] [ <global_capture_session> ] [ TABLE_seqno <seqno> { <permitdeny> [ <proto_str> | <proto> | <ip> | <ipv6> ] { <src_any> | <src_ip_prefix> | <src_ip_addr> <src_ip_mask> | <src_ipv6_prefix> | <src_ipv6_addr> <src_ipv6_mask> | <mac_src> <mac_src_wild> | <src_addrgrp> } [ <src_port_op> [ <src_port1_str> ] { <src_port1_num> } [ <src_port2_str> | <src_port2_num> ] | <src_portgrp> ] { <dest_any> | <dest_ip_prefix> | <dest_ip_addr> <dest_ip_mask> | <dest_ipv6_prefix> | <dest_ipv6_addr> <dest_ipv6_mask> | <mac_dest> <mac_dest_wild> | <dest_addrgrp> } [ <dest_port_op> [ <dest_port1_str> ] { <dest_port1_num> } [ <dest_port2_str> | <dest_port2_num> ] | <dest_portgrp> ] [ { <icmp_type> [ <icmp_code> ] | <icmp_str> } | { <icmpv6_type> [ <icmpv6_code> ] | <icmpv6_str> } ] [ <igmp_type> | <igmp_type_str> ] [ [ <precedence> | <precedence_str> ] [ <tos> | <tos_str> ] | [ <dscp> | <dscp_str> ] | [ <ttl> ] ] [ <log> ] [ <udfs> ] [ <capture_session> ] [ <fragments> ] [ <plen_op> <plen1> [ <plen2> ] ] [ <urg> ] [ <ack> ] [ <psh> ] [ <rst> ] [ <syn> ] [ <fin> ] [ <established> ] [ <http-method> | <http_opt_str> ] [ <tcp-option-length> ] [ <tcp-flags-mask> ] [ <flow_label> ] [ <timerange> ] [ <eth_proto> | <eth_proto_str> ] [ <vlan> ] [ <cos> ] [ <match_count> ] | [ <nve_vni> ] | <remark> [ <action> <actionid> ] } ] [ ethertype <ethertypeid> | vlan <vlanid> | ingress_intf { <intfid> | <intfname> } | vlan_priority <vlanpriorityid> ] + [ <action> <actionid> ] ]

Syntax Description

Syntax Description

show

Show running system information

name

(Optional) List name

ip_ipv6_mac

(Optional) IP/IPv6/MAC

capture

(Optional) capture

session

(Optional) session

capture_session

(Optional) session id

op_ip_ipv6_mac

(Optional) IP/IPv6/MAC

access-lists

List access lists

acl_name

(Optional) List name

__readonly__

(Optional)

TABLE_ip_ipv6_mac

(Optional)

frag_opt_permit_deny

(Optional) frag_op_type

ethertype

(Optional) Configure match based on ethertype

vlan

(Optional) Configure match based on vlan

ingress_intf

(Optional) Configure match based on ingress interface

vlan_priority

(Optional) Configure match based on priority

ethertypeid

(Optional) Configure the ethertype value

vlanid

(Optional) VLAN number

intfid

(Optional) Interface index

intfname

(Optional) Interface name

vlanpriorityid

(Optional) Vlan Priority

seqno

(Optional) Sequence number

permitdeny

(Optional) Permit/deny

proto

(Optional) A protocol number

TABLE_seqno

(Optional)

proto_str

(Optional) Protocol name

ip

(Optional) IP

ipv6

(Optional) IPV6

src_any

(Optional) SRCAny

dest_any

(Optional) DESTAny

src_ip_prefix

(Optional) Source IP prefix

src_ip_addr

(Optional) Source IP address

src_ip_mask

(Optional) Source IP mask

mac_src

(Optional) Source MAC address

mac_src_wild

(Optional) Source MAC mask

dest_ip_prefix

(Optional) Destination IP prefix

dest_ip_addr

(Optional) Destination IP address

dest_ip_mask

(Optional) Destination IP mask

mac_dest

(Optional) Destination MAC address

mac_dest_wild

(Optional) Destination MAC mask

src_port_op

(Optional) Source Port operator

dest_port_op

(Optional) Destination Port operator

src_port1_str

(Optional) Source port name

src_port1_num

(Optional) Source port number

src_port2_str

(Optional) Source port name

src_port2_num

(Optional) Source port number

dest_port1_str

(Optional) Destination port name

dest_port1_num

(Optional) Destination port number

dest_port2_str

(Optional) Destination port name

dest_port2_num

(Optional) Destination port number

icmp_type

(Optional) ICMP type

icmp_code

(Optional) ICMP code

icmp_str

(Optional) ICMP message

icmpv6_type

(Optional) ICMP type

icmpv6_code

(Optional) ICMP code

icmpv6_str

(Optional) ICMP message

igmp_type

(Optional) IGMP type

igmp_type_str

(Optional) IGMP type String

precedence

(Optional) precedence

precedence_str

(Optional) precedence string

tos

(Optional) tos

tos_str

(Optional) tos string

dscp

(Optional) dscp

dscp_str

(Optional) dscp string

udfs

(Optional) udfs string

ttl

(Optional) ttl

capture_session

(Optional) capture session

global_capture_session

(Optional) capture session

log

(Optional) Log

fragments

(Optional) Fragments

urg

(Optional) URG

ack

(Optional) ACK

psh

(Optional) PSH

rst

(Optional) RST

syn

(Optional) SYN

fin

(Optional) FIN

established

(Optional) ESTABLISHED

http-method

(Optional) http-method

http_opt_str

(Optional) http_option string

tcp-option-length

(Optional) TCP Option size

tcp-flags-mask

(Optional) TCP Flags mask

flow_label

(Optional) IPv6 flow label

timerange

(Optional) Time-range

eth_proto

(Optional) MAC protocol number

eth_proto_str

(Optional) MAC protocol name

vlan

(Optional) VLAN number

cos

(Optional) CoS value

match_count

(Optional) Number of packets matching the ACL

nve_vni

(Optional) nve vni

remark

(Optional) Remark String

statistics

(Optional) STATISTICS

src_addrgrp

(Optional) Source address group

dest_addrgrp

(Optional) Destination address group

src_portgrp

(Optional) Source port group

dest_portgrp

(Optional) Destination port group

plen_op

(Optional) Source Port operator

plen1

(Optional) Packet length minimum

plen2

(Optional) packet length maximum

action

(Optional) Action

actionid

(Optional) redirect: Ethernet1/1,port-channel1 set-erspan-dscp: <1-63> set-erspan-gre-proto: <1-65535>

expanded

(Optional) EXPANDED

summary

(Optional) SUMMARY

private

(Optional) PRIVATE

brief

(Optional) BRIEF

Command Mode

- /exec

show accounting log

show accounting log [ { <i0> | start-time <SYYYY> <SMonth> <SDate> <STime> [ end-time <EYYYY> <EMonth> <EDate> <ETime> ] } ] [ __readonly__ [ TABLE_acctlog_time <accountlog_starttime> ] ]

Syntax Description

Syntax Description

show

Show running system information

accounting

Show Accounting Information

log

Show Accounting Log

i0

(Optional) Log Size(in bytes)

start-time

(Optional) Show messages from a given start-time

SYYYY

(Optional) Enter year in YYYY format

SMonth

(Optional) Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec

SDate

(Optional) Enter day of month in dd format

STime

(Optional) Enter hour, minutes, seconds as HH:MM:SS

end-time

(Optional) Show messages from a given end-time

EYYYY

(Optional) Enter year in YYYY format

EMonth

(Optional) Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec

EDate

(Optional) Enter day of month in dd format

ETime

(Optional) Enter hour, minutes, seconds as HH:MM:SS

__readonly__

(Optional)

TABLE_acctlog_time

(Optional)

accountlog_starttime

(Optional) accounting log starttime

Command Mode

- /exec

show accounting log all

show accounting log all [ __readonly__ [ TABLE_acctlog <accountlog_all> ] ]

Syntax Description

Syntax Description

show

Show running system information

accounting

Show accounting configuration

log

Show Accounting Log

all

Display accounting log including show commands (Use <terminal log-all> to enable show command accounting)

__readonly__

(Optional)

TABLE_acctlog

(Optional)

accountlog_all

(Optional) accounting log all

Command Mode

- /exec

show accounting log last-index

show accounting log last-index [ __readonly__ { <last_index> } ]

Syntax Description

Syntax Description

show

Show running system information

accounting

Show accounting configuration

log

Show Accounting Log

last-index

Show accounting log last index information

__readonly__

(Optional)

last_index

(Optional) accounting log last index

Command Mode

- /exec

show accounting log nvram

show accounting log nvram [ { <i0> | start-time <SYYYY> <SMonth> <SDate> <STime> [ end-time <EYYYY> <EMonth> <EDate> <ETime> ] } ] [ __readonly__ [ TABLE_acctnvramlog_time <accountnvramlog_starttime> ] ]

Syntax Description

Syntax Description

show

Show running system information

accounting

Show Accounting Information

log

Show Accounting Log

nvram

present in nvram

i0

(Optional) Log Size(in bytes)

start-time

(Optional) Show messages from a given start-time

SYYYY

(Optional) Enter year in YYYY format

SMonth

(Optional) Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec

SDate

(Optional) Enter day of month in dd format

STime

(Optional) Enter hour, minutes, seconds as HH:MM:SS

end-time

(Optional) Show messages from a given end-time

EYYYY

(Optional) Enter year in YYYY format

EMonth

(Optional) Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec

EDate

(Optional) Enter day of month in dd format

ETime

(Optional) Enter hour, minutes, seconds as HH:MM:SS

__readonly__

(Optional)

TABLE_acctnvramlog_time

(Optional)

accountnvramlog_starttime

(Optional) accounting log nvram starttime

Command Mode

- /exec

show accounting log nvram last-index

show accounting log nvram last-index [ __readonly__ { <last_index> } ]

Syntax Description

Syntax Description

show

Show running system information

accounting

Show accounting configuration

log

Show Accounting Log

nvram

present in nvram

last-index

Show accounting log last index information

__readonly__

(Optional)

last_index

(Optional) accounting log last index

Command Mode

- /exec

show accounting log nvram start-seqnum

show accounting log nvram start-seqnum <SSEQNUM> [ end-seqnum <ESEQNUM> ] [ __readonly__ [ TABLE_acctnvramlog_seq <accountnvramlog_seq> ] ]

Syntax Description

Syntax Description

show

Show running system information

accounting

Show Accounting Information

log

Show Accounting Log

nvram

present in nvram

start-seqnum

Show messages starting from a given sequence number

end-seqnum

(Optional) Show messages ending with a given sequence number

SSEQNUM

Enter Starting Sequence Number

ESEQNUM

(Optional) Enter Starting Sequence Number

__readonly__

(Optional)

TABLE_acctnvramlog_seq

(Optional)

accountnvramlog_seq

(Optional) accounting log nvram seqnum

Command Mode

- /exec

show accounting log start-seqnum

show accounting log start-seqnum <SSEQNUM> [ end-seqnum <ESEQNUM> ] [ __readonly__ [ TABLE_acctlog_seq <accountlog_seq> ] ]

Syntax Description

Syntax Description

show

Show running system information

accounting

Show Accounting Information

log

Show Accounting Log

start-seqnum

Show messages starting from a given sequence number

end-seqnum

(Optional) Show messages ending with a given sequence number

SSEQNUM

Enter Starting Sequence Number

ESEQNUM

(Optional) Enter Starting Sequence Number

__readonly__

(Optional)

TABLE_acctlog_seq

(Optional)

accountlog_seq

(Optional) accounting log seqnum

Command Mode

- /exec

show acl status

show acl status [ __readonly__ [ <status_log_string> ] ]

Syntax Description

Syntax Description

show

Show running system information

acl

Show information about acl

status

Shows the status of last acl operation

__readonly__

(Optional)

status_log_string

(Optional) ppf entry string

Command Mode

- /exec

show adbm internal errors

show adbm internal [ event-history ] errors

Syntax Description

Syntax Description

show

Show running system information

adbm

Show information about adbm

internal

Show internal adbm information

event-history

(Optional) Show various event logs of Adbms

errors

Show error logs of ADBM

Command Mode

- /exec

show adbm internal info

show adbm internal info [ { global | vsan <i0> } ]

Syntax Description

Syntax Description

show

Show running system information

adbm

Show information about adbm

internal

Show internal adbm information

info

Show internal data structure information

global

(Optional) Display adbm global info

vsan

(Optional) Enter the vsan id

i0

(Optional)

Command Mode

- /exec

show adbm internal mem-stats

show adbm internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

adbm

Show information about adbm

internal

Show internal adbm information

mem-stats

Show memory allocation statistics of ADBM

detail

(Optional) Show detail memstats for F_Port Server

Command Mode

- /exec

show adbm internal msgs

show adbm internal [ event-history ] msgs

Syntax Description

Syntax Description

show

Show running system information

adbm

Show information about adbm

internal

Show internal adbm information

event-history

(Optional) Show various event logs of Adbms

msgs

Show various message logs of ADBM

Command Mode

- /exec

show adbm internal vsan

show adbm internal [ event-history ] vsan <i0>

Syntax Description

Syntax Description

show

Show running system information

adbm

Show information about adbm

internal

Show internal adbm information

event-history

(Optional) Show various event logs of Adbms

vsan

vsan id:Enter the vsan number.

i0

Enter vsan id

Command Mode

- /exec

show amt internal event-history

show amt internal event-history { errors | msgs | cli }

Syntax Description

Syntax Description

show

Show running system information

amt

AMT show commands

internal

Commands for internal use

event-history

Show various event logs of AMT

errors

Show error logs of AMT

msgs

Show various message logs of AMT

cli

Show AMT CLI related events

Command Mode

- /exec

show amt internal library-info

show amt internal library-info

Syntax Description

Syntax Description

show

Show running system information

amt

AMT show commands

internal

Commands for internal use

library-info

Show various event logs of library

Command Mode

- /exec

show amt process

show amt process [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ TABLE_vrf <vrf> <pid> <uuid> <q> <re4> <ge4> <re6> <ge6> <pi4> <ar4> <ag4> <ra4> <ga4> <dra4> <pi6> <ar6> <ag6> <ra6> <ga6> <dra6> <qqic4> <tc4> <tl4> <rc4> <rl4> <jp4> <qqic6> <tc6> <tl6> <rc6> <rl6> <jp6> <grm4> <gjp4> <gslp4> <gsl4> <grm6> <gjp6> <gslp6> <gsl6> ]

Syntax Description

Syntax Description

show

Show running system information

amt

AMT show commands

vrf

(Optional) Display information for VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

process

Display AMT process information

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

pid

(Optional)

uuid

(Optional)

q

(Optional)

re4

(Optional)

ge4

(Optional)

re6

(Optional)

ge6

(Optional)

pi4

(Optional)

ar4

(Optional)

ag4

(Optional)

ra4

(Optional)

ga4

(Optional)

dra4

(Optional)

pi6

(Optional)

qqic4

(Optional)

tc4

(Optional)

tl4

(Optional)

rc4

(Optional)

rl4

(Optional)

jp4

(Optional)

qqic6

(Optional)

tc6

(Optional)

tl6

(Optional)

rc6

(Optional)

rl6

(Optional)

jp6

(Optional)

grm4

(Optional)

gjp4

(Optional)

gslp4

(Optional)

gsl4

(Optional)

grm6

(Optional)

gjp6

(Optional)

gslp6

(Optional)

gsl6

(Optional)

Command Mode

- /exec

show amt vrf all

show amt vrf all [ __readonly__ TABLE_vrf <vrf> <cid> <ip_tid> <ipv6_tid> ]

Syntax Description

Syntax Description

show

Show running system information

amt

AMT show commands

vrf

Display all VRFs AMT is configured in

all

Display all VRFs AMT is configured in

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

cid

(Optional)

ip_tid

(Optional)

ipv6_tid

(Optional)

Command Mode

- /exec

show archive log config all

show archive log config { all | user <username> [ first-index <first_index> [ last-index <last_index> ] ] }

Syntax Description

Syntax Description

show

Show running system information

archive

Show archive configuration

log

Show Archive Log

config

Show Config Logger information

all

List all the records in the config log

user

List records for specific user in the config log

username

Username

first-index

(Optional) The first record number to display

last-index

(Optional) The last record number to display

first_index

(Optional) config log first index

last_index

(Optional) config log last index

Command Mode

- /exec

show arp access-lists

show arp access-lists [ <name> ] [ __readonly__ TABLE_arp <arp_name> [ TABLE_seqno <seqno> { <permitdeny> <reqresp> ip { { <sender_ip_any> | { { <sender_host> <sender_ip> | { <sender_net_ip> <sender_ip_mask> } } } } [ { <target_ip_any> | { { <target_host> <target_ip> | { <target_net_ip> <target_ip_mask> } } } } ] } mac { { <sender_mac_any> | { { <sender_mac_host> <sender_mac> | { <sender_net_mac> <sender_mac_mask> } } } } [ { <target_mac_any> | { { <target_mac_host> <target_mac> | { <target_net_mac> <target_mac_mask> } } } } ] } [ <arp_log> ] } | <remark> ] ] [ capture session <session-id> ]

Syntax Description

Syntax Description

show

Show running system information

arp

ARP access-lists

access-lists

List access lists

name

(Optional) List name

__readonly__

(Optional)

arp_name

(Optional) Name of the ARP ACL

seqno

(Optional) Sequence number

permitdeny

(Optional) Permit/deny

ip

(Optional) Any IP protocol

TABLE_arp

(Optional)

TABLE_seqno

(Optional)

reqresp

(Optional) ARP_Request

sender_ip_any

(Optional) Any

sender_host

(Optional) Host

sender_ip

(Optional) IP address <a.b.c.d>

sender_net_ip

(Optional) IP address <a.b.c.d>

sender_ip_mask

(Optional) IP mask <a.b.c.d>

target_ip_any

(Optional) Any

target_host

(Optional) Host

target_ip

(Optional) IP address <a.b.c.d>

target_net_ip

(Optional) IP address <a.b.c.d>

target_ip_mask

(Optional) IP mask <a.b.c.d>

mac

(Optional) MAC configuration commands

sender_mac_any

(Optional) Any

sender_mac_host

(Optional) Host

sender_mac

(Optional) MAC address EEEE.EEEE.EEEE

sender_net_mac

(Optional) MAC address EEEE.EEEE.EEEE

sender_mac_mask

(Optional) MAC mask EEEE.EEEE.EEEE

target_mac_any

(Optional) Any

target_mac_host

(Optional) Host

target_mac

(Optional) MAC address EEEE.EEEE.EEEE

target_net_mac

(Optional) MAC address EEEE.EEEE.EEEE

target_mac_mask

(Optional) MAC mask EEEE.EEEE.EEEE

remark

(Optional) Remark String

arp_log

(Optional) Log

capture

(Optional) Enable packet capture on this filter for session

session

(Optional) Session ID <1-48> for this session

session-id

(Optional) Session ID <1-48> for this session

Command Mode

- /exec

Chapter 3. B Show Commands

- show background

- show banner motd

- show bash-shell

- show bfd-app session status

- show bfd addrmap

- show bfd clients

- show bfd discrmap

- show bfd intfipmap

- show bfd neighbors

- show bfd scalar

- show bfd session

- show bgp

- show bgp

- show bgp

- show bgp

- show bgp

- show bgp

- show bgp

- show bgp bmp server

- show bgp community

- show bgp convergence

- show bgp convergence private

- show bgp dampening dampened

- show bgp dampening flap-statistics

- show bgp dampening parameters

- show bgp default-info

- show bgp event-history

- show bgp extcommunity

- show bgp internal

- show bgp internal ead_es_cfg

- show bgp internal epe

- show bgp internal evi

- show bgp internal interface

- show bgp internal library-info

- show bgp internal lslib

- show bgp internal mem-stats

- show bgp internal pss

- show bgp internal rpc

- show bgp internal statistics

- show bgp l3vpn

- show bgp neighbors

- show bgp neighbors

- show bgp neighbors commands

- show bgp neighbors flap-statistics

- show bgp neighbors paths

- show bgp paths

- show bgp peer-template

- show bgp peer

- show bgp prefix-list

- show bgp private

- show bgp private attr

- show bgp private damp

- show bgp private debug history

- show bgp process

- show bgp received-paths

- show bgp regexp

- show bgp self-originated

- show bgp sessions

- show bgp statistics

- show bgp summary

- show bgp summary

- show boot

- show boot auto-copy

- show boot auto-copy list

- show boot current

- show boot mode

- show boot module

- show boot order

- show boot sup-1

- show boot sup-2

- show boot timings

- show boot variables

- show bootmode

- show buffers ip

show background

show background

Syntax Description

Syntax Description

show

Show running system information

background

show background processes (started with 'source background <file>' command)

Command Mode

- /exec

show banner motd

show banner motd [ __readonly__ { banner_msg <b_msg> } ]

Syntax Description

Syntax Description

show

Show running system information

banner

Show current motd banner message

motd

Show current motd banner message

__readonly__

(Optional)

banner_msg

(Optional) The banner message

b_msg

(Optional) The banner message

Command Mode

- /exec

show bash-shell

show bash-shell [ __readonly__ { operation_status <o_status> } ]

Syntax Description

Syntax Description

show

Show running system information

bash-shell

Show bash shell status

__readonly__

(Optional)

operation_status

(Optional) Bash shell status

o_status

(Optional) operational status of bash shell

Command Mode

- /exec

show bfd-app session status

show bfd-app session status { src-ip { <src_ip> dest-ip <dest_ip> | <src_ipv6> dest-ip <dest_ipv6> } { iod <iod_id> | intf <intf_id> } | <all> }

Syntax Description

Syntax Description

show

Show running system information

bfd-app

BFD application commands

session

session operation

src-ip

Source ip

src_ip

Source ip value

dest-ip

Destination ip

dest_ip

Destination ip value

iod

interface iod

iod_id

Interface iod in hex

intf

interface

intf_id

Interface Id

status

status of sessions

all

All sessions

Command Mode

- /exec

show bfd addrmap

show bfd addrmap [ application <appid> discriminator <discr> address-type <addrtype> address <addr> ] [ __readonly__ TABLE_bfdSessMapTable <ciscoBfdSessApplicationId> <ciscoBfdSessDiscriminator> <ciscoBfdSessAddrType> <ciscoBfdSessAddr> <ciscoBfdSessMapBfdIndex> ]

Syntax Description

Syntax Description

show

Show running system information

bfd

BFD commands

addrmap

Session

application

(Optional)

discriminator

(Optional)

address-type

(Optional)

address

(Optional)

appid

(Optional)

discr

(Optional)

addrtype

(Optional)

addr

(Optional)

__readonly__

(Optional)

TABLE_bfdSessMapTable

(Optional) Address Map table

ciscoBfdSessApplicationId

(Optional)

ciscoBfdSessDiscriminator

(Optional)

ciscoBfdSessAddrType

(Optional)

ciscoBfdSessAddr

(Optional)

ciscoBfdSessMapBfdIndex

(Optional)

Command Mode

- /exec

show bfd clients

show bfd clients [ __readonly__ <header> TABLE-bfdClients <client_name> <num_sess> ]

Syntax Description

Syntax Description

show

Show running system information

bfd

BFD commands

clients

bfd client list

__readonly__

(Optional)

header

(Optional) print header

TABLE-bfdClients

(Optional) BFD Client table

client_name

(Optional) client name

num_sess

(Optional) Number of sessions

Command Mode

- /exec

show bfd discrmap

show bfd discrmap [ <discr> ] [ __readonly__ TABLE_bfdDiscMapTable <ciscoBfdSessDiscMapIndex> ]

Syntax Description

Syntax Description

show

Show running system information

bfd

BFD commands

discrmap

Session

discr

(Optional)

__readonly__

(Optional)

TABLE_bfdDiscMapTable

(Optional) Discriminator map table

ciscoBfdSessDiscMapIndex

(Optional)

Command Mode

- /exec

show bfd intfipmap

show bfd intfipmap [ interface <intf> address-type <addrtype> address <addr> ] [ __readonly__ TABLE_ipMapTable <ciscoBfdSessInterface> <ciscoBfdSessAddrType> <ciscoBfdSessAddr> <ciscoBfdSessIpMapIndex> ]

Syntax Description

Syntax Description

show

Show running system information

bfd

BFD commands

intfipmap

Session

interface

(Optional)

address-type

(Optional)

address

(Optional)

intf

(Optional)

addrtype

(Optional)

addr

(Optional)

__readonly__

(Optional)

TABLE_ipMapTable

(Optional) ip map table

ciscoBfdSessInterface

(Optional)

ciscoBfdSessAddrType

(Optional)

ciscoBfdSessAddr

(Optional)

ciscoBfdSessIpMapIndex

(Optional)

Command Mode

- /exec

show bfd neighbors

show bfd { [ vrf { <vrf-name> | <vrf-known-name> | all } ] } { [ <ip_type> ] } neighbors { [ module <module_no> ] | [ interface <intf_id> ] | [ application <bfd_cli_client_names> ] | [ { src-ip <src_ip> | src-ipv6 <src_ipv6> } ] | [ { dest-ip <dest_ip> | dest-ipv6 <dest_ipv6> } ] | [ vrf { <vrf-name> | <vrf-known-name> | all } ] } + [ details ] [ __readonly__ TABLE_bfdNeighbor <local_disc> [ <header> ] [ <vrf_name> ] [ <src_ip_addr> ] [ <src_ipv6_addr> ] [ <dest_ip_addr> ] [ <dest_ipv6_addr> ] [ <remote_disc> ] [ <local_state> ] [ <remote_state> ] [ <holddown> ] [ <cur_detect_mult> ] [ <intf> ] [ <echo> ] [ <echo_tx> ] [ <local_diag> ] [ <demand> ] [ <poll> ] [ <min_tx> ] [ <min_rx> ] [ <local_multi> ] [ <dectect_timer> ] [ <down_count> ] [ <tx_interval> ] [ <rx_count> ] [ <rx_avg> ] [ <rx_min> ] [ <rx_max> ] [ <last_rx> ] [ <tx_count> ] [ <tx_avg> ] [ <tx_min> ] [ <tx_max> ] [ <last_tx> ] [ <app> ] [ <up_time> ] [ <version> ] [ <diag> ] [ <state_bit> ] [ <demand_bit> ] [ <poll_bit> ] [ <final_bit> ] [ <multiplier> ] [ <length> ] [ <my_disc> ] [ <your_disc> ] [ <min_tx_interval> ] [ <req_min_rx> ] [ <min_echo_interval> ] [ <out_str> ] [ <host_lc> ] [ <down_reason> ] [ <no_host_reason> ] [ <parent> ] [ <per_link_str> ] [ <auth> ] [ <auth_bit> ] [ <print_details> ] ]

Syntax Description

Syntax Description

show

Show running system information

bfd

BFD commands

ip_type

(Optional) ipv4 or ipv6

neighbors

neighbors

module

(Optional) module

module_no

(Optional) module number

interface

(Optional) interface

intf_id

(Optional) show bfd sessions based on interface id

application

(Optional) application

bfd_cli_client_names

(Optional) __nil__ Clients need to register with bfd for this list

src-ip

(Optional) Source ip

src-ipv6

(Optional) Source ip

src_ip

(Optional) Source ip value

dest-ip

(Optional) Destination ip

dest-ipv6

(Optional) Destination ip

dest_ip

(Optional) Destination ip value

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

details

(Optional) details

__readonly__

(Optional)

TABLE_bfdNeighbor

(Optional) BFD Neighbor table

header

(Optional) Header

vrf_name

(Optional) vrf name

src_ip_addr

(Optional) Source IPV4 address

dest_ip_addr

(Optional) Destination IPV4 address

local_disc

(Optional) Local Discriminator

remote_disc

(Optional) Remote Discriminator

local_state

(Optional) Local State

remote_state

(Optional) Remote State

holddown

(Optional) Hold Down Time

cur_detect_mult

(Optional) Current Detection Multiplier

intf

(Optional) Interface

echo

(Optional) Echo enabled

echo_tx

(Optional) Echo Tx Interval

local_diag

(Optional) Local Diag

demand

(Optional) Demand Mode

poll

(Optional) Poll Bit

min_tx

(Optional) Local Min Tx Interval

min_rx

(Optional) Local Min Rx Interval

local_multi

(Optional) Local Detection Multiplier

dectect_timer

(Optional) Current Detection Timer

down_count

(Optional) Session Down Count

tx_interval

(Optional) Tx Interval

rx_count

(Optional) Tx Count

rx_avg

(Optional) Rx Interval Avg

rx_min

(Optional) Rx Interval Min

rx_max

(Optional) Rx Interval Max

last_rx

(Optional) Last Rx time

tx_count

(Optional) Tx Count

tx_avg

(Optional) Tx Interval Avg

tx_min

(Optional) Tx Interval Min

tx_max

(Optional) Tx Interval Max

last_tx

(Optional) Last Tx time

app

(Optional) App name

up_time

(Optional) Up time

version

(Optional) Version in Last Packet

diag

(Optional) diag in Last Packet

state_bit

(Optional) State Bit in Last Packet

demand_bit

(Optional) Demand Bit in Last Packet

poll_bit

(Optional) Poll Bit in Last Packet

final_bit

(Optional) Final Bit in Last Packet

multiplier

(Optional) Detection Multiplier in Last Packet

length

(Optional) Length in Last Packet

my_disc

(Optional) My Discriminator in Last Packet

your_disc

(Optional) Your Discriminator in Last Packet

min_tx_interval

(Optional) Min Tx Interval in Last Packet

req_min_rx

(Optional) Required Rx Interval in Last Packet

min_echo_interval

(Optional) Min Echo Interval in Last Packet

out_str

(Optional) No Host LC string

parent

(Optional) Parent Session

per_link_str

(Optional) Per Link string

host_lc

(Optional) Host LC

down_reason

(Optional) Session Down Reason

no_host_reason

(Optional) Not Hosted Reason

auth

(Optional) Authentication Mode

auth_bit

(Optional) Auth Bit in Last Packet

print_details

(Optional) print details

Command Mode

- /exec

show bfd scalar

show bfd scalar [ __readonly__ <adminStatus> <version> <notifEnable> ]

Syntax Description

Syntax Description

show

Show running system information

bfd

BFD commands

scalar

bfd mib scalars

__readonly__

(Optional)

adminStatus

(Optional) bfd admin status

version

(Optional) bfd version number

notifEnable

(Optional) Enable bfd traps

Command Mode

- /exec

show bfd session

show bfd session { [ discriminator <sessionIndex> ] | [ interface <intf_id> ] | [ application <app_name> ] | [ src-ip <src_ip> ] | [ dest-ip <dest_ip> ] | [ vrf { <vrf-name> | <vrf-known-name> | all } ] } + [ __readonly__ <vrf_name_header> TABLE_bfdSessTable <ciscoBfdSessIndex> <isMember> <ciscoBfdSessApplicationId> <ciscoBfdSessDiscriminator> <ciscoBfdSessRemoteDiscr> <ciscoBfdSessUdpPort> <ciscoBfdSessState> <remoteBfdSessState> <ciscoBfdSessRemoteHeardFlag> <ciscoBfdSessDiag> <remoteBfdSessDiag> <ciscoBfdSessOperMode> <ciscoBfdSessDemandModeDesiredFlag> <ciscoBfdSessEchoFuncModeDesiredFlag> <ciscoBfdSessControlPlanIndepFlag> <ciscoBfdSessAddrType> <ciscoBfdSessAddr> <localBfdSessAddr> <ciscoBfdSessDesiredMinTxInterval> <ciscoBfdSessReqMinRxInterval> <ciscoBfdSessReqMinEchoRxInterval> <ciscoBfdSessDetectMult> <remoteBfdSessDesiredMinTxInterval> <remoteBfdSessReqMinRxInterval> <remoteBfdSessReqMinEchoRxInterval> <remoteBfdSessDetectMult> <ciscoBfdSessStorType> <ciscoBfdSessRowStatus> <ciscoBfdSessAuthPresFlag> <ciscoBfdSessAuthenticationType> <ciscoBfdSessVersionNumber> <ciscoBfdSessType> <ciscoBfdSessInterface> <ciscoBfdSessPerfPktIn> <ciscoBfdSessPerfPktOut> <ciscoBfdSessUpTime> <ciscoBfdSessPerfLastSessDownTime> <ciscoBfdSessPerfLastCommLostDiag> <ciscoBfdSessPerfSessUpCount> <ciscoBfdSessPerfDiscTime> <ciscoBfdSessPerfPktInHC> <ciscoBfdSessPerfPktOutHC> <effasyncdt> <effechodt> ]

Syntax Description

Syntax Description

show

Show running system information

bfd

BFD commands

session

Session

discriminator

(Optional) Session local discriminator

sessionIndex

(Optional)

interface

(Optional) interface

intf_id

(Optional) show bfd sessions based on interface id

application

(Optional) application

app_name

(Optional) show bfd session based on application name

src-ip

(Optional) Source ip

src_ip

(Optional) Source ip value

dest-ip

(Optional) Destination ip

dest_ip

(Optional) Destination ip value

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

vrf_name_header

(Optional)

TABLE_bfdSessTable

(Optional) BFD Session table

ciscoBfdSessIndex

(Optional)

isMember

(Optional)

ciscoBfdSessApplicationId

(Optional)

ciscoBfdSessDiscriminator

(Optional)

ciscoBfdSessRemoteDiscr

(Optional)

ciscoBfdSessUdpPort

(Optional)

ciscoBfdSessState

(Optional) Session state

remoteBfdSessState

(Optional) Session state

ciscoBfdSessRemoteHeardFlag

(Optional)

ciscoBfdSessDiag

(Optional) Session diagnostic code

remoteBfdSessDiag

(Optional) Session diagnostic code

ciscoBfdSessOperMode

(Optional) ciscoBfdSessOperMode

ciscoBfdSessDemandModeDesiredFlag

(Optional)

ciscoBfdSessEchoFuncModeDesiredFlag

(Optional)

ciscoBfdSessControlPlanIndepFlag

(Optional)

ciscoBfdSessAddrType

(Optional) ciscoBfdSessAddrType

localBfdSessAddr

(Optional)

ciscoBfdSessAddr

(Optional)

ciscoBfdSessDesiredMinTxInterval

(Optional)

ciscoBfdSessReqMinRxInterval

(Optional)

ciscoBfdSessReqMinEchoRxInterval

(Optional)

ciscoBfdSessDetectMult

(Optional)

remoteBfdSessDesiredMinTxInterval

(Optional)

remoteBfdSessReqMinRxInterval

(Optional)

remoteBfdSessReqMinEchoRxInterval

(Optional)

remoteBfdSessDetectMult

(Optional)

ciscoBfdSessStorType

(Optional) ciscoBfdSessStorType

ciscoBfdSessRowStatus

(Optional)

ciscoBfdSessAuthPresFlag

(Optional)

ciscoBfdSessAuthenticationType

(Optional) ciscoBfdSessAuthenticationType

ciscoBfdSessVersionNumber

(Optional)

ciscoBfdSessType

(Optional) ciscoBfdSessType

ciscoBfdSessInterface

(Optional)

ciscoBfdSessPerfPktIn

(Optional)

ciscoBfdSessPerfPktOut

(Optional)

ciscoBfdSessUpTime

(Optional)

ciscoBfdSessPerfLastSessDownTime

(Optional)

ciscoBfdSessPerfLastCommLostDiag

(Optional)

ciscoBfdSessPerfSessUpCount

(Optional)

ciscoBfdSessPerfDiscTime

(Optional)

ciscoBfdSessPerfPktInHC

(Optional)

ciscoBfdSessPerfPktOutHC

(Optional)

effasyncdt

(Optional)

effechodt

(Optional)

Command Mode

- /exec

show bgp

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } policy statistics { { redistribute [ { { eigrp | isis | ospf | rip } <tag> } | static | direct | amt | lisp | hmm | am ] } | { neighbor <neighbor-id> [ default-originate | { route-map | filter-list | prefix-list } { in | out } ] } | { dampening } | { network { <ip-addr> mask <ip-mask> | <ip-prefix> } } | { aggregate-address { <ip-addr> <ip-mask> | <ip-prefix> } { suppress-map | advertise-map } } } | vpnv4 unicast policy statistics { neighbor <neighbor-id> [ { route-map | filter-list | prefix-list } { in | out } ] } | ipv6 { unicast | multicast } policy statistics { { redistribute [ { { eigrp | isis | ospfv3 | rip } <tag> } | static | direct | amt | lisp | hmm | am ] } | { neighbor { <neighbor-id> | <ipv6-neighbor-id> } [ default-originate | { route-map | filter-list | prefix-list } { in | out } ] } | { dampening } | { network <ipv6-prefix> } | { aggregate-address <ipv6-prefix> { suppress-map | advertise-map } } } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-polstats> [ <rpm-handle-count> ] [ { TABLE_rmap <name> <action> <seqnum> [ { TABLE_cmd <command> <comparecount> <matchcount> } ] [ <totalacceptcount> ] [ <totalrejectcount> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

policy

Display policy related information

statistics

Display Route Filter statistics

redistribute

Statistics for redistribution

isis

(Optional) ISO IS-IS

ospf

(Optional) Open Shortest Path First

ospfv3

(Optional) Open Shortest Path First v3

rip

(Optional) Routing Information Protocol

eigrp

(Optional) Enhanced Interior Gateway Protocol

static

(Optional) Static routes

direct

(Optional) Directly connected

amt

(Optional) AMT anycast prefix

lisp

(Optional) LISP EID-prefixes in the non-default VRF

hmm

(Optional) HMM prefix

am

(Optional) AM routes (learned via ARP)

tag

(Optional) Source protocol tag

neighbor

Show neighbor specific counters

neighbor-id

Neighbor IPv4 address

route-map

(Optional) Neighbor route-map

prefix-list

(Optional) Neighbor prefix-list

filter-list

(Optional) Neighbor filter-list

out

(Optional) Outbound policy

in

(Optional) Inbound policy

default-originate

(Optional) Default-originate policy

dampening

Show dampening info

network

Configured IP prefix to advertise

mask

Configured mask of the IP prefix advertised

aggregate-address

Configured BGP aggregate prefixes

suppress-map

Statistics of suppress policy

advertise-map

Statistics of advertise policy

ip-addr

IP network advertised

ip-mask

Dotted 4-octet mask

ip-prefix

IP prefix in CIDR format

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-polstats

(Optional)

rpm-handle-count

(Optional)

TABLE_rmap

(Optional)

name

(Optional)

action

(Optional)

seqnum

(Optional)

TABLE_cmd

(Optional)

command

(Optional)

comparecount

(Optional)

matchcount

(Optional)

totalacceptcount

(Optional)

totalrejectcount

(Optional)

Command Mode

- /exec

show bgp

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { { ip | ipv4 } { unicast | multicast } | vpnv4 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 labeled-unicast } [ <ip-addr> [ <ip-mask> [ longer-prefixes ] ] | <ip-prefix> [ longer-prefixes ] | labels | exported | imported ] | { ipv6 { unicast | multicast } | vpnv6 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 labeled-unicast } [ <ipv6-prefix> [ longer-prefixes ] | labels | exported | imported ] | { ipv4 mdt [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] } [ <ip-addr> [ <ip-mask> ] | <ip-prefix> | labels | mdt-group <mdt-group> ] | { ipv4 | ipv6 } unicast [ injected-routes ] | link-state [ route-type <rt-type> | <ipv4-ls-rt> | <ipv6-ls-rt> ] | l2vpn vpls [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } [ { <ip-addr> [ <ip-mask> ] | <ip-prefix> } | { ve-id <ve-id> block-offset <ve-bs> } ] ] | ipv4 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } [ join <v4src-addr> <v4grp-addr> <src-asn> | rp <v4src-addr> <grp-v4prefix> <pe-addr> <rp-flags> <rp-priority> <hashlen> | sa <grp-v4prefix> ] ] | ipv6 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } [ join <v6src-addr> <v6grp-addr> <src-asn> | rp <v6src-addr> <grp-v6prefix> <pe-addr> <rp-flags> <rp-priority> <hashlen> | sa <grp-v6prefix> ] ] | l2vpn evpn [ route-type <rtype> [ etid <et> ] | rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } [ route-type <rtype> [ etid <et> ] | <ipv4-evpn-rt> | <ipv6-evpn-rt> | <mac-address> ] | vni-id <vni_id> [ route-type <rtype> ] | es <es-id> [ route-type <rtype> [ etid <et> ] ] | <ipv4-evpn-rt> | <ipv6-evpn-rt> | <mac-address> ] | all } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <metric> <localpref> <weight> <aspath> <origin> } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> ] [ <inlabel> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid_flag> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ip-addr

(Optional) Display one particular network from the BRIB in detail

ip-mask

(Optional) Mask for one particular prefix in the BRIB

ip-prefix

(Optional) Display one particular prefix from the BRIB in detail

longer-prefixes

(Optional) Display route and more specific routes

labels

(Optional) Display BGP labels for prefixes

exported

(Optional) Display only exported prefixes

imported

(Optional) Display only imported prefixes

injected-routes

(Optional) Display only injected prefixes

mdt-group

(Optional) Display prefixes with MDT group address

mdt-group

(Optional) MDT group address

rd

(Optional) Display information for a route distinguisher

ve-id

(Optional) VPLS VE ID

ve-id

(Optional) VPLS VE ID

route-type

(Optional) EVPN Route Type number

rtype

(Optional) EVPN route type number

vni-id

(Optional) EVPN VNI ID number

vni_id

(Optional) EVPN VNI ID number

rt-type

(Optional) Link-State route-type

es

(Optional) Ethernet Segment

es-id

(Optional) ESID

etid

(Optional) Ethernet Tag-ID for L2VPN EVPN route

et

(Optional) Ethernet Tag-ID

ipv4-evpn-rt

(Optional) EVPN IPv4 address

ipv4-ls-rt

(Optional) Link-State NLRI with descriptor including IPv4 address

mac-address

(Optional) MAC address

block-offset

(Optional) VPLS VE Block offset

ve-bs

(Optional) VPLS VE Block offset

ext-comm-rd-aa4nn2

(Optional) VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

(Optional) VPN route distinguisher in aa:nn format

ipv4

Display BGP information for IPv4 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

ip

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

mdt

Display BGP information for multicast distribution tree

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

labeled-unicast

Display BGP information for labeled-unicast address family

mvpn

Display BGP information for MVPN address family

l2vpn

Display BGP information for L2VPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

join

(Optional) Display Multicast Join route

sa

(Optional) Display Multicast Source Active AD route

rp

(Optional) Display Multicast Group to RP route

v4src-addr

(Optional) Source IP Address

src-asn

(Optional) Source ASN

v4grp-addr

(Optional) Group IP Address

grp-v4prefix

(Optional) Group IP prefix

pe-addr

(Optional) PE IP Address

rp-flags

(Optional) Flags

rp-priority

(Optional) RP Priority

hashlen

(Optional) Hash mask length

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

inlabel

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_v6sid_flag

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv4 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv6 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 labeled-unicast | link-state | l2vpn vpls [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | l2vpn evpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 labeled-unicast | all } { route-map { <rmap-name> | <rmap-name> } | filter-list { <fltrlist-name> | <test_pol_name> } | { community-list { <commlist-name> | <test_pol_name> } | extcommunity-list { <extcommlist-name> | <test_pol_name> } } [ exact-match ] } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <metric> <localpref> <weight> <aspath> <origin> } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> ] [ <inlabel> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid_flag> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

route-map

Display routes matching the route-map

rmap-name

Route-map name

rmap-name

Known route-map name

filter-list

Display routes matching the filter-list

fltrlist-name

Name of filter-list

community-list

Display routes matching the community-list

commlist-name

Name of community-list

extcommunity-list

Display routes matching the extcommunity-list

extcommlist-name

Name of extcommunity-list

test_pol_name

An existing test-list policy

rd

(Optional) Display information for a route distinguisher

ext-comm-rd-aa4nn2

(Optional) VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

(Optional) VPN route distinguisher in aa:nn format

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

mdt

Display BGP information for multicast distribution tree

labeled-unicast

Display BGP information for labeled-unicast address family

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

mvpn

Display BGP information for MVPN address family

l2vpn

Display BGP information for L2VPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

exact-match

(Optional) Exact match of the communities

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

inlabel

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_v6sid_flag

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | all } { rib-install | rib-uninstall | rib-pending } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

rib-install

Routes installed in RIB

rib-uninstall

Routes not installed in RIB

rib-pending

Routes not acknowledged by RIB

Command Mode

- /exec

show bgp

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { { ip | ipv4 } { unicast | multicast } | ipv4 mdt [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv4 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | link-state | l2vpn vpls [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | l2vpn evpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 labeled-unicast } nexthop <ipnexthop> | { ipv6 { unicast | multicast } | vpnv6 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 labeled-unicast | ipv6 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] } nexthop <ipv6nexthop> } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <metric> <localpref> <weight> <aspath> <origin> } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> ] [ <inlabel> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid_flag> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

rd

(Optional) Display information for a route distinguisher

ext-comm-rd-aa4nn2

(Optional) VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

(Optional) VPN route distinguisher in aa:nn format

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

nexthop

Display routes matching the nexthop

ipnexthop

Nexthop address

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

mdt

Display BGP information for multicast distribution tree

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

l2vpn

Display BGP information for L2VPN address family

evpn

Display BGP information for L2VPN EVPN address family

mvpn

Display BGP information for MVPN address family

labeled-unicast

Display BGP information for labeled-unicast address family

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

inlabel

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_v6sid_flag

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { { { ip | ipv4 } { unicast | multicast } | vpnv4 unicast | ipv4 mdt | link-state | l2vpn vpls | l2vpn evpn | ipv4 mvpn } nexthop-database [ <ipnexthop> ] } | { { ipv6 { unicast | multicast } | vpnv6 unicast | ipv6 mvpn } nexthop-database [ <ipv6nexthop> ] } | { all nexthop-database } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_nhvrf <nhvrf-name-out> TABLE_nhafi <nhafi> TABLE_nhsafi <nhsafi> <af-name> <nhcriticaldelay> <nhnoncriticaldelay> [ { TABLE_nexthop { <ipnexthop-out> | <ipv6nexthop-out> } <refcount> <igpmetric> <igptype> <igppref> [ { TABLE_attachedhops { <attachedhop> | <ipv6attachedhop> } <interface> [ { TABLE_labels <index> <label> } ] } ] <attached> <local> <reachable> <labeled> <filtered> <resolvetime> { <ribroute> | <ipv6ribroute> } { <pendingupdate> | <pendingtime> } <nextadvertise> <rnhepoch> [ <pendingrnhepoch> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

nexthop-database

Display nexthop database

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

mdt

Display BGP information for multicast distribution tree

mvpn

Display BGP information for MVPN address family

l2vpn

Display BGP information for L2VPN address family

evpn

Display BGP information for L2VPN EVPN address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

ipnexthop

(Optional) Nexthop address

__readonly__

(Optional)

TABLE_nhvrf

(Optional)

nhvrf-name-out

(Optional)

TABLE_nhafi

(Optional)

nhafi

(Optional)

TABLE_nhsafi

(Optional)

nhsafi

(Optional)

af-name

(Optional)

nhcriticaldelay

(Optional)

nhnoncriticaldelay

(Optional)

TABLE_nexthop

(Optional)

ipnexthop-out

(Optional)

refcount

(Optional)

igpmetric

(Optional)

igptype

(Optional)

igppref

(Optional)

TABLE_attachedhops

(Optional)

attachedhop

(Optional)

interface

(Optional)

TABLE_labels

(Optional)

index

(Optional)

label

(Optional)

attached

(Optional)

local

(Optional)

reachable

(Optional)

labeled

(Optional)

filtered

(Optional)

resolvetime

(Optional)

pendingupdate

(Optional)

pendingtime

(Optional)

ribroute

(Optional)

nextadvertise

(Optional)

rnhepoch

(Optional)

pendingrnhepoch

(Optional)

Command Mode

- /exec

show bgp

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } flap-statistics [ <ip-prefix> | <ip-addr> [ <ip-mask> ] ] | ipv6 { unicast | multicast } flap-statistics [ <ipv6-prefix> ] | all flap-statistics } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ <dampeningenabled> <historypaths> <dampenedpaths> ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <status> ] [ <pathtype> ] [ <peer> | <ipv6peer> ] [ <flapcount> ] [ <duration> ] [ <reuse> ] [ <penalty> ] [ <suppresslimit> ] [ <reuselimit> ] [ <best> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

flap-statistics

Display route flap statistics

ip-prefix

(Optional) Display flap statistics for one prefix

ip-addr

(Optional) Display flap statistics for one network

ip-mask

(Optional) Network mask

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

dampeningenabled

(Optional)

historypaths

(Optional)

dampenedpaths

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

status

(Optional)

best

(Optional)

pathtype

(Optional)

peer

(Optional)

flapcount

(Optional)

duration

(Optional)

reuse

(Optional)

penalty

(Optional)

suppresslimit

(Optional)

reuselimit

(Optional)

Command Mode

- /exec

show bgp bmp server

show bgp bmp server [ <server-id> ] [ detail ] [ __readonly__ { system_name <sys_name> } { system_description <sys_description> } [ { TABLE_servers <server_id> <server_addr> <port> <admin_state> <oper_state> [ <description> ] <vrf> [ <update_src> ] <initial_delay> <refresh_interval> <stats_interval> [ { <initiation> <termination> <peer_up> <peer_down> <route_monitor> <route_mirror> <stats> <messages_dropped> } ] [ <monitored_peers> ] [ { TABLE_peer <peer_addr> [ { <refresh_interval> <peer_up> <peer_down> <route_monitor> <route_mirror> <stats> <messages_dropped> } ] [ <prefixes_denied> <dup_pfx_advmnt> <pfx_dup_wdr_count> <cluster_list_loops> <as_path_loops> <as_confed_loops> <invalid_originator> <adj_rib_in> <loc-rib> ] } ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

bmp

Display BMP state

server

Display BMP server information

server-id

(Optional) Display server specific information

detail

(Optional) Display detailed information

__readonly__

(Optional)

system_name

(Optional) bmp-server global information

sys_name

(Optional) system name

system_description

(Optional) bmp-server global information

sys_description

(Optional) system description

TABLE_servers

(Optional) all bmp servers

server_id

(Optional) server id number of bmp server

server_addr

(Optional) ip address of the bmp server

port

(Optional) port number of the bmp server

admin_state

(Optional) administrative status of bmp server

oper_state

(Optional) operational status of bmp server

description

(Optional) description for bmp server

vrf

(Optional) vrf context for bmp server

update_src

(Optional) updated source for bmp server

initial_delay

(Optional) initial delay for bmp server

refresh_interval

(Optional) refresh delay for bmp server

stats_interval

(Optional) frequency of stat updates

initiation

(Optional) number of initiation messages

termination

(Optional) number of termination messages

peer_up

(Optional) number of peer up messages

peer_down

(Optional) number of peer down messages

route_monitor

(Optional) number of route monitor messages

route_mirror

(Optional) number of route mirror messages

stats

(Optional) number of stats messages

messages_dropped

(Optional) number of dropped messages

monitored_peers

(Optional) number of monitored peers for the bmp server

TABLE_peer

(Optional) monitored peer for the bmp server

peer_addr

(Optional) ip address of the peer

refresh_interval

(Optional) refresh delay for the peer

peer_up

(Optional) number of peer up messages for the peer

peer_down

(Optional) number of peer down messages for the peer

route_monitor

(Optional) number of route monitor messages for the peer

route_mirror

(Optional) number of route mirror messages for the peer

stats

(Optional) number of stats messages for the peer

messages_dropped

(Optional) number of dropped messages for the peer

prefixes_denied

(Optional) prefixes denied for the peer

dup_pfx_advmnt

(Optional) dup pfx advmnt for the peer

pfx_dup_wdr_count

(Optional) pfx dup wdr count for the peer

cluster_list_loops

(Optional) cluster list loops for the peer

as_path_loops

(Optional) as path loops for the peer

as_confed_loops

(Optional) as confed loops for the peer

invalid_originator

(Optional) invalid originator for the peer

adj_rib_in

(Optional) adj-rib-in for the peer

loc-rib

(Optional) loc-rib for the peer

Command Mode

- /exec

show bgp community

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv4 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv6 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 labeled-unicast | link-state | l2vpn vpls [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | l2vpn evpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 labeled-unicast | all } community { <regexp-str> | { { <comm-id> | <wellknown-id> } + [ exact-match ] } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <metric> <localpref> <weight> <aspath> <origin> } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> ] [ <inlabel> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid_flag> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

rd

(Optional) Display information for a route distinguisher

ext-comm-rd-aa4nn2

(Optional) VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

(Optional) VPN route distinguisher in aa:nn format

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

mdt

Display BGP information for multicast distribution tree

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

labeled-unicast

Display BGP information for labeled-unicast address family

mvpn

Display BGP information for MVPN address family

l2vpn

Display BGP information for L2VPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

community

Display routes matching the BGP communities

regexp-str

Regular expression to match the communities

comm-id

BGP community value

wellknown-id

BGP wellknown community

exact-match

(Optional) Exact match of the communities

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

inlabel

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_v6sid_flag

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp convergence

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] convergence [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ <starttime> <configdonetime> <juststarted> [ <initwaittime> ] [ <ldpconverged> ] [ <ulibconvergencesent> ] TABLE_vrf <vrf-name-out> <bestpathtimeout> <configuredtimeout> <updatedelay> [ <firstpeerup> ] <timerrunning> [ <timerexpires> ] TABLE_afi <afi> TABLE_safi <safi> <af-name> <total_configured_peers> <total_capable_peers> <firstbestpathsignalled> [ <firstbestpathsignalledtime> ] <firstbestpathdone> [ <firstbestpathdonetime> [ <lastbestpathsignalledtime> <lastbestpathdonetime> ] ] [ <riblibconvergencesent> ] [ <importtimerrunning> ] [ <importtimerexpires> ] [ { TABLE_rcvdpeers [ <peer> ] [ <ipv6peer> ] [ <signalledtimepeer> ] } ] [ { TABLE_notrcvdpeers [ <notpeer> ] [ <notipv6peer> ] [ <nokeepalive> ] [ <notsignalledtime> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

convergence

Display information about convergence

detail

(Optional) Display detailed information about convergence

__readonly__

(Optional)

starttime

(Optional)

configdonetime

(Optional)

juststarted

(Optional)

initwaittime

(Optional)

ldpconverged

(Optional)

ulibconvergencesent

(Optional)

TABLE_vrf

(Optional)

total_configured_peers

(Optional)

total_capable_peers

(Optional)

vrf-name-out

(Optional)

bestpathtimeout

(Optional)

updatedelay

(Optional)

firstpeerup

(Optional)

configuredtimeout

(Optional)

timerrunning

(Optional)

timerexpires

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

firstbestpathsignalled

(Optional)

firstbestpathsignalledtime

(Optional)

firstbestpathdone

(Optional)

firstbestpathdonetime

(Optional)

lastbestpathsignalledtime

(Optional)

lastbestpathdonetime

(Optional)

riblibconvergencesent

(Optional)

importtimerrunning

(Optional)

importtimerexpires

(Optional)

TABLE_rcvdpeers

(Optional)

peer

(Optional)

signalledtimepeer

(Optional)

TABLE_notrcvdpeers

(Optional)

notpeer

(Optional)

nokeepalive

(Optional)

notsignalledtime

(Optional)

Command Mode

- /exec

show bgp convergence private

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] convergence private [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

convergence

Display information about convergence

private

Display private information about convergence

Command Mode

- /exec

show bgp dampening dampened

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv4 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv6 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 labeled-unicast | link-state | l2vpn vpls [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | l2vpn evpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 labeled-unicast | all } dampening { dampened-paths [ regexp <regexp-str> ] | history-paths [ regexp <regexp-str> ] } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <metric> <localpref> <weight> <aspath> <origin> } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> ] [ <inlabel> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid_flag> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

dampened-paths

Display all dampened paths

history-paths

Display all history paths

dampening

Display dampening info

rd

(Optional) Display information for a route distinguisher

ext-comm-rd-aa4nn2

(Optional) VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

(Optional) VPN route distinguisher in aa:nn format

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

mdt

Display BGP information for multicast distribution tree

labeled-unicast

Display BGP information for labeled-unicast address family

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

mvpn

Display BGP information for MVPN address family

l2vpn

Display BGP information for L2VPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

regexp

(Optional) Display routes matching the AS path regular expression

regexp-str

(Optional) Regular expression to match the AS paths

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

inlabel

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_v6sid_flag

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp dampening flap-statistics

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv4 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv6 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 labeled-unicast | link-state | l2vpn vpls [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | l2vpn evpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 labeled-unicast | all } dampening flap-statistics [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ <dampeningenabled> <historypaths> <dampenedpaths> ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <status> ] [ <pathtype> ] [ <peer> | <ipv6peer> ] [ <flapcount> ] [ <duration> ] [ <reuse> ] [ <penalty> ] [ <suppresslimit> ] [ <reuselimit> ] [ <best> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

dampening

Display dampening info

flap-statistics

Display flap statistics for routes

rd

(Optional) Display information for a route distinguisher

ext-comm-rd-aa4nn2

(Optional) VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

(Optional) VPN route distinguisher in aa:nn format

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

mdt

Display BGP information for multicast distribution tree

labeled-unicast

Display BGP information for labeled-unicast address family

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

mvpn

Display BGP information for MVPN address family

l2vpn

Display BGP information for L2VPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

dampeningenabled

(Optional)

historypaths

(Optional)

dampenedpaths

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

status

(Optional)

best

(Optional)

pathtype

(Optional)

peer

(Optional)

flapcount

(Optional)

duration

(Optional)

reuse

(Optional)

penalty

(Optional)

suppresslimit

(Optional)

reuselimit

(Optional)

Command Mode

- /exec

show bgp dampening parameters

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv4 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv6 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 labeled-unicast | link-state | l2vpn vpls [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | l2vpn evpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 labeled-unicast | all } dampening parameters [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ TABLE_rd [ <rd_val> ] [ <rd_vrf> ] [ <rd_vniid> ] [ <rpmname> ] [ TABLE_rpm <rpmindex> <rpmdamphalflife> <rpmdampsuppress> <rpmdampreuse> <rpmdampsuppresstime> <rpmdampmaxpenalty> ] [ <dampconfigured> <damphalflife> <dampsuppress> <dampreuse> <dampsuppresstime> <dampmaxpenalty> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

dampening

Display dampening info

parameters

Display dampening parameters

rd

(Optional) Display information for a route distinguisher

ext-comm-rd-aa4nn2

(Optional) VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

(Optional) VPN route distinguisher in aa:nn format

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

mdt

Display BGP information for multicast distribution tree

labeled-unicast

Display BGP information for labeled-unicast address family

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

mvpn

Display BGP information for MVPN address family

l2vpn

Display BGP information for L2VPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional) VRF RD

rd_vniid

(Optional)

TABLE_rpm

(Optional)

rpmname

(Optional)

rpmindex

(Optional)

rpmdamphalflife

(Optional)

rpmdampsuppress

(Optional)

rpmdampreuse

(Optional)

rpmdampsuppresstime

(Optional)

rpmdampmaxpenalty

(Optional)

dampconfigured

(Optional)

damphalflife

(Optional)

dampsuppress

(Optional)

dampreuse

(Optional)

dampsuppresstime

(Optional)

dampmaxpenalty

(Optional)

Command Mode

- /exec

show bgp default-info

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | all } default-info [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

default-info

Display information about default routes

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

Command Mode

- /exec

show bgp event-history

show bgp [ internal ] event-history { <bgp-event-hist> | errors | msgs | detail } [ statistics ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

internal

(Optional) Commands for internal use

event-history

Show various event logs of BGP

bgp-event-hist

Show BGP event log

detail

Show detailed event logs

errors

Show error logs of BGP

msgs

Show various message logs of BGP

statistics

(Optional) Event history buffer statistics

Command Mode

- /exec

show bgp extcommunity

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv4 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv6 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 labeled-unicast | link-state | l2vpn vpls [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | l2vpn evpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 labeled-unicast | all } extcommunity { <regexp-str> | { { 4byteas-generic { transitive <ext-comm-gen-trans> | non-transitive <ext-comm-gen-nontrans> } } + [ exact-match ] } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <metric> <localpref> <weight> <aspath> <origin> } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> ] [ <inlabel> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid_flag> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

rd

(Optional) Display information for a route distinguisher

ext-comm-rd-aa4nn2

(Optional) VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

(Optional) VPN route distinguisher in aa:nn format

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

mdt

Display BGP information for multicast distribution tree

labeled-unicast

Display BGP information for labeled-unicast address family

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

mvpn

Display BGP information for MVPN address family

l2vpn

Display BGP information for L2VPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

extcommunity

Display routes matching the BGP extcommunities

4byteas-generic

Generic extended community

regexp-str

Regular expression to match the extcommunities

transitive

Transitive extcommunity

non-transitive

Non-Transitive extcommunity

ext-comm-gen-trans

Extcommunity number aa4:nn format

ext-comm-gen-nontrans

Extcommunity number aa4:nn format

exact-match

(Optional) Exact match of the extcommunities

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

inlabel

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_v6sid_flag

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp internal

show bgp internal { [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { all | debug | io | af | mqstat | bestpath | bfd | inject-map | neighbor { <neighbor-id> | <ipv6-neighbor-id> } | route-target | vfi [ <vfi-name> ] | peer-template <peer-template-name> | aggregates [ summary ] | peer-policy <policy-template-name> | peer-session <session-template-name> | nve-peer-vni [ history-buffer ] | route-reflector } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] }

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

internal

Commands for internal use

all

Show all info

debug

Show debug info

io

Show IO info

af

Show AF info

bestpath

Show bestpath info

bfd

Show BFD internal info

inject-map

Display information about inject maps

neighbor

Show neighbor specific counters

neighbor-id

Neighbor IP address

mqstat

Show message queue stats

aggregates

Display information about aggregates

peer-template

Display information about a peer-template

summary

(Optional) Summary only

peer-session

Display information about a peer-session

peer-policy

Display information about a peer-policy

route-target

Display information about route-target database

vfi

Display information about VFI database

nve-peer-vni

Display information about NVE peer-vni database

history-buffer

(Optional) Display history buffer for NVE peer-vni database

route-reflector

BGP route reflector information

vfi-name

(Optional) VFI name

peer-template-name

Peer-template name

session-template-name

Peer-session name

policy-template-name

Peer-policy name

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show bgp internal ead_es_cfg

show bgp internal ead_es_cfg

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

internal

Commands for internal use

ead_es_cfg

Display information about easd_es

Command Mode

- /exec

show bgp internal epe

show bgp internal epe

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

internal

Commands for internal use

epe

Display BGP Egress Peer Engineering (EPE) information

Command Mode

- /exec

show bgp internal evi

show bgp internal evi [ <evi-id> | <es-id> [ <seg-id> ] ] [ __readonly__ <l2ribbound> <l2ribvnireqs> <l2ribvniadds> <l2ribvnidels> <evpnisup> <evpnregistered> <evpndowninprogress> <evpnupdeferred> <evpnregistercount> <evpnregisterfail> <evpnderegistercount> <evpnderegisterfail> <evpnflowcontrol> <evpnflowcontrolenabled> <evpnflowcontroldisabled> { [ TABLE_rdinfo <rdinford> <rdinfol3vni> <rdinfoeviid> <rdinfoname> <rdinfonrprefixeslocal> <rdinfonrprefixesbrib> <rdinfonrexplocall3vpnpaths> <rdinfonrimpremotel3vpnpaths> ] } { [ TABLE_cfg <cfgeviid> <cfgeviindex> <cfgrd> <cfgexportrtcount> { [ TABLE_cfgexportrts <cfgexportrt> ] } <cfgimportrtcount> { [ TABLE_cfgimportrts <cfgimportrt> ] } <cfgtopoid> <cfgvtepip> <cfgvtepvpcip> <cfgenabled> <cfgdeletepending> <cfgnord> <cfgautord> <cfgnoimportrt> <cfgnoexportrt> ] } { [ TABLE_ctx <ctxeviid> <ctxl3vni> <ctxeviname> <ctxrd> <ctxnrprefixeslocal> <ctxnrprefixestotal> <ctxenabled> <ctxdeletepending> <ctxstale> <ctximportpending> <ctximportinprogress> <ctxencap> <ctxtopoid> <ctxethtagid> <ctxvnicount> <ctxpcifindx> <ctxvtepip> <ctxvtepvpcip> <ctxactiveexportrtcount> [ <ctxactiveexportrtlist> ] <ctxcfgexportrtcount> { [ TABLE_ctxcfgexportrts <ctxcfgexportrt> ] } <ctxexportrtchanges> <ctxexportrtchangespending> <ctxactiveimportrtcount> [ <ctxactiveimportrtlist> ] <ctxcfgimportrtcount> { [ TABLE_ctxcfgimportrts <ctxcfgimportrt> ] } <ctximportrtchanges> <ctximportrtchangespending> <ctximetreg> <ctximetunreg> <ctxmacreg> <ctxmacunreg> <ctxmacipreg> <ctxmacipunreg> <ctximetadd> <ctximetdel> <ctxmacadd> <ctxmacdel> <ctxmacipadd> <ctxmacipdel> <ctximetdnld> <ctximetwdraw> <ctxmacdnld> <ctxmacwdraw> <ctxmacipdnld> <ctxmacipwdraw> <ctxeadevidnld> <ctxeadeviwdraw> ] } ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

internal

Commands for internal use

evi

Display information about EVI database

evi-id

(Optional) EVI Id

es-id

(Optional) Ethernet Segment Identifier

seg-id

(Optional) Segment ID for EAD/ES

__readonly__

(Optional)

l2ribbound

(Optional)

l2ribvnireqs

(Optional)

l2ribvniadds

(Optional)

l2ribvnidels

(Optional)

evpnisup

(Optional)

evpnregistered

(Optional)

evpndowninprogress

(Optional)

evpnupdeferred

(Optional)

evpnregistercount

(Optional)

evpnregisterfail

(Optional)

evpnderegistercount

(Optional)

evpnderegisterfail

(Optional)

evpnflowcontrol

(Optional)

evpnflowcontrolenabled

(Optional)

evpnflowcontroldisabled

(Optional)

TABLE_rdinfo

(Optional)

rdinford

(Optional)

rdinfoeviid

(Optional)

rdinfol3vni

(Optional)

rdinfoname

(Optional)

rdinfonrprefixeslocal

(Optional)

rdinfonrprefixesbrib

(Optional)

rdinfonrexplocall3vpnpaths

(Optional)

rdinfonrimpremotel3vpnpaths

(Optional)

TABLE_cfg

(Optional)

cfgeviid

(Optional)

cfgeviindex

(Optional)

cfgrd

(Optional)

cfgexportrtcount

(Optional)

TABLE_cfgexportrts

(Optional)

cfgexportrt

(Optional)

cfgimportrtcount

(Optional)

TABLE_cfgimportrts

(Optional)

cfgimportrt

(Optional)

cfgtopoid

(Optional)

cfgvtepip

(Optional)

cfgvtepvpcip

(Optional)

cfgenabled

(Optional)

cfgdeletepending

(Optional)

cfgnord

(Optional)

cfgautord

(Optional)

cfgnoimportrt

(Optional)

cfgnoexportrt

(Optional)

TABLE_ctx

(Optional)

ctxeviid

(Optional)

ctxl3vni

(Optional)

ctxeviname

(Optional)

ctxrd

(Optional)

ctxnrprefixeslocal

(Optional)

ctxnrprefixestotal

(Optional)

ctxenabled

(Optional)

ctxdeletepending

(Optional)

ctxstale

(Optional)

ctximportpending

(Optional)

ctximportinprogress

(Optional)

ctxencap

(Optional)

ctxtopoid

(Optional)

ctxethtagid

(Optional)

ctxvnicount

(Optional)

ctxpcifindx

(Optional)

ctxvtepip

(Optional)

ctxvtepvpcip

(Optional)

ctxactiveexportrtcount

(Optional)

ctxactiveexportrtlist

(Optional)

ctxcfgexportrtcount

(Optional)

TABLE_ctxcfgexportrts

(Optional)

ctxcfgexportrt

(Optional)

ctxexportrtchanges

(Optional)

ctxexportrtchangespending

(Optional)

ctxactiveimportrtcount

(Optional)

ctxactiveimportrtlist

(Optional)

ctxcfgimportrtcount

(Optional)

TABLE_ctxcfgimportrts

(Optional)

ctxcfgimportrt

(Optional)

ctximportrtchanges

(Optional)

ctximportrtchangespending

(Optional)

ctximetreg

(Optional)

ctximetunreg

(Optional)

ctxmacreg

(Optional)

ctxmacunreg

(Optional)

ctxmacipreg

(Optional)

ctxmacipunreg

(Optional)

ctximetadd

(Optional)

ctximetdel

(Optional)

ctxmacadd

(Optional)

ctxmacdel

(Optional)

ctxmacipadd

(Optional)

ctxmacipdel

(Optional)

ctximetdnld

(Optional)

ctximetwdraw

(Optional)

ctxmacdnld

(Optional)

ctxmacwdraw

(Optional)

ctxmacipdnld

(Optional)

ctxmacipwdraw

(Optional)

ctxeadevidnld

(Optional)

ctxeadeviwdraw

(Optional)

Command Mode

- /exec

show bgp internal interface

show bgp internal interface [ <interface> ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

internal

Commands for internal use

interface

Display BGP interface related information

interface

(Optional) Interface name of single interface to display

Command Mode

- /exec

show bgp internal library-info

show bgp internal library-info

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

internal

Commands for internal use

library-info

Show various event logs of library

Command Mode

- /exec

show bgp internal lslib

show bgp internal lslib

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

internal

Commands for internal use

lslib

Display BGP Link-State Library (LSLIB) information

Command Mode

- /exec

show bgp internal mem-stats

show bgp internal mem-stats [ { shared | all [ no-libs ] | no-libs } ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

internal

Commands for internal use

mem-stats

Show memory allocation statistics

shared

(Optional) Display shared memory statistics

all

(Optional) Display private and shared memory statistics

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

Command Mode

- /exec

show bgp internal pss

show bgp internal pss

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

internal

Commands for internal use

pss

Display BGP Persistent System Storage (PSS) information

Command Mode

- /exec

show bgp internal rpc

show bgp internal rpc

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

internal

Commands for internal use

rpc

Display BGP Resilient Per-CE (RPC) information

Command Mode

- /exec

show bgp internal statistics

show bgp internal { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt | vpnv4 unicast | vpnv6 unicast | ipv6 labeled-unicast | link-state | l2vpn vpls | ipv4 mvpn | ipv6 mvpn | l2vpn evpn | ipv4 labeled-unicast | all } statistics [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

internal

Commands for internal use

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

labeled-unicast

Display BGP information for labeled-unicast address family

mdt

Display BGP information for multicast distribution tree

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

mvpn

Display BGP information for MVPN address family

vpls

Display BGP information for L2VPN VPLS address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

statistics

BGP Internal statistics

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

detail

(Optional) Detailed output

Command Mode

- /exec

show bgp l3vpn

show bgp l3vpn [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> [ <vrf-id> ] [ <vrf-rd> ] [ <vrf-state> ] [ <vrf-state-rsn> ] [ <vrf-pending-rd> ] [ { TABLE_af <af-id> [ <af-name> ] [ <af-table-id> ] [ <af-state> ] [ <af-state-rsn> ] [ <af-num-peers> ] [ <af-num-active-peers> ] [ <af-peer-routes> ] [ <af-peer-paths> ] [ <af-peer-networks> ] [ <af-peer-aggregates> ] [ <af-export-rmap> ] [ <af-import-rmap> ] [ <af-retain-rt> ] [ TABLE_export_rt <export-rt> ] [ TABLE_import_rt <import-rt> ] [ TABLE_evpn_export_rt <evpn-export-rt> ] [ TABLE_evpn_import_rt <evpn-import-rt> ] [ <af-label-mode> ] [ <af-aggregate-label> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

l3vpn

BGP l3vpn information

vrf

(Optional) Virtual Router Context

detail

(Optional) Detailed information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional) Read Only

TABLE_vrf

(Optional)

vrf-name-out

(Optional) VRF name

vrf-id

(Optional) VRF ID

vrf-state

(Optional) VRF State

vrf-state-rsn

(Optional) VRF State Reason

vrf-rd

(Optional) VRF RD

vrf-pending-rd

(Optional) VRF pending RD

TABLE_af

(Optional)

af-id

(Optional) AF ID

af-table-id

(Optional) AF table

af-name

(Optional) AF table name

af-state

(Optional) AF table state

af-state-rsn

(Optional) AF table state reason

af-num-peers

(Optional) No. of peers

af-num-active-peers

(Optional) No. of active peers

af-peer-routes

(Optional) No. of peer routes

af-peer-paths

(Optional) No. of peer paths

af-peer-networks

(Optional) No. of peer networks

af-peer-aggregates

(Optional) No. of aggregates

af-export-rmap

(Optional) Export route-map

af-import-rmap

(Optional) Import route-map

af-retain-rt

(Optional) Retain RT

TABLE_export_rt

(Optional)

export-rt

(Optional) Export route target

TABLE_import_rt

(Optional)

import-rt

(Optional) Import route target

TABLE_evpn_export_rt

(Optional)

evpn-export-rt

(Optional) Export EVPN route target

TABLE_evpn_import_rt

(Optional)

evpn-import-rt

(Optional) Import EVPN route target

af-label-mode

(Optional) Label allocation mode

af-aggregate-label

(Optional) Aggregate Label

Command Mode

- /exec

show bgp neighbors

show bgp { { [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | all } } | vpnv4 unicast | vpnv6 unicast | ipv6 labeled-unicast | link-state | l2vpn vpls | l2vpn evpn | ipv4 mvpn | ipv6 mvpn | ipv4 labeled-unicast } neighbors [ { <neighbor-id> | <ipv6-neighbor-id> | <neighbor-prefix-id> | <ipv6-neighbor-prefix-id> } ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_neighbor { <neighbor> | <ipv6neighbor> | <templatepeer> | <ipv4prefixneighbor> | <ipv6prefixneighbor> } [ <remoteas> ] [ <localas> ] <link> [ <index> ] [ TABLE_peer <peer> ] [ <maxprefixpeers> ] [ <configpeer> ] [ <inherit-template> ] [ <inherit-session-template> ] [ { <prefix-parent> | <ipv6prefix-parent> } ] [ <description> ] [ <version> <remote-id> <state> <up> <elapsedtime> [ <restarttime> ] ] [ <sourceif> ] [ <connectedif> ] [ <connectedcheck> ] [ <lowmemexempt> ] [ <bfd> ] [ <ttlsecurity> ] [ <ttllimit> ] [ <password> ] [ <passiveonly> ] [ <activepeers> <closingpeers> <maxconcurrentpeers> ] [ <allocatedpeers> ] [ <totalpeersaccepted> ] [ <localas-inactive> ] <remove-privateas> { { <lastread> <holdtime> <keepalivetime> <lastwrite> [ <keepalive> ] <msgrecvd> <notificationsrcvd> <recvbufbytes> <msgsent> <notificationssent> <sentbytesoutstanding> <connsestablished> <connsdropped> [ <connattempts> ] { { <peerresettime> <peerresetreason> <resettime> <resetreason> } | { <resettime> <resetreason> <peerresettime> <peerresetreason> } } [ <capsnegotiated> <capmpadvertised> [ <caprefreshadvertised> <capgrdynamicadvertised> ] [ <capmprecvd> <caprefreshrecvd> <capgrdynamicrecvd> ] [ <capolddynamicadvertised> <capolddynamicrecvd> <caprradvertised> <caprrrecvd> <capoldrradvertised> <capoldrrrecvd> <capas4advertised> <capas4recvd> ] [ { TABLE_af <af-afi> TABLE_saf <af-safi> <af-advertised> <af-recvd> <af-name> } ] [ <capgradvertised> <capgrrecvd> ] [ { TABLE_graf <gr-afi> TABLE_grsaf <gr-safi> <gr-af-name> <gr-adv> <gr-recv> <gr-fwd> } ] [ <grrestarttime> <grstaletime> ] [ <grrecvdrestarttime> ] [ [ { TABLE_addpathscapaf <addpathscap-afi> TABLE_addpathscapsaf <addpathscap-safi> <addpathscap-af-name> <addpathssendcap-adv> <addpathsrecvcap-adv> <addpathssendcap-recv> <addpathsrecvcap-recv> } ] [ <capaddpathsadvertised> <capaddpathsrecvd> ] ] [ <capextendednhadvertised> <capextendednhrecvd> ] [ { TABLE_capextendednhaf <capextendednh-afi> TABLE_capextendednhsaf <capextendednh-safi> <capextendednh-af-name> } ] ] } | { [ <configholdtime> <configkeepalivetime> ] } } [ <epe> ] [ <epe-adj-sids> ] [ <epe-peer-rpc-set> ] [ <epe-peer-sid> ] [ <epe-peer-set-name> ] [ <epe-peer-set-rpc-set> ] [ <epe-peer-set-sid> ] [ { TABLE_epe-adj { { <epe-adj-ip-local> <epe-adj-ip-remote> } | { <epe-adj-ipv6-local> <epe-adj-ipv6-remote> } } [ <epe-adj-ifindex> <epe-adj-rpc-set> <epe-adj-sid> ] } ] [ <grstate> <grexpiry> ] [ <firstkeepalive> ] [ <openssent> <opensrecvd> <updatessent> <updatesrecvd> <keepalivesent> <keepaliverecvd> <rtrefreshsent> <rtrefreshrecvd> <capabilitiessent> <capabilitiesrecvd> <bytessent> <bytesrecvd> ] [ TABLE_peraf <per-afi> TABLE_persaf <per-safi> <per-af-name> [ <tableversion> ] [ <neighbortableversion> ] [ <pfxrecvd> ] [ <pfxbytes> ] [ <pfxsent> ] [ <conditionmap> <advertisemap> <advertisemapstatus> ] <insoftreconfigallowed> [ <insoftreconfigallowedalways> ] [ <sendcommunity> ] [ <sendextcommunity> ] [ { <localnexthop> | <ipv6localnexthop> } ] [ <thirdpartynexthop> ] [ <maxpfx> ] [ <maxpfx_threshold> ] [ <soo> ] [ <weight> ] [ <allowasin> ] <asoverride> <peerascheckdisabled> [ <vplssignalingprotocol> ] [ { TABLE_inpolicy <inpolicynr> <inpolicytype> <inpolicyname> [ <inpolicyhandle> ] } ] [ { TABLE_outpolicy <outpolicynr> <outpolicytype> <outpolicyname> [ <outpolicyhandle> ] } ] [ <rrconfigured> ] [ <defaultoriginate> ] [ <defaultoriginatermap> ] [ <defaultsent> ] [ <grpathssaved> ] [ <grEoRrecvd> ] [ <grEoRtime> ] [ <unsuppress-map> ] [ { TABLE_policy_template <preference> <inherit-policy-template> } ] ] [ [ <threadid> ] [ <passivethreadid> <passivefd> ] [ { <localaddr> | <ipv6localaddr> } <localport> { <remoteaddr> | <ipv6remoteaddr> } <remoteport> <fd> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

neighbors

Display all configured BGP neighbors

neighbor-id

(Optional) Display one particular BGP neighbor

neighbor-prefix-id

(Optional) Display details for a prefix peering

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

labeled-unicast

Display BGP information for labeled-unicast address family

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

mvpn

Display BGP information for MVPN address family

l2vpn

Display BGP information for L2VPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

__readonly__

(Optional)

TABLE_neighbor

(Optional)

neighbor

(Optional)

templatepeer

(Optional)

ipv4prefixneighbor

(Optional)

remoteas

(Optional)

localas

(Optional)

link

(Optional)

index

(Optional)

TABLE_peer

(Optional)

peer

(Optional)

maxprefixpeers

(Optional)

configpeer

(Optional)

inherit-template

(Optional)

inherit-session-template

(Optional)

prefix-parent

(Optional)

description

(Optional)

version

(Optional)

remote-id

(Optional)

state

(Optional)

up

(Optional)

elapsedtime

(Optional)

restarttime

(Optional)

sourceif

(Optional)

connectedif

(Optional)

connectedcheck

(Optional)

lowmemexempt

(Optional)

bfd

(Optional)

ttlsecurity

(Optional)

ttllimit

(Optional)

localas-inactive

(Optional)

passiveonly

(Optional)

activepeers

(Optional)

closingpeers

(Optional)

maxconcurrentpeers

(Optional)

allocatedpeers

(Optional)

totalpeersaccepted

(Optional)

password

(Optional)

remove-privateas

(Optional)

lastread

(Optional)

holdtime

(Optional)

keepalivetime

(Optional)

lastwrite

(Optional)

keepalive

(Optional)

msgrecvd

(Optional)

notificationsrcvd

(Optional)

recvbufbytes

(Optional)

msgsent

(Optional)

notificationssent

(Optional)

sentbytesoutstanding

(Optional)

connsestablished

(Optional)

connsdropped

(Optional)

connattempts

(Optional)

peerresettime

(Optional)

peerresetreason

(Optional)

resettime

(Optional)

resetreason

(Optional)

configholdtime

(Optional)

configkeepalivetime

(Optional)

grstate

(Optional)

grexpiry

(Optional)

firstkeepalive

(Optional)

epe

(Optional)

epe-adj-sids

(Optional)

epe-peer-rpc-set

(Optional)

epe-peer-sid

(Optional)

epe-peer-set-name

(Optional)

epe-peer-set-rpc-set

(Optional)

epe-peer-set-sid

(Optional)

TABLE_epe-adj

(Optional)

epe-adj-ip-local

(Optional)

epe-adj-ip-remote

(Optional)

epe-adj-ifindex

(Optional)

epe-adj-rpc-set

(Optional)

epe-adj-sid

(Optional)

openssent

(Optional)

opensrecvd

(Optional)

updatessent

(Optional)

updatesrecvd

(Optional)

keepalivesent

(Optional)

keepaliverecvd

(Optional)

rtrefreshsent

(Optional)

rtrefreshrecvd

(Optional)

capabilitiessent

(Optional)

capabilitiesrecvd

(Optional)

bytessent

(Optional)

bytesrecvd

(Optional)

threadid

(Optional)

fd

(Optional)

passivethreadid

(Optional)

passivefd

(Optional)

localaddr

(Optional)

localport

(Optional)

remoteaddr

(Optional)

remoteport

(Optional)

capsnegotiated

(Optional)

capmpadvertised

(Optional)

capgrdynamicadvertised

(Optional)

capaddpathsadvertised

(Optional)

caprefreshadvertised

(Optional)

capmprecvd

(Optional)

capgrdynamicrecvd

(Optional)

capaddpathsrecvd

(Optional)

caprefreshrecvd

(Optional)

capolddynamicadvertised

(Optional)

capolddynamicrecvd

(Optional)

caprradvertised

(Optional)

caprrrecvd

(Optional)

capoldrradvertised

(Optional)

capoldrrrecvd

(Optional)

capas4advertised

(Optional)

capas4recvd

(Optional)

TABLE_af

(Optional)

af-afi

(Optional)

TABLE_saf

(Optional)

af-safi

(Optional)

af-advertised

(Optional)

af-recvd

(Optional)

af-name

(Optional)

capgradvertised

(Optional)

capgrrecvd

(Optional)

TABLE_graf

(Optional)

gr-afi

(Optional)

TABLE_grsaf

(Optional)

gr-safi

(Optional)

gr-af-name

(Optional)

gr-adv

(Optional)

gr-recv

(Optional)

gr-fwd

(Optional)

grrestarttime

(Optional)

grstaletime

(Optional)

grrecvdrestarttime

(Optional)

TABLE_addpathscapaf

(Optional)

addpathscap-afi

(Optional)

TABLE_addpathscapsaf

(Optional)

addpathscap-safi

(Optional)

addpathscap-af-name

(Optional)

addpathssendcap-adv

(Optional)

addpathsrecvcap-adv

(Optional)

addpathssendcap-recv

(Optional)

addpathsrecvcap-recv

(Optional)

capextendednhadvertised

(Optional)

capextendednhrecvd

(Optional)

TABLE_capextendednhaf

(Optional)

capextendednh-afi

(Optional)

TABLE_capextendednhsaf

(Optional)

capextendednh-safi

(Optional)

capextendednh-af-name

(Optional)

TABLE_peraf

(Optional)

per-afi

(Optional)

TABLE_persaf

(Optional)

per-safi

(Optional)

per-af-name

(Optional)

tableversion

(Optional)

neighbortableversion

(Optional)

pfxrecvd

(Optional)

pfxbytes

(Optional)

pfxsent

(Optional)

conditionmap

(Optional)

advertisemap

(Optional)

advertisemapstatus

(Optional)

insoftreconfigallowed

(Optional)

insoftreconfigallowedalways

(Optional)

sendcommunity

(Optional)

sendextcommunity

(Optional)

maxpfx

(Optional)

maxpfx_threshold

(Optional)

localnexthop

(Optional)

TABLE_inpolicy

(Optional)

inpolicynr

(Optional)

inpolicytype

(Optional)

inpolicyname

(Optional)

inpolicyhandle

(Optional)

TABLE_outpolicy

(Optional)

outpolicynr

(Optional)

outpolicytype

(Optional)

outpolicyname

(Optional)

outpolicyhandle

(Optional)

rrconfigured

(Optional)

defaultoriginate

(Optional)

defaultoriginatermap

(Optional)

defaultsent

(Optional)

grpathssaved

(Optional)

grEoRrecvd

(Optional)

grEoRtime

(Optional)

unsuppress-map

(Optional)

thirdpartynexthop

(Optional)

soo

(Optional)

weight

(Optional)

allowasin

(Optional)

asoverride

(Optional)

peerascheckdisabled

(Optional)

vplssignalingprotocol

(Optional)

TABLE_policy_template

(Optional)

preference

(Optional)

inherit-policy-template

(Optional)

Command Mode

- /exec

show bgp neighbors

show bgp { { [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | all } } | vpnv4 unicast | vpnv6 unicast | ipv6 labeled-unicast | l2vpn evpn | ipv4 labeled-unicast } neighbors { <neighbor-id> | <ipv6-neighbor-id> } { routes [ advertised | received | dampened ] | advertised-routes | received-routes } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <metric> <localpref> <weight> <aspath> <origin> } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> ] [ <inlabel> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid_flag> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

neighbors

Display all configured BGP neighbors

neighbor-id

Display one particular BGP neighbor

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

labeled-unicast

Display BGP information for labeled-unicast address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

l2vpn

Display BGP information for L2VPN address family

evpn

Display BGP information for L2VPN EVPN address family

routes

Display all routes advertised/received to/from peer

advertised

(Optional) Display all routes advertised to this peer

received

(Optional) Display all routes received from this peer

advertised-routes

Display all the routes advertised to this peer

received-routes

Display all the routes received from this peer

dampened

(Optional) Display all dampened routes received from this peer

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

inlabel

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_v6sid_flag

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp neighbors commands

show bgp { { [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | all } } | vpnv4 unicast | vpnv6 unicast | l2vpn evpn } neighbors { <neighbor-id> | <ipv6-neighbor-id> } commands [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ [ { TABLE_sesscmd <sessioncmd> <sessioncmdstatus> [ <sessioncmdtemplate> ] } ] [ TABLE_af <af-afi> TABLE_saf <af-safi> <af-name> [ { TABLE_polcmd <policycmd> <policycmdstatus> [ <policycmdtemplate> ] } ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

neighbor-id

Display one particular BGP neighbor

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

l2vpn

Display BGP information for L2VPN address family

evpn

Display BGP information for L2VPN EVPN address family

neighbors

Display all configured BGP neighbors

commands

Display details on commands

__readonly__

(Optional)

TABLE_sesscmd

(Optional)

sessioncmd

(Optional)

sessioncmdstatus

(Optional)

sessioncmdtemplate

(Optional)

TABLE_af

(Optional)

af-afi

(Optional)

TABLE_saf

(Optional)

af-safi

(Optional)

af-name

(Optional)

TABLE_polcmd

(Optional)

policycmd

(Optional)

policycmdstatus

(Optional)

policycmdtemplate

(Optional)

Command Mode

- /exec

show bgp neighbors flap-statistics

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | all } neighbors { <neighbor-id> | <ipv6-neighbor-id> } flap-statistics [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ <dampeningenabled> <historypaths> <dampenedpaths> ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <status> ] [ <pathtype> ] [ <peer> | <ipv6peer> ] [ <flapcount> ] [ <duration> ] [ <reuse> ] [ <penalty> ] [ <suppresslimit> ] [ <reuselimit> ] [ <best> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

neighbors

Display all configured BGP neighbors

neighbor-id

Display one particular BGP neighbor

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

flap-statistics

Display flap statistics for routes received from this peer

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

dampeningenabled

(Optional)

historypaths

(Optional)

dampenedpaths

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

status

(Optional)

best

(Optional)

pathtype

(Optional)

peer

(Optional)

flapcount

(Optional)

duration

(Optional)

reuse

(Optional)

penalty

(Optional)

suppresslimit

(Optional)

reuselimit

(Optional)

Command Mode

- /exec

show bgp neighbors paths

show bgp { { [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | all } } | vpnv4 unicast | vpnv6 unicast | ipv6 labeled-unicast | l2vpn evpn | ipv4 labeled-unicast } neighbors { <neighbor-id> | <ipv6-neighbor-id> } paths [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ TABLE_id <id> <hashvalue> <refcount> <metric> <aspath> ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

neighbors

Display all configured BGP neighbors

neighbor-id

Display one particular BGP neighbor

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

labeled-unicast

Display BGP information for labeled-unicast address family

all

Display BGP information for all address families

l2vpn

Display BGP information for L2VPN address family

evpn

Display BGP information for L2VPN EVPN address family

paths

Display AS paths learned from this peer

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

TABLE_id

(Optional)

id

(Optional)

hashvalue

(Optional)

refcount

(Optional)

metric

(Optional)

aspath

(Optional)

Command Mode

- /exec

show bgp paths

show [ ip ] bgp paths [ __readonly__ TABLE_id <id> <hashvalue> <refcount> <metric> <aspath> <origin> ]

Syntax Description

Syntax Description

show

Show running system information

ip

(Optional) Display IP information

bgp

Display BGP status and configuration

paths

Display Path information

__readonly__

(Optional)

TABLE_id

(Optional)

id

(Optional)

hashvalue

(Optional)

refcount

(Optional)

metric

(Optional)

aspath

(Optional)

origin

(Optional)

Command Mode

- /exec

show bgp peer-template

show [ ip ] bgp peer-template [ <peer-template-name> ] [ __readonly__ { TABLE_neighbor <templatepeer> [ <remoteas> ] [ <inherit-template> ] [ <inherit-session-template> ] [ { <prefix-parent> | <ipv6prefix-parent> } ] [ <description> ] [ <sourceif> ] [ <connectedcheck> ] [ <lowmemexempt> ] [ <bfd> ] [ <ttlsecurity> ] [ <ttllimit> ] [ <password> ] [ <passiveonly> ] <localas-inactive> [ <remove-privateas> ] [ <configholdtime> <configkeepalivetime> ] [ TABLE_peraf <per-afi> TABLE_persaf <per-safi> <per-af-name> [ <tableversion> ] [ <neighbortableversion> ] [ <pfxrecvd> ] [ <pfxbytes> ] [ <pfxsent> ] [ <conditionmap> <advertisemap> <advertisemapstatus> ] <insoftreconfigallowed> [ <insoftreconfigallowedalways> ] [ <sendcommunity> ] [ <sendextcommunity> ] [ { <localnexthop> | <ipv6localnexthop> } ] [ <thirdpartynexthop> ] [ <maxpfx> ] [ <maxpfx_threshold> ] [ <soo> ] [ <weight> ] [ <allowasin> ] <asoverride> <peerascheckdisabled> [ <vplssignalingprotocol> ] [ { TABLE_inpolicy <inpolicynr> <inpolicytype> <inpolicyname> [ <inpolicyhandle> ] } ] [ { TABLE_outpolicy <outpolicynr> <outpolicytype> <outpolicyname> [ <outpolicyhandle> ] } ] [ <rrconfigured> ] [ <defaultoriginate> ] [ <defaultoriginatermap> ] [ <defaultsent> ] [ <grpathssaved> ] [ <grEoRrecvd> ] [ <grEoRtime> ] [ <unsuppress-map> ] [ { TABLE_policy_template <preference> <inherit-policy-template> } ] ] [ TABLE_vrf <vrf-name> [ TABLE_inheritingpeer <inheritingpeer> ] ] } ]

Syntax Description

Syntax Description

show

Show running system information

ip

(Optional) Display IP information

bgp

Display BGP status and configuration

peer-template

Display information about a peer-template

peer-template-name

(Optional) Peer-template name

__readonly__

(Optional)

TABLE_neighbor

(Optional)

templatepeer

(Optional)

remoteas

(Optional)

inherit-template

(Optional)

inherit-session-template

(Optional)

prefix-parent

(Optional)

description

(Optional)

sourceif

(Optional)

connectedcheck

(Optional)

lowmemexempt

(Optional)

bfd

(Optional)

ttlsecurity

(Optional)

ttllimit

(Optional)

passiveonly

(Optional)

password

(Optional)

localas-inactive

(Optional)

remove-privateas

(Optional)

configholdtime

(Optional)

configkeepalivetime

(Optional)

TABLE_vrf

(Optional)

vrf-name

(Optional)

TABLE_inheritingpeer

(Optional)

inheritingpeer

(Optional)

TABLE_peraf

(Optional)

per-afi

(Optional)

TABLE_persaf

(Optional)

per-safi

(Optional)

per-af-name

(Optional)

tableversion

(Optional)

neighbortableversion

(Optional)

pfxrecvd

(Optional)

pfxbytes

(Optional)

pfxsent

(Optional)

conditionmap

(Optional)

advertisemap

(Optional)

advertisemapstatus

(Optional)

insoftreconfigallowed

(Optional)

insoftreconfigallowedalways

(Optional)

sendcommunity

(Optional)

sendextcommunity

(Optional)

maxpfx

(Optional)

maxpfx_threshold

(Optional)

localnexthop

(Optional)

TABLE_inpolicy

(Optional)

inpolicynr

(Optional)

inpolicytype

(Optional)

inpolicyname

(Optional)

inpolicyhandle

(Optional)

TABLE_outpolicy

(Optional)

outpolicynr

(Optional)

outpolicytype

(Optional)

outpolicyname

(Optional)

outpolicyhandle

(Optional)

rrconfigured

(Optional)

defaultoriginate

(Optional)

defaultoriginatermap

(Optional)

defaultsent

(Optional)

grpathssaved

(Optional)

grEoRrecvd

(Optional)

grEoRtime

(Optional)

unsuppress-map

(Optional)

thirdpartynexthop

(Optional)

soo

(Optional)

weight

(Optional)

allowasin

(Optional)

asoverride

(Optional)

peerascheckdisabled

(Optional)

vplssignalingprotocol

(Optional)

TABLE_policy_template

(Optional)

preference

(Optional)

inherit-policy-template

(Optional)

Command Mode

- /exec

show bgp peer

show [ ip ] bgp { peer-session [ <session-template-name> ] | peer-policy [ <policy-template-name> ] } [ __readonly__ TABLE_template <template> <present> [ { TABLE_command <command> [ <polarity> ] [ <updatesource> ] [ <description> ] [ <multihop> ] [ <holdtime> ] [ <keepalive> ] [ <routemapin> ] [ <routemapout> ] [ <filterlistin> ] [ <filterlistout> ] [ <prefixlistin> ] [ <prefixlistout> ] [ <maxprefixlimit> ] [ <defaultorigin> ] } ] [ { TABLE_vrf <vrf-name> { TABLE_peer <inheritingpeer> } } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

(Optional) Display IP information

bgp

Display BGP status and configuration

peer-session

Display information about a peer-session

peer-policy

Display information about a peer-policy

session-template-name

(Optional) Peer-session name

policy-template-name

(Optional) Peer-policy name

__readonly__

(Optional)

TABLE_template

(Optional)

template

(Optional)

present

(Optional)

TABLE_command

(Optional)

command

(Optional)

polarity

(Optional)

updatesource

(Optional)

description

(Optional)

multihop

(Optional)

holdtime

(Optional)

keepalive

(Optional)

routemapin

(Optional)

routemapout

(Optional)

filterlistin

(Optional)

filterlistout

(Optional)

prefixlistin

(Optional)

prefixlistout

(Optional)

maxprefixlimit

(Optional)

defaultorigin

(Optional)

TABLE_vrf

(Optional)

vrf-name

(Optional)

TABLE_peer

(Optional)

inheritingpeer

(Optional)

Command Mode

- /exec

show bgp prefix-list

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } } prefix-list { <prfxlist-name> | <test_pol_name> } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <metric> <localpref> <weight> <aspath> <origin> } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> ] [ <inlabel> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid_flag> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

prefix-list

Display routes matching the prefix-list

prfxlist-name

Name of prefix-list

test_pol_name

An existing test-list policy

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

inlabel

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_v6sid_flag

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp private

show bgp private [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { all_private | session | ipc | rnh | lists | rpm-info [ route-map <rpm-name> { <ip-prefix> | <ipv6-prefix> } ] | attr [ { <ip-prefix> } ] | rpm-attribute-cache | rpm-comm-attr-cache | virtual [ summary ] } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

private

Show BGP information intended for developer eyes only

all_private

Show all info

session

Show session info

lists

Show BGP internal lists

route-map

(Optional) Show information for route-map

rpm-info

Show BGP policy outbound info

ip-prefix

(Optional) Show attribute for a prefix

rpm-name

(Optional) Route-map name

attr

Show attribute information

ipc

Show ipc information

rnh

Show recursive next hops

rpm-attribute-cache

Show rpm attribute cache statistics

rpm-comm-attr-cache

Show rpm community attribute cache statistics

summary

(Optional) Summary only

virtual

Virtualization related

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show bgp private attr

show bgp private attr [ remote-nh ] [ [ [ ipv4 { unicast | multicast } <ip-prefix> ] | [ ipv6 { unicast | multicast } <ipv6-prefix> ] ] [ detail ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

private

Show BGP information intended for developer eyes only

attr

Show BGP attributes

remote-nh

(Optional) Show Remote NH Attr

ipv4

(Optional) Display BGP information for IPv4 address family

ipv6

(Optional) Display BGP information for IPv6 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

detail

(Optional) Show detailed info

ip-prefix

(Optional) Show attribute for a prefix

Command Mode

- /exec

show bgp private damp

show bgp private [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | all } damp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

private

Show BGP information intended for developer eyes only

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

damp

Show dampening info

Command Mode

- /exec

show bgp private debug history

show bgp private debug history { all | ead-es | es | mac }

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

private

Show BGP information intended for developer eyes only

debug

Debug

history

history

all

all

ead-es

ead-es

es

es

mac

mac

Command Mode

- /exec

show bgp process

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] process [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ [ <processid> <protocolstartedreason> <protocoltag> <protocolstate> [ <isolatemode> ] <mmode> <memorystate> [ <mallocmemorystate> ] [ <platformmemorystate> ] [ <lowmemorytimer> ] [ <issu> ] <forwardingstatesaved> <asformat> [ <fabricsoo> ] [ <srgbmin> <srgbmax> ] [ <epeconfiguredpeers> <epeactivepeers> ] <attributeentries> <hwmattributeentries> <bytesused> <entriespendingdelete> <hwmentriespendingdelete> <pathsperattribute> <aspathentries> <aspathbytes> ] TABLE_vrf <vrf-name-out> [ <vrf-id> ] [ <vrf-state> ] [ <vrf-state-rsn> ] [ <vrf-delete-pending> ] [ <vrf-vni-id> ] [ <vrf-vni-id-valid> ] [ <vrf-encap-type> ] [ <vrf-vtep-ip> ] [ <vrf-vtep-virtual-ip> ] [ <vrf-router-mac> ] [ <vrf-router-id> ] [ <vrf-cfgd-id> ] [ <vrf-local-as> ] [ <vrf-confed-id> ] [ <vrf-cluster-id> ] [ <vrf-reconnect-interval> ] [ <vrf-peers> ] [ <vrf-pending-peers> ] [ <vrf-est-peers> ] [ <vrf-cfgd-max-as-limit> ] [ <vrf-max-as-limit> ] [ <vrf-rd> ] [ <vrf-pending-rd> ] { TABLE_af <af-id> [ <af-name> ] [ <af-table-id> ] [ <af-state> ] [ <af-state-rsn> ] [ <af-num-peers> ] [ <af-num-active-peers> ] [ <af-peer-routes> ] [ <af-peer-paths> ] [ <af-peer-networks> ] [ <af-peer-aggregates> ] [ <af-export-rmap> ] [ <af-import-rmap> ] [ <af-retain-rt> ] [ { TABLE_redist <protocol> <route-map> } ] [ { TABLE_add_paths_selection <route-map> } ] [ TABLE_export_rt <export-rt> ] [ TABLE_import_rt <import-rt> ] [ TABLE_evpn_export_rt <evpn-export-rt> ] [ TABLE_evpn_import_rt <evpn-import-rt> ] [ <af-label-mode> ] [ <af-aggregate-label> ] [ <importdefault_prefixlimit> <importdefault_prefixcount> <importdefault_map> ] [ <exportdefault_prefixlimit> <exportdefault_prefixcount> <exportdefault_map> ] <af-rr> <default-information-enabled> [ <default-information-rd> <default-information-rt> ] <nexthop-trigger-delay-critical> <nexthop-trigger-delay-non-critical> [ <nexthop-route-map> ] } ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

process

BGP global information

detail

(Optional) Detailed information

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional) Read Only

processid

(Optional)

protocolstartedreason

(Optional)

protocoltag

(Optional)

protocolstate

(Optional)

isolatemode

(Optional)

mmode

(Optional)

memorystate

(Optional)

mallocmemorystate

(Optional)

platformmemorystate

(Optional)

lowmemorytimer

(Optional)

issu

(Optional)

forwardingstatesaved

(Optional)

asformat

(Optional)

attributeentries

(Optional)

fabricsoo

(Optional)

srgbmin

(Optional)

srgbmax

(Optional)

epeconfiguredpeers

(Optional)

epeactivepeers

(Optional)

hwmattributeentries

(Optional)

bytesused

(Optional)

entriespendingdelete

(Optional)

hwmentriespendingdelete

(Optional)

pathsperattribute

(Optional)

aspathentries

(Optional)

aspathbytes

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional) VRF name

vrf-id

(Optional) VRF ID

vrf-state

(Optional) VRF State

vrf-state-rsn

(Optional) VRF State Reason

vrf-delete-pending

(Optional) VRF delete pending

vrf-vni-id

(Optional) VRF VNI ID

vrf-vni-id-valid

(Optional) VRF VNI ID validity

vrf-encap-type

(Optional) VRF encapsulation type

vrf-vtep-ip

(Optional) VRF VTEP IP

vrf-vtep-virtual-ip

(Optional) VRF VTEP Virtual IP

vrf-router-mac

(Optional) VRF Router MAC

vrf-router-id

(Optional) Router ID

vrf-cfgd-id

(Optional) Configured Router-ID

vrf-local-as

(Optional) Local AS

vrf-confed-id

(Optional) Cluster-ID

vrf-cluster-id

(Optional) Cluster-ID

vrf-reconnect-interval

(Optional) VRF reconnect interval

vrf-peers

(Optional) No. of configured peers

vrf-pending-peers

(Optional) No. of pending peers

vrf-est-peers

(Optional) No. of established peers

vrf-cfgd-max-as-limit

(Optional) Configured maxas-limit

vrf-max-as-limit

(Optional) Active maxas-limit

vrf-rd

(Optional) VRF RD

vrf-pending-rd

(Optional) VRF pending RD

TABLE_af

(Optional)

af-id

(Optional) AF ID

af-table-id

(Optional) AF table

af-name

(Optional) AF table name

af-state

(Optional) AF table state

af-state-rsn

(Optional) AF table state reason

af-num-peers

(Optional) No. of peers

af-num-active-peers

(Optional) No. of active peers

af-peer-routes

(Optional) No. of peer routes

af-peer-paths

(Optional) No. of peer paths

af-peer-networks

(Optional) No. of peer networks

af-peer-aggregates

(Optional) No. of aggregates

af-export-rmap

(Optional) Export route-map

af-import-rmap

(Optional) Import route-map

af-retain-rt

(Optional) Retain RT

TABLE_redist

(Optional)

protocol

(Optional) Protocol

route-map

(Optional) Route Map

TABLE_add_paths_selection

(Optional)

route-map

(Optional) Route Map

TABLE_export_rt

(Optional)

export-rt

(Optional) Export route target

TABLE_import_rt

(Optional)

import-rt

(Optional) Import route target

TABLE_evpn_export_rt

(Optional)

evpn-export-rt

(Optional) Export EVPN route target

TABLE_evpn_import_rt

(Optional)

evpn-import-rt

(Optional) Import EVPN route target

af-label-mode

(Optional) Label allocation mode

af-aggregate-label

(Optional) Aggregate Label

importdefault_prefixlimit

(Optional) Maximum number of prefixes allowed

importdefault_prefixcount

(Optional) Current number of prefixes

importdefault_map

(Optional) Configured route-map

exportdefault_prefixlimit

(Optional) Maximum number of prefixes allowed

exportdefault_prefixcount

(Optional) Current number of prefixes

exportdefault_map

(Optional) Configured route-map

af-rr

(Optional) Is a Route-reflector

default-information-enabled

(Optional) Default-information originate is enabled

default-information-rd

(Optional) Default-information originate RD

default-information-rt

(Optional) Default-information originate RT

nexthop-trigger-delay-critical

(Optional)

nexthop-trigger-delay-non-critical

(Optional)

nexthop-route-map

(Optional)

Command Mode

- /exec

show bgp received-paths

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv4 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | vpnv6 unicast [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 labeled-unicast | link-state | l2vpn vpls [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv6 mvpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | l2vpn evpn [ rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } ] | ipv4 labeled-unicast | all } received-paths [ private ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <metric> <localpref> <weight> <aspath> <origin> } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> ] [ <inlabel> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid_flag> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

received-paths

Display paths stored for soft-reconfig

rd

(Optional) Display information for a route distinguisher

ext-comm-rd-aa4nn2

(Optional) VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

(Optional) VPN route distinguisher in aa:nn format

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

mdt

Display BGP information for multicast distribution tree

labeled-unicast

Display BGP information for labeled-unicast address family

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

mvpn

Display BGP information for MVPN address family

l2vpn

Display BGP information for L2VPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

private

(Optional) private

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

inlabel

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_v6sid_flag

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp regexp

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | all } regexp <regexp-str> [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <metric> <localpref> <weight> <aspath> <origin> } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> ] [ <inlabel> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid_flag> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

regexp

Display routes matching the AS path regular expression

regexp-str

Regular expression to match the AS paths

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

inlabel

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_v6sid_flag

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp self-originated

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | all } self-originated [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_safi <safi> <af-name> [ <table-version> <router-id> ] [ TABLE_rd [ <rd_val> [ <rd_vrf> ] [ <rd_vniid> ] ] [ TABLE_prefix { <ipprefix> | <ipv6prefix> | <nonipprefix> } [ <prefixversion> <totalpaths> <bestpathnr> [ <on-newlist> <on-xmitlist> <suppressed> <needsresync> <locked> ] [ <export-on-newlist> <export-on-xmitlist> ] [ <locallabel> ] [ <labelhldwstr> ] [ <mpath> ] ] { TABLE_path <pathnr> { { <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <status> <best> <type> <statuscode> <bestcode> <typecode> { <ipnexthop> | <ipv6nexthop> } { { <inlabel> <outlabel> <vpn> <hold_down> } | { <metric> <localpref> <weight> <aspath> <origin> } } } | { [ <policyincomplete> <pathvalid> <pathbest> <pathdeleted> <pathstaled> <pathhistory> <pathovermaxaslimit> <pathmultipath> <pathnolabeledrnh> ] [ <existpath> ] [ <aspath> <source> ] { <ipnexthop> | <ipv6nexthop> } <nexthopmetric> { <neighbor> | <ipv6neighbor> } <neighborid> <origin> [ <metric> ] <localpref> <weight> [ <aggregator> <aggregatoras> ] [ <inlabel> ] [ { TABLE_community <community> } ] [ { TABLE_extcommunity <extcommunity> } ] [ <originatorid> { TABLE_clusterlist <clusterlist> } ] [ <flappenalty> <dampenedtime> <flaps> <flaptime> <flapflags> <flapindex> <flaphalflife> <flapreuse> <flapsuppress> <flapmax> ] [ <con_type> <con_len> <con_rd> <con_ip> ] [ <psid_len> [ <psid_lindx_len> <psid_lindx_flag> <psid_lindx> ] [ <psid_v6sid_len> <psid_v6sid_flag> ] [ <psid_origsrgb_len> <psid_origsrgb_flag> <psid_origsrgb_base> <psid_origsrgb_end> ] ] [ <remotenh> <remotenh_encap> <remotenh_vnid> <remotenh_mac> ] [ <pmsi> ] [ <evpn-esi> ] [ <link-state-attr> <link-state-attr-len> ] [ <mdt_grp_addr> ] } } } [ TABLE_advertisedto <advertisedto> ] [ TABLE_scheduledto <scheduledto> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

self-originated

Self originated routes

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_safi

(Optional)

safi

(Optional)

af-name

(Optional)

table-version

(Optional)

router-id

(Optional)

TABLE_rd

(Optional)

rd_val

(Optional)

rd_vrf

(Optional)

rd_vniid

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

nonipprefix

(Optional)

totalpaths

(Optional)

bestpathnr

(Optional)

mpath

(Optional)

TABLE_advertisedto

(Optional)

advertisedto

(Optional)

TABLE_scheduledto

(Optional)

scheduledto

(Optional)

prefixversion

(Optional)

on-newlist

(Optional)

on-xmitlist

(Optional)

suppressed

(Optional)

needsresync

(Optional)

locked

(Optional)

export-on-newlist

(Optional)

export-on-xmitlist

(Optional)

locallabel

(Optional)

labelhldwstr

(Optional)

TABLE_path

(Optional)

pathnr

(Optional)

best

(Optional)

status

(Optional)

type

(Optional)

statuscode

(Optional)

bestcode

(Optional)

typecode

(Optional)

ipnexthop

(Optional)

neighbor

(Optional)

neighborid

(Optional)

metric

(Optional)

localpref

(Optional)

weight

(Optional)

existpath

(Optional)

aspath

(Optional)

origin

(Optional)

source

(Optional)

policyincomplete

(Optional)

pathvalid

(Optional)

pathbest

(Optional)

pathdeleted

(Optional)

pathstaled

(Optional)

pathhistory

(Optional)

pathmultipath

(Optional)

pathovermaxaslimit

(Optional)

pathnolabeledrnh

(Optional)

nexthopmetric

(Optional)

aggregator

(Optional)

aggregatoras

(Optional)

inlabel

(Optional)

vpn

(Optional)

hold_down

(Optional)

outlabel

(Optional)

flappenalty

(Optional)

dampenedtime

(Optional)

flaps

(Optional)

flaptime

(Optional)

flapflags

(Optional)

flapindex

(Optional)

flaphalflife

(Optional)

flapreuse

(Optional)

flapsuppress

(Optional)

flapmax

(Optional)

con_type

(Optional)

con_len

(Optional)

con_rd

(Optional)

con_ip

(Optional)

mdt_grp_addr

(Optional)

evpn-esi

(Optional)

link-state-attr

(Optional)

link-state-attr-len

(Optional)

TABLE_community

(Optional)

community

(Optional)

TABLE_extcommunity

(Optional)

extcommunity

(Optional)

originatorid

(Optional)

TABLE_clusterlist

(Optional)

clusterlist

(Optional)

remotenh

(Optional)

remotenh_encap

(Optional)

remotenh_vnid

(Optional)

remotenh_mac

(Optional)

pmsi

(Optional)

psid_len

(Optional)

psid_lindx_len

(Optional)

psid_lindx_flag

(Optional)

psid_lindx

(Optional)

psid_v6sid_len

(Optional)

psid_v6sid_flag

(Optional)

psid_origsrgb_len

(Optional)

psid_origsrgb_flag

(Optional)

psid_origsrgb_base

(Optional)

psid_origsrgb_end

(Optional)

Command Mode

- /exec

show bgp sessions

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] sessions [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ <totalpeers> <totalestablishedpeers> <localas> TABLE_vrf <vrf-name-out> <local-as> <vrfpeers> <vrfestablishedpeers> <router-id> TABLE_neighbor <neighbor-id> <remoteas> <connectionsdropped> <lastflap> <lastread> <lastwrite> <state> <localport> <remoteport> <notificationssent> <notificationsreceived> ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

sessions

Display session information for all peers

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

local-as

(Optional)

totalpeers

(Optional)

totalestablishedpeers

(Optional)

router-id

(Optional)

localas

(Optional)

vrfpeers

(Optional)

vrfestablishedpeers

(Optional)

TABLE_neighbor

(Optional)

neighbor-id

(Optional)

remoteas

(Optional)

connectionsdropped

(Optional)

lastflap

(Optional)

lastread

(Optional)

lastwrite

(Optional)

state

(Optional)

localport

(Optional)

remoteport

(Optional)

notificationssent

(Optional)

notificationsreceived

(Optional)

Command Mode

- /exec

show bgp statistics

show bgp statistics [ __readonly__ <msgsent> <msgrecvd> <bytesent> <byterecvd> <opensent> <openrecvd> <updatesent> <updaterecvd> <kasent> <karecvd> <notifsent> <notifrecvd> <rrefreshsent> <rrefreshrecvd> <capsent> <caprecvd> ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

statistics

BGP global statistics

__readonly__

(Optional)

msgsent

(Optional)

msgrecvd

(Optional)

bytesent

(Optional)

byterecvd

(Optional)

opensent

(Optional)

openrecvd

(Optional)

updatesent

(Optional)

updaterecvd

(Optional)

kasent

(Optional)

karecvd

(Optional)

notifsent

(Optional)

notifrecvd

(Optional)

rrefreshsent

(Optional)

rrefreshrecvd

(Optional)

capsent

(Optional)

caprecvd

(Optional)

Command Mode

- /exec

show bgp summary

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | all } summary [ __readonly__ TABLE_vrf <vrf-name-out> [ <vrf-id> ] [ <vrf-state> ] [ <vrf-state-rsn> ] [ <vrf-delete-pending> ] [ <vrf-vni-id> ] [ <vrf-vni-id-valid> ] [ <vrf-encap-type> ] [ <vrf-vtep-ip> ] [ <vrf-vtep-virtual-ip> ] [ <vrf-router-mac> ] [ <vrf-router-id> ] [ <vrf-cfgd-id> ] [ <vrf-local-as> ] [ <vrf-confed-id> ] [ <vrf-cluster-id> ] [ <vrf-reconnect-interval> ] [ <vrf-peers> ] [ <vrf-pending-peers> ] [ <vrf-est-peers> ] [ <vrf-cfgd-max-as-limit> ] [ <vrf-max-as-limit> ] [ <vrf-rd> ] [ <vrf-pending-rd> ] [ TABLE_af <af-id> [ <af-name> ] [ <af-table-id> ] [ <af-state> ] [ <af-state-rsn> ] [ <af-num-peers> ] [ <af-num-active-peers> ] [ <af-peer-routes> ] [ <af-peer-paths> ] [ <af-peer-networks> ] [ <af-peer-aggregates> ] [ <af-export-rmap> ] [ <af-import-rmap> ] [ <af-retain-rt> ] TABLE_saf <safi> [ <af-name> ] [ <tableversion> ] [ <configuredpeers> ] [ <capablepeers> ] [ <totalnetworks> ] [ <totalpaths> ] [ <memoryused> ] [ <numberattrs> ] [ <bytesattrs> ] [ <numberpaths> ] [ <bytespaths> ] [ <numbercommunities> ] [ <bytescommunities> ] [ <numberclusterlist> ] [ <bytesclusterlist> ] [ <dampening> ] [ <historypaths> ] [ <dampenedpaths> ] [ <softreconfigrecvdpaths> ] [ <softreconfigidenticalpaths> ] [ <softreconfigcombopaths> ] [ <softreconfigfilteredrecvd> ] [ <softreconfigbytes> ] [ TABLE_neighbor <neighborid> [ <neighborversion> ] [ <msgrecvd> ] [ <msgsent> ] [ <neighbortableversion> ] [ <inq> ] [ <outq> ] [ <neighboras> ] [ <time> ] [ <state> ] [ <prefixreceived> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

summary

Display summarized information of BGP state

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

all

Display BGP information for all address families

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional) VRF name

vrf-id

(Optional) VRF ID

vrf-state

(Optional) VRF State

vrf-state-rsn

(Optional) VRF State Reason

vrf-delete-pending

(Optional) VRF delete pending

vrf-vni-id

(Optional) VRF VNI ID

vrf-vni-id-valid

(Optional) VRF VNI ID validity

vrf-encap-type

(Optional) VRF encapsulation type

vrf-vtep-ip

(Optional) VRF VTEP IP

vrf-vtep-virtual-ip

(Optional) VRF VTEP Virtual IP

vrf-router-mac

(Optional) VRF Router MAC

vrf-router-id

(Optional) Router ID

vrf-cfgd-id

(Optional) Configured Router-ID

vrf-local-as

(Optional) Local AS

vrf-confed-id

(Optional) Cluster-ID

vrf-cluster-id

(Optional) Cluster-ID

vrf-reconnect-interval

(Optional) VRF reconnect interval

vrf-peers

(Optional) No. of configured peers

vrf-pending-peers

(Optional) No. of pending peers

vrf-est-peers

(Optional) No. of established peers

vrf-cfgd-max-as-limit

(Optional) Configured maxas-limit

vrf-max-as-limit

(Optional) Active maxas-limit

vrf-rd

(Optional) VRF RD

vrf-pending-rd

(Optional) VRF pending RD

TABLE_af

(Optional)

af-id

(Optional) AF ID

af-table-id

(Optional) AF table

af-name

(Optional) AF table name

af-state

(Optional) AF table state

af-state-rsn

(Optional) AF table state reason

af-num-peers

(Optional) No. of peers

af-num-active-peers

(Optional) No. of active peers

af-peer-routes

(Optional) No. of peer routes

af-peer-paths

(Optional) No. of peer paths

af-peer-networks

(Optional) No. of peer networks

af-peer-aggregates

(Optional) No. of aggregates

af-export-rmap

(Optional) Export route-map

af-import-rmap

(Optional) Import route-map

af-retain-rt

(Optional) Retain RT

TABLE_saf

(Optional)

safi

(Optional)

af-name

(Optional)

tableversion

(Optional)

configuredpeers

(Optional)

capablepeers

(Optional)

totalnetworks

(Optional)

totalpaths

(Optional)

memoryused

(Optional)

numberattrs

(Optional)

bytesattrs

(Optional)

numberpaths

(Optional)

bytespaths

(Optional)

numbercommunities

(Optional)

bytescommunities

(Optional)

numberclusterlist

(Optional)

bytesclusterlist

(Optional)

dampening

(Optional)

historypaths

(Optional)

dampenedpaths

(Optional)

softreconfigrecvdpaths

(Optional)

softreconfigidenticalpaths

(Optional)

softreconfigcombopaths

(Optional)

softreconfigfilteredrecvd

(Optional)

softreconfigbytes

(Optional)

TABLE_neighbor

(Optional)

neighborid

(Optional)

neighborversion

(Optional)

neighboras

(Optional)

msgrecvd

(Optional)

msgsent

(Optional)

neighbortableversion

(Optional)

inq

(Optional)

outq

(Optional)

time

(Optional)

state

(Optional)

prefixreceived

(Optional)

Command Mode

- /exec

show bgp summary

show bgp { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt | vpnv4 unicast | vpnv6 unicast | ipv6 labeled-unicast | link-state | l2vpn vpls | ipv4 mvpn | ipv6 mvpn | l2vpn evpn | ipv4 labeled-unicast | all } summary [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ __readonly__ TABLE_vrf <vrf-name-out> [ <vrf-id> ] [ <vrf-state> ] [ <vrf-state-rsn> ] [ <vrf-delete-pending> ] [ <vrf-vni-id> ] [ <vrf-vni-id-valid> ] [ <vrf-encap-type> ] [ <vrf-vtep-ip> ] [ <vrf-vtep-virtual-ip> ] [ <vrf-router-mac> ] [ <vrf-router-id> ] [ <vrf-cfgd-id> ] [ <vrf-local-as> ] [ <vrf-confed-id> ] [ <vrf-cluster-id> ] [ <vrf-reconnect-interval> ] [ <vrf-peers> ] [ <vrf-pending-peers> ] [ <vrf-est-peers> ] [ <vrf-cfgd-max-as-limit> ] [ <vrf-max-as-limit> ] [ <vrf-rd> ] [ <vrf-pending-rd> ] [ TABLE_af <af-id> [ <af-name> ] [ <af-table-id> ] [ <af-state> ] [ <af-state-rsn> ] [ <af-num-peers> ] [ <af-num-active-peers> ] [ <af-peer-routes> ] [ <af-peer-paths> ] [ <af-peer-networks> ] [ <af-peer-aggregates> ] [ <af-export-rmap> ] [ <af-import-rmap> ] [ <af-retain-rt> ] TABLE_saf <safi> [ <af-name> ] [ <tableversion> ] [ <configuredpeers> ] [ <capablepeers> ] [ <totalnetworks> ] [ <totalpaths> ] [ <memoryused> ] [ <numberattrs> ] [ <bytesattrs> ] [ <numberpaths> ] [ <bytespaths> ] [ <numbercommunities> ] [ <bytescommunities> ] [ <numberclusterlist> ] [ <bytesclusterlist> ] [ <dampening> ] [ <historypaths> ] [ <dampenedpaths> ] [ <softreconfigrecvdpaths> ] [ <softreconfigidenticalpaths> ] [ <softreconfigcombopaths> ] [ <softreconfigfilteredrecvd> ] [ <softreconfigbytes> ] [ TABLE_neighbor <neighborid> [ <neighborversion> ] [ <msgrecvd> ] [ <msgsent> ] [ <neighbortableversion> ] [ <inq> ] [ <outq> ] [ <neighboras> ] [ <time> ] [ <state> ] [ <prefixreceived> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

summary

Display summarized information of BGP state

ip

Display BGP information for IPv4 address family

ipv4

Display BGP information for IPv4 address family

vpnv4

Display BGP information for VPNv4 address family

vpnv6

Display BGP information for VPNv6 address family

ipv6

Display BGP information for IPv6 address family

unicast

Display BGP information for unicast address family

multicast

Display BGP information for multicast address family

labeled-unicast

Display BGP information for labeled-unicast address family

mdt

Display BGP information for multicast distribution tree

link-state

Display BGP information for link-state address family

l2vpn

Display BGP information for L2VPN address family

vpls

Display BGP information for L2VPN VPLS address family

mvpn

Display BGP information for MVPN address family

l2vpn

Display BGP information for L2VPN address family

evpn

Display BGP information for L2VPN EVPN address family

all

Display BGP information for all address families

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional) VRF name

vrf-id

(Optional) VRF ID

vrf-state

(Optional) VRF State

vrf-state-rsn

(Optional) VRF State Reason

vrf-delete-pending

(Optional) VRF delete pending

vrf-vni-id

(Optional) VRF VNI ID

vrf-vni-id-valid

(Optional) VRF VNI ID validity

vrf-encap-type

(Optional) VRF encapsulation type

vrf-vtep-ip

(Optional) VRF VTEP IP

vrf-vtep-virtual-ip

(Optional) VRF VTEP Virtual IP

vrf-router-mac

(Optional) VRF Router MAC

vrf-router-id

(Optional) Router ID

vrf-cfgd-id

(Optional) Configured Router-ID

vrf-local-as

(Optional) Local AS

vrf-confed-id

(Optional) Cluster-ID

vrf-cluster-id

(Optional) Cluster-ID

vrf-reconnect-interval

(Optional) VRF reconnect interval

vrf-peers

(Optional) No. of configured peers

vrf-pending-peers

(Optional) No. of pending peers

vrf-est-peers

(Optional) No. of established peers

vrf-cfgd-max-as-limit

(Optional) Configured maxas-limit

vrf-max-as-limit

(Optional) Active maxas-limit

vrf-rd

(Optional) VRF RD

vrf-pending-rd

(Optional) VRF pending RD

TABLE_af

(Optional)

af-id

(Optional) AF ID

af-table-id

(Optional) AF table

af-name

(Optional) AF table name

af-state

(Optional) AF table state

af-state-rsn

(Optional) AF table state reason

af-num-peers

(Optional) No. of peers

af-num-active-peers

(Optional) No. of active peers

af-peer-routes

(Optional) No. of peer routes

af-peer-paths

(Optional) No. of peer paths

af-peer-networks

(Optional) No. of peer networks

af-peer-aggregates

(Optional) No. of aggregates

af-export-rmap

(Optional) Export route-map

af-import-rmap

(Optional) Import route-map

af-retain-rt

(Optional) Retain RT

TABLE_saf

(Optional)

safi

(Optional)

af-name

(Optional)

tableversion

(Optional)

configuredpeers

(Optional)

capablepeers

(Optional)

totalnetworks

(Optional)

totalpaths

(Optional)

memoryused

(Optional)

numberattrs

(Optional)

bytesattrs

(Optional)

numberpaths

(Optional)

bytespaths

(Optional)

numbercommunities

(Optional)

bytescommunities

(Optional)

numberclusterlist

(Optional)

bytesclusterlist

(Optional)

dampening

(Optional)

historypaths

(Optional)

dampenedpaths

(Optional)

softreconfigrecvdpaths

(Optional)

softreconfigidenticalpaths

(Optional)

softreconfigcombopaths

(Optional)

softreconfigfilteredrecvd

(Optional)

softreconfigbytes

(Optional)

TABLE_neighbor

(Optional)

neighborid

(Optional)

neighborversion

(Optional)

neighboras

(Optional)

msgrecvd

(Optional)

msgsent

(Optional)

neighbortableversion

(Optional)

inq

(Optional)

outq

(Optional)

time

(Optional)

state

(Optional)

prefixreceived

(Optional)

Command Mode

- /exec

show boot

show boot [ __readonly__ { [ TABLE_bootvar_show <Str1> ] } ]

Syntax Description

Syntax Description

show

Show running system information

boot

Show Bootvar Variables

__readonly__

(Optional)

TABLE_bootvar_show

(Optional) Bootvar table

Str1

(Optional)

Command Mode

- /exec

show boot auto-copy

show boot auto-copy [ __readonly__ { [ TABLE_auto_copy <Str1> ] } ]

Syntax Description

Syntax Description

show

Show running system information

boot

Show Bootvar Variables

auto-copy

See if autocopy is turned on

__readonly__

(Optional)

TABLE_auto_copy

(Optional) Auto copy table

Str1

(Optional)

Command Mode

- /exec

show boot auto-copy list

show boot auto-copy list [ __readonly__ { [ TABLE_auto_copy_list <Str1> ] } ]

Syntax Description

Syntax Description

show

Show running system information

boot

Show Bootvar Variables

auto-copy

See if autocopy is turned on

list

Show the list of files to be auto-copied

__readonly__

(Optional)

TABLE_auto_copy_list

(Optional) Auto copy table

Str1

(Optional)

Command Mode

- /exec

show boot current

show boot current [ __readonly__ { [ TABLE_bootvar_current <Str1> ] } ]

Syntax Description

Syntax Description

show

Show running system information

boot

Show Bootvar Variables

current

Show Current Bootvar Variables

__readonly__

(Optional)

TABLE_bootvar_current

(Optional) Bootvar current table

Str1

(Optional)

Command Mode

- /exec

show boot mode

show boot mode [ __readonly__ { [ TABLE_mode <Str1> ] } ]

Syntax Description

Syntax Description

show

Show boot mode information

boot

Show boot mode

mode

See if lxc boot is turned on

__readonly__

(Optional)

TABLE_mode

(Optional) boot mode table

Str1

(Optional)

Command Mode

- /exec

show boot module

show boot module [ [ <module> ] [ <s0> ] [ __readonly__ { [ TABLE_show_mod <Str1> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

boot

Show Bootvar Variables

module

Enter module to show config of all modules

module

(Optional) Enter module number to show config

s0

(Optional) Enter module keyword to show config

__readonly__

(Optional)

TABLE_show_mod

(Optional) Show Module table

Str1

(Optional)

Command Mode

- /exec

show boot order

show boot order [ __readonly__ { [ TABLE_bootvar_order <Str1> ] } ]

Syntax Description

Syntax Description

show

Show running system information

boot

Show Bootvar Variables

order

Show Boot Order

__readonly__

(Optional)

TABLE_bootvar_order

(Optional) Boot order table

Str1

(Optional)

Command Mode

- /exec

show boot sup-1

show boot sup-1 [ __readonly__ { [ TABLE_show_sup1 <Str1> ] } ]

Syntax Description

Syntax Description

show

Show running system information

boot

Show Bootvar Variables

sup-1

Enter sup-1 to show the 1st sup config

__readonly__

(Optional)

TABLE_show_sup1

(Optional) Show Sup-1 bootvar table

Str1

(Optional)

Command Mode

- /exec

show boot sup-2

show boot sup-2 [ __readonly__ { [ TABLE_show_sup2 <Str1> ] } ]

Syntax Description

Syntax Description

show

Show running system information

boot

Show Bootvar Variables

sup-2

Enter sup-2 to show the 2nd sup config

__readonly__

(Optional)

TABLE_show_sup2

(Optional) Show Sup-22 bootvar table

Str1

(Optional)

Command Mode

- /exec

show boot timings

show boot timings

Syntax Description

Syntax Description

show

Show running system information

boot

show boot information

timings

show boot timings

Command Mode

- /exec

show boot variables

show boot variables [ __readonly__ { [ TABLE_boot_vars <Str1> ] } ]

Syntax Description

Syntax Description

show

Show running system information

boot

Show Bootvar Variables

variables

Display the list of boot variables

__readonly__

(Optional)

TABLE_boot_vars

(Optional) Show boot variables table

Str1

(Optional)

Command Mode

- /exec

show bootmode

show bootmode [ module <module> ] [ __readonly__ { TABLE_bootmode_info <mod_num> <bootmode> } ]

Syntax Description

Syntax Description

show

Show running system information

bootmode

show bootmode of the all linecard modules

module

(Optional) show bootmode of a specific linecard module

module

(Optional) please enter module number

__readonly__

(Optional)

TABLE_bootmode_info

(Optional)

mod_num

(Optional)

bootmode

(Optional)

Command Mode

- /exec

show buffers ip

show buffers ip [ { [ all <count> ] [ free <count> ] } ]

Syntax Description

Syntax Description

show

Show running system information

buffers

Display detailed buffer statistics

ip

Display IP buffer information

all

(Optional) Dump buffers from ALL list

free

(Optional) Dump buffers from FREE list

count

(Optional) Number of buffers to dump

Command Mode

- /exec

Chapter 4. C Show Commands

- show callhome

- show callhome destination-profile

- show callhome destination-profile profile

- show callhome destination-profile profile CiscoTAC-1

- show callhome destination-profile profile full-txt-destination

- show callhome destination-profile profile short-txt-destination

- show callhome transport-email

- show callhome transport

- show callhome user-def-cmds

- show catena

- show cdp

- show cdp all

- show cdp global

- show cdp internal event-history debugs

- show cdp internal event-history errors

- show cdp internal event-history msgs

- show cdp internal global-info

- show cdp internal mem-stats

- show cdp internal runtime-contexts

- show cdp neighbors

- show cdp neighbors detail

- show cdp traffic interface2

- show cfs application

- show cfs internal application

- show cfs internal ethernet-peer

- show cfs internal event-history errors

- show cfs internal event-history init

- show cfs internal event-history merge

- show cfs internal event-history msgs

- show cfs internal event-history notif

- show cfs internal ip database

- show cfs internal mem-stats

- show cfs internal merge log name

- show cfs internal message-context name

- show cfs internal notification log name

- show cfs internal remote application

- show cfs internal session-history name

- show cfs internal static-peers info

- show cfs internal statistics

- show cfs internal vsan database

- show cfs lock

- show cfs merge status

- show cfs peers

- show cfs regions

- show cfs remote-app vsan domain

- show cfs remote-switches vsan

- show cfs static peers

- show cfs status

- show checkpoint

- show checkpoint

- show checkpoint summary

- show class-map

- show class-map type control-plane

- show class-map type network-qos

- show class-map type psp

- show cli alias

- show cli dynamic integers

- show cli dynamic strings

- show cli history

- show cli interface table

- show cli internal ishow cli ctags

- show cli internal ishow cli dynamic-keywords

- show cli internal ishow cli pid

- show cli internal ishow cli pss

- show cli internal ishow cli sdb

- show cli internal ishow cli server

- show cli internal last-command status

- show cli internal mem-stats

- show cli internal sdwrap

- show cli list

- show cli registry

- show cli syntax

- show cli variables

- show clock

- show clock utc

- show config-profile

- show config-profile applied

- show configuration session

- show configuration session

- show configuration session global-info

- show configuration session nx-api rest

- show configuration session nx-yang json

- show configuration session status

- show configuration session summary

- show configuration session vsh

- show consistency-checker copp

- show consistency-checker fex-interfaces fex

- show consistency-checker forwarding recover

- show consistency-checker l2-tahoe module

- show consistency-checker l2-tahoe switchport interface

- show consistency-checker l3-interface module

- show consistency-checker link-state module

- show consistency-checker membership port-channels

- show consistency-checker membership vlan

- show consistency-checker nxapi interface

- show consistency-checker pacl module

- show consistency-checker pacl port-channels

- show consistency-checker port-security

- show consistency-checker qinvni

- show consistency-checker racl module

- show consistency-checker racl port-channels

- show consistency-checker stp-state vlan

- show consistency-checker vacl

- show consistency-checker vxlan bgp

- show consistency-checker vxlan interface

- show consistency-checker vxlan mh mac-addresses

- show consistency-checker vxlan mh pathlist

- show consistency-checker vxlan peers

- show consistency-checker vxlan routes

- show consistency-checker vxlan selective-qinvni

- show consistency-checker vxlan selective-qinvni interface

- show consistency-checker vxlan vlan

- show controller accounting log

- show copp diff profile profile2

- show copp profile

- show copp status

- show copyright

- show cores

- show crypto ca certificates

- show crypto ca certificates

- show crypto ca certstore

- show crypto ca crl

- show crypto ca internal certificates

- show crypto ca remote-certstore

- show crypto ca trustpoints

- show crypto certificatemap

- show crypto key mypubkey rsa

- show crypto ssh-auth-map

- show current

show callhome

show callhome [ __readonly__ <output_state> <info> <per_name> [ <name> ] <email_info> [ <email_conf> ] <ph_info> [ <ph_conf> ] <str_addr> [ <str_conf> ] <site_id> [ <site_id_conf> ] <cust_id> [ <cus_id_conf> ] <contr_id> [ <contr_id_conf> ] <swi_pri> [ <swi_pri_value> ] <dup_mess> <per_inv> <per_time> <per_timeofday> <dist> ]

Syntax Description

Syntax Description

show

Show running system information

callhome

Show callhome information

__readonly__

(Optional)

output_state

(Optional)

info

(Optional)

per_name

(Optional)

name

(Optional)

email_info

(Optional)

email_conf

(Optional)

ph_info

(Optional)

ph_conf

(Optional)

str_addr

(Optional)

str_conf

(Optional)

site_id

(Optional)

site_id_conf

(Optional)

cust_id

(Optional)

cus_id_conf

(Optional)

contr_id

(Optional)

contr_id_conf

(Optional)

swi_pri

(Optional)

swi_pri_value

(Optional)

dup_mess

(Optional)

per_inv

(Optional)

per_time

(Optional)

per_timeofday

(Optional)

dist

(Optional)

Command Mode

- /exec

show callhome destination-profile

show callhome destination-profile [ __readonly__ { TABLE_call_info [ <dest_full_info> ] [ <dest_short_info> ] [ <dest_xml_info> ] [ <dest_def_info> ] <max_mess_size> <mess_format> <mess_level> <trans_method> <email_info> [ <email_conf> ] <url_info> [ <url_conf> ] <alert_groups> [ <alert_conf> ] } ]

Syntax Description

Syntax Description

show

Show running system information

callhome

Show callhome information

destination-profile

Show callhome destination profile information

__readonly__

(Optional)

TABLE_call_info

(Optional)

dest_full_info

(Optional)

dest_short_info

(Optional)

dest_xml_info

(Optional)

dest_def_info

(Optional)

max_mess_size

(Optional)

mess_format

(Optional)

mess_level

(Optional)

trans_method

(Optional)

email_info

(Optional)

email_conf

(Optional)

url_info

(Optional)

url_conf

(Optional)

alert_groups

(Optional)

alert_conf

(Optional)

Command Mode

- /exec

show callhome destination-profile profile

show callhome destination-profile profile <s0> [ __readonly__ <user_txt_info> <max_mess_size> <mess_format> <mess_level> <trans_method> <email_info> [ TABLE_email [ <email_conf> ] ] <url_info> [ TABLE_url [ <url_conf> ] ] <alert_groups> [ TABLE_alert [ <alert_conf> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

callhome

Show callhome information

destination-profile

Show callhome destination profile information

profile

Specify the destination profile

s0

Show information for user defined destination profile

__readonly__

(Optional)

user_txt_info

(Optional)

max_mess_size

(Optional)

mess_format

(Optional)

mess_level

(Optional)

trans_method

(Optional)

email_info

(Optional)

TABLE_email

(Optional)

email_conf

(Optional)

url_info

(Optional)

TABLE_url

(Optional)

url_conf

(Optional)

alert_groups

(Optional)

TABLE_alert

(Optional)

alert_conf

(Optional)

Command Mode

- /exec

show callhome destination-profile profile CiscoTAC-1

show callhome destination-profile profile CiscoTAC-1 [ __readonly__ <tac_xml_info> <max_mess_size> <mess_level> <trans_method> <email_info> [ <email_conf> ] <url_info> [ <url_conf> ] <alert_groups> [ <alert_conf> ] ]

Syntax Description

Syntax Description

show

Show running system information

callhome

Show callhome information

destination-profile

Show callhome destination profile information

profile

Specify the destination profile

CiscoTAC-1

Show information for CiscoTAC-1 destination profile

__readonly__

(Optional)

tac_xml_info

(Optional)

max_mess_size

(Optional)

mess_level

(Optional)

trans_method

(Optional)

email_info

(Optional)

email_conf

(Optional)

url_info

(Optional)

url_conf

(Optional)

alert_groups

(Optional)

alert_conf

(Optional)

Command Mode

- /exec

show callhome destination-profile profile full-txt-destination

show callhome destination-profile profile full-txt-destination [ __readonly__ <full_txt_info> <max_mess_size> <mess_level> <trans_method> <email_info> [ <email_conf> ] <url_info> [ <url_conf> ] <alert_groups> [ <alert_conf> ] ]

Syntax Description

Syntax Description

show

Show running system information

callhome

Show callhome information

destination-profile

Show callhome destination profile information

profile

Specify the destination profile

full-txt-destination

Show information for full-txt-destination destination profile

__readonly__

(Optional)

full_txt_info

(Optional)

max_mess_size

(Optional)

mess_level

(Optional)

trans_method

(Optional)

email_info

(Optional)

email_conf

(Optional)

url_info

(Optional)

url_conf

(Optional)

alert_groups

(Optional)

alert_conf

(Optional)

Command Mode

- /exec

show callhome destination-profile profile short-txt-destination

show callhome destination-profile profile short-txt-destination [ __readonly__ <shrt_txt_info> <max_mess_size> <mess_level> <trans_method> <email_info> [ <email_conf> ] <url_info> [ <url_conf> ] <alert_groups> [ <alert_conf> ] ]

Syntax Description

Syntax Description

show

Show running system information

callhome

Show callhome information

destination-profile

Show callhome destination profile information

profile

Specify the destination profile

short-txt-destination

Show information for short-txt-destination destination profile

__readonly__

(Optional)

shrt_txt_info

(Optional)

max_mess_size

(Optional)

mess_level

(Optional)

trans_method

(Optional)

email_info

(Optional)

email_conf

(Optional)

url_info

(Optional)

url_conf

(Optional)

alert_groups

(Optional)

alert_conf

(Optional)

Command Mode

- /exec

show callhome transport-email

show callhome transport-email [ __readonly__ { <from_email> } [ <reply_to_email> ] [ <return_receipt_addr> ] { <smtp_server> } [ <smtp_server_port> ] ]

Syntax Description

Syntax Description

__readonly__

(Optional)

show

Show running system information

callhome

Show callhome information

transport-email

Show callhome email transport configuration

from_email

(Optional)

reply_to_email

(Optional)

return_receipt_addr

(Optional)

smtp_server

(Optional)

smtp_server_port

(Optional)

Command Mode

- /exec

show callhome transport

show callhome transport [ __readonly__ <vrf> <from_email> [ <rep_email> ] [ <ret_email> ] [ <smtp_ser> ] [ <smtp_ser_port> ] [ <smtp_ser_vrf> ] [ <smtp_ser_prior> ] [ <smtp_ser_do> ] [ <smtp_ser_port_do> ] [ <smtp_ser_vrf_do> ] [ <smtp_ser_prior_do> ] [ <smtp_ser_got> ] [ <smtp_ser_port_got> ] [ <smtp_ser_vrf_got> ] [ <smtp_ser_prior_got> ] <http_prox> <http_port> <http_state> ]

Syntax Description

Syntax Description

show

Show running system information

callhome

Show callhome information

transport

Show callhome transport configuration (email and http)

__readonly__

(Optional)

vrf

(Optional)

from_email

(Optional)

rep_email

(Optional)

ret_email

(Optional)

smtp_ser

(Optional)

smtp_ser_port

(Optional)

smtp_ser_vrf

(Optional)

smtp_ser_prior

(Optional)

smtp_ser_do

(Optional)

smtp_ser_port_do

(Optional)

smtp_ser_vrf_do

(Optional)

smtp_ser_prior_do

(Optional)

smtp_ser_got

(Optional)

smtp_ser_port_got

(Optional)

smtp_ser_vrf_got

(Optional)

smtp_ser_prior_got

(Optional)

http_prox

(Optional)

http_port

(Optional)

http_state

(Optional)

Command Mode

- /exec

show callhome user-def-cmds

show callhome user-def-cmds

Syntax Description

Syntax Description

show

Show running system information

callhome

Show callhome information

user-def-cmds

Show the cli commands configured for each alert group

Command Mode

- /exec

show catena

show catena <instance-name> [ brief ] [ __readonly__ <instance_name> <state> { TABLE_chain <chain> [ TABLE_rule <seqno> <aclname> <whichconfig> [ <vlan_group> ] [ <ingress_port> ] [ <egress_port> ] [ <egress_device> ] [ <mode> ] ] } ]

Syntax Description

Syntax Description

show

Show running system information

catena

catena

instance-name

instance name

brief

(Optional) brief

__readonly__

(Optional) Read Only

instance_name

(Optional) instance_name

state

(Optional) status

TABLE_chain

(Optional)

chain

(Optional) chain

TABLE_rule

(Optional)

seqno

(Optional) seqno

aclname

(Optional) aclname

whichconfig

(Optional) whichconfig

vlan_group

(Optional) vlangrp

ingress_port

(Optional) ingress_portgrp

egress_port

(Optional) egress_portgrp

egress_device

(Optional) egress_device

mode

(Optional) mode

Command Mode

- /exec

show cdp

show cdp { entry { all1 | name <s0> } } [ __readonly__ TABLE_cdp_entry_all <device_id> [ <sysname> ] [ { <v4addr> | <v6addr> } + ] <platform_id> <capability> + <intf_id> <port_id> <ttl> <version> <version_no> [ <nativevlan> ] [ <vtpname> ] [ <duplexmode> ] [ <syslocation> ] [ { <v4mgmtaddr> | <v6mgmtaddr> } + ] ]

Syntax Description

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

entry

Show CDP entries in database

all1

Show all CDP entries in database

name

Show a specific CDP entry matching a name

s0

__readonly__

(Optional) Read only

TABLE_cdp_entry_all

(Optional) output of show cdp entry all

device_id

(Optional) Device Identifier

sysname

(Optional) System Name

v4addr

(Optional) Interface IP V4 Address

v6addr

(Optional) Interface IP V6 Address

platform_id

(Optional) Platform Id

capability

(Optional) Capability

intf_id

(Optional) Interface Id

port_id

(Optional) Port Identifier

ttl

(Optional) Hold Time

version

(Optional) Software Version

version_no

(Optional) CDP version number

nativevlan

(Optional) NativeVLAN

vtpname

(Optional) Vtp Management Domain Name

duplexmode

(Optional) Duplex Mode

syslocation

(Optional) System Location

v4mgmtaddr

(Optional) IP V4 Mgmt Address

v6mgmtaddr

(Optional) IP V6 Mgmt Address

Command Mode

- /exec

show cdp all

show cdp { all | interface <if0> } [ __readonly__ TABLE_cdp_all <intf_id> <port_up> [ <cdp_global_enabled> ] <cdp_intf_enabled> [ <oper_mode> ] <refresh_time> <ttl> ]

Syntax Description

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

all

Show all interfaces in CDP database

interface

Show CDP parameters for an interface

if0

__readonly__

(Optional) Read only

TABLE_cdp_all

(Optional) output of show cdp all

intf_id

(Optional) Interface Id

port_up

(Optional) Port status

cdp_global_enabled

(Optional) CDP global status

cdp_intf_enabled

(Optional) CDP interface status

oper_mode

(Optional) CDP operation mode

refresh_time

(Optional) Refresh Time

ttl

(Optional) Hold Time

Command Mode

- /exec

show cdp global

show cdp global [ __readonly__ <cdp_global_enabled> <refresh_time> <ttl> <v2_advertisement> <deviceid_format> ]

Syntax Description

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

global

Show CDP global parameters

__readonly__

(Optional) Read only

cdp_global_enabled

(Optional) CDP global status

refresh_time

(Optional) Refresh Time

ttl

(Optional) Hold Time

v2_advertisement

(Optional) Show v2 advertisement

deviceid_format

(Optional) Show deviceId Format

Command Mode

- /exec

show cdp internal event-history debugs

show cdp internal event-history debugs

Syntax Description

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

internal

Commands for internal use

event-history

switch wide event history configuration

debugs

Debug msgs of CDP

Command Mode

- /exec

show cdp internal event-history errors

show cdp internal event-history errors

Syntax Description

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

internal

Commands for internal use

event-history

switch wide event history configuration

errors

Error logs of CDP

Command Mode

- /exec

show cdp internal event-history msgs

show cdp internal event-history msgs

Syntax Description

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

internal

Commands for internal use

event-history

switch wide event history configuration

msgs

MTS logs of CDP

Command Mode

- /exec

show cdp internal global-info

show cdp internal global-info

Syntax Description

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

internal

Commands for internal use

global-info

globally stored data

Command Mode

- /exec

show cdp internal mem-stats

show cdp internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

internal

Commands for internal use

mem-stats

Show memory allocation statistics for CDP

detail

(Optional) Show detail memstats for CDP

Command Mode

- /exec

show cdp internal runtime-contexts

show cdp internal runtime-contexts [ interface <if> ]

Syntax Description

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

internal

Commands for internal use

runtime-contexts

runtime contexts dump

interface

(Optional) runtime context dump for an interface

if

(Optional)

Command Mode

- /exec

show cdp neighbors

show cdp neighbors [ interface <if> ] [ __readonly__ { TABLE_cdp_neighbor_brief_info <ifindex> <device_id> <intf_id> <ttl> <capability> + <platform_id> <port_id> } { <neigh_count> } ]

Syntax Description

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

neighbors

Show CDP neighbors

interface

(Optional) Show CDP neighbors on an interface

if

(Optional) Specify Interface

__readonly__

(Optional) Read only

TABLE_cdp_neighbor_brief_info

(Optional) output of show cdp neighbor - in breif

ifindex

(Optional) Interface index

device_id

(Optional) System Name (or) Device Identifier

intf_id

(Optional) Interface Id

port_id

(Optional) Port Identifier

platform_id

(Optional) Platform Id

ttl

(Optional) Hold Time

capability

(Optional) Capability

neigh_count

(Optional) Neighbor Count

Command Mode

- /exec

show cdp neighbors detail

show cdp neighbors [ interface <if> ] detail [ __readonly__ TABLE_cdp_neighbor_detail_info <ifindex> <device_id> [ <sysname> ] [ <vtpname> ] <numaddr> { <v4addr> | <v6addr> } + <platform_id> <capability> + <intf_id> <port_id> <ttl> <version> <version_no> [ <nativevlan> ] [ <duplexmode> ] [ <mtu> ] [ <syslocation> ] [ <num_mgmtaddr> { <v4mgmtaddr> | <v6mgmtaddr> } + ] ]

Syntax Description

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

neighbors

Show CDP neighbors

detail

Show CDP neighbors detailed

interface

(Optional) Show CDP neighbors on an interface

if

(Optional) Specify Interface

__readonly__

(Optional) Read only

TABLE_cdp_neighbor_detail_info

(Optional) output of show cdp neighbor detail

ifindex

(Optional) Interface index

device_id

(Optional) Device Identifier

sysname

(Optional) System Name

vtpname

(Optional) Vtp Management Domain Name

numaddr

(Optional) No of IP Address configured

v4addr

(Optional) Interface IP V4 Address

v6addr

(Optional) Interface IP V6 Address

platform_id

(Optional) Platform Id

capability

(Optional) Capability

intf_id

(Optional) Interface Id

port_id

(Optional) Port Identifier

ttl

(Optional) Hold Time

version

(Optional) Software Version

version_no

(Optional) CDP version number

nativevlan

(Optional) NativeVLAN

duplexmode

(Optional) Duplex Mode

mtu

(Optional) MTU

syslocation

(Optional) System Location

num_mgmtaddr

(Optional) No of Mgmt Address configured

v4mgmtaddr

(Optional) IP V4 Mgmt Address

v6mgmtaddr

(Optional) IP V6 Mgmt Address

Command Mode

- /exec

show cdp traffic interface2

show cdp traffic interface2 <if2> [ __readonly__ <intf_id> <total_input_packets> <valid_cdp_packets> <input_v1_packets> <input_v2_packets> <invalid_cdp_packets> <unsupported_version> <checksum_errors> <malformed_packets> <total_output_packets> <output_v1_packets> <output_v2_packets> <send_errors> ]

Syntax Description

Syntax Description

show

Show running system information

cdp

Show Cisco Discovery Protocol information

traffic

Show CDP traffic statistics

interface2

Show CDP traffic statistics on an interface

if2

__readonly__

(Optional) Read only

intf_id

(Optional) Interface Id

total_input_packets

(Optional) Total input cdp packets

valid_cdp_packets

(Optional) Total valid cdp packets

input_v1_packets

(Optional) Input vesrion1 packets

input_v2_packets

(Optional) Input vesrion2 packets

invalid_cdp_packets

(Optional) Invalid cdp packets

unsupported_version

(Optional) Packets having unsupported version

checksum_errors

(Optional) Packets having checksum errors

malformed_packets

(Optional) Total malformed packets

total_output_packets

(Optional) Total output packets

output_v1_packets

(Optional) Output vesrion1 packets

output_v2_packets

(Optional) Output vesrion2 packets

send_errors

(Optional) Number of send errors

Command Mode

- /exec

show cfs application

show cfs application [ { name <cfs-dyn-app-name> | sap <i0> } ] [ __readonly__ [ { enabled <enabled> } { timeout <timeout> } { merge_capable <merge_capable> } { scope <scope> } { region <region> } ] [ { TABLE_apps <app_name> <app_enabled> <app_scope> } ] ]

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

application

Show locally registered applications

name

(Optional) Show local application information by name

cfs-dyn-app-name

(Optional) Registered name of the local application

sap

(Optional) Show local application information by sap

i0

(Optional) Registered sap of the local application

__readonly__

(Optional)

enabled

(Optional) whether application is CFS enabled

enabled

(Optional) whether application is CFS enabled

timeout

(Optional) timeout

timeout

(Optional) timeout

merge_capable

(Optional) merge_capable

merge_capable

(Optional) merge_capable

scope

(Optional) scope

scope

(Optional) scope

region

(Optional) region

region

(Optional) region

TABLE_apps

(Optional) all cfs applications

app_name

(Optional) name of cfs application

app_enabled

(Optional) whether application is cfs enabled

app_scope

(Optional) distribution scope of cfs application

Command Mode

- /exec

show cfs internal application

show cfs internal application [ { name <cfs-dyn-app-name> | sap <i1> } ]

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

internal

Show internal infomation

application

Show detail information of a given application

name

(Optional) Show detail information of a given application

cfs-dyn-app-name

(Optional) Registered name of the local application

sap

(Optional) show detail information of a application for given sap

i1

(Optional) SAP

Command Mode

- /exec

show cfs internal ethernet-peer

show cfs internal ethernet-peer { database | statistics | error-statistics | event-log }

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

internal

Show internal infomation

ethernet-peer

Show details of vpc peers

database

Show details of vpc peer database

statistics

Show statistics of eth peer

error-statistics

Show Error statistics of eth peer

event-log

Show event log

Command Mode

- /exec

show cfs internal event-history errors

show cfs internal event-history errors

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

internal

Show internal infomation

event-history

Show event history

errors

Show error event history

Command Mode

- /exec

show cfs internal event-history init

show cfs internal event-history init [ { ip | ethernet-discovery | transmission } ]

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

internal

Show internal infomation

event-history

Show event history

init

Show initialization event history

ip

(Optional) Show initialization event history for ip

ethernet-discovery

(Optional) Show initialization event history for ethernet discovery

transmission

(Optional) Show event history for ethernet transmissions

Command Mode

- /exec

show cfs internal event-history merge

show cfs internal event-history merge [ { [ name <cfs-dyn-app-name> ] | [ sap <i1> ] } ]

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

internal

Show internal infomation

event-history

Show event history

merge

Show merge event history

name

(Optional) Show merge event history for the given name

cfs-dyn-app-name

(Optional) Registered name of the local application

sap

(Optional) Show merge event history for the given sap

i1

(Optional) SAP of the application

Command Mode

- /exec

show cfs internal event-history msgs

show cfs internal event-history msgs

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

internal

Show internal infomation

event-history

Show event history

msgs

Show various message logs

Command Mode

- /exec

show cfs internal event-history notif

show cfs internal event-history notif [ { name <cfs-dyn-app-name> | sap <i0> } ]

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

internal

Show internal infomation

event-history

Show event history

notif

Show physical notification event history

name

(Optional) Show physical notification event history for a given name

cfs-dyn-app-name

(Optional) Registered name of the local application

sap

(Optional) Show physical notification event history for a given sap

i0

(Optional) SAP of the application

Command Mode

- /exec

show cfs internal ip database

show cfs internal ip database

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

internal

Show internal infomation

ip

Show details of IP

database

Show details of IP database

Command Mode

- /exec

show cfs internal mem-stats

show cfs internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

internal

Show internal infomation

mem-stats

Show memory statistics

detail

(Optional) Show detailed memory statistics

Command Mode

- /exec

show cfs internal merge log name

show cfs internal merge log { name <cfs-dyn-app-name> | sap <i1> }

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

internal

Show internal infomation

merge

Show cfs internal info in merge

log

Show merge logs

name

Show merge log for given name

cfs-dyn-app-name

Registered name of the local application

sap

Show merge log for given sap

i1

SAP of the application

Command Mode

- /exec

show cfs internal message-context name

show cfs internal message-context { name <cfs-dyn-app-name> | sap <i0> }

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

internal

Show internal infomation

message-context

Show current message context details

name

Show current message contexts for given application

cfs-dyn-app-name

Registered name of the local application

sap

Show current message contexts for given sap

i0

SAP

Command Mode

- /exec

show cfs internal notification log name

show cfs internal notification log { name <cfs-dyn-app-name> | sap <i1> }

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

internal

Show internal infomation

notification

Show cfs internal info in notification

log

Show notification logs

name

Show notification log for given name

cfs-dyn-app-name

Registered name of the local application

sap

Show merge log for given sap

i1

SAP of the application

Command Mode

- /exec

show cfs internal remote application

show cfs internal remote application

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

internal

Show internal infomation

remote

Show cfs information on remote

application

Show remote cfs applications

Command Mode

- /exec

show cfs internal session-history name

show cfs internal session-history { name <cfs-dyn-app-name> [ { detail } ] | sap <i1> [ { detail2 } ] }

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

internal

Show internal infomation

session-history

Show session history

name

Show session history for given name

cfs-dyn-app-name

Registered name of the local application

detail

(Optional) Show detailed session history for given name

sap

Show session history for given SAP

i1

SAP

detail2

(Optional) Show detailed session history

Command Mode

- /exec

show cfs internal static-peers info

show cfs internal static-peers { info | log }

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

internal

Show internal infomation

static-peers

Show detailed information of static peers

info

Show detailed information of static peers

log

Show event history of static peers

Command Mode

- /exec

show cfs internal statistics

show cfs internal statistics [ { name <s0> | sap <i1> } ]

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

internal

Show internal infomation

statistics

Show application stats

name

(Optional) Show application stats

s0

(Optional) name

sap

(Optional) show sap stats

i1

(Optional) SAP

Command Mode

- /exec

show cfs internal vsan database

show cfs internal vsan database

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

internal

Show internal infomation

vsan

Show internal vsan info

database

Show internal vsan database

Command Mode

- /exec

show cfs lock

show cfs lock [ { name <cfs-dyn-app-name> | sap <i1> } ] [ __readonly__ [ { TABLE_locks [ <app_name> ] <app_scope> [ <vsan> ] [ <domain> ] [ <wwn> ] <ip_addr> <u_name> <u_type> [ <hostname> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

lock

Show state of application's logical/physical locks

name

(Optional) Application name for which the lock status is required

cfs-dyn-app-name

(Optional) Registered name of the local application

sap

(Optional) Application sap for which the lock status is required

i1

(Optional) Application SAP

__readonly__

(Optional)

TABLE_locks

(Optional) table of all CFS locks

app_name

(Optional) name of CFS application

app_scope

(Optional) scope of CFS application

vsan

(Optional) vsan

domain

(Optional) domain

wwn

(Optional) wwn of switch holding CFS lock

ip_addr

(Optional) ip address of switch holding CFS lock

u_name

(Optional) user name

u_type

(Optional) user type

hostname

(Optional) hostname

Command Mode

- /exec

show cfs merge status

show cfs merge status [ { name <cfs-dyn-app-name> [ detail ] | sap <i1> [ detail2 ] } ] [ __readonly__ [ { scope <scope> } ] [ { merge_status <status> } ] [ { failure_reason <reason> } ] [ { TABLE_all_merge <app_name> <scope> <vsan> <status> } ] [ { TABLE_local_fabric [ <domain> ] <wwn> <ip_addr> <app_scope> [ <master> ] [ <hostname> ] } ] [ { TABLE_remote_fabric [ <domain> ] <wwn> <ip_addr> <app_scope> [ <master> ] [ <hostname> ] } ] [ { TABLE_remaining_fabric [ <domain> ] <wwn> <ip_addr> [ <hostname> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

merge

Show cfs merge information

status

Show status of merge

name

(Optional) Show merge status by name

cfs-dyn-app-name

(Optional) Registered name of the local application

detail

(Optional) Show merge status by name in detail

sap

(Optional) Show merge status by sap

i1

(Optional) Application sap

detail2

(Optional) Show merge status by sap in detail

__readonly__

(Optional)

scope

(Optional) distribution scope of application

scope

(Optional) scope

merge_status

(Optional) status

status

(Optional) status

failure_reason

(Optional) reason

reason

(Optional) reason

TABLE_all_merge

(Optional) all

app_name

(Optional) name

scope

(Optional) scope

vsan

(Optional) vsan

status

(Optional) status

TABLE_local_fabric

(Optional) local fabric

domain

(Optional) domain

wwn

(Optional) wwn

ip_addr

(Optional) ip_addr

app_scope

(Optional) scope

master

(Optional) master

hostname

(Optional) hname

TABLE_remote_fabric

(Optional) remote fabric

domain

(Optional) domain

wwn

(Optional) wwn

ip_addr

(Optional) ip_addr

app_scope

(Optional) scope

master

(Optional) master

hostname

(Optional) hname

TABLE_remaining_fabric

(Optional) remote fabric

domain

(Optional) domain

wwn

(Optional) wwn

ip_addr

(Optional) ip_addr

hostname

(Optional) hname

Command Mode

- /exec

show cfs peers

show cfs peers [ { name <cfs-dyn-app-name> | sap <i1> } ] [ __readonly__ [ { scope <scope> } ] [ { TABLE_peers <wwn> <ip_addr> <local> [ <hostname> ] [ <domain> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

peers

Show all the peers in the physical fabric

name

(Optional) Show peers for given application name

cfs-dyn-app-name

(Optional) Registered name of the local application

sap

(Optional) Show peers for given application sap

i1

(Optional) Application sap

__readonly__

(Optional)

scope

(Optional) scope

scope

(Optional) scope

TABLE_peers

(Optional) all peers

wwn

(Optional) wwn

ip_addr

(Optional) ip_addr

local

(Optional) local

hostname

(Optional) hname

domain

(Optional) domain

Command Mode

- /exec

show cfs regions

show cfs regions [ { brief [ region <i0> ] | name <cfs-dyn-app-name> | region1 <i1> } ] [ __readonly__ [ { region <id> } ] [ { application <name> } ] [ { scope <scope> } ] [ { TABLE_PEERS <wwn> <ip_addr> <local> [ <hostname> ] [ <domain> ] } ] [ { TABLE_switches [ <wwn> ] [ <ip_addr> ] <region> <app_name> <enabled> [ <scope> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

regions

Show all the applications with peers and region information

brief

(Optional) Show all configured regions and applications(no peers)

region

(Optional) Show all configured applications(no peers)

i0

(Optional) Region Id

name

(Optional) Show peers and region information for a given application

cfs-dyn-app-name

(Optional) Registered name of the local application

region1

(Optional) Show all configured applications with peers

i1

(Optional) Region Id

__readonly__

(Optional)

region

(Optional) region

id

(Optional) id

application

(Optional) app

name

(Optional) name

scope

(Optional) scope

scope

(Optional) scope

TABLE_PEERS

(Optional) all region peers

wwn

(Optional) wwn

ip_addr

(Optional) ip_address

local

(Optional) local

hostname

(Optional) hname

domain

(Optional) domain

TABLE_switches

(Optional) all switches in region

wwn

(Optional) wwn

ip_addr

(Optional) ip_addr

region

(Optional) region

app_name

(Optional) name

enabled

(Optional) enabled

scope

(Optional) scope

Command Mode

- /exec

show cfs remote-app vsan domain

show cfs remote-app vsan <i0> domain <i1>

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

remote-app

Show remote cfs registered applications

vsan

Show remote applications given a vsan

i0

VSAN id

domain

Show remote applications

i1

Enter the domain id

Command Mode

- /exec

show cfs remote-switches vsan

show cfs remote-switches vsan <i0> [ __readonly__ { local <domain> } [ { TABLE_switches <remote_domain> <wwn> } ] ]

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

remote-switches

Show remote switches on a given vsan

vsan

Show remote switches on a given vsan

i0

VSAN id

__readonly__

(Optional)

local

(Optional) local

domain

(Optional) domain

TABLE_switches

(Optional) all remote switches

remote_domain

(Optional) rdomain

wwn

(Optional) wwn

Command Mode

- /exec

show cfs static peers

show cfs static peers

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

static

Show all static peers with status

peers

Show all configured static peers with status

Command Mode

- /exec

show cfs status

show cfs status [ __readonly__ { distribution <distribution> } { distribution_over_ip <dist_over_ip> } { ipv4_multicast_address <ipv4_mcast_addr> } { ipv6_multicast_address <ipv6_mcast_addr> } { distribution_over_ethernet <dist_over_eth> } ]

Syntax Description

Syntax Description

show

Show running system information

cfs

CFS Show Command handler

status

Show current status of CFS

__readonly__

(Optional)

distribution

(Optional) runtime status of CFS distribution

distribution

(Optional) operational status of CFS distribution

distribution_over_ip

(Optional) runtime information of CFSoIP

dist_over_ip

(Optional) operational status of CFS overIP

ipv4_multicast_address

(Optional) ipv4 multicast address

ipv4_mcast_addr

(Optional) ipv4 multicast address

ipv6_multicast_address

(Optional) ipv6 multicast address

ipv6_mcast_addr

(Optional) ipv6 multicast address

distribution_over_ethernet

(Optional) runtime status if CFSoE

dist_over_eth

(Optional) operations status of CFSoE

Command Mode

- /exec

show checkpoint

show checkpoint [ all ] [ user | system ] [ __readonly__ TABLE_checkpoint_details <name> <checkpoint_config> + ]

Syntax Description

Syntax Description

show

Show running system information

checkpoint

Show configuration rollback checkpoints

all

(Optional) Show default config

user

(Optional) Show only user configuration rollback checkpoints

system

(Optional) Show only system configuration rollback checkpoints

__readonly__

(Optional) Read only

TABLE_checkpoint_details

(Optional) checkpoint details

name

(Optional) Checkpoint name

checkpoint_config

(Optional) Configuration entry from checkpoint

Command Mode

- /exec

show checkpoint

show checkpoint <chkpoint_name> [ all ] [ __readonly__ TABLE_checkpoint_details <name1> <checkpoint_config> + ]

Syntax Description

Syntax Description

show

Show running system information

checkpoint

Show configuration rollback checkpoint contents

chkpoint_name

Checkpoint name

all

(Optional) Show default config

__readonly__

(Optional) Read only

TABLE_checkpoint_details

(Optional) Checkpoint details

name1

(Optional) Checkpoint name

checkpoint_config

(Optional) Configuration entry from checkpoint

Command Mode

- /exec

show checkpoint summary

show checkpoint summary [ user | system ] [ __readonly__ TABLE_checkpoint_header_info <name> <user_name> <timestamp> <file_path> <chkpt_type> <description> ]

Syntax Description

Syntax Description

show

Show running system information

checkpoint

Show configuration rollback checkpoints

summary

Show configuration rollback checkpoints summary

user

(Optional) Show only user configuration rollback checkpoints summary

system

(Optional) Show only system configuration rollback checkpoints summary

__readonly__

(Optional) Read only

TABLE_checkpoint_header_info

(Optional) Checkpoint header info

user_name

(Optional) Username

name

(Optional) Checkpoint name

file_path

(Optional) Checkpoint name

timestamp

(Optional) Timestamp of checkpoint creation

chkpt_type

(Optional) Type of checkpoint either user or system

description

(Optional) Checkpoint description

Command Mode

- /exec

show class-map

show class-map [ { [ type qos ] [ <cmap-name> | xxx <color-map-enum-name> ] } | { type queuing [ yyy <cmap-enum-name> | zzz <default-cmap-enum-name> | <cmap-dce-name> | <cmap-name-hque> ] } ] [ __readonly__ { [ <display-all> ] [ TABLE_cmap <cmap-key> [ <id> ] <xqos-or-q> [ <any_or_all> ] <cmap-name-out> [ <desc> ] [ TABLE_match <match-key> [ <not> ] [ <dscp-list> ] [ <precedence-list> ] [ <cos-list> ] [ <qos-group-list> ] [ <discard-class-list> ] [ <vlan-list> ] [ <match-cmap-name> ] [ <match-acl-name> ] [ <note-string> ] [ <pkt-len-list> ] [ <rtp-port-list> ] [ <prot> ] [ <input-iface-list> ] [ <exp-list> ] [ <cl-def> ] ] ] } ]

Syntax Description

Syntax Description

xxx

(Optional) xxx

yyy

(Optional) yyy

zzz

(Optional) zzz

show

Show running system information

class-map

Show class maps

type

(Optional) Type of the class-map

qos

(Optional) type qos

queuing

(Optional) type queuing

cmap-name

(Optional) class map name

cmap-enum-name

(Optional)

default-cmap-enum-name

(Optional)

cmap-dce-name

(Optional) Queuing class-map name

cmap-name-hque

(Optional) Hierarchical class-map name

color-map-enum-name

(Optional)

__readonly__

(Optional)

display-all

(Optional) Display all kinds of class-maps

TABLE_cmap

(Optional) all cmap xml sessions

cmap-key

(Optional) Class-map name: xml key

TABLE_match

(Optional) all match xml sessions

match-key

(Optional) match count: xml key

cmap-name-out

(Optional) Class-map name

xqos-or-q

(Optional)

any_or_all

(Optional) Enter match-any or match-all

id

(Optional) Class-map ID

desc

(Optional) Description string

not

(Optional) Negate this match result

dscp-list

(Optional) List of DSCP values

precedence-list

(Optional) List of precedence values

cos-list

(Optional) List of class-of-service values

qos-group-list

(Optional) List of qos-group values

discard-class-list

(Optional) List of discard-class values

vlan-list

(Optional) List of vlan-ids

match-cmap-name

(Optional) class-map name

match-acl-name

(Optional) Match class-map name

note-string

(Optional) Placeholder string param to display any info in string format

pkt-len-list

(Optional) Packet length multi-range

rtp-port-list

(Optional) IP RTP UDP port multi-range

prot

(Optional) Protocol

input-iface-list

(Optional) Input Interface multi-range

exp-list

(Optional) List of MPLS exp values

cl-def

(Optional) Match any criteria for class-default only

Command Mode

- /exec

show class-map type control-plane

show class-map type control-plane [ <cmap-name> ] [ __readonly__ [ { TABLE_cmap <cmap-key> <cmap-name-out> <opt_any_or_all> [ TABLE_match <match-key> [ access_grp <acc_grp_name> ] [ redirect <opt_match_redirect> ] [ exception <opt_match_excpt> ] [ protocol <opt_match_protocol> ] ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

class-map

Show class maps

type

Type of the class-map

control-plane

This is for copp policy

cmap-name

(Optional) Name of the class-map

__readonly__

(Optional)

TABLE_cmap

(Optional) all cmap xml sessions

cmap-name-out

(Optional) Name of the class-map

cmap-key

(Optional) Class-map name: xml key

opt_any_or_all

(Optional) Enter match-any or match-all

TABLE_match

(Optional) all match xml sessions

match-key

(Optional) match count: xml key

access_grp

(Optional)

acc_grp_name

(Optional)

redirect

(Optional)

opt_match_redirect

(Optional) Match criteria for redirected packets

exception

(Optional)

opt_match_excpt

(Optional) Match criteria for exception packets

protocol

(Optional)

opt_match_protocol

(Optional) Match criteria for protocol packets

Command Mode

- /exec

show class-map type network-qos

show class-map type network-qos [ <cmap-name-nq> ] [ __readonly__ { <display-all> <desc> <xcmap-name> <cos-list> <qos-group-list> <protocol> } ]

Syntax Description

Syntax Description

show

Show running system information

class-map

Show class maps

type

Type of the class-map

cmap-name-nq

(Optional) Class-map name

network-qos

type network-qos

__readonly__

(Optional)

display-all

(Optional) Display all network-qos class-maps

desc

(Optional) Description string

xcmap-name

(Optional) Class-map name

protocol

(Optional) protocol

cos-list

(Optional) List of class-of-service values

qos-group-list

(Optional) List of qos-group values

Command Mode

- /exec

show class-map type psp

show class-map type psp { [ <cmap-name-plc> [ client <clienttype> <clientID> ] [ cfg-mode <cfgmode> ] ] | [ handle <ppf_id> ] } [ __readonly__ { [ <display-all> ] [ TABLE_cmap <cmap-key> [ <id> ] [ <any_or_all> ] [ <__inline__> ] [ class-default ] <cmap-name-out> [ <desc> ] [ TABLE_match <match-key> [ <not> ] [ <any> ] [ <cos-list> ] [ <mac_src> <mac_src_wild> ] [ <mac_dest> <mac_dest_wild> ] [ <eth-value> ] [ <vlan-number> ] [ <tos-value> ] [ <ip-protocol-value> ] [ <ip-s-addr> <ip-s-mask> ] [ <ip-d-addr> <ip-d-mask> ] [ <tcp-src-port-addr> ] [ <tcp-dest-port-addr> ] [ <udp-src-port-addr> ] [ <udp-dest-port-addr> ] [ <interface-name> ] [ <ipv6-s-addr> <ipv6-s-mask> ] [ <ipv6-d-addr> <ipv6-d-mask> ] [ <dscp-list> ] ] ] } ]

Syntax Description

Syntax Description

show

Show running system information

class-map

Show class maps

type

Type of the class-map

psp

type psp

cmap-name-plc

(Optional) Class-map name

client

(Optional) set client type

clienttype

(Optional) cli/onep

clientID

(Optional) client appID

cfg-mode

(Optional) cfg-mode

cfgmode

(Optional) persistent/transient

handle

(Optional) Handle

ppf_id

(Optional) PPF ID

__readonly__

(Optional)

display-all

(Optional) Display all kinds of class-maps

TABLE_cmap

(Optional) all cmap xml sessions

cmap-key

(Optional) Class-map name: xml key

TABLE_match

(Optional) all match xml sessions

match-key

(Optional) match count: xml key

class-default

(Optional)

cmap-name-out

(Optional) Class-map name

any_or_all

(Optional) Enter match-any or match-all

__inline__

(Optional) Inline class

id

(Optional) Class-map ID

desc

(Optional) Description string

not

(Optional) Negate this match result

any

(Optional) Wildcard match

cos-list

(Optional) List of class-of-service values

mac_src

(Optional) Source MAC address

mac_src_wild

(Optional) Source MAC mask

mac_dest

(Optional) Destination MAC address

mac_dest_wild

(Optional) Destination MAC mask

eth-value

(Optional) Ethernet type

vlan-number

(Optional) Vlan number

tos-value

(Optional) IPv4 TOS

ip-protocol-value

(Optional) IPV4 protocol

ip-s-addr

(Optional) IP address in format a.b.c.d

ip-d-addr

(Optional) IP address in format a.b.c.d

ip-s-mask

(Optional) IP address Mask in format a.b.c.d

ip-d-mask

(Optional) IP address Mask in format a.b.c.d

tcp-src-port-addr

(Optional) Transport layer port number

tcp-dest-port-addr

(Optional) Transport layer port number

udp-src-port-addr

(Optional) Transport layer port number

udp-dest-port-addr

(Optional) Transport layer port number

interface-name

(Optional) Physical interface Name and Number

dscp-list

(Optional) List of DSCP values

Command Mode

- /exec

show cli alias

show cli alias [ name <s0> ]

Syntax Description

Syntax Description

show

Show running system information

cli

Show CLI information

alias

Display the alias configuration

name

(Optional) Display a specific alias

s0

(Optional) Specify the alias

Command Mode

- /exec

show cli dynamic integers

show cli dynamic integers [ <name> ] [ __readonly__ TABLE_dynamic_integers <name-o> <min> <max> ]

Syntax Description

Syntax Description

show

Show running system information

cli

CLI commands

dynamic

Display current range of dynamic parameters

integers

Display current range of dynamic integer parameters

name

(Optional) name of the dynamic parameter

__readonly__

(Optional)

TABLE_dynamic_integers

(Optional)

name-o

(Optional)

min

(Optional)

max

(Optional)

Command Mode

- /exec

show cli dynamic strings

show cli dynamic strings [ <name> ] [ __readonly__ TABLE_dynamic_strings <name-o> <value> + ]

Syntax Description

Syntax Description

show

Show running system information

cli

CLI commands

dynamic

Display current range of dynamic parameters

strings

Display current range of dynamic string parameters

name

(Optional) name of the dynamic parameter

__readonly__

(Optional)

TABLE_dynamic_strings

(Optional)

name-o

(Optional)

value

(Optional)

Command Mode

- /exec

show cli history

show cli history [ this-mode-only | exec-mode | config-mode ] [ <count> | unformatted ] +

Syntax Description

Syntax Description

show

Show running system information

cli

debug cli

history

history of cli commands

count

(Optional) number of lines to display (from end)

unformatted

(Optional) display just the commands

this-mode-only

(Optional) display history from current mode only

exec-mode

(Optional) display history of exec commands only

config-mode

(Optional) display history of config commands only

Command Mode

- /exec

show cli interface table

show cli interface table

Syntax Description

Syntax Description

show

show

cli

cli

interface

interface

table

table

Command Mode

- /exec

show cli internal ishow cli ctags

{ show cli internal | ishow cli } ctags

Syntax Description

Syntax Description

show

Show running system information

internal

Commands for internal use

ishow

Show internal information

cli

Show CLI information

ctags

Show

Command Mode

- /exec

show cli internal ishow cli dynamic-keywords

{ show cli internal | ishow cli } dynamic-keywords

Syntax Description

Syntax Description

show

Show running system information

internal

Commands for internal use

ishow

Show internal information

cli

Show CLI information

dynamic-keywords

Show

Command Mode

- /exec

show cli internal ishow cli pid

{ show cli internal | ishow cli } pid [ <epid> ]

Syntax Description

Syntax Description

show

Show running system information

internal

Commands for internal use

ishow

Show internal information

cli

Show CLI information

cli

pid

pid

epid

(Optional)

Command Mode

- /exec

show cli internal ishow cli pss

{ show cli internal | ishow cli } pss [ startup ]

Syntax Description

Syntax Description

show

Show running system information

internal

Commands for internal use

ishow

Show internal information

cli

Show CLI information

pss

Show

startup

(Optional) Show

Command Mode

- /exec

show cli internal ishow cli sdb

{ show cli internal | ishow cli } sdb

Syntax Description

Syntax Description

show

Show running system information

internal

Commands for internal use

ishow

Show internal information

cli

Show CLI information

sdb

Show

Command Mode

- /exec

show cli internal ishow cli server

{ show cli internal | ishow cli } server

Syntax Description

Syntax Description

show

Show running system information

internal

Commands for internal use

ishow

Show internal information

cli

Show CLI information

server

Show

Command Mode

- /exec

show cli internal last-command status

show cli internal last-command status

Syntax Description

Syntax Description

show

Show running system information

cli

Show CLI information

internal

Commands for internal use

last-command

Last command run on CLI

status

Status of last command run on CLI

Command Mode

- /exec

show cli internal mem-stats

show cli internal mem-stats [ no-libs ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

cli

CLI

internal

Commands for internal use

mem-stats

Show memory allocation statistics

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

Command Mode

- /exec

show cli internal sdwrap

show cli internal sdwrap

Syntax Description

Syntax Description

show

Show running system information

cli

internal

Commands for internal use

sdwrap

Show all debugging flags of clis

Command Mode

- /exec

show cli list

show cli list [ detail | recurse | <component> | <max-per-cmd> ] +

Syntax Description

Syntax Description

show

Show running system information

cli

Show CLI information

list

show

component

(Optional) component

max-per-cmd

(Optional) max

recurse

(Optional) go

detail

(Optional) formats

Command Mode

- /exec

show cli registry

show cli registry [ ctags | tags | modes | session | inherit ]

Syntax Description

Syntax Description

show

Show running system information

cli

registry

ctags

(Optional)

tags

(Optional)

modes

(Optional)

session

(Optional)

inherit

(Optional)

Command Mode

- /exec

show cli syntax

show cli syntax [ long | recurse ] + [ has-xml-out | has-no-xml-out | is-data-modeled ] [ roles [ network-admin | network-operator | <roles-mask> ] ]

Syntax Description

Syntax Description

show

Show running system information

cli

Show CLI information

syntax

show

long

(Optional) use

recurse

(Optional) also

has-xml-out

(Optional) show

has-no-xml-out

(Optional) show

is-data-modeled

(Optional) show

roles

(Optional) show

network-admin

(Optional) show

network-operator

(Optional) show

roles-mask

(Optional) show

Command Mode

- /exec

show cli variables

show cli variables

Syntax Description

Syntax Description

show

Show running system information

cli

Show CLI information

variables

Show CLI variables

Command Mode

- /exec

show clock

show clock [ detail ] [ __readonly__ { <simple_time> [ <daylight_zone> <daylight_start_week> <daylight_start_weekday> <daylight_start_month> <daylight_start_time> <daylight_end_week> <daylight_end_weekday> <daylight_end_month> <daylight_end_time> <daylight_utc_min_offset> ] } ]

Syntax Description

Syntax Description

show

Show running system information

clock

Display current Date

detail

(Optional) Display current date and summertime configuration

__readonly__

(Optional)

simple_time

(Optional) simple clock format

daylight_zone

(Optional) summer-time daylight zone

daylight_start_week

(Optional) daylight start week

daylight_start_weekday

(Optional) daylight start weekday

daylight_start_month

(Optional) daylight start month

daylight_start_time

(Optional) daylight start time

daylight_end_week

(Optional) daylight end week

daylight_end_weekday

(Optional) daylight end weekday

daylight_end_month

(Optional) daylight end month

daylight_end_time

(Optional) daylight end time

daylight_utc_min_offset

(Optional) daylight utc offset

Command Mode

- /exec

show clock utc

show clock utc

Syntax Description

Syntax Description

show

Show running system information

clock

Display current Date

utc

Display current time in UTC

Command Mode

- /exec

show config-profile

show config-profile [ name <all_conf_profile_name> ] [ __readonly__ TABLE_conf_profile_all <conf_profile_name> { <conf_profile_desc> <conf_profile_cfg> + <conf_profile_applied> + <conf_profile_include> + } ]

Syntax Description

Syntax Description

show

Show running system information

config-profile

Show config-profiles

name

(Optional) config-profile name

all_conf_profile_name

(Optional) Enter the name of configuration profile

__readonly__

(Optional)

TABLE_conf_profile_all

(Optional)

conf_profile_name

(Optional)

conf_profile_desc

(Optional)

conf_profile_cfg

(Optional)

conf_profile_applied

(Optional)

conf_profile_include

(Optional)

Command Mode

- /exec

show config-profile applied

show config-profile { applied [ auto | manually ] | non-applied } [ match-name <profile_substring> ] [ __readonly__ <profiles> ]

Syntax Description

Syntax Description

show

Show running system information

config-profile

Show config-profiles

applied

List of config-profiles that are applied

auto

(Optional) List of config-profiles that are applied via auto-config

manually

(Optional) List of all config-profiles which were applied directly from cli

non-applied

List of config-profiles that are not applied

match-name

(Optional) List of all config-profiles that have matching sub-string

__readonly__

(Optional)

profiles

(Optional)

profile_substring

(Optional) Enter a substring to match with config-profile name

Command Mode

- /exec

show configuration session

show configuration session <s3> [ __readonly__ <ssn-name> { <ssn-cmd-num> <command> } + ]

Syntax Description

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

s3

Shows configuration session given a name

__readonly__

(Optional) Read only

ssn-name

(Optional)

ssn-cmd-num

(Optional)

command

(Optional)

Command Mode

- /exec

show configuration session

show configuration session [ __readonly__ { <ssn-name> <ssn-cmd-num> <command> } + <trlr> ]

Syntax Description

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

__readonly__

(Optional) Read only

ssn-name

(Optional)

ssn-cmd-num

(Optional)

command

(Optional)

trlr

(Optional)

Command Mode

- /exec

show configuration session global-info

show configuration session global-info [ __readonly__ <max-ssns> <max-cmds> <curr-num-ssns> <curr-num-cmds> ]

Syntax Description

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

global-info

Show configuration sessions global-info

__readonly__

(Optional) Read only

max-ssns

(Optional)

max-cmds

(Optional)

curr-num-ssns

(Optional)

curr-num-cmds

(Optional)

Command Mode

- /exec

show configuration session nx-api rest

show configuration session nx-api rest

Syntax Description

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

nx-api

NX-API

rest

NX-API REST JSON format

Command Mode

- /exec

show configuration session nx-yang json

show configuration session nx-yang { json | xml }

Syntax Description

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

nx-yang

NXOS YANG

json

NXOS YANG JSON format

xml

NXOS YANG XML format

Command Mode

- /exec

show configuration session status

show configuration session status [ <s3> ] [ __readonly__ <ssn-name> { <last-action> <ac-tstamp> <ac-status> <ac-reason> } { <failed-cmd-num> + <failed-cmd> } + { <last-vfy-cmd-num> <last-vfy-cmd> <last-vfy-tstamp> } + <rollback-status> + <trlr> ]

Syntax Description

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

status

Show configuration session-mgr status

s3

(Optional) Shows configuration session status given a name

__readonly__

(Optional) Read only

ssn-name

(Optional)

last-action

(Optional)

ac-tstamp

(Optional)

ac-status

(Optional)

ac-reason

(Optional)

failed-cmd-num

(Optional)

failed-cmd

(Optional)

last-vfy-cmd-num

(Optional)

last-vfy-cmd

(Optional)

last-vfy-tstamp

(Optional)

rollback-status

(Optional)

trlr

(Optional)

Command Mode

- /exec

show configuration session summary

show configuration session summary [ __readonly__ <hdr> { <ssn-name> <username> <tstamp> } + <trlr> ]

Syntax Description

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

summary

Show summary of the active configuration sessions

__readonly__

(Optional) Read only

hdr

(Optional)

ssn-name

(Optional)

username

(Optional)

tstamp

(Optional)

trlr

(Optional)

Command Mode

- /exec

show configuration session vsh

show configuration session <s3> vsh [ __readonly__ <ssn-name> { <ssn-cmd-num> <command> } + ]

Syntax Description

Syntax Description

show

Show running system information

configuration

Show information about configuration sessions

session

Show active configuration sessions

s3

Shows configuration session given a name

vsh

__readonly__

(Optional) Read only

ssn-name

(Optional)

ssn-cmd-num

(Optional)

command

(Optional)

Command Mode

- /exec

show consistency-checker copp

show consistency-checker copp

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

copp

Verify copp programming from software context

Command Mode

- /exec

show consistency-checker fex-interfaces fex

show consistency-checker fex-interfaces fex <id>

Syntax Description

Syntax Description

show

Show running system information

fex

Limit display to interfaces on this fex

id

Enter module number

consistency-checker

Consistency Checker

fex-interfaces

Compares software and hardware state of fex interfaces

Command Mode

- /exec

show consistency-checker forwarding recover

show consistency-checker forwarding recover

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

forwarding

Display Forwarding Information

recover

Recover inconsistent routes

Command Mode

- /exec

show consistency-checker l2-tahoe module

show consistency-checker l2-tahoe module <module> [ unit <unit> ]

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

l2-tahoe

Verify l2 mac programming in the hardware

module

Module to run the consistency-checker on

module

Enter module number

unit

(Optional) Unit to run the consistency checker on

unit

(Optional) Enter unit number

Command Mode

- /exec

show consistency-checker l2-tahoe switchport interface

show consistency-checker l2-tahoe switchport interface <if_name>

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

l2-tahoe

Verify l2 switchport parameters

switchport

Switchport Interface

interface

interface

if_name

Physical or Logical interface

Command Mode

- /exec

show consistency-checker l3-interface module

show consistency-checker l3-interface module <moduleid>

Syntax Description

Syntax Description

show

Show running system information

module

Limit display to interfaces on module

moduleid

Enter module number

consistency-checker

Consistency Checker

l3-interface

Compares software and hardware properties of L3 interfaces

Command Mode

- /exec

show consistency-checker link-state module

show consistency-checker link-state module <module>

Syntax Description

Syntax Description

show

Show running system information

module

Limit display to interfaces on module

module

Enter module number

consistency-checker

Consistency Checker

link-state

Compares software and hardware link state of interfaces

Command Mode

- /exec

show consistency-checker membership port-channels

show consistency-checker membership port-channels [ interface <ch-id> ]

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

membership

Check various memberships

port-channels

Verifies port channel membership in the hardware

interface

(Optional) Port-channel number

ch-id

(Optional) Port-Channel name

Command Mode

- /exec

show consistency-checker membership vlan

show consistency-checker membership vlan <vlanid> [ private-vlan [ interface [ <int-id> | <ch-id> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

vlan

Verifies vlan membership in the hardware

vlanid

Enter vlan id

consistency-checker

Consistency Checker

membership

Check various memberships

private-vlan

(Optional) Check private-vlan primary vlan

interface

(Optional) Interface

int-id

(Optional) Interface name

ch-id

(Optional) Port-Channel name

Command Mode

- /exec

show consistency-checker nxapi interface

show consistency-checker nxapi interface

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

nxapi

Nxapi

interface

Compares interface configs between dme and pss

Command Mode

- /exec

show consistency-checker pacl module

show consistency-checker pacl module <module>

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

pacl

Verify pacl programming in the hardware

module

Limit display to L2 interfaces on this module

module

Enter module number

Command Mode

- /exec

show consistency-checker pacl port-channels

show consistency-checker pacl port-channels [ interface <ch-id> ]

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

pacl

Verify pacl programming in the hardware

port-channels

Verifies port channel pacl programming in the hardware

interface

(Optional) Port-channel number

ch-id

(Optional) Port-Channel name

Command Mode

- /exec

show consistency-checker port-security

show consistency-checker port-security [ module <mod> [ interface <intf-id> ] ]

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

port-security

Port-Security information

module

(Optional) Module

interface

(Optional) Port-security interface

intf-id

(Optional) Port-security interace

mod

(Optional) Module Number

Command Mode

- /exec

show consistency-checker qinvni

show consistency-checker qinvni

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

qinvni

QinVNI consistency checker

Command Mode

- /exec

show consistency-checker racl module

show consistency-checker racl module <module>

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

racl

Verify racl programming in the hardware

module

Limit display to L3 interfaces on this module

module

Enter module number

Command Mode

- /exec

show consistency-checker racl port-channels

show consistency-checker racl port-channels [ interface <ch-id> ]

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

racl

Verify racl programming in the hardware

port-channels

Verifies port channel racl programming in the hardware

interface

(Optional) Port-channel number

ch-id

(Optional) Port-Channel name

Command Mode

- /exec

show consistency-checker stp-state vlan

show consistency-checker stp-state vlan <vlan>

Syntax Description

Syntax Description

show

Show running system information

vlan

Verifies spanning tree state in the hardware for all interfaces in the vlan

vlan

Enter vlan id

consistency-checker

Consistency Checker

stp-state

Verify spanning tree state in the hardware

Command Mode

- /exec

show consistency-checker vacl

show consistency-checker vacl

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vacl

Verify vacl programming in the hardware

Command Mode

- /exec

show consistency-checker vxlan bgp

show consistency-checker vxlan bgp

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

bgp

Display VxLAN BGP EVPN consistency information

Command Mode

- /exec

show consistency-checker vxlan interface

show consistency-checker vxlan interface { <int-id> | <ch-id> }

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN VLANs

interface

Interface

int-id

Interface

ch-id

Port-Channel name

Command Mode

- /exec

show consistency-checker vxlan mh mac-addresses

show consistency-checker vxlan mh mac-addresses

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN VLANs

mh

VxLAN BGP EVPN Multi Homing CC commands

mac-addresses

Check mac address consistency between L2RIB and L2FM

Command Mode

- /exec

show consistency-checker vxlan mh pathlist

show consistency-checker vxlan mh pathlist

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN VLANs

mh

VxLAN BGP EVPN Multi Homing CC commands

pathlist

Check Vxlan BGP EVPN MH Control plane and resultant pathlists consistency

Command Mode

- /exec

show consistency-checker vxlan peers

show consistency-checker vxlan peers

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

peers

Display VxLAN peers consistency information

Command Mode

- /exec

show consistency-checker vxlan routes

show consistency-checker vxlan routes

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN consistency checker

routes

Display VxLAN L3 routes consistency information

Command Mode

- /exec

show consistency-checker vxlan selective-qinvni

show consistency-checker vxlan selective-qinvni

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN VLANs

selective-qinvni

Selective QinVNI consistency checker

Command Mode

- /exec

show consistency-checker vxlan selective-qinvni interface

show consistency-checker vxlan selective-qinvni interface { <int-id> | <ch-id> }

Syntax Description

Syntax Description

show

Show running system information

consistency-checker

Consistency Checker

vxlan

VxLAN VLANs

selective-qinvni

Selective QinVNI consistency checker

interface

Interface

int-id

Interface

ch-id

Port-Channel name

Command Mode

- /exec

show consistency-checker vxlan vlan

show consistency-checker vxlan vlan <vlanid>

Syntax Description

Syntax Description

show

Show running system information

vxlan

VxLAN VLANs

vlan

Verifies flood list programming for vxlan vlans

consistency-checker

Consistency Checker

vlanid

Enter vlan id

Command Mode

- /exec

show controller accounting log

show controller <ctrl-id> accounting log

Syntax Description

Syntax Description

show

Show running system information

controller

Controller command

ctrl-id

Controller id value

accounting

Accounting

log

Show log information

Command Mode

- /exec

show copp diff profile profile2

show copp diff profile <profile_type> [ prior-ver ] profile2 <profile_type2>

Syntax Description

Syntax Description

show

Show running system information

copp

Control-Plane Policing

diff

Difference between CoPP Profiles

profile

CoPP Profile

profile_type

CoPP Profile Types

prior-ver

(Optional) Previous Configured Version

profile2

CoPP Profile

profile_type2

CoPP Profile Types

Command Mode

- /exec

show copp profile

show copp profile { strict | moderate | lenient | dense } [ __readonly__ <acl-type> <acl-grp-name> { <permitdeny> { <proto_str> | <proto> | <ip> | <ipv6> } { <src_any> | <src_ip_prefix> | <src_ip_addr> <src_ip_mask> | <src_ipv6_prefix> | <src_addrgrp> | <src_mac_any> | <src_mac_addr> <src_mac_mask> } [ <src_port_op> { <src_port1_str> | <src_port1_num> } [ <src_port2_str> | <src_port2_num> ] | <src_portgrp> ] { <dest_any> | <dest_ip_prefix> | <dest_ip_addr> <dest_ip_mask> | <dest_ipv6_prefix> | <dest_addrgrp> | <dest_mac_any> | <dest_mac_addr> <dest_mac_mask> } [ <dest_port_op> { <dest_port1_str> | <dest_port1_num> } [ <dest_port2_str> | <dest_port2_num> ] | <dest_portgrp> ] [ { <icmp_type> [ <icmp_code> ] | <icmp_str> } | { <icmpv6_type> [ <icmpv6_code> ] | <icmpv6_str> } ] <eth_proto> } <newline> <cmap_name> <opt_any_or_all> { { access_grp <acc_grp_name> } | { redirect <opt_match_redirect> } | { exception <opt_match_excpt> } { protocol <opt_match_protocol> } } + <pmap_name> <class-name> <cir> <opt_kbps_mbps_gbps_pps_cir> { percent <cir-perc> } <pir> <opt_kbps_mbps_gbps_pps_pir> { percent1 <pir-perc> } <bc> <opt_kbytes_mbytes_gbytes_bc> <be> <opt_kbytes_mbytes_gbytes_be> { { <opt_drop_transmit_conform> } | { set-cos-transmit <set-cos-val> } | { set-dscp-transmit <set-dscp-val> } | { set-prec-transmit <set-prec-val> } } { { <opt_drop_transmit_exceed> } | { set dscp1 dscp2 table cir-markdown-map } } { { <opt_drop_transmit_violate> } | { set1 dscp3 dscp4 table1 pir-markdown-map } } { { cos [ inner ] <cos-val> } | { dscp [ tunnel ] <dscp-val> } | { precedence [ tunnel1 ] <prec-val> } <policer_show_flags> <set_vld_flg> } + ]

Syntax Description

Syntax Description

show

Show running system information

copp

Control-Plane Policing

profile

CoPP Profile

strict

display strict profile

moderate

display moderate profile

lenient

display lenient profile

dense

display dense profile

__readonly__

(Optional) Read Only

acl-type

(Optional) access-list type

acl-grp-name

(Optional) name of the access-list

permitdeny

(Optional) permit/deny

proto

(Optional) A protocol number

proto_str

(Optional) Protocol name

ip

(Optional) IP

ipv6

(Optional) IPV6

src_any

(Optional) SRCAny

dest_any

(Optional) DESTAny

src_ip_prefix

(Optional) Source IP prefix

src_ip_addr

(Optional) Source IP address

src_ip_mask

(Optional) Source IP mask

src_mac_addr

(Optional) Source MAC address

src_mac_mask

(Optional) Source MAC mask

src_mac_any

(Optional) SRCMACAny

dest_ip_prefix

(Optional) Destination IP prefix

dest_ip_addr

(Optional) Destination IP address

dest_ip_mask

(Optional) Destination IP mask

dest_mac_addr

(Optional) Destination MAC address

dest_mac_mask

(Optional) Destination MAC mask

dest_mac_any

(Optional) DESTMACAny

src_port_op

(Optional) Source Port operator

dest_port_op

(Optional) Destination Port operator

src_port1_str

(Optional) Source port name

src_port1_num

(Optional) Source port number

src_port2_str

(Optional) Source port name

src_port2_num

(Optional) Source port number

dest_port1_str

(Optional) Destination port name

dest_port1_num

(Optional) Destination port number

dest_port2_str

(Optional) Destination port name

dest_port2_num

(Optional) Destination port number

icmp_type

(Optional) ICMP type

icmp_code

(Optional) ICMP code

icmp_str

(Optional) ICMP message

icmpv6_type

(Optional) ICMP type

icmpv6_code

(Optional) ICMP code

icmpv6_str

(Optional) ICMP message

src_addrgrp

(Optional) Source address group

dest_addrgrp

(Optional) Destination address group

src_portgrp

(Optional) Source port group

dest_portgrp

(Optional) Destination port group

eth_proto

(Optional) MAC protocol number

newline

(Optional) newline between access-list and cmaps

cmap_name

(Optional) Name of the class-map

opt_any_or_all

(Optional) Enter match-any or match-all

access_grp

(Optional)

acc_grp_name

(Optional)

redirect

(Optional)

opt_match_redirect

(Optional) Match criteria for redirected packets

exception

(Optional)

opt_match_excpt

(Optional) Match criteria for exception packets

protocol

(Optional)

opt_match_protocol

(Optional) Match criteria for protocol packets

pmap_name

(Optional) Name of the Policy-map

class-name

(Optional) Name if the policy member

opt_kbps_mbps_gbps_pps_cir

(Optional) Units

percent

(Optional)

opt_kbps_mbps_gbps_pps_pir

(Optional) Units

percent1

(Optional)

opt_kbytes_mbytes_gbytes_bc

(Optional) Units

opt_kbytes_mbytes_gbytes_be

(Optional) Units

opt_drop_transmit_conform

(Optional) Set the action

set-cos-transmit

(Optional)

set-cos-val

(Optional) Conform action cos val

set-dscp-transmit

(Optional)

set-dscp-val

(Optional) Conform action dscp val

set-prec-transmit

(Optional)

set-prec-val

(Optional) Conform action prec val

opt_drop_transmit_exceed

(Optional) Set the action

set

(Optional)

dscp1

(Optional)

dscp2

(Optional)

table

(Optional)

cir-markdown-map

(Optional)

opt_drop_transmit_violate

(Optional) Set the action

set1

(Optional)

dscp3

(Optional)

dscp4

(Optional)

table1

(Optional)

pir-markdown-map

(Optional)

cos

(Optional)

inner

(Optional)

cos-val

(Optional) Set cos val

dscp

(Optional)

tunnel

(Optional)

dscp-val

(Optional) Set dscp val

precedence

(Optional)

tunnel1

(Optional)

prec-val

(Optional) Set prec val

policer_show_flags

(Optional) Policer show flags

set_vld_flg

(Optional) Set valid flag

Command Mode

- /exec

show copp status

show copp status [ __readonly__ { last_config_operation <last_cfg_oper> } { last_config_operation_time <last_cfg_oper_time> } { last_config_operation_status <last_cfg_oper_status> } [ last_config_operation_error_time <last_cfg_oper_error_time> ] [ last_config_operation_error <last_cfg_oper_error> ] { service_policy <srv_policy> } ]

Syntax Description

Syntax Description

show

Show running system information

copp

Control-Plane Policing

status

Show the internal status of CoPP

__readonly__

(Optional)

last_config_operation

(Optional) last config operation

last_cfg_oper

(Optional) last config operation

last_config_operation_time

(Optional) timestamp of last config operation

last_cfg_oper_time

(Optional) timestamp of last config operation

last_config_operation_status

(Optional) status of last config operation

last_cfg_oper_status

(Optional) status of last config operation

last_config_operation_error_time

(Optional) timestamp of last config operation's error

last_cfg_oper_error_time

(Optional) timestamp of last config operation's error

last_config_operation_error

(Optional) last config operation's error

last_cfg_oper_error

(Optional) last config operation's error

service_policy

(Optional) policy-map attached to control-plane

srv_policy

(Optional) policy-map attached to control-plane

Command Mode

- /exec

show copyright

show copyright [ __readonly__ { <content> } ]

Syntax Description

Syntax Description

show

Show running system information

copyright

Copyright information

__readonly__

(Optional)

content

(Optional) Copyrigh information

Command Mode

- /exec

show cores

show cores [ vdc-all | { vdc [ <e-vdc2> | <vdc-id> ] } ] [ __readonly__ { [ TABLE_cores <vdc_id> <module_id> <instance> <process_name> <pid> <sys_time> ] } ]

Syntax Description

Syntax Description

show

Show running system information

cores

show all core dumps for the current vdc

vdc-all

(Optional) show core dumps from all vdcs

vdc

(Optional) show all core dumps for the vdc

__readonly__

(Optional)

TABLE_cores

(Optional)

vdc_id

(Optional) vdc id

module_id

(Optional) module id

instance

(Optional) instance number

process_name

(Optional) name of the process

pid

(Optional) process id

sys_time

(Optional) core generate time

e-vdc2

(Optional) Enter VDC <vdc-id>

vdc-id

(Optional) vdc number

Command Mode

- /exec

show crypto ca certificates

show crypto ca certificates [ __readonly__ [ { TABLE_ca_certificates <trustpoint> [ <certificate> ] [ { TABLE_ca_cert_chains <index> <ca_certificate> } ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

crypto

show crypto configuration

ca

show trustpoint configuration

certificates

show various certificates

__readonly__

(Optional)

TABLE_ca_certificates

(Optional) Table of CA certificates

trustpoint

(Optional) Trustpoint name

certificate

(Optional) Certificate

TABLE_ca_cert_chains

(Optional) Table of CA certificates in chain

index

(Optional) CA Certificate Index

ca_certificate

(Optional) CA certificate

Command Mode

- /exec

show crypto ca certificates

show crypto ca certificates <s0> [ __readonly__ { Trustpoint <trustpoint> } [ { Certificate <certificate> } ] [ { TABLE_ca_cert_chains <index> <ca_certificate> } ] ]

Syntax Description

Syntax Description

show

Show running system information

crypto

show crypto configuration

ca

show trustpoint configuration

certificates

show various certificates

s0

trustpoint label

__readonly__

(Optional)

Trustpoint

(Optional) Trustpoint

trustpoint

(Optional) Trustpoint

Certificate

(Optional) Certificate

certificate

(Optional) Certificate

TABLE_ca_cert_chains

(Optional) Table of CA certificates in chain

index

(Optional) CA Certificate Index

ca_certificate

(Optional) CA certificate

Command Mode

- /exec

show crypto ca certstore

show crypto ca certstore [ __readonly__ { certstore_lookup <lookup_type> } ]

Syntax Description

Syntax Description

show

Show running system information

crypto

Show crypto configuration

ca

show crypto ca configuration

certstore

Show the configured certstore

__readonly__

(Optional)

certstore_lookup

(Optional) Certificate strore lookup

lookup_type

(Optional) Lookup type

Command Mode

- /exec

show crypto ca crl

show crypto ca crl <s0> [ __readonly__ { Trustpoint <trustpoint> } [ { CRL <crl> } ] ]

Syntax Description

Syntax Description

show

Show running system information

crypto

show crypto configuration

ca

show trustpoint configuration

crl

show CRL

s0

trustpoint label

__readonly__

(Optional)

Trustpoint

(Optional) Trustpoint

trustpoint

(Optional) Trustpoint

CRL

(Optional) Certificate Revocation List

crl

(Optional) Certificate Revocation List

Command Mode

- /exec

show crypto ca internal certificates

show crypto ca internal certificates

Syntax Description

Syntax Description

show

Show running system information

crypto

show crypto configuration

ca

show trustpoint configuration

internal

show internal trustpoints that were created for remote certstore

certificates

show various certificates

Command Mode

- /exec

show crypto ca remote-certstore

show crypto ca remote-certstore [ __readonly__ { remote_cert_store <rem_cert_store> } [ { crl_timer <crltimer> } { ldap_server_group <ldap_server_grp> } ] ]

Syntax Description

Syntax Description

show

Show running system information

crypto

Show crypto configuration

ca

show crypto ca configuration

remote-certstore

Show remote certstore configuration

__readonly__

(Optional)

remote_cert_store

(Optional) Remote cert store

rem_cert_store

(Optional) Remote certificate store

crl_timer

(Optional) CRL timer

crltimer

(Optional) CRL timer

ldap_server_group

(Optional) LDAP Server Group

ldap_server_grp

(Optional) LDAP Server Group

Command Mode

- /exec

show crypto ca trustpoints

show crypto ca trustpoints [ __readonly__ [ { TABLE_ca_truspoints <trustpoint> <key-pair> [ { TABLE_revocation_methods <revocation-method> } ] [ <ocsp-url> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

crypto

show crypto configuration

ca

show trustpoint configuration

trustpoints

show trustpoint configuration

__readonly__

(Optional)

trustpoint

(Optional) Trustpoint

key-pair

(Optional) Key pair

TABLE_revocation_methods

(Optional) Table of revocation methods

revocation-method

(Optional) Revocation mehtod

ocsp-url

(Optional) OCSP URL

TABLE_ca_truspoints

(Optional) Table of CA trustpoints

Command Mode

- /exec

show crypto certificatemap

show crypto certificatemap [ __readonly__ [ { TABLE_certmap <map_name> <subject_name> <alternate_email> <alternate_upn> } ] ]

Syntax Description

Syntax Description

show

Show running system information

crypto

show crypto configuration

certificatemap

show certificatemap filters

__readonly__

(Optional)

TABLE_certmap

(Optional) Table of Certificate Map

map_name

(Optional) Map name

subject_name

(Optional) Subject name

alternate_email

(Optional) Alternate Email

alternate_upn

(Optional) Alternate UPN

Command Mode

- /exec

show crypto key mypubkey rsa

show crypto key mypubkey rsa [ __readonly__ [ { TABLE_rsa_keys <key_label> <key_size> <exportable> <err_string> } ] ]

Syntax Description

Syntax Description

show

Show running system information

crypto

show crypto configuration

key

show key configuration

mypubkey

show my public keys configuration

rsa

show my rsa public keys configuration

__readonly__

(Optional)

TABLE_rsa_keys

(Optional) Table of RSA keys

key_label

(Optional) Key Lable

key_size

(Optional) Key size

exportable

(Optional) Exportable

err_string

(Optional) Error String

Command Mode

- /exec

show crypto ssh-auth-map

show crypto ssh-auth-map [ __readonly__ [ { TABLE_ssh_auth_map <issuer_name> <map1> [ <map2> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

crypto

show crypto configuration

ssh-auth-map

show mapping filters applied for ssh authentication

__readonly__

(Optional)

TABLE_ssh_auth_map

(Optional) Table of SSH Auth MAP

issuer_name

(Optional) Issuer Name

map1

(Optional) Map 1

map2

(Optional) Map 2

Command Mode

- /exec

show current

show current

Syntax Description

Syntax Description

show

Display region configurations

current

Display mst configuration currently used

Command Mode

- /exec/configure/spanning-tree/mst/configuration

Chapter 5. D Show Commands

- show diagnostic bootup level

- show diagnostic content module

- show diagnostic description module test all

- show diagnostic events

- show diagnostic ondemand setting

- show diagnostic result module

- show diagnostic result module all

- show diagnostic simulation module

- show diagnostic status module

- show diff rollback-patch

- show dot1q-tunnel

- show dot1q-tunnel interface

- show dot1x

- show dot1x all

- show dot1x all details

- show dot1x all statistics

- show dot1x all summary

- show dot1x interface

- show dot1x supplicant

- show dot1x supplicant interface

show diagnostic bootup level

show diagnostic bootup level [ __readonly__ <bootup_level> ]

Syntax Description

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

bootup

Show diagnostic bootup information

level

Show diagnostic bootup level information

__readonly__

(Optional)

bootup_level

(Optional) Bootup level

Command Mode

- /exec

show diagnostic content module

show diagnostic content module { all | <module> } [ __readonly__ <attr_descr> { TABLE_module <module_id> <module_type> { TABLE_test <test_id> <testname> <test_attr> <test_interval> } } ]

Syntax Description

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

content

Show diagnostic test content

module

Module Keyword

all

Select all module ID

module

Module number

__readonly__

(Optional)

attr_descr

(Optional) Attribute description

TABLE_module

(Optional) All modules table

module_id

(Optional) Module Number

module_type

(Optional) module type description

TABLE_test

(Optional) All tests table

test_id

(Optional) Test id

testname

(Optional) Test name

test_attr

(Optional) Test Attribute

test_interval

(Optional) HM test interval

Command Mode

- /exec

show diagnostic description module test all

show diagnostic description module <module> test { all | <name> | <test-id> } [ __readonly__ { TABLE_desc <testname> <testdesc> } ]

Syntax Description

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

description

Show diagnostic test desc

module

Module keyword

module

Module Number

test

Diagnostic test selection

all

Select all test ID

name

Test name

test-id

__readonly__

(Optional)

TABLE_desc

(Optional) Table of test description

testname

(Optional) Test name

testdesc

(Optional) Description of the test

Command Mode

- /exec

show diagnostic events

show diagnostic events [ error | info ]

Syntax Description

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

events

Diagnostic events

error

(Optional) Error event-type

info

(Optional) Information event-type

Command Mode

- /exec

show diagnostic ondemand setting

show diagnostic ondemand setting [ __readonly__ <test_iteration_count> <action_on_failure> ]

Syntax Description

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

ondemand

Show diagnostic on demand information

setting

Show diagnostic on demand settings

__readonly__

(Optional)

test_iteration_count

(Optional) Iteration Count

action_on_failure

(Optional) Action on failure

Command Mode

- /exec

show diagnostic result module

show diagnostic result module <module> [ test { <name> | <test-id> } ] { [ detail ] | [ statistics ] } [ __readonly__ <module_id> <curr_diag_level> <module_name> [ <bootup_diag_level> ] [ { TABLE_TestStat <stat_testid> <stat_testname> { TABLE_StatDetail <port_no> <packet_tx> <packet_rx> <packet_loss> } } ] [ { TABLE_Test <test_id> <testname> [ <testresult> ] [ { <passed_ports> <failed_ports> <incomplete_ports> <untested_ports> <aborted_ports> <err_disabled_ports> } ] [ { <err_code> <total_run_count> <last_execution_time> <first_failure_time> <last_failure_time> <last_pass_time> <total_fail_count> <consequtive_fail_count> <last_fail_reason> <next_execution_time> } ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

result

Show diagnostic test result

module

Module keyword

module

Module number

test

(Optional) Diagnostic test selection

test-id

(Optional)

name

(Optional) Test name

detail

(Optional) Detailed result

statistics

(Optional) Result statistics

__readonly__

(Optional)

module_id

(Optional) Module ID

curr_diag_level

(Optional) Current diag level

module_name

(Optional) Module name

bootup_diag_level

(Optional) Diagnostic level at bootup

TABLE_TestStat

(Optional) Statistics table

stat_testid

(Optional) Test id

stat_testname

(Optional) Test name

TABLE_StatDetail

(Optional) Table stats detail

port_no

(Optional) Port Number

packet_tx

(Optional) Packet Tx

packet_rx

(Optional) Packet Rx

packet_loss

(Optional) Packet lost

TABLE_Test

(Optional) Table of tests in module

test_id

(Optional) Test id of tests

testname

(Optional) Test name

testresult

(Optional) Test Results

passed_ports

(Optional) List passed ports

failed_ports

(Optional) List failed ports

incomplete_ports

(Optional) List of Imcompletly tested ports

untested_ports

(Optional) List of untested ports

aborted_ports

(Optional) List of aborted ports

err_disabled_ports

(Optional) List error disabled ports

err_code

(Optional) Error code

total_run_count

(Optional) Total run count

last_execution_time

(Optional) Last execution time

first_failure_time

(Optional) First test failure time

last_failure_time

(Optional) Last test failure time

last_pass_time

(Optional) Last test pass time

total_fail_count

(Optional) Total fail count

consequtive_fail_count

(Optional) Consequetive failure count

last_fail_reason

(Optional) Last failure reason

next_execution_time

(Optional) Next test execution time

Command Mode

- /exec

show diagnostic result module all

show diagnostic result module all [ detail ] [ __readonly__ { TABLE_Module <module_id> <curr_diag_level> <module_name> [ <bootup_diag_level> ] { TABLE_Test <test_id> <testname> [ <testresult> ] [ { <passed_ports> <failed_ports> <incomplete_ports> <untested_ports> <aborted_ports> <err_disabled_ports> } ] [ { <err_code> <total_run_count> <last_execution_time> <first_failure_time> <last_failure_time> <last_pass_time> <total_fail_count> <consequtive_fail_count> <last_fail_reason> <next_execution_time> } ] } } ]

Syntax Description

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

result

Show diagnostic test result

module

Module keyword

all

Select all test ID

detail

(Optional) Detailed result

__readonly__

(Optional)

TABLE_Module

(Optional) Table of modules

module_id

(Optional) Module ID

curr_diag_level

(Optional) Current diag level

module_name

(Optional) Module name

bootup_diag_level

(Optional) Diagnostic level at bootup

TABLE_Test

(Optional) Table of tests in module

test_id

(Optional) Test id of tests

testname

(Optional) Test name

testresult

(Optional) Test Results

passed_ports

(Optional) List passed ports

failed_ports

(Optional) List failed ports

incomplete_ports

(Optional) List of Imcompletly tested ports

untested_ports

(Optional) List of untested ports

aborted_ports

(Optional) List of aborted ports

err_disabled_ports

(Optional) List error disabled ports

err_code

(Optional) Error code

total_run_count

(Optional) Total run count

last_execution_time

(Optional) Last execution time

first_failure_time

(Optional) First test failure time

last_failure_time

(Optional) Last test failure time

last_pass_time

(Optional) Last test pass time

total_fail_count

(Optional) Total fail count

consequtive_fail_count

(Optional) Consequetive failure count

last_fail_reason

(Optional) Last failure reason

next_execution_time

(Optional) Next test execution time

Command Mode

- /exec

show diagnostic simulation module

show diagnostic simulation module <module> [ __readonly__ <module_id> <module_name> [ { TABLE_detail <serial_no> <testid> [ <portid> ] <mode> } ] ]

Syntax Description

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

simulation

Simulating Diagnostic result

module

Module keyword

module

Module Number

__readonly__

(Optional)

module_id

(Optional) Module ID

module_name

(Optional) Module Name

TABLE_detail

(Optional) Table of simulation details

serial_no

(Optional) serial no

testid

(Optional) Test id

portid

(Optional) Port id

mode

(Optional) Simulation mode

Command Mode

- /exec

show diagnostic status module

show diagnostic status module <module> [ __readonly__ <test_runby_mapping> <module_id> <module_name> { TABLE_current <cur_test_name> <cur_run_by> } { TABLE_enqued <enq_test_name> <enq_run_by> } ]

Syntax Description

Syntax Description

show

Show running system information

diagnostic

Diagnostic commands

status

Show test status(running/enqueued)

module

Module keyword

module

Module number

__readonly__

(Optional)

test_runby_mapping

(Optional) Test type expansion

module_id

(Optional) Module Id

module_name

(Optional) Module name

TABLE_current

(Optional) Table of currently running test

cur_test_name

(Optional) Currently running test

cur_run_by

(Optional) Test Run By

TABLE_enqued

(Optional) Table of enqueued tests

enq_test_name

(Optional) Enqueued test name

enq_run_by

(Optional) Test enqueued by

Command Mode

- /exec

show diff rollback-patch

show diff rollback-patch { src-checkpoint <chkpoint_name> | src-running-cfg | src-startup-cfg | src-file <srcfile_uri> } { dst-checkpoint <chkpoint_name> | dst-running-cfg | dst-startup-cfg | dst-file <dstfile_uri> } [ __readonly__ [ <patch_entry> ] + ]

Syntax Description

Syntax Description

show

Show running system information

diff

Show diff between configuration files or checkpoints

rollback-patch

Show rollback patch between configuration files or checkpoints

src-checkpoint

Use checkpoint as source configuration

chkpoint_name

Checkpoint name

src-running-cfg

Use running configuration as source

src-startup-cfg

Use startup configuration as source

src-file

Src Checkpoint file

srcfile_uri

Src Checkpoint file path

dst-checkpoint

Use checkpoint as destination configuration

chkpoint_name

Checkpoint name

dst-running-cfg

Use running configuration as destination

dst-startup-cfg

Use startup configuration as destination

dst-file

Dst Checkpoint file

dstfile_uri

Src Checkpoint file path

__readonly__

(Optional) Read only

patch_entry

(Optional) rollback patch entry

Command Mode

- /exec

show dot1q-tunnel

show dot1q-tunnel [ __readonly__ TABLE_interface <interface> ]

Syntax Description

Syntax Description

show

Show running system information

dot1q-tunnel

Show if port mode is dot1q-tunnel

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

Command Mode

- /exec

show dot1q-tunnel interface

show dot1q-tunnel interface <ifid_eth_dot1q_tunnel> [ __readonly__ TABLE_interface <interface> ]

Syntax Description

Syntax Description

show

Show running system information

dot1q-tunnel

Show if port mode is dot1q-tunnel

interface

Show interface status and information

ifid_eth_dot1q_tunnel

Enter interface type and number in module/slot format

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

Command Mode

- /exec

show dot1x

show dot1x [ __readonly__ <sys_auth_ctrl> <proto_ver> ]

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

__readonly__

(Optional)

sys_auth_ctrl

(Optional) show system auth control

proto_ver

(Optional) show protocol version

Command Mode

- /exec

show dot1x all

show dot1x all [ __readonly__ <sys_auth_ctrl> <proto_ver> TABLE_all <if_index> TABLE_allpae <pae_type> [ <port_control> ] [ <host_mode> ] [ <reauth> ] [ <quiet_period> ] [ <server_timeout> ] [ <supp_timeout> ] [ <reauth_period> ] [ <reauth_max> ] [ <max_req> ] [ <tx_period> ] [ <rate_limit_period> ] [ <mac_auth_bypass> ] [ <reauth_server> ] [ <start_period> ] [ <auth_period> ] [ <held_period> ] [ <max_start> ] ]

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

all

Show information for all interfaces

__readonly__

(Optional)

TABLE_all

(Optional)

TABLE_allpae

(Optional)

if_index

(Optional) Interface Index

sys_auth_ctrl

(Optional) Show System Auth Control

proto_ver

(Optional) Show Protocol Version

pae_type

(Optional) Show PAE Type

port_control

(Optional) Show Port Control

host_mode

(Optional) Show Host Mode

reauth

(Optional) Show Reauth Enabled Status

quiet_period

(Optional) Show Quiet Period

server_timeout

(Optional) Show Server Timeout

supp_timeout

(Optional) Show Supp Timeout

reauth_period

(Optional) Show Reauth Period

reauth_max

(Optional) Show Reauth Max

max_req

(Optional) Show Max Req

tx_period

(Optional) Show Tx Period

rate_limit_period

(Optional) Show Rate Limit Period

reauth_server

(Optional) Show Reauth Server Enabled Status

mac_auth_bypass

(Optional) Show MAC Auth Bypass Enabled Status

start_period

(Optional) Show Supplicant Start Period

auth_period

(Optional) Show Supplicant Auth Period

held_period

(Optional) Show Supplicant Held Period

max_start

(Optional) Show Supplicant Max Start

Command Mode

- /exec

show dot1x all details

show dot1x all details [ __readonly__ <sys_auth_ctrl> <proto_ver> TABLE_alldetail <if_index> TABLE_allpaedetail <pae_type> [ <port_control> ] [ <host_mode> ] [ <reauth> ] [ <quiet_period> ] [ <server_timeout> ] [ <supp_timeout> ] [ <reauth_period> ] [ <reauth_max> ] [ <max_req> ] [ <tx_period> ] [ <rate_limit_period> ] [ <mac_auth_bypass> ] [ <reauth_server> ] [ <no_of_clients> ] [ <supp_mac_addr> ] [ <auth_sm_state> ] [ <auth_bend_sm_state> ] [ <port_status> ] [ <authentication_method> ] [ <authenticated_by> ] [ <reauth_action> ] [ <time_to_next_reauth> ] [ <start_period> ] [ <auth_period> ] [ <held_period> ] [ <max_start> ] [ <no_of_supp_clients> ] [ <auth_mac_addr> ] [ <supp_sm_state> ] [ <supp_bend_sm_state> ] [ <supp_port_status> ] ]

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

all

Show information for all interfaces

details

802.1x details

__readonly__

(Optional)

TABLE_alldetail

(Optional)

TABLE_allpaedetail

(Optional)

if_index

(Optional) Interface Index

sys_auth_ctrl

(Optional) Show System Auth Control

proto_ver

(Optional) Show Protocol Version

pae_type

(Optional) Show PAE Type

port_control

(Optional) Show Port Control

host_mode

(Optional) Show Host Mode

reauth

(Optional) Show Reauth Enabled Status

quiet_period

(Optional) Show Quiet Period

server_timeout

(Optional) Show Server Timeout

supp_timeout

(Optional) Show Supp Timeout

reauth_period

(Optional) Show Reauth Period

reauth_max

(Optional) Show Reauth Max

max_req

(Optional) Show Max Req

tx_period

(Optional) Show Tx Period

rate_limit_period

(Optional) Show Rate Limit Period

reauth_server

(Optional) Show Reauth Server Enabled Status

mac_auth_bypass

(Optional) Show MAC Auth Bypass Enabled Status

no_of_clients

(Optional) Show Supplicant Clients

supp_mac_addr

(Optional) Show Supplicant MAC Address

auth_sm_state

(Optional) Show Authenticator SM State

auth_bend_sm_state

(Optional) Show Authenticator Backend State

port_status

(Optional) Show Port Status

authentication_method

(Optional) show authentication method

authenticated_by

(Optional) show authenticated by

reauth_action

(Optional) Show Reauthentication Action

time_to_next_reauth

(Optional) Show Time to Next Reauth

start_period

(Optional) Show Supplicant Start Period

auth_period

(Optional) Show Supplicant Auth Period

held_period

(Optional) Show Supplicant Held Period

max_start

(Optional) Show Supplicant Max Start

no_of_supp_clients

(Optional) Show Supplicant Clients

auth_mac_addr

(Optional) Show Authenticator MAC Address

supp_sm_state

(Optional) Show Supplicant SM State

supp_bend_sm_state

(Optional) Show Supplicant Backend SM State

supp_port_status

(Optional) Show Supplicant Port Status

Command Mode

- /exec

show dot1x all statistics

show dot1x all statistics [ __readonly__ TABLE_allstat <if_index> TABLE_allpaestat <pae_type> [ <rxstart> ] [ <rxlogoff> ] [ <rxresp> ] [ <rxrespid> ] [ <rxinvalid> ] [ <rxlenerr> ] [ <rxtotal> ] [ <txreq> ] [ <txreqid> ] [ <txtotal> ] [ <rxversion> ] [ <lastrxsourcemac> ] [ <rxreq> ] [ <rxreqid> ] [ <rxsuppinvalid> ] [ <rxsupplenerr> ] [ <rxsupptotal> ] [ <txstart> ] [ <txlogoff> ] [ <txresp> ] [ <txrespid> ] [ <txsupptotal> ] [ <rxsuppversion> ] [ <lastrxsrcmac> ] ]

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

all

Show information for all interfaces

statistics

802.1x statistics

__readonly__

(Optional)

TABLE_allstat

(Optional)

TABLE_allpaestat

(Optional)

if_index

(Optional) Interface Index

pae_type

(Optional) Show PAE Type

rxstart

(Optional) Show Received EAPOL-Start

rxlogoff

(Optional) Show Received EAPOL-Logoff

rxresp

(Optional) Show Received EAP-Response

rxrespid

(Optional) Show Received EAP-ResponseID

rxinvalid

(Optional) Show Received Invalid EAPOL Frame

rxlenerr

(Optional) Show Received EAPOL Bad Length Frame

rxtotal

(Optional) Show Received Total EAPOL Frame

txreq

(Optional) Show Transmitted EAP-Request

txreqid

(Optional) Show Transmitted EAP-RequestID

txtotal

(Optional) Show Transmitted Total EAPOL Frame

rxversion

(Optional) Show Received EAPOL Version

lastrxsourcemac

(Optional) Show Last Source MAC

rxreq

(Optional) Show Received EAP-Request

rxreqid

(Optional) Show Received EAP-RequestID

rxsuppinvalid

(Optional) Show received Invalid EAPOL Frame

rxsupplenerr

(Optional) Show received EAPOL Bad Length Frame

rxsupptotal

(Optional) Show Received Total EAPOL Frame

txstart

(Optional) Show transmitted EAPOL-Start

txlogoff

(Optional) Show transmitted EAPOL-Logoff

txresp

(Optional) Show transmitted EAP-Response

txrespid

(Optional) Show transmitted EAP-ResponseID

txsupptotal

(Optional) Show transmitted Total EAPOL Frame

rxsuppversion

(Optional) Show Received EAPOL Version

lastrxsrcmac

(Optional) Show Last Soouce MAC received

Command Mode

- /exec

show dot1x all summary

show dot1x all summary [ __readonly__ TABLE_allsummary <if_index> TABLE_allpaesummary <pae_type> [ <auth_mac_addr> ] [ <port_status> ] [ <supp_mac_addr> ] [ <supp_port_status> ] ]

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

all

Show information for all interfaces

summary

802.1x summary

__readonly__

(Optional)

TABLE_allsummary

(Optional)

TABLE_allpaesummary

(Optional)

if_index

(Optional) Interface Index

pae_type

(Optional) Show PAE Type

auth_mac_addr

(Optional) Show Authenticated MAC Address

supp_mac_addr

(Optional) Show Authenticator MAC Address

port_status

(Optional) Show Port Status

supp_port_status

(Optional) Show Supplicant Port Status

Command Mode

- /exec

show dot1x interface

{ show dot1x interface <if> [ __readonly__ <if_index> <pae_type> [ <port_control> ] [ <host_mode> ] [ <reauth> ] [ <quiet_period> ] [ <server_timeout> ] [ <supp_timeout> ] [ <reauth_period> ] [ <reauth_max> ] [ <max_req> ] [ <tx_period> ] [ <rate_limit_period> ] [ <mac_auth_bypass> ] [ <reauth_server> ] [ <start_period> ] [ <auth_period> ] [ <held_period> ] [ <max_start> ] ] } | { show dot1x interface <if> details [ __readonly__ <if_index_detail> <pae_type_detail> [ <port_control_detail> ] [ <host_mode_detail> ] [ <reauth_detail> ] [ <quiet_period_detail> ] [ <server_timeout_detail> ] [ <supp_timeout_detail> ] [ <reauth_period_detail> ] [ <reauth_max_detail> ] [ <max_req_detail> ] [ <tx_period_detail> ] [ <rate_limit_period_detail> ] [ <mac_auth_bypass_detail> ] [ <reauth_server_detail> ] [ <no_of_clients> ] [ <supp_mac_addr> ] [ <auth_sm_state> ] [ <auth_bend_sm_state> ] [ <port_status> ] [ <authentication_method> ] [ <authenticated_by> ] [ <reauth_action> ] [ <time_to_next_reauth> ] [ <start_period_detail> ] [ <auth_period_detail> ] [ <held_period_detail> ] [ <max_start_detail> ] [ <no_of_supp_clients> ] [ <auth_mac_addr> ] [ <supp_sm_state> ] [ <supp_bend_sm_state> ] [ <supp_port_status> ] ] } | { show dot1x interface <if> statistics [ __readonly__ <if_index_stat> <pae_type_stat> [ <rxstart> ] [ <rxlogoff> ] [ <rxresp> ] [ <rxrespid> ] [ <rxinvalid> ] [ <rxlenerr> ] [ <rxtotal> ] [ <txreq> ] [ <txreqid> ] [ <txtotal> ] [ <rxversion> ] [ <lastrxsourcemac> ] [ <rxreq> ] [ <rxreqid> ] [ <rxsuppinvalid> ] [ <rxsupplenerr> ] [ <rxsupptotal> ] [ <txstart> ] [ <txlogoff> ] [ <txresp> ] [ <txrespid> ] [ <txsupptotal> ] [ <rxsuppversion> ] [ <lastrxsrcmac> ] ] } | { show dot1x interface <if> summary [ __readonly__ <if_index_summary> <pae_type_summary> [ <port_status_summary> ] [ <auth_mac_addr> ] [ <supp_port_status_summary> ] [ <supp_mac_addr> ] ] }

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

if

details

802.1x details

statistics

802.1x statistics

summary

802.1x summary

__readonly__

(Optional)

if_index

(Optional) Interface Index

if_index_detail

(Optional) Interface Index

if_index_stat

(Optional) Interface Index

if_index_summary

(Optional) Interface Index

pae_type

(Optional) Show PAE Type

port_control

(Optional) Show Port Control

host_mode

(Optional) Show Host Mode

reauth

(Optional) Show Reauth Enabled Status

quiet_period

(Optional) Show Quiet Period

server_timeout

(Optional) Show Server Timeout

supp_timeout

(Optional) Show Supp Timeout

reauth_period

(Optional) Show Reauth Period

reauth_max

(Optional) Show Reauth Max

max_req

(Optional) Show Max Req

tx_period

(Optional) Show Tx Period

rate_limit_period

(Optional) Show Rate Limit Period

reauth_server

(Optional) Show Reauth Server Enabled Status

mac_auth_bypass

(Optional) Show MAC Auth Bypass Enabled Status

pae_type_detail

(Optional) Show PAE Type

port_control_detail

(Optional) Show Port Control

host_mode_detail

(Optional) Show Host Mode

reauth_detail

(Optional) Show Reauth Enabled Status

quiet_period_detail

(Optional) Show Quiet Period

server_timeout_detail

(Optional) Show Server Timeout

supp_timeout_detail

(Optional) Show Supp Timeout

reauth_period_detail

(Optional) Show Reauth Period

reauth_max_detail

(Optional) Show Reauth Max

max_req_detail

(Optional) Show Max Req

tx_period_detail

(Optional) Show Tx Period

rate_limit_period_detail

(Optional) Show Rate Limit Period

reauth_server_detail

(Optional) Show Reauth Server Enabled Status

mac_auth_bypass_detail

(Optional) Show MAC Auth Bypass Enabled Status

no_of_clients

(Optional) Show Supplicant Clients

supp_mac_addr

(Optional) Show Supplicant MAC Address

auth_sm_state

(Optional) Show Authenticator SM State

auth_bend_sm_state

(Optional) Show Authenticator Backend State

port_status

(Optional) Show Port Status

authentication_method

(Optional) show authentication method

authenticated_by

(Optional) show authenticated by

reauth_action

(Optional) Show Reauthentication Action

time_to_next_reauth

(Optional) Show Time to Next Reauth

pae_type_stat

(Optional) Show PAE Type

rxstart

(Optional) Show Received EAPOL-Start

rxlogoff

(Optional) Show Received EAPOL-Logoff

rxresp

(Optional) Show Received EAP-Response

rxrespid

(Optional) Show Received EAP-ResponseID

rxinvalid

(Optional) Show Received Invalid EAPOL Frame

rxlenerr

(Optional) Show Received EAPOL Bad Length Frame

rxtotal

(Optional) Show Received Total EAPOL Frame

txreq

(Optional) Show Transmitted EAP-Request

txreqid

(Optional) Show Transmitted EAP-RequestID

txtotal

(Optional) Show Transmitted Total EAPOL Frame

rxversion

(Optional) Show Received EAPOL Version

lastrxsourcemac

(Optional) Show Last Source MAC

pae_type_summary

(Optional) Show PAE Type

port_status_summary

(Optional) Show Port Status

supp_port_status_summary

(Optional) Show Port Status

start_period

(Optional) Show Supplicant Start Period

auth_period

(Optional) Show Supplicant Auth Period

held_period

(Optional) Show Supplicant Held Period

max_start

(Optional) Show Supplicant Max Start

start_period_detail

(Optional) Show Supplicant Start Period

auth_period_detail

(Optional) Show Supplicant Auth Period

held_period_detail

(Optional) Show Supplicant Held Period

max_start_detail

(Optional) Show Supplicant Max Start

no_of_supp_clients

(Optional) Show Supplicant Clients

auth_mac_addr

(Optional) Show Authenticator MAC Address

supp_mac_addr

(Optional) Show Supplicant Client MAC Address

supp_sm_state

(Optional) Show Supplicant SM State

supp_bend_sm_state

(Optional) Show Supplicant Backend SM State

supp_port_status

(Optional) Show Supplicant Port Status

rxreq

(Optional) Show Received EAP-Request

rxreqid

(Optional) Show Received EAP-RequestID

rxsuppinvalid

(Optional) Show received Invalid EAPOL Frame

rxsupplenerr

(Optional) Show received EAPOL Bad Length Frame

rxsupptotal

(Optional) Show Received Total EAPOL Frame

txstart

(Optional) Show transmitted EAPOL-Start

txlogoff

(Optional) Show transmitted EAPOL-Logoff

txresp

(Optional) Show transmitted EAP-Response

txrespid

(Optional) Show transmitted EAP-ResponseID

txsupptotal

(Optional) Show transmitted Total EAPOL Frame

rxsuppversion

(Optional) Show Received EAPOL Version

lastrxsrcmac

(Optional) Show Last Soouce MAC received

Command Mode

- /exec

show dot1x supplicant

show dot1x supplicant

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

supplicant

802.1x supplicant

Command Mode

- /exec

show dot1x supplicant interface

{ show dot1x supplicant interface <if> } | { show dot1x supplicant interface <if> details } | { show dot1x supplicant interface <if> summary } | { show dot1x supplicant interface <if> statistics }

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

supplicant

802.1x supplicant

if

details

802.1x details

statistics

802.1x statistics

summary

802.1x summary

Command Mode

- /exec

Chapter 6. E Show Commands

- show ecp

- show ecp internal event-history

- show ecp internal mem-stats

- show ecp internal state

- show eemtest internal eem-state

- show eigrp internal event-history

- show eigrp internal mem-stats

- show email

- show encryption service stat

- show environment

- show eol status

- show errdisable detect

- show errdisable flap

- show evb

- show evb hosts

- show evb interface

- show evb internal event-history

- show evb internal mem-stats

- show evb internal state

- show evb vsi

- show event-history

- show event-history xbar

- show event manager environment

- show event manager event-types

- show event manager events action-log

- show event manager history events

- show event manager internal clients

- show event manager internal evmc debug counters

- show event manager internal evmc errors

- show event manager internal evmc mem-stats

- show event manager internal evmc msgs

- show event manager internal evmed errors

- show event manager internal evmed msgs

- show event manager internal evms debug counters

- show event manager internal evms errors

- show event manager internal evms mem-stats

- show event manager internal evms msgs

- show event manager internal mvsh mem-stats

- show event manager internal publisher sap

- show event manager policy-state

- show event manager policy internal

- show event manager script system

- show event manager system-policy

show ecp

show ecp [ detail ] [ __readonly__ <ecp_rte> <ecp_retries> [ <ecp_mode> ] <ecp_cnt_rx_pkt> <ecp_cnt_tx_pkt> [ { TABLE_ecp_plugin <plugin_id> <plugin_desc> <plugin_status> } ] [ { TABLE_ecp_session <session_id> <session_interface> <session_svlan> [ <session_peer_mac> ] <session_rx_seq> <session_tx_seq> [ <session_cnt_rx_pkt> ] [ <session_cnt_rx_dup> ] [ <session_cnt_rx_drop> ] [ <session_cnt_tx_pkt> ] [ <session_cnt_tx_retry> ] [ <session_cnt_tx_err> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

ecp

ECP (Edge Control Protocol)

detail

(Optional) Detailed information

__readonly__

(Optional)

ecp_rte

(Optional) Retransmission timer init exponent

ecp_retries

(Optional) Maximal number of retransmissions

ecp_mode

(Optional) ECP mode

ecp_cnt_rx_pkt

(Optional) No. received packet

ecp_cnt_tx_pkt

(Optional) No. trasmitted packet

TABLE_ecp_plugin

(Optional) ECP plugin table

plugin_id

(Optional) Plugin id

plugin_desc

(Optional) Plugin description

plugin_status

(Optional) Plugin status

TABLE_ecp_session

(Optional) ECP session table

session_id

(Optional) Session id

session_svlan

(Optional) S-Vlan

session_peer_mac

(Optional) Peer mac

session_interface

(Optional) Interface

session_rx_seq

(Optional) Receive sequence

session_tx_seq

(Optional) Transmit sequence

session_cnt_rx_pkt

(Optional) No. receive packet

session_cnt_rx_dup

(Optional) No. receive duplicate

session_cnt_rx_drop

(Optional) No. receive drop

session_cnt_tx_pkt

(Optional) No. transmit packet

session_cnt_tx_retry

(Optional) No. transmit retry

session_cnt_tx_err

(Optional) No. transmit error

Command Mode

- /exec

show ecp internal event-history

show ecp internal event-history { errors | msgs | trace | events | periodic }

Syntax Description

Syntax Description

show

Show running system information

ecp

ECP (Edge Control Protocol)

internal

Internal information

event-history

Show various event logs of ECP

errors

Show error logs of ECP

msgs

Show various message logs of ECP

trace

Show processing logs of ECP commands

events

Show ECP process events

periodic

Show ECP process periodic events

Command Mode

- /exec

show ecp internal mem-stats

show ecp internal mem-stats [ all ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

ecp

ECP (Edge Control Protocol)

internal

Internal information

mem-stats

Dynamic memory stats

all

(Optional) Display private and shared memory statistics

detail

(Optional) Detailed information

Command Mode

- /exec

show ecp internal state

show ecp internal state

Syntax Description

Syntax Description

show

Show running system information

ecp

ECP (Edge Control Protocol)

internal

Internal information

state

Internal state maintained by ECP

Command Mode

- /exec

show eemtest internal eem-state

show eemtest internal eem-state

Syntax Description

Syntax Description

show

Show commands

eemtest

EEM test publisher commands

internal

EEM test publisher internal commands

eem-state

Show the EEM state in the test publisher

Command Mode

- /exec

show eigrp internal event-history

show eigrp [ <eigrp-ptag> ] internal event-history { errors | msgs | statistics | cli | notifications }

Syntax Description

Syntax Description

show

Show running system information

eigrp

Display EIGRP status and configuration

eigrp-ptag

(Optional) Process tag

internal

Commands for internal use

event-history

Event History of EIGRP

errors

Error log of EIGRP

msgs

Message log of EIGRP

statistics

State and size of the buffers

notifications

EIGRP Notifications

cli

EIGRP CLI related events

Command Mode

- /exec

show eigrp internal mem-stats

show eigrp [ <eigrp-ptag> ] internal mem-stats [ no-libs ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

eigrp

Display EIGRP status and configuration

eigrp-ptag

(Optional) Process tag

internal

Commands for internal use

mem-stats

Show memory allocation statistics

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

Command Mode

- /exec

show email

show email [ __readonly__ [ <ipv4> ] [ <ipv6> ] [ <host> ] [ <port> ] [ <reply> ] [ <from> ] [ <vrfname> ] ]

Syntax Description

Syntax Description

show

Show running system information

email

Pipe email configuration

__readonly__

(Optional)

ipv4

(Optional)

host

(Optional)

port

(Optional)

reply

(Optional)

from

(Optional)

vrfname

(Optional)

Command Mode

- /exec

show encryption service stat

show encryption service stat [ __readonly__ [ <encryptionService> <MasterKeyEncryption> <Type6Encryption> ] ]

Syntax Description

Syntax Description

show

Show running system information

encryption

Encryption service

service

Encryption service

stat

Encrytpin service status

__readonly__

(Optional)

encryptionService

(Optional) Encryption service status

MasterKeyEncryption

(Optional) Master key status

Type6Encryption

(Optional) Is type 6 encryption used?

Command Mode

- /exec

show environment

show environment [ fan [ detail1 ] | power [ detail ] [ ampere ] [ input ] | temperature [ module <module> | <s0> <santa-cruz-range> | psu ] ] [ __readonly__ { TABLE_clockinfo <clockname> <clkmodel> <clkhwver> <clkstatus> <act_standby> } { fandetails <fan_filter_status> { TABLE_faninfo <fanname> <fanmodel> <fanhwver> <fandir> <fanstatus> <failfanlet> } { TABLE_fan_zone_speed <zone> <speed> } { TABLE_fantray <fanname> <fannum> <fandir> <fanperc> <fanrpm> } { TABLE_psufan <fanname> <fan1rpm> <fan2rpm> } } { powersup <voltage_level> { TABLE_psinfo <psnum> <psmodel> <actual_out> <actual_input> <tot_capa> <ps_status> } { TABLE_mod_pow_info <modnum> <mod_model> <actual_draw> <allocated> <modstatus> } { power_summary <ps_redun_mode> <ps_oper_mode> <tot_pow_capacity> <tot_gridA_capacity> <tot_gridB_capacity> <cumulative_power> <tot_pow_out_actual_draw> <tot_pow_input_actual_draw> <tot_pow_alloc_budgeted> <available_pow> } { powersup_detail <reserve_sup> <reserve_xbar> <reserve_fan> <reserve_supxbarfan> <pow_used_by_mods> } { TABLE_psinfo_n3k <psnum> <psmodel> <input_type> <watts> <amps> <ps_status> } { TABLE_mod_pow_info_n3k <modnum> <mod_model> <watts_requested> <amps_requested> <watts_alloced> <amps_alloced> <modstatus> } { TABLE_psinputinfo_n3k <ps_slot> <ps_input_voltage> <ps_input_current> <ps_in_power> <ps_output_voltage> <ps_output_current> <ps_state> } { power_summary_n3k <ps_redun_mode> <ps_redun_op_mode> <tot_pow_capacity> <reserve_sup> <pow_used_by_mods> <available_pow> } } { TABLE_tempinfo <tempmod> <sensor> <majthres> <minthres> <curtemp> <alarmstatus> } { TABLE_psutempinfo <psumod> <inlet_temp> <outlet_temp> <heatsink_temp> } ]

Syntax Description

Syntax Description

show

Show running system information

environment

system environment information

fan

(Optional) Fan information

power

(Optional) Power capacity and power distribution information

detail

(Optional) Detail Fan-tray information when used with Fan. Detail Power capacity and power distribution information when used with Power

detail1

(Optional) Detail Fan-tray information when used with Fan

ampere

(Optional) Ampere Power capacity and power distribution information

input

(Optional) Power supply power input

temperature

(Optional) temperature sensor information

module

(Optional) enter a module number

module

(Optional) please enter the module number

s0

(Optional) xbar

santa-cruz-range

(Optional) please enter the xbar number

psu

(Optional) psu temperature

__readonly__

(Optional)

TABLE_clockinfo

(Optional) Environment Clock

clockname

(Optional) Clock Instance (A or B)

clkmodel

(Optional) Model number of clock

clkhwver

(Optional) Hardware version of the clock

clkstatus

(Optional) Present/Absent Status of the clock

act_standby

(Optional) Active/Standby Status of clock

fandetails

(Optional) Environment Fan

fan_filter_status

(Optional) Present/Absent Status of fan filter

TABLE_faninfo

(Optional) Fan Info

fanname

(Optional) Fan Instance

fanmodel

(Optional) Model number of fan

fanhwver

(Optional) Hardware version of the fan

fandir

(Optional) Air-flow direction of the fan-tray

fanstatus

(Optional) Present/Absent Status of the fan

TABLE_fan_zone_speed

(Optional) Fan Zone Speeds

zone

(Optional) Zone Number

speed

(Optional) Zone Speed

failfanlet

(Optional) failed fanlet number

TABLE_fantray

(Optional) Fan Tray Details table

fanname

(Optional) Fan Tray Instance

fannum

(Optional) Fan number in the tray

fandir

(Optional) Air-flow direction of the fan-tray

fanperc

(Optional) FAN Speed percentage

fanrpm

(Optional) FAN Speed RPM

TABLE_psufan

(Optional) PSU Fan Details table

fanname

(Optional) PSU Fan Instance

fan1rpm

(Optional) FAN1 Speed RPM

fan2rpm

(Optional) FAN2 Speed RPM

powersup

(Optional) Environment Power

voltage_level

(Optional) Voltage Level

TABLE_psinfo

(Optional) Power Supply Info

psnum

(Optional) Power Supply Number

psmodel

(Optional) Power Supply Model

actual_out

(Optional) Actual Output

actual_input

(Optional) Actual Input

tot_capa

(Optional) Total Capacity

ps_status

(Optional) Power Supply Status

TABLE_mod_pow_info

(Optional) Module Power Info

modnum

(Optional) Module number

mod_model

(Optional) Model ProductID number

actual_draw

(Optional) Actual Draw

allocated

(Optional) Power allocated

modstatus

(Optional) Module Status

power_summary

(Optional) Power Usage Summary

ps_redun_mode

(Optional) Mode: Redundant or Non-redundant

ps_oper_mode

(Optional) Operational Mode

tot_pow_capacity

(Optional) Total Power Capacity

tot_gridA_capacity

(Optional) Total Grid-A Capacity

tot_gridB_capacity

(Optional) Total Grid-B Capacity

cumulative_power

(Optional) Total Power of all Inputs

tot_pow_out_actual_draw

(Optional) Total Power Output, Actuals

tot_pow_input_actual_draw

(Optional) Total Power Input, Actuals

tot_pow_alloc_budgeted

(Optional) Total Power Allocated/budgeted

available_pow

(Optional) Remaining Power Available

powersup_detail

(Optional) PowerSupply Details

reserve_sup

(Optional) Power reserved for Supervisors

reserve_xbar

(Optional) Power reserved for Xbars

reserve_fan

(Optional) Power reserved for Fans

reserve_supxbarfan

(Optional) Total Power reserved for Sups,Xbars,Fans

pow_used_by_mods

(Optional) Power currently used by Modules

TABLE_tempinfo

(Optional) Environment Temperature

tempmod

(Optional) Module

sensor

(Optional) Sensor name

majthres

(Optional) Major Threshold

minthres

(Optional) Minor Threshold

curtemp

(Optional) Current temperature

alarmstatus

(Optional) Alarm Status

TABLE_psutempinfo

(Optional) PSU temperature info table

psumod

(Optional) PSU Module

inlet_temp

(Optional) Inlet Temperature

outlet_temp

(Optional) Outlet Temperature

heatsink_temp

(Optional) Heatsink Temperature

TABLE_psinfo_n3k

(Optional) Power Supply Info

psnum

(Optional) Power Supply Number

psmodel

(Optional) Power Supply Model

input_type

(Optional) Power Supply Input Type

watts

(Optional) Power in Watts

amps

(Optional) Power in Amps

ps_status

(Optional) Power Supply Status

TABLE_mod_pow_info_n3k

(Optional) Module Power Info

modnum

(Optional) Module number

mod_model

(Optional) Model ProductID number

watts_requested

(Optional) Power requested in Watts

amps_requested

(Optional) Power requested in Amps

watts_alloced

(Optional) Power allocated in Watts

amps_alloced

(Optional) Power allocated in Amps

modstatus

(Optional) Module Status

TABLE_psinputinfo_n3k

(Optional) Power Supply power input

ps_slot

(Optional) Power Supply Number

ps_input_voltage

(Optional) Power Supply input volatage

ps_input_current

(Optional) Power Supply input current

ps_in_power

(Optional) Power Supply input power

ps_output_voltage

(Optional) Power Supply output volatage

ps_output_current

(Optional) Power Supply output current

ps_state

(Optional) Power Supply status

power_summary_n3k

(Optional) Power Usage Summary

ps_redun_mode

(Optional) Mode: Redundant or Non-redundant

ps_redun_op_mode

(Optional) Operational mode: Redundant or Non-redundant

tot_pow_capacity

(Optional) Total Power Capacity

reserve_sup

(Optional) Power reserved for Supervisors

pow_used_by_mods

(Optional) Power currently used by Modules

available_pow

(Optional) Total Power Available

Command Mode

- /exec

show eol status

show eol status

Syntax Description

Syntax Description

show

Show running system information

eol

last

status

Command Mode

- /exec

show errdisable detect

show errdisable { detect | recovery } [ __readonly__ TABLE_errdisable <cause> <state> [ <time_interval> ] ]

Syntax Description

Syntax Description

show

Show running system information

errdisable

Error disable

detect

Show errdisable detect

recovery

Show errdisable recovery

__readonly__

(Optional) Read Only

TABLE_errdisable

(Optional) show errdisable

cause

(Optional) errdisable cause

state

(Optional) Interface state

time_interval

(Optional) err revovery time interval

Command Mode

- /exec

show errdisable flap

show errdisable flap

Syntax Description

Syntax Description

show

Show running system information

errdisable

Error disable

flap

linkstate flapping

Command Mode

- /exec

show evb

show evb [ __readonly__ <evb_role> <evb_vdp_mac> [ <evb_cisco_mac> ] [ <evb_user_mac> ] <evb_rwd> <evb_rka> <evb_cnt_recv_vdpdu> <evb_cnt_drop_vdpdu> <evb_cnt_recv_tlv> <evb_cnt_recv_mgr_tlv> <evb_cnt_recv_assoc_tlv> <evb_cnt_recv_cmd> ]

Syntax Description

Syntax Description

show

Show running system information

evb

EVB (Edge Virtual Bridge)

__readonly__

(Optional)

evb_role

(Optional) EVB role

evb_vdp_mac

(Optional) VDP Mac address

evb_cisco_mac

(Optional) Cisco Mac address

evb_user_mac

(Optional) User mac address

evb_rwd

(Optional) Resource wait init exponent

evb_rka

(Optional) Keep-alive init exponent

evb_cnt_recv_vdpdu

(Optional) No. received vdpdu

evb_cnt_drop_vdpdu

(Optional) No. dropped vdpdu

evb_cnt_recv_tlv

(Optional) No. received tlv

evb_cnt_recv_mgr_tlv

(Optional) No. received mgr tlv

evb_cnt_recv_assoc_tlv

(Optional) No. received assoc tlv

evb_cnt_recv_cmd

(Optional) No. received commands

Command Mode

- /exec

show evb hosts

show evb hosts [ { summary | detail | internal-info } ] [ { [ mac <mac-addr> | interface <intf-name> | vlan <vlan-id> | vni <vni-id> | ip <ip-addr> | ipv6 <ipv6-addr> | name <host-name> ] + } ] [ __readonly__ <evb_cnt_host> <evb_cnt_assoc_vsi> [ { TABLE_evb_host <host_row_id> <host_name> [ <host_uuid> ] [ { TABLE_evb_vsi <vsi_row_id> <mgr_id> <vsi_id> [ <vsi_host_name> ] <interface> [ <vpc> ] [ <s_channel> ] [ <station_mac> ] [ <m_state> ] [ <e_state> ] [ <reason> ] [ <timer> ] [ <profile_id> ] [ { TABLE_evb_vsi_filter <filter_row_id> [ <filter_group> ] [ <filter_vid> ] [ <filter_bd> ] [ <filter_mac> ] [ <filter_ip> ] } ] } ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

evb

EVB (Edge Virtual Bridge)

hosts

Host information

summary

(Optional) Display summary information

detail

(Optional) Display detailed information

internal-info

(Optional) Display detailed and internal information

mac

(Optional) Display hosts by MAC address

mac-addr

(Optional) MAC Address

interface

(Optional) Display hosts by interface

intf-name

(Optional) Interface name

vlan

(Optional) Display hosts by VLAN

vlan-id

(Optional) VLAN ID

vni

(Optional) Display hosts by Virtual Network Identifier

vni-id

(Optional) VNI

ip

(Optional) Display hosts by IP address

ipv6

(Optional) Display hosts by IPv6 address

ip-addr

(Optional) IP address

name

(Optional) Display hosts by host name

host-name

(Optional) Host name substring

__readonly__

(Optional)

evb_cnt_host

(Optional) No. host entries

evb_cnt_assoc_vsi

(Optional) No. associated VSI entires

TABLE_evb_host

(Optional) EVB host table

host_row_id

(Optional) Host row id

host_name

(Optional) Host name

host_uuid

(Optional) Host uuid

TABLE_evb_vsi

(Optional) EVB vsi table

vsi_row_id

(Optional) VSI row id

mgr_id

(Optional) Manager id

vsi_id

(Optional) VSI id

vsi_host_name

(Optional) Host name

interface

(Optional) Interface

vpc

(Optional) VPC

s_channel

(Optional) S-Channel

station_mac

(Optional) Station mac address

profile_id

(Optional) Profile id

m_state

(Optional) Machine state

e_state

(Optional) Entry state

reason

(Optional) State reaon

timer

(Optional) Countdown timer

TABLE_evb_vsi_filter

(Optional) EVB filter table

filter_row_id

(Optional) Filter row id

filter_group

(Optional) Group id

filter_vid

(Optional) Vlan id

filter_bd

(Optional) Bridge-domain id

filter_mac

(Optional) Mac address

filter_ip

(Optional) IP address

Command Mode

- /exec

show evb interface

show evb interface [ <intf-name> ]

Syntax Description

Syntax Description

show

Show running system information

evb

EVB (Edge Virtual Bridge)

interface

Display interface information

intf-name

(Optional) Interface name

Command Mode

- /exec

show evb internal event-history

show evb internal event-history { <evt-hist-subsystem> | msgs }

Syntax Description

Syntax Description

show

Show running system information

evb

EVB (Edge Virtual Bridge)

internal

Show EVB internal information

event-history

Show EVB event history buffers

msgs

EVB various message logs

evt-hist-subsystem

EVB event history buffers

Command Mode

- /exec

show evb internal mem-stats

show evb internal mem-stats [ all ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

evb

EVB (Edge Virtual Bridge)

internal

Internal information

mem-stats

Dynamic memory stats

all

(Optional) Display private and shared memory statistics

detail

(Optional) Detailed information

Command Mode

- /exec

show evb internal state

show evb internal state

Syntax Description

Syntax Description

show

Show running system information

evb

EVB (Edge Virtual Bridge)

internal

Internal information

state

Internal state maintained by EVB

Command Mode

- /exec

show evb vsi

show evb vsi [ { summary | detail | internal-info } ] [ { [ mac <mac-addr> | interface <intf-name> | vlan <vlan-id> | vni <vni-id> | ip <ip-addr> | ipv6 <ipv6-addr> ] + } ] [ __readonly__ <evb_cnt_vsi> <evb_cnt_assoc_vsi> [ { TABLE_evb_vsi <vsi_row_id> <mgr_id> <vsi_id> [ <vsi_host_name> ] <interface> [ <vpc> ] [ <s_channel> ] [ <station_mac> ] [ <m_state> ] [ <e_state> ] [ <reason> ] [ <timer> ] [ <profile_id> ] [ { TABLE_evb_vsi_filter <filter_row_id> [ <filter_group> ] [ <filter_vid> ] [ <filter_bd> ] [ <filter_mac> ] [ <filter_ip> ] } ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

evb

EVB (Edge Virtual Bridge)

vsi

Virtual Station Interface (VSI) information

summary

(Optional) Display summary information

detail

(Optional) Display detailed information

internal-info

(Optional) Display detailed and internal information

mac

(Optional) Display VSI by MAC address

mac-addr

(Optional) MAC Address

interface

(Optional) Display VSI by interface

intf-name

(Optional) Interface name

vlan

(Optional) Display VSI by VLAN

vlan-id

(Optional) VLAN ID

vni

(Optional) Display VSI by Virtual Network Identifier

vni-id

(Optional) VNI

ip

(Optional) Display VSI by IP address

ipv6

(Optional) Display VSI by IPv6 address

ip-addr

(Optional) IP address

__readonly__

(Optional)

evb_cnt_vsi

(Optional) No. VSI entries

evb_cnt_assoc_vsi

(Optional) No. associated VSI entires

TABLE_evb_vsi

(Optional) EVB vsi table

vsi_row_id

(Optional) VSI row id

mgr_id

(Optional) Manager id

vsi_id

(Optional) VSI id

vsi_host_name

(Optional) Host name

interface

(Optional) Interface

vpc

(Optional) VPC

s_channel

(Optional) S-Channel

station_mac

(Optional) Station mac address

profile_id

(Optional) Profile id

m_state

(Optional) Machine state

e_state

(Optional) Entry state

reason

(Optional) State reaon

timer

(Optional) Countdown timer

TABLE_evb_vsi_filter

(Optional) EVB filter table

filter_row_id

(Optional) Filter row id

filter_group

(Optional) Group id

filter_vid

(Optional) Vlan id

filter_bd

(Optional) Bridge-domain id

filter_mac

(Optional) Mac address

filter_ip

(Optional) IP address

Command Mode

- /exec

show event-history

show event-history

Syntax Description

Syntax Description

show

Show running system information

event-history

show switch wide event history configuration

Command Mode

- /exec

show event-history xbar

show event-history xbar

Syntax Description

Syntax Description

show

Show running system information

event-history

show switch wide event history configuration

xbar

Show all event-history debugging flags of xbar

Command Mode

- /exec

show event manager environment

show event manager environment { all | <varname> } [ __readonly__ <environment-details> ]

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

environment

Show information about environment variables

all

Show information about all the configured environment variables

varname

The environment variable name on which information is required

__readonly__

(Optional)

environment-details

(Optional)

Command Mode

- /exec

show event manager event-types

show event manager event-types [ all | <event-type-name> ] [ module <module-id> ] [ __readonly__ { <event-types> } ]

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

event-types

Show information about registered event types

all

(Optional) Show information about advanced event types as well

event-type-name

(Optional) Show information about the specified event type

module

(Optional) Show information about event types on other modules

module-id

(Optional)

__readonly__

(Optional)

event-types

(Optional)

Command Mode

- /exec

show event manager events action-log

show event manager events action-log [ policy <policy-name> | event-type <event-type-name> ]

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

events

Show information about the history of past events

action-log

Show policy action logs

policy

(Optional) Name of policy

policy-name

(Optional) Enter policy name

event-type

(Optional) Name of event

event-type-name

(Optional) Enter event type

Command Mode

- /exec

show event manager history events

show event manager history events [ detail ] [ maximum <n-events> ] [ severity <sev> ] [ __readonly__ { <history-events> } ]

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

history

Show information about the history of past activity

events

Show information about the history of past events

detail

(Optional) Show information about the event parameters as well

maximum

(Optional) Specify an upper limit on the number of events to be shown

n-events

(Optional) Specify the maximum number of events to be shown

severity

(Optional) Show only those events whose severity is >= specified severity

sev

(Optional) Enter the severity threshold

__readonly__

(Optional)

history-events

(Optional)

Command Mode

- /exec

show event manager internal clients

show event manager internal clients [ all ] [ module <module-id> ]

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

internal

Internal event manager commands

clients

Show information about clients registered with EEM system

all

(Optional) Show information about advanced clients as well

module

(Optional) Show information about services on other modules

module-id

(Optional)

Command Mode

- /exec

show event manager internal evmc debug counters

show event manager internal evmc debug counters

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

internal

Commands for internal use

evmc

Event Manager Client commands

debug

Show debug information

counters

Show information about the debug counters

Command Mode

- /exec

show event manager internal evmc errors

show event manager internal evmc errors

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

internal

Commands for internal use

evmc

Event Manager Client commands

errors

Show error logs

Command Mode

- /exec

show event manager internal evmc mem-stats

show event manager internal evmc mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

internal

Commands for internal use

evmc

Event Manager Client commands

mem-stats

Show information about memory allocation statistics

detail

(Optional) Show detailed information about memory allocation statistics

Command Mode

- /exec

show event manager internal evmc msgs

show event manager internal evmc msgs

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

internal

Commands for internal use

evmc

Event Manager Client commands

msgs

Show message logs

Command Mode

- /exec

show event manager internal evmed errors

show event manager internal evmed errors

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

internal

Internal event manager commands

evmed

Generic event publisher

errors

Show error logs

Command Mode

- /exec

show event manager internal evmed msgs

show event manager internal evmed msgs

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

internal

Internal event manager event publisher commands

evmed

Generic event publiser

msgs

Show message logs

Command Mode

- /exec

show event manager internal evms debug counters

show event manager internal evms debug counters

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

internal

Internal event manager commands

evms

Event Manager Server commands

debug

Show debug information

counters

Show information about the debug counters

Command Mode

- /exec

show event manager internal evms errors

show event manager internal evms errors

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

internal

Internal event manager commands

evms

Event Manager Server commands

errors

Show error logs

Command Mode

- /exec

show event manager internal evms mem-stats

show event manager internal evms mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

internal

Internal event manager commands

evms

Event Manager Server commands

mem-stats

Show information about memory allocation statistics

detail

(Optional) Show detailed information about memory allocation statistics

Command Mode

- /exec

show event manager internal evms msgs

show event manager internal evms msgs

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

internal

Internal event manager commands

evms

Event Manager Server commands

msgs

Show message logs

Command Mode

- /exec

show event manager internal mvsh mem-stats

show event manager internal mvsh mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

internal

Commands for internal use

mvsh

MVSH commands

mem-stats

Show information about memory allocation statistics

detail

(Optional) Show detailed information about memory allocation statistics

Command Mode

- /exec

show event manager internal publisher sap

show event manager internal publisher sap <sapnum> [ module <module-id> ]

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

internal

Internal event manager commands

publisher

Show information about the EEM state in a publisher

sap

Enter the SAP of the publisher

sapnum

The SAP of the publisher

module

(Optional) Show information about a publisher on other module

module-id

(Optional)

Command Mode

- /exec

show event manager policy-state

show event manager policy-state <name> [ module <module-id> ] [ __readonly__ { <policy-state> } ]

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

policy-state

Show information about the state of a policy

name

Name of the policy

module

(Optional) Get the information from a module

module-id

(Optional)

__readonly__

(Optional)

policy-state

(Optional)

Command Mode

- /exec

show event manager policy internal

show event manager policy internal [ <policy-name> | inactive ]

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

policy

Show information about applets or script policies

internal

Show detailed information about the configured/registered policies

inactive

(Optional) List the policies that are not active in the system

policy-name

(Optional) Show detailed information about the specified policy

Command Mode

- /exec

show event manager script system

show event manager script system { all | <script-name> } [ __readonly__ <script_system_details> ]

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

script

Show information about a script policy

system

Show information about a system script policy

all

Show all the available system script policies

script-name

Name of the system script policy

__readonly__

(Optional)

script_system_details

(Optional)

Command Mode

- /exec

show event manager system-policy

show event manager system-policy [ all | <policy-name> ] [ __readonly__ { <sys-pol-details> } ]

Syntax Description

Syntax Description

show

Show running system information

event

Event Manager commands

manager

Event Manager commands

system-policy

Show information about default system policies

all

(Optional) Show all policies (including advanced and non-overridable ones)

policy-name

(Optional) Show detailed information about the specified policy

__readonly__

(Optional)

sys-pol-details

(Optional)

Command Mode

- /exec

Chapter 7. F Show Commands

- show fabric database dci

- show fabric database dci

- show fabric database host

- show fabric database host

- show fabric database host internal

- show fabric database host statistics

- show fabric database host statistics

- show fabric database host summary

- show fabric database host summary

- show fabric database internal profile-data

- show fabric database profile-map

- show fabric database profile-map

- show fabric database statistics

- show fabric forwarding host-db

- show fabric forwarding internal af

- show fabric forwarding internal buffers

- show fabric forwarding internal clients

- show fabric forwarding internal debug

- show fabric forwarding internal event-history

- show fabric forwarding internal intf local

- show fabric forwarding internal ip dup-host

- show fabric forwarding internal ip local-host-db

- show fabric forwarding internal ipv6 local-host-db

- show fabric forwarding internal mac-bd local-host-db

- show fabric forwarding internal mem-stats

- show fabric forwarding internal migration-vips

- show fabric forwarding internal sdb

- show fabric forwarding internal state

- show fabric forwarding internal state vPC

- show fabric forwarding internal svi-info

- show fabric forwarding internal topo-info

- show fabric forwarding internal work-info

- show fabric forwarding ip

- show fabric forwarding ipv6

- show fabric forwarding statistics conversational-learning

- show fc2 bind

- show fc2 classf

- show fc2 exchange

- show fc2 exchresp

- show fc2 flogi

- show fc2 internal cmdcode

- show fc2 internal cpuhog

- show fc2 internal cpuperiod

- show fc2 internal cputimer

- show fc2 internal debugmon

- show fc2 internal dest_index

- show fc2 internal device

- show fc2 internal event-history errors

- show fc2 internal event-history filt_msg

- show fc2 internal event-history log_errors

- show fc2 internal event-history msgs

- show fc2 internal fc2_tx_enable

- show fc2 internal flag

- show fc2 internal fragsize

- show fc2 internal maxrxbuffer

- show fc2 internal memory_usage

- show fc2 internal pid_tx

- show fc2 internal platform

- show fc2 internal plogi

- show fc2 internal reason_code

- show fc2 internal rxmaxpacket

- show fc2 internal rxmaxsequence

- show fc2 internal sockqueue

- show fc2 internal tstmpvalid

- show fc2 internal txmaxsequence

- show fc2 nport

- show fc2 plogi

- show fc2 plogi_pwwn

- show fc2 port brief

- show fc2 port drops

- show fc2 port state

- show fc2 socket

- show fc2 sockexch

- show fc2 socknotify

- show fc2 socknport

- show fc2 vsan

- show fcoe_klm internal event-history errors

- show fcoe_klm internal event-history msgs

- show fcoe_klm internal flag

- show fcoe_klm internal platform

- show feature-set

- show feature-set services

- show feature

- show fhrp

- show fhrp verbose

- show file

- show fips status

- show flow cache

- show flow exporter

- show flow glbl-pkt-cnt

- show flow interface

- show flow internal

- show flow internal counter error

- show flow internal counter info

- show flow internal counter mts

- show flow internal ddb db

- show flow internal event-history

- show flow internal event-history ddb

- show flow internal event-history errors

- show flow internal event-history events

- show flow internal event-history export

- show flow internal event-history lif

- show flow internal event-history msgs

- show flow internal event-history swcache

- show flow internal lif status

- show flow internal mem-stats

- show flow monitor

- show flow record

- show flow sw-monitor

- show flow timeout

- show forwarding adjacency

- show forwarding bypass-hardware

- show forwarding capture

- show forwarding dvif primary

- show forwarding dvif secondary

- show forwarding ecmp

- show forwarding ecmp recursive

- show forwarding file-log disable

- show forwarding file-log enable

- show forwarding interfaces

- show forwarding internal debugs

- show forwarding internal error counts

- show forwarding internal errors

- show forwarding internal info

- show forwarding internal ipfib debugs

- show forwarding internal l2mcast debugs

- show forwarding internal l2vpn counters

- show forwarding internal l2vpn trace member-config

- show forwarding internal l2vpn trace member-history

- show forwarding internal l3 issu pss adjacency

- show forwarding internal l3 issu pss ecmp

- show forwarding internal l3 issu pss prefix

- show forwarding internal l3 issu pss vobj

- show forwarding internal mem-stats

- show forwarding internal message counts

- show forwarding internal mpls counters

- show forwarding internal mpls debugs

- show forwarding internal mpls issu pss adjacency

- show forwarding internal mpls issu pss ecmp

- show forwarding internal mpls issu pss label

- show forwarding internal mpls trace adj-config

- show forwarding internal mpls trace adj-history

- show forwarding internal mpls trace ecmp-config

- show forwarding internal mpls trace ecmp-history

- show forwarding internal mpls trace label-config

- show forwarding internal mpls trace label-history

- show forwarding internal mpls trace te-config

- show forwarding internal mpls trace te-history

- show forwarding internal msgs

- show forwarding internal multicast counts

- show forwarding internal multicast counts clear

- show forwarding internal multicast debugs

- show forwarding internal multicast pd debugs

- show forwarding internal nve counters

- show forwarding internal nve ir-peer

- show forwarding internal nve res-pathlist

- show forwarding internal pss disable

- show forwarding internal pss enable

- show forwarding internal received nexthops

- show forwarding internal trace-profile debugs

- show forwarding internal trace bt-queue

- show forwarding internal trace ecmp-config

- show forwarding internal trace ecmp-history

- show forwarding internal trace evpn-ecmp-history

- show forwarding internal trace mfib oif-config

- show forwarding internal trace mfib oif-history

- show forwarding internal trace mfib oiflist-config

- show forwarding internal trace mfib oiflist-history

- show forwarding internal trace mfib otv oif-config

- show forwarding internal trace mfib otv oif-history

- show forwarding internal trace mfib otv oiflist-history

- show forwarding internal trace mfib otv oiflist-config

- show forwarding internal trace mfib otv v4-route-history

- show forwarding internal trace mfib otv v4-route-config

- show forwarding internal trace mfib otv v6-route-history

- show forwarding internal trace mfib otv v6-route-config

- show forwarding internal trace mfib platform oiflist-history

- show forwarding internal trace mfib platform oiflist-config

- show forwarding internal trace mfib v4-route-config

- show forwarding internal trace mfib v4-route-history

- show forwarding internal trace mfib v6-route-config

- show forwarding internal trace mfib v6-route-history

- show forwarding internal trace nve-ir-peer-history

- show forwarding internal trace nve-l3-vni-history

- show forwarding internal trace nve-peer-history

- show forwarding internal trace otv-adj-config

- show forwarding internal trace otv-adj-history

- show forwarding internal trace otv-vlan-config

- show forwarding internal trace otv-vlan-history

- show forwarding internal trace v4-adj-config

- show forwarding internal trace v4-adj-history

- show forwarding internal trace v4-pfx-config

- show forwarding internal trace v4-pfx-history

- show forwarding internal trace v4-rnh-config

- show forwarding internal trace v4-rnh-history

- show forwarding internal trace v6-adj-config

- show forwarding internal trace v6-adj-history

- show forwarding internal trace v6-pfx-config

- show forwarding internal trace v6-pfx-history

- show forwarding internal trace v6-rnh-config

- show forwarding internal trace v6-rnh-history

- show forwarding internal trace vobj-config

- show forwarding internal trace vobj-history

- show forwarding internal tracing disable

- show forwarding internal tracing enable

- show forwarding internal ufib funcstats disable

- show forwarding internal ufib funcstats enable

- show forwarding internal unicast consistency-checker

- show forwarding internal unicast counts

- show forwarding internal unicast debugs

- show forwarding internal unicast ha

- show forwarding ipv6 adjacency

- show forwarding ipv6 multicast route

- show forwarding ipv6 pss route

- show forwarding ipv6 route

- show forwarding kvfib cache on

- show forwarding l2 multicast

- show forwarding l2vpn ipv6 multicast route

- show forwarding l2vpn label vpls

- show forwarding l2vpn label xconnect

- show forwarding l2vpn multicast outgoing-interface-list

- show forwarding l2vpn multicast route

- show forwarding l2vpn service vpls

- show forwarding l2vpn service xconnect

- show forwarding l2vpn vlan

- show forwarding mpls

- show forwarding mpls aggregate

- show forwarding mpls cbts

- show forwarding mpls drop-stats

- show forwarding mpls ecmp

- show forwarding mpls summary

- show forwarding mpls te

- show forwarding multicast outgoing-interface-list L2

- show forwarding multicast route

- show forwarding nve l2 ingress-replication-peers

- show forwarding nve l3 adjacency tunnel

- show forwarding nve l3 ecmp

- show forwarding nve l3 peers

- show forwarding otv

- show forwarding otv ipv6 multicast route

- show forwarding otv multicast outgoing-interface-list

- show forwarding otv multicast route

- show forwarding otv vlan

- show forwarding pss route

- show forwarding restart

- show forwarding route

- show forwarding security group-tag

- show forwarding security mac

- show forwarding test on

- show forwarding trace

- show forwarding trace profile

- show forwarding trace profile funcstats

show fabric database dci

show fabric database dci [ { vrf <vrf-name> [ peer-id <peer-ip-address> ] [ detail ] } ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

dci

DCI Profile Database

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

peer-id

(Optional) management ip address of peer

peer-ip-address

(Optional) IP address in CIDR format

detail

(Optional) Show detailed information

Command Mode

- /exec

show fabric database dci

show fabric database dci [ { vrf { <vrf-name> | <vrf-known-name> } [ peer-id <peer-ip-address> ] [ detail ] } ] [ __readonly__ [ TABLE_database_dci <vrf_name> <state> <flags> <profile> <instance> ] [ TABLE_database_dci_detail <request_time> <request_profile> <got_profile> <sent_to_ppm> <profile_apply> <del_to_ppm> ] ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

dci

DCI Profile Database

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

peer-id

(Optional) management ip address of peer

peer-ip-address

(Optional) IP address in CIDR format

detail

(Optional) Show detailed information

__readonly__

(Optional) Read Only

TABLE_database_dci

(Optional) table show fabric database dci

vrf_name

(Optional)

state

(Optional)

flags

(Optional)

profile

(Optional)

instance

(Optional)

TABLE_database_dci_detail

(Optional) detail for table show fabric database dci

request_time

(Optional)

request_profile

(Optional)

got_profile

(Optional)

sent_to_ppm

(Optional)

profile_apply

(Optional)

del_to_ppm

(Optional)

Command Mode

- /exec

show fabric database host

show fabric database host [ detail ] [ { vni <vni-id> } | { dot1q <vlan-id> } ] [ __readonly__ [ TABLE_database_host [ <trigger_source> ] [ <client_type> ] [ <got_trigger_at> ] [ <number_of_vdp_hosts> ] [ <number_of_associated_interfaces> ] [ <profile_be_un_applied_in_seconds> ] [ <new_vdp_requests_be_accepted_in_seconds> ] [ <recovered_profile_be_checked_for_validity_in_seconds> ] [ <mac_aging_checked_in_seconds> ] [ <sent_to_database_manager_at> ] [ <received_parameters_from_database_manager_at> ] [ <displaying_parameters_for_profile> ] [ <displaying_parameters_for_instance> ] [ <no_parameters_for_the_profile> ] [ <displaying_re_written_parameters_for_vpc_role> ] [ TABLE_parameter [ <parameter_index> ] [ <parameter> ] ] [ TABLE_static_profile <profile> <instance> <no_parameters_for_the_profile> ] [ TABLE_migrated_profile <profile> <instance_index> <previous_profile> <previous_instance_index> ] [ TABLE_rollback_profile <profile> <instance_index> ] [ <got_vlan_allocated_from_vlan_manager_at> ] [ <sent_apply_to_configuration_manager_at> ] [ <completed_executing_all_commands_at> ] [ <sent_to_vpc_peer_at> ] [ <completed_executing_all_commands_on_vpc_peer_at> ] [ <sent_un_apply_to_configuration_manager_at> ] [ <completed_unapplying_all_commands_at> ] ] [ TABLE_database_host_vni { [ <vni_id> ] [ <vlan_id> ] [ <state> <flag> <profile_name> <instance_name> ] [ <packet_arrival_time> <request_profile_time> <got_profile_time> <sent_to_PPM_time> <profile_apply_time> <del_to_PPM_time> ] [ { TABLE_database_host_detail <interface> <encap> <flags> <state> [ <vsi_id> ] } ] } ] [ TABLE_database_host_vlan { [ <vlan_id> ] [ <vni_id> ] [ <state> <flag> <profile_name> <instance_name> ] [ <packet_arrival_time> <request_profile_time> <got_profile_time> <sent_to_PPM_time> <profile_apply_time> <del_to_PPM_time> ] [ { TABLE_database_host_detail <interface> <encap> <flags> <state> [ <vsi_id> ] } ] } ] [ TABLE_extranet_vrf_entries { <vrf> <l3_vni> <state> <profile> <instance> } ] ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

host

Host to profile mapping

detail

(Optional) Show VDP hosts and interfaces

vni

(Optional) Virtual Network Identifier

vni-id

(Optional)

dot1q

(Optional) Dot1Q Encapsulation

vlan-id

(Optional)

__readonly__

(Optional) Read Only

TABLE_database_host

(Optional) table show fabric database host {dot1q | vni}

trigger_source

(Optional) TODO

client_type

(Optional) TODO

got_trigger_at

(Optional) TODO

number_of_vdp_hosts

(Optional) TODO

number_of_associated_interfaces

(Optional) TODO

profile_be_un_applied_in_seconds

(Optional) TODO

new_vdp_requests_be_accepted_in_seconds

(Optional) TODO

recovered_profile_be_checked_for_validity_in_seconds

(Optional) TODO

mac_aging_checked_in_seconds

(Optional) TODO

sent_to_database_manager_at

(Optional) TODO

received_parameters_from_database_manager_at

(Optional) TODO

displaying_parameters_for_profile

(Optional) TODO

displaying_parameters_for_instance

(Optional) TODO

no_parameters_for_the_profile

(Optional) TODO

displaying_re_written_parameters_for_vpc_role

(Optional) TODO

TABLE_parameter

(Optional) table show the parameters

parameter_index

(Optional) TODO

parameter

(Optional) TODO

TABLE_static_profile

(Optional) show static profile

profile

(Optional) TODO

instance

(Optional) TODO

no_parameters_for_the_profile

(Optional) TODO

TABLE_migrated_profile

(Optional) show migrated profile

profile

(Optional) TODO

instance_index

(Optional) TODO

previous_profile

(Optional) TODO

previous_instance_index

(Optional) TODO

TABLE_rollback_profile

(Optional) show rollback profile

profile

(Optional) TODO

instance_index

(Optional) TODO

got_vlan_allocated_from_vlan_manager_at

(Optional) TODO

sent_apply_to_configuration_manager_at

(Optional) TODO

completed_executing_all_commands_at

(Optional) TODO

sent_to_vpc_peer_at

(Optional) TODO

completed_executing_all_commands_on_vpc_peer_at

(Optional) TODO

sent_un_apply_to_configuration_manager_at

(Optional) TODO

completed_unapplying_all_commands_at

(Optional) TODO

TABLE_database_host_vni

(Optional) table show fabric database host vni based

vni_id

(Optional) TODO Add comment

vlan_id

(Optional) TODO Add comment

state

(Optional) TODO Add comment

flag

(Optional) TODO

profile_name

(Optional) TODO

instance_name

(Optional) TODO

packet_arrival_time

(Optional) TODO

request_profile_time

(Optional) TODO

got_profile_time

(Optional) TODO

sent_to_PPM_time

(Optional) TODO

profile_apply_time

(Optional) TODO

del_to_PPM_time

(Optional) TODO

TABLE_database_host_detail

(Optional) table show fabric database host detail

interface

(Optional) TODO

encap

(Optional) TODO

flags

(Optional) TODO

state

(Optional) TODO

vsi_id

(Optional) TODO

TABLE_database_host_vlan

(Optional) table show fabric database host vlan based

vlan_id

(Optional) TODO Add comment

vni_id

(Optional) TODO Add comment

state

(Optional) TODO Add comment

flag

(Optional) TODO

profile_name

(Optional) TODO

instance_name

(Optional) TODO

packet_arrival_time

(Optional) TODO

request_profile_time

(Optional) TODO

got_profile_time

(Optional) TODO

sent_to_PPM_time

(Optional) TODO

profile_apply_time

(Optional) TODO

del_to_PPM_time

(Optional) TODO

TABLE_database_host_detail

(Optional) table show fabric database host detail

interface

(Optional) TODO

encap

(Optional) TODO

flags

(Optional) TODO

state

(Optional) TODO

vsi_id

(Optional) TODO

TABLE_extranet_vrf_entries

(Optional) table extranet VRF entries

vrf

(Optional) TODO

l3_vni

(Optional) TODO

state

(Optional) TODO

profile

(Optional) TODO

instance

(Optional) TODO

Command Mode

- /exec

show fabric database host

show fabric database host [ detail ] [ { vni <vni-id> } | { dot1q <vlan-id> } ] [ internal ] [ __readonly__ [ TABLE_database_host [ <trigger_source> ] [ <client_type> ] [ <got_trigger_at> ] [ <number_of_vdp_hosts> ] [ <number_of_associated_interfaces> ] [ <profile_be_un_applied_in_seconds> ] [ <new_vdp_requests_be_accepted_in_seconds> ] [ <recovered_profile_be_checked_for_validity_in_seconds> ] [ <sent_to_database_manager_at> ] [ <received_parameters_from_database_manager_at> ] [ <displaying_parameters_for_profile> ] [ <displaying_parameters_for_instance> ] [ <no_parameters_for_the_profile> ] [ <got_vlan_allocated_from_vlan_manager_at> ] [ <sent_apply_to_configuration_manager_at> ] [ <completed_executing_all_commands_at> ] [ <sent_to_vpc_peer_at> ] [ <completed_executing_all_commands_on_vpc_peer_at> ] [ <sent_un_apply_to_configuration_manager_at> ] [ <completed_unapplying_all_commands_at> ] [ <displaying_re_written_parameters_for_vpc_role> ] [ TABLE_parameter [ <parameter_index> ] [ <parameter> ] ] [ TABLE_static_profile <profile> <instance> <no_parameters_for_the_profile> ] [ TABLE_migrated_profile <profile> <instance_index> <previous_profile> <previous_instance_index> ] [ TABLE_rollback_profile <profile> <instance_index> ] ] [ TABLE_database_host_vni { [ <vni_id> ] [ <vlan_id> ] [ <state> <flag> <profile_name> <instance_name> ] [ <packet_arrival_time> <request_profile_time> <got_profile_time> <sent_to_PPM_time> <profile_apply_time> <del_to_PPM_time> ] [ { TABLE_database_host_detail <interface> <encap> <flags> <state> [ <vsi_id> ] } ] } ] [ TABLE_database_host_vlan { [ <vlan_id> ] [ <vni_id> ] [ <state> <flag> <profile_name> <instance_name> ] [ <packet_arrival_time> <request_profile_time> <got_profile_time> <sent_to_PPM_time> <profile_apply_time> <del_to_PPM_time> ] [ { TABLE_database_host_detail <interface> <encap> <flags> <state> [ <vsi_id> ] } ] } ] [ TABLE_extranet_vrf_entries { <vrf> <l3_vni> <state> <profile> <instance> } ] ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

host

Host to profile mapping

detail

(Optional) Show VDP hosts and interfaces

vni

(Optional) Virtual Network Identifier

vni-id

(Optional)

dot1q

(Optional) Dot1Q Encapsulation

vlan-id

(Optional)

internal

(Optional) Internal command

__readonly__

(Optional) Read Only

TABLE_database_host

(Optional) table show fabric database host {dot1q | vni}

trigger_source

(Optional) TODO

client_type

(Optional) TODO

got_trigger_at

(Optional) TODO

number_of_vdp_hosts

(Optional) TODO

number_of_associated_interfaces

(Optional) TODO

profile_be_un_applied_in_seconds

(Optional) TODO

new_vdp_requests_be_accepted_in_seconds

(Optional) TODO

recovered_profile_be_checked_for_validity_in_seconds

(Optional) TODO

sent_to_database_manager_at

(Optional) TODO

received_parameters_from_database_manager_at

(Optional) TODO

displaying_parameters_for_profile

(Optional) TODO

displaying_parameters_for_instance

(Optional) TODO

no_parameters_for_the_profile

(Optional) TODO

got_vlan_allocated_from_vlan_manager_at

(Optional) TODO

sent_apply_to_configuration_manager_at

(Optional) TODO

completed_executing_all_commands_at

(Optional) TODO

sent_to_vpc_peer_at

(Optional) TODO

completed_executing_all_commands_on_vpc_peer_at

(Optional) TODO

sent_un_apply_to_configuration_manager_at

(Optional) TODO

completed_unapplying_all_commands_at

(Optional) TODO

displaying_re_written_parameters_for_vpc_role

(Optional) TODO

TABLE_parameter

(Optional) table show the parameters

parameter_index

(Optional) TODO

parameter

(Optional) TODO

TABLE_static_profile

(Optional) show static profile

profile

(Optional) TODO

instance

(Optional) TODO

no_parameters_for_the_profile

(Optional) TODO

TABLE_migrated_profile

(Optional) show migrated profile

profile

(Optional) TODO

instance_index

(Optional) TODO

previous_profile

(Optional) TODO

previous_instance_index

(Optional) TODO

TABLE_rollback_profile

(Optional) show rollback profile

profile

(Optional) TODO

instance_index

(Optional) TODO

TABLE_database_host_vni

(Optional) table show fabric database host vni based

vni_id

(Optional) TODO Add comment

vlan_id

(Optional) TODO Add comment

state

(Optional) TODO Add comment

flag

(Optional) TODO

profile_name

(Optional) TODO

instance_name

(Optional) TODO

packet_arrival_time

(Optional) TODO

request_profile_time

(Optional) TODO

got_profile_time

(Optional) TODO

sent_to_PPM_time

(Optional) TODO

profile_apply_time

(Optional) TODO

del_to_PPM_time

(Optional) TODO

TABLE_database_host_detail

(Optional) table show fabric database host detail

interface

(Optional) TODO

encap

(Optional) TODO

flags

(Optional) TODO

state

(Optional) TODO

vsi_id

(Optional) TODO

TABLE_database_host_vlan

(Optional) table show fabric database host vlan based

vlan_id

(Optional) TODO Add comment

vni_id

(Optional) TODO Add comment

state

(Optional) TODO Add comment

flag

(Optional) TODO

profile_name

(Optional) TODO

instance_name

(Optional) TODO

packet_arrival_time

(Optional) TODO

request_profile_time

(Optional) TODO

got_profile_time

(Optional) TODO

sent_to_PPM_time

(Optional) TODO

profile_apply_time

(Optional) TODO

del_to_PPM_time

(Optional) TODO

TABLE_database_host_detail

(Optional) table show fabric database host detail

interface

(Optional) TODO

encap

(Optional) TODO

flags

(Optional) TODO

state

(Optional) TODO

vsi_id

(Optional) TODO

TABLE_extranet_vrf_entries

(Optional) table extranet VRF entries

vrf

(Optional) TODO

l3_vni

(Optional) TODO

state

(Optional) TODO

profile

(Optional) TODO

instance

(Optional) TODO

Command Mode

- /exec

show fabric database host internal

show fabric database host [ detail ] [ { vni <vni-id> } | { dot1q <vlan-id> } ] internal

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

host

Host to profile mapping

detail

(Optional) Show VDP hosts and interfaces

vni

(Optional) Virtual Network Identifier

vni-id

(Optional)

dot1q

(Optional) Dot1Q Encapsulation

vlan-id

(Optional)

internal

Internal command

Command Mode

- /exec

show fabric database host statistics

show fabric database host statistics [ __readonly__ [ TABLE_database_host_statistics { [ <data_snoop_triggers> ] [ <data_snoop_deletes> ] [ <vdp_association_requests> ] [ <vdp_deassociation_requests> ] [ <vdp_association_responses> ] [ <vdp_error_responses> ] [ <unsupported_interfaces> ] [ <no_profile_map_errors> ] [ <outstanding_delete_retry_add> ] [ <duplicate_add_existing_host> ] [ <hmm_api_error_cannot_add_host> ] [ <existing_profile_new_host> ] [ <profile_apply_from_vpc_peer> ] [ <profile_un_apply_from_vpc_peer> ] [ <host_apply_from_vpc_peer> ] [ <host_un_apply_from_vpc_peer> ] [ <early_delete_cancel_add> ] [ <dhcp_requests> ] [ <dhcp_responses> ] [ <dhcp_error_responses> ] [ <adbm_requests> ] [ <adbm_responses> ] [ <adbm_error_responses> ] [ <adbm_error_requests> ] [ <vnseg_no_bridge_domain> ] [ <vnseg_encap_responses> ] [ <vnseg_vni_responses> ] [ <vnseg_unknown_responses> ] [ <vnseg_bd_down_notif> ] [ <no_mac_on_bd_notif> ] [ <refresh_failures> ] [ <profile_apply_received> ] [ <profile_vpc_queued> ] [ <profile_local_apply_queued> ] [ <profile_local_unapply_queued> ] [ <profile_apply_sent> ] [ <profile_apply_responses> ] [ <profile_apply_success> ] [ <profile_unapply_success> ] [ <profile_apply_failure> ] [ <profile_commands> ] [ <profile_error_incomplete_configs> ] [ <profile_api_error> ] [ <profile_unapply_sent> ] [ <profile_top_queue_adds> ] [ <profile_high_queue_adds> ] [ <profile_low_queue_adds> ] [ <profile_unapply_failure> ] [ <outstanding_vlan_requests> ] [ <outstanding_adbm_requests> ] [ <outstanding_profile_applies> ] [ <outstanding_vpc_profile_applies> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

host

Auto-configured Hosts

statistics

Statistics - Mostly shows non-zero values

__readonly__

(Optional) Read Only

TABLE_database_host_statistics

(Optional) table show fabric database host statistics

data_snoop_triggers

(Optional) TODO

data_snoop_deletes

(Optional) TODO

vdp_association_requests

(Optional) TODO

vdp_deassociation_requests

(Optional) TODO

vdp_association_responses

(Optional) TODO

vdp_error_responses

(Optional) TODO

unsupported_interfaces

(Optional) TODO

no_profile_map_errors

(Optional) TODO

outstanding_delete_retry_add

(Optional) TODO

duplicate_add_existing_host

(Optional) TODO

hmm_api_error_cannot_add_host

(Optional) TODO

existing_profile_new_host

(Optional) TODO

profile_apply_from_vpc_peer

(Optional) TODO

profile_un_apply_from_vpc_peer

(Optional) TODO

host_apply_from_vpc_peer

(Optional) TODO

host_un_apply_from_vpc_peer

(Optional) TODO

early_delete_cancel_add

(Optional) TODO

dhcp_requests

(Optional) TODO

dhcp_responses

(Optional) TODO

dhcp_error_responses

(Optional) TODO

adbm_requests

(Optional) TODO

adbm_responses

(Optional) TODO

adbm_error_responses

(Optional) TODO

adbm_error_requests

(Optional) TODO

vnseg_no_bridge_domain

(Optional) TODO

vnseg_encap_responses

(Optional) TODO

vnseg_vni_responses

(Optional) TODO

vnseg_unknown_responses

(Optional) TODO

vnseg_bd_down_notif

(Optional) TODO

no_mac_on_bd_notif

(Optional) TODO

refresh_failures

(Optional) TODO

profile_apply_received

(Optional) TODO

profile_vpc_queued

(Optional) TODO

profile_local_apply_queued

(Optional) TODO

profile_local_unapply_queued

(Optional) TODO

profile_apply_sent

(Optional) TODO

profile_apply_responses

(Optional) TODO

profile_apply_success

(Optional) TODO

profile_unapply_success

(Optional) TODO

profile_apply_failure

(Optional) TODO

profile_commands

(Optional) TODO

profile_error_incomplete_configs

(Optional) TODO

profile_api_error

(Optional) TODO

profile_unapply_sent

(Optional) TODO

profile_top_queue_adds

(Optional) TODO

profile_high_queue_adds

(Optional) TODO

profile_low_queue_adds

(Optional) TODO

profile_unapply_failure

(Optional) TODO

outstanding_vlan_requests

(Optional) TODO

outstanding_adbm_requests

(Optional) TODO

outstanding_profile_applies

(Optional) TODO

outstanding_vpc_profile_applies

(Optional) TODO

Command Mode

- /exec

show fabric database host statistics

show fabric database host statistics [ __readonly__ [ TABLE_database_host_statistics { [ <data_snoop_triggers> ] [ <data_snoop_deletes> ] [ <vdp_association_requests> ] [ <vdp_deassociation_requests> ] [ <vdp_association_responses> ] [ <vdp_error_responses> ] [ <unsupported_interfaces> ] [ <no_profile_map_errors> ] [ <outstanding_delete_retry_add> ] [ <duplicate_add_existing_host> ] [ <hmm_api_error_cannot_add_host> ] [ <existing_profile_new_host> ] [ <profile_apply_from_vpc_peer> ] [ <profile_un_apply_from_vpc_peer> ] [ <host_apply_from_vpc_peer> ] [ <host_un_apply_from_vpc_peer> ] [ <early_delete_cancel_add> ] [ <dhcp_requests> ] [ <dhcp_responses> ] [ <dhcp_error_responses> ] [ <adbm_requests> ] [ <adbm_responses> ] [ <adbm_error_responses> ] [ <adbm_error_requests> ] [ <vnseg_no_bridge_domain> ] [ <vnseg_encap_responses> ] [ <vnseg_vni_responses> ] [ <vnseg_unknown_responses> ] [ <refresh_failures> ] [ <profile_apply_received> ] [ <profile_vpc_queued> ] [ <profile_local_apply_queued> ] [ <profile_local_unapply_queued> ] [ <profile_apply_sent> ] [ <profile_apply_responses> ] [ <profile_apply_success> ] [ <profile_unapply_success> ] [ <profile_apply_failure> ] [ <profile_commands> ] [ <profile_error_incomplete_configs> ] [ <profile_api_error> ] [ <profile_unapply_sent> ] [ <profile_top_queue_adds> ] [ <profile_high_queue_adds> ] [ <profile_low_queue_adds> ] [ <profile_unapply_failure> ] [ <outstanding_vlan_requests> ] [ <outstanding_adbm_requests> ] [ <outstanding_profile_applies> ] [ <outstanding_vpc_profile_applies> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

host

Auto-configured Hosts

statistics

Statistics - Mostly shows non-zero values

__readonly__

(Optional) Read Only

TABLE_database_host_statistics

(Optional) table show fabric database host statistics

data_snoop_triggers

(Optional) TODO

data_snoop_deletes

(Optional) TODO

vdp_association_requests

(Optional) TODO

vdp_deassociation_requests

(Optional) TODO

vdp_association_responses

(Optional) TODO

vdp_error_responses

(Optional) TODO

unsupported_interfaces

(Optional) TODO

no_profile_map_errors

(Optional) TODO

outstanding_delete_retry_add

(Optional) TODO

duplicate_add_existing_host

(Optional) TODO

hmm_api_error_cannot_add_host

(Optional) TODO

existing_profile_new_host

(Optional) TODO

profile_apply_from_vpc_peer

(Optional) TODO

profile_un_apply_from_vpc_peer

(Optional) TODO

host_apply_from_vpc_peer

(Optional) TODO

host_un_apply_from_vpc_peer

(Optional) TODO

early_delete_cancel_add

(Optional) TODO

dhcp_requests

(Optional) TODO

dhcp_responses

(Optional) TODO

dhcp_error_responses

(Optional) TODO

adbm_requests

(Optional) TODO

adbm_responses

(Optional) TODO

adbm_error_responses

(Optional) TODO

adbm_error_requests

(Optional) TODO

vnseg_no_bridge_domain

(Optional) TODO

vnseg_encap_responses

(Optional) TODO

vnseg_vni_responses

(Optional) TODO

vnseg_unknown_responses

(Optional) TODO

refresh_failures

(Optional) TODO

profile_apply_received

(Optional) TODO

profile_vpc_queued

(Optional) TODO

profile_local_apply_queued

(Optional) TODO

profile_local_unapply_queued

(Optional) TODO

profile_apply_sent

(Optional) TODO

profile_apply_responses

(Optional) TODO

profile_apply_success

(Optional) TODO

profile_unapply_success

(Optional) TODO

profile_apply_failure

(Optional) TODO

profile_commands

(Optional) TODO

profile_error_incomplete_configs

(Optional) TODO

profile_api_error

(Optional) TODO

profile_unapply_sent

(Optional) TODO

profile_top_queue_adds

(Optional) TODO

profile_high_queue_adds

(Optional) TODO

profile_low_queue_adds

(Optional) TODO

profile_unapply_failure

(Optional) TODO

outstanding_vlan_requests

(Optional) TODO

outstanding_adbm_requests

(Optional) TODO

outstanding_profile_applies

(Optional) TODO

outstanding_vpc_profile_applies

(Optional) TODO

Command Mode

- /exec

show fabric database host summary

show fabric database host summary [ __readonly__ [ TABLE_database_host_summary { <number_of_instances_applied> <number_of_vdp_hosts> <recovery_timeout_minute> <cleanup_timeout_minute> <vdp_add_suppression_timeout_minute> <mac_aging_timeout_minute> } ] ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

host

Auto-configured Hosts

summary

Summary

__readonly__

(Optional) Read Only

TABLE_database_host_summary

(Optional) table show fabric database host summary

number_of_instances_applied

(Optional) TODO

number_of_vdp_hosts

(Optional) TODO

recovery_timeout_minute

(Optional) TODO

cleanup_timeout_minute

(Optional) TODO

vdp_add_suppression_timeout_minute

(Optional) TODO

mac_aging_timeout_minute

(Optional) TODO

Command Mode

- /exec

show fabric database host summary

show fabric database host summary [ __readonly__ [ TABLE_database_host_summary { <number_of_instances_applied> <number_of_vdp_hosts> <recovery_timeout_minute> <cleanup_timeout_minute> <vdp_add_suppression_timeout_minute> } ] ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

host

Auto-configured Hosts

summary

Summary

__readonly__

(Optional) Read Only

TABLE_database_host_summary

(Optional) table show fabric database host summary

number_of_instances_applied

(Optional) TODO

number_of_vdp_hosts

(Optional) TODO

recovery_timeout_minute

(Optional) TODO

cleanup_timeout_minute

(Optional) TODO

vdp_add_suppression_timeout_minute

(Optional) TODO

Command Mode

- /exec

show fabric database internal profile-data

show fabric database internal profile-data

Syntax Description

Syntax Description

show

Show running system information

fabric

database

internal

Internal information

profile-data

Data learnt from the profile

Command Mode

- /exec

show fabric database profile-map

show fabric database profile-map { global | [ <id> | interface <interface-id> ] } [ __readonly__ [ TABLE_database_profile_map { <map> <proto> <vni> <dot1q> <flags> <profile_name> } ] ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

profile-map

Profile Map

global

Global profile (apply to all interfaces)

id

(Optional) Profile Map ID

interface

(Optional) Specified interface to display

interface-id

(Optional) Name of interface

__readonly__

(Optional) Read Only

TABLE_database_profile_map

(Optional) table show fabric database profile-map

map

(Optional) TODO

proto

(Optional) TODO

vni

(Optional) TODO

dot1q

(Optional) TODO

flags

(Optional) TODO

profile_name

(Optional) TODO

Command Mode

- /exec

show fabric database profile-map

show fabric database profile-map { global | [ <id> | interface <interface-id> ] } [ __readonly__ [ TABLE_database_profile_map { <map> <proto> <vni> <dot1q> <flags> <profile_name> } ] ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

database

Fabric Database

profile-map

Profile Map

global

Global profile (apply to all interfaces)

id

(Optional) Profile Map ID

interface

(Optional) Specified interface to display

interface-id

(Optional) Name of interface

__readonly__

(Optional) Read Only

TABLE_database_profile_map

(Optional) table show fabric database profile-map

map

(Optional) TODO

proto

(Optional) TODO

vni

(Optional) TODO

dot1q

(Optional) TODO

flags

(Optional) TODO

profile_name

(Optional) TODO

Command Mode

- /exec

show fabric database statistics

show fabric database statistics [ type { network | profile | cabling | partition | bl-dci } ] [ __readonly__ { TABLE_types <dbtype> <requests> <dispatched> <not_dispatched> <re_dispatched> } [ { TABLE_dbs <is_active> <type> <prot> <serverdb> [ <reqs> <ok> <nores> <err> <tmout> <pend> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

database

Show Fabric Database

statistics

Show database statistics

type

(Optional) Enter database type

network

(Optional) Network Database

profile

(Optional) Port or Switch Profile Database

cabling

(Optional) Cable Management Database

partition

(Optional) Partition Database

bl-dci

(Optional) Border Leaf - DCI

__readonly__

(Optional)

TABLE_types

(Optional) totals by type

dbtype

(Optional) type of database

requests

(Optional) number of requests

dispatched

(Optional) number dispatched

not_dispatched

(Optional) number not dispatched

re_dispatched

(Optional) number re-dispatched

TABLE_dbs

(Optional) per-database stats

is_active

(Optional) active/inactive

type

(Optional) database type

prot

(Optional) database protocol

serverdb

(Optional) server database

reqs

(Optional) requests

ok

(Optional) OK

nores

(Optional) nores

err

(Optional) err

tmout

(Optional) tmout

pend

(Optional) pend

Command Mode

- /exec

show fabric forwarding host-db

show fabric forwarding host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ __readonly__ [ TABLE_forwarding_host_db_vrf { <vrf> <vrf_id> <vrf_state> <vrf_reason> <vni_id> <refcount> <conversational_learning> [ TABLE_limit_type <limit_type> <enable> <threshold> <action> ] [ TABLE_ipv4 <address_family> <vrf> <table_id> <table_state> <refcount> <local_hosts> <remote_hosts> <aggregates> [ TABLE_aggregate_list <aggregate_subnet_prefix_list> ] ] [ TABLE_ipv6 <address_family> <vrf> <table_id> <table_state> <refcount> <local_hosts> <remote_hosts> <aggregates> [ TABLE_aggregate_list <aggregate_subnet_prefix_list> ] ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

host-db

Host Database info

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional) Read Only

TABLE_forwarding_host_db_vrf

(Optional) table show fabric forwarding host-db vrf

vrf

(Optional) TODO

vrf_id

(Optional) TODO

vrf_state

(Optional) TODO

vrf_reason

(Optional) TODO

vni_id

(Optional) TODO

refcount

(Optional) TODO

conversational_learning

(Optional) TODO

TABLE_limit_type

(Optional) table for limit type

limit_type

(Optional) TODO

enable

(Optional) TODO

threshold

(Optional) TODO

action

(Optional) TODO

TABLE_ipv4

(Optional) Information for address family IPv4

address_family

(Optional) TODO

vrf

(Optional) TODO

table_id

(Optional) TODO

table_state

(Optional) TODO

refcount

(Optional) TODO

local_hosts

(Optional) TODO

remote_hosts

(Optional) TODO

aggregates

(Optional) TODO

TABLE_aggregate_list

(Optional) table for aggregate subnet prefix list

aggregate_subnet_prefix_list

(Optional) TODO

TABLE_ipv6

(Optional) Information for address family IPv6

address_family

(Optional) TODO

vrf

(Optional) TODO

table_id

(Optional) TODO

table_state

(Optional) TODO

refcount

(Optional) TODO

local_hosts

(Optional) TODO

remote_hosts

(Optional) TODO

aggregates

(Optional) TODO

TABLE_aggregate_list

(Optional) table for aggregate subnet prefix list

aggregate_subnet_prefix_list

(Optional) TODO

Command Mode

- /exec

show fabric forwarding internal af

show fabric forwarding internal af [ { vrf { <vrf-name> | <vrf-known-name> | all } } ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

internal

Internal information

af

Show AF info

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show fabric forwarding internal buffers

show fabric forwarding internal buffers [ vPC ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

internal

Internal information

buffers

Internal buffer state maintained by HMM

vPC

(Optional) vPC buffer information

Command Mode

- /exec

show fabric forwarding internal clients

show fabric forwarding internal clients

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

internal

Internal information

clients

Clients of RPM

Command Mode

- /exec

show fabric forwarding internal debug

show fabric forwarding internal debug

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

internal

Internal information

debug

Internal debug info maintained by HMM

Command Mode

- /exec

show fabric forwarding internal event-history

show fabric forwarding internal event-history { errors | msgs | trace | events | packets | ha | periodic | auto-config | test }

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

internal

Internal information

event-history

Show various event logs of HMM

errors

Show error logs of HMM

msgs

Show various message logs of HMM

trace

Show processing logs of HMM commands

events

Show HMM process events

packets

Show HMM process Packet events

ha

Show HMM process HA debugs

periodic

Show HMM process periodic events

auto-config

Show HMM process auto-config events

test

Show HMM process test events

Command Mode

- /exec

show fabric forwarding internal intf local

show fabric forwarding internal intf { local-host-db [ esi ] | remote-host-db } [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <interface> ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

internal

Internal information

intf

Interface on which local host is learnt

local-host-db

HMM local host database

remote-host-db

HMM remote host database

esi

(Optional) Port to ESI information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

interface

(Optional) Interface name

Command Mode

- /exec

show fabric forwarding internal ip dup-host

show fabric forwarding internal { ip | ipv6 } dup-host [ { vrf { <vrf-name> | <vrf-known-name> | all } } ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

internal

Internal information

ip

Display IP information

ipv6

Display IPv6 information

dup-host

Duplicate host

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show fabric forwarding internal ip local-host-db

show fabric forwarding internal ip local-host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <ip-prefix> ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

internal

Internal information

ip

Display IP information

local-host-db

HMM Local Host Database

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ip-prefix

(Optional) IP prefix in CIDR format

Command Mode

- /exec

show fabric forwarding internal ipv6 local-host-db

show fabric forwarding internal ipv6 local-host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <ipv6-prefix> ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

internal

Internal information

ipv6

Display IPv6 information

local-host-db

HMM Local Host Database

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show fabric forwarding internal mac-bd local-host-db

show fabric forwarding internal mac-bd local-host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <mac-addr> <bd> ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

internal

Internal information

mac-bd

MAC-BD information

local-host-db

HMM local host database

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

mac-addr

(Optional) MAC address

bd

(Optional) S/W BD

Command Mode

- /exec

show fabric forwarding internal mem-stats

show fabric forwarding internal mem-stats [ all ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

internal

Internal information

mem-stats

Dynamic memory stats

all

(Optional) Display private and shared memory statistics

detail

(Optional) Detailed information

Command Mode

- /exec

show fabric forwarding internal migration-vips

show fabric forwarding internal migration-vips [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <svi-intf> ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

internal

Internal information

migration-vips

HMM VIPs DB for migration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

svi-intf

(Optional) Vlan Interface name

Command Mode

- /exec

show fabric forwarding internal sdb

show fabric forwarding internal sdb

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

internal

Internal information

sdb

SDB state

Command Mode

- /exec

show fabric forwarding internal state

show fabric forwarding internal state

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

internal

Internal information

state

Internal state maintained by HMM

Command Mode

- /exec

show fabric forwarding internal state vPC

show fabric forwarding internal state vPC

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

internal

Internal information

state

Internal state maintained by HMM

vPC

Internal vPC state maintained by HMM

Command Mode

- /exec

show fabric forwarding internal svi-info

show fabric forwarding internal svi-info [ <svi-intf> ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

internal

Internal information

svi-info

SVI information DB

svi-intf

(Optional) Vlan Interface name

Command Mode

- /exec

show fabric forwarding internal topo-info

show fabric forwarding internal topo-info [ <topo-id> | stale ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

internal

Internal information

topo-info

E-VPN identifier

topo-id

(Optional) E-VPN identifier (VLAN-ID or BD-ID)

stale

(Optional) Display staled E-VPN identifier

Command Mode

- /exec

show fabric forwarding internal work-info

show fabric forwarding internal work-info

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

internal

Internal information

work-info

Internal HMM worker thread info

Command Mode

- /exec

show fabric forwarding ip

show fabric forwarding ip { { local-host-db | remote-host-db | aggregate-subnet-prefix } [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <ip-prefix> ] } [ __readonly__ [ TABLE_forwarding_ip_local_host_db_vrf { <hmm_host> <vrf> <status_in> { TABLE_hosts <host> <mac_address> <svi> <flags_0x> <physical_interface> <status> } } ] [ TABLE_forwarding_ip_remote_host_db_vrf { <hmm_host> <vrf> <status_in> { TABLE_hosts <host> <source> <active> <flags_0x> <status> } } ] [ TABLE_forwarding_ip_aggregate_subnet_prefix_vrf { <hmm_host> <vrf> <status_in> { TABLE_hosts <host> <type> <flags_0x> <status> } } ] ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

ip

Display IP information

local-host-db

HMM Local Host Database

remote-host-db

HMM Remote Host Database

aggregate-subnet-prefix

HMM Aggregate subnet prefix

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ip-prefix

(Optional) IP prefix in CIDR format

__readonly__

(Optional) Read Only

TABLE_forwarding_ip_local_host_db_vrf

(Optional) table show fabric forwarding ip local-host-db vrf

hmm_host

(Optional) TODO

vrf

(Optional) TODO

status_in

(Optional) TODO

TABLE_hosts

(Optional) table show information for each hosts

host

(Optional) TODO

mac_address

(Optional) TODO

svi

(Optional) TODO

flags_0x

(Optional) TODO

physical_interface

(Optional) TODO

status

(Optional) *-valid, x-deleted, a-aged out, c-cleaned

TABLE_forwarding_ip_remote_host_db_vrf

(Optional) table show fabric forwarding ip remote-host-db vrf

hmm_host

(Optional) TODO

vrf

(Optional) TODO

status_in

(Optional) TODO

TABLE_hosts

(Optional) table show information for each hosts

host

(Optional) TODO

source

(Optional) TODO

active

(Optional) TODO

flags_0x

(Optional) TODO

status

(Optional) *-valid, x-deleted, a-aged out, c-cleaned

TABLE_forwarding_ip_aggregate_subnet_prefix_vrf

(Optional) table show fabric forwarding ip aggregate-subnet-prefix vrf

hmm_host

(Optional) TODO

vrf

(Optional) TODO

status_in

(Optional) TODO

TABLE_hosts

(Optional) table show information for each hosts

host

(Optional) TODO

type

(Optional) TODO

flags_0x

(Optional) TODO

status

(Optional) *-valid, x-deleted, a-aged out, c-cleaned

Command Mode

- /exec

show fabric forwarding ipv6

show fabric forwarding ipv6 { { local-host-db | remote-host-db | aggregate-subnet-prefix } [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <ipv6-prefix> ] } [ __readonly__ [ TABLE_forwarding_ipv6_local_host_db_vrf { <hmm_host> <vrf> <status_in> { TABLE_hosts <host> <mac_address> <svi> <flags_0x> <physical_interface> <status> } } ] [ TABLE_forwarding_ipv6_remote_host_db_vrf { <hmm_host> <vrf> <status_in> { TABLE_hosts <host> <source> <active> <flags_0x> <status> } } ] [ TABLE_forwarding_ipv6_aggregate_subnet_prefix_vrf { <hmm_host> <vrf> <status_in> { TABLE_hosts <host> <type> <flags_0x> <status> } } ] ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

ipv6

Display IPv6 information

local-host-db

HMM Local Host Database

remote-host-db

HMM Remote Host Database

aggregate-subnet-prefix

HMM Aggregate subnet prefix

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional) Read Only

TABLE_forwarding_ipv6_local_host_db_vrf

(Optional) table show fabric forwarding ipv6 local-host-db vrf

hmm_host

(Optional) TODO

vrf

(Optional) TODO

status_in

(Optional) TODO

TABLE_hosts

(Optional) table show information for each hosts

host

(Optional) TODO

mac_address

(Optional) TODO

svi

(Optional) TODO

flags_0x

(Optional) TODO

physical_interface

(Optional) TODO

status

(Optional) *-valid, x-deleted, a-aged out, c-cleaned

TABLE_forwarding_ipv6_remote_host_db_vrf

(Optional) table show fabric forwarding ipv6 remote-host-db vrf

hmm_host

(Optional) TODO

vrf

(Optional) TODO

status_in

(Optional) TODO

TABLE_hosts

(Optional) table show information for each hosts

host

(Optional) TODO

source

(Optional) TODO

active

(Optional) TODO

flags_0x

(Optional) TODO

status

(Optional) *-valid, x-deleted, a-aged out, c-cleaned

TABLE_forwarding_ipv6_aggregate_subnet_prefix_vrf

(Optional) table show fabric forwarding ipv6 aggregate-subnet-prefix vrf

hmm_host

(Optional) TODO

vrf

(Optional) TODO

status_in

(Optional) TODO

TABLE_hosts

(Optional) table show information for each hosts

host

(Optional) TODO

type

(Optional) TODO

flags_0x

(Optional) TODO

status

(Optional) *-valid, x-deleted, a-aged out, c-cleaned

Command Mode

- /exec

show fabric forwarding statistics conversational-learning

show fabric forwarding statistics conversational-learning [ ip | ipv6 ] { source-limit [ <ip-prefix> | <ipv6-prefix> ] | max-conversation-limit | port-limit [ <port> ] } [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ __readonly__ [ TABLE_forwarding_stat_conv_learning_limit_stats_for_vrf { <vrf> <limit_type> <enable> [ <threshold> ] [ <action> ] [ { TABLE_limit_type_src <hmm_conv_learning_stats_for_address_family> <source> <in_add_q> <in_rib> <hit_threshold> } ] [ { TABLE_limite_type_total <type> <ipv4_r/p> <ipv6_r/p> <total> <hit_threshold> } ] [ { TABLE_limit_type_port <port> <ipv4_r/p> <ipv6_r/p> <total> <hit_threshold> } ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

statistics

Statistics

conversational-learning

Conversational Learning statistics based FIB Route Download

ip

(Optional) Display IP information

ipv6

(Optional) Display IPv6 information

source-limit

Number of active conversations from a source host

ip-prefix

(Optional) IP prefix in CIDR format

max-conversation-limit

Number of active conversations

port-limit

Number of active conversations from a physical port

port

(Optional) Interface name

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional) Read Only

TABLE_forwarding_stat_conv_learning_limit_stats_for_vrf

(Optional) table show fabric forwarding statistics conversational-learning

vrf

(Optional) TODO

limit_type

(Optional) TODO

enable

(Optional) TODO

threshold

(Optional) TODO

action

(Optional) TODO

TABLE_limit_type_src

(Optional) source-limit

hmm_conv_learning_stats_for_address_family

(Optional) TODO

source

(Optional) TODO

in_add_q

(Optional) TODO

in_rib

(Optional) TODO

hit_threshold

(Optional) TODO

TABLE_limite_type_total

(Optional) max-conversation-limit

type

(Optional) TODO

ipv4_r/p

(Optional) TODO

ipv6_r/p

(Optional) TODO

total

(Optional) TODO

hit_threshold

(Optional) TODO

TABLE_limit_type_port

(Optional) port-limit

port

(Optional) TODO

ipv4_r/p

(Optional) TODO

ipv6_r/p

(Optional) TODO

total

(Optional) TODO

hit_threshold

(Optional) TODO

Command Mode

- /exec

show fc2 bind

show fc2 bind

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

bind

show fc2 socket bindings

Command Mode

- /exec

show fc2 classf

show fc2 classf

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

classf

show fc2 classf sessions

Command Mode

- /exec

show fc2 exchange

show fc2 exchange

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

exchange

show fc2 active exchanges

Command Mode

- /exec

show fc2 exchresp

show fc2 exchresp

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

exchresp

show fc2 active responder exchanges

Command Mode

- /exec

show fc2 flogi

show fc2 flogi

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

flogi

show fc2 flogi table

Command Mode

- /exec

show fc2 internal cmdcode

show fc2 internal cmdcode

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

cmdcode

show fc2 cmd code information

Command Mode

- /exec

show fc2 internal cpuhog

show fc2 internal cpuhog

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

cpuhog

show fc2 cpuhog value

Command Mode

- /exec

show fc2 internal cpuperiod

show fc2 internal cpuperiod

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

cpuperiod

show fc2 cpu period value

Command Mode

- /exec

show fc2 internal cputimer

show fc2 internal cputimer

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

cputimer

show fc2 cpu timer value

Command Mode

- /exec

show fc2 internal debugmon

show fc2 internal debugmon

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

debugmon

show fc2 debugmon value

Command Mode

- /exec

show fc2 internal dest_index

show fc2 internal dest_index

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

dest_index

show fc2 driver debug dest index

Command Mode

- /exec

show fc2 internal device

show fc2 internal device

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

device

show fc2 inband device

Command Mode

- /exec

show fc2 internal event-history errors

show fc2 internal event-history errors

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

event-history

show fc2 event-history logs

errors

show fc2 event errors

Command Mode

- /exec

show fc2 internal event-history filt_msg

show fc2 internal event-history filt_msg

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

event-history

show fc2 event-history logs

filt_msg

show fc2 error filt_msg

Command Mode

- /exec

show fc2 internal event-history log_errors

show fc2 internal event-history log_errors

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

event-history

show fc2 event-history logs

log_errors

show fc2 error msgs

Command Mode

- /exec

show fc2 internal event-history msgs

show fc2 internal event-history msgs

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

event-history

show fc2 event-history logs

msgs

show fc2 msg logs

Command Mode

- /exec

show fc2 internal fc2_tx_enable

show fc2 internal fc2_tx_enable

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

fc2_tx_enable

show fc2 tx enable value

Command Mode

- /exec

show fc2 internal flag

show fc2 internal flag

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

flag

show fc2 driver flag

Command Mode

- /exec

show fc2 internal fragsize

show fc2 internal fragsize

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

fragsize

show fc2 skb fragment size in bytes

Command Mode

- /exec

show fc2 internal maxrxbuffer

show fc2 internal maxrxbuffer

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

maxrxbuffer

show fc2 max receive buffer size in bytes

Command Mode

- /exec

show fc2 internal memory_usage

show fc2 internal memory_usage

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

memory_usage

show fc2 memory usage

Command Mode

- /exec

show fc2 internal pid_tx

show fc2 internal pid_tx

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

pid_tx

show fc2 driver debug transmit pid

Command Mode

- /exec

show fc2 internal platform

show fc2 internal platform

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

platform

show fc2 platform flag

Command Mode

- /exec

show fc2 internal plogi

show fc2 internal plogi

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

plogi

show fc2 over-ride plogi parameters

Command Mode

- /exec

show fc2 internal reason_code

show fc2 internal reason_code

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

reason_code

show fc2 driver debug reason code

Command Mode

- /exec

show fc2 internal rxmaxpacket

show fc2 internal rxmaxpacket

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

rxmaxpacket

show fc2 receive max sequence number of packets

Command Mode

- /exec

show fc2 internal rxmaxsequence

show fc2 internal rxmaxsequence

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

rxmaxsequence

show fc2 receive max sequence value in bytes

Command Mode

- /exec

show fc2 internal sockqueue

show fc2 internal sockqueue <i0>

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

sockqueue

show fc2 socket receive queue contents

i0

fc2 socket address hex value

Command Mode

- /exec

show fc2 internal tstmpvalid

show fc2 internal tstmpvalid

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

tstmpvalid

show fc2 timestamp valid flag

Command Mode

- /exec

show fc2 internal txmaxsequence

show fc2 internal txmaxsequence

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

internal

show fc2 internal information

txmaxsequence

show fc2 transmit max sequence value in bytes

Command Mode

- /exec

show fc2 nport

show fc2 nport

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

nport

show fc2 local nports

Command Mode

- /exec

show fc2 plogi

show fc2 plogi

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

plogi

show fc2 plogi sessions

Command Mode

- /exec

show fc2 plogi_pwwn

show fc2 plogi_pwwn

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

plogi_pwwn

show fc2 plogi pwwn entries

Command Mode

- /exec

show fc2 port brief

show fc2 port brief

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

port

show fc2 physical port table

brief

display only active port counters

Command Mode

- /exec

show fc2 port drops

show fc2 port drops

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

port

show fc2 physical port table

drops

display active port drop counters

Command Mode

- /exec

show fc2 port state

show fc2 port state

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

port

show fc2 physical port table

state

display port state history

Command Mode

- /exec

show fc2 socket

show fc2 socket

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

socket

show fc2 active sockets

Command Mode

- /exec

show fc2 sockexch

show fc2 sockexch

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

sockexch

show fc2 active exchanges for each socket

Command Mode

- /exec

show fc2 socknotify

show fc2 socknotify

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

socknotify

show fc2 local nport plogi/logo notifications per each socket

Command Mode

- /exec

show fc2 socknport

show fc2 socknport

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

socknport

show fc2 local nports per each socket

Command Mode

- /exec

show fc2 vsan

show fc2 vsan

Syntax Description

Syntax Description

show

Show running system information

fc2

show fc2 tables and statistics

vsan

show fc2 vsan table

Command Mode

- /exec

show fcoe_klm internal event-history errors

show fcoe_klm internal event-history errors

Syntax Description

Syntax Description

show

Show running system information

fcoe_klm

show fcoe_klm tables and statistics

internal

show fcoe_klm internal information

event-history

show fcoe_klm event-history logs

errors

show fcoe_klm event errors

Command Mode

- /exec

show fcoe_klm internal event-history msgs

show fcoe_klm internal event-history msgs

Syntax Description

Syntax Description

show

Show running system information

fcoe_klm

show fcoe_klm tables and statistics

internal

show fcoe_klm internal information

event-history

show fcoe_klm event-history logs

msgs

show fcoe_klm msg logs

Command Mode

- /exec

show fcoe_klm internal flag

show fcoe_klm internal flag

Syntax Description

Syntax Description

show

Show running system information

fcoe_klm

show fcoe_klm tables and statistics

internal

show fcoe_klm internal information

flag

show fcoe_klm driver flag

Command Mode

- /exec

show fcoe_klm internal platform

show fcoe_klm internal platform

Syntax Description

Syntax Description

show

Show running system information

fcoe_klm

show fcoe_klm tables and statistics

internal

show fcoe_klm internal information

platform

show fcoe_klm driver platform

Command Mode

- /exec

show feature-set

show feature-set [ <name> ] [ <id> ] [ __readonly__ TABLE_cfcFeatureSetTable <cfcFeatureSetIndex> <cfcFeatureSetName> <cfcFeatureSetAction> <cfcFeatureSetLastAction> <cfcFeatureSetLastActionResult> <cfcFeatureSetLastFailureReason> <cfcFeatureSetOpStatus> <cfcFeatureSetOpStatusReason> ]

Syntax Description

Syntax Description

show

Show running system information

feature-set

Show feature set status

name

(Optional) feature-set name

id

(Optional) feature-set id

__readonly__

(Optional)

TABLE_cfcFeatureSetTable

(Optional) feature-set table

cfcFeatureSetIndex

(Optional) feature-set table index

cfcFeatureSetName

(Optional) feature-set name

cfcFeatureSetAction

(Optional) action

cfcFeatureSetLastAction

(Optional) last action

cfcFeatureSetLastActionResult

(Optional) last action result

cfcFeatureSetLastFailureReason

(Optional) last failure reason

cfcFeatureSetOpStatus

(Optional) operation status

cfcFeatureSetOpStatusReason

(Optional) operation status

Command Mode

- /exec

show feature-set services

show feature-set services <s0> [ __readonly__ { TABLE_services <service_name> } { <count> <feature_set> } ]

Syntax Description

Syntax Description

show

Show running system information

feature-set

Show feature set status

services

Show services in feature set

__readonly__

(Optional)

TABLE_services

(Optional) all service names in feature set

service_name

(Optional) name of the service

count

(Optional) number of services in the feature set

feature_set

(Optional) feature set name

s0

Name of feature set

Command Mode

- /exec

show feature

show feature [ __readonly__ [ { TABLE_cfcFeatureCtrlTable <cfcFeatureCtrlIndex2> <cfcFeatureCtrlInstanceNum2> <cfcFeatureCtrlName2> <cfcFeatureCtrlAction2> <cfcFeatureCtrlLastAction2> <cfcFeatureCtrlLastActionResult2> <cfcFeatureCtrlLastFailureReason2> <cfcFeatureCtrlOpStatus2> <cfcFeatureCtrlOpStatusReason2> <cfcFeatureCtrlTag2> } ] ]

Syntax Description

Syntax Description

show

Show running system information

feature

Show feature status

__readonly__

(Optional)

TABLE_cfcFeatureCtrlTable

(Optional) feature table

cfcFeatureCtrlIndex2

(Optional) feature table index

cfcFeatureCtrlInstanceNum2

(Optional) instance number

cfcFeatureCtrlName2

(Optional) feature name

cfcFeatureCtrlAction2

(Optional) Action to be triggered for the feature

cfcFeatureCtrlLastAction2

(Optional) Last action triggered for the feature

cfcFeatureCtrlLastActionResult2

(Optional) The result of execution of the last action

cfcFeatureCtrlLastFailureReason2

(Optional) Failure Reason

cfcFeatureCtrlOpStatus2

(Optional) operation status

cfcFeatureCtrlOpStatusReason2

(Optional) Reason for current operation status

cfcFeatureCtrlTag2

(Optional) Name of the instance in string format in case of multinstance feature

Command Mode

- /exec

show fhrp

show fhrp [ <intf> ] [ __readonly__ { TABLE_brief <intf_name> <intf_state> <ipv4_state> <ipv6_state> <hardware_status> <refcount> } ]

Syntax Description

Syntax Description

fhrp

FHRP Show commands

show

Show running system information

intf

(Optional) Specify a single interface

__readonly__

(Optional)

TABLE_brief

(Optional) Show brief FHRP interface information

intf_name

(Optional) Interface name

intf_state

(Optional) Interface state

ipv4_state

(Optional) Interface IPv4 state

ipv6_state

(Optional) Interface IPv6 state

hardware_status

(Optional) Interface hardware status

refcount

(Optional) Interface refcount

Command Mode

- /exec

show fhrp verbose

show fhrp [ <intf> ] verbose [ __readonly__ { TABLE_det <intf_name> <handle> <refcount> { TABLE_clients <client_id> <client_name> } <running> <expired> <v_retries> <v_time> <r_delay> <min_delay> <remaining_delay> <i_state> <ipv4_state> <ipv6_state> <h_state> <int_l2> } ]

Syntax Description

Syntax Description

fhrp

FHRP Show commands

show

Show running system information

intf

(Optional) Specify a single interface

verbose

Display detailed information

__readonly__

(Optional)

TABLE_det

(Optional) Detailed FHRP interface information

intf_name

(Optional) Interface name

handle

(Optional) Interface handle

refcount

(Optional) Reference count

TABLE_clients

(Optional) FHRP clients present on interface

client_id

(Optional) FHRP client id

client_name

(Optional) FHRP client name

running

(Optional) Time verify up timer running

expired

(Optional) Verify up timer has expired

v_retries

(Optional) Verify retries

v_time

(Optional) Verify remaining time

r_delay

(Optional) Reload delay

min_delay

(Optional) Min delay

remaining_delay

(Optional) Remaining delay

i_state

(Optional) Interface state

ipv4_state

(Optional) Interface IPv4 state

ipv6_state

(Optional) Interface IPv6 state

h_state

(Optional) Interface hardware state

int_l2

(Optional) Interface is L2-only

Command Mode

- /exec

show file

show file <uri0> [ cksum | md5sum | sha256sum | sha512sum ] [ __readonly__ { [ <file_content> ] + [ <file_content_cksum> ] [ <file_content_md5sum> ] [ <file_content_sha256sum> ] [ <file_content_sha512sum> ] } ]

Syntax Description

Syntax Description

show

Show running system information

file

Displays content of files

uri0

Filename to be displayed

cksum

(Optional) Displays CRC checksum for a file

md5sum

(Optional) Displays MD5 checksum for a file

sha256sum

(Optional) Displays SHA256 checksum for a file

sha512sum

(Optional) Displays SHA512 checksum for a file

__readonly__

(Optional) Read only

file_content

(Optional) uri file content buffer string

file_content_cksum

(Optional) uri file content checksum

file_content_md5sum

(Optional) uri file content md5sum

file_content_sha256sum

(Optional) uri file content sha256sum

file_content_sha512sum

(Optional) uri file content sha512sum

Command Mode

- /exec

show fips status

show fips status [ __readonly__ { operation_status <o_status> } { mode_state <m_state> } { TABLE_sessions <lc_num> <lc_status> } ]

Syntax Description

Syntax Description

show

Show running system information

fips

Show if FIPS mode is enabled or disabled

status

Whether FIPS mode is enabled or disabled

__readonly__

(Optional)

operation_status

(Optional) run-time information about fips

o_status

(Optional) operational status of fips

mode_state

(Optional) mode state

m_state

(Optional) fips or non-fips state

TABLE_sessions

(Optional) all lc status

lc_num

(Optional) the lc number

lc_status

(Optional) the lc status

Command Mode

- /exec

show flow cache

show flow cache [ ipv4 | ipv6 | ce ]

Syntax Description

Syntax Description

show

Show running system information

flow

Show NetFlow information

cache

Show NetFlow Exporter Cache

ipv4

(Optional) Show ipv4 cache entries

ipv6

(Optional) Show ipv6 cache entries

ce

(Optional) Show ce cache entries

Command Mode

- /exec

show flow exporter

show flow exporter [ name ] [ <exportername> ] [ __readonly__ <exporter> <description> <dest> <vrf> <vrf_id> <vrf_resolved> <dest_udp> <source_intf> <source_ip> <dscp> <exp_vers> <seqnum> <samp_table_to> <if_table_to> <stats_to> <temp_to> <rec_sent> <temp_sent> <pkts_sent> <bytes_sent> <dest_unreach> <buff_events> <pkts_drop_no_route> <pkts_drop_other> <pkts_drop_lc_rp> <pkts_drop_op_drops> <time_last_cleared> ]

Syntax Description

Syntax Description

show

Show running system information

flow

Show NetFlow information

exporter

Show NetFlow Exporter Configuration and Statistics

name

(Optional) Show a specific Flow Exporter

exportername

(Optional) Specify an exporter

__readonly__

(Optional)

exporter

(Optional)

description

(Optional)

dest

(Optional)

vrf

(Optional)

vrf_id

(Optional)

vrf_resolved

(Optional)

dest_udp

(Optional)

source_intf

(Optional)

source_ip

(Optional)

dscp

(Optional)

seqnum

(Optional)

exp_vers

(Optional)

samp_table_to

(Optional)

if_table_to

(Optional)

stats_to

(Optional)

temp_to

(Optional)

rec_sent

(Optional)

temp_sent

(Optional)

pkts_sent

(Optional)

bytes_sent

(Optional)

dest_unreach

(Optional)

buff_events

(Optional)

pkts_drop_no_route

(Optional)

pkts_drop_other

(Optional)

pkts_drop_lc_rp

(Optional)

pkts_drop_op_drops

(Optional)

time_last_cleared

(Optional)

Command Mode

- /exec

show flow glbl-pkt-cnt

show flow glbl-pkt-cnt

Syntax Description

Syntax Description

show

Show running system information

flow

Show NetFlow information

glbl-pkt-cnt

Show global packet count

Command Mode

- /exec

show flow interface

show flow interface [ <intf> ] [ __readonly__ <intf_name> <vlan_id> <v4in_mon_name> <v4in_samp_name> <v4out_mon_name> <v4out_samp_name> <v6in_mon_name> <v6in_samp_name> <v6out_mon_name> <v6out_samp_name> <l2in_mon_name> <l2in_samp_name> <l2out_mon_name> <l2out_samp_name> ]

Syntax Description

Syntax Description

show

Show running system information

flow

Show NetFlow information

interface

Flow interface information

intf

(Optional) Interface

__readonly__

(Optional)

intf_name

(Optional) Interface

vlan_id

(Optional) VLAN ID

v4in_mon_name

(Optional) IPv4 Input monitor name

v4in_samp_name

(Optional) IPv4 Input sampler name

v4out_mon_name

(Optional) IPv4 Output monitor name

v4out_samp_name

(Optional) IPv4 Output sampler name

v6in_mon_name

(Optional) IPv6 Input monitor name

v6in_samp_name

(Optional) IPv6 Input sampler name

v6out_mon_name

(Optional) IPv6 Output monitor name

v6out_samp_name

(Optional) IPv6 Output sampler name

l2in_mon_name

(Optional) l2 Input monitor name

l2in_samp_name

(Optional) l2 Input sampler name

l2out_mon_name

(Optional) l2 Output monitor name

l2out_samp_name

(Optional) l2 Output sampler name

Command Mode

- /exec

show flow internal

show flow internal { { info [ session-errors ] } | [ global ] }

Syntax Description

Syntax Description

show

Show running system information

flow

Show information about netflow

internal

Show internal nfm information

info

Show internal data structure information

session-errors

(Optional) Show Netflow session error history

global

(Optional) Display nfm global info

Command Mode

- /exec

show flow internal counter error

show flow internal counter error

Syntax Description

Syntax Description

show

Show running system information

flow

Show NetFlow information

internal

Show internal nfm information

counter

Show nfm counter

error

Show nfm info counters

Command Mode

- /exec

show flow internal counter info

show flow internal counter info

Syntax Description

Syntax Description

show

Show running system information

flow

Show NetFlow information

internal

Show internal nfm information

counter

Show nfm counter

info

Show nfm info counters

Command Mode

- /exec

show flow internal counter mts

show flow internal counter mts

Syntax Description

Syntax Description

show

Show running system information

flow

Show information about netflow

internal

Show internal nfm information

counter

Show nfm counter

mts

Counter for export msg drops

Command Mode

- /exec

show flow internal ddb db

show flow internal ddb db [ __readonly__ <ddb_log_string> ]

Syntax Description

Syntax Description

show

Show running system information

flow

Show information about netflow

internal

Show internal nfm information

ddb

DDB information

db

DDB database

__readonly__

(Optional)

ddb_log_string

(Optional)

Command Mode

- /exec

show flow internal event-history

show flow internal event-history

Syntax Description

Syntax Description

show

Show running system information

flow

Show information about netflow

internal

Show internal nfm information

event-history

Show various event logs of NFM

Command Mode

- /exec

show flow internal event-history ddb

show flow internal event-history ddb

Syntax Description

Syntax Description

show

Show running system information

flow

Show information about netflow

internal

Show internal nfm information

event-history

Show various event logs of NFM

ddb

Show various ddb logs

Command Mode

- /exec

show flow internal event-history errors

show flow internal event-history errors

Syntax Description

Syntax Description

show

Show running system information

flow

Show information about netflow

internal

Show internal nfm information

event-history

Show various event logs of NFM

errors

Show error logs of NFM

Command Mode

- /exec

show flow internal event-history events

show flow internal event-history events

Syntax Description

Syntax Description

show

Show running system information

flow

Show information about netflow

internal

Show internal nfm information

event-history

Show various event logs of NFM

events

Show various NFM events

Command Mode

- /exec

show flow internal event-history export

show flow internal event-history export

Syntax Description

Syntax Description

show

Show running system information

flow

Show information about netflow

internal

Show internal nfm information

event-history

Show various event logs of NFM

export

Show NFM export packet logs

Command Mode

- /exec

show flow internal event-history lif

show flow internal event-history lif

Syntax Description

Syntax Description

show

Show running system information

flow

Show information about netflow

internal

Show internal nfm information

event-history

Show various event logs of NFM

lif

Show NFM logical interface logs

Command Mode

- /exec

show flow internal event-history msgs

show flow internal event-history msgs

Syntax Description

Syntax Description

show

Show running system information

flow

Show information about netflow

internal

Show internal nfm information

event-history

Show various event logs of NFM

msgs

Show various message logs of NFM

Command Mode

- /exec

show flow internal event-history swcache

show flow internal event-history swcache

Syntax Description

Syntax Description

show

Show running system information

flow

Show information about netflow

internal

Show internal nfm information

event-history

Show various event logs of NFM

swcache

Show NFM software cache logs

Command Mode

- /exec

show flow internal lif status

show flow internal lif status [ __readonly__ <ifindex> <vlan_id> <num_members> <slot_number> <num_ports> ]

Syntax Description

Syntax Description

show

Show running system information

flow

Show information about netflow

internal

Show internal nfm information

lif

Logical interface

status

Download status

__readonly__

(Optional)

ifindex

(Optional) Interface

vlan_id

(Optional)

num_members

(Optional)

slot_number

(Optional)

num_ports

(Optional)

Command Mode

- /exec

show flow internal mem-stats

show flow internal mem-stats [ no-libs ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

flow

Show information about netflow

internal

Show internal nfm information

mem-stats

Show memory allocation statistics of NFM

no-libs

(Optional) Exclude libraries

detail

(Optional) Show detail memstats for NetFlow Manager

Command Mode

- /exec

show flow monitor

show flow monitor [ name ] [ <monitorname> [ cache [ detailed ] ] ] [ __readonly__ <monitor> <use_count> <description> <record> <exporter1> <exporter2> <src_addr> <dest_addr> <direction> <pkt_count> <byte_count> ]

Syntax Description

Syntax Description

show

Show running system information

flow

Show NetFlow information

monitor

Show Monitor Configuration

name

(Optional) Show a specific Flow Monitor

monitorname

(Optional) Specify a monitor

cache

(Optional) Flow monitor cache contents

detailed

(Optional) Show the entire cache contents

__readonly__

(Optional)

monitor

(Optional)

use_count

(Optional)

description

(Optional)

record

(Optional)

exporter1

(Optional)

exporter2

(Optional)

src_addr

(Optional)

dest_addr

(Optional)

direction

(Optional)

pkt_count

(Optional)

byte_count

(Optional)

Command Mode

- /exec

show flow record

show flow record [ name ] [ { <recordname> } | { netflow-original } | { netflow { protocol-port | layer2-switched { input } | { ipv4 | ipv6 | l2 } { original-input | original-output } } } ] [ __readonly__ <record> <description> <use_count> <template> ]

Syntax Description

Syntax Description

show

Show running system information

flow

Show NetFlow information

record

Show Record Configuration

name

(Optional) Show the configuration for a specific Flow Record

recordname

(Optional) Specify a record

netflow-original

(Optional) Traditional IPv4 input NetFlow with origin ASs

netflow

(Optional) Traditional NetFlow collection schemes

ipv4

(Optional) IPv4 collection schemes

ipv6

(Optional) IPv6 collection schemes

l2

(Optional) L2 collection schemes

layer2-switched

(Optional) Layer2-Switched collection schemes

original-input

(Optional) Input NetFlow

original-output

(Optional) Output NetFlow

input

(Optional) Input NetFlow

protocol-port

(Optional) Protocol and Ports aggregation scheme

__readonly__

(Optional)

record

(Optional)

description

(Optional)

use_count

(Optional)

template

(Optional)

Command Mode

- /exec

show flow sw-monitor

show flow sw-monitor [ name ] [ <monitorname> [ cache [ detailed ] ] ]

Syntax Description

Syntax Description

show

Show running system information

flow

Show NetFlow information

sw-monitor

Show Monitor Configuration

name

(Optional) Show a specific Flow Monitor

monitorname

(Optional) Specify a monitor

cache

(Optional) Flow monitor cache contents

detailed

(Optional) Show the entire cache contents

Command Mode

- /exec

show flow timeout

show flow timeout [ __readonly__ <active_to> <inactive_to> <fast_to> <th_pkts> <agg_age_to> <flush_cache_to> ]

Syntax Description

Syntax Description

show

Show running system information

flow

Show NetFlow information

timeout

Show NetFlow flow cache timeout values

__readonly__

(Optional)

active_to

(Optional)

inactive_to

(Optional)

fast_to

(Optional)

th_pkts

(Optional)

agg_age_to

(Optional)

flush_cache_to

(Optional)

Command Mode

- /exec

show forwarding adjacency

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] adjacency [ mpls ] [ lisp ] [ nve ] [ <aif> ] [ <anh> ] [ detail | stats | platform ] [ module <module> ] [ __readonly__ TABLE_adj <adj-count> <fec> <nexthop> <rewinfo> <interface> <bgp_rnh> <bgp_orig_as> <bgp_peer_as> <pkts> <bytes> <exp> <src_addr> <dest_addr> <lisp_flags> <lisp_inst_id> <pltfm_key> <hh> <refcount> ]

Syntax Description

Syntax Description

show

forwarding

display fib information

ip

(Optional) ipv4

ipv4

(Optional) ipv4

adjacency

display adjacency information

platform

(Optional) one command to show pi and pd info together

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

mpls

(Optional) mpls adjacency information

lisp

(Optional) LISP adjacency information

nve

(Optional) VxLAN tunnel adjacency information

aif

(Optional) adjacency output interface

anh

(Optional) adjacency next hop

detail

(Optional) detail

stats

(Optional) adjacency statistics

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

TABLE_adj

(Optional) Table Adjacency

adj-count

(Optional) total adj count

fec

(Optional) FEC info

nexthop

(Optional) next hop address

rewinfo

(Optional) rewrite information

interface

(Optional) output interface

bgp_rnh

(Optional) next hop address

bgp_orig_as

(Optional) bgp orig as

bgp_peer_as

(Optional) bgp peer as

exp

(Optional) exp mapping

pkts

(Optional) packet stats

bytes

(Optional) bytes stats

src_addr

(Optional) src address

dest_addr

(Optional) dest address

lisp_flags

(Optional) lisp flags

lisp_inst_id

(Optional) lisp instance id

pltfm_key

(Optional) platform key

hh

(Optional) Hardware Handle

refcount

(Optional) reference count

Command Mode

- /exec

show forwarding bypass-hardware

show forwarding bypass-hardware [ module <module> ]

Syntax Description

Syntax Description

show

forwarding

fib information

bypass-hardware

bypass hardware

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding capture

show forwarding capture [ module <module> ] [ __readonly__ <type><len><data> ]

Syntax Description

Syntax Description

show

forwarding

display fib information

capture

display capture buffer

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

Command Mode

- /exec

show forwarding dvif primary

show forwarding dvif primary

Syntax Description

Syntax Description

show

show

forwarding

forwarding

dvif

simulate dvif region role change

primary

role has become primary

Command Mode

- /exec

show forwarding dvif secondary

show forwarding dvif secondary

Syntax Description

Syntax Description

show

show

forwarding

forwarding

dvif

simulate dvif region role change

secondary

role has become secondary

Command Mode

- /exec

show forwarding ecmp

show forwarding ecmp [ { [ vrf { <vrf-name> | <vrf-known-name> } ] lisp } ] [ platform ] [ module <module> ] [ partial ] [ __readonly__ <header> <ecmp_hash> <intf> <nh> <v6nh> <hw_index> <num_mpls> <holder> <refcount> <num_paths> <sw_ptr> <ecmp_partial> ]

Syntax Description

Syntax Description

show

forwarding

Display fib information

ecmp

Show information about ECMPs

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

lisp

(Optional) Show information about LISP ECMPs

platform

(Optional) one command to show pi and pd info together

module

(Optional) slot

partial

(Optional) Show partially installed ECMPs

module

(Optional) slot number

__readonly__

(Optional)

header

(Optional) o/p header

ecmp_hash

(Optional) ecmp hash

intf

(Optional) interface

nh

(Optional) next hop

v6nh

(Optional) V6 next hop

hw_index

(Optional) Hw index

num_mpls

(Optional) No of MPLS ecmp

holder

(Optional) holder bitmap

refcount

(Optional) refcount

sw_ptr

(Optional) Software pointer

num_paths

(Optional) No of paths

ecmp_partial

(Optional) partial ecmp

Command Mode

- /exec

show forwarding ecmp recursive

show forwarding ecmp recursive [ platform ] [ max-display-count <display_count> ] [ module <module> ] [ partial ] [ __readonly__ <header> <num_pfxs> <rnh_table_id> <nh> <rnh_len> <v6nh> <hw_instance> <nh_vpn_label> <nh_weight> <cnh_intf> <ecmp_partial> ]

Syntax Description

Syntax Description

show

forwarding

Display fib information

ecmp

Show information about ECMPs

recursive

Show information about recursive ECMPs

platform

(Optional) one command to show pi and pd info together

module

(Optional) slot

partial

(Optional) Show partially installed ECMPs

module

(Optional) slot number

max-display-count

(Optional) displays max # of routes

display_count

(Optional) count

__readonly__

(Optional)

header

(Optional) o/p header

num_pfxs

(Optional) Number of prefixes using this virtual object

rnh_table_id

(Optional) The table id where the RNHs are present

nh

(Optional) Next hop info

rnh_len

(Optional) Next hop mask length

v6nh

(Optional) V6 Next hop info

hw_instance

(Optional) Hardware instance info

nh_vpn_label

(Optional) NH VPN label

nh_weight

(Optional) weighted ecmp info

cnh_intf

(Optional) cnh output interface

ecmp_partial

(Optional) partial ecmp

Command Mode

- /exec

show forwarding file-log disable

show forwarding file-log disable

Syntax Description

Syntax Description

show

show

forwarding

forwarding

file-log

logging to tmp file

disable

disable

Command Mode

- /exec

show forwarding file-log enable

show forwarding file-log enable

Syntax Description

Syntax Description

show

show

forwarding

forwarding

file-log

logging to tmp file

enable

enable

Command Mode

- /exec

show forwarding interfaces

show forwarding interfaces [ module <module> ] [ __readonly__ <intf> <v4adjcnt> <v6adjcnt> <rpfmode> <mac> ]

Syntax Description

Syntax Description

show

forwarding

fib information

interfaces

show fib interface info

__readonly__

(Optional)

intf

(Optional) interface name

module

(Optional) slot

module

(Optional) slot number

v4adjcnt

(Optional) count of v4 adjacencies

v6adjcnt

(Optional) count of v6 adjacencies

mac

(Optional) mac address

rpfmode

(Optional) uRPF mode

Command Mode

- /exec

show forwarding internal debugs

show forwarding internal debugs

Syntax Description

Syntax Description

show

forwarding

forwarding information

internal

IPFIB internal information

debugs

show debug traces

Command Mode

- /exec

show forwarding internal error counts

show forwarding internal error counts [ module <module> ] [ __readonly__ <err-str><count> ]

Syntax Description

Syntax Description

show

forwarding

display fib information

internal

internal information

error

display internal errors

counts

display error counts

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

Command Mode

- /exec

show forwarding internal errors

show forwarding internal errors

Syntax Description

Syntax Description

show

forwarding

display fib information

internal

internal information

errors

show IPFBIB error traces

Command Mode

- /exec

show forwarding internal info

show forwarding internal info

Syntax Description

Syntax Description

show

forwarding

forwarding information

internal

IPFIB internal information

info

show IPFIB data

Command Mode

- /exec

show forwarding internal ipfib debugs

show forwarding internal ipfib debugs

Syntax Description

Syntax Description

show

forwarding

forwarding information

internal

IPFIB internal information

ipfib

ipfib

debugs

show debug traces

Command Mode

- /exec

show forwarding internal l2mcast debugs

show forwarding internal l2mcast debugs

Syntax Description

Syntax Description

show

forwarding

forwarding information

internal

l2mcast internal information

l2mcast

l2 multicast

debugs

show debug traces

Command Mode

- /exec

show forwarding internal l2vpn counters

show forwarding internal l2vpn counters [ clear ] [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

l2vpn

l2vpn forwarding

counters

counters

clear

(Optional) clear

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal l2vpn trace member-config

show forwarding internal l2vpn trace member-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

bintrace information

l2vpn

L2VPN

member-config

member bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal l2vpn trace member-history

show forwarding internal l2vpn trace member-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

l2vpn

L2VPN

trace

internal trace

member-history

member history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal l3 issu pss adjacency

show forwarding internal l3 issu pss adjacency

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

l3

l3 forwarding

issu

ISSU service

pss

persistant storage

adjacency

adjacency info

Command Mode

- /exec

show forwarding internal l3 issu pss ecmp

show forwarding internal l3 issu pss ecmp

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

l3

l3 forwarding

issu

ISSU service

pss

persistant storage

ecmp

ecmp info

Command Mode

- /exec

show forwarding internal l3 issu pss prefix

show forwarding internal l3 issu pss prefix

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

l3

l3 forwarding

issu

ISSU service

pss

persistant storage

prefix

vobj info

Command Mode

- /exec

show forwarding internal l3 issu pss vobj

show forwarding internal l3 issu pss vobj

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

l3

l3 forwarding

issu

ISSU service

pss

persistant storage

vobj

vobj info

Command Mode

- /exec

show forwarding internal mem-stats

show forwarding internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

forwarding

forwarding information

internal

IPFIB internal information

mem-stats

show memory allocation stats for IPFIB

detail

(Optional) show detail memstats for IPFIB

Command Mode

- /exec

show forwarding internal message counts

show forwarding internal message counts [ module <module> ] [ __readonly__ <msg-str><count> ]

Syntax Description

Syntax Description

show

forwarding

display fib information

internal

internal information

message

display internal message counts

counts

display internal message counts

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

Command Mode

- /exec

show forwarding internal mpls counters

show forwarding internal mpls counters [ clear ] [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

mpls

mpls forwarding

counters

counters

clear

(Optional) clear

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal mpls debugs

show forwarding internal mpls debugs

Syntax Description

Syntax Description

show

forwarding

forwarding information

internal

IPFIB internal information

mpls

mpls lfib information

debugs

show debug traces

Command Mode

- /exec

show forwarding internal mpls issu pss adjacency

show forwarding internal mpls issu pss adjacency

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

mpls

mpls forwarding

issu

ISSU service

pss

persistant storage

adjacency

adjacency info

Command Mode

- /exec

show forwarding internal mpls issu pss ecmp

show forwarding internal mpls issu pss ecmp

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

mpls

mpls forwarding

issu

ISSU service

pss

persistant storage

ecmp

ecmp info

Command Mode

- /exec

show forwarding internal mpls issu pss label

show forwarding internal mpls issu pss label

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

mpls

mpls forwarding

issu

ISSU service

pss

persistant storage

label

label info

Command Mode

- /exec

show forwarding internal mpls trace adj-config

show forwarding internal mpls trace adj-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

mpls

mpls forwarding

trace

internal trace

adj-config

bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal mpls trace adj-history

show forwarding internal mpls trace adj-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

mpls

mpls forwarding

trace

internal trace

adj-history

adj-history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal mpls trace ecmp-config

show forwarding internal mpls trace ecmp-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

mpls

mpls forwarding

trace

internal trace

ecmp-config

ECMP bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal mpls trace ecmp-history

show forwarding internal mpls trace ecmp-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

mpls

mpls forwarding

trace

internal trace

ecmp-history

ECMP history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal mpls trace label-config

show forwarding internal mpls trace label-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

mpls

mpls

trace

internal trace

label-config

label bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal mpls trace label-history

show forwarding internal mpls trace label-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

mpls

mpls

trace

internal trace

label-history

label history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal mpls trace te-config

show forwarding internal mpls trace te-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

mpls

mpls forwarding

trace

internal trace

te-config

TE bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal mpls trace te-history

show forwarding internal mpls trace te-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

mpls

mpls forwarding

trace

internal trace

te-history

te-history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal msgs

show forwarding internal msgs

Syntax Description

Syntax Description

show

forwarding

forwarding information

internal

IPFIB internal information

msgs

show IPFIB mts messages

Command Mode

- /exec

show forwarding internal multicast counts

show forwarding internal multicast counts [ module <module> vdc <vdc_id> ] [ __readonly__ <err-str><count> ]

Syntax Description

Syntax Description

show

forwarding

display fib information

internal

internal information

multicast

multicast counters

counts

display counts

module

(Optional) slot

module

(Optional) slot number

vdc

(Optional) vdc id

vdc_id

(Optional) vdc id

__readonly__

(Optional)

Command Mode

- /exec

show forwarding internal multicast counts clear

show forwarding internal multicast counts clear [ module <module> vdc <vdc_id> ]

Syntax Description

Syntax Description

show

forwarding

display fib information

internal

internal information

multicast

multicast counters

counts

display counts

clear

clear mfib counts

module

(Optional) slot

module

(Optional) slot number

vdc

(Optional) vdc id

vdc_id

(Optional) vdc id

Command Mode

- /exec

show forwarding internal multicast debugs

show forwarding internal multicast debugs

Syntax Description

Syntax Description

show

forwarding

forwarding information

internal

IPFIB internal information

multicast

multicast

debugs

show debug traces

Command Mode

- /exec

show forwarding internal multicast pd debugs

show forwarding internal multicast pd debugs

Syntax Description

Syntax Description

show

forwarding

forwarding information

internal

IPFIB internal information

multicast

multicast

pd

pd

debugs

show debug traces

Command Mode

- /exec

show forwarding internal nve counters

{ show | clear } forwarding internal nve counters { peer { <ipv4> | all } }

Syntax Description

Syntax Description

show

Show running system information

clear

Reset functions

forwarding

Forwarding information

internal

internal information

nve

NVE interface related

all

All peers

counters

Show NVE counters

peer

Show NVE peer counters

ipv4

NVE peer address

Command Mode

- /exec

show forwarding internal nve ir-peer

show forwarding internal nve ir-peer

Syntax Description

Syntax Description

show

Show running system information

forwarding

Forwarding information

internal

internal information

nve

NVE interface related

ir-peer

Show NVE ir peer info

Command Mode

- /exec

show forwarding internal nve res-pathlist

show forwarding internal nve res-pathlist

Syntax Description

Syntax Description

show

Show running system information

forwarding

Forwarding information

internal

internal information

nve

NVE interface related

res-pathlist

Show NVE EVPN ES resultant pathlist info

Command Mode

- /exec

show forwarding internal pss disable

show forwarding internal pss disable

Syntax Description

Syntax Description

show

forwarding

display fib information

internal

internal information

pss

display info from pss

disable

disable

Command Mode

- /exec

show forwarding internal pss enable

show forwarding internal pss enable

Syntax Description

Syntax Description

show

forwarding

display fib information

internal

internal information

pss

display info from pss

enable

enable

Command Mode

- /exec

show forwarding internal received nexthops

show forwarding internal received nexthops [ module <module> ]

Syntax Description

Syntax Description

show

forwarding

display fib information

internal

internal information

received

BGP learnt

nexthops

Nexthops

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace-profile debugs

show forwarding internal trace-profile debugs

Syntax Description

Syntax Description

show

forwarding

forwarding information

internal

IPFIB internal information

trace-profile

Trace Profile

debugs

show debug traces

Command Mode

- /exec

show forwarding internal trace bt-queue

show forwarding internal trace bt-queue { v4-pfx | v6-pfx | v4-adj | v6-adj | v4-rnh | v6-rnh | vobj | labels | ecmp | mpls-ecmp | mpls-adj | te | otv-adj | otv-vlan | all } + [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

bt-queue

bintrace queue

v4-pfx

v4-pfx

v6-pfx

v6-pfx

v4-adj

v4-adj

v6-adj

v6-adj

v4-rnh

v4-rnh

v6-rnh

v6-rnh

vobj

virtual object

labels

labels

ecmp

ecmp

mpls-ecmp

mpls-ecmp

mpls-adj

mpls-adj

te

te

otv-adj

otv-adj

otv-vlan

otv-vlan

all

Display information for all queues

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace ecmp-config

show forwarding internal trace ecmp-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

ecmp-config

ECMP bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace ecmp-history

show forwarding internal trace ecmp-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

ecmp-history

ECMP history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace evpn-ecmp-history

show forwarding internal trace evpn-ecmp-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

evpn-ecmp-history

EVPN ECMP history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace mfib oif-config

show forwarding internal trace mfib oif-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

bintrace information

mfib

mfib information

oif-config

oif bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace mfib oif-history

show forwarding internal trace mfib oif-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

bintrace information

mfib

mfib information

oif-history

oif history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace mfib oiflist-config

show forwarding internal trace mfib oiflist-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

bintrace information

mfib

mfib information

oiflist-config

oiflist bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace mfib oiflist-history

show forwarding internal trace mfib oiflist-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

bintrace information

mfib

mfib information

oiflist-history

oiflist history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace mfib otv oif-config

show forwarding internal trace mfib otv oif-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

bintrace information

mfib

mfib information

otv

otv information

oif-config

oif bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace mfib otv oif-history

show forwarding internal trace mfib otv oif-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

bintrace information

mfib

mfib information

otv

otv information

oif-history

oif history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace mfib otv oiflist-history

show forwarding internal trace mfib otv oiflist-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

bintrace information

mfib

mfib information

otv

otv information

oiflist-history

oiflist history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace mfib otv oiflist-config

show forwarding internal trace mfib otv oiflist-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

bintrace information

mfib

mfib information

otv

otv information

oiflist-config

oiflist bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace mfib otv v4-route-history

show forwarding internal trace mfib otv v4-route-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

bintrace information

mfib

mfib information

otv

otv route history

v4-route-history

otv v4 route history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace mfib otv v4-route-config

show forwarding internal trace mfib otv v4-route-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

bintrace information

mfib

mfib information

otv

otv route configuration

v4-route-config

otv v4 route bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace mfib otv v6-route-history

show forwarding internal trace mfib otv v6-route-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

bintrace information

mfib

mfib information

otv

otv route history

v6-route-history

otv v6 route history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace mfib otv v6-route-config

show forwarding internal trace mfib otv v6-route-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

bintrace information

mfib

mfib information

otv

otv route configuration

v6-route-config

otv v6 route bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace mfib platform oiflist-history

show forwarding internal trace mfib platform oiflist-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

mfib

mfib information

platform

platform information

oiflist-history

oiflist history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace mfib platform oiflist-config

show forwarding internal trace mfib platform oiflist-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

mfib

mfib information

platform

platform information

oiflist-config

oiflist bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace mfib v4-route-config

show forwarding internal trace mfib v4-route-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

bintrace information

mfib

mfib information

v4-route-config

V4 route bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace mfib v4-route-history

show forwarding internal trace mfib v4-route-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

bintrace information

mfib

mfib information

v4-route-history

v4 route history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace mfib v6-route-config

show forwarding internal trace mfib v6-route-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

bintrace information

mfib

mfib information

v6-route-config

V6 route bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace mfib v6-route-history

show forwarding internal trace mfib v6-route-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

bintrace information

mfib

mfib information

v6-route-history

v6 route history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace nve-ir-peer-history

show forwarding internal trace nve-ir-peer-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

nve-ir-peer-history

NVE ir-peer history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace nve-l3-vni-history

show forwarding internal trace nve-l3-vni-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

nve-l3-vni-history

NVE L3 VNI history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace nve-peer-history

show forwarding internal trace nve-peer-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

nve-peer-history

NVE peer history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace otv-adj-config

show forwarding internal trace otv-adj-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

otv-adj-config

OTV adjacency bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace otv-adj-history

show forwarding internal trace otv-adj-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

otv-adj-history

OTV adjacency history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace otv-vlan-config

show forwarding internal trace otv-vlan-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

otv-vlan-config

OTV vlan bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace otv-vlan-history

show forwarding internal trace otv-vlan-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

otv-vlan-history

OTV vlan history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace v4-adj-config

show forwarding internal trace v4-adj-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

v4-adj-config

V4 adjacency bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace v4-adj-history

show forwarding internal trace v4-adj-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

v4-adj-history

V4 adjacency history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace v4-pfx-config

show forwarding internal trace v4-pfx-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

v4-pfx-config

V4 prefix bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace v4-pfx-history

show forwarding internal trace v4-pfx-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

v4-pfx-history

V4 prefix history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace v4-rnh-config

show forwarding internal trace v4-rnh-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

v4-rnh-config

V4 rnh bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace v4-rnh-history

show forwarding internal trace v4-rnh-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

v4-rnh-history

V4 rnh history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace v6-adj-config

show forwarding internal trace v6-adj-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

v6-adj-config

V6 adjacency bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace v6-adj-history

show forwarding internal trace v6-adj-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

v6-adj-history

V6 adjacency history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace v6-pfx-config

show forwarding internal trace v6-pfx-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

v6-pfx-config

V6 prefix bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace v6-pfx-history

show forwarding internal trace v6-pfx-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

v6-pfx-history

V6 prefix history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace v6-rnh-config

show forwarding internal trace v6-rnh-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

v6-rnh-config

V6 rnh bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace v6-rnh-history

show forwarding internal trace v6-rnh-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

v6-rnh-history

V6 rnh history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace vobj-config

show forwarding internal trace vobj-config [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

vobj-config

vobj bintrace configuration

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal trace vobj-history

show forwarding internal trace vobj-history [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

internal

internal information

trace

internal trace

vobj-history

vobj history

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding internal tracing disable

show forwarding internal tracing disable

Syntax Description

Syntax Description

show

forwarding

display fib information

internal

internal information

tracing

tracing

disable

disable

Command Mode

- /exec

show forwarding internal tracing enable

show forwarding internal tracing enable

Syntax Description

Syntax Description

show

forwarding

display fib information

internal

internal information

tracing

tracing

enable

enable

Command Mode

- /exec

show forwarding internal ufib funcstats disable

show forwarding internal ufib funcstats disable

Syntax Description

Syntax Description

show

forwarding

display fib information

internal

internal information

ufib

ufib

funcstats

function statistics

disable

disable

Command Mode

- /exec

show forwarding internal ufib funcstats enable

show forwarding internal ufib funcstats enable

Syntax Description

Syntax Description

show

forwarding

display fib information

internal

internal information

ufib

ufib

funcstats

function statistics

enable

enable

Command Mode

- /exec

show forwarding internal unicast consistency-checker

show forwarding internal unicast consistency-checker

Syntax Description

Syntax Description

show

forwarding

forwarding information

internal

IPFIB internal information

unicast

unicast

consistency-checker

consistency checker debugs

Command Mode

- /exec

show forwarding internal unicast counts

show forwarding internal unicast counts [ detail ] [ vdc { <vdc_id> | all } ] [ module <module> ] [ __readonly__ <err-str><count> ]

Syntax Description

Syntax Description

show

forwarding

display fib information

internal

internal information

unicast

unicast counters

counts

display non-zero counts

detail

(Optional) display all counts

module

(Optional) slot

module

(Optional) slot number

vdc

(Optional) vdc id

vdc_id

(Optional) vdc id

all

(Optional) all VDCs active on the module

__readonly__

(Optional)

Command Mode

- /exec

show forwarding internal unicast debugs

show forwarding internal unicast debugs

Syntax Description

Syntax Description

show

forwarding

forwarding information

internal

IPFIB internal information

unicast

unicast

debugs

show debug traces

Command Mode

- /exec

show forwarding internal unicast ha

show forwarding internal unicast ha

Syntax Description

Syntax Description

show

forwarding

forwarding information

internal

IPFIB internal information

unicast

unicast

ha

HA debugs

Command Mode

- /exec

show forwarding ipv6 adjacency

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 adjacency [ mpls ] [ <aif> ] [ <anh> ] [ detail | stats | platform ] [ module <module> ] [ __readonly__ TABLE_adj <adj-count> <fec> <nexthop> <rewinfo> <interface> <pkts> <bytes> <bgp_rnh> <bgp_orig_as> <bgp_peer_as> <hh> <refcount> ]

Syntax Description

Syntax Description

show

forwarding

display fib information

ipv6

ipv6

adjacency

display adjacency information

platform

(Optional) one command to show pi and pd info together

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

mpls

(Optional) mpls adjacency information

aif

(Optional) adjacency output interface

detail

(Optional) detail

stats

(Optional) adjacency statistics

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

TABLE_adj

(Optional) Table Adjacency

adj-count

(Optional) total adj count

fec

(Optional) FEC info

nexthop

(Optional) next hop address

rewinfo

(Optional) rewrite information

interface

(Optional) output interface

pkts

(Optional) packet stats

bytes

(Optional) bytes stats

bgp_rnh

(Optional) next hop address

bgp_orig_as

(Optional) bgp orig as

bgp_peer_as

(Optional) bgp peer as

hh

(Optional) Hardware Handle

refcount

(Optional) reference count

Command Mode

- /exec

show forwarding ipv6 multicast route

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | all } | table <tab_id> ] ipv6 multicast route { [ group { <group> | <group_addr> } | source { <source> | <source_addr> } | module <module> | vrf { <vrf-name> | all } ] + | summary [ module <module> | vrf { <vrf-name> | <vrf-known-name> | all } ] + } [ __readonly__ <table_type> <num_routes> <num_starg_routes> <num_sg_routes> <num_gprefix_routes> <num_prefix_insert_fail> <num_groups> <num_sources> <src_len> <grp_len> <df_ordinal> <rpfif> <address> <flag> <route_pkts> <route_bytes> ]

Syntax Description

Syntax Description

show

forwarding

display fib information

ipv6

ipv6

multicast

IPV6 related Multicast information

route

Multicast route information

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

table

(Optional) display info per vpn-id

tab_id

(Optional) table number

group

(Optional) Multicast IPv6 Group Address

source

(Optional) Multicast IPv6 Source Address

summary

display route counts

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

table_type

(Optional) Table Type

num_routes

(Optional) Number of routes

num_starg_routes

(Optional) Number of (*,G) routes

num_sg_routes

(Optional) Number of (S,G) routes

num_gprefix_routes

(Optional) Number of (*,G-prefix) routes

num_prefix_insert_fail

(Optional) Prefix insert fail count

num_groups

(Optional) Number of group entries in the table

num_sources

(Optional) Number of (S, G) entries for the group address

address

(Optional) Ipv6 address string

src_len

(Optional) Source Address Mask

grp_len

(Optional) Group address Mask

df_ordinal

(Optional) DF ordinal

rpfif

(Optional) RPF interface

flag

(Optional) Route type flag

route_pkts

(Optional) Route packet count

route_bytes

(Optional) Route bytes

Command Mode

- /exec

show forwarding ipv6 pss route

show forwarding [ vrf { <vrf-name> | <vrf-known-name> } | table <table_id> ] ipv6 pss route [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

forwarding

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

table

(Optional) display info per vpn-id

table_id

(Optional) table number

ipv6

ipv6

pss

display info from pss

route

route

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding ipv6 route

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] ipv6 { route | rnhdb } [ recursive ] [ detail | summary | platform | partial | <prefix> [ longer-prefixes ] [ detail | platform ] | <address> [ detail | platform ] | interface <interface> | next-hop <nh> | attached | unresolved | adjacency { <aif> <anh> | drop | glean | punt } ] [ max-display-count <display_count> ] [ module <module> | vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] + [ __readonly__ TABLE_vrf <vrfname> <tblname> <prefix_count> TABLE_prefix <pfx> TABLE_path [ <nexthop> | <special> ] <intf> <route_count> <path_count> <mask_length> <routes_per_mask> ]

Syntax Description

Syntax Description

show

forwarding

display fib information

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

table

(Optional) display info per vpn-id

table_id

(Optional) table id in hex

ipv6

ipv6

route

display IP routing table

platform

(Optional) one command to show pi and pd info together

rnhdb

rnhdb

recursive

(Optional) display routes with recursive next hops

detail

(Optional) show detailed information about the routes

summary

(Optional) display route counts

partial

(Optional) display routes with partial ECMPs

longer-prefixes

(Optional) display longer prefixes

interface

(Optional) display routes with this output i/f only

interface

(Optional) output interface

next-hop

(Optional) display routes with this next-hop only

attached

(Optional) display directly connected routes

unresolved

(Optional) display unresolved routes

adjacency

(Optional) display routes via specified adjacency

aif

(Optional) adjacency output interface

drop

(Optional) display routes via drop adjacency

glean

(Optional) display routes via glean adjacency

punt

(Optional) display routes via punt adjacency

module

(Optional) slot

module

(Optional) slot number

max-display-count

(Optional) displays max # of routes

display_count

(Optional) count

__readonly__

(Optional)

TABLE_vrf

(Optional) vrf table

vrfname

(Optional) VRF name

tblname

(Optional) table name

prefix_count

(Optional) total number of prefix in VRF

TABLE_prefix

(Optional) all xml prefix entries

pfx

(Optional) ipv6 prefix

TABLE_path

(Optional) path table

nexthop

(Optional) next hop address

special

(Optional) special adjacencies

intf

(Optional) output interface

route_count

(Optional) total number of routes in VRF

path_count

(Optional) total number of paths in VRF

mask_length

(Optional) length of mask

routes_per_mask

(Optional)

Command Mode

- /exec

show forwarding kvfib cache on

show forwarding kvfib cache { on | off }

Syntax Description

Syntax Description

show

forwarding

fib information

kvfib

kvfib

cache

cache

on

set variable

off

reset variable

Command Mode

- /exec

show forwarding l2 multicast

show forwarding l2 multicast { [ { vlan <vlan-id> [ { group <grpaddr> source <srcaddr> } | destination-mac <dstmac> ] } ] } [ vdc <vdc-id> ] [ module <num> ] [ __readonly__ <epoch> <resource_id> <dest_index> <hw_handle> <dmac> <text> <value> ]

Syntax Description

Syntax Description

show

Show running system information

forwarding

Forwarding information

l2

L2 related information

multicast

Multicast related information

vlan

(Optional) Information Specific to a Vlan

vlan-id

(Optional) Vlan id value

group

(Optional) (S,G) specific information

grpaddr

(Optional) Group address

source

(Optional) source specific information

srcaddr

(Optional) Source address

destination-mac

(Optional) Destination MAC address

dstmac

(Optional) Ethernet MAC address

vdc

(Optional) VDC

vdc-id

(Optional) VDC id

module

(Optional) Slot

num

(Optional) Slot number

__readonly__

(Optional)

resource_id

(Optional) Resource Identifier

dest_index

(Optional) Destination Index Identifier

epoch

(Optional) Epoch number

hw_handle

(Optional) Hardware Handle

dmac

(Optional) Destination MAC address

text

(Optional) String

value

(Optional) Value

Command Mode

- /exec

show forwarding l2vpn ipv6 multicast route

show forwarding l2vpn ipv6 multicast route [ [ vlan <vlan-id> ] | [ softwarebd <software-bd> ] ] [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

forwarding

l2vpn

Layer 2 VPN

ipv6

ipv6

multicast

Multicast IPv6 information

route

Mcast route information

vlan

(Optional) vlan

softwarebd

(Optional) Software Bridge Domain

vlan-id

(Optional) vlan id

software-bd

(Optional) Software bd

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding l2vpn label vpls

show forwarding l2vpn label [ <label_id> ] vpls [ module module ] [ __readonly__ <label_id> ]

Syntax Description

Syntax Description

show

show

forwarding

forwarding

l2vpn

l2vpn forwarding

label

VC label

label_id

(Optional) VC label

vpls

VPLS

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

label_id

(Optional) Label ID

Command Mode

- /exec

show forwarding l2vpn label xconnect

show forwarding l2vpn label [ <label_id> ] xconnect [ module module ] [ __readonly__ <label_id> ]

Syntax Description

Syntax Description

show

show

forwarding

forwarding

l2vpn

l2vpn forwarding

label

VC label

label_id

(Optional) VC label

xconnect

xconnect or VPWS

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

label_id

(Optional) Label ID

Command Mode

- /exec

show forwarding l2vpn multicast outgoing-interface-list

show forwarding l2vpn multicast outgoing-interface-list [ index <oiflist-index> ]

Syntax Description

Syntax Description

show

forwarding

Forwarding information

l2vpn

Layer 2 VPN

multicast

Multicast IPv4 information

outgoing-interface-list

show outgoing interface list info

index

(Optional) oiflist index

oiflist-index

(Optional) oiflist-index

Command Mode

- /exec

show forwarding l2vpn multicast route

show forwarding l2vpn multicast route [ [ vlan <vlan-id> ] | [ softwarebd <software-bd> ] ] [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

forwarding

l2vpn

Layer 2 VPN

multicast

Multicast IPv4 information

route

Mcast route information

vlan

(Optional) vlan

softwarebd

(Optional) Software Bridge Domain

vlan-id

(Optional) vlan id

software-bd

(Optional) Software bd

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding l2vpn service vpls

show forwarding l2vpn service vpls { { service_id { <service_id> | all } } | { vlan { <vlan_id> | vlan_all } } | { peer { { interface <intf-name> | next-hop <addr> | peer_all } } } } [ module <module> ] [ detail ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

l2vpn

l2vpn forwarding

service

Services

vpls

Vpls

service_id

Specifies a service_id

service_id

service ID

all

all VPLS services

vlan

VLAN info

vlan_id

VLAN number

vlan_all

all VPLS services

peer

define the peer

peer_all

all peers

interface

PW interface for peer

intf-name

interface name

next-hop

Next hop to reach the peer

addr

IP address

module

(Optional) slot

module

(Optional) slot number

detail

(Optional) Display detailed information

Command Mode

- /exec

show forwarding l2vpn service xconnect

show forwarding l2vpn service xconnect { service_id { <service_id> | all } } [ module <module> ] [ detail ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

l2vpn

l2vpn forwarding

service

Services

xconnect

xconnect or VPWS

service_id

Specify a service_id in hex

service_id

service ID

all

All service-id will be displayed

module

(Optional) slot

module

(Optional) slot number

detail

(Optional) Display detailed information

Command Mode

- /exec

show forwarding l2vpn vlan

show forwarding l2vpn vlan [ <vlan_id> ] [ module <module> ] [ __readonly__ <vlan> ]

Syntax Description

Syntax Description

show

show

forwarding

forwarding

l2vpn

l2vpn forwarding

vlan

vlan

vlan_id

(Optional) vlan id

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

vlan

(Optional) vlan

Command Mode

- /exec

show forwarding mpls

show forwarding mpls [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } [ label <label-id> | <prefix> | <v6prefix> ] | table <table_id> [ label <label-id> | <prefix> | <v6prefix> ] | label-space <label-space-id> | label <label-id> | <prefix> | <v6prefix> ] [ stats ] [ module <module> ] [ implicit ] [ platform ] [ __readonly__ { TABLE_mpls <label> <in-pkts> <in-bytes> <out-pkts> <out-bytes> TABLE_label_nh [ <out-table-id> <fec> <out-ip> <out-intf> <out-op> <out-label> <hh> <ref-count> ] } ]

Syntax Description

Syntax Description

show

show

forwarding

forwarding

mpls

mpls forwarding

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known vrf name

vrf-all

(Optional) Display information for all VRFs

table

(Optional) display info per vpn-id

table_id

(Optional) table number

label-space

(Optional) label space

label-space-id

(Optional) label space id

label

(Optional) mpls labels

label-id

(Optional) mpls label value

prefix

(Optional) Labels for single exact match route

module

(Optional) slot

module

(Optional) slot number

stats

(Optional) Label Statistics

implicit

(Optional) Display implicit label

platform

(Optional) Display platform information

__readonly__

(Optional)

TABLE_mpls

(Optional)

label

(Optional) mpls label value

TABLE_label_nh

(Optional)

out-table-id

(Optional) Output table-id

fec

(Optional) Prefix/Tunnel ID

out-ip

(Optional) Output Next Hop

out-intf

(Optional) Output Interface

out-op

(Optional) Output Label op

out-label

(Optional) Output Label

hh

(Optional) Hardware Handle

ref-count

(Optional) Ref Count

in-pkts

(Optional) Label Input Packet Stats

in-bytes

(Optional) Label Input Bytes Stats

out-pkts

(Optional) Label Output Packet Stats

out-bytes

(Optional) Label Output Bytes Stats

Command Mode

- /exec

show forwarding mpls aggregate

show forwarding mpls aggregate [ label { <label-id> | all } ] [ detail ] [ module <module> ] [ __readonly__ [ { TABLE_label_info <label> <id> [ <sw_index> ] } ] ]

Syntax Description

Syntax Description

show

forwarding

display fib information

mpls

mpls forwaring

aggregate

aggregate label

label

(Optional) label

label-id

(Optional) label-id

all

(Optional) all

detail

(Optional) detail

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

TABLE_label_info

(Optional)

label

(Optional)

id

(Optional)

sw_index

(Optional)

Command Mode

- /exec

show forwarding mpls cbts

show forwarding mpls cbts [ module <module> ] [ __readonly__ [ { TABLE_cbts <label> [ <out-intf> ] [ <out-table-id> ] [ <out-ip> ] [ <out-op> ] } ] ]

Syntax Description

Syntax Description

show

show

forwarding

forwarding

mpls

mpls forwaring

cbts

cbts labels

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

TABLE_cbts

(Optional)

label

(Optional) mpls label value

out-intf

(Optional) Output Interface

out-table-id

(Optional) Output table-id

out-ip

(Optional) Output Next Hop

out-op

(Optional) Output Label op

Command Mode

- /exec

show forwarding mpls drop-stats

show forwarding mpls drop-stats [ platform | label0-fwd-stats ] [ __readonly__ <pkts> <bytes> ]

Syntax Description

Syntax Description

show

show

forwarding

forwarding

mpls

mpls forwarding

drop-stats

MPLS dropped packets

platform

(Optional) command to display stats per chip

label0-fwd-stats

(Optional) command to display stats for label0

__readonly__

(Optional)

pkts

(Optional) Label Packet Stats

bytes

(Optional) Label Bytes Stats

Command Mode

- /exec

show forwarding mpls ecmp

show forwarding mpls ecmp [ module <module> ] [ platform ] [ __readonly__ [ { TABLE_ecmp <type> <num_paths> <ip_paths> <mpls_paths> <ecmp_hash> <holder> <refcount> <hw_index> [ { TABLE_ecmp_paths <out-intf> <out-ip> <label_info> } ] } ] ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

mpls

mpls forwarding

ecmp

mpls ecmps

module

(Optional) slot

module

(Optional) slot number

platform

(Optional) show pd info

__readonly__

(Optional)

TABLE_ecmp

(Optional)

type

(Optional) ecmp type

num_paths

(Optional) No of paths

ip_paths

(Optional) No of ip paths

mpls_paths

(Optional) No of mpls paths

ecmp_hash

(Optional) ecmp hash

holder

(Optional) holder bitmap

refcount

(Optional) refcount

hw_index

(Optional) Hw index

TABLE_ecmp_paths

(Optional)

label_info

(Optional) rew info

out-intf

(Optional) Output Interface

out-ip

(Optional) Output Next Hop

Command Mode

- /exec

show forwarding mpls summary

show forwarding mpls summary [ module <module> ] [ __readonly__ [ { TABLE_labels <space> <count> } <total_deagg_labels> ] ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

mpls

mpls forwarding

summary

summary

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

TABLE_labels

(Optional)

space

(Optional) label space

count

(Optional) number of labels

total_deagg_labels

(Optional) total deagg labels

Command Mode

- /exec

show forwarding mpls te

show forwarding mpls te [ <te_if> ] [ detail ] [ module <module> ] [ __readonly__ { TABLE_te <id> [ <midpoint_source> ] [ <dest> ] [ <tunnel_id> ] [ <ext_tunnel_id> ] [ <lisp_id> ] [ <adjacency> ] [ <hh> ] [ <lfib_adj> ] [ <adj_refcount> ] [ <obj_refcount> ] [ <te_state> ] [ <next_hop> ] [ <next_if_index> ] [ <op_label> ] [ <backup_tunnel> ] [ <adj_key_id> ] [ <frr_label> ] [ <local_label> ] [ <adj_count> ] [ <type> ] [ <out_if> ] [ <out_lbl> ] [ <backup_if> ] [ <backup_lbl> ] } ]

Syntax Description

Syntax Description

show

forwarding

display fib information

mpls

mpls forwarding

te

Traffic Engineering

detail

(Optional) detail

module

(Optional) slot

te_if

(Optional) tunnel-te number

module

(Optional) slot number

__readonly__

(Optional)

TABLE_te

(Optional)

id

(Optional) headend if index

midpoint_source

(Optional)

dest

(Optional)

tunnel_id

(Optional)

ext_tunnel_id

(Optional)

lisp_id

(Optional)

adjacency

(Optional)

hh

(Optional) HH

lfib_adj

(Optional) lfib adjavency is drop

adj_refcount

(Optional)

obj_refcount

(Optional)

te_state

(Optional)

next_hop

(Optional)

next_if_index

(Optional)

op_label

(Optional)

backup_tunnel

(Optional)

adj_key_id

(Optional)

frr_label

(Optional)

local_label

(Optional)

adj_count

(Optional) te related adj count

type

(Optional)

out_if

(Optional)

out_lbl

(Optional)

backup_if

(Optional)

backup_lbl

(Optional)

Command Mode

- /exec

show forwarding multicast outgoing-interface-list L2

show forwarding multicast outgoing-interface-list { L2 | L3 } [ platform ] [ module <module> ] [ <index> ] [ __readonly__ <refcount> <num_oif> <intf> <encap_id> ]

Syntax Description

Syntax Description

show

forwarding

Forwarding information

multicast

Multicast IPv4 information

outgoing-interface-list

show outgoing interface list info

L2

Layer 2 oiflist

L3

Layer 3 oiflist

platform

(Optional) Display PI/PD

module

(Optional) slot

module

(Optional) slot number

index

(Optional) Outgoing Interface List Index

__readonly__

(Optional)

refcount

(Optional) Reference count

num_oif

(Optional) Number of outgoing interfaces

intf

(Optional) OIF name

encap_id

(Optional) encap_id

Command Mode

- /exec

show forwarding multicast route

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | all } | table <table_id> ] [ ip | ipv4 ] multicast route [ platform ] { [ group { <gaddr> [ <mask> ] | <gprefix> } | source { <saddr> [ <smask> ] | <sprefix> } | module <module> | vrf { <vrf-name> | <vrf-known-name> | all } ] + | summary [ module <module> | vrf { <vrf-name> | <vrf-known-name> | all } ] + } [ __readonly__ <table_type> <vrfname> <num_routes> <num_starg_routes> <num_sg_routes> <num_gprefix_routes> <num_prefix_insert_fail> <num_groups> <num_sources> <src_len> <grp_len> <df_ordinal> <rpfif> <rpf_ifindex> <flag> <flag_value> <route_pkts> <route_bytes> <oiflist_id> <platform_id> <oif_count> <refcount> <oifname> <oifindex> <oif_pkts> <oif_bytes> ]

Syntax Description

Syntax Description

show

forwarding

Forwarding information

ip

(Optional) ipv4

ipv4

(Optional) ipv4

multicast

Multicast IPv4 information

route

Mcast route information

platform

(Optional) Platform Details

table

(Optional) display info per vpn-id

table_id

(Optional) table number

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

group

(Optional) Multicast IPv4 Group specific info

gaddr

(Optional) Multicast IPv4 Group Address

mask

(Optional) Multicast IPv4 Group Address mask

gprefix

(Optional) Multicast IPv4 Group Prefix

source

(Optional) Multicast IPv4 Source specific info

saddr

(Optional) Multicast IPv4 Source Address

smask

(Optional) Multicast IPv4 Source Address mask

sprefix

(Optional) Multicast IPv4 Source Prefix

summary

display route counts

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

table_type

(Optional) Table Type

vrfname

(Optional) VRF name

num_routes

(Optional) Number of routes

num_starg_routes

(Optional) Number of (*,G) routes

num_sg_routes

(Optional) Number of (S,G) routes

num_gprefix_routes

(Optional) Number of (*,G-prefix) routes

num_prefix_insert_fail

(Optional) Prefix insert fail count

num_groups

(Optional) Number of group entries in the table

num_sources

(Optional) Number of (S, G) entries for the group address

src_len

(Optional) Source Address Mask

grp_len

(Optional) Group address Mask

df_ordinal

(Optional) DF ordinal

rpfif

(Optional) RPF interface

rpf_ifindex

(Optional) RPF Interface ifIndex

flag

(Optional) Route type flag

flag_value

(Optional) hex value of route flag

route_pkts

(Optional) Route packet count

route_bytes

(Optional) Route bytes

oiflist_id

(Optional) OIF list Identifier

platform_id

(Optional) Platform-index

oif_count

(Optional) Number of OIFs

refcount

(Optional) OIF list Reference Count

oifname

(Optional) OIF Interface name

oifindex

(Optional) OIF Interface ifIndex

oif_pkts

(Optional) OIF packets

oif_bytes

(Optional) OIF bytes

Command Mode

- /exec

show forwarding nve l2 ingress-replication-peers

show forwarding nve l2 ingress-replication-peers [ <peer_ip> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

nve

nve related info

l2

L2 info

ingress-replication-peers

ingress replication peer info

peer_ip

(Optional) show detailed info of a peer

Command Mode

- /exec

show forwarding nve l3 adjacency tunnel

show forwarding nve l3 adjacency tunnel <tunnel_id> [ bd <bd_id> | detail | module <num> | table <table_id> ] [ __readonly__ <tunnel_id> <bd_id> <table_id> <VNI> <Drop> <Refcount> <Origin> <State> <Del> ]

Syntax Description

Syntax Description

show

forwarding

display fib information

nve

nve related info

l3

Layer 3

adjacency

Adjacency info

tunnel

VXLAN tunnel

tunnel_id

tunnel_id

bd

(Optional) BD info

bd_id

(Optional) bd id

detail

(Optional) Show detailed information

module

(Optional) Slot/module

num

(Optional) Slot/module number

table

(Optional) Tenant table-id

table_id

(Optional) tenant table-id

__readonly__

(Optional)

tunnel_id

(Optional) tunnel_id

bd_id

(Optional) bd id

table_id

(Optional) tenant table-id

VNI

(Optional) vni

Drop

(Optional) Drop

Refcount

(Optional) Refcount

Origin

(Optional) origin

State

(Optional) state

Del

(Optional) del

Command Mode

- /exec

show forwarding nve l3 ecmp

show forwarding nve l3 ecmp

Syntax Description

Syntax Description

show

forwarding

display fib information

nve

nve related info

l3

Layer 3

ecmp

nve ecmp info

Command Mode

- /exec

show forwarding nve l3 peers

show forwarding nve l3 peers [ peers <peer_id> | tunnel <tunnel_id> | detail | module <num> ] + [ __readonly__ <tunnel_id> <peer_id> <peer_address> <interface> <rmac> <origin> <state> <del> <count> ]

Syntax Description

Syntax Description

show

show

forwarding

display fib information

nve

nve related info

l3

Layer 3

peers

nve peers

peer_id

(Optional) nve peer-id

tunnel

(Optional) VXLAN tunnel

tunnel_id

(Optional) Unique identifier for the tunnel

detail

(Optional) Show detailed information

module

(Optional) Slot/module

num

(Optional) Slot/module number

__readonly__

(Optional)

tunnel_id

(Optional) tunnel_id

peer_id

(Optional) peer_id

peer_address

(Optional) peer_address

interface

(Optional) interface

rmac

(Optional) rmac

origin

(Optional) origin

state

(Optional) state

del

(Optional) del

count

(Optional) count

Command Mode

- /exec

show forwarding otv

show forwarding otv <intf> [ peer <peer-id> ] [ module <module> ] [ __readonly__ <vlan> <peer-id> <peer_vlan_count><tunnel_ifindex><tunnel_ifname> ]

Syntax Description

Syntax Description

show

forwarding

fib information

otv

overlay-transport-virtualization

intf

overlay interface

peer

(Optional) overlay peer

peer-id

(Optional) overlay peer-id

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

vlan

(Optional) Vlan information

peer-id

(Optional) peer-id

Command Mode

- /exec

show forwarding otv ipv6 multicast route

show forwarding otv ipv6 multicast route [ vlan <vlan_id> ] [ module <module> ] [ __readonly__ [ <table_type> ] [ <vlan-id> ] [ <replicator> ] [ <num_routes> ] [ <num_starg_routes> ] [ <num_sg_routes> ] [ <num_gprefix_routes> ] [ <num_prefix_insert_fail> ] [ <num_groups> ] [ <num_sources> ] [ { TABLE_otv_mroute [ <src_addr> ] [ <src_len> ] [ <grp_addr> ] [ <grp_len> ] [ <df_ordinal> ] [ <rpfif> ] [ <flag> ] [ <route_pkts> ] [ <route_bytes> ] [ <otv_route_pkts> ] [ <otv_route_bytes> ] [ { TABLE_OIF <oif_count> [ <oiflist_id> ] [ <index> ] [ <refcount> ] [ { TABLE_OIFLIST <oifindex> [ <oif_pkts> ] [ <oif_bytes> ] [ <src_addr> ] [ <src_len> ] [ <oifname> ] [ <vlanid> ] [ <grp_addr> ] [ <grp_len> ] [ <otv_src_addr> ] [ <otv_grp_addr> ] } ] } ] } ] ]

Syntax Description

Syntax Description

show

show

forwarding

forwarding

otv

over-the-top virtualization

ipv6

ipv6

multicast

Multicast IPv6 information

route

Mcast route information

vlan

(Optional) vlan

vlan_id

(Optional) vlan id

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

table_type

(Optional) Table Type

vlan-id

(Optional) vlan id

replicator

(Optional) replicator name

num_routes

(Optional) Number of routes

num_starg_routes

(Optional) Number of (*,G) routes

num_sg_routes

(Optional) Number of (S,G) routes

num_gprefix_routes

(Optional) Number of (*,G-prefix) routes

num_prefix_insert_fail

(Optional) Prefix insert fail count

num_groups

(Optional) Number of group entries in the table

num_sources

(Optional) Number of (S, G) entries for the group address

TABLE_otv_mroute

(Optional)

src_addr

(Optional) Ipv6 address string

src_len

(Optional) Source Address Mask

grp_addr

(Optional) Ipv6 address string

grp_len

(Optional) Group address Mask

df_ordinal

(Optional) DF ordinal

rpfif

(Optional) RPF interface

flag

(Optional) Route type flag

route_pkts

(Optional) Route packet count

route_bytes

(Optional) Route bytes

otv_route_pkts

(Optional) OTV Route packet count

otv_route_bytes

(Optional) OTV Route bytes

TABLE_OIF

(Optional)

oif_count

(Optional) Number of OIFs

oiflist_id

(Optional) OIF list Identifier

index

(Optional) outgoing interface list index

refcount

(Optional) reference count

TABLE_OIFLIST

(Optional)

oifindex

(Optional) OIF Interface ifIndex

oif_pkts

(Optional) OIF packets

oif_bytes

(Optional) OIF bytes

src_addr

(Optional) Multicast IPv4 Source Address

src_len

(Optional) Source Address Mask

oifname

(Optional) OIF Interface name

vlanid

(Optional) vlan id of the route

grp_addr

(Optional) Multicast IPv4 Group Address

grp_len

(Optional) Group address Mask

otv_src_addr

(Optional) Multicast IPv4 Source Address

otv_grp_addr

(Optional) Multicast IPv4 Group Address

Command Mode

- /exec

show forwarding otv multicast outgoing-interface-list

show forwarding otv multicast outgoing-interface-list [ __readonly__ { TABLE_OIF <index> [ <refcount> ] [ <intf> ] [ { TABLE_OIFLIST <oifindex> [ <src_addr> ] [ <src_len> ] [ <oifname> ] [ <vlanid> ] [ <grp_addr> ] [ <grp_len> ] } ] } ]

Syntax Description

Syntax Description

show

forwarding

Forwarding information

otv

over-the-top virtualization

multicast

Multicast IPv4 information

outgoing-interface-list

show outgoing interface list info

__readonly__

(Optional)

TABLE_OIF

(Optional) outgoing interface list table

index

(Optional) outgoing interface list index

refcount

(Optional) reference count

intf

(Optional) interface name

TABLE_OIFLIST

(Optional) outgoing interface list table

oifindex

(Optional) OIF Interface ifIndex

src_addr

(Optional) Multicast IPv4 Source Address

src_len

(Optional) Source Address Mask

oifname

(Optional) OIF Interface name

vlanid

(Optional) vlan id of the route

grp_addr

(Optional) Multicast IPv4 Group Address

grp_len

(Optional) Group address Mask

Command Mode

- /exec

show forwarding otv multicast route

show forwarding otv multicast route [ [ vlan <vlan-id> ] | [ softwarebd <software-bd> ] ] [ module <module> ] [ __readonly__ <replicator> ]

Syntax Description

Syntax Description

show

show

forwarding

forwarding

otv

over-the-top virtualization

multicast

Multicast IPv4 information

route

Mcast route information

vlan

(Optional) vlan

vlan-id

(Optional) vlan id

softwarebd

(Optional) Software Bridge Domain

software-bd

(Optional) Software bd

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

replicator

(Optional) replicator name

Command Mode

- /exec

show forwarding otv vlan

show forwarding otv vlan [ <vlan_id> ] [ module <module> ] [ __readonly__ <vlan> ]

Syntax Description

Syntax Description

show

show

forwarding

forwarding

otv

otv

vlan

vlan

vlan_id

(Optional) vlan id

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

vlan

(Optional) vlan

Command Mode

- /exec

show forwarding pss route

show forwarding [ vrf { <vrf-name> | <vrf-known-name> } | table <table_id> ] [ ip | ipv4 ] pss route [ module <module> ]

Syntax Description

Syntax Description

show

show

forwarding

forwarding

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

table

(Optional) display info per vpn-id

table_id

(Optional) table number

ip

(Optional) ipv4

ipv4

(Optional) ipv4

pss

display info from pss

route

route

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding restart

show forwarding restart [ module <module> ]

Syntax Description

Syntax Description

show

forwarding

fib information

restart

restart fib

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding route

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] [ ip | ipv4 ] { route | rnhdb } [ recursive ] [ summary | detail | platform | partial | <prefix> [ longer-prefixes ] [ detail | platform ] | <address> [ detail | platform ] |

Syntax Description

Syntax Description

show

forwarding

display fib information

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

table

(Optional) display info per vpn-id

table_id

(Optional) table id in hex

ip

(Optional) ipv4

ipv4

(Optional) ipv4

route

display IP routing table

rnhdb

rnh-db

recursive

(Optional) display routes with recursive next hops

partial

(Optional) display routes with partial ECMPs

summary

(Optional) display route counts

prefix

(Optional) display single exact match route

longer-prefixes

(Optional) display longer prefixes

address

(Optional) display single longest match route

detail

(Optional) show detailed information about the routes

platform

(Optional) one command to show pi and pd info together

Command Mode

- /exec

show forwarding security group-tag

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> | vlan <vlan_id> ] [ ip | ipv4 ] security group-tag [ <addr> ] [ module <num> | vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] + [ __readonly__ <header> <vrfname> <tid> <pfx-count> <ipa> <tag> <tv> <vid> ]

Syntax Description

Syntax Description

show

forwarding

display fib information

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

table

(Optional) display info per vpn-id

table_id

(Optional) table number

vlan

(Optional) vlan

vlan_id

(Optional) vlan number

ip

(Optional) ipv4

ipv4

(Optional) ipv4

security

display IP security information

group-tag

ip_address->security_group_tag

addr

(Optional) specific ip address

module

(Optional) slot

__readonly__

(Optional)

header

(Optional) header string

vrfname

(Optional) VRF name

tid

(Optional) table identifier

num

(Optional) module number

pfx-count

(Optional) total prefix count in VRF

ipa

(Optional) ip address

tag

(Optional) security group tag

tv

(Optional) sgt valid

vid

(Optional) vlan indentifier

Command Mode

- /exec

show forwarding security mac

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] [ ip | ipv4 ] security mac [ <addr> ] [ module <module> | vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] + [ __readonly__ <header> <vrfname> <tid> <pfx-count> <ipa> <mac> <p> <m> <v> <intf> ]

Syntax Description

Syntax Description

show

forwarding

display fib information

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

table

(Optional) display info per vpn-id

table_id

(Optional) table number

ip

(Optional) ipv4

ipv4

(Optional) ipv4

security

display IP security information

mac

ip_address->mac_address

addr

(Optional) specific ip address

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

header

(Optional) header string

vrfname

(Optional) VRF name

tid

(Optional) table identifier

pfx-count

(Optional) total prefix count in VRF

ipa

(Optional) ip address

mac

(Optional) mac address

p

(Optional) 1 => ip->port binding

m

(Optional) 1 => ip->mac binding

v

(Optional) 1 => ip->vlan binding

intf

(Optional) ip->port interface

Command Mode

- /exec

show forwarding test on

show forwarding test { on | off } [ module <module> ]

Syntax Description

Syntax Description

show

forwarding

fib information

test

show test variable

on

set variable

off

reset variable

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show forwarding trace

show forwarding trace [ clear ] [ module <module> ] [ __readonly__ <op> ]

Syntax Description

Syntax Description

show

forwarding

display fib information

trace

display trace buffer

clear

(Optional) clear the trace buffer

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

op

(Optional) output

Command Mode

- /exec

show forwarding trace profile

show forwarding trace profile

Syntax Description

Syntax Description

show

forwarding

display fib information

trace

display trace buffer

profile

show the collection profiling information

Command Mode

- /exec

show forwarding trace profile funcstats

show forwarding trace profile funcstats [ enable | disable ] [ module <module> ] [ __readonly__ <op> ]

Syntax Description

Syntax Description

show

forwarding

display fib information

trace

display trace buffer

profile

show the collection profiling information

funcstats

function statistics

enable

(Optional) enable function statistics

disable

(Optional) disable function statistics

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

op

(Optional) output

Command Mode

- /exec

Chapter 8. G Show Commands

- show glbp

- show glbp brief

- show glbp capability

- show glbp internal event-history errors

- show glbp internal event-history msgs

- show glbp internal info

- show glbp internal mem-stats

- show guestshell

show glbp

show glbp [ vrf <vrf-name> ] [ interface <int-num> ] [ group <group-num> ] [ active | standby | disabled | init | listen ] + [ __readonly__ <show_glbp_start> { TABLE_grp_detail <sg_nsf_state> <sg_print_nsf_state> <sg_nsf_end> <sg_if_index> <sg_group_num> <sg_state> <sg_state_reason> <sg_state_count> <sg_state_last_change> <sg_vip> <sg_vip_attr> <sg_num_vip_sec> { TABLE_grp_vip_sec <sg_vip_sec> <sg_vip_sec_attr> } <sg_vip_sec_end> <sg_active_addr> <sg_cur_hello> <sg_cfg_hello> <sg_active_hello> <sg_cur_hold> <sg_cfg_hold> <sg_active_hold> <sg_is_hello_timer_running> <sg_next_hello> <sg_cur_redirect_time> <sg_cfg_redirect_time> <sg_active_redirect_time> <sg_cur_sec_holdtime> <sg_cfg_sec_holdtime> <sg_active_sec_holdtime> <sg_cfg_ext_holdtime> <sg_timer_end> <sg_auth_data_type> <sg_auth_data> <sg_preempt> <sg_preempt_min_delay> <sg_is_preempt_timer_running> <sg_preempt_ts> <sg_delay_end> <sg_active_priority> <sg_active_timer> <sg_standby_addr> <sg_standby_priority> <sg_standby_timer> <sg_router_end> <sg_grp_priority> <sg_grp_priority_attr> <sg_weighting> <sg_weighting_attr> <sg_weighting_satisfied> <sg_weighting_max> <sg_weighting_lower> <sg_weighting_upper> <sg_track_object> <sg_track_state> <sg_track_decrement> <sg_weighting_end> <sg_load_bal> <sg_red_name> <sg_mem_count> <sg_mem_start> { TABLE_grp_members <sg_mem_local_mac> <sg_mem_local_ip> <sg_mem_mac> <sg_mem_ip> <sg_is_mem_local> <sg_is_mem_authenticated> } <sg_mem_end> <sg_all_mem_end> <sg_fwd_count> <sg_active_fwd_count> { <sg_fwd_start> { TABLE_fwd_detail <sg_fwd_num> <sg_fwd_state> <sg_fwd_state_change_count> <sg_fwd_last_state_change> <sg_fwd_mac> <sg_fwd_mac_type> <sg_fwd_cfg_mac> <sg_fwd_owner> <sg_fwd_redirect> <sg_fwd_redirect_timer> <sg_fwd_is_sec_tmr_run> <sg_fwd_sec_timer> <sg_fwd_ttl> <sg_fwd_ttr> <sg_fwd_pre> <sg_fwd_pre_min_delay> <sg_fwd_is_pre_min_run> <sg_fwd_pre_min_val> <sg_fwd_active_router> <sg_fwd_active_router_attr> <sg_fwd_weighting> <sg_fwd_active_addr> <sg_fwd_active_prio> <sg_fwd_active_prio_attr> <sg_fwd_active_prio_weight_attr> <sg_fwd_active_timer_val> <sg_fwd_arp_replies> <sg_fwd_redirection> <sg_fwd_preempt> } <sg_fwd_end> <sg_all_fwd_end> } } <show_glbp_end> ]

Syntax Description

Syntax Description

show

Show running system information

glbp

Show GLBP

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

interface

(Optional) Interface

int-num

(Optional) Interface type and number

group

(Optional) Group number

group-num

(Optional) Group number

active

(Optional) Groups in active state

standby

(Optional) Groups in standby state

disabled

(Optional) Groups in disabled state

init

(Optional) Groups in init state

listen

(Optional) Groups in listen state

__readonly__

(Optional) Read only

show_glbp_start

(Optional) show glbp start

TABLE_grp_detail

(Optional) Group table detail

sg_nsf_state

(Optional) show nsf state

sg_print_nsf_state

(Optional) Print NSF state

sg_nsf_end

(Optional) End of NSF details

sg_if_index

(Optional) Interface type and number

sg_group_num

(Optional) Group number

sg_state

(Optional) glbp state

sg_state_reason

(Optional) Reason

sg_state_count

(Optional) Number of state changes

sg_state_last_change

(Optional) Time of last state change

sg_vip

(Optional) Virtual IP address

sg_vip_attr

(Optional) Virtual IP address attribute

sg_num_vip_sec

(Optional) Number of Secondary virtual IP address

TABLE_grp_vip_sec

(Optional) Group secondary ip address

sg_vip_sec

(Optional) Secondary virtual IP address

sg_vip_sec_attr

(Optional) Secondary Virtual IP address attribute

sg_vip_sec_end

(Optional) End of Secondary Virtual IP addresses

sg_active_addr

(Optional) Active IP address

sg_cur_hello

(Optional) Current Hello Time

sg_cfg_hello

(Optional) Configured Hello Time

sg_active_hello

(Optional) Active Hello Time

sg_cur_hold

(Optional) Current Hold Time

sg_cfg_hold

(Optional) Configured Hold Time

sg_active_hold

(Optional) Active Hold Time

sg_is_hello_timer_running

(Optional) Hello Timer

sg_next_hello

(Optional) Time for next hello

sg_cur_redirect_time

(Optional) Current redirect time

sg_cfg_redirect_time

(Optional) Configured redirect time

sg_active_redirect_time

(Optional) Active redirect time

sg_cur_sec_holdtime

(Optional) Current secondary hold time

sg_cfg_sec_holdtime

(Optional) Configured secondary hold time

sg_active_sec_holdtime

(Optional) Active secondary hold time

sg_cfg_ext_holdtime

(Optional) Configured Extended hold time

sg_timer_end

(Optional) End of GLBP Timer values

sg_auth_data_type

(Optional) Authentication data type

sg_auth_data

(Optional) Authentication data

sg_preempt

(Optional) Preemption enabled

sg_preempt_min_delay

(Optional) Preemption min delay

sg_is_preempt_timer_running

(Optional) Preemption timer running

sg_preempt_ts

(Optional) Preemption timestamp

sg_delay_end

(Optional) End of delay values

sg_active_priority

(Optional) Active router priority

sg_active_timer

(Optional) Active timer value

sg_standby_addr

(Optional) Standby address

sg_standby_priority

(Optional) Standby priority

sg_standby_timer

(Optional) Standby timer value

sg_router_end

(Optional) End of Routers

sg_grp_priority

(Optional) Group priority

sg_grp_priority_attr

(Optional) Group priority attribute

sg_weighting

(Optional) Weighting

sg_weighting_attr

(Optional) Weighting attribute

sg_weighting_satisfied

(Optional) Weighting satisfied

sg_weighting_max

(Optional) Weighting max

sg_weighting_lower

(Optional) Weighting lower

sg_weighting_upper

(Optional) Weighting upper

sg_track_object

(Optional) Track

sg_track_state

(Optional) Track state

sg_track_decrement

(Optional) Track decrement

sg_weighting_end

(Optional) End of weighting

sg_load_bal

(Optional) Load balancing

sg_red_name

(Optional) IP redundancy name

sg_mem_count

(Optional) Membership count

sg_mem_start

(Optional) Start of membership attributes

TABLE_grp_members

(Optional) Group members

sg_mem_local_mac

(Optional) Member's local mac address

sg_mem_local_ip

(Optional) Member's local ip address

sg_mem_mac

(Optional) Member's mac address

sg_mem_ip

(Optional) Member's ip address

sg_is_mem_local

(Optional) Local

sg_is_mem_authenticated

(Optional) Is Member authenticated

sg_mem_end

(Optional) End of membership attributes

sg_all_mem_end

(Optional) End of all members

sg_fwd_count

(Optional) Number of forwarders in the group

sg_active_fwd_count

(Optional) Number of active forwarders in group

sg_fwd_start

(Optional) Forwarder Start attribute

TABLE_fwd_detail

(Optional) Forwarder table detail

sg_fwd_num

(Optional) Forwarder Number

sg_fwd_state

(Optional) Forwarder State

sg_fwd_state_change_count

(Optional) Forwarder State Change count

sg_fwd_last_state_change

(Optional) Time of last State Change

sg_fwd_mac

(Optional) Forwarder MAC address

sg_fwd_mac_type

(Optional) Forwarder MAC address type

sg_fwd_cfg_mac

(Optional) Configured Forwarder MAC address

sg_fwd_owner

(Optional) Forwarder owner

sg_fwd_redirect

(Optional) Forwarder redirection enabled

sg_fwd_redirect_timer

(Optional) Forwarder redirection timer

sg_fwd_is_sec_tmr_run

(Optional) Is Forwarder secondary timer running

sg_fwd_sec_timer

(Optional) Forwarder secondary timer

sg_fwd_ttl

(Optional) Forwarder ttl

sg_fwd_ttr

(Optional) Forwarder ttr

sg_fwd_pre

(Optional) Forwarder preemption enabled

sg_fwd_pre_min_delay

(Optional) Forwarder preempt min delay

sg_fwd_is_pre_min_run

(Optional) Is Forwarder preempt min running

sg_fwd_pre_min_val

(Optional) Forwarder preempt min value

sg_fwd_active_router

(Optional) Forwarder active router address

sg_fwd_active_router_attr

(Optional) Forwarder active router attribute

sg_fwd_weighting

(Optional) Forwarder weighting

sg_fwd_active_addr

(Optional) Forwarder active address

sg_fwd_active_prio

(Optional) Forwarder active priority

sg_fwd_active_prio_attr

(Optional) Forwarder priority attribute

sg_fwd_active_prio_weight_attr

(Optional) Forwarder priority weight attribute

sg_fwd_active_timer_val

(Optional) Forwarder active timer val

sg_fwd_arp_replies

(Optional) Forwarder arp replies

sg_fwd_redirection

(Optional) Forwarder redirection string

sg_fwd_preempt

(Optional) Forwarder preemption string

sg_fwd_end

(Optional) Forwarder End attribute

sg_all_fwd_end

(Optional) All Forwarders End attribute

show_glbp_end

(Optional) End of Group

Command Mode

- /exec

show glbp brief

show glbp [ vrf <vrf-name> ] [ interface <int-num> ] [ group <group-num> ] [ active | standby | disabled | init | listen ] + brief [ __readonly__ { <sg_brf_start> <sg_brf_show_header> { TABLE_grp <sg_brf_int> <sg_brf_group> <sg_brf_pri> <sg_brf_state> <sg_brf_vip> <sg_brf_act> <sg_brf_stdby> } <sg_brf_gener_end> <sg_brf_fwd_start> { TABLE_fwd <sg_brf_fwd_int> <sg_brf_fwd_group> <sg_brf_fwd_num> <sg_brf_fwd_pri> <sg_brf_fwd_state> <sg_brf_fwd_mac> <sg_brf_fwd_act> } <sg_brf_fwd_end> <sg_brf_all_fwd_end> <sg_brf_end> } ]

Syntax Description

Syntax Description

show

Show running system information

glbp

Show GLBP

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

interface

(Optional) Interface

int-num

(Optional) Interface type and number

group

(Optional) Group number

group-num

(Optional) Group number

active

(Optional) Groups in active state

standby

(Optional) Groups in standby state

disabled

(Optional) Groups in disabled state

init

(Optional) Groups in init state

listen

(Optional) Groups in listen state

brief

Brief output

__readonly__

(Optional) Read only

sg_brf_start

(Optional) Start of group brief

sg_brf_show_header

(Optional) Show brief header

TABLE_grp

(Optional) Group table

sg_brf_int

(Optional) Interface type and number

sg_brf_group

(Optional) Group number

sg_brf_pri

(Optional) Group priority

sg_brf_state

(Optional) Group state

sg_brf_vip

(Optional) Virtual IP address

sg_brf_act

(Optional) Active router

sg_brf_stdby

(Optional) Standby router

sg_brf_gener_end

(Optional) End of generic configuration for group

sg_brf_fwd_start

(Optional) Start of forwarder brief

TABLE_fwd

(Optional) Forwarder table

sg_brf_fwd_int

(Optional) Forwarder interface

sg_brf_fwd_group

(Optional) Forwarder group number

sg_brf_fwd_num

(Optional) Forwarder number

sg_brf_fwd_pri

(Optional) Forwarder priority

sg_brf_fwd_state

(Optional) Forwarder state

sg_brf_fwd_mac

(Optional) Forwarder MAC address

sg_brf_fwd_act

(Optional) Forwarder active address

sg_brf_fwd_end

(Optional) End of forwarder brief

sg_brf_all_fwd_end

(Optional) End of all forwarders in group

sg_brf_end

(Optional) End of group brief

Command Mode

- /exec

show glbp capability

show glbp capability [ interface <int-num> ] [ __readonly__ <sg_cap_header> <sg_cap_start> { TABLE_cap <sg_cap_int> <sg_cap_int_type> <sg_cap_support> <sg_cap_max_groups> } <sg_cap_end> <sg_cap_all_if_end> ]

Syntax Description

Syntax Description

show

Show running system information

glbp

GLBP

capability

GLBP capability

interface

(Optional) Interface

int-num

(Optional) Interface type and number

__readonly__

(Optional) Read only

sg_cap_header

(Optional) GLBP capability header

sg_cap_start

(Optional) Start of GLBP capability

TABLE_cap

(Optional) Capability table

sg_cap_int

(Optional) Interface

sg_cap_int_type

(Optional) Interface type

sg_cap_support

(Optional) Is GLBP supported

sg_cap_max_groups

(Optional) Maximum number of GLBP groups

sg_cap_end

(Optional) End of GLBP capability for interface

sg_cap_all_if_end

(Optional) End of GLBP capability for all interfaces

Command Mode

- /exec

show glbp internal event-history errors

show glbp internal event-history errors

Syntax Description

Syntax Description

show

Show running system information

glbp

About GLBP

internal

Internal GLBP information

event-history

Various event logs of GLBP

errors

Error logs of GLBP

Command Mode

- /exec

show glbp internal event-history msgs

show glbp internal event-history msgs

Syntax Description

Syntax Description

show

Show running system information

glbp

About GLBP

internal

Internal GLBP information

event-history

Various event logs of GLBP

msgs

Message logs of GLBP

Command Mode

- /exec

show glbp internal info

show glbp internal info [ global | { [ interface <int-num> ] [ group <group-num> ] } ]

Syntax Description

Syntax Description

show

Show running system information

glbp

About GLBP

internal

Internal GLBP information

info

Show internal data structure information

global

(Optional) Show internal data structure global information

interface

(Optional) Show internal data structure interface information

int-num

(Optional) Interface type and number

group

(Optional) Group number

group-num

(Optional) Group number

Command Mode

- /exec

show glbp internal mem-stats

show glbp internal mem-stats [ uuid <i0> ] [ glbp-only ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

glbp

About glbp

internal

Internal GLBP information

mem-stats

Show memory allocation statistics for GLBP

uuid

(Optional) Show stats only for this uuid

i0

(Optional) Enter uuid

glbp-only

(Optional) Show stats for only GLBP

detail

(Optional) Show detail memstats for GLBP

Command Mode

- /exec

show guestshell

show guestshell [ { detail } ] [ __readonly__ [ TABLE_detail <name> <package_name> <application_name> <application_version> <application_description> <key_type> <signing_method> <licensing_name> <licensing_version> <ova_path> <state> <disk_reservation> <memory_reservation> <cpu_reservation> TABLE_attached_devices <type> <name> <alias> ] ]

Syntax Description

Syntax Description

show

Show running system information

guestshell

Display guest shell service information

detail

(Optional) Detailed guest shell service information

__readonly__

(Optional) Read Only

TABLE_detail

(Optional) Virtual service detail table

name

(Optional) Virtual service name

package_name

(Optional) Virtual service package name

application_name

(Optional) Name of the application

application_version

(Optional) Version of the application

application_description

(Optional) Description of the application

key_type

(Optional) Virtual service key type

signing_method

(Optional) Method used to sign the package

licensing_name

(Optional) Name of the license

licensing_version

(Optional) Version of the license

ova_path

(Optional) Virtual service OVA path

state

(Optional) Virtual service state

disk_reservation

(Optional) Virtual service disk reservation

memory_reservation

(Optional) Virtual service memory reservation

cpu_reservation

(Optional) Virtual service CPU reservation

TABLE_attached_devices

(Optional) Attached devices table

type

(Optional) Type of the attached device

name

(Optional) Name of the attached device

alias

(Optional) Alias for the attached device

Command Mode

- /exec

Chapter 9. H Show Commands

- show hardware

- show hardware access-list lou resource threshold

- show hardware access-list resource pooling

- show hardware access-list tcam

- show hardware capacity

- show hardware capacity eobc

- show hardware capacity fabric-utilization

- show hardware capacity forwarding

- show hardware capacity interface

- show hardware capacity module

- show hardware capacity power

- show hardware fabricpath mac-learning module

- show hardware feature-capability

- show hardware flow aging

- show hardware flow entry address type

- show hardware flow ip

- show hardware flow ipmac

- show hardware flow ipv6

- show hardware flow l2

- show hardware flow mpls

- show hardware flow sampler

- show hardware flow utilization

- show hardware forwarding interface statistics mode

- show hardware forwarding memory health detail

- show hardware forwarding memory health summary

- show hardware internal access-list lookup interface input expanded

- show hardware internal bootflash model

- show hardware internal buffer info pkt-stats

- show hardware internal buffer info pkt-stats input

- show hardware internal buffer info tah-pkt-stats

- show hardware internal buffer poll-interval

- show hardware internal cpu-mac eobc counters

- show hardware internal cpu-mac eobc registers

- show hardware internal cpu-mac eobc stats

- show hardware internal cpu-mac inband active-fm traffic-from-sup

- show hardware internal cpu-mac inband active-fm traffic-to-sup

- show hardware internal cpu-mac inband counters

- show hardware internal cpu-mac inband registers

- show hardware internal cpu-mac inband stats

- show hardware internal cpu-mac mgmt counters

- show hardware internal cpu-mac mgmt registers

- show hardware internal cpu-mac mgmt stats

- show hardware internal cpu interface asic counters module instance

- show hardware internal dev-port-map

- show hardware internal dev-version

- show hardware internal dev-version details

- show hardware internal eobc stats

- show hardware internal errors2

- show hardware internal errors module

- show hardware internal fabric interface asic counters module

- show hardware internal fabric interface asic counters module instance asic-port

- show hardware internal flow resource utilization

- show hardware internal forwarding adjacency statistics default-route

- show hardware internal forwarding adjacency utilization

- show hardware internal forwarding l3 counters

- show hardware internal forwarding table utilization

- show hardware internal forwarding table utilization mib module

- show hardware internal inband-rcpu cpu-queue slot

- show hardware internal interface asic counters

- show hardware internal interface asic counters module

- show hardware internal logflash model

- show hardware internal logflash model

- show hardware internal memory-ecc statistics

- show hardware internal memory-model

- show hardware internal mgmt0 stats

- show hardware internal ns buffer info pkt-stats

- show hardware internal ns interrupts

- show hardware internal plog errors

- show hardware internal plog msgs

- show hardware internal plog print

- show hardware internal plog print list-file-types

- show hardware internal plog stat uuid

- show hardware internal proc-info

- show hardware internal sensor event-history errors

- show hardware internal sensor event-history msgs

- show hardware internal sensor mem-stats

- show hardware internal sprom event-log

- show hardware internal statistics module-all pktflow all

- show hardware internal statistics module-all pktflow rates

- show hardware internal statistics module-all rates

- show hardware internal statistics module pktflow all

- show hardware internal statistics module pktflow rates

- show hardware internal statistics module rates

- show hardware internal statistics pktflow all

- show hardware internal statistics pktflow rates

- show hardware internal statistics rates

- show hardware internal tah interface

- show hardware internal tah niv_idx

- show hardware internal tah sdk logs all

- show hardware internal version

- show hardware ip verify

- show hardware profile status

- show hardware profile tcam region

- show hardware qos afd profile

- show hardware qos burst-detect max-records

- show hardware qos eoq stats-class

- show hardware qos include ipg

- show hardware qos ing-pg-hdrm-reserve

- show hardware qos ing-pg-no-min

- show hardware qos ing-pg-share

- show hardware qos min-buffer

- show hardware qos ns-buffer-profile

- show hardware qos ns-mcq3-alias

- show hardware rate-limiter

- show hardware rate-limiter span-egress

- show hardware rl snmp class-id

- show hardware rl snmp global class-id

- show hardware rl snmp local snmp-index class-id

- show hostname

- show hosts

- show hsrp

- show hsrp anycast

- show hsrp anycast interface vlan

- show hsrp anycast internal info

- show hsrp anycast internal info pss-rec config

- show hsrp anycast remote-db

- show hsrp anycast summary

- show hsrp bfd-sessions

- show hsrp bfd-sessions

- show hsrp delay

- show hsrp ext-mib sec-addr

- show hsrp ext-mib use-bia

- show hsrp internal bulk-db

- show hsrp internal counters

- show hsrp internal counters

- show hsrp internal debugs

- show hsrp internal errors

- show hsrp internal info

- show hsrp internal info fsrv

- show hsrp internal info pss-rec config

- show hsrp internal mem-stats

- show hsrp internal msgs

- show hsrp mgo

- show hsrp summary

show hardware

show hardware [ __readonly__ <header_str> <bios_ver_str> [ <loader_ver_str> ] <kickstart_ver_str> [ <sys_ver_str> ] <bios_cmpl_time> <kick_file_name> <kick_cmpl_time> <kick_tmstmp> [ <isan_file_name> ] [ <isan_cmpl_time> ] [ <isan_tmstmp> ] <chassis_id> <module_id> <cpu_name> <memory> <mem_type> <proc_board_id> [ <host_name> ] <bootflash_size> [ <slot0_size> ] <kern_uptm_days> <kern_uptm_hrs> <kern_uptm_mins> <kern_uptm_secs> <rr_usecs> <rr_ctime> <rr_reason> [ <rr_sys_ver> ] [ <rr_service> ] [ <manufacturer> ] { TABLE_slot [ TABLE_slot_info [ [ <num_slot_str> ] [ <status_ok_empty> ] [ [ <type> [ <num_submods> ] ] <model_num> <hw_ver> <part_num> <part_revision> <manuf_date> <serial_num> <CLEI_code> ] ] ] } ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

__readonly__

(Optional)

header_str

(Optional)

bios_ver_str

(Optional)

loader_ver_str

(Optional)

kickstart_ver_str

(Optional)

sys_ver_str

(Optional)

bios_cmpl_time

(Optional)

kick_file_name

(Optional)

kick_cmpl_time

(Optional)

kick_tmstmp

(Optional)

isan_file_name

(Optional)

isan_cmpl_time

(Optional)

isan_tmstmp

(Optional)

chassis_id

(Optional)

module_id

(Optional)

cpu_name

(Optional)

memory

(Optional)

mem_type

(Optional)

proc_board_id

(Optional)

bootflash_size

(Optional)

slot0_size

(Optional)

host_name

(Optional)

kern_uptm_days

(Optional)

kern_uptm_hrs

(Optional)

kern_uptm_mins

(Optional)

kern_uptm_secs

(Optional)

rr_usecs

(Optional)

rr_ctime

(Optional)

rr_reason

(Optional)

rr_sys_ver

(Optional)

rr_service

(Optional)

manufacturer

(Optional)

TABLE_slot

(Optional) Slot

num_slot_str

(Optional) Number of elements

TABLE_slot_info

(Optional) Slot Info

status_ok_empty

(Optional) Status (Present or Absent)

type

(Optional) Description of the element

num_submods

(Optional) Number of Submodules

model_num

(Optional) Model Number

hw_ver

(Optional) Hardware version

part_num

(Optional) Part Number

part_revision

(Optional) Part revision

manuf_date

(Optional) Manufacturing date

serial_num

(Optional) Serial Number

CLEI_code

(Optional) CLEI code

Command Mode

- /exec

show hardware access-list lou resource threshold

show hardware access-list lou resource threshold [ __readonly__ { current [ { lou [ { resource [ { threshold [ { <threshold_value> } ] } ] } ] } ] } ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

access-list

Access Control List

lou

LOU

resource

hardware resource

threshold

port expansion threshold

__readonly__

(Optional)

current

(Optional)

lou

(Optional)

resource

(Optional)

threshold

(Optional)

threshold_value

(Optional)

Command Mode

- /exec

show hardware access-list resource pooling

show hardware access-list resource pooling [ __readonly__ <mod-num> <status> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

access-list

Access Control List

resource

Hardware resource

pooling

ACL programming across TCAM banks

__readonly__

(Optional)

mod-num

(Optional) module number

status

(Optional) Banchaining status

Command Mode

- /exec

show hardware access-list tcam

show hardware access-list tcam { { template { nfe | nfe2 | l2-l3 | l3 | <name> | all } } | { region } } [ __readonly__ { TCAM_Region [ { TABLE_Sizes <type> <tcam_size> <tcam_width> } ] } ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

access-list

Access Control List

tcam

Show tcam parameters

region

Show tcam region sizes

__readonly__

(Optional)

TCAM_Region

(Optional)

TABLE_Sizes

(Optional)

type

(Optional)

tcam_size

(Optional)

tcam_width

(Optional)

template

Specify template name

nfe

NFE (Trident2) TCAM template

nfe2

NFE2 (Tomahawk) tcam template

l2-l3

L2-L3 default tcam template

l3

L3 default tcam template

name

Name of custom template to be displayed

all

Display all custom templates

Command Mode

- /exec

show hardware capacity

show hardware capacity

Syntax Description

Syntax Description

show

Show running system information

hardware

Hardware related

capacity

Hardware usage levels for Power, Switching Fabric, Flash, etc

Command Mode

- /exec

show hardware capacity eobc

show hardware capacity eobc [ __readonly__ { eobc_usage <eobc_rx_packets> <eobc_rx_dropped> <eobc_rx_pps> <eobc_tx_packets> <eobc_tx_dropped> <eobc_tx_pps> } ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Hardware related

capacity

resource inventory and/or usage level

eobc

EOBC resources

__readonly__

(Optional)

eobc_usage

(Optional)

eobc_rx_packets

(Optional)

eobc_rx_dropped

(Optional)

eobc_rx_pps

(Optional)

eobc_tx_packets

(Optional)

eobc_tx_dropped

(Optional)

eobc_tx_pps

(Optional)

Command Mode

- /exec

show hardware capacity fabric-utilization

show hardware capacity fabric-utilization

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

capacity

resource inventory and/or usage level

fabric-utilization

Show per module Fabric utilization

Command Mode

- /exec

show hardware capacity forwarding

show hardware capacity forwarding

Syntax Description

Syntax Description

show

Show running system information

hardware

Hardware related

capacity

Hardware usage levels for Power, Switching Fabric, Flash, etc

forwarding

L2/L3 Forwarding resources

Command Mode

- /exec

show hardware capacity interface

show hardware capacity interface [ __readonly__ { TABLE_module_drops <module_drops> <tx_drops> <rx_drops> <max_tx_port> <max_rx_port> } { TABLE_module_buffers <module_buffers> <tx_buffers> <rx_buffers> } ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Hardware related

capacity

Usage levels

interface

Interface Resources - Tx/Rx drops and Tx/Rx buffers

__readonly__

(Optional) Read Only

module_drops

(Optional) Module number for Tx/Rx drops

TABLE_module_drops

(Optional) show module

tx_drops

(Optional) Tx drops

rx_drops

(Optional) Rx drops

max_tx_port

(Optional) Port with max Tx drops

max_rx_port

(Optional) Port with max Rx drops

module_buffers

(Optional) Module number for Tx/Rx buffers

TABLE_module_buffers

(Optional) show module

tx_buffers

(Optional) Tx buffers

rx_buffers

(Optional) Rx buffers

Command Mode

- /exec

show hardware capacity module

show hardware capacity module [ __readonly__ { sup_ha_status <sup_ha_admin_status> <sup_ha_oper_status> <dual_sup_hw_state> <redundancy_state> } { switch_resouces { TABLE_lcinfo <mod_num> <model_num> <part_num> <serial_num> } { TABLE_xbarinfo <mod_num1> <model_num1> <part_num1> <serial_num1> } } { TABLE_flash_nvram_info <mod_num2> <dev_name> <total_bytes> <free_bytes> <percent_used> } ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Hardware related

capacity

resource inventory and/or usage level

module

SUP, LC, XBAR

__readonly__

(Optional)

sup_ha_status

(Optional)

sup_ha_admin_status

(Optional)

sup_ha_oper_status

(Optional)

dual_sup_hw_state

(Optional)

redundancy_state

(Optional)

switch_resouces

(Optional)

TABLE_lcinfo

(Optional)

mod_num

(Optional)

model_num

(Optional)

part_num

(Optional)

serial_num

(Optional)

TABLE_xbarinfo

(Optional)

mod_num1

(Optional)

model_num1

(Optional)

part_num1

(Optional)

serial_num1

(Optional)

TABLE_flash_nvram_info

(Optional)

mod_num2

(Optional)

dev_name

(Optional)

total_bytes

(Optional)

free_bytes

(Optional)

percent_used

(Optional)

Command Mode

- /exec

show hardware capacity power

show hardware capacity power [ __readonly__ { power_summary <ps_redun_mode_admin> <ps_redun_mode_oper> <power_total> <power_rsvd> <power_rsvd_percent> <power_given_mod> <power_given_mod_percent> <power_avail> <power_avail_percent> <power_out_actual_draw> <power_input_actual_draw> } ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Hardware related

capacity

resource inventory and/or usage level

power

power summary

__readonly__

(Optional)

power_summary

(Optional)

ps_redun_mode_admin

(Optional) Mode: Redundant or Non-redundant

ps_redun_mode_oper

(Optional) Mode: Redundant or Non-redundant

power_total

(Optional)

power_rsvd

(Optional)

power_rsvd_percent

(Optional)

power_given_mod

(Optional)

power_given_mod_percent

(Optional)

power_avail

(Optional)

power_avail_percent

(Optional)

power_out_actual_draw

(Optional) Total Power Output, Actuals

power_input_actual_draw

(Optional) Total Power Input, Actuals

Command Mode

- /exec

show hardware fabricpath mac-learning module

show hardware fabricpath mac-learning module <module> [ __readonly__ { [ { TABLE_module <module_num> <port_group> <mac_learning> } ] } ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

fabricpath

Fabric Path

mac-learning

MAC Learning

module

Specify a module number

module

Specify a module number

__readonly__

(Optional)

TABLE_module

(Optional)

module_num

(Optional) Specify a module number

port_group

(Optional)

mac_learning

(Optional)

Command Mode

- /exec

show hardware feature-capability

show hardware feature-capability [ detailed ] [ __readonly__ [ TABLE_feature_support <feature_name> [ TABLE_module_support <mod_inst> <support> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

feature-capability

show registered features supported

detailed

(Optional) detailed

__readonly__

(Optional)

TABLE_feature_support

(Optional) show features supported

feature_name

(Optional) feature name

TABLE_module_support

(Optional) show registered features supported

mod_inst

(Optional) module instance

support

(Optional) support details

Command Mode

- /exec

show hardware flow aging

show hardware flow aging [ instance <inst> ] [ module <num> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

flow

Netflow Module

aging

Aging Info

instance

(Optional) Instance

inst

(Optional) Earl Instance

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

show hardware flow entry address type

show hardware flow entry address <addr> type { ip | ipv6 | l2 | mpls } [ instance <inst> ] [ module <num> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

flow

Netflow Module

entry

Netflow Table Entry

address

Netflow Table Address

addr

Netflow Table Address

type

Flow Type

ip

Internet Protocol Version 4

ipv6

Internet Protocol Version 6

l2

Layer 2 Protocol

mpls

MPLS Protocol

instance

(Optional) Instance

inst

(Optional) Earl Instance

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

show hardware flow ip

show hardware flow ip [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ detail ] [ module <num> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

flow

Netflow Module

ip

Internet Protocol Version 4

monitor

(Optional) Netflow Flow Monitor

mname

(Optional) Netflow Flow Monitor Name

profile

(Optional) Flow Profile

prof_id

(Optional) Netflow Profile ID

vlan

(Optional) Vlan commands

vlan_id

(Optional) VLAN ID 1-4094

interface

(Optional) Interface

interface

(Optional) Interface Name

instance

(Optional) Instance

inst

(Optional) Earl Instance

detail

(Optional) Detailed Output Display

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

show hardware flow ipmac

show hardware flow ipmac [ { { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ detail ] [ module <num> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

flow

Netflow Module

ipmac

IPv4+MAC

profile

(Optional) Flow Profile

prof_id

(Optional) Netflow Profile ID

vlan

(Optional) Vlan commands

vlan_id

(Optional) VLAN ID 1-4094

interface

(Optional) Interface

interface

(Optional) Interface Name

instance

(Optional) Instance

inst

(Optional) Earl Instance

detail

(Optional) Detailed Output Display

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

show hardware flow ipv6

show hardware flow ipv6 [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ detail ] [ module <num> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

flow

Netflow Module

ipv6

Internet Protocol Version 6

monitor

(Optional) Netflow Flow Monitor

mname

(Optional) Netflow Flow Monitor Name

profile

(Optional) Flow Profile

prof_id

(Optional) Netflow Profile ID

vlan

(Optional) Vlan commands

vlan_id

(Optional) VLAN ID 1-4094

interface

(Optional) Interface

interface

(Optional) Interface Name

instance

(Optional) Instance

inst

(Optional) Earl Instance

detail

(Optional) Detailed Output Display

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

show hardware flow l2

show hardware flow l2 [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } } ] [ instance <inst> ] [ detail ] [ module <num> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

flow

Netflow Module

l2

Layer 2 Protocol

monitor

(Optional) Netflow Flow Monitor

mname

(Optional) Netflow Flow Monitor Name

profile

(Optional) Flow Profile

prof_id

(Optional) Netflow Profile ID

vlan

(Optional) Vlan commands

vlan_id

(Optional) VLAN ID 1-4094

instance

(Optional) Instance

inst

(Optional) Earl Instance

detail

(Optional) Detailed Output Display

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

show hardware flow mpls

show hardware flow mpls [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ detail ] [ module <num> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

flow

Netflow Module

mpls

MPLS Protocol

monitor

(Optional) Netflow Flow Monitor

mname

(Optional) Netflow Flow Monitor Name

profile

(Optional) Flow Profile

prof_id

(Optional) Netflow Profile ID

vlan

(Optional) Vlan commands

vlan_id

(Optional) VLAN ID 1-4094

interface

(Optional) Interface

interface

(Optional) Interface Name

instance

(Optional) Instance

inst

(Optional) Earl Instance

detail

(Optional) Detailed Output Display

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

show hardware flow sampler

show hardware flow sampler { all | count | index <index> | name <sname> } [ detail ] [ instance <inst> ] [ module <num> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

flow

Netflow Module

sampler

Flow Sampler

all

Netflow Sampler Usage

count

Netflow Sampler Utilization

index

Netflow Sampler Index

index

Netflow Sampler Index

name

Netflow Sampler Name

sname

Netflow Sampler Name

detail

(Optional) Detailed Output Display

instance

(Optional) Instance

inst

(Optional) Clipper Instance

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

show hardware flow utilization

show hardware flow utilization [ instance <inst> ] [ module <num> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

flow

Netflow Module

utilization

NT Table Utilization

instance

(Optional) Instance

inst

(Optional) Earl Instance

module

(Optional) Line card module

num

(Optional) slot number

Command Mode

- /exec

show hardware forwarding interface statistics mode

show hardware forwarding interface statistics mode [ __readonly__ { system [ { <sysmode> } ] [ { TABLE_module <module> <modmode> } ] } ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

forwarding

Show hardware information for forwarding path

interface

Interface

statistics

Statistics

mode

Statistics mode

__readonly__

(Optional)

system

(Optional)

sysmode

(Optional)

TABLE_module

(Optional)

module

(Optional) Specify a module number

modmode

(Optional)

Command Mode

- /exec

show hardware forwarding memory health detail

show hardware forwarding memory health detail

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

forwarding

forwarding information

memory

memory information

health

memory health information

detail

show the detail

Command Mode

- /exec

show hardware forwarding memory health summary

show hardware forwarding memory health summary

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

forwarding

forwarding information

memory

memory information

health

memory health information

summary

show the summary

Command Mode

- /exec

show hardware internal access-list lookup interface input expanded

show hardware internal access-list lookup { { { { src-ip <sa-ip> dst-ip <da-ip> } | { src-ipv6 <v6sa> dst-ipv6 <v6da> } } protocol <proto> l4-src-port <sport> l4-dst-port <dport> [ vlan <vlan_val> ] } | { src-mac <macsa> dst-mac <macda> [ etype <ethertype> ] } } interface <ifname> { input | output } { expanded | summary } [ instance <inst> ] [ module <num> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Hardware information

internal

Commands for internal use

access-list

Access Control List

lookup

Do a lookup

src-ip

Source IP

sa-ip

IP address

dst-ip

Destination IP

da-ip

IP address

src-ipv6

IPv6 Source Address

dst-ipv6

IPv6 Destination Address

src-mac

Source MAC address

macsa

Source MAC address

dst-mac

Destination MAC Address

macda

Destination MAC Address

etype

(Optional) Ether type

ethertype

(Optional) Ether type

protocol

L4 protocol

proto

L4 protocol Value

l4-src-port

L4 Source port

sport

L4 Dest port value

l4-dst-port

L4 Source port

dport

L4 Dest port value

interface

interface name

ifname

display access list for the interface

vlan

(Optional) vlan for L2 Trunk Ports

vlan_val

(Optional) Vlan value

input

Input/ingress direction

output

Output/egress direction

expanded

Detailed view

summary

Brief view

instance

(Optional) ASIC Instance Number

inst

(Optional) ASIC Instance Number in Hex

module

(Optional) Slot/module

num

(Optional) Slot/module number

Command Mode

- /exec

show hardware internal bootflash model

show hardware internal bootflash model

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

bootflash

Show bootflash related information

model

Show bootflash model name

Command Mode

- /exec

show hardware internal buffer info pkt-stats

show hardware internal buffer info pkt-stats [ module <module> ] [ instance <instance> ] [ brief | { [ peak ] [ detail ] } | port-stuck-log [ [ asic-port <port> ] ] | port-log [ [ asic-port <port> ] ] | threshold ] [ carving ] [ cpu ] [ __readonly__ { TABLE_instance <instance> <port_logs> <port_stuck_logs> <cpu_start> <cpu> <cpu_xpe_a> <cpu_xpe_b> <port_threshold> <supports_8q> <total_instant_usage_1> <rem_instant_usage_1> <max_cell_usage_1> <switch_cell_count_1> <total_instant_usage_2> <rem_instant_usage_2> <max_cell_usage_2> <switch_cell_count_2> <total_instant_usage_3> <rem_instant_usage_3> <max_cell_usage_3> <switch_cell_count_3> <total_instant_usage_4> <rem_instant_usage_4> <max_cell_usage_4> <switch_cell_count_4> <switch_cell_count_4_detail> <xpe_r_a_instant_usage_1> <xpe_r_b_instant_usage_1> <xpe_s_a_instant_usage_1> <xpe_s_b_instant_usage_1> <xpe_r_a_instant_usage_4> <xpe_r_b_instant_usage_4> <xpe_s_a_instant_usage_4> <xpe_s_b_instant_usage_4> <xpe_r_a_rem_instant_usage_1> <xpe_r_b_rem_instant_usage_1> <xpe_s_a_rem_instant_usage_1> <xpe_s_b_rem_instant_usage_1> <xpe_r_a_rem_instant_usage_4> <xpe_r_b_rem_instant_usage_4> <xpe_s_a_rem_instant_usage_4> <xpe_s_b_rem_instant_usage_4> <xpe_r_a_max_cell_usage_1> <xpe_r_b_max_cell_usage_1> <xpe_s_a_max_cell_usage_1> <xpe_s_b_max_cell_usage_1> <xpe_r_a_max_cell_usage_4> <xpe_r_b_max_cell_usage_4> <xpe_s_a_max_cell_usage_4> <xpe_s_b_max_cell_usage_4> <xpe_r_a_switch_cell_count_1> <xpe_r_b_switch_cell_count_1> <xpe_s_a_switch_cell_count_1> <xpe_s_b_switch_cell_count_1> <xpe_r_a_switch_cell_count_4> <xpe_r_b_switch_cell_count_4> <xpe_s_a_switch_cell_count_4> <xpe_s_b_switch_cell_count_4> { TABLE_interface <stats_start> <peak_stats_start> <front_port> <ucast_count_1> <ucast_count_2> <ucast_count_3> <ucast_count_4> <ucast_count_5> <ucast_count_6> <ucast_count_7> <ucast_count_8> <ucast_count_9> <ucast_count_10> <xpe_a_ucast_count_1> <xpe_b_ucast_count_1> <xpe_ucast_count_2> <xpe_ucast_count_3> <xpe_ucast_count_4> <xpe_ucast_count_5> <xpe_ucast_count_6> <xpe_ucast_count_7> <xpe_ucast_count_8> <xpe_ucast_count_9> <xpe_ucast_count_10> <mcast_count_1> <mcast_count_2> <mcast_count_3> <mcast_count_4> <mcast_count_5> <mcast_count_6> <mcast_count_7> <mcast_count_8> <mcast_count_9> <mcast_count_10> <xpe_a_mcast_count_1> <xpe_b_mcast_count_1> <xpe_mcast_count_2> <xpe_mcast_count_3> <xpe_mcast_count_4> <xpe_mcast_count_5> <xpe_mcast_count_6> <xpe_mcast_count_7> <xpe_mcast_count_8> <xpe_mcast_count_9> <xpe_mcast_count_10> } } ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

buffer

System buffer information

info

Buffer specific information

pkt-stats

Per port - Per Queue stats information

module

(Optional) Slot/module

module

(Optional) Slot/module number

instance

(Optional) ASIC Instance Number

instance

(Optional) ASIC Instance Number in Decimal

brief

(Optional) Show only system buffer stats

detail

(Optional) Show detailed statistics

peak

(Optional) Show peak buffer usage statistics

port-log

(Optional) Show cell usage threshold port log

port-stuck-log

(Optional) Show port stuck monitor log

asic-port

(Optional) Select a hardware/asic port

port

(Optional) Hardware asic port number

threshold

(Optional) Show per port buffer threshold

carving

(Optional) Buffer Carving information

cpu

(Optional) CPU Queue stats information

__readonly__

(Optional) Read Only

TABLE_instance

(Optional) Instance

instance

(Optional) Asic Instance

supports_8q

(Optional) Supports 8 user qos-groups

port_logs

(Optional) Port-Log

port_stuck_logs

(Optional) Port-Stuck-Log

cpu_start

(Optional) Header Display for instant cell usage for CPU port queues

cpu

(Optional) CPU

cpu_xpe_a

(Optional) CPU_XPE_A

cpu_xpe_b

(Optional) CPU_XPE_B

port_threshold

(Optional) Port-Threshold

total_instant_usage_1

(Optional) Total Instant Usage for service pool 1

rem_instant_usage_1

(Optional) Remaining Instant Usage for service pool 1

max_cell_usage_1

(Optional) Max Cell Usage for service pool 1

switch_cell_count_1

(Optional) Switch Cell Count for service pool 1

total_instant_usage_2

(Optional) Total Instant Usage for service pool 2

rem_instant_usage_2

(Optional) Remaining Instant Usage for service pool 2

max_cell_usage_2

(Optional) Max Cell Usage for service pool 2

switch_cell_count_2

(Optional) Switch Cell Count for service pool 2

total_instant_usage_3

(Optional) Total Instant Usage for service pool 3

rem_instant_usage_3

(Optional) Remaining Instant Usage for service pool 3

max_cell_usage_3

(Optional) Max Cell Usage for service pool 3

switch_cell_count_3

(Optional) Switch Cell Count for service pool 3

total_instant_usage_4

(Optional) Total Instant Usage for service pool 4

rem_instant_usage_4

(Optional) Remaining Instant Usage for service pool 4

max_cell_usage_4

(Optional) Max Cell Usage for service pool 4

switch_cell_count_4

(Optional) Switch Cell Count for service pool 4

switch_cell_count_4_detail

(Optional) Switch Cell Count for service pool 4

xpe_r_a_instant_usage_1

(Optional) Slice-R, XPE-A Instant Usage for service pool 1

xpe_r_b_instant_usage_1

(Optional) Slice-R, XPE-B Instant Usage for service pool 1

xpe_s_a_instant_usage_1

(Optional) Slice-S, XPE-A Instant Usage for service pool 1

xpe_s_b_instant_usage_1

(Optional) Slice-S, XPE-B Instant Usage for service pool 1

xpe_r_a_instant_usage_4

(Optional) Slice-R, XPE-A Instant Usage for service pool 4

xpe_r_b_instant_usage_4

(Optional) Slice-R, XPE-B Instant Usage for service pool 4

xpe_s_a_instant_usage_4

(Optional) Slice-S, XPE-A Instant Usage for service pool 4

xpe_s_b_instant_usage_4

(Optional) Slice-S, XPE-B Instant Usage for service pool 4

xpe_r_a_rem_instant_usage_1

(Optional) Slice-R, XPE-A Remaining Instant Usage for service pool 1

xpe_r_b_rem_instant_usage_1

(Optional) Slice-R, XPE-B Remaining Instant Usage for service pool 1

xpe_s_a_rem_instant_usage_1

(Optional) Slice-S, XPE-A Remaining Instant Usage for service pool 1

xpe_s_b_rem_instant_usage_1

(Optional) Slice-S, XPE-B Remaining Instant Usage for service pool 1

xpe_r_a_rem_instant_usage_4

(Optional) Slice-R, XPE-A Remaining Instant Usage for service pool 4

xpe_r_b_rem_instant_usage_4

(Optional) Slice-R, XPE-B Remaining Instant Usage for service pool 4

xpe_s_a_rem_instant_usage_4

(Optional) Slice-S, XPE-A Remaining Instant Usage for service pool 4

xpe_s_b_rem_instant_usage_4

(Optional) Slice-S, XPE-B Remaining Instant Usage for service pool 4

xpe_r_a_max_cell_usage_1

(Optional) Max Cell Usage for service pool 1

xpe_r_b_max_cell_usage_1

(Optional) Max Cell Usage for service pool 1

xpe_s_a_max_cell_usage_1

(Optional) Max Cell Usage for service pool 1

xpe_s_b_max_cell_usage_1

(Optional) Max Cell Usage for service pool 1

xpe_r_a_max_cell_usage_4

(Optional) Max Cell Usage for service pool 4

xpe_r_b_max_cell_usage_4

(Optional) Max Cell Usage for service pool 4

xpe_s_a_max_cell_usage_4

(Optional) Max Cell Usage for service pool 4

xpe_s_b_max_cell_usage_4

(Optional) Max Cell Usage for service pool 4

xpe_r_a_switch_cell_count_1

(Optional) Switch Cell Count for service pool 1

xpe_r_b_switch_cell_count_1

(Optional) Switch Cell Count for service pool 1

xpe_s_a_switch_cell_count_1

(Optional) Switch Cell Count for service pool 1

xpe_s_b_switch_cell_count_1

(Optional) Switch Cell Count for service pool 1

xpe_r_a_switch_cell_count_4

(Optional) Switch Cell Count for service pool 4

xpe_r_b_switch_cell_count_4

(Optional) Switch Cell Count for service pool 4

xpe_s_a_switch_cell_count_4

(Optional) Switch Cell Count for service pool 4

xpe_s_b_switch_cell_count_4

(Optional) Switch Cell Count for service pool 4

TABLE_interface

(Optional) Interface

stats_start

(Optional) Header Display for instant stats

peak_stats_start

(Optional) Header Display for peak stats

front_port

(Optional) Front Port

ucast_count_1

(Optional) Unicast Count Queue 1

ucast_count_2

(Optional) Unicast Count Queue 2

ucast_count_3

(Optional) Unicast Count Queue 3

ucast_count_4

(Optional) Unicast Count Queue 4

ucast_count_5

(Optional) Unicast Count Queue 5

ucast_count_6

(Optional) Unicast Count Queue 6

ucast_count_7

(Optional) Unicast Count Queue 7

ucast_count_8

(Optional) Unicast Count Queue 8

ucast_count_9

(Optional) Unicast Count Queue 9

ucast_count_10

(Optional) Unicast Count Queue 10

xpe_a_ucast_count_1

(Optional) xpe_a Unicast Count Queue 1

xpe_b_ucast_count_1

(Optional) xpe_b_Unicast Count Queue 1

xpe_ucast_count_2

(Optional) Unicast Count Queue 2

xpe_ucast_count_3

(Optional) Unicast Count Queue 3

xpe_ucast_count_4

(Optional) Unicast Count Queue 4

xpe_ucast_count_5

(Optional) Unicast Count Queue 5

xpe_ucast_count_6

(Optional) Unicast Count Queue 6

xpe_ucast_count_7

(Optional) Unicast Count Queue 7

xpe_ucast_count_8

(Optional) Unicast Count Queue 8

xpe_ucast_count_9

(Optional) Unicast Count Queue 9

xpe_ucast_count_10

(Optional) Unicast Count Queue 10

mcast_count_1

(Optional) Multicast Count Queue 1

mcast_count_2

(Optional) Multicast Count Queue 2

mcast_count_3

(Optional) Multicast Count Queue 3

mcast_count_4

(Optional) Multicast Count Queue 4

mcast_count_5

(Optional) Multicast Count Queue 5

mcast_count_6

(Optional) Multicast Count Queue 6

mcast_count_7

(Optional) Multicast Count Queue 7

mcast_count_8

(Optional) Multicast Count Queue 8

mcast_count_9

(Optional) Multicast Count Queue 9

mcast_count_10

(Optional) Multicast Count Queue 10

xpe_a_mcast_count_1

(Optional) Multicast Count Queue 1

xpe_b_mcast_count_1

(Optional) Multicast Count Queue 1

xpe_mcast_count_2

(Optional) Multicast Count Queue 2

xpe_mcast_count_3

(Optional) Multicast Count Queue 3

xpe_mcast_count_4

(Optional) Multicast Count Queue 4

xpe_mcast_count_5

(Optional) Multicast Count Queue 5

xpe_mcast_count_6

(Optional) Multicast Count Queue 6

xpe_mcast_count_7

(Optional) Multicast Count Queue 7

xpe_mcast_count_8

(Optional) Multicast Count Queue 8

xpe_mcast_count_9

(Optional) Multicast Count Queue 9

xpe_mcast_count_10

(Optional) Multicast Count Queue 10

Command Mode

- /exec

show hardware internal buffer info pkt-stats input

show hardware internal buffer info pkt-stats input [ module <module> ] [ instance <instance> ] [ peak ] [ detail ] [ __readonly__ { TABLE_instance <instance> <total_instant_usage_0> <rem_instant_usage_0> <max_cell_usage_0> <switch_cell_count_0> <hdrm_pool_count_0> <hdrm_pool_peak_count_0> <sp_count_1> <sp_count_2> <sp_count_3> <xpe_r_a_total_instant_usage_0> <xpe_r_a_rem_instant_usage_0> <xpe_r_a_max_cell_usage_0> <xpe_r_a_switch_cell_count_0> <xpe_r_a_hdrm_pool_count_0> <xpe_r_a_hdrm_pool_peak_count_0> <xpe_s_b_hdrm_pool_peak_count_0> <sp0_xpe_r_b_count> <sp0_xpe_s_a_count> <sp0_xpe_s_b_count> <sp3_xpe_r_a_count> <sp3_xpe_r_b_count> <sp3_xpe_s_a_count> <sp3_xpe_s_b_count> { TABLE_interface <stats_start> <peak_stats_start> <front_port> <front_port_slice_r> <front_port_slice_s> <pg_min_count_0> <pg_shared_count_0> <pg_hdrm_count_0> <pg_glb_hdrm_count_0> <pg_shared_peak_count_0> <pg_hdrm_peak_count_0> <pg_count_1> <pg_count_2> <pg_count_3> <pg_count_4> <pg_count_5> <pg_count_6> <pg_count_7> <sp_usage_min> <sp_usage_shared> <sp_usage_peak> } } ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

buffer

System buffer information

info

Buffer specific information

pkt-stats

Per Port - Per PG stats information

input

Input Per port - Per PG buffer stats information

module

(Optional) Slot/module

module

(Optional) Slot/module number

instance

(Optional) ASIC Instance Number

instance

(Optional) ASIC Instance Number in Decimal

detail

(Optional) Show detailed statistics

peak

(Optional) Show peak buffer usage statistics

__readonly__

(Optional) Read Only

TABLE_instance

(Optional) Instance

instance

(Optional) Asic Instance

total_instant_usage_0

(Optional) Total Instant Usage

rem_instant_usage_0

(Optional) Remaining Instant Usage

max_cell_usage_0

(Optional) Max Cell Usage

switch_cell_count_0

(Optional) Switch Cell Count

hdrm_pool_count_0

(Optional) Hdrm pool Count

hdrm_pool_peak_count_0

(Optional) Hdrm pool peak_Count

sp_count_1

(Optional) Service Pool 1 count

sp_count_2

(Optional) Service Pool 2 count

sp_count_3

(Optional) Service Pool 3 count

xpe_r_a_total_instant_usage_0

(Optional) Total Instant Usage

xpe_r_a_rem_instant_usage_0

(Optional) Remaining Instant Usage

xpe_r_a_max_cell_usage_0

(Optional) Max Cell Usage

xpe_r_a_switch_cell_count_0

(Optional) Switch Cell Count

xpe_r_a_hdrm_pool_count_0

(Optional) Hdrm pool Count

xpe_r_a_hdrm_pool_peak_count_0

(Optional) Hdrm pool peak_Count

xpe_s_b_hdrm_pool_peak_count_0

(Optional) Hdrm pool peak_Count

sp0_xpe_r_b_count

(Optional) XPE_R_B_Service Pool 0 count

sp0_xpe_s_a_count

(Optional) XPE_S_A_Service Pool 0 count

sp0_xpe_s_b_count

(Optional) XPE_S_B_Service Pool 0 count

sp3_xpe_r_a_count

(Optional) XPE_R_A_Service Pool 3 count

sp3_xpe_r_b_count

(Optional) XPE_R B_Service Pool 3 count

sp3_xpe_s_a_count

(Optional) XPE_S_A_Service Pool 3 count

sp3_xpe_s_b_count

(Optional) XPE_S_B_Service Pool 3 count

TABLE_interface

(Optional) Interface

stats_start

(Optional) Header Display

peak_stats_start

(Optional) Peak Header Display

front_port

(Optional) Front Port

front_port_slice_r

(Optional) Front Port_slice_r

front_port_slice_s

(Optional) Front Port_slice_s

pg_min_count_0

(Optional) Priority Group 0 min count

pg_shared_count_0

(Optional) Priority Group 0 shared count

pg_hdrm_count_0

(Optional) Priority Group 0 headroom count

pg_glb_hdrm_count_0

(Optional) Priority Group 0 global headroom count

pg_shared_peak_count_0

(Optional) Priority Group 0 shared peak count

pg_hdrm_peak_count_0

(Optional) Priority Group 0 headroom peak count

pg_count_1

(Optional) Priority Group 1 count

pg_count_2

(Optional) Priority Group 2 count

pg_count_3

(Optional) Priority Group 3 count

pg_count_4

(Optional) Priority Group 4 count

pg_count_5

(Optional) Priority Group 5 count

pg_count_6

(Optional) Priority Group 6 count

pg_count_7

(Optional) Priority Group 7 count

sp_usage_min

(Optional) Service pool min count

sp_usage_shared

(Optional) Service pool shared count

sp_usage_peak

(Optional) Service pool peak count

Command Mode

- /exec

show hardware internal buffer info tah-pkt-stats

show hardware internal buffer info tah-pkt-stats [ input ] [ module <module> ] [ instance <instance> ] [ port <port> ] [ subport <subport> ] [ brief | detail | peak ] [ __readonly__ { TABLE_ingress_buf <instance> <inst_total_cell> <inst_used_cell> <inst_free_cell> { TABLE_ingress_buf_per_inst <port> <subport> <qos0_instant_usage> <qos1_instant_usage> <qos2_instant_usage> <qos3_instant_usage> <qos4_instant_usage> <qos5_instant_usage> <qos6_instant_usage> <qos7_instant_usage> <port_instant_usage> <port_remain_usage> <port_peak_usage> } } { TABLE_instance <instance> <supports_8q> <total_instant_usage_drop_pg> <rem_instant_usage_drop_pg> <max_cell_usage_drop_pg> <switch_cell_count_drop_pg> <total_instant_usage_no_drop_pg> <rem_instant_usage_no_drop_pg> <max_cell_usage_no_drop_pg> <switch_cell_count_no_drop_pg> <total_instant_usage_cpu_pg> <rem_instant_usage_cpu_pg> <max_cell_usage_cpu_pg> <switch_cell_count_cpu_pg> <total_instant_usage_lcpu_pg> <rem_instant_usage_lcpu_pg> <max_cell_usage_lcpu_pg> <switch_cell_count_lcpu_pg> <total_instant_usage_rcpu_pg> <rem_instant_usage_rcpu_pg> <max_cell_usage_rcpu_pg> <switch_cell_count_rcpu_pg> <total_instant_usage_span_pg> <rem_instant_usage_span_pg> <max_cell_usage_span_pg> <switch_cell_count_span_pg> <total_instant_desc_usage_drop_pg> <rem_instant_desc_usage_drop_pg> <switch_desc_count_drop_pg> <total_instant_desc_usage_no_drop_pg> <rem_instant_desc_usage_no_drop_pg> <switch_desc_count_no_drop_pg> <total_instant_desc_usage_cpu_pg> <rem_instant_desc_usage_cpu_pg> <switch_desc_count_cpu_pg> <total_instant_desc_usage_lcpu_pg> <rem_instant_desc_usage_lcpu_pg> <switch_desc_count_lcpu_pg> <total_instant_desc_usage_rcpu_pg> <rem_instant_desc_usage_rcpu_pg> <switch_desc_count_rcpu_pg> <total_instant_desc_usage_span_pg> <rem_instant_desc_usage_span_pg> <switch_desc_count_span_pg> <ucpool_instant_usage_0> <ucpool_instant_desc_usage_0> <ucpool_max_cell_usage_0> <ucpool_instant_usage_1> <ucpool_instant_desc_usage_1> <ucpool_max_cell_usage_1> <ucpool_instant_usage_2> <ucpool_instant_desc_usage_2> <ucpool_max_cell_usage_2> <ucpool_instant_usage_3> <ucpool_instant_desc_usage_3> <ucpool_max_cell_usage_3> <ucpool_instant_usage_4> <ucpool_instant_desc_usage_4> <ucpool_max_cell_usage_4> <ucpool_instant_usage_5> <ucpool_instant_desc_usage_5> <ucpool_max_cell_usage_5> <ucpool_instant_usage_6> <ucpool_instant_desc_usage_6> <ucpool_max_cell_usage_6> <ucpool_instant_usage_7> <ucpool_instant_desc_usage_7> <ucpool_max_cell_usage_7> <mcpool_instant_usage_0> <mcpool_instant_desc_usage_0> <mcpool_instant_inq_usage_0> <mcpool_instant_pkts_usage_0> <mcpool_max_cell_usage_0> <mcpool_instant_usage_1> <mcpool_instant_desc_usage_1> <mcpool_instant_inq_usage_1> <mcpool_instant_pkts_usage_1> <mcpool_max_cell_usage_1> <mcpool_instant_usage_2> <mcpool_instant_desc_usage_2> <mcpool_instant_inq_usage_2> <mcpool_instant_pkts_usage_2> <mcpool_max_cell_usage_2> <mcpool_instant_usage_3> <mcpool_instant_desc_usage_3> <mcpool_instant_inq_usage_3> <mcpool_instant_pkts_usage_3> <mcpool_max_cell_usage_3> <mcpool_instant_usage_4> <mcpool_instant_desc_usage_4> <mcpool_instant_inq_usage_4> <mcpool_instant_pkts_usage_4> <mcpool_max_cell_usage_4> <mcpool_instant_usage_5> <mcpool_instant_desc_usage_5> <mcpool_instant_inq_usage_5> <mcpool_instant_pkts_usage_5> <mcpool_max_cell_usage_5> <mcpool_instant_usage_6> <mcpool_instant_desc_usage_6> <mcpool_instant_inq_usage_6> <mcpool_instant_pkts_usage_6> <mcpool_max_cell_usage_6> <mcpool_instant_usage_7> <mcpool_instant_desc_usage_7> <mcpool_instant_inq_usage_7> <mcpool_instant_pkts_usage_7> <mcpool_max_cell_usage_7> { TABLE_detail <egr_port> <port_uc_cells_q0> <port_mc_cells_q0> <port_mc_desc_q0> <port_uc_cells_q1> <port_mc_cells_q1> <port_mc_desc_q1> <port_uc_cells_q2> <port_mc_cells_q2> <port_mc_desc_q2> <port_uc_cells_q3> <port_mc_cells_q3> <port_mc_desc_q3> <port_uc_cells_q4> <port_mc_cells_q4> <port_mc_desc_q4> <port_uc_cells_q5> <port_mc_cells_q5> <port_mc_desc_q5> <port_uc_cells_q6> <port_mc_cells_q6> <port_mc_desc_q6> <port_uc_cells_q7> <port_mc_cells_q7> <port_mc_desc_q7> } { TABLE_peak <peak_drop_pg> <peak_no_drop_pg> <peak_mc_pool_0> <peak_mc_pool_1> <peak_mc_pool_2> <peak_mc_pool_3> <peak_mc_pool_4> <peak_mc_pool_5> <peak_mc_pool_6> <peak_mc_pool_7> <peak_uc_pool_0> <peak_uc_pool_1> <peak_uc_pool_2> <peak_uc_pool_3> <peak_uc_pool_4> <peak_uc_pool_5> <peak_uc_pool_6> <peak_uc_pool_7> <oport> <count_0> <count_1> } } ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

buffer

System buffer information

info

Buffer specific information

tah-pkt-stats

Per port - Per Queue stats information

input

(Optional) Input buffer stats

module

(Optional) Slot/module

module

(Optional) Slot/module number

instance

(Optional) ASIC Instance Number

instance

(Optional) ASIC Instance Number in Decimal

port

(Optional) Front port

port

(Optional) Front port number

subport

(Optional) Breakout sub port

subport

(Optional) Breakout sub port number

brief

(Optional) Show only system buffer stats

detail

(Optional) Show detailed system buffer stats

peak

(Optional) Show peak buffer stats

__readonly__

(Optional) Read Only

TABLE_ingress_buf

(Optional) Ingress Buffer Info

instance

(Optional) Asic Instance

inst_total_cell

(Optional) instane total cell allocated

inst_used_cell

(Optional) instance instant cell usage

inst_free_cell

(Optional) instance instant cell remaining

TABLE_ingress_buf_per_inst

(Optional) Per Instance Ingress Buffer Info

port

(Optional) Front port

subport

(Optional) Front breakout subport

qos0_instant_usage

(Optional) qos0 instant cell usage

qos1_instant_usage

(Optional) qos1 instant cell usage

qos2_instant_usage

(Optional) qos2 instant cell usage

qos3_instant_usage

(Optional) qos3 instant cell usage

qos4_instant_usage

(Optional) qos4 instant cell usage

qos5_instant_usage

(Optional) qos5 instant cell usage

qos6_instant_usage

(Optional) qos6 instant cell usage

qos7_instant_usage

(Optional) qos7 instant cell usage

port_instant_usage

(Optional) port instant cell usage

port_remain_usage

(Optional) port remain cell usage

port_peak_usage

(Optional) port peak cell usage

TABLE_instance

(Optional) Instance

instance

(Optional) Asic Instance

supports_8q

(Optional) Supports 8 user qos-groups

total_instant_usage_drop_pg

(Optional) Total Instant Usage for drop pool-group

rem_instant_usage_drop_pg

(Optional) Remaining Instant Usage for drop pool-group

max_cell_usage_drop_pg

(Optional) Max Cell Usage for drop pool-group

switch_cell_count_drop_pg

(Optional) Switch Cell Count for drop pool-group

total_instant_usage_no_drop_pg

(Optional) Total Instant Usage for no-drop pool-group

rem_instant_usage_no_drop_pg

(Optional) Remaining Instant Usage for no-drop pool-group

max_cell_usage_no_drop_pg

(Optional) Max Cell Usage for no-drop pool-group

switch_cell_count_no_drop_pg

(Optional) Switch Cell Count for no-drop pool-group

total_instant_usage_cpu_pg

(Optional) Total Instant Usage for cpu pool-group

rem_instant_usage_cpu_pg

(Optional) Remaining Instant Usage for cpu pool-group

max_cell_usage_cpu_pg

(Optional) Max Cell Usage for cpu pool-group

switch_cell_count_cpu_pg

(Optional) Switch Cell Count for cpu pool-group

total_instant_usage_lcpu_pg

(Optional) Total Instant Usage for lcpu pool-group

rem_instant_usage_lcpu_pg

(Optional) Remaining Instant Usage for lcpu pool-group

max_cell_usage_lcpu_pg

(Optional) Max Cell Usage for lcpu pool-group

switch_cell_count_lcpu_pg

(Optional) Switch Cell Count for lcpu pool-group

total_instant_usage_rcpu_pg

(Optional) Total Instant Usage for rcpu pool-group

rem_instant_usage_rcpu_pg

(Optional) Remaining Instant Usage for rcpu pool-group

max_cell_usage_rcpu_pg

(Optional) Max Cell Usage for rcpu pool-group

switch_cell_count_rcpu_pg

(Optional) Switch Cell Count for rcpu pool-group

total_instant_usage_span_pg

(Optional) Total Instant Usage for span pool-group

rem_instant_usage_span_pg

(Optional) Remaining Instant Usage for span pool-group

max_cell_usage_span_pg

(Optional) Max Cell Usage for span pool-group

switch_cell_count_span_pg

(Optional) Switch Cell Count for span pool-group

total_instant_desc_usage_drop_pg

(Optional) Total Instant Desc Usage for drop pool-group

rem_instant_desc_usage_drop_pg

(Optional) Remaining Instant Desc Usage for drop pool-group

switch_desc_count_drop_pg

(Optional) Switch Desc Count for drop pool-group

total_instant_desc_usage_no_drop_pg

(Optional) Total Instant Desc Usage for no-drop pool-group

rem_instant_desc_usage_no_drop_pg

(Optional) Remaining Instant Desc Usage for no-drop pool-group

switch_desc_count_no_drop_pg

(Optional) Switch Desc Count for no-drop pool-group

total_instant_desc_usage_cpu_pg

(Optional) Total Instant Desc Usage for cpu pool-group

rem_instant_desc_usage_cpu_pg

(Optional) Remaining Instant Desc Usage for cpu pool-group

switch_desc_count_cpu_pg

(Optional) Switch Desc Count for cpu pool-group

total_instant_desc_usage_lcpu_pg

(Optional) Total Instant Desc Usage for lcpu pool-group

rem_instant_desc_usage_lcpu_pg

(Optional) Remaining Instant Desc Usage for lcpu pool-group

switch_desc_count_lcpu_pg

(Optional) Switch Desc Count for lcpu pool-group

total_instant_desc_usage_rcpu_pg

(Optional) Total Instant Desc Usage for rcpu pool-group

rem_instant_desc_usage_rcpu_pg

(Optional) Remaining Instant Desc Usage for rcpu pool-group

switch_desc_count_rcpu_pg

(Optional) Switch Desc Count for rcpu pool-group

total_instant_desc_usage_span_pg

(Optional) Total Instant Desc Usage for span pool-group

rem_instant_desc_usage_span_pg

(Optional) Remaining Instant Desc Usage for span pool-group

switch_desc_count_span_pg

(Optional) Switch Desc Count for span pool-group

ucpool_instant_usage_0

(Optional) Total Instant Usage for UC pool 0

ucpool_instant_desc_usage_0

(Optional) Total Instant Desc Usage for UC pool 0

ucpool_max_cell_usage_0

(Optional) Max Cell Usage for UC pool 0

ucpool_instant_usage_1

(Optional) Total Instant Usage for UC pool 1

ucpool_instant_desc_usage_1

(Optional) Total Instant Desc Usage for UC pool 1

ucpool_max_cell_usage_1

(Optional) Max Cell Usage for UC pool 1

ucpool_instant_usage_2

(Optional) Total Instant Usage for UC pool 2

ucpool_instant_desc_usage_2

(Optional) Total Instant Desc Usage for UC pool 2

ucpool_max_cell_usage_2

(Optional) Max Cell Usage for UC pool 2

ucpool_instant_usage_3

(Optional) Total Instant Usage for UC pool 3

ucpool_instant_desc_usage_3

(Optional) Total Instant Desc Usage for UC pool 3

ucpool_max_cell_usage_3

(Optional) Max Cell Usage for UC pool 3

ucpool_instant_usage_4

(Optional) Total Instant Usage for UC pool 4

ucpool_instant_desc_usage_4

(Optional) Total Instant Desc Usage for UC pool 4

ucpool_max_cell_usage_4

(Optional) Max Cell Usage for UC pool 4

ucpool_instant_usage_5

(Optional) Total Instant Usage for UC pool 5

ucpool_instant_desc_usage_5

(Optional) Total Instant Desc Usage for UC pool 5

ucpool_max_cell_usage_5

(Optional) Max Cell Usage for UC pool 5

ucpool_instant_usage_6

(Optional) Total Instant Usage for UC pool 6

ucpool_instant_desc_usage_6

(Optional) Total Instant Desc Usage for UC pool 6

ucpool_max_cell_usage_6

(Optional) Max Cell Usage for UC pool 6

ucpool_instant_usage_7

(Optional) Total Instant Usage for UC pool 7

ucpool_instant_desc_usage_7

(Optional) Total Instant Desc Usage for UC pool 7

ucpool_max_cell_usage_7

(Optional) Max Cell Usage for UC pool 7

mcpool_instant_usage_0

(Optional) Total Instant Usage for MC pool 0

mcpool_instant_desc_usage_0

(Optional) Total Instant Desc Usage for MC pool 0

mcpool_instant_inq_usage_0

(Optional) Total Instant Inq Usage for MC pool 0

mcpool_instant_pkts_usage_0

(Optional) Total Instant Pkts Usage for MC pool 0

mcpool_max_cell_usage_0

(Optional) Max Cell Usage for MC pool 0

mcpool_instant_usage_1

(Optional) Total Instant Usage for MC pool 1

mcpool_instant_desc_usage_1

(Optional) Total Instant Desc Usage for MC pool 1

mcpool_instant_inq_usage_1

(Optional) Total Instant Inq Usage for MC pool 1

mcpool_instant_pkts_usage_1

(Optional) Total Instant Pkts Usage for MC pool 1

mcpool_max_cell_usage_1

(Optional) Max Cell Usage for MC pool 1

mcpool_instant_usage_2

(Optional) Total Instant Usage for MC pool 2

mcpool_instant_desc_usage_2

(Optional) Total Instant Desc Usage for MC pool 2

mcpool_instant_inq_usage_2

(Optional) Total Instant Inq Usage for MC pool 2

mcpool_instant_pkts_usage_2

(Optional) Total Instant Pkts Usage for MC pool 2

mcpool_max_cell_usage_2

(Optional) Max Cell Usage for MC pool 2

mcpool_instant_usage_3

(Optional) Total Instant Usage for MC pool 3

mcpool_instant_desc_usage_3

(Optional) Total Instant Desc Usage for MC pool 3

mcpool_instant_inq_usage_3

(Optional) Total Instant Inq Usage for MC pool 3

mcpool_instant_pkts_usage_3

(Optional) Total Instant Pkts Usage for MC pool 3

mcpool_max_cell_usage_3

(Optional) Max Cell Usage for MC pool 3

mcpool_instant_usage_4

(Optional) Total Instant Usage for MC pool 4

mcpool_instant_desc_usage_4

(Optional) Total Instant Desc Usage for MC pool 4

mcpool_instant_inq_usage_4

(Optional) Total Instant Inq Usage for MC pool 4

mcpool_instant_pkts_usage_4

(Optional) Total Instant Pkts Usage for MC pool 4

mcpool_max_cell_usage_4

(Optional) Max Cell Usage for MC pool 4

mcpool_instant_usage_5

(Optional) Total Instant Usage for MC pool 5

mcpool_instant_desc_usage_5

(Optional) Total Instant Desc Usage for MC pool 5

mcpool_instant_inq_usage_5

(Optional) Total Instant Inq Usage for MC pool 5

mcpool_instant_pkts_usage_5

(Optional) Total Instant Pkts Usage for MC pool 5

mcpool_max_cell_usage_5

(Optional) Max Cell Usage for MC pool 5

mcpool_instant_usage_6

(Optional) Total Instant Usage for MC pool 6

mcpool_instant_desc_usage_6

(Optional) Total Instant Desc Usage for MC pool 6

mcpool_instant_inq_usage_6

(Optional) Total Instant Inq Usage for MC pool 6

mcpool_instant_pkts_usage_6

(Optional) Total Instant Pkts Usage for MC pool 6

mcpool_max_cell_usage_6

(Optional) Max Cell Usage for MC pool 6

mcpool_instant_usage_7

(Optional) Total Instant Usage for MC pool 7

mcpool_instant_desc_usage_7

(Optional) Total Instant Desc Usage for MC pool 7

mcpool_instant_inq_usage_7

(Optional) Total Instant Inq Usage for MC pool 7

mcpool_instant_pkts_usage_7

(Optional) Total Instant Pkts Usage for MC pool 7

mcpool_max_cell_usage_7

(Optional) Max Cell Usage for MC pool 7

TABLE_detail

(Optional) Detailed per port buffer info

egr_port

(Optional) Egress Port

port_uc_cells_q0

(Optional) UC cell usage for queue 0

port_mc_cells_q0

(Optional) MC cell usage for queue 0

port_mc_desc_q0

(Optional) MC desc usage for queue 0

port_uc_cells_q1

(Optional) UC cell usage for queue 1

port_mc_cells_q1

(Optional) MC cell usage for queue 1

port_mc_desc_q1

(Optional) MC desc usage for queue 1

port_uc_cells_q2

(Optional) UC cell usage for queue 2

port_mc_cells_q2

(Optional) MC cell usage for queue 2

port_mc_desc_q2

(Optional) MC desc usage for queue 2

port_uc_cells_q3

(Optional) UC cell usage for queue 3

port_mc_cells_q3

(Optional) MC cell usage for queue 3

port_mc_desc_q3

(Optional) MC desc usage for queue 3

port_uc_cells_q4

(Optional) UC cell usage for queue 4

port_mc_cells_q4

(Optional) MC cell usage for queue 4

port_mc_desc_q4

(Optional) MC desc usage for queue 4

port_uc_cells_q5

(Optional) UC cell usage for queue 5

port_mc_cells_q5

(Optional) MC cell usage for queue 5

port_mc_desc_q5

(Optional) MC desc usage for queue 5

port_uc_cells_q6

(Optional) UC cell usage for queue 6

port_mc_cells_q6

(Optional) MC cell usage for queue 6

port_mc_desc_q6

(Optional) MC desc usage for queue 6

port_uc_cells_q7

(Optional) UC cell usage for queue 7

port_mc_cells_q7

(Optional) MC cell usage for queue 7

port_mc_desc_q7

(Optional) MC desc usage for queue 7

TABLE_peak

(Optional) Detailed per port peak info

peak_drop_pg

(Optional) Peak usage for drop pool-group

peak_no_drop_pg

(Optional) Peak usage for no-drop pool-group

peak_mc_pool_0

(Optional) Peak usage for MC pool 0

peak_mc_pool_1

(Optional) Peak usage for MC pool 1

peak_mc_pool_2

(Optional) Peak usage for MC pool 2

peak_mc_pool_3

(Optional) Peak usage for MC pool 3

peak_mc_pool_4

(Optional) Peak usage for MC pool 4

peak_mc_pool_5

(Optional) Peak usage for MC pool 5

peak_mc_pool_6

(Optional) Peak usage for MC pool 6

peak_mc_pool_7

(Optional) Peak usage for MC pool 7

peak_uc_pool_0

(Optional) Peak usage for UC pool 0

peak_uc_pool_1

(Optional) Peak usage for UC pool 1

peak_uc_pool_2

(Optional) Peak usage for UC pool 2

peak_uc_pool_3

(Optional) Peak usage for UC pool 3

peak_uc_pool_4

(Optional) Peak usage for UC pool 4

peak_uc_pool_5

(Optional) Peak usage for UC pool 5

peak_uc_pool_6

(Optional) Peak usage for UC pool 6

peak_uc_pool_7

(Optional) Peak usage for UC pool 7

oport

(Optional) Output port

count_0

(Optional) Peak usage counter 0 for port

count_1

(Optional) Peak usage counter 1 for port

Command Mode

- /exec

show hardware internal buffer poll-interval

show hardware internal buffer poll-interval [ module <module> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

buffer

System buffer information

poll-interval

System buffer status polling interval

module

(Optional) Slot/module

module

(Optional) Slot/module number

Command Mode

- /exec

show hardware internal cpu-mac eobc counters

show hardware internal cpu-mac eobc counters

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

cpu-mac

Show CPU-MACs related information

eobc

Show EOBC port related information

counters

Show EOBC port counters

Command Mode

- /exec

show hardware internal cpu-mac eobc registers

show hardware internal cpu-mac eobc registers

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

cpu-mac

Show CPU-MACs related information

eobc

Show EOBC port related information

registers

Show EOBC port registers

Command Mode

- /exec

show hardware internal cpu-mac eobc stats

show hardware internal cpu-mac eobc stats

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

cpu-mac

Show CPU-MACs related information

eobc

Show EOBC port related information

stats

Show EOBC port statistics

Command Mode

- /exec

show hardware internal cpu-mac inband active-fm traffic-from-sup

show hardware internal cpu-mac inband active-fm traffic-from-sup

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

cpu-mac

Show CPU-MACs related information

inband

Show inband port related information

active-fm

Show active fabric module

traffic-from-sup

For Traffic from sup inband traffic

Command Mode

- /exec

show hardware internal cpu-mac inband active-fm traffic-to-sup

show hardware internal cpu-mac inband active-fm traffic-to-sup

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

cpu-mac

Show CPU-MACs related information

inband

Show inband port related information

active-fm

Show active fabric module

traffic-to-sup

For Traffic to sup inband traffic

Command Mode

- /exec

show hardware internal cpu-mac inband counters

show hardware internal cpu-mac inband counters

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

cpu-mac

Show CPU-MACs related information

inband

Show inband port related information

counters

Show inband port counters

Command Mode

- /exec

show hardware internal cpu-mac inband registers

show hardware internal cpu-mac inband registers

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

cpu-mac

Show CPU-MACs related information

inband

Show inband port related information

registers

Show inband port registers

Command Mode

- /exec

show hardware internal cpu-mac inband stats

show hardware internal cpu-mac inband stats

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

cpu-mac

Show CPU-MACs related information

inband

Show inband port related information

stats

Show inband port statistics

Command Mode

- /exec

show hardware internal cpu-mac mgmt counters

show hardware internal cpu-mac mgmt counters

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

cpu-mac

Show CPU-MACs related information

mgmt

Show management port related information

counters

Show management port counters

Command Mode

- /exec

show hardware internal cpu-mac mgmt registers

show hardware internal cpu-mac mgmt registers

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

cpu-mac

Show CPU-MACs related information

mgmt

Show management port related information

registers

Show management port registers

Command Mode

- /exec

show hardware internal cpu-mac mgmt stats

show hardware internal cpu-mac mgmt stats

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

cpu-mac

Show CPU-MACs related information

mgmt

Show management port related information

stats

Show management port statistics

Command Mode

- /exec

show hardware internal cpu interface asic counters module instance

show hardware internal cpu interface asic counters module <module> instance <instance>

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

cpu

Show cpu interface counters

interface

Show interface status and information

asic

Show interface counters from asic for ex. from broadcom shell

counters

Show detailed interface counters

module

Slot/module

module

Slot/module number

instance

ASIC Instance Number

instance

ASIC Instance Number in Decimal

Command Mode

- /exec

show hardware internal dev-port-map

show hardware internal dev-port-map

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

dev-port-map

Show device port map

Command Mode

- /exec

show hardware internal dev-version

show hardware internal dev-version

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

dev-version

Show device versions

Command Mode

- /exec

show hardware internal dev-version details

show hardware internal dev-version details

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

dev-version

Show device versions

details

Check if versions are latest

Command Mode

- /exec

show hardware internal eobc stats

show hardware internal eobc stats

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

eobc

Show eobc related information

stats

Show statistics of eobc interface

Command Mode

- /exec

show hardware internal errors2

show hardware internal errors2 [ __readonly__ [ { TABLE_deviceinfo <device_name> <role> <mod> <last_cleared> <stat_category> [ { TABLE_instanceinfo <inst> [ { TABLE_counterinfo <counter_id> <counter_name> <counter_val> <ports> } ] } ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

errors2

Show hardware internal error information

__readonly__

(Optional)

TABLE_deviceinfo

(Optional) Shows device information

device_name

(Optional) Device name

role

(Optional) Device role

last_cleared

(Optional) Time the log was last cleared

stat_category

(Optional) Device statistics category

mod

(Optional) module

TABLE_instanceinfo

(Optional) Shows instance information

inst

(Optional) instance

TABLE_counterinfo

(Optional) Shows counter information

counter_id

(Optional) Counter Id

counter_name

(Optional) Counter name

counter_val

(Optional) Counter value

ports

(Optional) Port

Command Mode

- /exec

show hardware internal errors module

show hardware internal errors { module <module> | all } [ __readonly__ [ { TABLE_deviceinfo <device_name> <role> <mod> <last_cleared> <stat_category> [ { TABLE_instanceinfo <inst> [ { TABLE_counterinfo <counter_id> <counter_name> <counter_val> <ports> } ] } ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

errors

Show hardware internal error information

all

Show all hardware internal errors

module

Show hardware internal errors for a module

module

Module number

__readonly__

(Optional)

TABLE_deviceinfo

(Optional) Shows device information

device_name

(Optional) Device name

role

(Optional) Device role

last_cleared

(Optional) Time the log was last cleared

stat_category

(Optional) Device statistics category

mod

(Optional) module

TABLE_instanceinfo

(Optional) Shows instance information

inst

(Optional) instance

TABLE_counterinfo

(Optional) Shows counter information

counter_id

(Optional) Counter Id

counter_name

(Optional) Counter name

counter_val

(Optional) Counter value

ports

(Optional) Port

Command Mode

- /exec

show hardware internal fabric interface asic counters module

show hardware internal fabric interface asic counters module <module>

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

fabric

Show fabric interface counters

interface

Show interface status and information

asic

Show interface counters from asic

counters

Show interface counters into different buckets

module

Limit display to fabric interfaces on module

module

Slot/module number

Command Mode

- /exec

show hardware internal fabric interface asic counters module instance asic-port

show hardware internal fabric interface asic counters module <module> instance <instance> asic-port <port> [ snmp ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

fabric

Show fabric interface counters

interface

Show interface status and information

asic

Show interface counters from asic for ex. from broadcom shell

counters

Show detailed interface counters

module

Slot/module

module

Slot/module number

instance

ASIC Instance Number

instance

ASIC Instance Number in Decimal

asic-port

Select a hardware/asic port

port

Hardware asic port number

snmp

(Optional) Show snmp hardware/asic counters

Command Mode

- /exec

show hardware internal flow resource utilization

show hardware internal flow resource utilization [ table ] [ icam | ipv4 | ipv6 ] [ no-header ] [ instance <inst> ] [ module <num> ] [ __readonly__ TABLE_nf_resource_info <flow_util> <flow_used> <flow_free> <flow_fail> <icam_util> <icam_used> <icam_free> <ipv4_util> <ipv4_used> <ipv4_free> <ipv6_util> <ipv6_used> <ipv6_free> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

flow

Netflow Module

resource

Show resource information

utilization

Show utilization

table

(Optional) Flow table usage

icam

(Optional) ICAM usage

ipv4

(Optional) IPv4 masks usage

ipv6

(Optional) IPv6 masks usage

no-header

(Optional) Don't show header

instance

(Optional) Instance

inst

(Optional) Earl Instance

module

(Optional) Line card module

num

(Optional) slot number

__readonly__

(Optional)

TABLE_nf_resource_info

(Optional) netflow resource info

flow_util

(Optional) percentage of flow table used

flow_used

(Optional) flow table entries used

flow_free

(Optional) flow table entries free

flow_fail

(Optional) flow create failures

icam_util

(Optional) percentage of ICAM used

icam_used

(Optional) ICAM entries used

icam_free

(Optional) ICAM entries free

ipv4_util

(Optional) percentage of IPv4 masks used

ipv4_used

(Optional) ipv4 masks used

ipv4_free

(Optional) ipv4 masks free

ipv6_util

(Optional) percentage of IPv6 masks used

ipv6_used

(Optional) ipv6 masks used

ipv6_free

(Optional) ipv6 masks free

Command Mode

- /exec

show hardware internal forwarding adjacency statistics default-route

show hardware internal forwarding adjacency statistics default-route [ module <module> ]

Syntax Description

Syntax Description

show

SHOW_HELP

hardware

SHOW_HW_HELP

internal

SHOW_HW_INT_HELP

forwarding

Show hardware information for forwarding Asic

adjacency

display adjacency utilization

statistics

Show hardware statistics

default-route

For special adjacency of default route on linecards

module

(Optional) slot

module

(Optional) Slot/module number

Command Mode

- /exec

show hardware internal forwarding adjacency utilization

show hardware internal forwarding adjacency utilization [ no-header ] [ module <module> ] [ instance <instance> ] [ __readonly__ { <header> } [ <module> ] { TABLE_adjacency <adj_type> <used> <used_util> <free> <free_util> <total> } ]

Syntax Description

Syntax Description

show

SHOW_HELP

hardware

SHOW_HW_HELP

internal

SHOW_HW_INT_HELP

forwarding

Show hardware information for forwarding Asic

adjacency

display adjacency utilization

utilization

Show hardware utilization summary

no-header

(Optional) Do not print header

module

(Optional) slot

module

(Optional) Slot/module number

instance

(Optional) Asic Instance

instance

(Optional) ASIC instance number

__readonly__

(Optional)

header

(Optional) Header for subsequent information

module

(Optional) Module for which the information is displayed

TABLE_adjacency

(Optional) Table with adj types for which the information is displayed

adj_type

(Optional) Adjacency type

used

(Optional) Number of adjacency entries used

used_util

(Optional) Percentage usage of adjacency table entries

free

(Optional) Number of adjacency entries available

free_util

(Optional) Percentage availability of adjacency table entries

total

(Optional) Total number of adjacency entries

Command Mode

- /exec

show hardware internal forwarding l3 counters

show hardware internal forwarding l3 counters [ module <module> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware usage settings

internal

SHOW_HW_INT_HELP

forwarding

Show forwarding related settings

l3

Layer-3

counters

Show Layer-3 Counters

module

(Optional) Slot/module

module

(Optional) Slot/module number

Command Mode

- /exec

show hardware internal forwarding table utilization

show hardware internal forwarding table utilization [ no-header ] [ module <module> ] [ instance <instance> ] [ __readonly__ <header> [ <module> ] { TABLE_route <rt_type> <used_log> <used_phy> <util> <free_log> <free_phy> <free> <total_log> <total_phy> } ]

Syntax Description

Syntax Description

show

SHOW_HELP

hardware

SHOW_HW_HELP

internal

SHOW_HW_INT_HELP

forwarding

Show hardware information for forwarding Asic

table

FIB TCAM table utilization

utilization

FIB TCAM table utilization

no-header

(Optional) Do not print header

module

(Optional) slot

module

(Optional) Slot/module number

instance

(Optional) Asic Instance

instance

(Optional) ASIC instance number

__readonly__

(Optional)

header

(Optional) Header for subsequent information

module

(Optional) Module for which the information is displayed

TABLE_route

(Optional) Table with route types for which the information is displayed

rt_type

(Optional) Route types

used_log

(Optional) Number of logical entries used

used_phy

(Optional) Number of physical entries used

free_log

(Optional) Number of logical entries available

free_phy

(Optional) Number of physical entries available

total_log

(Optional) Total number of logical entries

total_phy

(Optional) Total number of physical entries

util

(Optional) Percentage utilization of routing table entries

free

(Optional) Percentage availability of routing table entries

Command Mode

- /exec

show hardware internal forwarding table utilization mib module

show hardware internal forwarding table utilization mib module <module> [ __readonly__ <counterString> <counterValue> ]

Syntax Description

Syntax Description

show

SHOW_HELP

hardware

SHOW_HW_HELP

internal

SHOW_HW_INT_HELP

forwarding

Show hardware information for forwarding Asic

table

FIB TCAM table utilization

utilization

FIB TCAM table utilization

mib

show mib

module

slot

module

Slot/module number

__readonly__

(Optional)

counterString

(Optional) counter string

counterValue

(Optional) counter value

Command Mode

- /exec

show hardware internal inband-rcpu cpu-queue slot

show hardware internal inband-rcpu cpu-queue [ name <queue-name> ] slot <slot-num> [ reset-stats ] [ reset-pps ]

Syntax Description

Syntax Description

show

commands to display

hardware

Show hardware information

internal

Show hardware internal information

inband-rcpu

BCM RCPU

cpu-queue

Show BCM RCPU cpu queue

name

(Optional) cpu queue name

queue-name

(Optional) name of the queue

slot

Slot/module

slot-num

Slot/module number

reset-stats

(Optional) Reset CPU Queue Stats

reset-pps

(Optional) Reset CPU Queue PPS

Command Mode

- /exec

show hardware internal interface asic counters

show hardware internal interface <ifeth_ctr_hw> asic counters [ snmp ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

interface

Show interface status and information

ifeth_ctr_hw

Enter interface type and number in module/slot format

asic

Show interface counters from asic for ex. from broadcom shell

counters

Show detailed interface counters

snmp

(Optional) Show snmp hardware/asic counters

Command Mode

- /exec

show hardware internal interface asic counters module

show hardware internal interface asic counters module <module>

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

interface

Show interface status and information

asic

Show interface counters from asic

counters

Show interface counters into different buckets

module

Limit display to interfaces on module

module

Enter module number

Command Mode

- /exec

show hardware internal logflash model

show hardware internal logflash model

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

logflash

Show logflash related information

model

Show logflash model name

Command Mode

- /exec

show hardware internal logflash model

show hardware internal logflash model

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

logflash

Show logflash related information

model

Show logflash model name

Command Mode

- /exec

show hardware internal memory-ecc statistics

show hardware internal memory-ecc statistics

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

memory-ecc

Show memory dram ecc error

statistics

Show memory dram ecc error statistics

Command Mode

- /exec

show hardware internal memory-model

show hardware internal memory-model

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

memory-model

Show memory dimm related information

Command Mode

- /exec

show hardware internal mgmt0 stats

show hardware internal mgmt0 stats

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

mgmt0

Show mgmt0 related information

stats

Show statistics of mgmt0 interface

Command Mode

- /exec

show hardware internal ns buffer info pkt-stats

show hardware internal ns buffer info pkt-stats [ input ] [ module <module> ] [ instance <instance> ] [ detail ] [ __readonly__ { TABLE_instance <instance> { TABLE_direction <direction> <total_instant_usage_0> <rem_instant_usage_0> <shared_cell_count_0> <total_cell_count_0> <sp_count_1> <sp_count_2> <sp_count_3> { TABLE_interface <stats_start> <front_port> <ucast_count_0> <ucast_count_1> <ucast_count_2> <ucast_count_3> <mcast_count_0> <mcast_count_1> <mcast_count_2> <mcast_count_3> <sup_count> <sup_na> } { TABLE_eoq <eoq_stats_start> <eoq_name> <eoq_count_0> <eoq_count_1> <eoq_count_2> <eoq_count_3> } } } ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

ns

Northstar

buffer

System buffer information

info

Buffer specific information

pkt-stats

Per Port per Pool buffer stats information

input

(Optional) Input buffer stats

module

(Optional) Slot/module

module

(Optional) Slot/module number

instance

(Optional) ASIC Instance Number

instance

(Optional) ASIC Instance Number in Decimal

detail

(Optional) Show detailed statistics

__readonly__

(Optional) Read Only

TABLE_instance

(Optional) Instance

instance

(Optional) Asic Instance

TABLE_direction

(Optional) Direction

direction

(Optional) Traffic Direction

total_instant_usage_0

(Optional) Total Instant Usage

rem_instant_usage_0

(Optional) Remaining Instant Usage

shared_cell_count_0

(Optional) Max Cell Usage

total_cell_count_0

(Optional) Total Cell Count

sp_count_1

(Optional) Service Pool 1 count

sp_count_2

(Optional) Service Pool 2 count

sp_count_3

(Optional) Service Pool 3 count

TABLE_interface

(Optional) Interface

stats_start

(Optional) Header Display

front_port

(Optional) Front Port

ucast_count_0

(Optional) Unicast Count Queue 0

ucast_count_1

(Optional) Unicast Count Queue 1

ucast_count_2

(Optional) Unicast Count Queue 2

ucast_count_3

(Optional) Unicast Count Queue 3

mcast_count_0

(Optional) Multicast Count Queue 0

mcast_count_1

(Optional) Multicast Count Queue 1

mcast_count_2

(Optional) Multicast Count Queue 2

mcast_count_3

(Optional) Multicast Count Queue 3

sup_count

(Optional) Sup Queue Count

sup_na

(Optional) Sup Queue Not Applicable

TABLE_eoq

(Optional) EOQ

eoq_stats_start

(Optional) Header Display

eoq_name

(Optional) Front Port

eoq_count_0

(Optional) EOQ Count Queue 0

eoq_count_1

(Optional) EOQ Count Queue 1

eoq_count_2

(Optional) EOQ Count Queue 2

eoq_count_3

(Optional) EOQ Count Queue 3

Command Mode

- /exec

show hardware internal ns interrupts

show hardware internal ns interrupts [ __readonly__ { TABLE_instance <asic> { TABLE_interrupts <reg> <reg_field> <inst> <count> <thresh_hit> <currently_set> } } ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

ns

Northstar

interrupts

Interrupts

__readonly__

(Optional) Read Only

TABLE_instance

(Optional) ASIC instance

asic

(Optional) ASIC instance

TABLE_interrupts

(Optional) Interrupts

reg

(Optional) Register name

reg_field

(Optional) Register Field name

inst

(Optional) Register instance

count

(Optional) Interrupt count

thresh_hit

(Optional) Threshold hit

currently_set

(Optional) Currently set

Command Mode

- /exec

show hardware internal plog errors

show hardware internal plog errors

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

plog

Configure plog debugging

errors

Show persistent logging errors

Command Mode

- /exec

show hardware internal plog msgs

show hardware internal plog msgs

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

plog

Configure plog debugging

msgs

Show persistent logging msgs

Command Mode

- /exec

show hardware internal plog print

show hardware internal plog print [ file-type <filetype> [ { count <count> } | { uuid <uuid> } ] ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

plog

Configure plog debugging

print

Show persistent error logs

file-type

(Optional) Show persistent error logs for file type

filetype

(Optional)

count

(Optional) Show last count persistent error logs

count

(Optional)

uuid

(Optional) Show persistent error logs of a specific uuid

uuid

(Optional)

Command Mode

- /exec

show hardware internal plog print list-file-types

show hardware internal plog print list-file-types

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

plog

Configure plog debugging

print

Show persistent error logs

list-file-types

List all file types available

Command Mode

- /exec

show hardware internal plog stat uuid

show hardware internal plog stat uuid <uuid>

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

plog

Configure plog debugging

stat

Show persistent logging statistics

uuid

Show persistent logging statistics of a specific uuid

uuid

Command Mode

- /exec

show hardware internal proc-info

show hardware internal proc-info <s0>

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

proc-info

Displays any file under /proc directory

s0

Enter file name or path after '/proc/

Command Mode

- /exec

show hardware internal sensor event-history errors

show hardware internal sensor event-history errors

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

sensor

Show sensor commands

event-history

Show sensor internal event history

errors

Show sensor internal error history

Command Mode

- /exec

show hardware internal sensor event-history msgs

show hardware internal sensor event-history msgs

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

sensor

Show sensor commands

event-history

Show sensor internal event history

msgs

Show sensor internal message history

Command Mode

- /exec

show hardware internal sensor mem-stats

show hardware internal sensor mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

sensor

Show sensor commands

mem-stats

Show memory allocation statistics for sensor

detail

(Optional) Show detailed stats

Command Mode

- /exec

show hardware internal sprom event-log

show hardware internal sprom event-log

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

sprom

Show sprom internal information

event-log

Show sprom driver event-log

Command Mode

- /exec

show hardware internal statistics module-all pktflow all

show hardware internal statistics module-all pktflow all

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

statistics

Shows stats Information

module-all

Shows stats of all modules

pktflow

Shows pktflow stats

all

show packetflow boundary stats from all devices

Command Mode

- /exec

show hardware internal statistics module-all pktflow rates

show hardware internal statistics module-all pktflow rates

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

statistics

Shows stats Information

module-all

Shows stats of all modules

pktflow

Shows pktflow stats

rates

Shows rates stats

Command Mode

- /exec

show hardware internal statistics module-all rates

show hardware internal statistics module-all rates

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

statistics

Shows stats Information

module-all

Shows stats of all modules

rates

Shows rates stats

Command Mode

- /exec

show hardware internal statistics module pktflow all

show hardware internal statistics module <module> pktflow all

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

statistics

Shows stats Information

module

Shows stats of a single module

module

Enter module number

pktflow

Shows pktflow stats

all

show packetflow boundary stats from all devices

Command Mode

- /exec

show hardware internal statistics module pktflow rates

show hardware internal statistics module <module> pktflow rates

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

statistics

Shows stats Information

module

Shows stats of a single module

module

Enter module number

pktflow

Shows pktflow stats

rates

Shows rates stats

Command Mode

- /exec

show hardware internal statistics module rates

show hardware internal statistics module <module> rates

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

statistics

Shows stats Information

module

Shows stats of a single module

module

Enter module number

rates

Shows rates stats

Command Mode

- /exec

show hardware internal statistics pktflow all

show hardware internal statistics pktflow all

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

statistics

Shows stats Information

pktflow

Shows pktflow stats

all

show packetflow boundary stats from all devices

Command Mode

- /exec

show hardware internal statistics pktflow rates

show hardware internal statistics pktflow rates

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

statistics

Shows stats Information

pktflow

Shows pktflow stats

rates

Shows rates stats

Command Mode

- /exec

show hardware internal statistics rates

show hardware internal statistics rates [ __readonly__ [ { TABLE_instance <device_name> <inst> [ { TABLE_direction <direction> [ { TABLE_pkts_or_bytes <pkts_or_byts> [ { TABLE_counterinfo <port_num> <port_rate> } { TABLE_suminfo <sum> <sum_rate> } ] } ] } ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

statistics

Show hardware internal statistics information

rates

Show hardware internal statistics rates information

__readonly__

(Optional)

TABLE_instance

(Optional) shows instance and device name

device_name

(Optional) Device name

inst

(Optional) Instance

TABLE_direction

(Optional) shows direction of stats ing/en in/out

direction

(Optional) Direction

TABLE_pkts_or_bytes

(Optional) shows pkt/s or bytes/s

pkts_or_byts

(Optional) pkt/s or bytes/s

TABLE_counterinfo

(Optional) Shows counter information

port_num

(Optional) Display port number

port_rate

(Optional) Rate for the port_num

TABLE_suminfo

(Optional) Shows sum information

sum

(Optional) Display the sum string

sum_rate

(Optional) Total rate for the instance

Command Mode

- /exec

show hardware internal tah interface

show hardware internal tah interface { <if_name> | all }

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

tah

tahoe

interface

interface info

if_name

Physical or Logical interface

all

Display all interfaces

Command Mode

- /exec

show hardware internal tah niv_idx

show hardware internal tah niv_idx <niv_idx>

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

tah

tahoe

niv_idx

interface niv_idx

niv_idx

Enter niv_idx

Command Mode

- /exec

show hardware internal tah sdk logs all

show hardware internal tah sdk logs all

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

tah

Tahoe

sdk

Software Development Kit

logs

Dump internal tahoe logs

all

Dump all available logs

Command Mode

- /exec

show hardware internal version

show hardware internal version [ __readonly__ <devname> <instance> <version> <bios_ver> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

internal

Show hardware internal information

version

Show device versions

__readonly__

(Optional)

devname

(Optional) Device name

instance

(Optional) Device Instance

version

(Optional) Device version

bios_ver

(Optional) BIOS version

Command Mode

- /exec

show hardware ip verify

show hardware [ forwarding ] ip verify [ module <module> ] [ __readonly__ <info_str> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

forwarding

(Optional) Show hardware information for forwarding path

ip

IP

verify

Show IP packet verification checks enabled in hardware

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

info_str

(Optional) IDS Check Stats

Command Mode

- /exec

show hardware profile status

show hardware profile status [ module <module> ] [ detail ] [ __readonly__ { <total_lpm> <total_host> <reserved_lpm> <max_host4_limit> <max_host6_limit> <max_mcast_limit> <max_mcast6_limit> <used_lpm_total> <used_v4_lpm> <used_v6_lpm> <used_v6_lpm_128> <used_host_lpm_total> <used_host_v4_lpm> <used_host_v6_lpm> <used_mcast> <used_mcast6> <used_mcast_oifl> <used_host_in_host_total> <used_host4_in_host> <used_host6_in_host> <mfib_fd_status> <mfib_fd_maxroute> <mfib_fd_count> <max_v6_lpm_65_to_127_limit> <max_v6_lpm_limit> <max_ecmp_table_limit> <used_ecmp_table> <lpm_to_host_migrate_table> <host_to_lpm_migrate_table> <max_mcast_transit_route_limit> <used_mcast_transit_routes> <max_ecmp_nh_table_limit> <used_ecmp_nh_table> } ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware usage settings

profile

Show current table usage

status

Show status of dynamic resource allocation

module

(Optional) Slot/module

module

(Optional) Slot/module number

detail

(Optional) Show detailed information

__readonly__

(Optional) Read only

total_lpm

(Optional) Total LPM Entries

total_host

(Optional) Total Host Entries

reserved_lpm

(Optional) Reserved LPM Entries

max_host4_limit

(Optional) Max Host4 Limit Entries

max_host6_limit

(Optional) Max Host6 Limit Entries

max_mcast_limit

(Optional) Max Mcast Limit Entries

max_mcast6_limit

(Optional) Max IPv6 Mcast Limit Entries

used_lpm_total

(Optional) Used LPM Entries (Total)

used_v4_lpm

(Optional) Used IPv4 LPM Entries

used_v6_lpm

(Optional) Used IPv6 LPM Entries

used_v6_lpm_128

(Optional) Used IPv6 LPM_128 Entries

used_host_lpm_total

(Optional) Used Host Entries in LPM (Total)

used_host_v4_lpm

(Optional) Used Host4 Entries in LPM

used_host_v6_lpm

(Optional) Used Host6 Entries in LPM

used_mcast

(Optional) Used Mcast Entries

used_mcast6

(Optional) Used IPv6 Mcast Entries

used_mcast_oifl

(Optional) Used Mcast OIFL Entries

used_host_in_host_total

(Optional) Used Host Entries in Host (Total)

used_host4_in_host

(Optional) Used Host4 Entries in Host

used_host6_in_host

(Optional) Used Host6 Entries in Host

mfib_fd_status

(Optional) MFIB fd status

mfib_fd_maxroute

(Optional) MFIB fd maxroute

mfib_fd_count

(Optional) MFIB fd count

max_v6_lpm_65_to_127_limit

(Optional) Max Ucast IPv6 LPM_65_to_127 Limit Entries

max_v6_lpm_limit

(Optional) Max Ucast IPv6 LPM Limit Entries

max_ecmp_table_limit

(Optional) Max ECMP table Limit Entries

used_ecmp_table

(Optional) Used ECMP Table Entries

lpm_to_host_migrate_table

(Optional) Times Route Migrated from LPM to Host Table

host_to_lpm_migrate_table

(Optional) Times Route Migrated from Host to LPM Table

max_mcast_transit_route_limit

(Optional) Max Mcast Transit Route Limit Entries

used_mcast_transit_routes

(Optional) Used Mcast Transit Routes

max_ecmp_nh_table_limit

(Optional) Max ECMP NH table Limit Entries

used_ecmp_nh_table

(Optional) Used ECMP NH Table Entries

Command Mode

- /exec

show hardware profile tcam region

show hardware profile tcam region [ __readonly__ { TCAM_Region [ { TABLE_Sizes <tcam_compat_type> <tcam_compat_size> <tcam_compat_width> } ] } ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

profile

profile

tcam

Show tcam parameters

region

Show tcam region sizes

__readonly__

(Optional)

TCAM_Region

(Optional)

TABLE_Sizes

(Optional)

tcam_compat_type

(Optional)

tcam_compat_size

(Optional)

tcam_compat_width

(Optional)

Command Mode

- /exec

show hardware qos afd profile

show hardware qos afd profile [ module <module> ] [ __readonly__ TABLE_qos_afd_profile <module> <prof-desc> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show qos related information

afd

Show Approximate Fair Dropping config

profile

Show AFD profile config

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_qos_afd_profile

(Optional) the xml qos_afd_profile configuration

prof-desc

(Optional) profile description

Command Mode

- /exec

show hardware qos burst-detect max-records

show hardware qos burst-detect max-records [ __readonly__ TABLE_qos_burstdetect_maxrecords ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show qos related information

burst-detect

Show oobst burst-detect info

max-records

Show oobst burst-detect max-records

__readonly__

(Optional)

TABLE_qos_burstdetect_maxrecords

(Optional) the xml qos_burst-detect max-records configuration

Command Mode

- /exec

show hardware qos eoq stats-class

show hardware qos eoq stats-class [ module <module> ] [ __readonly__ TABLE_qos_eoq_stats_class <module> <eoq-stats-class-desc> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show QoS related information

eoq

Show Extended Output Queue(EOQ) related information

stats-class

Show EOQ Statistics class selection config

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_qos_eoq_stats_class

(Optional) the xml qos_eoq_stats_class configuration

eoq-stats-class-desc

(Optional) selected class description

Command Mode

- /exec

show hardware qos include ipg

show hardware qos include ipg [ module <module> ] [ __readonly__ TABLE_qos_include_ipg <module> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show qos related information

include

Show inlcude config

ipg

Show whether to include IPG in Shaping/Policing config

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_qos_include_ipg

(Optional) the xml qos_include_ipg configuration

Command Mode

- /exec

show hardware qos ing-pg-hdrm-reserve

show hardware qos ing-pg-hdrm-reserve [ module <module> ] [ __readonly__ TABLE_qos_ing_pg_hdrm_reserve <module> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show qos related information

ing-pg-hdrm-reserve

Show ing-pg-hdrm-reserve config

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_qos_ing_pg_hdrm_reserve

(Optional) the xml qos_ing_pg_hdrm_reserve configuration

Command Mode

- /exec

show hardware qos ing-pg-no-min

show hardware qos ing-pg-no-min [ module <module> ] [ __readonly__ TABLE_qos_ing_pg_no_min <module> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show qos related information

ing-pg-no-min

Show ing-pg-no-min config

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_qos_ing_pg_no_min

(Optional) the xml qos_ing_pg_no_min configuration

Command Mode

- /exec

show hardware qos ing-pg-share

show hardware qos ing-pg-share [ module <module> ] [ __readonly__ TABLE_qos_ing_pg_share <module> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show qos related information

ing-pg-share

Show ing-pg-share config

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_qos_ing_pg_share

(Optional) the xml qos_ing_pg_share configuration

Command Mode

- /exec

show hardware qos min-buffer

show hardware qos min-buffer [ module <module> ] [ __readonly__ TABLE_qos_min_buffer_profile <module> <buff-prof-desc> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show qos related information

min-buffer

Show min-buffer config

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_qos_min_buffer_profile

(Optional) the xml qos_min_buffer_profile configuration

buff-prof-desc

(Optional) buffer profile description

Command Mode

- /exec

show hardware qos ns-buffer-profile

show hardware qos ns-buffer-profile [ module <module> ] [ __readonly__ TABLE_qos_ns_buffer_profile <module> <buff-prof-desc> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show qos related information

ns-buffer-profile

Show ns-buffer-profile config

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_qos_ns_buffer_profile

(Optional) the xml qos_ns_buffer_profile configuration

buff-prof-desc

(Optional) buffer profile description

Command Mode

- /exec

show hardware qos ns-mcq3-alias

show hardware qos ns-mcq3-alias [ module <module> ] [ __readonly__ TABLE_qos_ns_mcq3_alias <module> <ns-mcq3-alias-desc> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

qos

Show QoS related information

ns-mcq3-alias

Show NS mc-queue-3 alias class selection config

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_qos_ns_mcq3_alias

(Optional) the xml qos_ns_mcq3_alias configuration

ns-mcq3-alias-desc

(Optional) selected class description

Command Mode

- /exec

show hardware rate-limiter

show hardware rate-limiter [ module <module> ] [ layer-3 { <l3-opts> | multicast <mcast-opts> } | layer-2 <l2-opts> | <opts> | f1 <f1-opts> | span-egress ] [ __readonly__ TABLE_hardware_rate_limiter <rate-limit-class> <class-descr> <module> <rate-limit-configured> <rate-limit-allowed> <rate-limit-dropped> <rate-limit-total> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

rate-limiter

Show Rate-Limiter configs and statistics

layer-3

(Optional) Layer-3 control and Routed packets

l3-opts

(Optional)

multicast

(Optional) Multicast data packets

mcast-opts

(Optional)

layer-2

(Optional) Layer-2 control and Bridged packets

l2-opts

(Optional)

opts

(Optional)

f1

(Optional) Control packets from F1 modules to supervisor

f1-opts

(Optional)

span-egress

(Optional) SPAN/ERSPAN egress packets

module

(Optional) Specify a module number

module

(Optional) Specify a module number

__readonly__

(Optional)

TABLE_hardware_rate_limiter

(Optional) the xml Rate-Limiter configuration and statistics

rate-limit-class

(Optional) the xml rate limiter class

class-descr

(Optional) class description

module

(Optional) the xml module number

rate-limit-configured

(Optional) the xml rate-limit-configured

rate-limit-allowed

(Optional) the xml rate-limit-allowed

rate-limit-dropped

(Optional) the xml rate-limit-dropped

rate-limit-total

(Optional) the xml rate-limit-total

Command Mode

- /exec

show hardware rate-limiter span-egress

show hardware rate-limiter span-egress

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

rate-limiter

Show Rate-Limiter configs and statistics

span-egress

SPAN/ERSPAN egress packets

Command Mode

- /exec

show hardware rl snmp class-id

show hardware rl snmp class-id <class-id> [ __readonly__ TABLE-classRateLimiterTable <class-id-out> <class-descr> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

rl

Show Rate-Limiter configs and statistics

snmp

Show Rate-Limiter snmp information

class-id

rate-limiter class-id

class-id

rate-limiter class

__readonly__

(Optional)

TABLE-classRateLimiterTable

(Optional) Class Rate Limiter Table

class-id-out

(Optional) class if out

class-descr

(Optional) class description

Command Mode

- /exec

show hardware rl snmp global class-id

show hardware rl snmp global class-id <class-id> [ __readonly__ TABLE-globalRateLimiterTable <class-id-out> <rate-limit-configured> <rate-limit-allowed> <rate-limit-dropped> <rate-limit-total> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

rl

Show Rate-Limiter configs and statistics

snmp

Show Rate-Limiter snmp information

global

Show Global information

class-id

rate-limiter class-id

class-id

rate-limiter class

__readonly__

(Optional)

TABLE-globalRateLimiterTable

(Optional) Global Rate Limiter Table

class-id-out

(Optional) class if out

rate-limit-configured

(Optional) rate-limit-configured

rate-limit-allowed

(Optional) rate-limit-allowed

rate-limit-dropped

(Optional) rate-limit-dropped

rate-limit-total

(Optional) rate-limit-total

Command Mode

- /exec

show hardware rl snmp local snmp-index class-id

show hardware rl snmp local snmp-index <snmp-index> class-id <class-id> [ __readonly__ TABLE-localRateLimiterTable <snmp-index-out> <class-id-out> <rate-limit-configured> <rate-limit-configured-source> <rate-limit-allowed> <rate-limit-dropped> <rate-limit-total> ]

Syntax Description

Syntax Description

show

Show running system information

hardware

Show hardware information

rl

Show Rate-Limiter configs and statistics

snmp

Show Rate-Limiter snmp information

local

Show Local information

snmp-index

snmp physical index

snmp-index

physical index

class-id

rate-limiter class-id

class-id

rate-limiter class

__readonly__

(Optional)

TABLE-localRateLimiterTable

(Optional) Local Rate Limiter Table

snmp-index-out

(Optional) snmp index out

class-id-out

(Optional) class if out

rate-limit-configured

(Optional) rate-limit-configured

rate-limit-configured-source

(Optional) rate-limit-configured-source

rate-limit-allowed

(Optional) rate-limit-allowed

rate-limit-dropped

(Optional) rate-limit-dropped

rate-limit-total

(Optional) rate-limit-total

Command Mode

- /exec

show hostname

show { hostname | switchname } [ __readonly__ { <hostname> } ]

Syntax Description

Syntax Description

show

Show running system information

hostname

show the system's hostname

switchname

show the system's hostname

__readonly__

(Optional) Read Only

hostname

(Optional)

Command Mode

- /exec

show hosts

show hosts [ __readonly__ [ <dnslookup> ] [ <dnsnameservice> ] [ { TABLE_vrf <vrfname> [ <defaultdomains> ] [ <additionaldomainserver> ] [ <domainservers> ] [ <nameservice> ] [ <dhcpdomains> ] [ <dhcpdomainservers> ] } ] [ { TABLE_dnsconfigvrf <dnsvrfname> [ <usevrf> ] [ <token> ] [ { TABLE_dnsconfigvrfconfig <config> } ] } ] [ { TABLE_hosts <host> [ <address> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

hosts

Show information about DNS

__readonly__

(Optional)

dnslookup

(Optional) dns lookup enable status

dnsnameservice

(Optional) name service

TABLE_vrf

(Optional) vrf domain servers

vrfname

(Optional) vrf name

defaultdomains

(Optional) default domain

additionaldomainserver

(Optional) additionaldomain

domainservers

(Optional) domain server

nameservice

(Optional) name service

dhcpdomains

(Optional) dhcp domains

dhcpdomainservers

(Optional) dhcpservers

TABLE_dnsconfigvrf

(Optional) dns config vrf

dnsvrfname

(Optional) vrfname

usevrf

(Optional) usevrf

token

(Optional) token

TABLE_dnsconfigvrfconfig

(Optional) dns config vrf config

config

(Optional) token

TABLE_hosts

(Optional) all configured dns hosts

host

(Optional) xml host information

address

(Optional) xml address information

Command Mode

- /exec

show hsrp

show hsrp [ interface <interface-id> ] [ group <group-number> ] [ active | init | learn | listen | speak | standby ] + [ all ] [ brief [ all ] | detail ] [ ipv4 | ipv6 ] [ __readonly__ <show_hsrp_start> { TABLE_grp_detail <sh_if_index> <sh_group_num> <sh_group_type> <sh_group_version> <sh_group_state> <sh_state_reason> <sh_prio> <sh_cfg_prio> <sh_fwd_lower_threshold> <sh_fwd_upper_threshold> <sh_can_forward> <sh_preempt> <sh_preempt_min_delay> <sh_preempt_min_delay_active> <sh_preempt_reload_delay> <sh_preempt_reload_delay_active> <sh_preempt_sync_delay> <sh_preempt_sync_delay_active> <sh_cur_hello> <sh_cur_hello_attr> <sh_cfg_hello> <sh_cfg_hello_attr> <sh_active_hello> <sh_cur_hold> <sh_cur_hold_attr> <sh_cfg_hold> <sh_cfg_hold_attr> <sh_vip> <sh_vip_v6> <sh_vip_attr> <sh_num_vip_sec> { TABLE_grp_vip_sec <sh_vip_sec> <sh_vip_sec_v6> } <sh_active_router_addr> <sh_active_router_addr_v6> <sh_active_router_prio> <sh_active_router_timer> <sh_standby_router_addr> <sh_standby_router_addr_v6> <sh_standby_router_prio> <sh_authentication_type> <sh_authentication_data> <sh_keystring_attr> <sh_keystring_timeout> <sh_keystring_cur_valid> <sh_vmac> <sh_vmac_attr> <sh_num_of_state_changes> <sh_last_state_change> <sh_num_of_total_state_changes> <sh_last_total_state_change> <sh_num_track_obj> { TABLE_grp_track_obj <sh_track_obj> <sh_track_obj_state> <sh_track_obj_prio> } <sh_ip_redund_name> <sh_ip_redund_name_attr> } <show_hsrp_end> ]

Syntax Description

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

interface

(Optional) Groups on this interface

interface-id

(Optional) Interface

active

(Optional) Groups in active state

init

(Optional) Groups in init state

listen

(Optional) Groups in listen state

standby

(Optional) Groups in standby state

learn

(Optional) Groups in learn state

speak

(Optional) Groups in speak state

group

(Optional) Group number

group-number

(Optional) Group Number

all

(Optional) Include groups in disabled state

brief

(Optional) Brief output

detail

(Optional) Detailed output

ipv4

(Optional) HSRP V4 Groups

ipv6

(Optional) HSRP V6 Groups

all

(Optional) Display all VIPs

__readonly__

(Optional) Read only

show_hsrp_start

(Optional) Show hsrp start

TABLE_grp_detail

(Optional) Group table detail

sh_if_index

(Optional) Interface type and number

sh_group_num

(Optional) Group number

sh_group_state

(Optional) HSRP state

sh_state_reason

(Optional) Reason

sh_group_type

(Optional) Group type

sh_group_version

(Optional) Group version

sh_prio

(Optional) Priority

sh_cfg_prio

(Optional) Configured priority

sh_fwd_lower_threshold

(Optional) Lower threshold value

sh_fwd_upper_threshold

(Optional) Upper threhsold value

sh_can_forward

(Optional) Current forwarding status

sh_preempt

(Optional) Preemption enabled/not

sh_preempt_min_delay

(Optional) Preemption min delay

sh_preempt_min_delay_active

(Optional) Active preemption min delay

sh_preempt_reload_delay

(Optional) Preemption reload delay

sh_preempt_reload_delay_active

(Optional) Active preemption reload delay

sh_preempt_sync_delay

(Optional) Preemption sync delay

sh_preempt_sync_delay_active

(Optional) Active preemption sync delay

sh_cur_hello

(Optional) Current hello time

sh_cur_hello_attr

(Optional) Hello time in ms/not

sh_cfg_hello

(Optional) Configured hello time

sh_cfg_hello_attr

(Optional) Hello time in ms/not

sh_active_hello

(Optional) Active hello time

sh_cur_hold

(Optional) Current hold time

sh_cur_hold_attr

(Optional) Hello time in ms/not

sh_cfg_hold

(Optional) Configured hold time

sh_cfg_hold_attr

(Optional) Hello time in ms/not

sh_vip

(Optional) Virtual IP address

sh_vip_attr

(Optional) Virtual IP address attribute

sh_num_vip_sec

(Optional) Number of Secondary virtual IP address

TABLE_grp_vip_sec

(Optional) Group secondary ip address

sh_vip_sec

(Optional) Secondary virtual IP address

sh_active_router_addr

(Optional) Active router address

sh_active_router_prio

(Optional) Active router priority

sh_active_router_timer

(Optional) Active router expiry timer

sh_standby_router_addr

(Optional) Standby router address

sh_standby_router_prio

(Optional) Standby router priority

sh_authentication_type

(Optional) Authentication type

sh_authentication_data

(Optional) Authentication data

sh_keystring_attr

(Optional) Keystring attribute

sh_keystring_timeout

(Optional) Keystring timeout

sh_keystring_cur_valid

(Optional) Keystring current valid time

sh_vmac

(Optional) Virtual MAC

sh_vmac_attr

(Optional) Virtual MAC attribute

sh_num_of_state_changes

(Optional) Number of state changes

sh_last_state_change

(Optional) Last state change time

sh_num_of_total_state_changes

(Optional) Number of total state changes

sh_last_total_state_change

(Optional) Last total state change time

sh_num_track_obj

(Optional) Number of tracked objects

TABLE_grp_track_obj

(Optional) Group tracked objects

sh_track_obj

(Optional) Tracked object

sh_track_obj_state

(Optional) State of tracked object

sh_track_obj_prio

(Optional) Tracked object priority decrement

sh_ip_redund_name

(Optional) IP redundancy name

sh_ip_redund_name_attr

(Optional) IP redundancy name attribute

show_hsrp_end

(Optional) End of Group

Command Mode

- /exec

show hsrp anycast

show hsrp anycast [ <id> { ipv4 | ipv6 | both } ] [ brief ]

Syntax Description

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

anycast

Anycast related commands

id

(Optional) Bundle number

ipv4

(Optional) Associate IP Version 4 for the bundle

ipv6

(Optional) Associate IP Version 6 for the bundle

both

(Optional) Associate IP Version 4 and 6 for the bundle

brief

(Optional) Brief output

Command Mode

- /exec

show hsrp anycast interface vlan

show hsrp anycast interface { vlan | bdi } <id>

Syntax Description

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

anycast

Anycast related commands

interface

Bundle on this interface Interface

vlan

VLAN interface

bdi

Bridge-Domain interface

id

VLAN number

Command Mode

- /exec

show hsrp anycast internal info

show hsrp anycast internal info [ <id> { ipv4 | ipv6 | both } ]

Syntax Description

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

anycast

Anycast related commands

internal

HSRP internal information

info

Internal datastructure information display

id

(Optional) Bundle number

ipv4

(Optional) Associate IP Version 4 for the bundle

ipv6

(Optional) Associate IP Version 6 for the bundle

both

(Optional) Associate IP Version 4 and 6 for the bundle

Command Mode

- /exec

show hsrp anycast internal info pss-rec config

show hsrp anycast internal info pss-rec { config | info } [ <id> { ipv4 | ipv6 | both } ]

Syntax Description

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

anycast

Anycast related commands

internal

HSRP internal information

info

Internal datastructure information display

pss-rec

HSRP Anycast PSS record

config

HSRP Anycast configuration records from pss

info

HSRP Anycast Running information records from pss

id

(Optional) Bundle number

ipv4

(Optional) IPv4 version of the bundle

ipv6

(Optional) IPv6 version of the bundle

both

(Optional) IP Version 4 and 6 for the bundle

Command Mode

- /exec

show hsrp anycast remote-db

show hsrp anycast remote-db [ <id> { ipv4 | ipv6 | both } ]

Syntax Description

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

anycast

Anycast related commands

remote-db

Remote data base for the bundle

id

(Optional) Bundle number

ipv4

(Optional) Associate IP Version 4 for the bundle

ipv6

(Optional) Associate IP Version 6 for the bundle

both

(Optional) Associate IP Version 4 and 6 for the bundle

Command Mode

- /exec

show hsrp anycast summary

show hsrp anycast summary

Syntax Description

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

anycast

Anycast related commands

summary

Show HSRP summary

Command Mode

- /exec

show hsrp bfd-sessions

show hsrp bfd-sessions [ interface <interface-id> [ to <ipaddress> ] ] [ __readonly__ TABLE_bfd_sess <interface> <list_size> { <src_addr> | <src_addr_v6> } { <dst_addr> | <dst_addr_v6> } <ref_count> { TABLE_ref_groups <ref_group_id> } { TABLE_hist_groups <hist_group_id> <hist_operation> <hist_rel_time> <hist_abs_time> <hist_ref_count> <hist_group_state> <hist_status> <hist_op_reason> } ]

Syntax Description

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

bfd-sessions

BFD sessions

interface

(Optional) Groups on this interface

interface-id

(Optional) Interface

to

(Optional) To IP address

ipaddress

(Optional) Sessions to IP address

__readonly__

(Optional)

TABLE_bfd_sess

(Optional)

interface

(Optional) Interface

list_size

(Optional) List size

src_addr

(Optional) IPv4 Source address

dst_addr

(Optional) IPv4 Destination address

ref_count

(Optional) Ref count

TABLE_ref_groups

(Optional)

ref_group_id

(Optional) Group id

TABLE_hist_groups

(Optional)

hist_group_id

(Optional) Group id

hist_operation

(Optional) Operation

hist_rel_time

(Optional) Relative time

hist_abs_time

(Optional) Absolute time

hist_ref_count

(Optional) Ref count

hist_group_state

(Optional) Group state

hist_status

(Optional) Status

hist_op_reason

(Optional) Op reason

Command Mode

- /exec

show hsrp bfd-sessions

show hsrp bfd-sessions [ interface <interface-id> [ to <ipaddress> ] ]

Syntax Description

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

bfd-sessions

BFD sessions

interface

(Optional) Groups on this interface

interface-id

(Optional) Interface

to

(Optional) To IP address

ipaddress

(Optional) Sessions to IP address

Command Mode

- /exec

show hsrp delay

show hsrp delay [ interface <interface-id> ] [ __readonly__ TABLE_delay <interface> <min_delay> <reload_delay> ]

Syntax Description

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

delay

Group initialisation delay

interface

(Optional) Groups on this interface

interface-id

(Optional) Interface

__readonly__

(Optional)

TABLE_delay

(Optional)

interface

(Optional) Interface

min_delay

(Optional) Min delay

reload_delay

(Optional) Reload delay

Command Mode

- /exec

show hsrp ext-mib sec-addr

show hsrp ext-mib sec-addr [ <ifindex-in> <group-id-in> <ip1-in> <ip2-in> <ip3-in> <ip4-in> ] [ __readonly__ TABLE_cHsrpExtSecAddrTable <ifindex-out> <group-id-out> <ip1-out> <ip2-out> <ip3-out> <ip4-out> { <cHsrpExtSecAddrTable> <cHsrpExtSecAddrAddress> <cHsrpExtSecAddrRowStatus> } ]

Syntax Description

Syntax Description

__readonly__

(Optional) Read Only

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

ext-mib

Show hsrp extended mib specific configuration

sec-addr

Secondary virtual address

ifindex-in

(Optional) hsrp group ifindex

group-id-in

(Optional) hsrp group id

group-id-out

(Optional) hsrp group num

ifindex-out

(Optional) hsrp group interface index

ip1-in

(Optional) first part of vip

ip2-in

(Optional) second part of vip

ip3-in

(Optional) third part of vip

ip4-in

(Optional) fourth part of vip

ip1-out

(Optional) first part of vip out

ip2-out

(Optional) second part of vip out

ip3-out

(Optional) third part of vip out

ip4-out

(Optional) fourth part of vip out

TABLE_cHsrpExtSecAddrTable

(Optional) Hsrp extended mib secondary address table

cHsrpExtSecAddrTable

(Optional) Hsrp extended mib Secondary address table

cHsrpExtSecAddrAddress

(Optional) Hsrp extended mib Secondary Address

cHsrpExtSecAddrRowStatus

(Optional) Hsrp extended mib secondary address row status

Command Mode

- /exec

show hsrp ext-mib use-bia

show hsrp ext-mib use-bia [ <ifindex-in> ] [ __readonly__ TABLE_cHsrpExtIfEntry <ifindex-out> { <cHsrpExtIfUseBIA> <cHsrpExtIfRowStatus> } ]

Syntax Description

Syntax Description

__readonly__

(Optional) Read Only

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

ext-mib

Show hsrp extended mib specific configuration

use-bia

Use BIA

ifindex-in

(Optional) hsrp group ifindex

ifindex-out

(Optional) hsrp group ifindex

TABLE_cHsrpExtIfEntry

(Optional) Use BIA info table

cHsrpExtIfUseBIA

(Optional) Use BIA enabled

cHsrpExtIfRowStatus

(Optional) Use BIA row status

Command Mode

- /exec

show hsrp internal bulk-db

show hsrp internal bulk-db { [ <val1> [ <val2> ] ] | [ in-use-only ] }

Syntax Description

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

internal

HSRP internal information

bulk-db

Show HSRP bulk-db fields

val1

(Optional) (Start) Index in the db to dump

val2

(Optional) End Index in the db to dump

in-use-only

(Optional) Show only recs in use

Command Mode

- /exec

show hsrp internal counters

show hsrp internal counters [ <value> ]

Syntax Description

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

internal

HSRP internal information

counters

Show HSRP non-zero counters

value

(Optional) Specific counter

Command Mode

- /exec

show hsrp internal counters

show hsrp internal counters [ <value> ]

Syntax Description

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

internal

HSRP internal information

counters

Show HSRP non-zero counters

value

(Optional) Specific counter

Command Mode

- /exec

show hsrp internal debugs

show hsrp internal [ event-history ] debugs

Syntax Description

Syntax Description

show

Show running system information

hsrp

Show information about hsrp

internal

Show internal hsrp information

event-history

(Optional) Show various event logs of hsrp

debugs

Show debug logs of HSRP

Command Mode

- /exec

show hsrp internal errors

show hsrp internal [ event-history ] errors

Syntax Description

Syntax Description

show

Show running system information

hsrp

Show information about hsrp

internal

Show internal hsrp information

event-history

(Optional) Show various event logs of hsrp

errors

Show error logs of HSRP

Command Mode

- /exec

show hsrp internal info

show hsrp internal info [ { [ global ] | [ interface <interface-id> ] [ group <group-number> ] [ active | init | learn | listen | speak | standby ] + } ]

Syntax Description

Syntax Description

show

Show running system information

hsrp

HSRP information

internal

Commands for internal use

info

Data structure display

global

(Optional) Global Data structure display only

interface

(Optional) Groups on this interface

interface-id

(Optional) Interface

active

(Optional) Groups in active state

init

(Optional) Groups in init state

listen

(Optional) Groups in listen state

standby

(Optional) Groups in standby state

learn

(Optional) Groups in learn state

speak

(Optional) Groups in speak state

group

(Optional) Group number

group-number

(Optional) Group Number

Command Mode

- /exec

show hsrp internal info fsrv

show hsrp internal info fsrv

Syntax Description

Syntax Description

show

Show running system information

hsrp

Show information about hsrp

internal

Show internal hsrp information

info

Data structure display

fsrv

Show HSRP global information(FSRV)

Command Mode

- /exec

show hsrp internal info pss-rec config

show hsrp internal info pss-rec { config | info } [ { interface <interface-id> group <group-number> { ipv4 | ipv6 } } ]

Syntax Description

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

internal

HSRP internal information

info

Internal datastructure information display

pss-rec

HSRP PSS record

config

HSRP configuration records from pss

info

HSRP Running information records from pss

interface

(Optional) Groups on this interface

interface-id

(Optional) Interface

group

(Optional) Group number

group-number

(Optional) Group Number

ipv4

(Optional) Configure IP Version 4 group

ipv6

(Optional) Configure IP Version 6 group

Command Mode

- /exec

show hsrp internal mem-stats

show hsrp internal mem-stats [ uuid <i0> ] [ hsrp-only ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

hsrp

Show information about hsrp

internal

Show internal hsrp information

mem-stats

Show memory allocation statistics of HSRP

uuid

(Optional) Show stats only for this uuid

i0

(Optional) Enter uuid

hsrp-only

(Optional) Show stats of only HSRP Engine

detail

(Optional) Show detail memstats for hsrp

Command Mode

- /exec

show hsrp internal msgs

show hsrp internal [ event-history ] msgs

Syntax Description

Syntax Description

show

Show running system information

hsrp

Show information about hsrp

internal

Show internal hsrp information

event-history

(Optional) Show various event logs of hsrp

msgs

Show various message logs of HSRP

Command Mode

- /exec

show hsrp mgo

show hsrp mgo [ name <name> | brief ]

Syntax Description

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

mgo

Show HSRP mgo details

name

(Optional) Redundancy name string

name

(Optional) name string

brief

(Optional) show HSPR mgo brief

Command Mode

- /exec

show hsrp summary

show hsrp summary [ __readonly__ <switchover_notify_rxed> <bfd_enabled> <num_of_groups> <num_of_v4_v1_groups> <num_of_v4_v2_groups> <num_of_v6_v2_groups> <num_of_active_groups> <num_of_standby_groups> <num_of_listen_groups> <num_of_v6_active_groups> <num_of_v6_standby_groups> <num_of_v6_listen_groups> <num_of_hsrp_enabled_ifs> <counter_pkts_tx> <counter_pkts_tx_failure> <counter_pkts_in> <counter_pkts_bad_vr> <counter_mts_rx> ]

Syntax Description

Syntax Description

show

Show running system information

hsrp

Hot Standby Router Protocol (HSRP) information

summary

Show HSRP summary

__readonly__

(Optional)

switchover_notify_rxed

(Optional) Switchover notification received (1 => active)

bfd_enabled

(Optional) BFD status

num_of_groups

(Optional) Total number of groups

num_of_v4_v1_groups

(Optional) Number of IPv4 V1 groups

num_of_v4_v2_groups

(Optional) Number of IPv4 V2 groups

num_of_v6_v2_groups

(Optional) Number of IPv6 V2 groups

num_of_active_groups

(Optional) Number of active groups

num_of_standby_groups

(Optional) Number of standby groups

num_of_listen_groups

(Optional) Number of listen groups

num_of_v6_active_groups

(Optional) Number of IPv6 active groups

num_of_v6_standby_groups

(Optional) Number of IPv6 standby groups

num_of_v6_listen_groups

(Optional) Number of IPv6 listen groups

num_of_hsrp_enabled_ifs

(Optional) Number of HSRP enabled interfaces

counter_pkts_tx

(Optional) Number of packet transmission successes

counter_pkts_tx_failure

(Optional) Number of packet transmission failure

counter_pkts_in

(Optional) Number of packets received successfully

counter_pkts_bad_vr

(Optional) Number of packets for unknown groups

counter_mts_rx

(Optional) Number of MTS messages received

Command Mode

- /exec

Chapter 10. I Show Commands

- show icam resource module inst

- show ieth-header-decode

- show imp client

- show imp client sa

- show imp internal event-history acfg

- show imp internal event-history errors

- show imp internal event-history events

- show imp internal event-history ha

- show imp internal event-history log

- show imp internal event-history msgs

- show imp internal event-history mts

- show imp internal event-history pss

- show imp internal event-history trace

- show imp internal info

- show imp internal mem-stats

- show incompatibility-all system

- show incompatibility system

- show install

- show install all failed-standby

- show install all failure-reason

- show install all impact

- show install all impact epld

- show install all status

- show install epld status

- show install impact

- show install impact

- show install impact detail

- show install log

- show install packages

- show install patches

- show interface

- show interface

- show interface

- show interface

- show interface

- show interface

- show interface

- show interface

- show interface brief

- show interface brief

- show interface brief

- show interface brief

- show interface brief

- show interface brief

- show interface brief

- show interface brief

- show interface cable-diagnostics-tdr

- show interface capabilities

- show interface capabilities

- show interface counters

- show interface counters

- show interface counters

- show interface counters

- show interface counters

- show interface counters

- show interface counters brief

- show interface counters brief

- show interface counters detailed

- show interface counters detailed

- show interface counters detailed

- show interface counters detailed

- show interface counters detailed all

- show interface counters detailed all

- show interface counters detailed all

- show interface counters detailed all

- show interface counters detailed all

- show interface counters detailed cached

- show interface counters errors

- show interface counters errors

- show interface counters errors

- show interface counters snmp

- show interface counters storm-control

- show interface counters storm-control

- show interface counters table

- show interface counters trunk

- show interface debounce

- show interface debounce

- show interface description

- show interface description

- show interface description

- show interface description

- show interface description

- show interface description

- show interface description

- show interface fcoe

- show interface flowcontrol

- show interface flowcontrol

- show interface hardware-mappings

- show interface mac-address

- show interface mac-address

- show interface priority-flow-control

- show interface private-vlan mapping

- show interface snmp-ifindex

- show interface status

- show interface status

- show interface status

- show interface status

- show interface status

- show interface status

- show interface status

- show interface status err-disabled

- show interface status err-disabled

- show interface status err-vlans

- show interface status err-vlans

- show interface switchport

- show interface switchport

- show interface transceiver

- show interface transceiver

- show interface transceiver fex-fabric

- show interface transceiver fex-fabric

- show interface trunk

- show interface trunk

- show interface untagged-cos

- show inventory

- show ip adjacency

- show ip amt internal pim-cache

- show ip amt relay

- show ip amt route

- show ip amt tunnel

- show ip arp

- show ip arp anycast topo-info

- show ip arp cache

- show ip arp client

- show ip arp controller-statistics

- show ip arp esi

- show ip arp inspection

- show ip arp inspection interfaces

- show ip arp inspection log

- show ip arp inspection statistics

- show ip arp inspection vlan

- show ip arp internal buffers

- show ip arp internal event-history

- show ip arp internal event-history buffer-size

- show ip arp internal hmm statistics

- show ip arp internal info

- show ip arp internal library

- show ip arp internal mem

- show ip arp multihoming-statistics

- show ip arp off-list

- show ip arp open-flow error-statistics

- show ip arp snmp pttree

- show ip arp statistics

- show ip arp suppression-cache

- show ip arp suppression topo-info

- show ip arp tunnel-statistics

- show ip arp vaddr

- show ip arp vpc-statistics

- show ip as-path-access-list

- show ip (m)bgp

- show ip cache

- show ip client

- show ip community-list

- show ip debug

- show ip dhcp global statistics

- show ip dhcp relay

- show ip dhcp relay address

- show ip dhcp relay information trusted-sources

- show ip dhcp relay statistics

- show ip dhcp snooping

- show ip dhcp snooping binding

- show ip dhcp snooping statistics

- show ip dhcp status

- show ip dns source-interface

- show ip dns source-interface vrf all

- show ip eigrp

- show ip eigrp

- show ip eigrp accounting

- show ip eigrp event-history

- show ip eigrp event-history bfd

- show ip eigrp event

- show ip eigrp interfaces

- show ip eigrp internal

- show ip eigrp internal library-info

- show ip eigrp internal mem-stats

- show ip eigrp internal syslog rate-limit

- show ip eigrp metric

- show ip eigrp route-map statistics

- show ip eigrp sia-event

- show ip eigrp sia-statistics

- show ip eigrp timers

- show ip eigrp traffic

- show ip extcommunity-list

- show ip fib adjacency

- show ip fib interfaces

- show ip fib internal error counts

- show ip fib mroute

- show ip fib mroute

- show ip fib mroute txlist

- show ip fib route

- show ip fib route

- show ip fib route recovered

- show ip ftm statistics

- show ip ftp source-interface

- show ip ftp source-interface vrf all

- show ip http source-interface

- show ip http source-interface vrf all

- show ip igmp event-history

- show ip igmp groups

- show ip igmp interface show ip igmp interface

- show ip igmp internal

- show ip igmp internal

- show ip igmp internal library-info

- show ip igmp internal mem-stats

- show ip igmp internal mrib-cache

- show ip igmp internal mrib

- show ip igmp internal pim-cache

- show ip igmp internal vpc

- show ip igmp local-groups

- show ip igmp policy statistics reports

- show ip igmp snooping

- show ip igmp snooping event-history

- show ip igmp snooping explicit-tracking

- show ip igmp snooping groups

- show ip igmp snooping internal

- show ip igmp snooping internal proxy-querier

- show ip igmp snooping lookup-mode

- show ip igmp snooping mac-oif

- show ip igmp snooping mrouter

- show ip igmp snooping otv vlan brief

- show ip igmp snooping pw vlan brief

- show ip igmp snooping querier

- show ip igmp snooping report statistics

- show ip igmp snooping snmp mib adminMode

- show ip igmp snooping snmp mib aliasingMode

- show ip igmp snooping snmp mib cisV3ProcessEnableOperStatus

- show ip igmp snooping snmp mib explicitTrackingTable

- show ip igmp snooping snmp mib fallBackTime

- show ip igmp snooping snmp mib fastBlockEnabled

- show ip igmp snooping snmp mib fastleaveenabled

- show ip igmp snooping snmp mib filterStatsTable

- show ip igmp snooping snmp mib ifAccessGroupTable

- show ip igmp snooping snmp mib ifConfigTable

- show ip igmp snooping snmp mib ifLimitTable

- show ip igmp snooping snmp mib ifLimitTotalTable

- show ip igmp snooping snmp mib igmpsnoopingenabled

- show ip igmp snooping snmp mib iterfaceStatsTable

- show ip igmp snooping snmp mib lastMemeberQueryCount

- show ip igmp snooping snmp mib lastMemeberQueryInterval

- show ip igmp snooping snmp mib leaveQueryType

- show ip igmp snooping snmp mib mcastGroupTable

- show ip igmp snooping snmp mib mcastRouterCfgTable

- show ip igmp snooping snmp mib mcastRouterConfigTable

- show ip igmp snooping snmp mib multicastGroupConfigTable

- show ip igmp snooping snmp mib multicastGroupPortListTable

- show ip igmp snooping snmp mib multicastGroupTable

- show ip igmp snooping snmp mib operMode

- show ip igmp snooping snmp mib querierTable

- show ip igmp snooping snmp mib reportsuppressionenabled

- show ip igmp snooping snmp mib robustnessVariable

- show ip igmp snooping snmp mib routerAlertCheckEnabled

- show ip igmp snooping snmp mib sourceOnlyEntryAgingTime

- show ip igmp snooping snmp mib sourceOnlyLearningEnabled

- show ip igmp snooping snmp mib tcnFloodQueryCount

- show ip igmp snooping snmp mib timeToLiveCheckEnabled

- show ip igmp snooping snmp mib topoChanageQuerySolicitEnabled

- show ip igmp snooping snmp mib v3ProcessEnabledAdminStatus

- show ip igmp snooping snmp mib v3SnoopingSupport

- show ip igmp snooping snmp mib vlanFilterConfigTable

- show ip igmp snooping snmp mib vlanconfigtable

- show ip igmp snooping statistics

- show ip igmp vrf all

- show ip interface

- show ip internal

- show ip internal bfd data

- show ip internal context array

- show ip internal event-history

- show ip internal event-history bfd

- show ip internal event-history buffer-size

- show ip internal hmm

- show ip internal igmp-snoop-stats

- show ip internal info

- show ip internal info interface

- show ip internal mem

- show ip lisp

- show ip lisp data-cache

- show ip lisp locator-hash

- show ip lisp map-cache

- show ip lisp statistics

- show ip lisp translate-cache

- show ip lisp version-hash

- show ip load-sharing

- show ip local-pt

- show ip local policy

- show ip logging

- show ip mbgp

- show ip mbgp

- show ip mbgp community

- show ip mbgp dampening

- show ip mbgp extcommunity

- show ip mbgp flap-statistics

- show ip mbgp neighbors

- show ip mbgp nexthop-database

- show ip mbgp nexthop

- show ip mbgp prefix-list

- show ip mbgp received-paths

- show ip msdp count

- show ip msdp event-history

- show ip msdp internal

- show ip msdp internal errors

- show ip msdp internal library-info

- show ip msdp internal mem-stats

- show ip msdp internal mrib

- show ip msdp internal pim-cache

- show ip msdp mesh-group

- show ip msdp peer

- show ip msdp policy statistics sa-policy in

- show ip msdp rpf

- show ip msdp sa

- show ip msdp sources

- show ip msdp statistics

- show ip msdp summary

- show ip nat max

- show ip nat statistics

- show ip nat timeout

- show ip nat translations

- show ip ospf

- show ip ospf border-routers

- show ip ospf database

- show ip ospf database database-summary

- show ip ospf database detail

- show ip ospf event-history

- show ip ospf event-history detail

- show ip ospf ha

- show ip ospf interface

- show ip ospf interface brief

- show ip ospf internal

- show ip ospf internal ha

- show ip ospf internal library-info

- show ip ospf internal mem-stats

- show ip ospf internal missed-traps-statistics

- show ip ospf lsa-content-changed-list

- show ip ospf memory

- show ip ospf mpls ldp interface

- show ip ospf neighbors

- show ip ospf neighbors detail

- show ip ospf neighbors summary

- show ip ospf policy statistics

- show ip ospf request-list

- show ip ospf retransmission-list

- show ip ospf route

- show ip ospf route summary

- show ip ospf sham-links

- show ip ospf statistics

- show ip ospf summary-address

- show ip ospf traffic

- show ip ospf traps-queue

- show ip ospf virtual-links

- show ip ospf virtual-links brief

- show ip overlay-traffic

- show ip pim bitfield

- show ip pim config-sanity

- show ip pim df

- show ip pim event-history

- show ip pim fabric info

- show ip pim fabric legacy-vlans

- show ip pim group-range

- show ip pim interface show ip pim interface

- show ip pim internal

- show ip pim internal errors

- show ip pim internal interface-txlist vrf

- show ip pim internal library

- show ip pim internal mem-stats

- show ip pim internal pss-dump

- show ip pim internal vpc

- show ip pim lisp encap

- show ip pim mdt

- show ip pim mdt bgp

- show ip pim mdt history interval

- show ip pim mdt receive

- show ip pim mdt send

- show ip pim neighbor

- show ip pim oif-list

- show ip pim policy statistics

- show ip pim policy statistics jp

- show ip pim route

- show ip pim route internal

- show ip pim rp-hash

- show ip pim rp

- show ip pim statistics

- show ip pim vrf

- show ip ping source-interface

- show ip ping source-interface vrf all

- show ip policy

- show ip prefix-list

- show ip process

- show ip rip

- show ip rip interface

- show ip rip internal event-history

- show ip rip internal library-info

- show ip rip internal mem-stats

- show ip rip memory

- show ip rip neighbor

- show ip rip policy statistics redistribute

- show ip rip route

- show ip rip statistics

- show ip router-id

- show ip rsvp

- show ip rsvp authentication

- show ip rsvp counters

- show ip rsvp fast-reroute

- show ip rsvp hello client lsp

- show ip rsvp hello client neighbor

- show ip rsvp hello graceful-restart

- show ip rsvp hello instance

- show ip rsvp interface

- show ip rsvp internal counters

- show ip rsvp internal database

- show ip rsvp internal event-history authentication

- show ip rsvp internal event-history bundle-message

- show ip rsvp internal event-history cli

- show ip rsvp internal event-history database

- show ip rsvp internal event-history dump-messages

- show ip rsvp internal event-history error

- show ip rsvp internal event-history event

- show ip rsvp internal event-history fast-reroute

- show ip rsvp internal event-history hello

- show ip rsvp internal event-history high-availability

- show ip rsvp internal event-history interface

- show ip rsvp internal event-history neighbor

- show ip rsvp internal event-history packet

- show ip rsvp internal event-history path

- show ip rsvp internal event-history policy

- show ip rsvp internal event-history process

- show ip rsvp internal event-history proxy

- show ip rsvp internal event-history refresh

- show ip rsvp internal event-history reliable

- show ip rsvp internal event-history resv

- show ip rsvp internal event-history route

- show ip rsvp internal event-history server

- show ip rsvp internal event-history session

- show ip rsvp internal event-history signalling

- show ip rsvp internal event-history size

- show ip rsvp internal event-history tc

- show ip rsvp internal mem-stats

- show ip rsvp internal message-id database

- show ip rsvp internal performance

- show ip rsvp internal pss bundle

- show ip rsvp internal pss client-batch

- show ip rsvp internal pss config

- show ip rsvp internal pss globals

- show ip rsvp internal pss hello client neighbor

- show ip rsvp internal pss hello instance

- show ip rsvp internal pss isb

- show ip rsvp internal pss lxsb

- show ip rsvp internal pss neighbor

- show ip rsvp internal pss pfc

- show ip rsvp internal pss psb

- show ip rsvp internal pss reg-clients

- show ip rsvp internal pss request

- show ip rsvp internal pss rsb

- show ip rsvp internal pss sa

- show ip rsvp internal refresh reduction

- show ip rsvp neighbor

- show ip rsvp reservation

- show ip rsvp sender

- show ip rsvp session

- show ip rsvp signalling rate-limit

- show ip rsvp signalling refresh interval

- show ip rsvp signalling refresh misses

- show ip rsvp signalling refresh reduction

- show ip sla application

- show ip sla configuration

- show ip sla enhanced-history collection-statistics

- show ip sla enhanced-history distribution-statistics

- show ip sla group schedule

- show ip sla history

- show ip sla reaction-configuration

- show ip sla reaction-trigger

- show ip sla responder

- show ip sla statistics

- show ip ssh source-interface

- show ip ssh source-interface vrf all

- show ip static-route

- show ip stats

- show ip telnet source-interface

- show ip telnet source-interface vrf all

- show ip tftp source-interface

- show ip tftp source-interface vrf all

- show ip traceroute source-interface

- show ip traceroute source-interface vrf all

- show ip traffic

- show ip txlist list

- show ip verify source

- show ipv6 adjacency

- show ipv6 amt tunnel

- show ipv6 bgp

- show ipv6 bgp

- show ipv6 bgp

- show ipv6 bgp community

- show ipv6 bgp dampening

- show ipv6 bgp extcommunity

- show ipv6 bgp flap-statistics

- show ipv6 bgp neighbors

- show ipv6 bgp nexthop-database

- show ipv6 bgp nexthop

- show ipv6 bgp received-paths

- show ipv6 bgp regexp

- show ipv6 bgp summary

- show ipv6 cache

- show ipv6 client

- show ipv6 dhcp relay

- show ipv6 dhcp relay statistics

- show ipv6 eigrp

- show ipv6 eigrp route-map statistics

- show ipv6 fragments

- show ipv6 icmp

- show ipv6 icmp global traffic

- show ipv6 icmp interface

- show ipv6 icmp internal event-history

- show ipv6 icmp internal event-history buffer-size

- show ipv6 icmp internal hmm statistics

- show ipv6 icmp ndp

- show ipv6 icmp off-list

- show ipv6 icmp process sdb

- show ipv6 icmp vaddr

- show ipv6 icmp vpc-statistics

- show ipv6 interface

- show ipv6 interface global

- show ipv6 internal bfd data

- show ipv6 internal context array

- show ipv6 internal event-history

- show ipv6 internal event-history buffer-size

- show ipv6 internal info

- show ipv6 internal mem

- show ipv6 internal netstack m6rib

- show ipv6 internal netstack mroute

- show ipv6 lisp data-cache

- show ipv6 local-pt

- show ipv6 local policy

- show ipv6 mld groups

- show ipv6 mld internal errors

- show ipv6 mld internal m6rib

- show ipv6 mld local-groups

- show ipv6 mld route internal

- show ipv6 mld vrf all

- show ipv6 mtu

- show ipv6 nd ra dns search-list

- show ipv6 nd ra dns server

- show ipv6 nd rt-pref global pt

- show ipv6 ndp

- show ipv6 neighbor static

- show ipv6 pim bitfield

- show ipv6 pim df

- show ipv6 pim embed-rp

- show ipv6 pim event-history

- show ipv6 pim fabric info

- show ipv6 pim fabric legacy-vlans

- show ipv6 pim group-range

- show ipv6 pim interface show ipv6 pim interface

- show ipv6 pim internal

- show ipv6 pim internal buffers

- show ipv6 pim internal errors

- show ipv6 pim internal library-info

- show ipv6 pim internal mem-stats

- show ipv6 pim internal pss-dump df-states

- show ipv6 pim neighbor

- show ipv6 pim oif-list

- show ipv6 pim policy statistics jp

- show ipv6 pim route

- show ipv6 pim route internal

- show ipv6 pim rp-hash

- show ipv6 pim rp

- show ipv6 pim statistics

- show ipv6 pim vrf

- show ipv6 policy

- show ipv6 prefix-list

- show ipv6 process

- show ipv6 process sdb

- show ipv6 raguard statistics

- show ipv6 rip policy statistics redistribute

- show ipv6 routers

- show ipv6 static-route

- show ipv6 statistics

- show ipv6 traffic

- show isis

- show isis adjacency

- show isis csnp

- show isis database

- show isis event-history

- show isis hostname

- show isis interface

- show isis internal dpi

- show isis internal library-info

- show isis internal mem-stats

- show isis internal mtr

- show isis internal packet queue counters

- show isis internal pss

- show isis ipv6 redistribute route

- show isis ipv6 route-map statistics

- show isis ipv6 route

- show isis lsp free-list

- show isis mesh-group

- show isis non tlv overflow-list

- show isis redistribute route

- show isis route-map statistics

- show isis route

- show isis route is

- show isis rrm

- show isis spf-adjacency

- show isis spf-log

- show isis srm

- show isis ssn

- show isis statistics

- show isis summary-address show isis ipv6 summary-address

- show isis topology

- show isis traffic

- show itd

- show itd

- show itd

- show itd

- show itd session device-group

- show itd statistics

- show itd statistics

- show itd vrf

- show itd vrf

show icam resource module inst

show icam { resource | entries } module <module> inst <inst> [ sort { top <top_x> | sort-order <s_o> | filter <f_f> | top <top_x> sort-order <s_o> | top <top_x> filter <f_f> | top <top_x> sort-order <s_o> filter <f_f> | top <top_x> filter <f_f> sort-order <s_o> | sort-order <s_o> top <top_x> | sort-order <s_o> filter <f_f> | sort-order <s_o> filter <f_f> top <top_x> | sort-order <s_o> top <top_x> filter <f_f> | filter <f_f> top <top_x> | filter <f_f> sort-order <s_o> | filter <f_f> top <top_x> sort-order <s_o> | filter <f_f> sort-order <s_o> top <top_x> } ] [ __readonly__ <module> <instance> [ { TABLE_ingress_resource <Feature> <TCAM> <BANK> <Feature_Entries> <Free_Entries> <Percent_Util> } { TABLE_egress_resource <Feature> <TCAM> <BANK> <Feature_Entries> <Free_Entries> <Percent_Util> } { <Mod> <Inst> TABLE_tcam_bank_utilization <Tcam_no> <Bank_no> <Used> <Free> <Percent_util> } { TABLE_global_configs <Atomic_Update> <Bank_Chain_Mode> <Dynamic_Bank_Mapping> <LOU_Threshold_Value> } ] [ { TABLE_TCAM_entries [ <Feature> ] [ <Pkt_Type> ] [ <SourceIP_Mask_DestIP_Mask> ] [ <Action> ] [ <ifindex> ] [ <Stats> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

icam

intelligent CAM

resource

TCAM Resource utilization per feature

entries

TCAM Entries with result and stats

module

Module Number

module

Enter Module Number

inst

ASIC/Forwarding Engine Instance Number

inst

Enter Instance Number

sort

(Optional) Sorted display

top

(Optional) Show top x% entries (Default:1%)

top_x

(Optional) x% of entries to be displayed

sort-order

(Optional) Choose the order of displaying sorted entries (Default:Descending)

s_o

(Optional) Enter 1 for Ascending OR 2 for Descending order of displaying sorted entries

filter

(Optional) Feature to be filtered (Default:All)

f_f

(Optional) Enter feature to be filtered

__readonly__

(Optional) Read Only

module

(Optional) module number

instance

(Optional) instance number

TABLE_ingress_resource

(Optional) Table for ingress resources

Feature

(Optional) Feature name

TCAM

(Optional) TCAM entry

BANK

(Optional) BANK entry

Feature_Entries

(Optional) Feature_Entries

Free_Entries

(Optional) Free_Entries

Percent_Util

(Optional) Percent_Util

TABLE_egress_resource

(Optional) Table for egress resources

Feature

(Optional) Feature name

TCAM

(Optional) TCAM entry

BANK

(Optional) BANK entry

Feature_Entries

(Optional) Feature_Entries

Free_Entries

(Optional) Free_Entries

Percent_Util

(Optional) Percent_Util

Mod

(Optional) Module

Inst

(Optional) Instance number

TABLE_tcam_bank_utilization

(Optional) TABLE_tcam_bank_utilization

Tcam_no

(Optional) Tcam number

Bank_no

(Optional) Bank number

Used

(Optional) used

Free

(Optional) Free

Percent_util

(Optional) Percent of utilization

TABLE_global_configs

(Optional) TABLE_global_configs

Atomic_Update

(Optional) Atomic_Update

Bank_Chain_Mode

(Optional) Bank_Chain_Mode

Dynamic_Bank_Mapping

(Optional) Dynamic_Bank_Mapping

LOU_Threshold_Value

(Optional) LOU_Threshold_Value

TABLE_TCAM_entries

(Optional) Table for TCAM entries

Feature

(Optional) Feature name

Pkt_Type

(Optional) Packet type

SourceIP_Mask_DestIP_Mask

(Optional) IP addresses

Action

(Optional) Action

ifindex

(Optional) Interface index

Stats

(Optional) Stats

Command Mode

- /exec

show ieth-header-decode

show ieth-header-decode <ieth>

Syntax Description

Syntax Description

show

Show running system information

ieth-header-decode

Show decode of ieth header

ieth

ieth header in hex (0xFF...) or string (FF..) form

Command Mode

- /exec

show imp client

show imp client

Syntax Description

Syntax Description

show

Show running system information

imp

ipsec management process

client

Show ipsec clients name

Command Mode

- /exec

show imp client sa

show imp client sa

Syntax Description

Syntax Description

show

Show running system information

imp

IPSec management process

client

IMP clinet

sa

Display all SAs

Command Mode

- /exec

show imp internal event-history acfg

show imp internal event-history acfg

Syntax Description

Syntax Description

show

Show running system information

imp

Display IMP information

internal

IMP Internal State

event-history

Show various event logs of IMP

acfg

ACFG debugs

Command Mode

- /exec

show imp internal event-history errors

show imp internal event-history errors

Syntax Description

Syntax Description

show

Show running system information

imp

Display IMP information

internal

IMP Internal State

event-history

Show various event logs of IMP

errors

Error messages

Command Mode

- /exec

show imp internal event-history events

show imp internal event-history events

Syntax Description

Syntax Description

show

Show running system information

imp

Display IMP information

internal

IMP Internal State

event-history

Show various event logs of IMP

events

Event messages

Command Mode

- /exec

show imp internal event-history ha

show imp internal event-history ha

Syntax Description

Syntax Description

show

Show running system information

imp

Display IMP information

internal

IMP Internal State

event-history

Show various event logs of IMP

ha

HA messages

Command Mode

- /exec

show imp internal event-history log

show imp internal event-history log

Syntax Description

Syntax Description

show

Show running system information

imp

Display IMP information

internal

IMP Internal State

event-history

Show various event logs of IMP

log

MTS debugs

Command Mode

- /exec

show imp internal event-history msgs

show imp internal event-history msgs

Syntax Description

Syntax Description

show

Show running system information

imp

Display IMP information

internal

IMP Internal State

event-history

Show various event logs of IMP

msgs

Show various message logs of IMP

Command Mode

- /exec

show imp internal event-history mts

show imp internal event-history mts

Syntax Description

Syntax Description

show

Show running system information

imp

Display IMP information

internal

IMP Internal State

event-history

Show various event logs of IMP

mts

MTS debugs

Command Mode

- /exec

show imp internal event-history pss

show imp internal event-history pss

Syntax Description

Syntax Description

show

Show running system information

imp

Display IMP information

internal

IMP Internal State

event-history

Show various event logs of IMP

pss

PSS debugging

Command Mode

- /exec

show imp internal event-history trace

show imp internal event-history trace

Syntax Description

Syntax Description

show

Show running system information

imp

Display IMP information

internal

IMP Internal State

event-history

Show various event logs of IMP

trace

Trace debugging

Command Mode

- /exec

show imp internal info

show imp internal info [ { global | vsan <i0> } ]

Syntax Description

Syntax Description

show

Show running system information

imp

Show information about IPsec Management Process

internal

Show internal imp information

info

Show internal data structure information

global

(Optional) Display imp global info

vsan

(Optional) Enter the vsan id

i0

(Optional)

Command Mode

- /exec

show imp internal mem-stats

show imp internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

imp

Show information about IPsec Management Process

internal

Show internal imp information

mem-stats

Show memory allocation statistics of IMP

detail

(Optional) Show detail memstats for F_Port Server

Command Mode

- /exec

show incompatibility-all system

show incompatibility-all { system <uri0> | nxos <uri1> } [ __readonly__ { [ TABLE_incompat_all <Str1> [ <Serv> ] [ <Cap> ] [ <Desc> ] [ <Req> ] [ <Enable> ] ] [ <Dynamic> ] } ]

Syntax Description

Syntax Description

show

Show running system information

incompatibility-all

Show incompatible configurations for the entire system

system

show incompatibilities with an image

uri0

Enter image uri

nxos

show incompatibilities with an image

uri1

Enter image uri

__readonly__

(Optional)

TABLE_incompat_all

(Optional) Show incompatibility system table

Str1

(Optional)

Serv

(Optional)

Cap

(Optional)

Desc

(Optional)

Req

(Optional)

Enable

(Optional)

Dynamic

(Optional)

Command Mode

- /exec

show incompatibility system

show incompatibility { system <uri0> | nxos <uri1> } [ __readonly__ { [ TABLE_incompat <Str1> [ <Serv> ] [ <Cap> ] [ <Desc> ] [ <Req> ] [ <Enable> ] ] [ <Dynamic> ] } ]

Syntax Description

Syntax Description

show

Show running system information

incompatibility

Show incompatible configurations

system

show incompatibilities with an image

uri0

Enter image uri

nxos

show incompatibilities with an image

uri1

Enter image uri

__readonly__

(Optional)

TABLE_incompat

(Optional) Show incompatibility system table

Str1

(Optional)

Serv

(Optional)

Cap

(Optional)

Desc

(Optional)

Req

(Optional)

Enable

(Optional)

Dynamic

(Optional)

Command Mode

- /exec

show install

show install { inactive | active [ brief ] | committed } [ __readonly__ { <curr_nxos_image> [ TABLE_smu_list <install_smu_id> + ] [ TABLE_package_list <package_id> ] } ]

Syntax Description

Syntax Description

show

Show running system information

install

Install related show commands

inactive

Inactive packages

active

Active packages

brief

(Optional) Brief

committed

Committed packages

__readonly__

(Optional)

curr_nxos_image

(Optional) NXOS image

TABLE_smu_list

(Optional)

install_smu_id

(Optional) install operation smu identifier

TABLE_package_list

(Optional)

package_id

(Optional) Package name

Command Mode

- /exec

show install all failed-standby

show install all failed-standby [ __readonly__ { [ TABLE_installFailStandby <Str1> ] } ]

Syntax Description

Syntax Description

show

Show running system information

install

Show the software install impact between two images

all

Show install all information

failed-standby

show log from failed standby

__readonly__

(Optional)

TABLE_installFailStandby

(Optional) Install failed-standby table

Str1

(Optional)

Command Mode

- /exec

show install all failure-reason

show install all failure-reason [ __readonly__ { [ TABLE_installFailReason <installFailReasonStr> ] } ]

Syntax Description

Syntax Description

show

Show running system information

install

Show the software install impact between two images

all

show install all information

failure-reason

Show failure reason for the last install all

__readonly__

(Optional)

TABLE_installFailReason

(Optional) Install failure-reason table

installFailReasonStr

(Optional)

Command Mode

- /exec

show install all impact

show install all impact [ nxos <uri> ] + [ non-disruptive ]

Syntax Description

Syntax Description

show

Show running system information

install

Show the software install impact between two images

all

show install all information

impact

show impact of the install all command

nxos

(Optional) boot-variable name

uri

(Optional) Enter image uri

non-disruptive

(Optional) non-disruptive show install

Command Mode

- /exec

show install all impact epld

show install all impact epld <uri1>

Syntax Description

Syntax Description

show

Show running system information

install

Show the software install status

all

show install all information

impact

show impact of the install all epld command

epld

Show EPLD install information

uri1

Local URI containing EPLD Image

Command Mode

- /exec

show install all status

show install all status

Syntax Description

Syntax Description

show

Show running system information

install

Show the software install impact between two images

all

show install all information

status

show status of the current or last install all

Command Mode

- /exec

show install epld status

show install epld status

Syntax Description

Syntax Description

show

Show running system information

install

Show the software install status

epld

Show EPLD install information

status

Show status of previous EPLD upgrades

Command Mode

- /exec

show install impact

show install impact <uri0>

Syntax Description

Syntax Description

show

Show running system information

install

Show the software install impact between two images

impact

impact system_uri {active_system_uri/active_kickstart_uri}

uri0

Enter system URI

Command Mode

- /exec

show install impact

show install impact <uri0> <uri1>

Syntax Description

Syntax Description

show

Show running system information

install

Show the software install impact between two images

impact

impact system_uri {active_system_uri/active_kickstart_uri}

uri0

Enter system URI

uri1

Enter active URI

Command Mode

- /exec

show install impact detail

show install impact <uri0> detail

Syntax Description

Syntax Description

show

Show running system information

install

Show the software install impact between two images

impact

impact system_uri {active_system_uri/active_kickstart_uri}

uri0

Enter system URI

detail

Show detailed install impact of given system image

Command Mode

- /exec

show install log

show install log { [ <id> | from <id1> ] [ detail ] [ reverse ] | [ last ] } [ __readonly__ { current_time <curr_time> [ TABLE_show_log_output <install_id> <install_log_entry> + ] } ]

Syntax Description

Syntax Description

show

Show running system information

install

Install related show commands

log

log

id

(Optional) Install Identifies

from

(Optional) Starting at this install identifier

id1

(Optional) Install Identifier

detail

(Optional) Detailed information including impacted processes

reverse

(Optional) Displays the logs in reverse order

last

(Optional) Display the logs for last install operation

__readonly__

(Optional)

current_time

(Optional) current time

curr_time

(Optional) current time

TABLE_show_log_output

(Optional)

install_id

(Optional) install operation id

install_log_entry

(Optional) install log entry

Command Mode

- /exec

show install packages

show install packages [ __readonly__ { <curr_nxos_image> [ TABLE_package_list <package_name> <version> <state> ] } ]

Syntax Description

Syntax Description

show

Show running system information

install

Install related show commands

packages

All packages

__readonly__

(Optional)

curr_nxos_image

(Optional) NXOS image

TABLE_package_list

(Optional)

package_name

(Optional) Package name

version

(Optional) Package version

state

(Optional) package state

Command Mode

- /exec

show install patches

show install patches [ __readonly__ { <curr_nxos_image> [ TABLE_smu_list <install_smu_id> <install_smu_state> [ TABLE_module_list <install_modno> <install_mod_smu_state> ] ] } ]

Syntax Description

Syntax Description

show

Show running system information

install

Install related show commands

patches

All Patches

__readonly__

(Optional)

TABLE_smu_list

(Optional)

curr_nxos_image

(Optional) NXOS image

install_smu_id

(Optional) install operation smu identifier

install_smu_state

(Optional) install operation smu state

TABLE_module_list

(Optional)

install_modno

(Optional) install operation module number

install_mod_smu_state

(Optional) install operation module state

Command Mode

- /exec

show interface

show interface <ifid> [ brief | quick ] [ __readonly__ TABLE_interface <interface> [ <desc> ] [ <svi_if_index> ] [ <svi_admin_state> ] [ <svi_rsn_desc> ] [ <svi_line_proto> ] [ <svi_hw> ] [ <svi_mac> ] [ <svi_desc> ] [ <svi_ip_addr> ] [ <svi_ip_mask> ] [ <svi_mtu> ] [ <svi_bw> ] [ <svi_delay> ] [ <svi_tx_load> ] [ <svi_rx_load> ] [ <svi_carrier_delay_sec> ] [ <svi_carrier_delay_msec> ] [ <svi_arp_type> ] [ <svi_arp_timeout> ] [ <svi_time_last_cleared> ] { [ TABLE_sec_vlan ] [ <sec_vlan> ] [ <sec_vlan_type> ] } [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_load_interval2> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_load_interval3> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_l3avg2_inbytes> ] [ <eth_l3avg2_inpkts> ] [ <eth_l3avg2_outbytes> ] [ <eth_l3avg2_outpkts> ] [ <eth_l3avg3_inbytes> ] [ <eth_l3avg3_inpkts> ] [ <eth_l3avg3_outbytes> ] [ <eth_l3avg3_outpkts> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_nobuf> ] [ <eth_inbcast> ] [ <eth_inmcast> ] [ <eth_inucast> ] [ <eth_ingiants> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_runts> ] [ <eth_storm_supp> ] [ <eth_throtles> ] [ <eth_inerr> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_outbcast> ] [ <eth_outmcast> ] [ <eth_outucast> ] [ <eth_outgiants> ] [ <eth_inpause> ] [ <eth_dribble> ] [ <eth_in_ifdown_drops> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_underrun> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_resets> ] [ <eth_babbles> ] [ <eth_latecoll> ] [ <eth_deferred> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_outpause> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_sqetest> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <eth_eee_atx_lpi_msec> ] [ <eth_eee_arcv_lpi_msec> ] [ <eth_eee_atx_lpi_transitions> ] [ <eth_eee_arcv_lpi_transitions> ] [ <eth_phy_ber_count> ] [ <eth_phy_errblks_count> ] [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] [ <svi_reliability> ] <switchport> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid

Enter interface type and number in module/slot format

brief

(Optional) Show brief info of interface

quick

(Optional) Show info of interface skipping stats

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

desc

(Optional) Interface description

switchport

(Optional) Switchport enabled

svi_if_index

(Optional) Interface

svi_admin_state

(Optional)

svi_rsn_desc

(Optional) Interface state reason detailed

svi_line_proto

(Optional)

svi_hw

(Optional) Hardware

svi_mac

(Optional) Address

svi_desc

(Optional) Interface Description

svi_ip_addr

(Optional) IP Address

svi_ip_mask

(Optional) IP address mask

svi_mtu

(Optional) MTU size in bytes

svi_bw

(Optional) Bandwidth in kilobits

svi_delay

(Optional) Throughput delay (tens of microseconds)

svi_tx_load

(Optional) Tx Load

svi_rx_load

(Optional) Rx Load

svi_carrier_delay_sec

(Optional) carrier delay value in seconds

svi_carrier_delay_msec

(Optional) carrier delay value in milli-seconds

svi_arp_type

(Optional) ARP type

svi_arp_timeout

(Optional) ARP timeout value

svi_time_last_cleared

(Optional) Time last cleared

TABLE_sec_vlan

(Optional) secondary vlans

sec_vlan

(Optional) vlan id

sec_vlan_type

(Optional) secondary vlan type

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_load_interval2

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_load_interval3

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_l2_ucastpkts

(Optional) L2 switched ucast pkts

eth_l2_ucastbytes

(Optional) L2 switched ucast bytes

eth_l2_mcastpkts

(Optional) L2 switched mcast pkts

eth_l2_mcastbytes

(Optional) L2 switched mcast bytes

eth_l2_bcastpkts

(Optional) L2 switched bcast pkts

eth_l2_bcastbytes

(Optional) L2 switched bcast bytes

eth_l3in_ucastpkts

(Optional) IPv4 L3 in switched ucast pkts

eth_l3in_ucastbytes

(Optional) IPv4 L3 in switched ucast bytes

eth_l3in_mcastpkts

(Optional) IPv4 L3 in switched mcast pkts

eth_l3in_mcastbytes

(Optional) IPv4 L3 in switched mcast bytes

eth_l3in_bcastpkts

(Optional) L3 in switched bcast pkts

eth_l3in_bcastbytes

(Optional) L3 in switched bcast bytes

eth_l3out_ucastpkts

(Optional) IPv4 L3 out switched ucast pkts

eth_l3out_ucastbytes

(Optional) IPv4 L3 out switched ucast bytes

eth_l3out_mcastpkts

(Optional) IPv4 L3 out switched mcast pkts

eth_l3out_mcastbytes

(Optional) IPv4 L3 out switched mcast bytes

eth_l3out_bcastpkts

(Optional) L3 out switched bcast pkts

eth_l3out_bcastbytes

(Optional) L3 out switched bcast bytes

eth_l3in_routed_pkts

(Optional) L3 in routed pkts

eth_l3in_routed_bytes

(Optional) L3 in routed bytes

eth_l3out_routed_pkts

(Optional) L3 out routed pkts

eth_l3out_routed_bytes

(Optional) L3 out routed bytes

eth_l3avg1_inbytes

(Optional) Load interval 1 L3 average in switched bytes

eth_l3avg1_inpkts

(Optional) Load interval 1 L3 average in switched pkts

eth_l3avg1_outbytes

(Optional) Load interval 1 L3 average out switched bytes

eth_l3avg1_outpkts

(Optional) Load interval 1 L3 average out switched pkts

eth_l3avg2_inbytes

(Optional) Load interval 2 L3 average in switched bytes

eth_l3avg2_inpkts

(Optional) Load interval 2 L3 average in switched pkts

eth_l3avg2_outbytes

(Optional) Load interval 2 L3 average out switched bytes

eth_l3avg2_outpkts

(Optional) Load interval 2 L3 average out switched pkts

eth_l3avg3_inbytes

(Optional) Load interval 3 L3 average in switched bytes

eth_l3avg3_inpkts

(Optional) Load interval 3 L3 average in switched pkts

eth_l3avg3_outbytes

(Optional) Load interval 3 L3 average out switched bytes

eth_l3avg3_outpkts

(Optional) Load interval 3 L3 average out switched pkts

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_nobuf

(Optional) No buffer received

eth_inbcast

(Optional) Broadcasts

eth_inmcast

(Optional) Multicasts

eth_inucast

(Optional) Unicasts

eth_ingiants

(Optional) giants

eth_ipmcast

(Optional) IP multicast

eth_inhw_switched

(Optional) Input H/W Switched

eth_insw_switched

(Optional) Input S/W Switched

eth_runts

(Optional) runts

eth_storm_supp

(Optional) storm suppression

eth_throtles

(Optional) throttles

eth_inerr

(Optional) input errors

eth_crc

(Optional) CRC

eth_ecc

(Optional) ECC

eth_frame

(Optional) frame

eth_overrun

(Optional) overrun

eth_ignored

(Optional) ignored

eth_watchdog

(Optional) watchdog

eth_outbcast

(Optional) Broadcasts

eth_outmcast

(Optional) Multicasts

eth_outucast

(Optional) Unicasts

eth_outgiants

(Optional) giants

eth_inpause

(Optional) pause input

eth_dribble

(Optional) input packets with dribble condition

eth_in_ifdown_drops

(Optional) Input if-down drops

eth_bad_eth

(Optional) bad ether type drop

eth_bad_proto

(Optional) bad protocol drops

eth_outpkts

(Optional) packets output

eth_outbytes

(Optional) bytes output

eth_underrun

(Optional) underruns

eth_outhw_switched

(Optional) Out H/W Switched

eth_outsw_switched

(Optional) Out S/W Switched

eth_outerr

(Optional) output errors

eth_coll

(Optional) collisions

eth_resets

(Optional) interface resets

eth_babbles

(Optional) babbles

eth_latecoll

(Optional) late collision

eth_deferred

(Optional) deferred

eth_lostcarrier

(Optional) lost carrier

eth_nocarrier

(Optional) no carrier

eth_outpause

(Optional) PAUSE output

eth_buffail

(Optional) output buffer failures

eth_bufswapped

(Optional) output buffers swapped out

eth_arpdrops

(Optional) arp drops

eth_out_ifdown_drops

(Optional) Output if-down drops

eth_single_coll

(Optional) single collisions

eth_multi_coll

(Optional) multi collisions

eth_excess_coll

(Optional) excessive collisions

eth_jabbers

(Optional) jabbers

eth_shortframe

(Optional) short frames

eth_indiscard

(Optional) discards

eth_bad_encap

(Optional) bad encapsulation

eth_outcrc

(Optional) Output CRC

eth_symbol

(Optional) symbol errors

eth_out_drops

(Optional) output drops

eth_sqetest

(Optional) SQE test

eth_inb64

(Optional) input pkts between 0 and 64 bytes

eth_inb65_127

(Optional) input pkts between 65 and 127 bytes

eth_inb128_255

(Optional) input pkts between 128 and 255 bytes

eth_inb256_511

(Optional) input pkts between 256 and 511 bytes

eth_inb512_1023

(Optional) input pkts between 512 and 1023 bytes

eth_inb1024_1518

(Optional) input pkts between 1024 and 1518 bytes

eth_inb1519_1548

(Optional) input pkts between 1519 and 1548 bytes

eth_intrunk

(Optional) input trunk pkts

eth_outb64

(Optional) output pkts between 0 and 64 bytes

eth_outb65_127

(Optional) output pkts between 65 and 127 bytes

eth_outb128_255

(Optional) output pkts between 128 and 255 bytes

eth_outb256_511

(Optional) output pkts between 256 and 511 bytes

eth_outb512_1023

(Optional) output pkts between 512 and 1023 bytes

eth_outb1024_1518

(Optional) output pkts between 1024 and 1518 bytes

eth_outb1519_1548

(Optional) output pkts between 1519 and 1548 bytes

eth_outtrunk

(Optional) output trunk pkts

eth_bpdu_outlost

(Optional) BPDU output lost

eth_cos0_outlost

(Optional) output pkts

eth_cos1_outlost

(Optional) output pkts

eth_cos2_outlost

(Optional) output pkts

eth_cos3_outlost

(Optional) output pkts

eth_cos4_outlost

(Optional) output pkts

eth_cos5_outlost

(Optional) output pkts

eth_cos6_outlost

(Optional) output pkts

eth_cos7_outlost

(Optional) output pkts

eth_fcoe_in_pkts

(Optional) fcoe in pkts

eth_fcoe_in_octets

(Optional) fcoe in octets

eth_fcoe_out_pkts

(Optional) fcoe out pkts

eth_fcoe_out_octets

(Optional) fcoe out octets

eth_nfcoe_in_pkts

(Optional) nfcoe in pkts

eth_nfcoe_in_octets

(Optional) nfcoe in octets

eth_nfcoe_out_pkts

(Optional) nfcoe out pkts

eth_nfcoe_out_octets

(Optional) nfcoe out octets

eth_eee_atx_lpi_msec

(Optional) Tx Lpi usec

eth_eee_arcv_lpi_msec

(Optional) Rx Lpi usec

eth_eee_atx_lpi_transitions

(Optional) Tx Lpi requests

eth_eee_arcv_lpi_transitions

(Optional) Rx Lpi indications

eth_phy_ber_count

(Optional) Bit error rate counter

eth_phy_errblks_count

(Optional) Errored blocks counter

svi_reliability

(Optional) Reliability

Command Mode

- /exec

show interface

show interface <ifmgmt> [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <state_rsn> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <share_state> ] [ <eth_bundle> ] [ <eth_dce_mode> ] [ <vpc_status> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_encap_vlan> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_loopback> ] [ <eth_keepalive> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_mode> ] [ <eth_ratemode> ] [ <eth_autoneg> ] [ <eth_beacon> ] [ <eth_media> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_members> ] [ <eth_clk_mode> ] [ <eth_arp_type> ] [ <eth_arp_timeout> ] [ <eth_last_in> ] [ <eth_last_out> ] [ <eth_out_hang> ] [ <eth_clear_counters> ] [ <eth_link_flapped> ] [ <eth_inq_size> ] [ <eth_inq_max> ] [ <eth_inq_drops> ] [ <eth_inq_flush> ] [ <eth_out_drop> ] [ <eth_q_strategy> ] [ <eth_outq_size> ] [ <eth_outq_max> ] [ <eth_reset_cntr> ] [ <mgmt_hw_desc> ] [ <mgmt_hw_addr> ] [ <mgmt_ip_addr> ] [ <mgmt_ip_mask> ] [ <mgmt_mtu> ] [ <mgmt_speed> ] [ <mgmt_duplex> ] [ <vdc_lvl_in_avg_bits> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_out_avg_bits> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifmgmt

Enter interface type and number in module/slot format

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

state_rsn

(Optional) Interface state reason

eth_rsn_fac

(Optional) State reason facility

eth_rsn_code

(Optional) State reason code

share_state

(Optional) Interface ownership

eth_bundle

(Optional) Belongs to bundle

eth_dce_mode

(Optional) DCE mode description

vpc_status

(Optional) VPC status

eth_hw_desc

(Optional) HW description

eth_hw_addr

(Optional) HW address

eth_bia_addr

(Optional) bia address

desc

(Optional) Interface description

eth_ip_addr

(Optional) IP Address

eth_ip_mask

(Optional) IP address mask

eth_ip_prefix

(Optional) IP address prefix

eth_mtu

(Optional) MTU

eth_bw

(Optional) Bandwidth

eth_encap_vlan

(Optional) Encapsulation Vlan

eth_dly

(Optional) Delay

eth_reliability

(Optional) Reliability

eth_txload

(Optional) Tx load

eth_rxload

(Optional) Rx load

eth_loopback

(Optional) Loopback

eth_keepalive

(Optional) Keepalive

eth_duplex

(Optional) Duplex

eth_speed

(Optional) Speed

eth_mode

(Optional) Port mode

eth_ratemode

(Optional) Rate mode

eth_autoneg

(Optional) Autonegotiation

eth_beacon

(Optional) Beacon

eth_media

(Optional) Media type

eth_in_flowctrl

(Optional) Input flowcontrol

eth_out_flowctrl

(Optional) Output flowcontrol

eth_mdix

(Optional) Mdix

eth_swt_monitor

(Optional) Switchport Monitor

eth_ethertype

(Optional) EtherType

eth_members

(Optional) Members in this channel

eth_clk_mode

(Optional) Clock mode

eth_arp_type

(Optional) ARP type

eth_arp_timeout

(Optional) ARP timeout

eth_last_in

(Optional) Last input

eth_last_out

(Optional) Last output

eth_out_hang

(Optional) Last output hang

eth_clear_counters

(Optional) Last clearing of show interface counters

eth_link_flapped

(Optional) Last link flapped

eth_inq_size

(Optional) Input queue size

eth_inq_max

(Optional) Input queue max

eth_inq_drops

(Optional) Input queue drops

eth_inq_flush

(Optional) Input queue flushes

eth_out_drop

(Optional) Output drops

eth_q_strategy

(Optional) Queueing strategy

eth_outq_size

(Optional) Output queue size

eth_outq_max

(Optional) Output queue max

eth_reset_cntr

(Optional) Interface resets

mgmt_hw_desc

(Optional) HW description

mgmt_hw_addr

(Optional) HW address

mgmt_ip_addr

(Optional) IP address

mgmt_ip_mask

(Optional) IP address mask

mgmt_mtu

(Optional) MTU

mgmt_speed

(Optional) Speed

mgmt_duplex

(Optional) Duplex

vdc_lvl_in_avg_bits

(Optional) VDC level average input bits

vdc_lvl_in_avg_pkts

(Optional) VDC level average input packets

vdc_lvl_out_avg_bits

(Optional) VDC level average output bits

vdc_lvl_out_avg_pkts

(Optional) VDC level average output packets

vdc_lvl_in_pkts

(Optional) VDC level input packets

vdc_lvl_in_ucast

(Optional) VDC level input unicast packets

vdc_lvl_in_mcast

(Optional) VDC level input multicast packets

vdc_lvl_in_bcast

(Optional) VDC level input broadcast packets

vdc_lvl_in_bytes

(Optional) VDC level input bytes

vdc_lvl_in_bps

(Optional) VDC level input bytes per second

vdc_lvl_in_pps

(Optional) VDC level input packets per second

vdc_lvl_out_pkts

(Optional) VDC level output packets

vdc_lvl_out_ucast

(Optional) VDC level output unicast packets

vdc_lvl_out_mcast

(Optional) VDC level output multicast packets

vdc_lvl_out_bcast

(Optional) VDC level output broadcast packets

vdc_lvl_out_bytes

(Optional) VDC level output bytes

vdc_lvl_out_bps

(Optional) VDC level output bytes per second

vdc_lvl_out_pps

(Optional) VDC level output packets per second

Command Mode

- /exec

show interface

show interface [ controller | quick ] [ __readonly__ TABLE_interface <interface> [ <state> ] [ <state_rsn_desc> ] [ <state_rsn> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <admin_state> ] [ <share_state> ] [ <parent_interface> ] [ <vpc_status> ] [ <eth_bundle> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_encap_vlan> ] [ <medium> ] [ <eth_mode> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_media> ] [ <eth_beacon> ] [ <eth_autoneg> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_ratemode> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_eee_state> ] [ <eth_members> ] [ <eth_link_flapped> ] [ <eth_clear_counters> ] [ <eth_reset_cntr> ] [ <eth_load_interval1> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_load_interval2> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_load_interval3> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_jumbo_inpkts> ] [ <eth_storm_supp> ] [ <eth_runts> ] [ <eth_giants> ] [ <eth_crc> ] [ <eth_nobuf> ] [ <eth_inerr> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_dribble> ] [ <eth_indiscard> ] [ <eth_inpause> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_jumbo_outpkts> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_deferred> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_outdiscard> ] [ <eth_outpause> ] [ <mgmt_hw_desc> ] [ <mgmt_hw_addr> ] [ <mgmt_ip_addr> ] [ <mgmt_ip_mask> ] [ <mgmt_mtu> ] [ <mgmt_speed> ] [ <mgmt_duplex> ] [ <vdc_lvl_in_avg_bits> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_out_avg_bits> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] [ <mgmt_in_pkts> ] [ <mgmt_in_bytes> ] [ <mgmt_in_mcast> ] [ <mgmt_in_compressed> ] [ <mgmt_in_errors> ] [ <mgmt_in_frame> ] [ <mgmt_in_overrun> ] [ <mgmt_in_fifo> ] [ <mgmt_out_pkts> ] [ <mgmt_out_bytes> ] [ <mgmt_out_underruns> ] [ <mgmt_out_errors> ] [ <mgmt_out_collisions> ] [ <mgmt_out_fifo> ] [ <mgmt_out_carrier> ] [ <mgmt_align_err> ] [ <mgmt_fcs_err> ] [ <mgmt_xmit_err> ] [ <mgmt_rcv_err> ] [ <mgmt_undersize> ] [ <mgmt_outdisc> ] [ <mgmt_single_col> ] [ <mgmt_multi_col> ] [ <mgmt_late_col> ] [ <mgmt_excess_col> ] [ <mgmt_carri_sen> ] [ <mgmt_runts> ] [ <mgmt_giants> ] [ <mgmt_sqetest_err> ] [ <mgmt_deferred_tx> ] [ <mgmt_inmactx_err> ] [ <mgmt_inmacrx_err> ] [ <mgmt_symbol_err> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] <admin-state> { <tunnel-ipv4> | <tunnel-ipv6> } <mtu> <bandwidth> <encap-type> <keepalive-period> <keepalive-retries> { <src-ipv4> | <src-ipv6> } <src-intf> { <dest-ipv4> | <dest-ipv6> } <dest-hostname> <vrf_name> <wccp_header> <ttl_val> <tunnel_pmtud_age_time> <tunnel_pmtud_min_mtu> <tunnel_pmtud> <tunnel_pgm_mtu> <tunnel_rx_pkt_count> <tunnel_rx_byte_count> <tunnel_rx_rate> <tunnel_tx_pkt_count> <tunnel_tx_byte_count> <tunnel_tx_rate> <tunnel_clear_counter> [ <svi_if_index> ] [ <svi_admin_state> ] [ <svi_rsn_desc> ] [ <svi_line_proto> ] [ <svi_hw> ] [ <svi_mac> ] [ <svi_desc> ] [ <svi_ip_addr> ] [ <svi_ip_mask> ] [ <svi_mtu> ] [ <svi_bw> ] [ <svi_delay> ] [ <svi_tx_load> ] [ <svi_rx_load> ] [ <svi_carrier_delay_sec> ] [ <svi_carrier_delay_msec> ] [ <svi_arp_type> ] [ <svi_arp_timeout> ] [ <svi_time_last_cleared> ] { [ TABLE_sec_vlan ] [ <sec_vlan> ] [ <sec_vlan_type> ] } [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] [ <svi_reliability> ] [ <overlay_addr> ] [ <overlay_addr_mask> ] [ <overlay_mtu> ] [ <overlay_bandwidth> ] [ <overlay_encap_str> ] [ <overlay_vrf> ] [ <overlay_src_addr> ] [ <overlay_dst_addr> ] [ <overlay_last_link_flap> ] [ <overlay_clear_counters> ] [ <overlay_load_interval> ] [ <overlay_rx_ucastpkts> ] [ <overlay_rx_ucastbytes> ] [ <overlay_rx_mcastpkts> ] [ <overlay_rx_mcastbytes> ] [ <overlay_rx_pkts> ] [ <overlay_rx_bytes> ] [ <overlay_rx_bcastpkts> ] [ <overlay_rx_bcastbytes> ] [ <overlay_rx_bitrate> ] [ <overlay_rx_pktrate> ] [ <overlay_tx_ucastpkts> ] [ <overlay_tx_ucastbytes> ] [ <overlay_tx_mcastpkts> ] [ <overlay_tx_mcastbytes> ] [ <overlay_tx_bcastpkts> ] [ <overlay_tx_bcastbytes> ] [ <overlay_tx_pkts> ] [ <overlay_tx_bytes> ] [ <overlay_tx_bitrate> ] [ <overlay_tx_pktrate> ] <switchport> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

controller

(Optional) Show controller configured interfaces

quick

(Optional) Show info of interface skipping stats

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

state_rsn

(Optional) Interface state reason

switchport

(Optional) Switchport enabled

eth_rsn_fac

(Optional) State reason facility

eth_rsn_code

(Optional) State reason code

admin_state

(Optional) admin state

share_state

(Optional) Interface ownership

parent_interface

(Optional) parent interface

vpc_status

(Optional) VPC status

eth_bundle

(Optional) Belongs to bundle

eth_hw_desc

(Optional) HW description

eth_hw_addr

(Optional) HW address

eth_bia_addr

(Optional) bia address

desc

(Optional) Interface description

eth_ip_addr

(Optional) IP Address

eth_ip_mask

(Optional) IP address mask

eth_ip_prefix

(Optional) IP address prefix

eth_mtu

(Optional) MTU

eth_bw

(Optional) Bandwidth

eth_dly

(Optional) Delay

eth_reliability

(Optional) Reliability

eth_txload

(Optional) Tx load

eth_rxload

(Optional) Rx load

eth_encap_vlan

(Optional) Encapsulation Vlan

medium

(Optional) medium type

eth_mode

(Optional) Port mode

eth_duplex

(Optional) Duplex

eth_speed

(Optional) Speed

eth_media

(Optional) Media type

eth_beacon

(Optional) Beacon

eth_autoneg

(Optional) Autonegotiation

eth_in_flowctrl

(Optional) Input flowcontrol

eth_out_flowctrl

(Optional) Output flowcontrol

eth_mdix

(Optional) Mdix

eth_ratemode

(Optional) Rate mode

eth_swt_monitor

(Optional) Switchport Monitor

eth_ethertype

(Optional) EtherType

eth_eee_state

(Optional) EEE state

eth_members

(Optional) Members in this channel

eth_link_flapped

(Optional) Last link flapped

eth_clear_counters

(Optional) Last clearing of show interface counters

eth_reset_cntr

(Optional) Interface resets

eth_load_interval1

(Optional) interval 1 timer value in sec

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_load_interval2

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_load_interval3

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_l2_ucastpkts

(Optional) L2 switched ucast pkts

eth_l2_ucastbytes

(Optional) L2 switched ucast bytes

eth_l2_mcastpkts

(Optional) L2 switched mcast pkts

eth_l2_mcastbytes

(Optional) L2 switched mcast bytes

eth_l2_bcastpkts

(Optional) L2 switched bcast pkts

eth_l2_bcastbytes

(Optional) L2 switched bcast bytes

eth_l3in_ucastpkts

(Optional) L3 in switched ucast pkts

eth_l3in_ucastbytes

(Optional) L3 in switched ucast bytes

eth_l3in_mcastpkts

(Optional) L3 in switched mcast pkts

eth_l3in_mcastbytes

(Optional) L3 in switched mcast bytes

eth_l3in_bcastpkts

(Optional) L3 in switched bcast pkts

eth_l3in_bcastbytes

(Optional) L3 in switched bcast bytes

eth_l3out_ucastpkts

(Optional) L3 out switched ucast pkts

eth_l3out_ucastbytes

(Optional) L3 out switched ucast bytes

eth_l3out_mcastpkts

(Optional) L3 out switched mcast pkts

eth_l3out_mcastbytes

(Optional) L3 out switched mcast bytes

eth_l3out_bcastpkts

(Optional) L3 out switched bcast pkts

eth_l3out_bcastbytes

(Optional) L3 out switched bcast bytes

eth_l3in_routed_pkts

(Optional) L3 in routed pkts

eth_l3in_routed_bytes

(Optional) L3 in routed bytes

eth_l3out_routed_pkts

(Optional) L3 out routed pkts

eth_l3out_routed_bytes

(Optional) L3 out routed bytes

eth_l3avg1_inbytes

(Optional) Load interval 1 L3 average in switched bytes

eth_l3avg1_inpkts

(Optional) Load interval 1 L3 average in switched pkts

eth_l3avg1_outbytes

(Optional) Load interval 1 L3 average out switched bytes

eth_l3avg1_outpkts

(Optional) Load interval 1 L3 average out switched pkts

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_jumbo_inpkts

(Optional) Incoming jumbo pkts

eth_storm_supp

(Optional) storm suppression

eth_runts

(Optional) runts

eth_giants

(Optional) giants

eth_crc

(Optional) CRC

eth_nobuf

(Optional) No buffer received

eth_inerr

(Optional) input errors

eth_frame

(Optional) frame

eth_overrun

(Optional) overrun

eth_underrun

(Optional) underruns

eth_ignored

(Optional) ignored

eth_watchdog

(Optional) watchdog

eth_bad_eth

(Optional) bad ether type drop

eth_bad_proto

(Optional) bad protocol drops

eth_in_ifdown_drops

(Optional) Input if-down drops

eth_dribble

(Optional) input packets with dribble condition

eth_indiscard

(Optional) discards

eth_inpause

(Optional) pause input

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_outpkts

(Optional) packets output

eth_outbytes

(Optional) bytes output

eth_jumbo_outpkts

(Optional) Outgoing jumbo pkts

eth_outerr

(Optional) output errors

eth_coll

(Optional) collisions

eth_deferred

(Optional) deferred

eth_latecoll

(Optional) late collision

eth_lostcarrier

(Optional) lost carrier

eth_nocarrier

(Optional) no carrier

eth_babbles

(Optional) babbles

eth_outdiscard

(Optional) output discard

eth_outpause

(Optional) PAUSE output

mgmt_hw_desc

(Optional) HW description

mgmt_hw_addr

(Optional) HW address

mgmt_ip_addr

(Optional) IP address

mgmt_ip_mask

(Optional) IP address mask

mgmt_mtu

(Optional) MTU

mgmt_speed

(Optional) Speed

mgmt_duplex

(Optional) Duplex

vdc_lvl_in_avg_bits

(Optional) VDC level average input bits

vdc_lvl_in_avg_pkts

(Optional) VDC level average input packets

vdc_lvl_out_avg_bits

(Optional) VDC level average output bits

vdc_lvl_out_avg_pkts

(Optional) VDC level average output packets

vdc_lvl_in_pkts

(Optional) VDC level input packets

vdc_lvl_in_ucast

(Optional) VDC level input unicast packets

vdc_lvl_in_mcast

(Optional) VDC level input multicast packets

vdc_lvl_in_bcast

(Optional) VDC level input broadcast packets

vdc_lvl_in_bytes

(Optional) VDC level input bytes

vdc_lvl_in_bps

(Optional) VDC level input bytes per second

vdc_lvl_in_pps

(Optional) VDC level input packets per second

vdc_lvl_out_pkts

(Optional) VDC level output packets

vdc_lvl_out_ucast

(Optional) VDC level output unicast packets

vdc_lvl_out_mcast

(Optional) VDC level output multicast packets

vdc_lvl_out_bcast

(Optional) VDC level output broadcast packets

vdc_lvl_out_bytes

(Optional) VDC level output bytes

vdc_lvl_out_bps

(Optional) VDC level output bytes per second

vdc_lvl_out_pps

(Optional) VDC level output packets per second

mgmt_in_pkts

(Optional) Input packets

mgmt_in_bytes

(Optional) Input bytes

mgmt_in_mcast

(Optional) Input multicast frames

mgmt_in_compressed

(Optional) Input compressed

mgmt_in_errors

(Optional) Input errors

mgmt_in_frame

(Optional) Input frame errors

mgmt_in_overrun

(Optional) Input overrun

mgmt_in_fifo

(Optional) Input fifo

mgmt_out_pkts

(Optional) Output packets

mgmt_out_bytes

(Optional) Output bytes

mgmt_out_underruns

(Optional) Output overruns

mgmt_out_errors

(Optional) Output errors

mgmt_out_collisions

(Optional) Output collisions

mgmt_out_fifo

(Optional) Output fifo

mgmt_out_carrier

(Optional) Output carrier errors

mgmt_align_err

(Optional) Align error

mgmt_fcs_err

(Optional) FCS error

mgmt_xmit_err

(Optional) Transmit error

mgmt_rcv_err

(Optional) Receive error

mgmt_undersize

(Optional) Undersize

mgmt_outdisc

(Optional) Out discard

mgmt_single_col

(Optional) Single collision

mgmt_multi_col

(Optional) Multiple collision

mgmt_late_col

(Optional) Late collision

mgmt_excess_col

(Optional) Excess collision

mgmt_carri_sen

(Optional) Carrier sense

mgmt_runts

(Optional) Runts

mgmt_giants

(Optional) Giants

mgmt_sqetest_err

(Optional) SQETest error

mgmt_deferred_tx

(Optional) Deferred tx

mgmt_inmactx_err

(Optional) In MAC tx

mgmt_inmacrx_err

(Optional) In MAC rx

mgmt_symbol_err

(Optional) Symbol error

loop_in_pkts

(Optional) Input packets

loop_in_bytes

(Optional) Input bytes

loop_in_mcast

(Optional) Input multicast

loop_in_compressed

(Optional) Input compressed

loop_in_errors

(Optional) Input errors

loop_in_frame

(Optional) Input frame errors

loop_in_overrun

(Optional) Input overrun

loop_in_fifo

(Optional) Input fifo

loop_out_pkts

(Optional) Output packets

loop_out_bytes

(Optional) Output bytes

loop_out_underruns

(Optional) Output underruns

loop_out_errors

(Optional) Output errors

loop_out_collisions

(Optional) Output collisions

loop_out_fifo

(Optional) Output fifo

loop_out_carriers

(Optional) Output carrier errors

admin-state

(Optional)

tunnel-ipv4

(Optional) interface IPv4 address

mtu

(Optional) interface Maximum Transmission Unit

bandwidth

(Optional) interface Bandwidth in kilobits

encap-type

(Optional)

keepalive-period

(Optional) keealive period

keepalive-retries

(Optional) number of retries

src-ipv4

(Optional) tunnel source IPv4 address

src-intf

(Optional) tunnel source interface

dest-ipv4

(Optional) tunnel destination IPv4 address

dest-hostname

(Optional) tunnel destination hostname

vrf_name

(Optional) transport VRF name

wccp_header

(Optional) wccp header

ttl_val

(Optional) tunnel time to live value

tunnel_pmtud_age_time

(Optional) tunnel path MTU discovery age time

tunnel_pmtud_min_mtu

(Optional) tunnel path MTU discovery min mtu

tunnel_pmtud

(Optional) tunnel path MTU discovered

tunnel_pgm_mtu

(Optional) tunnel actual programmed MTU

tunnel_rx_pkt_count

(Optional) total number of packets received

tunnel_rx_byte_count

(Optional) total number of bytes received

tunnel_rx_rate

(Optional) packets input rate per 5 minutes

tunnel_tx_pkt_count

(Optional) total number of packets transmitted

tunnel_tx_byte_count

(Optional) total number of bytes transmitted

tunnel_tx_rate

(Optional) packets transmitted per 5 minutes

tunnel_clear_counter

(Optional) Last clearing of show interface counters

svi_if_index

(Optional) Interface

svi_admin_state

(Optional)

svi_rsn_desc

(Optional) Interface state reason detailed

svi_line_proto

(Optional)

svi_hw

(Optional) Hardware

svi_mac

(Optional) Address

svi_desc

(Optional) Interface Description

svi_ip_addr

(Optional) IP Address

svi_ip_mask

(Optional) IP address mask

svi_mtu

(Optional) MTU size in bytes

svi_bw

(Optional) Bandwidth in kilobits

svi_delay

(Optional) Throughput delay (tens of microseconds)

svi_tx_load

(Optional) Tx Load

svi_rx_load

(Optional) Rx Load

svi_carrier_delay_sec

(Optional) carrier delay value in seconds

svi_carrier_delay_msec

(Optional) carrier delay value in milli-seconds

svi_arp_type

(Optional) ARP type

svi_arp_timeout

(Optional) ARP timeout value

svi_time_last_cleared

(Optional) Time last cleared

TABLE_sec_vlan

(Optional) secondary vlans

sec_vlan

(Optional) vlan id

sec_vlan_type

(Optional) secondary vlan type

svi_reliability

(Optional) Reliability

overlay_addr

(Optional) Overlay address

overlay_addr_mask

(Optional) Overlay address mask

overlay_mtu

(Optional) MTU

overlay_bandwidth

(Optional) Bandwidth

overlay_encap_str

(Optional) Encap type

overlay_vrf

(Optional) VRF

overlay_src_addr

(Optional) Source address

overlay_dst_addr

(Optional) Destination address

overlay_last_link_flap

(Optional) Last link flap

overlay_clear_counters

(Optional) Last clearing of show interface counters

overlay_load_interval

(Optional) Load interval

overlay_rx_ucastpkts

(Optional) Received ucast pkts

overlay_rx_ucastbytes

(Optional) Received ucast bytes

overlay_rx_mcastpkts

(Optional) Received mcast pkts

overlay_rx_mcastbytes

(Optional) Received mcast bytes

overlay_rx_bcastpkts

(Optional) Received bcast pkts

overlay_rx_bcastbytes

(Optional) Received bcast bytes

overlay_rx_pkts

(Optional) Total received pkts

overlay_rx_bytes

(Optional) Total received bytes

overlay_rx_bitrate

(Optional) Receive bit rate

overlay_rx_pktrate

(Optional) Receive pkt rate

overlay_tx_ucastpkts

(Optional) Trasnmitted ucast pkts

overlay_tx_ucastbytes

(Optional) Trasnmitted ucast bytes

overlay_tx_mcastpkts

(Optional) Trasnmitted mcast pkts

overlay_tx_mcastbytes

(Optional) Trasnmitted mcast bytes

overlay_tx_bcastpkts

(Optional) Trasnmitted bcast pkts

overlay_tx_bcastbytes

(Optional) Trasnmitted bcast bytes

overlay_tx_pkts

(Optional) Total transmitted pkts

overlay_tx_bytes

(Optional) Total transmitted bytes

overlay_tx_bitrate

(Optional) Transmit bit rate

overlay_tx_pktrate

(Optional) Transmit pkt rate

Command Mode

- /exec

show interface

show interface <ifloop> [ __readonly__ TABLE_interface <interface> [ <state> ] [ <admin_state> ] [ <share_state> ] [ <state_rsn> ] [ <state_rsn_desc> ] [ <desc> ] [ <eth_bundle> ] [ <mgmt_sfp> ] [ <mgmt_type> ] [ <eth_eee_state> ] [ <eth_dce_mode> ] [ <vpc_status> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_encap_vlan> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_loopback> ] [ <eth_keepalive> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_mode> ] [ <eth_ratemode> ] [ <eth_autoneg> ] [ <eth_beacon> ] [ <eth_media> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_members> ] [ <eth_clk_mode> ] [ <eth_arp_type> ] [ <eth_arp_timeout> ] [ <eth_last_in> ] [ <eth_last_out> ] [ <eth_out_hang> ] [ <eth_clear_counters> ] [ <eth_link_flapped> ] [ <eth_inq_size> ] [ <eth_inq_max> ] [ <eth_inq_drops> ] [ <eth_inq_flush> ] [ <eth_out_drop> ] [ <eth_q_strategy> ] [ <eth_outq_size> ] [ <eth_outq_max> ] [ <eth_reset_cntr> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifloop

Enter interface type and number in module/slot format

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

admin_state

(Optional) Interface admin state

share_state

(Optional) Interface ownership

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

desc

(Optional) Interface description

mgmt_sfp

(Optional) mgmt sfp

mgmt_type

(Optional) mgmt type

eth_bundle

(Optional) Belongs to bundle

eth_eee_state

(Optional) EEE state

eth_dce_mode

(Optional) DCE mode description

vpc_status

(Optional) VPC status

eth_rsn_fac

(Optional) State reason facility

eth_rsn_code

(Optional) State reason code

eth_hw_desc

(Optional) HW description

eth_hw_addr

(Optional) HW address

eth_bia_addr

(Optional) bia address

eth_ip_addr

(Optional) IP Address

eth_ip_mask

(Optional) IP address mask

eth_ip_prefix

(Optional) IP Prefix

eth_mtu

(Optional) MTU

eth_bw

(Optional) Bandwidth

eth_encap_vlan

(Optional) Encapsulation Vlan

eth_dly

(Optional) Delay

eth_reliability

(Optional) Reliability

eth_txload

(Optional) Tx load

eth_rxload

(Optional) Rx load

eth_loopback

(Optional) Loopback

eth_keepalive

(Optional) Keepalive

eth_duplex

(Optional) Duplex

eth_speed

(Optional) Speed

eth_mode

(Optional) Port mode

eth_ratemode

(Optional) Rate mode

eth_autoneg

(Optional) Autonegotiation

eth_beacon

(Optional) Beacon

eth_media

(Optional) Media type

eth_in_flowctrl

(Optional) Input flowcontrol

eth_out_flowctrl

(Optional) Output flowcontrol

eth_mdix

(Optional) Mdix

eth_swt_monitor

(Optional) Switchport Monitor

eth_ethertype

(Optional) EtherType

eth_members

(Optional) Members in this channel

eth_clk_mode

(Optional) Clock mode

eth_arp_type

(Optional) ARP type

eth_arp_timeout

(Optional) ARP timeout

eth_last_in

(Optional) Last input

eth_last_out

(Optional) Last output

eth_out_hang

(Optional) Last output hang

eth_clear_counters

(Optional) Last clearing of show interface counters

eth_link_flapped

(Optional) Last link flapped

eth_inq_size

(Optional) Input queue size

eth_inq_max

(Optional) Input queue max

eth_inq_drops

(Optional) Input queue drops

eth_inq_flush

(Optional) Input queue flushes

eth_out_drop

(Optional) Output drops

eth_q_strategy

(Optional) Queueing strategy

eth_outq_size

(Optional) Output queue size

eth_outq_max

(Optional) Output queue max

eth_reset_cntr

(Optional) Interface resets

loop_in_pkts

(Optional) Input packets

loop_in_bytes

(Optional) Input bytes

loop_in_mcast

(Optional) Input multicast

loop_in_compressed

(Optional) Input compressed

loop_in_errors

(Optional) Input errors

loop_in_frame

(Optional) Input frame errors

loop_in_overrun

(Optional) Input overrun

loop_in_fifo

(Optional) Input fifo

loop_out_pkts

(Optional) Output packets

loop_out_bytes

(Optional) Output bytes

loop_out_underruns

(Optional) Output underruns

loop_out_errors

(Optional) Output errors

loop_out_collisions

(Optional) Output collisions

loop_out_fifo

(Optional) Output fifo

loop_out_carriers

(Optional) Output carrier errors

Command Mode

- /exec

show interface

show interface <iftun_desc> [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <desc> ] <admin-state> { <tunnel-ipv4> | <tunnel-ipv6> } <mtu> <bandwidth> <encap-type> <keepalive-period> <keepalive-retries> { <src-ipv4> | <src-ipv6> } <src-intf> { <dest-ipv4> | <dest-ipv6> } <dest-hostname> <vrf_name> <wccp_header> <ttl_val> <tunnel_pmtud_age_time> <tunnel_pmtud_min_mtu> <tunnel_pmtud> <tunnel_pgm_mtu> <tunnel_rx_pkt_count> <tunnel_rx_byte_count> <tunnel_rx_rate> <tunnel_tx_pkt_count> <tunnel_tx_byte_count> <tunnel_tx_rate> <tunnel_clear_counter> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

iftun_desc

Enter tunnel interface number

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

desc

(Optional) Interface description

admin-state

(Optional)

tunnel-ipv4

(Optional) interface IPv4 address

mtu

(Optional) interface Maximum Transmission Unit

bandwidth

(Optional) interface Bandwidth in kilobits

encap-type

(Optional)

keepalive-period

(Optional) keealive period

keepalive-retries

(Optional) number of retries

src-ipv4

(Optional) tunnel source IPv4 address

src-intf

(Optional) tunnel source interface

dest-ipv4

(Optional) tunnel destination IPv4 address

dest-hostname

(Optional) tunnel destination hostname

vrf_name

(Optional) transport VRF name

wccp_header

(Optional) wccp header

ttl_val

(Optional) tunnel time to live value

tunnel_pmtud_age_time

(Optional) tunnel path MTU discovery age time

tunnel_pmtud_min_mtu

(Optional) tunnel path MTU discovery min mtu

tunnel_pmtud

(Optional) tunnel path MTU discovered

tunnel_pgm_mtu

(Optional) tunnel actual programmed MTU

tunnel_rx_pkt_count

(Optional) total number of packets received

tunnel_rx_byte_count

(Optional) total number of bytes received

tunnel_rx_rate

(Optional) packets input rate per 5 minutes

tunnel_tx_pkt_count

(Optional) total number of packets transmitted

tunnel_tx_byte_count

(Optional) total number of bytes transmitted

tunnel_tx_rate

(Optional) packets transmitted per 5 minutes

tunnel_clear_counter

(Optional) Last clearing of show interface counters

Command Mode

- /exec

show interface

show interface <ifeth> [ quick ] [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <state_rsn> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <admin_state> ] [ <share_state> ] [ <parent_interface> ] [ <vpc_status> ] [ <eth_bundle> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_encap_vlan> ] [ <medium> ] [ <eth_mode> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_media> ] [ <eth_beacon> ] [ <eth_autoneg> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_ratemode> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_eee_state> ] [ <eth_members> ] [ <eth_link_flapped> ] [ <eth_clear_counters> ] [ <eth_reset_cntr> ] [ <eth_load_interval1> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_load_interval2> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_load_interval3> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_jumbo_inpkts> ] [ <eth_storm_supp> ] [ <eth_runts> ] [ <eth_giants> ] [ <eth_crc> ] [ <eth_nobuf> ] [ <eth_inerr> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_dribble> ] [ <eth_indiscard> ] [ <eth_inpause> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_jumbo_outpkts> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_deferred> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_outdiscard> ] [ <eth_outpause> ] <switchport> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth

Enter interface type and number in module/slot format

quick

(Optional) Show info of interface skipping stats

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

state_rsn

(Optional) Interface state reason

eth_rsn_fac

(Optional) State reason facility

eth_rsn_code

(Optional) State reason code

admin_state

(Optional) admin state

share_state

(Optional) Interface ownership

parent_interface

(Optional) parent interface

vpc_status

(Optional) VPC status

eth_bundle

(Optional) Belongs to bundle

eth_hw_desc

(Optional) HW description

eth_hw_addr

(Optional) HW address

eth_bia_addr

(Optional) bia address

desc

(Optional) Interface description

eth_ip_addr

(Optional) IP Address

eth_ip_mask

(Optional) IP address mask

eth_ip_prefix

(Optional) IP address prefix

eth_mtu

(Optional) MTU

eth_bw

(Optional) Bandwidth

eth_dly

(Optional) Delay

eth_reliability

(Optional) Reliability

eth_txload

(Optional) Tx load

eth_rxload

(Optional) Rx load

eth_encap_vlan

(Optional) Encapsulation Vlan

medium

(Optional) medium type

eth_mode

(Optional) Port mode

eth_duplex

(Optional) Duplex

eth_speed

(Optional) Speed

eth_media

(Optional) Media type

eth_beacon

(Optional) Beacon

eth_autoneg

(Optional) Autonegotiation

eth_in_flowctrl

(Optional) Input flowcontrol

eth_out_flowctrl

(Optional) Output flowcontrol

eth_mdix

(Optional) Mdix

eth_ratemode

(Optional) Rate mode

eth_swt_monitor

(Optional) Switchport Monitor

eth_ethertype

(Optional) EtherType

eth_eee_state

(Optional) EEE state

eth_members

(Optional) Members in this channel

eth_link_flapped

(Optional) Last link flapped

eth_clear_counters

(Optional) Last clearing of show interface counters

eth_reset_cntr

(Optional) Interface resets

eth_load_interval1

(Optional) interval 1 timer value in sec

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_load_interval2

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_load_interval3

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_l2_ucastpkts

(Optional) L2 switched ucast pkts

eth_l2_ucastbytes

(Optional) L2 switched ucast bytes

eth_l2_mcastpkts

(Optional) L2 switched mcast pkts

eth_l2_mcastbytes

(Optional) L2 switched mcast bytes

eth_l2_bcastpkts

(Optional) L2 switched bcast pkts

eth_l2_bcastbytes

(Optional) L2 switched bcast bytes

eth_l3in_ucastpkts

(Optional) L3 in switched ucast pkts

eth_l3in_ucastbytes

(Optional) L3 in switched ucast bytes

eth_l3in_mcastpkts

(Optional) L3 in switched mcast pkts

eth_l3in_mcastbytes

(Optional) L3 in switched mcast bytes

eth_l3in_bcastpkts

(Optional) L3 in switched bcast pkts

eth_l3in_bcastbytes

(Optional) L3 in switched bcast bytes

eth_l3out_ucastpkts

(Optional) L3 out switched ucast pkts

eth_l3out_ucastbytes

(Optional) L3 out switched ucast bytes

eth_l3out_mcastpkts

(Optional) L3 out switched mcast pkts

eth_l3out_mcastbytes

(Optional) L3 out switched mcast bytes

eth_l3out_bcastpkts

(Optional) L3 out switched bcast pkts

eth_l3out_bcastbytes

(Optional) L3 out switched bcast bytes

eth_l3in_routed_pkts

(Optional) L3 in routed pkts

eth_l3in_routed_bytes

(Optional) L3 in routed bytes

eth_l3out_routed_pkts

(Optional) L3 out routed pkts

eth_l3out_routed_bytes

(Optional) L3 out routed bytes

eth_l3avg1_inbytes

(Optional) Load interval 1 L3 average in switched bytes

eth_l3avg1_inpkts

(Optional) Load interval 1 L3 average in switched pkts

eth_l3avg1_outbytes

(Optional) Load interval 1 L3 average out switched bytes

eth_l3avg1_outpkts

(Optional) Load interval 1 L3 average out switched pkts

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_jumbo_inpkts

(Optional) Incoming jumbo pkts

eth_storm_supp

(Optional) storm suppression

eth_runts

(Optional) runts

eth_giants

(Optional) giants

eth_crc

(Optional) CRC

eth_nobuf

(Optional) No buffer received

eth_inerr

(Optional) input errors

eth_frame

(Optional) frame

eth_overrun

(Optional) overrun

eth_underrun

(Optional) underruns

eth_ignored

(Optional) ignored

eth_watchdog

(Optional) watchdog

eth_bad_eth

(Optional) bad ether type drop

eth_bad_proto

(Optional) bad protocol drops

eth_in_ifdown_drops

(Optional) Input if-down drops

eth_dribble

(Optional) input packets with dribble condition

eth_indiscard

(Optional) discards

eth_inpause

(Optional) pause input

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_outpkts

(Optional) packets output

eth_outbytes

(Optional) bytes output

eth_jumbo_outpkts

(Optional) Outgoing jumbo pkts

eth_outerr

(Optional) output errors

eth_coll

(Optional) collisions

eth_deferred

(Optional) deferred

eth_latecoll

(Optional) late collision

eth_lostcarrier

(Optional) lost carrier

eth_nocarrier

(Optional) no carrier

eth_babbles

(Optional) babbles

eth_outdiscard

(Optional) output discard

eth_outpause

(Optional) PAUSE output

switchport

(Optional) Switchport enabled

Command Mode

- /exec

show interface

show interface <ifrange> [ __readonly__ TABLE_interface <interface> <state> <state_rsn> <state_rsn_desc> <desc> [ <overlay_addr> ] [ <overlay_addr_mask> ] [ <overlay_mtu> ] [ <overlay_bandwidth> ] [ <overlay_encap_str> ] [ <overlay_vrf> ] [ <overlay_src_addr> ] [ <overlay_dst_addr> ] [ <overlay_last_link_flap> ] [ <overlay_clear_counters> ] [ <overlay_load_interval> ] [ <overlay_rx_ucastpkts> ] [ <overlay_rx_ucastbytes> ] [ <overlay_rx_mcastpkts> ] [ <overlay_rx_mcastbytes> ] [ <overlay_rx_pkts> ] [ <overlay_rx_bytes> ] [ <overlay_rx_bcastpkts> ] [ <overlay_rx_bcastbytes> ] [ <overlay_rx_bitrate> ] [ <overlay_rx_pktrate> ] [ <overlay_tx_ucastpkts> ] [ <overlay_tx_ucastbytes> ] [ <overlay_tx_mcastpkts> ] [ <overlay_tx_mcastbytes> ] [ <overlay_tx_bcastpkts> ] [ <overlay_tx_bcastbytes> ] [ <overlay_tx_pkts> ] [ <overlay_tx_bytes> ] [ <overlay_tx_bitrate> ] [ <overlay_tx_pktrate> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

desc

(Optional) Interface description

overlay_addr

(Optional) Overlay address

overlay_addr_mask

(Optional) Overlay address mask

overlay_mtu

(Optional) MTU

overlay_bandwidth

(Optional) Bandwidth

overlay_encap_str

(Optional) Encap type

overlay_vrf

(Optional) VRF

overlay_src_addr

(Optional) Source address

overlay_dst_addr

(Optional) Destination address

overlay_last_link_flap

(Optional) Last link flap

overlay_clear_counters

(Optional) Last clearing of show interface counters

overlay_load_interval

(Optional) Load interval

overlay_rx_ucastpkts

(Optional) Received ucast pkts

overlay_rx_ucastbytes

(Optional) Received ucast bytes

overlay_rx_mcastpkts

(Optional) Received mcast pkts

overlay_rx_mcastbytes

(Optional) Received mcast bytes

overlay_rx_bcastpkts

(Optional) Received bcast pkts

overlay_rx_bcastbytes

(Optional) Received bcast bytes

overlay_rx_pkts

(Optional) Total received pkts

overlay_rx_bytes

(Optional) Total received bytes

overlay_rx_bitrate

(Optional) Receive bit rate

overlay_rx_pktrate

(Optional) Receive pkt rate

overlay_tx_ucastpkts

(Optional) Trasnmitted ucast pkts

overlay_tx_ucastbytes

(Optional) Trasnmitted ucast bytes

overlay_tx_mcastpkts

(Optional) Trasnmitted mcast pkts

overlay_tx_mcastbytes

(Optional) Trasnmitted mcast bytes

overlay_tx_bcastpkts

(Optional) Trasnmitted bcast pkts

overlay_tx_bcastbytes

(Optional) Trasnmitted bcast bytes

overlay_tx_pkts

(Optional) Total transmitted pkts

overlay_tx_bytes

(Optional) Total transmitted bytes

overlay_tx_bitrate

(Optional) Transmit bit rate

overlay_tx_pktrate

(Optional) Transmit pkt rate

Command Mode

- /exec

show interface

show interface <ifrange> [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <state_rsn> ] [ <admin_state> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <share_state> ] [ <vpc_status> ] [ <eth_bundle> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_encap_vlan> ] [ <eth_mode> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_media> ] [ <eth_beacon> ] [ <eth_autoneg> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_ratemode> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_members> ] [ <eth_link_flapped> ] [ <eth_clear_counters> ] [ <eth_reset_cntr> ] [ <nve_addr> ] [ <nve_addr_mask> ] [ <nve_vcid> ] [ <nve_mtu> ] [ <nve_bandwidth> ] [ <nve_encap_str> ] [ <nve_vrf> ] [ <nve_src_addr> ] [ <nve_dst_addr> ] [ <nve_last_link_flap> ] [ <nve_clear_counters> ] [ <nve_load_interval> ] [ <nve_rx_ucastpkts> ] [ <nve_rx_ucastbytes> ] [ <nve_rx_mcastpkts> ] [ <nve_rx_mcastbytes> ] [ <nve_rx_pkts> ] [ <nve_rx_bytes> ] [ <nve_rx_bcastpkts> ] [ <nve_rx_bcastbytes> ] [ <nve_rx_bitrate> ] [ <nve_rx_pktrate> ] [ <nve_tx_ucastpkts> ] [ <nve_tx_ucastbytes> ] [ <nve_tx_mcastpkts> ] [ <nve_tx_mcastbytes> ] [ <nve_tx_bcastpkts> ] [ <nve_tx_bcastbytes> ] [ <nve_tx_pkts> ] [ <nve_tx_bytes> ] [ <nve_tx_bitrate> ] [ <nve_tx_pktrate> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

state_rsn

(Optional) Interface state reason

admin_state

(Optional) admin state

eth_rsn_fac

(Optional) State reason facility

eth_rsn_code

(Optional) State reason code

share_state

(Optional) Interface ownership

vpc_status

(Optional) VPC status

eth_bundle

(Optional) Belongs to bundle

eth_hw_desc

(Optional) HW description

eth_hw_addr

(Optional) HW address

eth_bia_addr

(Optional) bia address

desc

(Optional) Interface description

eth_ip_addr

(Optional) IP Address

eth_ip_mask

(Optional) IP address mask

eth_mtu

(Optional) MTU

eth_bw

(Optional) Bandwidth

eth_dly

(Optional) Delay

eth_reliability

(Optional) Reliability

eth_txload

(Optional) Tx load

eth_rxload

(Optional) Rx load

eth_encap_vlan

(Optional) Encapsulation Vlan

eth_mode

(Optional) Port mode

eth_duplex

(Optional) Duplex

eth_speed

(Optional) Speed

eth_media

(Optional) Media type

eth_beacon

(Optional) Beacon

eth_autoneg

(Optional) Autonegotiation

eth_in_flowctrl

(Optional) Input flowcontrol

eth_out_flowctrl

(Optional) Output flowcontrol

eth_mdix

(Optional) Mdix

eth_ratemode

(Optional) Rate mode

eth_swt_monitor

(Optional) Switchport Monitor

eth_ethertype

(Optional) EtherType

eth_members

(Optional) Members in this channel

eth_link_flapped

(Optional) Last link flapped

eth_clear_counters

(Optional) Last clearing of show interface counters

eth_reset_cntr

(Optional) Interface resets

nve_addr

(Optional) Peer address

nve_addr_mask

(Optional) Peer address mask

nve_vcid

(Optional) VCID

nve_mtu

(Optional) MTU

nve_bandwidth

(Optional) Bandwidth

nve_encap_str

(Optional) Encap type

nve_vrf

(Optional) VRF

nve_src_addr

(Optional) Source address

nve_dst_addr

(Optional) Destination address

nve_last_link_flap

(Optional) Last link flap

nve_clear_counters

(Optional) Last clearing of show interface counters

nve_load_interval

(Optional) Load interval

nve_rx_ucastpkts

(Optional) Received ucast pkts

nve_rx_ucastbytes

(Optional) Received ucast bytes

nve_rx_mcastpkts

(Optional) Received mcast pkts

nve_rx_mcastbytes

(Optional) Received mcast bytes

nve_rx_bcastpkts

(Optional) Received bcast pkts

nve_rx_bcastbytes

(Optional) Received bcast bytes

nve_rx_pkts

(Optional) Total received pkts

nve_rx_bytes

(Optional) Total received bytes

nve_rx_bitrate

(Optional) Receive bit rate

nve_rx_pktrate

(Optional) Receive pkt rate

nve_tx_ucastpkts

(Optional) Trasnmitted ucast pkts

nve_tx_ucastbytes

(Optional) Trasnmitted ucast bytes

nve_tx_mcastpkts

(Optional) Trasnmitted mcast pkts

nve_tx_mcastbytes

(Optional) Trasnmitted mcast bytes

nve_tx_bcastpkts

(Optional) Trasnmitted bcast pkts

nve_tx_bcastbytes

(Optional) Trasnmitted bcast bytes

nve_tx_pkts

(Optional) Total transmitted pkts

nve_tx_bytes

(Optional) Total transmitted bytes

nve_tx_bitrate

(Optional) Transmit bit rate

nve_tx_pktrate

(Optional) Transmit pkt rate

Command Mode

- /exec

show interface brief

show interface <ifpch_brf> brief [ __readonly__ TABLE_interface <interface> [ <vlan> ] <type> <portmode> <state> <state_rsn_desc> <speed> <ratemode> [ <proto> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifpch_brf

Enter interface type and number in module/slot format

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

vlan

(Optional) Vlan

type

(Optional) Type

portmode

(Optional) Port mode

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

speed

(Optional) Speed

ratemode

(Optional) Interface port speed

proto

(Optional) Port Channel Protocol

Command Mode

- /exec

show interface brief

show interface brief [ controller | cli ] [ __readonly__ TABLE_interface [ <interface> ] [ <vlan> ] [ <type> ] [ <portmode> ] [ <state> ] [ <state_rsn> ] [ <state_rsn_desc> ] [ <desc> ] [ <vrf> ] [ <ipv6_addr> ] [ <ip_addr> ] [ <speed> ] [ <mtu> ] [ <ratemode> ] [ <portchan> ] [ <proto> ] [ <interface_vfc> ] [ <vsan_brief> ] [ <admin_mode> ] [ <admin_trunk_mode> ] [ <status> ] [ <fcot_info> ] [ <bind_info> ] [ <bind_type> ] [ <port_rate_mode> ] [ <oper_speed> ] [ <port_channel> ] [ <ip_addr1> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

brief

Show brief info of interface

controller

(Optional) Show controller configured interfaces

cli

(Optional) Show CLI configured interfaces

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

desc

(Optional) Interface description

vrf

(Optional) Vrf membership

ip_addr

(Optional) IP address

mtu

(Optional) MTU

speed

(Optional) Speed

vlan

(Optional) Vlan

type

(Optional) Type

portmode

(Optional) Port mode

ratemode

(Optional) Interface port speed

portchan

(Optional) Port Channel Membership

proto

(Optional) Port Channel Protocol

interface_vfc

(Optional) Interface index

vsan_brief

(Optional) vsan brief

admin_mode

(Optional) admin mode

admin_trunk_mode

(Optional) admin trunk mode

status

(Optional) status

fcot_info

(Optional) fcot info

bind_info

(Optional) bind interface

bind_type

(Optional) bind type

port_rate_mode

(Optional) rate mode

oper_speed

(Optional) speed

port_channel

(Optional) port channel number

ip_addr1

(Optional) IP address

Command Mode

- /exec

show interface brief

show interface <ifloop_brf> brief [ __readonly__ TABLE_interface <interface> <state> [ <desc> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifloop_brf

Enter interface type and number in module/slot format

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

desc

(Optional) Interface description

Command Mode

- /exec

show interface brief

show interface <iftunnel_brf> brief [ __readonly__ TABLE_interface <interface> <state> <admin-state> { <tunnel-ipv4> | <tunnel-ipv6> } <mtu> <bandwidth> <encap-type> <keepalive-period> <keepalive-retries> { <src-ipv4> | <src-ipv6> } <src-intf> { <dest-ipv4> | <dest-ipv6> } <dest-hostname> <vrf_name> <wccp_header> <ttl_val> <tunnel_pmtud_age_time> <tunnel_pmtud_min_mtu> <tunnel_pmtud> <tunnel_pgm_mtu> <tunnel_rx_pkt_count> <tunnel_rx_byte_count> <tunnel_rx_rate> <tunnel_tx_pkt_count> <tunnel_tx_byte_count> <tunnel_tx_rate> <tunnel_clear_counter> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

iftunnel_brf

Enter interface type and number in module/slot format

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

admin-state

(Optional)

tunnel-ipv4

(Optional) interface IPv4 address

mtu

(Optional) interface Maximum Transmission Unit

bandwidth

(Optional) interface Bandwidth in kilobits

encap-type

(Optional)

keepalive-period

(Optional) keealive period

keepalive-retries

(Optional) number of retries

src-ipv4

(Optional) tunnel source IPv4 address

src-intf

(Optional) tunnel source interface

dest-ipv4

(Optional) tunnel destination IPv4 address

dest-hostname

(Optional) tunnel destination hostname

vrf_name

(Optional) transport VRF name

wccp_header

(Optional) wccp header

ttl_val

(Optional) tunnel time to live value

tunnel_pmtud_age_time

(Optional) tunnel path MTU discovery age time

tunnel_pmtud_min_mtu

(Optional) tunnel path MTU discovery min mtu

tunnel_pmtud

(Optional) tunnel path MTU discovered

tunnel_pgm_mtu

(Optional) tunnel actual programmed MTU

tunnel_rx_pkt_count

(Optional) total number of packets received

tunnel_rx_byte_count

(Optional) total number of bytes received

tunnel_rx_rate

(Optional) packets input rate per 5 minutes

tunnel_tx_pkt_count

(Optional) total number of packets transmitted

tunnel_tx_byte_count

(Optional) total number of bytes transmitted

tunnel_tx_rate

(Optional) packets transmitted per 5 minutes

tunnel_clear_counter

(Optional) Last clearing of show interface counters

Command Mode

- /exec

show interface brief

show interface <ifmgmt_brf> brief [ __readonly__ TABLE_interface <interface> [ <vrf> ] <state> [ <ipv6_addr> ] [ <ip_addr> ] <mtu> <speed> [ <duplex> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifmgmt_brf

Enter interface type and number in module/slot format

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

vrf

(Optional) Vrf membership

state

(Optional) Interface state

ip_addr

(Optional) IP address

mtu

(Optional) MTU

speed

(Optional) Speed

duplex

(Optional) Duplex

Command Mode

- /exec

show interface brief

show interface <ifeth_brf> brief [ __readonly__ TABLE_interface <interface> [ <vlan> ] <type> <portmode> <state> <state_rsn_desc> <speed> <ratemode> [ <portchan> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_brf

Enter interface type and number in module/slot format

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

vlan

(Optional) Vlan

type

(Optional) Type

portmode

(Optional) Port mode

state

(Optional) Interface state

state_rsn_desc

(Optional) Interface state reason detailed

speed

(Optional) Speed

ratemode

(Optional) Interface port speed

portchan

(Optional) Port Channel Membership

Command Mode

- /exec

show interface brief

show interface <ifrange> brief [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn> ] [ <state_rsn_desc> ] [ <overlay_mtu> ] [ <overlay_bandwidth> ] [ <overlay_vrf> ] [ <overlay_src_addr> ] [ <overlay_dst_addr> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

overlay_mtu

(Optional) MTU

overlay_bandwidth

(Optional) Bandwidth

overlay_vrf

(Optional) VRF

overlay_src_addr

(Optional) Source address

overlay_dst_addr

(Optional) Destination address

Command Mode

- /exec

show interface brief

show interface <ifrange> brief [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn> ] [ <state_rsn_desc> ] [ <admin_state> ] [ <nve_addr> ] [ <nve_vcid> ] [ <nve_mtu> ] [ <nve_bandwidth> ] [ <nve_vrf> ] [ <nve_src_addr> ] [ <nve_dst_addr> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number

brief

Show brief info of interface

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

admin_state

(Optional) admin state

nve_addr

(Optional) Peer address

nve_vcid

(Optional) VCID

nve_mtu

(Optional) MTU

nve_bandwidth

(Optional) Bandwidth

nve_vrf

(Optional) VRF

nve_src_addr

(Optional) Source address

nve_dst_addr

(Optional) Destination address

Command Mode

- /exec

show interface cable-diagnostics-tdr

show interface <ifid_tdr> cable-diagnostics-tdr [ __readonly__ TABLE_interface <interface> <speed> <distance1> <pair1_status> <distance2> <pair2_status> <distance3> <pair3_status> <distance4> <pair4_status> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_tdr

Enter interface type and number in module/slot format

cable-diagnostics-tdr

Show interface tdr test information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

speed

(Optional) Speed

distance1

(Optional) Distance to fault for pair 1

distance2

(Optional) Distance to fault for pair 2

distance3

(Optional) Distance to fault for pair 3

distance4

(Optional) Distance to fault for pair 4

pair1_status

(Optional) Pair1 status

pair2_status

(Optional) Pair2 status

pair3_status

(Optional) Pair3 status

pair4_status

(Optional) Pair4 status

Command Mode

- /exec

show interface capabilities

show interface <ifid_eth_cap> capabilities [ __readonly__ TABLE_interface <interface> <model> <type> <speed> <duplex> <trunk_encap> <dce_capable> <channel> <bcast_supp> <flo_ctrl> <rate_mode> <port_mode> [ <fast_start> ] <qos_scheduling> <cos_rewrite> <tos_rewrite> [ <inline_power> ] <span> <udld> [ <mdix> ] [ <tdr> ] <lnk_debounce> <lnk_debounce_time> <fex_fabric> <dot1q_tunnel> [ <pvlan_trunk_mode> ] [ <port_group> ] [ <port_group_members> ] <eee_capable> <pfc_capable> <speed_group_capable> <buffer_boost_capable> [ <bkout_capable> ] [ <macsec_capable> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_eth_cap

Enter interface type and number in module/slot format

capabilities

Show interface capabilities information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

model

(Optional) Model

type

(Optional) Type

speed

(Optional) Speed

duplex

(Optional) Duplex

trunk_encap

(Optional) Trunk encap. type

dce_capable

(Optional) DCE mode capable

channel

(Optional) Channel

bcast_supp

(Optional) Broadcast suppression

flo_ctrl

(Optional) Flowcontrol

rate_mode

(Optional) Rate mode

port_mode

(Optional) Port mode

fast_start

(Optional) Fast start

qos_scheduling

(Optional) QOS scheduling

cos_rewrite

(Optional) CoS rewrite

tos_rewrite

(Optional) ToS rewrite

inline_power

(Optional) Inline power

span

(Optional) SPAN

udld

(Optional) UDLD

mdix

(Optional) MDIX

tdr

(Optional) TDR

lnk_debounce

(Optional) Link debounce

lnk_debounce_time

(Optional) Link debounce time

fex_fabric

(Optional) FEX Fabric

dot1q_tunnel

(Optional) dot1q-tunnel

pvlan_trunk_mode

(Optional) Private-vlan trunk mode

port_group

(Optional) Port Group

port_group_members

(Optional) Port Group Members

eee_capable

(Optional) EEE (efficient-eth)

pfc_capable

(Optional) PFC Capable:

bkout_capable

(Optional) Breakout Capable:

buffer_boost_capable

(Optional) Buffer Boost Capable:

speed_group_capable

(Optional) Speed group capable

macsec_capable

(Optional) MACSEC capable

Command Mode

- /exec

show interface capabilities

show interface capabilities [ __readonly__ TABLE_interface <interface> <model> <type> <speed> <duplex> <trunk_encap> <dce_capable> <channel> <bcast_supp> <flo_ctrl> <rate_mode> <port_mode> [ <fast_start> ] <qos_scheduling> <cos_rewrite> <tos_rewrite> [ <inline_power> ] <span> <udld> [ <mdix> ] [ <tdr> ] <lnk_debounce> <lnk_debounce_time> <fex_fabric> <dot1q_tunnel> [ <pvlan_trunk_mode> ] [ <port_group> ] [ <port_group_members> ] <eee_capable> <pfc_capable> <speed_group_capable> <buffer_boost_capable> [ <bkout_capable> ] [ <macsec_capable> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

capabilities

Show interface capabilities information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

model

(Optional) Model

type

(Optional) Type

speed

(Optional) Speed

duplex

(Optional) Duplex

trunk_encap

(Optional) Trunk encap. type

dce_capable

(Optional) DCE mode capable

channel

(Optional) Channel

bcast_supp

(Optional) Broadcast suppression

flo_ctrl

(Optional) Flowcontrol

rate_mode

(Optional) Rate mode

port_mode

(Optional) Port mode

fast_start

(Optional) Fast start

qos_scheduling

(Optional) QOS scheduling

cos_rewrite

(Optional) CoS rewrite

tos_rewrite

(Optional) ToS rewrite

inline_power

(Optional) Inline power

span

(Optional) SPAN

udld

(Optional) UDLD

mdix

(Optional) MDIX

tdr

(Optional) TDR

lnk_debounce

(Optional) Link debounce

lnk_debounce_time

(Optional) Link debounce time

fex_fabric

(Optional) FEX Fabric

dot1q_tunnel

(Optional) dot1q-tunnel

pvlan_trunk_mode

(Optional) Private-vlan trunk mode

port_group

(Optional) Port Group

port_group_members

(Optional) Port Group Members

eee_capable

(Optional) EEE (efficient-eth)

pfc_capable

(Optional) PFC Capable:

bkout_capable

(Optional) Breakout Capable:

buffer_boost_capable

(Optional) Buffer Boost Capable:

speed_group_capable

(Optional) Speed group capable

macsec_capable

(Optional) MACSEC capable

Command Mode

- /exec

show interface counters

show interface <ifid_ctr> counters [ snmp ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] } { TABLE_tx_counters <interface_tx> [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] } ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_ctr

Enter interface type and number in module/slot format

counters

Show interface counters

snmp

(Optional) Show SNMP MIB values

__readonly__

(Optional) Read Only

interface_rx

(Optional) Interface index rx

interface_tx

(Optional) Interface index tx

TABLE_rx_counters

(Optional) show Rx counters

TABLE_tx_counters

(Optional) show Tx counters

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_outpkts

(Optional) Packets output

eth_outbytes

(Optional) Bytes output

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

Command Mode

- /exec

show interface counters

show interface counters [ module <module> ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

__readonly__

(Optional) Read Only

interface_rx

(Optional) Interface index rx

interface_tx

(Optional) Interface index tx

TABLE_rx_counters

(Optional) show Rx counters

TABLE_tx_counters

(Optional) show Tx counters

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_outpkts

(Optional) Packets output

eth_outbytes

(Optional) Bytes output

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_l3in_bytes

(Optional) L3 Rx bytes

eth_l3in_ucastpkts

(Optional) L3 Rx Unicast pkts

eth_l3in_mcastpkts

(Optional) L3 Rx Multicast pkts

eth_l3in_bcastpkts

(Optional) L3 Rx Broadcast pkts

eth_l3out_bytes

(Optional) L3 Tx bytes

eth_l3out_ucastpkts

(Optional) L3 Tx Unicast pkts

eth_l3out_mcastpkts

(Optional) L3 Tx Multicast pkts

eth_l3out_bcastpkts

(Optional) L3 Tx Broadcast pkts

Command Mode

- /exec

show interface counters

show interface counters [ non-zero ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

non-zero

(Optional) To display only the non-zero counter values

__readonly__

(Optional) Read Only

interface_rx

(Optional) Interface index rx

interface_tx

(Optional) Interface index tx

TABLE_rx_counters

(Optional) show Rx counters

TABLE_tx_counters

(Optional) show Tx counters

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_outpkts

(Optional) Packets output

eth_outbytes

(Optional) Bytes output

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_l3in_bytes

(Optional) L3 Rx bytes

eth_l3in_ucastpkts

(Optional) L3 Rx Unicast pkts

eth_l3in_mcastpkts

(Optional) L3 Rx Multicast pkts

eth_l3in_bcastpkts

(Optional) L3 Rx Broadcast pkts

eth_l3out_bytes

(Optional) L3 Tx bytes

eth_l3out_ucastpkts

(Optional) L3 Tx Unicast pkts

eth_l3out_mcastpkts

(Optional) L3 Tx Multicast pkts

eth_l3out_bcastpkts

(Optional) L3 Tx Broadcast pkts

Command Mode

- /exec

show interface counters

show interface <ifeth_ctr> counters [ snmp ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_ctr

Enter interface type and number in module/slot format

counters

Show interface counters

snmp

(Optional) Show SNMP MIB values

__readonly__

(Optional) Read Only

interface_rx

(Optional) Interface index rx

interface_tx

(Optional) Interface index tx

TABLE_rx_counters

(Optional) show Rx counters

TABLE_tx_counters

(Optional) show Tx counters

eth_inbytes

(Optional) Bytes input

eth_inucast

(Optional) Unicasts input

eth_inmcast

(Optional) Multicasts input

eth_inbcast

(Optional) Broadcasts input

eth_outbytes

(Optional) Bytes output

eth_outucast

(Optional) Unicasts output

eth_outmcast

(Optional) Multicasts output

eth_outbcast

(Optional) Broadcasts output

eth_l3in_bytes

(Optional) L3 Rx bytes

eth_l3in_ucastpkts

(Optional) L3 Rx Unicast pkts

eth_l3in_mcastpkts

(Optional) L3 Rx Multicast pkts

eth_l3in_bcastpkts

(Optional) L3 Rx Broadcast pkts

eth_l3out_bytes

(Optional) L3 Tx bytes

eth_l3out_ucastpkts

(Optional) L3 Tx Unicast pkts

eth_l3out_mcastpkts

(Optional) L3 Tx Multicast pkts

eth_l3out_bcastpkts

(Optional) L3 Tx Broadcast pkts

Command Mode

- /exec

show interface counters

show interface <ifrange> counters [ __readonly__ TABLE_interface <interface> [ <overlay_load_interval> ] [ <overlay_rx_ucastpkts> ] [ <overlay_rx_ucastbytes> ] [ <overlay_rx_mcastpkts> ] [ <overlay_rx_mcastbytes> ] [ <overlay_rx_pkts> ] [ <overlay_rx_bytes> ] [ <overlay_rx_bcastpkts> ] [ <overlay_rx_bcastbytes> ] [ <overlay_rx_bitrate> ] [ <overlay_rx_pktrate> ] [ <overlay_tx_ucastpkts> ] [ <overlay_tx_ucastbytes> ] [ <overlay_tx_mcastpkts> ] [ <overlay_tx_mcastbytes> ] [ <overlay_tx_bcastpkts> ] [ <overlay_tx_bcastbytes> ] [ <overlay_tx_pkts> ] [ <overlay_tx_bytes> ] [ <overlay_tx_bitrate> ] [ <overlay_tx_pktrate> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number

counters

Show interface counters

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

overlay_load_interval

(Optional) Load interval

overlay_rx_ucastpkts

(Optional) Received ucast pkts

overlay_rx_ucastbytes

(Optional) Received ucast bytes

overlay_rx_mcastpkts

(Optional) Received mcast pkts

overlay_rx_mcastbytes

(Optional) Received mcast bytes

overlay_rx_bcastpkts

(Optional) Received bcast pkts

overlay_rx_bcastbytes

(Optional) Received bcast bytes

overlay_rx_pkts

(Optional) Total received pkts

overlay_rx_bytes

(Optional) Total received bytes

overlay_rx_bitrate

(Optional) Receive bit rate

overlay_rx_pktrate

(Optional) Receive pkt rate

overlay_tx_ucastpkts

(Optional) Trasnmitted ucast pkts

overlay_tx_ucastbytes

(Optional) Trasnmitted ucast bytes

overlay_tx_mcastpkts

(Optional) Trasnmitted mcast pkts

overlay_tx_mcastbytes

(Optional) Trasnmitted mcast bytes

overlay_tx_bcastpkts

(Optional) Trasnmitted bcast pkts

overlay_tx_bcastbytes

(Optional) Trasnmitted bcast bytes

overlay_tx_pkts

(Optional) Total transmitted pkts

overlay_tx_bytes

(Optional) Total transmitted bytes

overlay_tx_bitrate

(Optional) Transmit bit rate

overlay_tx_pktrate

(Optional) Transmit pkt rate

Command Mode

- /exec

show interface counters

show interface <ifrange> counters [ __readonly__ { TABLE_nve_counters <interface> [ <ucast_inbytes> ] [ <ucast_inpkts> ] [ <ucast_outbytes> ] [ <ucast_outpkts> ] [ <mcast_inbytes> ] [ <mcast_inpkts> ] [ <mcast_outbytes> ] [ <mcast_outpkts> ] } ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number

counters

Show interface counters

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_nve_counters

(Optional) show interface

ucast_inbytes

(Optional) ucast bytes input

ucast_inpkts

(Optional) ucast packets input

ucast_outbytes

(Optional) ucast bytes output

ucast_outpkts

(Optional) ucast packets output

mcast_inbytes

(Optional) mcast bytes input

mcast_inpkts

(Optional) mcast packets input

mcast_outbytes

(Optional) mcast bytes output

mcast_outpkts

(Optional) mcast packets output

Command Mode

- /exec

show interface counters brief

show interface <ifeth_ctr_brf> counters brief [ <counter_val> ] [ __readonly__ TABLE_interface <interface> <eth_load_intv1> <eth_inrate1> <eth_inframes1> <eth_outrate1> <eth_outframes1> <eth_load_intv2> <eth_inrate2> <eth_inframes2> <eth_outrate2> <eth_outframes2> <eth_load_intv3> <eth_inrate3> <eth_inframes3> <eth_outrate3> <eth_outframes3> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_ctr_brf

Enter interface type and number in module/slot format

counters

Show interface counters

brief

Show interface counters in brief

counter_val

(Optional) Specify a single load interval id to show the rates

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

eth_load_intv1

(Optional) interval 1 timer value in sec

eth_inrate1

(Optional) interval 1 input rate in mbps

eth_inframes1

(Optional) interval 1 input rate in frames (pkts)

eth_outrate1

(Optional) interval 1 output rate in mbps

eth_outframes1

(Optional) interval 1 output rate in output frames (pkts)

eth_load_intv2

(Optional) interval 2 timer value in sec

eth_inrate2

(Optional) interval 2 input rate in mbps

eth_inframes2

(Optional) interval 2 input rate in frames (pkts)

eth_outrate2

(Optional) interval 2 output rate in mbps

eth_outframes2

(Optional) interval 2 output rate in output frames (pkts)

eth_load_intv3

(Optional) interval 3 timer value in sec

eth_inrate3

(Optional) interval 3 input rate in mbps

eth_inframes3

(Optional) interval 3 input rate in frames (pkts)

eth_outrate3

(Optional) interval 3 output rate in mbps

eth_outframes3

(Optional) interval 3 output rate in output frames (pkts)

Command Mode

- /exec

show interface counters brief

show interface counters brief [ <counter_val> ] [ __readonly__ TABLE_interface <interface> <eth_inrate1> <eth_inframes1> <eth_outrate1> <eth_outframes1> <eth_load_intv1> <eth_inrate2> <eth_inframes2> <eth_outrate2> <eth_outframes2> <eth_load_intv2> <eth_inrate3> <eth_inframes3> <eth_outrate3> <eth_outframes3> <eth_load_intv3> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

brief

Show interface counters in brief

counter_val

(Optional) Specify a single load interval id to show the rates

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

eth_load_intv1

(Optional) interval 1 timer value in sec

eth_inrate1

(Optional) interval 1 input rate in mbps

eth_inframes1

(Optional) interval 1 input rate in frames (pkts)

eth_outrate1

(Optional) interval 1 output rate in mbps

eth_outframes1

(Optional) interval 1 output rate in output frames (pkts)

eth_load_intv2

(Optional) interval 2 timer value in sec

eth_inrate2

(Optional) interval 2 input rate in mbps

eth_inframes2

(Optional) interval 2 input rate in frames (pkts)

eth_outrate2

(Optional) interval 2 output rate in mbps

eth_outframes2

(Optional) interval 2 output rate in output frames (pkts)

eth_load_intv3

(Optional) interval 3 timer value in sec

eth_inrate3

(Optional) interval 3 input rate in mbps

eth_inframes3

(Optional) interval 3 input rate in frames (pkts)

eth_outrate3

(Optional) interval 3 output rate in mbps

eth_outframes3

(Optional) interval 3 output rate in output frames (pkts)

Command Mode

- /exec

show interface counters detailed

show interface counters detailed [ snmp ] [ __readonly__ TABLE_interface <interface> [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_in_avg_bytes> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_out_avg_bytes> ] [ <mgmt_in_pkts> ] [ <mgmt_in_bytes> ] [ <mgmt_in_mcast> ] [ <mgmt_in_compressed> ] [ <mgmt_in_errors> ] [ <mgmt_in_frame> ] [ <mgmt_in_overrun> ] [ <mgmt_in_fifo> ] [ <mgmt_out_pkts> ] [ <mgmt_out_bytes> ] [ <mgmt_out_underruns> ] [ <mgmt_out_errors> ] [ <mgmt_out_collisions> ] [ <mgmt_out_fifo> ] [ <mgmt_out_carrier> ] [ <mgmt_align_err> ] [ <mgmt_fcs_err> ] [ <mgmt_xmit_err> ] [ <mgmt_rcv_err> ] [ <mgmt_undersize> ] [ <mgmt_outdisc> ] [ <mgmt_single_col> ] [ <mgmt_multi_col> ] [ <mgmt_late_col> ] [ <mgmt_excess_col> ] [ <mgmt_carri_sen> ] [ <mgmt_runts> ] [ <mgmt_giants> ] [ <mgmt_sqetest_err> ] [ <mgmt_deferred_tx> ] [ <mgmt_inmactx_err> ] [ <mgmt_inmacrx_err> ] [ <mgmt_symbol_err> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] [ <eth_load_interval1> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_load_interval2> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_load_interval3> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_ingiants> ] [ <eth_inbytes> ] [ <eth_storm_supp> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outpkts> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outgiants> ] [ <eth_outbytes> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_nobuf> ] [ <eth_runts> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_coll> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_watchdog> ] [ <eth_dribble> ] [ <eth_inerr> ] [ <eth_outerr> ] [ <eth_deferred> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_inpause> ] [ <eth_outpause> ] [ <eth_resets> ] [ <eth_sqetest> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_throtles> ] [ <eth_frame> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] [ <svi_time_last_cleared> ] [ <svi_tx_load> ] [ <svi_rx_load> ] [ <svi_reliability> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

detailed

Show only non-zero counters

snmp

(Optional) Show SNMP MIB values

__readonly__

(Optional) Read Only

TABLE_interface

(Optional) show interface

interface

(Optional) Interface index

vdc_lvl_in_pkts

(Optional) VDC level input packets

vdc_lvl_in_bytes

(Optional) VDC level input bytes

vdc_lvl_in_ucast

(Optional) VDC level input unicast packets

vdc_lvl_in_mcast

(Optional) VDC level input multicast packets

vdc_lvl_in_bcast

(Optional) VDC level input broadcast packets

vdc_lvl_in_bps

(Optional) VDC level input bytes per second

vdc_lvl_in_pps

(Optional) VDC level input packets per second

vdc_lvl_in_avg_pkts

(Optional) VDC level average input packets

vdc_lvl_in_avg_bytes

(Optional) VDC level average input bytes

vdc_lvl_out_pkts

(Optional) VDC level output packets

vdc_lvl_out_bytes

(Optional) VDC level output bytes

vdc_lvl_out_ucast

(Optional) VDC level output unicast packets

vdc_lvl_out_mcast

(Optional) VDC level output multicast packets

vdc_lvl_out_bcast

(Optional) VDC level output broadcast packets

vdc_lvl_out_bps

(Optional) VDC level output bytes per second

vdc_lvl_out_pps

(Optional) VDC level output packets per second

vdc_lvl_out_avg_pkts

(Optional) VDC level average output packets

vdc_lvl_out_avg_bytes

(Optional) VDC level average output bytes

mgmt_in_pkts

(Optional) Input packets

mgmt_in_bytes

(Optional) Input bytes

mgmt_in_mcast

(Optional) Input multicast frames

mgmt_in_compressed

(Optional) Input compressed

mgmt_in_errors

(Optional) Input errors

mgmt_in_frame

(Optional) Input frame errors

mgmt_in_overrun

(Optional) Input overrun

mgmt_in_fifo

(Optional) Input fifo

mgmt_out_pkts

(Optional) Output packets

mgmt_out_bytes

(Optional) Output bytes

mgmt_out_underruns

(Optional) Output overruns

mgmt_out_errors

(Optional) Output errors

mgmt_out_collisions

(Optional) Output collisions

mgmt_out_fifo

(Optional) Output fifo

mgmt_out_carrier

(Optional) Output carrier errors

mgmt_align_err

(Optional) Align error

mgmt_fcs_err

(Optional) FCS error

mgmt_xmit_err

(Optional) Transmit error

mgmt_rcv_err

(Optional) Receive error

mgmt_undersize

(Optional) Undersize

mgmt_outdisc

(Optional) Out discard

mgmt_single_col

(Optional) Single collision

mgmt_multi_col

(Optional) Multiple collision

mgmt_late_col

(Optional) Late collision

mgmt_excess_col

(Optional) Excess collision

mgmt_carri_sen

(Optional) Carrier sense

mgmt_runts

(Optional) Runts

mgmt_giants

(Optional) Giants

mgmt_sqetest_err

(Optional) SQETest error

mgmt_deferred_tx

(Optional) Deferred tx

mgmt_inmactx_err

(Optional) In MAC tx

mgmt_inmacrx_err

(Optional) In MAC rx

mgmt_symbol_err

(Optional) Symbol error

loop_in_pkts

(Optional) Input packets

loop_in_bytes

(Optional) Input bytes

loop_in_mcast

(Optional) Input multicast

loop_in_compressed

(Optional) Input compressed

loop_in_errors

(Optional) Input errors

loop_in_frame

(Optional) Input frame errors

loop_in_overrun

(Optional) Input overrun

loop_in_fifo

(Optional) Input fifo

loop_out_pkts

(Optional) Output packets

loop_out_bytes

(Optional) Output bytes

loop_out_underruns

(Optional) Output underruns

loop_out_errors

(Optional) Output errors

loop_out_collisions

(Optional) Output collisions

loop_out_fifo

(Optional) Output fifo

loop_out_carriers

(Optional) Output carrier errors

eth_load_interval1

(Optional) interval 1 timer value in sec

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_load_interval2

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_load_interval3

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_inpkts

(Optional) Packets input

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_ingiants

(Optional) giants

eth_inbytes

(Optional) Bytes input

eth_storm_supp

(Optional) storm suppression

eth_inb64

(Optional) input pkts between 0 and 64 bytes

eth_inb65_127

(Optional) input pkts between 65 and 127 bytes

eth_inb128_255

(Optional) input pkts between 128 and 255 bytes

eth_inb256_511

(Optional) input pkts between 256 and 511 bytes

eth_inb512_1023

(Optional) input pkts between 512 and 1023 bytes

eth_inb1024_1518

(Optional) input pkts between 1024 and 1518 bytes

eth_inb1519_1548

(Optional) input pkts between 1519 and 1548 bytes

eth_intrunk

(Optional) input trunk pkts

eth_outpkts

(Optional) packets output

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_outgiants

(Optional) giants

eth_outbytes

(Optional) bytes output

eth_outb64

(Optional) output pkts between 0 and 64 bytes

eth_outb65_127

(Optional) output pkts between 65 and 127 bytes

eth_outb128_255

(Optional) output pkts between 128 and 255 bytes

eth_outb256_511

(Optional) output pkts between 256 and 511 bytes

eth_outb512_1023

(Optional) output pkts between 512 and 1023 bytes

eth_outb1024_1518

(Optional) output pkts between 1024 and 1518 bytes

eth_outb1519_1548

(Optional) output pkts between 1519 and 1548 bytes

eth_outtrunk

(Optional) output trunk pkts

eth_nobuf

(Optional) No buffer received

eth_runts

(Optional) runts

eth_crc

(Optional) CRC

eth_ecc

(Optional) ECC

eth_overrun

(Optional) overrun

eth_underrun

(Optional) underruns

eth_ignored

(Optional) ignored

eth_bad_eth

(Optional) bad ether type drop

eth_bad_proto

(Optional) bad protocol drops

eth_in_ifdown_drops

(Optional) Input if-down drops

eth_coll

(Optional) collisions

eth_latecoll

(Optional) late collision

eth_lostcarrier

(Optional) lost carrier

eth_nocarrier

(Optional) no carrier

eth_babbles

(Optional) babbles

eth_watchdog

(Optional) watchdog

eth_dribble

(Optional) input packets with dribble condition

eth_inerr

(Optional) input errors

eth_outerr

(Optional) output errors

eth_deferred

(Optional) deferred

eth_jabbers

(Optional) jabbers

eth_shortframe

(Optional) short frames

eth_single_coll

(Optional) single collisions

eth_multi_coll

(Optional) multi collisions

eth_excess_coll

(Optional) excessive collisions

eth_indiscard

(Optional) discards

eth_bad_encap

(Optional) bad encapsulation

eth_outcrc

(Optional) Output CRC

eth_symbol

(Optional) symbol errors

eth_out_drops

(Optional) output drops

eth_bpdu_outlost

(Optional) BPDU output lost

eth_cos0_outlost

(Optional) output pkts

eth_cos1_outlost

(Optional) output pkts

eth_cos2_outlost

(Optional) output pkts

eth_cos3_outlost

(Optional) output pkts

eth_cos4_outlost

(Optional) output pkts

eth_cos5_outlost

(Optional) output pkts

eth_cos6_outlost

(Optional) output pkts

eth_cos7_outlost

(Optional) output pkts

eth_inpause

(Optional) pause input

eth_outpause

(Optional) PAUSE output

eth_resets

(Optional) interface resets

eth_sqetest

(Optional) SQE test

eth_l2_ucastpkts

(Optional) L2 switched ucast pkts

eth_l2_ucastbytes

(Optional) L2 switched ucast bytes

eth_l2_mcastpkts

(Optional) L2 switched mcast pkts

eth_l2_mcastbytes

(Optional) L2 switched mcast bytes

eth_l2_bcastpkts

(Optional) L2 switched bcast pkts

eth_l2_bcastbytes

(Optional) L2 switched bcast bytes

eth_l3in_ucastpkts

(Optional) L3 in switched ucast pkts

eth_l3in_ucastbytes

(Optional) L3 in switched ucast bytes

eth_l3in_mcastpkts

(Optional) L3 in switched mcast pkts

eth_l3in_mcastbytes

(Optional) L3 in switched mcast bytes

eth_l3in_bcastpkts

(Optional) L3 in switched bcast pkts

eth_l3in_bcastbytes

(Optional) L3 in switched bcast bytes

eth_l3out_ucastpkts

(Optional) L3 out switched ucast pkts

eth_l3out_ucastbytes

(Optional) L3 out switched ucast bytes

eth_l3out_mcastpkts

(Optional) L3 out switched mcast pkts

eth_l3out_mcastbytes

(Optional) L3 out switched mcast bytes

eth_l3out_bcastpkts

(Optional) L3 out switched bcast pkts

eth_l3out_bcastbytes

(Optional) L3 out switched bcast bytes

eth_l3in_routed_pkts

(Optional) L3 in routed pkts

eth_l3in_routed_bytes

(Optional) L3 in routed bytes

eth_l3out_routed_pkts

(Optional) L3 out routed pkts

eth_l3out_routed_bytes

(Optional) L3 out routed bytes

eth_l3avg1_inbytes

(Optional) Load interval 1 L3 average in switched bytes

eth_l3avg1_inpkts

(Optional) Load interval 1 L3 average in switched pkts

eth_l3avg1_outbytes

(Optional) Load interval 1 L3 average out switched bytes

eth_l3avg1_outpkts

(Optional) Load interval 1 L3 average out switched pkts

eth_ipmcast

(Optional) IP multicast

eth_inhw_switched

(Optional) Input H/W Switched

eth_insw_switched

(Optional) Input S/W Switched

eth_throtles

(Optional) throttles

eth_frame

(Optional) frame

eth_outhw_switched

(Optional) Out H/W Switched

eth_outsw_switched

(Optional) Out S/W Switched

eth_buffail

(Optional) output buffer failures

eth_bufswapped

(Optional) output buffers swapped out

eth_arpdrops

(Optional) arp drops

eth_out_ifdown_drops

(Optional) Output if-down drops

eth_fcoe_in_pkts

(Optional) fcoe in pkts

eth_fcoe_in_octets

(Optional) fcoe in octets

eth_fcoe_out_pkts

(Optional) fcoe out pkts

eth_fcoe_out_octets

(Optional) fcoe out octets

eth_nfcoe_in_pkts

(Optional) nfcoe in pkts

eth_nfcoe_in_octets

(Optional) nfcoe in octets

eth_nfcoe_out_pkts

(Optional) nfcoe out pkts

eth_nfcoe_out_octets

(Optional) nfcoe out octets

svi_time_last_cleared

(Optional) Time last cleared

svi_tx_load

(Optional) Tx Load

svi_rx_load

(Optional) Rx Load

svi_reliability

(Optional) Reliability

Command Mode

- /exec

show interface counters detailed

show interface <ifmgmt_ctr_dtl> counters detailed [ __readonly__ TABLE_interface <interface> [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_in_avg_bytes> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_out_avg_bytes> ] [ <mgmt_in_pkts> ] [ <mgmt_in_bytes> ] [ <mgmt_in_mcast> ] [ <mgmt_in_compressed> ] [ <mgmt_in_errors> ] [ <mgmt_in_frame> ] [ <mgmt_in_overrun> ] [ <mgmt_in_fifo> ] [ <mgmt_out_pkts> ] [ <mgmt_out_bytes> ] [ <mgmt_out_underruns> ] [ <mgmt_out_errors> ] [ <mgmt_out_collisions> ] [ <mgmt_out_fifo> ] [ <mgmt_out_carrier> ] [ <mgmt_align_err> ] [ <mgmt_fcs_err> ] [ <mgmt_xmit_err> ] [ <mgmt_rcv_err> ] [ <mgmt_undersize> ] [ <mgmt_outdisc> ] [ <mgmt_single_col> ] [ <mgmt_multi_col> ] [ <mgmt_late_col> ] [ <mgmt_excess_col> ] [ <mgmt_carri_sen> ] [ <mgmt_runts> ] [ <mgmt_giants> ] [ <mgmt_sqetest_err> ] [ <mgmt_deferred_tx> ] [ <mgmt_inmactx_err> ] [ <mgmt_inmacrx_err> ] [ <mgmt_symbol_err> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifmgmt_ctr_dtl

Enter interface type and number in module/slot format

counters

Show interface counters

detailed

Show only non-zero counters

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

vdc_lvl_in_pkts

(Optional) VDC level input packets

vdc_lvl_in_bytes

(Optional) VDC level input bytes

vdc_lvl_in_ucast

(Optional) VDC level input unicast packets

vdc_lvl_in_mcast

(Optional) VDC level input multicast packets

vdc_lvl_in_bcast

(Optional) VDC level input broadcast packets

vdc_lvl_in_bps

(Optional) VDC level input bytes per second

vdc_lvl_in_pps

(Optional) VDC level input packets per second

vdc_lvl_in_avg_pkts

(Optional) VDC level average input packets

vdc_lvl_in_avg_bytes

(Optional) VDC level average input bytes

vdc_lvl_out_pkts

(Optional) VDC level output packets

vdc_lvl_out_bytes

(Optional) VDC level output bytes

vdc_lvl_out_ucast

(Optional) VDC level output unicast packets

vdc_lvl_out_mcast

(Optional) VDC level output multicast packets

vdc_lvl_out_bcast

(Optional) VDC level output broadcast packets

vdc_lvl_out_bps

(Optional) VDC level output bytes per second

vdc_lvl_out_pps

(Optional) VDC level output packets per second

vdc_lvl_out_avg_pkts

(Optional) VDC level average output packets

vdc_lvl_out_avg_bytes

(Optional) VDC level average output bytes

mgmt_in_pkts

(Optional) Input packets

mgmt_in_bytes

(Optional) Input bytes

mgmt_in_mcast

(Optional) Input multicast frames

mgmt_in_compressed

(Optional) Input compressed

mgmt_in_errors

(Optional) Input errors

mgmt_in_frame

(Optional) Input frame errors

mgmt_in_overrun

(Optional) Input overrun

mgmt_in_fifo

(Optional) Input fifo

mgmt_out_pkts

(Optional) Output packets

mgmt_out_bytes

(Optional) Output bytes

mgmt_out_underruns

(Optional) Output overruns

mgmt_out_errors

(Optional) Output errors

mgmt_out_collisions

(Optional) Output collisions

mgmt_out_fifo

(Optional) Output fifo

mgmt_out_carrier

(Optional) Output carrier errors

mgmt_align_err

(Optional) Align error

mgmt_fcs_err

(Optional) FCS error

mgmt_xmit_err

(Optional) Transmit error

mgmt_rcv_err

(Optional) Receive error

mgmt_undersize

(Optional) Undersize

mgmt_outdisc

(Optional) Out discard

mgmt_single_col

(Optional) Single collision

mgmt_multi_col

(Optional) Multiple collision

mgmt_late_col

(Optional) Late collision

mgmt_excess_col

(Optional) Excess collision

mgmt_carri_sen

(Optional) Carrier sense

mgmt_runts

(Optional) Runts

mgmt_giants

(Optional) Giants

mgmt_sqetest_err

(Optional) SQETest error

mgmt_deferred_tx

(Optional) Deferred tx

mgmt_inmactx_err

(Optional) In MAC tx

mgmt_inmacrx_err

(Optional) In MAC rx

mgmt_symbol_err

(Optional) Symbol error

Command Mode

- /exec

show interface counters detailed

show interface <ifloop_ctr_dtl> counters detailed [ __readonly__ TABLE_interface <interface> [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifloop_ctr_dtl

Enter interface type and number in module/slot format

counters

Show interface counters

detailed

Show only non-zero counters

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

loop_in_pkts

(Optional) Input packets

loop_in_bytes

(Optional) Input bytes

loop_in_mcast

(Optional) Input multicast

loop_in_compressed

(Optional) Input compressed

loop_in_errors

(Optional) Input errors

loop_in_frame

(Optional) Input frame errors

loop_in_overrun

(Optional) Input overrun

loop_in_fifo

(Optional) Input fifo

loop_out_pkts

(Optional) Output packets

loop_out_bytes

(Optional) Output bytes

loop_out_underruns

(Optional) Output underruns

loop_out_errors

(Optional) Output errors

loop_out_collisions

(Optional) Output collisions

loop_out_fifo

(Optional) Output fifo

loop_out_carriers

(Optional) Output carrier errors

Command Mode

- /exec

show interface counters detailed

show interface <ifeth_ctr_dtl> counters detailed [ snmp ] [ __readonly__ TABLE_interface <interface> [ <eth_load_interval1> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_load_interval2> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_load_interval3> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_ingiants> ] [ <eth_inbytes> ] [ <eth_storm_supp> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outpkts> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outgiants> ] [ <eth_outbytes> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_nobuf> ] [ <eth_runts> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_coll> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_watchdog> ] [ <eth_dribble> ] [ <eth_inerr> ] [ <eth_outerr> ] [ <eth_deferred> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_inpause> ] [ <eth_outpause> ] [ <eth_resets> ] [ <eth_sqetest> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_throtles> ] [ <eth_frame> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_ctr_dtl

Enter interface type and number in module/slot format

counters

Show interface counters

detailed

Show only non-zero counters

snmp

(Optional) Show SNMP MIB values

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

eth_load_interval1

(Optional) interval 1 timer value in sec

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_load_interval2

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_load_interval3

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_inpkts

(Optional) Packets input

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_ingiants

(Optional) giants

eth_inbytes

(Optional) Bytes input

eth_storm_supp

(Optional) storm suppression

eth_inb64

(Optional) input pkts between 0 and 64 bytes

eth_inb65_127

(Optional) input pkts between 65 and 127 bytes

eth_inb128_255

(Optional) input pkts between 128 and 255 bytes

eth_inb256_511

(Optional) input pkts between 256 and 511 bytes

eth_inb512_1023

(Optional) input pkts between 512 and 1023 bytes

eth_inb1024_1518

(Optional) input pkts between 1024 and 1518 bytes

eth_inb1519_1548

(Optional) input pkts between 1519 and 1548 bytes

eth_intrunk

(Optional) input trunk pkts

eth_outpkts

(Optional) packets output

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_outgiants

(Optional) giants

eth_outbytes

(Optional) bytes output

eth_outb64

(Optional) output pkts between 0 and 64 bytes

eth_outb65_127

(Optional) output pkts between 65 and 127 bytes

eth_outb128_255

(Optional) output pkts between 128 and 255 bytes

eth_outb256_511

(Optional) output pkts between 256 and 511 bytes

eth_outb512_1023

(Optional) output pkts between 512 and 1023 bytes

eth_outb1024_1518

(Optional) output pkts between 1024 and 1518 bytes

eth_outb1519_1548

(Optional) output pkts between 1519 and 1548 bytes

eth_outtrunk

(Optional) output trunk pkts

eth_nobuf

(Optional) No buffer received

eth_runts

(Optional) runts

eth_crc

(Optional) CRC

eth_ecc

(Optional) ECC

eth_overrun

(Optional) overrun

eth_underrun

(Optional) underruns

eth_ignored

(Optional) ignored

eth_bad_eth

(Optional) bad ether type drop

eth_bad_proto

(Optional) bad protocol drops

eth_in_ifdown_drops

(Optional) Input if-down drops

eth_coll

(Optional) collisions

eth_latecoll

(Optional) late collision

eth_lostcarrier

(Optional) lost carrier

eth_nocarrier

(Optional) no carrier

eth_babbles

(Optional) babbles

eth_watchdog

(Optional) watchdog

eth_dribble

(Optional) input packets with dribble condition

eth_inerr

(Optional) input errors

eth_outerr

(Optional) output errors

eth_deferred

(Optional) deferred

eth_jabbers

(Optional) jabbers

eth_shortframe

(Optional) short frames

eth_single_coll

(Optional) single collisions

eth_multi_coll

(Optional) multi collisions

eth_excess_coll

(Optional) excessive collisions

eth_indiscard

(Optional) discards

eth_bad_encap

(Optional) bad encapsulation

eth_outcrc

(Optional) Output CRC

eth_symbol

(Optional) symbol errors

eth_out_drops

(Optional) output drops

eth_bpdu_outlost

(Optional) BPDU output lost

eth_cos0_outlost

(Optional) output pkts

eth_cos1_outlost

(Optional) output pkts

eth_cos2_outlost

(Optional) output pkts

eth_cos3_outlost

(Optional) output pkts

eth_cos4_outlost

(Optional) output pkts

eth_cos5_outlost

(Optional) output pkts

eth_cos6_outlost

(Optional) output pkts

eth_cos7_outlost

(Optional) output pkts

eth_inpause

(Optional) pause input

eth_outpause

(Optional) PAUSE output

eth_resets

(Optional) interface resets

eth_sqetest

(Optional) SQE test

eth_l2_ucastpkts

(Optional) L2 switched ucast pkts

eth_l2_ucastbytes

(Optional) L2 switched ucast bytes

eth_l2_mcastpkts

(Optional) L2 switched mcast pkts

eth_l2_mcastbytes

(Optional) L2 switched mcast bytes

eth_l2_bcastpkts

(Optional) L2 switched bcast pkts

eth_l2_bcastbytes

(Optional) L2 switched bcast bytes

eth_l3in_ucastpkts

(Optional) L3 in switched ucast pkts

eth_l3in_ucastbytes

(Optional) L3 in switched ucast bytes

eth_l3in_mcastpkts

(Optional) L3 in switched mcast pkts

eth_l3in_mcastbytes

(Optional) L3 in switched mcast bytes

eth_l3in_bcastpkts

(Optional) L3 in switched bcast pkts

eth_l3in_bcastbytes

(Optional) L3 in switched bcast bytes

eth_l3out_ucastpkts

(Optional) L3 out switched ucast pkts

eth_l3out_ucastbytes

(Optional) L3 out switched ucast bytes

eth_l3out_mcastpkts

(Optional) L3 out switched mcast pkts

eth_l3out_mcastbytes

(Optional) L3 out switched mcast bytes

eth_l3out_bcastpkts

(Optional) L3 out switched bcast pkts

eth_l3out_bcastbytes

(Optional) L3 out switched bcast bytes

eth_l3in_routed_pkts

(Optional) L3 in routed pkts

eth_l3in_routed_bytes

(Optional) L3 in routed bytes

eth_l3out_routed_pkts

(Optional) L3 out routed pkts

eth_l3out_routed_bytes

(Optional) L3 out routed bytes

eth_l3avg1_inbytes

(Optional) Load interval 1 L3 average in switched bytes

eth_l3avg1_inpkts

(Optional) Load interval 1 L3 average in switched pkts

eth_l3avg1_outbytes

(Optional) Load interval 1 L3 average out switched bytes

eth_l3avg1_outpkts

(Optional) Load interval 1 L3 average out switched pkts

eth_ipmcast

(Optional) IP multicast

eth_inhw_switched

(Optional) Input H/W Switched

eth_insw_switched

(Optional) Input S/W Switched

eth_throtles

(Optional) throttles

eth_frame

(Optional) frame

eth_outhw_switched

(Optional) Out H/W Switched

eth_outsw_switched

(Optional) Out S/W Switched

eth_buffail

(Optional) output buffer failures

eth_bufswapped

(Optional) output buffers swapped out

eth_arpdrops

(Optional) arp drops

eth_out_ifdown_drops

(Optional) Output if-down drops

Command Mode

- /exec

show interface counters detailed all

show interface <ifid_ctr_dtl_all> counters detailed all [ snmp ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_ctr_dtl_all

Enter interface type and number in module/slot format

counters

Show interface counters

detailed

Show only non-zero counters

all

Show every interface counter

snmp

(Optional) Show SNMP MIB values

Command Mode

- /exec

show interface counters detailed all

show interface <ifmgmt_ctr_dtl_all> counters detailed all [ __readonly__ TABLE_interface <interface> [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_in_avg_bytes> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_out_avg_bytes> ] [ <mgmt_in_pkts> ] [ <mgmt_in_bytes> ] [ <mgmt_in_mcast> ] [ <mgmt_out_pkts> ] [ <mgmt_out_bytes> ] [ <mgmt_in_errors> ] [ <mgmt_out_errors> ] [ <mgmt_in_fifo> ] [ <mgmt_out_fifo> ] [ <mgmt_in_compressed> ] [ <mgmt_in_frame> ] [ <mgmt_in_overrun> ] [ <mgmt_out_underruns> ] [ <mgmt_out_collisions> ] [ <mgmt_out_carrier> ] [ <mgmt_align_err> ] [ <mgmt_fcs_err> ] [ <mgmt_xmit_err> ] [ <mgmt_rcv_err> ] [ <mgmt_undersize> ] [ <mgmt_outdisc> ] [ <mgmt_single_col> ] [ <mgmt_multi_col> ] [ <mgmt_late_col> ] [ <mgmt_excess_col> ] [ <mgmt_carri_sen> ] [ <mgmt_runts> ] [ <mgmt_giants> ] [ <mgmt_sqetest_err> ] [ <mgmt_deferred_tx> ] [ <mgmt_inmactx_err> ] [ <mgmt_inmacrx_err> ] [ <mgmt_symbol_err> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifmgmt_ctr_dtl_all

Enter interface type and number in module/slot format

counters

Show interface counters

detailed

Show only non-zero counters

all

Show every interface counter

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

vdc_lvl_in_pkts

(Optional) VDC level input packets

vdc_lvl_in_bytes

(Optional) VDC level input bytes

vdc_lvl_in_ucast

(Optional) VDC level input unicast packets

vdc_lvl_in_mcast

(Optional) VDC level input multicast packets

vdc_lvl_in_bcast

(Optional) VDC level input broadcast packets

vdc_lvl_in_bps

(Optional) VDC level input bytes per second

vdc_lvl_in_pps

(Optional) VDC level input packets per second

vdc_lvl_in_avg_pkts

(Optional) VDC level average input packets

vdc_lvl_in_avg_bytes

(Optional) VDC level average input bytes

vdc_lvl_out_pkts

(Optional) VDC level output packets

vdc_lvl_out_bytes

(Optional) VDC level output bytes

vdc_lvl_out_ucast

(Optional) VDC level output unicast packets

vdc_lvl_out_mcast

(Optional) VDC level output multicast packets

vdc_lvl_out_bcast

(Optional) VDC level output broadcast packets

vdc_lvl_out_bps

(Optional) VDC level output bytes per second

vdc_lvl_out_pps

(Optional) VDC level output packets per second

vdc_lvl_out_avg_pkts

(Optional) VDC level average output packets

vdc_lvl_out_avg_bytes

(Optional) VDC level average output bytes

mgmt_in_pkts

(Optional) Input packets

mgmt_in_bytes

(Optional) Input bytes

mgmt_in_mcast

(Optional) Input multicast frames

mgmt_out_pkts

(Optional) Output packets

mgmt_out_bytes

(Optional) Output bytes

mgmt_in_errors

(Optional) Input errors

mgmt_out_errors

(Optional) Output errors

mgmt_in_fifo

(Optional) Input fifo

mgmt_out_fifo

(Optional) Output fifo

mgmt_in_compressed

(Optional) Input compressed

mgmt_in_frame

(Optional) Input frame errors

mgmt_in_overrun

(Optional) Input overrun

mgmt_out_underruns

(Optional) Output overruns

mgmt_out_collisions

(Optional) Output collisions

mgmt_out_carrier

(Optional) Output carrier errors

mgmt_align_err

(Optional) Align error

mgmt_fcs_err

(Optional) FCS error

mgmt_xmit_err

(Optional) Transmit error

mgmt_rcv_err

(Optional) Receive error

mgmt_undersize

(Optional) Undersize

mgmt_outdisc

(Optional) Out discard

mgmt_single_col

(Optional) Single collision

mgmt_multi_col

(Optional) Multiple collision

mgmt_late_col

(Optional) Late collision

mgmt_excess_col

(Optional) Excess collision

mgmt_carri_sen

(Optional) Carrier sense

mgmt_runts

(Optional) Runts

mgmt_giants

(Optional) Giants

mgmt_sqetest_err

(Optional) SQETest error

mgmt_deferred_tx

(Optional) Deferred tx

mgmt_inmactx_err

(Optional) In MAC tx

mgmt_inmacrx_err

(Optional) In MAC rx

mgmt_symbol_err

(Optional) Symbol error

Command Mode

- /exec

show interface counters detailed all

show interface <ifloop_ctr_dtl_all> counters detailed all [ __readonly__ TABLE_interface <interface> [ <rx_total_pkts> ] [ <tx_total_pkts> ] [ <rx_mcast_pkts> ] [ <rx_octets> ] [ <tx_octets> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifloop_ctr_dtl_all

Enter interface type and number in module/slot format

counters

Show interface counters

detailed

Show only non-zero counters

all

Show every interface counter

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

rx_total_pkts

(Optional) total input packets

tx_total_pkts

(Optional) total output packets

rx_mcast_pkts

(Optional) input multicasts

rx_octets

(Optional) input bytes

tx_octets

(Optional) output bytes

loop_in_pkts

(Optional) Input packets

loop_in_bytes

(Optional) Input bytes

loop_in_mcast

(Optional) Input multicast

loop_in_compressed

(Optional) Input compressed

loop_in_errors

(Optional) Input errors

loop_in_frame

(Optional) Input frame errors

loop_in_overrun

(Optional) Input overrun

loop_in_fifo

(Optional) Input fifo

loop_out_pkts

(Optional) Output packets

loop_out_bytes

(Optional) Output bytes

loop_out_underruns

(Optional) Output underruns

loop_out_errors

(Optional) Output errors

loop_out_collisions

(Optional) Output collisions

loop_out_fifo

(Optional) Output fifo

loop_out_carriers

(Optional) Output carrier errors

Command Mode

- /exec

show interface counters detailed all

show interface <ifrange> counters detailed all [ snmp ] [ __readonly__ TABLE_interface <interface> [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] [ <svi_time_last_cleared> ] [ <svi_tx_load> ] [ <svi_rx_load> ] [ <svi_reliability> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter interface type and number in module/slot format

counters

Show interface counters

detailed

Show only non-zero counters

all

everything

snmp

(Optional) Show SNMP MIB values

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

svi_time_last_cleared

(Optional) Time last cleared

svi_tx_load

(Optional) Tx Load

svi_rx_load

(Optional) Rx Load

svi_reliability

(Optional) Reliability

Command Mode

- /exec

show interface counters detailed all

show interface <ifeth_ctr_dtl_all> counters detailed all [ snmp ] [ __readonly__ TABLE_interface <interface> [ <rx_total_pkts> ] [ <tx_total_pkts> ] [ <rx_ucast_pkts> ] [ <rx_mcast_pkts> ] [ <rx_bcast_pkts> ] [ <rx_octets> ] [ <tx_ucast_pkts> ] [ <tx_mcast_pkts> ] [ <tx_bcast_pkts> ] [ <tx_octets> ] [ <rxtx_pkts_64octets> ] [ <rxtx_pkts_65_127octets> ] [ <rxtx_pkts_128_255octets> ] [ <rxtx_pkts_256_511octets> ] [ <rxtx_pkts_512_1023octets> ] [ <rxtx_pkts_1024_1518octets> ] [ <rxtx_pkts_1519_1548octets> ] [ <rx_trunk_frames> ] [ <tx_trunk_frames> ] [ <rx_drop_events> ] [ <rxtx_giants> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_load_interval2> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_load_interval3> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_l3avg2_inbytes> ] [ <eth_l3avg2_inpkts> ] [ <eth_l3avg2_outbytes> ] [ <eth_l3avg2_outpkts> ] [ <eth_l3avg3_inbytes> ] [ <eth_l3avg3_inpkts> ] [ <eth_l3avg3_outbytes> ] [ <eth_l3avg3_outpkts> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_nobuf> ] [ <eth_inbcast> ] [ <eth_inmcast> ] [ <eth_inucast> ] [ <eth_ingiants> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_runts> ] [ <eth_storm_supp> ] [ <eth_throtles> ] [ <eth_inerr> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_outbcast> ] [ <eth_outmcast> ] [ <eth_outucast> ] [ <eth_outgiants> ] [ <eth_inpause> ] [ <eth_dribble> ] [ <eth_in_ifdown_drops> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_underrun> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_resets> ] [ <eth_babbles> ] [ <eth_latecoll> ] [ <eth_deferred> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_outpause> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_sqetest> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <eth_eee_atx_lpi_msec> ] [ <eth_eee_arcv_lpi_msec> ] [ <eth_eee_atx_lpi_transitions> ] [ <eth_eee_arcv_lpi_transitions> ] [ <eth_phy_ber_count> ] [ <eth_phy_errblks_count> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_ctr_dtl_all

Enter interface type and number in module/slot format

counters

Show interface counters

detailed

Show only non-zero counters

all

everything

snmp

(Optional) Show SNMP MIB values

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

rx_total_pkts

(Optional) total input packets

tx_total_pkts

(Optional) total output packets

rx_ucast_pkts

(Optional) input unicasts

rx_mcast_pkts

(Optional) input multicasts

rx_bcast_pkts

(Optional) input broadcasts

rx_octets

(Optional) input bytes

tx_ucast_pkts

(Optional) output unicasts

tx_mcast_pkts

(Optional) output multicasts

tx_bcast_pkts

(Optional) output broadcasts

tx_octets

(Optional) output bytes

rxtx_pkts_64octets

(Optional) all pkts between 0 and 64 bytes

rxtx_pkts_65_127octets

(Optional) all pkts between 65 and 127 bytes

rxtx_pkts_128_255octets

(Optional) all pkts between 128 and 255 bytes

rxtx_pkts_256_511octets

(Optional) all pkts between 256 and 511 bytes

rxtx_pkts_512_1023octets

(Optional) all pkts between 512 and 1023 bytes

rxtx_pkts_1024_1518octets

(Optional) all pkts between 1024 and 1518 bytes

rxtx_pkts_1519_1548octets

(Optional) all pkts between 1519 and 1548 bytes

rx_trunk_frames

(Optional) input trunk pkts

tx_trunk_frames

(Optional) output trunk pkts

rx_drop_events

(Optional) dropped pkts

rxtx_giants

(Optional) giants

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_load_interval2

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_load_interval3

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_l2_ucastpkts

(Optional) L2 switched ucast pkts

eth_l2_ucastbytes

(Optional) L2 switched ucast bytes

eth_l2_mcastpkts

(Optional) L2 switched mcast pkts

eth_l2_mcastbytes

(Optional) L2 switched mcast bytes

eth_l2_bcastpkts

(Optional) L2 switched bcast pkts

eth_l2_bcastbytes

(Optional) L2 switched bcast bytes

eth_l3in_ucastpkts

(Optional) IPv4 L3 in switched ucast pkts

eth_l3in_ucastbytes

(Optional) IPv4 L3 in switched ucast bytes

eth_l3in_mcastpkts

(Optional) IPv4 L3 in switched mcast pkts

eth_l3in_mcastbytes

(Optional) IPv4 L3 in switched mcast bytes

eth_l3in_bcastpkts

(Optional) L3 in switched bcast pkts

eth_l3in_bcastbytes

(Optional) L3 in switched bcast bytes

eth_l3out_ucastpkts

(Optional) IPv4 L3 out switched ucast pkts

eth_l3out_ucastbytes

(Optional) IPv4 L3 out switched ucast bytes

eth_l3out_mcastpkts

(Optional) IPv4 L3 out switched mcast pkts

eth_l3out_mcastbytes

(Optional) IPv4 L3 out switched mcast bytes

eth_l3out_bcastpkts

(Optional) L3 out switched bcast pkts

eth_l3out_bcastbytes

(Optional) L3 out switched bcast bytes

eth_l3in_routed_pkts

(Optional) L3 in routed pkts

eth_l3in_routed_bytes

(Optional) L3 in routed bytes

eth_l3out_routed_pkts

(Optional) L3 out routed pkts

eth_l3out_routed_bytes

(Optional) L3 out routed bytes

eth_l3avg1_inbytes

(Optional) Load interval 1 L3 average in switched bytes

eth_l3avg1_inpkts

(Optional) Load interval 1 L3 average in switched pkts

eth_l3avg1_outbytes

(Optional) Load interval 1 L3 average out switched bytes

eth_l3avg1_outpkts

(Optional) Load interval 1 L3 average out switched pkts

eth_l3avg2_inbytes

(Optional) Load interval 2 L3 average in switched bytes

eth_l3avg2_inpkts

(Optional) Load interval 2 L3 average in switched pkts

eth_l3avg2_outbytes

(Optional) Load interval 2 L3 average out switched bytes

eth_l3avg2_outpkts

(Optional) Load interval 2 L3 average out switched pkts

eth_l3avg3_inbytes

(Optional) Load interval 3 L3 average in switched bytes

eth_l3avg3_inpkts

(Optional) Load interval 3 L3 average in switched pkts

eth_l3avg3_outbytes

(Optional) Load interval 3 L3 average out switched bytes

eth_l3avg3_outpkts

(Optional) Load interval 3 L3 average out switched pkts

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_nobuf

(Optional) No buffer received

eth_inbcast

(Optional) Broadcasts

eth_inmcast

(Optional) Multicasts

eth_inucast

(Optional) Unicasts

eth_ingiants

(Optional) giants

eth_ipmcast

(Optional) IP multicast

eth_inhw_switched

(Optional) Input H/W Switched

eth_insw_switched

(Optional) Input S/W Switched

eth_runts

(Optional) runts

eth_storm_supp

(Optional) storm suppression

eth_throtles

(Optional) throttles

eth_inerr

(Optional) input errors

eth_crc

(Optional) CRC

eth_ecc

(Optional) ECC

eth_frame

(Optional) frame

eth_overrun

(Optional) overrun

eth_ignored

(Optional) ignored

eth_watchdog

(Optional) watchdog

eth_outbcast

(Optional) Broadcasts

eth_outmcast

(Optional) Multicasts

eth_outucast

(Optional) Unicasts

eth_outgiants

(Optional) giants

eth_inpause

(Optional) pause input

eth_dribble

(Optional) input packets with dribble condition

eth_in_ifdown_drops

(Optional) Input if-down drops

eth_bad_eth

(Optional) bad ether type drop

eth_bad_proto

(Optional) bad protocol drops

eth_outpkts

(Optional) packets output

eth_outbytes

(Optional) bytes output

eth_underrun

(Optional) underruns

eth_outhw_switched

(Optional) Out H/W Switched

eth_outsw_switched

(Optional) Out S/W Switched

eth_outerr

(Optional) output errors

eth_coll

(Optional) collisions

eth_resets

(Optional) interface resets

eth_babbles

(Optional) babbles

eth_latecoll

(Optional) late collision

eth_deferred

(Optional) deferred

eth_lostcarrier

(Optional) lost carrier

eth_nocarrier

(Optional) no carrier

eth_outpause

(Optional) PAUSE output

eth_buffail

(Optional) output buffer failures

eth_bufswapped

(Optional) output buffers swapped out

eth_arpdrops

(Optional) arp drops

eth_out_ifdown_drops

(Optional) Output if-down drops

eth_single_coll

(Optional) single collisions

eth_multi_coll

(Optional) multi collisions

eth_excess_coll

(Optional) excessive collisions

eth_jabbers

(Optional) jabbers

eth_shortframe

(Optional) short frames

eth_indiscard

(Optional) discards

eth_bad_encap

(Optional) bad encapsulation

eth_outcrc

(Optional) Output CRC

eth_symbol

(Optional) symbol errors

eth_out_drops

(Optional) output drops

eth_sqetest

(Optional) SQE test

eth_inb64

(Optional) input pkts between 0 and 64 bytes

eth_inb65_127

(Optional) input pkts between 65 and 127 bytes

eth_inb128_255

(Optional) input pkts between 128 and 255 bytes

eth_inb256_511

(Optional) input pkts between 256 and 511 bytes

eth_inb512_1023

(Optional) input pkts between 512 and 1023 bytes

eth_inb1024_1518

(Optional) input pkts between 1024 and 1518 bytes

eth_inb1519_1548

(Optional) input pkts between 1519 and 1548 bytes

eth_intrunk

(Optional) input trunk pkts

eth_outb64

(Optional) output pkts between 0 and 64 bytes

eth_outb65_127

(Optional) output pkts between 65 and 127 bytes

eth_outb128_255

(Optional) output pkts between 128 and 255 bytes

eth_outb256_511

(Optional) output pkts between 256 and 511 bytes

eth_outb512_1023

(Optional) output pkts between 512 and 1023 bytes

eth_outb1024_1518

(Optional) output pkts between 1024 and 1518 bytes

eth_outb1519_1548

(Optional) output pkts between 1519 and 1548 bytes

eth_outtrunk

(Optional) output trunk pkts

eth_bpdu_outlost

(Optional) BPDU output lost

eth_cos0_outlost

(Optional) output pkts

eth_cos1_outlost

(Optional) output pkts

eth_cos2_outlost

(Optional) output pkts

eth_cos3_outlost

(Optional) output pkts

eth_cos4_outlost

(Optional) output pkts

eth_cos5_outlost

(Optional) output pkts

eth_cos6_outlost

(Optional) output pkts

eth_cos7_outlost

(Optional) output pkts

eth_fcoe_in_pkts

(Optional) fcoe in pkts

eth_fcoe_in_octets

(Optional) fcoe in octets

eth_fcoe_out_pkts

(Optional) fcoe out pkts

eth_fcoe_out_octets

(Optional) fcoe out octets

eth_nfcoe_in_pkts

(Optional) nfcoe in pkts

eth_nfcoe_in_octets

(Optional) nfcoe in octets

eth_nfcoe_out_pkts

(Optional) nfcoe out pkts

eth_nfcoe_out_octets

(Optional) nfcoe out octets

eth_eee_atx_lpi_msec

(Optional) Tx Lpi usec

eth_eee_arcv_lpi_msec

(Optional) Rx Lpi usec

eth_eee_atx_lpi_transitions

(Optional) Tx Lpi requests

eth_eee_arcv_lpi_transitions

(Optional) Rx Lpi indications

eth_phy_ber_count

(Optional) Bit error rate counter

eth_phy_errblks_count

(Optional) Errored blocks counter

Command Mode

- /exec

show interface counters detailed cached

show interface <ifeth_ctr_dtl_all> counters detailed cached [ __readonly__ TABLE_interface <interface> [ <rx_total_pkts> ] [ <tx_total_pkts> ] [ <rx_ucast_pkts> ] [ <rx_mcast_pkts> ] [ <rx_bcast_pkts> ] [ <rx_octets> ] [ <tx_ucast_pkts> ] [ <tx_mcast_pkts> ] [ <tx_bcast_pkts> ] [ <tx_octets> ] [ <rxtx_pkts_64octets> ] [ <rxtx_pkts_65_127octets> ] [ <rxtx_pkts_128_255octets> ] [ <rxtx_pkts_256_511octets> ] [ <rxtx_pkts_512_1023octets> ] [ <rxtx_pkts_1024_1518octets> ] [ <rxtx_pkts_1519_1548octets> ] [ <rx_trunk_frames> ] [ <tx_trunk_frames> ] [ <rx_drop_events> ] [ <rxtx_giants> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_load_interval2> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_load_interval3> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_l3avg2_inbytes> ] [ <eth_l3avg2_inpkts> ] [ <eth_l3avg2_outbytes> ] [ <eth_l3avg2_outpkts> ] [ <eth_l3avg3_inbytes> ] [ <eth_l3avg3_inpkts> ] [ <eth_l3avg3_outbytes> ] [ <eth_l3avg3_outpkts> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_nobuf> ] [ <eth_inbcast> ] [ <eth_inmcast> ] [ <eth_inucast> ] [ <eth_ingiants> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_runts> ] [ <eth_storm_supp> ] [ <eth_throtles> ] [ <eth_inerr> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_outbcast> ] [ <eth_outmcast> ] [ <eth_outucast> ] [ <eth_outgiants> ] [ <eth_inpause> ] [ <eth_dribble> ] [ <eth_in_ifdown_drops> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_underrun> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_resets> ] [ <eth_babbles> ] [ <eth_latecoll> ] [ <eth_deferred> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_outpause> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_sqetest> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <eth_eee_atx_lpi_msec> ] [ <eth_eee_arcv_lpi_msec> ] [ <eth_eee_atx_lpi_transitions> ] [ <eth_eee_arcv_lpi_transitions> ] [ <eth_phy_ber_count> ] [ <eth_phy_errblks_count> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_ctr_dtl_all

Enter interface type and number in module/slot format

counters

Show interface counters

detailed

Show only non-zero counters

cached

everything cached

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

rx_total_pkts

(Optional) total input packets

tx_total_pkts

(Optional) total output packets

rx_ucast_pkts

(Optional) input unicasts

rx_mcast_pkts

(Optional) input multicasts

rx_bcast_pkts

(Optional) input broadcasts

rx_octets

(Optional) input bytes

tx_ucast_pkts

(Optional) output unicasts

tx_mcast_pkts

(Optional) output multicasts

tx_bcast_pkts

(Optional) output broadcasts

tx_octets

(Optional) output bytes

rxtx_pkts_64octets

(Optional) all pkts between 0 and 64 bytes

rxtx_pkts_65_127octets

(Optional) all pkts between 65 and 127 bytes

rxtx_pkts_128_255octets

(Optional) all pkts between 128 and 255 bytes

rxtx_pkts_256_511octets

(Optional) all pkts between 256 and 511 bytes

rxtx_pkts_512_1023octets

(Optional) all pkts between 512 and 1023 bytes

rxtx_pkts_1024_1518octets

(Optional) all pkts between 1024 and 1518 bytes

rxtx_pkts_1519_1548octets

(Optional) all pkts between 1519 and 1548 bytes

rx_trunk_frames

(Optional) input trunk pkts

tx_trunk_frames

(Optional) output trunk pkts

rx_drop_events

(Optional) dropped pkts

rxtx_giants

(Optional) giants

eth_load_interval1_rx

(Optional) interval 1 timer value in sec

eth_inrate1_bits

(Optional) interval 1 input rate bits/sec

eth_inrate1_pkts

(Optional) interval 1 input rate pkts/sec

eth_load_interval1_tx

(Optional) interval 1 timer value in sec

eth_outrate1_bits

(Optional) interval 1 output rate bits/sec

eth_outrate1_pkts

(Optional) interval 1 output rate pkts/sec

eth_load_interval2

(Optional) interval 2 timer value in sec

eth_inrate2_bits

(Optional) interval 2 input rate bits/sec

eth_inrate2_pkts

(Optional) interval 2 input rate pkts/sec

eth_outrate2_bits

(Optional) interval 2 output rate bits/sec

eth_outrate2_pkts

(Optional) interval 2 output rate pkts/sec

eth_load_interval3

(Optional) interval 3 timer value in sec

eth_inrate3_bits

(Optional) interval 3 input rate bits/sec

eth_inrate3_pkts

(Optional) interval 3 input rate pkts/sec

eth_outrate3_bits

(Optional) interval 3 output rate bits/sec

eth_outrate3_pkts

(Optional) interval 3 output rate pkts/sec

eth_l2_ucastpkts

(Optional) L2 switched ucast pkts

eth_l2_ucastbytes

(Optional) L2 switched ucast bytes

eth_l2_mcastpkts

(Optional) L2 switched mcast pkts

eth_l2_mcastbytes

(Optional) L2 switched mcast bytes

eth_l2_bcastpkts

(Optional) L2 switched bcast pkts

eth_l2_bcastbytes

(Optional) L2 switched bcast bytes

eth_l3in_ucastpkts

(Optional) IPv4 L3 in switched ucast pkts

eth_l3in_ucastbytes

(Optional) IPv4 L3 in switched ucast bytes

eth_l3in_mcastpkts

(Optional) IPv4 L3 in switched mcast pkts

eth_l3in_mcastbytes

(Optional) IPv4 L3 in switched mcast bytes

eth_l3in_bcastpkts

(Optional) L3 in switched bcast pkts

eth_l3in_bcastbytes

(Optional) L3 in switched bcast bytes

eth_l3out_ucastpkts

(Optional) IPv4 L3 out switched ucast pkts

eth_l3out_ucastbytes

(Optional) IPv4 L3 out switched ucast bytes

eth_l3out_mcastpkts

(Optional) IPv4 L3 out switched mcast pkts

eth_l3out_mcastbytes

(Optional) IPv4 L3 out switched mcast bytes

eth_l3out_bcastpkts

(Optional) L3 out switched bcast pkts

eth_l3out_bcastbytes

(Optional) L3 out switched bcast bytes

eth_l3in_routed_pkts

(Optional) L3 in routed pkts

eth_l3in_routed_bytes

(Optional) L3 in routed bytes

eth_l3out_routed_pkts

(Optional) L3 out routed pkts

eth_l3out_routed_bytes

(Optional) L3 out routed bytes

eth_l3avg1_inbytes

(Optional) Load interval 1 L3 average in switched bytes

eth_l3avg1_inpkts

(Optional) Load interval 1 L3 average in switched pkts

eth_l3avg1_outbytes

(Optional) Load interval 1 L3 average out switched bytes

eth_l3avg1_outpkts

(Optional) Load interval 1 L3 average out switched pkts

eth_l3avg2_inbytes

(Optional) Load interval 2 L3 average in switched bytes

eth_l3avg2_inpkts

(Optional) Load interval 2 L3 average in switched pkts

eth_l3avg2_outbytes

(Optional) Load interval 2 L3 average out switched bytes

eth_l3avg2_outpkts

(Optional) Load interval 2 L3 average out switched pkts

eth_l3avg3_inbytes

(Optional) Load interval 3 L3 average in switched bytes

eth_l3avg3_inpkts

(Optional) Load interval 3 L3 average in switched pkts

eth_l3avg3_outbytes

(Optional) Load interval 3 L3 average out switched bytes

eth_l3avg3_outpkts

(Optional) Load interval 3 L3 average out switched pkts

eth_inpkts

(Optional) Packets input

eth_inbytes

(Optional) Bytes input

eth_nobuf

(Optional) No buffer received

eth_inbcast

(Optional) Broadcasts

eth_inmcast

(Optional) Multicasts

eth_inucast

(Optional) Unicasts

eth_ingiants

(Optional) giants

eth_ipmcast

(Optional) IP multicast

eth_inhw_switched

(Optional) Input H/W Switched

eth_insw_switched

(Optional) Input S/W Switched

eth_runts

(Optional) runts

eth_storm_supp

(Optional) storm suppression

eth_throtles

(Optional) throttles

eth_inerr

(Optional) input errors

eth_crc

(Optional) CRC

eth_ecc

(Optional) ECC

eth_frame

(Optional) frame

eth_overrun

(Optional) overrun

eth_ignored

(Optional) ignored

eth_watchdog

(Optional) watchdog

eth_outbcast

(Optional) Broadcasts

eth_outmcast

(Optional) Multicasts

eth_outucast

(Optional) Unicasts

eth_outgiants

(Optional) giants

eth_inpause

(Optional) pause input

eth_dribble

(Optional) input packets with dribble condition

eth_in_ifdown_drops

(Optional) Input if-down drops

eth_bad_eth

(Optional) bad ether type drop

eth_bad_proto

(Optional) bad protocol drops

eth_outpkts

(Optional) packets output

eth_outbytes

(Optional) bytes output

eth_underrun

(Optional) underruns

eth_outhw_switched

(Optional) Out H/W Switched

eth_outsw_switched

(Optional) Out S/W Switched

eth_outerr

(Optional) output errors

eth_coll

(Optional) collisions

eth_resets

(Optional) interface resets

eth_babbles

(Optional) babbles

eth_latecoll

(Optional) late collision

eth_deferred

(Optional) deferred

eth_lostcarrier

(Optional) lost carrier

eth_nocarrier

(Optional) no carrier

eth_outpause

(Optional) PAUSE output

eth_buffail

(Optional) output buffer failures

eth_bufswapped

(Optional) output buffers swapped out

eth_arpdrops

(Optional) arp drops

eth_out_ifdown_drops

(Optional) Output if-down drops

eth_single_coll

(Optional) single collisions

eth_multi_coll

(Optional) multi collisions

eth_excess_coll

(Optional) excessive collisions

eth_jabbers

(Optional) jabbers

eth_shortframe

(Optional) short frames

eth_indiscard

(Optional) discards

eth_bad_encap

(Optional) bad encapsulation

eth_outcrc

(Optional) Output CRC

eth_symbol

(Optional) symbol errors

eth_out_drops

(Optional) output drops

eth_sqetest

(Optional) SQE test

eth_inb64

(Optional) input pkts between 0 and 64 bytes

eth_inb65_127

(Optional) input pkts between 65 and 127 bytes

eth_inb128_255

(Optional) input pkts between 128 and 255 bytes

eth_inb256_511

(Optional) input pkts between 256 and 511 bytes

eth_inb512_1023

(Optional) input pkts between 512 and 1023 bytes

eth_inb1024_1518

(Optional) input pkts between 1024 and 1518 bytes

eth_inb1519_1548

(Optional) input pkts between 1519 and 1548 bytes

eth_intrunk

(Optional) input trunk pkts

eth_outb64

(Optional) output pkts between 0 and 64 bytes

eth_outb65_127

(Optional) output pkts between 65 and 127 bytes

eth_outb128_255

(Optional) output pkts between 128 and 255 bytes

eth_outb256_511

(Optional) output pkts between 256 and 511 bytes

eth_outb512_1023

(Optional) output pkts between 512 and 1023 bytes

eth_outb1024_1518

(Optional) output pkts between 1024 and 1518 bytes

eth_outb1519_1548

(Optional) output pkts between 1519 and 1548 bytes

eth_outtrunk

(Optional) output trunk pkts

eth_bpdu_outlost

(Optional) BPDU output lost

eth_cos0_outlost

(Optional) output pkts

eth_cos1_outlost

(Optional) output pkts

eth_cos2_outlost

(Optional) output pkts

eth_cos3_outlost

(Optional) output pkts

eth_cos4_outlost

(Optional) output pkts

eth_cos5_outlost

(Optional) output pkts

eth_cos6_outlost

(Optional) output pkts

eth_cos7_outlost

(Optional) output pkts

eth_fcoe_in_pkts

(Optional) fcoe in pkts

eth_fcoe_in_octets

(Optional) fcoe in octets

eth_fcoe_out_pkts

(Optional) fcoe out pkts

eth_fcoe_out_octets

(Optional) fcoe out octets

eth_nfcoe_in_pkts

(Optional) nfcoe in pkts

eth_nfcoe_in_octets

(Optional) nfcoe in octets

eth_nfcoe_out_pkts

(Optional) nfcoe out pkts

eth_nfcoe_out_octets

(Optional) nfcoe out octets

eth_eee_atx_lpi_msec

(Optional) Tx Lpi usec

eth_eee_arcv_lpi_msec

(Optional) Rx Lpi usec

eth_eee_atx_lpi_transitions

(Optional) Tx Lpi requests

eth_eee_arcv_lpi_transitions

(Optional) Rx Lpi indications

eth_phy_ber_count

(Optional) Bit error rate counter

eth_phy_errblks_count

(Optional) Errored blocks counter

Command Mode

- /exec

show interface counters errors

show interface <ifeth_ctr_errs> counters errors [ snmp ] [ __readonly__ TABLE_interface <interface> [ <eth_align_err> ] [ <eth_fcs_err> ] [ <eth_xmit_err> ] [ <eth_rcv_err> ] [ <eth_undersize> ] [ <eth_outdisc> ] [ <eth_single_col> ] [ <eth_multi_col> ] [ <eth_late_col> ] [ <eth_excess_col> ] [ <eth_carri_sen> ] [ <eth_runts> ] [ <eth_giants> ] [ <eth_sqetest_err> ] [ <eth_deferred_tx> ] [ <eth_inmactx_err> ] [ <eth_inmacrx_err> ] [ <eth_symbol_err> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_ctr_errs

Enter interface type and number in module/slot format

counters

Show interface counters

errors

Show interface error counters

snmp

(Optional) Show SNMP MIB values

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

eth_align_err

(Optional) Align error

eth_fcs_err

(Optional) FCS error

eth_xmit_err

(Optional) Transmit error

eth_rcv_err

(Optional) Receive error

eth_undersize

(Optional) Undersize

eth_outdisc

(Optional) Out discard

eth_single_col

(Optional) Single collision

eth_multi_col

(Optional) Multiple collision

eth_late_col

(Optional) Late collision

eth_excess_col

(Optional) Excess collision

eth_carri_sen

(Optional) Carrier sense

eth_runts

(Optional) Runts

eth_giants

(Optional) Giants

eth_sqetest_err

(Optional) SQETest error

eth_deferred_tx

(Optional) Deferred tx

eth_inmactx_err

(Optional) In MAC tx

eth_inmacrx_err

(Optional) In MAC rx

eth_symbol_err

(Optional) Symbol error

Command Mode

- /exec

show interface counters errors

show interface counters errors [ module <module> ] [ non-zero ] [ __readonly__ TABLE_interface <interface> [ <eth_align_err> ] [ <eth_fcs_err> ] [ <eth_xmit_err> ] [ <eth_rcv_err> ] [ <eth_undersize> ] [ <eth_outdisc> ] [ <eth_single_col> ] [ <eth_multi_col> ] [ <eth_late_col> ] [ <eth_excess_col> ] [ <eth_carri_sen> ] [ <eth_runts> ] [ <eth_giants> ] [ <eth_sqetest_err> ] [ <eth_deferred_tx> ] [ <eth_inmacrx_err> ] [ <eth_inmactx_err> ] [ <eth_symbol_err> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

errors

Show interface error counters

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

non-zero

(Optional) Display only the non-zero error values

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

eth_align_err

(Optional) Align error

eth_fcs_err

(Optional) FCS error

eth_xmit_err

(Optional) Transmit error

eth_rcv_err

(Optional) Receive error

eth_undersize

(Optional) Undersize

eth_outdisc

(Optional) Out discard

eth_single_col

(Optional) Single collision

eth_multi_col

(Optional) Multiple collision

eth_late_col

(Optional) Late collision

eth_excess_col

(Optional) Excess collision

eth_carri_sen

(Optional) Carrier sense

eth_runts

(Optional) Runts

eth_giants

(Optional) Giants

eth_sqetest_err

(Optional) SQETest error

eth_deferred_tx

(Optional) Deferred tx

eth_inmacrx_err

(Optional) In MAC rx

eth_inmactx_err

(Optional) In MAC tx

eth_symbol_err

(Optional) Symbol error

Command Mode

- /exec

show interface counters errors

show interface <loop_ctr_errs> counters errors

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

loop_ctr_errs

Enter interface type and number in module/slot format

counters

Show interface counters

errors

Show interface error counters

Command Mode

- /exec

show interface counters snmp

show interface counters snmp [ module <module> ] [ __readonly__ { TABLE_rx_counters <interface> <eth_inpkts> [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface> <eth_outpkts> [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

snmp

Show SNMP MIB values

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_rx_counters

(Optional) show Rx counters

TABLE_tx_counters

(Optional) show Tx counters

eth_inpkts

(Optional) Packets input

eth_inucast

(Optional) Unicasts

eth_inmcast

(Optional) Multicasts

eth_inbcast

(Optional) Broadcasts

eth_outpkts

(Optional) Packets output

eth_outucast

(Optional) Unicasts

eth_outmcast

(Optional) Multicasts

eth_outbcast

(Optional) Broadcasts

eth_l3in_bytes

(Optional) L3 Rx bytes

eth_l3in_ucastpkts

(Optional) L3 Rx Unicast pkts

eth_l3in_mcastpkts

(Optional) L3 Rx Multicast pkts

eth_l3in_bcastpkts

(Optional) L3 Rx Broadcast pkts

eth_l3out_bytes

(Optional) L3 Tx bytes

eth_l3out_ucastpkts

(Optional) L3 Tx Unicast pkts

eth_l3out_mcastpkts

(Optional) L3 Tx Multicast pkts

eth_l3out_bcastpkts

(Optional) L3 Tx Broadcast pkts

Command Mode

- /exec

show interface counters storm-control

show interface <ifeth_ctr_stm_ctrl> counters storm-control [ __readonly__ TABLE_interface <interface> <eth_ucast_supp> <eth_mcast_supp> <eth_bcast_supp> <eth_total_supp> <supp_action> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_ctr_stm_ctrl

Enter interface type and number in module/slot format

counters

Show interface counters

storm-control

Show interface storm-control counters

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

eth_ucast_supp

(Optional) Unicast suppression percentage

eth_mcast_supp

(Optional) Multicast suppression percentage

eth_bcast_supp

(Optional) Broadcast suppression percentage

eth_total_supp

(Optional) Total discarded due to suppression

supp_action

(Optional) Action to be taken on suppression

Command Mode

- /exec

show interface counters storm-control

show interface counters storm-control [ module <module> ] [ __readonly__ TABLE_interface <interface> <eth_ucast_supp> <eth_mcast_supp> <eth_bcast_supp> <eth_total_supp> <supp_action> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

storm-control

Show interface storm-control counters

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

eth_ucast_supp

(Optional) Unicast suppression percentage

eth_mcast_supp

(Optional) Multicast suppression percentage

eth_bcast_supp

(Optional) Broadcast suppression percentage

eth_total_supp

(Optional) Total discarded due to suppression

supp_action

(Optional) Action to be taken on suppression

Command Mode

- /exec

show interface counters table

show interface counters table [ verbose ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

counters

Show interface counters

table

format counters in a table

verbose

(Optional) show errors counts after counters

Command Mode

- /exec

show interface counters trunk

show interface <ifeth_ctr_trnk> counters trunk [ __readonly__ TABLE_interface <interface> [ <eth_trunk_frames_tx> ] [ <eth_trunk_frames_rx> ] [ <eth_wrong_encap> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_ctr_trnk

Enter interface type and number in module/slot format

counters

Show interface counters

trunk

Show interface trunk counters

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

eth_trunk_frames_tx

(Optional) Trunk frame transmitted

eth_trunk_frames_rx

(Optional) Trunk frames received

eth_wrong_encap

(Optional) Wrong encapsulation

Command Mode

- /exec

show interface debounce

show interface debounce [ __readonly__ TABLE_interface <interface> <debounce> <debounce_val> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

debounce

Show interface debounce time information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

debounce

(Optional) Debounce time

debounce_val

(Optional) Value(ms)

Command Mode

- /exec

show interface debounce

show interface <ifeth_dbnc> debounce [ __readonly__ TABLE_interface <interface> <debounce> <debounce_val> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_dbnc

Enter interface type and number in module/slot format

debounce

Show interface debounce time information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

debounce

(Optional) Debounce time

debounce_val

(Optional) Value(ms)

Command Mode

- /exec

show interface description

show interface description [ __readonly__ TABLE_interface <interface> [ <state> ] [ <type> ] [ <speed> ] [ <protocol> ] [ <desc> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

description

Show interface description

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

type

(Optional) Type

speed

(Optional) Speed

protocol

(Optional) Protocol

desc

(Optional) Description

Command Mode

- /exec

show interface description

show interface <ifid_mgmt_loop> description [ __readonly__ TABLE_interface <interface> [ <state> ] [ <protocol> ] [ <desc> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_mgmt_loop

Enter interface type and number in module/slot format

description

Show interface description

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

protocol

(Optional) Protocol

desc

(Optional) Description

Command Mode

- /exec

show interface description

show interface <ifid_eth> description [ __readonly__ TABLE_interface <interface> [ <state> ] [ <type> ] [ <speed> ] [ <protocol> ] [ <desc> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_eth

Enter interface type and number in module/slot format

description

Show interface description

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

type

(Optional) Type

speed

(Optional) Speed

protocol

(Optional) Protocol

desc

(Optional) Description

Command Mode

- /exec

show interface description

show interface <iftun_desc> description [ __readonly__ TABLE_interface <interface> <state> <protocol> <desc> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

iftun_desc

Enter tunnel interface number

description

Show interface description

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

protocol

(Optional) Protocol

desc

(Optional) Description

Command Mode

- /exec

show interface description

show interface <ifrange> description [ __readonly__ TABLE_interface <interface> <state> <protocol> <desc> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter tunnel interface number

description

Show interface description

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

protocol

(Optional) Protocol

desc

(Optional) Description

Command Mode

- /exec

show interface description

show interface <ifrange> description [ __readonly__ TABLE_interface <interface> <state> <protocol> <desc> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter tunnel interface number

description

Show interface description

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

state

(Optional) Interface state

protocol

(Optional) Protocol

desc

(Optional) Description

Command Mode

- /exec

show interface description

show interface <ifid> description [ __readonly__ <start> <if_index> <LINE> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

description

Interface specific description

__readonly__

(Optional) Read Only

start

(Optional) Start

if_index

(Optional) Interface

LINE

(Optional) Description

Command Mode

- /exec

show interface fcoe

show interface <ifeth_fcoe> fcoe [ __readonly__ TABLE_interface <interface> [ <state> ] [ <vfc> ] [ <vfc_bound> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_fcoe

Enter interface type and number in module/slot format

fcoe

Show interface fcoe information

__readonly__

(Optional) Read Only

TABLE_interface

(Optional) show interface

interface

(Optional) Interface index

state

(Optional) State of interface

vfc

(Optional) VFC

vfc_bound

(Optional) Binding information

Command Mode

- /exec

show interface flowcontrol

show interface flowcontrol [ module <module> ] [ __readonly__ TABLE_interface <interface> <send_admin> <send_oper> <recv_admin> <recv_oper> <rxpause> <txpause> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

flowcontrol

Show interface flowcontrol information

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

send_admin

(Optional) Send flowcontrol admin

send_oper

(Optional) Send flowcontrol oper

recv_admin

(Optional) Receive flowcontrol admin

recv_oper

(Optional) Receive flowcontrol oper

rxpause

(Optional) RxPause

txpause

(Optional) TxPause

Command Mode

- /exec

show interface flowcontrol

show interface <ifeth_fl_ctrl> flowcontrol [ __readonly__ TABLE_interface <interface> <send_admin> <send_oper> <recv_admin> <recv_oper> <rxpause> <txpause> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_fl_ctrl

Enter interface type and number in module/slot format

flowcontrol

Show interface flowcontrol information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

send_admin

(Optional) Send flowcontrol admin

send_oper

(Optional) Send flowcontrol oper

recv_admin

(Optional) Receive flowcontrol admin

recv_oper

(Optional) Receive flowcontrol oper

rxpause

(Optional) RxPause

txpause

(Optional) TxPause

Command Mode

- /exec

show interface hardware-mappings

show interface hardware-mappings

Syntax Description

Syntax Description

show

Show running system information

interface

Interface

hardware-mappings

Show hardware port number and unit information for interfaces

Command Mode

- /exec

show interface mac-address

show interface mac-address [ __readonly__ TABLE_interface <interface> <address> <bia_address> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

mac-address

Show interface MAC address

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

address

(Optional) MAC Address

bia_address

(Optional) Burn-In MAC Address

Command Mode

- /exec

show interface mac-address

show interface <ifid_macaddr> mac-address [ __readonly__ TABLE_interface <interface> <address> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_macaddr

Enter interface type and number in module/slot format

mac-address

Show interface MAC address

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

address

(Optional) MAC Address

Command Mode

- /exec

show interface priority-flow-control

show interface [ <if_list> ] priority-flow-control [ detail ] [ module <module> ] [ __readonly__ [ TABLE_pfc_interface <if_name_str> <admin> <oper> <cos-list> <rx-stats> <tx-stats> <rx_ppp_cos_0> <tx_ppp_cos_0> <ppp_cos_1> <ppp_cos_2> <ppp_cos_3> <ppp_cos_4> <ppp_cos_5> <ppp_cos_6> <ppp_cos_7> ] ]

Syntax Description

Syntax Description

show

commands to display

interface

Interface for displaying pfc information

if_list

(Optional) List of interfaces

module

(Optional) Slot/module

module

(Optional) Slot/module number

priority-flow-control

Show interface PFC information

detail

(Optional) Show detailed per priority Tx/Rx PFC statistics

__readonly__

(Optional)

if_name_str

(Optional) interface name

TABLE_pfc_interface

(Optional) PFC information of an interface

admin

(Optional) PFC admin

oper

(Optional) PFC oper

cos-list

(Optional) List of class-of-service values

Command Mode

- /exec

show interface private-vlan mapping

show interface [ <if> ] private-vlan mapping [ __readonly__ [ <output-filtered> ] [ { TABLE_interf_mapp <interface-id> [ <secondary-vlan> + ] [ <pvlan-type> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

if

(Optional) Vlan Interface number

private-vlan

Show interface private vlan information

mapping

Show interface private vlan information

__readonly__

(Optional) Read Only

output-filtered

(Optional) the output is filtered for specified ifs

TABLE_interf_mapp

(Optional) Pvlan interface mapping table

interface-id

(Optional) Interface

secondary-vlan

(Optional) Secondary Vlan

pvlan-type

(Optional) PVLAN Type

Command Mode

- /exec

show interface snmp-ifindex

show interface snmp-ifindex [ __readonly__ TABLE_interface <interface> [ <ifindex-dec> ] <snmp-ifindex> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

snmp-ifindex

Show snmp ifindex list

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

snmp-ifindex

(Optional) If Index in Hex

ifindex-dec

(Optional) If Index in Decimal

Command Mode

- /exec

show interface status

show interface status [ down | inactive | module <module> | up | auto-column ] [ __readonly__ TABLE_interface <interface> [ <name> ] <state> <vlan> <duplex> <speed> [ <type> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

status

Show interface line status

down

(Optional) Show interface down state

inactive

(Optional) Show interface inactive state

auto-column

(Optional) Show interface status auto-column adjusted

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

up

(Optional) Show interface up state

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

state

(Optional) Interface state

vlan

(Optional) Vlan

duplex

(Optional) Duplex

speed

(Optional) Speed

type

(Optional) Type

Command Mode

- /exec

show interface status

show interface <ifid_status> status [ __readonly__ TABLE_interface <interface> [ <name> ] [ <state> ] [ <vlan> ] [ <duplex> ] [ <speed> ] [ <type> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_status

Enter interface type and number in module/slot format

status

Show interface line status

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

state

(Optional) Interface state

vlan

(Optional) Vlan

duplex

(Optional) Duplex

speed

(Optional) Speed

type

(Optional) Type

Command Mode

- /exec

show interface status

show interface <ifeth_status> status [ __readonly__ TABLE_interface <interface> [ <name> ] [ <state> ] [ <vlan> ] <duplex> <speed> [ <type> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_status

Enter interface type and number in module/slot format

status

Show interface line status

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

state

(Optional) Interface state

vlan

(Optional) Vlan

duplex

(Optional) Duplex

speed

(Optional) Speed

type

(Optional) Type

Command Mode

- /exec

show interface status

show interface <iftun_status> status [ err-disabled ] [ __readonly__ TABLE_interface <interface> <name> <state> <state_rsn> <state_rsn_desc> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

iftun_status

Enter tunnel interface number

status

Show interface line status

err-disabled

(Optional) Show interface error disabled state

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

Command Mode

- /exec

show interface status

show interface <ifrange> status [ err-disabled ] [ __readonly__ TABLE_interface <interface> <name> <state> <state_rsn> <state_rsn_desc> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter tunnel interface number

status

Show interface line status

err-disabled

(Optional) Show interface error disabled state

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

Command Mode

- /exec

show interface status

show interface <ifrange> status [ err-disabled ] [ __readonly__ TABLE_interface <interface> <name> <state> <state_rsn> <state_rsn_desc> <admin_state> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifrange

Enter tunnel interface number

status

Show interface line status

err-disabled

(Optional) Show interface error disabled state

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

admin_state

(Optional) admin state

Command Mode

- /exec

show interface status

show interface <ifid> status [ __readonly__ <start> <if_index> <admin-state> <line-proto> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

status

Interface status

__readonly__

(Optional) Read Only

start

(Optional) Start

if_index

(Optional) Interface

admin-state

(Optional)

line-proto

(Optional)

Command Mode

- /exec

show interface status err-disabled

show interface status err-disabled [ __readonly__ TABLE_interface <interface> [ <name> ] <state> [ <state_rsn> ] [ <state_rsn_desc> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

status

Show interface line status

err-disabled

Show interface error disabled state

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

Command Mode

- /exec

show interface status err-disabled

show interface <ifeth_errdis> status err-disabled [ __readonly__ TABLE_interface <interface> [ <name> ] <state> [ <state_rsn> ] [ <state_rsn_desc> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

status

Show interface line status

ifeth_errdis

Enter interface type and number in module/slot format

err-disabled

Show interface error disabled state

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

state

(Optional) Interface state

state_rsn

(Optional) Interface state reason

state_rsn_desc

(Optional) Interface state reason detailed

Command Mode

- /exec

show interface status err-vlans

show interface status err-vlans [ __readonly__ TABLE_interface <interface> [ <name> ] { TABLE_vlan <err_vlan> <err_vlan_status> <err_vlan_syserr> } ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

status

Show interface line status

err-vlans

Show errored vlans

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

TABLE_vlan

(Optional) show vlan

err_vlan

(Optional) Errored vlan

err_vlan_status

(Optional) Errored vlan status

err_vlan_syserr

(Optional) Errored vlan syserr name

Command Mode

- /exec

show interface status err-vlans

show interface <ifeth_errvlans> status err-vlans [ __readonly__ TABLE_interface <interface> [ <name> ] [ { TABLE_vlan [ <err_vlan> ] [ <err_vlan_status> ] [ <err_vlan_syserr> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_errvlans

Enter interface type and number in module/slot format

status

Show interface line status

err-vlans

Show errored vlans

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

name

(Optional) Name

TABLE_vlan

(Optional) show vlan

err_vlan

(Optional) Errored vlan

err_vlan_status

(Optional) Errored vlan status

err_vlan_syserr

(Optional) Errored vlan syserr name

Command Mode

- /exec

show interface switchport

show interface switchport [ __readonly__ TABLE_interface <interface> <switchport> [ <switchport_monitor> ] [ <switchport_isolated> ] [ <switchport_block_unicast> ] [ <switchport_block_multicast> ] [ <oper_mode> ] [ <access_vlan> ] [ <access_vlan_name> ] [ <native_vlan> ] [ <native_vlan_name> ] [ <trunk_vlans> ] [ <fabricpath_topologies> ] [ <pruning_vlans> ] [ <admin_pvlan_pri_assoc> ] [ <admin_pvlan_sec_assoc> ] [ <admin_pvlan_pri_mapping> ] [ <admin_pvlan_sec_mapping> ] [ <admin_pvlan_trunk_native> ] [ <admin_pvlan_trunk_encap> ] [ <admin_pvlan_trunk_normal> ] [ <admin_pvlan_trunk_private> ] [ <oper_pvlan> ] [ <autostate_mode> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

switchport

Show interface switchport information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

switchport

(Optional) Switchport enabled

switchport_monitor

(Optional) Switchport monitor enabled

switchport_isolated

(Optional) Switchport isolated enabled

switchport_block_unicast

(Optional) Switchport monitor enabled

switchport_block_multicast

(Optional) Switchport monitor enabled

oper_mode

(Optional) Operational mode

access_vlan

(Optional) Access mode VLAN

access_vlan_name

(Optional) Access mode VLAN name

native_vlan

(Optional) Trunking native mode VLAN

native_vlan_name

(Optional) Trunking native mode VLAN name

trunk_vlans

(Optional) Trunking VLANs Allowed

fabricpath_topologies

(Optional) FabricPath Topologies Allowed

pruning_vlans

(Optional) Pruning eligible VLANs

admin_pvlan_pri_assoc

(Optional) Administrative private-vlan primary host-association

admin_pvlan_sec_assoc

(Optional) Administrative private-vlan secondary host-association

admin_pvlan_pri_mapping

(Optional) Administrative private-vlan primary mapping

admin_pvlan_sec_mapping

(Optional) Administrative private-vlan secondary mapping

admin_pvlan_trunk_native

(Optional) Administrative private-vlan trunk native VLAN

admin_pvlan_trunk_encap

(Optional) Administrative private-vlan trunk encapsulation

admin_pvlan_trunk_normal

(Optional) Administrative private-vlan trunk normal VLANs

admin_pvlan_trunk_private

(Optional) Administrative private-vlan trunk private VLANs

oper_pvlan

(Optional) Operational private-vlan

autostate_mode

(Optional) SVI Autostate Exclude Info

Command Mode

- /exec

show interface switchport

show interface <ifeth_swtch> switchport [ __readonly__ TABLE_interface <interface> <switchport> [ <switchport_monitor> ] [ <switchport_isolated> ] [ <switchport_block_unicast> ] [ <switchport_block_multicast> ] [ <oper_mode> ] [ <access_vlan> ] [ <access_vlan_name> ] [ <native_vlan> ] [ <native_vlan_name> ] [ <trunk_vlans> ] [ <fabricpath_topologies> ] [ <pruning_vlans> ] [ <admin_pvlan_pri_assoc> ] [ <admin_pvlan_sec_assoc> ] [ <admin_pvlan_pri_mapping> ] [ <admin_pvlan_sec_mapping> ] [ <admin_pvlan_trunk_native> ] [ <admin_pvlan_trunk_encap> ] [ <admin_pvlan_trunk_normal> ] [ <admin_pvlan_trunk_private> ] [ <oper_pvlan> ] [ <autostate_mode> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_swtch

Enter interface type and number in module/slot format

switchport

Show interface switchport information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

switchport

(Optional) Switchport enabled

switchport_monitor

(Optional) Switchport monitor enabled

switchport_isolated

(Optional) Switchport isolated enabled

switchport_block_unicast

(Optional) Switchport monitor enabled

switchport_block_multicast

(Optional) Switchport monitor enabled

oper_mode

(Optional) Operational mode

access_vlan

(Optional) Access mode VLAN

access_vlan_name

(Optional) Access mode VLAN name

native_vlan

(Optional) Trunking native mode VLAN

native_vlan_name

(Optional) Trunking native mode VLAN name

trunk_vlans

(Optional) Trunking VLANs Allowed

fabricpath_topologies

(Optional) FabricPath Topologies Allowed

pruning_vlans

(Optional) Pruning eligible VLANs

admin_pvlan_pri_assoc

(Optional) Administrative private-vlan primary host-association

admin_pvlan_sec_assoc

(Optional) Administrative private-vlan secondary host-association

admin_pvlan_pri_mapping

(Optional) Administrative private-vlan primary mapping

admin_pvlan_sec_mapping

(Optional) Administrative private-vlan secondary mapping

admin_pvlan_trunk_native

(Optional) Administrative private-vlan trunk native VLAN

admin_pvlan_trunk_encap

(Optional) Administrative private-vlan trunk encapsulation

admin_pvlan_trunk_normal

(Optional) Administrative private-vlan trunk normal VLANs

admin_pvlan_trunk_private

(Optional) Administrative private-vlan trunk private VLANs

oper_pvlan

(Optional) Operational private-vlan

autostate_mode

(Optional) SVI Autostate Exclude Info

Command Mode

- /exec

show interface transceiver

show interface transceiver [ calibrations | details | inventory ] [ __readonly__ TABLE_interface <interface> [ <sfp> ] [ <type> ] [ <name> ] [ <partnum> ] [ <rev> ] [ <serialnum> ] [ <nom_bitrate> ] [ <len_9> ] [ <len_50> ] [ <len_625> ] [ <len_cu> ] [ <len_50_OM3> ] [ <txcvr_type> ] [ <connector_type> ] [ <bit_encoding> ] [ <protocol_type> ] [ <10gbe_code> ] [ <fiber_type_byte0> ] [ <fiber_type_byte1> ] [ <tx_range> ] [ <ciscoid> ] [ <ciscoid_1> ] [ <cisco_part_number> ] [ <cisco_product_id> ] [ <cisco_vendor_id> ] [ <temp_slope> ] [ <temp_offset> ] [ <volt_slope> ] [ <volt_offset> ] [ <curr_slope> ] [ <curr_offset> ] [ <tx_pwr_slope> ] [ <tx_pwr_offset> ] [ <rx_pwr_4> ] [ <rx_pwr_3> ] [ <rx_pwr_2> ] [ <rx_pwr_1> ] [ <rx_pwr_0> ] [ TABLE_lane [ <lane_number> ] [ <temperature> ] [ <temp_flag> ] [ <temp_alrm_hi> ] [ <temp_alrm_lo> ] [ <temp_warn_hi> ] [ <temp_warn_lo> ] [ <voltage> ] [ <volt_flag> ] [ <volt_alrm_hi> ] [ <volt_alrm_lo> ] [ <volt_warn_hi> ] [ <volt_warn_lo> ] [ <current> ] [ <current_flag> ] [ <current_alrm_hi> ] [ <current_alrm_lo> ] [ <current_warn_hi> ] [ <current_warn_lo> ] [ <tx_pwr> ] [ <tx_pwr_flag> ] [ <tx_pwr_alrm_hi> ] [ <tx_pwr_alrm_lo> ] [ <tx_pwr_warn_hi> ] [ <tx_pwr_warn_lo> ] [ <rx_pwr> ] [ <rx_pwr_flag> ] [ <rx_pwr_alrm_hi> ] [ <rx_pwr_alrm_lo> ] [ <rx_pwr_warn_hi> ] [ <rx_pwr_warn_lo> ] [ <xmit_faults> ] [ <snr> ] [ <snr_flag> ] [ <snr_alrm_hi> ] [ <snr_alrm_lo> ] [ <snr_warn_hi> ] [ <snr_warn_lo> ] [ <isi> ] [ <isi_flag> ] [ <isi_alrm_hi> ] [ <isi_alrm_lo> ] [ <isi_warn_hi> ] [ <isi_warn_lo> ] [ <pam> ] [ <pam_flag> ] [ <pam_alrm_hi> ] [ <pam_alrm_lo> ] [ <pam_warn_hi> ] [ <pam_warn_lo> ] [ <pre_fec_ber> ] [ <pre_fec_ber_flag> ] [ <pre_fec_ber_alrm_hi> ] [ <pre_fec_ber_alrm_lo> ] [ <pre_fec_ber_warn_hi> ] [ <pre_fec_ber_warn_lo> ] [ <uncorrect_ber> ] [ <uncorrect_ber_flag> ] [ <uncorrect_ber_alrm_hi> ] [ <uncorrect_ber_alrm_lo> ] [ <uncorrect_ber_warn_hi> ] [ <uncorrect_ber_warn_lo> ] [ <tec_current> ] [ <tec_current_flag> ] [ <tec_current_alrm_hi> ] [ <tec_current_alrm_lo> ] [ <tec_current_warn_hi> ] [ <tec_current_warn_lo> ] [ <laser_freq> ] [ <laser_freq_flag> ] [ <laser_freq_alrm_hi> ] [ <laser_freq_alrm_lo> ] [ <laser_freq_warn_hi> ] [ <laser_freq_warn_lo> ] [ <laser_temp> ] [ <laser_temp_flag> ] [ <laser_temp_alrm_hi> ] [ <laser_temp_alrm_lo> ] [ <laser_temp_warn_hi> ] [ <laser_temp_warn_lo> ] [ <pre_fec_ber_acc> ] [ <pre_fec_ber_acc_flag> ] [ <pre_fec_ber_acc_alrm_hi> ] [ <pre_fec_ber_acc_alrm_lo> ] [ <pre_fec_ber_acc_warn_hi> ] [ <pre_fec_ber_acc_warn_lo> ] [ <pre_fec_ber_min> ] [ <pre_fec_ber_min_flag> ] [ <pre_fec_ber_min_alrm_hi> ] [ <pre_fec_ber_min_alrm_lo> ] [ <pre_fec_ber_min_warn_hi> ] [ <pre_fec_ber_min_warn_lo> ] [ <pre_fec_ber_max> ] [ <pre_fec_ber_max_flag> ] [ <pre_fec_ber_max_alrm_hi> ] [ <pre_fec_ber_max_alrm_lo> ] [ <pre_fec_ber_max_warn_hi> ] [ <pre_fec_ber_max_warn_lo> ] [ <pre_fec_ber_cur> ] [ <pre_fec_ber_cur_flag> ] [ <pre_fec_ber_cur_alrm_hi> ] [ <pre_fec_ber_cur_alrm_lo> ] [ <pre_fec_ber_cur_warn_hi> ] [ <pre_fec_ber_cur_warn_lo> ] [ <uncorrect_ber_acc> ] [ <uncorrect_ber_acc_flag> ] [ <uncorrect_ber_acc_alrm_hi> ] [ <uncorrect_ber_acc_alrm_lo> ] [ <uncorrect_ber_acc_warn_hi> ] [ <uncorrect_ber_acc_warn_lo> ] [ <uncorrect_ber_min> ] [ <uncorrect_ber_min_flag> ] [ <uncorrect_ber_min_alrm_hi> ] [ <uncorrect_ber_min_alrm_lo> ] [ <uncorrect_ber_min_warn_hi> ] [ <uncorrect_ber_min_warn_lo> ] [ <uncorrect_ber_max> ] [ <uncorrect_ber_max_flag> ] [ <uncorrect_ber_max_alrm_hi> ] [ <uncorrect_ber_max_alrm_lo> ] [ <uncorrect_ber_max_warn_hi> ] [ <uncorrect_ber_max_warn_lo> ] [ <uncorrect_ber_cur> ] [ <uncorrect_ber_cur_flag> ] [ <uncorrect_ber_cur_alrm_hi> ] [ <uncorrect_ber_cur_alrm_lo> ] [ <uncorrect_ber_cur_warn_hi> ] [ <uncorrect_ber_cur_warn_lo> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

transceiver

Show interface transceiver information

calibrations

(Optional) Show interface transceiver calibration information

details

(Optional) Show interface transceiver detail information

inventory

(Optional) Show interface transceiver inventory

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

sfp

(Optional) sfp

type

(Optional) type

name

(Optional) Name

partnum

(Optional) part number

rev

(Optional) revision

serialnum

(Optional) serial number

nom_bitrate

(Optional) Nominal bit rate in MBits/sec

len_9

(Optional) Link length supported for 9/125um fiber

len_50

(Optional) Link length supported for 50/125um fiber

len_625

(Optional) Link length supported for 62.5/125um fiber

len_cu

(Optional) Link length supported for copper

len_50_OM3

(Optional) Link length supported for 50/125um fiber in m

txcvr_type

(Optional)

connector_type

(Optional)

bit_encoding

(Optional)

protocol_type

(Optional)

10gbe_code

(Optional)

fiber_type_byte0

(Optional)

fiber_type_byte1

(Optional)

tx_range

(Optional)

ciscoid

(Optional) Cisco extended id

ciscoid_1

(Optional) Cisco extended id number

cisco_part_number

(Optional) Cisco part number

cisco_product_id

(Optional) Cisco product identifier

cisco_vendor_id

(Optional) Cisco vendor identifier

temp_slope

(Optional) Temperature slope

temp_offset

(Optional) Temperature offset

volt_slope

(Optional) Voltage slope

volt_offset

(Optional) Voltage offset

curr_slope

(Optional) Current slope

curr_offset

(Optional) Current offset

tx_pwr_slope

(Optional) Tx power slope

tx_pwr_offset

(Optional) Tx power offset

rx_pwr_4

(Optional) Rx power 4

rx_pwr_3

(Optional) Rx power 3

rx_pwr_2

(Optional) Rx power 2

rx_pwr_1

(Optional) Rx power 1

rx_pwr_0

(Optional) Rx power 0

TABLE_lane

(Optional) show lane

lane_number

(Optional) Lane number

temperature

(Optional) Temperature

temp_flag

(Optional) Temperature Flag

temp_alrm_hi

(Optional) Temperature Alarm High

temp_alrm_lo

(Optional) Temperature Alarm Low

temp_warn_hi

(Optional) Temperature Warning High

temp_warn_lo

(Optional) Temperature Warning Low

voltage

(Optional) Voltage

volt_flag

(Optional) Voltage Flag

volt_alrm_hi

(Optional) Voltage Alarm High

volt_alrm_lo

(Optional) Voltage Alarm Low

volt_warn_hi

(Optional) Voltage Warning High

volt_warn_lo

(Optional) Voltage Warning Low

current

(Optional) Current

current_flag

(Optional) Current Flag

current_alrm_hi

(Optional) Current Alarm High

current_alrm_lo

(Optional) Current Alarm Low

current_warn_hi

(Optional) Current Warning High

current_warn_lo

(Optional) Current Warning Low

tx_pwr

(Optional) Tx Power

tx_pwr_flag

(Optional) Tx Power Flag

tx_pwr_alrm_hi

(Optional) Tx Power Alarm High

tx_pwr_alrm_lo

(Optional) Tx Power Alarm Low

tx_pwr_warn_hi

(Optional) Tx Power Warning High

tx_pwr_warn_lo

(Optional) Tx Power Warning Low

rx_pwr

(Optional) Rx Power

rx_pwr_flag

(Optional) Rx Power Flag

rx_pwr_alrm_hi

(Optional) Rx Power Alarm High

rx_pwr_alrm_lo

(Optional) Rx Power Alarm Low

rx_pwr_warn_hi

(Optional) Rx Power Warning High

rx_pwr_warn_lo

(Optional) Rx Power Warning Low

xmit_faults

(Optional) Transmit Fault Count

snr

(Optional) RX Signal-to-Noise Ratio (SNR)

snr_flag

(Optional) SNR Flag

snr_alrm_hi

(Optional) SNR Alarm High

snr_alrm_lo

(Optional) SNR Alarm Low

snr_warn_hi

(Optional) SNR Warning High

snr_warn_lo

(Optional) SNR Warning Low

isi

(Optional) Residual-Dispersion(ISI)

isi_flag

(Optional) ISI Flag

isi_alrm_hi

(Optional) ISI alarm high

isi_alrm_lo

(Optional) ISI alarm low

isi_warn_hi

(Optional) ISI warning high

isi_warn_lo

(Optional) ISI warning low

pam

(Optional) PAM Transition

pam_flag

(Optional) PAM Flag

pam_alrm_hi

(Optional) PAM alarm high

pam_alrm_lo

(Optional) PAM alarm low

pam_warn_hi

(Optional) PAM warning high

pam_warn_lo

(Optional) PAM warning low

pre_fec_ber

(Optional) Pre-FEC BER

pre_fec_ber_flag

(Optional) Pre-FEC BER flag

pre_fec_ber_alrm_hi

(Optional) Pre-FEC BER alarm high

pre_fec_ber_alrm_lo

(Optional) Pre-FEC BER alarm low

pre_fec_ber_warn_hi

(Optional) Pre-FEC BER warning high

pre_fec_ber_warn_lo

(Optional) Pre-FEC BER warning low

uncorrect_ber

(Optional) Uncorrected BER

uncorrect_ber_flag

(Optional) Uncorrected BER flag

uncorrect_ber_alrm_hi

(Optional) Uncorrected BER alarm high

uncorrect_ber_alrm_lo

(Optional) Uncorrected BER alarm low

uncorrect_ber_warn_hi

(Optional) Uncorrected BER warning high

uncorrect_ber_warn_lo

(Optional) Uncorrected BER warning low

tec_current

(Optional) TEC Current

tec_current_flag

(Optional) TEC Current flag

tec_current_alrm_hi

(Optional) TEC Current Alarm High

tec_current_alrm_lo

(Optional) TEC Current Alarm Low

tec_current_warn_hi

(Optional) TEC Current Warning High

tec_current_warn_lo

(Optional) TEC Current Warning Low

laser_freq

(Optional) Laser Frequency

laser_freq_flag

(Optional) Laser Frequency flag

laser_freq_alrm_hi

(Optional) Laser Frequency Alarm High

laser_freq_alrm_lo

(Optional) Laser Frequency Alarm Low

laser_freq_warn_hi

(Optional) Laser Frequency Warning High

laser_freq_warn_lo

(Optional) Laser Frequency Warning Low

laser_temp

(Optional) Laser Temperature

laser_temp_flag

(Optional) Laser Temperature flag

laser_temp_alrm_hi

(Optional) Laser Temperature Alarm High

laser_temp_alrm_lo

(Optional) Laser Temperature Alarm Low

laser_temp_warn_hi

(Optional) Laser Temperature Warning High

laser_temp_warn_lo

(Optional) Laser Temperature Warning Low

pre_fec_ber_acc

(Optional) Pre-FEC BER Acc

pre_fec_ber_acc_flag

(Optional) Pre-FEC BER Acc flag

pre_fec_ber_acc_alrm_hi

(Optional) Pre-FEC BER Acc alarm high

pre_fec_ber_acc_alrm_lo

(Optional) Pre-FEC BER Acc alarm low

pre_fec_ber_acc_warn_hi

(Optional) Pre-FEC BER Acc warning high

pre_fec_ber_acc_warn_lo

(Optional) Pre-FEC BER Acc warning low

pre_fec_ber_min

(Optional) Pre-FEC BER Min

pre_fec_ber_min_flag

(Optional) Pre-FEC BER Min flag

pre_fec_ber_min_alrm_hi

(Optional) Pre-FEC BER Min alarm high

pre_fec_ber_min_alrm_lo

(Optional) Pre-FEC BER Min alarm low

pre_fec_ber_min_warn_hi

(Optional) Pre-FEC BER Min warning high

pre_fec_ber_min_warn_lo

(Optional) Pre-FEC BER Min warning low

pre_fec_ber_max

(Optional) Pre-FEC BER Max

pre_fec_ber_max_flag

(Optional) Pre-FEC BER Max flag

pre_fec_ber_max_alrm_hi

(Optional) Pre-FEC BER Max alarm high

pre_fec_ber_max_alrm_lo

(Optional) Pre-FEC BER Max alarm low

pre_fec_ber_max_warn_hi

(Optional) Pre-FEC BER Max warning high

pre_fec_ber_max_warn_lo

(Optional) Pre-FEC BER Max warning low

pre_fec_ber_cur

(Optional) Pre-FEC BER Cur

pre_fec_ber_cur_flag

(Optional) Pre-FEC BER Cur flag

pre_fec_ber_cur_alrm_hi

(Optional) Pre-FEC BER Cur alarm high

pre_fec_ber_cur_alrm_lo

(Optional) Pre-FEC BER Cur alarm low

pre_fec_ber_cur_warn_hi

(Optional) Pre-FEC BER Cur warning high

pre_fec_ber_cur_warn_lo

(Optional) Pre-FEC BER Cur warning low

uncorrect_ber_acc

(Optional) Uncorrected BER Acc

uncorrect_ber_acc_flag

(Optional) Uncorrected BER Acc flag

uncorrect_ber_acc_alrm_hi

(Optional) Uncorrected BER Acc alarm high

uncorrect_ber_acc_alrm_lo

(Optional) Uncorrected BER Acc alarm low

uncorrect_ber_acc_warn_hi

(Optional) Uncorrected BER Acc warning high

uncorrect_ber_acc_warn_lo

(Optional) Uncorrected BER Acc warning low

uncorrect_ber_min

(Optional) Uncorrected BER Min

uncorrect_ber_min_flag

(Optional) Uncorrected BER Min flag

uncorrect_ber_min_alrm_hi

(Optional) Uncorrected BER Min alarm high

uncorrect_ber_min_alrm_lo

(Optional) Uncorrected BER Min alarm low

uncorrect_ber_min_warn_hi

(Optional) Uncorrected BER Min warning high

uncorrect_ber_min_warn_lo

(Optional) Uncorrected BER Min warning low

uncorrect_ber_max

(Optional) Uncorrected BER Max

uncorrect_ber_max_flag

(Optional) Uncorrected BER Max flag

uncorrect_ber_max_alrm_hi

(Optional) Uncorrected BER Max alarm high

uncorrect_ber_max_alrm_lo

(Optional) Uncorrected BER Max alarm low

uncorrect_ber_max_warn_hi

(Optional) Uncorrected BER Max warning high

uncorrect_ber_max_warn_lo

(Optional) Uncorrected BER Max warning low

uncorrect_ber_cur

(Optional) Uncorrected BER Cur

uncorrect_ber_cur_flag

(Optional) Uncorrected BER Cur flag

uncorrect_ber_cur_alrm_hi

(Optional) Uncorrected BER Cur alarm high

uncorrect_ber_cur_alrm_lo

(Optional) Uncorrected BER Cur alarm low

uncorrect_ber_cur_warn_hi

(Optional) Uncorrected BER Cur warning high

uncorrect_ber_cur_warn_lo

(Optional) Uncorrected BER Cur warning low

Command Mode

- /exec

show interface transceiver

show interface <ifid_transceiver> transceiver [ calibrations | details | sprom ] [ __readonly__ TABLE_interface <interface> [ <sfp> ] [ <type> ] [ <name> ] [ <partnum> ] [ <rev> ] [ <serialnum> ] [ <nom_bitrate> ] [ <len_9> ] [ <len_9_2> ] [ <len_50> ] [ <len_625> ] [ <len_cu> ] [ <len_50_OM3> ] [ <txcvr_type> ] [ <connector_type> ] [ <bit_encoding> ] [ <protocol_type> ] [ <10gbe_code> ] [ <fiber_type_byte0> ] [ <fiber_type_byte1> ] [ <tx_range> ] [ <ciscoid> ] [ <ciscoid_1> ] [ <cisco_part_number> ] [ <cisco_product_id> ] [ <cisco_vendor_id> ] [ <temp_slope> ] [ <temp_offset> ] [ <volt_slope> ] [ <volt_offset> ] [ <curr_slope> ] [ <curr_offset> ] [ <tx_pwr_slope> ] [ <tx_pwr_offset> ] [ <rx_pwr_4> ] [ <rx_pwr_3> ] [ <rx_pwr_2> ] [ <rx_pwr_1> ] [ <rx_pwr_0> ] [ TABLE_lane [ <lane_number> ] [ <temperature> ] [ <temp_flag> ] [ <temp_alrm_hi> ] [ <temp_alrm_lo> ] [ <temp_warn_hi> ] [ <temp_warn_lo> ] [ <voltage> ] [ <volt_flag> ] [ <volt_alrm_hi> ] [ <volt_alrm_lo> ] [ <volt_warn_hi> ] [ <volt_warn_lo> ] [ <current> ] [ <current_flag> ] [ <current_alrm_hi> ] [ <current_alrm_lo> ] [ <current_warn_hi> ] [ <current_warn_lo> ] [ <tx_pwr> ] [ <tx_pwr_flag> ] [ <tx_pwr_alrm_hi> ] [ <tx_pwr_alrm_lo> ] [ <tx_pwr_warn_hi> ] [ <tx_pwr_warn_lo> ] [ <rx_pwr> ] [ <rx_pwr_flag> ] [ <rx_pwr_alrm_hi> ] [ <rx_pwr_alrm_lo> ] [ <rx_pwr_warn_hi> ] [ <rx_pwr_warn_lo> ] [ <xmit_faults> ] [ <snr> ] [ <snr_flag> ] [ <snr_alrm_hi> ] [ <snr_alrm_lo> ] [ <snr_warn_hi> ] [ <snr_warn_lo> ] [ <isi> ] [ <isi_flag> ] [ <isi_alrm_hi> ] [ <isi_alrm_lo> ] [ <isi_warn_hi> ] [ <isi_warn_lo> ] [ <pam> ] [ <pam_flag> ] [ <pam_alrm_hi> ] [ <pam_alrm_lo> ] [ <pam_warn_hi> ] [ <pam_warn_lo> ] [ <pre_fec_ber> ] [ <pre_fec_ber_flag> ] [ <pre_fec_ber_alrm_hi> ] [ <pre_fec_ber_alrm_lo> ] [ <pre_fec_ber_warn_hi> ] [ <pre_fec_ber_warn_lo> ] [ <uncorrect_ber> ] [ <uncorrect_ber_flag> ] [ <uncorrect_ber_alrm_hi> ] [ <uncorrect_ber_alrm_lo> ] [ <uncorrect_ber_warn_hi> ] [ <uncorrect_ber_warn_lo> ] [ <tec_current> ] [ <tec_current_flag> ] [ <tec_current_alrm_hi> ] [ <tec_current_alrm_lo> ] [ <tec_current_warn_hi> ] [ <tec_current_warn_lo> ] [ <laser_freq> ] [ <laser_freq_flag> ] [ <laser_freq_alrm_hi> ] [ <laser_freq_alrm_lo> ] [ <laser_freq_warn_hi> ] [ <laser_freq_warn_lo> ] [ <laser_temp> ] [ <laser_temp_flag> ] [ <laser_temp_alrm_hi> ] [ <laser_temp_alrm_lo> ] [ <laser_temp_warn_hi> ] [ <laser_temp_warn_lo> ] [ <pre_fec_ber_acc> ] [ <pre_fec_ber_acc_flag> ] [ <pre_fec_ber_acc_alrm_hi> ] [ <pre_fec_ber_acc_alrm_lo> ] [ <pre_fec_ber_acc_warn_hi> ] [ <pre_fec_ber_acc_warn_lo> ] [ <pre_fec_ber_min> ] [ <pre_fec_ber_min_flag> ] [ <pre_fec_ber_min_alrm_hi> ] [ <pre_fec_ber_min_alrm_lo> ] [ <pre_fec_ber_min_warn_hi> ] [ <pre_fec_ber_min_warn_lo> ] [ <pre_fec_ber_max> ] [ <pre_fec_ber_max_flag> ] [ <pre_fec_ber_max_alrm_hi> ] [ <pre_fec_ber_max_alrm_lo> ] [ <pre_fec_ber_max_warn_hi> ] [ <pre_fec_ber_max_warn_lo> ] [ <pre_fec_ber_cur> ] [ <pre_fec_ber_cur_flag> ] [ <pre_fec_ber_cur_alrm_hi> ] [ <pre_fec_ber_cur_alrm_lo> ] [ <pre_fec_ber_cur_warn_hi> ] [ <pre_fec_ber_cur_warn_lo> ] [ <uncorrect_ber_acc> ] [ <uncorrect_ber_acc_flag> ] [ <uncorrect_ber_acc_alrm_hi> ] [ <uncorrect_ber_acc_alrm_lo> ] [ <uncorrect_ber_acc_warn_hi> ] [ <uncorrect_ber_acc_warn_lo> ] [ <uncorrect_ber_min> ] [ <uncorrect_ber_min_flag> ] [ <uncorrect_ber_min_alrm_hi> ] [ <uncorrect_ber_min_alrm_lo> ] [ <uncorrect_ber_min_warn_hi> ] [ <uncorrect_ber_min_warn_lo> ] [ <uncorrect_ber_max> ] [ <uncorrect_ber_max_flag> ] [ <uncorrect_ber_max_alrm_hi> ] [ <uncorrect_ber_max_alrm_lo> ] [ <uncorrect_ber_max_warn_hi> ] [ <uncorrect_ber_max_warn_lo> ] [ <uncorrect_ber_cur> ] [ <uncorrect_ber_cur_flag> ] [ <uncorrect_ber_cur_alrm_hi> ] [ <uncorrect_ber_cur_alrm_lo> ] [ <uncorrect_ber_cur_warn_hi> ] [ <uncorrect_ber_cur_warn_lo> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifid_transceiver

Enter interface type and number in module/slot format

transceiver

Show interface transceiver information

calibrations

(Optional) Show interface transceiver calibration information

details

(Optional) Show interface transceiver detail information

sprom

(Optional) Show interface transceiver sprom information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

sfp

(Optional) sfp

type

(Optional) type

name

(Optional) Name

partnum

(Optional) part number

rev

(Optional) revision

serialnum

(Optional) serial number

nom_bitrate

(Optional) Nominal bit rate in MBits/sec

len_9

(Optional) Link length supported for 9/125um fiber in Km

len_9_2

(Optional) Link length supported for 9/125um fiber in m

len_50

(Optional) Link length supported for 50/125um fiber in m

len_625

(Optional) Link length supported for 62.5/125um fiber in m

len_cu

(Optional) Link length supported for copper sfp in m

len_50_OM3

(Optional) Link length supported for 50/125um fiber in m

txcvr_type

(Optional)

connector_type

(Optional)

bit_encoding

(Optional)

protocol_type

(Optional)

10gbe_code

(Optional)

fiber_type_byte0

(Optional)

fiber_type_byte1

(Optional)

tx_range

(Optional)

ciscoid

(Optional) Cisco extended id

ciscoid_1

(Optional) Cisco extended id number

cisco_part_number

(Optional) Cisco part number

cisco_product_id

(Optional) Cisco product identifier

cisco_vendor_id

(Optional) Cisco vendor identifier

temp_slope

(Optional) Temperature slope

temp_offset

(Optional) Temperature offset

volt_slope

(Optional) Voltage slope

volt_offset

(Optional) Voltage offset

curr_slope

(Optional) Current slope

curr_offset

(Optional) Current offset

tx_pwr_slope

(Optional) Tx power slope

tx_pwr_offset

(Optional) Tx power offset

rx_pwr_4

(Optional) Rx power 4

rx_pwr_3

(Optional) Rx power 3

rx_pwr_2

(Optional) Rx power 2

rx_pwr_1

(Optional) Rx power 1

rx_pwr_0

(Optional) Rx power 0

TABLE_lane

(Optional) show lane

lane_number

(Optional) Lane number

temperature

(Optional) Temperature

temp_flag

(Optional) Temperature Flag

temp_alrm_hi

(Optional) Temperature Alarm High

temp_alrm_lo

(Optional) Temperature Alarm Low

temp_warn_hi

(Optional) Temperature Warning High

temp_warn_lo

(Optional) Temperature Warning Low

voltage

(Optional) Voltage

volt_flag

(Optional) Voltage Flag

volt_alrm_hi

(Optional) Voltage Alarm High

volt_alrm_lo

(Optional) Voltage Alarm Low

volt_warn_hi

(Optional) Voltage Warning High

volt_warn_lo

(Optional) Voltage Warning Low

current

(Optional) Current

current_flag

(Optional) Current Flag

current_alrm_hi

(Optional) Current Alarm High

current_alrm_lo

(Optional) Current Alarm Low

current_warn_hi

(Optional) Current Warning High

current_warn_lo

(Optional) Current Warning Low

tx_pwr

(Optional) Tx Power

tx_pwr_flag

(Optional) Tx Power Flag

tx_pwr_alrm_hi

(Optional) Tx Power Alarm High

tx_pwr_alrm_lo

(Optional) Tx Power Alarm Low

tx_pwr_warn_hi

(Optional) Tx Power Warning High

tx_pwr_warn_lo

(Optional) Tx Power Warning Low

rx_pwr

(Optional) Rx Power

rx_pwr_flag

(Optional) Rx Power Flag

rx_pwr_alrm_hi

(Optional) Rx Power Alarm High

rx_pwr_alrm_lo

(Optional) Rx Power Alarm Low

rx_pwr_warn_hi

(Optional) Rx Power Warning High

rx_pwr_warn_lo

(Optional) Rx Power Warning Low

xmit_faults

(Optional) Transmit Fault Count

snr

(Optional) RX Signal-to-Noise Ratio (SNR)

snr_flag

(Optional) SNR Flag

snr_alrm_hi

(Optional) SNR Alarm High

snr_alrm_lo

(Optional) SNR Alarm Low

snr_warn_hi

(Optional) SNR Warning High

snr_warn_lo

(Optional) SNR Warning Low

isi

(Optional) Residual-Dispersion(ISI)

isi_flag

(Optional) ISI Flag

isi_alrm_hi

(Optional) ISI alarm high

isi_alrm_lo

(Optional) ISI alarm low

isi_warn_hi

(Optional) ISI warning high

isi_warn_lo

(Optional) ISI warning low

pam

(Optional) PAM Transition

pam_flag

(Optional) PAM Flag

pam_alrm_hi

(Optional) PAM alarm high

pam_alrm_lo

(Optional) PAM alarm low

pam_warn_hi

(Optional) PAM warning high

pam_warn_lo

(Optional) PAM warning low

pre_fec_ber

(Optional) Pre-FEC BER

pre_fec_ber_flag

(Optional) Pre-FEC BER flag

pre_fec_ber_alrm_hi

(Optional) Pre-FEC BER alarm high

pre_fec_ber_alrm_lo

(Optional) Pre-FEC BER alarm low

pre_fec_ber_warn_hi

(Optional) Pre-FEC BER warning high

pre_fec_ber_warn_lo

(Optional) Pre-FEC BER warning low

uncorrect_ber

(Optional) Uncorrected BER

uncorrect_ber_flag

(Optional) Uncorrected BER flag

uncorrect_ber_alrm_hi

(Optional) Uncorrected BER alarm high

uncorrect_ber_alrm_lo

(Optional) Uncorrected BER alarm low

uncorrect_ber_warn_hi

(Optional) Uncorrected BER warning high

uncorrect_ber_warn_lo

(Optional) Uncorrected BER warning low

tec_current

(Optional) TEC Current

tec_current_flag

(Optional) TEC Current flag

tec_current_alrm_hi

(Optional) TEC Current Alarm High

tec_current_alrm_lo

(Optional) TEC Current Alarm Low

tec_current_warn_hi

(Optional) TEC Current Warning High

tec_current_warn_lo

(Optional) TEC Current Warning Low

laser_freq

(Optional) Laser Frequency

laser_freq_flag

(Optional) Laser Frequency flag

laser_freq_alrm_hi

(Optional) Laser Frequency Alarm High

laser_freq_alrm_lo

(Optional) Laser Frequency Alarm Low

laser_freq_warn_hi

(Optional) Laser Frequency Warning High

laser_freq_warn_lo

(Optional) Laser Frequency Warning Low

laser_temp

(Optional) Laser Temperature

laser_temp_flag

(Optional) Laser Temperature flag

laser_temp_alrm_hi

(Optional) Laser Temperature Alarm High

laser_temp_alrm_lo

(Optional) Laser Temperature Alarm Low

laser_temp_warn_hi

(Optional) Laser Temperature Warning High

laser_temp_warn_lo

(Optional) Laser Temperature Warning Low

pre_fec_ber_acc

(Optional) Pre-FEC BER Acc

pre_fec_ber_acc_flag

(Optional) Pre-FEC BER Acc flag

pre_fec_ber_acc_alrm_hi

(Optional) Pre-FEC BER Acc alarm high

pre_fec_ber_acc_alrm_lo

(Optional) Pre-FEC BER Acc alarm low

pre_fec_ber_acc_warn_hi

(Optional) Pre-FEC BER Acc warning high

pre_fec_ber_acc_warn_lo

(Optional) Pre-FEC BER Acc warning low

pre_fec_ber_min

(Optional) Pre-FEC BER Min

pre_fec_ber_min_flag

(Optional) Pre-FEC BER Min flag

pre_fec_ber_min_alrm_hi

(Optional) Pre-FEC BER Min alarm high

pre_fec_ber_min_alrm_lo

(Optional) Pre-FEC BER Min alarm low

pre_fec_ber_min_warn_hi

(Optional) Pre-FEC BER Min warning high

pre_fec_ber_min_warn_lo

(Optional) Pre-FEC BER Min warning low

pre_fec_ber_max

(Optional) Pre-FEC BER Max

pre_fec_ber_max_flag

(Optional) Pre-FEC BER Max flag

pre_fec_ber_max_alrm_hi

(Optional) Pre-FEC BER Max alarm high

pre_fec_ber_max_alrm_lo

(Optional) Pre-FEC BER Max alarm low

pre_fec_ber_max_warn_hi

(Optional) Pre-FEC BER Max warning high

pre_fec_ber_max_warn_lo

(Optional) Pre-FEC BER Max warning low

pre_fec_ber_cur

(Optional) Pre-FEC BER Cur

pre_fec_ber_cur_flag

(Optional) Pre-FEC BER Cur flag

pre_fec_ber_cur_alrm_hi

(Optional) Pre-FEC BER Cur alarm high

pre_fec_ber_cur_alrm_lo

(Optional) Pre-FEC BER Cur alarm low

pre_fec_ber_cur_warn_hi

(Optional) Pre-FEC BER Cur warning high

pre_fec_ber_cur_warn_lo

(Optional) Pre-FEC BER Cur warning low

uncorrect_ber_acc

(Optional) Uncorrected BER Acc

uncorrect_ber_acc_flag

(Optional) Uncorrected BER Acc flag

uncorrect_ber_acc_alrm_hi

(Optional) Uncorrected BER Acc alarm high

uncorrect_ber_acc_alrm_lo

(Optional) Uncorrected BER Acc alarm low

uncorrect_ber_acc_warn_hi

(Optional) Uncorrected BER Acc warning high

uncorrect_ber_acc_warn_lo

(Optional) Uncorrected BER Acc warning low

uncorrect_ber_min

(Optional) Uncorrected BER Min

uncorrect_ber_min_flag

(Optional) Uncorrected BER Min flag

uncorrect_ber_min_alrm_hi

(Optional) Uncorrected BER Min alarm high

uncorrect_ber_min_alrm_lo

(Optional) Uncorrected BER Min alarm low

uncorrect_ber_min_warn_hi

(Optional) Uncorrected BER Min warning high

uncorrect_ber_min_warn_lo

(Optional) Uncorrected BER Min warning low

uncorrect_ber_max

(Optional) Uncorrected BER Max

uncorrect_ber_max_flag

(Optional) Uncorrected BER Max flag

uncorrect_ber_max_alrm_hi

(Optional) Uncorrected BER Max alarm high

uncorrect_ber_max_alrm_lo

(Optional) Uncorrected BER Max alarm low

uncorrect_ber_max_warn_hi

(Optional) Uncorrected BER Max warning high

uncorrect_ber_max_warn_lo

(Optional) Uncorrected BER Max warning low

uncorrect_ber_cur

(Optional) Uncorrected BER Cur

uncorrect_ber_cur_flag

(Optional) Uncorrected BER Cur flag

uncorrect_ber_cur_alrm_hi

(Optional) Uncorrected BER Cur alarm high

uncorrect_ber_cur_alrm_lo

(Optional) Uncorrected BER Cur alarm low

uncorrect_ber_cur_warn_hi

(Optional) Uncorrected BER Cur warning high

uncorrect_ber_cur_warn_lo

(Optional) Uncorrected BER Cur warning low

Command Mode

- /exec

show interface transceiver fex-fabric

show interface transceiver fex-fabric [ calibrations | details ] [ __readonly__ TABLE_interface <interface> [ <sfp> ] [ <type> ] [ <name> ] [ <partnum> ] [ <rev> ] [ <serialnum> ] [ <nom_bitrate> ] [ <len_50> ] [ <len_625> ] [ <ciscoid> ] [ <ciscoid_1> ] [ <temp_slope> ] [ <temp_offset> ] [ <volt_slope> ] [ <volt_offset> ] [ <curr_slope> ] [ <curr_offset> ] [ <tx_pwr_slope> ] [ <tx_pwr_offset> ] [ <rx_pwr_4> ] [ <rx_pwr_3> ] [ <rx_pwr_2> ] [ <rx_pwr_1> ] [ <rx_pwr_0> ] [ <lane_number> ] [ <temperature> ] [ <temp_flag> ] [ <temp_alrm_hi> ] [ <temp_alrm_lo> ] [ <temp_warn_hi> ] [ <temp_warn_lo> ] [ <voltage> ] [ <volt_flag> ] [ <volt_alrm_hi> ] [ <volt_alrm_lo> ] [ <volt_warn_hi> ] [ <volt_warn_lo> ] [ <current> ] [ <current_flag> ] [ <current_alrm_hi> ] [ <current_alrm_lo> ] [ <current_warn_hi> ] [ <current_warn_lo> ] [ <tx_pwr> ] [ <tx_pwr_flag> ] [ <tx_pwr_alrm_hi> ] [ <tx_pwr_alrm_lo> ] [ <tx_pwr_warn_hi> ] [ <tx_pwr_warn_lo> ] [ <rx_pwr> ] [ <rx_pwr_flag> ] [ <rx_pwr_alrm_hi> ] [ <rx_pwr_alrm_lo> ] [ <rx_pwr_warn_hi> ] [ <rx_pwr_warn_lo> ] [ <xmit_faults> ] [ <snr> ] [ <snr_flag> ] [ <snr_alrm_hi> ] [ <snr_alrm_lo> ] [ <snr_warn_hi> ] [ <snr_warn_lo> ] [ <isi> ] [ <isi_flag> ] [ <isi_alrm_hi> ] [ <isi_alrm_lo> ] [ <isi_warn_hi> ] [ <isi_warn_lo> ] [ <pam> ] [ <pam_flag> ] [ <pam_alrm_hi> ] [ <pam_alrm_lo> ] [ <pam_warn_hi> ] [ <pam_warn_lo> ] [ <pre_fec_ber> ] [ <pre_fec_ber_flag> ] [ <pre_fec_ber_alrm_hi> ] [ <pre_fec_ber_alrm_lo> ] [ <pre_fec_ber_warn_hi> ] [ <pre_fec_ber_warn_lo> ] [ <uncorrect_ber> ] [ <uncorrect_ber_flag> ] [ <uncorrect_ber_alrm_hi> ] [ <uncorrect_ber_alrm_lo> ] [ <uncorrect_ber_warn_hi> ] [ <uncorrect_ber_warn_lo> ] [ <tec_current> ] [ <tec_current_flag> ] [ <tec_current_alrm_hi> ] [ <tec_current_alrm_lo> ] [ <tec_current_warn_hi> ] [ <tec_current_warn_lo> ] [ <laser_freq> ] [ <laser_freq_flag> ] [ <laser_freq_alrm_hi> ] [ <laser_freq_alrm_lo> ] [ <laser_freq_warn_hi> ] [ <laser_freq_warn_lo> ] [ <laser_temp> ] [ <laser_temp_flag> ] [ <laser_temp_alrm_hi> ] [ <laser_temp_alrm_lo> ] [ <laser_temp_warn_hi> ] [ <laser_temp_warn_lo> ] [ <pre_fec_ber_acc> ] [ <pre_fec_ber_acc_flag> ] [ <pre_fec_ber_acc_alrm_hi> ] [ <pre_fec_ber_acc_alrm_lo> ] [ <pre_fec_ber_acc_warn_hi> ] [ <pre_fec_ber_acc_warn_lo> ] [ <pre_fec_ber_min> ] [ <pre_fec_ber_min_flag> ] [ <pre_fec_ber_min_alrm_hi> ] [ <pre_fec_ber_min_alrm_lo> ] [ <pre_fec_ber_min_warn_hi> ] [ <pre_fec_ber_min_warn_lo> ] [ <pre_fec_ber_max> ] [ <pre_fec_ber_max_flag> ] [ <pre_fec_ber_max_alrm_hi> ] [ <pre_fec_ber_max_alrm_lo> ] [ <pre_fec_ber_max_warn_hi> ] [ <pre_fec_ber_max_warn_lo> ] [ <pre_fec_ber_cur> ] [ <pre_fec_ber_cur_flag> ] [ <pre_fec_ber_cur_alrm_hi> ] [ <pre_fec_ber_cur_alrm_lo> ] [ <pre_fec_ber_cur_warn_hi> ] [ <pre_fec_ber_cur_warn_lo> ] [ <uncorrect_ber_acc> ] [ <uncorrect_ber_acc_flag> ] [ <uncorrect_ber_acc_alrm_hi> ] [ <uncorrect_ber_acc_alrm_lo> ] [ <uncorrect_ber_acc_warn_hi> ] [ <uncorrect_ber_acc_warn_lo> ] [ <uncorrect_ber_min> ] [ <uncorrect_ber_min_flag> ] [ <uncorrect_ber_min_alrm_hi> ] [ <uncorrect_ber_min_alrm_lo> ] [ <uncorrect_ber_min_warn_hi> ] [ <uncorrect_ber_min_warn_lo> ] [ <uncorrect_ber_max> ] [ <uncorrect_ber_max_flag> ] [ <uncorrect_ber_max_alrm_hi> ] [ <uncorrect_ber_max_alrm_lo> ] [ <uncorrect_ber_max_warn_hi> ] [ <uncorrect_ber_max_warn_lo> ] [ <uncorrect_ber_cur> ] [ <uncorrect_ber_cur_flag> ] [ <uncorrect_ber_cur_alrm_hi> ] [ <uncorrect_ber_cur_alrm_lo> ] [ <uncorrect_ber_cur_warn_hi> ] [ <uncorrect_ber_cur_warn_lo> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

transceiver

Show interface transceiver information

fex-fabric

Show FEX interface transceiver information

calibrations

(Optional) Show interface transceiver calibration information

details

(Optional) Show interface transceiver detail information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

sfp

(Optional) sfp

type

(Optional) type

name

(Optional) Name

partnum

(Optional) part number

rev

(Optional) revision

serialnum

(Optional) serial number

nom_bitrate

(Optional) Nominal bit rate in MBits/sec

len_50

(Optional) Link length supported for 50/125mm fiber

len_625

(Optional) Link length supported for 62.5/125mm fiber

ciscoid

(Optional) Cisco extended id

ciscoid_1

(Optional) Cisco extended id number

temp_slope

(Optional) Temperature slope

temp_offset

(Optional) Temperature offset

volt_slope

(Optional) Voltage slope

volt_offset

(Optional) Voltage offset

curr_slope

(Optional) Current slope

curr_offset

(Optional) Current offset

tx_pwr_slope

(Optional) Tx power slope

tx_pwr_offset

(Optional) Tx power offset

rx_pwr_4

(Optional) Rx power 4

rx_pwr_3

(Optional) Rx power 3

rx_pwr_2

(Optional) Rx power 2

rx_pwr_1

(Optional) Rx power 1

rx_pwr_0

(Optional) Rx power 0

lane_number

(Optional) Lane number

temperature

(Optional) Temperature

temp_flag

(Optional) Temperature Flag

temp_alrm_hi

(Optional) Temperature Alarm High

temp_alrm_lo

(Optional) Temperature Alarm Low

temp_warn_hi

(Optional) Temperature Warning High

temp_warn_lo

(Optional) Temperature Warning Low

voltage

(Optional) Voltage

volt_flag

(Optional) Voltage Flag

volt_alrm_hi

(Optional) Voltage Alarm High

volt_alrm_lo

(Optional) Voltage Alarm Low

volt_warn_hi

(Optional) Voltage Warning High

volt_warn_lo

(Optional) Voltage Warning Low

current

(Optional) Current

current_flag

(Optional) Current Flag

current_alrm_hi

(Optional) Current Alarm High

current_alrm_lo

(Optional) Current Alarm Low

current_warn_hi

(Optional) Current Warning High

current_warn_lo

(Optional) Current Warning Low

tx_pwr

(Optional) Tx Power

tx_pwr_flag

(Optional) Tx Power Flag

tx_pwr_alrm_hi

(Optional) Tx Power Alarm High

tx_pwr_alrm_lo

(Optional) Tx Power Alarm Low

tx_pwr_warn_hi

(Optional) Tx Power Warning High

tx_pwr_warn_lo

(Optional) Tx Power Warning Low

rx_pwr

(Optional) Rx Power

rx_pwr_flag

(Optional) Rx Power Flag

rx_pwr_alrm_hi

(Optional) Rx Power Alarm High

rx_pwr_alrm_lo

(Optional) Rx Power Alarm Low

rx_pwr_warn_hi

(Optional) Rx Power Warning High

rx_pwr_warn_lo

(Optional) Rx Power Warning Low

xmit_faults

(Optional) Transmit Fault Count

snr

(Optional) RX Signal-to-Noise Ratio (SNR)

snr_flag

(Optional) SNR Flag

snr_alrm_hi

(Optional) SNR Alarm High

snr_alrm_lo

(Optional) SNR Alarm Low

snr_warn_hi

(Optional) SNR Warning High

snr_warn_lo

(Optional) SNR Warning Low

isi

(Optional) Residual-Dispersion(ISI)

isi_flag

(Optional) ISI Flag

isi_alrm_hi

(Optional) ISI alarm high

isi_alrm_lo

(Optional) ISI alarm low

isi_warn_hi

(Optional) ISI warning high

isi_warn_lo

(Optional) ISI warning low

pam

(Optional) PAM Transition

pam_flag

(Optional) PAM Flag

pam_alrm_hi

(Optional) PAM alarm high

pam_alrm_lo

(Optional) PAM alarm low

pam_warn_hi

(Optional) PAM warning high

pam_warn_lo

(Optional) PAM warning low

pre_fec_ber

(Optional) Pre-FEC BER

pre_fec_ber_flag

(Optional) Pre-FEC BER flag

pre_fec_ber_alrm_hi

(Optional) Pre-FEC BER alarm high

pre_fec_ber_alrm_lo

(Optional) Pre-FEC BER alarm low

pre_fec_ber_warn_hi

(Optional) Pre-FEC BER warning high

pre_fec_ber_warn_lo

(Optional) Pre-FEC BER warning low

uncorrect_ber

(Optional) Uncorrected BER

uncorrect_ber_flag

(Optional) Uncorrected BER flag

uncorrect_ber_alrm_hi

(Optional) Uncorrected BER alarm high

uncorrect_ber_alrm_lo

(Optional) Uncorrected BER alarm low

uncorrect_ber_warn_hi

(Optional) Uncorrected BER warning high

uncorrect_ber_warn_lo

(Optional) Uncorrected BER warning low

tec_current

(Optional) TEC Current

tec_current_flag

(Optional) TEC Current flag

tec_current_alrm_hi

(Optional) TEC Current Alarm High

tec_current_alrm_lo

(Optional) TEC Current Alarm Low

tec_current_warn_hi

(Optional) TEC Current Warning High

tec_current_warn_lo

(Optional) TEC Current Warning Low

laser_freq

(Optional) Laser Frequency

laser_freq_flag

(Optional) Laser Frequency flag

laser_freq_alrm_hi

(Optional) Laser Frequency Alarm High

laser_freq_alrm_lo

(Optional) Laser Frequency Alarm Low

laser_freq_warn_hi

(Optional) Laser Frequency Warning High

laser_freq_warn_lo

(Optional) Laser Frequency Warning Low

laser_temp

(Optional) Laser Temperature

laser_temp_flag

(Optional) Laser Temperature flag

laser_temp_alrm_hi

(Optional) Laser Temperature Alarm High

laser_temp_alrm_lo

(Optional) Laser Temperature Alarm Low

laser_temp_warn_hi

(Optional) Laser Temperature Warning High

laser_temp_warn_lo

(Optional) Laser Temperature Warning Low

pre_fec_ber_acc

(Optional) Pre-FEC BER Acc

pre_fec_ber_acc_flag

(Optional) Pre-FEC BER Acc flag

pre_fec_ber_acc_alrm_hi

(Optional) Pre-FEC BER Acc alarm high

pre_fec_ber_acc_alrm_lo

(Optional) Pre-FEC BER Acc alarm low

pre_fec_ber_acc_warn_hi

(Optional) Pre-FEC BER Acc warning high

pre_fec_ber_acc_warn_lo

(Optional) Pre-FEC BER Acc warning low

pre_fec_ber_min

(Optional) Pre-FEC BER Min

pre_fec_ber_min_flag

(Optional) Pre-FEC BER Min flag

pre_fec_ber_min_alrm_hi

(Optional) Pre-FEC BER Min alarm high

pre_fec_ber_min_alrm_lo

(Optional) Pre-FEC BER Min alarm low

pre_fec_ber_min_warn_hi

(Optional) Pre-FEC BER Min warning high

pre_fec_ber_min_warn_lo

(Optional) Pre-FEC BER Min warning low

pre_fec_ber_max

(Optional) Pre-FEC BER Max

pre_fec_ber_max_flag

(Optional) Pre-FEC BER Max flag

pre_fec_ber_max_alrm_hi

(Optional) Pre-FEC BER Max alarm high

pre_fec_ber_max_alrm_lo

(Optional) Pre-FEC BER Max alarm low

pre_fec_ber_max_warn_hi

(Optional) Pre-FEC BER Max warning high

pre_fec_ber_max_warn_lo

(Optional) Pre-FEC BER Max warning low

pre_fec_ber_cur

(Optional) Pre-FEC BER Cur

pre_fec_ber_cur_flag

(Optional) Pre-FEC BER Cur flag

pre_fec_ber_cur_alrm_hi

(Optional) Pre-FEC BER Cur alarm high

pre_fec_ber_cur_alrm_lo

(Optional) Pre-FEC BER Cur alarm low

pre_fec_ber_cur_warn_hi

(Optional) Pre-FEC BER Cur warning high

pre_fec_ber_cur_warn_lo

(Optional) Pre-FEC BER Cur warning low

uncorrect_ber_acc

(Optional) Uncorrected BER Acc

uncorrect_ber_acc_flag

(Optional) Uncorrected BER Acc flag

uncorrect_ber_acc_alrm_hi

(Optional) Uncorrected BER Acc alarm high

uncorrect_ber_acc_alrm_lo

(Optional) Uncorrected BER Acc alarm low

uncorrect_ber_acc_warn_hi

(Optional) Uncorrected BER Acc warning high

uncorrect_ber_acc_warn_lo

(Optional) Uncorrected BER Acc warning low

uncorrect_ber_min

(Optional) Uncorrected BER Min

uncorrect_ber_min_flag

(Optional) Uncorrected BER Min flag

uncorrect_ber_min_alrm_hi

(Optional) Uncorrected BER Min alarm high

uncorrect_ber_min_alrm_lo

(Optional) Uncorrected BER Min alarm low

uncorrect_ber_min_warn_hi

(Optional) Uncorrected BER Min warning high

uncorrect_ber_min_warn_lo

(Optional) Uncorrected BER Min warning low

uncorrect_ber_max

(Optional) Uncorrected BER Max

uncorrect_ber_max_flag

(Optional) Uncorrected BER Max flag

uncorrect_ber_max_alrm_hi

(Optional) Uncorrected BER Max alarm high

uncorrect_ber_max_alrm_lo

(Optional) Uncorrected BER Max alarm low

uncorrect_ber_max_warn_hi

(Optional) Uncorrected BER Max warning high

uncorrect_ber_max_warn_lo

(Optional) Uncorrected BER Max warning low

uncorrect_ber_cur

(Optional) Uncorrected BER Cur

uncorrect_ber_cur_flag

(Optional) Uncorrected BER Cur flag

uncorrect_ber_cur_alrm_hi

(Optional) Uncorrected BER Cur alarm high

uncorrect_ber_cur_alrm_lo

(Optional) Uncorrected BER Cur alarm low

uncorrect_ber_cur_warn_hi

(Optional) Uncorrected BER Cur warning high

uncorrect_ber_cur_warn_lo

(Optional) Uncorrected BER Cur warning low

Command Mode

- /exec

show interface transceiver fex-fabric

show interface <ifeth_trans> transceiver fex-fabric [ calibrations | details ] [ __readonly__ TABLE_interface <interface> <sfp> <name> <partnum> <rev> <serialnum> <nom_bitrate> <len_50> <len_625> <ciscoid> <ciscoid_1> [ <temp_slope> ] [ <temp_offset> ] [ <volt_slope> ] [ <volt_offset> ] [ <curr_slope> ] [ <curr_offset> ] [ <tx_pwr_slope> ] [ <tx_pwr_offset> ] [ <rx_pwr_4> ] [ <rx_pwr_3> ] [ <rx_pwr_2> ] [ <rx_pwr_1> ] [ <rx_pwr_0> ] ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_trans

Enter interface type and number in module/slot format

transceiver

Show interface transceiver information

fex-fabric

Show FEX interface transceiver information

calibrations

(Optional) Show interface transceiver calibration information

details

(Optional) Show interface transceiver detail information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

sfp

(Optional) sfp

name

(Optional) Name

partnum

(Optional) part number

rev

(Optional) revision

serialnum

(Optional) serial number

nom_bitrate

(Optional) Nominal bit rate in MBits/sec

len_50

(Optional) Link length supported for 50/125mm fiber

len_625

(Optional) Link length supported for 62.5/125mm fiber

ciscoid

(Optional) Cisco extended id

ciscoid_1

(Optional) Cisco extended id number

temp_slope

(Optional) Temperature slope

temp_offset

(Optional) Temperature offset

volt_slope

(Optional) Voltage slope

volt_offset

(Optional) Voltage offset

curr_slope

(Optional) Current slope

curr_offset

(Optional) Current offset

tx_pwr_slope

(Optional) Tx power slope

tx_pwr_offset

(Optional) Tx power offset

rx_pwr_4

(Optional) Rx power 4

rx_pwr_3

(Optional) Rx power 3

rx_pwr_2

(Optional) Rx power 2

rx_pwr_1

(Optional) Rx power 1

rx_pwr_0

(Optional) Rx power 0

Command Mode

- /exec

show interface trunk

show interface trunk [ module <module> | vlan <vlan_id> | fex <fex_num> ] [ __readonly__ { TABLE_interface <interface> <native> <status> <portchannel> } { TABLE_allowed_vlans <interface> <allowedvlans> } { TABLE_errored_vlans <interface> <erroredvlans> } { TABLE_stp_forward <interface> <stpfwd_vlans> } { TABLE_fabricpath_vlans <interface> <fabricpath_vlans> } { TABLE_vtp_pruning <interface> <vtppruning_vlans> } ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

trunk

Show interface trunk information

module

(Optional) Limit display to interfaces on module

module

(Optional) Enter module number

fex

(Optional) Limit display to interfaces on a FEX

fex_num

(Optional) Enter FEX number

vlan

(Optional) Show per vlan information for trunk

vlan_id

(Optional) Enter vlan range

interface

(Optional) Interface index

__readonly__

(Optional) Read Only

TABLE_interface

(Optional) show interface

TABLE_allowed_vlans

(Optional) show allowed vlans

TABLE_errored_vlans

(Optional) show errored vlans

TABLE_stp_forward

(Optional) show STP forwarding VLANs

TABLE_fabricpath_vlans

(Optional) show fabricpath VLANs

TABLE_vtp_pruning

(Optional) show VTP pruning VLANs

status

(Optional) Status

native

(Optional) Native VLAN

portchannel

(Optional) Port Channel

allowedvlans

(Optional) VLANs allowed and active in management domain

erroredvlans

(Optional) Errored VLANs

stpfwd_vlans

(Optional) STP Forwarding VLANs

fabricpath_vlans

(Optional) FabricPath VLANs

vtppruning_vlans

(Optional) VTP Pruning VLANs

Command Mode

- /exec

show interface trunk

show interface <ifeth_trnk> trunk [ __readonly__ { TABLE_interface <interface> <native> <status> <portchannel> } { TABLE_allowed_vlans <interface> <allowedvlans> } { TABLE_errored_vlans <interface> <erroredvlans> } { TABLE_stp_forward <interface> <stpfwd_vlans> } { TABLE_fabricpath_vlans <interface> <fabricpath_vlans> } { TABLE_vtp_pruning <interface> <vtppruning_vlans> } ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

ifeth_trnk

Enter interface type and number in module/slot format

trunk

Show interface trunk information

__readonly__

(Optional) Read Only

interface

(Optional) Interface index

TABLE_interface

(Optional) show interface

TABLE_allowed_vlans

(Optional) show allowed vlans

TABLE_errored_vlans

(Optional) show errored vlans

TABLE_stp_forward

(Optional) show STP forwarding VLANs

TABLE_fabricpath_vlans

(Optional) show fabricpath VLANs

TABLE_vtp_pruning

(Optional) show VTP pruning VLANs

status

(Optional) Status

native

(Optional) Native VLAN

portchannel

(Optional) Port Channel

allowedvlans

(Optional) VLANs allowed and active in management domain

erroredvlans

(Optional) Errored VLANs

stpfwd_vlans

(Optional) STP Forwarding VLANs

fabricpath_vlans

(Optional) FabricPath VLANs

vtppruning_vlans

(Optional) VTP Pruning VLANs

Command Mode

- /exec

show interface untagged-cos

show interface untagged-cos [ module <mod_num> ] [ __readonly__ <interface> <ucos-value> ]

Syntax Description

Syntax Description

show

Show running system information

interface

Show interface status and information

untagged-cos

Show interface untagged CoS information

module

(Optional) Limit display to interfaces on module

mod_num

(Optional) Enter module number

__readonly__

(Optional)

interface

(Optional) Interface index

ucos-value

(Optional) COS value

Command Mode

- /exec

show inventory

show inventory [ chassis | fans | power_supply | module [ <module> ] | <s0> [ <santa-cruz-range> ] | all ] [ __readonly__ TABLE_inv <name> <desc> <productid> <vendorid> <serialnum> ]

Syntax Description

Syntax Description

show

Show running system information

inventory

system inventory information

chassis

(Optional) system inventory chassis information

fans

(Optional) system inventory fan information

power_supply

(Optional) system inventory power supply information

module

(Optional) system inventory module information

module

(Optional) please enter the module number

s0

(Optional) please enter the module number

santa-cruz-range

(Optional) please enter the xbar number

all

(Optional) system and transceiver inventory information

__readonly__

(Optional)

TABLE_inv

(Optional) Inventory table

name

(Optional) Name of inventory

desc

(Optional) Description of inventory

productid

(Optional) Product ID

vendorid

(Optional) Vendor ID

serialnum

(Optional) Serial Number

Command Mode

- /exec

show ip adjacency

show ip adjacency [ <interface> [ summary ] | <ip-addr> [ non-best | detail ] | detail | summary | non-best | [ throttle ] statistics ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <invalid_pkt_cnt> ] [ <invalid_byte_cnt> ] [ <global_drop_pkt_cnt> ] [ <global_drop_byte_cnt> ] [ <global_punt_pkt_cnt> ] [ <global_punt_byte_cnt> ] [ <global_glean_pkt_cnt> ] [ <global_glean_byte_cnt> ] [ <glean_pkt_cnt> ] [ <glean_byte_cnt> ] [ <normal_pkt_cnt> ] [ <normal_byte_cnt> ] [ <last_updated> ] [ <count-static> ] [ <count-dynamic> ] [ <count-others> ] [ <count-throttle> ] [ <count-total> ] [ TABLE_vrf <vrf-name-out> [ TABLE_afi <afi> <count> [ TABLE_adj <intf-out> <ip-addr-out> [ <phy-intf> ] <mac> <pref> <owner> [ <pkt-count> ] [ <byte-count> ] [ <is-best> ] [ <is-thrtld> ] ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

adjacency

Display adjacency table

interface

(Optional) Display specific interface adjacencies only

ip-addr

(Optional) IPV4 source address

detail

(Optional) Show detail information of adjacency entries

summary

(Optional) Show adjacency summary

non-best

(Optional) Show both best/non-best entries

throttle

(Optional) Throttle

statistics

(Optional) Show adjacency statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Show adjacency entries for all vrfs

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

invalid_pkt_cnt

(Optional)

invalid_byte_cnt

(Optional)

global_drop_pkt_cnt

(Optional)

global_drop_byte_cnt

(Optional)

global_punt_pkt_cnt

(Optional)

global_punt_byte_cnt

(Optional)

global_glean_pkt_cnt

(Optional)

global_glean_byte_cnt

(Optional)

glean_pkt_cnt

(Optional)

glean_byte_cnt

(Optional)

normal_pkt_cnt

(Optional)

normal_byte_cnt

(Optional)

last_updated

(Optional)

count-static

(Optional)

count-dynamic

(Optional)

count-others

(Optional)

count-throttle

(Optional)

count-total

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

count

(Optional)

TABLE_adj

(Optional)

intf-out

(Optional)

phy-intf

(Optional)

ip-addr-out

(Optional)

mac

(Optional)

pref

(Optional)

owner

(Optional)

pkt-count

(Optional)

byte-count

(Optional)

is-best

(Optional)

is-thrtld

(Optional)

Command Mode

- /exec

show ip amt internal pim-cache

show ip amt internal pim-cache [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

amt

AMT show commands

internal

Commands for internal use

pim-cache

Show PIM client cache

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show ip amt relay

show { ip | ipv6 } amt relay [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ TABLE_vrf <vrf> <tut> <ra> <nds> <ldn> <nts> <lrn> <lra> <lq> <uc> <rc4> <rc6> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

vrf

(Optional) Display information for VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

amt

AMT show commands

relay

Display status information about the AMT Relay

__readonly__

(Optional)

TABLE_vrf

(Optional)

tut

(Optional)

ra

(Optional)

vrf

(Optional)

nds

(Optional)

ldn

(Optional)

nts

(Optional)

lrn

(Optional)

lra

(Optional)

lq

(Optional)

uc

(Optional)

rc4

(Optional)

rc6

(Optional)

Command Mode

- /exec

show ip amt route

show { ip | ipv6 } amt route [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ TABLE_vrf <vrf> <rc4> <rc6> { TABLE_route <addrs> <if> <nbr> <gwa> <gw_exp> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

vrf

(Optional) Display information for VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

amt

AMT show commands

route

Display multicast routes learned via AMT

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

rc4

(Optional)

rc6

(Optional)

TABLE_route

(Optional)

addrs

(Optional)

if

(Optional)

nbr

(Optional)

gwa

(Optional)

gw_exp

(Optional)

Command Mode

- /exec

show ip amt tunnel

show ip amt tunnel [ <address4> <port> ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ TABLE_vrf <vrf> <tc4> { TABLE_tunnel <gwa> <gwp> <ut> <ld> <lr> <rc> <exp> { TABLE_route <source> <group> <rexp> } } ]

Syntax Description

Syntax Description

show

Show running system information

amt

AMT show commands

ip

Display IP information

tunnel

Display tunnel information

vrf

(Optional) Display information for VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

address4

(Optional) IP address of tunnel endpoint

port

(Optional) UDP port number of gateway

detail

(Optional) Display routes joined by tunnel endpoint

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

tc4

(Optional)

TABLE_tunnel

(Optional)

gwa

(Optional)

gwp

(Optional)

ut

(Optional)

ld

(Optional)

lr

(Optional)

rc

(Optional)

exp

(Optional)

TABLE_route

(Optional)

source

(Optional)

group

(Optional)

rexp

(Optional)

Command Mode

- /exec

show ip arp

show ip arp [ [ [ <ip-address> | [ sync-entries | fhrp-non-active-learn ] [ detail ] | static | summary | [ summary ] <interface> ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] ] [ __readonly__ TABLE_vrf <vrf-name-out> [ <cnt-resolved> ] [ <cnt-incomplete> ] [ <cnt-thrtld-incomplete> ] [ <cnt-unknown> ] [ <cnt-total> ] [ TABLE_adj <intf-out> <ip-addr-out> [ <time-stamp> ] <mac> [ <phy-intf> ] [ <unknown> ] [ <incomplete> ] [ <flags> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

summary

(Optional) Display ARP adjacency summary

detail

(Optional) Display detailed information

sync-entries

(Optional) Display ARP table learnt only due to arp table sync

fhrp-non-active-learn

(Optional) Display ARP table learnt only due to request for non-active FHRP address

interface

(Optional) ARP interface

ip-address

(Optional) IP address

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display ARP entries for all vrfs

static

(Optional) Display Static ARP entries

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

cnt-resolved

(Optional)

cnt-incomplete

(Optional)

cnt-thrtld-incomplete

(Optional)

cnt-unknown

(Optional)

cnt-total

(Optional)

TABLE_adj

(Optional)

intf-out

(Optional)

ip-addr-out

(Optional)

time-stamp

(Optional)

mac

(Optional)

phy-intf

(Optional)

unknown

(Optional)

incomplete

(Optional)

flags

(Optional)

Command Mode

- /exec

show ip arp anycast topo-info

show ip arp anycast topo-info [ <topo-id> ] [ __readonly__ { TABLE_ip_arp_anycast_topo_info [ <ip_arp_anycat_topo_id> ] [ <ip_arp_anycast_feature> ] [ <ip_arp_anycast_mode> ] } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Configure IP features

arp

Configure ARP parameters

anycast

anycast feature info

topo-info

Per topology specific information

topo-id

(Optional) Topology ID (VLAN-ID or BD-ID)

__readonly__

(Optional)

TABLE_ip_arp_anycast_topo_info

(Optional) Show ip arp anycast topo-info

ip_arp_anycat_topo_id

(Optional)

ip_arp_anycast_feature

(Optional)

ip_arp_anycast_mode

(Optional)

Command Mode

- /exec

show ip arp cache

show ip arp cache { { brief | detail } | { interface [ <intf> ] } } [ operational ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

arp

cache

Display ip arp cache

interface

Display ip arp related interface information

brief

Display summary of arp interface status and configuration

detail

Display detailed information of arp interface status and configuration

operational

(Optional) Display only interfaces that are administratively enabled

intf

(Optional) Interface name to display

Command Mode

- /exec

show ip arp client

show ip arp client [ __readonly__ { <arp-clients> } [ TABLE_arp_client_list { <arp-cli-uuid> <l2-client-type> <client-flg> <mts-addr-sap> <cli-msg-cnt> [ <l2-cli-func-name> ] [ <l2-cli-dbg-func> ] [ <l2-cli-dbg-un-init-func> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

client

Display ARP Client table

__readonly__

(Optional)

arp-clients

(Optional)

TABLE_arp_client_list

(Optional)

arp-cli-uuid

(Optional)

l2-client-type

(Optional)

client-flg

(Optional)

mts-addr-sap

(Optional)

cli-msg-cnt

(Optional)

l2-cli-func-name

(Optional)

l2-cli-dbg-func

(Optional)

l2-cli-dbg-un-init-func

(Optional)

Command Mode

- /exec

show ip arp controller-statistics

show ip arp controller-statistics [ __readonly__ { TABLE_ip_arp_controller_statistics [ <arp_adj_controller_add_count> ] [ <arp_adj_controller_del_count> ] [ <arp_adj_controller_add_err_count> ] [ <arp_adj_controller_del_err> ] } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

controller-statistics

Controller statistics

__readonly__

(Optional)

TABLE_ip_arp_controller_statistics

(Optional) Show controller-statistics

arp_adj_controller_add_count

(Optional)

arp_adj_controller_del_count

(Optional)

arp_adj_controller_add_err_count

(Optional)

arp_adj_controller_del_err

(Optional)

Command Mode

- /exec

show ip arp esi

show ip arp esi [ __readonly__ { TABLE_ip_arp_esi [ <ip_arp_esi_interface> ] [ <ip_arp_esi_value> ] } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Configure IP features

arp

Configure ARP parameters

esi

ESI information

__readonly__

(Optional)

TABLE_ip_arp_esi

(Optional) Show ip arp esi

ip_arp_esi_interface

(Optional)

ip_arp_esi_value

(Optional)

Command Mode

- /exec

show ip arp inspection

show ip arp inspection [ __readonly__ <src_mac_valid> <dest_mac_valid> <ip_addr_valid> TABLE_entry <active_vlan_id> <is_insp_enabled> <oper_state> <acl_name> <is_static_acl> <acl_logging> <dhcp_logging> <req_fwded> <res_fwded> <req_dropped> <res_dropped> <dhcp_drops> <acl_drops> <dhcp_permits> <acl_permits> <req_smac_fails> <res_smac_fails> <res_dmac_fails> <req_ip_fails> <res_ip_fails> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Show the IP features of the system

arp

IP ARP table

inspection

Status of ARP Inspection

__readonly__

(Optional)

src_mac_valid

(Optional)

dest_mac_valid

(Optional)

ip_addr_valid

(Optional)

TABLE_entry

(Optional)

active_vlan_id

(Optional)

is_insp_enabled

(Optional)

oper_state

(Optional)

acl_name

(Optional)

is_static_acl

(Optional)

acl_logging

(Optional)

dhcp_logging

(Optional)

Command Mode

- /exec

show ip arp inspection interfaces

show ip arp inspection interfaces [ <intf1> ] [ __readonly__ TABLE_intf <intf_header> <intf2> <trust_state> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Show the IP features of the system

arp

IP ARP table

inspection

Status of ARP Inspection

interfaces

Trust status of all interfaces

intf1

(Optional) interface

__readonly__

(Optional)

TABLE_intf

(Optional)

intf_header

(Optional)

intf2

(Optional)

trust_state

(Optional)

Command Mode

- /exec

show ip arp inspection log

show ip arp inspection log [ __readonly__ <log_buff_size> <log_rate_entries> <log_rate_interval> <log_frame> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Show the IP features of the system

arp

IP ARP table

inspection

Status of ARP Inspection

log

Log Buffer

__readonly__

(Optional)

log_buff_size

(Optional)

log_rate_entries

(Optional)

log_rate_interval

(Optional)

log_frame

(Optional)

Command Mode

- /exec

show ip arp inspection statistics

show ip arp inspection statistics [ vlan <vlan-range> ] [ __readonly__ TABLE_stats <vlanid> <req_fwded> <res_fwded> <req_dropped> <res_dropped> <dhcp_drops> [ <acl_drops> ] <dhcp_permits> [ <acl_permits> ] <req_smac_fails> <res_smac_fails> <res_dmac_fails> <req_ip_fails> <res_ip_fails> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Show the IP features of the system

arp

IP ARP table

inspection

Status of ARP Inspection

statistics

Status of ARP Inspection

vlan

(Optional) Selected vlan range

vlan-range

(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

__readonly__

(Optional)

TABLE_stats

(Optional)

vlanid

(Optional)

Command Mode

- /exec

show ip arp inspection vlan

show ip arp inspection vlan <vlan-range> [ __readonly__ <src_mac_valid> <dest_mac_valid> <ip_addr_valid> TABLE_vlan <active_vlan_id> <is_insp_enabled> <oper_state> <acl_name> <is_static_acl> <acl_logging> <dhcp_logging> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Show the IP features of the system

arp

IP ARP table

inspection

Status of ARP Inspection

vlan

Selected vlan range

vlan-range

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

__readonly__

(Optional)

src_mac_valid

(Optional)

dest_mac_valid

(Optional)

ip_addr_valid

(Optional)

TABLE_vlan

(Optional)

active_vlan_id

(Optional)

is_insp_enabled

(Optional)

oper_state

(Optional)

acl_name

(Optional)

is_static_acl

(Optional)

acl_logging

(Optional)

dhcp_logging

(Optional)

Command Mode

- /exec

show ip arp internal buffers

show ip arp internal buffers [ { [ all <count> ] [ free <count> ] } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

internal

Commands for internal use

buffers

Display detailed buffer statistics

all

(Optional) Dump buffers from ALL list

free

(Optional) Dump buffers from FREE list

count

(Optional) Number of buffers to dump

Command Mode

- /exec

show ip arp internal event-history

show ip arp internal event-history { packet | errors | msgs | event | sync-event | ip-sync-event | control | ha | lcache | lcache-errors | cli | client-event | client-errors | snmp | suppression-event | suppression-errors | controller-errors | dme-event }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

internal

Display internal arp information

event-history

Show various event logs of ARP

packet

Show various packet logs of ARP

errors

Show error logs of ARP

msgs

Show various message logs of ARP

event

Show various event logs of ARP

sync-event

Show various CFS and MCECM related event logs of ARP

ip-sync-event

Show various L3 over vpc related event logs of ARP

control

Show various control event logs of ARP

ha

Show various ha logs of ARP

lcache

Show various lcache logs of ARP

lcache-errors

Show various lcache-error logs of ARP

cli

Show CLI related events of ARP

client-event

Show various event logs of ARP clients

client-errors

Show error logs of ARP clients

snmp

Show SNMP logs

suppression-event

ARP suppression event logs

suppression-errors

ARP suppression error logs

controller-errors

Controller MAC-IP route error logs

dme-event

ARP DME Event logs

Command Mode

- /exec

show ip arp internal event-history buffer-size

show ip arp internal event-history buffer-size { packet | errors | event | sync-event | ip-sync-event | control | ha | lcache | lcache-errors | cli | client-event | client-errors | snmp | suppression-event | suppression-errors | controller-errors | dme-event | all }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

internal

Display internal arp information

event-history

Show various event logs of ARP

buffer-size

Show current size of the buffers

packet

Show packet logs buffer size of ARP

errors

Show error logs buffer size of ARP

event

Show event logs buffer size of ARP

sync-event

Show CFS and MCECM related event logs buffer size of ARP

ip-sync-event

Show various L3 over vpc related event logs buffer size of ARP

control

Show ARP control event logs buffer size

ha

Show ha logs buffer size of ARP

lcache

Show lcache logs buffer size of ARP

lcache-errors

Show lcache-error logs buffer size of ARP

cli

Show CLI related events buffer size of ARP

client-event

Show event logs buffer size of ARP clients

client-errors

Show error logs buffer size of ARP clients

snmp

Show SNMP logs buffer size

suppression-event

ARP suppression event logs

suppression-errors

ARP suppression error logs

controller-errors

Controller MAC-IP route error logs

dme-event

ARP DME event logs

all

Show the sizes of all the buffers

Command Mode

- /exec

show ip arp internal hmm statistics

show ip arp internal hmm statistics [ detail ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

internal

Commands for internal use

hmm

Display local HMM information

statistics

Local HMM statistics

detail

(Optional) Detailed HMM statistics

Command Mode

- /exec

show ip arp internal info

show ip arp internal info [ interface <interface> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

internal

Commands for internal use

info

Commands for internal use

interface

(Optional) Interface filter

interface

(Optional) ARP interface

Command Mode

- /exec

show ip arp internal library

show ip arp internal { library-info | fastboot-cache }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

internal

Commands for internal use

library-info

Show various event logs of library

fastboot-cache

Show ARP cache for fastboot recovery

Command Mode

- /exec

show ip arp internal mem

show ip arp internal { mem-stats [ shared | all ] [ no-libs ] [ detail ] }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

internal

Display internal arp information

mem-stats

Show memory allocation statistics

shared

(Optional) Display shared memory statistics

all

(Optional) Display private and shared memory statistics

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

Command Mode

- /exec

show ip arp multihoming-statistics

show ip arp multihoming-statistics [ <interface> ] [ interface-all ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name-out2> TABLE_stat <ps-recv-add-l2rib> <ps-recv-del-l2rib> <ps-recv-remote-upd-l2rib> <ps-recv-pc-shut-l2rib> <ps-proc-add-l2rib> <ps-proc-del-l2rib> <ps-proc-remote-upd-l2rib> <ps-proc-pc-shut-l2rib> <ps-add-err-invalid-flags> <ps-del-err-invalid-flags> <ps-add-err-invalid-curr-state> <ps-del-err-invalid-curr-state> <ps-del-err-mac-mismatch> <ps-del-err-tl-route> <tl-del-err-psro-route> <ps-del-err-sec-del> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

multihoming-statistics

Display ARP Multihoming stats

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display ARP Multihoming statistics for all vrfs

interface-all

(Optional) Display ARP Multihoming statistics for all interface

interface

(Optional) ARP interface

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out2

(Optional)

TABLE_stat

(Optional)

ps-recv-add-l2rib

(Optional)

ps-recv-del-l2rib

(Optional)

ps-recv-remote-upd-l2rib

(Optional)

ps-recv-pc-shut-l2rib

(Optional)

ps-proc-add-l2rib

(Optional)

ps-proc-del-l2rib

(Optional)

ps-proc-remote-upd-l2rib

(Optional)

ps-proc-pc-shut-l2rib

(Optional)

ps-add-err-invalid-flags

(Optional)

ps-del-err-invalid-flags

(Optional)

ps-add-err-invalid-curr-state

(Optional)

ps-del-err-invalid-curr-state

(Optional)

ps-del-err-mac-mismatch

(Optional)

ps-del-err-tl-route

(Optional)

tl-del-err-psro-route

(Optional)

ps-del-err-sec-del

(Optional)

Command Mode

- /exec

show ip arp off-list

show ip arp off-list [ { vlan | bdi } <vlan-id> ] [ __readonly__ [ <offlist-vlan-id> <vlan-adj-cnt> ] [ <arp-sync-adj-cnt> ] { TABLE_arp_vlan_list <adj-vlan-id> <off-adj-ip-addr> <time-stamp> <arp-mac-addr> <off-adj-flags> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

off-list

Show adjacencies in off-list arp database

vlan

(Optional) Vlan id

bdi

(Optional) Bridge Domain Name/Id

vlan-id

(Optional) Show information for specified vlan

__readonly__

(Optional)

offlist-vlan-id

(Optional)

vlan-adj-cnt

(Optional)

arp-sync-adj-cnt

(Optional)

TABLE_arp_vlan_list

(Optional)

adj-vlan-id

(Optional)

off-adj-ip-addr

(Optional)

time-stamp

(Optional)

arp-mac-addr

(Optional)

off-adj-flags

(Optional)

Command Mode

- /exec

show ip arp open-flow error-statistics

show ip arp open-flow error-statistics [ __readonly__ { TABLE_ip_arp_open_flow_error_statistics [ <arp_ofa_total_err_cnt> ] [ <arp_ofa_dp_adj_err_on_del> ] [ <arp_ofa_cp_mac_mismatch_err_on_del> ] [ <arp_ofa_cp_null_mac_err_on_del> ] [ <arp_ofa_cp_no_adj_err_on_del_flag> ] [ <arp_ofa_cp_cp_nh_mismatch_err_on_del> ] [ <arp_ofa_cp_adj_del_failure_err> ] [ <arp_ofa_cp_null_mac_err_on_add> ] [ <arp_ofa_cp_dp_mac_mismatch_err_on_add> ] [ <arp_ofa_cp_cp_mac_mismatch_err_on_add> ] [ <arp_ofa_cp_added_first_err> ] [ <arp_ofa_dp_overwrite_cp_err> ] [ <arp_ofa_dp_cp_nh_mismatch_err_on_add> ] [ <arp_ofa_cp_cp_nh_mismatch_err_on_add> ] [ <arp_ofa_cp_dp_nh_mismatch_err_on_add> ] [ <arp_ofa_cp_adj_add_failure_err> ] [ <arp_ofa_barrier_response_err> ] } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Configure IP features

arp

Configure ARP parameters

open-flow

open flow

error-statistics

IR mode specific adjacency statistics

__readonly__

(Optional)

TABLE_ip_arp_open_flow_error_statistics

(Optional) Arp OFA stats

arp_ofa_total_err_cnt

(Optional)

arp_ofa_dp_adj_err_on_del

(Optional)

arp_ofa_cp_mac_mismatch_err_on_del

(Optional)

arp_ofa_cp_null_mac_err_on_del

(Optional)

arp_ofa_cp_no_adj_err_on_del_flag

(Optional)

arp_ofa_cp_cp_nh_mismatch_err_on_del

(Optional)

arp_ofa_cp_adj_del_failure_err

(Optional)

arp_ofa_cp_null_mac_err_on_add

(Optional)

arp_ofa_cp_dp_mac_mismatch_err_on_add

(Optional)

arp_ofa_cp_cp_mac_mismatch_err_on_add

(Optional)

arp_ofa_cp_added_first_err

(Optional)

arp_ofa_dp_overwrite_cp_err

(Optional)

arp_ofa_dp_cp_nh_mismatch_err_on_add

(Optional)

arp_ofa_cp_cp_nh_mismatch_err_on_add

(Optional)

arp_ofa_cp_dp_nh_mismatch_err_on_add

(Optional)

arp_ofa_cp_adj_add_failure_err

(Optional)

arp_ofa_barrier_response_err

(Optional)

Command Mode

- /exec

show ip arp snmp pttree

show ip arp snmp pttree { static | dynamic | virtual | typeall } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

snmp

Show only snmp pttree

pttree

Patricia tree

static

show only static adjacencies in pt tree

dynamic

show only dynamic adjacencies in pt tree

virtual

show only virtual adjacencies in pt tree

typeall

show all adjacencies in pt tree

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display ARP statistics for all vrfs

Command Mode

- /exec

show ip arp statistics

show ip arp statistics [ <interface> ] [ interface-all ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name-out1> TABLE_stat <tx-total> <tx-req> <tx-reply> <tx-req-l2> <tx-reply-l2> <tx-grat> <tx-tunnel> <tx-drop> <tx-srvrport> <tx-fbrcport> <tx-fixup-core> <tx-fixup-server> <tx-fixup-rarp> <tx-anycast-glean> <tx-mbuf-fail> <tx-ctxt-not-crtd> <tx-bad-ctxt-id> <tx-invalid-ifindex> <tx-invalid-sip> <tx-invalid-dip> <tx-own-ip> <tx-unattached-ip> <tx-adj-create-fail> <tx-null-sip> <tx-null-smac> <tx-client-enq-fail> <tx-dest-unreachable-proxy-arp> <tx-dest-unreachable-enhanced-proxy> <tx-dest-l2port-track> <tx-invalid-local-proxy> <tx-invalid-proxy> <tx-vip-not-active> <tx-multiple-vip-for-proxy> <rx-total> <rx-req> <rx-reply> <rx-req-l2> <rx-reply-l2> <rx-proxy> <rx-local-proxy> <rx-enhanced-proxy> <rx-enhanced-proxy-anycast> <rx-enhanced-proxy-l2port-track> <rx-tunnel> <rx-fastpath> <rx-snoop> <rx-drop> <rx-srvrport> <bad-if> <bad-len> <invalid-prot> <invalid-hrd-type> <invalid-ctxt> <ctxt-not-crtd> <invalid-l2> <invalid-l3> <invalid-sip> <our-sip> <arp-if-no-mem> <subnet-mismatch> <dir-bcast> <invalid-dip> <non-local-dst> <non-active-fhrp> <invalid-smac> <our-smac> <not-init> <l2-prxy-en> <l2-port-untrusted> <stdby-fhrp-vip> <grat-prxy-en> <arp-req-ignore> <l2-intf> <l2fm-query-fail> <tunnel_fail> <hsrp-active-vmac> <rx-intf-down> <adds> <dels> <timeouts> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

statistics

Display ARP statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display ARP statistics for all vrfs

interface-all

(Optional) Display ARP statistics for all interface

interface

(Optional) ARP interface

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out1

(Optional)

TABLE_stat

(Optional)

tx-total

(Optional)

tx-req

(Optional)

tx-reply

(Optional)

tx-req-l2

(Optional)

tx-reply-l2

(Optional)

tx-grat

(Optional)

tx-tunnel

(Optional)

tx-drop

(Optional)

tx-srvrport

(Optional)

tx-fbrcport

(Optional)

tx-fixup-core

(Optional)

tx-fixup-server

(Optional)

tx-fixup-rarp

(Optional)

tx-anycast-glean

(Optional)

tx-mbuf-fail

(Optional)

tx-ctxt-not-crtd

(Optional)

tx-bad-ctxt-id

(Optional)

tx-invalid-ifindex

(Optional)

tx-invalid-sip

(Optional)

tx-invalid-dip

(Optional)

tx-own-ip

(Optional)

tx-unattached-ip

(Optional)

tx-adj-create-fail

(Optional)

tx-null-sip

(Optional)

tx-null-smac

(Optional)

tx-client-enq-fail

(Optional)

tx-dest-unreachable-proxy-arp

(Optional)

tx-dest-unreachable-enhanced-proxy

(Optional)

tx-dest-l2port-track

(Optional)

tx-invalid-local-proxy

(Optional)

tx-invalid-proxy

(Optional)

tx-vip-not-active

(Optional)

tx-multiple-vip-for-proxy

(Optional)

rx-total

(Optional)

rx-req

(Optional)

rx-reply

(Optional)

rx-req-l2

(Optional)

rx-reply-l2

(Optional)

rx-proxy

(Optional)

rx-local-proxy

(Optional)

rx-enhanced-proxy

(Optional)

rx-enhanced-proxy-anycast

(Optional)

rx-enhanced-proxy-l2port-track

(Optional)

rx-tunnel

(Optional)

rx-fastpath

(Optional)

rx-snoop

(Optional)

rx-drop

(Optional)

rx-srvrport

(Optional)

bad-if

(Optional)

bad-len

(Optional)

invalid-prot

(Optional)

invalid-hrd-type

(Optional)

invalid-ctxt

(Optional)

ctxt-not-crtd

(Optional)

invalid-l2

(Optional)

invalid-l3

(Optional)

invalid-sip

(Optional)

our-sip

(Optional)

arp-if-no-mem

(Optional)

subnet-mismatch

(Optional)

dir-bcast

(Optional)

invalid-dip

(Optional)

non-local-dst

(Optional)

non-active-fhrp

(Optional)

invalid-smac

(Optional)

our-smac

(Optional)

not-init

(Optional)

l2-prxy-en

(Optional)

l2-port-untrusted

(Optional)

stdby-fhrp-vip

(Optional)

grat-prxy-en

(Optional)

arp-req-ignore

(Optional)

l2-intf

(Optional)

l2fm-query-fail

(Optional)

tunnel_fail

(Optional)

hsrp-active-vmac

(Optional)

rx-intf-down

(Optional)

adds

(Optional)

dels

(Optional)

timeouts

(Optional)

Command Mode

- /exec

show ip arp suppression-cache

show ip arp suppression-cache { detail [ vlan <vlan_id> ] | summary | statistics | vlan <vlan_id> | local [ vlan <vlan_id> ] | remote [ vlan <vlan_id> ] } [ __readonly__ TABLE_arp-suppression [ TABLE_entries <ip-addr> <age> <mac> <vlan> <physical-iod> <flag> ] [ TABLE_summary <remote-count> <synced-count> <local-count> <total-count> ] [ TABLE_stats TABLE_suppressed <total> <requests> <gratuitous> <requests-on-l2> <gratuitous-on-l2> TABLE_sent <total-sent> <requests-sent> <replies-sent> <requests-on-core-sent> <replies-on-core-sent> <dropped-sent> <requests-on-l2-sent> <replies-on-l2-sent> <requests-on-core-l2-sent> <replies-on-core-l2-sent> <dropped-l2-sent> TABLE_received <total-recv> <requests-recv> <replies-recv> <requests-on-l2-recv> <replies-on-l2-recv> <gratuitous-recv> <dropped-recv> <gratuitous-l2-recv> <dropped-l2-recv> <local-requests-recv> <local-replies-recv> TABLE_entrystats <adds> <dels> ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

suppression-cache

arp-suppression-cache

detail

show details

summary

show summary

statistics

show statistics

local

show local entries

remote

show remote entries

vlan

(Optional) L2vlan

vlan_id

(Optional) Vlan

__readonly__

(Optional)

TABLE_arp-suppression

(Optional)

TABLE_entries

(Optional)

ip-addr

(Optional)

age

(Optional)

mac

(Optional)

vlan

(Optional)

physical-iod

(Optional)

flag

(Optional)

TABLE_summary

(Optional)

remote-count

(Optional)

synced-count

(Optional)

local-count

(Optional)

total-count

(Optional)

TABLE_stats

(Optional)

TABLE_suppressed

(Optional)

total

(Optional)

requests

(Optional)

requests-on-l2

(Optional)

gratuitous

(Optional)

gratuitous-on-l2

(Optional)

TABLE_sent

(Optional)

total-sent

(Optional)

requests-sent

(Optional)

replies-sent

(Optional)

requests-on-core-sent

(Optional)

replies-on-core-sent

(Optional)

dropped-sent

(Optional)

requests-on-l2-sent

(Optional)

replies-on-l2-sent

(Optional)

requests-on-core-l2-sent

(Optional)

replies-on-core-l2-sent

(Optional)

dropped-l2-sent

(Optional)

TABLE_received

(Optional)

total-recv

(Optional)

requests-recv

(Optional)

local-requests-recv

(Optional)

replies-recv

(Optional)

local-replies-recv

(Optional)

gratuitous-recv

(Optional)

dropped-recv

(Optional)

requests-on-l2-recv

(Optional)

replies-on-l2-recv

(Optional)

gratuitous-l2-recv

(Optional)

dropped-l2-recv

(Optional)

TABLE_entrystats

(Optional)

adds

(Optional)

dels

(Optional)

Command Mode

- /exec

show ip arp suppression topo-info

show ip arp suppression topo-info [ <topo-id> ] [ __readonly__ { TABLE_ip_arp_suppression_topo_info [ <ip_arp_suppression_topo_id> ] [ <ip_arp_suppression_mode> ] } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Configure IP features

arp

Configure ARP parameters

suppression

ARP-suppression based event

topo-info

E-VPN identifier

topo-id

(Optional) E-VPN identifier (VLAN-ID or BD-ID)

__readonly__

(Optional)

TABLE_ip_arp_suppression_topo_info

(Optional) Show suppression topo-info

ip_arp_suppression_topo_id

(Optional)

ip_arp_suppression_mode

(Optional)

Command Mode

- /exec

show ip arp tunnel-statistics

show ip arp tunnel-statistics [ __readonly__ { TABLE_ip_arp_tunnel_stat [ <arp-tun-pkt-rcv-cnt> ] [ <arp-tun-pkt-rcv-ing-vpc> ] [ <arp-tun-pkt-rcv-ing-gpc> ] [ <arp-tun-pkt-rcv-ing-orp-vpc> ] [ <arp-tun-pkt-rcv-ing-orp-vpc-pl> ] [ <arp-tun-pkt-snd-cnt> ] [ <arp-tun-pkt-snd-snoop-cnt> ] [ <arp-tun-pkt-snd-non-local-vip-cnt> ] [ <arp-tun-pkt-snd-peer-gate-cnt> ] [ <arp-tun-pkt-snd-ing-vpc> ] [ <arp-tun-pkt-snd-ing-gpc> ] [ <arp-tun-pkt-snd-ing-orp-vpc> ] [ <arp-tun-pkt-snd-ing-orp-vpc-pl> ] [ <arp-tun-pkt-rcv-drp-cnt> ] [ <arp-tun-pkt-snd-drp-cnt> ] [ <arp-tun-pkt-snd-drp-snd-fail-cnt> ] [ <arp-tun-pkt-rcv-drp-ver-cnt> ] [ <arp-tun-pkt-rcv-drp-pl-cnt> ] [ <arp-tun-pkt-rcv-drp-ing-non-mct> ] [ <arp-tun-pkt-rcv-drp-inv-ing-intf> ] [ <arp-tun-pkt-snd-drp-inv-ing-intf> ] [ <arp-tun-pkt-rcvdrp-inv-gpc-core-sw> ] [ <arp-tun-pkt-rcvdrp-inv-gpc-peer-sw> ] [ <arp-tun-pkt-drp-inv-mcec> ] [ <arp-tun-pkt-im-api-fail> ] [ <arp-tun-pkt-drp-ctxt-inv> ] [ <arp-tun-pkt-drp-mct-dwn> ] [ <arp-tun-pkt-rcv-drp-mbuf-op-fail> ] [ <arp-tun-pkt-snd-drp-mbuf-op-fail> ] [ <arp-tun-pkt-snd-drp-tunnel> ] [ <arp-tun-pkt-snd-drp-ce> ] [ <arp-tun-pkt-snd-drp-inv-gpc> ] [ <arp-tun-pkt-rcv-drp-inv-gpc> ] [ <arp-tun-pkt-sys-mcecm-key-not-found> ] } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

tunnel-statistics

Display ARP statistics for tunneled packets

__readonly__

(Optional)

TABLE_ip_arp_tunnel_stat

(Optional) ARP Tunnel stats

arp-tun-pkt-rcv-cnt

(Optional)

arp-tun-pkt-rcv-ing-vpc

(Optional)

arp-tun-pkt-rcv-ing-gpc

(Optional)

arp-tun-pkt-rcv-ing-orp-vpc

(Optional)

arp-tun-pkt-rcv-ing-orp-vpc-pl

(Optional)

arp-tun-pkt-snd-cnt

(Optional)

arp-tun-pkt-snd-snoop-cnt

(Optional)

arp-tun-pkt-snd-non-local-vip-cnt

(Optional)

arp-tun-pkt-snd-peer-gate-cnt

(Optional)

arp-tun-pkt-snd-ing-vpc

(Optional)

arp-tun-pkt-snd-ing-gpc

(Optional)

arp-tun-pkt-snd-ing-orp-vpc

(Optional)

arp-tun-pkt-snd-ing-orp-vpc-pl

(Optional)

arp-tun-pkt-rcv-drp-cnt

(Optional)

arp-tun-pkt-snd-drp-cnt

(Optional)

arp-tun-pkt-snd-drp-snd-fail-cnt

(Optional)

arp-tun-pkt-rcv-drp-ver-cnt

(Optional)

arp-tun-pkt-rcv-drp-pl-cnt

(Optional)

arp-tun-pkt-rcv-drp-ing-non-mct

(Optional)

arp-tun-pkt-rcv-drp-inv-ing-intf

(Optional)

arp-tun-pkt-snd-drp-inv-ing-intf

(Optional)

arp-tun-pkt-rcvdrp-inv-gpc-core-sw

(Optional)

arp-tun-pkt-rcvdrp-inv-gpc-peer-sw

(Optional)

arp-tun-pkt-drp-inv-mcec

(Optional)

arp-tun-pkt-im-api-fail

(Optional)

arp-tun-pkt-drp-ctxt-inv

(Optional)

arp-tun-pkt-drp-mct-dwn

(Optional)

arp-tun-pkt-rcv-drp-mbuf-op-fail

(Optional)

arp-tun-pkt-snd-drp-mbuf-op-fail

(Optional)

arp-tun-pkt-snd-drp-tunnel

(Optional)

arp-tun-pkt-snd-drp-ce

(Optional)

arp-tun-pkt-snd-drp-inv-gpc

(Optional)

arp-tun-pkt-rcv-drp-inv-gpc

(Optional)

arp-tun-pkt-sys-mcecm-key-not-found

(Optional)

Command Mode

- /exec

show ip arp vaddr

show ip arp vaddr

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

vaddr

Display VADDR ARP table

Command Mode

- /exec

show ip arp vpc-statistics

show ip arp vpc-statistics [ __readonly__ { TABLE_arp_vpc_stats [ <arp-pro-drp-pull-disable> ] [ <arp-pro-drp-push-msg-disable> ] [ <arp-pro-ign-snd-pull-disabe> ] [ <arp-ign-snd-push-disable> ] [ <arp-drp-im-fail> ] [ <arp-drp-mcecm-fail> ] [ <arp-drp-invalid-pc-iod> ] [ <arp-drp-pt-lookup-fail> ] [ <arp-drp-resp-fail-no-mct> ] [ <arp-drp-resp-fail> ] [ <arp-resp-sent> ] [ <arp-resp-recvd> ] [ <arp-resp-recv-err> ] [ <arp-rcvd-msg> ] [ <arp-send-fail> ] [ <arp-cfs-rel-dlvry-fail> ] [ <arp-cfs-rel-dnvry-suc> ] [ <arp-drp-pt-add-fail> ] [ <arp-drp-no-mem> ] [ <arp-drp-tmr-cre-fail> ] [ <arp-drp-add-adj-fail> ] [ <arp-off-drp-pt-lookup-fail> ] [ <arp-dont-drp-vlan-mismat> ] [ <arp-drp-svi-invalid> ] [ <arp-dont-drop-sv-down> ] [ <arp-drp-mct-down> ] [ <arp-drp-ctxt-invalid> ] [ <arp-drp-vrf-invalid> ] [ <arp-drp-l3addr-invalid> ] [ <arp-drp-l3addr-sanity-fail> ] [ <arp-drp-mac-sanity-fail> ] [ <arp-own-rtr-mac> ] [ <arp-drp-own-ipaddr> ] [ <arp-drp-own-vipadd> ] [ <arp-drp-adj-fail> ] [ <arp-drp-subnet-mismatch> ] [ <arp-drp-adj-exist> ] [ <arp-dont-drp-ip-not-enable> ] [ <arp-drp-inval-phy-iod> ] [ <arp-drp-total-cnt> ] [ <arp-dont-drop-total-cnt> ] [ <arp-add-adj> ] [ <arp-del-adj> ] [ <arp-adj-already-exist> ] } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

arp

Display ARP table and statistics

vpc-statistics

Show vPC global statistics

__readonly__

(Optional)

TABLE_arp_vpc_stats

(Optional) Arp Vpc statistics

arp-pro-drp-pull-disable

(Optional)

arp-pro-drp-push-msg-disable

(Optional)

arp-pro-ign-snd-pull-disabe

(Optional)

arp-ign-snd-push-disable

(Optional)

arp-drp-im-fail

(Optional)

arp-drp-mcecm-fail

(Optional)

arp-drp-invalid-pc-iod

(Optional)

arp-drp-pt-lookup-fail

(Optional)

arp-drp-resp-fail-no-mct

(Optional)

arp-drp-resp-fail

(Optional)

arp-resp-sent

(Optional)

arp-resp-recvd

(Optional)

arp-resp-recv-err

(Optional)

arp-rcvd-msg

(Optional)

arp-send-fail

(Optional)

arp-cfs-rel-dlvry-fail

(Optional)

arp-cfs-rel-dnvry-suc

(Optional)

arp-drp-pt-add-fail

(Optional)

arp-drp-no-mem

(Optional)

arp-drp-tmr-cre-fail

(Optional)

arp-drp-add-adj-fail

(Optional)

arp-off-drp-pt-lookup-fail

(Optional)

arp-dont-drp-vlan-mismat

(Optional)

arp-drp-svi-invalid

(Optional)

arp-dont-drop-sv-down

(Optional)

arp-drp-mct-down

(Optional)

arp-drp-ctxt-invalid

(Optional)

arp-drp-vrf-invalid

(Optional)

arp-drp-l3addr-invalid

(Optional)

arp-drp-l3addr-sanity-fail

(Optional)

arp-drp-mac-sanity-fail

(Optional)

arp-own-rtr-mac

(Optional)

arp-drp-own-ipaddr

(Optional)

arp-drp-own-vipadd

(Optional)

arp-drp-adj-fail

(Optional)

arp-drp-subnet-mismatch

(Optional)

arp-drp-adj-exist

(Optional)

arp-dont-drp-ip-not-enable

(Optional)

arp-drp-inval-phy-iod

(Optional)

arp-drp-total-cnt

(Optional)

arp-dont-drop-total-cnt

(Optional)

arp-add-adj

(Optional)

arp-del-adj

(Optional)

arp-adj-already-exist

(Optional)

Command Mode

- /exec

show ip as-path-access-list

show ip as-path-access-list [ <aspl-name> | <aspl-cfg-name> ] [ __readonly__ TABLE_aspl <name> <action> <rule> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

as-path-access-list

List AS path access lists

aspl-name

(Optional) AS path access list name

aspl-cfg-name

(Optional) Known as-path access-list name

__readonly__

(Optional)

TABLE_aspl

(Optional)

name

(Optional)

action

(Optional)

rule

(Optional)

Command Mode

- /exec

show ip (m)bgp

show { ip mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] all | ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ ipv4 { unicast | multicast } ] } { rib-install | rib-uninstall | rib-pending } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

all

Display BGP information for all address families

rib-install

Routes installed in RIB

rib-uninstall

Routes not installed in RIB

rib-pending

Routes not acknowledged by RIB

Command Mode

- /exec

show ip cache

show ip cache { { brief | detail } | { interface [ <intf> ] } } [ operational ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

cache

Display ip cache

brief

Display summary of ip interface status and configuration

detail

Display detailed information of ip interface status and configuration

operational

(Optional) Display only interfaces that are administratively enabled

interface

Display ip related interface information

intf

(Optional) Interface name to display

Command Mode

- /exec

show ip client

show ip client [ <client-name> ] [ __readonly__ [ TABLE_ip_clnt [ TABLE_clnt { <clnt-name> <clnt-uuid> <clnt-pid> <clnt-ext-pid> [ <clnt-proto> ] <clnt-ind> <clnt-cntxt-id> <clnt-mts-sap> <clnt-flg> <clnt-msg-succ-cnt> <clnt-msg-fail-cnt> [ <clnt-recv-fn-name> <clnt-recv-fn> ] } ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

client

Display clients registered with the IP process

client-name

(Optional) Display information for a single IP client

__readonly__

(Optional)

TABLE_ip_clnt

(Optional)

TABLE_clnt

(Optional)

clnt-name

(Optional)

clnt-uuid

(Optional)

clnt-pid

(Optional)

clnt-ext-pid

(Optional)

clnt-proto

(Optional)

clnt-ind

(Optional)

clnt-cntxt-id

(Optional)

clnt-mts-sap

(Optional)

clnt-flg

(Optional)

clnt-msg-succ-cnt

(Optional)

clnt-msg-fail-cnt

(Optional)

clnt-recv-fn-name

(Optional)

clnt-recv-fn

(Optional)

Command Mode

- /exec

show ip community-list

show ip community-list [ <cl_name> ] [ __readonly__ TABLE_cl <name> <action> <rule> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

community-list

List community-list

cl_name

(Optional) Standard or expanded community-list name

__readonly__

(Optional)

TABLE_cl

(Optional)

name

(Optional)

action

(Optional)

rule

(Optional)

Command Mode

- /exec

show ip debug

show ip debug

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

debug

Display IP debug-filter configuration

Command Mode

- /exec

show ip dhcp global statistics

show ip dhcp global statistics [ __readonly__ <pkts_processed> <pkts_recvd_through_cfsoe> <pkts_fwded> <pkts_cfsoe_fwded> <pkts_dropped> <pkts_dropped_from_untrusted_ports> <pkts_dropped_src_mac_chk_fail> <pkts_dropped_opt82_ins_fail> <pkts_dropped_unknown_op_intf> <pkts_dropped_unknown_pkt> <pkts_dropped_no_trust_inf> <pkts_dropped_unknown_pkt> <pkts_dropped_relay_disable> <pkts_dropped_no_binding_entry> <pkts_dropped_interface_error> <pkts_dropped_max_hops_exceeded> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Show the IP features of the system

dhcp

Show information about DHCP

global

DHCP global stats

statistics

Statistics related to DHCP

__readonly__

(Optional) Read only

pkts_processed

(Optional)

pkts_recvd_through_cfsoe

(Optional)

pkts_fwded

(Optional)

pkts_cfsoe_fwded

(Optional)

pkts_dropped

(Optional)

pkts_dropped_from_untrusted_ports

(Optional)

pkts_dropped_src_mac_chk_fail

(Optional)

pkts_dropped_opt82_ins_fail

(Optional)

pkts_dropped_unknown_op_intf

(Optional)

pkts_dropped_unknown_pkt

(Optional)

pkts_dropped_no_trust_inf

(Optional)

pkts_dropped_relay_disable

(Optional)

pkts_dropped_no_binding_entry

(Optional)

pkts_dropped_interface_error

(Optional)

pkts_dropped_max_hops_exceeded

(Optional)

Command Mode

- /exec

show ip dhcp relay

show ip dhcp relay [ __readonly__ <relay_service_enable> <relay_opt82_enable> <relay_opt82_customize> <relay_subopt_VPN_enable> <relay_subopt_type_cisco_enable> <global_smart-relay_enable> <global_relay_trusted_enable> <relay_trusted_port_enable> <smart_relay_intfs_hdr> <subnet_bcast_intfs_hdr> <trusted_port_intfs_hdr> <relay_address_hdr> TABLE_intf <intf> <relay_address> <vrf_name> <smart_relay_enabled_intfs> <subnet_bcast_enabled_intfs> <trusted_port_enabled_intfs> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Show the IP features of the system

dhcp

Show items in DHCP

relay

DHCP relay

__readonly__

(Optional) Read only

relay_service_enable

(Optional)

relay_opt82_enable

(Optional)

relay_opt82_customize

(Optional)

relay_subopt_VPN_enable

(Optional)

relay_subopt_type_cisco_enable

(Optional)

global_smart-relay_enable

(Optional)

global_relay_trusted_enable

(Optional)

relay_trusted_port_enable

(Optional)

relay_address_hdr

(Optional)

smart_relay_intfs_hdr

(Optional)

subnet_bcast_intfs_hdr

(Optional)

trusted_port_intfs_hdr

(Optional)

TABLE_intf

(Optional)

intf

(Optional) interface name

relay_address

(Optional) helper address

vrf_name

(Optional) vrf name

smart_relay_enabled_intfs

(Optional) smart-relay enabled interfaces

subnet_bcast_enabled_intfs

(Optional) subnet_bcast enabled interfaces

trusted_port_enabled_intfs

(Optional) trusted_port enabled interfaces

Command Mode

- /exec

show ip dhcp relay address

show ip dhcp relay address [ interface <intf-range> ] [ __readonly__ TABLE_intf <intf_header> <intf2> <relay_address> <vrf_name> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Show the IP features of the system

dhcp

Show DHCP

relay

relay address of the interface

address

DHCP relay address

interface

(Optional) DHCP relay address of the interface

intf-range

(Optional) interface

__readonly__

(Optional) Read only

TABLE_intf

(Optional)

intf_header

(Optional)

intf2

(Optional) interface name

relay_address

(Optional) helper address

vrf_name

(Optional) VRF name

Command Mode

- /exec

show ip dhcp relay information trusted-sources

show ip dhcp relay information trusted-sources [ __readonly__ <header> TABLE_intf <intf> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Show the IP features of the system

dhcp

Show DHCP

relay

DHCP Relay

information

Relay information

trusted-sources

Relay Trusted Sources

__readonly__

(Optional) Read only

TABLE_intf

(Optional)

header

(Optional)

intf

(Optional) interface name

Command Mode

- /exec

show ip dhcp relay statistics

show ip dhcp relay statistics [ interface <intf> | { interface <intf> serverip <ip-addr-val> [ use-vrf <vrf-name> ] } ] [ __readonly__ <msg_stats_hdr> <msg_type_str> <tx_pkts> <rx_pkts> <drops> <msg_type_str_total> <total_tx_pkts> <total_rx_pkts> <total_drops> <line> <l3_fwd_hdr> <l3_fwd_tx_pkts> <l3_fwd_rx_pkts> <l3_fwd_drops> <server_consolidated_hdr> <server_total_request> <server_total_response> <server_req_hdr> <server_resp_hdr> <server_helper_addr> <server_vrf> <server_discover> <server_request> <server_decline> <server_release> <server_inform> <server_offer> <server_ack> <server_nack> <drop_hdr> <drop_opt82_insert_fail> <drop_unknown_op_intf> <drop_unknown> <drop_malformed> <drop_relay_disable> <drop_intf_err> <drop_tx_sock_err> <drop_tx_fail_client_intf> <drop_l3_unknown_op_intf> <drop_max_hops> <drop_invalid_msg_type> <drop_validation_fail> <drop_untrusted_relay_intf> <drop_mct_drop> <non_dhcp_hdr> <non_dhcp_tx_pkts> <non_dhcp_rx_pkts> <non_dhcp_drops> <footer> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Show the IP features of the system

dhcp

Show information about DHCP

relay

DHCP Relay

statistics

Statistics related to DHCP

interface

(Optional) input interface

intf

(Optional) interface

serverip

(Optional) Helper address

ip-addr-val

(Optional) IP address

use-vrf

(Optional) helper address VRF membership

vrf-name

(Optional) VRF name

__readonly__

(Optional) Read only

msg_stats_hdr

(Optional)

msg_type_str

(Optional)

tx_pkts

(Optional)

rx_pkts

(Optional)

drops

(Optional)

msg_type_str_total

(Optional)

total_tx_pkts

(Optional)

total_rx_pkts

(Optional)

total_drops

(Optional)

line

(Optional)

l3_fwd_hdr

(Optional)

l3_fwd_tx_pkts

(Optional)

l3_fwd_rx_pkts

(Optional)

l3_fwd_drops

(Optional)

server_consolidated_hdr

(Optional)

server_total_request

(Optional)

server_total_response

(Optional)

server_req_hdr

(Optional)

server_resp_hdr

(Optional)

server_helper_addr

(Optional)

server_vrf

(Optional)

server_discover

(Optional)

server_request

(Optional)

server_decline

(Optional)

server_release

(Optional)

server_inform

(Optional)

server_offer

(Optional)

server_ack

(Optional)

server_nack

(Optional)

drop_hdr

(Optional)

drop_opt82_insert_fail

(Optional)

drop_unknown_op_intf

(Optional)

drop_unknown

(Optional)

drop_malformed

(Optional)

drop_relay_disable

(Optional)

drop_intf_err

(Optional)

drop_max_hops

(Optional)

drop_tx_sock_err

(Optional)

drop_tx_fail_client_intf

(Optional)

drop_l3_unknown_op_intf

(Optional)

drop_invalid_msg_type

(Optional)

drop_validation_fail

(Optional)

drop_untrusted_relay_intf

(Optional)

drop_mct_drop

(Optional)

non_dhcp_hdr

(Optional)

non_dhcp_tx_pkts

(Optional)

non_dhcp_rx_pkts

(Optional)

non_dhcp_drops

(Optional)

footer

(Optional)

Command Mode

- /exec

show ip dhcp snooping

show ip dhcp snooping [ __readonly__ <snoop_service_enable> <snoop_gbl_enable> <snoop_vlan_enable> <snoop_oper_vlan_enable> <snoop_opt82_enable> <snoop_hwaddr_verify_enable> <snoop_hdr> TABLE_intf_entry <intf_entry_if_index> <intf_entry_trust_dhcp> <intf_entry_pkt_limit> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Show the IP features of the system

dhcp

Show items in DHCP

snooping

DHCP snooping

__readonly__

(Optional) Read only

snoop_service_enable

(Optional)

snoop_gbl_enable

(Optional)

snoop_vlan_enable

(Optional)

snoop_oper_vlan_enable

(Optional)

snoop_opt82_enable

(Optional)

snoop_hwaddr_verify_enable

(Optional)

snoop_hdr

(Optional)

TABLE_intf_entry

(Optional)

intf_entry_if_index

(Optional)

intf_entry_trust_dhcp

(Optional)

intf_entry_pkt_limit

(Optional)

Command Mode

- /exec

show ip dhcp snooping binding

show ip dhcp snooping binding [ <ip> | <mac> | vlan <vlan-range> |

Syntax Description

Syntax Description

show

Show running system information

ip

Show the IP features of the system

dhcp

Show items in DHCP

snooping

DHCP snooping

binding

DHCP snooping bindings

ip

(Optional) Binding entry IP address

mac

(Optional) Binding entry MAC address

vlan

(Optional) Binding entry VLAN

vlan-range

(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

Command Mode

- /exec

show ip dhcp snooping statistics

show ip dhcp snooping statistics [ { vlan <vlan-id> interface <intf> } |

Syntax Description

Syntax Description

vlan-id

(Optional) ]

show

Show running system information

ip

Show the IP features of the system

dhcp

Show information about DHCP

snooping

DHCP snooping

statistics

Statistics related to DHCP

vlan

(Optional) VLAN

interface

(Optional) input interface

intf

(Optional) interface

Command Mode

- /exec

show ip dhcp status

show ip dhcp status [ __readonly__ <current_cli_op> <last_cli_op> <last_cli_stat> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Show the IP features of the system

dhcp

Show information about DHCP

status

Current CLI command and execution status of the last command

__readonly__

(Optional) Read only

current_cli_op

(Optional)

last_cli_op

(Optional)

last_cli_stat

(Optional)

Command Mode

- /exec

show ip dns source-interface

show ip dns source-interface [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ { TABLE_ipdnsvrf <vrfname> <ifname> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

dns

Display domain-lookup information

source-interface

Display source interface information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_ipdnsvrf

(Optional) source interface of dns given vrf

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip dns source-interface vrf all

show ip dns source-interface vrf all [ __readonly__ [ { TABLE_ipdns <vrfname> <ifname> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

dns

Display domain-lookup information

source-interface

Display source interface information

vrf

Display per-VRF information

all

Display entries for all vrfs

__readonly__

(Optional)

TABLE_ipdns

(Optional) source interface of dns

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip eigrp

show { { ip eigrp [ <eigrp-ptag> ] neighbors [ detail | state ] { [ <interface> ] | { [ <address> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } } } | { ipv6 eigrp [ <eigrp-ptag> ] neighbors [ detail | state ] { [ <interface> ] | { [ <ipv6-addr> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } } } } [ __readonly__ TABLE_asn <asn> TABLE_vrf <vrf> [ { TABLE_peer <peer_handle> { <peer_ipaddr> | <peer_ipv6addr> } <peer_ifname> <peer_holdtime> <peer_srtt> <peer_rto> <peer_xmitq_count> <peer_last_seqno> <peer_uptime> [ <peer_static> <peer_nsf_restart_time> <peer_last_startup_serno> <peer_ios_major_ver> <peer_ios_minor_ver> <peer_eigrp_major_rev> <peer_eigrp_minor_rev> <peer_retrans_count> <peer_retry_count> <peer_wait_for_init> <peer_wait_for_init_ack> <peer_reinit_start_time> <peer_prefix_count> <peer_info_stubbed> <peer_info_receive_only> [ <peer_info_allow_connected> <peer_info_allow_statics> <peer_info_allow_summaries> <peer_info_allow_redist> <peer_info_allow_leaking> ] [ <peer_state_cr_mode> <peer_state_need_init> <peer_state_need_init_ack> <peer_state_going_down> <peer_state_coming_up> <peer_state_peer_deleted> <peer_state_nsf_in_progress> <peer_state_need_eot> <peer_state_use_nsf_startup_mode> <peer_state_await_nsf_convergence> <peer_state_initiated_gr> <peer_state_cr_sequence> <peer_state_rcv_probe_sequence> <peer_state_send_probe_sequence> ] <peer_suppress_queries> ] [ TABLE_xmitq_pkts <pkt_qtype> <pkt_counter> <pkt_opcode> <pkt_ack_seqno> <pkt_start_seqno> <pkt_end_seqno> <pkt_len> <pkt_time_sent> <pkt_init_flag> <pkt_sequenced> ] } ] [ { TABLE_suspended_peer { <susp_peer_ipaddr> | <susp_peer_ipv6addr> } <susp_peer_ifname> <susp_peer_restart_reqd> <susp_peer_restart_time> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

neighbors

IP-EIGRP neighbors

detail

(Optional) Show detailed peer information

state

(Optional) Show detailed peer and state information

interface

(Optional) Interface

address

(Optional) IP-EIGRP neighbor address

__readonly__

(Optional)

TABLE_asn

(Optional) AS number table

asn

(Optional) AS number

TABLE_vrf

(Optional) VRF table

vrf

(Optional) VRF name

TABLE_peer

(Optional) Peer table

peer_handle

(Optional) Peer handle

peer_ipaddr

(Optional) Peer's IP addr

peer_ifname

(Optional) Peering Interface name

peer_holdtime

(Optional) Hold-time for the peer

peer_uptime

(Optional) Peer Up-time

peer_srtt

(Optional) SRTT

peer_rto

(Optional) RTO

peer_xmitq_count

(Optional) Xmit Q count

peer_last_seqno

(Optional) Last received Sequence number

peer_static

(Optional) Static peer?

peer_nsf_restart_time

(Optional) Timestamp of last nsf restart

peer_last_startup_serno

(Optional) Target serial number for unicast startup

peer_ios_major_ver

(Optional) IOS major version

peer_ios_minor_ver

(Optional) IOS minor version

peer_eigrp_major_rev

(Optional) EIGRP major revision

peer_eigrp_minor_rev

(Optional) EIGRP minor revision

peer_retrans_count

(Optional) Number of retransmissions to this peer

peer_retry_count

(Optional) Retries for packets on xmit Q

peer_wait_for_init

(Optional) Waiting for INIT

peer_wait_for_init_ack

(Optional) Waiting for INIT-ACK

peer_reinit_start_time

(Optional) Re-Init start time

peer_prefix_count

(Optional) Number of Prefixes received from the peer

peer_info_stubbed

(Optional) Peer is a Stub?

peer_info_receive_only

(Optional) Peer is receive-only?

peer_info_allow_connected

(Optional) Peer advertises connected routes?

peer_info_allow_statics

(Optional) Peer advertises static routes?

peer_info_allow_summaries

(Optional) Peer advertises summary routes?

peer_info_allow_redist

(Optional) Peer advertises redistributed routes?

peer_info_allow_leaking

(Optional) Peer advertises routes permitted by leak-map?

peer_state_cr_mode

(Optional) Conditional Received mode set?

peer_state_need_init

(Optional) Waiting for Init from peer?

peer_state_need_init_ack

(Optional) Waiting for InitAck from peer?

peer_state_going_down

(Optional) Peer-Going-down?

peer_state_coming_up

(Optional) Peer-Coming-up?

peer_state_peer_deleted

(Optional) Peer-Deleted?

peer_state_nsf_in_progress

(Optional) Peer is nsf restarting?

peer_state_need_eot

(Optional) Expect end-of-table from this peer?

peer_state_use_nsf_startup_mode

(Optional) Use nsf startup method?

peer_state_await_nsf_convergence

(Optional) The peer is waiting eot from us?

peer_state_initiated_gr

(Optional) Initiated graceful restart?

peer_state_cr_sequence

(Optional) Expected sequence number of CR packet

peer_state_rcv_probe_sequence

(Optional) Sequence number of last probe packet received

peer_state_send_probe_sequence

(Optional) Sequence number of next probe to send

peer_suppress_queries

(Optional) Supress queries to this peer?

TABLE_xmitq_pkts

(Optional) Xmit Q packtes table

pkt_qtype

(Optional) XMIT Qtype

pkt_counter

(Optional) Packet counter for the packets present in the transmit queue

pkt_opcode

(Optional) Packet opcode

pkt_ack_seqno

(Optional) Ack/Sequence number of this packet

pkt_start_seqno

(Optional) Starting serial number

pkt_end_seqno

(Optional) Ending serial number

pkt_len

(Optional) Packet length

pkt_time_sent

(Optional) Time at which the packet is transmitted

pkt_init_flag

(Optional) Init-flag should be sent in the packet?

pkt_sequenced

(Optional) Packet is sequenced?

TABLE_suspended_peer

(Optional) Suspended peer table

susp_peer_ipaddr

(Optional) IP address of suspended peer

susp_peer_ifname

(Optional) Inteface through which we are connected to the suspended peer

susp_peer_restart_reqd

(Optional) Suspended peer restart required?

susp_peer_restart_time

(Optional) Suspended peer restart time

eigrp-ptag

(Optional)

Command Mode

- /exec

show ip eigrp

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_asn <asn> <router_id> TABLE_vrf <vrf> <state> <authen_md5> <authen_keychain> <metric_weight_k1> <metric_weight_k2> <metric_weight_k3> <metric_weight_k4> <metric_weight_k5> [ <metric_weight_k6> <metric_ribscale> ] <metric_version> <eigrp_proto> { <multicast_group> | <multicast_groupv6> } <int_distance> <ext_distance> <max_paths> <num_interfaces> <num_lo_interfaces> <num_pass_interfaces> <num_peers> [ { TABLE_redist <redist_srcproto> <redist_routemap> } ] <graceful_restart> <stub_configured> [ <stub_option_connected> <stub_option_summary> <stub_option_redist> <stub_option_leak_map> <stub_option_receive_only> ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

detail

(Optional) Show detailed EIGRP process stats

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

__readonly__

(Optional)

TABLE_asn

(Optional) AS Number table

asn

(Optional) AS number

router_id

(Optional) Router-ID

TABLE_vrf

(Optional) VRF table

vrf

(Optional) VRF name

state

(Optional) EIGRP Process Status

authen_md5

(Optional) Authentication Mode

authen_keychain

(Optional) Authentication Key-Chain

metric_weight_k1

(Optional) DUAL metric k1

metric_weight_k2

(Optional) DUAL metric k2

metric_weight_k3

(Optional) DUAL metric k3

metric_weight_k4

(Optional) DUAL metric k4

metric_weight_k5

(Optional) DUAL metric k5

metric_weight_k6

(Optional) DUAL metric k6

metric_ribscale

(Optional) RIB Scale

metric_version

(Optional) Metric version

eigrp_proto

(Optional) IP Protocol number

multicast_group

(Optional) Multicast Group Address

int_distance

(Optional) Internal Administrative Distance

ext_distance

(Optional) External Administrative Distance

max_paths

(Optional) Maximum paths allowed for a dndb

num_interfaces

(Optional) Number of EIGRP interfaces configured under this AS

num_lo_interfaces

(Optional) Number of EIGRP loopback interfaces configured under this AS

num_pass_interfaces

(Optional) Number of EIGRP Passive interfaces configured under this AS

num_peers

(Optional) Number of EIGRP peers

TABLE_redist

(Optional) Redistribution Table

redist_srcproto

(Optional) Source protocol of the redistributed route

redist_routemap

(Optional) Route-map used in this redistribution

graceful_restart

(Optional) Graceful restart configured?

stub_configured

(Optional) Stub-Routing configured?

stub_option_connected

(Optional) Advertise connected routes?

stub_option_summary

(Optional) Advertise summary routes?

stub_option_redist

(Optional) Advertise redistributed routes?

stub_option_leak_map

(Optional) Allow routes permitted by leak-map?

stub_option_receive_only

(Optional) Configured as receive only?

Command Mode

- /exec

show ip eigrp accounting

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] accounting [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_asn <asn> <router_id> TABLE_vrf <vrf> <total_prefix> <redist_state> <redist_count> <restart_count> <acct_timer> [ TABLE_peer { <p_ipaddr> | <p_ipv6addr> } <p_state> <p_ifname> <p_prefix_count> <p_restart_count> <p_acct_timer> ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

accounting

IP-EIGRP Accounting

__readonly__

(Optional)

TABLE_asn

(Optional) AS number table

asn

(Optional) AS number

router_id

(Optional) Router-ID

TABLE_vrf

(Optional) VRF table

vrf

(Optional) VRF name

total_prefix

(Optional) Total prefix count (Aggregate)

redist_state

(Optional) State of redistributed prefixes

redist_count

(Optional) Number of redistributed prefixes

restart_count

(Optional) Number of times the prefix was suspended

acct_timer

(Optional) Accounting timer

TABLE_peer

(Optional) Peer (Prefix) table

p_ipaddr

(Optional) Peer IP addr

p_state

(Optional) Peer state

p_ifname

(Optional) Peering interface

p_prefix_count

(Optional) Number of Prefixes learnt from the peer

p_restart_count

(Optional) Number of times the prefix was suspended

p_acct_timer

(Optional) Peer accounting timer

Command Mode

- /exec

show ip eigrp event-history

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] [ internal ] event-history { fsm | packet | rib }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

eigrp-ptag

(Optional) Process tag

internal

(Optional) Commands for internal use

event-history

Event History of EIGRP

fsm

FSM log of EIGRP

packet

Packet log of EIGRP

rib

RIB log of EIGRP

Command Mode

- /exec

show ip eigrp event-history bfd

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] [ internal ] event-history bfd

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

eigrp-ptag

(Optional) Process tag

internal

(Optional) Commands for internal use

event-history

Event History of EIGRP

bfd

Show bfd log of EIGRP

Command Mode

- /exec

show ip eigrp event

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] event [ <start-num> <end-num> ] [ type ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

event

IP-EIGRP Events

start-num

(Optional) Starting event number

end-num

(Optional) Ending event number

type

(Optional) Show Events being logged

Command Mode

- /exec

show ip eigrp interfaces

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] interfaces [ detail ] [ <interface> ] [ brief ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_asn <asn> TABLE_vrf <vrf> [ TABLE_if <ifname> <peer_count> <xmitq_unrel> <xmitq_rel> <mean_srtt> <send_intvl_unrel> <send_intvl_rel> <mcast_flow_delay> <pending_routes> [ <hello_intvl> <holdtime_intvl> <next_xmit_serno> <packetize_pending> <mcasts_sent_unrel> <mcasts_sent_rel> <ucasts_sent_unrel> <ucasts_sent_rel> <mcast_exceptions> <cr_packets> <acks_suppressed> <retrans_sent> <out_of_seq_rcvd> <stub_interface> <nexthop_self> <auth_mode_md5> <auth_key_chain> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

interfaces

IP-EIGRP interfaces

detail

(Optional) Show detailed interface information

interface

(Optional) Interface

brief

(Optional) Show summary information only

__readonly__

(Optional)

TABLE_asn

(Optional) AS number table

asn

(Optional) AS number

TABLE_vrf

(Optional) VRF table

vrf

(Optional) VRF name

TABLE_if

(Optional) Interface table

ifname

(Optional) Interface name

peer_count

(Optional) Number of Peer on this interface

xmitq_unrel

(Optional) Xmit Q (unreliable) count

xmitq_rel

(Optional) Xmit Q (reliable) count

mean_srtt

(Optional) Mean of all peer SRTTs

send_intvl_unrel

(Optional) Base packet gap, per queue (unreliable)

send_intvl_rel

(Optional) Base packet gap, per queue (reliable)

mcast_flow_delay

(Optional) Last delay for Multicast flow control timer

pending_routes

(Optional) Pending routes on the interface

hello_intvl

(Optional) Configured hello interval for interface

holdtime_intvl

(Optional) Configured holdtime interval for interface

next_xmit_serno

(Optional) Next xmit serial number

packetize_pending

(Optional) Packetization pending?

mcasts_sent_unrel

(Optional) Number of Multicasts sent (unreliable)

mcasts_sent_rel

(Optional) Number of Multicasts sent (reliable)

ucasts_sent_unrel

(Optional) Number of Unicasts sent (unreliable)

ucasts_sent_rel

(Optional) Number of Unicasts sent (reliable)

mcast_exceptions

(Optional) Multicast exceptions (Count of multicasts sent as unicasts)

cr_packets

(Optional) Count of Multicasts sent with CR

acks_suppressed

(Optional) Count of suppressed ACK packets

retrans_sent

(Optional) Count of Retransmissions sent

out_of_seq_rcvd

(Optional) Count of packets received Out-of-Sequence

stub_interface

(Optional) All Peers are stubbed?

nexthop_self

(Optional) should retain next-hop?

auth_mode_md5

(Optional) MD5 Authentication enabled?

auth_key_chain

(Optional) Authentication key-chain

Command Mode

- /exec

show ip eigrp internal

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] internal

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

eigrp-ptag

(Optional) Process tag

internal

Commands for internal use

Command Mode

- /exec

show ip eigrp internal library-info

show ip eigrp [ <eigrp-ptag> ] internal library-info

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

eigrp

Display EIGRP status and configuration

eigrp-ptag

(Optional) Process tag

internal

Commands for internal use

library-info

Show various event logs of library

Command Mode

- /exec

show ip eigrp internal mem-stats

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] internal mem-stats [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

eigrp-ptag

(Optional) Process tag

internal

Commands for internal use

mem-stats

Show memory allocation statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show ip eigrp internal syslog rate-limit

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] internal syslog rate-limit

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

eigrp-ptag

(Optional) Process tag

internal

Commands for internal use

syslog

control syslog message

rate-limit

rate-limiting

Command Mode

- /exec

show ip eigrp metric

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] metric <bw> <delay> [ <rel> ] [ <load> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

metric

Compute composite metric from vector metric

bw

Bandwidth in Kbits per second

delay

Delay metric

rel

(Optional) Reliability metric where 255 is 100% reliable

load

(Optional) Effective bandwidth metric (Loading) where 255 is 100% loaded

Command Mode

- /exec

show ip eigrp route-map statistics

show ip eigrp [ <eigrp-ptag> ] route-map statistics { { redistribute { bgp <as> | { eigrp | isis | ospf | rip } <tag> | static | direct | amt | lisp } } | table-map } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_asn <asn> TABLE_vrf <vrf> { TABLE_rmap <name> <action> <seq_num> [ { TABLE_cmd <command> <compare_count> <match_count> } ] } <total_accept_count> <total_reject_count> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

route-map

Route-map related information

statistics

Route-map statistics

redistribute

Redistribute information from another routing protocol

table-map

Tablemap information

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

isis

IS-IS Routing for IPv4

ospf

Open Shortest Path First (OSPF)

rip

Routing Information Protocol (RIP)

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

tag

Process tag

static

Static routes

direct

Directly connected

amt

AMT Anycast prefix

lisp

LISP EID-prefixes

__readonly__

(Optional)

TABLE_asn

(Optional) AS number table

asn

(Optional) AS number

TABLE_vrf

(Optional) VRF table

vrf

(Optional) VRF name

TABLE_rmap

(Optional) Routemap table

name

(Optional) Route-map Name

action

(Optional) Route-map action

seq_num

(Optional) Sequence number of the rule in route-map

TABLE_cmd

(Optional) Route-map command table

command

(Optional) Route-map command

compare_count

(Optional) Number of comparisons

match_count

(Optional) Number of matches

total_accept_count

(Optional) Total number of packets accepted by the policy

total_reject_count

(Optional) Total number of pakcets rejected by the policy

Command Mode

- /exec

show ip eigrp sia-event

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] sia-event [ <start-num> <end-num> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

sia-event

IP-EIGRP SIA event

start-num

(Optional) Starting event number

end-num

(Optional) Ending event number

Command Mode

- /exec

show ip eigrp sia-statistics

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] sia-statistics [ <peer> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

sia-statistics

IP-EIGRP SIA Statistics

peer

(Optional) Peer ID to display information about

Command Mode

- /exec

show ip eigrp timers

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] timers [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

timers

IP-EIGRP Timers

Command Mode

- /exec

show ip eigrp traffic

show { ip | ipv6 } eigrp [ <eigrp-ptag> ] traffic [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_asn <asn> TABLE_vrf <vrf> <hellos_sent> <hellos_rcvd> <updates_sent> <updates_rcvd> <queries_sent> <queries_rcvd> <replies_sent> <replies_rcvd> <acks_sent> <acks_rcvd> <max_inqueue_depth> <inqueue_drops> <sia_queries_sent> <sia_queries_rcvd> <sia_replies_sent> <sia_replies_rcvd> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

traffic

IP-EIGRP Traffic Statistics

__readonly__

(Optional)

TABLE_asn

(Optional) AS number table

asn

(Optional) AS number

TABLE_vrf

(Optional) VRF table

vrf

(Optional) VRF name

hellos_sent

(Optional) Number of Hellos sent

hellos_rcvd

(Optional) Number of Hellos received

updates_sent

(Optional) Number of Updates sent

updates_rcvd

(Optional) Number of Updates received

queries_sent

(Optional) Number of Queries sent

queries_rcvd

(Optional) Number of Queries received

replies_sent

(Optional) Number of Replies sent

replies_rcvd

(Optional) Number of Replies received

acks_sent

(Optional) Number of ACKs sent

acks_rcvd

(Optional) Number of ACKs received

max_inqueue_depth

(Optional) Input queue high water mark

inqueue_drops

(Optional) Input queue drops

sia_queries_sent

(Optional) Number of SIA queries sent

sia_queries_rcvd

(Optional) Number of SIA queries received

sia_replies_sent

(Optional) Number of SIA replies sent

sia_replies_rcvd

(Optional) Number of SIA replies received

Command Mode

- /exec

show ip extcommunity-list

show ip extcommunity-list [ <extcl_name> ] [ __readonly__ TABLE_extcl <name> <action> <rule> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

extcommunity-list

List extcommunity-list

extcl_name

(Optional) Standard or expanded community-list name

__readonly__

(Optional)

TABLE_extcl

(Optional)

name

(Optional)

action

(Optional)

rule

(Optional)

Command Mode

- /exec

show ip fib adjacency

show ip fib adjacency [ <aif> ] [ <anh> ] [ module <module> ] [ __readonly__ <adj-count> <nexthop> <rewinfo> <interface> ]

Syntax Description

Syntax Description

show

ip

Display IP information

fib

Forwarding information

adjacency

display adjacency information

aif

(Optional) adjacency output interface

anh

(Optional) adjacency next hop

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

adj-count

(Optional) total adj count

nexthop

(Optional) next hop address

rewinfo

(Optional) rewrite information

interface

(Optional) output interface

Command Mode

- /exec

show ip fib interfaces

show ip fib interfaces [ module <module> ] [ __readonly__ <intf> <v4adjcnt> <v6adjcnt> <rpfmode> ]

Syntax Description

Syntax Description

show

ip

Display IP information

fib

Forwarding information

interfaces

show fib interface info

__readonly__

(Optional)

intf

(Optional) interface name

module

(Optional) slot

module

(Optional) slot number

v4adjcnt

(Optional) count of v4 adjacencies

v6adjcnt

(Optional) count of v6 adjacencies

rpfmode

(Optional) uRPF mode

Command Mode

- /exec

show ip fib internal error counts

show ip fib internal error counts [ module <module> ] [ __readonly__ <err-str><count> ]

Syntax Description

Syntax Description

show

ip

Display IP information

fib

Forwarding information

internal

internal information

error

display internal errors

counts

display error counts

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

Command Mode

- /exec

show ip fib mroute

show ip fib mroute [ { <group> | <gprefix> } [ <source> ] ] [ table <table-id> ] [ module <module> ] [ __readonly__ <table_type> <num_groups> <num_sources> <src_len> <grp_len> <df_ordinal> <rpfif> <rpf_ifindex> <flag> <flag_value> <route_pkts> <route_bytes> <oiflist_id> <platform_id> <oif_count> <refcount> <oifname> <oifindex> <oif_pkts> <oif_bytes> ]

Syntax Description

Syntax Description

show

ip

Display IP information

fib

Forwarding information

mroute

Multicast IPv4 routes

group

(Optional) Multicast IPv4 Group Address

gprefix

(Optional) Multicast IPv4 Group Prefix

source

(Optional) Multicast IPv4 Source Address

table

(Optional) display info per vpn-id

table-id

(Optional) table-id

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

table_type

(Optional) Table Type

num_groups

(Optional) Number of group entries in the table

num_sources

(Optional) Number of (S, G) entries for the group address

src_len

(Optional) Source Address Mask

grp_len

(Optional) Group address Mask

df_ordinal

(Optional) DF ordinal

rpfif

(Optional) RPF interface

rpf_ifindex

(Optional) RPF Interface ifIndex

flag

(Optional) Route type flag

flag_value

(Optional) hex value of route flag

route_pkts

(Optional) Route packet count

route_bytes

(Optional) Route bytes

oiflist_id

(Optional) OIF list Identifier

platform_id

(Optional) Platform-index

oif_count

(Optional) Number of OIFs

refcount

(Optional) OIF list Reference Count

oifname

(Optional) OIF Interface name

oifindex

(Optional) OIF Interface ifIndex

oif_pkts

(Optional) OIF packets

oif_bytes

(Optional) OIF bytes

Command Mode

- /exec

show ip fib mroute

show ip fib mroute [ { <group> | <gprefix> } [ <source> ] ] [ table <table-id> ] [ module <module> ] [ __readonly__ <table_type> <num_groups> <num_sources> <src_len> <grp_len> <df_ordinal> <rpfif> <rpf_ifindex> <flag> <flag_value> <route_pkts> <route_bytes> <oiflist_id> <platform_id> <oif_count> <refcount> <oifname> <oifindex> <oif_pkts> <oif_bytes> ]

Syntax Description

Syntax Description

show

ip

Display IP information

fib

Forwarding information

mroute

Multicast IPv4 routes

group

(Optional) Multicast IPv4 Group Address

gprefix

(Optional) Multicast IPv4 Group Prefix

source

(Optional) Multicast IPv4 Source Address

table

(Optional) display info per vpn-id

table-id

(Optional) table-id

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

table_type

(Optional) Table Type

num_groups

(Optional) Number of group entries in the table

num_sources

(Optional) Number of (S, G) entries for the group address

src_len

(Optional) Source Address Mask

grp_len

(Optional) Group address Mask

df_ordinal

(Optional) DF ordinal

rpfif

(Optional) RPF interface

rpf_ifindex

(Optional) RPF Interface ifIndex

flag

(Optional) Route type flag

flag_value

(Optional) hex value of route flag

route_pkts

(Optional) Route packet count

route_bytes

(Optional) Route bytes

oiflist_id

(Optional) OIF list Identifier

platform_id

(Optional) Platform-index

oif_count

(Optional) Number of OIFs

refcount

(Optional) OIF list Reference Count

oifname

(Optional) OIF Interface name

oifindex

(Optional) OIF Interface ifIndex

oif_pkts

(Optional) OIF packets

oif_bytes

(Optional) OIF bytes

Command Mode

- /exec

show ip fib mroute txlist

show ip fib mroute txlist [ module <module> ]

Syntax Description

Syntax Description

show

ip

Display IP information

fib

Forwarding information

mroute

display IP mcast routing table

txlist

display routes in the txlist

module

(Optional) slot

module

(Optional) slot number

Command Mode

- /exec

show ip fib route

show ip fib route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] [ summary | <prefix> [ longer-prefixes ] | <address> | interface <interface> | next-hop <nh> | attached | unresolved | adjacency { <aif> <anh> | drop | glean | punt } ] [ module <module> | vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] + [ __readonly__ <header> <vrfname> <tableid> <prefix-count> <pfx> { <nexthop> | <special> } <intf> <route-count> <path-count> <mask-length> <routes-per-mask> ]

Syntax Description

Syntax Description

show

ip

Display IP information

fib

Forwarding information

route

display IP routing table

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

table

(Optional) display info per vpn-id

table_id

(Optional) table number

summary

(Optional) display route counts

prefix

(Optional) display single exact match route

longer-prefixes

(Optional) display longer prefixes

address

(Optional) display single longest match route

interface

(Optional) display routes with this output i/f only

interface

(Optional) output interface

next-hop

(Optional) display routes with this next-hop only

nh

(Optional) next hop address

attached

(Optional) display directly connected routes

unresolved

(Optional) display unresolved routes

adjacency

(Optional) display routes via specified adjacency

aif

(Optional) adjacency output interface

anh

(Optional) adjacency next-hop address

drop

(Optional) display routes via drop adjacency

glean

(Optional) display routes via glean adjacency

punt

(Optional) display routes via punt adjacency

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

header

(Optional) header string

vrfname

(Optional) VRF name

tableid

(Optional) table identifier

prefix-count

(Optional) total number of prefix in VRF

pfx

(Optional) ipv4 prefix

nexthop

(Optional) next hop address

special

(Optional) special adjacencies

intf

(Optional) output interface

route-count

(Optional) total number of routes in VRF

path-count

(Optional) total number of paths in VRF

mask-length

(Optional) length of mask

routes-per-mask

(Optional)

Command Mode

- /exec

show ip fib route

show ip fib route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] [ summary | <prefix> [ longer-prefixes ] | <address> | interface <interface> | next-hop <nh> | attached | unresolved | adjacency { <aif> <anh> | drop | glean | punt } ] [ module <module> | vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] + [ __readonly__ <header> <vrfname> <tableid> <prefix-count> <pfx> { <nexthop> | <special> } <intf> <route-count> <path-count> <mask-length> <routes-per-mask> ]

Syntax Description

Syntax Description

show

ip

Display IP information

fib

Forwarding information

route

display IP routing table

vrf

(Optional) display info per VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

table

(Optional) display info per vpn-id

table_id

(Optional) table number

summary

(Optional) display route counts

prefix

(Optional) display single exact match route

longer-prefixes

(Optional) display longer prefixes

address

(Optional) display single longest match route

interface

(Optional) display routes with this output i/f only

interface

(Optional) output interface

next-hop

(Optional) display routes with this next-hop only

nh

(Optional) next hop address

attached

(Optional) display directly connected routes

unresolved

(Optional) display unresolved routes

adjacency

(Optional) display routes via specified adjacency

aif

(Optional) adjacency output interface

anh

(Optional) adjacency next-hop address

drop

(Optional) display routes via drop adjacency

glean

(Optional) display routes via glean adjacency

punt

(Optional) display routes via punt adjacency

module

(Optional) slot

module

(Optional) slot number

__readonly__

(Optional)

header

(Optional) header string

vrfname

(Optional) VRF name

tableid

(Optional) table identifier

prefix-count

(Optional) total number of prefix in VRF

pfx

(Optional) ipv4 prefix

nexthop

(Optional) next hop address

special

(Optional) special adjacencies

intf

(Optional) output interface

route-count

(Optional) total number of routes in VRF

path-count

(Optional) total number of paths in VRF

mask-length

(Optional) length of mask

routes-per-mask

(Optional)

Command Mode

- /exec

show ip fib route recovered

show ip fib route recovered

Syntax Description

Syntax Description

show

ip

ipv4

fib

display fib information

route

display IP routing table

recovered

log of routes recovered after TCAM free condition

Command Mode

- /exec

show ip ftm statistics

show ip ftm statistics

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ftm

FTM API

statistics

Statistics

Command Mode

- /exec

show ip ftp source-interface

show ip ftp source-interface [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ { TABLE_ipftpvrf <vrfname> <ifname> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ftp

Display FTP client information

source-interface

Display source interface information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_ipftpvrf

(Optional) source interface of ftp given vrf

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip ftp source-interface vrf all

show ip ftp source-interface vrf all [ __readonly__ [ { TABLE_ipftp <vrfname> <ifname> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ftp

Display FTP client information

source-interface

Display source interface information

vrf

Display per-VRF information

all

Display entries for all vrfs

__readonly__

(Optional)

TABLE_ipftp

(Optional) source interface of ftp

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip http source-interface

show ip http source-interface [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ { TABLE_iphttpvrf <vrfname> <ifname> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

http

Display HTTP client information

source-interface

Display source interface information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_iphttpvrf

(Optional) source interface of http given vrf

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip http source-interface vrf all

show ip http source-interface vrf all [ __readonly__ [ { TABLE_iphttp <vrfname> <ifname> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

http

Display HTTP client information

source-interface

Display source interface information

vrf

Display per-VRF information

all

Display entries for all vrfs

__readonly__

(Optional)

TABLE_iphttp

(Optional) source interface of http

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip igmp event-history

show ip igmp [ internal ] event-history { errors | msgs | <igmp-event-hist-buf-name> | statistics }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

internal

(Optional) Commands for internal use

event-history

Show various event logs of IGMP

errors

Show error logs of IGMP

msgs

Show various message logs of IGMP

igmp-event-hist-buf-name

Show various logs of IGMP

statistics

Show state and size of buffer

Command Mode

- /exec

show ip igmp groups

show ip igmp { groups | route } [ { <source> [ <group> ] } | { <group> [ <source> ] } ] [ <interface> ] [ summary ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ summary-old ] [ __readonly__ { TABLE_vrf <vrf> <if-name> <group-addr> <entry-count> <restart-count> { TABLE_group <group-addr> <if-name> <uptime> <expires> <reporter> <static-oif> <local-group> { TABLE_source <source-addr> <if-name> <uptime> <expires> <reporter> <static-oif> <local-group> <translated> } } } { TABLE_vrfsumm <vrf-summ> <g-count> <sg-count> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

groups

Display IGMP attached group membership information

route

Display IGMP attached group membership information

group

(Optional) Multicast IP address of single group to display

source

(Optional) Source IP address

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

interface

(Optional) Display group membership on single interface name

summary

(Optional) Display group summary

summary-old

(Optional) Display group summary

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

if-name

(Optional)

group-addr

(Optional)

entry-count

(Optional)

restart-count

(Optional)

TABLE_group

(Optional)

uptime

(Optional)

expires

(Optional)

static-oif

(Optional)

local-group

(Optional)

reporter

(Optional)

TABLE_source

(Optional)

source-addr

(Optional)

translated

(Optional)

TABLE_vrfsumm

(Optional)

vrf-summ

(Optional)

g-count

(Optional)

sg-count

(Optional)

Command Mode

- /exec

show ip igmp interface show ip igmp interface

show ip igmp interface <interface> [ detail ] | show ip igmp interface [ brief ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf> <entry-count> { TABLE_if <if-name> <if-status> <ip-sum> <addr> <querier> <q-ver> <next-query> <expires> <mc> <ver> <host-ver> <qi> <cqi> <mrt> <cmrt> <sqi> <csqi> <sqc> <lmmrt> <lmqc> <gt> <cgt> <qt> <cqt> <uri> <rv> <crv> <rll> <rc> <v1rr> <v2qs> <v2qr> <v2rs> <v2rr> <v2ls> <v2lr> <v3qs> <v3qr> <v3rs> <v3rr> <cse> <v2gqdest> <v3gqdest> <ple> <lsip> <scf> <qnq> <rvm> <qvm> <uit> <v1gdam> <v2gdam> <v3dai> <ra> <static-group-map> <join-group-map> <il> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

interface

Display IGMP interface related information

detail

(Optional) Display detailed information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

interface

Interface name of single interface to display

brief

(Optional) Display one line status per interface

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

entry-count

(Optional)

TABLE_if

(Optional)

if-name

(Optional)

if-status

(Optional)

ip-sum

(Optional)

addr

(Optional)

querier

(Optional)

q-ver

(Optional)

next-query

(Optional)

expires

(Optional)

mc

(Optional)

ver

(Optional)

host-ver

(Optional)

qi

(Optional)

cqi

(Optional)

mrt

(Optional)

cmrt

(Optional)

sqi

(Optional)

csqi

(Optional)

sqc

(Optional)

lmmrt

(Optional)

lmqc

(Optional)

gt

(Optional)

cgt

(Optional)

qt

(Optional)

cqt

(Optional)

uri

(Optional)

rv

(Optional)

crv

(Optional)

rll

(Optional)

rc

(Optional)

v1rr

(Optional)

v2qs

(Optional)

v2qr

(Optional)

v2rs

(Optional)

v2rr

(Optional)

v2ls

(Optional)

v2lr

(Optional)

v3qs

(Optional)

v3qr

(Optional)

v3rs

(Optional)

v3rr

(Optional)

v2gqdest

(Optional)

v3gqdest

(Optional)

cse

(Optional)

ple

(Optional)

lsip

(Optional)

scf

(Optional)

qnq

(Optional)

rvm

(Optional)

qvm

(Optional)

uit

(Optional)

v1gdam

(Optional)

v2gdam

(Optional)

v3dai

(Optional)

ra

(Optional)

static-group-map

(Optional)

join-group-map

(Optional)

il

(Optional)

Command Mode

- /exec

show ip igmp internal

show ip igmp internal

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

internal

Commands for internal use

Command Mode

- /exec

show ip igmp internal

show ip igmp internal { errors | iod-cache | pss-dump | flexlink-iod-cache }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

internal

Commands for internal use

errors

Show IGMP / IGMP-SNOOP errors

iod-cache

Show IGMP Interface IOD->Ifindex mapping cache

flexlink-iod-cache

Show IGMP's Flexlink IOD cache

pss-dump

Show IGMP PSS dump

Command Mode

- /exec

show ip igmp internal library-info

show ip igmp internal library-info

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

internal

Commands for internal use

library-info

Show various event logs of library

Command Mode

- /exec

show ip igmp internal mem-stats

show ip igmp internal mem-stats [ all ] [ no-libs ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

internal

Commands for internal use

mem-stats

Show memory allocation statistics

all

(Optional) Display private and shared memory statistics

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

Command Mode

- /exec

show ip igmp internal mrib-cache

show ip igmp internal mrib-cache [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

internal

Commands for internal use

mrib-cache

IGMP MRIB routes

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show ip igmp internal mrib

show ip igmp internal { mrib-txlist [ vrf { <vrf-name> | <vrf-known-name> | all } ] | mrib-buffers }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

internal

Commands for internal use

mrib-txlist

Show MRIB transmission-list information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

mrib-buffers

Show MRIB route buffer information

Command Mode

- /exec

show ip igmp internal pim-cache

show ip igmp internal pim-cache [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

internal

Commands for internal use

pim-cache

Show PIM client cache

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show ip igmp internal vpc

show ip igmp internal { vpc | emulated-switch } [ __readonly__ TABLE_vpc <vpc_lib_reg> <mcec_tl_reg> <mct_up> <mct_name> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

internal

Commands for internal use

vpc

Show vpc information

emulated-switch

Show emulated-switch information

__readonly__

(Optional)

TABLE_vpc

(Optional)

vpc_lib_reg

(Optional)

mcec_tl_reg

(Optional)

mct_name

(Optional)

mct_up

(Optional)

Command Mode

- /exec

show ip igmp local-groups

show ip igmp local-groups [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf> { TABLE_entry <group-addr> <source-addr> <static-oif> <local-group> <if-name> <last-reported> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

local-groups

Display IGMP local group membership information

interface

(Optional) Display group membership on single interface name

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

TABLE_entry

(Optional)

group-addr

(Optional)

source-addr

(Optional)

static-oif

(Optional)

local-group

(Optional)

if-name

(Optional)

last-reported

(Optional)

Command Mode

- /exec

show ip igmp policy statistics reports

show ip igmp policy statistics reports [ <interface> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Show IGMP related information

policy

Policy related information

statistics

Policy statistics

reports

IGMP reports

interface

(Optional) Interface to display statistics for

Command Mode

- /exec

show ip igmp snooping

show ip igmp snooping [ { vlan <vlan> | bridge-domain <bdid> } ] [ __readonly__ <vdc> <enabled> <grepsup> <gv3repsup> <glinklocalgrpsup> <rle> { TABLE_vlan <vlan-id> [ <description> ] [ <snoop-on> <qa> <qv> <qi> <qlmqi> <rv> <sq> <sqr> <eht> <fl> <repsup> <v3repsup> <vlinklocalgrpsup> <leavegroupaddress> <rpc> <gc> <actvports> <lkupmode> <reportfloodenable> <reportfloodall> ] [ TABLE_intf <if-name> ] } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

vlan

(Optional) Display VLAN IGMP snooping membership information

vlan

(Optional) Specify VLAN

bridge-domain

(Optional) Display BD IGMP snooping membership information

bdid

(Optional) Specify BD

__readonly__

(Optional)

vdc

(Optional)

enabled

(Optional)

grepsup

(Optional)

gv3repsup

(Optional)

glinklocalgrpsup

(Optional)

rle

(Optional)

TABLE_vlan

(Optional)

vlan-id

(Optional)

description

(Optional) description, if any

snoop-on

(Optional)

qa

(Optional)

qv

(Optional)

qi

(Optional)

qlmqi

(Optional)

rv

(Optional)

sq

(Optional)

sqr

(Optional)

eht

(Optional)

fl

(Optional)

repsup

(Optional)

v3repsup

(Optional)

vlinklocalgrpsup

(Optional)

leavegroupaddress

(Optional)

reportfloodenable

(Optional)

reportfloodall

(Optional)

rpc

(Optional)

gc

(Optional)

actvports

(Optional)

lkupmode

(Optional)

TABLE_intf

(Optional)

if-name

(Optional)

Command Mode

- /exec

show ip igmp snooping event-history

show ip igmp snooping [ internal ] event-history { statistics | <igmp-snoop-event-hist-buf-name> }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

internal

(Optional) Display IGMP snooping internal information

event-history

Show various event logs of IGMP Snooping

statistics

Show state and size of the buffers

igmp-snoop-event-hist-buf-name

Show contents of event-history buffer

Command Mode

- /exec

show ip igmp snooping explicit-tracking

show ip igmp snooping explicit-tracking [ vlan <vlan> | bridge-domain <bdid> ] [ __readonly__ TABLE_vlan <vlan-id> <grp-addr> <src-addr> <if-name> <host-addr> <uptime> <last-join> <expires> ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

explicit-tracking

Display explicit-tracking database for IGMPv3

vlan

(Optional) Display Vlan explicit-tracking database

vlan

(Optional) Specify VLAN

bridge-domain

(Optional) Display BD explicit-tracking database

bdid

(Optional) Specify BD

detail

(Optional) Display detail info regarding host and vPC

__readonly__

(Optional)

TABLE_vlan

(Optional)

vlan-id

(Optional)

grp-addr

(Optional)

src-addr

(Optional)

if-name

(Optional)

host-addr

(Optional)

uptime

(Optional)

last-join

(Optional)

expires

(Optional)

Command Mode

- /exec

show ip igmp snooping groups

show ip igmp snooping [ otv ] groups [ { <source> [ <group> ] } | { <group> [ <source> ] } ] [ vlan <vlan> ] [ detail ] [ summary ] [ __readonly__ { TABLE_vlan <vlan-id> <rports> <rtrPortFlag> <oifs> { TABLE_port <if-name> } { TABLE_rtrports <rport-if-name> } <raddr> { TABLE_source <source> } { TABLE_group <addr> <ver> <raddr> <rsf> <js> <g-mfdm> <old-host> <g-vpc> <static> <dynamic> <snoop-enabled> <omf-enabled> <group-count> <s-g-count> { TABLE_static_ports <static-if-name> } { TABLE_v2_ports <v2-if-name> <uptime> <expires> <gq-missed> } { TABLE_star_g_ports <star-g-if-name> <uptime> <expires> } { TABLE_source <source> <srsf> <s-mfdm> <s-vpc> <src-static> <src-dynamic> { TABLE_src_static_ports <src-static-if-name> } { TABLE_src_dynamic <dyn-if-name> <src-uptime> <src-expires> } } } } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

otv

(Optional) IGMP Snooping OTV information

groups

Display snooping information for group address

summary

(Optional) Display snooping group summary

group

(Optional) Multicast IP address of single group to display

source

(Optional) Source IP address

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

vlan

(Optional) Specify VLAN/BD

detail

(Optional) Display detailed information for the group

__readonly__

(Optional)

TABLE_vlan

(Optional)

vlan-id

(Optional)

rports

(Optional)

rtrPortFlag

(Optional)

oifs

(Optional)

TABLE_port

(Optional)

if-name

(Optional)

TABLE_rtrports

(Optional)

rport-if-name

(Optional)

raddr

(Optional)

TABLE_group

(Optional)

addr

(Optional)

ver

(Optional)

raddr

(Optional)

TABLE_source

(Optional)

source

(Optional)

rsf

(Optional)

js

(Optional)

g-mfdm

(Optional)

old-host

(Optional)

g-vpc

(Optional)

static

(Optional)

dynamic

(Optional)

snoop-enabled

(Optional)

omf-enabled

(Optional)

group-count

(Optional)

s-g-count

(Optional)

TABLE_static_ports

(Optional)

static-if-name

(Optional)

TABLE_v2_ports

(Optional)

v2-if-name

(Optional)

uptime

(Optional)

expires

(Optional)

gq-missed

(Optional)

TABLE_star_g_ports

(Optional)

star-g-if-name

(Optional)

uptime

(Optional)

expires

(Optional)

TABLE_source

(Optional)

source

(Optional)

srsf

(Optional)

s-mfdm

(Optional)

s-vpc

(Optional)

src-static

(Optional)

src-dynamic

(Optional)

TABLE_src_static_ports

(Optional)

src-static-if-name

(Optional)

TABLE_src_dynamic

(Optional)

dyn-if-name

(Optional)

src-uptime

(Optional)

src-expires

(Optional)

Command Mode

- /exec

show ip igmp snooping internal

show ip igmp snooping internal { ha | mfdm | ribs | route-txlist | memory }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

internal

Display IGMP snooping internal information

ha

Display IGMP snooping internal HA information

mfdm

Display IGMP snooping internal MFDM information

ribs

Display IGMP snooping internal RIB information

route-txlist

Display IGMP snooping internal route txlist information

memory

Display IGMP snooping internal address-space information

Command Mode

- /exec

show ip igmp snooping internal proxy-querier

show ip igmp snooping internal proxy-querier

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

internal

Display IGMP snooping internal information

proxy-querier

Display IGMP snooping internal proxy-querier information

Command Mode

- /exec

show ip igmp snooping lookup-mode

show ip igmp snooping lookup-mode [ vlan <vlan> ] [ __readonly__ { TABLE_global <configured> <operational> } { TABLE_vlan <vlan-id> <lookup> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

lookup-mode

IGMP Snooping lkup mode information

vlan

(Optional) Display VLAN/BD information

vlan

(Optional) Specify VLAN/BD

__readonly__

(Optional)

TABLE_global

(Optional)

configured

(Optional)

operational

(Optional)

TABLE_vlan

(Optional)

vlan-id

(Optional)

lookup

(Optional)

Command Mode

- /exec

show ip igmp snooping mac-oif

show ip igmp snooping mac-oif [ vlan <vlan> ] [ detail ] [ __readonly__ <totaloif> { TABLE_vlan <vlan-id> <count> <mac-addr> <oifs> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

mac-oif

IGMP Snooping static mac oif information

vlan

(Optional) Display VLAN/BD information

vlan

(Optional) Specify VLAN/BD

detail

(Optional) static mac oif detail, M2RIB oif info

__readonly__

(Optional)

totaloif

(Optional)

TABLE_vlan

(Optional)

vlan-id

(Optional)

count

(Optional)

mac-addr

(Optional)

oifs

(Optional)

Command Mode

- /exec

show ip igmp snooping mrouter

show ip igmp snooping mrouter [ otv ] [ vlan <vlan> | bridge-domain <bdid> ] [ detail ] [ __readonly__ TABLE_vlan <vlan-id> TABLE_intf <if-name> <type> <uptime> <expires> <static> <dynamic> <internal> <vpc> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

mrouter

Display multicast routers detected

otv

(Optional) IGMP Snooping OTV information

vlan

(Optional) Display VLAN multicast router information

vlan

(Optional) Specify VLAN

bridge-domain

(Optional) Display BD multicast router information

bdid

(Optional) Specify BD

detail

(Optional) Display detailed mrouter information

__readonly__

(Optional)

TABLE_vlan

(Optional)

vlan-id

(Optional)

TABLE_intf

(Optional)

if-name

(Optional)

type

(Optional)

uptime

(Optional)

expires

(Optional)

static

(Optional)

dynamic

(Optional)

internal

(Optional)

vpc

(Optional)

Command Mode

- /exec

show ip igmp snooping otv vlan brief

show ip igmp snooping otv vlan brief [ __readonly__ <vlan-id> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

otv

IGMP Snooping OTV information

vlan

Display VLAN/BD information

brief

Brief output

__readonly__

(Optional)

vlan-id

(Optional)

Command Mode

- /exec

show ip igmp snooping pw vlan brief

show ip igmp snooping pw vlan brief [ __readonly__ <vlan-id> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

pw

IGMP Snooping PW information

vlan

Display VLAN/BD information

brief

Brief output

__readonly__

(Optional)

vlan-id

(Optional)

Command Mode

- /exec

show ip igmp snooping querier

show ip igmp snooping querier [ vlan <vlan> | bridge-domain <bdid> ] [ detail ] [ __readonly__ TABLE_vlan <vlan-id> <qa> <ver> <expires> <qv> <qiod> <int> <qname> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

querier

Display snooping querier information

vlan

(Optional) Display VLAN IGMP snooping querier information

vlan

(Optional) Specify VLAN

bridge-domain

(Optional) Display BD IGMP snooping querier information

bdid

(Optional) Specify BD

detail

(Optional) Display detailed information

__readonly__

(Optional)

TABLE_vlan

(Optional)

vlan-id

(Optional)

qa

(Optional)

ver

(Optional)

expires

(Optional)

qv

(Optional)

qiod

(Optional)

qname

(Optional)

int

(Optional)

Command Mode

- /exec

show ip igmp snooping report statistics

show ip igmp snooping { report-policy | access-group } statistics [ vlan <vlan> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

report-policy

IGMP Report Policy

access-group

IGMP access-group

statistics

Policy statistics

vlan

(Optional) Display VLAN IGMP snooping policy statistics information

vlan

(Optional) Specify VLAN

Command Mode

- /exec

show ip igmp snooping snmp mib adminMode

show ip igmp snooping snmp mib adminMode [ __readonly__ <cisAdminMode> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

adminMode

Indicates the administrative snooping mode of IGMP Snooping feature

__readonly__

(Optional) Read Only

cisAdminMode

(Optional) mib object cisAdminMode

Command Mode

- /exec

show ip igmp snooping snmp mib aliasingMode

show ip igmp snooping snmp mib aliasingMode [ __readonly__ <cisAddressAliasingMode> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

aliasingMode

Indicates the current IGMP Address Aliasing Mode of the device

__readonly__

(Optional) Read Only

cisAddressAliasingMode

(Optional) mib object cisAddressAliasingMode

Command Mode

- /exec

show ip igmp snooping snmp mib cisV3ProcessEnableOperStatus

show ip igmp snooping snmp mib cisV3ProcessEnableOperStatus [ __readonly__ <cisV3ProcessEnabledOperStatus> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

cisV3ProcessEnableOperStatus

Indicates the current operational status of IGMP v3 processing in the system

__readonly__

(Optional) Read Only

cisV3ProcessEnabledOperStatus

(Optional) mib object cisV3ProcessEnabledOperStatus

Command Mode

- /exec

show ip igmp snooping snmp mib explicitTrackingTable

show ip igmp snooping snmp mib explicitTrackingTable [ vlan <cisVlanIndex-in> ] [ __readonly__ TABLE_cisVlanExplicitTrackingTable <cisVlanIndex-out> <cisVlanExplicitTrackingEnabled> <cisVlanExplicitTrackingLimit> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

explicitTrackingTable

Show mib table cisVlanExplicitTrackingTable

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

cisVlanIndex-in

(Optional) Specify VLAN/BD

__readonly__

(Optional)

TABLE_cisVlanExplicitTrackingTable

(Optional)

cisVlanIndex-out

(Optional) mib table index cisVlanIndex

cisVlanExplicitTrackingEnabled

(Optional) mib object cisVlanExplicitTrackingEnabled

cisVlanExplicitTrackingLimit

(Optional) mib object cisVlanExplicitTrackingLimit

Command Mode

- /exec

show ip igmp snooping snmp mib fallBackTime

show ip igmp snooping snmp mib fallBackTime [ __readonly__ <cisFallbackTime> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

fallBackTime

Indicates the time the IGMP address aliasing mode is fallback

__readonly__

(Optional) Read Only

cisFallbackTime

(Optional) mib object cisFallbackTime

Command Mode

- /exec

show ip igmp snooping snmp mib fastBlockEnabled

show ip igmp snooping snmp mib fastBlockEnabled [ __readonly__ <cisFastBlockEnabled> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

fastBlockEnabled

Indicates whether Fast-Block mechanism has been enabled for the system

__readonly__

(Optional) Read Only

cisFastBlockEnabled

(Optional) mib object cisFastBlockEnabled

Command Mode

- /exec

show ip igmp snooping snmp mib fastleaveenabled

show ip igmp snooping snmp mib fastleaveenabled [ __readonly__ <cisFastLeaveEnabled> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

fastleaveenabled

Check if fastleave is enabled

__readonly__

(Optional) Read Only

cisFastLeaveEnabled

(Optional) mib object cisFastLeaveEnabled

Command Mode

- /exec

show ip igmp snooping snmp mib filterStatsTable

show ip igmp snooping snmp mib filterStatsTable [ interface <ifIndex-in> vlan <cisFilterStatsVlanNumber-in> ] [ __readonly__ TABLE_cisFilterStatsTable <ifIndex-out> <cisFilterStatsVlanNumber-out> <cisFilterAccessGroupDenied> <cisFilterLimitDenied> <cisFilterTotalLimitDenied> <cisFilterMinVersionDenied> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

filterStatsTable

Display VLAN/BD Filter Group

interface

(Optional) Display interface

ifIndex-in

(Optional) Interface Index

vlan

(Optional) Display Interface access group VLAN/BD information

cisFilterStatsVlanNumber-in

(Optional) Specify VLAN/BD

__readonly__

(Optional)

TABLE_cisFilterStatsTable

(Optional)

ifIndex-out

(Optional) mib table index ifIndex

cisFilterStatsVlanNumber-out

(Optional) mib table index cisFilterStatsVlanNumber

cisFilterAccessGroupDenied

(Optional) mib object cisFilterAccessGroupDenied

cisFilterLimitDenied

(Optional) mib object cisFilterLimitDenied

cisFilterTotalLimitDenied

(Optional) mib object cisFilterTotalLimitDenied

cisFilterMinVersionDenied

(Optional) mib object cisFilterMinVersionDenied

Command Mode

- /exec

show ip igmp snooping snmp mib ifAccessGroupTable

show ip igmp snooping snmp mib ifAccessGroupTable [ interface <ifIndex-in> vlan <cisIfAccessGroupVlan-in> ] [ __readonly__ TABLE_cisIfAccessGroupTable <ifIndex-out> <cisIfAccessGroupVlan-out> <cisIfAccessGroupsChannelsAllowed> <cisIfAccessGroupStorageType> <cisIfAccessGroupRowStatus> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

ifAccessGroupTable

Display interface access group

interface

(Optional) Display interface

ifIndex-in

(Optional) Interface Index

vlan

(Optional) Display Interface access group VLAN/BD information

cisIfAccessGroupVlan-in

(Optional) Specify VLAN/BD

__readonly__

(Optional)

TABLE_cisIfAccessGroupTable

(Optional)

ifIndex-out

(Optional) mib table index ifIndex

cisIfAccessGroupVlan-out

(Optional) mib table index cisIfAccessGroupVlan

cisIfAccessGroupsChannelsAllowed

(Optional) mib object cisIfAccessGroupsChannelsAllowed

cisIfAccessGroupStorageType

(Optional) mib object cisIfAccessGroupStorageType

cisIfAccessGroupRowStatus

(Optional) mib object cisIfAccessGroupRowStatus

Command Mode

- /exec

show ip igmp snooping snmp mib ifConfigTable

show ip igmp snooping snmp mib ifConfigTable [ interface <ifIndex-in> ] [ __readonly__ TABLE_cisIfConfigTable <ifIndex-out> <cisIfTopoChangeFloodEnabled> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

ifConfigTable

Display interface configuration

interface

(Optional) Display interface

ifIndex-in

(Optional) Interface Index

__readonly__

(Optional)

TABLE_cisIfConfigTable

(Optional)

ifIndex-out

(Optional) mib table index ifIndex

cisIfTopoChangeFloodEnabled

(Optional) mib object cisIfTopoChangeFloodEnabled

Command Mode

- /exec

show ip igmp snooping snmp mib ifLimitTable

show ip igmp snooping snmp mib ifLimitTable [ interface <ifIndex-in> vlan <cisIfLimitVlanNumber-in> ] [ __readonly__ TABLE_cisIfLimitTable <ifIndex-out> <cisIfLimitVlanNumber-out> <cisIfLimitMax> <cisIfLimitExcludeAccessGrp> <cisIfLimitStorageType> <cisIfLimitRowStatus> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

ifLimitTable

Display interface configuration

interface

(Optional) Display interface

ifIndex-in

(Optional) Interface Index

vlan

(Optional) Display Interface Limit VLAN/BD informaition

cisIfLimitVlanNumber-in

(Optional) Specify VLAN/BD

__readonly__

(Optional)

TABLE_cisIfLimitTable

(Optional)

ifIndex-out

(Optional) mib table index ifIndex

cisIfLimitVlanNumber-out

(Optional) mib table index cisIfLimitVlanNumber

cisIfLimitMax

(Optional) mib object cisIfLimitMax

cisIfLimitExcludeAccessGrp

(Optional) mib object cisIfLimitExcludeAccessGrp

cisIfLimitStorageType

(Optional) mib object cisIfLimitStorageType

cisIfLimitRowStatus

(Optional) mib object cisIfLimitRowStatus

Command Mode

- /exec

show ip igmp snooping snmp mib ifLimitTotalTable

show ip igmp snooping snmp mib ifLimitTotalTable [ interface <ifIndex-in> ] [ __readonly__ TABLE_cisIfLimitTotalTable <ifIndex-out> <cisIfLimitTotalLimitMax> <cisIfLimitTotalExcludeAccessGrp> <cisIfLimitTotalStorageType> <cisIfLimitTotalRowStatus> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

ifLimitTotalTable

Display interface configuration

interface

(Optional) Display interface

ifIndex-in

(Optional) Interface Index

__readonly__

(Optional)

TABLE_cisIfLimitTotalTable

(Optional)

ifIndex-out

(Optional) mib table index ifIndex

cisIfLimitTotalLimitMax

(Optional) mib object cisIfLimitTotalLimitMax

cisIfLimitTotalExcludeAccessGrp

(Optional) mib object cisIfLimitTotalExcludeAccessGrp

cisIfLimitTotalStorageType

(Optional) mib object cisIfLimitTotalStorageType

cisIfLimitTotalRowStatus

(Optional) mib object cisIfLimitTotalRowStatus

Command Mode

- /exec

show ip igmp snooping snmp mib igmpsnoopingenabled

show ip igmp snooping snmp mib igmpsnoopingenabled [ __readonly__ <cisIgmpSnoopingEnabled> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

igmpsnoopingenabled

Check if IGMP snooping is enabled

__readonly__

(Optional) Read Only

cisIgmpSnoopingEnabled

(Optional) mib object cisIgmpSnoopingEnabled

Command Mode

- /exec

show ip igmp snooping snmp mib iterfaceStatsTable

show ip igmp snooping snmp mib iterfaceStatsTable [ interface <ifIndex-in> ] [ __readonly__ TABLE_cisInterfaceStatsTable <ifIndex-out> <cisTxGeneralQueries> <cisTxGroupSpecificQueries> <cisTxReports> <cisTxLeaves> <cisRxGeneralQueries> <cisRxGroupSpecificQueries> <cisRxReports> <cisRxLeaves> <cisRxValidPackets> <cisRxInvalidPackets> <cisRxOtherPackets> <cisRxMACGeneralQueries> <cisRxTopoNotifications> <cisV3Allows> <cisV3Blocks> <cisV3IsIncluded> <cisV3IsExcluded> <cisV3ToIncluded> <cisV3ToExcluded> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

iterfaceStatsTable

Display interface stats

interface

(Optional) Display interface information

ifIndex-in

(Optional) Interface Index

__readonly__

(Optional)

TABLE_cisInterfaceStatsTable

(Optional)

ifIndex-out

(Optional) mib table index ifIndex

cisTxGeneralQueries

(Optional) mib object cisTxGeneralQueries

cisTxGroupSpecificQueries

(Optional) mib object cisTxGroupSpecificQueries

cisTxReports

(Optional) mib object cisTxReports

cisTxLeaves

(Optional) mib object cisTxLeaves

cisRxGeneralQueries

(Optional) mib object cisRxGeneralQueries

cisRxGroupSpecificQueries

(Optional) mib object cisRxGroupSpecificQueries

cisRxReports

(Optional) mib object cisRxReports

cisRxLeaves

(Optional) mib object cisRxLeaves

cisRxValidPackets

(Optional) mib object cisRxValidPackets

cisRxInvalidPackets

(Optional) mib object cisRxInvalidPackets

cisRxOtherPackets

(Optional) mib object cisRxOtherPackets

cisRxMACGeneralQueries

(Optional) mib object cisRxMACGeneralQueries

cisRxTopoNotifications

(Optional) mib object cisRxTopoNotifications

cisV3Allows

(Optional) mib object cisV3Allows

cisV3Blocks

(Optional) mib object cisV3Blocks

cisV3IsIncluded

(Optional) mib object cisV3IsIncluded

cisV3IsExcluded

(Optional) mib object cisV3IsExcluded

cisV3ToIncluded

(Optional) mib object cisV3ToIncluded

cisV3ToExcluded

(Optional) mib object cisV3ToExcluded

Command Mode

- /exec

show ip igmp snooping snmp mib lastMemeberQueryCount

show ip igmp snooping snmp mib lastMemeberQueryCount [ __readonly__ <cisLastMemberQueryCount> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

lastMemeberQueryCount

Specifies the Last Member Query Count value of this device

__readonly__

(Optional) Read Only

cisLastMemberQueryCount

(Optional) mib object cisLastMemberQueryCount

Command Mode

- /exec

show ip igmp snooping snmp mib lastMemeberQueryInterval

show ip igmp snooping snmp mib lastMemeberQueryInterval [ __readonly__ <cisLastMemberQueryInterval> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

lastMemeberQueryInterval

Specifies the IGMP Last Member Query Interval of this device

__readonly__

(Optional) Read Only

cisLastMemberQueryInterval

(Optional) mib object cisLastMemberQueryInterval

Command Mode

- /exec

show ip igmp snooping snmp mib leaveQueryType

show ip igmp snooping snmp mib leaveQueryType [ __readonly__ <cisLeaveQueryType> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

leaveQueryType

Indicates type of leave query

__readonly__

(Optional) Read Only

cisLeaveQueryType

(Optional) mib object cisLeaveQueryType

Command Mode

- /exec

show ip igmp snooping snmp mib mcastGroupTable

show ip igmp snooping snmp mib mcastGroupTable [ vlan <cisMcastGroupVlanIndex-in> <cisMcastGroupAddressType-in> <cisMcastGroupAddress-in> ] [ __readonly__ TABLE_cisMcastGroupTable <cisMcastGroupVlanIndex-out> <cisMcastGroupAddressType-out> <cisMcastGroupAddress-out> <cisMcastGroupFilterMode> <cisMcastGroupIgmpVersion> <cisMcastGroupIncludeHostCount> <cisMcastGroupExcludeHostCount> <cisMcastGroupPortList> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

mcastGroupTable

Show mib table cisMcastGroupTable

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

cisMcastGroupVlanIndex-in

(Optional) Specify VLAN/BD

cisMcastGroupAddressType-in

(Optional) Address type

cisMcastGroupAddress-in

(Optional) Group address

__readonly__

(Optional)

TABLE_cisMcastGroupTable

(Optional)

cisMcastGroupVlanIndex-out

(Optional) mib table index cisMcastGroupVlanIndex

cisMcastGroupAddressType-out

(Optional) mib table index cisMcastGroupAddressType

cisMcastGroupAddress-out

(Optional) mib table index cisMcastGroupAddress

cisMcastGroupFilterMode

(Optional) mib object cisMcastGroupFilterMode

cisMcastGroupIgmpVersion

(Optional) mib object cisMcastGroupIgmpVersion

cisMcastGroupIncludeHostCount

(Optional) mib object cisMcastGroupIncludeHostCount

cisMcastGroupExcludeHostCount

(Optional) mib object cisMcastGroupExcludeHostCount

cisMcastGroupPortList

(Optional) mib object cisMcastGroupPortList

Command Mode

- /exec

show ip igmp snooping snmp mib mcastRouterCfgTable

show ip igmp snooping snmp mib mcastRouterCfgTable [ interface <ifIndex-in> vlan <cisMcastRouterVlanIndex-in> ] [ __readonly__ TABLE_cisMcastRouterCfgTable <ifIndex-out> <cisMcastRouterVlanIndex-out> <cisMcastRouterType> <cisMcastRouterRowStatus> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

mcastRouterCfgTable

show mib table cisMcastRouterCfgTable

interface

(Optional) Display Mcast Router Interface Information

ifIndex-in

(Optional) Specify the Mcast router interface

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

cisMcastRouterVlanIndex-in

(Optional) Specify VLAN/BD

__readonly__

(Optional)

TABLE_cisMcastRouterCfgTable

(Optional)

ifIndex-out

(Optional) mib table index ifIndex

cisMcastRouterVlanIndex-out

(Optional) mib table index cisMcastRouterVlanIndex

cisMcastRouterType

(Optional) mib object cisMcastRouterType

cisMcastRouterRowStatus

(Optional) mib object cisMcastRouterRowStatus

Command Mode

- /exec

show ip igmp snooping snmp mib mcastRouterConfigTable

show ip igmp snooping snmp mib mcastRouterConfigTable [ vlan <cisMcastRouterConfigVlanIndex-in> interface <ifIndex-in> ] [ __readonly__ TABLE_cisMcastRouterConfigTable <ifIndex-out> <cisMcastRouterConfigVlanIndex-out> <cisMcastRouterConfigRouterType> <cisMcastRouterConfigStorageType> <cisMcastRouterConfigRowStatus> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

mcastRouterConfigTable

show mib table cisMcastRouterConfigTable

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

cisMcastRouterConfigVlanIndex-in

(Optional) Specify VLAN/BD

interface

(Optional) Display Mcast Router Interface Information

ifIndex-in

(Optional) Specify the Mcast router interface index

__readonly__

(Optional)

TABLE_cisMcastRouterConfigTable

(Optional)

cisMcastRouterConfigVlanIndex-out

(Optional) mib table index cisMcastRouterConfigVlanIndex

ifIndex-out

(Optional) mib table index ifIndex

cisMcastRouterConfigRouterType

(Optional) mib object cisMcastRouterConfigRouterType

cisMcastRouterConfigStorageType

(Optional) mib object cisMcastRouterConfigStorageType

cisMcastRouterConfigRowStatus

(Optional) mib object cisMcastRouterConfigRowStatus

Command Mode

- /exec

show ip igmp snooping snmp mib multicastGroupConfigTable

show ip igmp snooping snmp mib multicastGroupConfigTable [ vlan <cisMulticastGroupConfVlanIndex-in> <cisMulticastGroupConfCeVlanIndex-in> <cisMulticastGroupConfAddressType-in> <cisMulticastGroupConfAddress-in> <cisMulticastGroupConfSourceAddress-in> <cisMulticastGroupConfPortRange-in> ] [ __readonly__ TABLE_cisMulticastGroupConfigTable <cisMulticastGroupConfVlanIndex-out> <cisMulticastGroupConfCeVlanIndex-out> <cisMulticastGroupConfAddressType-out> <cisMulticastGroupConfAddress-out> <cisMulticastGroupConfSourceAddress-out> <cisMulticastGroupConfPortRange-out> <cisMulticastGroupConfPortList> <cisMulticastGroupConfStorageType> <cisMulticastGroupConfRowStatus> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

multicastGroupConfigTable

show mib table cisMulticastGroupConfigTable

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

cisMulticastGroupConfVlanIndex-in

(Optional) Specify VLAN/BD

cisMulticastGroupConfCeVlanIndex-in

(Optional) Specify consumer edge VLAN/BD

cisMulticastGroupConfAddressType-in

(Optional) Group Address Type

cisMulticastGroupConfAddress-in

(Optional) Group address

cisMulticastGroupConfSourceAddress-in

(Optional) source address

cisMulticastGroupConfPortRange-in

(Optional) port Range

__readonly__

(Optional)

TABLE_cisMulticastGroupConfigTable

(Optional)

cisMulticastGroupConfVlanIndex-out

(Optional) mib table index cisMulticastGroupConfVlanIndex

cisMulticastGroupConfCeVlanIndex-out

(Optional) mib table index cisMulticastGroupConfCeVlanIndex

cisMulticastGroupConfAddressType-out

(Optional) mib table index cisMulticastGroupConfAddressType

cisMulticastGroupConfAddress-out

(Optional) mib table index cisMulticastGroupConfAddress

cisMulticastGroupConfSourceAddress-out

(Optional) mib table index cisMulticastGroupConfSourceAddress

cisMulticastGroupConfPortRange-out

(Optional) mib table index cisMulticastGroupConfPortRange

cisMulticastGroupConfPortList

(Optional) mib object cisMulticastGroupConfPortList

cisMulticastGroupConfStorageType

(Optional) mib object cisMulticastGroupConfStorageType

cisMulticastGroupConfRowStatus

(Optional) mib object index cisMulticastGroupConfRowStatus

Command Mode

- /exec

show ip igmp snooping snmp mib multicastGroupPortListTable

show ip igmp snooping snmp mib multicastGroupPortListTable [ vlan <cisMulticastGroupVlanIndex-in> <cisMulticastGroupCeVlanIndex-in> <cisMulticastGroupAddressType-in> <cisMulticastGroupAddress-in> <cisMulticastGroupSourceAddress-in> <cisMulticastGroupPortRangeIndex-in> ] [ __readonly__ TABLE_cisMulticastGroupPortListTable <cisMulticastGroupVlanIndex-out> <cisMulticastGroupCeVlanIndex-out> <cisMulticastGroupAddressType-out> <cisMulticastGroupAddress-out> <cisMulticastGroupSourceAddress-out> <cisMulticastGroupPortRangeIndex-out> <cisMulticastGroupPortList> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

multicastGroupPortListTable

show mib table multicastGroupPortListTable

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

cisMulticastGroupVlanIndex-in

(Optional) Specify VLAN/BD

cisMulticastGroupCeVlanIndex-in

(Optional) Specify consumer edge VLAN/BD

cisMulticastGroupAddressType-in

(Optional) Group Address Type

cisMulticastGroupAddress-in

(Optional) Group address

cisMulticastGroupSourceAddress-in

(Optional) source address

cisMulticastGroupPortRangeIndex-in

(Optional) port Range Index

__readonly__

(Optional)

TABLE_cisMulticastGroupPortListTable

(Optional)

cisMulticastGroupVlanIndex-out

(Optional) mib table index cisMulticastGroupVlanIndex

cisMulticastGroupCeVlanIndex-out

(Optional) mib table index cisMulticastGroupCeVlanIndex

cisMulticastGroupAddressType-out

(Optional) mib table index cisMulticastGroupAddressType

cisMulticastGroupAddress-out

(Optional) mib table index cisMulticastGroupAddress

cisMulticastGroupSourceAddress-out

(Optional) mib table index cisMulticastGroupSourceAddress

cisMulticastGroupPortRangeIndex-out

(Optional) mib table index cisMulticastGroupPortRangeIndex

cisMulticastGroupPortList

(Optional) mib object cisMulticastGroupPortList

Command Mode

- /exec

show ip igmp snooping snmp mib multicastGroupTable

show ip igmp snooping snmp mib multicastGroupTable [ vlan <cisMulticastGroupVlanIndex-in> <cisMulticastGroupCeVlanIndex-in> <cisMulticastGroupAddressType-in> <cisMulticastGroupAddress-in> <cisMulticastGroupSourceAddress-in> ] [ __readonly__ TABLE_cisMulticastGroupTable <cisMulticastGroupVlanIndex-out> <cisMulticastGroupCeVlanIndex-out> <cisMulticastGroupAddressType-out> <cisMulticastGroupAddress-out> <cisMulticastGroupSourceAddress-out> <cisMulticastGroupGroupType> <cisMulticastGroupIgmpVersion> <cisMulticastGroupSourceUpTime> <cisMulticastGroupSourceExpires> <cisMulticastGroupInclHostCount> <cisMulticastGroupExclHostCount> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

multicastGroupTable

show mib table multicastGroupTable

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

cisMulticastGroupVlanIndex-in

(Optional) Specify VLAN/BD

cisMulticastGroupCeVlanIndex-in

(Optional) Specify consumer edge VLAN/BD

cisMulticastGroupAddressType-in

(Optional) Group Address Type

cisMulticastGroupAddress-in

(Optional) Group address

cisMulticastGroupSourceAddress-in

(Optional) Source address

__readonly__

(Optional)

TABLE_cisMulticastGroupTable

(Optional)

cisMulticastGroupVlanIndex-out

(Optional) mib table index cisMulticastGroupVlanIndex

cisMulticastGroupCeVlanIndex-out

(Optional) mib table index cisMulticastGroupCeVlanIndex

cisMulticastGroupAddressType-out

(Optional) mib table index cisMulticastGroupAddressType

cisMulticastGroupAddress-out

(Optional) mib table index cisMulticastGroupAddress

cisMulticastGroupSourceAddress-out

(Optional) mib table index cisMulticastGroupSourceAddress

cisMulticastGroupGroupType

(Optional) mib object cisMulticastGroupGroupType

cisMulticastGroupIgmpVersion

(Optional) mib object cisMulticastGroupIgmpVersion

cisMulticastGroupSourceUpTime

(Optional) mib object cisMulticastGroupSourceUpTime

cisMulticastGroupSourceExpires

(Optional) mib object cisMulticastGroupSourceExpires

cisMulticastGroupInclHostCount

(Optional) mib object cisMulticastGroupInclHostCount

cisMulticastGroupExclHostCount

(Optional) mib object cisMulticastGroupExclHostCount

Command Mode

- /exec

show ip igmp snooping snmp mib operMode

show ip igmp snooping snmp mib operMode [ __readonly__ <cisOperMode> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

operMode

Indicates the operational snooping mode of the device

__readonly__

(Optional) Read Only

cisOperMode

(Optional) mib object cisOperMode

Command Mode

- /exec

show ip igmp snooping snmp mib querierTable

show ip igmp snooping snmp mib querierTable [ vlan <cisIgmpQuerierVlanIndex-in> ] [ __readonly__ TABLE_cisIgmpQuerierTable <cisIgmpQuerierVlanIndex-out> <cisIgmpQuerierEnabled> <cisIgmpQuerierState> <cisIgmpQuerierVersion> <cisIgmpQuerierAddressType> <cisIgmpQuerierAddress> <cisIgmpQuerierInterface> <cisIgmpQuerierTcnQueryCount> <cisIgmpQuerierTcnQueryInterval> <cisIgmpQuerierTimerExpiry> <cisIgmpQuerierMaxResponseTime> <cisIgmpQuerierQueryInterval> <cisIgmpQuerierAdminAddressType> <cisIgmpQuerierAdminAddress> <cisIgmpQuerierAdminVersion> <cisIgmpQuerierTcnQueryPending> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

querierTable

Show mib table cisIgmpQuerierTable

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

cisIgmpQuerierVlanIndex-in

(Optional) Specify VLAN/BD

__readonly__

(Optional)

TABLE_cisIgmpQuerierTable

(Optional)

cisIgmpQuerierVlanIndex-out

(Optional) mib table index cisIgmpQuerierVlanIndex

cisIgmpQuerierEnabled

(Optional) mib object cisIgmpQuerierEnabled

cisIgmpQuerierState

(Optional) mib object cisIgmpQuerierState

cisIgmpQuerierVersion

(Optional) mib object cisIgmpQuerierVersion

cisIgmpQuerierAddressType

(Optional) mib object cisIgmpQuerierAddressType

cisIgmpQuerierAddress

(Optional) mib object cisIgmpQuerierAddress

cisIgmpQuerierInterface

(Optional) mib object cisIgmpQuerierInterface

cisIgmpQuerierTcnQueryCount

(Optional) mib object cisIgmpQuerierTcnQueryCount

cisIgmpQuerierTcnQueryInterval

(Optional) mib object cisIgmpQuerierTcnQueryInterval

cisIgmpQuerierTimerExpiry

(Optional) mib object cisIgmpQuerierTimerExpiry

cisIgmpQuerierMaxResponseTime

(Optional) mib object cisIgmpQuerierMaxResponseTime

cisIgmpQuerierQueryInterval

(Optional) mib object cisIgmpQuerierQueryInterval

cisIgmpQuerierAdminAddressType

(Optional) mib object cisIgmpQuerierAdminAddressType

cisIgmpQuerierAdminAddress

(Optional) mib object cisIgmpQuerierAdminAddress

cisIgmpQuerierAdminVersion

(Optional) mib object cisIgmpQuerierAdminVersion

cisIgmpQuerierTcnQueryPending

(Optional) mib object cisIgmpQuerierTcnQueryPending

Command Mode

- /exec

show ip igmp snooping snmp mib reportsuppressionenabled

show ip igmp snooping snmp mib reportsuppressionenabled [ __readonly__ <cisReportSuppressionEnabled> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

reportsuppressionenabled

Check if reportsuppression is enabled

__readonly__

(Optional) Read Only

cisReportSuppressionEnabled

(Optional) mib object cisReportSuppressionEnabled

Command Mode

- /exec

show ip igmp snooping snmp mib robustnessVariable

show ip igmp snooping snmp mib robustnessVariable [ __readonly__ <cisRobustnessVariable> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

robustnessVariable

Specifies the Robustness Variable of this device

__readonly__

(Optional) Read Only

cisRobustnessVariable

(Optional) mib object cisRobustnessVariable

Command Mode

- /exec

show ip igmp snooping snmp mib routerAlertCheckEnabled

show ip igmp snooping snmp mib routerAlertCheckEnabled [ __readonly__ <cisLastMemberQueryCount> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

routerAlertCheckEnabled

Specifies whether checking of Router-Alert option is enabled for IGMP traffic in the system

__readonly__

(Optional) Read Only

cisLastMemberQueryCount

(Optional) mib object cisLastMemberQueryCount

Command Mode

- /exec

show ip igmp snooping snmp mib sourceOnlyEntryAgingTime

show ip igmp snooping snmp mib sourceOnlyEntryAgingTime [ __readonly__ <cisSourceOnlyEntryAgingTime> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

sourceOnlyEntryAgingTime

Specifies the aging time in seconds for Source Only multicast entries

__readonly__

(Optional) Read Only

cisSourceOnlyEntryAgingTime

(Optional) mib object cisSourceOnlyEntryAgingTime

Command Mode

- /exec

show ip igmp snooping snmp mib sourceOnlyLearningEnabled

show ip igmp snooping snmp mib sourceOnlyLearningEnabled [ __readonly__ <cisSourceOnlyLearningEnabled> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

sourceOnlyLearningEnabled

Specifies whether Source Only multicast entries are learned by IGMP Snooping or not

__readonly__

(Optional) Read Only

cisSourceOnlyLearningEnabled

(Optional) mib object cisSourceOnlyLearningEnabled

Command Mode

- /exec

show ip igmp snooping snmp mib tcnFloodQueryCount

show ip igmp snooping snmp mib tcnFloodQueryCount [ __readonly__ <cisTopoChangeFloodQueryCount> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

tcnFloodQueryCount

Specifies the flooding period for multicast traffic upon receiving Topology Change Notifications

__readonly__

(Optional) Read Only

cisTopoChangeFloodQueryCount

(Optional) mib object cisTopoChangeFloodQueryCount

Command Mode

- /exec

show ip igmp snooping snmp mib timeToLiveCheckEnabled

show ip igmp snooping snmp mib timeToLiveCheckEnabled [ __readonly__ <cisTimeToLiveCheckEnabled> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

timeToLiveCheckEnabled

Specifies whether Time-To-Live (TTL) check is enabled when processing IGMP packets in the system

__readonly__

(Optional) Read Only

cisTimeToLiveCheckEnabled

(Optional) mib object cisTimeToLiveCheckEnabled

Command Mode

- /exec

show ip igmp snooping snmp mib topoChanageQuerySolicitEnabled

show ip igmp snooping snmp mib topoChanageQuerySolicitEnabled [ __readonly__ <cisTopoChangeQuerySolicitEnabled> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

topoChanageQuerySolicitEnabled

Specifies whether the device running IGMP Snooping will solicit IGMP General Queries from the Querier upon receiving a TCN

__readonly__

(Optional) Read Only

cisTopoChangeQuerySolicitEnabled

(Optional) mib object cisTopoChangeQuerySolicitEnabled

Command Mode

- /exec

show ip igmp snooping snmp mib v3ProcessEnabledAdminStatus

show ip igmp snooping snmp mib v3ProcessEnabledAdminStatus [ __readonly__ <cisV3ProcessEnabledAdminStatus> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

v3ProcessEnabledAdminStatus

Indicates the administrative status of IGMP v3 processing in the system

__readonly__

(Optional) Read Only

cisV3ProcessEnabledAdminStatus

(Optional) mib object cisV3ProcessEnabledAdminStatus

Command Mode

- /exec

show ip igmp snooping snmp mib v3SnoopingSupport

show ip igmp snooping snmp mib v3SnoopingSupport [ __readonly__ <cisV3SnoopingSupport> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

v3SnoopingSupport

Indicates IGMP Snooping support for IGMPv3

__readonly__

(Optional) Read Only

cisV3SnoopingSupport

(Optional) mib object cisV3SnoopingSupport

Command Mode

- /exec

show ip igmp snooping snmp mib vlanFilterConfigTable

show ip igmp snooping snmp mib vlanFilterConfigTable [ vlan <cisVlanIndex-in> ] [ __readonly__ TABLE_cisVlanFilterConfigTable <cisVlanIndex-out> <cisVlanFilterAccessGroup> <cisVlanFilterLimitMax> <cisVlanFilterLimitExclAccessGrp> <cisVlanFilterMinVersionAllowed> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

vlanFilterConfigTable

Display VLAN/BD Filter Group

vlan

(Optional) Display Interface access group VLAN/BD information

cisVlanIndex-in

(Optional) Specify VLAN/BD

__readonly__

(Optional)

TABLE_cisVlanFilterConfigTable

(Optional)

cisVlanIndex-out

(Optional) mib talbe index cisVlanIndex>

cisVlanFilterAccessGroup

(Optional) mib table index cisVlanFilterAccessGroup

cisVlanFilterLimitMax

(Optional) mib object cisVlanFilterLimitMax

cisVlanFilterLimitExclAccessGrp

(Optional) mib object cisVlanFilterLimitExclAccessGrp

cisVlanFilterMinVersionAllowed

(Optional) mib object cisVlanFilterMinVersionAllowed

Command Mode

- /exec

show ip igmp snooping snmp mib vlanconfigtable

show ip igmp snooping snmp mib vlanconfigtable [ vlan <cisVlanIndex-in> ] [ __readonly__ TABLE_cisVlanConfigTable <cisVlanIndex-out> <cisVlanIgmpSnoopingEnabled> <cisVlanFastLeaveEnabled> <cisVlanIgmpSnoopingOperMode> <cisVlanIgmpSnoopingLearningMode> <cisVlanReportSuppressionEnabled> <cisVlanLeaveQueryInterval> <cisVlanLastMemberQueryCount> <cisVlanRobustnessVariable> <cisVlanTimeToLiveCheckEnabled> <cisVlanRouterAlertCheckEnabled> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

snmp

Show SNMP

mib

Show MIB table

vlanconfigtable

Show mib table cisVlanConfigTable

vlan

(Optional) Display VLAN/BD IGMP snooping membership information

cisVlanIndex-in

(Optional) Specify VLAN/BD

__readonly__

(Optional)

TABLE_cisVlanConfigTable

(Optional)

cisVlanIndex-out

(Optional) mib table index cisVlanIndex

cisVlanIgmpSnoopingEnabled

(Optional) mib object cisVlanIgmpSnoopingEnabled

cisVlanFastLeaveEnabled

(Optional) mib object cisVlanFastLeaveEnabled

cisVlanIgmpSnoopingOperMode

(Optional) mib object cisVlanIgmpSnoopingOperMode

cisVlanIgmpSnoopingLearningMode

(Optional) mib object cisVlanIgmpSnoopingLearningMode

cisVlanReportSuppressionEnabled

(Optional) mib object cisVlanReportSuppressionEnabled

cisVlanLeaveQueryInterval

(Optional) mib object cisVlanLeaveQueryInterval

cisVlanLastMemberQueryCount

(Optional) mib object cisVlanLastMemberQueryCount

cisVlanRobustnessVariable

(Optional) mib object cisVlanRobustnessVariable

cisVlanTimeToLiveCheckEnabled

(Optional) mib object cisVlanTimeToLiveCheckEnabled

cisVlanRouterAlertCheckEnabled

(Optional) mib object cisVlanRouterAlertCheckEnabled

Command Mode

- /exec

show ip igmp snooping statistics

show ip igmp snooping statistics [ global | vlan <vlan> | bridge-domain <bdid> ] [ __readonly__ <pr> <inv_pkt> <pnv> <pf> <vpcdrqs> <vpcdrqr> <vpcdrqf> <vpcdrus> <vpcdrur> <vpcdruf> <vpccfssf> <vpccfsrs> <vpccfsrr> <vpccfsrf> <vpccfsrfp> <vpccfsurls> <vpccfsurlr> <vpccfsurlf> <vpccfsrls> <vpccfsrlr> <vpccfsrlf> <inv_iod> <stptcnr> <imapif> <mfreqr> <mfcmps> <mfdgcmps> <bufsnt> <bufackr> { TABLE_vlan <vlan-id> <ut> <vpr> <v1rr> <v2rr> <v3rr> <v1qr> <v2qr> <v3qr> <v2lr> <phr> <irr> <iqr> <v1rs> <v2rs> <v2ls> <v3gs> <vmr> <upr> <qo> <v2ro> <v2lo> <v3ro> <vpsr> <str> <mps> <mpr> <mpe> <cps> <cpr> <cpe> <repflooded> <repfwded> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

statistics

Display packet/error counter statistics

global

(Optional) Display global statistics

vlan

(Optional) Display VLAN statistics

vlan

(Optional) Specify VLAN

bridge-domain

(Optional) Display BD statistics

bdid

(Optional) Specify BD

__readonly__

(Optional)

pr

(Optional)

inv_pkt

(Optional)

pnv

(Optional)

pf

(Optional)

vpcdrqs

(Optional)

vpcdrqr

(Optional)

vpcdrqf

(Optional)

vpcdrus

(Optional)

vpcdrur

(Optional)

vpcdruf

(Optional)

vpccfssf

(Optional)

vpccfsrs

(Optional)

vpccfsrr

(Optional)

vpccfsrf

(Optional)

vpccfsrfp

(Optional)

vpccfsurls

(Optional)

vpccfsurlr

(Optional)

vpccfsurlf

(Optional)

vpccfsrls

(Optional)

vpccfsrlr

(Optional)

vpccfsrlf

(Optional)

inv_iod

(Optional)

stptcnr

(Optional)

imapif

(Optional)

mfreqr

(Optional)

mfcmps

(Optional)

mfdgcmps

(Optional)

bufsnt

(Optional)

bufackr

(Optional)

TABLE_vlan

(Optional)

vlan-id

(Optional)

ut

(Optional)

vpr

(Optional)

v1rr

(Optional)

v2rr

(Optional)

v3rr

(Optional)

v1qr

(Optional)

v2qr

(Optional)

v3qr

(Optional)

v2lr

(Optional)

phr

(Optional)

irr

(Optional)

iqr

(Optional)

v1rs

(Optional)

v2rs

(Optional)

v2ls

(Optional)

v3gs

(Optional)

vmr

(Optional)

upr

(Optional)

qo

(Optional)

v2ro

(Optional)

v2lo

(Optional)

v3ro

(Optional)

vpsr

(Optional)

str

(Optional)

cps

(Optional)

cpr

(Optional)

cpe

(Optional)

mps

(Optional)

mpr

(Optional)

mpe

(Optional)

repflooded

(Optional)

repfwded

(Optional)

Command Mode

- /exec

show ip igmp vrf all

show ip igmp vrf all [ __readonly__ { TABLE_vrfname <vrf-name> <vrf-id> <instance> <work-in-txlist> } { TABLE_vrfid <vrf-name-i> <vrf-id-i> <instance-i> <work-in-txlist-i> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

igmp

Display IGMP status and configuration

vrf

Display per-VRF information

all

Display information for all VRFs

__readonly__

(Optional)

TABLE_vrfname

(Optional)

vrf-name

(Optional)

vrf-id

(Optional)

instance

(Optional)

work-in-txlist

(Optional)

TABLE_vrfid

(Optional)

vrf-name-i

(Optional)

vrf-id-i

(Optional)

instance-i

(Optional)

work-in-txlist-i

(Optional)

Command Mode

- /exec

show ip interface

show ip interface { { { brief [ include-secondary ] } | [ <interface> ] | [ <ip-addr> ] } [ operational ] [ vaddr ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } [ __readonly__ [ TABLE_vrf <vrf-name-out> ] [ TABLE_intf <intf-name> <proto-state> <link-state> <admin-state> <iod> <prefix> <subnet> <masklen> [ TABLE_secondary_address <prefix1> <subnet1> <masklen1> ] [ <num-addr> ] [ <vaddr-client> ] [ <vaddr-prefix> ] [ <vaddr-subnet> ] [ <vaddr-masklen> ] [ <num-vaddr> ] [ <unnum-intf> ] [ <ip-disabled> ] [ <bcast-addr> ] [ <maddr> ] [ <num-maddr> ] [ <mtu> ] [ <pref> ] [ <tag> ] [ <proxy-arp> ] [ <lcl-proxy-arp> ] [ <mrouting> ] [ <icmp-redirect> ] [ <dir-bcast> ] [ <ip-unreach> ] [ <port-unreach> ] [ <urpf-mode> ] [ <ip-ls-type> ] [ <urpf-acl> ] [ <pbr-in> ] [ <pbr-out> ] [ <acl-in> ] [ <acl-out> ] [ <stats-last-reset> ] [ <upkt-sent> ] [ <upkt-recv> ] [ <upkt-fwd> ] [ <upkt-orig> ] [ <upkt-consumed> ] [ <ubyte-sent> ] [ <ubyte-recv> ] [ <ubyte-fwd> ] [ <ubyte-orig> ] [ <ubyte-consumed> ] [ <mpkt-sent> ] [ <mpkt-recv> ] [ <mpkt-fwd> ] [ <mpkt-orig> ] [ <mpkt-consumed> ] [ <mbyte-sent> ] [ <mbyte-recv> ] [ <mbyte-fwd> ] [ <mbyte-orig> ] [ <mbyte-consumed> ] [ <bpkt-sent> ] [ <bpkt-recv> ] [ <bpkt-fwd> ] [ <bpkt-orig> ] [ <bpkt-consumed> ] [ <bbyte-sent> ] [ <bbyte-recv> ] [ <bbyte-fwd> ] [ <bbyte-orig> ] [ <bbyte-consumed> ] [ <lpkt-sent> ] [ <lpkt-recv> ] [ <lpkt-fwd> ] [ <lpkt-orig> ] [ <lpkt-consumed> ] [ <lbyte-sent> ] [ <lbyte-recv> ] [ <lbyte-fwd> ] [ <lbyte-orig> ] [ <lbyte-consumed> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

interface

Display IP related interface information

brief

Display summary of IP interface status and configuration

include-secondary

(Optional) Display summary of all IP addresses

operational

(Optional) Display only interfaces that are administratively enabled

interface

(Optional) Interface name to display

ip-addr

(Optional) Display interface for local IP address

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display all VRFs

vaddr

(Optional) Display virtual IP addresses as well

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_intf

(Optional)

intf-name

(Optional)

iod

(Optional)

prefix

(Optional)

proto-state

(Optional)

link-state

(Optional)

admin-state

(Optional)

subnet

(Optional)

masklen

(Optional)

TABLE_secondary_address

(Optional)

prefix1

(Optional)

subnet1

(Optional)

masklen1

(Optional)

num-addr

(Optional)

vaddr-client

(Optional)

vaddr-prefix

(Optional)

vaddr-subnet

(Optional)

vaddr-masklen

(Optional)

num-vaddr

(Optional)

unnum-intf

(Optional)

ip-disabled

(Optional)

bcast-addr

(Optional)

maddr

(Optional)

num-maddr

(Optional)

mtu

(Optional)

pref

(Optional)

tag

(Optional)

proxy-arp

(Optional)

lcl-proxy-arp

(Optional)

mrouting

(Optional)

icmp-redirect

(Optional)

dir-bcast

(Optional)

ip-unreach

(Optional)

port-unreach

(Optional)

urpf-mode

(Optional)

ip-ls-type

(Optional)

urpf-acl

(Optional)

pbr-in

(Optional)

pbr-out

(Optional)

acl-in

(Optional)

acl-out

(Optional)

stats-last-reset

(Optional)

upkt-sent

(Optional)

upkt-recv

(Optional)

upkt-fwd

(Optional)

upkt-orig

(Optional)

upkt-consumed

(Optional)

ubyte-sent

(Optional)

ubyte-recv

(Optional)

ubyte-fwd

(Optional)

ubyte-orig

(Optional)

ubyte-consumed

(Optional)

mpkt-sent

(Optional)

mpkt-recv

(Optional)

mpkt-fwd

(Optional)

mpkt-orig

(Optional)

mpkt-consumed

(Optional)

mbyte-sent

(Optional)

mbyte-recv

(Optional)

mbyte-fwd

(Optional)

mbyte-orig

(Optional)

mbyte-consumed

(Optional)

bpkt-sent

(Optional)

bpkt-recv

(Optional)

bpkt-fwd

(Optional)

bpkt-orig

(Optional)

bpkt-consumed

(Optional)

bbyte-sent

(Optional)

bbyte-recv

(Optional)

bbyte-fwd

(Optional)

bbyte-orig

(Optional)

bbyte-consumed

(Optional)

lpkt-sent

(Optional)

lpkt-recv

(Optional)

lpkt-fwd

(Optional)

lpkt-orig

(Optional)

lpkt-consumed

(Optional)

lbyte-sent

(Optional)

lbyte-recv

(Optional)

lbyte-fwd

(Optional)

lbyte-orig

(Optional)

lbyte-consumed

(Optional)

Command Mode

- /exec

show ip internal

show ip internal { ppf | { { acl | pbr } { status [ detail ] | interface <interface> [ { ingress | egress } ] } } }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

internal

Display internal IP information

acl

Show info for IP software ACL

pbr

Show info for IP software route-maps

status

Show IP Software Acl status

detail

(Optional) Show detailed information

ppf

Show acl ppf internal info

interface

Display interface acl info

interface

Interface for which info is required

ingress

(Optional) Only ingress Direction

egress

(Optional) Only on Egress Direction

Command Mode

- /exec

show ip internal bfd data

show ip internal bfd data [ { vrf { <vrf-name> | <vrf-known-name> | all } | interface <interface> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

internal

Commands for internal use

bfd

show bfd related internal information

data

bfd internal data structure

vrf

(Optional) Display per-VRF information

all

(Optional) Display all VRFs

interface

(Optional) Display interface related bfd information

interface

(Optional) Interface for which bfd info is required

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show ip internal context array

show ip internal [ api ] context array

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

internal

Commands for internal use

api

(Optional) Show api values

context

Display context info

array

Print the array which stores context ptrs

Command Mode

- /exec

show ip internal event-history

show ip internal event-history { errors | msgs | ipc | ha | log | ppf | cli | vrf-errors | arp-miss | snmp | static-rt | lcache-err | lcache-trace | pkt-buffer | objstr }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

internal

Commands for internal use

event-history

Show various event logs of IP

errors

Show error logs of IP

msgs

Show various message logs of IP

log

Show syslog message of IP

ipc

Show ipc debug message of IP

snmp

Show snmp debug message of IP

ha

Show ha debug message of IP

ppf

Show ppf debug message of IP

cli

Show cli interaction debug messages for IP

vrf-errors

Show vrf related errors

arp-miss

Show arp miss debug message of IP

static-rt

Show ip static route events

lcache-err

Show lcache error message

lcache-trace

Show lcache trace message

pkt-buffer

Show ip packet buffer events

objstr

Show ip Object Store logs

Command Mode

- /exec

show ip internal event-history bfd

show ip internal event-history bfd

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

internal

Commands for internal use

event-history

Show various event logs of IP

bfd

Show bfd related event history

Command Mode

- /exec

show ip internal event-history buffer-size

show ip internal event-history buffer-size { errors | log | ipc | snmp | ha | ppf | cli | vrf-errors | arp-miss | static-rt | pkt-buffer | all }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

internal

Commands for internal use

event-history

various event logs of IP

buffer-size

Show current size of the buffers

errors

Show error logs buffer size of IP

log

Show syslog message buffer size of IP

ipc

Show ipc debug message buffer size of IP

snmp

Show snmp debug message buffer size of IP

ha

Show ha debug message buffer size of IP

ppf

Show ppf debug message buffer size of IP

cli

Show cli interaction debug messages buffer size for IP

vrf-errors

Show vrf related errors buffer size

arp-miss

Show arp miss debug message buffer size of IP

static-rt

Show ip static events buffer size

pkt-buffer

Show packet bufffer events buffer size

all

Show sizes of all event history buffers

Command Mode

- /exec

show ip internal hmm

show ip internal hmm

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

internal

Commands for internal use

hmm

HMM info

Command Mode

- /exec

show ip internal igmp-snoop-stats

show ip internal igmp-snoop-stats

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

internal

Commands for internal use

igmp-snoop-stats

IP IGMP SNOOP Statistics

Command Mode

- /exec

show ip internal info

show ip internal info [ unnumbered | directed-broadcast ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

internal

Commands for internal use

info

Commands for internal use

unnumbered

(Optional) dump ip unnumberd data struct

directed-broadcast

(Optional) directed broadcast pt

Command Mode

- /exec

show ip internal info interface

show ip internal info interface [ iod <if_iod> | <interface> | all ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

internal

Commands for internal use

info

Commands for internal use

interface

Display IP related interface information

interface

(Optional) Interface name to display

iod

(Optional) If-ordinal of interface

if_iod

(Optional) If-ordinal of interface

all

(Optional) display info for all interfaces

Command Mode

- /exec

show ip internal mem

show ip internal { { mem-stats [ shared | all ] [ no-libs ] [ detail ] } | boot-info }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

internal

Display internal IP information

mem-stats

Show memory allocation statistics

shared

(Optional) Display shared memory statistics

all

(Optional) Display private and shared memory statistics

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

boot-info

Show boot-time ip configuration

Command Mode

- /exec

show ip lisp

show { ip | ipv6 } lisp [ database ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

lisp

LISP show commands

database

(Optional) Show EID-prefixes configured for site

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show ip lisp data-cache

show ip lisp data-cache [ <eid> ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

lisp

LISP show commands

data-cache

Display EID-to-RLOC data cache mapping in this ITR

eid

(Optional) Display mapping for IP destination EID

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show ip lisp locator-hash

{ { show ip lisp locator-hash { <eid-prefix> | { <source-eid> <dest-eid> } } [ vrf { <vrf-name> | <vrf-known-name> } ] } | { show ipv6 lisp locator-hash { <eid-prefix6> | { <source-eid6> <dest-eid6> } } [ vrf { <vrf-name> | <vrf-known-name> } ] } }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

lisp

LISP show commands

locator-hash

Display source and dest locators for EID pair

source-eid

Source IPv4 endpoint identifier (EID)

dest-eid

Destination IPv4 endpoint identifier (EID)

eid-prefix

Display exact match for IP EID-prefix entry

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show ip lisp map-cache

{ { show ip lisp map-cache [ <eid> | <eid-prefix> | detail ] [ vrf { <vrf-name> | <vrf-known-name> } ] } | { show ipv6 lisp map-cache [ <eid6> | <eid-prefix6> | detail ] [ vrf { <vrf-name> | <vrf-known-name> } ] } }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

lisp

LISP show commands

map-cache

Display EID-to-RLOC cache mapping in this ITR

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

eid

(Optional) Display mapping for IP destination EID

eid-prefix

(Optional) Display exact match for IP EID-prefix entry

detail

(Optional) Display entire map-cache in long format

Command Mode

- /exec

show ip lisp statistics

show { ip | ipv6 } lisp statistics [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

lisp

LISP show commands

statistics

Display global LISP statistics

vrf

(Optional) Display statistics information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show ip lisp translate-cache

{ show ip lisp translate-cache [ <nrEID> ] } | { show ipv6 lisp translate-cache [ <nrEID6> ] }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

lisp

LISP show commands

translate-cache

Display configured translation cache

nrEID

(Optional) IPv4 address of inside non-routable EID

nrEID6

(Optional) IPv6 address of inside non-routable EID

Command Mode

- /exec

show ip lisp version-hash

show { ip | ipv6 } lisp version-hash { <eid-prefix> | <eid-prefix6> }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

lisp

LISP show commands

version-hash

Display version-hash for EID-record

eid-prefix

Local IP EID-prefix from database-mapping command

Command Mode

- /exec

show ip load-sharing

show ip load-sharing [ __readonly__ { <univer-id-ran-seed> [ <l3-msg-load> ] [ <l34-msg-load> ] [ <dest-addr-load> ] [ <src-dst-ip-gre> ] [ <bad-load> ] } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Configure IP features

load-sharing

Display global loadbalance info

__readonly__

(Optional)

univer-id-ran-seed

(Optional)

l3-msg-load

(Optional)

l34-msg-load

(Optional)

dest-addr-load

(Optional)

src-dst-ip-gre

(Optional)

bad-load

(Optional)

Command Mode

- /exec

show ip local-pt

show ip local-pt [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

local-pt

Display local ip address ptree

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show ip local policy

show ip local policy [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_pbr <interface> <rmap> <status> <vrf_name> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

local

IP local options

policy

Policy routing

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_pbr

(Optional)

interface

(Optional)

rmap

(Optional)

status

(Optional)

vrf_name

(Optional)

Command Mode

- /exec

show ip logging

show ip logging [ hash ] [ __readonly__ ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

logging

Display IP policy logging table

hash

(Optional) logging hash data

__readonly__

(Optional)

Command Mode

- /exec

show ip mbgp

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ { ipv4 { unicast | multicast | mdt } | all } ] } } [ <ip-addr> [ <ip-mask> [ longer-prefixes ] ] | <ip-prefix> [ longer-prefixes ] ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ip-addr

(Optional) Display one particular network from the BRIB in detail

ip-mask

(Optional) Mask for one particular prefix in the BRIB

ip-prefix

(Optional) Display one particular prefix from the BRIB in detail

longer-prefixes

(Optional) Display route and more specific routes

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

mdt

(Optional) Display BGP information for multicast distribution tree

all

(Optional) Display BGP information for all address families

Command Mode

- /exec

show ip mbgp

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ { ipv4 { unicast | multicast } | all } ] } } { route-map { <rmap-name> | <rmap-name> } | filter-list { <fltrlist-name> | <test_pol_name> } | { community-list { <commlist-name> | <test_pol_name> } | extcommunity-list { <extcommlist-name> | <test_pol_name> } } [ exact-match ] } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

route-map

Display routes matching the route-map

rmap-name

Route-map name

rmap-name

Known route-map name

filter-list

Display routes matching the filter-list

fltrlist-name

Name of filter-list

community-list

Display routes matching the community-list

extcommunity-list

Display routes matching the extcommunity-list

commlist-name

Name of community-list

extcommlist-name

Name of extcommunity-list

test_pol_name

An existing test-list policy

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

all

(Optional) Display BGP information for all address families

exact-match

(Optional) Exact match of the communities

Command Mode

- /exec

show ip mbgp community

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ { ipv4 { unicast | multicast } | all } ] } } community { <regexp-str> | { { <comm-id> | <wellknown-id> } + [ exact-match ] } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display BGP information for all address families

community

Display routes matching the BGP communities

regexp-str

Regular expression to match the communities

comm-id

BGP community value

wellknown-id

BGP wellknown community

exact-match

(Optional) Exact match of the communities

Command Mode

- /exec

show ip mbgp dampening

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ { ipv4 { unicast | multicast } | all } ] } } dampening { dampened-paths [ regexp <regexp-str> ] | flap-statistics | parameters | history-paths [ regexp <regexp-str> ] } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

dampening

Display dampening info

dampened-paths

Display all dampened paths

flap-statistics

Display flap statistics for routes

parameters

Display dampening parameters

history-paths

Display all history paths

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

all

(Optional) Display BGP information for all address families

regexp

(Optional) Display routes matching the AS path regular expression

regexp-str

(Optional) Regular expression to match the AS paths

Command Mode

- /exec

show ip mbgp extcommunity

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ { ipv4 { unicast | multicast } | all } ] } } extcommunity { <regexp-str> | { { 4byteas-generic { transitive <ext-comm-gen-trans> | non-transitive <ext-comm-gen-nontrans> } } + [ exact-match ] } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display BGP information for all address families

extcommunity

Display routes matching the BGP extcommunities

4byteas-generic

Generic extended community

transitive

Transitive extcommunity

non-transitive

Non-Transitive extcommunity

regexp-str

Regular expression to match the extcommunities

ext-comm-gen-trans

Extcommunity number aa4:nn format

ext-comm-gen-nontrans

Extcommunity number aa4:nn format

exact-match

(Optional) Exact match of the extcommunities

Command Mode

- /exec

show ip mbgp flap-statistics

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ { ipv4 { unicast | multicast } | all } ] } } flap-statistics [ <ip-prefix> | <ip-addr> [ <ip-mask> ] ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

flap-statistics

Display route flap statistics

ip-prefix

(Optional) Display flap statistics for one prefix

ip-addr

(Optional) Display flap statistics for one network

ip-mask

(Optional) Network mask

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

all

(Optional) Display BGP information for all address families

Command Mode

- /exec

show ip mbgp neighbors

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ { ipv4 { unicast | multicast } | all } ] } } neighbors { [ { <neighbor-id> | <ipv6-neighbor-id> } [ routes [ advertised | received | dampened ] | advertised-routes | received-routes | paths | flap-statistics ] ] | <neighbor-prefix-id> | <ipv6-neighbor-prefix-id> } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

neighbors

Display all configured BGP neighbors

neighbor-id

(Optional) Display one particular BGP neighbor

neighbor-prefix-id

Display details for a prefix peering

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

all

(Optional) Display BGP information for all address families

routes

(Optional) Display all routes advertised/received to/from peer

advertised

(Optional) Display all routes advertised to this peer

received

(Optional) Display all routes received from this peer

dampened

(Optional) Display all dampened routes received from this peer

advertised-routes

(Optional) Display all the routes advertised to this peer

received-routes

(Optional) Display all the routes received from this peer

flap-statistics

(Optional) Display flap statistics for routes received from this peer

paths

(Optional) Display AS paths learned from this peer

Command Mode

- /exec

show ip mbgp nexthop-database

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ { ipv4 { unicast | multicast } | all } ] } } nexthop-database [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

nexthop-database

Display nexthop database

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

all

(Optional) Display BGP information for all address families

Command Mode

- /exec

show ip mbgp nexthop

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ ipv4 { unicast | multicast } ] } nexthop <ipnexthop> [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

nexthop

Display routes matching the nexthop

ipnexthop

Nexthop address

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

Command Mode

- /exec

show ip mbgp prefix-list

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ ipv4 { unicast | multicast } ] } } prefix-list { <prfxlist-name> | <test_pol_name> } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

prefix-list

Display routes matching the prefix-list

prfxlist-name

Name of prefix-list

test_pol_name

An existing test-list policy

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

Command Mode

- /exec

show ip mbgp received-paths

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ { ipv4 { unicast | multicast } | all } ] } } received-paths [ private ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

received-paths

Display paths stored for soft-reconfig

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

all

(Optional) Display BGP information for all address families

private

(Optional) private

Command Mode

- /exec

show ip msdp count

show ip msdp count [ <asn> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-vrf> <total-cnt> { TABLE_asn <out-asn> <src-cnt> <grp-cnt> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

count

Display SA cache counters

asn

(Optional) AS number

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-vrf

(Optional)

total-cnt

(Optional)

TABLE_asn

(Optional)

out-asn

(Optional)

src-cnt

(Optional)

grp-cnt

(Optional)

Command Mode

- /exec

show ip msdp event-history

show ip msdp [ <asn> ] [ internal ] event-history { errors | msgs | <msdp-event-hist-buf-name> | statistics }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

asn

(Optional) AS number

internal

(Optional) Commands for internal use

event-history

Show various event logs of MSDP

errors

Error logs of MSDP

msgs

Message logs of MSDP

msdp-event-hist-buf-name

Buffer

statistics

Buffer state

Command Mode

- /exec

show ip msdp internal

show ip msdp internal

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

internal

Commands for internal use

Command Mode

- /exec

show ip msdp internal errors

show ip msdp internal errors

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

internal

Commands for internal use

errors

Show MSDP errors

Command Mode

- /exec

show ip msdp internal library-info

show ip msdp internal library-info

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

internal

Commands for internal use

library-info

Show various event logs of library

Command Mode

- /exec

show ip msdp internal mem-stats

show ip msdp internal mem-stats [ no-libs ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

internal

Commands for internal use

mem-stats

Show memory allocation statistics

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

Command Mode

- /exec

show ip msdp internal mrib

show ip msdp internal { mrib-txlist [ vrf { <vrf-name> | <vrf-known-name> } ] | mrib-buffers }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

internal

Commands for internal use

mrib-txlist

Show MRIB transmission-list information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

mrib-buffers

Show MRIB route buffer information

Command Mode

- /exec

show ip msdp internal pim-cache

show ip msdp internal pim-cache [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

internal

Commands for internal use

pim-cache

Show PIM client cache

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show ip msdp mesh-group

show ip msdp mesh-group [ <mesh-group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-vrf> { TABLE_meshgroup <meshgroup-name> { TABLE_peer <peer-ipaddr> <peer-asn> <peer-description> } } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

mesh-group

Display members of mesh-group

mesh-group

(Optional) Display single mesh-group

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-vrf

(Optional)

TABLE_meshgroup

(Optional)

meshgroup-name

(Optional)

TABLE_peer

(Optional)

peer-ipaddr

(Optional)

peer-asn

(Optional)

peer-description

(Optional)

Command Mode

- /exec

show ip msdp peer

show ip msdp peer [ <peer-address> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_peer <peer-ipaddr> <out-vrf> <peer-asn> <local-ipaddr> <local-iface> <fully-configured> <peer-description> <connection-status> <state-duration> <peer-listening> <peer-uptime> <peer-password> <peer-ki> <peer-kt> <peer-ri> <peer-rr> <sa-in-policy> <sa-out-policy> <sa-limit> <mesh-name> <last-rcvd> <sa-rcvd> <sa-sent> <sa-req-rcvd> <sa-req-sent> <sa-resp-rcvd> <sa-resp-sent> <sa-ka-rcvd> <sa-ka-sent> <sa-notif-rcvd> <sa-notif-sent> <out-ctrl-msgs> <in-ctrl-msgs> <out-data-msgs> <in-data-msgs> <rem-port> <local-port> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

peer

Display MSDP peer information

peer-address

(Optional) IP address of MSDP peer

__readonly__

(Optional)

TABLE_peer

(Optional)

peer-ipaddr

(Optional)

out-vrf

(Optional)

peer-asn

(Optional)

local-ipaddr

(Optional)

local-iface

(Optional)

fully-configured

(Optional)

peer-description

(Optional)

connection-status

(Optional)

state-duration

(Optional)

peer-listening

(Optional)

peer-uptime

(Optional)

peer-password

(Optional)

peer-ki

(Optional)

peer-kt

(Optional)

peer-ri

(Optional)

peer-rr

(Optional)

sa-in-policy

(Optional)

sa-out-policy

(Optional)

sa-limit

(Optional)

mesh-name

(Optional)

last-rcvd

(Optional)

sa-rcvd

(Optional)

sa-sent

(Optional)

sa-req-rcvd

(Optional)

sa-req-sent

(Optional)

sa-resp-rcvd

(Optional)

sa-resp-sent

(Optional)

sa-ka-rcvd

(Optional)

sa-ka-sent

(Optional)

sa-notif-rcvd

(Optional)

sa-notif-sent

(Optional)

out-ctrl-msgs

(Optional)

in-ctrl-msgs

(Optional)

out-data-msgs

(Optional)

in-data-msgs

(Optional)

rem-port

(Optional)

local-port

(Optional)

Command Mode

- /exec

show ip msdp policy statistics sa-policy in

show ip msdp policy statistics sa-policy <peer-address> { in | out } [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ { TABLE_routemap <name> <action> <seq_num> [ { TABLE_cmd <command> <match_count> <compare_count> } ] } <total_accept_count> <total_reject_count> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

msdp

MSDP global configuration commands

policy

Policy information

statistics

Policy statistics

sa-policy

Configureed SA policy for MSDP peer

peer-address

IP address of MSDP peer for SA policy

in

Input policy

out

Output policy

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_routemap

(Optional)

name

(Optional)

action

(Optional)

seq_num

(Optional)

TABLE_cmd

(Optional)

command

(Optional)

compare_count

(Optional)

match_count

(Optional)

total_accept_count

(Optional)

total_reject_count

(Optional)

Command Mode

- /exec

show ip msdp rpf

show ip msdp rpf <rp-address> [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-vrf> <out-rp-address> { TABLE_mesh <peer-addr> <mesh-name> } <is-peer-cnt-one> <is-rp-peer> <is-bgp-alive> <is-mbgp> <bgp-peer-addr> <peer-asn> <origin-asn> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

rpf

Display RPF-peer for RP address

rp-address

IP address of RP

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-vrf

(Optional)

out-rp-address

(Optional)

TABLE_mesh

(Optional)

peer-addr

(Optional)

mesh-name

(Optional)

is-peer-cnt-one

(Optional)

is-rp-peer

(Optional)

is-bgp-alive

(Optional)

is-mbgp

(Optional)

bgp-peer-addr

(Optional)

peer-asn

(Optional)

origin-asn

(Optional)

Command Mode

- /exec

show ip msdp sa

show ip msdp { sa-cache | route } [ { <source> [ <group> ] } | { <group> [ <source> ] } ] [ <asn> ] [ peer <peer> ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-vrf> <total-sa-count> { TABLE_sa <src-addr> <grp-addr> <rp-addr> <out-asn> <peer-addr> <uptime> <expire> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

route

Display MSDP SA route cache

sa-cache

Display MSDP SA route cache

source

(Optional) Display group/source address for SA

group

(Optional) Display group/source address for SA

asn

(Optional) AS number

detail

(Optional) Display detailed information

peer

(Optional) Display MSDP SA received from single peer

peer

(Optional) IP address of peer for SA

__readonly__

(Optional)

out-vrf

(Optional)

total-sa-count

(Optional)

TABLE_sa

(Optional)

src-addr

(Optional)

grp-addr

(Optional)

rp-addr

(Optional)

peer-addr

(Optional)

out-asn

(Optional)

uptime

(Optional)

expire

(Optional)

Command Mode

- /exec

show ip msdp sources

show ip msdp sources [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-vrf> { TABLE_source <source-addr> <is-count-ge-limit> <count> <is-limit-valid> <limit> <source-prefix> <violates> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

sources

Display learned sources with their group counts and limits

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-vrf

(Optional)

TABLE_source

(Optional)

source-addr

(Optional)

is-count-ge-limit

(Optional)

count

(Optional)

is-limit-valid

(Optional)

limit

(Optional)

source-prefix

(Optional)

violates

(Optional)

Command Mode

- /exec

show ip msdp statistics

show ip msdp statistics [ <peer-address> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-vrf> <select-err> <recv-sel-err> { TABLE_peer <peer-address> <buffer-full> <recv-buf-full> <fatal-err> <recv-fat-err> <would-block> <recv-would-block> <sock-exp> <invalid-type> <invalid-len> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

statistics

Display internal statistics

peer-address

(Optional) IP address of MSDP peer

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-vrf

(Optional)

select-err

(Optional)

recv-sel-err

(Optional)

TABLE_peer

(Optional)

peer-address

(Optional)

buffer-full

(Optional)

recv-buf-full

(Optional)

fatal-err

(Optional)

recv-fat-err

(Optional)

would-block

(Optional)

recv-would-block

(Optional)

sock-exp

(Optional)

invalid-type

(Optional)

invalid-len

(Optional)

Command Mode

- /exec

show ip msdp summary

show ip msdp summary [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-vrf> <local-asn> <originator-id> <config-peer-count> <estb-peer-count> <shut-peer-count> { TABLE_peer <peer-address> <peer-asn> <peer-state> <peer-uptime> <peer-last-msg> <peer-sa-rcvd> <peer-sa-limit> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

msdp

Display MSDP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

summary

Display MSDP peer summary

__readonly__

(Optional)

out-vrf

(Optional)

local-asn

(Optional)

originator-id

(Optional)

config-peer-count

(Optional)

estb-peer-count

(Optional)

shut-peer-count

(Optional)

TABLE_peer

(Optional)

peer-address

(Optional)

peer-asn

(Optional)

peer-state

(Optional)

peer-uptime

(Optional)

peer-last-msg

(Optional)

peer-sa-rcvd

(Optional)

peer-sa-limit

(Optional)

Command Mode

- /exec

show ip nat max

show ip nat max [ __readonly__ <max_translations> <max_dyn_translations> <max_all_host> <static_translations> <dynamic_translations> <icmp_translations> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Show the IP features of the system

nat

IP NAT information

max

IP NAT max values

__readonly__

(Optional)

max_translations

(Optional) Max Translations

max_dyn_translations

(Optional) Max Dynamic Translations

max_all_host

(Optional) Max All Hosts

static_translations

(Optional) No. Static Translations

dynamic_translations

(Optional) No. Dynamic Translations

icmp_translations

(Optional) No. ICMP Translations

Command Mode

- /exec

show ip nat statistics

show ip nat statistics

Syntax Description

Syntax Description

show

Show running system information

ip

Show the IP features of the system

nat

IP NAT information

statistics

Translation statistics

Command Mode

- /exec

show ip nat timeout

show ip nat timeout [ __readonly__ <tcp_timeout> <udp_timeout> <dynamic_timeout> <sampling_timeout> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Show the IP features of the system

nat

IP NAT information

timeout

IP NAT timeout values

__readonly__

(Optional)

tcp_timeout

(Optional) TCP Timeout

udp_timeout

(Optional) UDP Timeout

dynamic_timeout

(Optional) Dynamic Timeout

sampling_timeout

(Optional) Sampling Timeout

Command Mode

- /exec

show ip nat translations

show ip nat translations [ vrf { <vrf-name> | <vrf-known-name> } ] [ verbose ] [ __readonly__ { TABLE_nat_translation [ <Protocol> ] [ <Inside_global_IP_V4_Address> ] [ <Inside_global_port> ] [ <Inside_local_IP_V4_Address> ] [ <Inside_local_port> ] [ <Outside_local_IP_V4_Address> ] [ <Outside_local_port> ] [ <Outside_global_IP_V4_Address> ] [ <Outside_global_port> ] } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Show the IP features of the system

nat

IP NAT information

translations

Translation entries

verbose

(Optional) Show extra information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional) Readonly

TABLE_nat_translation

(Optional) NAT Translation Table

Protocol

(Optional) Protocol

Inside_global_IP_V4_Address

(Optional) Inside global address

Inside_global_port

(Optional) Inside global port

Inside_local_IP_V4_Address

(Optional) Inside local address

Inside_local_port

(Optional) Inside local port

Outside_local_IP_V4_Address

(Optional) Outside local address

Outside_local_port

(Optional) Outside local port

Outside_global_IP_V4_Address

(Optional) Outside global address

Outside_global_port

(Optional) Outside global port

Command Mode

- /exec

show ip ospf

show ip ospf [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <instance_number> <cname> <rid> [ <domain_tag> ] [ <dn_bit_ignore> ] <stateful_ha> <gr_ha> [ <gr_planned_only> ] [ <gr_notify_period> ] [ <gr_grace_period> ] [ <gr_state> ] [ <gr_last_status> ] [ <gr_helper_mode> ] <support_tos0_only> <support_opaque_lsa> [ <low_mem_cond> ] <is_abr> <is_asbr> [ <max_lsa_non_self_number> ] [ <max_lsa_state> ] [ <max_lsa_warning_only> ] [ <max_lsa_current_non_self_lsa_number> ] [ <max_lsa_threshold_pct> ] [ <max_lsa_ignore_time> ] [ <max_lsa_reset_time> ] [ <max_lsa_ignore_count> ] [ <max_lsa_current_ignore_count> ] [ <max_lsa_ignore_time_left> ] [ <max_lsa_reset_time_left> ] [ <max_lsa_permanent_ignore> ] [ { TABLE_redist <proto> [ <max_lsas> ] [ <warning> ] [ <threshold> ] [ <current_count> ] } ] <admin_dist> <ref_bw> <spf_start_time> <spf_hold_time> <spf_max_time> <lsa_start_time> <lsa_hold_time> <lsa_max_time> <min_lsa_arr_time> <lsa_aging_pace> <spf_max_paths> <max_metric_adver> [ [ <max_metric_time_left> ] [ <max_metric_wait_bgp> ] [ <max_metric_timeout> ] [ <max_metric_always> ] [ <max_metric_sum_lsa> ] [ <max_metric_ext_lsa> ] ] <asext_lsa_cnt> <asext_lsa_crc> <asopaque_lsa_cnt> <asopaque_lsa_crc> <area_total> <area_normal> <area_stub> <area_nssa> <act_area_total> <act_area_normal> <act_area_stub> <act_area_nssa> <no_discard_rt_ext> <no_discard_rt_int> [ <bfd_enabled> ] [ <passive_dflt> ] [ <name_lookup> ] [ { TABLE_area <aname> [ <backbone_active> ] [ <active> ] <age> <total_intf> <act_intf> <passive_intf> <loopback_intf> [ <gr_nbr_cnt> ] <stub> [ <stub_def_cost> ] <nssa> [ <no_redist> ] [ <nssa_trans> ] <no_summary> <auth_type> <spf_runs> <last_spf_run_time> [ <rtr_lsa_throt> ] [ TABLE_range <addr> <masklen> <state> <nets> <advertise> [ <cost> ] ] [ <filter_in> ] [ <filter_out> ] <lsa_cnt> <lsa_crc> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

instance_number

(Optional)

cname

(Optional)

rid

(Optional)

domain_tag

(Optional)

dn_bit_ignore

(Optional)

stateful_ha

(Optional)

gr_ha

(Optional)

gr_planned_only

(Optional)

gr_notify_period

(Optional)

gr_grace_period

(Optional)

gr_state

(Optional)

gr_last_status

(Optional)

gr_helper_mode

(Optional)

support_tos0_only

(Optional)

support_opaque_lsa

(Optional)

low_mem_cond

(Optional)

is_abr

(Optional)

is_asbr

(Optional)

max_lsa_non_self_number

(Optional)

max_lsa_state

(Optional)

max_lsa_warning_only

(Optional)

max_lsa_current_non_self_lsa_number

(Optional)

max_lsa_threshold_pct

(Optional)

max_lsa_ignore_time

(Optional)

max_lsa_reset_time

(Optional)

max_lsa_ignore_count

(Optional)

max_lsa_current_ignore_count

(Optional)

max_lsa_ignore_time_left

(Optional)

max_lsa_reset_time_left

(Optional)

max_lsa_permanent_ignore

(Optional)

TABLE_redist

(Optional)

proto

(Optional)

max_lsas

(Optional)

warning

(Optional)

threshold

(Optional)

current_count

(Optional)

admin_dist

(Optional)

ref_bw

(Optional)

spf_start_time

(Optional)

spf_hold_time

(Optional)

spf_max_time

(Optional)

lsa_start_time

(Optional)

lsa_hold_time

(Optional)

lsa_max_time

(Optional)

min_lsa_arr_time

(Optional)

lsa_aging_pace

(Optional)

spf_max_paths

(Optional)

max_metric_adver

(Optional)

max_metric_time_left

(Optional)

max_metric_wait_bgp

(Optional)

max_metric_timeout

(Optional)

max_metric_always

(Optional)

max_metric_sum_lsa

(Optional)

max_metric_ext_lsa

(Optional)

asext_lsa_cnt

(Optional)

asext_lsa_crc

(Optional)

asopaque_lsa_cnt

(Optional)

asopaque_lsa_crc

(Optional)

area_total

(Optional)

area_normal

(Optional)

area_stub

(Optional)

area_nssa

(Optional)

act_area_total

(Optional)

act_area_normal

(Optional)

act_area_stub

(Optional)

act_area_nssa

(Optional)

bfd_enabled

(Optional)

name_lookup

(Optional)

passive_dflt

(Optional)

no_discard_rt_ext

(Optional)

no_discard_rt_int

(Optional)

TABLE_area

(Optional)

aname

(Optional)

backbone_active

(Optional)

active

(Optional)

age

(Optional)

total_intf

(Optional)

act_intf

(Optional)

passive_intf

(Optional)

loopback_intf

(Optional)

gr_nbr_cnt

(Optional)

stub

(Optional)

stub_def_cost

(Optional)

nssa

(Optional)

no_redist

(Optional)

nssa_trans

(Optional)

no_summary

(Optional)

auth_type

(Optional)

spf_runs

(Optional)

last_spf_run_time

(Optional)

rtr_lsa_throt

(Optional)

TABLE_range

(Optional)

addr

(Optional)

masklen

(Optional)

state

(Optional)

nets

(Optional)

advertise

(Optional)

cost

(Optional)

filter_in

(Optional)

filter_out

(Optional)

lsa_cnt

(Optional)

lsa_crc

(Optional)

Command Mode

- /exec

show ip ospf border-routers

show ip ospf [ <tag> ] border-routers [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_br <type> <addr> <cost> <asbr> <abr> <area> <spf_inst> [ <vlink_unresolved> ] [ TABLE_br_ubest_nh [ <ubest_nh_addr> ] [ <ubest_nh_intf> ] ] [ TABLE_br_mbest_nh [ <mbest_nh_addr> ] [ <mbest_nh_intf> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

border-routers

Border routers

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_br

(Optional)

type

(Optional)

addr

(Optional)

cost

(Optional)

asbr

(Optional)

abr

(Optional)

area

(Optional)

spf_inst

(Optional)

vlink_unresolved

(Optional)

TABLE_br_ubest_nh

(Optional)

ubest_nh_addr

(Optional)

ubest_nh_intf

(Optional)

TABLE_br_mbest_nh

(Optional)

mbest_nh_addr

(Optional)

mbest_nh_intf

(Optional)

Command Mode

- /exec

show ip ospf database

show ip ospf [ <tag> ] database [ [ [ [ network | asbr-summary | summary | router | opaque-link | opaque-area | nssa-external ] [ area <area-id-ip> ] ] | external [ ext_tag <tag_val> ] | opaque-as ] [ <lsid> ] [ self-originated | adv-router <advid> | adv-router-name <adv-name> ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <rid> <ptag> <cname> [ TABLE_db2_lsa <name> [ <area> ] <id> <advrtr> <age> <seqno> <cksum> [ <opaque_id> ] [ <corrupt> ] [ <rtr_num_links> ] [ <tag> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

database

Link-state Database Summary

network

(Optional) Display network LSAs

asbr-summary

(Optional) Display type 4 (asbr-summary) LSAs

external

(Optional) Display type 5 (external) LSAs

router

(Optional) Display router LSAs

nssa-external

(Optional) Display type 7 (NSSA external) LSAs

opaque-link

(Optional) Display Opaque Link-Local LSAs

opaque-area

(Optional) Display Opaque Area LSAs

opaque-as

(Optional) Display Opaque AS LSAs

summary

(Optional) Display type 3 (network-summary) LSAs

self-originated

(Optional) Display only self-originated LSAs

lsid

(Optional) Restrict display by link state ID

adv-router

(Optional) Restrict display by Advertising router

advid

(Optional) Advertising router ID

adv-router-name

(Optional) Restrict display by Advertising router name

adv-name

(Optional) DNS Name of the Advertising router

area

(Optional) Display only LSA's in this area

area-id-ip

(Optional) Area Id as an integer or ip address

ext_tag

(Optional) Restrict display by tag

tag_val

(Optional) 32-bit tag value

tag

(Optional)

__readonly__

(Optional)

TABLE_ctx

(Optional)

rid

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_db2_lsa

(Optional)

name

(Optional)

area

(Optional)

id

(Optional)

advrtr

(Optional)

age

(Optional)

seqno

(Optional)

cksum

(Optional)

opaque_id

(Optional)

corrupt

(Optional)

rtr_num_links

(Optional)

Command Mode

- /exec

show ip ospf database database-summary

show ip ospf [ <tag> ] database database-summary [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <rid> <ptag> <cname> [ TABLE_dbsum [ TABLE_dbsum_area <area> [ TABLE_dbsum_area_lsa <area_lsa_name> <area_lsa_count> ] <area_lsa_total> ] [ TABLE_dbsum_all [ TABLE_dbsum_lsa_all <lsa_name> <lsa_count> ] <non_self_lsa_total> <lsa_total> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

database

Link-state Database Summary

database-summary

Summary of database

__readonly__

(Optional)

TABLE_ctx

(Optional)

rid

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_dbsum

(Optional)

TABLE_dbsum_area

(Optional)

area

(Optional)

TABLE_dbsum_area_lsa

(Optional)

area_lsa_name

(Optional)

area_lsa_count

(Optional)

area_lsa_total

(Optional)

TABLE_dbsum_all

(Optional)

TABLE_dbsum_lsa_all

(Optional)

lsa_name

(Optional)

lsa_count

(Optional)

non_self_lsa_total

(Optional)

lsa_total

(Optional)

Command Mode

- /exec

show ip ospf database detail

show ip ospf [ <tag> ] database [ [ [ network | asbr-summary | summary | router | opaque-link | opaque-area | nssa-external ] [ area <area-id-ip> ] ] | external [ ext_tag <tag_val> ] | opaque-as ] [ <lsid> ] [ self-originated | adv-router <advid> | adv-router-name <adv-name> ] detail [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <rid> <ptag> <cname> [ TABLE_db2_lsa <name> [ <area> ] [ <rtr_max_metric> ] [ TABLE_lsdb <age> <maxage> <options> <options_str> <wrapping> <dummy> <flush_pending> <type> <id> <id_str> [ <opaque_type> ] [ <opaque_id> ] <advrtr> <seqno> <cksum> <len> [ <corrupt> ] [ <rtr_abr> ] [ <rtr_asbr> ] [ <rtr_translate> ] [ <rtr_vlink_end> ] [ <rtr_num_links> ] [ <rtr_links_mismatch> ] [ TABLE_rlsa [ <rtr_link_type> ] [ <rtr_link_id_str> ] [ <rtr_link_id> ] [ <rtr_link_data_str> ] [ <rtr_link_data> ] [ <rtr_link_num_tos> ] [ <rtr_link_metric> ] [ TABLE_rlinktos [ <rtr_link_tos_id> ] [ <rtr_link_tos_metric> ] ] ] [ <net_mask> ] [ TABLE_netlsa [ <net_rtr> ] ] [ <sum_mask> ] [ <sum_metric> ] [ TABLE_sumlsa [ <sum_tos_id> ] [ <sum_tos_metric> ] ] [ <nssa_mask> ] [ <nssa_metric_type2> ] [ <nssa_metric> ] [ <nssa_fwd_addr> ] [ <nssa_tag> ] [ TABLE_nssa [ <nssa_tos_metric_type2> ] [ <nssa_tos_id> ] [ <nssa_tos_metric> ] [ <nssa_tos_fwd_addr> ] [ <nssa_tos_tag> ] ] [ <asext_mask> ] [ <asext_metric_type2> ] [ <asext_metric> ] [ <asext_fwd_addr> ] [ <asext_tag> ] [ TABLE_asext [ <asext_tos_metric_type2> ] [ <asext_tos_id> <asext_tos_metric> ] [ <asext_tos_fwd_addr> ] [ <asext_tos_tag> ] ] [ <opaque_link_intf> ] [ <opaque_unknown> ] [ <opaque_data_len> ] [ <opaque_data> ] [ <opaque_corrupt> ] [ <tlv_type> ] [ <tlv_len> ] [ <tlv_data> ] [ <tlv_unknown> ] [ <gr_interval> ] [ <gr_reason> ] [ <gr_addr> ] [ <te_frag_id> ] [ <te_rtr_id> ] [ <te_link_type> ] [ <te_link_id> ] [ <te_link_metric> ] [ <te_link_max_bw> ] [ <te_link_rsv_bw> ] [ <te_link_unrsv_bw> ] [ <te_link_admin> ] [ <te_num_links> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

database

Link-state Database Summary

network

(Optional) Display network LSAs

asbr-summary

(Optional) Display type 4 (asbr-summary) LSAs

external

(Optional) Display type 5 (external) LSAs

router

(Optional) Display router LSAs

nssa-external

(Optional) Display type 7 (NSSA external) LSAs

opaque-link

(Optional) Display Opaque Link-Local LSAs

opaque-area

(Optional) Display Opaque Area LSAs

opaque-as

(Optional) Display Opaque AS LSAs

summary

(Optional) Display type 3 (network-summary) LSAs

self-originated

(Optional) Display only self-originated LSAs

lsid

(Optional) Restrict display by link state ID

adv-router

(Optional) Restrict display by Advertising router

advid

(Optional) Advertising router ID

adv-router-name

(Optional) Restrict display by Advertising router name

adv-name

(Optional) DNS Name of the Advertising router

area

(Optional) Display only LSA's in this area

area-id-ip

(Optional) Area Id as an integer or ip address

ext_tag

(Optional) Restrict display by tag

tag_val

(Optional) 32-bit tag value

detail

Display LSA in detail

__readonly__

(Optional)

TABLE_ctx

(Optional)

rid

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_db2_lsa

(Optional)

name

(Optional)

area

(Optional)

rtr_max_metric

(Optional)

TABLE_lsdb

(Optional)

age

(Optional)

maxage

(Optional)

options

(Optional)

options_str

(Optional)

wrapping

(Optional)

dummy

(Optional)

flush_pending

(Optional)

type

(Optional)

id

(Optional)

id_str

(Optional)

opaque_type

(Optional)

opaque_id

(Optional)

advrtr

(Optional)

seqno

(Optional)

cksum

(Optional)

len

(Optional)

corrupt

(Optional)

rtr_abr

(Optional)

rtr_asbr

(Optional)

rtr_translate

(Optional)

rtr_vlink_end

(Optional)

rtr_num_links

(Optional)

rtr_links_mismatch

(Optional)

TABLE_rlsa

(Optional)

rtr_link_type

(Optional)

rtr_link_id_str

(Optional)

rtr_link_id

(Optional)

rtr_link_data_str

(Optional)

rtr_link_data

(Optional)

rtr_link_num_tos

(Optional)

rtr_link_metric

(Optional)

TABLE_rlinktos

(Optional)

rtr_link_tos_id

(Optional)

rtr_link_tos_metric

(Optional)

net_mask

(Optional)

TABLE_netlsa

(Optional)

net_rtr

(Optional)

sum_mask

(Optional)

sum_metric

(Optional)

TABLE_sumlsa

(Optional)

sum_tos_id

(Optional)

sum_tos_metric

(Optional)

nssa_mask

(Optional)

nssa_metric_type2

(Optional)

nssa_metric

(Optional)

nssa_fwd_addr

(Optional)

nssa_tag

(Optional)

TABLE_nssa

(Optional)

nssa_tos_metric_type2

(Optional)

nssa_tos_id

(Optional)

nssa_tos_metric

(Optional)

nssa_tos_fwd_addr

(Optional)

nssa_tos_tag

(Optional)

asext_mask

(Optional)

asext_metric_type2

(Optional)

asext_metric

(Optional)

asext_fwd_addr

(Optional)

asext_tag

(Optional)

TABLE_asext

(Optional)

asext_tos_metric_type2

(Optional)

asext_tos_id

(Optional)

asext_tos_metric

(Optional)

asext_tos_fwd_addr

(Optional)

asext_tos_tag

(Optional)

opaque_link_intf

(Optional)

opaque_unknown

(Optional)

opaque_data_len

(Optional)

opaque_data

(Optional)

opaque_corrupt

(Optional)

tlv_type

(Optional)

tlv_len

(Optional)

tlv_data

(Optional)

tlv_unknown

(Optional)

gr_interval

(Optional)

gr_reason

(Optional)

gr_addr

(Optional)

te_frag_id

(Optional)

te_rtr_id

(Optional)

te_link_type

(Optional)

te_link_id

(Optional)

te_link_metric

(Optional)

te_link_max_bw

(Optional)

te_link_rsv_bw

(Optional)

te_link_unrsv_bw

(Optional)

te_link_admin

(Optional)

te_num_links

(Optional)

Command Mode

- /exec

show ip ospf event-history

show ip ospf [ <tag> ] [ internal ] event-history { errors | msgs | statistics | adjacency | event | ha | flooding | lsa | spf | redistribution | ldp | te | rib | hello | spf-trigger | cli | objstore }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

internal

(Optional) Commands for internal use

event-history

Show various event logs of OSPF

errors

Error logs

msgs

IPC logs

statistics

Show the state and size of the buffers

adjacency

Adjacency formation logs

event

Internal event logs

ha

HA and GR logs

flooding

LSA flooding logs

lsa

LSA generation and databse logs

spf

SPF calculation logs

redistribution

Redistribution logs

ldp

LDP related logs

te

MPLS TE related logs

rib

RIB related logs

hello

Hello related logs

cli

Cli logs

spf-trigger

SPF TRIGGER related logs

objstore

DME OBJSTORE related logs

Command Mode

- /exec

show ip ospf event-history detail

show ip ospf [ <tag> ] [ internal ] event-history detail [ statistics ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

internal

(Optional) Commands for internal use

event-history

Show event history of OSPF

detail

Show detailed event history information

statistics

(Optional) Show the state and size of the verbose history buffer

Command Mode

- /exec

show ip ospf ha

show ip ospf [ <tag> ] ha [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> <stateful> <pss_restored> <pss_state> <gr_enabled> <gr_grace_period> <gr_state> <gr_last_status> <gr_helper_mode> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ha

High Availability status

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

stateful

(Optional)

pss_restored

(Optional)

pss_state

(Optional)

gr_enabled

(Optional)

gr_grace_period

(Optional)

gr_state

(Optional)

gr_last_status

(Optional)

gr_helper_mode

(Optional)

Command Mode

- /exec

show ip ospf interface

show ip ospf [ <tag> ] interface [ <interface> | vrf { <vrf-name> | <vrf-known-name> | all } ] [ private ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_intf <ifname> <admin_status> <proto_status> [ <unnumbered> ] <addr> [ <masklen> ] [ <parent_intf> ] <area> [ <if_cfg> ] <state_str> <type_str> <cost> [ <bfd_enabled> ] [ <ldp_sync> ] <index> [ <passive> ] [ <mpls> ] [ <transmit_delay> ] [ <if_priority> ] [ <dr_rid> ] [ <dr_addr> ] [ <bdr_rid> ] [ <bdr_addr> ] [ <nbr_total> ] [ <nbr_flood> ] [ <nbr_adjs> ] [ <gr_nbr> ] [ <hello_interval> ] [ <dead_interval> ] [ <wait_interval> ] [ <rxmt_interval> ] [ <hello_timer> ] [ <wait_timer> ] [ <pacing_timer> ] [ <lsu_timer> ] [ <lsack_timer> ] [ <netlsa_throt_timer> ] [ <auth_type> ] [ <keychain_name> ] [ <keychain_ready> ] [ <auth_md5_keyid> ] [ <auth_keyid> ] [ <auth_algo> ] [ <link_lsa_cnt> ] [ <link_lsa_crc> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

interface

OSPF enabled interface

interface

(Optional) OSPF enabled interface

private

(Optional) Developer-only statistics

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_intf

(Optional)

ifname

(Optional)

admin_status

(Optional)

proto_status

(Optional)

unnumbered

(Optional)

addr

(Optional)

masklen

(Optional)

parent_intf

(Optional)

area

(Optional)

if_cfg

(Optional)

state_str

(Optional)

type_str

(Optional)

cost

(Optional)

bfd_enabled

(Optional)

ldp_sync

(Optional)

index

(Optional)

passive

(Optional)

mpls

(Optional)

transmit_delay

(Optional)

if_priority

(Optional)

dr_rid

(Optional)

dr_addr

(Optional)

bdr_rid

(Optional)

bdr_addr

(Optional)

nbr_total

(Optional)

nbr_flood

(Optional)

nbr_adjs

(Optional)

gr_nbr

(Optional)

hello_interval

(Optional)

dead_interval

(Optional)

wait_interval

(Optional)

rxmt_interval

(Optional)

hello_timer

(Optional)

wait_timer

(Optional)

pacing_timer

(Optional)

lsu_timer

(Optional)

lsack_timer

(Optional)

netlsa_throt_timer

(Optional)

auth_type

(Optional)

keychain_name

(Optional)

keychain_ready

(Optional)

auth_md5_keyid

(Optional)

auth_keyid

(Optional)

auth_algo

(Optional)

link_lsa_cnt

(Optional)

link_lsa_crc

(Optional)

Command Mode

- /exec

show ip ospf interface brief

show ip ospf [ <tag> ] interface brief [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> <intf_count> TABLE_intf <ifname> <index> <area> <cost> <state_str> <nbr_total> <admin_status> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

interface

OSPF enabled interface

brief

Display summary of OSPF interfaces

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

intf_count

(Optional)

TABLE_intf

(Optional)

ifname

(Optional)

index

(Optional)

area

(Optional)

cost

(Optional)

state_str

(Optional)

nbr_total

(Optional)

admin_status

(Optional)

Command Mode

- /exec

show ip ospf internal

show ip ospf [ <tag> ] internal [ errors ] [ area <area-id-ip> ] [ asbrs ] [ externals ] [ flood-indices ] [ if-number-tree ] [ max-metric ] [ as-external-routes ] [ nssa-routes ] [ lsa <area-id2-ip> <lstype> <lsid> <advrtr> [ <interface> ] ] [ txlist { inter-prefix | inter-router | as-external | urib | u6rib | throttle } ] [ te ] [ table-map ] [ area-list [ <area-list-num> ] ] [ interface-list [ <if-list-num> ] ] [ nbr-list [ <nbr-list-num> ] ] [ max-lsa ] [ as-definfo-originate ] [ clear-ipv4-rt-queue ] [ forwarding-address ] [ area-range ] [ flood-queue-drops ] [ superbackbone ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

internal

Commands for internal use

errors

(Optional) Error counters

area

(Optional) OSPF Area information

area-id-ip

(Optional) Area Id as an integer or ip address

asbrs

(Optional) OSPF ASBR information

externals

(Optional) OSPF External LSAs information

flood-indices

(Optional) OSPF Flood index usage for neighbors and interfaces

if-number-tree

(Optional) Patricia Tree of OSPF interfaces indexed by iod

max-metric

(Optional) max metric related flags and values

as-external-routes

(Optional) Display the external routes in external redist PT

nssa-routes

(Optional) Display the nssa routes in nssa redist PT

lsa

(Optional) OSPF LSA information

max-lsa

(Optional) Show max-lsa feature details and statistics

area-id2-ip

(Optional) Area Id as an integer or ip address

lstype

(Optional) Link state type of LSA

lsid

(Optional) Link state ID of LSA

advrtr

(Optional) Advertising router of LSA

interface

(Optional) OSPF enabled interface

txlist

(Optional) Show SPF transmission list

inter-prefix

(Optional) Show inter-area/type-3 prefix SPF transmission list

inter-router

(Optional) Show inter-area-router SPF transmission list

as-external

(Optional) Show type-5/type-7 SPF transmission list

urib

(Optional) Show URIB transmission list

u6rib

(Optional) Show U6RIB transmission list

throttle

(Optional) Show self originated LSA throttle list

te

(Optional) Show MPLS TE related information

table-map

(Optional) Show table-map policy details and statistics

area-list

(Optional) Show area list

area-list-num

(Optional) Area list number

interface-list

(Optional) Show interface list

if-list-num

(Optional) Interface list number

nbr-list

(Optional) Show neighbor list

nbr-list-num

(Optional) Neighbor list number

as-definfo-originate

(Optional) Show type-5 default-information originate state

clear-ipv4-rt-queue

(Optional) Show the internal clear IPv4 route queue

flood-queue-drops

(Optional) Show statistics related to drops when packets are enqueued on flood queue

superbackbone

(Optional) Show vpn_superbackbone info

forwarding-address

(Optional) Show the forwarding addresses PT in this vrf

area-range

(Optional) Show all area ranges and their component routes in a given area

Command Mode

- /exec

show ip ospf internal ha

show ip ospf [ <tag> ] internal ha [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

internal

Commands for internal use

ha

HA related information

Command Mode

- /exec

show ip ospf internal library-info

show ip ospf [ <tag> ] internal library-info

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

internal

Commands for internal use

library-info

Show various event logs of library

Command Mode

- /exec

show ip ospf internal mem-stats

show ip ospf [ <tag> ] internal mem-stats [ no-libs ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

internal

Commands for internal use

mem-stats

Show memory allocation statistics

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

Command Mode

- /exec

show ip ospf internal missed-traps-statistics

show ip ospf [ <tag> ] internal missed-traps-statistics

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

internal

Commands for internal use

missed-traps-statistics

Show the statistics for all the ospf traps not sent due to rate limiting

Command Mode

- /exec

show ip ospf lsa-content-changed-list

show ip ospf [ <tag> ] lsa-content-changed-list { <ip-addr> | <neighbor-name> } <interface> [ __readonly__ [ TABLE_ctx <ptag> <cname> [ TABLE_lschg <nbr_rid> <intf> <nbr_addr> [ TABLE_lsa [ <type> ] [ <lsid> ] [ <advrtr> ] [ <seqno> ] [ <cksum> ] [ <age> ] ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

lsa-content-changed-list

LSAs that changed contents

interface

OSPF enabled interface

ip-addr

Neighbor router ID

neighbor-name

DNS Name of the neighbor

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_lschg

(Optional)

nbr_rid

(Optional)

intf

(Optional)

nbr_addr

(Optional)

TABLE_lsa

(Optional)

type

(Optional)

lsid

(Optional)

advrtr

(Optional)

seqno

(Optional)

cksum

(Optional)

age

(Optional)

Command Mode

- /exec

show ip ospf memory

show ip ospf [ <tag> ] memory [ __readonly__ TABLE_mem <ptag> <byte_total> <byte_consumed> <byte_overhead> <byte_allocated> <alloc_current> <alloc_created> <alloc_failed> <alloc_free> <bf_current> <bf_created> <bf_failed> <bf_free> <bf_byte_consumed> <bf_32_current> <bf_32_created> <bf_32_failed> <bf_32_free> <bf_32_byte_consumed> <slab_current> <slab_created> <slab_failed> <slab_free> <slab_byte_consumed> <if_index_alloc_failed> <nbr_index_alloc_failed> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

memory

Memory usage statistics

__readonly__

(Optional)

TABLE_mem

(Optional)

ptag

(Optional)

byte_total

(Optional)

byte_consumed

(Optional)

byte_overhead

(Optional)

byte_allocated

(Optional)

alloc_current

(Optional)

alloc_created

(Optional)

alloc_failed

(Optional)

alloc_free

(Optional)

bf_current

(Optional)

bf_created

(Optional)

bf_failed

(Optional)

bf_free

(Optional)

bf_byte_consumed

(Optional)

bf_32_current

(Optional)

bf_32_created

(Optional)

bf_32_failed

(Optional)

bf_32_free

(Optional)

bf_32_byte_consumed

(Optional)

slab_current

(Optional)

slab_created

(Optional)

slab_failed

(Optional)

slab_free

(Optional)

slab_byte_consumed

(Optional)

if_index_alloc_failed

(Optional)

nbr_index_alloc_failed

(Optional)

Command Mode

- /exec

show ip ospf mpls ldp interface

show ip ospf [ <tag> ] mpls ldp interface [ <interface> | vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_ldpintf <ifname> <area> <ldp_ac> <ldp_sync><state_str><type_str> ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

mpls

MPLS related information

ldp

LDP related information

interface

OSPF enabled interface

interface

(Optional) OSPF enabled interface

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_ldpintf

(Optional)

ifname

(Optional)

area

(Optional)

ldp_ac

(Optional)

Command Mode

- /exec

show ip ospf neighbors

show ip ospf [ <tag> ] neighbors [ { { <interface> [ <neighbor> | <neighbor-name> ] } | { [ <neighbor> | <neighbor-name> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } } ] [ __readonly__ TABLE_ctx <ptag> <cname> <nbrcount> [ TABLE_nbr <rid> <priority> <state> <drstate> <uptime> <addr> <intf> [ <multiarea> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

neighbors

Neighbor list

interface

(Optional) OSPF enabled interface

neighbor

(Optional) Router ID of neighbor

neighbor-name

(Optional) DNS Name of the neighbor

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

nbrcount

(Optional)

TABLE_nbr

(Optional)

rid

(Optional)

priority

(Optional)

state

(Optional)

drstate

(Optional)

uptime

(Optional)

addr

(Optional)

intf

(Optional)

multiarea

(Optional)

Command Mode

- /exec

show ip ospf neighbors detail

show ip ospf [ <tag> ] neighbors [ <interface> ] [ <neighbor> | <neighbor-name> ] detail [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ private ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_nbr <rid> <addr> <area> <intf> <state> <transition> <lastchange> [ <bfd_state> ] [ <priority> ] [ <ifid> ] [ <dr> ] [ <dc> ] [ <bdr> ] [ <master> ] [ <seqno> ] [ <dbdallsentacked> ] [ <dbdallsent> ] [ <dbdallacked> ] [ <lsaonreqlist> ] [ <lsafromlastreq> ] [ <lsreqrxmts> ] <helloptions> <dbdoptions> <lastnonhello> [ <deadtimer> ] [ <pacingtimer> ] [ <dbdrxmtimer> ] [ <reqrxmtimer> ] [ <lsutimer> ] [ <rerxmtimer> ] [ <fastrerxmtimer> ] [ <lsacktimer> ] [ <grtimer> ] [ <helpermode> ] [ <helpercand> ] [ <helperterm> ] [ <senddbd> ] [ <sendlsreq> ] [ <sendlsu> ] [ <sendlsurxmt> ] [ <sendlsack> ] [ <sendlsreqreply> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

neighbors

Neighbor list

interface

(Optional) OSPF enabled interface

neighbor

(Optional) Router ID of neighbor

neighbor-name

(Optional) DNS Name of the neighbor

detail

Show detailed neighbor display

private

(Optional) Developer-only statistics

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_nbr

(Optional)

rid

(Optional)

addr

(Optional)

area

(Optional)

intf

(Optional)

state

(Optional)

transition

(Optional)

lastchange

(Optional)

bfd_state

(Optional)

priority

(Optional)

ifid

(Optional)

dr

(Optional)

bdr

(Optional)

master

(Optional)

seqno

(Optional)

dbdallsentacked

(Optional)

dbdallsent

(Optional)

dbdallacked

(Optional)

lsaonreqlist

(Optional)

lsafromlastreq

(Optional)

lsreqrxmts

(Optional)

helloptions

(Optional)

dbdoptions

(Optional)

lastnonhello

(Optional)

deadtimer

(Optional)

pacingtimer

(Optional)

dbdrxmtimer

(Optional)

reqrxmtimer

(Optional)

lsutimer

(Optional)

rerxmtimer

(Optional)

fastrerxmtimer

(Optional)

lsacktimer

(Optional)

grtimer

(Optional)

helpermode

(Optional)

helpercand

(Optional)

helperterm

(Optional)

senddbd

(Optional)

sendlsreq

(Optional)

sendlsu

(Optional)

sendlsurxmt

(Optional)

sendlsack

(Optional)

sendlsreqreply

(Optional)

dc

(Optional)

Command Mode

- /exec

show ip ospf neighbors summary

show ip ospf [ <tag> ] neighbors [ <interface> ] summary [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> TABLE_intf { <ifname> | <total> } <down> <attempt> <init> <twoway> <exstart> <exchange> <loading> <full> <if_total> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

neighbors

Neighbor list

interface

(Optional) OSPF enabled interface

summary

Summary of neighbors

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_intf

(Optional)

ifname

(Optional)

total

(Optional)

down

(Optional)

attempt

(Optional)

init

(Optional)

twoway

(Optional)

exstart

(Optional)

exchange

(Optional)

loading

(Optional)

full

(Optional)

if_total

(Optional)

Command Mode

- /exec

show ip ospf policy statistics

show ip ospf [ <inst> ] policy statistics { { redistribute { { bgp | eigrp } <as> | { isis | ospf | rip } <tag> | static | direct | amt } } | { area <area-id-ip> filter-list { in | out } } } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <ptag> TABLE_ctx <cname> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

inst

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

policy

Display Policy related information

statistics

Display Route Filter statistics

redistribute

Statistics for redistribution

isis

ISO Intermediate-to-Intermediate (IS-IS)

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

ospf

Open Shortest Path First (OSPFv2)

eigrp

Enhanced Interior Gateway Protocol (EIGRP)

rip

Routing Information Protocol (RIP)

static

Static

direct

Directly connected

amt

AMT anycast prefix

tag

Source protocol tag

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

filter-list

Filter prefixes between OSPF areas

in

Filter networks sent to this area

out

Filter networks sent from this area

__readonly__

(Optional)

ptag

(Optional)

TABLE_ctx

(Optional)

cname

(Optional)

Command Mode

- /exec

show ip ospf request-list

show ip ospf [ <tag> ] request-list { <ip-addr> | <neighbor-name> } <interface> [ __readonly__ [ TABLE_ctx <ptag> <cname> [ TABLE_lsreq <nbr_rid> <intf> <nbr_addr> <total> [ TABLE_lsa [ <type> ] [ <lsid> ] [ <advrtr> ] [ <seqno> ] [ <cksum> ] [ <age> ] ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

request-list

Link state request list

interface

OSPF enabled interface

ip-addr

Neighbor router ID

neighbor-name

DNS Name of the neighbor

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_lsreq

(Optional)

nbr_rid

(Optional)

intf

(Optional)

nbr_addr

(Optional)

total

(Optional)

TABLE_lsa

(Optional)

type

(Optional)

lsid

(Optional)

advrtr

(Optional)

seqno

(Optional)

cksum

(Optional)

age

(Optional)

Command Mode

- /exec

show ip ospf retransmission-list

show ip ospf [ <tag> ] retransmission-list { <routerid> | <router-name> } <interface> [ __readonly__ [ TABLE_ctx <ptag> <cname> [ TABLE_rxmit <nbr_rid> <intf> <nbr_addr> [ <timer_running> ] [ <timer_due> ] [ TABLE_lsa [ <type> ] [ <lsid> ] [ <advrtr> ] [ <seqno> ] [ <cksum> ] [ <age> ] ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

retransmission-list

Link state retransmission list

routerid

Neighbor router ID

router-name

DNS Name of the router

interface

OSPF enabled interface

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_rxmit

(Optional)

nbr_rid

(Optional)

intf

(Optional)

nbr_addr

(Optional)

timer_running

(Optional)

timer_due

(Optional)

TABLE_lsa

(Optional)

type

(Optional)

lsid

(Optional)

advrtr

(Optional)

seqno

(Optional)

cksum

(Optional)

age

(Optional)

Command Mode

- /exec

show ip ospf route

show ip ospf [ <tag> ] route [ <ip-addr> | <ip-prefix> [ longer-prefixes ] ] [ all_routes ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ <hdr_addr> ] [ <hdr_masklen> ] [ TABLE_route <addr> <masklen> <type> <in_rib> <direct> [ <area> ] [ <tag> ] [ <vlink_unresolved> ] [ TABLE_route_ubest_nh [ <ubest_nh_addr> ] [ <ubest_nh_intf> ] [ <ubest_cost> ] [ <distance> ] [ <ubest_nh_direct> ] [ <ubest_nh_in_rib> ] ] [ TABLE_route_mbest_nh [ <mbest_nh_addr> ] [ <mbest_nh_intf> ] [ <mbest_cost> ] [ <mbest_nh_direct> ] [ <mbest_nh_in_rib> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

route

Internal OSPF routes

ip-addr

(Optional) Show single OSPF route

ip-prefix

(Optional) Show single exact match OSPF route

longer-prefixes

(Optional) Show exact match and more specific routes

all_routes

(Optional) Display all OSPF routes

tag

(Optional)

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

hdr_addr

(Optional)

hdr_masklen

(Optional)

TABLE_route

(Optional)

addr

(Optional)

masklen

(Optional)

type

(Optional)

in_rib

(Optional)

direct

(Optional)

area

(Optional)

vlink_unresolved

(Optional)

TABLE_route_ubest_nh

(Optional)

ubest_nh_addr

(Optional)

ubest_nh_intf

(Optional)

ubest_cost

(Optional)

distance

(Optional)

ubest_nh_direct

(Optional)

ubest_nh_in_rib

(Optional)

TABLE_route_mbest_nh

(Optional)

mbest_nh_addr

(Optional)

mbest_nh_intf

(Optional)

mbest_cost

(Optional)

mbest_nh_direct

(Optional)

mbest_nh_in_rib

(Optional)

Command Mode

- /exec

show ip ospf route summary

show ip ospf [ <tag> ] route [ <ip-prefix> [ longer-prefixes ] ] summary [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_route <total_routes> <total_paths> [ TABLE_route_type <path_type> <path_routes> <path_paths> ] [ TABLE_route_masklen <masklen> <masklen_routes> <masklen_paths> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

route

Internal OSPF routes

ip-prefix

(Optional) Show single exact match OSPF route

longer-prefixes

(Optional) Show exact match and more specific routes

summary

Show route counts

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_route

(Optional)

total_routes

(Optional)

total_paths

(Optional)

TABLE_route_type

(Optional)

path_type

(Optional)

path_routes

(Optional)

path_paths

(Optional)

TABLE_route_masklen

(Optional)

masklen

(Optional)

masklen_routes

(Optional)

masklen_paths

(Optional)

Command Mode

- /exec

show ip ospf sham-links

show ip ospf [ <tag> ] sham-links [ brief ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_slink <name> [ <nbr_rid> ] <if_state> <transit_area> <nh_intf> <nbr_addr> [ <transit_area_stub> ] [ <transit_area_nssa> ] <addr> [ <masklen> ] <area> [ <if_cfg> ] <state_str> <type_str> <cost> [ <bfd_enabled> ] <index> [ <passive> ] [ <mpls> ] [ <transmit_delay> ] [ <if_priority> ] [ <dr_rid> ] [ <dr_addr> ] [ <bdr_rid> ] [ <bdr_addr> ] [ <nbr_total> ] [ <nbr_flood> ] [ <nbr_adjs> ] [ <gr_nbr> ] [ <hello_interval> ] [ <dead_interval> ] [ <wait_interval> ] [ <rxmt_interval> ] [ <sum_total> ] [ <hello_timer> ] [ <wait_timer> ] [ <pacing_timer> ] [ <lsu_timer> ] [ <lsack_timer> ] [ <netlsa_throt_timer> ] [ <auth_type> ] [ <keychain_name> ] [ <keychain_ready> ] [ <auth_md5_keyid> ] [ <link_lsa_cnt> ] [ <link_lsa_crc> ] [ <dc_enabled> ] [ <dest_ip> ] [ <src_ip> ] [ <ifnum> ] [ <state> ] [ <transition> ] [ <lastchange> ] [ <priority> ] [ <ifid> ] [ <dr> ] [ <bdr> ] [ <master> ] [ <seqno> ] [ <dbdallsentacked> ] [ <dbdallsent> ] [ <dbdallacked> ] [ <lsaonreqlist> ] [ <lsafromlastreq> ] [ <lsreqrxmts> ] [ <helloptions> ] [ <dbdoptions> ] [ <lastnonhello> ] [ <deadtimer> ] [ <pacingtimer> ] [ <dbdrxmtimer> ] [ <reqrxmtimer> ] [ <lsutimer> ] [ <rerxmtimer> ] [ <fastrerxmtimer> ] [ <lsacktimer> ] [ <grtimer> ] [ <helpermode> ] [ <helpercand> ] [ <helperterm> ] [ <senddbd> ] [ <sendlsreq> ] [ <sendlsu> ] [ <sendlsurxmt> ] [ <sendlsack> ] [ <sendlsreqreply> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

sham-links

Sham link information

brief

(Optional) Display summary of OSPF sham links

__readonly__

(Optional)

ptag

(Optional)

TABLE_ctx

(Optional)

cname

(Optional)

TABLE_slink

(Optional)

name

(Optional)

nbr_rid

(Optional)

if_state

(Optional)

transit_area

(Optional)

nh_intf

(Optional)

dc_enabled

(Optional)

nbr_addr

(Optional)

sum_total

(Optional)

transit_area_stub

(Optional)

transit_area_nssa

(Optional)

addr

(Optional)

masklen

(Optional)

area

(Optional)

if_cfg

(Optional)

state_str

(Optional)

type_str

(Optional)

cost

(Optional)

bfd_enabled

(Optional)

index

(Optional)

passive

(Optional)

mpls

(Optional)

transmit_delay

(Optional)

if_priority

(Optional)

dr_rid

(Optional)

dr_addr

(Optional)

bdr_rid

(Optional)

bdr_addr

(Optional)

nbr_total

(Optional)

nbr_flood

(Optional)

nbr_adjs

(Optional)

gr_nbr

(Optional)

hello_interval

(Optional)

dead_interval

(Optional)

wait_interval

(Optional)

rxmt_interval

(Optional)

hello_timer

(Optional)

wait_timer

(Optional)

pacing_timer

(Optional)

lsu_timer

(Optional)

lsack_timer

(Optional)

netlsa_throt_timer

(Optional)

auth_type

(Optional)

keychain_name

(Optional)

keychain_ready

(Optional)

auth_md5_keyid

(Optional)

link_lsa_cnt

(Optional)

link_lsa_crc

(Optional)

state

(Optional)

transition

(Optional)

lastchange

(Optional)

priority

(Optional)

ifid

(Optional)

dr

(Optional)

bdr

(Optional)

master

(Optional)

seqno

(Optional)

dbdallsentacked

(Optional)

dbdallsent

(Optional)

dbdallacked

(Optional)

lsaonreqlist

(Optional)

lsafromlastreq

(Optional)

lsreqrxmts

(Optional)

helloptions

(Optional)

dbdoptions

(Optional)

lastnonhello

(Optional)

deadtimer

(Optional)

pacingtimer

(Optional)

dbdrxmtimer

(Optional)

reqrxmtimer

(Optional)

lsutimer

(Optional)

rerxmtimer

(Optional)

fastrerxmtimer

(Optional)

lsacktimer

(Optional)

grtimer

(Optional)

helpermode

(Optional)

helpercand

(Optional)

helperterm

(Optional)

senddbd

(Optional)

sendlsreq

(Optional)

sendlsu

(Optional)

sendlsurxmt

(Optional)

sendlsack

(Optional)

sendlsreqreply

(Optional)

dest_ip

(Optional)

src_ip

(Optional)

ifnum

(Optional)

Command Mode

- /exec

show ip ospf statistics

show ip ospf [ <tag> ] statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_stats <ptag> <cname> <last_clear> <rid_change> <dr_elections> <older_lsa_recv> <nbr_state_change> <nbr_dead_postpone> <nbr_dead_expire> <nbr_bad_lsreq> <nbr_seqno_mismatch> <spf_full> <spf_summary> <spf_external> <spf_extsummary> <rtr_generate> <rtr_refresh> <rtr_flush> <rtr_other_flush> <net_generate> <net_refresh> <net_flush> <net_other_flush> <sum_generate> <sum_refresh> <sum_flush> <sum_other_flush> <asbr_generate> <asbr_refresh> <asbr_flush> <asbr_other_flush> <asext_generate> <asext_refresh> <asext_flush> <asext_other_flush> <opaque_link_generate> <opaque_link_refresh> <opaque_link_flush> <opaque_link_other_flush> <opaque_area_generate> <opaque_area_refresh> <opaque_area_flush> <opaque_area_other_flush> <opaque_as_generate> <opaque_as_refresh> <opaque_as_flush> <opaque_as_other_flush> <limbo_lsa_count> <limbo_lsa_hwm> <limbo_lsa_deleted> <limbo_lsa_revived> <limbo_runs> <limbo_lsa_last_time_hwm> [ <limbo_timer> ] <helloq_size> <helloq_max_size> <helloq_hwm> <helloq_drops> <helloq_last_hwm_time> <floodq_size> <floodq_max_size> <floodq_hwm> <floodq_drops> <floodq_last_hwm_time> <lsdb_add_fail> [ TABLE_buffer_detail [ <buf_size> ] [ <buf_size_huge> ] <buf_in_use> <buf_hwm> <buf_perm> <buf_alloc> <buf_free> ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

statistics

Event counters

__readonly__

(Optional)

TABLE_stats

(Optional)

ptag

(Optional)

cname

(Optional)

last_clear

(Optional)

rid_change

(Optional)

dr_elections

(Optional)

older_lsa_recv

(Optional)

nbr_state_change

(Optional)

nbr_dead_postpone

(Optional)

nbr_dead_expire

(Optional)

nbr_bad_lsreq

(Optional)

nbr_seqno_mismatch

(Optional)

spf_full

(Optional)

spf_summary

(Optional)

spf_external

(Optional)

spf_extsummary

(Optional)

rtr_generate

(Optional)

rtr_refresh

(Optional)

rtr_flush

(Optional)

rtr_other_flush

(Optional)

net_generate

(Optional)

net_refresh

(Optional)

net_flush

(Optional)

net_other_flush

(Optional)

sum_generate

(Optional)

sum_refresh

(Optional)

sum_flush

(Optional)

sum_other_flush

(Optional)

asbr_generate

(Optional)

asbr_refresh

(Optional)

asbr_flush

(Optional)

asbr_other_flush

(Optional)

asext_generate

(Optional)

asext_refresh

(Optional)

asext_flush

(Optional)

asext_other_flush

(Optional)

opaque_link_generate

(Optional)

opaque_link_refresh

(Optional)

opaque_link_flush

(Optional)

opaque_link_other_flush

(Optional)

opaque_area_generate

(Optional)

opaque_area_refresh

(Optional)

opaque_area_flush

(Optional)

opaque_area_other_flush

(Optional)

opaque_as_generate

(Optional)

opaque_as_refresh

(Optional)

opaque_as_flush

(Optional)

opaque_as_other_flush

(Optional)

limbo_lsa_count

(Optional)

limbo_lsa_hwm

(Optional)

limbo_lsa_deleted

(Optional)

limbo_lsa_revived

(Optional)

limbo_runs

(Optional)

limbo_lsa_last_time_hwm

(Optional)

limbo_timer

(Optional)

helloq_size

(Optional)

helloq_max_size

(Optional)

helloq_hwm

(Optional)

helloq_drops

(Optional)

helloq_last_hwm_time

(Optional)

floodq_size

(Optional)

floodq_max_size

(Optional)

floodq_hwm

(Optional)

floodq_drops

(Optional)

floodq_last_hwm_time

(Optional)

lsdb_add_fail

(Optional)

TABLE_buffer_detail

(Optional)

buf_size

(Optional)

buf_size_huge

(Optional)

buf_in_use

(Optional)

buf_hwm

(Optional)

buf_perm

(Optional)

buf_alloc

(Optional)

buf_free

(Optional)

Command Mode

- /exec

show ip ospf summary-address

show ip ospf [ <tag> ] summary-address [ private ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_ctx <ptag> <cname> <rid> [ TABLE_sum <addr> <masklen> [ <metric> ] [ <tag> ] [ <pending> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

summary-address

Summary-address redistribution information

private

(Optional) Developer-only statistics

tag

(Optional)

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

rid

(Optional)

TABLE_sum

(Optional)

addr

(Optional)

masklen

(Optional)

metric

(Optional)

pending

(Optional)

Command Mode

- /exec

show ip ospf traffic

show ip ospf [ <tag> ] traffic [ <interface> [ detail ] | [ detail ] | [ detail ] vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_traf <ptag> <cname> <last_clear> [ <ifname> ] <pkt_in> <pkt_out> <lsu_first_trans> <lsu_retrans> <lsu_for_lsreq> <lsu_nbr_trans> <throttle_out> <throttle_out_token> <throttle_out_ip> <lsa_ignored> <lsa_dropped_spf> <lsa_dropped_gr> <pkt_drops_in> <pkt_drops_out> <pkt_errors_in> <pkt_errors_out> <hello_errors_in> <dbds_errors_in> <lsreqs_errors_in> <lsus_errors_in> <lsacks_errors_in> <pkt_unknown_in> <pkt_unknown_out> <pkt_no_ospf_intf> <bad_version> <bad_crc> <dup_rtr_id> <dup_src_addr> <invalid_src_addr> <invalid_dst_addr> <non_existing_nbr> <pkt_passive_intf> <wrong_area> <invalid_pkt_len> <nbr_changed_routerid_ipaddr> <nbr_changed_interfaceid> [ <bad_auth> ] [ <bad_reserved> ] [ <pkt_no_vrf> ] <hellos_in> <dbds_in> <lsreqs_in> <lsus_in> <lsacks_in> <hellos_out> <dbds_out> <lsreqs_out> <lsus_out> <lsacks_out> [ <hellos_in_hq> <dbds_in_hq> <lsreqs_in_flq> <lsus_in_flq> <lsacks_in_flq> <lsas_in_dbds_in> <lsas_in_lsreqs_in> <lsas_in_lsus_in> <lsas_in_lsacks_in> <lsas_in_dbds_out> <lsas_in_lsreqs_out> <lsas_in_lsus_out> <lsas_in_lsacks_out> <lsas_in_rxmt_lsus_out> ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

interface

(Optional) OSPF enabled interface

detail

(Optional) Display detailed information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

traffic

Packet counters

__readonly__

(Optional)

TABLE_traf

(Optional)

ptag

(Optional)

cname

(Optional)

last_clear

(Optional)

ifname

(Optional)

pkt_in

(Optional)

pkt_out

(Optional)

lsu_first_trans

(Optional)

lsu_retrans

(Optional)

lsu_for_lsreq

(Optional)

lsu_nbr_trans

(Optional)

throttle_out

(Optional)

throttle_out_token

(Optional)

throttle_out_ip

(Optional)

lsa_ignored

(Optional)

lsa_dropped_spf

(Optional)

lsa_dropped_gr

(Optional)

pkt_drops_in

(Optional)

pkt_drops_out

(Optional)

pkt_errors_in

(Optional)

pkt_errors_out

(Optional)

hello_errors_in

(Optional)

dbds_errors_in

(Optional)

lsreqs_errors_in

(Optional)

lsus_errors_in

(Optional)

lsacks_errors_in

(Optional)

pkt_unknown_in

(Optional)

pkt_unknown_out

(Optional)

pkt_no_ospf_intf

(Optional)

bad_version

(Optional)

bad_crc

(Optional)

dup_rtr_id

(Optional)

dup_src_addr

(Optional)

invalid_src_addr

(Optional)

invalid_dst_addr

(Optional)

non_existing_nbr

(Optional)

pkt_passive_intf

(Optional)

wrong_area

(Optional)

invalid_pkt_len

(Optional)

nbr_changed_routerid_ipaddr

(Optional)

nbr_changed_interfaceid

(Optional)

bad_auth

(Optional)

bad_reserved

(Optional)

pkt_no_vrf

(Optional)

hellos_in

(Optional)

dbds_in

(Optional)

lsreqs_in

(Optional)

lsus_in

(Optional)

lsacks_in

(Optional)

hellos_out

(Optional)

dbds_out

(Optional)

lsreqs_out

(Optional)

lsus_out

(Optional)

lsacks_out

(Optional)

hellos_in_hq

(Optional)

dbds_in_hq

(Optional)

lsreqs_in_flq

(Optional)

lsus_in_flq

(Optional)

lsacks_in_flq

(Optional)

lsas_in_dbds_in

(Optional)

lsas_in_lsreqs_in

(Optional)

lsas_in_lsus_in

(Optional)

lsas_in_lsacks_in

(Optional)

lsas_in_dbds_out

(Optional)

lsas_in_lsreqs_out

(Optional)

lsas_in_lsus_out

(Optional)

lsas_in_lsacks_out

(Optional)

lsas_in_rxmt_lsus_out

(Optional)

Command Mode

- /exec

show ip ospf traps-queue

show ip ospf [ <tag> ] traps-queue

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

traps-queue

Show all the priority traps queue parameters

Command Mode

- /exec

show ip ospf virtual-links

show ip ospf [ <tag> ] virtual-links [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_vlink <name> <nbr_rid> <if_state> <transit_area> <nh_intf> <nbr_addr> [ <transit_area_stub> ] [ <transit_area_nssa> ] <addr> [ <masklen> ] <area> [ <if_cfg> ] <state_str> <type_str> <cost> <index> [ <passive> ] [ <mpls> ] [ <transmit_delay> ] [ <if_priority> ] [ <dr_rid> ] [ <dr_addr> ] [ <bdr_rid> ] [ <bdr_addr> ] [ <nbr_total> ] [ <nbr_flood> ] [ <nbr_adjs> ] [ <gr_nbr> ] [ <hello_interval> ] [ <dead_interval> ] [ <wait_interval> ] [ <rxmt_interval> ] [ <hello_timer> ] [ <wait_timer> ] [ <pacing_timer> ] [ <lsu_timer> ] [ <lsack_timer> ] [ <netlsa_throt_timer> ] [ <auth_type> ] [ <keychain_name> ] [ <keychain_ready> ] [ <auth_md5_keyid> ] [ <link_lsa_cnt> ] [ <link_lsa_crc> ] [ <dc_enabled> ] [ <state> ] [ <transition> ] [ <lastchange> ] [ <priority> ] [ <ifid> ] [ <dr> ] [ <bdr> ] [ <master> ] [ <seqno> ] [ <dbdallsentacked> ] [ <dbdallsent> ] [ <dbdallacked> ] [ <lsaonreqlist> ] [ <lsafromlastreq> ] [ <lsreqrxmts> ] [ <helloptions> ] [ <dbdoptions> ] [ <lastnonhello> ] [ <deadtimer> ] [ <pacingtimer> ] [ <dbdrxmtimer> ] [ <reqrxmtimer> ] [ <lsutimer> ] [ <rerxmtimer> ] [ <fastrerxmtimer> ] [ <lsacktimer> ] [ <grtimer> ] [ <helpermode> ] [ <helpercand> ] [ <helperterm> ] [ <senddbd> ] [ <sendlsreq> ] [ <sendlsu> ] [ <sendlsurxmt> ] [ <sendlsack> ] [ <sendlsreqreply> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

virtual-links

Virtual link information

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_vlink

(Optional)

name

(Optional)

nbr_rid

(Optional)

if_state

(Optional)

transit_area

(Optional)

nh_intf

(Optional)

dc_enabled

(Optional)

nbr_addr

(Optional)

transit_area_stub

(Optional)

transit_area_nssa

(Optional)

addr

(Optional)

masklen

(Optional)

area

(Optional)

if_cfg

(Optional)

state_str

(Optional)

type_str

(Optional)

cost

(Optional)

index

(Optional)

passive

(Optional)

mpls

(Optional)

transmit_delay

(Optional)

if_priority

(Optional)

dr_rid

(Optional)

dr_addr

(Optional)

bdr_rid

(Optional)

bdr_addr

(Optional)

nbr_total

(Optional)

nbr_flood

(Optional)

nbr_adjs

(Optional)

gr_nbr

(Optional)

hello_interval

(Optional)

dead_interval

(Optional)

wait_interval

(Optional)

rxmt_interval

(Optional)

hello_timer

(Optional)

wait_timer

(Optional)

pacing_timer

(Optional)

lsu_timer

(Optional)

lsack_timer

(Optional)

netlsa_throt_timer

(Optional)

auth_type

(Optional)

keychain_name

(Optional)

keychain_ready

(Optional)

auth_md5_keyid

(Optional)

link_lsa_cnt

(Optional)

link_lsa_crc

(Optional)

state

(Optional)

transition

(Optional)

lastchange

(Optional)

priority

(Optional)

ifid

(Optional)

dr

(Optional)

bdr

(Optional)

master

(Optional)

seqno

(Optional)

dbdallsentacked

(Optional)

dbdallsent

(Optional)

dbdallacked

(Optional)

lsaonreqlist

(Optional)

lsafromlastreq

(Optional)

lsreqrxmts

(Optional)

helloptions

(Optional)

dbdoptions

(Optional)

lastnonhello

(Optional)

deadtimer

(Optional)

pacingtimer

(Optional)

dbdrxmtimer

(Optional)

reqrxmtimer

(Optional)

lsutimer

(Optional)

rerxmtimer

(Optional)

fastrerxmtimer

(Optional)

lsacktimer

(Optional)

grtimer

(Optional)

helpermode

(Optional)

helpercand

(Optional)

helperterm

(Optional)

senddbd

(Optional)

sendlsreq

(Optional)

sendlsu

(Optional)

sendlsurxmt

(Optional)

sendlsack

(Optional)

sendlsreqreply

(Optional)

Command Mode

- /exec

show ip ospf virtual-links brief

show ip ospf [ <tag> ] virtual-links brief [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> <vlink_count> [ TABLE_vlink <nbr_rid> <vlink_num> <transit_area> <cost> <if_state> ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ospf

Display OSPF status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

virtual-links

Virtual link information

brief

Display summary of OSPF virtual links

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

vlink_count

(Optional)

TABLE_vlink

(Optional)

nbr_rid

(Optional)

vlink_num

(Optional)

transit_area

(Optional)

cost

(Optional)

if_state

(Optional)

Command Mode

- /exec

show ip overlay-traffic

show ip overlay-traffic

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

overlay-traffic

Display IP overlay software processed traffic statistics

Command Mode

- /exec

show ip pim bitfield

show ip pim bitfield

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

bitfield

Display compressed bitfield details

Command Mode

- /exec

show ip pim config-sanity

show ip pim config-sanity

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

config-sanity

Configuration Sanity check

Command Mode

- /exec

show ip pim df

show ip pim df [ <rp-or-group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ internal ] [ __readonly__ <out-context> { TABLE_rp <rp-addr> <df-ordinal> <df-bits> <df-bits-count> <metric-pref> <metric> { TABLE_grange <grange-grp> <grange-masklen> } { TABLE_iod <if-name> <df-winner> <df-state> <winner-metric-pref> <winner-metric> <uptime> <is-rpf> } } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

df

Display Bidir Designated Forwarders

rp-or-group

(Optional) Display for a single RP or group address

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

internal

(Optional) Commands for internal use

__readonly__

(Optional)

out-context

(Optional)

TABLE_rp

(Optional)

rp-addr

(Optional)

df-ordinal

(Optional)

df-bits

(Optional)

df-bits-count

(Optional)

metric-pref

(Optional)

metric

(Optional)

TABLE_grange

(Optional)

grange-grp

(Optional)

grange-masklen

(Optional)

TABLE_iod

(Optional)

if-name

(Optional)

df-winner

(Optional)

df-state

(Optional)

winner-metric-pref

(Optional)

winner-metric

(Optional)

uptime

(Optional)

is-rpf

(Optional)

Command Mode

- /exec

show ip pim event-history

show ip pim [ internal ] event-history { errors | msgs | <pim-event-hist-buf-name> | statistics }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

PIM global configuration commands

internal

(Optional) Commands for internal use

event-history

Show various event logs of PIM

errors

Show error logs of PIM

msgs

Show various message logs of PIM

pim-event-hist-buf-name

Show event hist buffer name

statistics

Show the state and size of the buffer

Command Mode

- /exec

show ip pim fabric info

show ip pim fabric info

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

fabric

Fabric functionality

info

show the fabric info

Command Mode

- /exec

show ip pim fabric legacy-vlans

show ip pim fabric legacy-vlans

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

fabric

Fabric functionality

legacy-vlans

Show legacy VLANs on this switch

Command Mode

- /exec

show ip pim group-range

show ip pim group-range [ <group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-context> { TABLE_group <grp-addr> <invalid-grp> <mode> <rp-addr> <sh-tree-only-range> <action> <origin> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

group-range

Display the various group-ranges

group

(Optional) IP address of group to display

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-context

(Optional)

TABLE_group

(Optional)

invalid-grp

(Optional)

grp-addr

(Optional)

mode

(Optional)

rp-addr

(Optional)

sh-tree-only-range

(Optional)

action

(Optional)

origin

(Optional)

Command Mode

- /exec

show ip pim interface show ip pim interface

show ip pim interface <interface> | show ip pim interface [ brief ] [ internal ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-context> { TABLE_iod <if-name> <if-addr> <dr> <nbr-cnt> <is-border> <is-iface-in-cib> <is-pim-enabled> <if-addr-summary> <if-status> <dr-priority> <no-dr-priority> <hello-interval-sec> <hello-interval-msec> <hello-timer> <holdtime-sec> <holdtime-msec> <genid> <isauth-config> <is-passive> <nbr-policy-name> <jp-in-policy-name> <jp-out-policy-name> <last-cleared> <hello-sent> <hello-rcvd> <hello-early-sent> <jp-sent> <jp-rcvd> <assert-sent> <assert-rcvd> <graft-sent> <graft-rcvd> <graft-ack-sent> <graft-ack-rcvd> <df-offer-sent> <df-offer-rcvd> <df-winner-sent> <df-winner-rcvd> <df-backoff-sent> <df-backoff-rcvd> <pass-sent> <pass-rcvd> <cksum-errors> <invalid-errors> <invalid-df-errors> <auth-failed> <pak-len-errors> <ver-errors> <pkts-self> <pkts-non-nbr> <pkts-on-passive> <jp-rcvd-on-rpf> <jp-rcvd-no-rp> <jp-rcvd-wrong-rp> <jp-rcvd-for-ssm> <jp-rcvd-for-bidir> <jp-in-policy-filter> <jp-out-policy-filter> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

interface

Display PIM interface related information

interface

Interface name of single interface to display

brief

(Optional) Display one line status per interface

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

internal

(Optional) Commands for internal use

__readonly__

(Optional)

out-context

(Optional)

TABLE_iod

(Optional)

if-name

(Optional)

if-addr

(Optional)

dr

(Optional)

nbr-cnt

(Optional)

is-iface-in-cib

(Optional)

is-pim-enabled

(Optional)

is-border

(Optional)

if-addr-summary

(Optional)

if-status

(Optional)

dr-priority

(Optional)

no-dr-priority

(Optional)

hello-interval-sec

(Optional)

hello-interval-msec

(Optional)

hello-timer

(Optional)

holdtime-sec

(Optional)

holdtime-msec

(Optional)

genid

(Optional)

isauth-config

(Optional)

is-passive

(Optional)

nbr-policy-name

(Optional)

jp-in-policy-name

(Optional)

jp-out-policy-name

(Optional)

last-cleared

(Optional)

hello-sent

(Optional)

hello-rcvd

(Optional)

hello-early-sent

(Optional)

jp-sent

(Optional)

jp-rcvd

(Optional)

assert-sent

(Optional)

assert-rcvd

(Optional)

graft-sent

(Optional)

graft-rcvd

(Optional)

graft-ack-sent

(Optional)

graft-ack-rcvd

(Optional)

df-offer-sent

(Optional)

df-offer-rcvd

(Optional)

df-winner-sent

(Optional)

df-winner-rcvd

(Optional)

df-backoff-sent

(Optional)

df-backoff-rcvd

(Optional)

pass-sent

(Optional)

pass-rcvd

(Optional)

cksum-errors

(Optional)

invalid-errors

(Optional)

invalid-df-errors

(Optional)

auth-failed

(Optional)

pak-len-errors

(Optional)

ver-errors

(Optional)

pkts-self

(Optional)

pkts-non-nbr

(Optional)

pkts-on-passive

(Optional)

jp-rcvd-on-rpf

(Optional)

jp-rcvd-no-rp

(Optional)

jp-rcvd-wrong-rp

(Optional)

jp-rcvd-for-ssm

(Optional)

jp-rcvd-for-bidir

(Optional)

jp-in-policy-filter

(Optional)

jp-out-policy-filter

(Optional)

Command Mode

- /exec

show ip pim internal

show ip pim internal

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

internal

Commands for internal use

Command Mode

- /exec

show ip pim internal errors

show ip pim internal errors

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

internal

Commands for internal use

errors

Show PIM errors

Command Mode

- /exec

show ip pim internal interface-txlist vrf

show ip pim internal interface-txlist vrf [ <vrf-known-name> | all ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

internal

Commands for internal use

interface-txlist

Show interface txlist

vrf

Display per-VRF information

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show ip pim internal library

show ip pim internal { library-info | iod-cache }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

PIM global configuration commands

internal

Commands for internal use

library-info

Show various event logs of library

iod-cache

Show PIM Interface IOD->Ifindex mapping cache

Command Mode

- /exec

show ip pim internal mem-stats

show ip pim internal mem-stats [ shared | all ] [ no-libs ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

internal

Commands for internal use

mem-stats

Show memory allocation statistics

shared

(Optional) Display shared memory statistics

all

(Optional) Display private and shared memory statistics

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

Command Mode

- /exec

show ip pim internal pss-dump

show ip pim internal pss-dump [ df-states | interfaces | rp | auto-rp | bsr ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

internal

Commands for internal use

pss-dump

Dispaly info stored in PSS

df-states

(Optional) DF elected winner / loser information

interfaces

(Optional) Interface information

rp

(Optional) RP information

auto-rp

(Optional) Auto-RP information

bsr

(Optional) BSR information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show ip pim internal vpc

show ip pim internal { { vpc [ rpf-source [ vrf { <vrf-name> | <vrf-known-name> | all } ] ] } | emulated-switch } [ __readonly__ TABLE_vpc <mcecm_reg> <mcec_tl_reg> <mct_up> <mct_name> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

internal

Commands for internal use

vpc

Display vpc information

rpf-source

(Optional) Display RPF-Source information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

emulated-switch

Display Emulated Switch related information

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vpc

(Optional)

mcecm_reg

(Optional)

mcec_tl_reg

(Optional)

mct_name

(Optional)

mct_up

(Optional)

Command Mode

- /exec

show ip pim lisp encap

show ip pim lisp encap

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

lisp

LISP related information

encap

All the encap indices

Command Mode

- /exec

show ip pim mdt

show ip pim mdt [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <out_context> <mti> <mti_status> <default_mdt_grp> <grp_mode> <asm_shared_tree> <mti_config_mtu> <mti_active_mtu> <mdt_src_if> <bgp_update_src_if> <hello_interval> <jp_interval> <data_mdt_join_interval> <data_switchover_interval> <data_holddown_interval> <data_timeout_interval> <mdt_src> <mdt_src_if> <bgp_rd> <bgp_rd_set> <send_join_count> <rcvd_join_count> { TABLE_data_mdt <grange_prefix> <grange_mask_len> <threshold> [ <policy_name> ] } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

mdt

Display MDT information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

out_context

(Optional)

mti

(Optional)

mti_status

(Optional)

default_mdt_grp

(Optional)

grp_mode

(Optional)

asm_shared_tree

(Optional)

mti_config_mtu

(Optional)

mti_active_mtu

(Optional)

mdt_src_if

(Optional)

bgp_update_src_if

(Optional)

hello_interval

(Optional)

jp_interval

(Optional)

data_mdt_join_interval

(Optional)

data_switchover_interval

(Optional)

data_holddown_interval

(Optional)

data_timeout_interval

(Optional)

mdt_src

(Optional)

mdt_src_if

(Optional)

bgp_rd

(Optional)

bgp_rd_set

(Optional)

send_join_count

(Optional)

rcvd_join_count

(Optional)

TABLE_data_mdt

(Optional)

grange_prefix

(Optional)

grange_mask_len

(Optional)

threshold

(Optional)

policy_name

(Optional)

Command Mode

- /exec

show ip pim mdt bgp

show ip pim mdt bgp [ mdt-source <src-addr> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

mdt

Display MDT information

bgp

Display BGP related information

mdt-source

(Optional) Source address of MVPN neighbor

src-addr

(Optional) Source Address

Command Mode

- /exec

show ip pim mdt history interval

show ip pim mdt history interval <min> [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <out_context> [ { TABLE_entry <csrc> <cgrp> <psrc> <pgrp> <uptime> <send_count> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

mdt

Display MDT information

history

Display MDT Data Join Send Histoy

interval

Display in specified interval

min

Minutes

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

out_context

(Optional)

TABLE_entry

(Optional)

csrc

(Optional)

cgrp

(Optional)

psrc

(Optional)

pgrp

(Optional)

uptime

(Optional)

send_count

(Optional)

Command Mode

- /exec

show ip pim mdt receive

show ip pim mdt receive [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <out_context> [ { TABLE_entry <csrc> <cgrp> <psrc> <pgrp> <uptime> <expires> <recv_count> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

mdt

Display MDT information

receive

Display Received Data Joins Information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

detail

(Optional) Display detailed information

__readonly__

(Optional)

TABLE_vrf

(Optional)

out_context

(Optional)

TABLE_entry

(Optional)

csrc

(Optional)

cgrp

(Optional)

psrc

(Optional)

pgrp

(Optional)

uptime

(Optional)

expires

(Optional)

recv_count

(Optional)

Command Mode

- /exec

show ip pim mdt send

show ip pim mdt send [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <out_context> [ { TABLE_entry <csrc> <cgrp> <psrc> <pgrp> <uptime> <send_count> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

mdt

Display MDT information

send

Display MDT Data Join Send Information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

detail

(Optional) Display detailed information

__readonly__

(Optional)

TABLE_vrf

(Optional)

out_context

(Optional)

TABLE_entry

(Optional)

csrc

(Optional)

cgrp

(Optional)

psrc

(Optional)

pgrp

(Optional)

uptime

(Optional)

send_count

(Optional)

Command Mode

- /exec

show ip pim neighbor

show ip pim neighbor { [ <interface> ] | [ <ipaddr> ] } [ detail | internal ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-context> { TABLE_iod <if-name> <if-addr> <is-iface-in-cib> <is-pim-enabled> { TABLE_neighbor <nbr-addr> <is-nbr-in-cib> <does-nbr-exist> <uptime> <expires> <longest-hello-intvl> <bidir-capable> <dr-priority> <no-dr-priority> } } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

neighbor

Display PIM neighbor related information

interface

(Optional) Display neighbors on single interface name

ipaddr

(Optional) IP address of single neighbor to display

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

detail

(Optional) Display detailed information

internal

(Optional) Commands for internal use

__readonly__

(Optional)

out-context

(Optional)

TABLE_iod

(Optional)

if-name

(Optional)

if-addr

(Optional)

is-iface-in-cib

(Optional)

is-pim-enabled

(Optional)

TABLE_neighbor

(Optional)

nbr-addr

(Optional)

is-nbr-in-cib

(Optional)

does-nbr-exist

(Optional)

uptime

(Optional)

expires

(Optional)

longest-hello-intvl

(Optional)

bidir-capable

(Optional)

dr-priority

(Optional)

no-dr-priority

(Optional)

Command Mode

- /exec

show ip pim oif-list

show ip pim oif-list <group> [ <source> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name> { TABLE_grp <mcast-addrs> <incoming-intf> <rpf-nbr> <timeout-interval> <oif-list-count> [ { TABLE_oiflist <oif-name> } ] <timeout-list-count> [ { TABLE_timeoutlist <timeoutoif-name> } ] <immediate-list-count> [ { TABLE_immediatelist <immediateoif-name> } ] <immediate-timeout-list-count> [ { TABLE_immediatetimeoutlist <immediatetimeoutoif-name> } ] <sgr-prune-list-count> [ { TABLE_sgrprunelist <sgrprunelistoif-name> } ] } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

oif-list

Display interfaces for oif-list of PIM route

source

(Optional) Source address to display

group

Group address to display

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name

(Optional)

TABLE_grp

(Optional)

mcast-addrs

(Optional)

incoming-intf

(Optional)

rpf-nbr

(Optional)

timeout-interval

(Optional)

oif-list-count

(Optional)

TABLE_oiflist

(Optional)

oif-name

(Optional)

timeout-list-count

(Optional)

TABLE_timeoutlist

(Optional)

timeoutoif-name

(Optional)

immediate-list-count

(Optional)

TABLE_immediatelist

(Optional)

immediateoif-name

(Optional)

immediate-timeout-list-count

(Optional)

TABLE_immediatetimeoutlist

(Optional)

immediatetimeoutoif-name

(Optional)

sgr-prune-list-count

(Optional)

TABLE_sgrprunelist

(Optional)

sgrprunelistoif-name

(Optional)

Command Mode

- /exec

show ip pim policy statistics

show ip pim policy statistics { register-policy | bsr { bsr-policy | rp-candidate-policy } | auto-rp { rp-candidate-policy | mapping-agent-policy } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

PIM global configuration commands

policy

Policy related information

statistics

Policy statistics

register-policy

Show statistics for register-policy

bsr

Bootstrap protocol RP-distribution policy

bsr-policy

Statistics for filtered BSR messages

rp-candidate-policy

Statistics for filtered RP candidate messages

auto-rp

Statistics for auto-rp messages

rp-candidate-policy

Statistics for filtered RP candidate messages

mapping-agent-policy

Statistics for filtered mapping agent messages

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show ip pim policy statistics jp

show ip pim policy statistics { jp-policy | neighbor-policy } <interface>

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

PIM global configuration commands

policy

Policy related information

statistics

Policy statistics

jp-policy

Statistics for jp-policy

neighbor-policy

Statistics for neighbor-policy

interface

Interface to display policy statistics for

Command Mode

- /exec

show ip pim route

show ip pim route { [ bitfield ] | <source> <group> | <group> [ <source> ] [ bitfield ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <context-name> <route-count> { TABLE_addr <mcast-addrs> <rp-addr> <rp-local> <bidir> <sgexpire> <sgrexpire> <timeleft> <rp-bit> <register> <assert-timeout> <assert-metric-pref> <assert-metric> { TABLE_rpf <intf-name> <rpf-nbr-1> <rpf-nbr-addr> <rpf-nbr-2> <metric-pref> <route-metric> } { TABLE_oif <count> <bf-str> } { TABLE_timeout <count> <bf-str> } { TABLE_immediate <count> <bf-str> } { TABLE_immediatetimeout <count> <bf-str> } { TABLE_sgrprunelist <count> <bf-str> } <timeout-interval> <jp-holdtime> <encap-index> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

route

Display PIM specific route information

group

Group address to display

source

Source address to display

bitfield

(Optional) Display details of each bitfield for PIM route

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

context-name

(Optional)

route-count

(Optional)

TABLE_addr

(Optional)

mcast-addrs

(Optional)

rp-addr

(Optional)

rp-local

(Optional)

bidir

(Optional)

sgexpire

(Optional)

sgrexpire

(Optional)

timeleft

(Optional)

rp-bit

(Optional)

register

(Optional)

assert-timeout

(Optional)

assert-metric-pref

(Optional)

assert-metric

(Optional)

TABLE_rpf

(Optional)

intf-name

(Optional)

rpf-nbr-1

(Optional)

rpf-nbr-addr

(Optional)

rpf-nbr-2

(Optional)

metric-pref

(Optional)

route-metric

(Optional)

TABLE_oif

(Optional)

count

(Optional)

bf-str

(Optional)

TABLE_timeout

(Optional)

count

(Optional)

bf-str

(Optional)

TABLE_immediate

(Optional)

count

(Optional)

bf-str

(Optional)

TABLE_immediatetimeout

(Optional)

count

(Optional)

bf-str

(Optional)

TABLE_sgrprunelist

(Optional)

count

(Optional)

bf-str

(Optional)

timeout-interval

(Optional)

jp-holdtime

(Optional)

encap-index

(Optional)

Command Mode

- /exec

show ip pim route internal

show ip pim route internal [ <source> <group> | <group> [ <source> ] ] { [ detail ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

PIM global configuration commands

route

Display PIM internal route cache

internal

Commands for internal use

group

(Optional) Group address to display

source

(Optional) Source address to display

detail

(Optional) Display detailed information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show ip pim rp-hash

show ip pim rp-hash <group> [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-context> [ <rp-found> ] [ <is-rp-bsr-learnt> ] [ <out-group1> <rp-addr1> ] [ <out-group> <hash-length> <out-bsr> ] [ { TABLE_rp <rp-addr> <hash> <isbest_hash> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

rp-hash

Display RP hash value for group

group

Group address for RP lookup

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-context

(Optional)

rp-found

(Optional)

is-rp-bsr-learnt

(Optional)

out-group1

(Optional)

rp-addr1

(Optional)

out-group

(Optional)

hash-length

(Optional)

out-bsr

(Optional)

TABLE_rp

(Optional)

rp-addr

(Optional)

hash

(Optional)

isbest_hash

(Optional)

Command Mode

- /exec

show ip pim rp

show ip pim rp [ <group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-context> <is-bsr-enabled> <is-bsr-listen-only> <is-bsr-forward-only> <are-we-bsr> <bsr-address> <is-bsr-address> <bsr-priority> <bsr-hash-masklen> <bs-timer> <bsr-uptime> <bsr-expires> <is-autorp-enabled> <is-autorp-listen-only> <is-autorp-forward-only> <are-we-autorp> <autorp-address> <is-autorp-address> <autorp-dis-timer> <autorp-up-time> <autorp-expire-time> <rp-cand-policy-name> <bsr-policy-name> <rp-announce-policy-name> <rp-discovery-policy-name> { TABLE_anycast_rp <anycast-rp-addr> { TABLE_arp_rp <arp-rp-addr> <is-rpaddr-local> } } { TABLE_rp <rp-addr> <is-rp-in-cib> <df-ordinal> <rp-uptime> <rp-priority> <autorp-expires> <bsr-rp-expires> <autorp-info-src> <bsr-info-src> <is-rp-static> <static-rp-group-map> { TABLE_grange <grange-grp> <grange-masklen> <is-bidir-grp> <is-autorp-rp-owner> <is-bsr-rp-owner> <is-static-rp-owner> } } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

rp

Display PIM RP, Auto-RP, and BSR related information

group

(Optional) Display RP for group address

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-context

(Optional)

is-bsr-enabled

(Optional)

is-bsr-listen-only

(Optional)

is-bsr-forward-only

(Optional)

are-we-bsr

(Optional)

bsr-address

(Optional)

is-bsr-address

(Optional)

bsr-priority

(Optional)

bsr-hash-masklen

(Optional)

bs-timer

(Optional)

bsr-uptime

(Optional)

bsr-expires

(Optional)

is-autorp-enabled

(Optional)

is-autorp-listen-only

(Optional)

is-autorp-forward-only

(Optional)

are-we-autorp

(Optional)

autorp-address

(Optional)

is-autorp-address

(Optional)

autorp-dis-timer

(Optional)

autorp-up-time

(Optional)

autorp-expire-time

(Optional)

rp-cand-policy-name

(Optional)

bsr-policy-name

(Optional)

rp-announce-policy-name

(Optional)

rp-discovery-policy-name

(Optional)

TABLE_anycast_rp

(Optional)

anycast-rp-addr

(Optional)

TABLE_arp_rp

(Optional)

arp-rp-addr

(Optional)

is-rpaddr-local

(Optional)

TABLE_rp

(Optional)

rp-addr

(Optional)

is-rp-in-cib

(Optional)

df-ordinal

(Optional)

rp-uptime

(Optional)

rp-priority

(Optional)

autorp-expires

(Optional)

bsr-rp-expires

(Optional)

autorp-info-src

(Optional)

bsr-info-src

(Optional)

is-rp-static

(Optional)

static-rp-group-map

(Optional)

TABLE_grange

(Optional)

grange-grp

(Optional)

grange-masklen

(Optional)

is-bidir-grp

(Optional)

is-autorp-rp-owner

(Optional)

is-bsr-rp-owner

(Optional)

is-static-rp-owner

(Optional)

Command Mode

- /exec

show ip pim statistics

show ip pim statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <uptime> <reg-sent> <reg-rcvd> <null-reg-sent> <null-reg-rcvd> <reg-stop-sent> <reg-stop-rcvd> <reg-rcvd-not-rp> <reg-rcvd-for-ssm> <reg-rcvd-for-bidir> <bootstrap-sent> <bootstrap-rcvd> <cand-rp-sent> <cand-rp-rcvd> <bs-no-nbr> <bs-border-deny> <bs-len-errors> <bs-rpf-failed> <bs-no-listen> <candrp-border-deny> <candrp-no-listen> <autorp-announce-sent> <autorp-announce-rcvd> <autorp-discovery-sent> <autorp-discovery-rcvd> <autorp-rpf-failed> <autorp-border-deny> <autorp-invalid-type> <autorp-ttl-expired> <autorp-no-listen> <ctrl-no-route> <data-no-route> <no-state> <create-state> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

statistics

Packet counter statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

uptime

(Optional)

reg-sent

(Optional)

reg-rcvd

(Optional)

null-reg-sent

(Optional)

null-reg-rcvd

(Optional)

reg-stop-sent

(Optional)

reg-stop-rcvd

(Optional)

reg-rcvd-not-rp

(Optional)

reg-rcvd-for-ssm

(Optional)

reg-rcvd-for-bidir

(Optional)

bootstrap-sent

(Optional)

bootstrap-rcvd

(Optional)

cand-rp-sent

(Optional)

cand-rp-rcvd

(Optional)

bs-no-nbr

(Optional)

bs-border-deny

(Optional)

bs-len-errors

(Optional)

bs-rpf-failed

(Optional)

bs-no-listen

(Optional)

candrp-border-deny

(Optional)

candrp-no-listen

(Optional)

autorp-announce-sent

(Optional)

autorp-announce-rcvd

(Optional)

autorp-discovery-sent

(Optional)

autorp-discovery-rcvd

(Optional)

autorp-rpf-failed

(Optional)

autorp-border-deny

(Optional)

autorp-invalid-type

(Optional)

autorp-ttl-expired

(Optional)

autorp-no-listen

(Optional)

ctrl-no-route

(Optional)

data-no-route

(Optional)

no-state

(Optional)

create-state

(Optional)

Command Mode

- /exec

show ip pim vrf

show ip pim vrf [ { <vrf-name> | <vrf-known-name> | all } ] [ detail | internal ] [ __readonly__ { TABLE_context <out-context> <context-id> <table-id> <count> <bfd> <mvpn> } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

pim

Display PIM status and configuration

vrf

Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display all VRFs PIM is configured for

detail

(Optional) Display detailed information

internal

(Optional) VRF related internal information

__readonly__

(Optional)

TABLE_context

(Optional)

out-context

(Optional)

context-id

(Optional)

table-id

(Optional)

count

(Optional)

bfd

(Optional)

mvpn

(Optional)

Command Mode

- /exec

show ip ping source-interface

show ip ping source-interface [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ { TABLE_ippingvrf <vrfname> <ifname> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ping

Display ping client information

source-interface

Display source interface information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_ippingvrf

(Optional) source interface of ping

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip ping source-interface vrf all

show ip ping source-interface vrf all [ __readonly__ [ { TABLE_ipping <vrfname> <ifname> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ping

Display ping client information

source-interface

Display source interface information

vrf

Display per-VRF information

all

Display entries for all vrfs

__readonly__

(Optional)

TABLE_ipping

(Optional) source interface of ping

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip policy

show ip policy [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ detail ] [ __readonly__ TABLE_pbr <interface> <rmap> <status> <vrf_name> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

policy

Policy routing

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_pbr

(Optional)

interface

(Optional)

rmap

(Optional)

status

(Optional)

vrf_name

(Optional)

Command Mode

- /exec

show ip prefix-list

show ip prefix-list { { [ detail | summary ] [ <ipv4-pfl-name> | <ipv4-pfl-cfg-name> ] } | { { <ipv4-pfl-name> | <ipv4-pfl-cfg-name> } seq <seq-no> } | { { <ipv4-pfl-name> | <ipv4-pfl-cfg-name> } <prefix> [ first-match | longer ] } } [ __readonly__ TABLE_ip_pfl <name> <seq> <action> <rule> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

detail

(Optional) Show detailed information

summary

(Optional) Show summarized information

prefix-list

List IP prefix lists

ipv4-pfl-name

(Optional) Name of prefix-list

ipv4-pfl-cfg-name

(Optional) Known prefix-list name

seq

Sequence number

seq-no

Sequence number

prefix

IP prefix network/length, e.g., 35.0.0.0/8

first-match

(Optional) Find the first match

longer

(Optional) Find the more specific entries

__readonly__

(Optional)

TABLE_ip_pfl

(Optional)

name

(Optional)

seq

(Optional)

action

(Optional)

rule

(Optional)

Command Mode

- /exec

show ip process

show ip process [ api ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_ip_pro_vrf [ { <pro-cntxt-name> <pro-cntxt-id> <pro-base-tid> <pro-auto-disc> <pro-atuo-add> <pro-null-bcast> <auto-punt-bcast> <static-disc> <static-def-route> <ip-unreach> } ] [ TABLE_pro_api [ <api-vrf> <api-cntxt-id> <api-base-tid> <api-ip-addr> <api-rtr-id-iod> ] ] [ TABLE_iod [ { <entry-iod> } ] ] [ TABLE_local_addr [ { <local-addr> } ] ] ] [ TABLE_ip_pro_all { <all-pro-cntxt-name> <all-pro-cntxt-id> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

process

Display IP global information

api

(Optional) Show api values

vrf

(Optional) Display per-VRF information

all

(Optional) Display all VRFs

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_ip_pro_vrf

(Optional)

pro-cntxt-name

(Optional)

pro-cntxt-id

(Optional)

pro-base-tid

(Optional)

pro-auto-disc

(Optional)

pro-atuo-add

(Optional)

pro-null-bcast

(Optional)

auto-punt-bcast

(Optional)

static-disc

(Optional)

static-def-route

(Optional)

ip-unreach

(Optional)

TABLE_pro_api

(Optional)

api-vrf

(Optional)

api-cntxt-id

(Optional)

api-base-tid

(Optional)

api-ip-addr

(Optional)

api-rtr-id-iod

(Optional)

TABLE_iod

(Optional)

entry-iod

(Optional)

TABLE_local_addr

(Optional)

local-addr

(Optional)

TABLE_ip_pro_all

(Optional)

all-pro-cntxt-name

(Optional)

all-pro-cntxt-id

(Optional)

Command Mode

- /exec

show ip rip

show { ipv6 | ip } rip [ instance <inst> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_inst <inst-name> TABLE_vrf <vrf> <port> <mcast-grp> <admin-dist> <update-tmr> <expire-tmr> <garbage-tmr> <def-metric> <max-paths> <def-rt-distrib> <def-distrib-always> <process-disabled> <out-of-mem> [ TABLE_afi <af> { TABLE_interface <if-name> } TABLE_redistrib <redistributing> { TABLE_clients <pibname> <policy> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

ip

Display IP information

rip

Display RIP routing protocol status

instance

(Optional) Process ID

inst

(Optional) Process ID

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_inst

(Optional)

inst-name

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

port

(Optional)

mcast-grp

(Optional)

admin-dist

(Optional)

update-tmr

(Optional)

expire-tmr

(Optional)

garbage-tmr

(Optional)

def-metric

(Optional)

max-paths

(Optional)

def-rt-distrib

(Optional)

def-distrib-always

(Optional)

process-disabled

(Optional)

out-of-mem

(Optional)

TABLE_afi

(Optional)

af

(Optional)

TABLE_interface

(Optional)

if-name

(Optional)

TABLE_redistrib

(Optional)

redistributing

(Optional)

TABLE_clients

(Optional)

pibname

(Optional)

policy

(Optional)

Command Mode

- /exec

show ip rip interface

show { ipv6 | ip } rip [ instance <inst> ] interface [ <interface> ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_inst <inst-name> TABLE_vrf <vrf> [ TABLE_inter <if-name> <if-status> <protocol-up> <local-only> <no-addr-conf> <if-addr> <if-mask> <if-metric> <poison-reverse> <if-passive> <route-dist-filter> <in-policy> <out-policy> [ { TABLE_auth <auth-ena> <auth-type> <auth-keychain> } ] [ TABLE_detail <import-routes> <periodic-updates> <trigger-updates> <out-mcast-request> <out-ucast-update> <out-ucast-request> <in-mcast-update> <in-mcast-request> <in-ucast-update> <in-ucast-request> <bad-pkt> <bad-route> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

ip

Display IP information

rip

Display RIP routing protocol status

instance

(Optional) Process ID

inst

(Optional) Process ID

interface

RIP interface

interface

(Optional) RIP interface

detail

(Optional) Detailed information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_inst

(Optional)

inst-name

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

TABLE_inter

(Optional)

if-name

(Optional)

if-status

(Optional)

protocol-up

(Optional)

local-only

(Optional)

no-addr-conf

(Optional)

if-addr

(Optional)

if-mask

(Optional)

if-metric

(Optional)

poison-reverse

(Optional)

if-passive

(Optional)

route-dist-filter

(Optional)

in-policy

(Optional)

out-policy

(Optional)

TABLE_auth

(Optional)

auth-ena

(Optional)

auth-type

(Optional)

auth-keychain

(Optional)

TABLE_detail

(Optional)

import-routes

(Optional)

periodic-updates

(Optional)

trigger-updates

(Optional)

out-mcast-request

(Optional)

out-ucast-update

(Optional)

out-ucast-request

(Optional)

in-mcast-update

(Optional)

in-mcast-request

(Optional)

in-ucast-update

(Optional)

in-ucast-request

(Optional)

bad-pkt

(Optional)

bad-route

(Optional)

Command Mode

- /exec

show ip rip internal event-history

show { ipv6 | ip } rip [ instance <tag> ] internal event-history { errors | msgs | database | packet | event | input | output | policy | timer | cli }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

rip

Display RIP routing protocol status

instance

(Optional) Process ID

tag

(Optional) Process ID

internal

Commands for internal use

event-history

Show various event logs of RIP

errors

Show error logs of RIP

msgs

Show various message logs of RIP

database

Show database logs of RIP

packet

Show packet logs of RIP

event

Show event logs of RIP

input

Show input logs of RIP

output

Show output logs of RIP

policy

Show policy logs of RIP

timer

Show timer logs of RIP

cli

Show cli logs of RIP

Command Mode

- /exec

show ip rip internal library-info

show { ipv6 | ip } rip [ instance <tag> ] internal library-info

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

rip

Display RIP routing protocol status

instance

(Optional) Process ID

tag

(Optional) Process ID

internal

Commands for internal use

library-info

Show various event logs of library

Command Mode

- /exec

show ip rip internal mem-stats

show { ipv6 | ip } rip [ instance <tag> ] internal mem-stats [ all | shared ] [ no-libs ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

rip

Display RIP routing protocol status

instance

(Optional) Process ID

tag

(Optional) Process ID

internal

Commands for internal use

mem-stats

Show memory allocation statistics

all

(Optional) Display private and shared memory details

shared

(Optional) Display shared memory details

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

Command Mode

- /exec

show ip rip memory

show { ipv6 | ip } rip [ instance <inst> ] memory [ __readonly__ TABLE_inst <inst-name> <type> <size> <count> <hwm> <slab> <overhead> <total> TABLE_total <total-overhead> <total-total> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

rip

Display RIP status and configuration

instance

(Optional) Process ID

inst

(Optional) Process ID

memory

Display RIP memory usage information

__readonly__

(Optional)

TABLE_inst

(Optional)

inst-name

(Optional)

type

(Optional)

size

(Optional)

count

(Optional)

hwm

(Optional)

slab

(Optional)

overhead

(Optional)

total

(Optional)

TABLE_total

(Optional)

total-overhead

(Optional)

total-total

(Optional)

Command Mode

- /exec

show ip rip neighbor

show { ipv6 | ip } rip [ instance <inst> ] neighbor [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_inst <inst-name> TABLE_vrf <vrf> <numberof-adj> <dead-timer-seconds> { TABLE_adj <adj-addr> <if-name> <last-response-sent> <last-response-rcvd> <last-request-sent> <last-request-rcvd> <last-response-sent-state> <last-response-rcvd-state> <last-request-sent-state> <last-request-rcvd-state> <in-bad-packets> <in-bad-routes> } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

ip

Display IP information

rip

Display RIP status and configuration

instance

(Optional) Process ID

inst

(Optional) Process ID

neighbor

RIP neighbor

interface

(Optional) RIP interface

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_inst

(Optional)

inst-name

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

numberof-adj

(Optional)

dead-timer-seconds

(Optional)

TABLE_adj

(Optional)

adj-addr

(Optional)

if-name

(Optional)

last-response-sent-state

(Optional)

last-response-sent

(Optional)

last-response-rcvd-state

(Optional)

last-response-rcvd

(Optional)

last-request-sent-state

(Optional)

last-request-sent

(Optional)

last-request-rcvd-state

(Optional)

last-request-rcvd

(Optional)

in-bad-packets

(Optional)

in-bad-routes

(Optional)

Command Mode

- /exec

show ip rip policy statistics redistribute

show ip rip [ instance <inst> ] policy statistics redistribute { bgp <as> | { eigrp | isis | <src-rip> | ospf } <tag> | direct | static } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rip

Display RIP routing protocol status

instance

(Optional) Process ID

inst

(Optional) Process ID

policy

Policy related information

statistics

Policy statistics

redistribute

RIP redistribute routes from other routing protocol

bgp

Border Gateway Protocol (BGP)

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

as

Autonomous system number

isis

Intermediate-to-intermediate (ISIS)

src-rip

Routing Information Protocol (RIP)

ospf

Open Shortest Path First (OSPFv2)

tag

Process tag

direct

Directly connected routes

static

Static routes

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show ip rip route

show { ipv6 | ip } rip [ instance <inst> ] route [ { <ipv6-prefix> | <ip-prefix> } [ { longer-prefixes | shorter-prefixes } ] ] [ summary ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_inst <inst-name> TABLE_vrf <vrf> [ { TABLE_route <best-route> <rt-prefix> <rt-mask> <rt-numnh> { TABLE_nexthop <nh-direct> <nh-redistrib> <nh-addr> <nh-interface> <nh-metric> <nh-tag> <nh-state> <nh-state-timer> } } ] [ { TABLE_summary <is-summary> <total-num-rts> <total-best-rts> <total-paths> { TABLE_rtspermask <mask-length> <rts-per-mask> } } ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

ip

Display IP information

rip

Display RIP routing protocol status

instance

(Optional) Process ID

inst

(Optional) Process ID

route

RIP routes

summary

(Optional) route counts

ip-prefix

(Optional) Exact prefix

longer-prefixes

(Optional) exact match and more specific routes

shorter-prefixes

(Optional) exact match and less specific routes

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_inst

(Optional)

inst-name

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

TABLE_route

(Optional)

best-route

(Optional)

rt-prefix

(Optional)

rt-mask

(Optional)

rt-numnh

(Optional)

TABLE_nexthop

(Optional)

nh-direct

(Optional)

nh-redistrib

(Optional)

nh-addr

(Optional)

nh-interface

(Optional)

nh-metric

(Optional)

nh-tag

(Optional)

nh-state

(Optional)

nh-state-timer

(Optional)

TABLE_summary

(Optional)

is-summary

(Optional)

total-num-rts

(Optional)

total-best-rts

(Optional)

total-paths

(Optional)

TABLE_rtspermask

(Optional)

mask-length

(Optional)

rts-per-mask

(Optional)

Command Mode

- /exec

show ip rip statistics

show { ipv6 | ip } rip [ instance <inst> ] statistics [ * | <interface> ] [ __readonly__ TABLE_inst <inst-name> TABLE_interface <if-name> <periodic-updates> <trigger-updates> <out-mcast-request> <out-ucast-update> <out-ucast-request> <in-mcast-update> <in-mcast-request> <in-ucast-update> <in-ucast-request> <bad-pkt> <bad-route> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

ip

Display IP information

rip

Display RIP status and configuration

instance

(Optional) Process ID

inst

(Optional) Process ID

statistics

RIP statistics

interface

(Optional) RIP interface

*

(Optional) RIP statistics for all interfaces

__readonly__

(Optional)

TABLE_inst

(Optional)

inst-name

(Optional)

TABLE_interface

(Optional)

if-name

(Optional)

periodic-updates

(Optional)

trigger-updates

(Optional)

out-mcast-request

(Optional)

out-ucast-update

(Optional)

out-ucast-request

(Optional)

in-mcast-update

(Optional)

in-mcast-request

(Optional)

in-ucast-update

(Optional)

in-ucast-request

(Optional)

bad-pkt

(Optional)

bad-route

(Optional)

Command Mode

- /exec

show ip router-id

show ip router-id [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

router-id

Display IP router identification

vrf

(Optional) Display per-VRF information

all

(Optional) Display all VRFs

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show ip rsvp

show ip rsvp [ __readonly__ [ <sup-state> <start-type> <restart-type> <ha-ena> <gr-ena> <hst-ena> <glb-router-id> <psr-ena> <local-epoch> ] [ TABLE_clients <clnt-name> <clnt-sap> <clnt-type> <clnt-batch-time> [ <clnt-lxsb> ] ] [ <bundle-ena> <bundle-time> <bundle-maxsz> ] [ <refresh-intvl> <refresh-miss> ] [ <refred-ena> <rr-init-rexmit-delay> <rr-rapid-rexmit-ena> <rr-ack-delay> ] [ <rate-limit-ena> <rate-limit-cap> <rate-limit-pace-intvl> ] [ <gr-tmr> [ <gr-tmr-expiry> ] ] [ <auth-ena> [ <key-src> ] [ <digest> ] [ <seq-winsize> ] [ <challenge> ] [ <lifetime> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

__readonly__

(Optional)

sup-state

(Optional)

start-type

(Optional)

restart-type

(Optional)

ha-ena

(Optional)

gr-ena

(Optional)

hst-ena

(Optional)

glb-router-id

(Optional)

psr-ena

(Optional)

local-epoch

(Optional)

bundle-ena

(Optional)

bundle-time

(Optional)

bundle-maxsz

(Optional)

refresh-intvl

(Optional)

refresh-miss

(Optional)

refred-ena

(Optional)

rr-rapid-rexmit-ena

(Optional)

rr-init-rexmit-delay

(Optional)

rr-ack-delay

(Optional)

rate-limit-ena

(Optional)

rate-limit-cap

(Optional)

rate-limit-pace-intvl

(Optional)

gr-tmr

(Optional)

gr-tmr-expiry

(Optional)

auth-ena

(Optional)

key-src

(Optional)

digest

(Optional)

seq-winsize

(Optional)

challenge

(Optional)

lifetime

(Optional)

TABLE_clients

(Optional)

clnt-name

(Optional)

clnt-sap

(Optional)

clnt-type

(Optional)

clnt-batch-time

(Optional)

clnt-lxsb

(Optional)

Command Mode

- /exec

show ip rsvp authentication

show ip rsvp authentication [ detail ] [ interface <ifname> ] [ from <ip_frm> ] [ to <ip_to> ] [ __readonly__ [ TABLE_authentication <src> <dst> <nbr-ip> <interface> <mode> [ <lifetime> <lifetime-left> <code> ] <key-src> <key-id> [ <code> ] [ <digest> <challenge> ] [ <tx-seq> ] [ <rx-seq> <seq-winsize> <seq-wincnt> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

authentication

Display RSVP Security Association information

detail

(Optional) Display detailed RSVP status

interface

(Optional) Display RSVP interface information

ifname

(Optional) Display RSVP interface information

from

(Optional) Starting point of association

ip_frm

(Optional) Address of starting point of association

to

(Optional) Ending point of association

ip_to

(Optional) Address of ending point of association

__readonly__

(Optional)

TABLE_authentication

(Optional)

src

(Optional)

dst

(Optional)

nbr-ip

(Optional)

interface

(Optional)

mode

(Optional)

key-src

(Optional)

key-id

(Optional)

code

(Optional)

lifetime

(Optional)

lifetime-left

(Optional)

digest

(Optional)

challenge

(Optional)

tx-seq

(Optional)

rx-seq

(Optional)

seq-winsize

(Optional)

seq-wincnt

(Optional)

Command Mode

- /exec

show ip rsvp counters

show ip rsvp counters [ interface <ifname> | teardown | authentication | all ] [ __readonly__ TABLE_counters [ <rsn-unspec> <pt-cnt-unspec> <rt-cnt-unspec> <rsn-path-tmo> <pt-cnt-path-tmo> <rt-cnt-path-tmo> <rsn-resv-tmo> <pt-cnt-resv-tmo> <rt-cnt-resv-tmo> <rsn-signaled> <pt-cnt-signaled> <rt-cnt-signaled> <rsn-mgmt> <pt-cnt-mgmt> <rt-cnt-mgmt> <rsn-policy> <pt-cnt-policy> <rt-cnt-policy> <rsn-proxy> <pt-cnt-proxy> <rt-cnt-proxy> <rsn-no-rsrc> <pt-cnt-no-rsrc> <rt-cnt-no-rsrc> <rsn-preempted> <pt-cnt-preempted> <rt-cnt-preempted> <rsn-msg-err> <pt-cnt-msg-err> <rt-cnt-msg-err> <rsn-internal> <pt-cnt-internal> <rt-cnt-internal> <rsn-traffic> <pt-cnt-traffic> <rt-cnt-traffic> <rsn-sync-unk> <pt-cnt-sync-unk> <rt-cnt-sync-unk> <rsn-gr-tmo> <pt-cnt-gr-tmo> <rt-cnt-gr-tmo> <rsn-link-nbor-down> <pt-cnt-link-nbor-down> <rt-cnt-link-nbor-down> <rsn-local-perr-psr> <pt-cnt-local-perr-psr> <rt-cnt-local-perr-psr> <rsn-network-perr-psr> <pt-cnt-network-perr-psr> <rt-cnt-network-perr-psr> <rsn-hello-st-tmo> <pt-cnt-hello-st-tmo> <rt-cnt-hello-st-tmo> <rsn-plr-bkup-del> <pt-cnt-plr-bkup-del> <rt-cnt-plr-bkup-del> <rsn-cli-clear> <pt-cnt-cli-clear> <rt-cnt-cli-clear> <rsn-restart-cmd> <pt-cnt-restart-cmd> <rt-cnt-restart-cmd> <rsn-intf-del> <pt-cnt-intf-del> <rt-cnt-intf-del> ] [ <auth_send_authenticated> <auth_send_authentication_failures> <auth-recv-valid-msgs> <auth-recv-total-err> <auth_recv_no_integrity> <auth_recv_bad_digest> <auth_recv_wrong_digest_type> <auth_recv_seq_num_dup> <auth_recv_seq_num_out_of_range> <auth_send_challenges_rcvd> <auth_send_challenge_responses_sent> <auth_recv_challenges_sent> <auth_recv_challenge_timeouts> <auth_recv_challenges_resent> <auth_recv_challenge_responses_rcvd> <auth_recv_during_challenge> <auth_recv_wrong_challenge_response> <auth_recv_challenge_response_dup> <auth_recv_challenge_response_late> ] [ [ <pkt-rx> <pkt-tx> <pkt-rx-err> <pkt-tx-err> ] <path-rx> <path-tx> <resv-rx> <resv-tx> <patherr-rx> <patherr-tx> <resverr-rx> <resverr-tx> <pathtear-rx> <pathtear-tx> <resvtear-rx> <resvtear-tx> <resvconf-rx> <resvconf-tx> <rtearconf-rx> <rtearconf-tx> <ack-rx> <ack-tx> <sref-rx> <sref-tx> <hello-rx> <hello-tx> <intchal-rx> <intchal-tx> <intresp-rx> <intresp-tx> <bundle-rx> <bundle-tx> <bundle-path-rx> <bundle-path-tx> <bundle-resv-rx> <bundle-resv-tx> <bundle-patherr-rx> <bundle-patherr-tx> <bundle-resverr-rx> <bundle-resverr-tx> <bundle-pathtear-rx> <bundle-pathtear-tx> <bundle-resvtear-rx> <bundle-resvtear-tx> <bundle-ack-rx> <bundle-ack-tx> ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

counters

Display RSVP statistics

interface

(Optional) Display RSVP interface information

ifname

(Optional) Display RSVP interface information

teardown

(Optional) Display signaling tear information

authentication

(Optional) Display RSVP Security Association information

all

(Optional) Display all information

__readonly__

(Optional)

TABLE_counters

(Optional)

rsn-unspec

(Optional)

pt-cnt-unspec

(Optional)

rt-cnt-unspec

(Optional)

rsn-path-tmo

(Optional)

pt-cnt-path-tmo

(Optional)

rt-cnt-path-tmo

(Optional)

rsn-resv-tmo

(Optional)

pt-cnt-resv-tmo

(Optional)

rt-cnt-resv-tmo

(Optional)

rsn-signaled

(Optional)

pt-cnt-signaled

(Optional)

rt-cnt-signaled

(Optional)

rsn-mgmt

(Optional)

pt-cnt-mgmt

(Optional)

rt-cnt-mgmt

(Optional)

rsn-policy

(Optional)

pt-cnt-policy

(Optional)

rt-cnt-policy

(Optional)

rsn-proxy

(Optional)

pt-cnt-proxy

(Optional)

rt-cnt-proxy

(Optional)

rsn-no-rsrc

(Optional)

pt-cnt-no-rsrc

(Optional)

rt-cnt-no-rsrc

(Optional)

rsn-preempted

(Optional)

pt-cnt-preempted

(Optional)

rt-cnt-preempted

(Optional)

rsn-msg-err

(Optional)

pt-cnt-msg-err

(Optional)

rt-cnt-msg-err

(Optional)

rsn-internal

(Optional)

pt-cnt-internal

(Optional)

rt-cnt-internal

(Optional)

rsn-traffic

(Optional)

pt-cnt-traffic

(Optional)

rt-cnt-traffic

(Optional)

rsn-sync-unk

(Optional)

pt-cnt-sync-unk

(Optional)

rt-cnt-sync-unk

(Optional)

rsn-gr-tmo

(Optional)

pt-cnt-gr-tmo

(Optional)

rt-cnt-gr-tmo

(Optional)

rsn-link-nbor-down

(Optional)

pt-cnt-link-nbor-down

(Optional)

rt-cnt-link-nbor-down

(Optional)

rsn-local-perr-psr

(Optional)

pt-cnt-local-perr-psr

(Optional)

rt-cnt-local-perr-psr

(Optional)

rsn-network-perr-psr

(Optional)

pt-cnt-network-perr-psr

(Optional)

rt-cnt-network-perr-psr

(Optional)

rsn-hello-st-tmo

(Optional)

pt-cnt-hello-st-tmo

(Optional)

rt-cnt-hello-st-tmo

(Optional)

rsn-plr-bkup-del

(Optional)

pt-cnt-plr-bkup-del

(Optional)

rt-cnt-plr-bkup-del

(Optional)

rsn-cli-clear

(Optional)

pt-cnt-cli-clear

(Optional)

rt-cnt-cli-clear

(Optional)

rsn-restart-cmd

(Optional)

pt-cnt-restart-cmd

(Optional)

rt-cnt-restart-cmd

(Optional)

rsn-intf-del

(Optional)

pt-cnt-intf-del

(Optional)

rt-cnt-intf-del

(Optional)

auth_send_authenticated

(Optional)

auth_send_authentication_failures

(Optional)

auth_send_challenges_rcvd

(Optional)

auth_send_challenge_responses_sent

(Optional)

auth-recv-total-err

(Optional)

auth-recv-valid-msgs

(Optional)

auth_recv_no_integrity

(Optional)

auth_recv_bad_digest

(Optional)

auth_recv_wrong_digest_type

(Optional)

auth_recv_seq_num_dup

(Optional)

auth_recv_seq_num_out_of_range

(Optional)

auth_recv_challenges_sent

(Optional)

auth_recv_challenge_timeouts

(Optional)

auth_recv_challenges_resent

(Optional)

auth_recv_challenge_responses_rcvd

(Optional)

auth_recv_during_challenge

(Optional)

auth_recv_wrong_challenge_response

(Optional)

auth_recv_challenge_response_dup

(Optional)

auth_recv_challenge_response_late

(Optional)

pkt-rx

(Optional)

pkt-tx

(Optional)

pkt-rx-err

(Optional)

pkt-tx-err

(Optional)

path-rx

(Optional)

path-tx

(Optional)

resv-rx

(Optional)

resv-tx

(Optional)

patherr-rx

(Optional)

patherr-tx

(Optional)

resverr-rx

(Optional)

resverr-tx

(Optional)

pathtear-rx

(Optional)

pathtear-tx

(Optional)

resvtear-rx

(Optional)

resvtear-tx

(Optional)

resvconf-rx

(Optional)

resvconf-tx

(Optional)

rtearconf-rx

(Optional)

rtearconf-tx

(Optional)

ack-rx

(Optional)

ack-tx

(Optional)

sref-rx

(Optional)

sref-tx

(Optional)

hello-rx

(Optional)

hello-tx

(Optional)

intchal-rx

(Optional)

intchal-tx

(Optional)

intresp-rx

(Optional)

intresp-tx

(Optional)

bundle-rx

(Optional)

bundle-tx

(Optional)

bundle-path-rx

(Optional)

bundle-path-tx

(Optional)

bundle-resv-rx

(Optional)

bundle-resv-tx

(Optional)

bundle-patherr-rx

(Optional)

bundle-patherr-tx

(Optional)

bundle-resverr-rx

(Optional)

bundle-resverr-tx

(Optional)

bundle-pathtear-rx

(Optional)

bundle-pathtear-tx

(Optional)

bundle-resvtear-rx

(Optional)

bundle-resvtear-tx

(Optional)

bundle-ack-rx

(Optional)

bundle-ack-tx

(Optional)

Command Mode

- /exec

show ip rsvp fast-reroute

show ip rsvp fast-reroute [ detail ] [ destination <dest_addr> ] [ source <src_addr> ] [ dst-port <dport-val> ] [ src-port <sport-val> ] [ protect-if <ifname> ] [ __readonly__ [ TABLE_frr <key-frr-dest> <tun-id> <source> <bkp-ifname> <prot-intf> <nnhop> <frr-state> ] [ TABLE_frr_detail <type> <dest> <tun-id> <source> [ <bkp-ifname> <bkpifid> <mergept> <mergept-ero> <nnhop> <frr-state> <prot-intf> <bw-prot> <frr-bw> <bw-prot-level> <desrd-bit> <b-sel-prio> <bkp-src> <tail-addr> <bkp-phy-ifnm> <bkp-phy-ifaddr> <bkp-phy-mtu> ] ] [ <total-path> <active-path> <ready-path> <unassign-path> [ <unprotect-path> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

fast-reroute

Display RSVP fast-reroute information

detail

(Optional) Display detailed RSVP status

destination

(Optional) Display FRR data based on a destination address

dest_addr

(Optional) Destination address

source

(Optional) Display FRR data based on a source address

src_addr

(Optional) Source address

dst-port

(Optional) Display FRR data based on destination port

dport-val

(Optional) Destination Port value

src-port

(Optional) Display FRR data based on a source port

sport-val

(Optional) Source port value

protect-if

(Optional) Display FRR data based on protected interface

ifname

(Optional) Protected interface name

__readonly__

(Optional)

total-path

(Optional)

active-path

(Optional)

ready-path

(Optional)

unassign-path

(Optional)

unprotect-path

(Optional)

TABLE_frr

(Optional)

key-frr-dest

(Optional)

tun-id

(Optional)

source

(Optional)

bkp-ifname

(Optional)

prot-intf

(Optional)

nnhop

(Optional)

frr-state

(Optional)

TABLE_frr_detail

(Optional)

type

(Optional)

dest

(Optional)

tun-id

(Optional)

source

(Optional)

bkp-ifname

(Optional)

bkpifid

(Optional)

mergept

(Optional)

mergept-ero

(Optional)

nnhop

(Optional)

frr-state

(Optional)

prot-intf

(Optional)

bw-prot

(Optional)

frr-bw

(Optional)

bw-prot-level

(Optional)

desrd-bit

(Optional)

b-sel-prio

(Optional)

bkp-src

(Optional)

tail-addr

(Optional)

bkp-phy-ifnm

(Optional)

bkp-phy-ifaddr

(Optional)

bkp-phy-mtu

(Optional)

Command Mode

- /exec

show ip rsvp hello client lsp

show ip rsvp hello client lsp [ detail ] [ __readonly__ [ TABLE_hc_lsp_sum <src-addr> <dst-addr> <tun-id> <lsp-id> <subgrp-orig> <subgrp-id> <lsp-flags> [ <gr-up-nbr> <gr-down-nbr> <rr-up-nbr> <rr-down-nbr> <incompl-nbr-type> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

hello

Display RSVP Hello Information

client

Display Hello client instances

lsp

Display LSP information

detail

(Optional) Display detailed RSVP status

__readonly__

(Optional)

TABLE_hc_lsp_sum

(Optional)

src-addr

(Optional)

dst-addr

(Optional)

tun-id

(Optional)

lsp-id

(Optional)

subgrp-orig

(Optional)

subgrp-id

(Optional)

lsp-flags

(Optional)

gr-up-nbr

(Optional)

gr-down-nbr

(Optional)

rr-up-nbr

(Optional)

rr-down-nbr

(Optional)

incompl-nbr-type

(Optional)

Command Mode

- /exec

show ip rsvp hello client neighbor

show ip rsvp hello client neighbor [ detail ] [ __readonly__ [ TABLE_clnt_nbr_sum <nbr-addr> <nbr-type> <nbr-state> <hi-state> <lsp-count> ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

hello

Display RSVP Hello Information

client

Display Hello client instances

neighbor

Display information for Hello neighbor

detail

(Optional) Display detailed RSVP status

__readonly__

(Optional)

TABLE_clnt_nbr_sum

(Optional)

nbr-addr

(Optional)

nbr-type

(Optional)

nbr-state

(Optional)

hi-state

(Optional)

lsp-count

(Optional)

Command Mode

- /exec

show ip rsvp hello graceful-restart

show ip rsvp hello graceful-restart [ __readonly__ [ TABLE_gr <gr-state> <gr-mode> <refesh-interval> <refresh-misses> <dscp> <restart-time> <recover-time> <max-recover-wait> ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

hello

Display RSVP Hello Information

graceful-restart

Display RSVP graceful-restart intformation

__readonly__

(Optional)

TABLE_gr

(Optional)

gr-state

(Optional)

gr-mode

(Optional)

refesh-interval

(Optional)

refresh-misses

(Optional)

dscp

(Optional)

restart-time

(Optional)

recover-time

(Optional)

max-recover-wait

(Optional)

Command Mode

- /exec

show ip rsvp hello instance

show ip rsvp hello instance [ interface <ifname> ] [ neighbor <nbr-addr> ] [ detail ] [ __readonly__ [ TABLE_hello_inst <key-inst-client-type> <nbr-ip> <if-name> <nbr-state> <lost-comm-count> <lsp-count> <hello-interval> ] [ TABLE_hello_detail <key-det-nbr-ip> <src-ip> <hi-type> <if-name> <nbr-state> <client-type> <lsp-count> <missed-acks-conf> <ref-interval> <src-inst> <nbr-inst> [ <rest-time> <rec-time> ] <lost-comm-count> <missed_ack_cnt> <bad-src-inst-cnt> <bad-dst-inst-cnt> <nbr-disabled-hi-cnt> <msg-rcvd> <msg-sent> <msg-supp> ] [ TABLE_hello_passive_inst <key-psv-nbr-ip> <if-name> ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

hello

Display RSVP Hello Information

instance

Display information for Hello instances

interface

(Optional) Display RSVP interface information

ifname

(Optional) Display RSVP interface information

neighbor

(Optional) Display information for Hello neighbor

nbr-addr

(Optional) RSVP Neighbor address

detail

(Optional) Display detailed RSVP status

__readonly__

(Optional)

TABLE_hello_inst

(Optional)

key-inst-client-type

(Optional)

nbr-ip

(Optional)

if-name

(Optional)

nbr-state

(Optional)

lost-comm-count

(Optional)

lsp-count

(Optional)

hello-interval

(Optional)

TABLE_hello_detail

(Optional)

key-det-nbr-ip

(Optional)

src-ip

(Optional)

hi-type

(Optional)

if-name

(Optional)

nbr-state

(Optional)

client-type

(Optional)

lsp-count

(Optional)

missed-acks-conf

(Optional)

ref-interval

(Optional)

src-inst

(Optional)

nbr-inst

(Optional)

rest-time

(Optional)

rec-time

(Optional)

missed_ack_cnt

(Optional)

bad-src-inst-cnt

(Optional)

bad-dst-inst-cnt

(Optional)

lost-comm-count

(Optional)

nbr-disabled-hi-cnt

(Optional)

msg-rcvd

(Optional)

msg-sent

(Optional)

msg-supp

(Optional)

TABLE_hello_passive_inst

(Optional)

key-psv-nbr-ip

(Optional)

if-name

(Optional)

Command Mode

- /exec

show ip rsvp interface

show ip rsvp interface [ <ifname> ] [ detail | backup-tunnel ] [ __readonly__ [ TABLE_inter <key-if-name> <ifid> <iod> <mpls-ena> <conf-ena> <state> ] [ TABLE_bkp_inter <key-bkp-if-name> <ifid> <iod> <mtu> <state> <tail-addr> <phys-if> ] [ TABLE_detail <key-det-if-name> <iod> <ifid> <ifaddr> <masklen> <mpls-ena> <conf-ena> <dyn-type> <dyn-keepalive-flg> <state> <if-flags> <mtu> <dyn-tmr> [ <dyn-expiry> ] <sig-dscp> <hello-dscp> <tcsb-count> <ip-nbr-cnt> <in-list-cnt> <rr-enabled> <max-sr-size-conf> <max-sr-size> <refresh-timer> <sum-refresh-timer> <time-refresh-intval> <expiry-timer> <expiry-intval> <miss-limit> <bundle-ena> <max-bundle-sz> <rel-ena> <ack-tmr> <ack-init-rexmit> <ack-intval> <ack-max-conf-size> <ack-max-size> <sr-rel> <pacing-ena> <pace-tmr> <pace_intval> <pace-cap-rate> <pace-msg-count> <pace-msg-defer-count> <auth-ena> [ <key-src> <digest> <seq-winsize> <challenge> ] <hst-ena> <hst-intval> <missed_acks> ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

interface

Display RSVP interface information

ifname

(Optional) Display RSVP interface information

backup-tunnel

(Optional) Display backup tunnel information

detail

(Optional) Display detailed RSVP status

__readonly__

(Optional)

TABLE_inter

(Optional)

key-if-name

(Optional)

ifid

(Optional)

iod

(Optional)

mpls-ena

(Optional)

conf-ena

(Optional)

state

(Optional)

TABLE_bkp_inter

(Optional)

key-bkp-if-name

(Optional)

iod

(Optional)

ifid

(Optional)

mtu

(Optional)

state

(Optional)

tail-addr

(Optional)

phys-if

(Optional)

TABLE_detail

(Optional)

key-det-if-name

(Optional)

iod

(Optional)

ifid

(Optional)

ifaddr

(Optional)

masklen

(Optional)

mpls-ena

(Optional)

conf-ena

(Optional)

state

(Optional)

if-flags

(Optional)

dyn-type

(Optional)

mtu

(Optional)

dyn-tmr

(Optional)

dyn-expiry

(Optional)

dyn-keepalive-flg

(Optional)

tcsb-count

(Optional)

ip-nbr-cnt

(Optional)

in-list-cnt

(Optional)

rr-enabled

(Optional)

refresh-timer

(Optional)

sum-refresh-timer

(Optional)

time-refresh-intval

(Optional)

max-sr-size

(Optional)

max-sr-size-conf

(Optional)

sr-rel

(Optional)

max-bundle-sz

(Optional)

expiry-timer

(Optional)

expiry-intval

(Optional)

miss-limit

(Optional)

bundle-ena

(Optional)

rel-ena

(Optional)

ack-intval

(Optional)

ack-max-size

(Optional)

ack-max-conf-size

(Optional)

ack-tmr

(Optional)

ack-init-rexmit

(Optional)

sig-dscp

(Optional)

hello-dscp

(Optional)

pacing-ena

(Optional)

pace-tmr

(Optional)

pace_intval

(Optional)

pace-cap-rate

(Optional)

pace-msg-count

(Optional)

pace-msg-defer-count

(Optional)

auth-ena

(Optional)

key-src

(Optional)

digest

(Optional)

seq-winsize

(Optional)

challenge

(Optional)

hst-ena

(Optional)

hst-intval

(Optional)

missed_acks

(Optional)

Command Mode

- /exec

show ip rsvp internal counters

show ip rsvp internal counters [ error | client | mts | pss | database | refresh | reliable | batch-history ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

counters

Display RSVP statistics

error

(Optional) Display signaling error information

client

(Optional) Display client information

mts

(Optional) Display message service information

pss

(Optional) Display persistent store information

database

(Optional) Display database information

refresh

(Optional) Display refresh information

reliable

(Optional) Display reliable message information

batch-history

(Optional) Display batching history

Command Mode

- /exec

show ip rsvp internal database

show ip rsvp internal database

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

database

Display database information

Command Mode

- /exec

show ip rsvp internal event-history authentication

show ip rsvp internal event-history authentication

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

authentication

Display authentication events

Command Mode

- /exec

show ip rsvp internal event-history bundle-message

show ip rsvp internal event-history bundle-message

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

bundle-message

Display bundle-message events

Command Mode

- /exec

show ip rsvp internal event-history cli

show ip rsvp internal event-history cli

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

cli

Display cli events

Command Mode

- /exec

show ip rsvp internal event-history database

show ip rsvp internal event-history database

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

database

Display database events

Command Mode

- /exec

show ip rsvp internal event-history dump-messages

show ip rsvp internal event-history dump-messages

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

dump-messages

Display message events

Command Mode

- /exec

show ip rsvp internal event-history error

show ip rsvp internal event-history error

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

error

Display error events

Command Mode

- /exec

show ip rsvp internal event-history event

show ip rsvp internal event-history event

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

event

Display rsvp events

Command Mode

- /exec

show ip rsvp internal event-history fast-reroute

show ip rsvp internal event-history fast-reroute

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

fast-reroute

Display FRR events

Command Mode

- /exec

show ip rsvp internal event-history hello

show ip rsvp internal event-history hello

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

hello

Display hello events

Command Mode

- /exec

show ip rsvp internal event-history high-availability

show ip rsvp internal event-history high-availability

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

high-availability

Display HA events

Command Mode

- /exec

show ip rsvp internal event-history interface

show ip rsvp internal event-history interface

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

interface

Display interface events

Command Mode

- /exec

show ip rsvp internal event-history neighbor

show ip rsvp internal event-history neighbor

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

neighbor

Display neighbor events

Command Mode

- /exec

show ip rsvp internal event-history packet

show ip rsvp internal event-history packet

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

packet

Display packet events

Command Mode

- /exec

show ip rsvp internal event-history path

show ip rsvp internal event-history path

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

path

Display path events

Command Mode

- /exec

show ip rsvp internal event-history policy

show ip rsvp internal event-history policy

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

policy

Display policy events

Command Mode

- /exec

show ip rsvp internal event-history process

show ip rsvp internal event-history process

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

process

Display process events

Command Mode

- /exec

show ip rsvp internal event-history proxy

show ip rsvp internal event-history proxy

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

proxy

Display proxy events

Command Mode

- /exec

show ip rsvp internal event-history refresh

show ip rsvp internal event-history refresh

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

refresh

Display refresh events

Command Mode

- /exec

show ip rsvp internal event-history reliable

show ip rsvp internal event-history reliable

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

reliable

Display reliable events

Command Mode

- /exec

show ip rsvp internal event-history resv

show ip rsvp internal event-history resv

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

resv

Display resv events

Command Mode

- /exec

show ip rsvp internal event-history route

show ip rsvp internal event-history route

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

route

Display route events

Command Mode

- /exec

show ip rsvp internal event-history server

show ip rsvp internal event-history server

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

server

Display server events

Command Mode

- /exec

show ip rsvp internal event-history session

show ip rsvp internal event-history session

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

session

Display session events

Command Mode

- /exec

show ip rsvp internal event-history signalling

show ip rsvp internal event-history signalling

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

signalling

Display signaling events

Command Mode

- /exec

show ip rsvp internal event-history size

show ip rsvp internal event-history size

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

size

Display history-buffe size

Command Mode

- /exec handle auto 291 cmd_backend_printing cmd

show ip rsvp internal event-history tc

show ip rsvp internal event-history tc

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

event-history

Display event-history buffer content

tc

Display TC events

Command Mode

- /exec

show ip rsvp internal mem-stats

show ip rsvp internal mem-stats

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

mem-stats

Display rsvp memory-statistics

Command Mode

- /exec

show ip rsvp internal message-id database

show ip rsvp internal message-id database [ detail ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

message-id

Display message-id information

database

Display database information

detail

(Optional) Display detailed RSVP status

Command Mode

- /exec

show ip rsvp internal performance

show ip rsvp internal performance

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

performance

Display RSVP performance information

Command Mode

- /exec

show ip rsvp internal pss bundle

show ip rsvp internal pss bundle

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

pss

Display persistent store information

bundle

Display bundle information

Command Mode

- /exec

show ip rsvp internal pss client-batch

show ip rsvp internal pss client-batch

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

pss

Display persistent store information

client-batch

Display client batch information

Command Mode

- /exec

show ip rsvp internal pss config

show ip rsvp internal pss config

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

pss

Display persistent store information

config

Display config info

Command Mode

- /exec

show ip rsvp internal pss globals

show ip rsvp internal pss globals

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

pss

Display persistent store information

globals

Display PSS information for RSVP globals

Command Mode

- /exec

show ip rsvp internal pss hello client neighbor

show ip rsvp internal pss hello client neighbor

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

pss

Display persistent store information

hello

Display RSVP Hello Information

client

Display Hello client instances

neighbor

Display information for Hello neighbor

Command Mode

- /exec

show ip rsvp internal pss hello instance

show ip rsvp internal pss hello instance

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

pss

Display persistent store information

hello

Display RSVP Hello Information

instance

Display information for Hello instances

Command Mode

- /exec

show ip rsvp internal pss isb

show ip rsvp internal pss isb

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

pss

Display persistent store information

isb

Display PSS information for ISB structures

Command Mode

- /exec

show ip rsvp internal pss lxsb

show ip rsvp internal pss lxsb

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

pss

Display persistent store information

lxsb

Display PSS information for LXSB structures

Command Mode

- /exec

show ip rsvp internal pss neighbor

show ip rsvp internal pss neighbor

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

pss

Display persistent store information

neighbor

Display RSVP neighbor intformation

Command Mode

- /exec

show ip rsvp internal pss pfc

show ip rsvp internal pss pfc

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

pss

Display persistent store information

pfc

Display PATH information

Command Mode

- /exec

show ip rsvp internal pss psb

show ip rsvp internal pss psb

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

pss

Display persistent store information

psb

Display PATH information

Command Mode

- /exec

show ip rsvp internal pss reg-clients

show ip rsvp internal pss reg-clients

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

pss

Display persistent store information

reg-clients

Display PSS information for clients registered with RSVP

Command Mode

- /exec

show ip rsvp internal pss request

show ip rsvp internal pss request

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

pss

Display persistent store information

request

Display RSVP reservations

Command Mode

- /exec

show ip rsvp internal pss rsb

show ip rsvp internal pss rsb

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

pss

Display persistent store information

rsb

Display RSVP reservations

Command Mode

- /exec

show ip rsvp internal pss sa

show ip rsvp internal pss sa

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

pss

Display persistent store information

sa

Display Secutiry Association information

Command Mode

- /exec

show ip rsvp internal refresh reduction

show ip rsvp internal refresh reduction [ detail ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

internal

Display RSVP internal information

refresh

Display refresh information

reduction

Display refresh reduction parameters

detail

(Optional) Display detailed RSVP status

Command Mode

- /exec

show ip rsvp neighbor

show ip rsvp neighbor [ <nbr> ] [ detail ] [ private ] [ __readonly__ [ TABLE_nbr <key-nbr-ip> <if-name> <rtr-id> <state> <expires> <last-ref-time> ] [ TABLE_detail <key-det-nbr-ip> <if-name> <local-rid> <rtr-id> <state> <flags> <epoch> <expires> <ref-list-type> [ TABLE_nbr_list <list-id> <ref-list-name> <ref-list-cnt> ] <msgid-cnt> <ooo-msg-cnt> <ackdb-cnt> <rexmit-cnt> <pfc-trigger-cnt> <req-trigger-cnt> <bundle-timer> <bundle-cnt> <last-ref-sref> <last-ref-time> <last-ref-rc> [ <auth-ena> [ <key-src> <digest> <seq-winsize> <challenge> <lifetime> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

neighbor

Display RSVP neighbor intformation

nbr

(Optional) RSVP Neighbor address

detail

(Optional) Display detailed RSVP status

private

(Optional) Display RSVP internal information

__readonly__

(Optional)

TABLE_nbr

(Optional)

key-nbr-ip

(Optional)

if-name

(Optional)

rtr-id

(Optional)

state

(Optional)

expires

(Optional)

last-ref-time

(Optional)

TABLE_detail

(Optional)

key-det-nbr-ip

(Optional)

if-name

(Optional)

local-rid

(Optional)

rtr-id

(Optional)

state

(Optional)

flags

(Optional)

epoch

(Optional)

expires

(Optional)

ref-list-type

(Optional)

msgid-cnt

(Optional)

ooo-msg-cnt

(Optional)

ackdb-cnt

(Optional)

rexmit-cnt

(Optional)

pfc-trigger-cnt

(Optional)

req-trigger-cnt

(Optional)

bundle-timer

(Optional)

bundle-cnt

(Optional)

last-ref-sref

(Optional)

last-ref-time

(Optional)

last-ref-rc

(Optional)

auth-ena

(Optional)

key-src

(Optional)

digest

(Optional)

seq-winsize

(Optional)

challenge

(Optional)

lifetime

(Optional)

TABLE_nbr_list

(Optional)

list-id

(Optional)

ref-list-name

(Optional)

ref-list-cnt

(Optional)

Command Mode

- /exec

show ip rsvp reservation

show ip rsvp reservation [ destination <dest_addr> ] [ sender <src_addr> ] [ dst-port <dport-val> ] [ src-port <sport-val> ] [ private ] [ detail ] [ __readonly__ [ <total-count> ] [ TABLE_resv <dest-ip> <src-ip> <prot> <dport> <src-port> <nhop> <in-if> <style> ] [ TABLE_resv_detail <key-show-ip-rsvp-resv-det> [ TABLE_sess_info [ <unsup-type> ] [ TABLE_v4 <dest> <prot-id> <police> <dest-port> ] [ TABLE_tun_v4 <dest> <tun-id> <ext-dun-id> ] [ TABLE_tun_p2mp_ipv4 <p2mp-id> <tun-id> <ext-tun-id> ] ] [ TABLE_sender_templ [ <unsupported-templ-type> ] [ TABLE_type_v4 <sender> <port> ] [ TABLE_type_lsp_tun_v4 <tun-sender> <lsp-id> ] [ TABLE_type_lsp_tun_p2mp_v4 <tun_sender> <lsp-id> <subgrp-orig> <subgrp-id> ] ] <nhop> <nhop-if> [ <ref-time> <ref-expiry> ] [ <last-ref-sref> <last-ref-time> <last-ref-rc> ] [ <rcvd-msgid> <in-ack-db> ] [ <xmit-msgid> <rr-stage> <ack-out> ] <rsb-flags> <req-flags> [ <label> ] <style> <resv-hndl> [ TABLE_fspec [ <type> <len> [ <ver> <hdr-len> ] ] [ TABLE_uni <sig-type> <cct> <ncc> <nvc> <mult> <trans> ] [ TABLE_intsrv_gtd <svc-id> <svc-len> <parm-id> <parm-flg> <parm-len> <avg-rate> <depth> <peak-rate> <min-unit> <max-unit> <rspec-parm-id> <rspec-parm-flg> <rspec-parm-len> <req-rate> <rspec-slack> ] [ TABLE_intsrv_cload <svc-id> <svc-len> <parm-id> <parm-flg> <parm-len> <avg-rate> <depth> <peak-rate> <min-unit> <max-unit> ] [ TABLE_intsrv_qual <svc-id> <svc-len> ] ] [ TABLE_rro <key-show-rro-start> [ <rro-len> ] [ TABLE_v4 <addr> <rro-flags> [ <local-prot> ] [ <in-use> ] [ <has-bw> ] [ <to-nnhop> ] [ <to-nhop> ] [ <no-prot> ] [ <node-id> ] ] [ TABLE_label <lbl-flags> <label-ctype> <label> ] [ TABLE_unnum <rtr-id> <ifindex> <flags> ] ] [ [ <prot-flags> ] [ <plr-flags> <plr-filter-addr> <plink-nhop-addr> ] [ <mp-label> <mp-filter-addr> ] ] [ <proxy-status> ] <policy-status> [ <policy-src> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

reservation

Display RSVP reservations

destination

(Optional) Display RESV based on a destination address

dest_addr

(Optional) Destination address

sender

(Optional) Display RESV based on a source address

src_addr

(Optional) Source address

dst-port

(Optional) Display RESV based on destination port

dport-val

(Optional) Destination Port value

src-port

(Optional) Display RESV based on a source port

sport-val

(Optional) Source port value

private

(Optional) Display RSVP internal information

detail

(Optional) Display detailed RSVP status

__readonly__

(Optional)

total-count

(Optional)

TABLE_resv

(Optional)

dest-ip

(Optional)

dport

(Optional)

src-ip

(Optional)

src-port

(Optional)

prot

(Optional)

in-if

(Optional)

nhop

(Optional)

style

(Optional)

TABLE_resv_detail

(Optional)

key-show-ip-rsvp-resv-det

(Optional)

resv-hndl

(Optional)

nhop-if

(Optional)

nhop

(Optional)

rr-stage

(Optional)

ref-time

(Optional)

ref-expiry

(Optional)

label

(Optional)

proxy-status

(Optional)

policy-status

(Optional)

last-ref-time

(Optional)

last-ref-rc

(Optional)

last-ref-sref

(Optional)

xmit-msgid

(Optional)

ack-out

(Optional)

rcvd-msgid

(Optional)

style

(Optional)

in-ack-db

(Optional)

rsb-flags

(Optional)

req-flags

(Optional)

TABLE_sess_info

(Optional)

unsup-type

(Optional)

TABLE_v4

(Optional)

dest

(Optional)

prot-id

(Optional)

police

(Optional)

dest-port

(Optional)

TABLE_tun_v4

(Optional)

dest

(Optional)

tun-id

(Optional)

ext-dun-id

(Optional)

TABLE_tun_p2mp_ipv4

(Optional)

p2mp-id

(Optional)

tun-id

(Optional)

ext-tun-id

(Optional)

TABLE_sender_templ

(Optional)

unsupported-templ-type

(Optional)

TABLE_type_v4

(Optional)

sender

(Optional)

port

(Optional)

TABLE_type_lsp_tun_v4

(Optional)

tun-sender

(Optional)

lsp-id

(Optional)

TABLE_type_lsp_tun_p2mp_v4

(Optional)

tun_sender

(Optional)

lsp-id

(Optional)

subgrp-orig

(Optional)

subgrp-id

(Optional)

TABLE_rro

(Optional)

key-show-rro-start

(Optional)

rro-len

(Optional)

TABLE_v4

(Optional)

addr

(Optional)

rro-flags

(Optional)

local-prot

(Optional)

in-use

(Optional)

has-bw

(Optional)

to-nhop

(Optional)

to-nnhop

(Optional)

no-prot

(Optional)

node-id

(Optional)

TABLE_label

(Optional)

lbl-flags

(Optional)

label-ctype

(Optional)

label

(Optional)

TABLE_unnum

(Optional)

rtr-id

(Optional)

ifindex

(Optional)

flags

(Optional)

TABLE_fspec

(Optional)

type

(Optional)

len

(Optional)

ver

(Optional)

hdr-len

(Optional)

TABLE_uni

(Optional)

sig-type

(Optional)

cct

(Optional)

ncc

(Optional)

nvc

(Optional)

mult

(Optional)

trans

(Optional)

TABLE_intsrv_gtd

(Optional)

svc-id

(Optional)

svc-len

(Optional)

parm-id

(Optional)

parm-flg

(Optional)

parm-len

(Optional)

avg-rate

(Optional)

depth

(Optional)

peak-rate

(Optional)

min-unit

(Optional)

max-unit

(Optional)

rspec-parm-id

(Optional)

rspec-parm-flg

(Optional)

rspec-parm-len

(Optional)

req-rate

(Optional)

rspec-slack

(Optional)

TABLE_intsrv_cload

(Optional)

svc-id

(Optional)

svc-len

(Optional)

parm-id

(Optional)

parm-flg

(Optional)

parm-len

(Optional)

avg-rate

(Optional)

depth

(Optional)

peak-rate

(Optional)

min-unit

(Optional)

max-unit

(Optional)

TABLE_intsrv_qual

(Optional)

svc-id

(Optional)

svc-len

(Optional)

prot-flags

(Optional)

plr-flags

(Optional)

plr-filter-addr

(Optional)

plink-nhop-addr

(Optional)

mp-label

(Optional)

mp-filter-addr

(Optional)

policy-src

(Optional)

Command Mode

- /exec

show ip rsvp sender

show ip rsvp sender [ destination <dest_addr> ] [ sender <src_addr> ] [ dst-port <dport-val> ] [ src-port <sport-val> ] [ private ] [ detail ] [ __readonly__ [ <total-count> ] [ TABLE_path <dest-ip> <src-ip> <prot> <dport> <src-port> <phop><in-if> ] [ TABLE_path_detail <start-show-ip-rsvp-path-det> [ TABLE_sess_info [ <unsup-type> ] [ TABLE_v4 <dest> <prot-id> <police> <dest-port> ] [ TABLE_tun_v4 <dest> <tun-id> <ext-dun-id> ] [ TABLE_tun_p2mp_ipv4 <p2mp-id> <tun-id> <ext-tun-id> ] ] [ TABLE_sender_templ [ <unsupported-templ-type> ] [ TABLE_type_v4 <sender> <port> ] [ TABLE_type_lsp_tun_v4 <tun-sender> <lsp-id> ] [ TABLE_type_lsp_tun_p2mp_v4 <tun_sender> <lsp-id> <subgrp-orig> <subgrp-id> ] ] [ <phop> <phop-intf> <ref-time> <exp-time> ] [ <last-ref-sref> <last-ref-time> <last-ref-rc> <nhop> <nhop-intf> ] [ <rcvd-msgid> <in-ack-db> ] [ <xmit-msgid> <rr-stage> <ack-out> ] <psb-flags> <pfc-flags> [ TABLE_path_sess_in <setup-prio> <res-prio> [ <attr-flags> ] [ <prot-desired> ] [ <label-rec> ] [ <se-style> ] [ <ero-exp-req> ] [ <bw-prot-desired> ] [ <node-prot-desired> ] [ <sess-name> ] ] [ TABLE_path_sess_out <setup-prio> <res-prio> [ <attr-flags> ] [ <prot-desired> ] [ <label-rec> ] [ <se-style> ] [ <ero-exp-req> ] [ <bw-prot-desired> ] [ <node-prot-desired> ] [ <sess-name> ] ] [ TABLE_ero <in-out> [ TABLE_ero_type <show-sender-ero-start> [ <unk-obj-type> <unk-obj-len> ] [ TABLE_ero_ipv4 <hop> <loose-strict> <len> <prefix-len> ] [ TABLE_ero_ipv6 <loose-strict> <len> ] [ TABLE_ero_unnum <gen-len> <rtr-id> <intf-id> ] [ TABLE_ero_as <loose-strict> <len> <as-num> ] ] ] [ TABLE_rro <key-show-rro-start> [ <rro-len> ] [ TABLE_v4 <addr> <rro-flags> [ <local-prot> ] [ <in-use> ] [ <has-bw> ] [ <to-nnhop> ] [ <to-nhop> ] [ <no-prot> ] [ <node-id> ] ] [ TABLE_label <lbl-flags> <label-ctype> <label> ] [ TABLE_unnum <rtr-id> <ifindex> <flags> ] ] <class-type> [ TABLE_tspec <type> <obj_len> <version> <total_len> [ TABLE_uni_tspec <len> <sig-type> <cct> <ncc> <nvc> <mult> <trans> ] [ TABLE_intsrv <serv-id> <serv-len> <param-id> <flags> <param-len> <avg-rate> <avg-depth> <peak-rate> <min-unit> <max-unit> ] ] [ <ds-flag> ] [ [ <plr-flag> ] <backup-ifname> [ <plr-template> <orig-ero-mp> ] [ <backup-phys-if> ] ] [ <mp-template> <orig-in-if> ] <path-hndl> <policy-state> [ <policy-src> ] [ <proxy-state> ] [ TABLE_psb_pfc <pfc-output-intf> <pfc-policy-status> <pfc-policy-handle> [ <pfc-policy-query-state> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

sender

Display PATH information

destination

(Optional) Display PATH based on a destination address

dest_addr

(Optional) Destination address

sender

(Optional) Display PATH based on a source address

src_addr

(Optional) Source address

dst-port

(Optional) Display PATH based on destination port

dport-val

(Optional) Destination Port value

src-port

(Optional) Display PATH based on a source port

sport-val

(Optional) Source port value

private

(Optional) Display RSVP internal information

detail

(Optional) Display detailed RSVP status

__readonly__

(Optional)

total-count

(Optional)

TABLE_path

(Optional)

dest-ip

(Optional)

dport

(Optional)

src-ip

(Optional)

src-port

(Optional)

prot

(Optional)

phop

(Optional)

TABLE_path_detail

(Optional)

start-show-ip-rsvp-path-det

(Optional)

phop-intf

(Optional)

ref-time

(Optional)

exp-time

(Optional)

nhop

(Optional)

nhop-intf

(Optional)

class-type

(Optional)

path-hndl

(Optional)

policy-state

(Optional)

policy-src

(Optional)

proxy-state

(Optional)

last-ref-time

(Optional)

last-ref-rc

(Optional)

last-ref-sref

(Optional)

rr-stage

(Optional)

xmit-msgid

(Optional)

ack-out

(Optional)

rcvd-msgid

(Optional)

in-ack-db

(Optional)

psb-flags

(Optional)

pfc-flags

(Optional)

ds-flag

(Optional)

plr-flag

(Optional)

backup-ifname

(Optional)

plr-template

(Optional)

orig-ero-mp

(Optional)

backup-phys-if

(Optional)

mp-template

(Optional)

orig-in-if

(Optional)

TABLE_path_sess_in

(Optional)

setup-prio

(Optional)

res-prio

(Optional)

attr-flags

(Optional)

prot-desired

(Optional)

label-rec

(Optional)

se-style

(Optional)

ero-exp-req

(Optional)

bw-prot-desired

(Optional)

node-prot-desired

(Optional)

sess-name

(Optional)

TABLE_path_sess_out

(Optional)

setup-prio

(Optional)

res-prio

(Optional)

attr-flags

(Optional)

prot-desired

(Optional)

label-rec

(Optional)

se-style

(Optional)

ero-exp-req

(Optional)

bw-prot-desired

(Optional)

node-prot-desired

(Optional)

sess-name

(Optional)

TABLE_sess_info

(Optional)

unsup-type

(Optional)

TABLE_v4

(Optional)

dest

(Optional)

prot-id

(Optional)

police

(Optional)

dest-port

(Optional)

TABLE_tun_v4

(Optional)

dest

(Optional)

tun-id

(Optional)

ext-dun-id

(Optional)

TABLE_tun_p2mp_ipv4

(Optional)

p2mp-id

(Optional)

tun-id

(Optional)

ext-tun-id

(Optional)

TABLE_sender_templ

(Optional)

unsupported-templ-type

(Optional)

TABLE_type_v4

(Optional)

sender

(Optional)

port

(Optional)

TABLE_type_lsp_tun_v4

(Optional)

tun-sender

(Optional)

lsp-id

(Optional)

TABLE_type_lsp_tun_p2mp_v4

(Optional)

tun_sender

(Optional)

lsp-id

(Optional)

subgrp-orig

(Optional)

subgrp-id

(Optional)

TABLE_ero

(Optional)

in-out

(Optional)

TABLE_ero_type

(Optional)

show-sender-ero-start

(Optional)

unk-obj-type

(Optional)

unk-obj-len

(Optional)

TABLE_ero_ipv4

(Optional)

hop

(Optional)

loose-strict

(Optional)

len

(Optional)

prefix-len

(Optional)

TABLE_ero_ipv6

(Optional)

loose-strict

(Optional)

len

(Optional)

TABLE_ero_unnum

(Optional)

gen-len

(Optional)

rtr-id

(Optional)

intf-id

(Optional)

TABLE_ero_as

(Optional)

loose-strict

(Optional)

len

(Optional)

as-num

(Optional)

TABLE_rro

(Optional)

key-show-rro-start

(Optional)

rro-len

(Optional)

TABLE_v4

(Optional)

addr

(Optional)

rro-flags

(Optional)

local-prot

(Optional)

in-use

(Optional)

has-bw

(Optional)

to-nhop

(Optional)

to-nnhop

(Optional)

no-prot

(Optional)

node-id

(Optional)

TABLE_label

(Optional)

lbl-flags

(Optional)

label-ctype

(Optional)

label

(Optional)

TABLE_unnum

(Optional)

rtr-id

(Optional)

ifindex

(Optional)

flags

(Optional)

TABLE_tspec

(Optional)

type

(Optional)

obj_len

(Optional)

version

(Optional)

total_len

(Optional)

TABLE_uni_tspec

(Optional)

sig-type

(Optional)

cct

(Optional)

ncc

(Optional)

nvc

(Optional)

mult

(Optional)

trans

(Optional)

TABLE_intsrv

(Optional)

serv-id

(Optional)

serv-len

(Optional)

param-id

(Optional)

flags

(Optional)

param-len

(Optional)

avg-rate

(Optional)

avg-depth

(Optional)

peak-rate

(Optional)

min-unit

(Optional)

max-unit

(Optional)

TABLE_psb_pfc

(Optional)

pfc-output-intf

(Optional)

pfc-policy-status

(Optional)

pfc-policy-handle

(Optional)

pfc-policy-query-state

(Optional)

Command Mode

- /exec

show ip rsvp session

show ip rsvp session [ destination <dest_addr> ] [ __readonly__ <total-count> TABLE_session <type> <dest-ip> <dport> <tunnel-id> <psb-cnt> <rsb-cnt> <reqs> <pxbs> <rxbs> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

session

Display RSVP Session information

destination

(Optional) Display Sessions based on a destination address

dest_addr

(Optional) Destination address

__readonly__

(Optional)

total-count

(Optional)

TABLE_session

(Optional)

type

(Optional)

dest-ip

(Optional)

dport

(Optional)

tunnel-id

(Optional)

psb-cnt

(Optional)

rsb-cnt

(Optional)

reqs

(Optional)

pxbs

(Optional)

rxbs

(Optional)

Command Mode

- /exec

show ip rsvp signalling rate-limit

show ip rsvp signalling rate-limit [ __readonly__ TABLE_counters <rlim-ena> <limit> <intvl> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

signalling

Display signalling informaion

rate-limit

Display rate limit parameters

__readonly__

(Optional)

TABLE_counters

(Optional)

rlim-ena

(Optional)

limit

(Optional)

intvl

(Optional)

Command Mode

- /exec

show ip rsvp signalling refresh interval

show ip rsvp signalling refresh interval [ __readonly__ TABLE_counters <interval> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

signalling

Display signalling informaion

refresh

Display refresh information

interval

Display interval for refresh messagses

__readonly__

(Optional)

TABLE_counters

(Optional)

interval

(Optional)

Command Mode

- /exec

show ip rsvp signalling refresh misses

show ip rsvp signalling refresh misses [ __readonly__ TABLE_counters <misses> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

signalling

Display signalling informaion

refresh

Display refresh information

misses

Display misses required to trigger state timeout

__readonly__

(Optional)

TABLE_counters

(Optional)

misses

(Optional)

Command Mode

- /exec

show ip rsvp signalling refresh reduction

show ip rsvp signalling refresh reduction [ __readonly__ TABLE_counters <rr-ena> <ackdelay> <ackdelay> <epoch> [ <msgid-inuse> <msgid-alloc> <msgid-free> ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

rsvp

Display RSVP status

signalling

Display signalling informaion

refresh

Display refresh information

reduction

Display refresh reduction parameters

__readonly__

(Optional)

TABLE_counters

(Optional)

rr-ena

(Optional)

ackdelay

(Optional)

epoch

(Optional)

msgid-inuse

(Optional)

msgid-alloc

(Optional)

msgid-free

(Optional)

Command Mode

- /exec

show ip sla application

show ip sla application [ __readonly__ <version> <line-length> <type-name> <feature-name> <lowmemorymark> <max-entries> <probe-cap> <entries-config> <entries-active> <entries-pending> <entries-inactive> <last-change-time> <rttMonApplTimeOfLastSet> <rttMonApplReset> ]

Syntax Description

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

application

IP SLAs Application

__readonly__

(Optional)

version

(Optional)

line-length

(Optional)

type-name

(Optional)

entries-config

(Optional)

entries-active

(Optional)

entries-pending

(Optional)

entries-inactive

(Optional)

last-change-time

(Optional)

rttMonApplTimeOfLastSet

(Optional)

rttMonApplReset

(Optional) Appl Reset

feature-name

(Optional)

lowmemorymark

(Optional)

max-entries

(Optional)

probe-cap

(Optional)

Command Mode

- /exec

show ip sla configuration

show ip sla configuration [ <entry-num> ] [ __readonly__ { TABLE_oper <index> <oper-type> <owner> <tag> <threshold> <timeout> <dest-ip> <source-ip> <dest-port> <source-port> <dns-source-port> <dns-name-server> <traffic-class> <flow-label> <tos> <vrf-name> <source-int> } { TABLE_control <control-enabled> } { TABLE_udpecho <packet-size> <verify-data> <data-pattern> } { TABLE_icmpecho <packet-size> <verify-data> } { TABLE_dns } { TABLE_fabricpath <profile-id> <switch-id> <interface> } { TABLE_udpjitter <packet-size> <packet-interval> <num-packets> <codec-type> <codec-num-packets> <codec-packet-size> <codec-packet-interval> <codec-adv-factor> <verify-data> <packet-priority> <ntp-sync-tolerance> <ntp-sync-toltype> } { TABLE_http <http-oper> <http-version> <url> <proxy> <raw-strings> <cache-control> } { TABLE_schedule <frequency> <secondary-freq-timeout> <secondary-freq-loss> <next-start-time> <group-scheduled> <randomly-scheduled> <low-frequency> <high-frequency> <life> <ageout> <recurring> <status-of-entry> } { TABLE_diststats <hours> <buckets> <precision> <interval> } { TABLE_enhhistory <einterval> <ebuckets> } { TABLE_history-stats <lives> <hsbuckets> <filter> } ]

Syntax Description

Syntax Description

__readonly__

(Optional)

index

(Optional)

TABLE_oper

(Optional) Show operation information

owner

(Optional)

tag

(Optional)

threshold

(Optional)

timeout

(Optional)

oper-type

(Optional)

dest-ip

(Optional)

source-ip

(Optional)

dest-port

(Optional)

source-port

(Optional)

dns-source-port

(Optional)

traffic-class

(Optional)

flow-label

(Optional)

tos

(Optional)

vrf-name

(Optional)

source-int

(Optional)

dns-name-server

(Optional)

TABLE_control

(Optional) Show control information

control-enabled

(Optional)

TABLE_udpecho

(Optional) Show UDP echo information

data-pattern

(Optional)

TABLE_icmpecho

(Optional) Show ICMP echo information

TABLE_dns

(Optional) Show DNS information

TABLE_fabricpath

(Optional) Show FABRIC PATH echo information

profile-id

(Optional)

switch-id

(Optional)

interface

(Optional)

TABLE_udpjitter

(Optional) Show UDP jitter information

packet-size

(Optional)

packet-interval

(Optional)

num-packets

(Optional)

codec-type

(Optional)

codec-num-packets

(Optional)

codec-packet-size

(Optional)

codec-packet-interval

(Optional)

codec-adv-factor

(Optional)

verify-data

(Optional)

packet-priority

(Optional)

ntp-sync-tolerance

(Optional)

ntp-sync-toltype

(Optional)

TABLE_http

(Optional) Show HTTP information

http-oper

(Optional)

http-version

(Optional)

url

(Optional)

proxy

(Optional)

raw-strings

(Optional)

cache-control

(Optional)

TABLE_schedule

(Optional) Show schedule information

frequency

(Optional)

secondary-freq-timeout

(Optional)

secondary-freq-loss

(Optional)

next-start-time

(Optional)

group-scheduled

(Optional)

randomly-scheduled

(Optional)

low-frequency

(Optional)

high-frequency

(Optional)

life

(Optional)

ageout

(Optional)

recurring

(Optional)

status-of-entry

(Optional)

TABLE_diststats

(Optional) Show distribution of statistics information

hours

(Optional)

buckets

(Optional)

precision

(Optional)

interval

(Optional)

TABLE_enhhistory

(Optional) Show enhanced history information

einterval

(Optional)

ebuckets

(Optional)

TABLE_history-stats

(Optional) Show history statistics information

lives

(Optional)

hsbuckets

(Optional)

filter

(Optional)

show

ip

sla

Service Level Agreement (SLA)

configuration

IP SLAs Configuration

entry-num

(Optional) Entry Number

Command Mode

- /exec

show ip sla enhanced-history collection-statistics

show ip sla enhanced-history collection-statistics [ <operation-number> [ interval <interval-in-secs> ] ] [ __readonly__ <index> { TABLE_generic <outstring> } ]

Syntax Description

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

enhanced-history

IP SLAs Enhanced History

collection-statistics

IP SLAs Collection Statistics

operation-number

(Optional) Entry Number

interval

(Optional) Aggregation Interval

interval-in-secs

(Optional) Interval in seconds

__readonly__

(Optional)

index

(Optional)

TABLE_generic

(Optional) Show History Information

outstring

(Optional)

Command Mode

- /exec

show ip sla enhanced-history distribution-statistics

show ip sla enhanced-history distribution-statistics [ <operation-number> [ interval <interval-in-secs> ] ] [ __readonly__ <index> { TABLE_generic <outstring> } ]

Syntax Description

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

enhanced-history

IP SLAs Enhanced History

distribution-statistics

IP SLAs Distribution Statistics

operation-number

(Optional) Entry Number

interval

(Optional) Aggregation Interval

interval-in-secs

(Optional) Interval in seconds

__readonly__

(Optional)

index

(Optional)

TABLE_generic

(Optional) Show History Information

outstring

(Optional)

Command Mode

- /exec

show ip sla group schedule

show ip sla group schedule [ <group-operation-number> ] [ __readonly__ <entry-number> <probe-list> <num-probes> <sched-period> <mode> <low-freq> <high-freq> <freq> <snmp-status> <next-start-time> <life> <ageout> ]

Syntax Description

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

group

IP SLAs Group Scheduling/Configuration

schedule

Group Scheduling

group-operation-number

(Optional) Group Schedule Entry Number

__readonly__

(Optional)

entry-number

(Optional)

probe-list

(Optional)

num-probes

(Optional)

sched-period

(Optional)

mode

(Optional)

low-freq

(Optional)

high-freq

(Optional)

freq

(Optional)

snmp-status

(Optional)

next-start-time

(Optional)

life

(Optional)

ageout

(Optional)

Command Mode

- /exec

show ip sla history

show ip sla history [ <operation-number> ] [ tabular | full | interval-statistics ] [ __readonly__ <index> { TABLE_generic <outstring> } ]

Syntax Description

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

history

IP SLAs History

operation-number

(Optional) Entry Number

tabular

(Optional) Compact Output

full

(Optional) Listed Output

interval-statistics

(Optional) Interval statistics output

__readonly__

(Optional)

index

(Optional)

TABLE_generic

(Optional) Show History Information

outstring

(Optional)

Command Mode

- /exec

show ip sla reaction-configuration

show ip sla reaction-configuration [ <entry-num> ] [ __readonly__ <entry-number> <index> <reaction> <threshold-type> <rising-value> <falling-value> <threshold-countX> <threshold-countY> <action-type> <unconfigured> ]

Syntax Description

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

reaction-configuration

IP SLAs Reaction Configuration

entry-num

(Optional) Entry Number

__readonly__

(Optional)

entry-number

(Optional)

index

(Optional)

reaction

(Optional)

threshold-type

(Optional)

rising-value

(Optional)

falling-value

(Optional)

threshold-countX

(Optional)

threshold-countY

(Optional)

action-type

(Optional)

unconfigured

(Optional)

Command Mode

- /exec

show ip sla reaction-trigger

show ip sla reaction-trigger [ <entry-num> ] [ __readonly__ <entry-number> <target-entry> <snmp-status> <operational-state> <unconfigured> ]

Syntax Description

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

reaction-trigger

IP SLAs Reaction Trigger

entry-num

(Optional) Entry Number

__readonly__

(Optional)

entry-number

(Optional)

target-entry

(Optional)

snmp-status

(Optional)

operational-state

(Optional)

unconfigured

(Optional)

Command Mode

- /exec

show ip sla responder

show ip sla responder [ __readonly__ <gen-enabled> <rttMonApplResponder> <perm-enabled> <ctrl-msg-count> <errors> { TABLE_recent <print-recent-hdr> <print-recent-err-hdr> <recent-addr> <recent-time> <recent-error> } { TABLE_permanent <print-tcp-hdr> <print-udp-hdr> <address> <port> } ]

Syntax Description

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

responder

IP SLAs Responder Information

__readonly__

(Optional)

gen-enabled

(Optional)

rttMonApplResponder

(Optional) rttMonApplResponder

perm-enabled

(Optional)

ctrl-msg-count

(Optional)

errors

(Optional)

TABLE_recent

(Optional) Show recent control message information

print-recent-hdr

(Optional)

print-recent-err-hdr

(Optional)

recent-addr

(Optional)

recent-time

(Optional)

recent-error

(Optional)

TABLE_permanent

(Optional) Show permanent port/address information

print-tcp-hdr

(Optional)

print-udp-hdr

(Optional)

address

(Optional)

port

(Optional)

Command Mode

- /exec

show ip sla statistics

show ip sla statistics [ aggregated ] [ <entry-num> ] [ details ] [ __readonly__ <index> { TABLE_common <update-count> <latest-RTT> <latest-start-time> <latest-return-code> <micro-accuracy> <nano-accuracy> <http-dns-rtt> <http-tcp-rtt> <http-ttfb> <http-rtt> <http-status> <http-recvlen> <http-bodysize> <http-dns-timeout> <http-tcp-timeout> <http-t-timeout> <http-dns-error> <http-tcp-error> <http-t-error> } { TABLE_schedule <life-left> <oper-state> <reset-time> } { TABLE_jitter <operation-type> <ntp-sync-state> <rtt-count> <rtt-min> <rtt-avg> <rtt-max> <lat-ow-samples> <sd-lat-sum> <sd-lat-sum2> <sd-lat-ow-min> <sd-lat-ow-avg> <sd-lat-ow-max> <ds-lat-sum> <ds-lat-sum2> <ds-lat-ow-min> <ds-lat-ow-avg> <ds-lat-ow-max> <sd-jitter-count> <ds-jitter-count> <sd-jitter-min> <sd-jitter-avg> <sd-jitter-max> <sd-pos-jitter-min> <sd-pos-jitter-avg> <sd-pos-jitter-max> <sd-pos-jitter-num> <sd-pos-jitter-sum> <sd-pos-jitter-sum2> <sd-neg-jitter-min> <sd-neg-jitter-avg> <sd-neg-jitter-max> <sd-neg-jitter-num> <sd-neg-jitter-sum> <sd-neg-jitter-sum2> <ds-jitter-min> <ds-jitter-avg> <ds-jitter-max> <ds-pos-jitter-min> <ds-pos-jitter-avg> <ds-pos-jitter-max> <ds-pos-jitter-num> <ds-pos-jitter-sum> <ds-pos-jitter-sum2> <ds-neg-jitter-min> <ds-neg-jitter-avg> <ds-neg-jitter-max> <ds-neg-jitter-num> <ds-neg-jitter-sum> <ds-neg-jitter-sum2> <pkt-unprocessed> <pkt-loss> <pkt-loss-per> <pkt-loss-min> <pkt-loss-max> <pkt-loss-inter-min> <pkt-loss-inter-max> <pkt-loss-sd> <pkt-loss-sd-per> <pkt-loss-sd-min> <pkt-loss-sd-max> <pkt-loss-sd-inter-min> <pkt-loss-sd-inter-max> <pkt-loss-ds> <pkt-loss-ds-per> <pkt-loss-ds-min> <pkt-loss-ds-max> <pkt-loss-ds-inter-min> <pkt-loss-ds-inter-max> <pkt-oos> <pkt-oos-sd> <pkt-oos-ds> <pkt-oos-both> <pkt-mia> <pkt-late> <pkt-skipped> <voice-icpif> <voice-mos> <inter-jitter-out> <inter-jitter-in> <jitter-avg> } { TABLE_aggdetails <outstring> } <print_type> ]

Syntax Description

Syntax Description

show

ip

sla

Service Level Agreement (SLA)

statistics

IP SLAs Statistics

entry-num

(Optional) Entry Number

details

(Optional) Detailed Output

aggregated

(Optional) IP SLAs Statistics Aggregated

__readonly__

(Optional)

index

(Optional)

TABLE_common

(Optional) Show common statistics information

update-count

(Optional)

latest-RTT

(Optional)

latest-start-time

(Optional)

latest-return-code

(Optional)

micro-accuracy

(Optional)

nano-accuracy

(Optional)

http-dns-rtt

(Optional)

http-tcp-rtt

(Optional)

http-ttfb

(Optional)

http-rtt

(Optional)

http-status

(Optional)

http-recvlen

(Optional)

http-bodysize

(Optional)

http-dns-timeout

(Optional)

http-tcp-timeout

(Optional)

http-t-timeout

(Optional)

http-dns-error

(Optional)

http-tcp-error

(Optional)

http-t-error

(Optional)

TABLE_schedule

(Optional) Show schedule statistics information

life-left

(Optional)

oper-state

(Optional)

reset-time

(Optional)

TABLE_jitter

(Optional) Show jitter statistics information

operation-type

(Optional)

ntp-sync-state

(Optional)

rtt-count

(Optional)

rtt-min

(Optional)

rtt-avg

(Optional)

rtt-max

(Optional)

lat-ow-samples

(Optional)

sd-lat-sum

(Optional)

sd-lat-sum2

(Optional)

sd-lat-ow-min

(Optional)

sd-lat-ow-avg

(Optional)

sd-lat-ow-max

(Optional)

ds-lat-sum

(Optional)

ds-lat-sum2

(Optional)

ds-lat-ow-min

(Optional)

ds-lat-ow-avg

(Optional)

ds-lat-ow-max

(Optional)

sd-jitter-count

(Optional)

ds-jitter-count

(Optional)

sd-jitter-min

(Optional)

sd-jitter-avg

(Optional)

sd-jitter-max

(Optional)

sd-pos-jitter-min

(Optional)

sd-pos-jitter-avg

(Optional)

sd-pos-jitter-max

(Optional)

sd-pos-jitter-num

(Optional)

sd-pos-jitter-sum

(Optional)

sd-pos-jitter-sum2

(Optional)

sd-neg-jitter-min

(Optional)

sd-neg-jitter-avg

(Optional)

sd-neg-jitter-max

(Optional)

sd-neg-jitter-num

(Optional)

sd-neg-jitter-sum

(Optional)

sd-neg-jitter-sum2

(Optional)

ds-jitter-min

(Optional)

ds-jitter-avg

(Optional)

ds-jitter-max

(Optional)

ds-pos-jitter-min

(Optional)

ds-pos-jitter-avg

(Optional)

ds-pos-jitter-max

(Optional)

ds-pos-jitter-num

(Optional)

ds-pos-jitter-sum

(Optional)

ds-pos-jitter-sum2

(Optional)

ds-neg-jitter-min

(Optional)

ds-neg-jitter-avg

(Optional)

ds-neg-jitter-max

(Optional)

ds-neg-jitter-num

(Optional)

ds-neg-jitter-sum

(Optional)

ds-neg-jitter-sum2

(Optional)

pkt-unprocessed

(Optional)

pkt-loss

(Optional)

pkt-loss-per

(Optional)

pkt-loss-min

(Optional)

pkt-loss-max

(Optional)

pkt-loss-inter-min

(Optional)

pkt-loss-inter-max

(Optional)

pkt-loss-sd

(Optional)

pkt-loss-sd-per

(Optional)

pkt-loss-sd-min

(Optional)

pkt-loss-sd-max

(Optional)

pkt-loss-sd-inter-min

(Optional)

pkt-loss-sd-inter-max

(Optional)

pkt-loss-ds

(Optional)

pkt-loss-ds-per

(Optional)

pkt-loss-ds-min

(Optional)

pkt-loss-ds-max

(Optional)

pkt-loss-ds-inter-min

(Optional)

pkt-loss-ds-inter-max

(Optional)

pkt-oos

(Optional)

pkt-oos-sd

(Optional)

pkt-oos-ds

(Optional)

pkt-oos-both

(Optional)

pkt-mia

(Optional)

pkt-late

(Optional)

pkt-skipped

(Optional)

voice-icpif

(Optional)

voice-mos

(Optional)

inter-jitter-out

(Optional)

inter-jitter-in

(Optional)

jitter-avg

(Optional)

TABLE_aggdetails

(Optional) Show aggregated statistics information

outstring

(Optional)

print_type

(Optional)

Command Mode

- /exec

show ip ssh source-interface

show ip ssh source-interface [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ { TABLE_ipsshvrf <vrfname> <ifname> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ssh

Display SSH client information

source-interface

Display source interface information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_ipsshvrf

(Optional) source interface of ssh given vrf

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip ssh source-interface vrf all

show ip ssh source-interface vrf all [ __readonly__ [ { TABLE_ipssh <vrfname> <ifname> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ssh

Display SSH client information

source-interface

Display source interface information

vrf

Display per-VRF information

all

Display entries for all vrfs

__readonly__

(Optional)

TABLE_ipssh

(Optional) source interface of ssh

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip static-route

show ip static-route [ multicast ] [ internal ] [ track-table ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <count> <unres-count> ] [ TABLE_vrf_all { <cntxt_name> <cntxt_id> [ TABLE_each_vrf { <prefix_addr_msk> <nhop_addr_msk> <nhop_vrf_info> <nhop_intr_info> <urib_stat> [ <seg_id> ] [ <tunnel_id> <urib_encap_type> ] <nhop_urib_stat> [ <track_obj_num> <track_obj_state> ] } ] } ] [ TABLE_multicast <multicast> ] [ TABLE_track-table ] [ TABLE_route <prefix> <masklen> <nhop> <nhop-masklen> <intf> <real-nhop> <iod> <pref> <tag> <unres> ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

static-route

Display configured static routes

multicast

(Optional) Display only multicast routes

internal

(Optional) Display internal data structure info

track-table

(Optional) Display track object details associated with static routes

vrf

(Optional) Display per-VRF information

all

(Optional) Display all VRFs

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_vrf_all

(Optional)

cntxt_name

(Optional)

cntxt_id

(Optional)

TABLE_each_vrf

(Optional)

prefix_addr_msk

(Optional)

nhop_addr_msk

(Optional)

nhop_vrf_info

(Optional)

nhop_intr_info

(Optional)

urib_stat

(Optional)

seg_id

(Optional)

tunnel_id

(Optional)

urib_encap_type

(Optional)

nhop_urib_stat

(Optional)

track_obj_num

(Optional)

track_obj_state

(Optional)

TABLE_multicast

(Optional)

multicast

(Optional)

TABLE_track-table

(Optional)

TABLE_route

(Optional)

prefix

(Optional)

masklen

(Optional)

nhop

(Optional)

nhop-masklen

(Optional)

intf

(Optional)

real-nhop

(Optional)

iod

(Optional)

pref

(Optional)

tag

(Optional)

unres

(Optional)

count

(Optional)

unres-count

(Optional)

Command Mode

- /exec

show ip stats

show ip stats

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

stats

Display IP internal stats

Command Mode

- /exec

show ip telnet source-interface

show ip telnet source-interface [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ { TABLE_iptelnetvrf <vrfname> <ifname> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

telnet

Display telnet information

source-interface

Display source interface information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_iptelnetvrf

(Optional) source interface of telnet given vrf

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip telnet source-interface vrf all

show ip telnet source-interface vrf all [ __readonly__ [ { TABLE_iptelnet <vrfname> <ifname> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

telnet

Display telnet information

source-interface

Display source interface information

vrf

Display per-VRF information

all

Display entries for all vrfs

__readonly__

(Optional)

TABLE_iptelnet

(Optional) source interface of telnet

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip tftp source-interface

show ip tftp source-interface [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ { TABLE_iptftpvrf <vrfname> <ifname> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

tftp

Display TFTP client information

source-interface

Display source interface information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_iptftpvrf

(Optional) source interface of tftp given vrf

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip tftp source-interface vrf all

show ip tftp source-interface vrf all [ __readonly__ [ { TABLE_iptftp <vrfname> <ifname> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

tftp

Display TFTP client information

source-interface

Display source interface information

vrf

Display per-VRF information

all

Display entries for all vrfs

__readonly__

(Optional)

TABLE_iptftp

(Optional) source interface of tftp

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip traceroute source-interface

show ip traceroute source-interface [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ [ { TABLE_iptraceroutevrf <vrfname> <ifname> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

traceroute

Display traceroute client information

source-interface

Display source interface information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_iptraceroutevrf

(Optional) source interface of traceroute

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip traceroute source-interface vrf all

show ip traceroute source-interface vrf all [ __readonly__ [ { TABLE_iptraceroute <vrfname> <ifname> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

traceroute

Display traceroute client information

source-interface

Display source interface information

vrf

Display per-VRF information

all

Display entries for all vrfs

__readonly__

(Optional)

TABLE_iptraceroute

(Optional) source interface of traceroute

vrfname

(Optional) vrfname

ifname

(Optional) ifname

Command Mode

- /exec

show ip traffic

show ip traffic [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_ip_traffic <rcvd> <sent> <consumed> <fwd-ucast> <fwd-mcast> <fwd-label> <opts-end> <opts-nop> <opts-bsec> <opts-loosesrc-route> <opts-timestamp> <opts-esec> <opts-record-route> <opts-ump> <opts-stid> <opts-strsrc-route> <opts-alert> <opts-cipso> <opts-other> <bad-csum> <too-small> <bad-ver> <bad-hlen> <bad-len> <bad-dest> <bad-ttl> <cant-fwd> <out-drop> <bad-encap> <no-route> <no-proto> <bad-options> <frag> <fragmented> <out-frag> <frag-drop> <cant-frag> <reasm> <frag-to> <tx-redir> <tx-unreach> <tx-echo-req> <tx-echo-reply> <tx-mask-req> <tx-mask-rep> <tx-info-req> <tx-info-reply> <tx-param-prob> <tx-source-quench> <tx-tstamp-req> <tx-tstamp-reply> <tx-time-exceeded> <tx-router-solicit> <tx-router-advert> <rx-redir> <rx-unreach> <rx-echo-req> <rx-echo-reply> <rx-mask-req> <rx-mask-rep> <rx-info-req> <rx-info-reply> <rx-param-prob> <rx-source-quench> <rx-tstamp-req> <rx-tstamp-reply> <rx-time-exceeded> <rx-router-solicit> <rx-router-advert> <rx-format-errors> <rx-csum-errors> <inrcv> <inoctet> <inhdrerr> <innoroutes> <inaddrerr> <innoproto> <intruncated> <inforw> <reasmoks> <reasmfails> <reasmreqds> <indiscards> <indelivers> <outnoroutes> <outrqsts> <outforw> <outdiscards> <outfragreqds> <outfragoks> <outfragfails> <outfragcreates> <outtxmts> <outoctet> <inmcastpkts> <inmcastoctets> <outmcastpkts> <outmcastoctets> <inbdcastpkts> <outbdcastpkts> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

traffic

Display IP software processed traffic statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_ip_traffic

(Optional)

rcvd

(Optional)

sent

(Optional)

consumed

(Optional)

fwd-ucast

(Optional)

fwd-mcast

(Optional)

fwd-label

(Optional)

opts-end

(Optional)

opts-nop

(Optional)

opts-bsec

(Optional)

opts-loosesrc-route

(Optional)

opts-timestamp

(Optional)

opts-esec

(Optional)

opts-record-route

(Optional)

opts-ump

(Optional)

opts-stid

(Optional)

opts-strsrc-route

(Optional)

opts-alert

(Optional)

opts-cipso

(Optional)

opts-other

(Optional)

bad-csum

(Optional)

too-small

(Optional)

bad-ver

(Optional)

bad-hlen

(Optional)

bad-len

(Optional)

bad-dest

(Optional)

bad-ttl

(Optional)

cant-fwd

(Optional)

out-drop

(Optional)

bad-encap

(Optional)

no-route

(Optional)

no-proto

(Optional)

bad-options

(Optional)

frag

(Optional)

fragmented

(Optional)

out-frag

(Optional)

frag-drop

(Optional)

cant-frag

(Optional)

reasm

(Optional)

frag-to

(Optional)

tx-redir

(Optional)

tx-unreach

(Optional)

tx-echo-req

(Optional)

tx-echo-reply

(Optional)

tx-mask-req

(Optional)

tx-mask-rep

(Optional)

tx-info-req

(Optional)

tx-info-reply

(Optional)

tx-param-prob

(Optional)

tx-source-quench

(Optional)

tx-tstamp-req

(Optional)

tx-tstamp-reply

(Optional)

tx-time-exceeded

(Optional)

tx-router-solicit

(Optional)

tx-router-advert

(Optional)

rx-redir

(Optional)

rx-unreach

(Optional)

rx-echo-req

(Optional)

rx-echo-reply

(Optional)

rx-mask-req

(Optional)

rx-mask-rep

(Optional)

rx-info-req

(Optional)

rx-info-reply

(Optional)

rx-param-prob

(Optional)

rx-source-quench

(Optional)

rx-tstamp-req

(Optional)

rx-tstamp-reply

(Optional)

rx-time-exceeded

(Optional)

rx-router-solicit

(Optional)

rx-router-advert

(Optional)

rx-format-errors

(Optional)

rx-csum-errors

(Optional)

inrcv

(Optional)

inoctet

(Optional)

inhdrerr

(Optional)

innoroutes

(Optional)

inaddrerr

(Optional)

innoproto

(Optional)

intruncated

(Optional)

inforw

(Optional)

reasmoks

(Optional)

reasmfails

(Optional)

reasmreqds

(Optional)

indiscards

(Optional)

indelivers

(Optional)

outnoroutes

(Optional)

outrqsts

(Optional)

outforw

(Optional)

outdiscards

(Optional)

outfragreqds

(Optional)

outfragoks

(Optional)

outfragfails

(Optional)

outfragcreates

(Optional)

outtxmts

(Optional)

outoctet

(Optional)

inmcastpkts

(Optional)

inmcastoctets

(Optional)

outmcastpkts

(Optional)

outmcastoctets

(Optional)

inbdcastpkts

(Optional)

outbdcastpkts

(Optional)

Command Mode

- /exec

show ip txlist list

show ip txlist { list | member }

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

txlist

Display IP txlist information

list

Display IP txlist main linkage

member

Display IP txlist active member linkage

Command Mode

- /exec

show ip verify source

show ip verify source [ interface <intf6> ] [ __readonly__ TABLE_verify_entry <verify_intf> <verify_intf_ipsg_val> <verify_ipsg_enable_intfs> <verify_hdr> <verify_filter_mode> <verify_ip_addr> <verify_mac_addr> <verify_vlan> <verify_ipsg_exclude_vlans> ]

Syntax Description

Syntax Description

show

Show running system information

ip

Show the IP features of the system

verify

Verify IPSG information

source

IPSG source

interface

(Optional) Interface

verify_intf_ipsg_val

(Optional) IP source guard value (enabled or disable)

verify_ipsg_enable_intfs

(Optional) IP source guard enabled interfaces names

intf6

(Optional)

__readonly__

(Optional) Read only

TABLE_verify_entry

(Optional)

verify_filter_mode

(Optional)

verify_intf

(Optional)

verify_hdr

(Optional)

verify_ip_addr

(Optional)

verify_mac_addr

(Optional)

verify_vlan

(Optional)

verify_ipsg_exclude_vlans

(Optional)

Command Mode

- /exec

show ipv6 adjacency

show ipv6 { adjacency | neighbor } [ <interface> [ summary ] | <ipv6-addr> [ detail ] | detail | summary | non-best | [ throttle ] statistics ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ <invalid_pkt_cnt> ] [ <invalid_byte_cnt> ] [ <global_drop_pkt_cnt> ] [ <global_drop_byte_cnt> ] [ <global_punt_pkt_cnt> ] [ <global_punt_byte_cnt> ] [ <global_glean_pkt_cnt> ] [ <global_glean_byte_cnt> ] [ <glean_pkt_cnt> ] [ <glean_byte_cnt> ] [ <normal_pkt_cnt> ] [ <normal_byte_cnt> ] [ <last_updated> ] [ <count-static> ] [ <count-dynamic> ] [ <count-others> ] [ <count-throttle> ] [ <count-total> ] [ TABLE_vrf <vrf-name-out> [ TABLE_afi <afi> <count> [ TABLE_adj <intf-out> <ipv6-addr> [ <phy-intf> ] <time-stamp> <mac> <pref> <owner> [ <pkt-count> ] [ <byte-count> ] [ <is-best> ] [ <is-thrtld> ] ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

adjacency

Display adjacency table

neighbor

Show IPv6 neighbor entry

interface

(Optional) Display specific interface adjacencies only

detail

(Optional) Show detail information of adjacency entries

summary

(Optional) Show adjacency summary

non-best

(Optional) Show both best/non-best entries

throttle

(Optional) Throttle

statistics

(Optional) Show adjacency statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Show adjacency entries for all vrfs

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

invalid_pkt_cnt

(Optional)

invalid_byte_cnt

(Optional)

global_drop_pkt_cnt

(Optional)

global_drop_byte_cnt

(Optional)

global_punt_pkt_cnt

(Optional)

global_punt_byte_cnt

(Optional)

global_glean_pkt_cnt

(Optional)

global_glean_byte_cnt

(Optional)

glean_pkt_cnt

(Optional)

glean_byte_cnt

(Optional)

normal_pkt_cnt

(Optional)

normal_byte_cnt

(Optional)

last_updated

(Optional)

count-static

(Optional)

count-dynamic

(Optional)

count-others

(Optional)

count-throttle

(Optional)

count-total

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

count

(Optional)

TABLE_adj

(Optional)

intf-out

(Optional)

phy-intf

(Optional)

time-stamp

(Optional)

mac

(Optional)

pref

(Optional)

owner

(Optional)

pkt-count

(Optional)

byte-count

(Optional)

is-best

(Optional)

is-thrtld

(Optional)

Command Mode

- /exec

show ipv6 amt tunnel

show ipv6 amt tunnel [ <address6> <port> ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ TABLE_vrf <vrf> <tc6> { TABLE_tunnel <gwa> <gwp> <ut> <ld> <lr> <rc> <exp> { TABLE_route <source> <group> <rexp> } } ]

Syntax Description

Syntax Description

show

Show running system information

amt

AMT show commands

ipv6

Display IPv6 information

tunnel

Display tunnel information

vrf

(Optional) Display information for VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

port

(Optional) UDP port number of gateway

detail

(Optional) Display routes joined by tunnel endpoint

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

tc6

(Optional)

TABLE_tunnel

(Optional)

gwa

(Optional)

gwp

(Optional)

ut

(Optional)

ld

(Optional)

lr

(Optional)

rc

(Optional)

exp

(Optional)

TABLE_route

(Optional)

source

(Optional)

group

(Optional)

rexp

(Optional)

Command Mode

- /exec

show ipv6 bgp

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ <ipv6-prefix> [ longer-prefixes ] ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display BGP information for IPv6 address family

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

longer-prefixes

(Optional) Display route and more specific routes

Command Mode

- /exec

show ipv6 bgp

show ipv6 { bgp | mbgp } { route-map { <rmap-name> | <rmap-name> } | prefix-list { <prfxlist-name> | <test_pol_name> } | filter-list { <fltrlist-name> | <test_pol_name> } | community-list { <commlist-name> | <test_pol_name> } | extcommunity-list { <extcommlist-name> | <test_pol_name> } [ exact-match ] }

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display BGP information for IPv6 address family

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

route-map

Display routes matching the route-map

rmap-name

Route-map name

rmap-name

Known route-map name

prefix-list

Display routes matching the prefix-list

prfxlist-name

Name of prefix-list

filter-list

Display routes matching the filter-list

fltrlist-name

Name of filter-list

community-list

Display routes matching the community-list

commlist-name

Name of community-list

extcommunity-list

Display routes matching the extcommunity-list

extcommlist-name

Name of extcommunity-list

test_pol_name

An existing test-list policy

exact-match

(Optional) Exact match of the communities

Command Mode

- /exec

show ipv6 bgp

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { rib-install | rib-uninstall | rib-pending } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ipv6

Display BGP information for IPv6 address family

rib-install

Routes installed in RIB

rib-uninstall

Routes not installed in RIB

rib-pending

Routes not acknowledged by RIB

Command Mode

- /exec

show ipv6 bgp community

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] community { <regexp-str> | { { <comm-id> | <wellknown-id> } + [ exact-match ] } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

ipv6

Display BGP information for IPv6 address family

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

community

Display routes matching the BGP communities

regexp-str

Regular expression to match the communities

comm-id

BGP community value

wellknown-id

BGP wellknown community

exact-match

(Optional) Exact match of the communities

Command Mode

- /exec

show ipv6 bgp dampening

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] dampening { dampened-paths [ regexp <regexp-str> ] | history-paths [ regexp <regexp-str> ] | parameters | flap-statistics } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

dampening

Display dampening info

parameters

Display dampening parameters

dampened-paths

Display all dampened paths

history-paths

Display all history paths

flap-statistics

Display flap statistics for routes

ipv6

Display BGP information for IPv6 address family

regexp

(Optional) Display routes matching the AS path regular expression

regexp-str

(Optional) Regular expression to match the AS paths

Command Mode

- /exec

show ipv6 bgp extcommunity

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] extcommunity { <regexp-str> | { { 4byteas-generic { transitive <ext-comm-gen-trans> | non-transitive <ext-comm-gen-nontrans> } } + [ exact-match ] } } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display BGP information for IPv6 address family

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

extcommunity

Display routes matching the BGP extcommunities

4byteas-generic

Generic extended community

transitive

Transitive extcommunity

non-transitive

Non-Transitive extcommunity

regexp-str

Regular expression to match the extcommunities

ext-comm-gen-trans

Extcommunity number aa4:nn format

ext-comm-gen-nontrans

Extcommunity number aa4:nn format

exact-match

(Optional) Exact match of the extcommunities

Command Mode

- /exec

show ipv6 bgp flap-statistics

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] flap-statistics [ <ipv6-prefix> ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

flap-statistics

Display route flap statistics

ipv6

Display BGP information for IPv6 address family

Command Mode

- /exec

show ipv6 bgp neighbors

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] neighbors { [ { <neighbor-id> | <ipv6-neighbor-id> } [ routes [ advertised | received | dampened ] | advertised-routes | paths | received-routes | flap-statistics ] ] | <neighbor-prefix-id> | <ipv6-neighbor-prefix-id> } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

neighbors

Display all configured BGP neighbors

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

neighbor-id

(Optional) Display one particular BGP neighbor

neighbor-prefix-id

Display details for a prefix peering

ipv6

Display BGP information for IPv6 address family

routes

(Optional) Display all routes advertised/received to/from peer

advertised

(Optional) Display all routes advertised to this peer

received

(Optional) Display all routes received from this peer

dampened

(Optional) Display all dampened routes received from this peer

advertised-routes

(Optional) Display all the routes advertised to this peer

received-routes

(Optional) Display all the routes received from this peer

flap-statistics

(Optional) Display flap statistics for routes received from this peer

paths

(Optional) Display AS paths learned from this peer

Command Mode

- /exec

show ipv6 bgp nexthop-database

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] nexthop-database [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

nexthop-database

Display nexthop database

ipv6

Display BGP information for IPv6 address family

Command Mode

- /exec

show ipv6 bgp nexthop

show ipv6 { bgp | mbgp } nexthop <ipv6nexthop>

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display BGP information for IPv6 address family

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

nexthop

Display routes matching the nexthop

Command Mode

- /exec

show ipv6 bgp received-paths

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] received-paths [ private ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display BGP information for IPv6 address family

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

received-paths

Display paths stored for soft-reconfig

private

(Optional) private

Command Mode

- /exec

show ipv6 bgp regexp

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] regexp <regexp-str> [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ipv6

Display BGP information for IPv6 address family

regexp

Display routes matching the AS path regular expression

regexp-str

Regular expression to match the AS paths

Command Mode

- /exec

show ipv6 bgp summary

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] summary [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

summary

Display summarized information of BGP state

ipv6

Display BGP information for IPv6 address family

Command Mode

- /exec

show ipv6 cache

show ipv6 cache { { brief | detail } | { interface [ <intf> ] } } [ operational ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

cache

Display ipv6 cache

interface

Display ipv6 related interface information

brief

Display summary of ipv6 interface status and configuration

detail

Display detailed information of ipv6 interface status and configuration

operational

(Optional) Display only interfaces that are administratively enabled

intf

(Optional) Interface name to display

Command Mode

- /exec

show ipv6 client

show ipv6 client [ <client-name> ] [ __readonly__ { TABLE_ipv6_client { <cli-name> <cli-stat> <cli-pid> <cli-ext-pid> [ <protocol> ] <pib-index> <cli-uuid> <rou-vrf> <rou-flg> <ctrl-sap> <data-sap> <ipc-ctrl-mq> <ipc-ctrl-fail> <ipc-data-mq> <ipc-data-fail> [ <if-ext-ind> ] [ <recv-fn> <recv-hex> ] } } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

client

Display clients registered with the IPv6 process

client-name

(Optional) Display information for a single IPv6 client

__readonly__

(Optional)

TABLE_ipv6_client

(Optional)

cli-name

(Optional)

cli-stat

(Optional)

cli-pid

(Optional)

cli-ext-pid

(Optional)

protocol

(Optional)

pib-index

(Optional)

cli-uuid

(Optional)

rou-vrf

(Optional)

rou-flg

(Optional)

ctrl-sap

(Optional)

data-sap

(Optional)

ipc-ctrl-mq

(Optional)

ipc-ctrl-fail

(Optional)

ipc-data-mq

(Optional)

ipc-data-fail

(Optional)

if-ext-ind

(Optional)

recv-fn

(Optional)

recv-hex

(Optional)

Command Mode

- /exec

show ipv6 dhcp relay

show ipv6 dhcp relay [ interface <intf-range> ] [ __readonly__ <relay_service_enable> <relay_vpn_enable> <relay_cisco_option_enable> <gbl_src_intf> <interface-name> <intf_src_intf> <intf_header> <relay_address> <vrf_name> <dst_intf> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Show the IPv6 features of the system

dhcp

Show DHCPv6

relay

DHCPv6 relay address of the interface

interface

(Optional) DHCPv6 relay address of the interface

intf-range

(Optional) interface

__readonly__

(Optional) Read only

relay_service_enable

(Optional)

relay_vpn_enable

(Optional)

relay_cisco_option_enable

(Optional)

gbl_src_intf

(Optional) interface name

interface-name

(Optional) interface name

intf_src_intf

(Optional) interface name

intf_header

(Optional)

vrf_name

(Optional) VRF name

dst_intf

(Optional) interface name

Command Mode

- /exec

show ipv6 dhcp relay statistics

show ipv6 dhcp relay statistics [ interface <intf> [ [ server-ip <ip-addr-val> [ use-vrf <vrf-name> ] [ interface <dest-interface> ] ] | [ server-ip <ip-addr-val> [ interface <dest-interface> ] [ use-vrf <vrf-name> ] ] ] ] [ __readonly__ <msg_stats_hdr> <msg_type_str> <tx_pkts> <rx_pkts> <drops> <msg_type_str_total> <server_stats_hdr> <server_helper_addr> <server_vrf> <server_intf> <server_requests> <server_responses> <drop_hdr> <drop_relay_disable> <drop_max_hops> <drop_validation_fails> <drop_unknown_op_intf> <drop_bad_context> <drop_opt_insert_fail> <drop_server_direct_reply> <drop_no_ipv6_addr> <drop_intf_error> <drop_vpn_disabled> <drop_ipv6_extn_hdrs_presence> <drop_mct_drop> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Show the IPv6 features of the system

dhcp

Show information about DHCPv6

relay

DHCPv6 Relay

statistics

Statistics related to DHCPv6

interface

(Optional) input interface

intf

(Optional) interface

server-ip

(Optional) Server address

use-vrf

(Optional) server address VRF membership

vrf-name

(Optional) VRF name

interface

(Optional) Destination interface for the server address

dest-interface

(Optional) Destination interface

__readonly__

(Optional) Read only

msg_stats_hdr

(Optional)

msg_type_str

(Optional)

tx_pkts

(Optional)

rx_pkts

(Optional)

drops

(Optional)

msg_type_str_total

(Optional)

server_stats_hdr

(Optional)

server_helper_addr

(Optional)

server_vrf

(Optional)

server_intf

(Optional) interface name

server_requests

(Optional)

server_responses

(Optional)

drop_hdr

(Optional)

drop_relay_disable

(Optional)

drop_max_hops

(Optional)

drop_validation_fails

(Optional)

drop_unknown_op_intf

(Optional)

drop_bad_context

(Optional)

drop_opt_insert_fail

(Optional)

drop_server_direct_reply

(Optional)

drop_no_ipv6_addr

(Optional)

drop_intf_error

(Optional)

drop_vpn_disabled

(Optional)

drop_ipv6_extn_hdrs_presence

(Optional)

drop_mct_drop

(Optional)

Command Mode

- /exec

show ipv6 eigrp

show { { ipv6 eigrp [ <eigrp-ptag> ] { topology | route } [ <ipv6-prefix> | active | summary | pending | zero-successors | detail-links | all-links ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } | { ip eigrp [ <eigrp-ptag> ] { topology | route } [ { <address> <mask> } | <prefix> | active | summary | pending | zero-successors | detail-links | all-links ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } } [ __readonly__ TABLE_asn <asn> <router_id> TABLE_vrf <vrf> [ <head_serial> <next_serial> <route_count> <replies_pending> <dummies> <eigrp_name> <num_if> <num_neighbors> <num_active_if> [ { TABLE_quiescent_if <ifname> } ] ] [ { TABLE_ent { <ip_prefix> | <ipv6_prefix> } <active> <num_successors> <feasible_distance> <tag> <send_flag> [ <xmit_serno> <xmit_refcount> <xmit_anchored> ] <outstd_replies> <query_origin> <retry_count> <act_min_time> <act_max_time> <act_avg_time> <act_count> [ <peers_sia_stuck> ] [ { TABLE_succ { <s_nexthop> | <s_v6nexthop> } { <s_origin> | <s_v6origin> } [ <s_metric> ] [ <s_bandwidth> <s_delay> <s_reliability> <s_load> <s_min_mtu> <s_hop_count> <s_int_tag> ] [ <s_succ_metric> ] <s_reply_status> <s_sia_status> [ <s_external> ] [ <s_ext_routerid> <s_ext_asn> <s_ext_proto> <s_ext_metric> <s_ext_admin_tag> ] [ <s_exterior_flag> ] <s_send_flag> [ <s_send_flag_hex> ] <s_ifname> <s_xmit_serno> <s_xmit_anchored> } [ { TABLE_reply_status { <rs_ipaddr> | <rs_ipv6addr> } <rs_ifname> } ] [ { TABLE_sia_status { <ss_ipaddr> | <ss_ipv6addr> } <ss_ifname> } ] ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

topology

IP-EIGRP Topology Table

route

IP-EIGRP internal routes

address

(Optional) Network to display information about

mask

(Optional) Network mask

prefix

(Optional) IP prefix <network>/<length>, e.g., 192.168.0.0/16

active

(Optional) Show only active entries

summary

(Optional) Show a summary of the topology table

pending

(Optional) Show only entries pending transmission

zero-successors

(Optional) Show only zero successor entries

detail-links

(Optional) Show all links in topology table with details

all-links

(Optional) Show all links in topology table

__readonly__

(Optional)

TABLE_asn

(Optional) AS number table

asn

(Optional) AS number

router_id

(Optional) Router-ID

TABLE_vrf

(Optional) VRF table

vrf

(Optional) VRF name

head_serial

(Optional) Head of transmit DNDB thread

next_serial

(Optional) Next serial number to use

route_count

(Optional) Number of Routes in the topology table

replies_pending

(Optional) Number of replies pending

dummies

(Optional) Dummies

eigrp_name

(Optional) EIGRP ddb name

num_if

(Optional) Number of interfaces in this AS

num_neighbors

(Optional) Number of EIGRP neighbors in this AS

num_active_if

(Optional) Number of active interfaces

TABLE_quiescent_if

(Optional) Quiescent Interfaces table

ifname

(Optional) Interface name

TABLE_ent

(Optional) Table entry

ip_prefix

(Optional) IP prefix

ipv6_prefix

(Optional) IPv6 prefix

active

(Optional) Route Active?

num_successors

(Optional) Number of successors for the dndb

feasible_distance

(Optional) Feasible Distance

tag

(Optional) Administrator tag value

send_flag

(Optional) Send Flag

xmit_serno

(Optional) Xmit serial number

xmit_refcount

(Optional) xmit ref count (Number of active senders)

xmit_anchored

(Optional) Xmit anchored?

outstd_replies

(Optional) Number of Outstanding replies

query_origin

(Optional) Query origin

retry_count

(Optional) Number of retries done on the active DNDB

act_min_time

(Optional) Shortest time the destination was active

act_max_time

(Optional) Longest time the destination was active

act_avg_time

(Optional) Average time the destination was active

act_count

(Optional) Active count

peers_sia_stuck

(Optional) Number of peers stuck in SIA

TABLE_succ

(Optional) Successor table

s_nexthop

(Optional) Next hop IPv4 address

s_v6nexthop

(Optional) IPv6 next hop address

s_origin

(Optional) Origin(IPv4) of this DRDB

s_v6origin

(Optional) Origin(IPv6) of this DRDB

s_metric

(Optional) Composite metric value for the route

s_succ_metric

(Optional) Composite metric (successor's view) for the route

s_bandwidth

(Optional) Minimum bandwidth of the path

s_delay

(Optional) Total delay of the path

s_reliability

(Optional) Reliability

s_load

(Optional) Load

s_min_mtu

(Optional) Minimum mtu of the path

s_hop_count

(Optional) Number of hops to reach the destination network

s_int_tag

(Optional) Internal tag

s_reply_status

(Optional) Reply status flag

s_sia_status

(Optional) SIA status flag

s_external

(Optional) Route is external?

s_ext_routerid

(Optional) Originating Router-ID

s_ext_asn

(Optional) AS number where the route info originated

s_ext_proto

(Optional) Protocol which originated this route

s_ext_metric

(Optional) External protocol metric

s_ext_admin_tag

(Optional) External admin flag

s_exterior_flag

(Optional) Exterior flag

s_send_flag

(Optional) DRDB send flag

s_send_flag_hex

(Optional) DRDB Send flag in hex

s_ifname

(Optional) Interface this route info came in on

s_xmit_serno

(Optional) Xmit Serial number of this entry

s_xmit_anchored

(Optional) Xmit anchored flag

TABLE_reply_status

(Optional) Reply-status table

rs_ipaddr

(Optional) IP addr of peer from which replies are pending

rs_ifname

(Optional) Interface on which replies are pending

TABLE_sia_status

(Optional) SIA-status table

ss_ipaddr

(Optional) IP addr of peer from which SIA replies are pending

ss_ifname

(Optional) Interface on which SIA replies are pending

eigrp-ptag

(Optional)

Command Mode

- /exec

show ipv6 eigrp route-map statistics

show ipv6 eigrp [ <eigrp-ptag> ] route-map statistics { { redistribute { bgp <as> | { eigrp | isis | ospfv3 | rip } <tag> | static | direct | amt } } | table-map } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_asn <asn> TABLE_vrf <vrf> { TABLE_rmap <name> <action> <seq_num> [ { TABLE_cmd <command> <compare_count> <match_count> } ] } <total_accept_count> <total_reject_count> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

eigrp

Display EIGRP status and configuration

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

eigrp-ptag

(Optional) Process tag

route-map

Route-map related information

statistics

Route-map statistics

redistribute

Redistribute information from another routing protocol

table-map

Tablemap information

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

isis

IS-IS Routing for IPv4

ospfv3

Open Shortest Path First (OSPF) V3

rip

Routing Information Protocol (RIP)

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

tag

Process tag

static

Static routes

direct

Directly connected

amt

AMT Anycast prefix

__readonly__

(Optional)

TABLE_asn

(Optional) AS number table

asn

(Optional) AS number

TABLE_vrf

(Optional) VRF table

vrf

(Optional) VRF name

TABLE_rmap

(Optional) Route-map table

name

(Optional) Route-map name

action

(Optional) Route-map action

seq_num

(Optional) Sequence number of the clause

TABLE_cmd

(Optional) Route-map command table

command

(Optional) Route-map command

compare_count

(Optional) Number of comparisons

match_count

(Optional) Number of matches

total_accept_count

(Optional) Total number of packets accepted by this policy

total_reject_count

(Optional) Total number of packets rejected by this policy

Command Mode

- /exec

show ipv6 fragments

show ipv6 fragments [ <source-addr> ] [ __readonly__ [ TABLE_ipv6_frag [ TABLE_ipv6_each_q { <ipv6-src> <ipv6-dest> <frag-id> <frag-off> <m-flag> <nxt-header> <pay-load> <expires> } ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

fragments

Display queued fragments

__readonly__

(Optional)

TABLE_ipv6_frag

(Optional)

TABLE_ipv6_each_q

(Optional)

frag-id

(Optional)

frag-off

(Optional)

m-flag

(Optional)

nxt-header

(Optional)

pay-load

(Optional)

expires

(Optional)

Command Mode

- /exec

show ipv6 icmp

show ipv6 icmp { adjacency | neighbor | sync-entries } [ <interface> ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { <icmpv6-vrftype> <icmpv6-cxt-name> } [ TABLE_icmpv6_all_int { TABLE_icmpv6_one_int { <icmpv6-ipv6-addr> <time-stamp-icmpv6> <icmpv6-mac> <icmpv6-state> <icmpv6-short-name> [ <phy-int-short-name> ] } } ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

adjacency

Show IPv6 dynamic learnt adjacency entry

neighbor

Show IPv6 dynamic learnt neighbor entry

sync-entries

Show IPv6 table learnt only due to table sync

interface

(Optional) Interface name to display

detail

(Optional) Display detailed information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

icmpv6-vrftype

(Optional)

icmpv6-cxt-name

(Optional)

TABLE_icmpv6_all_int

(Optional)

TABLE_icmpv6_one_int

(Optional)

time-stamp-icmpv6

(Optional)

icmpv6-mac

(Optional)

icmpv6-state

(Optional)

icmpv6-short-name

(Optional)

phy-int-short-name

(Optional)

Command Mode

- /exec

show ipv6 icmp global traffic

show ipv6 { icmp | nd } global traffic [ __readonly__ { TABLE_icmpv6_global_stat <st-total> <rv-total> <st-err> <rv-err> <st-int-drp-cnt> <rv-int-drp-cnt> <st-adj-nt-recov-am-ha> <rv-adj-nt-recov-am-ha> <st-pkt-allow-inv-ttl-vpc> <rv-pkt-allow-inv-ttl-vpc> <st-drp-src-mac-own> <rv-drp-src-mac-own> <st-drp-tgt-ip-not-own> <rv-drp-tgt-ip-not-own> <st-drp-src-ip-not-own> <rv-drp-src-ip-not-own> <st-dest-unreach> <rv-dest-unreach> <st-admin-prohib> <rv-admin-prohib> <st-time-exceed> <rv-time-exceed> <st-para-pbms> <rv-para-pbms> <st-echo-req> <rv-echo-req> <st-echo-reply> <rv-echo-reply> <st-redirect> <rv-redirect> <st-pkt-too-big> <rv-pkt-too-big> <st-rtr-adver> <rv-rtr-adver> <st-rtr-solicit> <rv-rtr-solicit> <st-nei-adver> <rv-nei-adver> <st-nei-solicit> <rv-nei-solicit> <fast-path-pkts> <fastpath-disable> <other-path> <dup-rtr-ra-recvd> <rv-dup-rtr-ra-recvd> } { TABLE_icmpv6_mld_stat <st-v1-queries> <rv-v1-queries> <st-v2-queries> <rv-v2-queries> <st-v1-reports> <rv-v1-reports> <st-v2-reports> <rv-v2-reports> <st-v1-leaves> <rv-v1-leaves> } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

nd

Display Neighbor Discovery interface information

global

Show ICMPv6/ND global variables

traffic

Display ICMPv6 software processed traffic statistics

__readonly__

(Optional)

TABLE_icmpv6_global_stat

(Optional)

st-total

(Optional)

rv-total

(Optional)

st-err

(Optional)

rv-err

(Optional)

st-int-drp-cnt

(Optional)

rv-int-drp-cnt

(Optional)

st-adj-nt-recov-am-ha

(Optional)

rv-adj-nt-recov-am-ha

(Optional)

st-pkt-allow-inv-ttl-vpc

(Optional)

rv-pkt-allow-inv-ttl-vpc

(Optional)

st-drp-src-mac-own

(Optional)

rv-drp-src-mac-own

(Optional)

st-drp-tgt-ip-not-own

(Optional)

rv-drp-tgt-ip-not-own

(Optional)

st-drp-src-ip-not-own

(Optional)

rv-drp-src-ip-not-own

(Optional)

st-dest-unreach

(Optional)

rv-dest-unreach

(Optional)

st-admin-prohib

(Optional)

rv-admin-prohib

(Optional)

st-time-exceed

(Optional)

rv-time-exceed

(Optional)

st-para-pbms

(Optional)

rv-para-pbms

(Optional)

st-echo-req

(Optional)

rv-echo-req

(Optional)

st-echo-reply

(Optional)

rv-echo-reply

(Optional)

st-redirect

(Optional)

rv-redirect

(Optional)

st-pkt-too-big

(Optional)

rv-pkt-too-big

(Optional)

st-rtr-adver

(Optional)

rv-rtr-adver

(Optional)

st-rtr-solicit

(Optional)

rv-rtr-solicit

(Optional)

st-nei-adver

(Optional)

rv-nei-adver

(Optional)

st-nei-solicit

(Optional)

rv-nei-solicit

(Optional)

fast-path-pkts

(Optional)

fastpath-disable

(Optional)

other-path

(Optional)

dup-rtr-ra-recvd

(Optional)

rv-dup-rtr-ra-recvd

(Optional)

TABLE_icmpv6_mld_stat

(Optional)

st-v1-queries

(Optional)

rv-v1-queries

(Optional)

st-v2-queries

(Optional)

rv-v2-queries

(Optional)

st-v1-reports

(Optional)

rv-v1-reports

(Optional)

st-v2-reports

(Optional)

rv-v2-reports

(Optional)

st-v1-leaves

(Optional)

rv-v1-leaves

(Optional)

Command Mode

- /exec

show ipv6 icmp interface

{ show ipv6 { icmp | nd } interface [ <interface> ] { [ prefix [ full ] ] | [ route ] | [ detail ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ] } | { show ipv6 [ icmp ] mld interface [ brief ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } | { show ipv6 [ icmp ] mld interface <interface> } [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_intf <intf-name> <proto-state> <link-state> <admin-state> <addr> <subnet> <link-local-addr> <icmpv6-disabled> <last-ns-sent> <last-na-sent> <last-ra-sent> <next-na-sent> <ra-min-interval> <ra-interval> <set-m-flag> <set-o-flag> <current-hop-limit> <mtu> <router-lifetime> <reachable-time> <retrans-timer> <ns-interval> <send-redirect> <send-unreachables> <mld-disabled> <mld-querier> <mld-entry-count> <mld-config-version> <mld-querier-version> <mld-host-version> <mld-query-timer> <mld-querier-expiry> <mld-qi> <mld-config-qi> <mld-query-mrt> <mld-config-query-mrt> <mld-startup-qi> <mld-config-startup-qi> <mld-startup-qc> <mld-config-last-member-mrt> <mld-last-member-qc> <mld-group-timeout> <mld-config-group-timeout> <mld-querier-timeout> <mld-config-querier-timeout> <mld-config-unsol-rpt-interval> <mld-qrv> <mld-config-robustness-variable> <mld-config-rpt-link-local> <mld-refcount> <static-group-map> <join-group-map> <ra-sent> <ra-rec> <rs-sent> <rs-rec> <na-sent> <na-rec> <ns-sent> <ns-rec> <redirect-sent> <redirect-rec> <msg-sent> <msg-rec> <errors-sent> <erros-rec> <ifdown-sent> <ifdown-rec> <am-ha-not-ready> <allow-mct-ttl> <our-own-mac> <tgt-not-us> <dest-unreachs-sent> <dest-unreachs-rec> <admin-prohibs-sent> <admin-prohibs-rec> <time-excds-sent> <time-excds-rec> <parm-problems-sent> <parm-problems-rec> <echos-sent> <echos-rec> <echo-replies-sent> <echo-replies-rec> <pkt-toobigs-sent> <pkt-toobigs-rec> <fastpath-pkt-recv> <fastpath-disable-pkt-recv> <fastpath-ignore-pkt-recv> <v1-queries-sent> <v1-queries-rec> <v2-queries-sent> <v2-queries-rec> <v1-reports-sent> <v1-reports-rec> <v2-reports-sent> <v2-reports-rec> <v1-leaves-sent> <v1-leaves-rec> <v2-leaves-sent> <v2-leaves-rec> <uptime> <mld-config-il> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

nd

Display Neighbor Discovery interface information

mld

Display Multicast Listener Discovery information

interface

Display ICMPv6 related interface information

prefix

(Optional) Display List of ICMPv6 RA prefix

route

(Optional) Display List of ICMPv6 RA routes

full

(Optional) Display Complete prefix information

detail

(Optional) Display ICMPv6 related interface information in detail

brief

(Optional) Display ICMPv6 related interface information in brief

interface

(Optional) Interface name to show

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_intf

(Optional)

intf-name

(Optional)

proto-state

(Optional)

link-state

(Optional)

admin-state

(Optional)

icmpv6-disabled

(Optional)

last-ns-sent

(Optional)

last-na-sent

(Optional)

last-ra-sent

(Optional)

next-na-sent

(Optional)

ra-min-interval

(Optional)

ra-interval

(Optional)

set-m-flag

(Optional)

set-o-flag

(Optional)

current-hop-limit

(Optional)

mtu

(Optional)

router-lifetime

(Optional)

reachable-time

(Optional)

retrans-timer

(Optional)

ns-interval

(Optional)

send-redirect

(Optional)

send-unreachables

(Optional)

mld-disabled

(Optional)

mld-entry-count

(Optional)

mld-config-version

(Optional)

mld-querier-version

(Optional)

mld-host-version

(Optional)

mld-query-timer

(Optional)

mld-querier-expiry

(Optional)

mld-qi

(Optional)

mld-config-qi

(Optional)

mld-query-mrt

(Optional)

mld-config-query-mrt

(Optional)

mld-startup-qi

(Optional)

mld-config-startup-qi

(Optional)

mld-startup-qc

(Optional)

mld-config-last-member-mrt

(Optional)

mld-last-member-qc

(Optional)

mld-group-timeout

(Optional)

mld-config-group-timeout

(Optional)

mld-querier-timeout

(Optional)

mld-config-querier-timeout

(Optional)

mld-config-unsol-rpt-interval

(Optional)

mld-qrv

(Optional)

mld-config-robustness-variable

(Optional)

mld-config-rpt-link-local

(Optional)

mld-refcount

(Optional)

static-group-map

(Optional)

join-group-map

(Optional)

ra-sent

(Optional)

ra-rec

(Optional)

rs-sent

(Optional)

rs-rec

(Optional)

na-sent

(Optional)

na-rec

(Optional)

ns-sent

(Optional)

ns-rec

(Optional)

redirect-sent

(Optional)

redirect-rec

(Optional)

msg-sent

(Optional)

msg-rec

(Optional)

errors-sent

(Optional)

erros-rec

(Optional)

ifdown-sent

(Optional)

ifdown-rec

(Optional)

am-ha-not-ready

(Optional)

allow-mct-ttl

(Optional)

our-own-mac

(Optional)

tgt-not-us

(Optional)

dest-unreachs-sent

(Optional)

dest-unreachs-rec

(Optional)

admin-prohibs-sent

(Optional)

admin-prohibs-rec

(Optional)

time-excds-sent

(Optional)

time-excds-rec

(Optional)

parm-problems-sent

(Optional)

parm-problems-rec

(Optional)

echos-sent

(Optional)

echos-rec

(Optional)

echo-replies-sent

(Optional)

echo-replies-rec

(Optional)

pkt-toobigs-sent

(Optional)

pkt-toobigs-rec

(Optional)

fastpath-pkt-recv

(Optional)

fastpath-disable-pkt-recv

(Optional)

fastpath-ignore-pkt-recv

(Optional)

v1-queries-sent

(Optional)

v1-queries-rec

(Optional)

v2-queries-sent

(Optional)

v2-queries-rec

(Optional)

v1-reports-sent

(Optional)

v1-reports-rec

(Optional)

v2-reports-sent

(Optional)

v2-reports-rec

(Optional)

v1-leaves-sent

(Optional)

v1-leaves-rec

(Optional)

v2-leaves-sent

(Optional)

v2-leaves-rec

(Optional)

uptime

(Optional)

mld-config-il

(Optional)

Command Mode

- /exec

show ipv6 icmp internal event-history

show ipv6 icmp internal event-history { errors | msgs | icmpv6-internal | nd | vip-nd | mld { debugs | events } | ha | sync-event | ipv6-sync-event | lcache | lcache-errors | vrf | cli | snmp | objstr }

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

internal

Commands for internal use

event-history

Show various event logs of ICMPV

errors

Show error logs of ICMPV6

msgs

Show various message logs of ICMPV6

icmpv6-internal

Show internal debug events in ICMPV6

nd

Show ICMPV6 ND debugs

vip-nd

Show ICMPV6 ND debugs for VIP

mld

Show ICMPV6 MLD Information

events

Show ICMPV6 MLD non-periodic events

debugs

Show ICMPV6 MLD debug messages

ha

Show ICMPV6 debugs for HA events

sync-event

Show ICMPV6 debugs for CFS and MCECM related events

ipv6-sync-event

Show ICMPV6 debugs for CFS and MCECM related events for L3

lcache

Show various lcache logs of ICMPv6

lcache-errors

Show various lcache-error logs of ICMPv6

vrf

Show ICMPV6 VRF related events

cli

Show ICMPV6 CLI related events

snmp

Show ICMPV6 SNMP related events

objstr

Show ICMPV6 Object Store related events

Command Mode

- /exec

show ipv6 icmp internal event-history buffer-size

show ipv6 icmp internal event-history buffer-size { errors | icmpv6-internal | nd | mld { debugs | events } | ha | sync-event | ipv6-sync-event | vrf | cli | all }

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

internal

Commands for internal use

event-history

Show various event logs buffer sizes of ICMPV

buffer-size

Show current size of the buffers

errors

Show error logs buffer size of ICMPV6

icmpv6-internal

Show internal debug events buffer size of ICMPV6

nd

Show ICMPV6 ND debugs buffer size

mld

Show ICMPV6 MLD Information buffer size

events

Show ICMPV6 MLD non-periodic events buffer size

debugs

Show ICMPV6 MLD debug messages buffer size

ha

Show ICMPV6 debugs for HA events buffer size

sync-event

Show ICMPV6 debugs for CFS and MCECM related events buffer size

ipv6-sync-event

Show ICMPV6 debugs for CFS and MCECM related events buffer size

vrf

Show ICMPV6 VRF related events buffer size

cli

Show ICMPV6 CLI related events buffer size

all

show the sizes of all buffers

Command Mode

- /exec

show ipv6 icmp internal hmm statistics

show ipv6 icmp internal hmm statistics [ detail ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

internal

Commands for internal use

hmm

Display local HMM information

statistics

Local HMM statistics

detail

(Optional) Detailed HMM statistics

Command Mode

- /exec

show ipv6 icmp ndp

show ipv6 icmp ndp

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

ndp

Displaysipv6 neighbor by looking at the top level pt

Command Mode

- /exec

show ipv6 icmp off-list

show ipv6 icmp off-list [ vlan <vlan-id> ] [ __readonly__ [ <vlan-adj-cnt> ] [ <icmpv6-sync-adj-cnt> ] { TABLE_icmpv6_vlan_list <adj-vlan-id> <off-adj-ip-addr> <icmpv6-time-stamp> <icmpv6-mac-addr> <off-adj-flags> } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

off-list

Show adjacencies in off-list icmpv6 database

vlan

(Optional) Vlan id

vlan-id

(Optional) Show information for specified vlan

__readonly__

(Optional)

vlan-adj-cnt

(Optional)

icmpv6-sync-adj-cnt

(Optional)

TABLE_icmpv6_vlan_list

(Optional)

adj-vlan-id

(Optional)

icmpv6-time-stamp

(Optional)

icmpv6-mac-addr

(Optional)

off-adj-flags

(Optional)

Command Mode

- /exec

show ipv6 icmp process sdb

show ipv6 icmp process sdb

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

process

Display process information

sdb

Dump IPv6 sdb in a file

Command Mode

- /exec

show ipv6 icmp vaddr

show ipv6 icmp vaddr { link-local [ detail ] | global | pt-tree } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_pt_tree { <v-ipv6-addr> <v-mac-addr> <v-interface> <v-client-state> } ] [ TABLE_vrf_all [ TABLE_glo_vrf { <group-id> <protocol-vrf> <cli-uuid> <vaddr-action> <vrf-interface> <v-ipv6-addr-one> <vaddr-mac> <cxt-name> <cxt-id> } ] [ TABLE_one_int { [ <lcache-inter> <cxt-name-int> <cxt_id-int> ] <grp-id> <protocol-one-int> <client-uuid> <client-state-act> <client-in-use> <client-state> } { TABLE_vip_list { <virt-ipv6> <virt-mac> <cxt_name> <cxt_id> } [ <last-solocit-st> <last-nei-ad-st> <last-rtr-adv-st> <nxt-rtr-ad-st> <icmpv6-addr> <vmac-addr> <st-total> <rv-total> <st-err> <rv-err> <st-int-dwn-drp> <rv-int-dwn-drp> <st-adj-nt-recov-am> <rv-adj-nt-recov-am> <st-pkt-allow-inv-ttl> <rv-pkt-allow-inv-ttl> <st-pkt-drp-src-mac-own> <rv-pkt-drp-src-mac-own> <st-pkt-drp-tgt-not-own> <rv-pkt-drp-tgt-not-own> <st-pkt-drp-src-not-own> <rv-pkt-drp-src-not-own> <st-dest-unreach> <rv-dest-unreach> <st-admin-prohi> <rv-admin-prohi> <st-time-exceed> <rv-time-exceed> <st-patr-pbm> <rv-patr-pbm> <st-echo-req> <rv-echo-req> <st-echo-reply> <rv-echo-reply> <st-dup-ra> <rv-dup-ra> <st-redirect> <rv-redirect> <st-pkt-too-big> <rv-pkt-too-big> <st-rtr-adver> <rv-rtr-adver> <st-rtr-solicit> <rv-rtr-solicit> <st-nei-adver> <rv-nei-adver> <st-nei-solicit> <rv-nei-solicit> ] } ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

vaddr

Show all virtual addresses configured

link-local

Display link-local virtual ipv6 addresses

detail

(Optional) Display detailed information

global

Display global virtual ipv6 addresses

pt-tree

Display link-local virtual ipv6 addresses pt-tree information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_pt_tree

(Optional)

v-mac-addr

(Optional)

v-interface

(Optional)

v-client-state

(Optional)

TABLE_vrf_all

(Optional)

TABLE_glo_vrf

(Optional)

group-id

(Optional)

protocol-vrf

(Optional)

cli-uuid

(Optional)

vaddr-action

(Optional)

vrf-interface

(Optional)

vaddr-mac

(Optional)

cxt-name

(Optional)

cxt-id

(Optional)

TABLE_one_int

(Optional)

lcache-inter

(Optional)

cxt-name-int

(Optional)

cxt_id-int

(Optional)

grp-id

(Optional)

protocol-one-int

(Optional)

client-uuid

(Optional)

client-state-act

(Optional)

client-in-use

(Optional)

client-state

(Optional)

TABLE_vip_list

(Optional)

virt-mac

(Optional)

cxt_name

(Optional)

cxt_id

(Optional)

last-solocit-st

(Optional)

last-nei-ad-st

(Optional)

last-rtr-adv-st

(Optional)

nxt-rtr-ad-st

(Optional)

vmac-addr

(Optional)

st-total

(Optional)

rv-total

(Optional)

st-err

(Optional)

rv-err

(Optional)

st-int-dwn-drp

(Optional)

rv-int-dwn-drp

(Optional)

st-adj-nt-recov-am

(Optional)

rv-adj-nt-recov-am

(Optional)

st-pkt-allow-inv-ttl

(Optional)

rv-pkt-allow-inv-ttl

(Optional)

st-pkt-drp-src-mac-own

(Optional)

rv-pkt-drp-src-mac-own

(Optional)

st-pkt-drp-tgt-not-own

(Optional)

rv-pkt-drp-tgt-not-own

(Optional)

st-pkt-drp-src-not-own

(Optional)

rv-pkt-drp-src-not-own

(Optional)

st-dest-unreach

(Optional)

rv-dest-unreach

(Optional)

st-admin-prohi

(Optional)

rv-admin-prohi

(Optional)

st-time-exceed

(Optional)

rv-time-exceed

(Optional)

st-patr-pbm

(Optional)

rv-patr-pbm

(Optional)

st-echo-req

(Optional)

rv-echo-req

(Optional)

st-echo-reply

(Optional)

rv-echo-reply

(Optional)

st-dup-ra

(Optional)

rv-dup-ra

(Optional)

st-redirect

(Optional)

rv-redirect

(Optional)

st-pkt-too-big

(Optional)

rv-pkt-too-big

(Optional)

st-rtr-adver

(Optional)

rv-rtr-adver

(Optional)

st-rtr-solicit

(Optional)

rv-rtr-solicit

(Optional)

st-nei-adver

(Optional)

rv-nei-adver

(Optional)

st-nei-solicit

(Optional)

rv-nei-solicit

(Optional)

Command Mode

- /exec

show ipv6 icmp vpc-statistics

show ipv6 icmp vpc-statistics [ __readonly__ { TABLE_icmpv6_vpc_stats [ <icmpv6-pro-drp-pull-disable> ] [ <icmpv6-pro-drp-push-msg-disable> ] [ <icmpv6-pro-ign-snd-pull-disabe> ] [ <icmpv6-ign-snd-push-disable> ] [ <icmpv6-drp-im-fail> ] [ <icmpv6-drp-mcecm-fail> ] [ <icmpv6-drp-invalid-pc-iod> ] [ <icmpv6-drp-pt-lookup-fail> ] [ <icmpv6-drp-resp-fail-no-mct> ] [ <icmpv6-drp-resp-fail> ] [ <icmpv6-resp-sent> ] [ <icmpv6-resp-recvd> ] [ <icmpv6-resp-recv-err> ] [ <icmpv6-rcvd-msg> ] [ <icmpv6-send-fail> ] [ <icmpv6-cfs-rel-dlvry-fail> ] [ <icmpv6-cfs-rel-dnvry-suc> ] [ <icmpv6-drp-pt-add-fail> ] [ <icmpv6-drp-no-mem> ] [ <icmpv6-drp-tmr-cre-fail> ] [ <icmpv6-drp-add-adj-fail> ] [ <icmpv6-off-drp-pt-lookup-fail> ] [ <icmpv6-dont-drp-vlan-mismat> ] [ <icmpv6-drp-svi-invalid> ] [ <icmpv6-dont-drop-sv-down> ] [ <icmpv6-drp-mct-down> ] [ <icmpv6-drp-ctxt-invalid> ] [ <icmpv6-drp-vrf-invalid> ] [ <icmpv6-drp-l3addr-invalid> ] [ <icmpv6-drp-l3addr-sanity-fail> ] [ <icmpv6-drp-mac-sanity-fail> ] [ <icmpv6-own-rtr-mac> ] [ <icmpv6-drp-own-ipv6addr> ] [ <icmpv6-drp-own-vipv6add> ] [ <icmpv6-drp-adj-fail> ] [ <icmpv6-drp-subnet-mismatch> ] [ <icmpv6-drp-adj-exist> ] [ <icmpv6-dont-drp-ip-not-enable> ] [ <icmpv6-drp-total-cnt> ] [ <icmpv6-dont-drop-total-cnt> ] [ <icmpv6-add-adj> ] [ <icmpv6-del-adj> ] [ <icmpv6-adj-already-exist> ] } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

Display ICMPv6 information

vpc-statistics

Show vPC global statistics

__readonly__

(Optional)

TABLE_icmpv6_vpc_stats

(Optional) icmpv6 Vpc statistics

icmpv6-pro-drp-pull-disable

(Optional)

icmpv6-pro-drp-push-msg-disable

(Optional)

icmpv6-pro-ign-snd-pull-disabe

(Optional)

icmpv6-ign-snd-push-disable

(Optional)

icmpv6-drp-im-fail

(Optional)

icmpv6-drp-mcecm-fail

(Optional)

icmpv6-drp-invalid-pc-iod

(Optional)

icmpv6-drp-pt-lookup-fail

(Optional)

icmpv6-drp-resp-fail-no-mct

(Optional)

icmpv6-drp-resp-fail

(Optional)

icmpv6-resp-sent

(Optional)

icmpv6-resp-recvd

(Optional)

icmpv6-resp-recv-err

(Optional)

icmpv6-rcvd-msg

(Optional)

icmpv6-send-fail

(Optional)

icmpv6-cfs-rel-dlvry-fail

(Optional)

icmpv6-cfs-rel-dnvry-suc

(Optional)

icmpv6-drp-pt-add-fail

(Optional)

icmpv6-drp-no-mem

(Optional)

icmpv6-drp-tmr-cre-fail

(Optional)

icmpv6-drp-add-adj-fail

(Optional)

icmpv6-off-drp-pt-lookup-fail

(Optional)

icmpv6-dont-drp-vlan-mismat

(Optional)

icmpv6-drp-svi-invalid

(Optional)

icmpv6-dont-drop-sv-down

(Optional)

icmpv6-drp-mct-down

(Optional)

icmpv6-drp-ctxt-invalid

(Optional)

icmpv6-drp-vrf-invalid

(Optional)

icmpv6-drp-l3addr-invalid

(Optional)

icmpv6-drp-l3addr-sanity-fail

(Optional)

icmpv6-drp-mac-sanity-fail

(Optional)

icmpv6-own-rtr-mac

(Optional)

icmpv6-drp-own-ipv6addr

(Optional)

icmpv6-drp-own-vipv6add

(Optional)

icmpv6-drp-adj-fail

(Optional)

icmpv6-drp-subnet-mismatch

(Optional)

icmpv6-drp-adj-exist

(Optional)

icmpv6-dont-drp-ip-not-enable

(Optional)

icmpv6-drp-total-cnt

(Optional)

icmpv6-dont-drop-total-cnt

(Optional)

icmpv6-add-adj

(Optional)

icmpv6-del-adj

(Optional)

icmpv6-adj-already-exist

(Optional)

Command Mode

- /exec

show ipv6 interface

show ipv6 interface { [ brief [ include-secondary ] | [ <interface> | <ipv6-addr> ] [ detail ] ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_vrf <vrf-name-out> ] [ TABLE_intf <intf-name> [ <proto-state> ] [ <link-state> ] [ <admin-state> ] [ <iod> ] [ <addr> ] [ <prefix> ] [ { TABLE_sec_addr [ <sec-prefix> ] } ] [ <linklocal-addr> ] [ <linklocal-configured> ] [ <ipv6-disabled> ] [ <mrouting-enabled> ] [ <mgroup-locally-joined> ] [ { TABLE_maddr <m-addr> [ <m-addr-refcnt> ] } ] [ { TABLE_sg [ <sg-saddr> ] [ <sg-maddr> ] [ <sg-refcnt> ] } ] [ <mtu> ] [ <global-in-pcl-configured> ] [ <global-in-pcl-name> ] [ <global-in-pcl-pending> ] [ <global-out-pcl-configured> ] [ <global-out-pcl-name> ] [ <global-out-pcl-pending> ] [ <in-pcl-configured> ] [ <in-pcl-name> ] [ <in-pcl-pending> ] [ <out-pcl-configured> ] [ <out-pcl-name> ] [ <out-pcl-pending> ] [ <urpf-mode> ] [ <ipv6-lstype> ] [ <stats-last-reset> ] [ <acl-in> ] [ <acl-out> ] [ <upkt-fwd> ] [ <upkt-orig> ] [ <upkt-consumed> ] [ <ubyte-fwd> ] [ <ubyte-orig> ] [ <ubyte-consumed> ] [ <mpkt-fwd> ] [ <mpkt-orig> ] [ <mpkt-consumed> ] [ <mbyte-fwd> ] [ <mbyte-orig> ] [ <mbyte-consumed> ] [ <upkt-in-acc> ] [ <upkt-in-rej> ] [ <ubyte-in-acc> ] [ <ubyte-in-rej> ] [ <mpkt-in-acc> ] [ <mpkt-in-rej> ] [ <mbyte-in-acc> ] [ <mbyte-in-rej> ] [ <upkt-out-acc> ] [ <upkt-out-rej> ] [ <ubyte-out-acc> ] [ <ubyte-out-rej> ] [ <mpkt-out-acc> ] [ <mpkt-out-rej> ] [ <mbyte-out-acc> ] [ <mbyte-out-rej> ] [ <hw-upkt-sent> ] [ <hw-upkt-recv> ] [ <hw-ubyte-sent> ] [ <hw-ubyte-recv> ] [ <hw-mpkt-sent> ] [ <hw-mpkt-recv> ] [ <hw-mbyte-sent> ] [ <hw-mbyte-recv> ] [ <hw-upkt-drop> ] [ <hw-ubyte-drop> ] [ <hw-mpkt-drop> ] [ <hw-mbyte-drop> ] [ <hw-mpkt-rpdrop> ] [ <hw-mbyte-rpdrop> ] [ <hw-mpkt-dfdrop> ] [ <hw-mbyte-dfdrop> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

interface

Display IPv6 related interface information

brief

(Optional) Display summary of IPv6 status and configuration

include-secondary

(Optional) Display summary of all IPv6 addresses

interface

(Optional) Interface name to display

detail

(Optional) Display detailed IPv6 interface information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_intf

(Optional)

intf-name

(Optional)

proto-state

(Optional)

link-state

(Optional)

admin-state

(Optional)

iod

(Optional)

prefix

(Optional)

TABLE_sec_addr

(Optional)

sec-prefix

(Optional)

linklocal-configured

(Optional)

ipv6-disabled

(Optional)

mrouting-enabled

(Optional)

mgroup-locally-joined

(Optional)

TABLE_maddr

(Optional)

m-addr-refcnt

(Optional)

TABLE_sg

(Optional)

sg-refcnt

(Optional)

mtu

(Optional)

global-in-pcl-configured

(Optional)

global-in-pcl-name

(Optional)

global-in-pcl-pending

(Optional)

global-out-pcl-configured

(Optional)

global-out-pcl-name

(Optional)

global-out-pcl-pending

(Optional)

in-pcl-configured

(Optional)

in-pcl-name

(Optional)

in-pcl-pending

(Optional)

out-pcl-configured

(Optional)

out-pcl-name

(Optional)

out-pcl-pending

(Optional)

urpf-mode

(Optional)

ipv6-lstype

(Optional)

stats-last-reset

(Optional)

acl-in

(Optional)

acl-out

(Optional)

upkt-fwd

(Optional)

upkt-orig

(Optional)

upkt-consumed

(Optional)

ubyte-fwd

(Optional)

ubyte-orig

(Optional)

ubyte-consumed

(Optional)

mpkt-fwd

(Optional)

mpkt-orig

(Optional)

mpkt-consumed

(Optional)

mbyte-fwd

(Optional)

mbyte-orig

(Optional)

mbyte-consumed

(Optional)

upkt-in-acc

(Optional)

upkt-in-rej

(Optional)

ubyte-in-acc

(Optional)

ubyte-in-rej

(Optional)

mpkt-in-acc

(Optional)

mpkt-in-rej

(Optional)

mbyte-in-acc

(Optional)

mbyte-in-rej

(Optional)

upkt-out-acc

(Optional)

upkt-out-rej

(Optional)

ubyte-out-acc

(Optional)

ubyte-out-rej

(Optional)

mpkt-out-acc

(Optional)

mpkt-out-rej

(Optional)

mbyte-out-acc

(Optional)

mbyte-out-rej

(Optional)

hw-upkt-sent

(Optional)

hw-upkt-recv

(Optional)

hw-ubyte-sent

(Optional)

hw-ubyte-recv

(Optional)

hw-mpkt-sent

(Optional)

hw-mpkt-recv

(Optional)

hw-mbyte-sent

(Optional)

hw-mbyte-recv

(Optional)

hw-upkt-drop

(Optional)

hw-ubyte-drop

(Optional)

hw-mpkt-drop

(Optional)

hw-mbyte-drop

(Optional)

hw-mpkt-rpdrop

(Optional)

hw-mbyte-rpdrop

(Optional)

hw-mpkt-dfdrop

(Optional)

hw-mbyte-dfdrop

(Optional)

Command Mode

- /exec

show ipv6 interface global

show ipv6 interface global

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

interface

Display IPv6 related interface information

global

Show IPv6 global parameters

Command Mode

- /exec

show ipv6 internal bfd data

show ipv6 internal bfd data [ { vrf { <vrf-name> | <vrf-known-name> | all } | interface <interface> } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPV6 information

internal

Commands for internal use

bfd

show bfd related internal information

data

bfd internal data structure

vrf

(Optional) Display per-VRF information

all

(Optional) Display all VRFs

interface

(Optional) Display interface related bfd information

interface

(Optional) Interface for which bfd info is required

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show ipv6 internal context array

show ipv6 internal [ api ] context array

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

internal

Commands for internal use

api

(Optional) Show api values

context

Display context info

array

Print the array which stores context ptrs

Command Mode

- /exec

show ipv6 internal event-history

show ipv6 internal event-history { errors | msgs | ipc | ha | log | sdb | snmp | bfd | objstr }

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPV6 information

internal

Commands for internal use

event-history

Show various event logs of IPV6

errors

Show error logs of IPV6

msgs

Show various message logs of IPV6

log

Show syslog message of IPV6

ipc

Show ipc debug message of IPV6

snmp

Show snmp debug message of IPV6

ha

Show ha debug message of IPV6

sdb

Show sdb debug message of IPV6

bfd

Show bfd related event history

objstr

Show Object Store logs of IPV6

Command Mode

- /exec

show ipv6 internal event-history buffer-size

show ipv6 internal event-history buffer-size { errors | log | ipc | snmp | ha | sdb | bfd | all }

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPV6 information

internal

Commands for internal use

event-history

various event logs of IP

buffer-size

Show current size of the buffers

errors

Show error logs buffer size of IPV6

log

Show syslog message buffer size of IPV6

ipc

Show ipc debug message buffer size of IPV6

snmp

Show snmp debug message buffer size of IPV6

ha

Show ha debug message buffer size of IPV6

sdb

Show sdb debug message buffer size of IPV6

bfd

Show bfd debug message buffr size of IPV6

all

Show sizes of all event history buffers

Command Mode

- /exec

show ipv6 internal info

show ipv6 internal { info | fastboot-cache }

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPV6 information

internal

Commands for internal use

info

Commands for internal use

fastboot-cache

Show IPv6 cache for fastboot recovery

Command Mode

- /exec

show ipv6 internal mem

show ipv6 internal { mem-stats [ shared | all ] [ no-libs ] [ detail ] }

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

internal

Display internal ipv6 information

shared

(Optional) Display shared memory statistics

all

(Optional) Display private and shared memory statistics

mem-stats

Show memory allocation statistics

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

Command Mode

- /exec

show ipv6 internal netstack m6rib

show ipv6 internal netstack { m6rib-txlist [ vrf { <vrf-name> | <vrf-known-name> } ] | m6rib-buffers }

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

internal

Commands for internal use

netstack

Netstack's local cache

m6rib-txlist

Show M6RIB transmission-list information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

m6rib-buffers

Show M6RIB route buffer information

Command Mode

- /exec

show ipv6 internal netstack mroute

show ipv6 internal netstack mroute [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

internal

Commands for internal use

netstack

Netstack's local cache

mroute

Multicast route information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show ipv6 lisp data-cache

show ipv6 lisp data-cache [ <eid> ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

lisp

LISP show commands

data-cache

Display EID-to-RLOC data cache mapping in this ITR

eid

(Optional) Display mapping for IPv6 destination EID

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show ipv6 local-pt

show ipv6 local-pt [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

local-pt

Display IPv6 local address pt data structure

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display all VRFs

Command Mode

- /exec

show ipv6 local policy

show ipv6 local policy [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_pbr <interface> <rmap> <status> <vrf_name> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

local

IPv6 local options

policy

Policy routing

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_pbr

(Optional)

interface

(Optional)

rmap

(Optional)

status

(Optional)

vrf_name

(Optional)

Command Mode

- /exec

show ipv6 mld groups

show ipv6 [ icmp ] mld groups [ { <source> [ <group> ] } | { <group> [ <source> ] } ] [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name-out> <entry-count> TABLE_group <group-out> TABLE_intf <intf-name> <icmpv6-disabled> <mld-source> <mld-group> <mld-source-unspec> <mld-static> <mld-local-group> <mld-translated> <mld-uptime> <mld-expire> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

(Optional) Display ICMPv6 information

mld

Display Multicast Listener Discovery information

groups

Display MLD attached group membership information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

interface

(Optional) Display group membership on interface name

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

entry-count

(Optional)

TABLE_group

(Optional)

TABLE_intf

(Optional)

intf-name

(Optional)

icmpv6-disabled

(Optional)

mld-source-unspec

(Optional)

mld-static

(Optional)

mld-local-group

(Optional)

mld-translated

(Optional)

mld-uptime

(Optional)

mld-expire

(Optional)

Command Mode

- /exec

show ipv6 mld internal errors

show ipv6 [ icmp ] mld internal errors

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

(Optional) Display ICMPv6 information

mld

Display Multicast Listener Discovery information

internal

Commands for internal use

errors

Show MLD errors

Command Mode

- /exec

show ipv6 mld internal m6rib

show ipv6 [ icmp ] mld internal { m6rib-txlist [ vrf { <vrf-name> | <vrf-known-name> | all } ] | m6rib-buffers }

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

(Optional) Display ICMPv6 information

mld

Display Multicast Listener Discovery information

internal

Commands for internal use

m6rib-txlist

Show M6RIB transmission-list information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all MLD VRFs

m6rib-buffers

Show M6RIB route buffer information

Command Mode

- /exec

show ipv6 mld local-groups

show ipv6 [ icmp ] mld local-groups [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf> { TABLE_entry <group-addr> <source-addr> <static-oif> <local-group> <if-name> <last-reported> } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

(Optional) Display ICMPv6 information

mld

Display Multicast Listener Discovery information

local-groups

Display MLD local group membership information

interface

(Optional) Display group membership on interface name

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf

(Optional)

TABLE_entry

(Optional)

static-oif

(Optional)

local-group

(Optional)

if-name

(Optional)

last-reported

(Optional)

Command Mode

- /exec

show ipv6 mld route internal

show ipv6 [ icmp ] mld route internal [ static ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

(Optional) Display ICMPv6 information

mld

Display Multicast Listener Discovery information

route

Show internal MLD route cache

internal

Commands for internal use

static

(Optional) Show static OIFs

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show ipv6 mld vrf all

show ipv6 [ icmp ] mld vrf all

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

icmp

(Optional) Display ICMPv6 information

mld

Display Multicast Listener Discovery information

vrf

Display per-VRF information

all

Display MLD VRFs

Command Mode

- /exec

show ipv6 mtu

show ipv6 mtu [ statistics | vrf { <vrf-name> | <vrf-known-name> | all [ detail ] } ] [ __readonly__ [ TABLE_mtu_stat <out-ent> <exp-ent> <purge-ent> <int-err> <pkt-too-big> <cache-miss> <cache-upd> <mtu-small> <cache-no-upd> ] [ TABLE_mtu_vrf [ <tot-ipv6-mtu> ] [ TABLE_one_mtu [ <pmtu-cntxt> ] [ { <mtu-ipv6> <mtu-cache> <up-time> <iod-lcache> } ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPV6 information

mtu

Display IPV6 Path MTU Cache

statistics

(Optional) Display non-TCP Path MTU Statistics

vrf

(Optional) Clear information for particular VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

detail

(Optional) Display IPV6 Path MTU Cache with detail

__readonly__

(Optional)

TABLE_mtu_stat

(Optional)

out-ent

(Optional)

exp-ent

(Optional)

purge-ent

(Optional)

int-err

(Optional)

pkt-too-big

(Optional)

cache-miss

(Optional)

cache-upd

(Optional)

mtu-small

(Optional)

cache-no-upd

(Optional)

TABLE_mtu_vrf

(Optional)

tot-ipv6-mtu

(Optional)

TABLE_one_mtu

(Optional)

pmtu-cntxt

(Optional)

mtu-cache

(Optional)

up-time

(Optional)

iod-lcache

(Optional)

Command Mode

- /exec

show ipv6 nd ra dns search-list

show ipv6 nd ra dns search-list [ interface <interface> ] [ __readonly__ { TABLE_intf <intf_name> <dns_supress_server_list> [ { TABLE_list <list_no> <list_name> [ { <finite> | <infinite> } ] <seq_no> } ] } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

nd

ICMPv6 Neighbor Discovery commands

ra

Router Advertisement

dns

Domain Name System

search-list

DNS Search List

interface

(Optional) Display DNS Search List information on interface

interface

(Optional) Interface name to display

__readonly__

(Optional)

TABLE_intf

(Optional) IPV6 Interface name

intf_name

(Optional) Interface name

dns_supress_server_list

(Optional) DNS Supress server list

TABLE_list

(Optional) Search list

list_no

(Optional) Search list number

list_name

(Optional) Search list name

finite

(Optional) Search list life time

infinite

(Optional) Search list infinte time

seq_no

(Optional) Search list sequence number

Command Mode

- /exec

show ipv6 nd ra dns server

show ipv6 nd ra dns server [ interface <interface> ] [ __readonly__ { TABLE_intf <intf_name> <dns_supress_server_list> [ { TABLE_list <dns_server> <dns_addr> [ { <finite> | <infinite> } ] <seq_no> } ] } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

nd

ICMPv6 Neighbor Discovery commands

ra

Router Advertisement

dns

Domain Name System

server

Domain Name System Server

interface

(Optional) Display Recursive DNS Server List information on interface

interface

(Optional) Interface name to display

__readonly__

(Optional)

TABLE_intf

(Optional) IPV6 Interface name

intf_name

(Optional) Interface name

dns_supress_server_list

(Optional) DNS Supress server list

TABLE_list

(Optional) Search list

dns_server

(Optional) DNS server number

dns_addr

(Optional) DNS server address

finite

(Optional) DNS server life time

infinite

(Optional) DNS server time infinte

seq_no

(Optional) DNS server sequence number

Command Mode

- /exec

show ipv6 nd rt-pref global pt

show ipv6 nd rt-pref global pt

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

nd

ICMPv6 Neighbor Discovery commands

rt-pref

Router Preference

global

Global

pt

PTREE

Command Mode

- /exec

show ipv6 ndp

show ipv6 ndp

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

ndp

Show IPv6 neighbors from netstack

Command Mode

- /exec

show ipv6 neighbor static

show ipv6 neighbor static [ interface <interface> ] [ __readonly__ [ TABLE_i6_nei { <nei-ipv6> <nei-mac> <nei-iod> <nei-if-iod> } ] [ <tot-nei-ent> ] [ TABLE_nei_cnt { <nei-ipv6-tot> <nei-mac-tot> <nei-iod-tot> <nei-if-iod-tot> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

neighbor

Show IPv6 neighbor entry

static

Displays only static neighbors

interface

(Optional) Display IPv6 related interface information

interface

(Optional) Interface name to display

__readonly__

(Optional)

TABLE_i6_nei

(Optional)

nei-mac

(Optional)

nei-iod

(Optional)

nei-if-iod

(Optional)

tot-nei-ent

(Optional)

TABLE_nei_cnt

(Optional)

nei-mac-tot

(Optional)

nei-iod-tot

(Optional)

nei-if-iod-tot

(Optional)

Command Mode

- /exec

show ipv6 pim bitfield

show ipv6 pim bitfield

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

bitfield

Display compressed bitfield details

Command Mode

- /exec

show ipv6 pim df

show ipv6 pim df [ <rp-or-group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-context> { TABLE_rp <rp-addr> <df-ordinal> <df-bits> <df-bits-count> <metric-pref> <metric> { TABLE_grange <grange-grp> <grange-masklen> } { TABLE_iod <if-name> <df-winner> <df-state> <winner-metric-pref> <winner-metric> <uptime> <is-rpf> } } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

df

Display Bidir Designated Forwarders

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-context

(Optional)

TABLE_rp

(Optional)

df-ordinal

(Optional)

df-bits

(Optional)

df-bits-count

(Optional)

metric-pref

(Optional)

metric

(Optional)

TABLE_grange

(Optional)

grange-masklen

(Optional)

TABLE_iod

(Optional)

if-name

(Optional)

df-state

(Optional)

winner-metric-pref

(Optional)

winner-metric

(Optional)

uptime

(Optional)

is-rpf

(Optional)

Command Mode

- /exec

show ipv6 pim embed-rp

show ipv6 pim embed-rp <group>

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

embed-rp

Display Embed-RP group address mapping

Command Mode

- /exec

show ipv6 pim event-history

show ipv6 pim [ internal ] event-history { errors | msgs | <pim6-event-hist-buf-name> | statistics }

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

PIM6 global configuration commands

internal

(Optional) Commands for internal use

event-history

Show various event logs of PIM6

errors

Show error logs of PIM6

msgs

Show various message logs of PIM6

pim6-event-hist-buf-name

Show logs of event-hist buffer

statistics

Show state and size of buffers

Command Mode

- /exec

show ipv6 pim fabric info

show ipv6 pim fabric info [ __readonly__ <switch_role> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

fabric

Fabric functionality

info

show the fabric info

__readonly__

(Optional)

switch_role

(Optional)

Command Mode

- /exec

show ipv6 pim fabric legacy-vlans

show ipv6 pim fabric legacy-vlans [ __readonly__ TABLE_legacy_vlan <vlan_id> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

fabric

Fabric functionality

legacy-vlans

Show legacy VLANs on this switch

__readonly__

(Optional)

TABLE_legacy_vlan

(Optional)

vlan_id

(Optional)

Command Mode

- /exec

show ipv6 pim group-range

show ipv6 pim group-range [ <group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-context> { TABLE_group <grp-addr> <invalid-grp> <mode> <rp-addr> <sh-tree-only-range> } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

group-range

Display the various group ranges

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-context

(Optional)

TABLE_group

(Optional)

invalid-grp

(Optional)

mode

(Optional)

Command Mode

- /exec

show ipv6 pim interface show ipv6 pim interface

show ipv6 pim interface <interface> | show ipv6 pim interface [ brief ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-context> { TABLE_iod <if-name> <if-addr> <dr> <nbr-cnt> <is-border> <is-iface-in-cib> <is-pim-enabled> <if-addr-summary> <if-status> <dr-priority> <no-dr-priority> <hello-interval-sec> <hello-interval-msec> <hello-timer> <holdtime-sec> <holdtime-msec> <genid> <isauth-config> <is-passive> <nbr-policy-name> <jp-in-policy-name> <jp-out-policy-name> <last-cleared> <hello-sent> <hello-rcvd> <jp-sent> <jp-rcvd> <assert-sent> <assert-rcvd> <graft-sent> <graft-rcvd> <graft-ack-sent> <graft-ack-rcvd> <df-offer-sent> <df-offer-rcvd> <df-winner-sent> <df-winner-rcvd> <df-backoff-sent> <df-backoff-rcvd> <pass-sent> <pass-rcvd> <cksum-errors> <invalid-errors> <invalid-df-errors> <auth-failed> <pak-len-errors> <ver-errors> <pkts-self> <pkts-non-nbr> <pkts-on-passive> <jp-rcvd-on-rpf> <jp-rcvd-no-rp> <jp-rcvd-wrong-rp> <jp-rcvd-for-ssm> <jp-rcvd-for-bidir> <jp-in-policy-filter> <jp-out-policy-filter> } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

interface

Display PIM6 interface related information

interface

Interface name of single interface to display

brief

(Optional) Display one line status per interface

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-context

(Optional)

TABLE_iod

(Optional)

if-name

(Optional)

nbr-cnt

(Optional)

is-iface-in-cib

(Optional)

is-pim-enabled

(Optional)

is-border

(Optional)

if-addr-summary

(Optional)

if-status

(Optional)

dr-priority

(Optional)

no-dr-priority

(Optional)

hello-interval-sec

(Optional)

hello-interval-msec

(Optional)

hello-timer

(Optional)

holdtime-sec

(Optional)

holdtime-msec

(Optional)

genid

(Optional)

isauth-config

(Optional)

is-passive

(Optional)

nbr-policy-name

(Optional)

jp-in-policy-name

(Optional)

jp-out-policy-name

(Optional)

last-cleared

(Optional)

hello-sent

(Optional)

hello-rcvd

(Optional)

jp-sent

(Optional)

jp-rcvd

(Optional)

assert-sent

(Optional)

assert-rcvd

(Optional)

graft-sent

(Optional)

graft-rcvd

(Optional)

graft-ack-sent

(Optional)

graft-ack-rcvd

(Optional)

df-offer-sent

(Optional)

df-offer-rcvd

(Optional)

df-winner-sent

(Optional)

df-winner-rcvd

(Optional)

df-backoff-sent

(Optional)

df-backoff-rcvd

(Optional)

pass-sent

(Optional)

pass-rcvd

(Optional)

cksum-errors

(Optional)

invalid-errors

(Optional)

invalid-df-errors

(Optional)

auth-failed

(Optional)

pak-len-errors

(Optional)

ver-errors

(Optional)

pkts-self

(Optional)

pkts-non-nbr

(Optional)

pkts-on-passive

(Optional)

jp-rcvd-on-rpf

(Optional)

jp-rcvd-no-rp

(Optional)

jp-rcvd-wrong-rp

(Optional)

jp-rcvd-for-ssm

(Optional)

jp-rcvd-for-bidir

(Optional)

jp-in-policy-filter

(Optional)

jp-out-policy-filter

(Optional)

Command Mode

- /exec

show ipv6 pim internal

show ipv6 pim internal

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

internal

Commands for internal use

Command Mode

- /exec

show ipv6 pim internal buffers

show ipv6 pim internal buffers [ { [ all <count> ] [ free <count> ] } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

internal

Commands for internal use

buffers

Display detailed buffer statistics

all

(Optional) Dump buffers from ALL list

free

(Optional) Dump buffers from FREE list

count

(Optional) Number of buffers to dump

Command Mode

- /exec

show ipv6 pim internal errors

show ipv6 pim internal errors

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

internal

Commands for internal use

errors

Show PIM6 errors

Command Mode

- /exec

show ipv6 pim internal library-info

show ipv6 pim internal library-info

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

PIM6 global configuration commands

internal

Commands for internal use

library-info

Show various event logs of library

Command Mode

- /exec

show ipv6 pim internal mem-stats

show ipv6 pim internal mem-stats [ shared | all ] [ no-libs ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

internal

Commands for internal use

mem-stats

Show memory allocation statistics

shared

(Optional) Display shared memory statistics

all

(Optional) Display private and shared memory statistics

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

Command Mode

- /exec

show ipv6 pim internal pss-dump df-states

show ipv6 pim internal pss-dump df-states [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

internal

Commands for internal use

pss-dump

Dispaly info stored in PSS

df-states

DF elected winner / loser information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show ipv6 pim neighbor

show ipv6 pim neighbor { [ <interface> ] | [ <ipv6addr> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_vrf <out-context> [ TABLE_neighbor <nbr-addr><if-name><uptime><expires> [ <dr-priority> ] <bidir-capable> <bfd-state><name> [ TABLE_secondary <sec-addr> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

neighbor

Display PIM6 neighbor related information

interface

(Optional) Display neighbors on single interface name

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

out-context

(Optional)

TABLE_neighbor

(Optional)

dr-priority

(Optional)

bidir-capable

(Optional)

TABLE_secondary

(Optional)

Command Mode

- /exec

show ipv6 pim oif-list

show ipv6 pim oif-list <group> [ <source> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name> { TABLE_grp <mcast-addrs> <incoming-intf> <rpf-nbr> <timeout-interval> <oif-list-count> [ { TABLE_oiflist <oif-name> } ] <timeout-list-count> [ { TABLE_timeoutlist <timeoutoif-name> } ] <immediate-list-count> [ { TABLE_immediatelist <immediateoif-name> } ] <immediate-timeout-list-count> [ { TABLE_immediatetimeoutlist <immediatetimeoutoif-name> } ] <sgr-prune-list-count> [ { TABLE_sgrprunelist <sgrprunelistoif-name> } ] } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

oif-list

Display interfaces for oif-list of PIM6 route

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name

(Optional)

TABLE_grp

(Optional)

mcast-addrs

(Optional)

incoming-intf

(Optional)

timeout-interval

(Optional)

oif-list-count

(Optional)

TABLE_oiflist

(Optional)

oif-name

(Optional)

timeout-list-count

(Optional)

TABLE_timeoutlist

(Optional)

timeoutoif-name

(Optional)

immediate-list-count

(Optional)

TABLE_immediatelist

(Optional)

immediateoif-name

(Optional)

immediate-timeout-list-count

(Optional)

TABLE_immediatetimeoutlist

(Optional)

immediatetimeoutoif-name

(Optional)

sgr-prune-list-count

(Optional)

TABLE_sgrprunelist

(Optional)

sgrprunelistoif-name

(Optional)

Command Mode

- /exec

show ipv6 pim policy statistics jp

show ipv6 pim policy statistics { jp-policy | neighbor-policy } <interface> [ __readonly__ { TABLE_routemap <name> <action> <seq_num> [ { TABLE_cmd <command> <match_count> <compare_count> } ] } <total_accept_count> <total_reject_count> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

PIM6 global configuration commands

policy

Policy related information

statistics

Policy statistics

jp-policy

Statistics for jp-policy

neighbor-policy

Statistics for neighbor-policy

interface

Interface to display policy statistics for

__readonly__

(Optional)

TABLE_routemap

(Optional)

name

(Optional)

action

(Optional)

seq_num

(Optional)

TABLE_cmd

(Optional)

command

(Optional)

compare_count

(Optional)

match_count

(Optional)

total_accept_count

(Optional)

total_reject_count

(Optional)

Command Mode

- /exec

show ipv6 pim route

show ipv6 pim route { [ bitfield ] | <source> <group> | <group> [ <source> ] [ bitfield ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <context-name> <route-count> [ TABLE_one_route <mcast-addrs> [ <rp-addr> <rp-local> ] <bidir> <sgexpire> <is-fabricowned> [ <sgrexpire> ] [ <timeleft> ] <rp-bit> [ <register> ] [ <assert-timeout> ] <intf-name> <rpf-nbr-1> <rpf-nbr-addr> <rpf-nbr-2> [ <metric-pref> <route-metric> ] [ <oif-count> ] [ <oif-bf-str> ] [ <timeout-count> ] [ <timeout-bf-str> ] [ <immediate-count> ] [ <immediate-bf-str> ] [ <immediate-timeout-count> ] [ <immediate-timeout-bf-str> ] [ <sgr-prune-list-count> ] [ <sgr-prune-list-bf-str> ] [ <timeout-interval> <jp-holdtime-rndup> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

route

Display PIM6 specific route information

bitfield

(Optional) Display details of each bitfield for PIM6 route

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

context-name

(Optional)

route-count

(Optional)

TABLE_one_route

(Optional)

mcast-addrs

(Optional)

rp-addr

(Optional)

rp-local

(Optional)

bidir

(Optional)

sgexpire

(Optional)

is-fabricowned

(Optional)

sgrexpire

(Optional)

timeleft

(Optional)

rp-bit

(Optional)

register

(Optional)

assert-timeout

(Optional)

intf-name

(Optional)

rpf-nbr-1

(Optional)

rpf-nbr-addr

(Optional)

rpf-nbr-2

(Optional)

metric-pref

(Optional)

route-metric

(Optional)

oif-count

(Optional)

oif-bf-str

(Optional)

timeout-count

(Optional)

timeout-bf-str

(Optional)

immediate-count

(Optional)

immediate-bf-str

(Optional)

immediate-timeout-count

(Optional)

immediate-timeout-bf-str

(Optional)

sgr-prune-list-count

(Optional)

sgr-prune-list-bf-str

(Optional)

timeout-interval

(Optional)

jp-holdtime-rndup

(Optional)

Command Mode

- /exec

show ipv6 pim route internal

show ipv6 pim route internal [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

PIM6 global configuration commands

internal

Commands for internal use

route

Display PIM6 internal route cache

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show ipv6 pim rp-hash

show ipv6 pim rp-hash <group> [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-context> <rp-found> <is-rp-bsr-learnt> <out-group> <hash-length> <out-bsr> { TABLE_rp <rp-addr> <hash> <isbest_hash> } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

rp-hash

Display RP hash value for group

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-context

(Optional)

rp-found

(Optional)

is-rp-bsr-learnt

(Optional)

hash-length

(Optional)

TABLE_rp

(Optional)

hash

(Optional)

isbest_hash

(Optional)

Command Mode

- /exec

show ipv6 pim rp

show ipv6 pim rp [ <group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <out-context> <is-bsr-enabled> <is-bsr-listen-only> <is-bsr-forward-only> <are-we-bsr> <bsr-address> <is-bsr-address> <bsr-priority> <bsr-hash-masklen> <bs-timer> <bsr-uptime> <bsr-expires> <is-autorp-enabled> <is-autorp-listen-only> <is-autorp-forward-only> <are-we-autorp> <autorp-address> <is-autorp-address> <autorp-dis-timer> <autorp-up-time> <autorp-expire-time> <rp-cand-policy-name> <bsr-policy-name> <rp-announce-policy-name> <rp-discovery-policy-name> { TABLE_anycast_rp <anycast-rp-addr> { TABLE_arp_rp <arp-rp-addr> <is-rpaddr-local> } } { TABLE_rp <rp-addr> <is-rp-in-cib> <df-ordinal> <rp-uptime> <rp-priority> <autorp-expires> <bsr-rp-expires> <autorp-info-src> <bsr-info-src> <is-rp-static> <static-rp-group-map> { TABLE_grange <grange-grp> <grange-masklen> <is-bidir-grp> <is-autorp-rp-owner> <is-bsr-rp-owner> <is-static-rp-owner> } } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

rp

Display PIM6 RP, Auto-RP, and BSR related information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

out-context

(Optional)

is-bsr-enabled

(Optional)

is-bsr-listen-only

(Optional)

is-bsr-forward-only

(Optional)

are-we-bsr

(Optional)

is-bsr-address

(Optional)

bsr-priority

(Optional)

bsr-hash-masklen

(Optional)

bs-timer

(Optional)

bsr-uptime

(Optional)

bsr-expires

(Optional)

is-autorp-enabled

(Optional)

is-autorp-listen-only

(Optional)

is-autorp-forward-only

(Optional)

are-we-autorp

(Optional)

is-autorp-address

(Optional)

autorp-dis-timer

(Optional)

autorp-up-time

(Optional)

autorp-expire-time

(Optional)

rp-cand-policy-name

(Optional)

bsr-policy-name

(Optional)

rp-announce-policy-name

(Optional)

rp-discovery-policy-name

(Optional)

TABLE_anycast_rp

(Optional)

TABLE_arp_rp

(Optional)

is-rpaddr-local

(Optional)

TABLE_rp

(Optional)

is-rp-in-cib

(Optional)

df-ordinal

(Optional)

rp-uptime

(Optional)

rp-priority

(Optional)

autorp-expires

(Optional)

bsr-rp-expires

(Optional)

is-rp-static

(Optional)

static-rp-group-map

(Optional)

TABLE_grange

(Optional)

grange-masklen

(Optional)

is-bidir-grp

(Optional)

is-autorp-rp-owner

(Optional)

is-bsr-rp-owner

(Optional)

is-static-rp-owner

(Optional)

Command Mode

- /exec

show ipv6 pim statistics

show ipv6 pim statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <uptime> <reg-sent> <reg-rcvd> <null-reg-sent> <null-reg-rcvd> <reg-stop-sent> <reg-stop-rcvd> <reg-rcvd-not-rp> <reg-rcvd-for-ssm> <reg-rcvd-for-bidir> <bootstrap-sent> <bootstrap-rcvd> <cand-rp-sent> <cand-rp-rcvd> <bs-no-nbr> <bs-border-deny> <bs-len-errors> <bs-rpf-failed> <bs-no-listen> <candrp-border-deny> <candrp-no-listen> <autorp-announce-sent> <autorp-announce-rcvd> <autorp-discovery-sent> <autorp-discovery-rcvd> <autorp-rpf-failed> <autorp-border-deny> <autorp-invalid-type> <autorp-ttl-expired> <autorp-no-listen> <ctrl-no-route> <data-no-route> <no-state> <create-state> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

statistics

Packet counter statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

uptime

(Optional)

reg-sent

(Optional)

reg-rcvd

(Optional)

null-reg-sent

(Optional)

null-reg-rcvd

(Optional)

reg-stop-sent

(Optional)

reg-stop-rcvd

(Optional)

reg-rcvd-not-rp

(Optional)

reg-rcvd-for-ssm

(Optional)

reg-rcvd-for-bidir

(Optional)

bootstrap-sent

(Optional)

bootstrap-rcvd

(Optional)

cand-rp-sent

(Optional)

cand-rp-rcvd

(Optional)

bs-no-nbr

(Optional)

bs-border-deny

(Optional)

bs-len-errors

(Optional)

bs-rpf-failed

(Optional)

bs-no-listen

(Optional)

candrp-border-deny

(Optional)

candrp-no-listen

(Optional)

autorp-announce-sent

(Optional)

autorp-announce-rcvd

(Optional)

autorp-discovery-sent

(Optional)

autorp-discovery-rcvd

(Optional)

autorp-rpf-failed

(Optional)

autorp-border-deny

(Optional)

autorp-invalid-type

(Optional)

autorp-ttl-expired

(Optional)

autorp-no-listen

(Optional)

ctrl-no-route

(Optional)

data-no-route

(Optional)

no-state

(Optional)

create-state

(Optional)

Command Mode

- /exec

show ipv6 pim vrf

show ipv6 pim vrf [ { <vrf-name> | <vrf-known-name> | all } ] [ detail ] [ __readonly__ TABLE_context <out-context> <context-id> <table-id> <count> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

pim

Display PIM6 status and configuration

vrf

Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display all VRFs PIM6 is configured for

detail

(Optional) Display detailed information

__readonly__

(Optional)

TABLE_context

(Optional)

out-context

(Optional)

context-id

(Optional)

table-id

(Optional)

count

(Optional)

Command Mode

- /exec

show ipv6 policy

show ipv6 policy [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_pbr <interface> <rmap> <status> <vrf_name> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

policy

Policy routing

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_pbr

(Optional)

interface

(Optional)

rmap

(Optional)

status

(Optional)

vrf_name

(Optional)

Command Mode

- /exec

show ipv6 prefix-list

show ipv6 prefix-list { { [ detail | summary ] [ <ipv6-pfl-name> | <ipv6-pfl-cfg-name> ] } | { { <ipv6-pfl-name> | <ipv6-pfl-cfg-name> } seq <seq-no> } | { { <ipv6-pfl-name> | <ipv6-pfl-cfg-name> } <prefix> [ first-match | longer ] } } [ __readonly__ TABLE_ipv6_pfl <name> <seq> <action> <rule> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

detail

(Optional) Show detailed information

summary

(Optional) Show summarized information

prefix-list

List IPv6 prefix lists

ipv6-pfl-name

(Optional) Name of prefix-list

ipv6-pfl-cfg-name

(Optional) Known prefix-list name

seq

Sequence number

seq-no

Sequence number

first-match

(Optional) Find the first match

longer

(Optional) Find the more specific entries

__readonly__

(Optional)

TABLE_ipv6_pfl

(Optional)

name

(Optional)

seq

(Optional)

action

(Optional)

rule

(Optional)

Command Mode

- /exec

show ipv6 process

show ipv6 process [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_ipv6_all { <cnxt-name> <cnxt-id> } ] [ TABLE_ipv6 { <ipv6-vrf> <ipv6-vrf-id> <auto-disc> <auto-add> <sta-disc> <sta-def> [ <ipv6-unreach> ] } [ TABLE_iod { <iod-val> <iod-ifind> } ] [ TABLE_ipv6_nxt { <ipv6-nxt> } ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

process

Display IPv6 global information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display all VRFs

__readonly__

(Optional)

TABLE_ipv6_all

(Optional)

cnxt-name

(Optional)

cnxt-id

(Optional)

TABLE_ipv6

(Optional)

ipv6-vrf

(Optional)

ipv6-vrf-id

(Optional)

auto-disc

(Optional)

auto-add

(Optional)

sta-disc

(Optional)

sta-def

(Optional)

ipv6-unreach

(Optional)

TABLE_iod

(Optional)

iod-val

(Optional)

iod-ifind

(Optional)

TABLE_ipv6_nxt

(Optional)

Command Mode

- /exec

show ipv6 process sdb

show ipv6 process sdb

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

process

Display IPv6 global information

sdb

Dump IPv6 sdb in a file

Command Mode

- /exec

show ipv6 raguard statistics

show ipv6 raguard statistics [ interface <intf-range> ] [ __readonly__ <msg_stats_hdr> <intf2> <rx_pkts> <drop_count> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Show the IPv6 features of the system

raguard

IPV6 raguard

statistics

RA packet drop count

interface

(Optional) Raguard enabled interfaces

intf-range

(Optional) interface

__readonly__

(Optional) Read only

msg_stats_hdr

(Optional)

intf2

(Optional) interface name

rx_pkts

(Optional)

drop_count

(Optional)

Command Mode

- /exec

show ipv6 rip policy statistics redistribute

show ipv6 rip [ instance <inst> ] policy statistics redistribute { bgp <as> | { eigrp | isis | <src-rip> | ospfv3 | lisp } <tag> | direct | static } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

rip

Display RIP routing protocol status

instance

(Optional) Process ID

inst

(Optional) Process ID

policy

Policy related information

statistics

Policy statistics

redistribute

RIP redistribute routes from other routing protocol

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

eigrp

Enhanced Interior Gateway Routing Protocol (EIGRP)

isis

Intermediate-to-intermediate (ISIS)

src-rip

Routing Information Protocol (RIP)

ospfv3

Open Shortest Path First (OSPFv3)

lisp

LISP EID-prefixes

tag

Process tag

direct

Directly connected routes

static

Static routes

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show ipv6 routers

show ipv6 routers [ all-routers ] [ [ interface <interface> ] | [ vrf { <vrf-name> | <vrf-known-name> | all } ] ] [ __readonly__ { TABLE_ipv6_routers [ TABLE_interface_ipv6 { <rtr-ipv6> <ipv6-int-addr> <rtr-flo-time> <curr-hop-lmt> <life-time> <addr-flag> <other-flg> <mtu-rtr> <hm-agent-flg> <preference> <reach-time> <retrans-time> [ TABLE_prefix_ipv6 { <ipv6-prefix> <buf-ipv6> <buf-autono> <valid-life-time> <prefer-life> } ] } ] } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

routers

Display neighbor router information

all-routers

(Optional) All routers even on down interface

interface

(Optional) Display neighbor router information on interface

interface

(Optional) Interface name to display

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_ipv6_routers

(Optional)

TABLE_interface_ipv6

(Optional)

ipv6-int-addr

(Optional)

rtr-flo-time

(Optional)

curr-hop-lmt

(Optional)

life-time

(Optional)

addr-flag

(Optional)

other-flg

(Optional)

mtu-rtr

(Optional)

hm-agent-flg

(Optional)

preference

(Optional)

reach-time

(Optional)

retrans-time

(Optional)

TABLE_prefix_ipv6

(Optional)

ipv6-prefix

(Optional)

buf-ipv6

(Optional)

buf-autono

(Optional)

valid-life-time

(Optional)

prefer-life

(Optional)

Command Mode

- /exec

show ipv6 static-route

show ipv6 static-route [ <prefix> ] [ multicast ] [ track-table ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_route <prefix-out> <next-hop> <intf-name> <pref> <real-nh> <has-real-intf> <real-intf-name> TABLE_track-table ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

static-route

Display configured static routes

multicast

(Optional) Display configured static mroutes

track-table

(Optional) Display track object details associated with static routes

all

(Optional) Display all VRFs

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_route

(Optional)

intf-name

(Optional)

pref

(Optional)

has-real-intf

(Optional)

real-intf-name

(Optional)

TABLE_track-table

(Optional)

Command Mode

- /exec

show ipv6 statistics

show ipv6 statistics

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

statistics

Display IPv6 global statistics

Command Mode

- /exec

show ipv6 traffic

show ipv6 traffic [ detail ] [ vrf { <vrf-name> | <vrf-known-name> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_ipv6_traffic <uptime> <upkt-fwd> <mpkt-fwd> <ubyte-fwd> <mbyte-fwd> <upkt-orig> <mpkt-orig> <ubyte-orig> <mbyte-orig> <upkt-consumed> <mpkt-consumed> <ubyte-consumed> <mbyte-consumed> <ufrag-orig> <mfra-orig> <ufrag-consumed> <mfrag-consumed> <bad-version> <rt-lookup-fail> <hoplimit-excd> <opt-header-error> <pld-length-too-small> <pm-failed> <mbuf-error> <could-not-enc> <dest-if-down> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

Display IPv6 information

traffic

Display IPv6 traffic statistics

detail

(Optional) Display per protocol IPv6 statistics

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_ipv6_traffic

(Optional)

uptime

(Optional)

upkt-fwd

(Optional)

mpkt-fwd

(Optional)

ubyte-fwd

(Optional)

mbyte-fwd

(Optional)

upkt-orig

(Optional)

mpkt-orig

(Optional)

ubyte-orig

(Optional)

mbyte-orig

(Optional)

upkt-consumed

(Optional)

mpkt-consumed

(Optional)

ubyte-consumed

(Optional)

mbyte-consumed

(Optional)

ufrag-orig

(Optional)

mfra-orig

(Optional)

ufrag-consumed

(Optional)

mfrag-consumed

(Optional)

bad-version

(Optional)

rt-lookup-fail

(Optional)

hoplimit-excd

(Optional)

opt-header-error

(Optional)

pld-length-too-small

(Optional)

pm-failed

(Optional)

mbuf-error

(Optional)

could-not-enc

(Optional)

dest-if-down

(Optional)

Command Mode

- /exec

show isis

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ process | protocol ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_process_tag <process-tag-out> <instance_num> <uuid> <process-id> <vrf-name-out> <system-id-out> <is-type-out> <sap-out> <qh-out> <mtu-out> [ <gr-status-out> ] [ <gr-state-active-out> ] [ <gr-state-inactive-out> ] [ <last-gr-status-fail-out> ] [ <last-gr-status-success-out> ] [ <last-gr-status-none-out> ] [ <gr-status-disable-out> ] [ TABLE_afi_safi <af-ix> <af-bfd-config> <af-pib-tag> ] <metric-style> <accept-metric> [ <net-set-none> ] [ TABLE_area_addr <area-addr-nsap> ] [ <proc-state-not-config> ] [ <proc-state-admin-down> ] [ <proc-state-l3vm-down> ] [ <proc-state-unknown-down> ] [ <proc-state-not-specified> ] [ <proc-state-no-net> ] [ <proc-state-no-vrf-id> ] [ <proc-state-out-memory> ] [ <proc-state-restart> ] [ <proc-state-running> ] <vrf-id-out> [ TABLE_te <te-lvl-out> <te-lvl-active> ] [ <te-ted-out> ] [ <mpls-te-out> ] [ TABLE_mpls_te [ <mpls-te-lvl-out> ] [ <mpls-te-rtrid-intf-out> ] [ <mpls-te-fa-lvl-out> ] [ TABLE_te_fa <te-fa-sysid-out> <te-fa-intf-out> ] ] [ <te-stat-sys-id-out> ] [ <te-stat-rtr-id-out> ] [ TABLE_te_stat_lvl <te-stat-lvl-out> <te-stat-up-out> <te-stat-down-out> ] [ TABLE_iib_list_yeild <intf-name-out> ] [ TABLE_auth <auth-lvl-out> [ <auth-type-no-type> ] [ <auth-type-cleartext> ] [ <auth-type-md5> ] [ <auth-type-key-chain> ] [ <auth-type-none> ] [ <auth-check> ] [ <auth-no-check> ] ] [ TABLE_spf <spf-lvl-out> [ <spf-timer> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

process

(Optional) Display IS-IS process information

protocol

(Optional) Display IS-IS process information

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

instance_num

(Optional)

uuid

(Optional)

process-id

(Optional)

vrf-name-out

(Optional)

system-id-out

(Optional)

is-type-out

(Optional)

sap-out

(Optional)

qh-out

(Optional)

mtu-out

(Optional)

gr-status-out

(Optional)

gr-state-active-out

(Optional)

gr-state-inactive-out

(Optional)

last-gr-status-fail-out

(Optional)

last-gr-status-success-out

(Optional)

last-gr-status-none-out

(Optional)

gr-status-disable-out

(Optional)

TABLE_afi_safi

(Optional)

af-ix

(Optional)

af-bfd-config

(Optional)

af-pib-tag

(Optional)

metric-style

(Optional)

accept-metric

(Optional)

net-set-none

(Optional)

TABLE_area_addr

(Optional)

area-addr-nsap

(Optional)

proc-state-not-config

(Optional)

proc-state-admin-down

(Optional)

proc-state-l3vm-down

(Optional)

proc-state-unknown-down

(Optional)

proc-state-not-specified

(Optional)

proc-state-no-net

(Optional)

proc-state-no-vrf-id

(Optional)

proc-state-out-memory

(Optional)

proc-state-restart

(Optional)

proc-state-running

(Optional)

vrf-id-out

(Optional)

TABLE_te

(Optional)

te-lvl-out

(Optional)

te-lvl-active

(Optional)

te-ted-out

(Optional)

mpls-te-out

(Optional)

TABLE_mpls_te

(Optional)

mpls-te-lvl-out

(Optional)

mpls-te-rtrid-intf-out

(Optional)

mpls-te-fa-lvl-out

(Optional)

TABLE_te_fa

(Optional)

te-fa-sysid-out

(Optional)

te-fa-intf-out

(Optional)

te-stat-sys-id-out

(Optional)

te-stat-rtr-id-out

(Optional)

TABLE_te_stat_lvl

(Optional)

te-stat-lvl-out

(Optional)

te-stat-up-out

(Optional)

te-stat-down-out

(Optional)

TABLE_iib_list_yeild

(Optional)

intf-name-out

(Optional)

TABLE_auth

(Optional)

auth-lvl-out

(Optional)

auth-type-no-type

(Optional)

auth-type-cleartext

(Optional)

auth-type-md5

(Optional)

auth-type-key-chain

(Optional)

auth-type-none

(Optional)

auth-check

(Optional)

auth-no-check

(Optional)

TABLE_spf

(Optional)

spf-lvl-out

(Optional)

spf-timer

(Optional)

Command Mode

- /exec

show isis adjacency

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] adjacency [ <interface> [ p2p-level-1-2 ] ] { [ system-id <sid> ] | [ detail ] | [ summary ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> <adj-summary-out> <adj-interface-out> [ <adj-interface-name-out> ] [ { TABLE_process_adj <adj-sys-name-out> <adj-sys-id-out> [ <adj-usage-out> ] [ <adj-level-out> ] <adj-state-out> <adj-hold-time-out> <adj-intf-name-out> <adj-detail-set-out> [ { <adj-transitions-out> <adj-flap-out> [ <adj-flap-time-out> ] <adj-ckt-type-out> <adj-ipv4-addr-out> <adj-ipv6-addr-out> <adj-bcast-out> [ { <adj-ckt-id-out> <adj-lan-prio-out> } ] <adj-bfd-ipv4-establish-out> <adj-bfd-ipv6-establish-out> <adj-resurrect-out> [ { <adj-resurrect-count-out> <adj-resurrect-hwm-out> } ] <adj-restart-capable-out> <adj-restart-ack-out> [ { <adj-restart-mode-out> <adj-restart-adj-seen-ra-out> <adj-restart-adj-seen-csnp-out> <adj-restart-adj-seen-l1-csnp-out> <adj-restart-adj-seen-l2-csnp-out> <adj-restart-suppress-adj-out> } ] } ] } ] [ { TABLE_p2p_adj_sum <adj-summ-p2p-level-out> <adj-summ-p2p-state-out> <adj-summ-p2p-count-out> } ] [ { TABLE_lan_adj_sum <adj-summ-lan-level-out> <adj-summ-lan-state-out> <adj-summ-lan-count-out> } ] } } ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

adjacency

Display IS-IS adjacency information

interface

(Optional) IS-IS interface

system-id

(Optional) Hostname or System ID

sid

(Optional) Hostname or System ID (in the form of XXXX.XXXX.XXXX)

detail

(Optional) Display IS-IS adjacency detail information

p2p-level-1-2

(Optional) Display IS-IS point-to-point information at level-1-2

summary

(Optional) Display IS-IS adjacency summary information

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

adj-summary-out

(Optional)

adj-interface-out

(Optional)

adj-interface-name-out

(Optional)

TABLE_process_adj

(Optional)

adj-sys-name-out

(Optional)

adj-sys-id-out

(Optional)

adj-usage-out

(Optional)

adj-level-out

(Optional)

adj-state-out

(Optional)

adj-hold-time-out

(Optional)

adj-intf-name-out

(Optional)

adj-detail-set-out

(Optional)

adj-transitions-out

(Optional)

adj-flap-out

(Optional)

adj-flap-time-out

(Optional)

adj-ckt-type-out

(Optional)

adj-ipv4-addr-out

(Optional)

adj-ipv6-addr-out

(Optional)

adj-bcast-out

(Optional)

adj-ckt-id-out

(Optional)

adj-lan-prio-out

(Optional)

adj-bfd-ipv4-establish-out

(Optional)

adj-bfd-ipv6-establish-out

(Optional)

adj-resurrect-out

(Optional)

adj-resurrect-count-out

(Optional)

adj-resurrect-hwm-out

(Optional)

adj-restart-capable-out

(Optional)

adj-restart-ack-out

(Optional)

adj-restart-mode-out

(Optional)

adj-restart-adj-seen-ra-out

(Optional)

adj-restart-adj-seen-csnp-out

(Optional)

adj-restart-adj-seen-l1-csnp-out

(Optional)

adj-restart-adj-seen-l2-csnp-out

(Optional)

adj-restart-suppress-adj-out

(Optional)

TABLE_p2p_adj_sum

(Optional)

adj-summ-p2p-level-out

(Optional)

adj-summ-p2p-state-out

(Optional)

adj-summ-p2p-count-out

(Optional)

TABLE_lan_adj_sum

(Optional)

adj-summ-lan-level-out

(Optional)

adj-summ-lan-state-out

(Optional)

adj-summ-lan-count-out

(Optional)

Command Mode

- /exec

show isis csnp

show isis [ <isis-tag> ] csnp [ detail ] [ __readonly__ TABLE_process_tag <process-tag-out> [ { TABLE_CSNPLEVEL <csnp-level> <csnp-cache-valid> <csnp-cache-hit> <cscnp-cache-miss> <csnp-hit-rate> [ { TABLE_CSNPLSPS <csnp-start-lsp-id> <csnp-end-lsp-id> <csnp-entry-valid> <csnp-pdu-lengh> [ { TABLE_CSNPONELSP <csnp-lsp-id> <csnp-lsp-seq-num> <csnp-lsp-chk-sum> <csnp-lsp-life-time> } ] } ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

csnp

Display IS-IS CSNP cache contents

detail

(Optional) Display detailed IS-IS information

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_CSNPLEVEL

(Optional)

csnp-level

(Optional)

csnp-cache-valid

(Optional)

csnp-cache-hit

(Optional)

cscnp-cache-miss

(Optional)

csnp-hit-rate

(Optional)

TABLE_CSNPLSPS

(Optional)

csnp-start-lsp-id

(Optional)

csnp-end-lsp-id

(Optional)

csnp-entry-valid

(Optional)

csnp-pdu-lengh

(Optional)

TABLE_CSNPONELSP

(Optional)

csnp-lsp-id

(Optional)

csnp-lsp-seq-num

(Optional)

csnp-lsp-chk-sum

(Optional)

csnp-lsp-life-time

(Optional)

Command Mode

- /exec

show isis database

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] database [ <level> ] [ detail | advertise | summary ] [ <lid> ] { [ zero-sequence ] | [ ip prefix <ip-prefix> ] | [ ipv6 prefix <ipv6-prefix> ] | [ router-id <rid> ] | [ adjacency <adj-id> ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> [ <dbase-hname-absent-out> ] [ { TABLE_process_lvl <dbase-level-out> [ { TABLE_process_lsp <dbase-lsp-name-out> <dbase-lsp-status-out> <dbase-lsp-absent-out> [ { <dbase-lsp-seqnum-out> <dbase-lsp-cksum-out> [ <dbase-lsp-lifetime-str-out> ] [ <dbase-lsp-lifetime-out> ] <dbase-att-out> <dbase-partition-out> <dbase-overload-out> <dbase-istype-out> } ] [ { <dbase-lsp-instance-out> [ { TABLE_process_tlv <dbase-lsp-tlv-name-out> [ <dbase-lsp-area-addr-out> ] [ <dbase-lsp-is-nbr-name-out> ] [ <dbase-lsp-is-nbr-metric-out> ] [ <dbase-lsp-is-nbr-ext-metric-out> ] [ <dbase-lsp-es-nbr-name-out> ] [ <dbase-lsp-es-nbr-metric-out> ] [ <dbase-lsp-es-nbr-ext-metric-out> ] [ <dbase-lsp-auth-type-out> ] [ <dbase-lsp-auth-len-out> ] [ <dbase-lsp-ext-is-name-out> ] [ <dbase-lsp-ext-is-metric-out> ] [ <dbase-lsp-ip-ri-addr-out> ] [ <dbase-lsp-ip-ri-mask-out> ] [ <dbase-lsp-ip-ri-metric-out> ] [ <dbase-lsp-ip-ri-ext-metric-out> ] [ <dbase-lsp-ip-ri-up-down-out> ] [ { TABLE_process_nlpid <dbase-lsp-prot-support-out> } ] [ <dbase-lsp-ip-addr-out> ] [ <dbase-lsp-ipv6-addr-out> ] [ { TABLE_process_extip <dbase-lsp-extip-addr-out> <dbase-lsp-extip-prefix-len-out> <dbase-lsp-extip-metric-out> <dbase-lsp-extip-up-down-out> } ] [ <dbase-lsp-hname-out> ] [ <dbase-lsp-hname-len-out> ] [ { TABLE_process_extipv6 <dbase-lsp-extipv6-addr-out> <dbase-lsp-extipv6-prefix-len-out> <dbase-lsp-extipv6-metric-out> <dbase-lsp-extipv6-up-down-out> <dbase-lsp-extipv6-ext-origin-out> } ] [ <dbase-lsp-tlv-len-out> ] [ <dbase-lsp-tlv-unknown-out> ] [ { TABLE_process_subtlv <dbase-lsp-subtlv-name-out> [ <dbase-lsp-extis-admin-group-out> ] [ <dbase-lsp-subtlv-ip-addr-out> ] [ <dbase-lsp-extis-bw-out> ] [ <dbase-lsp-extis-pri1-out> ] [ <dbase-lsp-extis-pri1-val-out> ] [ <dbase-lsp-extis-pri2-out> ] [ <dbase-lsp-extis-pri2-val-out> ] [ <dbase-lsp-extis-te-metric-out> ] [ <dbase-lsp-subtlv-len-out> ] [ <dbase-lsp-subtlv-unknown-out> ] } ] } ] <dbase-lsp-digest-out> } ] } ] [ { <dbase-lsp-total-out> [ { <dbase-lsp-empty-out> <dbase-lsp-zeroseq-out> } ] } ] } ] } } ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

database

Display IS-IS database information

level

(Optional) IS-IS level

lid

(Optional) LSP ID in the form of XXXX.XXXX.XXXX.XX-XX

detail

(Optional) Display detailed IS-IS information

advertise

(Optional) Display advertise tlv lsp-memory information

summary

(Optional) Display summary IS-IS information

zero-sequence

(Optional) LSP with zero sequence number

ip

(Optional) IP attribute filter

ipv6

(Optional) IPv6 attribute filter

prefix

(Optional) Prefix filter

ip-prefix

(Optional) Single exact match IP prefix filter

adjacency

(Optional) Adjacency filter

adj-id

(Optional) Single exact match adjacency filter

router-id

(Optional) Router-id filter

rid

(Optional) single exact match router-id filter

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

dbase-hname-absent-out

(Optional)

TABLE_process_lvl

(Optional)

dbase-level-out

(Optional)

TABLE_process_lsp

(Optional)

dbase-lsp-name-out

(Optional)

dbase-lsp-status-out

(Optional)

dbase-lsp-absent-out

(Optional)

dbase-lsp-seqnum-out

(Optional)

dbase-lsp-cksum-out

(Optional)

dbase-lsp-lifetime-str-out

(Optional)

dbase-lsp-lifetime-out

(Optional)

dbase-att-out

(Optional)

dbase-partition-out

(Optional)

dbase-overload-out

(Optional)

dbase-istype-out

(Optional)

dbase-lsp-instance-out

(Optional)

TABLE_process_tlv

(Optional)

dbase-lsp-tlv-name-out

(Optional)

dbase-lsp-area-addr-out

(Optional)

dbase-lsp-is-nbr-name-out

(Optional)

dbase-lsp-is-nbr-metric-out

(Optional)

dbase-lsp-is-nbr-ext-metric-out

(Optional)

dbase-lsp-es-nbr-name-out

(Optional)

dbase-lsp-es-nbr-metric-out

(Optional)

dbase-lsp-es-nbr-ext-metric-out

(Optional)

dbase-lsp-auth-type-out

(Optional)

dbase-lsp-auth-len-out

(Optional)

dbase-lsp-ext-is-name-out

(Optional)

dbase-lsp-ext-is-metric-out

(Optional)

dbase-lsp-ip-ri-addr-out

(Optional)

dbase-lsp-ip-ri-mask-out

(Optional)

dbase-lsp-ip-ri-metric-out

(Optional)

dbase-lsp-ip-ri-ext-metric-out

(Optional)

dbase-lsp-ip-ri-up-down-out

(Optional)

TABLE_process_nlpid

(Optional)

dbase-lsp-prot-support-out

(Optional)

dbase-lsp-ip-addr-out

(Optional)

dbase-lsp-ipv6-addr-out

(Optional)

TABLE_process_extip

(Optional)

dbase-lsp-extip-addr-out

(Optional)

dbase-lsp-extip-prefix-len-out

(Optional)

dbase-lsp-extip-metric-out

(Optional)

dbase-lsp-extip-up-down-out

(Optional)

dbase-lsp-hname-out

(Optional)

dbase-lsp-hname-len-out

(Optional)

TABLE_process_extipv6

(Optional)

dbase-lsp-extipv6-addr-out

(Optional)

dbase-lsp-extipv6-prefix-len-out

(Optional)

dbase-lsp-extipv6-metric-out

(Optional)

dbase-lsp-extipv6-up-down-out

(Optional)

dbase-lsp-extipv6-ext-origin-out

(Optional)

dbase-lsp-tlv-len-out

(Optional)

dbase-lsp-tlv-unknown-out

(Optional)

TABLE_process_subtlv

(Optional)

dbase-lsp-subtlv-name-out

(Optional)

dbase-lsp-extis-admin-group-out

(Optional)

dbase-lsp-subtlv-ip-addr-out

(Optional)

dbase-lsp-extis-bw-out

(Optional)

dbase-lsp-extis-pri1-out

(Optional)

dbase-lsp-extis-pri1-val-out

(Optional)

dbase-lsp-extis-pri2-out

(Optional)

dbase-lsp-extis-pri2-val-out

(Optional)

dbase-lsp-extis-te-metric-out

(Optional)

dbase-lsp-subtlv-len-out

(Optional)

dbase-lsp-subtlv-unknown-out

(Optional)

dbase-lsp-digest-out

(Optional)

dbase-lsp-total-out

(Optional)

dbase-lsp-empty-out

(Optional)

dbase-lsp-zeroseq-out

(Optional)

Command Mode

- /exec

show isis event-history

show isis [ <isis-tag> ] [ internal ] event-history { errors | msgs | <isis-event-hist-buf-name> | statistics }

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

internal

(Optional) Commands for internal use

event-history

Display IS-IS event history

errors

Error history

msgs

Message history

isis-event-hist-buf-name

Event history buffer

statistics

Show the state and size of the buffer

Command Mode

- /exec

show isis hostname

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] { hostname | hostname-table } [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <tag-out> TABLE_vrf <vrf-name-out> <hname-enabled-out> <hname-detail-out> <hname-level-out> <hname-id-out> <hname-id-mine-out> <hname-name-out> ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

hostname

Display IS-IS hostname table information

hostname-table

Display IS-IS hostname table information

detail

(Optional) Display detailed IS-IS information

__readonly__

(Optional)

tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

hname-enabled-out

(Optional)

hname-detail-out

(Optional)

hname-level-out

(Optional)

hname-id-out

(Optional)

hname-id-mine-out

(Optional)

hname-name-out

(Optional)

Command Mode

- /exec

show isis interface

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] interface [ brief | <interface> ] [ level-1 | level-2 ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> [ { TABLE_interface [ { <intfb-name-out> <intfb-type-out> <intfb-ix-out> <intfb-state-out> <intfb-ready-state-out> <intfb-cid-out> <intfb-ckt-type-out> <intfb-mtu-out> [ { <intf-p2p-metric-lvl-1-out> <intf-p2p-metric-lvl-2-out> <intf-p2p-prio-lvl-1-out> <intf-p2p-prio-lvl-2-out> <intf-p2p-adj-count-lvl-1-out> <intf-p2p-adj-up-count-lvl-1-out> <intf-p2p-adj-count-lvl-2-out> <intf-p2p-adj-up-count-lvl-2-out> } ] [ { <intf-loopback-metric-lvl-1-out> <intf-loopback-metric-lvl-2-out> <intf-loopback-prio-lvl-1-out> <intf-loopback-prio-lvl-2-out> <intf-loopback-adj-count-lvl-1-out> <intf-loopback-adj-up-count-lvl-1-out> <intf-loopback-adj-count-lvl-2-out> <intf-loopback-adj-up-count-lvl-2-out> } ] [ { <intf-bcast-metric-lvl-1-out> <intf-bcast-metric-lvl-2-out> <intf-bcast-prio-lvl-1-out> <intf-bcast-prio-lvl-2-out> <intf-bcast-adj-count-lvl-1-out> <intf-bcast-adj-up-count-lvl-1-out> <intf-bcast-adj-count-lvl-2-out> <intf-bcast-adj-up-count-lvl-2-out> } ] } ] [ { <intf-name-out> <intf-status-out> } ] [ { <intf-state-out> <intf-internal-state-out> [ <intf-cib-disabled-out> ] [ <intf-cid-invalid-out> ] } ] [ { TABLE_auth [ { <intf-auth-info-out> [ <intf-auth-kchain-out> ] <intf-auth-chk-info-out> } ] } ] [ { <intf-ix-out> <intf-cid-out> <intf-ckt-type-out> } ] [ { TABLE_bfd [ <intf-bfd-ipv4-state-out> ] [ <intf-bfd-ipv6-state-out> ] } ] [ <intf-passive-mask-out> ] [ <intf-passive-mask-lvl-out> ] [ <intf-mgrp-set-out> ] [ <intf-mgrp-state-out> ] [ <intf-mgrp-id-out> ] [ <intf-p2p-type-out> ] [ { <intf-p2p-ext-local-cid-out> <intf-p2p-cid-out> <intf-retx-intv-out> <intf-retx-throttle-out> } ] [ <intf-loopback-type-out> ] [ { <intf-lsp-intv-out> <intf-mtu-out> [ <intf-hpad-state-out> ] } ] [ { [ <intf-p2p-pad-ts-out> ] <intf-p2p-adj-count-out> <intf-p2p-adj-up-count-out> <intf-p2p-prio-out> <intf-p2p-hello-intv-out> <intf-p2p-hello-multi-out> <intf-p2p-hello-next-out> [ { TABLE_p2p <intf-p2p-lvl-out> <intf-p2p-adj-lvl-out> <intf-p2p-adj-up-lvl-out> <intf-p2p-metric-lvl-out> <intf-p2p-csnp-lvl-out> <intf-p2p-csnp-nxt-lvl-out> <intf-p2p-lspid-last-lvl-out> } ] } ] [ { <intf-bcast-type-out> [ { TABLE_bcast_pad [ { <intf-bcast-lvl-out> <intf-bcast-pad-ts-out> } ] } ] [ { TABLE_bcast_dis [ { <intf-bcast-lvl-dis-out> <intf-bcast-dis-ts-out> } ] } ] [ { TABLE_bcast_pkt <intf-bcast-lvl-info-out> <intf-bcast-lvl-metric-0-out> <intf-bcast-lvl-metric-2-out> <intf-bcast-lvl-csnp-intv-out> <intf-bcast-lvl-csnp-next-out> <intf-bcast-lvl-iih-intv-out> <intf-bcast-lvl-iih-multi-out> <intf-bcast-lvl-iih-next-out> } ] [ { TABLE_bcast_adj <intf-bcast-lvl-value-out> <intf-bcast-lvl-adj-out> <intf-bcast-lvl-adj-up-out> <intf-bcast-lvl-prio-out> <intf-bcast-lvl-cktid-out> <intf-bcast-lvl-cktid-ts-out> } ] } ] [ { TABLE_loopback <intf-loopback-lvl-out> <intf-loopback-lvl-metric-out> } ] [ <intf-unknown-out> ] } ] } } ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

brief

(Optional) Brief display of IS-IS interfaces

interface

Display IS-IS interface information

level-1

(Optional) Display Level-1 interfaces

level-2

(Optional) Display level-2 interfaces

interface

(Optional) IS-IS interface

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_interface

(Optional)

intf-status-out

(Optional)

intf-name-out

(Optional)

intf-ix-out

(Optional)

intf-state-out

(Optional)

intf-cid-out

(Optional)

intf-ckt-type-out

(Optional)

intfb-name-out

(Optional)

intfb-type-out

(Optional)

intfb-ix-out

(Optional)

intfb-state-out

(Optional)

intfb-ready-state-out

(Optional)

intfb-cid-out

(Optional)

intfb-ckt-type-out

(Optional)

intf-p2p-metric-lvl-1-out

(Optional)

intf-p2p-metric-lvl-2-out

(Optional)

intf-p2p-prio-lvl-1-out

(Optional)

intf-p2p-prio-lvl-2-out

(Optional)

intf-p2p-adj-count-lvl-1-out

(Optional)

intf-p2p-adj-count-lvl-2-out

(Optional)

intf-p2p-adj-up-count-lvl-1-out

(Optional)

intf-p2p-adj-up-count-lvl-2-out

(Optional)

intf-loopback-metric-lvl-1-out

(Optional)

intf-loopback-metric-lvl-2-out

(Optional)

intf-loopback-prio-lvl-1-out

(Optional)

intf-loopback-prio-lvl-2-out

(Optional)

intf-loopback-adj-count-lvl-1-out

(Optional)

intf-loopback-adj-count-lvl-2-out

(Optional)

intf-loopback-adj-up-count-lvl-1-out

(Optional)

intf-loopback-adj-up-count-lvl-2-out

(Optional)

intf-bcast-metric-lvl-1-out

(Optional)

intf-bcast-metric-lvl-2-out

(Optional)

intf-bcast-prio-lvl-1-out

(Optional)

intf-bcast-prio-lvl-2-out

(Optional)

intf-bcast-adj-count-lvl-1-out

(Optional)

intf-bcast-adj-count-lvl-2-out

(Optional)

intf-bcast-adj-up-count-lvl-1-out

(Optional)

intf-bcast-adj-up-count-lvl-2-out

(Optional)

intf-internal-state-out

(Optional)

intf-cib-disabled-out

(Optional)

intf-cid-invalid-out

(Optional)

TABLE_auth

(Optional)

intf-auth-info-out

(Optional)

intf-auth-kchain-out

(Optional)

intf-auth-chk-info-out

(Optional)

TABLE_bfd

(Optional)

intf-bfd-ipv4-state-out

(Optional)

intf-bfd-ipv6-state-out

(Optional)

intf-passive-mask-out

(Optional)

intf-passive-mask-lvl-out

(Optional)

intf-mgrp-set-out

(Optional)

intf-mgrp-state-out

(Optional)

intf-mgrp-id-out

(Optional)

intf-p2p-type-out

(Optional)

intf-p2p-ext-local-cid-out

(Optional)

intf-p2p-cid-out

(Optional)

intf-retx-intv-out

(Optional)

intf-retx-throttle-out

(Optional)

intf-loopback-type-out

(Optional)

intf-lsp-intv-out

(Optional)

intf-mtu-out

(Optional)

intfb-mtu-out

(Optional)

intf-hpad-state-out

(Optional)

intf-p2p-pad-ts-out

(Optional)

intf-p2p-adj-count-out

(Optional)

intf-p2p-adj-up-count-out

(Optional)

intf-p2p-prio-out

(Optional)

intf-p2p-hello-intv-out

(Optional)

intf-p2p-hello-multi-out

(Optional)

intf-p2p-hello-next-out

(Optional)

TABLE_p2p

(Optional)

intf-p2p-lvl-out

(Optional)

intf-p2p-adj-lvl-out

(Optional)

intf-p2p-adj-up-lvl-out

(Optional)

intf-p2p-metric-lvl-out

(Optional)

intf-p2p-csnp-lvl-out

(Optional)

intf-p2p-csnp-nxt-lvl-out

(Optional)

intf-p2p-lspid-last-lvl-out

(Optional)

intf-bcast-type-out

(Optional)

TABLE_bcast_pad

(Optional)

intf-bcast-lvl-out

(Optional)

intf-bcast-pad-ts-out

(Optional)

TABLE_bcast_dis

(Optional)

intf-bcast-lvl-dis-out

(Optional)

intf-bcast-dis-ts-out

(Optional)

TABLE_bcast_pkt

(Optional)

intf-bcast-lvl-info-out

(Optional)

intf-bcast-lvl-metric-0-out

(Optional)

intf-bcast-lvl-metric-2-out

(Optional)

intf-bcast-lvl-csnp-intv-out

(Optional)

intf-bcast-lvl-csnp-next-out

(Optional)

intf-bcast-lvl-iih-intv-out

(Optional)

intf-bcast-lvl-iih-multi-out

(Optional)

intf-bcast-lvl-iih-next-out

(Optional)

TABLE_bcast_adj

(Optional)

intf-bcast-lvl-value-out

(Optional)

intf-bcast-lvl-adj-out

(Optional)

intf-bcast-lvl-adj-up-out

(Optional)

intf-bcast-lvl-prio-out

(Optional)

intf-bcast-lvl-cktid-out

(Optional)

intf-bcast-lvl-cktid-ts-out

(Optional)

TABLE_loopback

(Optional)

intf-loopback-lvl-out

(Optional)

intf-loopback-lvl-metric-out

(Optional)

intf-unknown-out

(Optional)

Command Mode

- /exec

show isis internal dpi

show isis [ <isis-tag> ] internal dpi

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

internal

Commands for internal use

dpi

Show various logs of Deep Packet Inspection

Command Mode

- /exec

show isis internal library-info

show isis [ <isis-tag> ] internal library-info

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

internal

Commands for internal use

library-info

Show various event logs of library

Command Mode

- /exec

show isis internal mem-stats

show isis [ <isis-tag> ] internal mem-stats [ no-libs ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

internal

Commands for internal use

mem-stats

Show memory allocation statistics

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

Command Mode

- /exec

show isis internal mtr

show isis [ <isis-tag> ] internal mtr

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

internal

Commands for internal use

mtr

Show various logs of Multi Topology routing

Command Mode

- /exec

show isis internal packet queue counters

show isis [ <isis-tag> ] internal packet queue counters

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

internal

Commands for internal use

packet

Show packet counters

queue

Show packet queue counters

counters

Show packet queue statistics

Command Mode

- /exec

show isis internal pss

show isis [ <isis-tag> ] internal pss { vrf | interface | adjacency | database [ detail ] | traffic-eng { database | link } }

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

internal

Commands for internal use

pss

Display IS-IS persistent-pool storage data

vrf

VRF information

interface

Interface data

adjacency

Adjacency data

database

Database data

detail

(Optional) Display detailed IS-IS information

traffic-eng

Traffic-Eng data

database

Traffic-Eng database data

link

Traffic-Eng link data

Command Mode

- /exec

show isis ipv6 redistribute route

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] ipv6 redistribute route [ summary | <ipv6-addr> | <ipv6-prefix> [ longer-prefixes [ summary ] ] ] [ direct-mask ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_process_tag <process-tag-out> <redist-route-ipv6-vrf> [ <redist-route-ipv6-af-ix> ] [ { TABLE_one_route <redist-route-ipv6-prefix> [ <redist-route-ipv6-mask-len> ] [ <redist-route-ipv6-pib-name> ] [ <redist-route-ipv6-direct-mask> ] [ <redist-route-ipv6-route-type> ] [ { TABLE_redist <redist-route-ipv6-status> <redist-route-ipv6-level> [ <redist-route-ipv6-metric> ] [ <redist-route-ipv6-sum-addr-prefix> ] [ <redist-route-ipv6-sum-addr-mask-len> ] } ] } ] [ <redist-route-ipv6-summary-addr-prefix> ] [ <redist-route-ipv6-summary-addr-mask-len> ] [ <redist-route-ipv6-summary-route-total> ] [ { TABLE_protocol <redist-route-ipv6-summary-pib-name> [ <redist-route-ipv6-summary-prot-route-total> ] } ] [ <redist-route-ipv6-summary-pending-total> ] [ { TABLE_mask_len <redist-route-ipv6-summary-mask-len-ix> [ <redist-route-ipv6-summary-mask-len> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

redistribute

Display IS-IS redistribute information

route

Display ISIS redistribute route

ipv6

Display IS-IS IPv6 information

longer-prefixes

(Optional) Display exact match and more specific routes

summary

(Optional) Display route counts

direct-mask

(Optional) Display routes with direct-mask set

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

redist-route-ipv6-vrf

(Optional)

redist-route-ipv6-af-ix

(Optional)

TABLE_one_route

(Optional)

redist-route-ipv6-prefix

(Optional)

redist-route-ipv6-mask-len

(Optional)

redist-route-ipv6-pib-name

(Optional)

redist-route-ipv6-direct-mask

(Optional)

redist-route-ipv6-route-type

(Optional)

TABLE_redist

(Optional)

redist-route-ipv6-status

(Optional)

redist-route-ipv6-level

(Optional)

redist-route-ipv6-metric

(Optional)

redist-route-ipv6-sum-addr-prefix

(Optional)

redist-route-ipv6-sum-addr-mask-len

(Optional)

redist-route-ipv6-summary-addr-prefix

(Optional)

redist-route-ipv6-summary-addr-mask-len

(Optional)

redist-route-ipv6-summary-route-total

(Optional)

TABLE_protocol

(Optional)

redist-route-ipv6-summary-pib-name

(Optional)

redist-route-ipv6-summary-prot-route-total

(Optional)

redist-route-ipv6-summary-pending-total

(Optional)

TABLE_mask_len

(Optional)

redist-route-ipv6-summary-mask-len-ix

(Optional)

redist-route-ipv6-summary-mask-len

(Optional)

Command Mode

- /exec

show isis ipv6 route-map statistics

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] ipv6 route-map statistics { { redistribute { static | direct | amt | bgp <as> | { <src-isis> | eigrp | ospfv3 | rip } <tag> } } | { distribute <src-level> into <dst-level> } } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_process_tag [ <process-tag-out> ] [ <route-map-stat-vrf> ] [ { TABLE_process_route_map [ <name> ] [ <action> ] [ <seq> ] [ { TABLE_cmd [ <str> ] [ <compare-count> ] [ <match-count> ] } ] <accept-count> <reject-count> } ] ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ipv6

Display IS-IS IPv6 information

route-map

Display IS-IS route-map information

statistics

Display IS-IS route-map statistics

redistribute

Redistribute information from another routing protocol

static

Static routes

direct

Directly connected

amt

AMT anycast prefix

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

eigrp

Enhanced Interior Gateway Protocol

src-isis

IS-IS Routing for IPv6

ospfv3

Open Shortest Path First (OSPF) V3

rip

RIP for IPv6 (RIPNG)

tag

Process tag

distribute

Distribute routes between ISIS levels

into

from level-n into level-m

src-level

Route-distribution between levels

dst-level

Route-distribution between levels

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

route-map-stat-vrf

(Optional)

TABLE_process_route_map

(Optional) Routemap table

name

(Optional) Route-map Name

action

(Optional) Route-map action

seq

(Optional) Sequence number of the rule in route-map

TABLE_cmd

(Optional) Route-map command table

str

(Optional) Route-map command

compare-count

(Optional) Number of comparisons

match-count

(Optional) Number of matches

accept-count

(Optional) Total number of packets accepted by the policy

reject-count

(Optional) Total number of pakcets rejected by the policy

Command Mode

- /exec

show isis ipv6 route

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] ipv6 route [ topology { [ base ] | mt-ipv6 } ] [ summary | detail | <ipv6-addr> [ detail ] | <ipv6-prefix> [ detail | longer-prefixes [ summary | detail ] ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> <afi-safi-out> [ TABLE_prefix [ <route-prefix-out> <route-mask-len-out> <route-level-out> ] [ <route-summ-discard-addr-out> <route-summ-discard-mask-len-out> ] [ <route-discard-addr-out> <route-discard-mask-len-out> ] [ <route-addr-print-out> <route-mask-len-print-out> <route-direct-print-out> ] [ TABLE_direct_path [ <route-direct-out> <route-direct-via-out> <route-direct-if-name-out> <route-direct-metric-out> <route-direct-level-out> ] [ <route-direct-instance-out> ] ] [ TABLE_best_path [ <route-no-def-prefix-out> ] [ <route-def-prefix-out> ] <route-addr-valid-out> <route-marker-out> <route-ifname-out> <route-metric-out> <route-pref-out> [ <route-instance-out> ] ] [ <route-discard-mask-out> ] [ [ <route-sum-prefix-out> <route-sum-prefix-len-out> ] <route-total-out> <route-paths-total-out> <route-paths-best-out> <route-paths-backup-out> [ TABLE_sum_best_route <route-sum-lvl-out> <route-sum-total-out> [ <route-sum-direct-out> ] [ <route-sum-normal-out> ] [ <route-sum-missing-out> ] ] [ <route-best-pend-num-out> ] <route-bestpaths-out> [ TABLE_sum_best_path <route-path-sum-lvl-out> <route-path-sum-total-out> [ <route-path-sum-direct-out> ] [ <route-path-sum-normal-out> ] ] <route-backuppaths-out> [ TABLE_sum_backup_path <backup-path-sum-lvl-out> <backup-path-sum-total-out> [ <backup-path-sum-direct-out> ] [ <backup-path-sum-normal-out> ] ] <route-bestroutes-per-mask-out> [ TABLE_best_mask <route-best-mask-val-out> <route-best-mask-count-out> ] [ <route-pend-q-count-out> ] ] ] } } ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ipv6

Display IS-IS IPv6 information

route

Display IS-IS route information

topology

(Optional) Display routes for a topology

base

(Optional) Display routes for BASE topology

mt-ipv6

(Optional) Display routes for MT-IPV6-UNICAST topology

longer-prefixes

(Optional) Display exact match and more specific routes

summary

(Optional) Display route counts

detail

(Optional) Display detail route information

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

afi-safi-out

(Optional)

TABLE_prefix

(Optional)

route-prefix-out

(Optional)

route-mask-len-out

(Optional)

route-level-out

(Optional)

route-summ-discard-addr-out

(Optional)

route-summ-discard-mask-len-out

(Optional)

route-discard-addr-out

(Optional)

route-discard-mask-len-out

(Optional)

route-addr-print-out

(Optional)

route-mask-len-print-out

(Optional)

route-direct-print-out

(Optional)

TABLE_direct_path

(Optional)

route-direct-out

(Optional)

route-direct-via-out

(Optional)

route-direct-if-name-out

(Optional)

route-direct-metric-out

(Optional)

route-direct-level-out

(Optional)

route-direct-instance-out

(Optional)

TABLE_best_path

(Optional)

route-no-def-prefix-out

(Optional)

route-def-prefix-out

(Optional)

route-addr-valid-out

(Optional)

route-marker-out

(Optional)

route-ifname-out

(Optional)

route-metric-out

(Optional)

route-pref-out

(Optional)

route-instance-out

(Optional)

route-discard-mask-out

(Optional)

route-sum-prefix-out

(Optional)

route-sum-prefix-len-out

(Optional)

route-total-out

(Optional)

route-paths-total-out

(Optional)

route-paths-best-out

(Optional)

route-paths-backup-out

(Optional)

TABLE_sum_best_route

(Optional)

route-sum-lvl-out

(Optional)

route-sum-total-out

(Optional)

route-sum-direct-out

(Optional)

route-sum-normal-out

(Optional)

route-sum-missing-out

(Optional)

route-best-pend-num-out

(Optional)

route-bestpaths-out

(Optional)

TABLE_sum_best_path

(Optional)

route-path-sum-lvl-out

(Optional)

route-path-sum-total-out

(Optional)

route-path-sum-direct-out

(Optional)

route-path-sum-normal-out

(Optional)

route-backuppaths-out

(Optional)

TABLE_sum_backup_path

(Optional)

backup-path-sum-lvl-out

(Optional)

backup-path-sum-total-out

(Optional)

backup-path-sum-direct-out

(Optional)

backup-path-sum-normal-out

(Optional)

route-bestroutes-per-mask-out

(Optional)

TABLE_best_mask

(Optional)

route-best-mask-val-out

(Optional)

route-best-mask-count-out

(Optional)

route-pend-q-count-out

(Optional)

Command Mode

- /exec

show isis lsp free-list

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] { non-pseudonode | pseudonode { <interface> | orphan } } lsp free-list [ summary ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

non-pseudonode

Display IS-IS non-pseudo-node information

pseudonode

Display IS-IS pseudo-node information

interface

IS-IS interface

orphan

Display orphan LSP information

lsp

Display IS-IS LSP information

free-list

Display free-list information

summary

(Optional) Display LSP count per free-list

Command Mode

- /exec

show isis mesh-group

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] mesh-group [ <mesh-id> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <tag-out> TABLE_vrf <vrf-name-out> <mesh-id-set-out> <mesh-id-out> <mesh-set-id-out> <mesh-id-intf-name-out> <mesh-id-none-out> ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

mesh-group

Display IS-IS mesh-groups

mesh-id

(Optional) Display a single mesh-group

__readonly__

(Optional)

tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

mesh-id-set-out

(Optional)

mesh-id-out

(Optional)

mesh-set-id-out

(Optional)

mesh-id-intf-name-out

(Optional)

mesh-id-none-out

(Optional)

Command Mode

- /exec

show isis non tlv overflow-list

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] { non-pseudonode | pseudonode <interface> } tlv overflow-list [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

non-pseudonode

Display IS-IS non-pseudo-node information

pseudonode

Display IS-IS pseudo-node information

interface

IS-IS interface

tlv

Display IS-IS TLV information

overflow-list

Display ISIS TLV overflow-list information

Command Mode

- /exec

show isis redistribute route

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ ip ] redistribute route [ summary | <ip-addr> | <ip-prefix> [ longer-prefixes [ summary ] ] ] [ direct-mask ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_process_tag <process-tag-out> <redist-route-vrf> [ <redist-route-af-ix> ] [ { TABLE_one_route <redist-route-prefix> [ <redist-route-mask-len> ] [ <redist-route-pib-name> ] [ <redist-route-direct-mask> ] [ <redist-route-route-type> ] [ { TABLE_redist <redist-route-status> <redist-route-level> [ <redist-route-metric> ] [ <redist-route-sum-addr-prefix> ] [ <redist-route-sum-addr-mask-len> ] } ] } ] [ <redist-route-summary-addr-prefix> ] [ <redist-route-summary-addr-mask-len> ] [ <redist-route-summary-route-total> ] [ { TABLE_protocol <redist-route-summary-pib-name> [ <redist-route-summary-prot-route-total> ] } ] [ <redist-route-summary-pending-total> ] [ { TABLE_mask_len <redist-route-summary-mask-len-ix> [ <redist-route-summary-mask-len> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

redistribute

Display IS-IS redistribute information

route

Display ISIS redistribute route

ip

(Optional) Display IS-IS IPv4 information

ip-addr

(Optional) Display single IP redistribute route

ip-prefix

(Optional) Display single exact match IP redistribute route

longer-prefixes

(Optional) Display exact match and more specific routes

summary

(Optional) Display route counts

direct-mask

(Optional) Display routes with direct-mask set

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

redist-route-vrf

(Optional)

redist-route-af-ix

(Optional)

TABLE_one_route

(Optional)

redist-route-prefix

(Optional)

redist-route-mask-len

(Optional)

redist-route-pib-name

(Optional)

redist-route-direct-mask

(Optional)

redist-route-route-type

(Optional)

TABLE_redist

(Optional)

redist-route-status

(Optional)

redist-route-level

(Optional)

redist-route-metric

(Optional)

redist-route-sum-addr-prefix

(Optional)

redist-route-sum-addr-mask-len

(Optional)

redist-route-summary-addr-prefix

(Optional)

redist-route-summary-addr-mask-len

(Optional)

redist-route-summary-route-total

(Optional)

TABLE_protocol

(Optional)

redist-route-summary-pib-name

(Optional)

redist-route-summary-prot-route-total

(Optional)

redist-route-summary-pending-total

(Optional)

TABLE_mask_len

(Optional)

redist-route-summary-mask-len-ix

(Optional)

redist-route-summary-mask-len

(Optional)

Command Mode

- /exec

show isis route-map statistics

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ ip ] route-map statistics { { redistribute { static | direct | amt | bgp <as> | { <src-isis> | eigrp | ospf | rip } <tag> } } | { distribute <src-level> into <dst-level> } } [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <route-map-stat-vrf> [ { TABLE_process_route_map [ <name> ] [ <action> ] [ <seq> ] [ { TABLE_cmd [ <str> ] [ <compare-count> ] [ <match-count> ] } ] <accept-count> <reject-count> } ] } } ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ip

(Optional) Display IS-IS IPv4 information

route-map

Display IS-IS route-map information

statistics

Display IS-IS route-map statistics

redistribute

Redistribute information from another routing protocol

static

Static routes

direct

Directly connected

amt

AMT anycast prefix

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

eigrp

Enhanced Interior Gateway Protocol

src-isis

IS-IS Routing for IPv4

ospf

Open Shortest Path First (OSPF)

rip

RIP for IPv4

tag

Process tag

distribute

Distribute routes between ISIS levels

into

from level-n into level-m

src-level

Route-distribution between levels

dst-level

Route-distribution between levels

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

route-map-stat-vrf

(Optional)

TABLE_process_route_map

(Optional) Routemap table

name

(Optional) Route-map Name

action

(Optional) Route-map action

seq

(Optional) Sequence number of the rule in route-map

TABLE_cmd

(Optional) Route-map command table

str

(Optional) Route-map command

compare-count

(Optional) Number of comparisons

match-count

(Optional) Number of matches

accept-count

(Optional) Total number of packets accepted by the policy

reject-count

(Optional) Total number of pakcets rejected by the policy

Command Mode

- /exec

show isis route

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ ip ] route [ summary | detail | <ip-addr> [ detail ] | <ip-prefix> [ detail | longer-prefixes [ summary | detail ] ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> <afi-safi-out> [ TABLE_prefix [ <route-prefix-out> <route-mask-len-out> <route-level-out> ] [ <route-summ-discard-addr-out> <route-summ-discard-mask-len-out> ] [ <route-discard-addr-out> <route-discard-mask-len-out> ] [ <route-addr-print-out> <route-mask-len-print-out> <route-direct-print-out> ] [ TABLE_direct_path [ <route-direct-out> <route-direct-via-out> <route-direct-if-name-out> <route-direct-metric-out> <route-direct-level-out> ] [ <route-direct-instance-out> ] ] [ TABLE_best_path [ <route-no-def-prefix-out> ] [ <route-def-prefix-out> ] <route-addr-valid-out> <route-marker-out> <route-ifname-out> <route-metric-out> <route-pref-out> [ <route-instance-out> ] ] [ <route-discard-mask-out> ] [ [ <route-sum-prefix-out> <route-sum-prefix-len-out> ] <route-total-out> <route-paths-total-out> <route-paths-best-out> <route-paths-backup-out> [ TABLE_sum_best_route <route-sum-lvl-out> <route-sum-total-out> [ <route-sum-direct-out> ] [ <route-sum-normal-out> ] [ <route-sum-missing-out> ] ] [ <route-best-pend-num-out> ] <route-bestpaths-out> [ TABLE_sum_best_path <route-path-sum-lvl-out> <route-path-sum-total-out> [ <route-path-sum-direct-out> ] [ <route-path-sum-normal-out> ] ] <route-backuppaths-out> [ TABLE_sum_backup_path <backup-path-sum-lvl-out> <backup-path-sum-total-out> [ <backup-path-sum-direct-out> ] [ <backup-path-sum-normal-out> ] ] <route-bestroutes-per-mask-out> [ TABLE_best_mask <route-best-mask-val-out> <route-best-mask-count-out> ] [ <route-pend-q-count-out> ] ] ] } } ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ip

(Optional) Display IS-IS IPv4 information

route

Display IS-IS route information

ip-addr

(Optional) Display single IP route

ip-prefix

(Optional) Display single exact match IP route

longer-prefixes

(Optional) Display exact match and more specific routes

summary

(Optional) Display route counts

detail

(Optional) Display detail route information

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

afi-safi-out

(Optional)

TABLE_prefix

(Optional)

route-prefix-out

(Optional)

route-mask-len-out

(Optional)

route-level-out

(Optional)

route-summ-discard-addr-out

(Optional)

route-summ-discard-mask-len-out

(Optional)

route-discard-addr-out

(Optional)

route-discard-mask-len-out

(Optional)

route-addr-print-out

(Optional)

route-mask-len-print-out

(Optional)

route-direct-print-out

(Optional)

TABLE_direct_path

(Optional)

route-direct-out

(Optional)

route-direct-via-out

(Optional)

route-direct-if-name-out

(Optional)

route-direct-metric-out

(Optional)

route-direct-level-out

(Optional)

route-direct-instance-out

(Optional)

TABLE_best_path

(Optional)

route-no-def-prefix-out

(Optional)

route-def-prefix-out

(Optional)

route-addr-valid-out

(Optional)

route-marker-out

(Optional)

route-ifname-out

(Optional)

route-metric-out

(Optional)

route-pref-out

(Optional)

route-instance-out

(Optional)

route-discard-mask-out

(Optional)

route-sum-prefix-out

(Optional)

route-sum-prefix-len-out

(Optional)

route-total-out

(Optional)

route-paths-total-out

(Optional)

route-paths-best-out

(Optional)

route-paths-backup-out

(Optional)

TABLE_sum_best_route

(Optional)

route-sum-lvl-out

(Optional)

route-sum-total-out

(Optional)

route-sum-direct-out

(Optional)

route-sum-normal-out

(Optional)

route-sum-missing-out

(Optional)

route-best-pend-num-out

(Optional)

route-bestpaths-out

(Optional)

TABLE_sum_best_path

(Optional)

route-path-sum-lvl-out

(Optional)

route-path-sum-total-out

(Optional)

route-path-sum-direct-out

(Optional)

route-path-sum-normal-out

(Optional)

route-backuppaths-out

(Optional)

TABLE_sum_backup_path

(Optional)

backup-path-sum-lvl-out

(Optional)

backup-path-sum-total-out

(Optional)

backup-path-sum-direct-out

(Optional)

backup-path-sum-normal-out

(Optional)

route-bestroutes-per-mask-out

(Optional)

TABLE_best_mask

(Optional)

route-best-mask-val-out

(Optional)

route-best-mask-count-out

(Optional)

route-pend-q-count-out

(Optional)

Command Mode

- /exec

show isis route is

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] route is [ topology { [ base ] | mt-ipv6 } ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

route

Display IS-IS route information

is

Display IS route

topology

(Optional) Display routes for a topology

base

(Optional) Display routes for BASE topology

mt-ipv6

(Optional) Display routes for MT-IPV6-UNICAST topology

Command Mode

- /exec

show isis rrm

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] rrm <interface> [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> <rrm-if-name> [ { TABLE_rrm <rrm-level> <rrm-retx-interval> <rrm-retx-throttle-interval> <rrm-retx-queue-length> <rrm-next-retx> <rrm-retx-queue-hwm> <rrm-retx-queue-exceed> <rrm-dbase-hdr> [ <rrm-timestamp> ] [ <rrm-lsp-retx-instance> ] [ <rrm-lsp-db-instance> ] [ <rrm-rrm-set> ] [ <rrm-srm-set> ] } ] } ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

rrm

Display IS-IS Retransmit-Routing-Message information

interface

IS-IS interface

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

rrm-if-name

(Optional)

TABLE_rrm

(Optional)

rrm-level

(Optional)

rrm-retx-interval

(Optional)

rrm-retx-throttle-interval

(Optional)

rrm-retx-queue-length

(Optional)

rrm-next-retx

(Optional)

rrm-retx-queue-hwm

(Optional)

rrm-retx-queue-exceed

(Optional)

rrm-dbase-hdr

(Optional)

rrm-timestamp

(Optional)

rrm-lsp-retx-instance

(Optional)

rrm-lsp-db-instance

(Optional)

rrm-rrm-set

(Optional)

rrm-srm-set

(Optional)

Command Mode

- /exec

show isis spf-adjacency

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] spf-adjacency [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_process_tag <process-tag-out> <spf-adjacency-vrf> [ <spf-adjacency-system-name> ] [ <spf-adjacency-refcount> ] [ <spf-adjacency-if-name> ] [ <spf-adjacency-rib-addr> ] [ <spf-adjacency-rib-addr-valid> ] [ <spf-adjacency-rib-ipv6-addr> ] [ <spf-adjacency-rib-ipv6-addr-valid> ] [ <spf-adjacency-spf-addr> ] [ <spf-adjacency-spf-ipv6-addr> ] [ { TABLE_SPFADJLEVEL <spf-adjacency-level> } ] ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

spf-adjacency

Display IS-IS SPF adjacency information

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

spf-adjacency-vrf

(Optional)

spf-adjacency-system-name

(Optional)

spf-adjacency-refcount

(Optional)

spf-adjacency-if-name

(Optional)

spf-adjacency-rib-addr

(Optional)

spf-adjacency-rib-addr-valid

(Optional)

spf-adjacency-rib-ipv6-addr

(Optional)

spf-adjacency-rib-ipv6-addr-valid

(Optional)

spf-adjacency-spf-addr

(Optional)

spf-adjacency-spf-ipv6-addr

(Optional)

TABLE_SPFADJLEVEL

(Optional)

spf-adjacency-level

(Optional)

Command Mode

- /exec

show isis spf-log

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] spf-log [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <tag-out> TABLE_vrf <vrf-name-out> <spflog-calc-out> <spflog-size-out> <spflog-maxsize-out> <spflog-ago-time-out> <spflog-lvl-out> <spflog-reason-out> <spflog-count-out> <spflog-elapsed-ts-out> <spflog-log-num-out> <spflog-ts-detail-out> <spflog-date-detail-out> <spflog-lvl-detail-out> <spflog-instance-detail-out> <spflog-init-ts-detail-out> <spflog-spf-ts-detail-out> <spflog-detail-ts-is-out> <spflog-detail-ts-urib-out> <spflog-detail-ts-elapsed-out> <spflog-detail-lvl-out> <spflog-detail-spf-cnt-out> <spflog-detail-sync-cnt-out> <spflog-detail-spf-reason-out> ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

spf-log

Display IS-IS SPF information

detail

(Optional) Display detail ISIS SPF information

__readonly__

(Optional)

tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

spflog-calc-out

(Optional)

spflog-size-out

(Optional)

spflog-maxsize-out

(Optional)

spflog-ago-time-out

(Optional)

spflog-lvl-out

(Optional)

spflog-reason-out

(Optional)

spflog-count-out

(Optional)

spflog-elapsed-ts-out

(Optional)

spflog-log-num-out

(Optional)

spflog-ts-detail-out

(Optional)

spflog-date-detail-out

(Optional)

spflog-lvl-detail-out

(Optional)

spflog-instance-detail-out

(Optional)

spflog-init-ts-detail-out

(Optional)

spflog-spf-ts-detail-out

(Optional)

spflog-detail-ts-is-out

(Optional)

spflog-detail-ts-urib-out

(Optional)

spflog-detail-ts-elapsed-out

(Optional)

spflog-detail-lvl-out

(Optional)

spflog-detail-spf-cnt-out

(Optional)

spflog-detail-sync-cnt-out

(Optional)

spflog-detail-spf-reason-out

(Optional)

Command Mode

- /exec

show isis srm

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] srm <interface> [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> <srm-if-name> [ { TABLE_srm <srm-level> <srm-if-eligible> <srm-if-not-on-srm-list> <srm-lsp-interval> <srm-next-lsp> <srm-dbase-hdr> } ] } ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

srm

Display IS-IS Send-Routing-Message information

interface

IS-IS interface

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

srm-if-name

(Optional)

TABLE_srm

(Optional)

srm-level

(Optional)

srm-if-eligible

(Optional)

srm-if-not-on-srm-list

(Optional)

srm-lsp-interval

(Optional)

srm-next-lsp

(Optional)

srm-dbase-hdr

(Optional)

Command Mode

- /exec

show isis ssn

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] ssn <interface> [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> <snn-if-name> [ { TABLE_ssn <snn-level> <snn-psnp-eligible> <snn-next-psnp> <snn-dbase_hdr> } ] } ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ssn

Display IS-IS Send-Sequence-Number information

interface

IS-IS interface

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

snn-if-name

(Optional)

TABLE_ssn

(Optional)

snn-level

(Optional)

snn-psnp-eligible

(Optional)

snn-next-psnp

(Optional)

snn-dbase_hdr

(Optional)

Command Mode

- /exec

show isis statistics

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] statistics [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <tag-out> TABLE_vrf <vrf-name-out> <stat-if-out> <stat-if-name-out> <stat-spf-calc-out> <stat-lsp-sourced-out> <stat-lsp-refresh-out> <stat-lsp-purge-out> <stat-dis-elections-out> ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

statistics

Display IS-IS protocol statistics

interface

(Optional) IS-IS interface

__readonly__

(Optional)

tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

stat-if-out

(Optional)

stat-if-name-out

(Optional)

stat-spf-calc-out

(Optional)

stat-lsp-sourced-out

(Optional)

stat-lsp-refresh-out

(Optional)

stat-lsp-purge-out

(Optional)

stat-dis-elections-out

(Optional)

Command Mode

- /exec

show isis summary-address show isis ipv6 summary-address

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ ip ] summary-address [ <ip-addr> | <ip-prefix> [ longer-prefixes ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] | show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] ipv6 summary-address [ <ipv6-addr> | <ipv6-prefix> [ longer-prefixes ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <tag-out> TABLE_vrf <vrf-name-out> <afi-safi-out> <addr-absent-out> <addr-prefix-out> <addr-mask-len-out> <addr-level-out> <addr-num-out> <addr-lvl-out> <addr-metric-absent-out> <addr-metric-out> <addr-route-count-out> ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ip

(Optional) Display IS-IS IPv4 information

ipv6

Display IS-IS IPv6 information

summary-address

Display IS-IS summary address

ip-addr

(Optional) Display single IP summary address

ip-prefix

(Optional) Display single exact match IP summary address

longer-prefixes

(Optional) Display exact match and more specific summary address

isis-tag

(Optional)

__readonly__

(Optional)

tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

afi-safi-out

(Optional)

addr-absent-out

(Optional)

addr-prefix-out

(Optional)

addr-mask-len-out

(Optional)

addr-level-out

(Optional)

addr-num-out

(Optional)

addr-lvl-out

(Optional)

addr-metric-absent-out

(Optional)

addr-metric-out

(Optional)

addr-route-count-out

(Optional)

Command Mode

- /exec

show isis topology

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] topology [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_process_tag <process-tag-out> <topology-vrf> [ { TABLE_LEVEL <topology-level> [ { TABLE_ONE_ROUTE <topology-one-route-node-name> [ <topology-one-route-spf-instance> ] [ <topology-one-route-on-path> ] [ <topology-one-route-mt-id> ] [ { TABLE_ONE_ROUTE_NH <topology-one-route-nh-system-name> [ <topology-one-route-nh-if-name> ] [ <topology-one-route-nh-metric> ] } ] [ { TABLE_ONE_ROUTE_MBEST <topology-one-route-mbest-system-name> [ <topology-one-route-mbest-if-name> ] [ <topology-one-route-mbest-metric> ] } ] } ] [ <topology-default-spf-instance> ] [ { TABLE_NH <topology-nh-system-name> [ <topology-nh-if-name> ] [ <topology-nh-metric> ] } ] [ { TABLE_MBEST <topology-mbest-system-name> [ <topology-mbest-if-name> ] [ <topology-mbest-metric> ] } ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

topology

Display IS-IS Topology information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

topology-vrf

(Optional)

TABLE_LEVEL

(Optional)

topology-level

(Optional)

TABLE_ONE_ROUTE

(Optional)

topology-one-route-node-name

(Optional)

topology-one-route-spf-instance

(Optional)

topology-one-route-on-path

(Optional)

topology-one-route-mt-id

(Optional)

TABLE_ONE_ROUTE_NH

(Optional)

topology-one-route-nh-system-name

(Optional)

topology-one-route-nh-if-name

(Optional)

topology-one-route-nh-metric

(Optional)

TABLE_ONE_ROUTE_MBEST

(Optional)

topology-one-route-mbest-system-name

(Optional)

topology-one-route-mbest-if-name

(Optional)

topology-one-route-mbest-metric

(Optional)

topology-default-spf-instance

(Optional)

TABLE_NH

(Optional)

topology-nh-system-name

(Optional)

topology-nh-if-name

(Optional)

topology-nh-metric

(Optional)

TABLE_MBEST

(Optional)

topology-mbest-system-name

(Optional)

topology-mbest-if-name

(Optional)

topology-mbest-metric

(Optional)

Command Mode

- /exec

show isis traffic

show isis [ <isis-tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] traffic [ <interface> ] [ mbuf-priority ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> <traffic-if-out> [ <traffic-if-name-out> ] <traffic-lan-iih-out> <traffic-lan-iih-rcv-out> <traffic-lan-iih-xmit-out> <traffic-lan-iih-rcv-auth-err-out> <traffic-lan-iih-rcv-err-out> <traffic-p2p-iih-out> <traffic-p2p-iih-rcv-out> <traffic-p2p-iih-xmit-out> <traffic-p2p-iih-rcv-auth-err-out> <traffic-p2p-iih-rcv-err-out> <traffic-csnp-out> <traffic-csnp-rcv-out> <traffic-csnp-xmit-out> <traffic-csnp-rcv-auth-err-out> <traffic-csnp-rcv-err-out> <traffic-psnp-out> <traffic-psnp-rcv-out> <traffic-psnp-xmit-out> <traffic-psnp-rcv-auth-err-out> <traffic-psnp-rcv-err-out> <traffic-lsp-out> <traffic-lsp-rcv-out> <traffic-lsp-flood-out> <traffic-lsp-rcv-auth-err-out> <traffic-lsp-rcv-err-out> <traffic-lsp-rexmit-out> [ <traffic-xmit-err-out> ] [ <traffic-unknown-pdu-rcv-out> ] } } ]

Syntax Description

Syntax Description

show

Show running system information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

traffic

Display IS-IS traffic information

interface

(Optional) IS-IS interface

mbuf-priority

(Optional) Display mbuf priorities for received PDUs

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

traffic-if-out

(Optional)

traffic-if-name-out

(Optional)

traffic-lan-iih-out

(Optional)

traffic-lan-iih-rcv-out

(Optional)

traffic-lan-iih-xmit-out

(Optional)

traffic-lan-iih-rcv-auth-err-out

(Optional)

traffic-lan-iih-rcv-err-out

(Optional)

traffic-p2p-iih-out

(Optional)

traffic-p2p-iih-rcv-out

(Optional)

traffic-p2p-iih-xmit-out

(Optional)

traffic-p2p-iih-rcv-auth-err-out

(Optional)

traffic-p2p-iih-rcv-err-out

(Optional)

traffic-csnp-out

(Optional)

traffic-csnp-rcv-out

(Optional)

traffic-csnp-xmit-out

(Optional)

traffic-csnp-rcv-auth-err-out

(Optional)

traffic-csnp-rcv-err-out

(Optional)

traffic-psnp-out

(Optional)

traffic-psnp-rcv-out

(Optional)

traffic-psnp-xmit-out

(Optional)

traffic-psnp-rcv-auth-err-out

(Optional)

traffic-psnp-rcv-err-out

(Optional)

traffic-lsp-out

(Optional)

traffic-lsp-rcv-out

(Optional)

traffic-lsp-flood-out

(Optional)

traffic-lsp-rcv-auth-err-out

(Optional)

traffic-lsp-rcv-err-out

(Optional)

traffic-lsp-rexmit-out

(Optional)

traffic-xmit-err-out

(Optional)

traffic-unknown-pdu-rcv-out

(Optional)

Command Mode

- /exec

show itd

show itd <svc-name> [ brief ] [ __readonly__ <is_firstentry> <is_detail> <is_active> <is_firstentry_routemap> <is_firstentry_acl> <is_lastentry> [ TABLE_summary <service_name> <probe> <lb_scheme> [ <interface> ] <state> <buckets> [ <reason> ] <vrf_name> <userACL> [ TABLE_device <device_grp> ] [ TABLE_route_map [ <route_map> ] [ <interface> ] [ <r_status> ] [ <int_track_id> ] ] [ TABLE_vip [ <vip_ip> ] [ <vip_probe> ] [ <vip_port> ] [ TABLE_vip_node [ <vip_node> ] [ <vip_nodev6> ] <vip_config> <vip_weight> <vip_status> <vip_track_id> <vip_ip_sla_id> [ TABLE_vip_acl [ <vip_access_list> ] ] ] ] [ TABLE_node [ <node> ] [ <nodev6> ] <config> <weight> <status> <track_id> <ip_sla_id> [ TABLE_acl [ <access_list> ] ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

itd

ITD service

svc-name

ITD service name

brief

(Optional) brief

__readonly__

(Optional) Read Only

is_firstentry

(Optional)

is_detail

(Optional)

is_active

(Optional)

is_firstentry_routemap

(Optional)

is_firstentry_acl

(Optional)

is_lastentry

(Optional)

TABLE_summary

(Optional)

service_name

(Optional) service_name

probe

(Optional) probe

lb_scheme

(Optional) lb scheme

interface

(Optional) interface

state

(Optional) state

buckets

(Optional) buckets

reason

(Optional) inactive reason

vrf_name

(Optional) VRF-Name

userACL

(Optional) user access-list

TABLE_device

(Optional)

device_grp

(Optional) service device group

TABLE_route_map

(Optional)

route_map

(Optional) service route map

interface

(Optional) interface

r_status

(Optional) route map status

int_track_id

(Optional) interface track id

TABLE_vip

(Optional)

vip_ip

(Optional) vip ip

vip_probe

(Optional) vip protocol

vip_port

(Optional) vip port

TABLE_vip_node

(Optional)

vip_node

(Optional) service node ip

vip_nodev6

(Optional) service node IPv6

vip_config

(Optional) node config

vip_weight

(Optional) node weight

vip_status

(Optional) node status

vip_track_id

(Optional) node track id

vip_ip_sla_id

(Optional) node ip sla id

TABLE_vip_acl

(Optional)

vip_access_list

(Optional) access list

TABLE_node

(Optional)

node

(Optional) service node ip

nodev6

(Optional) service node IPv6

config

(Optional) node config

weight

(Optional) node weight

status

(Optional) node status

track_id

(Optional) node track id

ip_sla_id

(Optional) node ip sla id

TABLE_acl

(Optional)

access_list

(Optional) access list

Command Mode

- /exec

show itd

show itd [ brief ] [ __readonly__ <is_firstentry> <is_detail> <is_active> <is_firstentry_routemap> <is_firstentry_acl> <is_lastentry> [ TABLE_summary <service_name> <probe> <lb_scheme> [ <interface> ] <state> <buckets> [ <reason> ] <vrf_name> <userACL> [ TABLE_device <device_grp> ] [ TABLE_route_map [ <route_map> ] [ <interface> ] [ <r_status> ] [ <int_track_id> ] ] [ TABLE_vip [ <vip_ip> ] [ <vip_probe> ] [ <vip_port> ] [ TABLE_vip_node [ <vip_node> ] [ <vip_nodev6> ] <vip_config> <vip_weight> <vip_status> <vip_track_id> <vip_ip_sla_id> [ TABLE_vip_acl [ <vip_access_list> ] ] ] ] [ TABLE_node [ <node> ] [ <nodev6> ] <config> <weight> <status> <track_id> <ip_sla_id> [ TABLE_acl [ <access_list> ] ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

itd

ITD service

brief

(Optional) brief

__readonly__

(Optional) Read Only

is_firstentry

(Optional)

is_detail

(Optional)

is_active

(Optional)

is_firstentry_routemap

(Optional)

is_firstentry_acl

(Optional)

is_lastentry

(Optional)

TABLE_summary

(Optional)

service_name

(Optional) service_name

probe

(Optional) probe

lb_scheme

(Optional) lb scheme

interface

(Optional) interface

state

(Optional) state

buckets

(Optional) buckets

reason

(Optional) inactive reason

vrf_name

(Optional) VRF-Name

userACL

(Optional) user access-list

TABLE_device

(Optional)

device_grp

(Optional) service device group

TABLE_route_map

(Optional)

route_map

(Optional) service route map

interface

(Optional) interface

r_status

(Optional) route map status

int_track_id

(Optional) interface track id

TABLE_vip

(Optional)

vip_ip

(Optional) vip ip

vip_probe

(Optional) vip protocol

vip_port

(Optional) vip port

TABLE_vip_node

(Optional)

vip_node

(Optional) service node ip

vip_nodev6

(Optional) service node IPv6

vip_config

(Optional) node config

vip_weight

(Optional) node weight

vip_status

(Optional) node status

vip_track_id

(Optional) node track id

vip_ip_sla_id

(Optional) node ip sla id

TABLE_vip_acl

(Optional)

vip_access_list

(Optional) access list

TABLE_node

(Optional)

node

(Optional) service node ip

nodev6

(Optional) service node IPv6

config

(Optional) node config

weight

(Optional) node weight

status

(Optional) node status

track_id

(Optional) node track id

ip_sla_id

(Optional) node ip sla id

TABLE_acl

(Optional)

access_list

(Optional) access list

Command Mode

- /exec

show itd

show itd <svc-name> [ brief ] [ __readonly__ <is_firstentry> <is_detail> <is_active> <is_firstentry_routemap> <is_firstentry_standby> <is_firstentry_acl> <is_lastentry> [ TABLE_summary <service_name> <probe> <lb_scheme> [ <interface> ] <state> <buckets> [ <reason> ] <vrf_name> <userACL> <peer_status> [ TABLE_device <device_grp> <dg_probe> <dg_probe_port> ] [ TABLE_route_map [ <route_map> ] [ <interface> ] [ <r_status> ] [ <int_track_id> ] ] [ TABLE_vip [ <vip_ip> ] [ <vip_probe> ] [ <vip_port> ] [ <vip_dgname> ] [ <ace_name> ] [ <ace_seq> ] [ <ace_ip> ] [ <ace_protocol> ] [ <ace_port> ] [ TABLE_vip_node [ <vip_node> ] [ <vip_nodev6> ] <vip_config> <vip_weight> <vip_node_probe> <vip_node_probe_port> <vip_node_probe_ip> <vip_status> <vip_track_id> <vip_ip_sla_id> [ TABLE_vip_standby [ <vip_standby_ip> ] [ <vip_standby_ipv6> ] <vip_standby_config> <vip_standby_weight> <vip_standby_probe> <vip_standby_probe_port> <vip_standby_probe_ip> <vip_standby_status> <vip_standby_track_id> <vip_standby_sla_id> ] [ TABLE_vip_acl [ <vip_access_list> ] ] ] ] [ TABLE_node [ <node> ] [ <nodev6> ] <config> <weight> <node_probe> <node_probe_port> <node_probe_ip> <status> <track_id> <ip_sla_id> [ TABLE_standby [ <standby_ip> ] [ <standby_ipv6> ] <standby_config> <standby_weight> <standby_probe> <standby_probe_port> <standby_probe_ip> <standby_status> <standby_track_id> <standby_sla_id> ] [ TABLE_acl [ <access_list> ] ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

itd

ITD service

svc-name

ITD service name

brief

(Optional) brief

__readonly__

(Optional) Read Only

is_firstentry

(Optional)

is_detail

(Optional)

is_active

(Optional)

is_firstentry_routemap

(Optional)

is_firstentry_acl

(Optional)

is_lastentry

(Optional)

is_firstentry_standby

(Optional)

TABLE_summary

(Optional)

service_name

(Optional) service_name

probe

(Optional) probe

lb_scheme

(Optional) lb scheme

interface

(Optional) interface

state

(Optional) state

buckets

(Optional) buckets

reason

(Optional) inactive reason

vrf_name

(Optional) VRF-Name

userACL

(Optional) user access-list

peer_status

(Optional) peer status

TABLE_device

(Optional)

device_grp

(Optional) service device group

dg_probe

(Optional) probe type

dg_probe_port

(Optional) probe port

TABLE_route_map

(Optional)

route_map

(Optional) service route map

interface

(Optional) interface

r_status

(Optional) route map status

int_track_id

(Optional) interface track id

TABLE_vip

(Optional)

vip_ip

(Optional) vip ip

vip_probe

(Optional) vip protocol

vip_port

(Optional) vip port

vip_dgname

(Optional) vip device group

ace_name

(Optional) ace information

ace_seq

(Optional) ace information

ace_ip

(Optional) ace information

ace_protocol

(Optional) ace information

ace_port

(Optional) ace information

TABLE_vip_node

(Optional)

vip_node

(Optional) service node ip

vip_nodev6

(Optional) service node IPv6

vip_config

(Optional) node config

vip_weight

(Optional) node weight

vip_status

(Optional) node status

vip_node_probe

(Optional) node probe type

vip_node_probe_port

(Optional) node probe port

vip_node_probe_ip

(Optional) node probe ip

vip_track_id

(Optional) node track id

vip_ip_sla_id

(Optional) node ip sla id

TABLE_vip_standby

(Optional)

vip_standby_ip

(Optional) standby node ip

vip_standby_ipv6

(Optional) standby node ipv6

vip_standby_config

(Optional) standby node config

vip_standby_weight

(Optional) standby node weight

vip_standby_status

(Optional) standby node status

vip_standby_probe

(Optional) standby node probe type

vip_standby_probe_port

(Optional) standby node probe port

vip_standby_probe_ip

(Optional) standby node probe ip

vip_standby_track_id

(Optional) standby node track id

vip_standby_sla_id

(Optional) standby node sla id

TABLE_vip_acl

(Optional)

vip_access_list

(Optional) access list

TABLE_node

(Optional)

node

(Optional) service node ip

nodev6

(Optional) service node IPv6

config

(Optional) node config

weight

(Optional) node weight

status

(Optional) node status

node_probe

(Optional) node probe type

node_probe_port

(Optional) node probe port

node_probe_ip

(Optional) node probe ip

track_id

(Optional) node track id

ip_sla_id

(Optional) node ip sla id

TABLE_standby

(Optional)

standby_ip

(Optional) standby node ip

standby_ipv6

(Optional) standby node ipv6

standby_config

(Optional) standby node config

standby_weight

(Optional) standby node weight

standby_status

(Optional) standby node status

standby_probe

(Optional) standby node probe type

standby_probe_port

(Optional) standby node probe port

standby_probe_ip

(Optional) standby node probe ip

standby_track_id

(Optional) standby node track id

standby_sla_id

(Optional) standby node sla id

TABLE_acl

(Optional)

access_list

(Optional) access list

Command Mode

- /exec

show itd

show itd [ brief ] [ __readonly__ <is_firstentry> <is_detail> <is_active> <is_firstentry_routemap> <is_firstentry_standby> <is_firstentry_acl> <is_lastentry> [ TABLE_summary <service_name> <probe> <lb_scheme> [ <interface> ] <state> <buckets> [ <reason> ] <vrf_name> <userACL> <peer_status> [ TABLE_device <device_grp> <dg_probe> <dg_probe_port> ] [ TABLE_route_map [ <route_map> ] [ <interface> ] [ <r_status> ] [ <int_track_id> ] ] [ TABLE_vip [ <vip_ip> ] [ <vip_probe> ] [ <vip_port> ] [ <vip_dgname> ] [ TABLE_vip_node [ <vip_node> ] [ <vip_nodev6> ] <vip_config> <vip_weight> <vip_node_probe> <vip_node_probe_port> <vip_node_probe_ip> <vip_status> <vip_track_id> <vip_ip_sla_id> [ TABLE_vip_standby [ <vip_standby_ip> ] [ <vip_standby_ipv6> ] <vip_standby_config> <vip_standby_weight> <vip_standby_probe> <vip_standby_probe_port> <vip_standby_probe_ip> <vip_standby_status> <vip_standby_track_id> <vip_standby_sla_id> ] [ TABLE_vip_acl [ <vip_access_list> ] ] ] ] [ TABLE_node [ <node> ] [ <nodev6> ] <config> <weight> <node_probe> <node_probe_port> <node_probe_ip> <status> <track_id> <ip_sla_id> [ TABLE_standby [ <standby_ip> ] [ <standby_ipv6> ] <standby_config> <standby_weight> <standby_probe> <standby_probe_port> <standby_probe_ip> <standby_status> <standby_track_id> <standby_sla_id> ] [ TABLE_acl [ <access_list> ] ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

itd

ITD service

brief

(Optional) brief

__readonly__

(Optional) Read Only

is_firstentry

(Optional)

is_detail

(Optional)

is_active

(Optional)

is_firstentry_routemap

(Optional)

is_firstentry_acl

(Optional)

is_lastentry

(Optional)

is_firstentry_standby

(Optional)

TABLE_summary

(Optional)

service_name

(Optional) service_name

probe

(Optional) probe

lb_scheme

(Optional) lb scheme

interface

(Optional) interface

state

(Optional) state

buckets

(Optional) buckets

reason

(Optional) inactive reason

vrf_name

(Optional) VRF-Name

userACL

(Optional) user access-list

peer_status

(Optional) peer status

TABLE_device

(Optional)

device_grp

(Optional) service device group

dg_probe

(Optional) device-group probe type

dg_probe_port

(Optional) device-group probe port

TABLE_route_map

(Optional)

route_map

(Optional) service route map

interface

(Optional) interface

r_status

(Optional) route map status

int_track_id

(Optional) interface track id

TABLE_vip

(Optional)

vip_ip

(Optional) vip ip

vip_probe

(Optional) vip protocol

vip_port

(Optional) vip port

vip_dgname

(Optional) vip device group

TABLE_vip_node

(Optional)

vip_node

(Optional) service node ip

vip_nodev6

(Optional) service node IPv6

vip_config

(Optional) node config

vip_weight

(Optional) node weight

vip_status

(Optional) node status

vip_node_probe

(Optional) node probe type

vip_node_probe_port

(Optional) node probe port

vip_node_probe_ip

(Optional) node probe ip

vip_track_id

(Optional) node track id

vip_ip_sla_id

(Optional) node ip sla id

TABLE_vip_standby

(Optional)

vip_standby_ip

(Optional) standby node ip

vip_standby_ipv6

(Optional) standby node ipv6

vip_standby_config

(Optional) standby node config

vip_standby_weight

(Optional) standby node weight

vip_standby_status

(Optional) standby node status

vip_standby_probe

(Optional) standby node probe type

vip_standby_probe_port

(Optional) standby node probe port

vip_standby_probe_ip

(Optional) standby node probe ip

vip_standby_track_id

(Optional) standby node track id

vip_standby_sla_id

(Optional) standby node sla id

TABLE_vip_acl

(Optional)

vip_access_list

(Optional) access list

TABLE_node

(Optional)

node

(Optional) service node ip

nodev6

(Optional) service node IPv6

config

(Optional) node config

weight

(Optional) node weight

status

(Optional) node status

node_probe

(Optional) node probe type

node_probe_port

(Optional) node probe port

node_probe_ip

(Optional) node probe ip

track_id

(Optional) node track id

ip_sla_id

(Optional) node ip sla id

TABLE_standby

(Optional)

standby_ip

(Optional) standby node ip

standby_ipv6

(Optional) standby node ipv6

standby_config

(Optional) standby node config

standby_weight

(Optional) standby node weight

standby_status

(Optional) standby node status

standby_probe

(Optional) standby node probe type

standby_probe_port

(Optional) standby node probe port

standby_probe_ip

(Optional) standby node probe ip

standby_track_id

(Optional) standby node track id

standby_sla_id

(Optional) standby node sla id

TABLE_acl

(Optional)

access_list

(Optional) access list

Command Mode

- /exec

show itd session device-group

show itd session device-group [ <name> ] [ __readonly__ <first_entry> [ TABLE_svc <node> ] ]

Syntax Description

Syntax Description

show

Show running system information

itd

ITD service

session

ITD service session

device-group

ITD service session device-group

name

(Optional) ITD Service session name

__readonly__

(Optional) Read Only

first_entry

(Optional)

TABLE_svc

(Optional)

node

(Optional) node

Command Mode

- /exec

show itd statistics

show itd { <service_name> | all } [ src { <src-ip> | <src-IPv6> } | dst { <dst-ip> | <dst-IPv6> } ] statistics [ brief ] [ __readonly__ <is_firstentry_node> <is_firstentry_acl> [ TABLE_nice <service_name> [ <vip> ] [ <vip_pkt> ] <dev_grp> <node> <node_pkt> [ <acl> ] [ <acl_pkt> ] <mode> <percentage> ] ]

Syntax Description

Syntax Description

show

Show running system information

itd

ITD service

statistics

ITD statistics

brief

(Optional) brief

__readonly__

(Optional) Read Only

is_firstentry_node

(Optional)

is_firstentry_acl

(Optional)

TABLE_nice

(Optional)

service_name

service_name

all

All ITD services

src

(Optional) Statistics for src ip

src-ip

(Optional) Provide statistics for src ip

dst

(Optional) Statistics for dst ip

dst-ip

(Optional) Provide statistics for dst ip

vip

(Optional) service virtual ip

vip_pkt

(Optional) virtual ip pkt_count

dev_grp

(Optional) device group

node

(Optional) service node ip

node_pkt

(Optional) node pkt count

acl

(Optional) access list

acl_pkt

(Optional) acl pkt count

mode

(Optional) Redirect mode

percentage

(Optional) Packet percentage

Command Mode

- /exec

show itd statistics

show itd { <service_name> | all } [ src { <src-ip> | <src-IPv6> } | dst { <dst-ip> | <dst-IPv6> } ] statistics [ brief ] [ __readonly__ <is_firstentry_node> <is_firstentry_acl> <is_for_ace> [ TABLE_nice <service_name> [ <vip> ] [ <ace_seq> ] [ <ace_ip> ] [ <vip_pkt> ] <dev_grp> <node> <node_pkt> [ <acl> ] [ <acl_pkt> ] <mode> <percentage> ] ]

Syntax Description

Syntax Description

show

Show running system information

itd

ITD service

statistics

ITD statistics

brief

(Optional) brief

__readonly__

(Optional) Read Only

is_firstentry_node

(Optional)

is_firstentry_acl

(Optional)

is_for_ace

(Optional)

TABLE_nice

(Optional)

service_name

service_name

all

All ITD services

src

(Optional) Statistics for src ip

src-ip

(Optional) Provide statistics for src ip

dst

(Optional) Statistics for dst ip

dst-ip

(Optional) Provide statistics for dst ip

vip

(Optional) service virtual ip

ace_seq

(Optional) service ACE name and sequence number

ace_ip

(Optional) service ACE ip/mask/prefix

vip_pkt

(Optional) virtual ip pkt_count

dev_grp

(Optional) device group

node

(Optional) service node ip

node_pkt

(Optional) node pkt count

acl

(Optional) access list

acl_pkt

(Optional) acl pkt count

mode

(Optional) Redirect mode

percentage

(Optional) Packet percentage

Command Mode

- /exec

show itd vrf

show itd vrf [ <name> ] [ __readonly__ <first_entry> [ TABLE_svc <service_name> <vrf_name> <vrf_id> ] ]

Syntax Description

Syntax Description

show

Show running system information

itd

ITD service

vrf

ITD service vrf

name

(Optional) ITD Service VRF name

__readonly__

(Optional) Read Only

first_entry

(Optional)

TABLE_svc

(Optional)

service_name

(Optional) itd service name

vrf_name

(Optional) vrf name

vrf_id

(Optional) vrf id

Command Mode

- /exec

show itd vrf

show itd vrf [ <name> ] [ __readonly__ <first_entry> [ TABLE_svc <service_name> <vrf_name> <vrf_id> ] ]

Syntax Description

Syntax Description

show

Show running system information

itd

ITD service

vrf

ITD service vrf

name

(Optional) ITD Service VRF name

__readonly__

(Optional) Read Only

first_entry

(Optional)

TABLE_svc

(Optional)

service_name

(Optional) itd service name

vrf_name

(Optional) vrf name

vrf_id

(Optional) vrf id

Command Mode

- /exec

Chapter 11. K Show Commands

- show key chain

- show key chain mode decrypt

- show keystore

- show kim inconsistency

- show kim internal event-history cli

- show kim internal event-history errors

- show kim internal event-history events

- show kim internal event-history intf

- show kim internal event-history msgs

- show kim internal event-history mts

- show kim internal event-history packets

- show kim internal event-history pss

- show kim internal event-history vrf

- show kim internal info

- show kim internal mem-stats

- show kubernetes containers

show key chain

{ show key chain [ <keychain> ] } [ __readonly__ TABLE_keychain <chain_name> TABLE_key <key_id> <key_string> <crypto_algo> <accept_utc_zone> <accept_start> <accept_end> <accept_valid> <send_utc_zone> <send_start> <send_end> <send_valid> ]

Syntax Description

Syntax Description

show

Show running system information

key

Display Key Information

chain

Display Keychain Information

keychain

(Optional) Keychain name

__readonly__

(Optional)

TABLE_keychain

(Optional)

TABLE_key

(Optional)

chain_name

(Optional)

key_id

(Optional)

key_string

(Optional)

crypto_algo

(Optional)

accept_utc_zone

(Optional)

accept_start

(Optional)

accept_end

(Optional)

accept_valid

(Optional)

send_utc_zone

(Optional)

send_start

(Optional)

send_end

(Optional)

send_valid

(Optional)

Command Mode

- /exec

show key chain mode decrypt

{ show key chain [ <keychain> ] mode decrypt } [ __readonly__ TABLE_keychain_decrypt <chain_name> TABLE_key <key_id> <key_string> <crypto_algo> <accept_utc_zone> <accept_start> <accept_end> <accept_valid> <send_utc_zone> <send_start> <send_end> <send_valid> ]

Syntax Description

Syntax Description

show

Show running system information

key

Display Key Information

chain

Display Keychain Information

keychain

(Optional) Keychain name

mode

Mode of display

decrypt

Display Decrypted Keystrings

__readonly__

(Optional)

TABLE_keychain_decrypt

(Optional)

TABLE_key

(Optional)

chain_name

(Optional)

key_id

(Optional)

key_string

(Optional)

crypto_algo

(Optional)

accept_utc_zone

(Optional)

accept_start

(Optional)

accept_end

(Optional)

accept_valid

(Optional)

send_utc_zone

(Optional)

send_start

(Optional)

send_end

(Optional)

send_valid

(Optional)

Command Mode

- /exec

show keystore

show keystore [ __readonly__ { TABLE_sksd_state_entries <index> <handle> } <keystore_type> <keystore_ver> <fw_panics> <fw_resets> <rx_fifo_underruns> <rx_timeouts> <rx_bad_checksums> <rx_bad_fragment_lengths> <keystore_corruption> ]

Syntax Description

Syntax Description

keystore

keystore stats

__readonly__

(Optional)

TABLE_sksd_state_entries

(Optional) Displays handles of the keys stored

index

(Optional) Index value

handle

(Optional) Handle Name

keystore_type

(Optional) Type of storage h/w or s/w

keystore_ver

(Optional) Version

fw_panics

(Optional) Number of panics

fw_resets

(Optional) Number of Resets

rx_fifo_underruns

(Optional) Rx FIFO Underruns

rx_timeouts

(Optional) Number of Rx timeouts

rx_bad_checksums

(Optional) Number of Bad Checsums

rx_bad_fragment_lengths

(Optional) Bad fragment lenghts received

keystore_corruption

(Optional) Number of corruptions detected

Command Mode

- /exec

show kim inconsistency

show kim inconsistency

Syntax Description

Syntax Description

show

Show running system information

kim

Display KIM information

inconsistency

KIM inconsistency

Command Mode

- /exec

show kim internal event-history cli

show kim internal event-history cli

Syntax Description

Syntax Description

show

Show running system information

kim

Display KIM information

internal

KIM Internal State

event-history

Show various event logs of KIM

cli

CLI event debugging

Command Mode

- /exec

show kim internal event-history errors

show kim internal event-history errors

Syntax Description

Syntax Description

show

Show running system information

kim

Display KIM information

internal

KIM Internal State

event-history

Show various event logs of KIM

errors

Error messages

Command Mode

- /exec

show kim internal event-history events

show kim internal event-history events

Syntax Description

Syntax Description

show

Show running system information

kim

Display KIM information

internal

KIM Internal State

event-history

Show various event logs of KIM

events

Trace Event debugs

Command Mode

- /exec

show kim internal event-history intf

show kim internal event-history intf

Syntax Description

Syntax Description

show

Show running system information

kim

Display KIM information

internal

KIM Internal State

event-history

Show various event logs of KIM

intf

Interface debugs

Command Mode

- /exec

show kim internal event-history msgs

show kim internal event-history msgs

Syntax Description

Syntax Description

show

Show running system information

kim

Display KIM information

internal

KIM Internal State

event-history

Show various event logs of KIM

msgs

Messages debugging

Command Mode

- /exec

show kim internal event-history mts

show kim internal event-history mts

Syntax Description

Syntax Description

show

Show running system information

kim

Display KIM information

internal

KIM Internal State

event-history

Show various event logs of KIM

mts

MTS debugs

Command Mode

- /exec

show kim internal event-history packets

show kim internal event-history packets

Syntax Description

Syntax Description

show

Show running system information

kim

Display KIM information

internal

KIM Internal State

event-history

Show various event logs of KIM

packets

Packets

Command Mode

- /exec

show kim internal event-history pss

show kim internal event-history pss

Syntax Description

Syntax Description

show

Show running system information

kim

Display KIM information

internal

KIM Internal State

event-history

Show various event logs of KIM

pss

PSS debugs

Command Mode

- /exec

show kim internal event-history vrf

show kim internal event-history vrf

Syntax Description

Syntax Description

show

Show running system information

kim

Display KIM information

internal

KIM Internal State

event-history

Show various event logs of KIM

vrf

VRF debugs

Command Mode

- /exec

show kim internal info

show kim internal info [ lpss | namespace ]

Syntax Description

Syntax Description

show

Show running system information

kim

Display KIM information

internal

KIM Internal State

info

KIM info

lpss

(Optional) KIM lpss info

namespace

(Optional) KIM namespace info

Command Mode

- /exec

show kim internal mem-stats

show kim internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

kim

Display KIM information

internal

KIM Internal State

mem-stats

Show memory allocation statistics

detail

(Optional) Display detailed information

Command Mode

- /exec

show kubernetes containers

show kubernetes containers [ brief | interface <if_name> ]

Syntax Description

Syntax Description

show

Show running system information

kubernetes

Show kubernetes

containers

containers

brief

(Optional) Show brief information

interface

(Optional) Interface name

if_name

(Optional) Physical interface

Command Mode

- /exec

Chapter 12. L Show Commands

- show l2fwder l2rib info

- show l2fwder rmac

- show l2fwder statistics

- show l2rib clients

- show l2rib internal client-stats

- show l2rib internal mem-stats

- show l2rib internal pss

- show l2rib internal state

- show l2rib internal stats

- show l2rib internal txlist

- show l2rib internal unfreeze-list

- show l2rib producers

- show l2rib registrations

- show l2route evpn ead all

- show l2route evpn ethernet-segment esi

- show l2route evpn fl all

- show l2route evpn fl evi

- show l2route evpn imet all

- show l2route evpn imet evi

- show l2route evpn mac-ip all

- show l2route evpn mac-ip evi

- show l2route evpn mac all

- show l2route evpn mac evi

- show l2route evpn path-list all

- show l2route evpn startup-route all

- show l2route evpn startup-route evi

- show l2route fl topology

- show l2route peerid

- show l2route summary

- show l2route topology

- show l2route topology

- show l2route topology

- show lacp counters

- show lacp interface

- show lacp internal debug

- show lacp internal debug buffer

- show lacp internal event-history errors

- show lacp internal event-history global

- show lacp internal event-history interface

- show lacp internal event-history lock

- show lacp internal event-history msgs

- show lacp internal info

- show lacp internal info interface

- show lacp internal mem-stats

- show lacp internal mib

- show lacp issu-impact

- show lacp neighbor

- show lacp port-channel

- show lacp system-identifier

- show ldap-search-map

- show ldap-server

- show ldap-server groups

- show ldap-server statistics

- show license

- show license brief

- show license file

- show license host-id

- show license reserved

- show license usage

- show line

- show line console

- show line console connected

- show line console user-input-string

- show lisp ddt

- show lisp ddt queue

- show lisp ddt referral-cache

- show lisp dynamic-eid

- show lisp elp

- show lisp internal event-history

- show lisp internal info

- show lisp internal ip multicast routes

- show lisp internal library-info

- show lisp internal mem-stats

- show lisp internal pss dyn-eid-source

- show lisp internal pss map-cache

- show lisp internal pss site

- show lisp internal ufdm-pending ip

- show lisp negative-prefix

- show lisp proxy-itr

- show lisp site

- show lisp site instance-id

- show lisp smr

- show lisp stats-cache

- show lldp all

- show lldp dcbx interface

- show lldp entry

- show lldp interface

- show lldp neighbors

- show lldp neighbors detail

- show lldp neighbors system-detail

- show lldp portid-subtype

- show lldp timers

- show lldp tlv-select

- show lldp traffic

- show lldp traffic interface

- show locator-led status

- show logging

- show logging console

- show logging info

- show logging internal info

- show logging last

- show logging level

- show logging level aaa

- show logging level aclmgr

- show logging level adbm

- show logging level adjmgr

- show logging level amt

- show logging level arp

- show logging level ascii-cfg

- show logging level bfd

- show logging level bgp

- show logging level bloggerd

- show logging level bootvar

- show logging level callhome

- show logging level capability

- show logging level catena

- show logging level cdp

- show logging level cert-enroll

- show logging level cert_enroll

- show logging level cfs

- show logging level clis

- show logging level clk_mgr

- show logging level confcheck

- show logging level copp

- show logging level core

- show logging level cts

- show logging level dhcp_snoop

- show logging level diagnostic device_test

- show logging level diagnostic diagclient

- show logging level diagnostic diagmgr

- show logging level dot1x

- show logging level ecp

- show logging level eigrp

- show logging level eltm

- show logging level ethdstats

- show logging level ethpm

- show logging level evb

- show logging level evmc

- show logging level evmed

- show logging level evms

- show logging level fabric forwarding

- show logging level feature-mgr

- show logging level fs-daemon

- show logging level glbp

- show logging level gpixm

- show logging level hsrp

- show logging level icam

- show logging level im

- show logging level imp

- show logging level interface-vlan

- show logging level ip igmp

- show logging level ip msdp

- show logging level ip pim

- show logging level ip sla responder

- show logging level ip sla sender

- show logging level ipconf

- show logging level ipfib

- show logging level ipqos

- show logging level ipv6 icmp

- show logging level iscm

- show logging level iscm

- show logging level isis

- show logging level keystore

- show logging level l2fm

- show logging level l3vm

- show logging level lacp

- show logging level ldap

- show logging level license

- show logging level lim

- show logging level lisp

- show logging level lldp

- show logging level mmode

- show logging level module

- show logging level monitor

- show logging level mpls ldp

- show logging level mpls manager

- show logging level mpls switching

- show logging level mpls traffic-eng

- show logging level mvsh

- show logging level nat

- show logging level nbm

- show logging level netstack

- show logging level nfm

- show logging level ngoam

- show logging level ntp

- show logging level nve

- show logging level nxsdk

- show logging level onep

- show logging level openflow

- show logging level ospf

- show logging level ospfv3

- show logging level otv

- show logging level otv isis

- show logging level pfstat

- show logging level pim

- show logging level pixm

- show logging level pktmgr

- show logging level platform

- show logging level plbm

- show logging level plcmgr

- show logging level pltfm_config

- show logging level plugin

- show logging level poap

- show logging level port-profile

- show logging level port-security

- show logging level private-vlan

- show logging level ptp

- show logging level radius

- show logging level res_mgr

- show logging level rip

- show logging level rpm

- show logging level rsvp

- show logging level scheduler

- show logging level security

- show logging level session-mgr

- show logging level sflow

- show logging level smartc

- show logging level smm

- show logging level snmpd

- show logging level snmpmib_proc

- show logging level spanning-tree

- show logging level stripcl

- show logging level sysmgr

- show logging level tacacs

- show logging level telemetry

- show logging level track

- show logging level tunnel

- show logging level u6rib

- show logging level udld

- show logging level urib

- show logging level vdc_mgr

- show logging level virtual-service

- show logging level vmm

- show logging level vmtracker

- show logging level vpc

- show logging level vrrp-cfg

- show logging level vrrp-eng

- show logging level vrrpv3

- show logging level vshd

- show logging level xbar

- show logging logfile

- show logging logfile duration

- show logging logfile last-index

- show logging logfile start-seqn

- show logging logfile start-time

- show logging loopback

- show logging module

- show logging monitor

- show logging nvram

- show logging onboard

- show logging onboard

- show logging onboard kernel-trace

- show logging origin-id

- show logging pending-diff

- show logging pending

- show logging server

- show logging session status

- show logging source-interface

- show logging status

- show logging timestamp

- show login on-failure log

- show login on-successful log

show l2fwder l2rib info

show l2fwder l2rib info

Syntax Description

Syntax Description

show

Show running system information

l2fwder

L2 software forwarding

l2rib

L2RIB

info

stats and info

Command Mode

- /exec

show l2fwder rmac

show l2fwder rmac <mac-address>

Syntax Description

Syntax Description

show

Show running system information

l2fwder

Display L2FWDER forwarding information

rmac

router mac

mac-address

MAC address

Command Mode

- /exec

show l2fwder statistics

show l2fwder statistics

Syntax Description

Syntax Description

show

Show running system information

l2fwder

Display L2FWDER forwarding information

statistics

Show L2FWDER packet counters

Command Mode

- /exec

show l2rib clients

show l2rib clients [ <client_id> ] [ __readonly__ TABLE_l2rib_clients <client-id> <uuid> <process-suffix> ]

Syntax Description

Syntax Description

show

Show running system information

l2rib

Layer 2 routing information base

clients

L2RIB Clients

client_id

(Optional) Enter Client ID

__readonly__

(Optional)

TABLE_l2rib_clients

(Optional) L2RIB Clients Table

client-id

(Optional) Client ID

uuid

(Optional) Process ID

process-suffix

(Optional) Process Name Suffix

Command Mode

- /exec

show l2rib internal client-stats

show l2rib internal client-stats [ <client_id> ]

Syntax Description

Syntax Description

show

Show running system information

l2rib

Layer 2 routing information base

internal

Display Layer 2 RIB internal information

client-stats

L2RIB Client Stats

client_id

(Optional) Enter Client ID

Command Mode

- /exec

show l2rib internal mem-stats

show l2rib internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

l2rib

Layer 2 routing information base

internal

Layer2 RIB internal information

mem-stats

Dynamic memory stats

detail

(Optional) Detailed information

Command Mode

- /exec

show l2rib internal pss

show l2rib internal pss <rt-enum>

Syntax Description

Syntax Description

show

Show running system information

l2rib

Layer 2 routing information base

internal

Layer2 RIB internal information

pss

Display all PSS information

rt-enum

Runtime PSS key types

Command Mode

- /exec

show l2rib internal state

show l2rib internal state

Syntax Description

Syntax Description

show

Show running system information

l2rib

Layer 2 routing information base

internal

Layer2 RIB internal information

state

Show L2RIB state

Command Mode

- /exec

show l2rib internal stats

show l2rib internal stats

Syntax Description

Syntax Description

show

Show running system information

l2rib

Layer 2 routing information base

internal

Display Layer 2 RIB internal information

stats

L2RIB Stats

Command Mode

- /exec

show l2rib internal txlist

show l2rib internal txlist { all | client | ead-es | topo | ead-pl | mac-local-static | mac-bgp | mac-vxlan | mac-lisp | mac-best-route | mac-ip-bgp | mac-ip-best-route | imet-vxlan-fl | topo-eoc | eoc | arp-signal | signal } { all | elements | members }

Syntax Description

Syntax Description

show

Show running system information

l2rib

Layer 2 routing information base

internal

Display Layer2 RIB internal information

txlist

L2RIB TxList

all

All TxLists

client

Bind-ACK Txlist for clients

ead-es

EAD/ES route and ES route

topo

Topology

ead-pl

Ethernet-AD and Path-List

mac-local-static

Mac (Local and Static) TxList

mac-bgp

Mac BGP

mac-vxlan

Mac VxLAN

mac-lisp

Mac LISP

mac-best-route

Mac Best-Route

mac-ip-bgp

Mac-IP BGP

mac-ip-best-route

Mac-IP Best-Route

imet-vxlan-fl

IMET and VXLAN FL TxList

topo-eoc

Topology EOC TxList

eoc

EOC TxList

arp-signal

ARP Signaling

signal

Signaling

all

Both Elements/Members

elements

TxList Elements

members

TxList Members

Command Mode

- /exec

show l2rib internal unfreeze-list

show l2rib internal unfreeze-list

Syntax Description

Syntax Description

show

Show running system information

l2rib

Layer 2 routing information base

internal

Layer2 RIB internal information

unfreeze-list

Duplicate MACs that are pending unfreeze

Command Mode

- /exec

show l2rib producers

show l2rib producers [ { topology | mac | mac-ip | ead | pl | imet | flood-list | startup-route | peerid | es } [ static | local | bgp | vxlan | hmm | arp | ofa | lisp ] ] [ detail ] [ __readonly__ TABLE_l2rib_producers <prod-name> <prod-id> <client-id> <obj-type> <admin-dist> <purge-time> <state> [ <prod-flags> ] ]

Syntax Description

Syntax Description

show

Show running system information

l2rib

Layer 2 routing information base

producers

L2RIB Producers

detail

(Optional) Detailed information

topology

(Optional) Filter on Topology

mac

(Optional) Filter on MAC

mac-ip

(Optional) Filter on MAC-IP

ead

(Optional) Filter on Ethernet-AD

pl

(Optional) Filter on Path List

imet

(Optional) Filter on IMET Route

flood-list

(Optional) Filter on Flood List

startup-route

(Optional) Filter on Startup Route

peerid

(Optional) Filter on Peerid

es

(Optional) Filter on ES

static

(Optional) Static

local

(Optional) Local

bgp

(Optional) BGP

vxlan

(Optional) VXLAN

hmm

(Optional) HMM

arp

(Optional) ARP

ofa

(Optional) OFA

lisp

(Optional) lisp

__readonly__

(Optional)

TABLE_l2rib_producers

(Optional) L2RIB Producers Table

prod-name

(Optional) Producer Name

prod-id

(Optional) Producer ID

client-id

(Optional) Client ID

obj-type

(Optional) Object Type

admin-dist

(Optional) Admin Distance

purge-time

(Optional) Purge Time

state

(Optional) State

prod-flags

(Optional) Global Producer Flags

Command Mode

- /exec

show l2rib registrations

show l2rib registrations [ client <client_id> [ <topo_id> { mac | mac-ip | ead | pl | imet | flood-list | arp-signal | startup-route | topo | es } ] ] [ __readonly__ TABLE_l2rib_registrations <client-id> <topo-id> <obj-type> <prod> ]

Syntax Description

Syntax Description

show

Show running system information

l2rib

Layer 2 routing information base

registrations

L2RIB Registrations

client

(Optional) Global Registraion Entries

client_id

(Optional) Enter Client ID

topo_id

(Optional) Enter Topology ID

mac

(Optional) Filter on MAC

mac-ip

(Optional) Filter on MAC-IP

ead

(Optional) Filter on Ethernet-AD

pl

(Optional) Filter on Path List

imet

(Optional) Filter on IMET Route

es

(Optional) Filter on Ethernet Segment ID

flood-list

(Optional) Filter on Flood List

startup-route

(Optional) Filter on Startup Route

arp-signal

(Optional) Filter on ARP Signal

topo

(Optional) Filter on Topo Subtype

__readonly__

(Optional)

TABLE_l2rib_registrations

(Optional) L2RIB Registrations Table

client-id

(Optional) Client ID

topo-id

(Optional) Topology ID

obj-type

(Optional) Object Type

prod

(Optional) Producer

Command Mode

- /exec

show l2route evpn ead all

show l2route evpn ead all [ detail ] [ __readonly__ TABLE_l2route_evpn_ead_all <topo-id> <prod> <esi> <client-nfn> <num_pls> [ { <next-hop> } ] ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

ead

EAD

all

Display all routes without filtering

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_evpn_ead_all

(Optional) L2RIB EVPN EAD All Table

topo-id

(Optional) Topology ID

prod

(Optional) Producer

esi

(Optional) ESI

client-nfn

(Optional) Client Notification Bitmap

num_pls

(Optional) Number of Path lists

next-hop

(Optional) Next Hop

Command Mode

- /exec

show l2route evpn ethernet-segment esi

show l2route evpn ethernet-segment { esi <esi-id> | all } [ bgp | vxlan ] [ detail ] [ __readonly__ TABLE_l2route_es <ethernet-segment> <originating-rtr> <prod-name> <int-ifhdl> <client-nfn> ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

ethernet-segment

Ethernet Segment ID

esi

ESI Value

esi-id

ESI ID

all

Display all entries without filtering

bgp

(Optional) Filter on BGP producer

vxlan

(Optional) Filter on VXLAN producer

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_es

(Optional) L2RIB ES Table

ethernet-segment

(Optional) ESI

originating-rtr

(Optional) Originating Router

prod-name

(Optional) Producer Name

int-ifhdl

(Optional) Interface Handle

client-nfn

(Optional) Client Notification Bitmap

Command Mode

- /exec

show l2route evpn fl all

show l2route evpn fl all [ detail ] [ __readonly__ TABLE_l2route_fl_all <topo-id> <peer-id> <flood-list> <is-service-node> [ <client-nfn> ] ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

fl

Flood List

all

Display all routes without filtering

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_fl_all

(Optional) L2RIB Flood List All Table

topo-id

(Optional) Topology ID

peer-id

(Optional) Peer-ID

flood-list

(Optional) Flood List

is-service-node

(Optional) Is Service Node

client-nfn

(Optional) Client Notification Bitmap

Command Mode

- /exec

show l2route evpn fl evi

show l2route evpn fl evi <vpn-id> [ detail ] [ __readonly__ TABLE_l2route_fl <peer-id> <flood-list> <is-service-node> [ <client-nfn> ] ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

fl

Flood List

evi

Filter on E-VPN identifier (VLAN-ID or BD-ID)

vpn-id

E-VPN identifier (VLAN-ID or BD-ID)

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_fl

(Optional) L2RIB Flood List Table

peer-id

(Optional) Peer-ID

flood-list

(Optional) Flood List

is-service-node

(Optional) Is Service Node

client-nfn

(Optional) Client Notification Bitmap

Command Mode

- /exec

show l2route evpn imet all

show l2route evpn imet all [ detail ] [ __readonly__ TABLE_l2route_imet_all <topo-id> <vni> <prod-type> <ip-addr> [ <eth-tag-id> ] [ <pmsi-flags> ] [ <flags> ] [ <type> ] [ <vni-label> ] [ <tunnel-id> ] [ <client-nfn> ] ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

imet

IMET Route

all

Display all routes without filtering

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_imet_all

(Optional) L2RIB IMET All Table

topo-id

(Optional) Topology ID

vni

(Optional) VNI

prod-type

(Optional) Producer Type

ip-addr

(Optional) IP Address

eth-tag-id

(Optional) Ethernet Tag ID

pmsi-flags

(Optional) PMSI Flags

flags

(Optional) Flags

type

(Optional) Type

vni-label

(Optional) VNI Label

tunnel-id

(Optional) Tunnel ID

client-nfn

(Optional) Client Notification Bitmap

Command Mode

- /exec

show l2route evpn imet evi

show l2route evpn imet evi <vpn-id> [ bgp | vxlan ] [ detail ] [ __readonly__ TABLE_l2route_imet <vni> <prod-type> <ip-addr> [ <eth-tag-id> ] [ <pmsi-flags> ] [ <flags> ] [ <type> ] [ <vni-label> ] [ <tunnel-id> ] [ <client-nfn> ] ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

imet

IMET Route

evi

Filter on E-VPN identifier (VLAN-ID or BD-ID)

vpn-id

E-VPN identifier (VLAN-ID or BD-ID)

bgp

(Optional) Filter on BGP producer (remote imet routes)

vxlan

(Optional) Filter on VXLAN producer (local imet routes)

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_imet

(Optional) L2RIB IMET Table

vni

(Optional) VNI

prod-type

(Optional) Producer Type

ip-addr

(Optional) IP Address

eth-tag-id

(Optional) Ethernet Tag ID

pmsi-flags

(Optional) PMSI Flags

flags

(Optional) Flags

type

(Optional) Type

vni-label

(Optional) VNI Label

tunnel-id

(Optional) Tunnel ID

client-nfn

(Optional) Client Notification Bitmap

Command Mode

- /exec

show l2route evpn mac-ip all

show l2route evpn mac-ip all [ detail ] [ __readonly__ TABLE_l2route_mac_ip_all <topo-id> <mac-addr> <prod-type> <flags> <seq-num> <host-ip> <next-hop1> [ <next-hop2> ] [ <l3-info> ] [ <fwd-state> ] [ <rte-res> ] [ <sent-to> ] [ <peerid> ] [ <peer-ifindex> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

mac-ip

MAC-IP Route

all

Display all routes without filtering

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_mac_ip_all

(Optional) L2RIB Mac-IP All Table

topo-id

(Optional) Topology ID

mac-addr

(Optional) Mac Address

prod-type

(Optional) Producer Type

flags

(Optional) Flags

seq-num

(Optional) Sequence Number

host-ip

(Optional) Host IP

next-hop1

(Optional) Next Hop 1

next-hop2

(Optional) Next Hop 2

l3-info

(Optional) L3 Information

fwd-state

(Optional) Forwarding State

rte-res

(Optional) Route Resolution

sent-to

(Optional) Active Clients

peerid

(Optional) Peer ID

peer-ifindex

(Optional) Peer Interface Index

esi-id

(Optional) ESI ID

soo

(Optional) SOO

pcinfo

(Optional) Port-Channel Info

Command Mode

- /exec

show l2route evpn mac-ip evi

show l2route evpn mac-ip evi <vpn-id> [ arp | bgp | hmm ] [ mac <mac_addr> ] [ host-ip { <ipv4_host> | <ipv6_host> } ] [ next-hop { <ipv4_addr> | <ipv6_addr> | <if-hdl> } ] [ detail ] [ __readonly__ TABLE_l2route_mac_ip_evi <topo-id> <mac-addr> <prod-type> <seq-num> <host-ip> <next-hop1> [ <next-hop2> ] [ <l3-info> ] [ <fwd-state> ] [ <rte-res> ] [ <sent-to> ] [ <peerid> ] [ <peer-ifindex> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

mac-ip

MAC-IP Route

evi

Filter on E-VPN identifier (VLAN-ID or BD-ID)

vpn-id

E-VPN identifier (VLAN-ID or BD-ID)

arp

(Optional) Filter on ARP producer

bgp

(Optional) Filter on BGP producer

hmm

(Optional) Filter on HMM producer

mac

(Optional) Filter on MAC address

mac_addr

(Optional) 48-bit MAC address value

host-ip

(Optional) Filter on Host IP address

ipv4_host

(Optional) IPv4 address

next-hop

(Optional) Filter on Next-Hop IP or Interface Name

ipv4_addr

(Optional) IPv4 address of Next Hop

if-hdl

(Optional) Interface index of Next Hop

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_mac_ip_evi

(Optional) L2RIB Mac-IP Table

topo-id

(Optional) Topology ID

mac-addr

(Optional) Mac Address

prod-type

(Optional) Producer Type

host-ip

(Optional) Host IP

seq-num

(Optional) Sequence Number

next-hop1

(Optional) Next Hop 1

next-hop2

(Optional) Next Hop 2

fwd-state

(Optional) Forwarding State

rte-res

(Optional) Route Resolution

sent-to

(Optional) Active Clients

esi-id

(Optional) ESI ID

soo

(Optional) SOO

pcinfo

(Optional) Port-Channel Info

l3-info

(Optional) L3 Information

peerid

(Optional) Peer ID

peer-ifindex

(Optional) Peer Interface Index

Command Mode

- /exec

show l2route evpn mac all

show l2route evpn mac all [ detail ] [ __readonly__ TABLE_l2route_mac_all <topo-id> <mac-addr> <prod-type> <flags> <seq-num> <next-hop1> [ <next-hop2> ] [ <rte-res> ] [ <fwd-state> ] [ <res-pl-next-hop1> ] [ <res-pl-next-hop2> ] [ <sent-to> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

mac

MAC Route

all

Display all routes without filtering

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_mac_all

(Optional) L2RIB Mac All Table

topo-id

(Optional) Topology ID

mac-addr

(Optional) Mac Address

prod-type

(Optional) Producer Type

flags

(Optional) Flags

seq-num

(Optional) Sequence Number

fwd-state

(Optional) Forwarding State

res-pl-next-hop1

(Optional) Resultant PL Next hop 1

res-pl-next-hop2

(Optional) Resultant PL Next hop 2

rte-res

(Optional) Route Resolution

sent-to

(Optional) Active Clients

esi-id

(Optional) ESI ID

soo

(Optional) SOO

pcinfo

(Optional) Port-Channel Info

next-hop1

(Optional) Next Hop 1

next-hop2

(Optional) Next Hop 2

Command Mode

- /exec

show l2route evpn mac evi

show l2route evpn mac evi <vpn-id> [ static | local | bgp | vxlan | lisp ] [ mac <mac_addr> ] [ next-hop { <ipv4_addr> | <ipv6_addr> | <if-hdl> } ] [ esi <esi-id> ] [ detail ] [ __readonly__ TABLE_l2route_mac_evi <topo-id> <mac-addr> <prod-type> <flags> <seq-num> <next-hop1> [ <next-hop2> ] [ <rte-res> ] [ <fwd-state> ] [ <res-pl-next-hop1> ] [ <res-pl-next-hop2> ] [ <sent-to> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

mac

MAC Route

evi

Filter on E-VPN identifier (VLAN-ID or BD-ID)

vpn-id

E-VPN identifier (VLAN-ID or BD-ID)

static

(Optional) Filter on Static producer

local

(Optional) Filter on Local producer

bgp

(Optional) Filter on BGP producer

vxlan

(Optional) Filter on VXLAN producer

lisp

(Optional) Filter on LISP producer

mac

(Optional) Filter on MAC address

esi

(Optional) Filter on ESI value

mac_addr

(Optional) Enter 48-bit MAC address value

next-hop

(Optional) Filter on Next-Hop IP or Interface Name

ipv4_addr

(Optional) IPv4 address of Next Hop

if-hdl

(Optional) Interface index of Next Hop

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_mac_evi

(Optional) L2RIB Mac EVI Table

topo-id

(Optional) Topology ID

mac-addr

(Optional) Mac Address

prod-type

(Optional) Producer Type

flags

(Optional) Flags

seq-num

(Optional) Sequence Number

next-hop1

(Optional) Next Hop 1

next-hop2

(Optional) Next Hop 2

fwd-state

(Optional) Forwarding State

res-pl-next-hop1

(Optional) Resultant PL Next hop 1

res-pl-next-hop2

(Optional) Resultant PL Next hop 2

rte-res

(Optional) Route Resolution

sent-to

(Optional) Active Clients

esi-id

(Optional) ESI ID

soo

(Optional) SOO

pcinfo

(Optional) Port-Channel Info

Command Mode

- /exec

show l2route evpn path-list all

show l2route evpn path-list { all | esi <esi-id> } [ detail ] [ __readonly__ TABLE_l2route_evpn_pathlist_all <topo-id> <prod> <esi> [ <ecmp_label> ] [ <flags> ] [ <client_ctx> ] <mac-cnt> <client-nfn> [ { <cp-next-hop> } ] [ { <res-next-hop> } ] ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

path-list

Path-List

all

Display all routes without filtering

esi

ESI Value

esi-id

ESI ID

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_evpn_pathlist_all

(Optional) L2RIB EVPN Pathlist all Table

topo-id

(Optional) Topology ID

prod

(Optional) Producer

esi

(Optional) ESI

ecmp_label

(Optional) ECMP label

flags

(Optional) Flags

client_ctx

(Optional) Client context

mac-cnt

(Optional) Mac count

client-nfn

(Optional) Client Notification Bitmap

cp-next-hop

(Optional) Control plane Next hops

res-next-hop

(Optional) Resultant Next hops

Command Mode

- /exec

show l2route evpn startup-route all

show l2route evpn startup-route all [ detail ] [ __readonly__ TABLE_l2route_startup_route_all <topo-id> <src-group> <del-src-group> [ <src-lpbk-ifhdl> ] [ <nve-ifhdl> ] [ <flags> ] [ <client-nfn> ] ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

startup-route

Startup Route

all

Display all routes without filtering

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_startup_route_all

(Optional) L2RIB Startup-Route All Table

topo-id

(Optional) Topology ID

src-group

(Optional) Source Group

del-src-group

(Optional) Delivery Source Group

src-lpbk-ifhdl

(Optional) Source Loopback Interface Handle

nve-ifhdl

(Optional) NVE Interface Handle

flags

(Optional) Flags

client-nfn

(Optional) Client Notification Bitmap

Command Mode

- /exec

show l2route evpn startup-route evi

show l2route evpn startup-route evi <vpn-id> [ detail ] [ __readonly__ TABLE_l2route_startup_route <src-group> <del-src-group> [ <src-lpbk-ifhdl> ] [ <nve-ifhdl> ] [ <flags> ] [ <client-nfn> ] ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

startup-route

Startup Route

evi

Filter on E-VPN identifier (VLAN-ID or BD-ID)

vpn-id

E-VPN identifier (VLAN-ID or BD-ID)

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_startup_route

(Optional) L2RIB Startup-Route Table

src-group

(Optional) Source Group

del-src-group

(Optional) Delivery Source Group

src-lpbk-ifhdl

(Optional) Source Loopback Interface Handle

nve-ifhdl

(Optional) NVE Interface Handle

flags

(Optional) Flags

client-nfn

(Optional) Client Notification Bitmap

Command Mode

- /exec

show l2route fl topology

show l2route fl { topology <topo-id> | all } [ detail ] [ __readonly__ TABLE_l2route_fl [ <topo-id> ] <peer-id> <flood-list> <is-service-node> [ <client-nfn> ] ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

fl

Flood List

all

Display all routes without filtering

topology

Filter on toplogy ID

topo-id

topology ID

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_fl

(Optional) L2RIB Flood List Table

topo-id

(Optional) Topology ID

peer-id

(Optional) Peer-ID

flood-list

(Optional) Flood List

is-service-node

(Optional) Is Service Node

client-nfn

(Optional) Client Notification Bitmap

Command Mode

- /exec

show l2route peerid

show l2route peerid [ __readonly__ TABLE_l2route_peerid <if-hdl> <ip-addr> <peer-id> <if-idx> <num-macs> <num-nhs> ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

peerid

Display Peer ID DB

__readonly__

(Optional)

TABLE_l2route_peerid

(Optional) L2RIB Peer-ID Table

if-hdl

(Optional) Interface Handle

ip-addr

(Optional) IP Address

if-idx

(Optional) Peer Interface Index

peer-id

(Optional) Peer-ID

num-macs

(Optional) Number of Macs

num-nhs

(Optional) Number of NHs

Command Mode

- /exec

show l2route summary

show l2route summary [ __readonly__ { <total_memory> <numof_converged_tables> [ { TABLE_l2route_summary <table_name> { TABLE_producer <producer_name> <id> <objects> <memory> } <total><total_obj><total_mem> } ] } ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

summary

Summary

__readonly__

(Optional) Read only

total_memory

(Optional) Total memory

numof_converged_tables

(Optional) Number of converged tables

TABLE_l2route_summary

(Optional) L2route summary table

table_name

(Optional) Table name

TABLE_producer

(Optional) Producer table

producer_name

(Optional) Producer name

id

(Optional) id

objects

(Optional) objects

memory

(Optional) Memory

Command Mode

- /exec

show l2route topology

show l2route topology [ <topo_id> ] [ detail ] [ __readonly__ TABLE_l2route_topology <topo-id> <topo-name> <topo-type> [ <vni> ] [ <encap-type> ] [ <iod> ] [ <if-hdl> ] [ <vtep-ip> ] [ <emulated-ip> ] [ <emulated-ro-ip> ] [ <tx-id> ] [ <rcvd-flag> ] [ <rmac> ] [ <vrf-id> ] [ <vmac> ] [ <flags> ] [ <sub-flags> ] [ <prev-flags> ] ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

topology

Display topology IDs

topo_id

(Optional) Enter Topology ID

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_topology

(Optional) L2RIB Topology Table

topo-id

(Optional) Topology ID

topo-name

(Optional) Topology Name

topo-type

(Optional) Topology Type

vni

(Optional) VNI

encap-type

(Optional) Encap Type

iod

(Optional) IOD

if-hdl

(Optional) Interface Handle

vtep-ip

(Optional) VTEP IP Address

emulated-ip

(Optional) Emulated VTEP IP Address

emulated-ro-ip

(Optional) Emulated RO VTEP IP Address

tx-id

(Optional) Transaction ID for Topology Ack

rcvd-flag

(Optional) Flag to Indicate Topology Ack

rmac

(Optional) Local Router MAC (For L3 VNIs)

vrf-id

(Optional) VRF ID (For L3 VNIs)

vmac

(Optional) Local Virtual MAC (For L3 VNIs)

flags

(Optional) Flags

sub-flags

(Optional) Sub Flags

prev-flags

(Optional) Previous Flags

Command Mode

- /exec

show l2route topology

show l2route { mac | openflow mac | dataplane mac [ local | remote ] } { topology <topo-id> | all } [ detail ] [ __readonly__ TABLE_l2route_mac <topo-id> <mac-addr> <prod-type> <flags> <seq-num> <next-hop1> [ <next-hop2> ] [ <rte-res> ] [ <fwd-state> ] [ <res-pl-next-hop1> ] [ <res-pl-next-hop2> ] [ <sent-to> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

dataplane

dataplane

openflow

openflow

mac

MAC Route

all

Display all routes without filtering

local

(Optional) dataplane learnt local routes

remote

(Optional) dataplane learnt remote routes

topology

Filter on toplogy ID

topo-id

topology ID

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_mac

(Optional) L2RIB Mac All Table

topo-id

(Optional) Topology ID

mac-addr

(Optional) Mac Address

prod-type

(Optional) Producer Type

flags

(Optional) Flags

seq-num

(Optional) Sequence Number

next-hop1

(Optional) Next Hop 1

next-hop2

(Optional) Next Hop 2

fwd-state

(Optional) Forwarding State

res-pl-next-hop1

(Optional) Resultant PL Next hop1

res-pl-next-hop2

(Optional) Resultant PL Next hop2

rte-res

(Optional) Route Resolution

sent-to

(Optional) Active Clients

esi-id

(Optional) ESI ID

soo

(Optional) SOO

pcinfo

(Optional) Port-Channel Info

Command Mode

- /exec

show l2route topology

show l2route { mac-ip | openflow mac-ip } { topology <topo-id> | all } [ detail ] [ __readonly__ TABLE_l2route_mac_ip_openflow <topo-id> <mac-addr> <prod-type> <seq-num> <host-ip> <next-hop1> [ <next-hop2> ] [ <l3-info> ] [ <fwd-state> ] [ <rte-res> ] [ <sent-to> ] [ <peerid> ] [ <peer-ifindex> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

Syntax Description

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

mac-ip

MAC-IP Route

all

Display all routes without filtering

openflow

openflow

topology

Filter on toplogy ID

topo-id

topology ID

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_mac_ip_openflow

(Optional) L2RIB Mac-IP Table

topo-id

(Optional) Topology ID

mac-addr

(Optional) Mac Address

prod-type

(Optional) Producer Type

host-ip

(Optional) Host IP

next-hop1

(Optional) Next Hop 1

next-hop2

(Optional) Next Hop 2

seq-num

(Optional) Sequence Number

fwd-state

(Optional) Forwarding State

rte-res

(Optional) Route Resolution

sent-to

(Optional) Active Clients

esi-id

(Optional) ESI ID

soo

(Optional) SOO

pcinfo

(Optional) Port-Channel Info

l3-info

(Optional) L3 Information

peerid

(Optional) Peer ID

peer-ifindex

(Optional) Peer Interface Index

Command Mode

- /exec

show lacp counters

show lacp counters [ interface <if0> ] [ __readonly__ TABLE_interface <interface> TABLE_member <port> <pdus-sent> <pdus-rcvd> <marker-rcvd> <marker-resp-sent> <pkt-errors> [ <illegal-rcvd> ] [ <unknown-rcvd> ] ]

Syntax Description

Syntax Description

show

Show running system information

lacp

LACP protocol

counters

LACP counters

interface

(Optional) Specify a port-channel

if0

(Optional)

__readonly__

(Optional)

TABLE_interface

(Optional) Port channel table

interface

(Optional) Port channel

TABLE_member

(Optional) Member port info

port

(Optional) Member port

pdus-sent

(Optional) Number of PDUs sent

pdus-rcvd

(Optional) Number of PDUs received

marker-rcvd

(Optional) Number of Marker PDUs received

marker-resp-sent

(Optional) Number of Marker response PDUs sent

pkt-errors

(Optional) Number of packet errors

illegal-rcvd

(Optional) Number of illegal packets received

unknown-rcvd

(Optional) Number of unknown packets received

Command Mode

- /exec

show lacp interface

show lacp interface [ <if0> ] [ __readonly__ <interface> <operational-state> <channel-group> <port-channel> <pdus-sent> <pdus-rcvd> <marker-sent> <marker-rcvd> <marker-resp-sent> <marker-resp-rcvd> <unknown-rcvd> <illegal-rcvd> <lag-id> <active-time> { localport <local-interface> <local-mac-address> <local-system-priority> <local-port-priority> <local-port-num> <local-op-key> <local-activity> <local-timeout> <local-sync> <local-collecting> <local-distributing> <partner-info-timeout> <local-admin-state> <local-oper-state> } { partnerport <partner-interface> <partner-mac-address> <partner-system-priority> <partner-port-priority> <partner-port-num> <partner-op-key> <partner-activity> <partner-timeout> <partner-sync> <partner-collecting> <partner-distributing> <partner-admin-state> <partner-oper-state> } <agg-or-indiv> ]

Syntax Description

Syntax Description

show

Show running system information

lacp

LACP protocol

interface

Specify a interface

if0

(Optional)

__readonly__

(Optional)

interface

(Optional) Interface ID

channel-group

(Optional) Channel Group

port-channel

(Optional) Port Channel

lag-id

(Optional) LAG Id

active-time

(Optional) active-time

operational-state

(Optional) Operational State

agg-or-indiv

(Optional) Aggregate or individual port

pdus-rcvd

(Optional) PDUs received

pdus-sent

(Optional) PDUs sent

marker-rcvd

(Optional) Markers received

marker-sent

(Optional) Markers sent

marker-resp-rcvd

(Optional) Marker response received

marker-resp-sent

(Optional) Marker response sent

unknown-rcvd

(Optional) Unknown pdus received

illegal-rcvd

(Optional) Illegal pdus received

localport

(Optional) Local port information

local-interface

(Optional) Interface

local-mac-address

(Optional) MAC Address

local-system-priority

(Optional) System Priority

local-port-priority

(Optional) Port Priority

local-port-num

(Optional) Port Number

local-op-key

(Optional) Operational Key

local-admin-state

(Optional) Local Admin State

local-oper-state

(Optional) Local Oper State

local-activity

(Optional) Mode

local-timeout

(Optional) Timeout

local-sync

(Optional) Synchronization

local-distributing

(Optional) Distributing

local-collecting

(Optional) Collecting

partner-info-timeout

(Optional) Partner information refresh timeout

partnerport

(Optional) Partner port information

partner-interface

(Optional) Partner Interface

partner-mac-address

(Optional) Partner MAC Address

partner-system-priority

(Optional) Partner System Priority

partner-port-priority

(Optional) Partner Port Priority

partner-port-num

(Optional) Partner Port Number

partner-op-key

(Optional) Operational Key

partner-admin-state

(Optional) Partner Admin State

partner-oper-state

(Optional) Partner Oper State

partner-activity

(Optional) Mode

partner-timeout

(Optional) Timeout

partner-sync

(Optional) Synchronization

partner-distributing

(Optional) Distributing

partner-collecting

(Optional) Collecting

Command Mode

- /exec

show lacp internal debug

show lacp internal debug [ interface <if0> ] [ __readonly__ <interface> <rx-state> <last-rx-time> <mux-state> <mux-reason> <actor-churn-state> <partner-churn-state> <actor-churn-count> <partner-churn-count> <actor-sync-trans-count> <partner-sync-trans-count> <actor-change-count> <partner-change-count> ]

Syntax Description

Syntax Description

show

Show running system information

lacp

LACP protocol

internal

Show lacp service internal status

debug

LACP debug

interface

(Optional) Specify a interface

if0

(Optional)

__readonly__

(Optional)

interface

(Optional) Ethernet interface

rx-state

(Optional) RX State

last-rx-time

(Optional) Last RX Time

mux-state

(Optional) MUX State

mux-reason

(Optional) MUX Reason

actor-churn-state

(Optional) Actor Churn state

partner-churn-state

(Optional) Partner Churn State

actor-churn-count

(Optional) Actor Churn Count

partner-churn-count

(Optional) Partner Churn Count

actor-sync-trans-count

(Optional) Actor Sync Transition Count

partner-sync-trans-count

(Optional) Partner Sync Transition Count

actor-change-count

(Optional) Actor Change Count

partner-change-count

(Optional) Partner Change Count

Command Mode

- /exec

show lacp internal debug buffer

show lacp internal debug buffer

Syntax Description

Syntax Description

show

Show running system information

lacp

Show LACP information

internal

Show lacp service internal status

debug

LACP debug

buffer

LACP debug buffer

Command Mode

- /exec

show lacp internal event-history errors

show lacp internal event-history errors

Syntax Description

Syntax Description

show

Show running system information

lacp

Show lacp information

internal

Show lacp service internal status

event-history

Show event logs of lacp

errors

Show error logs of lacp

Command Mode

- /exec

show lacp internal event-history global

show lacp internal event-history global

Syntax Description

Syntax Description

show

Show running system information

lacp

Show lacp information

internal

Show lacp service internal status

event-history

Show event logs of lacp

global

Show global event transition

Command Mode

- /exec

show lacp internal event-history interface

show lacp internal event-history interface <if0>

Syntax Description

Syntax Description

show

Show running system information

lacp

Show lacp information

internal

Show lacp service internal status

event-history

Show event logs of lacp

interface

Show interface event transition

if0

Enter interface name

Command Mode

- /exec

show lacp internal event-history lock

show lacp internal event-history lock

Syntax Description

Syntax Description

show

Show running system information

lacp

Show lacp information

internal

Show lacp service internal status

event-history

Show event logs of lacp

lock

Show lock logs of lacp

Command Mode

- /exec

show lacp internal event-history msgs

show lacp internal event-history msgs

Syntax Description

Syntax Description

show

Show running system information

lacp

Show lacp information

internal

Show lacp service internal status

event-history

Show event logs of lacp

msgs

Show message logs of lacp

Command Mode

- /exec

show lacp internal info

show lacp internal info [ { global | all | log | reset } ]

Syntax Description

Syntax Description

show

Show running system information

lacp

Show lacp information

internal

Show lacp service internal status

info

Show internal information

all

(Optional) Show all the internal information

global

(Optional) Display lacp global info

reset

(Optional) Display lacp global info

log

(Optional) Display min-links log

Command Mode

- /exec

show lacp internal info interface

show lacp internal info interface <if0> [ detail { fsmlog } ]

Syntax Description

Syntax Description

show

Show running system information

lacp

Show lacp information

internal

Show lacp service internal status

info

Show internal information

interface

Display lacp interface info

detail

(Optional) For detailed dump

fsmlog

(Optional) For fsmlog dump

if0

Enter interface name

Command Mode

- /exec

show lacp internal mem-stats

show lacp internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

lacp

Show lacp information

internal

Show lacp service internal status

mem-stats

Show memory allocation statistics of lacp

detail

(Optional) Show detail memstats for lacp

Command Mode

- /exec

show lacp internal mib

show lacp internal mib [ __readonly__ <tables-last-changed> ]

Syntax Description

Syntax Description

show

Show running system information

lacp

LACP protocol

internal

Show lacp service internal status

mib

Show lacp mib information

__readonly__

(Optional)

tables-last-changed

(Optional) tables-last-changed

Command Mode

- /exec

show lacp issu-impact

show lacp issu-impact [ __readonly__ TABLE_interface <interface> ]

Syntax Description

Syntax Description

show

Show running system information

lacp

Show LACP information

issu-impact

Check for ISSU readiness

__readonly__

(Optional)

TABLE_interface

(Optional) Port-channel issu-impact member list

interface

(Optional) Port-channel Member

Command Mode

- /exec

show lacp neighbor

show lacp neighbor [ interface <if0> ] [ __readonly__ TABLE_interface <interface> TABLE_member <port> <partner-system-id> <partner-port-num> <partner-age> <partner-flags> <partner-port-priority> <partner-oper-key> <partner-port-state> ]

Syntax Description

Syntax Description

show

Show running system information

lacp

LACP protocol

neighbor

LACP interface neighbor

interface

(Optional) Specify a port-channel

if0

(Optional)

__readonly__

(Optional)

TABLE_interface

(Optional) Port channel table

interface

(Optional) Port channel

TABLE_member

(Optional) Member port info

port

(Optional) Member port

partner-system-id

(Optional) Partner System ID

partner-port-num

(Optional) Partner Port Number

partner-age

(Optional) Partner age

partner-flags

(Optional) Partner flags

partner-port-priority

(Optional) Partner Port Priority

partner-oper-key

(Optional) Partner oper key

partner-port-state

(Optional) Partner port state

Command Mode

- /exec

show lacp port-channel

show lacp port-channel [ interface <if0> ] [ __readonly__ TABLE_interface <interface> <aggr-mac-address> <local-system-priority> <local-system-id> <local-admin-key> <local-oper-key> <partner-system-priority> <partner-system-id> <partner-oper-key> <max-delay> <agg-or-indiv> { <port-list> } + ]

Syntax Description

Syntax Description

show

Show running system information

lacp

LACP protocol

port-channel

LACP port-channels

interface

(Optional) Specify a port-channel

if0

(Optional)

__readonly__

(Optional)

TABLE_interface

(Optional) Port channel table

interface

(Optional) Port channel

aggr-mac-address

(Optional) Mac Address of aggregator

local-system-priority

(Optional) Local System Priority

local-system-id

(Optional) Local System-Id

local-admin-key

(Optional) Local admin key

local-oper-key

(Optional) Local oper key

partner-system-priority

(Optional) Partner System Priority

partner-system-id

(Optional) Partner System-Id

partner-oper-key

(Optional) Partner oper key

max-delay

(Optional) Maximum delay between aggregator and mac-client

agg-or-indiv

(Optional) Aggregate or individual port

port-list

(Optional) List of port names for member ports

Command Mode

- /exec

show lacp system-identifier

show lacp system-identifier [ __readonly__ <system-priority> <system-mac> ]

Syntax Description

Syntax Description

show

Show running system information

lacp

LACP protocol

system-identifier

Show system-identifier information

__readonly__

(Optional)

system-priority

(Optional) System priority

system-mac

(Optional) System mac address

Command Mode

- /exec

show ldap-search-map

show ldap-search-map [ __readonly__ { number_of_search_maps <search_map_count> } { TABLE_ldap_searchmaps <map_name> [ <map_baseDN> <map_attr> <map_filter> ] } ]

Syntax Description

Syntax Description

__readonly__

(Optional)

number_of_search_maps

(Optional) Total number of search maps configured

search_map_count

(Optional) Ldap Search map count

TABLE_ldap_searchmaps

(Optional) Ldap search map configuration

map_name

(Optional) Search map name

map_baseDN

(Optional) Ldap base DN

map_attr

(Optional) Search map attribute

map_filter

(Optional) Ldap Search filter

show

Show running system information

ldap-search-map

Show LDAP configuration information

Command Mode

- /exec

show ldap-server

show ldap-server [ __readonly__ { global_timeout <g_timeout> } { global_port <g_port> } { global_deadtime <g_deadtime> } { total_number_of_server <g_servers_count> } { TABLE_ldap_hosts <ldap_host> <h_idletime> <h_test_user> <h_test_passwd> [ <h_test_dn> ] <h_timeout> <h_port> <h_rootDN> <h_ssl_enable> } ]

Syntax Description

Syntax Description

__readonly__

(Optional)

TABLE_ldap_hosts

(Optional) Ldap host configuration

global_timeout

(Optional) Ldap host global timeout

global_port

(Optional) Ldap host global port

global_deadtime

(Optional) Ldap host global deadtime

total_number_of_server

(Optional) Total number of ldap hosts configured

g_servers_count

(Optional) Total number of ldap hosts configured

g_timeout

(Optional) global timeout value

g_port

(Optional) Global ldap port

g_deadtime

(Optional) Global deadtime value

ldap_host

(Optional) Ldap host

h_idletime

(Optional) Ldap host idletime

h_test_user

(Optional) Ldap host testuser

h_test_passwd

(Optional) Ldap host password

h_test_dn

(Optional) Ldap testuser dn

h_timeout

(Optional) Ldap host timeout

h_port

(Optional) Ldap host port

h_rootDN

(Optional) Ldap host RootDN

h_ssl_enable

(Optional) Ldap host ssl configuration

show

Show running system information

ldap-server

Show LDAP configuration information

Command Mode

- /exec

show ldap-server groups

show ldap-server groups [ __readonly__ { total_number_of_groups <total_groups_count> } { TABLE_groups <g_name> <g_vrf> <g_mode> <is_bind_and_search> <g_append_with_baseDN> <g_compare_or_bind> <g_cmp_passwd_attr> [ <user-server-group> ] [ <Cert-DN-match> ] <auth_mechanism> [ TABLE_g_servers <g_server> <g_port> <g_timeout> ] [ <g_search_map> ] } ]

Syntax Description

Syntax Description

show

Show running system information

ldap-server

Show LDAP configuration information

groups

Show LDAP server group configuration information

__readonly__

(Optional)

total_number_of_groups

(Optional) Total number of Ldap groups configured

total_groups_count

(Optional) Ldap group count

TABLE_groups

(Optional) LDAP Group information

g_name

(Optional) Ldap group name

g_vrf

(Optional) LDAP group vrf

g_mode

(Optional) LDAP group mode

is_bind_and_search

(Optional) Ldap Authentication bind or search

g_append_with_baseDN

(Optional) LDAP baseDN append information

g_compare_or_bind

(Optional) LDAP bind or compare

g_cmp_passwd_attr

(Optional) LDAP compare password attribute

user-server-group

(Optional) Ldap server group validation

Cert-DN-match

(Optional) Ldap group CERT-DN match

auth_mechanism

(Optional) Ldap server group authentication mechanism

TABLE_g_servers

(Optional) LDAP group server information

g_server

(Optional) LDAP group host

g_port

(Optional) LDAP group host port

g_timeout

(Optional) LDAP griup host timeout

g_search_map

(Optional) LDAP group search map

Command Mode

- /exec

show ldap-server statistics

show ldap-server statistics <host0> [ __readonly__ { <server_state> [ <clock_time> { monitoring_statistics <time_in_pstate> <ndead> <tt_in_dstate> } ] } { { auth_statistics <auth_failed_transactions> <auth_succ_transactions> <auth_req_sent> <auth_req_timedout> <auth_resp_no_match> <auth_resp_not_processed> <auth_resp_error> } { acct_statistics <acct_failed_transactions> <acct_succ_transactions> <acct_req_sent> <acct_req_timedout> <acct_resp_no_match> <acct_resp_not_processed> <acct_resp_error> } } ]

Syntax Description

Syntax Description

show

Show running system information

ldap-server

Show LDAP configuration information

statistics

Show LDAP statistics

host0

DNS name or IP address

__readonly__

(Optional)

server_state

(Optional) Show state of server

clock_time

(Optional) Show clock time in terms of hours, minutes and seconds

monitoring_statistics

(Optional) Monitoring Statistics

time_in_pstate

(Optional) Time in previous state

ndead

(Optional) Number of times dead

tt_in_dstate

(Optional) Total time in dead state

auth_statistics

(Optional) Authentication Statistics

acct_statistics

(Optional) Accounting Statistics

auth_failed_transactions

(Optional) Authentication: Failed transactions

auth_succ_transactions

(Optional) Authentication: Successful transactions

auth_req_sent

(Optional) Authentication: Requests sent

auth_req_timedout

(Optional) Authentication: Requests timedout

auth_resp_no_match

(Optional) Authentication: Responses with no matching requests

auth_resp_not_processed

(Optional) Authentication: Responses not processed

auth_resp_error

(Optional) Authentication: Responses containing errors

acct_failed_transactions

(Optional) Accounting: Failed transactions

acct_succ_transactions

(Optional) Accounting: Successful transactions

acct_req_sent

(Optional) Accounting: Requests sent

acct_req_timedout

(Optional) Accounting: Requests timedout

acct_resp_no_match

(Optional) Accounting: Responses with no matching requests

acct_resp_not_processed

(Optional) Accounting: Responses not processed

acct_resp_error

(Optional) Accounting: Responses containing errors

Command Mode

- /exec

show license

show license [ __readonly__ { [ <lic_file_name> <lic_file_contents> ] + } ]

Syntax Description

Syntax Description

show

Show running system information

license

show the contents of all the license files

__readonly__

(Optional) Read only

lic_file_name

(Optional) Name of the license file

lic_file_contents

(Optional) License file contents

Command Mode

- /exec

show license brief

show license brief [ __readonly__ { [ <lic_file_name> ] + } ]

Syntax Description

Syntax Description

show

Show running system information

license

show the contents of all the license files

brief

Show a list of license files

__readonly__

(Optional) Read only

lic_file_name

(Optional) Name of the license file

Command Mode

- /exec

show license file

show license file <license-file> [ __readonly__ { [ <lic_file_contents> ] + } ]

Syntax Description

Syntax Description

show

Show running system information

license

Show the contents of all the license files

file

Show contents of a license file

license-file

Show the contents of license file __nil__ Please install a license before using this command.

__readonly__

(Optional) Read only

lic_file_contents

(Optional) License file contents

Command Mode

- /exec

show license host-id

show license host-id [ __readonly__ { <host_id> } ]

Syntax Description

Syntax Description

show

Show running system information

license

show the contents of all the license files

host-id

Show unique id for this host for licensing

__readonly__

(Optional) Read only

host_id

(Optional) unique id for this host for licensing

Command Mode

- /exec

show license reserved

show license reserved

Syntax Description

Syntax Description

show

show commands

license

Display licensing information

reserved

Display reserved licenses information

Command Mode

- /exec

show license usage

show license usage [ { detail | <license-feature> } ] [ __readonly__ { TABLE_show_lic_usage <feature_name> <lic_installed> <count> <status> <expiry_date> <comments> } <application_name> ]

Syntax Description

Syntax Description

show

Show running system information

license

show the contents of all the license files

usage

Show license usage table

detail

(Optional) Show license usage table

license-feature

(Optional) Show services using license

__readonly__

(Optional) Read only

TABLE_show_lic_usage

(Optional) License usage

feature_name

(Optional) Name of the feature

lic_installed

(Optional) Is the license installed?

count

(Optional) License count

status

(Optional) License status

expiry_date

(Optional) Expiry date of the license

comments

(Optional) License comments

application_name

(Optional) Name of the application using the license

Command Mode

- /exec

show line

show line [ __readonly__ <speed> <databits> <stopbits> <parity> <modem_in> <modem_init_str> <stat> [ TABLE_ps_output <ps> ] [ <speed_aux> <databits_aux> <stopbits_aux> <parity_aux> <modem_in_aux> <modem_init_str_aux> <hw_fc_aux> <stat_aux> [ TABLE_ps_output_aux <ps_aux> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

line

Show the line configuration

__readonly__

(Optional)

TABLE_ps_output

(Optional) Process info for console login

TABLE_ps_output_aux

(Optional) Process info for com1 login

speed

(Optional) Port speed(baud)

databits

(Optional) Bits per byte

stopbits

(Optional) Bits

parity

(Optional) Parity

modem_in

(Optional) Modem In

modem_init_str

(Optional) Modem Init-String

stat

(Optional) Statistics

ps

(Optional) Login process

speed_aux

(Optional) Port speed(baud)

databits_aux

(Optional) Bits per byte

stopbits_aux

(Optional) Bits

parity_aux

(Optional) Parity

modem_in_aux

(Optional) Modem In

modem_init_str_aux

(Optional) Modem Init-String

hw_fc_aux

(Optional) Hardware Flowcontrol

stat_aux

(Optional) Statistics

ps_aux

(Optional) Login process

Command Mode

- /exec

show line console

show line console [ __readonly__ <speed> <databits> <stopbits> <parity> <modem_in> <modem_init_str> <stat> [ TABLE_ps_output <ps> ] ]

Syntax Description

Syntax Description

show

Show running system information

line

Show the line configuration

console

Show console line configurations

__readonly__

(Optional)

TABLE_ps_output

(Optional) Process info for console login

speed

(Optional) Port speed(baud)

databits

(Optional) Bits per byte

stopbits

(Optional) Bits

parity

(Optional) Parity

modem_in

(Optional) Modem In

modem_init_str

(Optional) Modem Init-String

stat

(Optional) Statistics

ps

(Optional) Login process

Command Mode

- /exec

show line console connected

show line console connected [ __readonly__ <output> ]

Syntax Description

Syntax Description

show

Show running system information

line

Show the line configuration

console

Show console line configurations

connected

Show whether the line is currently connected physically

__readonly__

(Optional)

output

(Optional) output string

Command Mode

- /exec

show line console user-input-string

show line console user-input-string [ __readonly__ <input> ]

Syntax Description

Syntax Description

show

Show running system information

line

Show the line configuration

console

Show console line configurations

user-input-string

Show user-input init string

__readonly__

(Optional)

input

(Optional) user input string

Command Mode

- /exec

show lisp ddt

show lisp ddt [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

Syntax Description

show

Show running system information

lisp

LISP show commands

ddt

LISP Delegated Database Tree (LISP-DDT)

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show lisp ddt queue

show lisp ddt queue [ [ instance-id <iid> ] { <eid> | <eid6> } ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

Syntax Description

show

Show running system information

lisp

LISP show commands

ddt

LISP Delegated Database Tree (LISP-DDT)

queue

Display LISP-DDT Map-Request queue in Map-Resolver

instance-id

(Optional) Show instance-ID summary display

iid

(Optional) Instance-ID for EID-prefix

eid

(Optional) IPv4 EID address

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show lisp ddt referral-cache

{ show lisp ddt referral-cache [ [ instance-id <iid> ] { <eid> | <eid6> } ] [ vrf { <vrf-name> | <vrf-known-name> } ] } | { show lisp ddt referral-cache { ms-ack | ms-referral | node-referral | ms-not-registered | delegation-hole | not-authoritative } [ vrf { <vrf-name> | <vrf-known-name> } ] }

Syntax Description

Syntax Description

show

Show running system information

lisp

LISP show commands

ddt

LISP Delegated Database Tree (LISP-DDT)

referral-cache

Display LISP-DDT referral cache

instance-id

(Optional) Show instance-ID summary display

iid

(Optional) Instance-ID for EID-prefix

eid

(Optional) IPv4 EID address

ms-ack

Referral cache entries to map-servers

ms-referral

Referral cache entries from parent of map-servers

node-referral

Referral cache entries from parent of DDT-nodes

ms-not-registered

Referral cache entries from map-servers

delegation-hole

Referral cache entries from any DDT-node

not-authoritative

Referral cache entries from any DDT-node

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show lisp dynamic-eid

{ show lisp dynamic-eid { summary | { [ <dyn-eid-name> ] [ detail ] } } [ vrf { <vrf-name> | <vrf-known-name> } ] }

Syntax Description

Syntax Description

show

Show running system information

lisp

LISP show commands

dynamic-eid

Display dynamic-EIDs configured and discovered

summary

One-line summary display of discovered dynamic-EIDs

dyn-eid-name

(Optional) Display a single dynamic-EID

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

detail

(Optional) Display discovered dynamic-EIDs

Command Mode

- /exec

show lisp elp

show lisp elp [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

Syntax Description

show

Show running system information

lisp

LISP show commands

elp

Display LISP Explicit Locator Paths configured

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show lisp internal event-history

show lisp internal event-history { cli | statistics | msgs | <lisp-event-hist> }

Syntax Description

Syntax Description

show

Show running system information

lisp

Display LISP library buffer msgs or errors

internal

Commands for internal use

event-history

Display various event logs for LISP

cli

Show LISP CLI related events

statistics

Show LISP event-history statistics

msgs

Show LISP event-history of MTS messages

lisp-event-hist

Show LISP event log

Command Mode

- /exec

show lisp internal info

show lisp internal info

Syntax Description

Syntax Description

show

Show running system information

lisp

LISP show commands

internal

Commands for internal use

info

Show internal lisp library information

Command Mode

- /exec

show lisp internal ip multicast routes

show lisp internal { ip | ipv6 } multicast routes

Syntax Description

Syntax Description

show

Show running system information

lisp

Display LISP library buffer msgs or errors

internal

Commands for internal use

ip

Display IP information

ipv6

Display IPv6 information

multicast

Show multicast related information

routes

Show multicast routes

Command Mode

- /exec /exec/configure/vrf

show lisp internal library-info

show lisp internal library-info

Syntax Description

Syntax Description

show

Show running system information

lisp

Display LISP library buffer msgs or errors

internal

Commands for internal use

library-info

Show various event logs of library

Command Mode

- /exec

show lisp internal mem-stats

show lisp internal mem-stats [ no-libs ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

lisp

Display LISP memory usage information

internal

Commands for internal use

mem-stats

Show memory allocation statistics

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

Command Mode

- /exec

show lisp internal pss dyn-eid-source

show lisp internal pss dyn-eid-source

Syntax Description

Syntax Description

show

Show running system information

lisp

Display LISP map cache entries

internal

Commands for internal use

pss

Display entries in PSS

dyn-eid-source

Display discovered dynamic EID info in PSS

Command Mode

- /exec

show lisp internal pss map-cache

show lisp internal pss map-cache [ <eid-prefix> ]

Syntax Description

Syntax Description

show

Show running system information

lisp

Display LISP map cache entries

internal

Commands for internal use

pss

Display entries in PSS

map-cache

Display map cache entries

eid-prefix

(Optional) Display exact match for IP EID-prefix entry

Command Mode

- /exec

show lisp internal pss site

show lisp internal pss site [ <site-name> ]

Syntax Description

Syntax Description

show

Show running system information

lisp

Display LISP map cache entries

internal

Commands for internal use

pss

Display entries in PSS

site

Display site-eid entries in PSS

site-name

(Optional) VRF name

Command Mode

- /exec

show lisp internal ufdm-pending ip

show lisp internal ufdm-pending { ip | ipv6 }

Syntax Description

Syntax Description

show

Show running system information

lisp

Display LISP library buffer msgs or errors

internal

Commands for internal use

ufdm-pending

Display UFDM pending download queue

ip

Display IP information

ipv6

Display IPv6 information

Command Mode

- /exec

show lisp negative-prefix

show lisp negative-prefix { <eid> | <eid6> } [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

Syntax Description

show

Show running system information

lisp

LISP show commands

negative-prefix

Compute negative-prefix for hole in EID space

eid

IPv4 EID address

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show lisp proxy-itr

show lisp proxy-itr [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

Syntax Description

show

Show running system information

lisp

LISP show commands

proxy-itr

Display discovered proyx-ITRs (PITRs)

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show lisp site

{ show lisp site [ { { <eid> | <eid6> } [ instance-id <iid> ] } | { { <eid-prefix> | <eid-prefix6> } [ instance-id <iid> ] } | <site-name> ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> } ] }

Syntax Description

Syntax Description

show

Show running system information

lisp

LISP show commands

site

Display Map-Server site EID-prefixes configured

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

eid

(Optional) Display mapping for IP destination EID

eid-prefix

(Optional) Display exact match for IP EID-prefix entry

instance-id

(Optional) Instance EID-prefix registered in

iid

(Optional) Instance-ID value

site-name

(Optional) Display a single site

detail

(Optional) Display allowed registered locator sources

Command Mode

- /exec

show lisp site instance-id

{ show lisp site instance-id [ <iid> ] [ vrf { <vrf-name> | <vrf-known-name> } ] }

Syntax Description

Syntax Description

show

Show running system information

lisp

LISP show commands

site

Display Map-Server site EID-prefixes configured

instance-id

Show instance-ID summary display

iid

(Optional) Show detail for entries of a single Instance-ID

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show lisp smr

show lisp smr [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

Syntax Description

show

Show running system information

lisp

LISP show commands

smr

Display SMR state for dynamic-EIDs

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show lisp stats-cache

show lisp stats-cache [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

Syntax Description

show

Show running system information

lisp

LISP show commands

stats-cache

Show dynamic statistics cache

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

- /exec

show lldp all

show lldp all [ __readonly__ TABLE_lldp_all <intf_desc> <lldp_tx> <lldp_rx> <lldp_dcbx> ]

Syntax Description

Syntax Description

show

Show running system information

lldp

Show lldp Protocol information

all

Show all interfaces in lldp database

__readonly__

(Optional) Read only

TABLE_lldp_all

(Optional) output of show lldp all

intf_desc

(Optional) Interface desc

lldp_tx

(Optional) lldp tx status

lldp_rx

(Optional) lldp rx status

lldp_dcbx

(Optional) lldp dcbx status

Command Mode

- /exec

show lldp dcbx interface

show lldp dcbx interface <if0> [ __readonly__ <interface> [ <l_op_ver> <l_max_ver> <l_seq_no> <l_ack_no> [ <l_feature> <l_cfg_len> <l_cfg> ] + ] [ <p_op_ver> <p_max_ver> <p_seq_no> <p_ack_no> [ <p_tlv_type> <p_tlv_len> <p_tlv_value> ] + ] ]

Syntax Description

Syntax Description

show

Show running system information

lldp

Show information about lldp

dcbx

Show dcbx information

interface

Show lldp interface information

if0

Enter interface

__readonly__

(Optional)

interface

(Optional) Interface ID

l_op_ver

(Optional) local dcbx control operation version

l_max_ver

(Optional) local dcbx control maximum version

l_seq_no

(Optional) local dcbx control seq no

l_ack_no

(Optional) local dcbx control ack no

l_feature

(Optional) local feature

l_cfg_len

(Optional) local feature config length

l_cfg

(Optional) local feature config

p_op_ver

(Optional) peer dcbx control operation version

p_max_ver

(Optional) peer dcbx control maximum version

p_seq_no

(Optional) peer dcbx control seq no

p_ack_no

(Optional) peer dcbx control ack no

p_tlv_type

(Optional) peer TLV type field

p_tlv_len

(Optional) peer TLV len field

p_tlv_value

(Optional) peer TLV value field

Command Mode

- /exec

show lldp entry

show lldp entry [ <sys-name> ] [ __readonly__ { <neigh_hdr> } { TABLE_entry <chassis_type> <chassis_id> <port_type> <port_id> <l_port_id> <port_desc> <sys_name> <sys_desc> <ttl> <capability> <mgmt_addr_type> <mgmt_addr> <mgmt_addr_ipv6_type> <mgmt_addr_ipv6> <vlan_id> } { <neigh_count> } ]

Syntax Description

Syntax Description

show

Show running system information

lldp

Show information about lldp

entry

Show lldp entry information

sys-name

(Optional) WORD Peer's System name

__readonly__

(Optional)

neigh_hdr

(Optional)

TABLE_entry

(Optional) Table Entry

chassis_type

(Optional) Chassis ID type

chassis_id

(Optional) Chassis ID

port_type

(Optional) Port ID type

port_id

(Optional) Port ID

l_port_id

(Optional) Port ID

port_desc

(Optional) Port description

sys_name

(Optional) System name

sys_desc

(Optional) System description

ttl

(Optional) Time to live

capability

(Optional) Capability

mgmt_addr_type

(Optional) Management Address type

mgmt_addr

(Optional) Management Address

mgmt_addr_ipv6_type

(Optional) IPV6 Management Address type

mgmt_addr_ipv6

(Optional) IPV6 Management Address

vlan_id

(Optional) Vlan ID

neigh_count

(Optional)

Command Mode

- /exec

show lldp interface

show lldp interface <if0> [ __readonly__ <interface> <tx_en> <rx_en> <dcbx_en> <port_mac> [ <tlv_type> <tlv_len> <tlv_value> ] + [ <l_op_ver> <l_max_ver> <l_seq_no> <l_ack_no> [ <l_feature> <l_cfg_len> <l_cfg> ] + ] [ <p_op_ver> <p_max_ver> <p_seq_no> <p_ack_no> [ <p_tlv_type> <p_tlv_len> <p_tlv_value> ] + ] ]

Syntax Description

Syntax Description

show

Show running system information

lldp

Show information about lldp

interface

Show lldp interface information

if0

Enter interface

__readonly__

(Optional)

interface

(Optional) Interface ID

tx_en

(Optional) tx enable

rx_en

(Optional) rx enable

dcbx_en

(Optional) dcbx enable

port_mac

(Optional) Port mac address

tlv_type

(Optional) TLV type field

tlv_len

(Optional) TLV len field

tlv_value

(Optional) TLV value field

l_op_ver

(Optional) local dcbx control operation version

l_max_ver

(Optional) local dcbx control maximum version

l_seq_no

(Optional) local dcbx control seq no

l_ack_no

(Optional) local dcbx control ack no

l_feature

(Optional) local feature

l_cfg_len

(Optional) local feature config length

l_cfg

(Optional) local feature config

p_op_ver

(Optional) peer dcbx control operation version

p_max_ver

(Optional) peer dcbx control maximum version

p_seq_no

(Optional) peer dcbx control seq no

p_ack_no

(Optional) peer dcbx control ack no

p_tlv_type

(Optional) peer TLV type field

p_tlv_len

(Optional) peer TLV len field

p_tlv_value

(Optional) peer TLV value field

Command Mode

- /exec

show lldp neighbors

show lldp neighbors [ interface <if> ] [ __readonly__ { <neigh_hdr> } { TABLE_nbor <chassis_type> <chassis_id> <l_port_id> <ttl> <capability> <system_capability> <enabled_capability> <port_type> <port_id> <mgmt_addr_type> <mgmt_addr> <mgmt_addr_ipv6_type> <mgmt_addr_ipv6> } { <neigh_count> } ]

Syntax Description

Syntax Description

show

Show running system information

lldp

Show information about lldp

neighbors

Show lldp neighbor information

interface

(Optional) Show lldp neighbor information on an interface

if

(Optional) Enter interface

__readonly__

(Optional)

neigh_hdr

(Optional)

TABLE_nbor

(Optional) Neighbor Table

chassis_type

(Optional) Chassis ID type

chassis_id

(Optional) Chassis ID

l_port_id

(Optional) Local port ID

ttl

(Optional) Time to live

capability

(Optional) Capability

system_capability

(Optional) System Capability

enabled_capability

(Optional) Enabled Capability

port_type

(Optional) Port ID type

port_id

(Optional) Port ID

mgmt_addr_type

(Optional) Management Address type

mgmt_addr

(Optional) Management Address

mgmt_addr_ipv6_type

(Optional) IPV6 Management Address type

mgmt_addr_ipv6

(Optional) IPV6 Management Address

neigh_count

(Optional)

Command Mode

- /exec

show lldp neighbors detail

show lldp neighbors [ interface <if> ] detail [ __readonly__ { <neigh_hdr> } { TABLE_nbor_detail <chassis_type> <chassis_id> <port_type> <port_id> <l_port_id> <port_desc> <sys_name> <sys_desc> <ttl> <capability> <system_capability> <enabled_capability> <mgmt_addr_type> <mgmt_addr> <mgmt_addr_ipv6_type> <mgmt_addr_ipv6> <vlan_id> <invalid_vlan_id> } { <neigh_count> } ]

Syntax Description

Syntax Description

show

Show running system information

lldp

Show information about lldp

neighbors

Show lldp neighbor information

interface

(Optional) Show lldp neighbor information on an interface

if

(Optional) Enter interface

detail

Show lldp neighbor detail information

__readonly__

(Optional)

neigh_hdr

(Optional)

TABLE_nbor_detail

(Optional) Neighbor detail Table

chassis_type

(Optional) Chassis ID type

chassis_id

(Optional) Chassis ID

port_type

(Optional) Port ID type

port_id

(Optional) Port ID

l_port_id

(Optional) Port ID

port_desc

(Optional) Port description

sys_name

(Optional) System name

sys_desc

(Optional) System description

ttl

(Optional) Time to live

capability

(Optional) Capability

system_capability

(Optional) System Capability

enabled_capability

(Optional) Enabled Capability

mgmt_addr_type

(Optional) Management Address type

mgmt_addr

(Optional) Management Address

mgmt_addr_ipv6_type

(Optional) IPV6 Management Address type

mgmt_addr_ipv6

(Optional) IPV6 Management Address

vlan_id

(Optional) Vlan ID

invalid_vlan_id

(Optional) Invalid Vlan ID

neigh_count

(Optional)

Command Mode

- /exec

show lldp neighbors system-detail

show lldp neighbors [ interface <if> ] system-detail [ __readonly__ { <neigh_hdr> } { TABLE_nbor_sys_detail <sys_type> <sys_name> <l_port_id> <chassis_type> <chassis_id> <port_type> <port_id> <ttl> <capability> <mgmt_addr_type> <mgmt_addr> } { <neigh_count> } ]

Syntax Description

Syntax Description

show

Show running system information

lldp

Show information about lldp

neighbors

Show lldp neighbor information

interface

(Optional) Show lldp neighbor information on an interface

if

(Optional) Enter interface

system-detail

Show lldp neighbor system detail information

__readonly__

(Optional)

neigh_hdr

(Optional)

TABLE_nbor_sys_detail

(Optional) Neighbor sys-detail Table

sys_type

(Optional) System Type

sys_name

(Optional) System Name

l_port_id

(Optional) Local port ID

chassis_type

(Optional) Chassis ID type

chassis_id

(Optional) Chassis ID

port_type

(Optional) Port ID type

port_id

(Optional) Port ID

ttl

(Optional) Time to live

capability

(Optional) Capability

mgmt_addr_type

(Optional) Management Address type

mgmt_addr

(Optional) Management Address

neigh_count

(Optional)

Command Mode

- /exec

show lldp portid-subtype

show lldp portid-subtype [ __readonly__ <portid_subtype> ]

Syntax Description

Syntax Description

show

Show running system information

lldp

Show information about lldp

portid-subtype

Show lldp portid-subtype

__readonly__

(Optional)

portid_subtype

(Optional) portid-subtype for LLDP TLV and MIBs

Command Mode

- /exec

show lldp timers

show lldp timers [ __readonly__ <ttl> <reinit> <tx_interval> <tx_delay> <hold_mplier> <notification_interval> ]

Syntax Description

Syntax Description

show

Show running system information

lldp

Show information about lldp

timers

Show lldp timers

__readonly__

(Optional)

ttl

(Optional) Time to Live for lldp info

reinit

(Optional) Interface reinit timer

tx_interval

(Optional) Wait interval between successive transmit

tx_delay

(Optional) Delay between successive frame transmissions

hold_mplier

(Optional) Hold multiplier for ttl

notification_interval

(Optional) Notification interval for SNMP trap

Command Mode

- /exec

show lldp tlv-select

show lldp tlv-select [ __readonly__ <management-address-v4> <management-address-v6> <port-description> <port-vlan> <system-capabilities> <system-description> <system-name> <dcbxp> ]

Syntax Description

Syntax Description

show

Show running system information

lldp

Show information about lldp

tlv-select

Show lldp tlv-select

__readonly__

(Optional)

management-address-v4

(Optional) Management address v4

management-address-v6

(Optional) Management address v6

port-description

(Optional) Port description

port-vlan

(Optional) Port vlan

system-capabilities

(Optional) System capabilities

system-description

(Optional) System description

system-name

(Optional) System name

dcbxp

(Optional) DCBXP

Command Mode

- /exec

show lldp traffic

show lldp traffic [ __readonly__ <tx_cnt> <aged_cnt> <rx_cnt> <rx_err> <disc_cnt> <unrecognized_tlv> ]

Syntax Description

Syntax Description

show

Show running system information

lldp

Show information about lldp

traffic

Show lldp counters

__readonly__

(Optional)

tx_cnt

(Optional) Transmit count

aged_cnt

(Optional) Aged out count

rx_cnt

(Optional) Received count

rx_err

(Optional) Received error count

disc_cnt

(Optional) Disconnect count

unrecognized_tlv

(Optional) Unrecognized TLV count

Command Mode

- /exec

show lldp traffic interface

show lldp traffic interface <if> [ __readonly__ <interface> <tx_cnt> <aged_cnt> <rx_cnt> <rx_err> <disc_cnt> <unrecognized_tlv> ]

Syntax Description

Syntax Description

show

Show running system information

lldp

Show information about lldp

traffic

Show lldp counters

interface

Show lldp traffic counters on an interface

if

Enter interface

__readonly__

(Optional)

interface

(Optional) Interface ID

tx_cnt

(Optional) Transmit count

aged_cnt

(Optional) Aged out count

rx_cnt

(Optional) Received count

rx_err

(Optional) Received error count

disc_cnt

(Optional) Disconnect count

unrecognized_tlv

(Optional) Unrecognized TLV count

Command Mode

- /exec

show locator-led status

show locator-led status [ __readonly__ { TABLE_loc_led_stat <component> <status> } ]

Syntax Description

Syntax Description

show

Show running system information

locator-led

blink locator led on device

status

status

__readonly__

(Optional)

TABLE_loc_led_stat

(Optional)

component

(Optional)

status

(Optional)

Command Mode

- /exec

show logging

show logging

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

Command Mode

- /exec

show logging console

show logging console

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

console

Show console logging configuration

Command Mode

- /exec

show logging info

show logging info [ __readonly__ { <console_status> [ <console_severity> ] } { <monitor_status> [ <monitor_severity> ] } { <linecard_status> [ <linecard_severity> ] } { <log_timestamp> } [ { <source_interface_status> } [ <source_interface_intf> | <source_interface_intf_index><source_interface_error> ] ] { <server_status> [ { TABLE_logserver <server><forwarding><severity><facility><vrf><port> } ] } { { <origin_id_status> } [ <origin_id> ] } [ [ <logflash_status> ] [ <logflash_severity> ] ] { <logfile_status> [ <logfile_name><logfile_severity><logfile_size> ] } { { TABLE_facility <fac_name><def_level><cur_level> } { <fac_info> } } ]

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

info

Show logging configuration

__readonly__

(Optional)

console_status

(Optional) console logging status

console_severity

(Optional) console logging level

monitor_status

(Optional) monitor logging status

monitor_severity

(Optional) monitor logging level

linecard_status

(Optional) linecard logging status

linecard_severity

(Optional) linecard logging level

log_timestamp

(Optional) timestamp unit

source_interface_status

(Optional) source-interface logging status

source_interface_intf

(Optional) source-interface interface

server_status

(Optional) logging server status

TABLE_logserver

(Optional) output of show logging server

origin_id_status

(Optional) origin-id status

origin_id

(Optional) origin-id

logflash_status

(Optional) logflash status

logflash_severity

(Optional) logflash level

logfile_status

(Optional) logfile status

TABLE_facility

(Optional) output of show logging level(facility)

fac_info

(Optional) level info

Command Mode

- /exec

show logging internal info

show logging internal info

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration

internal

logging internal information

info

logging internal information

Command Mode

- /exec

show logging last

show logging last <i0>

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

last

Show last few lines of logfile

i0

Enter number of lines to display

Command Mode

- /exec

show logging level

show logging level [ { auth | authpriv | cron | daemon | ftp | kernel | local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7 | lpr | mail | news | syslog | user | uucp } ]

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

auth

(Optional) Show Authorization System logging configuration

authpriv

(Optional) Show Authorization (Private) logging configuration

cron

(Optional) Show Cron/at facility logging configuration

daemon

(Optional) Show System daemons logging configuration

ftp

(Optional) Show File Transfer System logging configuration

kernel

(Optional) Show kernel logging configuration

local0

(Optional) Show Local use daemons logging configuration

local1

(Optional) Show Local use daemons logging configuration

local2

(Optional) Show Local use daemons logging configuration

local3

(Optional) Show Local use daemons logging configuration

local4

(Optional) Show Local use daemons logging configuration

local5

(Optional) Show Local use daemons logging configuration

local6

(Optional) Show Local use daemons logging configuration

local7

(Optional) Show Local use daemons logging configuration

lpr

(Optional) Show Line Printer System logging configuration

mail

(Optional) Show Mail System logging configuration

news

(Optional) Show USENET news logging configuration

syslog

(Optional) Show Internal Syslog Messages logging configuration

user

(Optional) Show user process logging configuration

uucp

(Optional) Show Unix-to-Unix copy system logging configuration

Command Mode

- /exec

show logging level aaa

show logging level aaa

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

aaa

Show aaa logging configuration

Command Mode

- /exec

show logging level aclmgr

show logging level aclmgr

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

aclmgr

Show aclmgr logging configuration

Command Mode

- /exec

show logging level adbm

show logging level adbm

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

adbm

Show adbm logging configuration

Command Mode

- /exec

show logging level adjmgr

show logging level adjmgr

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

adjmgr

Show adjmgr logging configuration

Command Mode

- /exec

show logging level amt

show logging level amt

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

amt

Show amt logging configuration

Command Mode

- /exec

show logging level arp

show logging level arp

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

arp

Show arp logging configuration

Command Mode

- /exec

show logging level ascii-cfg

show logging level ascii-cfg

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ascii-cfg

Show ascii-cfg logging configuration

Command Mode

- /exec

show logging level bfd

show logging level bfd

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

bfd

Show bfd logging configuration

Command Mode

- /exec

show logging level bgp

show logging level bgp

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

bgp

Show BGP logging configuration

Command Mode

- /exec

show logging level bloggerd

show logging level bloggerd

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

bloggerd

Show BloggerD logging configuration

Command Mode

- /exec

show logging level bootvar

show logging level bootvar

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

bootvar

Show bootvar logging configuration

Command Mode

- /exec

show logging level callhome

show logging level callhome

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

callhome

Show callhome logging configuration

Command Mode

- /exec

show logging level capability

show logging level capability

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

capability

Show capability logging configuration

Command Mode

- /exec

show logging level catena

show logging level catena

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

catena

Show catena logging configuration

Command Mode

- /exec

show logging level cdp

show logging level cdp

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

cdp

Show CDP logging configuration

Command Mode

- /exec

show logging level cert-enroll

show logging level cert-enroll

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

cert-enroll

Show Cert-enroll logging configuration

Command Mode

- /exec

show logging level cert_enroll

show logging level cert_enroll

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

cert_enroll

Show Cert-enroll logging configuration

Command Mode

- /exec

show logging level cfs

show logging level cfs

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

Command Mode

- /exec

show logging level clis

show logging level clis

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

clis

Show CLIS logging configuration

Command Mode

- /exec

show logging level clk_mgr

show logging level clk_mgr

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

clk_mgr

Show clock manager logging configuration

Command Mode

- /exec

show logging level confcheck

show logging level confcheck

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

confcheck

Show confcheck logging configuration

Command Mode

- /exec

show logging level copp

show logging level copp

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

copp

Show copp logging configuration

Command Mode

- /exec

show logging level core

show logging level core

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

core

Show core daemon logging configuration

Command Mode

- /exec

show logging level cts

show logging level cts

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

cts

Show cts logging configuration

Command Mode

- /exec

show logging level dhcp_snoop

show logging level dhcp_snoop

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

dhcp_snoop

Show DHCP snoop logging configuration

Command Mode

- /exec

show logging level diagnostic device_test

show logging level diagnostic device_test

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

diagnostic

Diagnostic commands

device_test

Show device_test logging configuration

Command Mode

- /exec

show logging level diagnostic diagclient

show logging level diagnostic diagclient

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

diagnostic

Diagnostic commands

diagclient

Show diagclient logging configuration

Command Mode

- /exec

show logging level diagnostic diagmgr

show logging level diagnostic diagmgr

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

diagnostic

Diagnostic commands

diagmgr

Show diagmgr logging configuration

Command Mode

- /exec

show logging level dot1x

show logging level dot1x

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

dot1x

Show dot1x logging configuration

Command Mode

- /exec

show logging level ecp

show logging level ecp

Syntax Description

Syntax Description

show

Show running system information

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ecp

Set syslog filter level for ECP

Command Mode

- /exec

show logging level eigrp

show logging level eigrp [ <eigrp-ptag> ]

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

eigrp

Show EIGRP logging configuration

eigrp-ptag

(Optional) Process tag

Command Mode

- /exec

show logging level eltm

show logging level eltm

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

eltm

Show eltm logging configuration

Command Mode

- /exec

show logging level ethdstats

show logging level ethdstats

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ethdstats

Show delta statistics logging configuration

Command Mode

- /exec

show logging level ethpm

show logging level ethpm

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ethpm

Show ethpm logging configuration

Command Mode

- /exec

show logging level evb

show logging level evb

Syntax Description

Syntax Description

show

Show running system information

logging

Modify message logging facilities

level

Facility parameter for syslog messages

evb

Set syslog filter level for EVB

Command Mode

- /exec

show logging level evmc

show logging level evmc

Syntax Description

Syntax Description

show

Show running system information

logging

Show message logging facilities

level

Show facility logging configuration

evmc

Show level for evmc syslog messages

Command Mode

- /exec

show logging level evmed

show logging level evmed

Syntax Description

Syntax Description

show

Show running system information

logging

Show message logging facilities

level

Show facility logging configuration

evmed

Show level for evmed syslog messages

Command Mode

- /exec

show logging level evms

show logging level evms

Syntax Description

Syntax Description

show

Show running system information

logging

Show message logging facilities

level

Show facility logging configuration

evms

Show level for evms syslog messages

Command Mode

- /exec

show logging level fabric forwarding

show logging level fabric forwarding

Syntax Description

Syntax Description

show

Show running system information

logging

Modify message logging facilities

level

Facility parameter for syslog messages

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

Command Mode

- /exec

show logging level feature-mgr

show logging level feature-mgr

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

feature-mgr

Show feature manager logging configuration

Command Mode

- /exec

show logging level fs-daemon

show logging level fs-daemon

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

fs-daemon

Show fs-daemon logging configuration

Command Mode

- /exec

show logging level glbp

show logging level glbp

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

glbp

Show glbp logging settings

Command Mode

- /exec

show logging level gpixm

show logging level gpixm

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

gpixm

Show global-pixm logging configuration

Command Mode

- /exec

show logging level hsrp

show logging level hsrp

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

hsrp

Show HSRP logging configuration

Command Mode

- /exec

show logging level icam

show logging level icam

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

icam

Show icam logging configuration

Command Mode

- /exec

show logging level im

show logging level im

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

im

Show im logging configuration

Command Mode

- /exec

show logging level imp

show logging level imp

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

imp

Show imp logging configuration

Command Mode

- /exec

show logging level interface-vlan

show logging level interface-vlan

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

interface-vlan

Show interface-vlan logging configuration

Command Mode

- /exec

show logging level ip igmp

show logging level ip igmp

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ip

Display IP information

igmp

Show igmp logging configuration

Command Mode

- /exec

show logging level ip msdp

show logging level ip msdp

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ip

Display IP information

msdp

Show msdp logging configuration

Command Mode

- /exec

show logging level ip pim

show logging level ip pim

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ip

Display IP information

pim

Show pim logging configuration

Command Mode

- /exec

show logging level ip sla responder

show logging level ip sla responder

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ip

sla

Service Level Agreement (SLA)

responder

Show sla-responder logging configuration

Command Mode

- /exec

show logging level ip sla sender

show logging level ip sla sender

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ip

sla

Service Level Agreement (SLA)

sender

Show sla-sender logging configuration

Command Mode

- /exec

show logging level ipconf

show logging level ipconf [ ipv6 ]

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ipconf

Show ipconf logging configuration

ipv6

(Optional) Show ipv6 Conf logging configuration

Command Mode

- /exec

show logging level ipfib

show logging level ipfib

Syntax Description

Syntax Description

show

show

logging

logging

level

level

ipfib

ipfib

Command Mode

- /exec

show logging level ipqos

show logging level ipqos

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

Command Mode

- /exec

show logging level ipv6 icmp

show logging level ipv6 icmp

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ipv6

Configure IPv6 features

icmp

Show icmpv6 logging configuration

Command Mode

- /exec

show logging level iscm

show logging level iscm

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

iscm

Show iscm logging configuration

Command Mode

- /exec

show logging level iscm

show logging level iscm

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

iscm

Show iscm logging configuration

Command Mode

- /exec

show logging level isis

show logging level isis

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

isis

Show ISIS logging configuration

Command Mode

- /exec

show logging level keystore

show logging level { keystore | sksd }

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

keystore

Show Keystore logging configuration

sksd

show Keystore/sksd logging configuration

Command Mode

- /exec

show logging level l2fm

show logging level l2fm

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

l2fm

Show l2fm logging configuration

Command Mode

- /exec

show logging level l3vm

show logging level l3vm

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

l3vm

Show L3VM logging configuration

Command Mode

- /exec

show logging level lacp

show logging level lacp

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

lacp

Show lacp logging configuration

Command Mode

- /exec

show logging level ldap

show logging level ldap

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ldap

Show ldap logging configuration

Command Mode

- /exec

show logging level license

show logging level { license | licmgr }

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

license

Show Licensing logging configuration

licmgr

Show Licensing logging configuration

Command Mode

- /exec

show logging level lim

show logging level lim

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

lim

Show lim logging configuration

Command Mode

- /exec

show logging level lisp

show logging level lisp

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

lisp

Show lisp logging configuration

Command Mode

- /exec

show logging level lldp

show logging level lldp

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

lldp

Show LLDP logging configuration

Command Mode

- /exec

show logging level mmode

show logging level mmode

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

mmode

Show maintenance mode logging configuration

Command Mode

- /exec

show logging level module

show logging level module

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

module

Show module(linecard) manager logging configuration

Command Mode

- /exec

show logging level monitor

show logging level monitor

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

monitor

Show monitor logging configuration

Command Mode

- /exec

show logging level mpls ldp

show logging level mpls ldp

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

mpls

Display MPLS status and configuration

ldp

Show LDP logging configuration

Command Mode

- /exec

show logging level mpls manager

show logging level mpls manager

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

mpls

Show MPLS logging configuration

manager

Show MPLS manager logging configuration

Command Mode

- /exec

show logging level mpls switching

show logging level mpls switching

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

mpls

Show MPLS logging configuration

switching

Show mpls switching logging configuration

Command Mode

- /exec

show logging level mpls traffic-eng

show logging level mpls traffic-eng

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

mpls

Display MPLS status and configuration

traffic-eng

Show Traffic Engineering logging configuration

Command Mode

- /exec

show logging level mvsh

show logging level mvsh

Syntax Description

Syntax Description

show

Show commands

logging

Show message logging facilities

level

Show message logging facilities

mvsh

Show level for mvsh syslog messages

Command Mode

- /exec

show logging level nat

show logging level nat

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

nat

Show NAT logging configurarion

Command Mode

- /exec

show logging level nbm

show logging level nbm

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

nbm

Show Non Blocking Multicast logging configuration

Command Mode

- /exec

show logging level netstack

show logging level netstack

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

netstack

Show netstack logging configuration

Command Mode

- /exec

show logging level nfm

show logging level nfm

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

nfm

Show NFM logging configuration

Command Mode

- /exec

show logging level ngoam

show logging level ngoam

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ngoam

Show ngoam logging level

Command Mode

- /exec

show logging level ntp

show logging level ntp

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ntp

Show NTP logging settings.

Command Mode

- /exec

show logging level nve

show logging level nve

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

nve

Show NVE logging configuration

Command Mode

- /exec

show logging level nxsdk

show logging level nxsdk

Syntax Description

Syntax Description

show

Show running system information

logging

Modify message logging facilities

level

Facility parameter for syslog messages

nxsdk

NXOS SDK

Command Mode

- /exec

show logging level onep

show logging level onep

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

onep

One Platform

Command Mode

- /exec

show logging level openflow

show logging level openflow

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

openflow

Show OpenFlow agent logging configuration

Command Mode

- /exec

show logging level ospf

show logging level ospf

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ospf

Show OSPF logging configuration

Command Mode

- /exec

show logging level ospfv3

show logging level ospfv3

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ospfv3

Display OSPFv3 status and configuration

Command Mode

- /exec

show logging level otv

show logging level otv

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

otv

Show OTV logging configuration

Command Mode

- /exec

show logging level otv isis

show logging level otv isis

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

otv

Show OTV ISIS logging configuration

isis

Show OTV ISIS logging configuration

Command Mode

- /exec

show logging level pfstat

show logging level pfstat

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

pfstat

Show pfstat logging configuration

Command Mode

- /exec

show logging level pim

show logging level [ ipv6 ] pim

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ipv6

(Optional) Display IPv6 information

pim

Show pim6 logging configuration

Command Mode

- /exec

show logging level pixm

show logging level pixm

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

pixm

Show vdc-local-pixm logging configuration

Command Mode

- /exec

show logging level pktmgr

show logging level pktmgr

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

pktmgr

Show pktmgr logging configuration

Command Mode

- /exec

show logging level platform

show logging level platform

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

platform

Show platform logging configuration

Command Mode

- /exec

show logging level plbm

show logging level plbm

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

plbm

Show plbm logging configuration

Command Mode

- /exec

show logging level plcmgr

show logging level plcmgr

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

Command Mode

- /exec

show logging level pltfm_config

show logging level pltfm_config

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

pltfm_config

Show pltfm_config logging configuration

Command Mode

- /exec

show logging level plugin

show logging level plugin

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

plugin

Show plugin logging configuration

Command Mode

- /exec

show logging level poap

show logging level poap

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

poap

Show poap logging configuration

Command Mode

- /exec

show logging level port-profile

show logging level port-profile

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

port-profile

Show syslog level for port-profile

Command Mode

- /exec

show logging level port-security

show logging level port-security

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

port-security

Show port-security logging configuration

Command Mode

- /exec

show logging level private-vlan

show logging level private-vlan

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

private-vlan

Show interface-vlan logging configuration

Command Mode

- /exec

show logging level ptp

show logging level ptp

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ptp

Show ptp logging configuration

Command Mode

- /exec

show logging level radius

show logging level radius

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

radius

Show radius logging configuration

Command Mode

- /exec

show logging level res_mgr

show logging level res_mgr

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

res_mgr

Show res_mgr logging configuration

Command Mode

- /exec

show logging level rip

show logging level rip

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

rip

Show RIP logging configuration

Command Mode

- /exec

show logging level rpm

show logging level rpm

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

rpm

Show RPM logging configuration

Command Mode

- /exec

show logging level rsvp

show logging level rsvp

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

rsvp

Show RSVP logging configuration

Command Mode

- /exec

show logging level scheduler

show logging level scheduler

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

scheduler

Show scheduler logging configuration

Command Mode

- /exec

show logging level security

show logging level security

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

security

Show security logging configuration

Command Mode

- /exec

show logging level session-mgr

show logging level session-mgr

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

session-mgr

Show session-mgr logging configurarion

Command Mode

- /exec

show logging level sflow

show logging level sflow

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

sflow

Show sFlow logging configuration

Command Mode

- /exec

show logging level smartc

show logging level smartc

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

smartc

Show smartc logging configuration

Command Mode

- /exec

show logging level smm

show logging level smm

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

smm

Show Shared Memory Manager logging configuration

Command Mode

- /exec

show logging level snmpd

show logging level snmpd

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

snmpd

Show SNMP logging configuration

Command Mode

- /exec

show logging level snmpmib_proc

show logging level snmpmib_proc

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

snmpmib_proc

Show snmpmib_proc logging configuration

Command Mode

- /exec

show logging level spanning-tree

show logging level spanning-tree

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

spanning-tree

Show spanning-tree logging configuration

Command Mode

- /exec

show logging level stripcl

show logging level stripcl

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

stripcl

Show stripcl logging configuration

Command Mode

- /exec

show logging level sysmgr

show logging level sysmgr

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

sysmgr

Show sysmgr logging configuration

Command Mode

- /exec

show logging level tacacs

show logging level tacacs

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

tacacs

Show tacacs+ logging configuration

Command Mode

- /exec

show logging level telemetry

show logging level telemetry

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

telemetry

Show telemetry logging level

Command Mode

- /exec

show logging level track

show logging level track

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

track

Show track logging configuration

Command Mode

- /exec

show logging level tunnel

show logging level tunnel

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

tunnel

Show tunnel logging settings

Command Mode

- /exec

show logging level u6rib

show logging level u6rib

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

u6rib

Show U6RIB logging configuration

Command Mode

- /exec

show logging level udld

show logging level udld

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

udld

Show udld logging configuration

Command Mode

- /exec

show logging level urib

show logging level urib

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

urib

Show URIB logging configuration

Command Mode

- /exec

show logging level vdc_mgr

show logging level vdc_mgr

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

vdc_mgr

Show vdc manager logging configuration

Command Mode

- /exec

show logging level virtual-service

show logging level virtual-service

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

virtual-service

Show virtualization manager logging configuration

Command Mode

- /exec

show logging level vmm

show logging level vmm

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

vmm

Show vmm logging configuration

Command Mode

- /exec

show logging level vmtracker

show logging level vmtracker

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

vmtracker

Show vmtracker logging configuration

Command Mode

- /exec

show logging level vpc

show logging level vpc

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

vpc

Show vPC logging configuration

Command Mode

- /exec

show logging level vrrp-cfg

show logging level vrrp-cfg

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

vrrp-cfg

Show vrrp-cfg logging configuration

Command Mode

- /exec

show logging level vrrp-eng

show logging level vrrp-eng

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

vrrp-eng

Show vrrp-eng logging configuration

Command Mode

- /exec

show logging level vrrpv3

show logging level vrrpv3

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

vrrpv3

level for vrrpv3 configuration

Command Mode

- /exec

show logging level vshd

show logging level vshd

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

Command Mode

- /exec

show logging level xbar

show logging level xbar

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

Command Mode

- /exec

show logging logfile

show logging logfile

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

logfile

Show contents of logfile

Command Mode

- /exec

show logging logfile duration

show logging logfile duration <s1>

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

logfile

Show contents of logfile

duration

show messages from logfile of last given duration

s1

Enter hour, minutes, seconds of duration as HH:MM:SS

Command Mode

- /exec

show logging logfile last-index

show logging logfile last-index

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

logfile

Show contents of logfile

last-index

Show the sequence-number of the last message in logfile

Command Mode

- /exec

show logging logfile start-seqn

show logging logfile start-seqn <i0> [ end-seqn <i1> ]

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

logfile

Show contents of logfile

start-seqn

Show messages from logfile from a given start-sequence-number

i0

Enter starting sequence number

end-seqn

(Optional) Show messages from logfile from a given end-sequence-number

i1

(Optional) Enter ending sequence number

Command Mode

- /exec

show logging logfile start-time

show logging logfile start-time <i0> <s0> <i1> <s1> [ end-time <i2> <s2> <i3> <s3> ]

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

logfile

Show contents of logfile

start-time

Show messages from logfile from a given start-time

i0

Enter year in YYYY format

s0

Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec

i1

Enter day of month in dd format

s1

Enter hour, minutes, seconds as HH:MM:SS

end-time

(Optional) Show messages from logfile up to a given end-time

i2

(Optional) Enter year in YYYY format

s2

(Optional) Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec

i3

(Optional) Enter day of month in dd format

s3

(Optional) Enter hour, minutes, seconds as HH:MM:SS

Command Mode

- /exec

show logging loopback

show logging loopback

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

loopback

Show logging loopback configuration

Command Mode

- /exec

show logging module

show logging module

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

module

Show module(linecard) logging configuration

Command Mode

- /exec

show logging monitor

show logging monitor

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

monitor

Show monitor logging configuration

Command Mode

- /exec

show logging nvram

show logging nvram [ [ { last <i0> } ] [ __readonly__ [ <error> ] [ { TABLE_nvram <log> } ] ] ]

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

nvram

Show NVRAM log

last

(Optional) Show last few lines of nvram log

i0

(Optional) Enter number of lines to display

__readonly__

(Optional)

error

(Optional) error message

TABLE_nvram

(Optional) nvram log prints

log

(Optional) single log line

Command Mode

- /exec

show logging onboard

show logging onboard { counter-stats | endtime <s0> [ { counter-stats | internal { <dc3_options> } } ] | internal { <dc3_options> } | module <module> { counter-stats | endtime1 <s1> [ { counter-stats | internal { <dc3_options> } } ] | internal { <dc3_options> } | starttime <s2> [ { counter-stats | endtime2 <s3> [ { counter-stats | internal { <dc3_options> } } ] | internal { <dc3_options> } } ] } | starttime1 <s4> [ { counter-stats | endtime3 <s5> [ { counter-stats | internal { <dc3_options> } } ] | internal { <dc3_options> } } ] }

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

onboard

Show OBFL information

counter-stats

Show OBFL counter statistics

endtime

Show OBFL logs till end time mm/dd/yy-HH:MM:SS

s0

End time format - mm/dd/yy-HH:MM:SS

internal

(Optional) Show Logging Onboard Internal

module

Show OBFL information for Module

module

Enter module number

endtime1

Show OBFL logs till end time mm/dd/yy-HH:MM:SS

s1

End time format - mm/dd/yy-HH:MM:SS

starttime

Show OBFL logs from start time mm/dd/yy-HH:MM:SS

s2

Start time format - mm/dd/yy-HH:MM:SS

endtime2

(Optional) Show OBFL logs till end time mm/dd/yy-HH:MM:SS

s3

(Optional) End time format - mm/dd/yy-HH:MM:SS

starttime1

Show OBFL logs from start time mm/dd/yy-HH:MM:SS

s4

Start time format - mm/dd/yy-HH:MM:SS

endtime3

(Optional) Show OBFL logs till end time mm/dd/yy-HH:MM:SS

s5

(Optional) End time format - mm/dd/yy-HH:MM:SS

dc3_options

(Optional) dc3 options

Command Mode

- /exec

show logging onboard

show logging onboard [ card-first-power-on | card-boot-history | <common_options> | endtime <s0> [ { <common_options> | error-stats [ port <i0> ] } ] | error-stats [ port1 <i1> ] | module <module> [ <common_options> | endtime1 <s1> [ { <common_options> | error-stats [ port3 <i3> ] } ] | error-stats [ port4 <i4> ] | starttime <s2> [ { <common_options> | endtime2 <s3> [ { <common_options> | error-stats [ port6 <i6> ] } ] | error-stats [ port7 <i7> ] } ] | card-first-power-on | card-boot-history ] | obfl-logs | starttime1 <s4> [ { <common_options> | endtime3 <s5> [ { <common_options> | error-stats [ port8 <i8> ] } ] | error-stats [ port9 <i9> ] } ] | credit-loss [ module <module> [ last <last_no> { minutes | hours | days } ] | last <last_no> { minutes | hours | days } ] | flow-control { pause-count [ module <module> [ last <last_no> { minutes | hours | days } ] | last <last_no> { minutes | hours | days } ] | pause-events [ module <module> [ last <last_no> { minutes | hours | days } ] | last <last_no> { minutes | hours | days } ] | request-timeout [ module <module> ] | timeout-drops [ module <module> [ port10 <i10> [ last <last_no> { minutes | hours | days } ] | last <last_no> { minutes | hours | days } ] | last <last_no> { minutes | hours | days } ] } ]

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

onboard

Show OBFL information

card-first-power-on

(Optional) show card first power on information

card-boot-history

(Optional) show card boot history

endtime

(Optional) Show OBFL logs till end time mm/dd/yy-HH:MM:SS

s0

(Optional) End time format - mm/dd/yy-HH:MM:SS

error-stats

(Optional) Show OBFL error statistics

port

(Optional) Show OBFL error statistics for a port

i0

(Optional)

common_options

(Optional) give the options

port1

(Optional) Show OBFL error statistics for a port

i1

(Optional)

module

(Optional) Show OBFL information for Module

module

(Optional) Enter module number

endtime1

(Optional) Show OBFL logs till end time mm/dd/yy-HH:MM:SS

s1

(Optional) End time format - mm/dd/yy-HH:MM:SS

port3

(Optional) Show OBFL error statistics for a port

i3

(Optional)

port4

(Optional) Show OBFL error statistics for a port

i4

(Optional)

starttime

(Optional) Show OBFL logs from start time mm/dd/yy-HH:MM:SS

s2

(Optional) Start time format - mm/dd/yy-HH:MM:SS

endtime2

(Optional) Show OBFL logs till end time mm/dd/yy-HH:MM:SS

s3

(Optional) End time format - mm/dd/yy-HH:MM:SS

port6

(Optional) Show OBFL error statistics for a port

i6

(Optional)

port7

(Optional) Show OBFL error statistics for a port

i7

(Optional)

starttime1

(Optional) Show OBFL logs from start time mm/dd/yy-HH:MM:SS

s4

(Optional) Start time format - mm/dd/yy-HH:MM:SS

endtime3

(Optional) Show OBFL logs till end time mm/dd/yy-HH:MM:SS

s5

(Optional) End time format - mm/dd/yy-HH:MM:SS

port8

(Optional) Show OBFL error statistics for a port

i8

(Optional)

port9

(Optional) Show OBFL error statistics for a port

i9

(Optional)

obfl-logs

(Optional) Show OBFL Tech Support Log.

timeout-drops

(Optional) Show OBFL Timeout Drops logs

port10

(Optional) Show OBFL statistics per port basis

i10

(Optional)

credit-loss

(Optional) Show OBFL Credit Loss logs

last

(Optional) Show last min/hour/day logs

last_no

(Optional) Duration in min/hrs/day

minutes

(Optional) entry in minutes

hours

(Optional) entry in hours

days

(Optional) entry in days

request-timeout

(Optional) Show OBFL request timeout log

flow-control

(Optional) Show OBFL Flow Control log

pause-count

(Optional) Show Flow Control Pause Count Logs

pause-events

(Optional) Show Flow Control Pause Event Logs

Command Mode

- /exec

show logging onboard kernel-trace

show logging onboard kernel-trace

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

onboard

Show OBFL information

kernel-trace

Show OBFL Kernel Trace

Command Mode

- /exec

show logging origin-id

show logging origin-id

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

origin-id

Show logging origin id configuration

Command Mode

- /exec

show logging pending-diff

show logging pending-diff

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

pending-diff

server address pending configuration diff

Command Mode

- /exec

show logging pending

show logging pending

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

pending

server address pending configuration

Command Mode

- /exec

show logging server

show logging server [ __readonly__ [ <noentry> ] [ { TABLE_logserv <server> <forwarding> <severity> <facility> <vrf> <port> } ] ]

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

server

Show server logging configuration

__readonly__

(Optional)

noentry

(Optional) logging server not configured

TABLE_logserv

(Optional) output of show logging server

server

(Optional) remote server address

forwarding

(Optional) remote server forwarding

severity

(Optional) remote server severity

facility

(Optional) remote server facility

vrf

(Optional) remote server vrf

port

(Optional) remote server port

Command Mode

- /exec

show logging session status

show logging session status

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

session

Show logging session status

status

Show logging session status

Command Mode

- /exec

show logging source-interface

show logging source-interface

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

source-interface

Show logging source-interface configuration

Command Mode

- /exec

show logging status

show logging status

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

status

Show logging status

Command Mode

- /exec

show logging timestamp

show logging timestamp

Syntax Description

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

timestamp

Show logging timestamp configuration

Command Mode

- /exec

show login on-failure log

show login on-failure log [ __readonly__ [ <status> ] ]

Syntax Description

Syntax Description

show

show

login

login

on-failure

authentication failure

log

Log

__readonly__

(Optional)

status

(Optional) login on failure log enabled or disabled

Command Mode

- /exec

show login on-successful log

show login on-successful log [ __readonly__ [ <status> ] ]

Syntax Description

Syntax Description

show

show

login

login

on-successful

authentication successful

log

Log

__readonly__

(Optional)

status

(Optional) login on successful log enabled or disabled

Command Mode

- /exec

Chapter 13. M Show Commands

- show mac-list

- show mac address-table multicast

- show mac vdc

- show macsec mka

- show macsec mka session

- show macsec mka statistics

- show macsec policy

- show macsec secy statistics

- show maintenance on-reload reset-reasons

- show maintenance profile

- show maintenance snapshot-delay

- show maintenance timeout

- show mgmt-policy

- show module

- show module bandwidth-fairness

- show module internal activity

- show module internal all

- show module internal errors

- show module internal event-history

- show module internal event-history module1

- show module internal event-history stats

- show module internal exceptionlog

- show module internal exceptionlog internal1 event-history all

- show module internal exceptionlog internal1 event-history errors

- show module internal exceptionlog internal1 event-history msgs

- show module internal exceptionlog module1

- show module internal info

- show module internal lock

- show module internal mem-stats

- show module internal msgs

- show module internal sequence lc

- show module internal sequence sup

- show module internal sw info

- show module supported

- show module uptime

- show monitor internal errors

- show monitor internal event-history debug

- show monitor internal event-history global

- show monitor internal event-history msgs

- show monitor internal info

- show monitor internal lock

- show monitor internal logs

- show monitor internal mem-stats

- show mpls forwarding statistics

- show mpls interfaces

- show mpls interfaces detail

- show mpls interfaces internal

- show mpls interfaces statistics

- show mpls ip bindings

- show mpls ip ttl

- show mpls label range

- show mpls label statistics

- show mpls ldp backoff

- show mpls ldp bindings

- show mpls ldp bindings summary

- show mpls ldp capabilities

- show mpls ldp checkpoint

- show mpls ldp discovery

- show mpls ldp graceful-restart

- show mpls ldp igp sync

- show mpls ldp internal

- show mpls ldp internal event-history dev

- show mpls ldp internal event-history errors

- show mpls ldp internal event-history msgs

- show mpls ldp internal event-history transport connection

- show mpls ldp internal mem-stats

- show mpls ldp internal route

- show mpls ldp neighbor

- show mpls ldp parameters

- show mpls oam echo statistics

- show mpls oam internal mem-stats

- show mpls static binding

- show mpls static binding

- show mpls static binding vrf per-vrf

- show mpls static internal rnh

- show mpls static trace

- show mpls strip internal

- show mpls strip labels

- show mpls switching

- show mpls switching clients

- show mpls switching internal client

- show mpls switching internal distribution

- show mpls switching internal dynamicbf

- show mpls switching internal event-history

- show mpls switching internal feature

- show mpls switching internal fec

- show mpls switching internal fec label

- show mpls switching internal holddownbf

- show mpls switching internal lbr

- show mpls switching internal mem-stats

- show mpls switching internal staticbf

- show mpls traffic-eng

- show mpls traffic-eng

- show mpls traffic-eng autoroute

- show mpls traffic-eng exp

- show mpls traffic-eng explicit-paths

- show mpls traffic-eng forwarding-adjacency

- show mpls traffic-eng high-availability

- show mpls traffic-eng internal

- show mpls traffic-eng internal event-history mts

- show mpls traffic-eng link-management

- show mpls traffic-eng link-management advertisements

- show mpls traffic-eng link-management bandwidth-allocation

- show mpls traffic-eng link-management igp-neighbors ip

- show mpls traffic-eng link-management igp-neighbors igp-id isis

- show mpls traffic-eng link-management igp-neighbors

- show mpls traffic-eng link-management statistics

- show mpls traffic-eng lsp attributes

- show mpls traffic-eng topology

- show mpls traffic-eng topology path

- show mpls traffic-eng tunnels

- show mpls traffic-eng tunnels internal

- show mpls traffic-eng tunnels statistics internal

- show mvpn bgp mdt

- show mvpn internal ha

- show mvpn internal mrib

- show mvpn internal state

- show mvpn mdt encap

- show mvpn mdt route

- show mvpn snmp mib genericTable

- show mvpn snmp mib mvpnBgpMdtUpdateTable

- show mvpn snmp mib mvpnMdtDataTable

- show mvpn snmp mib mvpnMdtDefaultTable

- show mvpn snmp mib mvpnMdtJnRcvTable

- show mvpn snmp mib mvpnMdtJnSendTable

- show mvpn snmp mib mvpnMrouteMdtTable

- show mvpn snmp mib mvpnMvrfNumber

- show mvpn snmp mib mvpnNotificationEnable

- show mvpn snmp mib mvpnTunnelTable

show mac-list

show mac-list { [ <mac_list_name> [ { seq <seq_no> | { <mac_addr> [ <mac_mask> ] } } ] ] } [ __readonly__ TABLE_mac_list <name> <seq> <action> <rule> ]

Syntax Description

Syntax Description

show

Show running system information

mac-list

Show mac-lists

mac_list_name

(Optional) Name of mac list

seq

(Optional) Sequence number

seq_no

(Optional) Sequence number

mac_addr

(Optional) MAC address

mac_mask

(Optional) MAC mask

__readonly__

(Optional)

TABLE_mac_list

(Optional)

name

(Optional)

seq

(Optional)

action

(Optional)

rule

(Optional)

Command Mode

- /exec

show mac address-table multicast

show mac address-table multicast [ vlan <vlan> ] [ __readonly__ { TABLE_vlan <vlan-id> <mac-addr> <type> <age> <oifs> } ]

Syntax Description

Syntax Description

show

Show running system information

mac

MAC configuration commands

address-table

MAC Address Table

multicast

Multicast MAC Table entries

vlan

(Optional) VLAN/BD

vlan

(Optional) VLAN/BD

__readonly__

(Optional)

TABLE_vlan

(Optional)

vlan-id

(Optional)

mac-addr

(Optional)

type

(Optional)

age

(Optional)

oifs

(Optional)

Command Mode

- /exec

show mac vdc

show mac vdc <vdc_id> [ __readonly__ <vdc_id> <mac_address> ]

Syntax Description

Syntax Description

show

show

mac

show management port mac address of the given vdc

vdc

show management port mac address of this vdc id

vdc_id

please enter vdc id

__readonly__

(Optional)

vdc_id

(Optional)

mac_address

(Optional)

Command Mode

- /exec

show macsec mka

show macsec mka [ summary ] [ __readonly__ { TABLE_mka_summary <ifname> <status> <cipher> <keyserver> <policy> <keychain> } ]

Syntax Description

Syntax Description

show

Show running system information

macsec

Show MACSEC information

mka

Show MKA information

summary

(Optional) Show MKA summary information

__readonly__

(Optional)

TABLE_mka_summary

(Optional)

ifname

(Optional) Interface

status

(Optional) MACSEC Session status

cipher

(Optional) Operational MACSEC Cipher-suite

keyserver

(Optional) Is this acting as interface key-server

policy

(Optional) MACSEC Policy applied to interface

keychain

(Optional) Keychain associated with interface

Command Mode

- /exec

show macsec mka session

show macsec mka session [ interface <ifname> ] [ details ] [ __readonly__ [ TABLE_mka_session <ifname> <sci> <peers> <status> <keyserver> ] [ <sessions> <active_sessions> <pending_sessions> ] [ TABLE_mka_session_details <ifname> <status> <sci> <ssci> <port_id> <ckn> <mi> <mn> <policy> <ks_prio> <keyserver> <cipher> <cipher_operational> <window> <conf_offset> <conf_offset_operational> <sak_status> <sak_an> <sak_ki> <sak_kn> <last_sak_rekey_time> ] ]

Syntax Description

Syntax Description

show

Show running system information

macsec

Show MACSEC information

mka

Show MKA information

session

Show MKA session information

interface

(Optional) Specify interface

ifname

(Optional) Interface list

details

(Optional) Show MKA detailed information

__readonly__

(Optional)

TABLE_mka_session

(Optional)

ifname

(Optional) Interface

sci

(Optional) Interface local TxSCI

peers

(Optional) Number of Peers

status

(Optional) Macsec status of Interface

keyserver

(Optional) Interface keyserver

TABLE_mka_session_details

(Optional)

ifname

(Optional) Interface

status

(Optional) Session Status

sci

(Optional) Interface local TxSCI

ssci

(Optional) Interface local TxSSCI

port_id

(Optional) MKA Port Identifier

ckn

(Optional) CAK Name

mi

(Optional) Member Identifier

mn

(Optional) Message Number

policy

(Optional) MACSEC Policy

ks_prio

(Optional) Key-server Priority

keyserver

(Optional) Key-server

cipher

(Optional) MKA Cipher Suite

cipher_operational

(Optional) MKA Cipher Suite Operational

window

(Optional) Replay Window Size

conf_offset

(Optional) Confidentiality Offset

conf_offset_operational

(Optional) Confidentiality Offset Operational

sak_status

(Optional) SAK Status

sak_an

(Optional) SAK AN

sak_ki

(Optional) SAK KI

sak_kn

(Optional) SAK KN

last_sak_rekey_time

(Optional) Last SAK rekey

sessions

(Optional) Total number of Sessions

active_sessions

(Optional) Count of Active Sessions

pending_sessions

(Optional) Count of Pending Sessions

Command Mode

- /exec

show macsec mka statistics

show macsec mka statistics [ interface <ifname> ] [ __readonly__ [ TABLE_mka_intf_stats [ [ <ifname2> ] [ TABLE_ca_stats [ [ <ca_stat_ckn> ] [ <ca_stat_pairwise_cak_rekey> ] [ <sa_stat_sak_generated> ] [ <sa_stat_sak_rekey> ] [ <sa_stat_sak_received> ] [ <sa_stat_sak_response_rx> ] [ <mkpdu_stat_mkpdu_tx> ] [ <mkpdu_stat_mkpdu_tx_distsak> ] [ <mkpdu_stat_mkpdu_rx> ] [ <mkpdu_stat_mkpdu_rx_distsak> ] ] ] [ TABLE_idb_stats [ [ <ca_stat_pairwise_cak_rekey> ] [ <sa_stat_sak_generated> ] [ <sa_stat_sak_rekey> ] [ <sa_stat_sak_received> ] [ <sa_stat_sak_response_rx> ] [ <mkpdu_stat_mkpdu_tx> ] [ <mkpdu_stat_mkpdu_tx_distsak> ] [ <mkpdu_stat_mkpdu_rx> ] [ <mkpdu_stat_mkpdu_rx_distsak> ] [ <idb_stat_mkpdu_tx_success> ] [ <idb_stat_mkpdu_tx_fail> ] [ <idb_stat_mkpdu_tx_pkt_build_fail> ] [ <idb_stat_mkpdu_no_tx_on_intf_down> ] [ <idb_stat_mkpdu_no_rx_on_intf_down> ] [ <idb_stat_mkpdu_rx_ca_notfound> ] [ <idb_stat_mkpdu_rx_error> ] [ <idb_stat_mkpdu_rx_success> ] [ <idb_stat_mkpdu_failure_rx_integrity_check_error> ] [ <idb_stat_mkpdu_failure_invalid_peer_mn_error> ] [ <idb_stat_mkpdu_failure_nonrecent_peerlist_mn_error> ] [ <idb_stat_mkpdu_failure_sakuse_kn_mismatch_error> ] [ <idb_stat_mkpdu_failure_sakuse_rx_not_set_error> ] [ <idb_stat_mkpdu_failure_sakuse_key_mi_mismatch_error> ] [ <idb_stat_mkpdu_failure_sakuse_an_not_in_use_error> ] [ <idb_stat_mkpdu_failure_sakuse_ks_rx_tx_not_set_error> ] [ <idb_stat_mkpdu_failure_sakuse_eapol_ethertype_mismatch_error> ] [ <idb_stat_sak_failure_sak_generate_error> ] [ <idb_stat_sak_failure_hash_generate_error> ] [ <idb_stat_sak_failure_sak_encryption_error> ] [ <idb_stat_sak_failure_sak_decryption_error> ] [ <idb_stat_sak_failure_ick_derivation_error> ] [ <idb_stat_sak_failure_kek_derivation_error> ] [ <idb_stat_sak_failure_invalid_macsec_capability_error> ] [ <idb_stat_macsec_failure_rx_sa_create_error> ] [ <idb_stat_macsec_failure_tx_sa_create_error> ] ] ] ] [ TABLE_mka_gbl_stats [ [ <session_secured> ] [ <session_deleted> ] [ <session_keepalive_timeout> ] [ <ca_stat_pairwise_cak_rekey> ] [ <sa_stat_sak_generated> ] [ <sa_stat_sak_rekey> ] [ <sa_stat_sak_received> ] [ <sa_stat_sak_response_rx> ] [ <mkpdu_stat_mkpdu_rx> ] [ <mkpdu_stat_mkpdu_rx_distsak> ] [ <mkpdu_stat_mkpdu_tx> ] [ <mkpdu_stat_mkpdu_tx_distsak> ] [ <mka_error_session_failure_bring_up_error> ] [ <mka_error_sak_failure_sak_generate_error> ] [ <mka_error_sak_failure_hash_generate_error> ] [ <mka_error_sak_failure_sak_encryption_error> ] [ <mka_error_sak_failure_sak_decryption_error> ] [ <mka_error_sak_failure_sak_cipher_mismatch_error> ] [ <mka_error_ca_failure_ick_derivation_error> ] [ <mka_error_ca_failure_kek_derivation_error> ] [ <mka_error_ca_failure_invalid_macsec_capability_error> ] [ <mka_error_macsec_failure_rx_sa_create_error> ] [ <mka_error_macsec_failure_tx_sa_create_error> ] [ <mka_error_mkpdu_failure_mkpdu_tx_error> ] [ <mka_error_mkpdu_failure_mkpdu_rx_integrity_check_error> ] [ <mka_error_mkpdu_failure_mkpdu_invalid_peer_mn_error> ] [ <mka_error_mkpdu_failure_mkpdu_nonrecent_peerlist_mn_error> ] [ <mka_error_mkpdu_failure_sakuse_kn_mismatch_error> ] [ <mka_error_mkpdu_failure_sakuse_rx_not_set_error> ] [ <mka_error_mkpdu_failure_sakuse_key_mi_mismatch_error> ] [ <mka_error_mkpdu_failure_sakuse_an_not_in_use_error> ] [ <mka_error_mkpdu_failure_sakuse_ks_rx_tx_not_set_error> ] [ <global_stats_mkpdu_rx_invalid_ckn> ] [ <global_stats_mkpdu_tx_pkt_build_fail> ] ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

macsec

Show MACSEC information

mka

Show MKA information

statistics

Show MKA statistics

interface

(Optional) Specify interface

ifname

(Optional) Interface list

__readonly__

(Optional)

TABLE_mka_intf_stats

(Optional) MKA Interface statistics

TABLE_ca_stats

(Optional) CA Statistics

ca_stat_ckn

(Optional) CA Statistics CKN

ca_stat_pairwise_cak_rekey

(Optional) CA Statistics Pairwise CAK Rekey

sa_stat_sak_generated

(Optional) SA Statistics SAK generated

sa_stat_sak_rekey

(Optional) SA Statistics SAK rekey

sa_stat_sak_received

(Optional) SA Statistics SAK received

sa_stat_sak_response_rx

(Optional) SA Statistics SAK response received

mkpdu_stat_mkpdu_tx

(Optional) MKPDU Statistics MKPDU Tx

mkpdu_stat_mkpdu_tx_distsak

(Optional) MKPDU Statistics MKPDU Tx distributed SAK

mkpdu_stat_mkpdu_rx

(Optional) MKPDU Statistics MKPDU Rx

mkpdu_stat_mkpdu_rx_distsak

(Optional) MKPDU Statistics MKPDU Rx distributed SAK

TABLE_idb_stats

(Optional) IDB Statistics

ca_stat_pairwise_cak_rekey

(Optional) CA Statistics pairwise CAK rekey

sa_stat_sak_generated

(Optional) SA Statistics SAK generated

sa_stat_sak_rekey

(Optional) SA Statistics SAK rekey

sa_stat_sak_received

(Optional) SA Statistics SAK received

sa_stat_sak_response_rx

(Optional) SA Statistics SAK response received

mkpdu_stat_mkpdu_tx

(Optional) MKPDU Statistics MKPDU Tx

mkpdu_stat_mkpdu_tx_distsak

(Optional) MKPDU Statistics MKPDU Tx distributed SAK

mkpdu_stat_mkpdu_rx

(Optional) MKPDU Statistics MKPDU Rx

mkpdu_stat_mkpdu_rx_distsak

(Optional) MKPDU Statistics MKPDU Rx distributed SAK

idb_stat_mkpdu_tx_success

(Optional) IDB Statistics MKPDU Tx success

idb_stat_mkpdu_tx_fail

(Optional) IDB Statistics MKPDU Tx fail

idb_stat_mkpdu_tx_pkt_build_fail

(Optional) IDB Statistics MKPDU Tx packet build fail

idb_stat_mkpdu_no_tx_on_intf_down

(Optional) IDB Statistics MKPDU no Tx on interface down

idb_stat_mkpdu_no_rx_on_intf_down

(Optional) IDB Statistics MKPDU no Rx on interface down

idb_stat_mkpdu_rx_ca_notfound

(Optional) IDB Statistics MKPDU Rx CA not found

idb_stat_mkpdu_rx_error

(Optional) IDB Statistics MKPDU Rx error

idb_stat_mkpdu_rx_success

(Optional) IDB Statistics MKPDU Rx success

idb_stat_mkpdu_failure_rx_integrity_check_error

(Optional) IDB Statistics - MKPDU failure - Rx integrity check error

idb_stat_mkpdu_failure_invalid_peer_mn_error

(Optional) IDB Statistics - MKPDU failure - invalid peer MN error

idb_stat_mkpdu_failure_nonrecent_peerlist_mn_error

(Optional) IDB Statistics - MKPDU failure - non recent peerlist MN error

idb_stat_mkpdu_failure_sakuse_kn_mismatch_error

(Optional) IDB Statistics - MKPDU failure - SAKuse KN mismatch error

idb_stat_mkpdu_failure_sakuse_rx_not_set_error

(Optional) IDB Statistics - MKPDU failure - SAKuse Rx not set error

idb_stat_mkpdu_failure_sakuse_key_mi_mismatch_error

(Optional) IDB Statistics - MKPDU failure - SAKuse key MI mismatch error

idb_stat_mkpdu_failure_sakuse_an_not_in_use_error

(Optional) IDB Statistics - MKPDU failure - SAKuse AN not in use error

idb_stat_mkpdu_failure_sakuse_ks_rx_tx_not_set_error

(Optional) IDB Statistics - MKPDU failure - SAKuse KS Rx Tx not set error

idb_stat_mkpdu_failure_sakuse_eapol_ethertype_mismatch_error

(Optional) IDB Statistics - MKPDU failure - SAKuse EAPOL ethertype mismatch error

idb_stat_sak_failure_sak_generate_error

(Optional) IDB Statistics - SAK failure - SAK generate error

idb_stat_sak_failure_hash_generate_error

(Optional) IDB Statistics - SAK failure - Hash generate error

idb_stat_sak_failure_sak_encryption_error

(Optional) IDB Statistics - SAK failure - SAK encryption error

idb_stat_sak_failure_sak_decryption_error

(Optional) IDB Statistics - SAK failure - SAK decryption error

idb_stat_sak_failure_ick_derivation_error

(Optional) IDB Statistics - SAK failure - ICK derivation error

idb_stat_sak_failure_kek_derivation_error

(Optional) IDB Statistics - SAK failure - KEK derivation error

idb_stat_sak_failure_invalid_macsec_capability_error

(Optional) IDB Statistics - SAK failure - invalid MACsec capability error

idb_stat_macsec_failure_rx_sa_create_error

(Optional) IDB Statistics - SAK failure - Rx SA create error

idb_stat_macsec_failure_tx_sa_create_error

(Optional) IDB Statistics - SAK failure - Tx SA create error

TABLE_mka_gbl_stats

(Optional) MKA Global Statistics

session_secured

(Optional) Session secured

session_deleted

(Optional) Session deleted

session_keepalive_timeout

(Optional) Session keepalive timeout

ca_stat_pairwise_cak_rekey

(Optional) CA Statistics pairwise CAK rekey

sa_stat_sak_generated

(Optional) SA Statistics SAK generated

sa_stat_sak_rekey

(Optional) SA Statistics SAK rekey

sa_stat_sak_received

(Optional) SA Statistics SAK received

sa_stat_sak_response_rx

(Optional) SA Statistics SAK response received

mkpdu_stat_mkpdu_rx

(Optional) MKPDU Statistics MKPDU received

mkpdu_stat_mkpdu_rx_distsak

(Optional) MKPDU Statistics MKPDU received distributed SAK

mkpdu_stat_mkpdu_tx

(Optional) MKPDU Statistics MKPDU transmitted

mkpdu_stat_mkpdu_tx_distsak

(Optional) MKPDU Statistics MKPDU transmitted distributed SAK

mka_error_session_failure_bring_up_error

(Optional) MKA Error - Session failure - Bring up error

mka_error_sak_failure_sak_generate_error

(Optional) MKA Error - SAK failure - SAK generate error

mka_error_sak_failure_hash_generate_error

(Optional) MKA Error - SAK failure - Hash generate error

mka_error_sak_failure_sak_encryption_error

(Optional) MKA Error - SAK failure - SAK encryption error

mka_error_sak_failure_sak_decryption_error

(Optional) MKA Error - SAK failure - SAK decryption error

mka_error_sak_failure_sak_cipher_mismatch_error

(Optional) MKA Error - SAK failure - SAK Cipher mismatch error

mka_error_ca_failure_ick_derivation_error

(Optional) MKA Error - CA failure - ICK derivation error

mka_error_ca_failure_kek_derivation_error

(Optional) MKA Error - CA failure - KEK derivation error

mka_error_ca_failure_invalid_macsec_capability_error

(Optional) MKA Error - CA failure - Invalid MACsec capability error

mka_error_macsec_failure_rx_sa_create_error

(Optional) MKA Error - MACsec failure - Rx SA create error

mka_error_macsec_failure_tx_sa_create_error

(Optional) MKA Error - MACsec failure - Tx SA create error

mka_error_mkpdu_failure_mkpdu_tx_error

(Optional) MKA Error - MKPDU failure - MKPDU Tx error

mka_error_mkpdu_failure_mkpdu_rx_integrity_check_error

(Optional) MKA Error - MKPDU failure - MKPDU Rx integrity check error

mka_error_mkpdu_failure_mkpdu_invalid_peer_mn_error

(Optional) MKA Error - MKPDU failure - invalid peer MN error

mka_error_mkpdu_failure_mkpdu_nonrecent_peerlist_mn_error

(Optional) MKA Error - MKPDU failure - non recent peerlist MN error

mka_error_mkpdu_failure_sakuse_kn_mismatch_error

(Optional) MKA Error - MKPDU failure - SAKuse KN mismatch error

mka_error_mkpdu_failure_sakuse_rx_not_set_error

(Optional) MKA Error - MKPDU failure - SAKuse Rx not set error

mka_error_mkpdu_failure_sakuse_key_mi_mismatch_error

(Optional) MKA Error - MKPDU failure - SAKuse key MI mismatch error

mka_error_mkpdu_failure_sakuse_an_not_in_use_error

(Optional) MKA Error - MKPDU failure - SAKuse AN not in use error

mka_error_mkpdu_failure_sakuse_ks_rx_tx_not_set_error

(Optional) MKA Error - MKPDU failure - SAKuse KS Rx Tx not set error

global_stats_mkpdu_rx_invalid_ckn

(Optional) Global Statistics MKPDU received invalid CKN

global_stats_mkpdu_tx_pkt_build_fail

(Optional) Global Statistics Transmit Pkt build fail

ifname2

(Optional) MACSEC Interface Name

Command Mode

- /exec

show macsec policy

show macsec policy [ <policy_name> ] [ __readonly__ { TABLE_macsec_policy <name> <cipher_suite> <keyserver_priority> <window_size> <conf_offset> <security_policy> <sak-expiry-time> } ]

Syntax Description

Syntax Description

show

Show running system information

macsec

Show MACSEC policy information

policy

Show MACSEC policy information

policy_name

(Optional) Name of MACSEC Policy

__readonly__

(Optional)

TABLE_macsec_policy

(Optional)

name

(Optional) MACSEC Policy Name

cipher_suite

(Optional) Cipher Suite

keyserver_priority

(Optional) KeyServer Priority

window_size

(Optional) Window Size

conf_offset

(Optional) Confidentiality Offset

security_policy

(Optional) Security Policy

sak-expiry-time

(Optional) SAK expiry on time interval

Command Mode

- /exec

show macsec secy statistics

show macsec secy statistics [ interface <ifname> ] [ __readonly__ TABLE_statistics <ifname2> [ <in_pkts_unicast_uncontrolled> ] [ <in_pkts_multicast_uncontrolled> ] [ <in_pkts_broadcast_uncontrolled> ] [ <in_rx_drop_pkts_uncontrolled> ] [ <in_rx_err_pkts_uncontrolled> ] [ <in_pkts_unicast_controlled> ] [ <in_pkts_multicast_controlled> ] [ <in_pkts_broadcast_controlled> ] [ <in_rx_drop_pkts_controlled> ] [ <in_rx_err_pkts_controlled> ] [ <in_octets_uncontrolled> ] [ <in_octets_controlled> ] [ <input_rate_uncontrolled_pps> ] [ <input_rate_uncontrolled_bps> ] [ <input_rate_controlled_pps> ] [ <input_rate_controlled_bps> ] [ <out_pkts_unicast_uncontrolled> ] [ <out_pkts_multicast_uncontrolled> ] [ <out_pkts_broadcast_uncontrolled> ] [ <out_rx_drop_pkts_uncontrolled> ] [ <out_rx_err_pkts_uncontrolled> ] [ <out_pkts_unicast_controlled> ] [ <out_pkts_multicast_controlled> ] [ <out_pkts_broadcast_controlled> ] [ <out_rx_drop_pkts_controlled> ] [ <out_rx_err_pkts_controlled> ] [ <out_octets_uncontrolled> ] [ <out_octets_controlled> ] [ <out_octets_common> ] [ <output_rate_uncontrolled_pps> ] [ <output_rate_uncontrolled_bps> ] [ <output_rate_controlled_pps> ] [ <output_rate_controlled_bps> ] [ <in_pkts_transform_error> ] [ <in_pkts_control> ] [ <in_pkts_untagged> ] [ <in_pkts_no_tag> ] [ <in_pkts_badtag> ] [ <in_pkts_no_sci> ] [ <in_pkts_unknown_sci> ] [ <in_pkts_tagged_ctrl> ] [ <out_pkts_transform_error> ] [ <out_pkts_control> ] [ <out_pkts_untagged> ] [ TABLE_rx_sa_an <rx_sa_an> [ <in_pkts_unchecked> ] [ <in_pkts_delayed> ] [ <in_pkts_late> ] [ <in_pkts_ok> ] [ <in_pkts_invalid> ] [ <in_pkts_not_valid> ] [ <in_pkts_not_using_sa> ] [ <in_pkts_unused_sa> ] [ <in_octets_decrypted> ] [ <in_octets_validated> ] ] [ TABLE_tx_sa_an <tx_sa_an> [ <out_pkts_encrypted_protected> ] [ <out_pkts_too_long> ] [ <out_pkts_sa_not_inuse> ] [ <out_octets_encrypted_protected> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

macsec

Show MACSEC information

secy

Show MACSEC secy entity information

statistics

Show MACSEC secy statistics

interface

(Optional) Specify interface

ifname

(Optional) Interface list

__readonly__

(Optional)

TABLE_statistics

(Optional) MACsec secy statistics

in_pkts_unicast_uncontrolled

(Optional) In Pkts Unicast Uncontrolled

in_pkts_multicast_uncontrolled

(Optional) In Pkts Multicast Uncontrolled

in_pkts_broadcast_uncontrolled

(Optional) In Pkts Broadcast Uncontrolled

in_rx_drop_pkts_uncontrolled

(Optional) In Rx Drop Pkts Uncontrolled

in_rx_err_pkts_uncontrolled

(Optional) In Rx Err Pkts Uncontrolled

in_pkts_unicast_controlled

(Optional) In Pkts Unicast Controlled

in_pkts_multicast_controlled

(Optional) In Pkts Multicast Controlled

in_pkts_broadcast_controlled

(Optional) In Pkts Broadcast Controlled

in_rx_drop_pkts_controlled

(Optional) In Rx Drop Pkts Controlled

in_rx_err_pkts_controlled

(Optional) In Rx Err Pkts Controlled

in_octets_uncontrolled

(Optional) In Octets Uncontrolled

in_octets_controlled

(Optional) In Octets Controlled

input_rate_uncontrolled_bps

(Optional) Input Rate Uncontrolled BPS

input_rate_uncontrolled_pps

(Optional) Input Rate Uncontrolled PPS

input_rate_controlled_bps

(Optional) Input Rate Controlled BPS

input_rate_controlled_pps

(Optional) Input Rate Controlled PPS

out_pkts_unicast_uncontrolled

(Optional) Out Pkts Unicast Uncontrolled

out_pkts_multicast_uncontrolled

(Optional) Out Pkts Multicast Uncontrolled

out_pkts_broadcast_uncontrolled

(Optional) Out Pkts Broadcast Uncontrolled

out_rx_drop_pkts_uncontrolled

(Optional) Out Rx Drop Pkts Uncontrolled

out_rx_err_pkts_uncontrolled

(Optional) Out Rx Err Pkts Uncontrolled

out_pkts_unicast_controlled

(Optional) Out Pkts Unicast Controlled

out_pkts_multicast_controlled

(Optional) Out Pkts Multicast Controlled

out_pkts_broadcast_controlled

(Optional) Out Pkts Broadcast Controlled

out_rx_drop_pkts_controlled

(Optional) Out Rx Drop Pkts Controlled

out_rx_err_pkts_controlled

(Optional) Out Rx Err Pkts Controlled

out_octets_uncontrolled

(Optional) Out Octets Uncontrolled

out_octets_controlled

(Optional) Out Ocets Controlled

out_octets_common

(Optional) Out Octets Common

output_rate_uncontrolled_bps

(Optional) Output Rate Uncontrolled BPS

output_rate_uncontrolled_pps

(Optional) Output Rate Uncontrolled PPS

output_rate_controlled_bps

(Optional) Output Rate Controlled BPS

output_rate_controlled_pps

(Optional) Output Rate Controlled PPS

in_pkts_transform_error

(Optional) In Pkts Transform Error

in_pkts_control

(Optional) In Pkts Control

in_pkts_untagged

(Optional) In Pkts Untagged

in_pkts_no_tag

(Optional) In Pkts No Tag

in_pkts_badtag

(Optional) In Pkts Bad Tag

in_pkts_no_sci

(Optional) In Pkts No SCI

in_pkts_unknown_sci

(Optional) In Pkts Unknown SCI

in_pkts_tagged_ctrl

(Optional) In Pkts Tagged Control

out_pkts_transform_error

(Optional) Out Pkts Transform Error

out_pkts_control

(Optional) Out Pkts Control

out_pkts_untagged

(Optional) Out Pkts Untagged

TABLE_rx_sa_an

(Optional) MACsec secy rx_sa_an statistics

rx_sa_an

(Optional) Rx SA AN

in_pkts_unchecked

(Optional) In Pkts Unchecked

in_pkts_delayed

(Optional) In Pkts Delayed

in_pkts_late

(Optional) In Pkts Late

in_pkts_ok

(Optional) In Pkts OK

in_pkts_invalid

(Optional) In Pkts Invalid

in_pkts_not_valid

(Optional) In Pkts not Valid

in_pkts_not_using_sa

(Optional) In Pkts not using SA

in_pkts_unused_sa

(Optional) In Pkts Unused SA

in_octets_decrypted

(Optional) In Octets Decrypted

in_octets_validated

(Optional) In Octets Validated

TABLE_tx_sa_an

(Optional) MACsec secy tx_sa_an statistics

tx_sa_an

(Optional) Tx SA AN

out_pkts_encrypted_protected

(Optional) Out Pkts Encrypted Protected

out_pkts_too_long

(Optional) Out Pkts too Long

out_pkts_sa_not_inuse

(Optional) Out Pkts SA not in use

out_octets_encrypted_protected

(Optional) Out octets Encrypted Protected

ifname2

(Optional) MACSEC Interface Name

Command Mode

- /exec

show maintenance on-reload reset-reasons

show maintenance on-reload reset-reasons [ __readonly__ [ TABLE_reset_reason <reset_reason> ] <rr_bitmap> ]

Syntax Description

Syntax Description

show

Show running system information

maintenance

maintenance

on-reload

on reload maintenance mode configuration

reset-reasons

system reset reasons

__readonly__

(Optional)

TABLE_reset_reason

(Optional)

rr_bitmap

(Optional) reset reason bitmap

reset_reason

(Optional) system reset reason

Command Mode

- /exec

show maintenance profile

show maintenance profile [ <mode> ] [ __readonly__ TABLE_profile <name> TABLE_cfg <cfg> ]

Syntax Description

Syntax Description

show

Show running system information

maintenance

maintenance

profile

maintenance profile

mode

(Optional)

__readonly__

(Optional)

TABLE_profile

(Optional)

name

(Optional) profile name

TABLE_cfg

(Optional)

cfg

(Optional) profile config

Command Mode

- /exec

show maintenance snapshot-delay

show maintenance snapshot-delay [ __readonly__ <delay> ]

Syntax Description

Syntax Description

show

Show running system information

maintenance

maintenance

snapshot-delay

after_maintenance snapshot delay value

__readonly__

(Optional)

delay

(Optional) delay value in seconds

Command Mode

- /exec

show maintenance timeout

show maintenance timeout [ __readonly__ <timeout> ]

Syntax Description

Syntax Description

show

Show running system information

maintenance

maintenance

timeout

timeout value

__readonly__

(Optional)

timeout

(Optional) timeout value

Command Mode

- /exec

show mgmt-policy

show mgmt-policy { <policy-name> | all } [ __readonly__ { TABLE_mgmt_policy { <mgt-pol-name> [ <source-ip> <source-mask> ] [ <source-ip6> ] [ <src-port-rangestart> <src-port-range-end> ] [ <source-port> ] [ <dst-port-rangestart> <dest-port-range-end> ] [ <dest-port> ] } } ]

Syntax Description

Syntax Description

show

Show running system information

mgmt-policy

PM Management policy

policy-name

Name of the policy

all

Show all policies

__readonly__

(Optional)

TABLE_mgmt_policy

(Optional) Management policy Details

mgt-pol-name

(Optional)

source-ip

(Optional)

source-mask

(Optional)

src-port-rangestart

(Optional)

src-port-range-end

(Optional)

source-port

(Optional)

dst-port-rangestart

(Optional)

dest-port-range-end

(Optional)

dest-port

(Optional)

Command Mode

- /exec

show module

show module [ { <module> } | { <s0> [ <santa-cruz-range> ] } | { fabric [ <module> ] } ] [ __readonly__ { TABLE_modinfo <modinf> <ports> <modtype> <model> <status> } [ { TABLE_modpwrinfo <modpwr> <pwrstat> <reason> } ] { TABLE_modwwninfo <modwwn> <sw> <hw> <slottype> } [ { TABLE_modapplinfo <modappl> <desc> <applver> } ] { TABLE_modmacinfo <modmac> <mac> <serialnum> } { TABLE_moddiaginfo <mod> <diagstatus> } { TABLE_xbarinfo <xbarinf> <xbarports> <xbartype> <xbarmodel> <xbarstatus> } [ { TABLE_xbarpwrinfo <xbarpwr> <xbarpwrstat> <xbarreason> } ] { TABLE_xbarwwninfo <xbarwwn> <xbarsw> <xbarhw> <xbarwwnstr> } { TABLE_xbarmacinfo <xbarmac> <xbarmacaddr> <xbarserialnum> } ]

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

module

(Optional) Enter module number

s0

(Optional) Show xbar information

santa-cruz-range

(Optional) please enter the xbar number

fabric

(Optional) Show fabric information

__readonly__

(Optional)

TABLE_modinfo

(Optional) Show Module info

modinf

(Optional) Module

ports

(Optional) Num Ports

modtype

(Optional) Module Type

model

(Optional) Model

status

(Optional) Status

TABLE_modpwrinfo

(Optional) Mod Pwr Info

modpwr

(Optional) Module

pwrstat

(Optional) Power Status

reason

(Optional) Reason

TABLE_modwwninfo

(Optional) Mod WWN Info

modwwn

(Optional) Module

sw

(Optional) SW Ver

hw

(Optional) HW Ver

slottype

(Optional) Slot

TABLE_modapplinfo

(Optional) Mod Appl image info

modappl

(Optional) Module

desc

(Optional) Image desc

applver

(Optional) Version

TABLE_modmacinfo

(Optional) Mod MAC Info

modmac

(Optional) Module

mac

(Optional) MAC

serialnum

(Optional) Serial Num

TABLE_moddiaginfo

(Optional) Mod diag info

mod

(Optional) Module

diagstatus

(Optional) Diag status

TABLE_xbarinfo

(Optional) Show xbar info

xbarinf

(Optional) Module

xbarports

(Optional) Num Ports

xbartype

(Optional) Module Type

xbarmodel

(Optional) Model

xbarstatus

(Optional) Status

TABLE_xbarpwrinfo

(Optional) Xbar Pwr Info

xbarpwr

(Optional) Module

xbarpwrstat

(Optional) Power Status

xbarreason

(Optional) Reason

TABLE_xbarwwninfo

(Optional) Xbar WWN Info

xbarwwn

(Optional) Module

xbarsw

(Optional) SW Ver

xbarhw

(Optional) HW Ver

xbarwwnstr

(Optional) WWN

TABLE_xbarmacinfo

(Optional) Xbar MAC Info

xbarmac

(Optional) Module

xbarmacaddr

(Optional) MAC

xbarserialnum

(Optional) Serial Num

Command Mode

- /exec

show module bandwidth-fairness

show module <module> bandwidth-fairness [ __readonly__ { TABLE_fairness <statement> } ]

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

module

Enter module number

bandwidth-fairness

Show bandwidth fairness status

__readonly__

(Optional)

TABLE_fairness

(Optional)

statement

(Optional)

Command Mode

- /exec

show module internal activity

show module internal activity { module1 <module> | <s0> <santa-cruz-range> }

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

internal

Show line card manager related info

activity

Show internal module activity log

module1

Show per-module activity log

module

Enter module number

s0

Show xbar activity log

santa-cruz-range

please enter the xbar number

Command Mode

- /exec

show module internal all

show module internal all [ { module1 <module> | <s0> <santa-cruz-range> } ]

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

internal

Show line card manager related info

all

Show all internal module information

module1

(Optional) Show internal module information

module

(Optional) Enter module number

s0

(Optional) Show internal xbar information

santa-cruz-range

(Optional) please enter the xbar number

Command Mode

- /exec

show module internal errors

show module internal [ event-history ] errors

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

internal

Show line card manager related info

event-history

(Optional) Show various event logs of module

errors

Show error logs of module

Command Mode

- /exec

show module internal event-history

show module internal event-history <s0> <santa-cruz-range>

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

internal

Show line card manager related info

event-history

Show various event logs of module

s0

Show event log of a xbar

santa-cruz-range

please enter the xbar number

Command Mode

- /exec

show module internal event-history module1

show module internal event-history module1 <module>

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

internal

Show line card manager related info

event-history

Show various event logs of module

module1

Show event log of a module

module

Enter module number

Command Mode

- /exec

show module internal event-history stats

show module internal event-history stats

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

internal

Show line card manager related info

event-history

Show various event logs of module

stats

Show MODULE state transition stats

Command Mode

- /exec

show module internal exceptionlog

show module internal exceptionlog

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

internal

Show line card manager related info

exceptionlog

exception log information

Command Mode

- /exec

show module internal exceptionlog internal1 event-history all

show module internal exceptionlog internal1 event-history all

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

internal

Show line card manager related info

exceptionlog

exception log information

internal1

shows expl internal info

event-history

Show expl internal event history

all

Show all expl internal information

Command Mode

- /exec

show module internal exceptionlog internal1 event-history errors

show module internal exceptionlog internal1 event-history errors

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

internal

Show line card manager related info

exceptionlog

exception log information

internal1

shows expl internal info

event-history

Show expl internal event history

errors

Show expl internal error history

Command Mode

- /exec

show module internal exceptionlog internal1 event-history msgs

show module internal exceptionlog internal1 event-history msgs

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

internal

Show line card manager related info

exceptionlog

exception log information

internal1

shows expl internal info

event-history

Show expl internal event history

msgs

Show expl internal message history

Command Mode

- /exec

show module internal exceptionlog module1

show module internal exceptionlog module1 <module>

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

internal

Show line card manager related info

exceptionlog

exception log information

module1

per module exception log information

module

please enter module number

Command Mode

- /exec

show module internal info

show module internal info [ module1 <module> ]

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

internal

Show line card manager related info

info

Show internal module information

module1

(Optional) Show per-module internal information

module

(Optional) Enter module number

Command Mode

- /exec

show module internal lock

show module internal lock

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

internal

Show line card manager related info

lock

Show lock logs of lcm

Command Mode

- /exec

show module internal mem-stats

show module internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

internal

Show line card manager related info

mem-stats

Show memory allocation statistics of module

detail

(Optional) Show detail memstats for module

Command Mode

- /exec

show module internal msgs

show module internal [ event-history ] msgs

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

internal

Show line card manager related info

event-history

(Optional) Show various event logs of module

msgs

Show message logs of module

Command Mode

- /exec

show module internal sequence lc

show module internal sequence lc

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

internal

Show line card manager related info

sequence

Show sequence of interaction by module

lc

Show sequence of interaction for linecard module

Command Mode

- /exec

show module internal sequence sup

show module internal sequence sup

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

internal

Show line card manager related info

sequence

Show sequence of interaction by module

sup

Show sequence of interaction for supervisor

Command Mode

- /exec

show module internal sw info

show module internal sw info [ module1 <module> ]

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

internal

Show line card manager related info

sw

Show software state

info

Show internal module information

module1

(Optional) Show per-module internal information

module

(Optional) Enter module number

Command Mode

- /exec

show module supported

show module supported

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

supported

Show supported sw-card-types for this chassis

Command Mode

- /exec

show module uptime

show module uptime [ __readonly__ { TABLE_uptimeinf <slot> <starttime> <daysup> <hoursup> <minutesup> <secondsup> } ]

Syntax Description

Syntax Description

show

Show running system information

module

Show module information

uptime

Show how long the module has been up and running

__readonly__

(Optional)

TABLE_uptimeinf

(Optional) Show uptime info

slot

(Optional) Slot

starttime

(Optional) Start Time

daysup

(Optional) Days Up

hoursup

(Optional) Hours Up

minutesup

(Optional) Minutes Up

secondsup

(Optional) Seconds Up

Command Mode

- /exec

show monitor internal errors

show monitor internal [ event-history ] errors

Syntax Description

Syntax Description

show

Show running system information

monitor

Show Ethernet SPAN information

internal

Commands for internal use

event-history

(Optional) Show event history

errors

Show error logs of ethernet span

Command Mode

- /exec

show monitor internal event-history debug

show monitor internal event-history debug

Syntax Description

Syntax Description

show

Show running system information

monitor

Show Ethernet SPAN information

internal

Commands for internal use

event-history

Show event history

debug

Debug level

Command Mode

- /exec

show monitor internal event-history global

show monitor internal event-history global

Syntax Description

Syntax Description

show

Show running system information

monitor

Show Ethernet SPAN information

internal

Commands for internal use

event-history

Show event history

global

Global info

Command Mode

- /exec

show monitor internal event-history msgs

show monitor internal event-history msgs

Syntax Description

Syntax Description

show

Show running system information

monitor

Show Ethernet SPAN information

internal

Commands for internal use

event-history

Show event history

msgs

Message level

Command Mode

- /exec

show monitor internal info

show monitor internal info { global-info | stats | clear-stats }

Syntax Description

Syntax Description

show

Show running system information

monitor

Show Ethernet SPAN information

internal

Commands for internal use

info

Display debug information

global-info

Global component information

stats

Monitor stats

clear-stats

Clear monitor stats

Command Mode

- /exec

show monitor internal lock

show monitor internal [ event-history ] lock

Syntax Description

Syntax Description

show

Show running system information

monitor

Show Ethernet SPAN information

internal

Commands for internal use

event-history

(Optional) Show event history

lock

Show lock logs of ethernet span

Command Mode

- /exec

show monitor internal logs

show monitor internal [ event-history ] logs

Syntax Description

Syntax Description

show

Show running system information

monitor

Show Ethernet SPAN information

internal

Commands for internal use

event-history

(Optional) Show event history

logs

Show logs event history

Command Mode

- /exec

show monitor internal mem-stats

show monitor internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

monitor

Show Ethernet SPAN information

internal

Commands for internal use

mem-stats

Show memory allocation statistics

detail

(Optional) Display detailed information

Command Mode

- /exec

show mpls forwarding statistics

show mpls forwarding statistics [ interface { <interface> | all } ] [ __readonly__ { TABLE_mpls_stats [ <intf_name> ] <mpls_packets_sent> <mpls_bytes_sent> <mpls_packets_received> <mpls_bytes_received> <mpls_packets_forwarded> <mpls_bytes_forwarded> <mpls_packets_originated> <mpls_bytes_originated> <mpls_packets_consumed> <mpls_bytes_consumed> <mpls_packets_input_dropped> <mpls_bytes_input_dropped> <mpls_packets_output_dropped> <mpls_bytes_output_dropped> } ]

Syntax Description

Syntax Description

show

Show running system information

mpls

MPLS information

forwarding

Display MPLS software forwarded

statistics

Traffic statistics

interface

(Optional) Interface specific information

interface

(Optional) Interface chosen to display statistics

all

(Optional) All interfaces

__readonly__

(Optional)

TABLE_mpls_stats

(Optional) MPLS forwarding statistics

intf_name

(Optional) Interace name

mpls_packets_sent

(Optional) mpls packet sent

mpls_bytes_sent

(Optional) mpls bytes sent

mpls_packets_received

(Optional) mpls packet received

mpls_bytes_received

(Optional) mpls bytes received

mpls_packets_forwarded

(Optional) mpls packet forwarded

mpls_bytes_forwarded

(Optional) mpls bytes forwarded

mpls_packets_originated

(Optional) mpls packet originated

mpls_bytes_originated

(Optional) mpls bytes originated

mpls_packets_consumed

(Optional) mpls packet consumed

mpls_bytes_consumed

(Optional) mpls bytes consumed

mpls_packets_input_dropped

(Optional) mpls packet input dropped

mpls_bytes_input_dropped

(Optional) mpls bytes input dropped

mpls_packets_output_dropped

(Optional) mpls packet output dropped

mpls_bytes_output_dropped

(Optional) mpls bytes output dropped

Command Mode

- /exec

show mpls interfaces

show mpls interfaces [ __readonly__ TABLE_mpls_interface <intf> <oper> ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

interfaces

Display MPLS Interfaces

__readonly__

(Optional)

TABLE_mpls_interface

(Optional)

intf

(Optional)

oper

(Optional)

Command Mode

- /exec

show mpls interfaces detail

show mpls interfaces detail [ __readonly__ TABLE_mpls_interface_det <intf> <client_name> <oper_str> <ls_id> <mpls_sublayer_name> <mpls_sublayer_id> ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

interfaces

Interfaces

detail

Detail

__readonly__

(Optional)

TABLE_mpls_interface_det

(Optional)

intf

(Optional)

client_name

(Optional)

oper_str

(Optional)

ls_id

(Optional)

mpls_sublayer_name

(Optional)

mpls_sublayer_id

(Optional)

Command Mode

- /exec

show mpls interfaces internal

show mpls interfaces internal [ __readonly__ TABLE_mpls_interface_int <intf> <client_name> <oper_str> <ls_id> <mpls_sublayer_name> <mpls_sublayer_id> ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

interfaces

Interfaces

internal

Internal

__readonly__

(Optional)

TABLE_mpls_interface_int

(Optional)

intf

(Optional)

client_name

(Optional)

oper_str

(Optional)

ls_id

(Optional)

mpls_sublayer_name

(Optional)

mpls_sublayer_id

(Optional)

Command Mode

- /exec

show mpls interfaces statistics

show mpls interfaces <ifname> statistics [ __readonly__ TABLE_mpls_interface_stats <intf> <enabled> [ <pkts_in> ] [ <bytes_in> ] [ <pkts_out> ] [ <bytes_out> ] ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

interfaces

Interfaces

ifname

Interface Name

statistics

statistics

__readonly__

(Optional)

TABLE_mpls_interface_stats

(Optional)

intf

(Optional)

enabled

(Optional)

pkts_in

(Optional)

bytes_in

(Optional)

pkts_out

(Optional)

bytes_out

(Optional)

Command Mode

- /exec

show mpls ip bindings

show mpls ip bindings [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ generic ] [ { <prefix> { <mask> | <mask-length> } | <prefix-mask> } [ longer-prefix ] ] [ neighbor <addr> | local ] [ [ local-label <local-label> [ local-to <local-label-max> ] ] | [ remote-label <remote-label> [ remote-to <remote-label-max> ] ] ] [ advertisement-prefix-list | detail | summary ] [ __readonly__ { TABLE_bnd <ldp_ctx> <llaf> <total_prefixes> <total_rt_info> <current_prev_lbl> <current_prev_lblQ> <total_alloc_prev_lbl> <total_alloc_prev_lblQ> <local_bindings> <rem_bindings> { TABLE_bnd_acl_list <oldstyle> <prefix_acl> <peer_acl> } { TABLE_bnd_rec <lib_addr> <lib_mask> <lcl_bnd_rev> <no_route> <chkpt> <local_label> <withdraw> <remote_lsr> <remote_label> <rem_lbl_in_use> <stale_gr> <advert_acl_pending> <peer_acl> <prefix_acl> { TABLE_bnd_peer_list <peer_ident> } } } ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ip

MPLS IP information

bindings

Show the MPLS IP Label Information Base (LIB)

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VPN Routing/Forwarding instance name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display LIB information in all VRFs

generic

(Optional) Display generic labels

prefix

(Optional) Destination prefix

mask

(Optional) Destination prefix mask

mask-length

(Optional) Mask length

prefix-mask

(Optional) Destination prefix/mask

longer-prefix

(Optional) Include longer matches

neighbor

(Optional) Display labels from LDP neighbor

addr

(Optional) IP adjacency address

local

(Optional) Display only locally assigned labels

local-label

(Optional) Match locally assigned label values

local-label

(Optional) Locally assigned label value

local-to

(Optional) Label range

local-label-max

(Optional) Locally assigned label value

remote-label

(Optional) Match remotely assigned label values

remote-label

(Optional) Remotely assigned label value

remote-to

(Optional) Label range

remote-label-max

(Optional) Remotely assigned label value

advertisement-prefix-list

(Optional) Show advertisement prefix lists

detail

(Optional) Show detailed information

summary

(Optional) LDP summary information

__readonly__

(Optional) Read Only

TABLE_bnd

(Optional) Show bindings or tib summary for a vrf

ldp_ctx

(Optional) LDP context

llaf

(Optional) Local label filtering spec

total_prefixes

(Optional) Total number of prefixes

total_rt_info

(Optional) Total tib route info alloced

current_prev_lbl

(Optional) Current tib previous label info alloced

current_prev_lblQ

(Optional) Current tib previous label queues alloced

total_alloc_prev_lbl

(Optional) Total tib previous label info alloced

total_alloc_prev_lblQ

(Optional) Total tib previous label queues alloced

local_bindings

(Optional) Total number of locally assigned bindings

rem_bindings

(Optional) Total number of remote bindings

TABLE_bnd_acl_list

(Optional) Show advertisement access lists for default vrf

oldstyle

(Optional) Oldstyle assignment of prefix acls to entries

prefix_acl

(Optional) Prefix acl

peer_acl

(Optional) Peer acl

TABLE_bnd_rec

(Optional) Show bindings in a vrf

lib_addr

(Optional) LIB entry IP address

lib_mask

(Optional) LIB entry mask

lcl_bnd_rev

(Optional) Local binding revision for lib entry

no_route

(Optional) Displays if no route present for lib entry

chkpt

(Optional) Checkpoint state for lib entry

local_label

(Optional) Local label

withdraw

(Optional) Displays if label withdrawn or label withdraw sent

remote_lsr

(Optional) Remote binding label switched route for lib entry

remote_label

(Optional) Remote label for lib entry

rem_lbl_in_use

(Optional) Displays if out label is in use

stale_gr

(Optional) Displays if stale GR binding for lib entry

advert_acl_pending

(Optional) Displays if advert acl action pending for lib entry

peer_acl

(Optional) Advertisement acl: Peer acl name for lib entry

prefix_acl

(Optional) Advertisement acl: Prefix acl name for lib entry

TABLE_bnd_peer_list

(Optional) Show list of peers to which local label has been advertised

peer_ident

(Optional) Peer to which local label has been advertised

Command Mode

- /exec

show mpls ip ttl

show mpls ip ttl [ __readonly__ TABLE_mpls_ip_ttl <prop_or_exp> [ <forwarded> ] [ <local> ] [ <exp_count> ] ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ip

Display IP information

ttl

TTL related information

__readonly__

(Optional)

TABLE_mpls_ip_ttl

(Optional)

prop_or_exp

(Optional)

forwarded

(Optional)

local

(Optional)

exp_count

(Optional)

Command Mode

- /exec

show mpls label range

show mpls label range [ __readonly__ <dynamic-min> <dynamic-max> [ <static-min> <static-max> ] [ <srgb-min> <srgb-max> ] ]

Syntax Description

Syntax Description

show

Show running system information

mpls

MPLS configuration commands

label

Label properties

range

Label range

__readonly__

(Optional)

dynamic-min

(Optional)

dynamic-max

(Optional)

static-min

(Optional)

static-max

(Optional)

srgb-min

(Optional)

srgb-max

(Optional)

Command Mode

- /exec

show mpls label statistics

show mpls label statistics <label>

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

label

Show a specific label statistics

statistics

Statistics for the label

label

Label

Command Mode

- /exec

show mpls ldp backoff

show mpls ldp backoff [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ <initial_time> <maximum_time> { TABLE_backoff [ <vrf-name> ] <total_entry> { TABLE_backoff_rec <peer_id> <threshold> <elapsed_time> } } ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

backoff

LDP session setup backoff table

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VPN Routing/Forwarding instance name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display backoff information in all VRFs

__readonly__

(Optional) Read Only

initial_time

(Optional) Initial backoff value in seconds

maximum_time

(Optional) Maximum backoff value in seconds

TABLE_backoff

(Optional) Show backoff for a vrf

vrf-name

(Optional) VRF name

total_entry

(Optional) Total number of entries in Backoff table

TABLE_backoff_rec

(Optional) Show backoff record in a vrf

peer_id

(Optional) Peer router ID

threshold

(Optional) Backoff threshold in seconds

elapsed_time

(Optional) Backoff elapsed time in seconds

Command Mode

- /exec

show mpls ldp bindings

show mpls ldp bindings [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ { <prefix> { <mask> | <mask-length> } | <prefix-mask> } [ longer-prefix ] ] [ neighbor <addr> | local ] [ local-label <local-label> [ local-to <local-label-max> ] ] [ remote-label <remote-label> [ remote-to <remote-label-max> ] ] [ advertisement-prefix-list | detail ] [ __readonly__ { TABLE_bnd <ldp_ctx> <llaf> { TABLE_bnd_acl_list <oldstyle> <prefix_acl> <peer_acl> } { TABLE_bnd_rec <lib_addr> <lib_mask> <lcl_bnd_rev> <no_route> <chkpt> <local_label> <withdraw> <remote_lsr> <remote_label> <rem_lbl_in_use> <stale_gr> <advert_acl_pending> <peer_acl> <prefix_acl> { TABLE_bnd_peer_list <peer_ident> } } } ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

bindings

Show the LDP Label Information Base (LIB)

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VPN Routing/Forwarding instance name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display LIB information in all VRFs

prefix

(Optional) Destination prefix

mask

(Optional) Destination prefix mask

mask-length

(Optional) Mask length

prefix-mask

(Optional) Destination prefix/mask

longer-prefix

(Optional) Include longer matches

neighbor

(Optional) Display labels from LDP neighbor

addr

(Optional) IP adjacency address

local

(Optional) Display only locally assigned labels

local-label

(Optional) Match locally assigned label values

local-label

(Optional) Locally assigned label value

local-to

(Optional) Label range

local-label-max

(Optional) Locally assigned label value

remote-label

(Optional) Match remotely assigned label values

remote-label

(Optional) Remotely assigned label value

remote-to

(Optional) Label range

remote-label-max

(Optional) Remotely assigned label value

advertisement-prefix-list

(Optional) Show advertisement prefix lists

detail

(Optional) Show detailed information

__readonly__

(Optional) Read Only

TABLE_bnd

(Optional) Show bindings for a vrf

ldp_ctx

(Optional) LDP context

llaf

(Optional) Local label filtering spec

TABLE_bnd_acl_list

(Optional) Show advertisement access lists for default vrf

oldstyle

(Optional) Oldstyle assignment of prefix acls to entries

prefix_acl

(Optional) Prefix acl

peer_acl

(Optional) Peer acl

TABLE_bnd_rec

(Optional) Show bindings in a vrf

lib_addr

(Optional) LIB entry IP address

lib_mask

(Optional) LIB entry mask

lcl_bnd_rev

(Optional) Local binding revision for lib entry

no_route

(Optional) Displays if no route present for lib entry

chkpt

(Optional) Checkpoint state for lib entry

local_label

(Optional) Local label

withdraw

(Optional) Displays if label withdrawn or label withdraw sent

remote_lsr

(Optional) Remote binding label switched route for lib entry

remote_label

(Optional) Remote label for lib entry

rem_lbl_in_use

(Optional) Displays if out label is in use

stale_gr

(Optional) Displays if stale GR binding for lib entry

advert_acl_pending

(Optional) Displays if advert acl action pending for lib entry

peer_acl

(Optional) Advertisement acl: Peer acl name for lib entry

prefix_acl

(Optional) Advertisement acl: Prefix acl name for lib entry

TABLE_bnd_peer_list

(Optional) Show list of peers to which local label has been advertised

peer_ident

(Optional) Peer to which local label has been advertised

Command Mode

- /exec

show mpls ldp bindings summary

show mpls ldp bindings summary [ __readonly__ { TABLE_bnd <total_prefixes> <total_rt_info> <local_bindings> <rem_bindings> } ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

bindings

Show the LDP Label Information Base (LIB)

summary

Show summary information

__readonly__

(Optional) Read Only

TABLE_bnd

(Optional) Show bindings or tib summary for a vrf

total_prefixes

(Optional) Total number of prefixes

total_rt_info

(Optional) Total tib route info alloced

local_bindings

(Optional) Total number of localally assigned bindings

rem_bindings

(Optional) Total number of remote bindings

Command Mode

- /exec

show mpls ldp capabilities

show mpls ldp capabilities [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ { TABLE_cap [ <vrf-name> ] { TABLE_cap_rec <description> [ <state> ] } } ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

capabilities

Display LDP Capabilities information

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VPN Routing/Forwarding instance name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display Capabilities database in all VRFs

__readonly__

(Optional) Read Only

vrf-name

(Optional) VRF name

TABLE_cap

(Optional) Show capabilities for a vrf

TABLE_cap_rec

(Optional) Show capabilities record in a vrf

description

(Optional) Capability description

state

(Optional) Capability state information

Command Mode

- /exec

show mpls ldp checkpoint

show mpls ldp checkpoint [ __readonly__ ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

checkpoint

Display LDP checkpoint information

__readonly__

(Optional) Read Only

Command Mode

- /exec

show mpls ldp discovery

show mpls ldp discovery [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ detail ] [ __readonly__ { TABLE_dsc_ctx [ <ldp_ctx> ] [ <ldp_status> ] <local_ldp_ident> [ { TABLE_dsc_if <if> <ptcl> [ <if_status> ] <xmit_recv> [ <if_cfg> ] [ <igp_cfg> ] [ <hello_int> ] [ <local_xport_addr> ] { TABLE_dsc_adj <remote_ldp_ident> [ <nhop_info> ] [ <remote_src_ip> ] [ <remote_xport_ip> ] [ <hold_time> ] [ <local_hold_time> ] [ <nbr_hold_time> ] [ <nhop_addr> ] [ <nhop_mask> ] [ <pwdinfo> ] } [ <clients> ] } ] [ { TABLE_dsc_tgtd [ <tgtd_remote_ip> ] [ <tgtd_local_ip> ] [ <tgtd_ptcl> ] [ <tgtd_type> ] [ <tgtd_xmit_recv> ] [ <tgtd_hello_int> ] [ <tgtd_local_xport_addr> ] [ <tgtd_remote_ldp_ident> ] [ <tgtd_nhop_info> ] [ <tgtd_remote_src_ip> <tgtd_remote_xport_ip> ] [ <tgtd_hold_time> <tgtd_local_hold_time> <tgtd_nbr_hold_time> ] [ <tgtd_nhop_addr> <tgtd_nhop_mask> ] [ <tgtd_pwdinfo> ] } ] } ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

discovery

Display sources for locally generated LDP Discovery Hello PDUs

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VPN Routing/Forwarding instance name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display discovery information in all VRFs

detail

(Optional) Display detailed LDP discovery information

__readonly__

(Optional) Read Only

TABLE_dsc_ctx

(Optional) Show discovery info across contexts

ldp_ctx

(Optional) LDP context

ldp_status

(Optional) LDP operational status

local_ldp_ident

(Optional) Local router ID:Local label space

TABLE_dsc_if

(Optional) Show discovery info across interfaces

if

(Optional) Discovery source interface

ptcl

(Optional) LDP or TDP protocol

if_status

(Optional) LDP interface status

xmit_recv

(Optional) Transmitting and/or receiving

if_cfg

(Optional) Shown if mpls ip is enabled on the interface

igp_cfg

(Optional) Shown if autoconfig is enabled on the inteface

hello_int

(Optional) Hello interval in ms

local_xport_addr

(Optional) Local transport ip address

TABLE_dsc_adj

(Optional) Show link adjacencies

remote_ldp_ident

(Optional) Remote router ID:Remote label space

nhop_info

(Optional) Shown if no next-hop info for peer

remote_src_ip

(Optional) Remote source ip address

remote_xport_ip

(Optional) Remote transport ip address

hold_time

(Optional) Hold time in seconds

local_hold_time

(Optional) Proposed local hold time in seconds

nbr_hold_time

(Optional) Peer hold time in seconds

nhop_addr

(Optional) Peer reachable via this next-hop IP address

nhop_mask

(Optional) Next-hop mask

pwdinfo

(Optional) Password information

clients

(Optional) LDP clients (IPv4, mLDP, i.e.)

TABLE_dsc_tgtd

(Optional) Show targeted hellos

tgtd_remote_ip

(Optional) Remote ip address for targeted hellos

tgtd_local_ip

(Optional) Local ip address for targeted hellos

tgtd_ptcl

(Optional) LDP or TDP protocol for targeted hellos

tgtd_type

(Optional) Active/passive type for targeted hellos

tgtd_xmit_recv

(Optional) Transmitting and/or receiving targeted hellos

tgtd_hello_int

(Optional) Targeted hello interval in ms

tgtd_local_xport_addr

(Optional) Local transport address for targeted hellos

tgtd_remote_ldp_ident

(Optional) Remote router ID:Remote label space

tgtd_nhop_info

(Optional) Shown if no next-hop info for peer

tgtd_remote_src_ip

(Optional) Remote source ip address

tgtd_remote_xport_ip

(Optional) Remote transport ip address

tgtd_hold_time

(Optional) Targeted hold time in seconds

tgtd_local_hold_time

(Optional) Proposed local targeted hold time in seconds

tgtd_nbr_hold_time

(Optional) Peer targeted hold time in seconds

tgtd_nhop_addr

(Optional) Peer reachable via this next-hop IP address

tgtd_nhop_mask

(Optional) Next-hop mask

tgtd_pwdinfo

(Optional) Password information

Command Mode

- /exec

show mpls ldp graceful-restart

show mpls ldp graceful-restart [ __readonly__ <gr-st-enabled> [ <gr-st-restarted> <gr-st-fwd-holding-left-sec> ] <gr-st-nbr-liveness-sec> <gr-st-max-recovery-sec> [ <gr-st-fwd-holding-sec> ] { TABLE_dnbr <dnbr-rec_cnt> { TABLE_dnbr_rec [ <dnbr-rec-vrf-name> ] <dnbr-peer-id> <dnbr-peer-inst> <dnbr-lcl-id> [ <dnbr-reconn-left-sec> <dnbr-recovery-left-sec> ] <dnbr-addr-list-cnt> [ { TABLE_dnbr_addr_list_rec <dnbr_addr_list_rec_addr> } ] } } { TABLE_gr_sess [ <gr-sess-vrf-name> ] <gr-sess-peer-id> <gr-sess-state> } ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

graceful-restart

Show Graceful Restart summary

__readonly__

(Optional) Read Only

gr-st-enabled

(Optional) LDP Graceful Restart Enabled

gr-st-restarted

(Optional) LDP is restarting gracefully

gr-st-fwd-holding-left-sec

(Optional) LDP forwarding state holdtime left

gr-st-nbr-liveness-sec

(Optional) LDP GR neighbor liveness time

gr-st-max-recovery-sec

(Optional) LDP GR max recovery time

gr-st-fwd-holding-sec

(Optional) LDP GR forwarding state holdtime

TABLE_dnbr

(Optional) LDP GR down neighbor information

dnbr-rec_cnt

(Optional) LDP GR down neighbor count

TABLE_dnbr_rec

(Optional) LDP GR down neighbor record

dnbr-rec-vrf-name

(Optional) LDP GR down neighbor vrf

dnbr-peer-id

(Optional) LDP GR down neighbor peer ID

dnbr-peer-inst

(Optional) LDP GR down neighbor instance

dnbr-lcl-id

(Optional) LDP GR down neighbor local ID

dnbr-reconn-left-sec

(Optional) LDP GR down neighbor reconnection left

dnbr-recovery-left-sec

(Optional) LDP GR down neighbor recovery left

dnbr-addr-list-cnt

(Optional) LDP GR down neighbor address list count

TABLE_dnbr_addr_list_rec

(Optional) LDP GR down neighbor address list

dnbr_addr_list_rec_addr

(Optional) LDP GR down neighbor address

TABLE_gr_sess

(Optional) LDP GR session information

gr-sess-vrf-name

(Optional) LDP GR session vrf

gr-sess-peer-id

(Optional) LDP GR session peer ID

gr-sess-state

(Optional) LDP GR session state

Command Mode

- /exec

show mpls ldp igp sync

show mpls ldp igp sync [ vrf { <vrf-name> | <vrf-known-name> | all } | interface <intfc> ] [ __readonly__ { TABLE_isync <ldp_ctx> { TABLE_isync_if_list <if_name> <ldp_status> <isync_status> <sync_achieved> <peer_reachable> <delay_time> <secs_left> <holddown_time> { TABLE_isync_peer_list <peer_ident> <gr_enabled> } { TABLE_isync_nsi_rec <nsi_ident> <chkpt_created> } { TABLE_isync_igp_rec <igp_enabled> <igp_instance> } } } ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

igp

IGP-related information

sync

LDP-IGP Synchronization

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VPN Routing/Forwarding instance name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display IGP SYNC information in all VRFs

interface

(Optional) Interface of interest

intfc

(Optional)

__readonly__

(Optional) Read Only

TABLE_isync

(Optional) Show igp sync info for a vrf

ldp_ctx

(Optional) LDP context

TABLE_isync_if_list

(Optional) Show igp sync info for a single interface

if_name

(Optional) Interface namestring

ldp_status

(Optional) LDP configured/not configured

isync_status

(Optional) LDP-IGP Synchronization enabled/disabled

sync_achieved

(Optional) Sync status: sync achieved/not achieved

peer_reachable

(Optional) Sync status: peer reachable/not reachable

delay_time

(Optional) Sync delay time (seconds)

secs_left

(Optional) Sync timer remaining time (seconds left)

holddown_time

(Optional) IGP holddown time

TABLE_isync_peer_list

(Optional) Show all peers for interface

peer_ident

(Optional) Peer LDP Ident

gr_enabled

(Optional) Displays if GR is enabled for session

TABLE_isync_nsi_rec

(Optional) Show all interface-level neighbor id records

nsi_ident

(Optional) GR-enabled peer ID

chkpt_created

(Optional) Displays if NSI checkpoint created

TABLE_isync_igp_rec

(Optional) Show sync-enabled IGP instances enabled on interface

igp_enabled

(Optional) Displays if IGP sync is enabled on intf

igp_instance

(Optional) IGP instance protocol and handle

Command Mode

- /exec

show mpls ldp internal

show mpls ldp internal { client | counters { cntr-all | system | forwarding } | debug | memory | pss { all | client | core | sdb } | tunnel-clients | transport [ detail ] } [ __readonly__ ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

internal

internal information

client

Show LDP internal client information

counters

Show LDP internal counters

cntr-all

all LDP counters

debug

Show LDP internal debug information

system

LDP system related counters

forwarding

LDP forwarding related counters

memory

Show LDP chunk memory information

pss

pss databases

all

all pss databases

client

client pss database

core

core dynamic pss database

sdb

client sdb database

tunnel-clients

tunnel client information

transport

Show transport information

detail

(Optional) Show transport information

__readonly__

(Optional) Read Only

Command Mode

- /exec

show mpls ldp internal event-history dev

show mpls ldp internal event-history dev

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

internal

internal information

event-history

Show various event logs of ldp

dev

Show LDP development-only events

Command Mode

- /exec

show mpls ldp internal event-history errors

show mpls ldp internal event-history errors

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

internal

internal information

event-history

Show various event logs of ldp

errors

Show error logs of LDP

Command Mode

- /exec

show mpls ldp internal event-history msgs

show mpls ldp internal event-history msgs

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

internal

internal information

event-history

Show various event logs of ldp

msgs

Show various message logs of LDP

Command Mode

- /exec

show mpls ldp internal event-history transport connection

show mpls ldp internal event-history transport connection

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

internal

internal information

event-history

Show various event logs of ldp

transport

Show ldp transport event logs

connection

Show transport connection event logs

Command Mode

- /exec

show mpls ldp internal mem-stats

show mpls ldp internal mem-stats [ no-libs ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

internal

internal information

mem-stats

Show memory allocation statistics

no-libs

(Optional) Exclude library memory statistics

detail

(Optional) Display detailed information

Command Mode

- /exec

show mpls ldp internal route

show mpls ldp internal route [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ { <prefix> { <mask> | <mask-length> } | <prefix-mask> } [ longer-prefix ] ] [ neighbor <addr> | local ] [ local-label <local-label> [ local-to <local-label-max> ] ] [ remote-label <remote-label> [ remote-to <remote-label-max> ] ] [ advertisement-prefix-list | detail ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

internal

internal information

route

Show the LDP Label Information Base (LIB)

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VPN Routing/Forwarding instance name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display LIB information in all VRFs

prefix

(Optional) Destination prefix

mask

(Optional) Destination prefix mask

mask-length

(Optional) Mask length

prefix-mask

(Optional) Destination prefix/mask

longer-prefix

(Optional) Include longer matches

neighbor

(Optional) Display labels from LDP neighbor

addr

(Optional) IP adjacency address

local

(Optional) Display only locally assigned labels

local-label

(Optional) Match locally assigned label values

local-label

(Optional) Locally assigned label value

local-to

(Optional) Label range

local-label-max

(Optional) Locally assigned label value

remote-label

(Optional) Match remotely assigned label values

remote-label

(Optional) Remotely assigned label value

remote-to

(Optional) Label range

remote-label-max

(Optional) Remotely assigned label value

advertisement-prefix-list

(Optional) Show advertisement prefix lists

detail

(Optional) Show detailed information

Command Mode

- /exec

show mpls ldp neighbor

show mpls ldp neighbor [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ <address> | <interface> ] [ capabilities | detail | graceful-restart | password | internal ] [ __readonly__ { TABLE_ctx <ldp_ctx> <tdp_status> { TABLE_rec <peer_router_id> <local_router_id> <remote_addr> <remote_tcp_port> <local_addr> <local_tcp_port> [ <md5_status> <sha1_status> ] [ <pwd_info> <adj_pwd_rx> <adj_pwd_tx> <tcp_pwd_rx> <tcp_pwd_tx> ] <state> <msgs_sent> <msgs_rcvd> <advert> <last_rev_sent> <up_time> <uid> <peer_id> [ <gr_status> <gr_reconnect_time> ] <peer_holdtime> <ka_interval> <peer_state> [ <inbound_filter> ] [ <sp_state> <sp_info> <sp_timer_left> ] [ <loop_det_peer> <loop_det_local> <pvl_peer> <pvl_local> ] { TABLE_adj <intf> <src_ip> <hello_holdtime> <hello_intvl> <dhcb_local> <dhcb_target> <dhcb_mode> <dhcb_holdtime> <dhcb_intvl> } { TABLE_addr <peer_addr> } { TABLE_dup_addr <dup_addr> } { TABLE_client <client_name> } { TABLE_cap_sent <cap_sent_name> } { TABLE_cap_rcvd <cap_rcvd_name> } } } ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

neighbor

LDP neighbor

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VPN Routing/Forwarding instance name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display neighbor information in all VRFs

address

(Optional) Neighbor address

interface

(Optional) Local interface

capabilities

(Optional) Display neighbor capability information

detail

(Optional) Display detailed neighbor information

graceful-restart

(Optional) Display graceful restart neighbor information

password

(Optional) Display neighbor password information

internal

(Optional) Display internal neighbor information

__readonly__

(Optional) Read Only

TABLE_ctx

(Optional) Show session info across all contexts

ldp_ctx

(Optional) LDP context

tdp_status

(Optional) LDP status

TABLE_rec

(Optional) Show session info for a vrf

peer_router_id

(Optional) Peer router LDP ID

local_router_id

(Optional) Local router LDP ID

remote_addr

(Optional) TCP connection remote IP address

remote_tcp_port

(Optional) TCP connection remote port number

local_addr

(Optional) TCP connection local IP address

local_tcp_port

(Optional) TCP connection local port number

md5_status

(Optional) MD5 on for this LDP session

sha1_status

(Optional) SHA1 on for this LDP session

pwd_info

(Optional) Password status

adj_pwd_rx

(Optional) Adj pwd Rx

adj_pwd_tx

(Optional) Adj pwd Tx

tcp_pwd_rx

(Optional) TCP pwd Rx

tcp_pwd_tx

(Optional) TCP pwd Tx

state

(Optional) LDP session state

msgs_sent

(Optional) Number of msgs/PIEs sent

msgs_rcvd

(Optional) Number of msgs/PIEs received

advert

(Optional) Neighbor label advertisement type

last_rev_sent

(Optional) Last TIB revision sent

up_time

(Optional) LDP session up time

uid

(Optional) Unique ID for adjacency

peer_id

(Optional) Peer index for adjacency

gr_status

(Optional) Graceful restart status

gr_reconnect_time

(Optional) Graceful restart peer reconnect time (msecs)

peer_holdtime

(Optional) Holdtime of peer (ms)

ka_interval

(Optional) Keepalive interval

peer_state

(Optional) State of session with peer

inbound_filter

(Optional) LDP inbound filtering accept acl

sp_state

(Optional) LDP Session Protection state

sp_info

(Optional) LDP Session Protection filter and duration (secs)

sp_timer_left

(Optional) LDP Session Protection holdup time remaining (secs)

loop_det_peer

(Optional) Loop Detection peer status

loop_det_local

(Optional) Loop Detection local status

pvl_peer

(Optional) Path Vector Limit of peer

pvl_local

(Optional) Path Vector Limit of local

TABLE_adj

(Optional) LDP discovery sources

intf

(Optional) Local interface to peer

src_ip

(Optional) Source IP address of hello packet

hello_holdtime

(Optional) Hello holdtime (ms)

hello_intvl

(Optional) Hello interval (ms)

dhcb_local

(Optional) DHCB local IP address

dhcb_target

(Optional) DHCB target IP address

dhcb_mode

(Optional) DHCB active or passive mode

dhcb_holdtime

(Optional) Targeted hello holdtime

dhcb_intvl

(Optional) Targeted hello interval

TABLE_addr

(Optional) Addresses bound to peer LDP ID

peer_addr

(Optional) Address bound to peer LDP Ident

TABLE_dup_addr

(Optional) Duplicate addresses advertised by peer

dup_addr

(Optional) Duplicate address advertised by peer

TABLE_client

(Optional) Client names associated with session

client_name

(Optional) Client name

TABLE_cap_sent

(Optional) Capabilities sent

cap_sent_name

(Optional) Capability sent

TABLE_cap_rcvd

(Optional) Capabilities received

cap_rcvd_name

(Optional) Capability received

Command Mode

- /exec

show mpls ldp parameters

show mpls ldp parameters [ __readonly__ <ptcl-version> [ <sess-hold-infinite> <sess-hold-sec> ] <kpalive-intvl-sec> <hello-hold-sec> <hello-intvl-sec> <tgthello-hold-sec> <tgthello-intvl-sec> <tgthello-acpt-fltr> <omit-xport-addr> <ignore-xport-addr> <hello-spoofing> <max-hop-count> <loop-detection-st> { TABLE_fctrl <fctrl_state> [ <fctrl_compat_fset> ] [ { TABLE_features <feature_name> } ] [ <feature_none> ] } ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

parameters

Display LDP configuration parameters

__readonly__

(Optional) Read Only

ptcl-version

(Optional) LDP protocol version

sess-hold-infinite

(Optional) LDP session holdtime infinite

sess-hold-sec

(Optional) LDP session holdtime in seconds

kpalive-intvl-sec

(Optional) LDP session keepalive interval in seconds

hello-hold-sec

(Optional) LDP discovery adjacency holdtime in seconds

hello-intvl-sec

(Optional) LDP discovery hello interval in seconds

tgthello-hold-sec

(Optional) LDP targeted adjacency holdtime in seconds

tgthello-intvl-sec

(Optional) LDP targeted hello interval in seconds

tgthello-acpt-fltr

(Optional) LDP targeted hello acceptance filter

omit-xport-addr

(Optional) Omitting transport addr in transmitted hello

ignore-xport-addr

(Optional) Ignoring transport addr in received hello

hello-spoofing

(Optional) Accepting undirected hellos to non-broadcast addresses

max-hop-count

(Optional) Downstream on Demand max hop count

loop-detection-st

(Optional) LDP loop detection

TABLE_fctrl

(Optional) LDP feature set manager

fctrl_state

(Optional) LDP feature set manager state

fctrl_compat_fset

(Optional) LDP feature set compatible

TABLE_features

(Optional) LDP feature list

feature_name

(Optional) LDP feature name

feature_none

(Optional) LDP not enabled

Command Mode

- /exec

show mpls oam echo statistics

show mpls oam echo statistics [ summary ] [ __readonly__ <rq_sent> <rq_timeout> <rq_unsent> <rq_rcvd> <rx_sent> <rx_unsent> <rx_rcvd> <rc_zero> <rc_one> <rc_two> <rc_three> <rc_four> <rc_five> <rc_six> <rc_seven> <rc_eight> <rc_nine> <rc_ten> <rc_eleven> <rc_twelve> <rc_thirteen> <rc_fourteen> <summary_flag> ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

oam

Display OAM information

echo

Echo request information

statistics

Detailed Echo packet statistics

summary

(Optional) Echo packet statistics summary

__readonly__

(Optional)

rq_sent

(Optional) Requests sent

rq_timeout

(Optional) Requests timeout

rq_unsent

(Optional) Requests unsent

rq_rcvd

(Optional) Requests received

rx_sent

(Optional) Replies sent

rx_unsent

(Optional) Replies unsent

rx_rcvd

(Optional) Replies received

rc_zero

(Optional) Return code zero

rc_one

(Optional) Return code one

rc_two

(Optional) Return code two

rc_three

(Optional) Return code three

rc_four

(Optional) Return code four

rc_five

(Optional) Return code five

rc_six

(Optional) Return code six

rc_seven

(Optional) Return code seven

rc_eight

(Optional) Return code eight

rc_nine

(Optional) Return code nine

rc_ten

(Optional) Return code ten

rc_eleven

(Optional) Return code eleven

rc_twelve

(Optional) Return code twelve

rc_thirteen

(Optional) Return code thirteen

rc_fourteen

(Optional) Return code fourteen

summary_flag

(Optional) Summary flag

Command Mode

- /exec

show mpls oam internal mem-stats

show mpls oam internal mem-stats [ no-libs ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS information

oam

Display OAM information

internal

Display internal OAM information

mem-stats

Show memory allocation statistics

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

Command Mode

- /exec

show mpls static binding

show mpls static binding [ vrf { <vrf-name> | <vrf-known-name> } ] { { ipv4 [ <prefix> { <mask> | <mask-length> } | <prefix-mask> ] [ local | remote ] [ nexthop <addr> ] [ inconsistency ] [ lsp <slb_name> ] } | { ipv6 [ <ipv6-prefix> ] [ local | remote ] [ ipv6-nexthop <ipv6-addr> ] [ inconsistency ] } | all [ inconsistency ] } [ __readonly__ [ TABLE_slb [ <slb_name> ] [ <slb_prefix> ] [ <slb_mask> ] <slb_vrf> <slb_inlabel> [ <slb_type> ] [ TABLE_slb_outlbl_list [ <slb_nh_path_num> ] <slb_nhop> <slb_outlabel> ] [ <inconsistency_reason> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

static

Show MPLS static information

binding

Show static label bindings

ipv4

Show ipv4 static label bindings

ipv6

Show ipv6 static label bindings

all

Show all static label bindings

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

local

(Optional) Incoming (local) static label bindings

remote

(Optional) Outgoing (remote) static label bindings

inconsistency

(Optional) Inconsistent bindings between config and URIB

prefix

(Optional) Destination ipv4 prefix

mask

(Optional) Destination ipv4 prefix mask

mask-length

(Optional) Ipv4 mask length

prefix-mask

(Optional) Destination prefix/mask

nexthop

(Optional) Ipv4 next hop address

addr

(Optional) Ipv4 Next hop address

ipv6-nexthop

(Optional) Ipv6 next hop address

lsp

(Optional) LSP Name

__readonly__

(Optional) Read Only

TABLE_slb

(Optional) Show static label bindings for a given prefix

slb_name

(Optional) Name

slb_prefix

(Optional) Prefix

slb_type

(Optional) SLB Type

slb_mask

(Optional) Mask bits

slb_vrf

(Optional) VRF name for prefix

slb_inlabel

(Optional) Incoming label for prefix

TABLE_slb_outlbl_list

(Optional) Show static outgoing labels for prefix

slb_nhop

(Optional) Next-hop address

slb_nh_path_num

(Optional) Identifier for outgoing nexthop

slb_outlabel

(Optional) Outgoing label for next-hop address

inconsistency_reason

(Optional) Reason for inconsistency

Command Mode

- /exec

show mpls static binding

show mpls static binding [ ipv4 ] [ vrf { <vrf-name> | <vrf-known-name> } ] [ <prefix> { <mask> | <mask-length> } | <prefix-mask> ] [ local | remote ] [ nexthop <addr> ] [ __readonly__ { TABLE_slb [ <slb_prefix> <slb_mask> ] <slb_vrf> <slb_inlabel> [ { TABLE_slb_outlbl_list <slb_nhop> <slb_outlabel> } ] } ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

static

Show MPLS static information

binding

Show static label bindings

ipv4

(Optional) Show ipv4 static label bindings

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

prefix

(Optional) Destination prefix

mask

(Optional) Destination prefix mask

mask-length

(Optional) Mask length

prefix-mask

(Optional) Destination prefix/mask

local

(Optional) Incoming (local) static label bindings

remote

(Optional) Outgoing (remote) static label bindings

nexthop

(Optional) Next hop address

addr

(Optional) Next hop address

__readonly__

(Optional) Read Only

TABLE_slb

(Optional) Show static label bindings for a given prefix

slb_prefix

(Optional) Prefix

slb_mask

(Optional) Mask bits

slb_vrf

(Optional) VRF name for prefix

slb_inlabel

(Optional) Incoming label for prefix

TABLE_slb_outlbl_list

(Optional) Show static outgoing labels for prefix

slb_nhop

(Optional) Next-hop address

slb_outlabel

(Optional) Outgoing label for next-hop address

Command Mode

- /exec

show mpls static binding vrf per-vrf

show mpls static binding [ ipv4 ] vrf { <vrf-name> | <vrf-known-name> } per-vrf [ __readonly__ { TABLE_slb_per_vrf <slb_vrf_per_vrf> <slb_inlabel_per_vrf> } ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

static

Show MPLS static information

binding

Show static label bindings

ipv4

(Optional) Show ipv4 static label bindings

vrf

VRF Routing/Forwarding instance information

vrf-name

VRF name

vrf-known-name

Known VRF name

per-vrf

per-vrf static label bindings

__readonly__

(Optional) Read Only

TABLE_slb_per_vrf

(Optional) Show static label bindings for per-vrf deaggregation

slb_vrf_per_vrf

(Optional) VRF name

slb_inlabel_per_vrf

(Optional) Incoming label

Command Mode

- /exec

show mpls static internal rnh

show mpls static internal rnh [ __readonly__ [ TABLE_rnh <table_id> <prefix> <refcount> ] ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

static

Show MPLS static information

internal

Show MPLS static internal information

rnh

Show mpls static internal RNH database

__readonly__

(Optional)

TABLE_rnh

(Optional)

table_id

(Optional)

prefix

(Optional)

refcount

(Optional)

Command Mode

- /exec

show mpls static trace

show mpls static trace { error | warning | event } [ size ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

static

Static Label Bindings

trace

MPLS static trace

error

MPLS static error trace

warning

MPLS static warning trace

event

MPLS static event trace

size

(Optional) trace buffer size in Kbytes

Command Mode

- /exec

show mpls strip internal

show mpls strip internal [ info ] [ { global | labels | ports } [ <val> ] ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Configure MPLS settings

strip

Stripping of MPLS headers

internal

Show stripcl internal information

info

(Optional) Show internal data structure information

global

(Optional) Display internal global info

labels

(Optional) Display detailed label info

ports

(Optional) Display port info

val

(Optional) Option Value for the param

Command Mode

- /exec

show mpls strip labels

show mpls strip labels [ all | static | dynamic | <label_val> ] [ __readonly__ <disp_summary> TABLE_labels <disp_label> <disp_age> <disp_interface> <disp_pkt_cnt> <disp_stats> <disp_static> ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Configure MPLS settings

strip

Stripping of MPLS headers

labels

labels added in the system

all

(Optional) all labels [default]

static

(Optional) labels programmed using cli

dynamic

(Optional) dynamically learned

label_val

(Optional) Label to show

__readonly__

(Optional) Read Only

TABLE_labels

(Optional) MPLS Strip Labels Tables

disp_label

(Optional) Label

disp_age

(Optional) Age

disp_interface

(Optional) Interface

disp_pkt_cnt

(Optional) Packet Count

disp_stats

(Optional) Statistics

disp_static

(Optional) Static

disp_summary

(Optional) Summary

Command Mode

- /exec

show mpls switching

show mpls switching [ labels <label> [ <max-label> ] | interface <intf> | { <ip-addr> | <ipv4-prefix> } [ vrf <vrf-name> ] | <ipv6-prefix> [ vrf <vrf-name> ] | aggregate [ ipv4 | ipv6 ] [ vrf <vrf-name> ] | { fec { ipv4_prefix [ vrf <vrf-name> ] | ipv6_prefix [ vrf <vrf-name> ] | deagg [ vrf <vrf-name> ] } } | { summary } ] [ detail ] [ private ] [ vrf <vrf-name> ] [ __readonly__ [ TABLE_vrf <vrf_name> [ TABLE_inlabel <in_label> <out_label_stack> + { <ipv4_prefix> | <ipv6_prefix> } [ { <tunnel_v4_mid_source> | <tunnel_v6_mid_source> } <tunnel_id> { <ext_v4_tunnel_id> | <ext_v6_tunnel_id> } <tunnel_instance> <deagg_vrf> <deagg_af> <tunnel_head> ] <out_interface> { <ipv4_next_hop> | <ipv6_next_hop> } [ <nhlfe_p2p_flag> ] [ <nhlfe_frr_status> ] [ <nhlfe_stale_flag> ] [ <in_packets> <in_bytes> ] [ [ <out_label> + ] <out_packets> + <out_bytes> + ] [ { <tunnel_v4_mid_dest> | <tunnel_v6_mid_dest> } { <ipv4_next_hop> | <ipv6_next_hop> } ] [ <per_ce_table> <per_ce_nh_set_id> ] [ <fec_none_label> ] [ <table_name> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

ip-addr

(Optional) Match destination address

ipv4-prefix

(Optional) Specify an IP prefix/mask

fec

(Optional) Show FEC information in the ULIB

private

(Optional) Show more detailed information in the ULIB

labels

(Optional) Show a specific label-related information

label

(Optional) Low label value

max-label

(Optional) High label value

interface

(Optional) Match outgoing interface

aggregate

(Optional) Show aggregate-related information

intf

(Optional) Specify outgoing interface

summary

(Optional) Summarized information

detail

(Optional) Detailed information

ipv4_prefix

(Optional) IPv4 prefix

ipv6_prefix

(Optional) IPv6 prefix

ipv4

(Optional) Display IPv4 information

ipv6

(Optional) Display IPv6 information

deagg

(Optional) De-aggregation

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name (Max Size 32)

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf_name

(Optional)

TABLE_inlabel

(Optional)

in_label

(Optional)

out_label_stack

(Optional)

ipv4_prefix

(Optional)

tunnel_v4_mid_source

(Optional)

tunnel_v4_mid_dest

(Optional)

tunnel_id

(Optional)

ext_v4_tunnel_id

(Optional)

tunnel_instance

(Optional)

tunnel_head

(Optional)

deagg_vrf

(Optional)

deagg_af

(Optional)

out_interface

(Optional)

ipv4_next_hop

(Optional)

ipv6_next_hop

(Optional)

nhlfe_frr_status

(Optional)

nhlfe_stale_flag

(Optional)

nhlfe_p2p_flag

(Optional)

table_name

(Optional)

in_packets

(Optional)

in_bytes

(Optional)

out_label

(Optional)

out_packets

(Optional)

out_bytes

(Optional)

per_ce_table

(Optional)

per_ce_nh_set_id

(Optional)

fec_none_label

(Optional)

Command Mode

- /exec

show mpls switching clients

show mpls switching clients [ __readonly__ [ TABLE_client <pib-name> <pib-index> <pib-uuid> <pib-sap> <stale-time> <pib-flag> [ <stale-due> ] <reg-msg> <conv-msg> [ <inv-conv> ] <fec-msg> <fec-add> <ile-add> <fec-del> <ile-del> <last-xid> <fec-ack> ] ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

clients

Display ULIB client components

__readonly__

(Optional)

TABLE_client

(Optional)

pib-name

(Optional) Name of the client(pib)

pib-index

(Optional) PIB Index

pib-uuid

(Optional) PIB UUID

pib-sap

(Optional) MTS SAP for the pib

stale-time

(Optional) Stale time

pib-flag

(Optional) Flags set by the pib

stale-due

(Optional) Stale timer due in

reg-msg

(Optional) Number of Registration Message

conv-msg

(Optional) Number of Converge Message

inv-conv

(Optional) Number of Invalid Convergence message

fec-msg

(Optional) Number of FEC messages

fec-add

(Optional) Number of FEC Add messages

ile-add

(Optional) Number of ILE Add messages

fec-del

(Optional) Number of FEC delete messages

ile-del

(Optional) Number of ILE delete messages

last-xid

(Optional) Last XID

fec-ack

(Optional) Number of FEC Ack messages sent

Command Mode

- /exec

show mpls switching internal client

show mpls switching internal client

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

internal

Debug implementation internals

client

Client pib entries from SDB

Command Mode

- /exec

show mpls switching internal distribution

show mpls switching internal distribution

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

internal

Debug implementation internals

distribution

UFDM Distribution

Command Mode

- /exec

show mpls switching internal dynamicbf

show mpls switching internal dynamicbf

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

internal

Debug implementation internals

dynamicbf

dynamic bitfield entries

Command Mode

- /exec

show mpls switching internal event-history

show mpls switching internal event-history { errors | msgs | events | fecdb | ha | snmp | stats | ufdm | lbr | dme }

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

internal

Debug implementation internals

event-history

Show various event logs of ULIB

errors

Show error logs

msgs

Show IPC event logs

events

Show ULIB event logs

fecdb

Show FEC database event logs

ha

Show HA event logs

snmp

Show SNMP eventlogs

stats

Show statistics event logs

ufdm

Show UFDM event logs

lbr

Show LBR event logs

dme

Show DME event logs

Command Mode

- /exec

show mpls switching internal feature

show mpls switching internal feature [ __readonly__ [ TABLE_feature <feature-name> <feature-state> [ TABLE_client <client-name> <client-index> <client-uuid> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

internal

Debug implementation internals

feature

Feature state and associated clients

__readonly__

(Optional)

TABLE_feature

(Optional) Table for a list of features

TABLE_client

(Optional) Table for a list of client signed up for the feature

feature-name

(Optional) Name of the feature

feature-state

(Optional) State of the feature

client-name

(Optional) Name of the client

client-index

(Optional) Index of the client

client-uuid

(Optional) UUID of the client

Command Mode

- /exec

show mpls switching internal fec

show mpls switching internal fec <fec_type>

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

internal

Debug implementation internals

fec

FEC entries from SDB

fec_type

FEC type

Command Mode

- /exec

show mpls switching internal fec label

show mpls switching internal fec { label | interface }

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

internal

Debug implementation internals

fec

FEC entries from SDB

label

By input label

interface

By input interfaces

Command Mode

- /exec

show mpls switching internal holddownbf

show mpls switching internal holddownbf

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

internal

Debug implementation internals

holddownbf

Holddown bitfield entries from PSS

Command Mode

- /exec

show mpls switching internal lbr

show mpls switching internal lbr

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

internal

Debug implementation internals

lbr

Label Block Requests

Command Mode

- /exec

show mpls switching internal mem-stats

show mpls switching internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

internal

Debug implementation internals

mem-stats

Show memory allocation statistics

detail

(Optional) Display detailed information

Command Mode

- /exec

show mpls switching internal staticbf

show mpls switching internal staticbf

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

internal

Debug implementation internals

staticbf

static bitfield entries

Command Mode

- /exec

show mpls traffic-eng

show mpls traffic-eng { fast-reroute database summary | tunnels fast-reroute summary | tunnels protection summary } [ __readonly__ [ <frr_num_lsps> <frr_num_active_lsps> <frr_backup_tunnels> <frr_active_intfs> ] ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

fast-reroute

Fast Reroute information

database

Fast Reroute Database information

summary

Summary information

tunnels

MPLS traffic-eng tunnel status

protection

Failure protection provided for tunnels

summary

Summary information

fast-reroute

Fast Reroute information

summary

Summary information

__readonly__

(Optional)

frr_num_lsps

(Optional) num lsps

frr_num_active_lsps

(Optional) num active lsps

frr_backup_tunnels

(Optional) num backup tunnels

frr_active_intfs

(Optional) num active interfaces

Command Mode

- /exec

show mpls traffic-eng

show mpls traffic-eng { { fast-reroute database [ destination <dest-addr> ] [ interface <intfc> ] [ backup-interface { <tunnel-intf> | unresolved } ] [ role { head | middle } | state { active | ready | requested } ] [ detail ] } | { tunnels fast-reroute } } [ __readonly__ [ { TABLE_frr_db <protected_tun> [ <sprint_downlink_name> <sprint_tun_protected_bw> [ <sprint_prot_bw> ] [ <backup_none> | <sprint_tun_backup_name> <sprint_tun_lsp_frr_out_active> <sprint_tun_frr_protect_level> <sprint_tun_frr_out_nnhop> ] ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

database

Fast Reroute Database information

destination

(Optional) Match LSP destination address

dest-addr

(Optional) Tunnel destination address

interface

(Optional) Match protected outgoing interface

intfc

(Optional)

backup-interface

(Optional) Match backup outgoing interface

tunnel-intf

(Optional) Tunnel interface

unresolved

(Optional) Unresolved backup interface

role

(Optional) Restrict display to LSPs with specified role

head

(Optional) LSPs that originate locally

middle

(Optional) LSPs that transit locally

state

(Optional) Restrict display to LSPs with specified FRR state

active

(Optional) LSPs with active FRR state

ready

(Optional) LSPs with ready FRR state

requested

(Optional) LSPs with requested FRR state

detail

(Optional) Detailed information

tunnels

MPLS traffic-eng tunnel status

fast-reroute

Fast Reroute information

__readonly__

(Optional)

TABLE_frr_db

(Optional) frr_db info

protected_tun

(Optional) protected tunnel

backup_none

(Optional) backup none

sprint_downlink_name

(Optional) sprint downlink name

sprint_tun_protected_bw

(Optional) sprint tun protected bw

sprint_prot_bw

(Optional) sprint protected flag

sprint_tun_backup_name

(Optional) sprint tun backup name

sprint_tun_lsp_frr_out_active

(Optional) sprint tun lsp frr out active

sprint_tun_frr_protect_level

(Optional) sprint tun frr protect level

sprint_tun_frr_out_nnhop

(Optional) sprint tun frr out nnhop

Command Mode

- /exec

show mpls traffic-eng autoroute

show mpls traffic-eng autoroute [ <ipaddr> ] [ __readonly__ [ <aa_enabled> ] [ { TABLE_dest <aa_fa_tun_list_type> <aa_fa_igp_node_id> <aa_fa_igp_area_id> <aa_fa_tun_count> [ { TABLE_tunidx <aa_fa_intfc_name> [ <aa_fa_load_balance_metric> ] <aa_fa_nexthop_addr> [ <aa_fa_metric_mode> <aa_fa_igp_metric> ] <aa_set> <fa_set> [ <fa_holdtime> ] } ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

autoroute

Autorouted tunnel destination information

ipaddr

(Optional) destination address for autorouted tunnels (A.B.C.D)

__readonly__

(Optional)

aa_enabled

(Optional) is autoroute enabled or disabled

TABLE_dest

(Optional) destination info

aa_fa_tun_list_type

(Optional) autoroute tun list type

aa_fa_igp_node_id

(Optional) autoroute igp node id

aa_fa_igp_area_id

(Optional) autoroute igp area id

aa_fa_tun_count

(Optional) autoroute tun count

TABLE_tunidx

(Optional) tunnel info

aa_fa_intfc_name

(Optional) autoroute intfc name

aa_fa_load_balance_metric

(Optional) autoroute load balance metric

aa_fa_nexthop_addr

(Optional) autoroute nexthop addr

aa_fa_metric_mode

(Optional) autoroute metric mode

aa_fa_igp_metric

(Optional) autoroute igp metric

aa_set

(Optional) autoroute announce

fa_set

(Optional) autoroute fwd adj

fa_holdtime

(Optional) autoroute fwd adj holdtime

Command Mode

- /exec

show mpls traffic-eng exp

show mpls traffic-eng exp [ <ipaddr> ] [ __readonly__ [ TABLE_bundles <exp_bundle_dest> <exp_bundle_master> <exp_bundle_master_state> [ TABLE_exp_member <exp_bundle_member> <exp_bundle_member_state> <exp_bundle_member_conf_exp> <exp_bundle_member_actual_exp> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

exp

MPLS traffic-eng tunnel exp information

ipaddr

(Optional) destination address of the master tunnel (A.B.C.D)

__readonly__

(Optional)

TABLE_bundles

(Optional) Bundle info

exp_bundle_dest

(Optional) Bundle tunnel destination

exp_bundle_master

(Optional) Bundle master tunnel name

exp_bundle_master_state

(Optional) Bundle master tunnel state

TABLE_exp_member

(Optional) Bundle member info

exp_bundle_member

(Optional) Bundle member tunnel name

exp_bundle_member_state

(Optional) Bundle member tunnel state

exp_bundle_member_conf_exp

(Optional) Bundle member tunnel configured exp

exp_bundle_member_actual_exp

(Optional) Bundle member tunnel actual exp

Command Mode

- /exec

show mpls traffic-eng explicit-paths

show mpls traffic-eng explicit-paths [ detail | identifier <id> [ detail ] | name <name> [ detail ] ] [ __readonly__ { TABLE_explpath <eph_style> <eph_path_id_str> <eph_path_loose_strict> <eph_complete_flag> <eph_generation> [ <eph_status> ] { TABLE_nxtaddr <eph_idx> <eph_type> <eph_subtype> <eph_addr> [ <eph_lasthop> ] } } ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

explicit-paths

Show explicit paths

detail

(Optional) Show explicit paths in detail

identifier

(Optional) Show a specific numbered explicit path

id

(Optional) Enter path number

name

(Optional) Show a specific named explicit path

name

(Optional) Enter path name

__readonly__

(Optional)

TABLE_explpath

(Optional) explpath info

eph_style

(Optional) eph style

eph_path_id_str

(Optional) eph path id str

eph_path_loose_strict

(Optional) eph path loose strict

eph_complete_flag

(Optional) eph path complete flag

eph_generation

(Optional) eph generation

eph_status

(Optional) eph status

TABLE_nxtaddr

(Optional) next address

eph_idx

(Optional) eph idx

eph_type

(Optional) eph type

eph_subtype

(Optional) eph subtype

eph_addr

(Optional) eph addr

eph_lasthop

(Optional) eph lasthop

Command Mode

- /exec

show mpls traffic-eng forwarding-adjacency

show mpls traffic-eng forwarding-adjacency [ <ipaddr> ] [ __readonly__ [ <aa_enabled> ] [ { TABLE_dest <aa_fa_tun_list_type> <aa_fa_igp_node_id> <aa_fa_igp_area_id> <aa_fa_tun_count> [ { TABLE_tunidx <aa_fa_intfc_name> [ <aa_fa_load_balance_metric> ] <aa_fa_nexthop_addr> [ <aa_fa_metric_mode> <aa_fa_igp_metric> ] <aa_set> <fa_set> [ <fa_holdtime> ] } ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

forwarding-adjacency

forwarding-adjacency tunnel destination information

ipaddr

(Optional) destination address for forwarding-adjacency tunnels(A.B.C.D)

__readonly__

(Optional)

aa_enabled

(Optional) is autoroute enabled or disabled

TABLE_dest

(Optional) destination info

aa_fa_tun_list_type

(Optional) autoroute tun list type

aa_fa_igp_node_id

(Optional) autoroute igp node id

aa_fa_igp_area_id

(Optional) autoroute igp area id

aa_fa_tun_count

(Optional) autoroute tun count

TABLE_tunidx

(Optional) tunnel info

aa_fa_intfc_name

(Optional) autoroute intfc name

aa_fa_load_balance_metric

(Optional) autoroute load balance metric

aa_fa_nexthop_addr

(Optional) autoroute nexthop addr

aa_fa_metric_mode

(Optional) autoroute metric mode

aa_fa_igp_metric

(Optional) autoroute igp metric

aa_set

(Optional) autoroute announce

fa_set

(Optional) autoroute fwd adj

fa_holdtime

(Optional) autoroute fwd adj holdtime

Command Mode

- /exec

show mpls traffic-eng high-availability

show mpls traffic-eng high-availability { database [ summary ] | shared-database | sso-database | status } [ __readonly__ <__dummy_string__> <__dummy_hex__> <__dummy_int__> <__dummy_unsigned__> <__dummy_long_unsigned__> <__dummy_long_long_unsigned__> ]

Syntax Description

Syntax Description

high-availability

MPLS TE HA information

database

MPLS TE checkpoint database

summary

(Optional) Summary counters only

shared-database

MPLS TE shared database

sso-database

MPLS TE SSO read-write databases

status

MPLS TE HA status and events

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

__readonly__

(Optional)

__dummy_string__

(Optional) dummy string

__dummy_hex__

(Optional) dummy hex

__dummy_int__

(Optional) dummy int

__dummy_unsigned__

(Optional) dummy unsigned

__dummy_long_unsigned__

(Optional) dummy long

__dummy_long_long_unsigned__

(Optional) dummy long long

Command Mode

- /exec

show mpls traffic-eng internal

show mpls traffic-eng internal { stats-polling | counters { forwarding | mts | rsvp-client } | event-history ha | threads [ events | history [ detail ] | samples ] | process-restart igp <sap_id> | mem-stats [ no-libs ] [ detail ] }

Syntax Description

Syntax Description

stats-polling

Info about interface stats polling

counters

Info about internal counters

forwarding

Info about programming forwarding stats

mts

MTS send and receive stats

rsvp-client

Info about rsvp client calls stats

event-history

Show event history of TE

ha

Show high availability history

threads

Info about TE threads

events

(Optional) Histogram of thread events

history

(Optional) Recent thread activity

detail

(Optional) Include extra detail

samples

(Optional) Time samples

process-restart

Info about process restart stats

igp

IGP process restart stats

sap_id

IGP process SAP

mem-stats

Show memory statistics

no-libs

(Optional) Exclude shared lib information

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

internal

Commands for internal use

Command Mode

- /exec

show mpls traffic-eng internal event-history mts

show mpls traffic-eng internal event-history mts

Syntax Description

Syntax Description

event-history

Show event history of TE

mts

Show MTS message history of TE

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

internal

Commands for internal use

Command Mode

- /exec

show mpls traffic-eng link-management

show mpls traffic-eng link-management { admission-control | interfaces | summary } [ <intfc> ] [ __readonly__ [ <tunnel_count> <gmpls_tunnel_count> <tunnels_selected> [ { TABLE_tunnels <tun_name> <uplink_name> <downlink_name> <priority_string> <tun_state> <bw_kbps> <bw_state> <bw_kind> } ] ] [ <links_count> [ <bw_hold_time> ] [ <flooding_system_status> ] [ { TABLE_flooding <flooding_igp_area_id> <flooding_protocol> <flooding_status> <flooding_periodic_status> [ <flooding_periodic_interval> <flooding_periodic_remaining> ] [ <number_of_flooded_links> ] <flooding_igp_system_id> <flooding_rtr_ipaddress> <flooding_neighbor_count> } ] [ TABLE_links <link_name> [ <link_ipaddress> ] [ [ <link_is_numbered> ] [ <local_intfc_id> ] [ <rlp_capability> <rlp_working_priority> ] [ { <srlg_group_none> | { TABLE_srlg <srlg_group_number> } } ] { TABLE_ixcd <link_key> <intfc_switching_cap> <encoding> } [ <link_label_type> <link_installed> [ <link_local_label> ] ] <phys_bw> <phys_bw_units> [ <model_id> ] [ <link_min_flow> <bw_units> ] [ <max_link_rsvbl_bw> <rsvbl_bw_units> <rsvd_up> <rsvd_down> ] <max_global_rsvbl_bw> [ <max_sub_rsvbl_bw> ] <rsvbl_bw_units> <rsvd_up> <rsvd_down> [ <bw_descriptors> [ <descriptor_count> <descriptor_kind> ] ] <link_state> <admit_method_up> <admit_method_down> [ <admin_weight> <admin_state> [ <neighbor_interface_info> [ <interface_name> ] [ { TABLE_nbr_src [ <neighbor_source> ] } ] [ { TABLE_ami_flags <ami_flag_string> } <interface_id> <sw_cap> <source_te_id> <source_up_down> <source_floodable> [ <source_link_lable_id> ] ] ] <igp_neighbor_count> [ { TABLE_igp <neighbor_id> [ <neighbor_ipaddress> ] [ <neighbor_igp_area_id> ] [ <neighbor_link_name> ] <neighbor_up_down> } ] [ <link_up_thresholds> <link_down_thresholds> ] ] [ <flooded_areas> [ { TABLE_dlist <area_tag> <area_id> <area_flooding_status> [ <area_not_flooded_reason> ] } ] ] [ { TABLE_up_down <link_dir_name> <link_dir_bw_kind> <link_dir_bw_units> { TABLE_pool <link_bw_keep_prio> <link_bw_held> <link_bw_total_held> <link_bw_locked> <link_bw_total_locked> } } ] ] ] ] ]

Syntax Description

Syntax Description

link-management

Link Management information

admission-control

Link Management admission-control

interfaces

Link Management Traffic Engineering interfaces

summary

Link Management summary

intfc

(Optional)

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

__readonly__

(Optional)

tunnel_count

(Optional) count of tunnels

gmpls_tunnel_count

(Optional) count of GMPLS tunnels

tunnels_selected

(Optional) count of tunnels selected

TABLE_tunnels

(Optional) tunnel information

tun_name

(Optional) tunnel name

uplink_name

(Optional) uplink name

downlink_name

(Optional) downlink name

priority_string

(Optional) priority string

tun_state

(Optional) tunnel state

bw_kbps

(Optional) bandwidth in KBps

bw_state

(Optional) bandwidth state

bw_kind

(Optional) bandwidth kind

links_count

(Optional) number of links

bw_hold_time

(Optional) bandwidth hold time

flooding_system_status

(Optional) flooding system status

TABLE_flooding

(Optional) flooding info

flooding_igp_area_id

(Optional) flooding IGP area ID

flooding_protocol

(Optional) flooding protocol

flooding_status

(Optional) flooding status

flooding_periodic_status

(Optional) flooding periodic status

flooding_periodic_interval

(Optional) flooding periodic interval

flooding_periodic_remaining

(Optional) flooding periodic remaining

number_of_flooded_links

(Optional) number of flooded links

flooding_igp_system_id

(Optional) flooding IGP system ID

flooding_rtr_ipaddress

(Optional) flooding router address

flooding_neighbor_count

(Optional) flooding neighbor count

TABLE_links

(Optional) table of information for each link

link_name

(Optional) link name

link_ipaddress

(Optional) link IP address

link_is_numbered

(Optional) whether or not the link is numbered

local_intfc_id

(Optional) local interface ID

rlp_capability

(Optional) RLP capability

rlp_working_priority

(Optional) RLP working priority

srlg_group_none

(Optional) no SRLG group numbers

TABLE_srlg

(Optional) SRLGs

srlg_group_number

(Optional) SRLG group number

TABLE_ixcd

(Optional) IXCD

link_key

(Optional) link key

intfc_switching_cap

(Optional) interface switching capacity

encoding

(Optional) interface encoding

link_label_type

(Optional) link label type

link_installed

(Optional) is link installed

link_local_label

(Optional) link local label

phys_bw

(Optional) link physical bandwidth

phys_bw_units

(Optional) link physical bandwidth units

model_id

(Optional) model ID (e.g., MAM, RDM)

link_min_flow

(Optional) link min flow

bw_units

(Optional) bandwidth units

max_link_rsvbl_bw

(Optional) link maximum reservable bandwidth

rsvbl_bw_units

(Optional) reservable bandwidth units

rsvd_up

(Optional) reserved up

rsvd_down

(Optional) reserved down

max_global_rsvbl_bw

(Optional) maximum global reservable bandwidth

max_sub_rsvbl_bw

(Optional) maximum subpool reservable bandwidth

bw_descriptors

(Optional) bandwidth descriptors

descriptor_count

(Optional) bandwidth descriptor count

descriptor_kind

(Optional) descriptor kind

link_state

(Optional) link state

admit_method_up

(Optional) admit method up

admit_method_down

(Optional) admit method down

admin_weight

(Optional) admin weight

admin_state

(Optional) admin state

neighbor_interface_info

(Optional) neighbor interface info

interface_name

(Optional) interface name

TABLE_nbr_src

(Optional) neighbor information

neighbor_source

(Optional) neighbor source

TABLE_ami_flags

(Optional) AMI flags

ami_flag_string

(Optional) AMI flag

interface_id

(Optional) interface ID

sw_cap

(Optional) Sw Cap

source_te_id

(Optional) TE ID

source_up_down

(Optional) is the source up or down

source_floodable

(Optional) is the source floodable

source_link_lable_id

(Optional) link table ID

igp_neighbor_count

(Optional) IGP neighbor count

TABLE_igp

(Optional) IGP information

neighbor_id

(Optional) neighbor's name

neighbor_ipaddress

(Optional) neighbor's IP address

neighbor_igp_area_id

(Optional) neighbor's IGP area ID

neighbor_link_name

(Optional) neighbor's link name

neighbor_up_down

(Optional) is neighbor up or down

link_up_thresholds

(Optional) link up thresholds

link_down_thresholds

(Optional) link down thresholds

flooded_areas

(Optional) number of flooded areas

TABLE_dlist

(Optional) table

area_tag

(Optional) area tag

area_id

(Optional) area ID

area_flooding_status

(Optional) area flooding status

area_not_flooded_reason

(Optional) area not-flooded reason

TABLE_up_down

(Optional) up/down information

link_dir_name

(Optional) link dir name

link_dir_bw_kind

(Optional) link dir bandwidth kind

link_dir_bw_units

(Optional) link dir bandwidth units

TABLE_pool

(Optional) information about each pool

link_bw_keep_prio

(Optional) keep priority

link_bw_held

(Optional) bandwidth held

link_bw_total_held

(Optional) total bandwidth held

link_bw_locked

(Optional) bandwidth locked

link_bw_total_locked

(Optional) total bandwidth locked

Command Mode

- /exec

show mpls traffic-eng link-management advertisements

show mpls traffic-eng link-management advertisements [ __readonly__ <link_flooding_status> <configured_areas> { TABLE_areas <area_tag> <area_id> [ <flooding_protocol> <igp_system_id> <mpls_te_router_ipaddress> <number_of_flooded_links> [ { TABLE_links <link_num> <link_name> <link_subnet_type> [ <link_ipaddress> ] [ <link_local_interface_id> ] [ <link_designated_router> ] [ <link_neighbor_id> ] [ <link_neighbor_ipaddress> ] [ <link_remote_interface_id> ] [ <link_protection_capabilities> <link_protection_working_prio> ] [ <intfc_sw_cap> <link_encoding> { TABLE_flsvc <flsvc> <max_lsp_bw> } <min_lsp_bw> [ <interface_mtu> | <sonet_sdh_indication> ] ] [ <link_te_metric> ] [ <link_igp_metric> ] [ { TABLE_srlgs <link_srlg_number> } | <link_srlg_none> ] <link_bandwidth> <link_bandwidth_units> [ <link_max_res_bandwidth> <link_bandwidth_units> ] <link_global_bc0_bandwidth> <link_bandwidth_units> [ <link_subpool_bc1_bandwidth> <link_bandwidth_units> ] [ <link_dir_down> [ { TABLE_down_classes <link_down_te_class> <link_down_class_bandwidth> <link_down_bandwidth_units> } ] [ { TABLE_down_pools <down_exp_prio> <link_down_global_pool_bc0_bandwidth> [ <link_down_subpool_bc1_bandwidth> ] <link_down_pool_bandwidth_units> } <link_affinity_flags> ] ] [ <link_dir_up> [ { TABLE_up_pools <up_exp_prio> <link_up_global_pool_bc0_bandwidth> [ <link_up_subpool_bc1_bandwidth> ] <link_up_pool_bandwidth_units> } ] ] } ] ] } ]

Syntax Description

Syntax Description

link-management

Link Management information

advertisements

Link Management advertisements

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

__readonly__

(Optional)

link_flooding_status

(Optional) link flooding status

configured_areas

(Optional) configured areas

area_tag

(Optional) area tag

TABLE_areas

(Optional) area info

area_id

(Optional) area ID

flooding_protocol

(Optional) flooding protocol

igp_system_id

(Optional) IGP system ID

mpls_te_router_ipaddress

(Optional) MPLS-TE router IP address

number_of_flooded_links

(Optional) number of flooded links

TABLE_links

(Optional) link info

link_num

(Optional) link number

link_name

(Optional) link name

link_subnet_type

(Optional) link subnet type

link_ipaddress

(Optional) link IP address

link_local_interface_id

(Optional) link local interface ID

link_designated_router

(Optional) link designated router

link_neighbor_id

(Optional) link neighbor ID

link_neighbor_ipaddress

(Optional) link neighbor IP address

link_remote_interface_id

(Optional) link remote interface ID

link_protection_capabilities

(Optional) link protection capabilities

link_protection_working_prio

(Optional) link protection working priority

intfc_sw_cap

(Optional) intfc switching cap

link_encoding

(Optional) link encoding

flsvc

(Optional) flsvc

TABLE_flsvc

(Optional) flsvc info

max_lsp_bw

(Optional) maximum LSP bandwidth

min_lsp_bw

(Optional) minimum LSP bandwidth

interface_mtu

(Optional) interface MTU

sonet_sdh_indication

(Optional) SONET/SDH indication

link_te_metric

(Optional) link TE metric

link_igp_metric

(Optional) link IGP metric

link_srlg_number

(Optional) link SRLG number

TABLE_srlgs

(Optional) SRLG info

link_srlg_none

(Optional) link SRLG -- none

link_bandwidth

(Optional) link bandwidth

link_bandwidth_units

(Optional) link bandwidth units

link_max_res_bandwidth

(Optional) link max res bandwidth

link_global_bc0_bandwidth

(Optional) link global bc0 bandwidth

link_subpool_bc1_bandwidth

(Optional) link subpool bc1 bandwidth

link_dir_down

(Optional) link direction down

TABLE_down_classes

(Optional) direction down class info

link_down_te_class

(Optional) link down TE class

link_down_class_bandwidth

(Optional) link down class bandwidth

link_down_bandwidth_units

(Optional) link down bandwidth units

link_dir_up

(Optional) link direction up

TABLE_up_pools

(Optional) direction up pool info

up_exp_prio

(Optional) up export priority

link_up_global_pool_bc0_bandwidth

(Optional) link up global pool bandwidth

link_up_subpool_bc1_bandwidth

(Optional) link up subpool bandwidth

link_up_pool_bandwidth_units

(Optional) link up pool bandwidth units

TABLE_down_pools

(Optional) direction down pool info

down_exp_prio

(Optional) down export priority

link_down_global_pool_bc0_bandwidth

(Optional) link down global pool bandwidth

link_down_subpool_bc1_bandwidth

(Optional) link down subpool bandwidth

link_down_pool_bandwidth_units

(Optional) link down pool bandwidth units

link_affinity_flags

(Optional) link affinity flags

Command Mode

- /exec

show mpls traffic-eng link-management bandwidth-allocation

show mpls traffic-eng link-management bandwidth-allocation [ summary ] [ <intfc> ] [ __readonly__ [ <links_count> ] [ <bw_hold_time> ] [ <flooding_system_status> ] [ { TABLE_flooding <flooding_igp_area_id> <flooding_protocol> <flooding_status> <flooding_periodic_status> [ <flooding_periodic_interval> ] [ <number_of_flooded_links> ] <flooding_igp_system_id> <flooding_rtr_ipaddress> <flooding_neighbor_count> } ] { TABLE_links <link_name> [ [ <link_global_bc0_bandwidth> ] <link_max_res_bandwidth> <max_global_rsvbl_bw> <link_subpool_bc1_bandwidth> <max_sub_rsvbl_bw> ] [ [ <link_ipaddress> ] [ <link_is_numbered> ] [ <local_intfc_id> ] [ <rlp_capability> <rlp_working_priority> ] [ { <srlg_group_none> | { TABLE_srlg <srlg_group_number> } } ] { TABLE_ixcd <link_key> <intfc_switching_cap> <encoding> } [ <link_label_type> <link_installed> [ <link_local_label> ] ] <phys_bw> <phys_bw_units> [ <model_id> ] [ <link_min_flow> <bw_units> ] [ <max_link_rsvbl_bw> <rsvbl_bw_units> <rsvd_up> <rsvd_down> ] [ <link_max_res_bandwidth> <rsvbl_bw_units> <rsvd_up> <rsvd_down> ] [ <max_global_rsvbl_bw> <rsvbl_bw_units> <rsvd_up> <rsvd_down> ] [ <link_subpool_bc1_bandwidth> <max_sub_rsvbl_bw> <rsvbl_bw_units> <rsvd_up> <rsvd_down> ] [ <bw_descriptors> [ <descriptor_count> <descriptor_kind> ] ] [ <link_state> ] [ <admit_method_up> ] [ <admit_method_down> ] [ <admin_weight> <admin_state> [ <neighbor_interface_info> [ <interface_name> ] [ { TABLE_nbr_src [ <neighbor_source> ] } ] [ { TABLE_ami_flags <ami_flag_string> } <interface_id> <sw_cap> <source_te_id> <source_up_down> <source_floodable> [ <source_link_lable_id> ] ] ] <igp_neighbor_count> [ { TABLE_igp <neighbor_id> <neighbor_ipaddress> [ <neighbor_igp_area_id> ] [ <neighbor_link_name> ] <neighbor_up_down> } ] [ <link_up_thresholds> <link_down_thresholds> ] ] [ <flooded_areas> [ { TABLE_dlist <area_tag> <area_id> <area_flooding_status> [ <area_not_flooded_reason> ] } ] ] [ { TABLE_up_down <link_dir_name> <link_dir_bw_kind> <link_dir_bw_units> { TABLE_pool <link_bw_keep_prio> <link_bw_held> <link_bw_total_held> <link_bw_locked> <link_bw_total_locked> } } ] ] } ]

Syntax Description

Syntax Description

link-management

Link Management information

bandwidth-allocation

Link Management bandwidth-allocation

summary

(Optional) Summary of bandwidth-allocation

intfc

(Optional)

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

__readonly__

(Optional)

links_count

(Optional) number of links

bw_hold_time

(Optional) bandwidth hold time

flooding_system_status

(Optional) flooding system status

TABLE_flooding

(Optional) flooding info

flooding_igp_area_id

(Optional) flooding IGP area ID

flooding_protocol

(Optional) flooding protocol

flooding_status

(Optional) flooding status

flooding_periodic_status

(Optional) flooding periodic status

flooding_periodic_interval

(Optional) flooding periodic interval

number_of_flooded_links

(Optional) number of flooded links

flooding_igp_system_id

(Optional) flooding IGP system ID

flooding_rtr_ipaddress

(Optional) flooding router address

flooding_neighbor_count

(Optional) flooding neighbor count

TABLE_links

(Optional) table of information for each link

link_name

(Optional) link name

link_ipaddress

(Optional) link IP address

link_is_numbered

(Optional) whether or not the link is numbered

local_intfc_id

(Optional) local interface ID

rlp_capability

(Optional) RLP capability

rlp_working_priority

(Optional) RLP working priority

srlg_group_none

(Optional) no SRLG group numbers

TABLE_srlg

(Optional) SRLGs

srlg_group_number

(Optional) SRLG group number

TABLE_ixcd

(Optional) IXCD

link_key

(Optional) link key

intfc_switching_cap

(Optional) interface switching capacity

encoding

(Optional) interface encoding

link_label_type

(Optional) link label type

link_installed

(Optional) is link installed

link_local_label

(Optional) link local label

phys_bw

(Optional) link physical bandwidth

phys_bw_units

(Optional) link physical bandwidth units

model_id

(Optional) model ID (e.g., MAM, RDM)

link_min_flow

(Optional) link min flow

bw_units

(Optional) bandwidth units

max_link_rsvbl_bw

(Optional) link maximum reservable bandwidth

rsvbl_bw_units

(Optional) reservable bandwidth units

rsvd_up

(Optional) reserved up

rsvd_down

(Optional) reserved down

link_max_res_bandwidth

(Optional) link max res bandwidth

max_global_rsvbl_bw

(Optional) maximum global reservable bandwidth

link_subpool_bc1_bandwidth

(Optional) link subpool bc1 res bandwidth

max_sub_rsvbl_bw

(Optional) maximum subpool reservable bandwidth

bw_descriptors

(Optional) bandwidth descriptors

descriptor_count

(Optional) bandwidth descriptor count

descriptor_kind

(Optional) descriptor kind

link_state

(Optional) link state

admit_method_up

(Optional) admit method up

admit_method_down

(Optional) admit method down

admin_weight

(Optional) admin weight

admin_state

(Optional) admin state

neighbor_interface_info

(Optional) neighbor interface info

interface_name

(Optional) interface name

TABLE_nbr_src

(Optional) neighbor information

neighbor_source

(Optional) neighbor source

TABLE_ami_flags

(Optional) AMI flags

ami_flag_string

(Optional) AMI flag

interface_id

(Optional) interface ID

sw_cap

(Optional) Sw Cap

source_te_id

(Optional) TE ID

source_up_down

(Optional) is the source up or down

source_floodable

(Optional) is the source floodable

source_link_lable_id

(Optional) link table ID

igp_neighbor_count

(Optional) IGP neighbor count

TABLE_igp

(Optional) IGP information

neighbor_id

(Optional) neighbor's name

neighbor_ipaddress

(Optional) neighbor's IP address

neighbor_igp_area_id

(Optional) neighbor's IGP area ID

neighbor_link_name

(Optional) neighbor's link name

neighbor_up_down

(Optional) is neighbor up or down

link_up_thresholds

(Optional) link up thresholds

link_down_thresholds

(Optional) link down thresholds

flooded_areas

(Optional) number of flooded areas

TABLE_dlist

(Optional) table

area_tag

(Optional) area tag

area_id

(Optional) area ID

area_flooding_status

(Optional) area flooding status

area_not_flooded_reason

(Optional) area not-flooded reason

TABLE_up_down

(Optional) up/down information

link_dir_name

(Optional) link dir name

link_dir_bw_kind

(Optional) link dir bandwidth kind

link_dir_bw_units

(Optional) link dir bandwidth units

TABLE_pool

(Optional) information about each pool

link_bw_keep_prio

(Optional) keep priority

link_bw_held

(Optional) bandwidth held

link_bw_total_held

(Optional) total bandwidth held

link_bw_locked

(Optional) bandwidth locked

link_bw_total_locked

(Optional) total bandwidth locked

link_global_bc0_bandwidth

(Optional) link global bc0 bandwidth

Command Mode

- /exec

show mpls traffic-eng link-management igp-neighbors ip

show mpls traffic-eng link-management igp-neighbors ip <ipaddr> [ __readonly__ <neighbor_ippeer_hdr_ipaddress> [ TABLE_nbr <neighbor_ippeer_id> <neighbor_ippeer_igp_area_id> <neighbor_ippeer_link_name> ] ]

Syntax Description

Syntax Description

link-management

Link Management information

igp-neighbors

Link Management igp-neighbors

ip

Show neighbors with matching link IP address

ipaddr

neighbor's IP address (A.B.C.D)

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

__readonly__

(Optional)

neighbor_ippeer_hdr_ipaddress

(Optional) header neighbor ip address

TABLE_nbr

(Optional) list of neighbors

neighbor_ippeer_id

(Optional) neighbor ID

neighbor_ippeer_igp_area_id

(Optional) neighbor's IGP area ID

neighbor_ippeer_link_name

(Optional) neighbor link's name

Command Mode

- /exec

show mpls traffic-eng link-management igp-neighbors igp-id isis

show mpls traffic-eng link-management igp-neighbors igp-id { isis <isis-id> | ospf <ospf-ipaddr> } [ __readonly__ <hdr_neighbor_id> [ TABLE_nbr [ <igppeer_neighbor_id> ] <igppeer_neighbor_ipaddress> [ <igppeer_neighbor_igp_area_id> ] [ <igppeer_neighbor_link_name> ] ] ]

Syntax Description

Syntax Description

link-management

Link Management information

igp-neighbors

Link Management igp-neighbors

igp-id

Link Management igp-neighbors by IGP ID

isis

Show neighbors with matching ISIS node ID

isis-id

neighbor's ISIS ID in XX.XXXX. ... .XXX.XX form

ospf

Show neighbors with matching OSPF node ID

ospf-ipaddr

neighbor's OSPF ID (A.B.C.D)

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

__readonly__

(Optional)

hdr_neighbor_id

(Optional) header neighbor id

TABLE_nbr

(Optional) list of neighbors

igppeer_neighbor_id

(Optional) neighbor's name

igppeer_neighbor_igp_area_id

(Optional) neighbor's IGP area ID

igppeer_neighbor_ipaddress

(Optional) neighbor ip address

igppeer_neighbor_link_name

(Optional) neighbor link's name

Command Mode

- /exec

show mpls traffic-eng link-management igp-neighbors

show mpls traffic-eng link-management igp-neighbors [ <intfc> ] [ __readonly__ [ TABLE_link_nbr <hdr_neighbor_link_name> [ TABLE_nbr [ <neighbor_id> [ <neighbor_igp_area_id> ] <neighbor_ipaddress> ] [ <neighbor_up_down> ] [ { TABLE_nbr_src_list <neighbor_source> } ] ] ] ]

Syntax Description

Syntax Description

link-management

Link Management information

igp-neighbors

Link Management igp-neighbors

intfc

(Optional)

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

__readonly__

(Optional)

TABLE_link_nbr

(Optional) list of neighbors on a link

hdr_neighbor_link_name

(Optional) header neighbor link's name

TABLE_nbr

(Optional) list of neighbors

neighbor_id

(Optional) neighbor's name

neighbor_igp_area_id

(Optional) neighbor's IGP area ID

neighbor_ipaddress

(Optional) neighbor's IP address

neighbor_up_down

(Optional) is neighbor up or down

TABLE_nbr_src_list

(Optional) list of sources for a neighbor

neighbor_source

(Optional) neighbor source

Command Mode

- /exec

show mpls traffic-eng link-management statistics

show mpls traffic-eng link-management statistics [ <intfc> ] [ __readonly__ [ <lsp_path_adm_ctr_setup_requests> <lsp_path_adm_ctr_setup_admits> <lsp_path_adm_ctr_setup_rejects> <lsp_path_adm_ctr_setup_errors> <lsp_path_adm_ctr_tear_requests> <lsp_path_adm_ctr_tear_preempts> <lsp_path_adm_ctr_tear_errors> <lsp_resv_adm_ctr_setup_requests> <lsp_resv_adm_ctr_setup_admits> <lsp_resv_adm_ctr_setup_rejects> <lsp_resv_adm_ctr_setup_errors> <lsp_resv_adm_ctr_tear_requests> <lsp_resv_adm_ctr_tear_preempts> <lsp_resv_adm_ctr_tear_errors> [ TABLE_links <link_name> [ <link_ipaddress> ] <up_path_ctr_setup_requests> <up_path_ctr_setup_admits> <up_path_ctr_setup_rejects> <up_path_ctr_setup_errors> <up_path_ctr_tear_requests> <up_path_ctr_tear_preempts> <up_path_ctr_tear_errors> <up_resv_ctr_setup_requests> <up_resv_ctr_setup_admits> <up_resv_ctr_setup_rejects> <up_resv_ctr_setup_errors> <up_resv_ctr_tear_requests> <up_resv_ctr_tear_preempts> <up_resv_ctr_tear_errors> <down_path_ctr_setup_requests> <down_path_ctr_setup_admits> <down_path_ctr_setup_rejects> <down_path_ctr_setup_errors> <down_path_ctr_tear_requests> <down_path_ctr_tear_preempts> <down_path_ctr_tear_errors> <down_resv_ctr_setup_requests> <down_resv_ctr_setup_admits> <down_resv_ctr_setup_rejects> <down_resv_ctr_setup_errors> <down_resv_ctr_tear_requests> <down_resv_ctr_tear_preempts> <down_resv_ctr_tear_errors> ] [ <igp_mem_stats_rims_name> <igp_mem_stats_rims_allocs> <igp_mem_stats_rims_frees> <igp_mem_stats_rims_locks> <igp_mem_stats_rims_unlocks> ] ] ]

Syntax Description

Syntax Description

link-management

Link Management information

statistics

Link Management Traffic Engineering statistics

intfc

(Optional)

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

__readonly__

(Optional)

lsp_path_adm_ctr_setup_requests

(Optional) setup requests

lsp_path_adm_ctr_setup_admits

(Optional) setup admits

lsp_path_adm_ctr_setup_rejects

(Optional) setup rejects

lsp_path_adm_ctr_setup_errors

(Optional) setup errors

lsp_path_adm_ctr_tear_requests

(Optional) tear requests

lsp_path_adm_ctr_tear_preempts

(Optional) tear preempts

lsp_path_adm_ctr_tear_errors

(Optional) tear errors

lsp_resv_adm_ctr_setup_requests

(Optional) setup requests

lsp_resv_adm_ctr_setup_admits

(Optional) setup admits

lsp_resv_adm_ctr_setup_rejects

(Optional) setup rejects

lsp_resv_adm_ctr_setup_errors

(Optional) setup errors

lsp_resv_adm_ctr_tear_requests

(Optional) tear requests

lsp_resv_adm_ctr_tear_preempts

(Optional) tear preempts

lsp_resv_adm_ctr_tear_errors

(Optional) tear errors

TABLE_links

(Optional) table of information for each link

link_name

(Optional) link name

link_ipaddress

(Optional) link IP address

up_path_ctr_setup_requests

(Optional) setup requests

up_path_ctr_setup_admits

(Optional) setup admits

up_path_ctr_setup_rejects

(Optional) setup rejects

up_path_ctr_setup_errors

(Optional) setup errors

up_path_ctr_tear_requests

(Optional) tear requests

up_path_ctr_tear_preempts

(Optional) tear preempts

up_path_ctr_tear_errors

(Optional) tear errors

up_resv_ctr_setup_requests

(Optional) setup requests

up_resv_ctr_setup_admits

(Optional) setup admits

up_resv_ctr_setup_rejects

(Optional) setup rejects

up_resv_ctr_setup_errors

(Optional) setup errors

up_resv_ctr_tear_requests

(Optional) tear requests

up_resv_ctr_tear_preempts

(Optional) tear preempts

up_resv_ctr_tear_errors

(Optional) tear errors

down_path_ctr_setup_requests

(Optional) setup requests

down_path_ctr_setup_admits

(Optional) setup admits

down_path_ctr_setup_rejects

(Optional) setup rejects

down_path_ctr_setup_errors

(Optional) setup errors

down_path_ctr_tear_requests

(Optional) tear requests

down_path_ctr_tear_preempts

(Optional) tear preempts

down_path_ctr_tear_errors

(Optional) tear errors

down_resv_ctr_setup_requests

(Optional) setup requests

down_resv_ctr_setup_admits

(Optional) setup admits

down_resv_ctr_setup_rejects

(Optional) setup rejects

down_resv_ctr_setup_errors

(Optional) setup errors

down_resv_ctr_tear_requests

(Optional) tear requests

down_resv_ctr_tear_preempts

(Optional) tear preempts

down_resv_ctr_tear_errors

(Optional) tear errors

igp_mem_stats_rims_name

(Optional) IGP mem stats RIMS name

igp_mem_stats_rims_allocs

(Optional) IGP mem stats RIMS allocs

igp_mem_stats_rims_frees

(Optional) IGP mem stats RIMS frees

igp_mem_stats_rims_locks

(Optional) IGP mem stats RIMS locks

igp_mem_stats_rims_unlocks

(Optional) IGP mem stats RIMS unlocks

Command Mode

- /exec

show mpls traffic-eng lsp attributes

show mpls traffic-eng lsp attributes [ name <attr-list> ] [ __readonly__ [ <lsp_id_count> <lsp_list_count> ] { TABLE_lspattr [ <lsp_name> <lsp_id_name> ] [ <lsp_sd_command> ] [ <lsp_aff_command> ] [ <lsp_abw_command> ] [ <lsp_bw_command> ] [ <lsp_frr_command> ] [ <lsp_ld_command> ] [ <lsp_prio_command> ] [ <lsp_rec_rte_command> ] } ]

Syntax Description

Syntax Description

lsp

Show LSP information

attributes

Show LSP attribute lists

name

(Optional) Show a specific named attribute list

attr-list

(Optional) Enter list name

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

__readonly__

(Optional)

lsp_id_count

(Optional) lsp id count

lsp_list_count

(Optional) lsp list count

TABLE_lspattr

(Optional) lspattr info

lsp_name

(Optional) lsp name

lsp_id_name

(Optional) lsp id name

lsp_sd_command

(Optional) lsp sd command

lsp_aff_command

(Optional) lsp aff command

lsp_abw_command

(Optional) lsp abw command

lsp_bw_command

(Optional) lsp bw command

lsp_frr_command

(Optional) lsp frr command

lsp_ld_command

(Optional) lsp ld command

lsp_prio_command

(Optional) lsp prio command

lsp_rec_rte_command

(Optional) lsp rec rte command

Command Mode

- /exec

show mpls traffic-eng topology

show mpls traffic-eng topology [ { { <ipaddr> [ ibrief ] } | area <area-id> | level-1 | level-2 | brief | igp-id { isis <isis-id> | ospf <ospf-ipaddr> [ { network | router | brief } ] } } ] [ __readonly__ [ TABLE_areas <hdr_pcalc_system_id> <hdr_pcalc_area_id> ] [ <hdr_pcalc_maxage> ] [ <hdr_pcalc_generation> ] [ <hdr_pcalc_dste_mode> ] [ TABLE_nodes <pcalc_node_system_id> [ [ <pcalc_node_router_id> ] <pcalc_node_type> <pcalc_node_valid_for_spf> <pcalc_node_area_id> [ <pcalc_node_node_id> ] [ TABLE_mg_list <pcalc_mg_id> [ <pcalc_dest_addr> ] ] [ TABLE_links <pcalc_link_index> <pcalc_subnet_type> <pcalc_dr> <pcalc_system_id> <pcalc_node_id> <pcalc_generation> [ <pcalc_frag_id> ] [ <pcalc_ip_addr> ] [ <pcalc_if_id> ] [ <pcalc_nbr_ip_addr> ] [ <pcalc_nbr_if_id> ] [ <pcalc_te_metric> ] [ <pcalc_igp_metric> ] [ <pcalc_affinity> ] [ TABLE_srlgs <pcalc_srlg_number> ] [ <pcalc_switch_cap> <pcalc_encode> ] [ <pcalc_bw> ] [ <pcalc_dste_mode> ] [ TABLE_pcalc_migr <pcalc_migration_mode> <pcalc_migration_bw> ] [ <pcalc_lsp_bw> ] [ TABLE_prios <pcalc_pri> <pcalc_lsp_bw_alloc> <pcalc_lsp_bw_avail> ] [ TABLE_inprogress <pcalc_in_progress_pri> <pcalc_in_progress_bw> <pcalc_in_progress_sub_bw> ] ] ] ] ]

Syntax Description

Syntax Description

topology

Show topology commands

ipaddr

(Optional) Show topology based on router-id or interface ip address (A.B.C.D)

area

(Optional) restrict output to an OSPF area

area-id

(Optional) OSPF area ID as a decimal value

level-1

(Optional) restrict output to an IS-IS level-1

level-2

(Optional) restrict output to an IS-IS level-2

ibrief

(Optional) Use brief format

brief

(Optional) Use brief format

igp-id

(Optional) Show topology based on igp-id

isis

(Optional) Show topology based on isis igp-id

isis-id

(Optional) ISIS ID in XX.XXXX. ... .XXX.XX form

ospf

(Optional) Show traffic-eng topology based on ospf igp-id

ospf-ipaddr

(Optional) igp ipaddr Id (A.B.C.D)

network

(Optional) node type is network

router

(Optional) node type is router

brief

(Optional) Use brief format

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

__readonly__

(Optional)

TABLE_areas

(Optional) areas info

hdr_pcalc_system_id

(Optional) pcalc system id

hdr_pcalc_area_id

(Optional) pcalc area id

hdr_pcalc_maxage

(Optional) pcalc maxage

hdr_pcalc_generation

(Optional) pcalc generation

hdr_pcalc_dste_mode

(Optional) pcalc dste mode

TABLE_nodes

(Optional) nodes info

pcalc_node_system_id

(Optional) pcalc system id

pcalc_node_router_id

(Optional) pcalc router id

pcalc_node_type

(Optional) pcalc node type

pcalc_node_valid_for_spf

(Optional) pcalc valid for spf

pcalc_node_area_id

(Optional) pcalc area id

pcalc_node_node_id

(Optional) pcalc node id

TABLE_mg_list

(Optional) mg_list info

pcalc_mg_id

(Optional) pcalc mg id

pcalc_dest_addr

(Optional) pcalc dest addr

TABLE_links

(Optional) links info

pcalc_link_index

(Optional) pcalc link index

pcalc_subnet_type

(Optional) pcalc subnet type

pcalc_dr

(Optional) pcalc dr

pcalc_system_id

(Optional) pcalc system id

pcalc_node_id

(Optional) pcalc node id

pcalc_generation

(Optional) pcalc generation

pcalc_frag_id

(Optional) pcalc frag id

pcalc_ip_addr

(Optional) pcalc ip addr

pcalc_if_id

(Optional) pcalc if id

pcalc_nbr_ip_addr

(Optional) pcalc nbr ip addr

pcalc_nbr_if_id

(Optional) pcalc nbr if id

pcalc_te_metric

(Optional) pcalc TE metric

pcalc_igp_metric

(Optional) pcalc IGP metric

pcalc_affinity

(Optional) pcalc affinity

TABLE_srlgs

(Optional) srlgs info

pcalc_srlg_number

(Optional) pcalc srlg number

pcalc_switch_cap

(Optional) pcalc switch cap

pcalc_encode

(Optional) pcalc encode

pcalc_bw

(Optional) pcalc bw

pcalc_dste_mode

(Optional) pcalc dste mode

TABLE_pcalc_migr

(Optional) pcalc migration info

pcalc_migration_mode

(Optional) pcalc migration mode

pcalc_migration_bw

(Optional) pcalc migration bw

pcalc_lsp_bw

(Optional) pcalc lsp bw

TABLE_prios

(Optional) prios info

pcalc_pri

(Optional) pcalc pri

pcalc_lsp_bw_alloc

(Optional) pcalc lsp bw alloc

pcalc_lsp_bw_avail

(Optional) pcalc lsp bw avail

TABLE_inprogress

(Optional) in progress info

pcalc_in_progress_pri

(Optional) pcalc in progress priority

pcalc_in_progress_bw

(Optional) pcalc in progress bw

pcalc_in_progress_sub_bw

(Optional) pcalc in progress sub bw

Command Mode

- /exec

show mpls traffic-eng topology path

show mpls traffic-eng topology path { <tunnel-intf> [ destination <ipaddr> ] | destination <ipaddr> } [ bandwidth <kbps> | { priority <take-priority> [ <keep-priority> ] } | { affinity <affinity-value> [ mask <mask-value> ] } ] + [ __readonly__ <path_dest_ipaddr> <path_bw> <path_setup_pri> <path_hold_pri> <path_affinity_value> <path_affinity_mask> [ <path_match> <path_dest_ipaddr> ] [ <path_min_bw> ] [ <path_max_bw> ] [ TABLE_hops <path_n_hop> [ <path_hop_link_id> ] [ <path_hop_affinity_value> ] [ <path_hop_available_bw> ] [ <path_hop_dest_ipaddr> ] ] ]

Syntax Description

Syntax Description

topology

Show topology commands

path

MPLS traffic-eng path information

tunnel-intf

Tunnel interface

destination

(Optional) Specify LSP destination address

ipaddr

(Optional) destination address (A.B.C.D)

bandwidth

(Optional) Specify LSP bandwidth

kbps

(Optional) bandwidth in kbps

priority

(Optional) Specify LSP priority

take-priority

(Optional) setup (take) priority

keep-priority

(Optional) hold (keep) priority

affinity

(Optional) Specify LSP affinity

affinity-value

(Optional) affinity value

mask

(Optional) Specify LSP affinity mask

mask-value

(Optional) affinity mask value

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

__readonly__

(Optional)

path_dest_ipaddr

(Optional) path dest ipaddr

path_bw

(Optional) path bw

path_setup_pri

(Optional) path setup pri

path_hold_pri

(Optional) path hold pri

path_affinity_value

(Optional) path affinity value

path_affinity_mask

(Optional) path affinity mask

path_match

(Optional) path match

path_min_bw

(Optional) path min bw

path_max_bw

(Optional) path min bw

TABLE_hops

(Optional) hops info

path_n_hop

(Optional) path n hop

path_hop_link_id

(Optional) path hop link id

path_hop_affinity_value

(Optional) path hop affinity value

path_hop_available_bw

(Optional) path hop available bw

path_hop_dest_ipaddr

(Optional) path hop dest ipaddr

Command Mode

- /exec

show mpls traffic-eng tunnels

show mpls traffic-eng tunnels { summary | { <tun-intf> } [ brief | statistics | accounting | backup | protection ] | { { [ destination <address> ] [ source-id { <ipaddress> | <tunnel-id> | <ipaddress> <tunnel-id> } ] [ role { all | head | middle | tail | remote } ] [ { up | down } ] [ suboptimal constraints { none | current | max } ] [ property { backup-tunnel | fast-reroute } ] [ frrstate { ready | active } ] [ name <string> | name-regexp <regexp-string> ] [ interface { in <in-intf> | out <out-intf> | <phys-intf> | backup <bkup-intf> } ] [ attributes <attr-string> ] } + [ brief | statistics [ summary ] | accounting | backup | protection ] } } [ __readonly__ [ [ [ <tun_process_signaller_status> ] [ <passive_listener_running> ] [ <rsvp_running> ] [ <forwarding_configured> ] [ <head_vifs> <heads_active> <heads_est> <heads_activated> <heads_deactivated> <recov_attempts> <recovered> <midpoints> <tails> ] [ <reopt_interval> <reopt_remaining> ] [ <reopt_running> ] [ <frr_promote_interval> <frr_promote_remaining> ] [ <frr_promote_running> ] [ <frr_onehop_est_interval> <frr_onehop_est_remaining> ] [ <frr_est_scan_running> ] [ <frr_rm_active_est_interval> <frr_rm_active_est_remaining> ] [ <frr_active_scan_running> ] [ <frr_bu_notinuse_interval> <frr_bu_notinuse_remaining> ] [ <frr_bu_notinuse_scan_running> ] [ <auto_bw_coll_interval> <auto_bw_coll_remaining> ] [ <auto_bw_coll_running> ] [ <reeval_interval> <reeval_remaining> ] [ <reeval_running> ] ] [ TABLE_tunnels_brief <tun_brief_name> <tun_brief_dest_ip> [ <tun_brief_uplink> ] [ <tun_brief_downlink> ] <tun_brief_gen_status> <tun_brief_conn_status> ] ] [ TABLE_tunnels_protect [ <prot_tunnel_role> ] <prot_name> <prot_head_name> <prot_gen_status> <prot_conn_status> <prot_tsp_src_ipaddr> <prot_tsp_dst_ipaddr> <prot_tsp_tun_instances> [ [ <backup_none> ] [ TABLE_frr_backup_db <bu_protected_intfcs> ] [ <bu_num_lsps> <bu_num_active_lsps> ] [ <bu_bw_any_unlimited_inuse> ] [ <bu_bw_any_limit> <bu_bw_any_limited_inuse> <bu_bw_any_limited_bwp_inuse> ] [ <bu_bw_sub_limit> <bu_bw_sub_limited_inuse> [ <bu_bw_sub_limited_bwp_inuse> ] ] [ <bu_bw_global_limit> <bu_bw_global_limited_inuse> [ <bu_bw_global_limited_bwp_inuse> ] ] ] [ <frr_protection_none> ] [ <no_rsvp_info> ] [ <in_frr_is_active> <in_orig_intfc> <in_tun_tag_label> <in_frr_orig_phop> [ <in_intfc_with_frr> <in_frr_phop> ] ] [ <unprotected> <out_orig_name> <out_tun_tag_label> <out_lsp_orig_phop> [ <nhop_is_tail> ] [ <no_frr_nnhop_info> ] [ <out_frr_orig_nnhop> <out_frr_orig_nnhop_rtr> ] ] [ <frr_active_or_ready> <frr_backup_lsp_intfc> <frr_nnhop_or_nhop> <frr_out_backup_intfc> <lsp_out_intfc> <frr_backup_lsp_out_label> <frr_orig_out_intfc> <frr_orig_out_label> <frr_orig_out_nhop> [ <frr_backup_nnhop> <frr_backup_nnhop_rtr> ] <frr_backup_intfc> <frr_backup_label> <frr_protected_bw> <frr_protect_level> <frr_bw_type> ] [ [ TABLE_prot_protection [ <protection_path_status> ] [ <protection_common_links> ] [ <protection_common_nodes> ] [ <protection_p2p_links> <protection_multiaccess_links> <protection_both_interfaces> <protection_one_interface> <protection_zero_interfaces> ] [ TABLE_primary_protection <protection_primary_path> ] [ TABLE_protect_protection <protection_protect_path> ] [ <protection_type> <protection_autobw_req> <protection_bw_kbps> <protection_setup_pri> <protection_hold_pri> <protection_affinity_value> <protection_affinity_mask> <protection_metric_type> ] [ [ [ <protection_in_name> ] [ <protection_in_label> ] [ <protection_out_name> ] [ <protection_out_label> ] [ <protection_backup_name> ] [ <protection_backup_label> ] [ <protection_frr_active> ] ] [ <protection_rsvp_lsp_source_addr> <protection_rsvp_lsp_dest_addr> <protection_rsvp_lsp_dest_port> <protection_rsvp_lsp_source_port> <protection_rsvp_lsp_local_addr> ] [ { TABLE_ero_in_protection [ <in_protection_rsvp_ero_addr> <in_protection_rsvp_ero_loose> ] [ <in_protection_rsvp_ero_routerid> <in_protection_rsvp_ero_if_id> ] } ] [ { TABLE_ero_out_protection [ <out_protection_rsvp_ero_addr> <out_protection_rsvp_ero_loose> ] [ <out_protection_rsvp_ero_routerid> <out_protection_rsvp_ero_if_id> ] } ] [ { TABLE_rro_protection [ <protection_rsvp_rro_addr> ] [ <protection_rsvp_rro_protect_avail> ] [ <protection_rsvp_rro_protect_in_use> ] [ <protection_rsvp_rro_bw_protected> ] [ <protection_rsvp_rro_node_protect_avail> ] [ <protection_rsvp_rro_is_node_id> ] [ <protection_rsvp_rro_if_addr> <protection_rsvp_rro_if_id> ] [ <protection_rsvp_rro_label> ] } ] [ [ <protection_rsvp_tspec_rate> ] [ <protection_rsvp_tspec_burst> ] [ <protection_rsvp_tspec_peak> ] ] [ { TABLE_rro_resv_protection [ <resv_protection_rsvp_rro_addr> ] [ <resv_protection_rsvp_rro_protect_avail> ] [ <resv_protection_rsvp_rro_protect_in_use> ] [ <resv_protection_rsvp_rro_bw_protected> ] [ <resv_protection_rsvp_rro_node_protect_avail> ] [ <resv_protection_rsvp_rro_is_node_id> ] [ <resv_protection_rsvp_rro_if_addr> <resv_protection_rsvp_rro_if_id> ] [ <resv_protection_rsvp_rro_label> ] } ] [ [ <protection_rsvp_fspec_rate> ] [ <protection_rsvp_fspec_burst> ] [ <protection_rsvp_fspec_peak> ] ] ] ] ] ] [ TABLE_tunnels [ <vif_head_name> ] [ <lsp_name> ] [ <sprint_tun_name_stats> ] [ <tunnels_shown> ] [ <dest_intf> ] [ [ <lm_tunnel_name_stats> ] [ <tsp_dest_ipaddr_stats> ] [ <vif_head_name_stats> ] [ [ <tsp_cnt_num_tunnels> ] <tsp_cnt_idx_no_path> <tsp_cnt_idx_inval_path> <tsp_cnt_idx_no_iep> <tsp_cnt_idx_pathchg> <tsp_cnt_idx_loose_reopt> <tsp_cnt_idx_statechg> <tsp_cnt_idx_tun_down> <tsp_cnt_idx_oper_down> <tsp_cnt_idx_sig_ok> <tsp_cnt_idx_sig_timeout> <tsp_cnt_idx_bad_path> <tsp_cnt_idx_sig_abort> <tsp_cnt_idx_nobw> <tsp_cnt_idx_noroute> <tsp_cnt_idx_admin> <tsp_cnt_idx_bad> <tsp_cnt_idx_rro_loop> <tsp_cnt_idx_frr_active> <tsp_cnt_idx_other> [ TABLE_rrr_db <tsp_rrr_db_type> <tsp_rrr_db_in_use> <tsp_rrr_db_allocated> <tsp_rrr_db_freed> ] [ <he_mgr_tbl_id> ] [ <lm_mgr_tbl_id> ] ] [ <time_passed> <output_rate> <packet_rate> <normalized> ] ] [ <sprint_tun_name> <tsp_dest_ipaddr> ] [ <lm_tunnel_name> ] [ <gen_status> ] [ <conn_status> ] [ <tsp_setup_valid> ] [ <tsp_setup_status> ] [ TABLE_members [ <member_name> [ TABLE_member_exp [ <member_exp_bits> ] ] [ <member_default_exp_bit> ] ] ] [ [ <current_reopt_in_progress> ] [ <current_delayed_clean> ] [ <current_popt_protect> <current_popt_idx_str> <current_popt_lockdown> <current_popt_type_str> <current_popt_verbatim> <current_popt_path_id> [ <current_popt_accum_admin_weight> ] [ <current_popt_out_interface_name> [ <current_popt_label_str> <current_popt_int_prop> ] [ <current_popt_label_raw_value> ] ] ] [ <current_fwd_adj_hold_up_ms_remaining> ] [ <current_reroute_pending> ] [ <current_type> <current_autobw_req> <current_bw_kbps> <current_setup_pri> <current_hold_pri> <current_affinity_value> <current_affinity_mask> <current_metric_type> ] [ [ TABLE_prot_current [ <current_path_status> ] [ <current_common_links> ] [ <current_common_nodes> ] [ <current_p2p_links> <current_multiaccess_links> <current_both_interfaces> <current_one_interface> <current_zero_interfaces> ] [ TABLE_primary_current <current_primary_path> ] [ TABLE_protect_current <current_protect_path> ] [ <current_type> <current_autobw_req> <current_bw_kbps> <current_setup_pri> <current_hold_pri> <current_affinity_value> <current_affinity_mask> <current_metric_type> ] [ [ [ <current_in_name> ] [ <current_in_label> ] [ <current_out_name> ] [ <current_out_label> ] [ <current_backup_name> ] [ <current_backup_label> ] [ <current_frr_active> ] ] [ <current_rsvp_lsp_source_addr> <current_rsvp_lsp_dest_addr> <current_rsvp_lsp_dest_port> <current_rsvp_lsp_source_port> <current_rsvp_lsp_local_addr> ] [ { TABLE_ero_in_current [ <in_current_rsvp_ero_addr> <in_current_rsvp_ero_loose> ] [ <in_current_rsvp_ero_routerid> <in_current_rsvp_ero_if_id> ] } ] [ { TABLE_ero_out_current [ <out_current_rsvp_ero_addr> <out_current_rsvp_ero_loose> ] [ <out_current_rsvp_ero_routerid> <out_current_rsvp_ero_if_id> ] } ] [ { TABLE_rro_current [ <current_rsvp_rro_addr> ] [ <current_rsvp_rro_protect_avail> ] [ <current_rsvp_rro_protect_in_use> ] [ <current_rsvp_rro_bw_protected> ] [ <current_rsvp_rro_node_protect_avail> ] [ <current_rsvp_rro_is_node_id> ] [ <current_rsvp_rro_if_addr> <current_rsvp_rro_if_id> ] [ <current_rsvp_rro_label> ] } ] [ [ <current_rsvp_tspec_rate> ] [ <current_rsvp_tspec_burst> ] [ <current_rsvp_tspec_peak> ] ] [ { TABLE_rro_resv_current [ <resv_current_rsvp_rro_addr> ] [ <resv_current_rsvp_rro_protect_avail> ] [ <resv_current_rsvp_rro_protect_in_use> ] [ <resv_current_rsvp_rro_bw_protected> ] [ <resv_current_rsvp_rro_node_protect_avail> ] [ <resv_current_rsvp_rro_is_node_id> ] [ <resv_current_rsvp_rro_if_addr> <resv_current_rsvp_rro_if_id> ] [ <resv_current_rsvp_rro_label> ] } ] [ [ <current_rsvp_fspec_rate> ] [ <current_rsvp_fspec_burst> ] [ <current_rsvp_fspec_peak> ] ] ] ] ] [ <prot_current_popt_protect> <prot_current_popt_idx_str> <prot_current_popt_lockdown> <prot_current_popt_type_str> <prot_current_popt_verbatim> <prot_current_popt_path_id> [ <prot_current_popt_accum_admin_weight> ] [ <prot_current_popt_out_interface_name> [ <prot_current_popt_label_str> <prot_current_popt_int_prop> ] [ <prot_current_popt_label_raw_value> ] ] ] ] [ TABLE_popts [ [ <popts_reopt_in_progress> ] [ <popts_delayed_clean> ] [ <popts_popt_protect> <popts_popt_idx_str> <popts_popt_lockdown> <popts_popt_type_str> <popts_popt_verbatim> <popts_popt_path_id> [ <popts_popt_accum_admin_weight> ] [ <popts_popt_out_interface_name> [ <popts_popt_label_str> <popts_popt_int_prop> ] [ <popts_popt_label_raw_value> ] ] ] [ <popts_fwd_adj_hold_up_ms_remaining> ] [ <popts_reroute_pending> ] [ <popts_type> <popts_autobw_req> <popts_bw_kbps> <popts_setup_pri> <popts_hold_pri> <popts_affinity_value> <popts_affinity_mask> <popts_metric_type> ] [ [ TABLE_prot_popts [ <popts_path_status> ] [ <popts_common_links> ] [ <popts_common_nodes> ] [ <popts_p2p_links> <popts_multiaccess_links> <popts_both_interfaces> <popts_one_interface> <popts_zero_interfaces> ] [ TABLE_primary_popts <popts_primary_path> ] [ TABLE_protect_popts <popts_protect_path> ] [ <popts_type> <popts_autobw_req> <popts_bw_kbps> <popts_setup_pri> <popts_hold_pri> <popts_affinity_value> <popts_affinity_mask> <popts_metric_type> ] [ [ [ <popts_in_name> ] [ <popts_in_label> ] [ <popts_out_name> ] [ <popts_out_label> ] [ <popts_backup_name> ] [ <popts_backup_label> ] [ <popts_frr_active> ] ] [ <popts_rsvp_lsp_source_addr> <popts_rsvp_lsp_dest_addr> <popts_rsvp_lsp_dest_port> <popts_rsvp_lsp_source_port> <popts_rsvp_lsp_local_addr> ] [ { TABLE_ero_in_popts [ <in_popts_rsvp_ero_addr> <in_popts_rsvp_ero_loose> ] [ <in_popts_rsvp_ero_routerid> <in_popts_rsvp_ero_if_id> ] } ] [ { TABLE_ero_out_popts [ <out_popts_rsvp_ero_addr> <out_popts_rsvp_ero_loose> ] [ <out_popts_rsvp_ero_routerid> <out_popts_rsvp_ero_if_id> ] } ] [ { TABLE_rro_popts [ <popts_rsvp_rro_addr> ] [ <popts_rsvp_rro_protect_avail> ] [ <popts_rsvp_rro_protect_in_use> ] [ <popts_rsvp_rro_bw_protected> ] [ <popts_rsvp_rro_node_protect_avail> ] [ <popts_rsvp_rro_is_node_id> ] [ <popts_rsvp_rro_if_addr> <popts_rsvp_rro_if_id> ] [ <popts_rsvp_rro_label> ] } ] [ [ <popts_rsvp_tspec_rate> ] [ <popts_rsvp_tspec_burst> ] [ <popts_rsvp_tspec_peak> ] ] [ { TABLE_rro_resv_popts [ <resv_popts_rsvp_rro_addr> ] [ <resv_popts_rsvp_rro_protect_avail> ] [ <resv_popts_rsvp_rro_protect_in_use> ] [ <resv_popts_rsvp_rro_bw_protected> ] [ <resv_popts_rsvp_rro_node_protect_avail> ] [ <resv_popts_rsvp_rro_is_node_id> ] [ <resv_popts_rsvp_rro_if_addr> <resv_popts_rsvp_rro_if_id> ] [ <resv_popts_rsvp_rro_label> ] } ] [ [ <popts_rsvp_fspec_rate> ] [ <popts_rsvp_fspec_burst> ] [ <popts_rsvp_fspec_peak> ] ] ] ] ] [ <prot_popts_popt_protect> <prot_popts_popt_idx_str> <prot_popts_popt_lockdown> <prot_popts_popt_type_str> <prot_popts_popt_verbatim> <prot_popts_popt_path_id> [ <prot_popts_popt_accum_admin_weight> ] [ <prot_popts_popt_out_interface_name> [ <prot_popts_popt_label_str> <prot_popts_popt_int_prop> ] [ <prot_popts_popt_label_raw_value> ] ] ] ] ] [ <passive_dest_ipaddr> <passive_tunnnel_id> <passive_incomplete_properties> <passive_dest_str> ] [ <config_type> <config_autobw_req> <config_bw_kbps> <config_setup_pri> <config_hold_pri> <config_affinity_value> <config_affinity_mask> <config_metric_type> ] [ <tsp_flg_annc> ] [ <tsp_active_popt_enbl> ] [ <fa_holdtime> ] [ <tsp_autobw_freq> <tsp_autobw_time_left> <tsp_autobw_time_max> <tsp_autobw_collect> <tsp_autobw_high_or_req> <tsp_autobw_samp_missed> <tsp_autobw_samp_collected> ] [ <auto_bw_disabled> ] [ <active_popt_type_str> <active_popt_idx_str> <active_popt_bw_override_enabled> <active_popt_lockdown_enabled> <active_popt_verbatim_enabled> [ <active_bw> <active_bw_pool> [ <active_autobw> <active_autobw_pool> ] [ <active_cfg_bw> <active_cfg_bw_pool> ] ] ] [ <passive_sig_name> <passive_sig_setup> <passive_sig_reserv> ] [ [ [ <rsvp_current_in_name> ] [ <rsvp_current_in_label> ] [ <rsvp_current_out_name> ] [ <rsvp_current_out_label> ] [ <rsvp_current_backup_name> ] [ <rsvp_current_backup_label> ] [ <rsvp_current_frr_active> ] ] [ <rsvp_current_rsvp_lsp_source_addr> <rsvp_current_rsvp_lsp_dest_addr> <rsvp_current_rsvp_lsp_dest_port> <rsvp_current_rsvp_lsp_source_port> <rsvp_current_rsvp_lsp_local_addr> ] [ { TABLE_ero_in_rsvp_current [ <in_rsvp_current_rsvp_ero_addr> <in_rsvp_current_rsvp_ero_loose> ] [ <in_rsvp_current_rsvp_ero_routerid> <in_rsvp_current_rsvp_ero_if_id> ] } ] [ { TABLE_ero_out_rsvp_current [ <out_rsvp_current_rsvp_ero_addr> <out_rsvp_current_rsvp_ero_loose> ] [ <out_rsvp_current_rsvp_ero_routerid> <out_rsvp_current_rsvp_ero_if_id> ] } ] [ { TABLE_rro_rsvp_current [ <rsvp_current_rsvp_rro_addr> ] [ <rsvp_current_rsvp_rro_protect_avail> ] [ <rsvp_current_rsvp_rro_protect_in_use> ] [ <rsvp_current_rsvp_rro_bw_protected> ] [ <rsvp_current_rsvp_rro_node_protect_avail> ] [ <rsvp_current_rsvp_rro_is_node_id> ] [ <rsvp_current_rsvp_rro_if_addr> <rsvp_current_rsvp_rro_if_id> ] [ <rsvp_current_rsvp_rro_label> ] } ] [ [ <rsvp_current_rsvp_tspec_rate> ] [ <rsvp_current_rsvp_tspec_burst> ] [ <rsvp_current_rsvp_tspec_peak> ] ] [ { TABLE_rro_resv_rsvp_current [ <resv_rsvp_current_rsvp_rro_addr> ] [ <resv_rsvp_current_rsvp_rro_protect_avail> ] [ <resv_rsvp_current_rsvp_rro_protect_in_use> ] [ <resv_rsvp_current_rsvp_rro_bw_protected> ] [ <resv_rsvp_current_rsvp_rro_node_protect_avail> ] [ <resv_rsvp_current_rsvp_rro_is_node_id> ] [ <resv_rsvp_current_rsvp_rro_if_addr> <resv_rsvp_current_rsvp_rro_if_id> ] [ <resv_rsvp_current_rsvp_rro_label> ] } ] [ [ <rsvp_current_rsvp_fspec_rate> ] [ <rsvp_current_rsvp_fspec_burst> ] [ <rsvp_current_rsvp_fspec_peak> ] ] ] [ [ <spf_path_info_str> ] [ <spfw_pathw_str> ] [ <spfw_unknown_str> ] [ <spfw_accum_admin_weigth> ] [ <spfw_metric_type> ] [ <spf_exp_prefix> ] [ <spf_hop_unknown> ] [ TABLE_spf_hoplist <spf_hop_ipaddr> [ <spf_hop_intf> ] ] ] [ [ <hist_create_time> ] [ <hist_path_change_time> ] [ <hist_tun_instances> ] [ <hist_uptime> ] [ <hist_setup_time> ] [ <hist_selection> ] [ <hist_perr_loc_current> ] [ <hist_perr_desc_current> ] [ <hist_uptime_reopt> ] [ <hist_setup_time_reopt> ] [ <hist_perr_loc_reopt> ] [ <hist_perr_desc_reopt> ] [ <hist_prev_popt_idx_str> ] [ <hist_prev_instance> ] [ <hist_prev_unknown> ] [ <hist_setup_fail_reason> ] [ <hist_perr_loc_prev> ] [ <hist_perr_desc_prev> ] [ <hist_other_po_idx> ] [ <hist_perr_loc_other> ] [ <hist_perr_desc_other> ] ] ] [ <heads_shown> <head_vifs> <mids_shown> <midpoints> <tails_shown> <tails> ] ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

tunnels

MPLS traffic-eng tunnel status

summary

Show summary information

tun-intf

Tunnel interface

brief

(Optional) Brief summary of tunnel status and configuration

statistics

(Optional) Tunnel counters and statistics

accounting

(Optional) Tunnel accounting

backup

(Optional) Fast reroute backup protection provided by tunnels

protection

(Optional) Failure protection provided for tunnels

destination

(Optional) Restrict display to tunnels with this destination

address

(Optional) tunnel destination address

source-id

(Optional) Tunnel identifier address/id

ipaddress

(Optional) Source address part of tunnel identifier

tunnel-id

(Optional) Number part of tunnel identifier

role

(Optional) Restrict display to tunnels with specified role

all

(Optional) head, middle, or tail LSP tunnels

head

(Optional) tunnels that originate locally

middle

(Optional) tunnels that transit locally

tail

(Optional) tunnels that terminate locally

remote

(Optional) middle or tail tunnels

up

(Optional) Restrict display to tunnels in up state

down

(Optional) Restrict display to tunnels in down state

suboptimal

(Optional) Restrict display to tunnels using a suboptimal path

constraints

(Optional) Specify constraints for finding best comparison path

none

(Optional) path lookup without any constraints

current

(Optional) path lookup constrained by available resources

max

(Optional) path lookup constrained by network's maximum potential resources

property

(Optional) Restrict display to tunnels with specified property

backup-tunnel

(Optional) Tunnels used as fast reroute

fast-reroute

(Optional) Tunnels protected by fast reroute

frrstate

(Optional) Restrict display to tunnels with specific frr state

ready

(Optional) Tunnels in FRR ready state

active

(Optional) Tunnels in FRR active state

name

(Optional) Restrict display to tunnels with this name

string

(Optional) LSP Tunnel name

name-regexp

(Optional) Restrict display to tunnels matching this name

regexp-string

(Optional) LSP Tunnel name (regular expression)

interface

(Optional) Restrict display to tunnels using a specified interface

in

(Optional) input interface

in-intf

(Optional)

out

(Optional) output interface

out-intf

(Optional)

phys-intf

(Optional)

backup

(Optional) Fast reroute backup protection provided by tunnels

bkup-intf

(Optional)

attributes

(Optional) Restrict display to tunnels using a matching attribute list

attr-string

(Optional) LSP attribute list name (regular expression)

brief

(Optional) Brief summary of tunnel status and configuration

statistics

(Optional) Tunnel counters and statistics

summary

(Optional) Summarize tunnel counters and statistics

accounting

(Optional) Tunnel accounting

protection

(Optional) Failure protection provided for tunnels

__readonly__

(Optional)

tun_process_signaller_status

(Optional) tunnel process signaller status

passive_listener_running

(Optional) is the passive listener running

forwarding_configured

(Optional) is forwarding configured

rsvp_running

(Optional) is RSVP running

head_vifs

(Optional) head VIFs

heads_active

(Optional) number of active heads

heads_est

(Optional) heads est

heads_activated

(Optional) number of heads activated

heads_deactivated

(Optional) number of heads deactivated

recov_attempts

(Optional) number of recovery attempts

recovered

(Optional) number recovered

midpoints

(Optional) number of midpoints

tails

(Optional) number of tails

reopt_interval

(Optional) reopt interval

reopt_remaining

(Optional) reopt remaining

reopt_running

(Optional) reopt is running

frr_promote_interval

(Optional) FRR promote interval

frr_promote_remaining

(Optional) FRR promote remaining

frr_promote_running

(Optional) FRR promote is running

frr_onehop_est_interval

(Optional) FRR one hop est interval

frr_onehop_est_remaining

(Optional) FRR one hop est remaining

frr_est_scan_running

(Optional) FRR est scan is running

frr_rm_active_est_interval

(Optional) FRR rm active est interval

frr_rm_active_est_remaining

(Optional) FRR rm active est remaining

frr_active_scan_running

(Optional) FRR active scan is running

frr_bu_notinuse_interval

(Optional) FRR BU not in use interval

frr_bu_notinuse_remaining

(Optional) FRR BU not in use remaining

frr_bu_notinuse_scan_running

(Optional) FRR BU not in use scan is running

auto_bw_coll_interval

(Optional) auto BW coll interval

auto_bw_coll_remaining

(Optional) auto BW coll remaining

auto_bw_coll_running

(Optional) auto BW coll is running

reeval_interval

(Optional) re-eval interval

reeval_remaining

(Optional) re-eval remaining

reeval_running

(Optional) re-eval is running

TABLE_tunnels_brief

(Optional) tunnels brief

tun_brief_name

(Optional) name

tun_brief_dest_ip

(Optional) destinatin IP address

tun_brief_uplink

(Optional) uplink name

tun_brief_downlink

(Optional) down name

tun_brief_gen_status

(Optional) gen status

tun_brief_conn_status

(Optional) connection status

gen_status

(Optional) gen status

conn_status

(Optional) conn status

tsp_setup_valid

(Optional) tsp setup valid

tsp_setup_status

(Optional) tsp setup status

TABLE_tunnels

(Optional) tunnel information

vif_head_name

(Optional) vif head name

tunnels_shown

(Optional) tunnels shown

lm_tunnel_name

(Optional) tunnel name

dest_intf

(Optional) dest intfc

lm_tunnel_name_stats

(Optional) tunnel name

lsp_name

(Optional) lsp name

sprint_tun_name

(Optional) sprint tun name

tsp_dest_ipaddr

(Optional) tsp dest ipaddr

vif_head_name_stats

(Optional) vif head name

sprint_tun_name_stats

(Optional) sprint tun name

tsp_dest_ipaddr_stats

(Optional) tsp dest ipaddr

tsp_cnt_num_tunnels

(Optional) tsp cnt num tunnels

tsp_cnt_idx_no_path

(Optional) tsp cnt idx no path

tsp_cnt_idx_inval_path

(Optional) tsp cnt idx inval path

tsp_cnt_idx_no_iep

(Optional) tsp cnt idx no iep

tsp_cnt_idx_pathchg

(Optional) tsp cnt idx pathchg

tsp_cnt_idx_loose_reopt

(Optional) tsp cnt idx loose reopt

tsp_cnt_idx_statechg

(Optional) tsp cnt idx statechg

tsp_cnt_idx_tun_down

(Optional) tsp cnt idx tun down

tsp_cnt_idx_oper_down

(Optional) tsp cnt idx oper down

tsp_cnt_idx_sig_ok

(Optional) tsp cnt idx sig ok

tsp_cnt_idx_sig_timeout

(Optional) tsp cnt idx sig timeout

tsp_cnt_idx_bad_path

(Optional) tsp cnt idx bad path

tsp_cnt_idx_sig_abort

(Optional) tsp cnt idx sig abort

tsp_cnt_idx_nobw

(Optional) tsp cnt idx nobw

tsp_cnt_idx_noroute

(Optional) tsp cnt idx noroute

tsp_cnt_idx_admin

(Optional) tsp cnt idx admin

tsp_cnt_idx_bad

(Optional) tsp cnt idx bad

tsp_cnt_idx_rro_loop

(Optional) tsp cnt idx rro loop

tsp_cnt_idx_frr_active

(Optional) tsp cnt idx frr active

tsp_cnt_idx_other

(Optional) tsp cnt idx other

TABLE_rrr_db

(Optional) rrr_db info

tsp_rrr_db_type

(Optional) tsp rrr db type

tsp_rrr_db_in_use

(Optional) tsp rrr db in use

tsp_rrr_db_allocated

(Optional) tsp rrr db allocated

tsp_rrr_db_freed

(Optional) tsp rrr db freed

he_mgr_tbl_id

(Optional) he mgr tbl id

lm_mgr_tbl_id

(Optional) lm mgr tbl id

time_passed

(Optional) time passed

output_rate

(Optional) output rate

packet_rate

(Optional) packet rate

normalized

(Optional) normalized

TABLE_tunnels_protect

(Optional) tunnels protection

prot_tunnel_role

(Optional) tunnel role

prot_name

(Optional) protect name

prot_head_name

(Optional) head name

prot_gen_status

(Optional) gen status

prot_conn_status

(Optional) conn status

prot_tsp_src_ipaddr

(Optional) tsp src ipaddr

prot_tsp_dst_ipaddr

(Optional) tsp dst ipaddr

prot_tsp_tun_instances

(Optional) tsp tun instances

unprotected

(Optional) unprotected

out_orig_name

(Optional) out orig name

out_tun_tag_label

(Optional) out tun tag label

out_lsp_orig_phop

(Optional) out lsp orig phop

out_frr_orig_nnhop

(Optional) out frr orig nnhop

out_frr_orig_nnhop_rtr

(Optional) out frr orig nnhop rtr

TABLE_frr_backup_db

(Optional) frr_backup_db info

bu_protected_intfcs

(Optional) protected intfcs

bu_num_lsps

(Optional) num lsps

bu_num_active_lsps

(Optional) num active lsps

bu_bw_any_unlimited_inuse

(Optional) bu bw any unlimited inuse

bu_bw_any_limit

(Optional) bu bw any limit

bu_bw_any_limited_inuse

(Optional) bu bw any limited inuse

bu_bw_any_limited_bwp_inuse

(Optional) bu bw any limited bwp inuse

bu_bw_global_limit

(Optional) bu bw global limit

bu_bw_global_limited_inuse

(Optional) bu bw global limited inuse

bu_bw_global_limited_bwp_inuse

(Optional) bu bw global limited bwp inuse

bu_bw_sub_limit

(Optional) bu bw sub limit

bu_bw_sub_limited_inuse

(Optional) bu bw sub limited inuse

bu_bw_sub_limited_bwp_inuse

(Optional) bu bw sub limited bwp inuse

backup_none

(Optional) backup none

frr_protection_none

(Optional) frr protection none

no_rsvp_info

(Optional) no rsvp info

in_frr_is_active

(Optional) in frr is active

in_orig_intfc

(Optional) in orig intfc

in_tun_tag_label

(Optional) in tun tag label

in_frr_orig_phop

(Optional) in frr orig phop

in_intfc_with_frr

(Optional) in intfc with frr

in_frr_phop

(Optional) in frr phop

nhop_is_tail

(Optional) nhop is tail

no_frr_nnhop_info

(Optional) no frr nnhop info

frr_active_or_ready

(Optional) frr active or ready

frr_backup_lsp_intfc

(Optional) frr backup lsp intfc

frr_nnhop_or_nhop

(Optional) frr nnhop or nhop

frr_out_backup_intfc

(Optional) frr out backup intfc

lsp_out_intfc

(Optional) lsp out intfc

frr_backup_lsp_out_label

(Optional) frr backup lsp out label

frr_orig_out_intfc

(Optional) frr orig out intfc

frr_orig_out_label

(Optional) frr orig out label

frr_orig_out_nhop

(Optional) frr orig out nhop

frr_backup_nnhop

(Optional) frr backup nnhop

frr_backup_nnhop_rtr

(Optional) frr backup nnhop rtr

frr_backup_intfc

(Optional) frr backup intfc

frr_backup_label

(Optional) frr backup label

frr_protected_bw

(Optional) frr protected bw

frr_protect_level

(Optional) frr protect level

frr_bw_type

(Optional) frr bw type

TABLE_prot_protection

(Optional) protection path info

protection_path_status

(Optional) protection path status

protection_common_links

(Optional) protection common links

protection_common_nodes

(Optional) protection common nodes

protection_p2p_links

(Optional) protection p2p links

protection_multiaccess_links

(Optional) protection multiaccess links

protection_both_interfaces

(Optional) protection both interfaces

protection_one_interface

(Optional) protection one interface

protection_zero_interfaces

(Optional) protection zero interfaces

TABLE_primary_protection

(Optional) primary path

protection_primary_path

(Optional) protection primary path

TABLE_protect_protection

(Optional) primary path

protection_protect_path

(Optional) protection protect path

protection_type

(Optional) parameter type

protection_autobw_req

(Optional) autobw req

protection_bw_kbps

(Optional) bw kbps

protection_setup_pri

(Optional) setup priority

protection_hold_pri

(Optional) hold priority

protection_affinity_value

(Optional) affinity value

protection_affinity_mask

(Optional) affinity mask

protection_metric_type

(Optional) metric type

protection_in_name

(Optional) input interface name

protection_in_label

(Optional) input label

protection_out_name

(Optional) output interface name

protection_out_label

(Optional) output label

protection_backup_name

(Optional) backup interface name

protection_backup_label

(Optional) backup label

protection_frr_active

(Optional) FRR active/in use

protection_rsvp_lsp_source_addr

(Optional) rsvp lsp source addr

protection_rsvp_lsp_dest_addr

(Optional) rsvp lsp dest addr

protection_rsvp_lsp_dest_port

(Optional) rsvp lsp dest port

protection_rsvp_lsp_source_port

(Optional) rsvp lsp source port

protection_rsvp_lsp_local_addr

(Optional) rsvp lsp local addr

TABLE_ero_in_protection

(Optional) ero info

in_protection_rsvp_ero_addr

(Optional) rsvp ero addr

in_protection_rsvp_ero_loose

(Optional) rsvp ero loose

in_protection_rsvp_ero_routerid

(Optional) rsvp ero routerid

in_protection_rsvp_ero_if_id

(Optional) rsvp ero if id

TABLE_ero_out_protection

(Optional) ero info

out_protection_rsvp_ero_addr

(Optional) rsvp ero addr

out_protection_rsvp_ero_loose

(Optional) rsvp ero loose

out_protection_rsvp_ero_routerid

(Optional) rsvp ero routerid

out_protection_rsvp_ero_if_id

(Optional) rsvp ero if id

TABLE_rro_protection

(Optional) rro info

protection_rsvp_rro_protect_avail

(Optional) rsvp rro protection available

protection_rsvp_rro_protect_in_use

(Optional) rsvp rro protection in use

protection_rsvp_rro_bw_protected

(Optional) rsvp rro bw protected

protection_rsvp_rro_node_protect_avail

(Optional) rsvp rro node protection available

protection_rsvp_rro_is_node_id

(Optional) rsvp rro is node id

protection_rsvp_rro_addr

(Optional) rsvp rro addr

protection_rsvp_rro_if_addr

(Optional) rsvp rro if addr

protection_rsvp_rro_if_id

(Optional) rsvp rro if id

protection_rsvp_rro_label

(Optional) rsvp rro label

protection_rsvp_tspec_rate

(Optional) rsvp tspec rate

protection_rsvp_tspec_burst

(Optional) rsvp tspec burst

protection_rsvp_tspec_peak

(Optional) rsvp tspec peak

TABLE_rro_resv_protection

(Optional) rro info

resv_protection_rsvp_rro_protect_avail

(Optional) rsvp rro protection available

resv_protection_rsvp_rro_protect_in_use

(Optional) rsvp rro protection in use

resv_protection_rsvp_rro_bw_protected

(Optional) rsvp rro bw protected

resv_protection_rsvp_rro_node_protect_avail

(Optional) rsvp rro node protection available

resv_protection_rsvp_rro_is_node_id

(Optional) rsvp rro is node id

resv_protection_rsvp_rro_addr

(Optional) rsvp rro addr

resv_protection_rsvp_rro_if_addr

(Optional) rsvp rro if addr

resv_protection_rsvp_rro_if_id

(Optional) rsvp rro if id

resv_protection_rsvp_rro_label

(Optional) rsvp rro label

protection_rsvp_fspec_rate

(Optional) rsvp rspec rate

protection_rsvp_fspec_burst

(Optional) rsvp rspec burst

protection_rsvp_fspec_peak

(Optional) rsvp rspec peak

TABLE_members

(Optional) members info

member_name

(Optional) tunnel name

TABLE_member_exp

(Optional) member exp info

member_exp_bits

(Optional) exp bits

member_default_exp_bit

(Optional) default exp bit

current_reopt_in_progress

(Optional) reopt in progress

current_delayed_clean

(Optional) delayed clean

current_popt_protect

(Optional) popt protect

current_popt_idx_str

(Optional) popt idx str

current_popt_lockdown

(Optional) popt lockdown

current_popt_type_str

(Optional) popt type str

current_popt_verbatim

(Optional) popt verbatim

current_popt_path_id

(Optional) popt path id

current_popt_accum_admin_weight

(Optional) popt accum admin weight

current_popt_out_interface_name

(Optional) out interface name

current_popt_label_str

(Optional) popt label str

current_popt_int_prop

(Optional) popt int prop

current_popt_label_raw_value

(Optional) popt label raw value

current_fwd_adj_hold_up_ms_remaining

(Optional) fwd adj hold up ms remaining

current_reroute_pending

(Optional) reroute pending

current_type

(Optional) parameter type

current_autobw_req

(Optional) autobw req

current_bw_kbps

(Optional) bw kbps

current_setup_pri

(Optional) setup priority

current_hold_pri

(Optional) hold priority

current_affinity_value

(Optional) affinity value

current_affinity_mask

(Optional) affinity mask

current_metric_type

(Optional) metric type

TABLE_prot_current

(Optional) protection path info

current_path_status

(Optional) protection path status

current_common_links

(Optional) protection common links

current_common_nodes

(Optional) protection common nodes

current_p2p_links

(Optional) protection p2p links

current_multiaccess_links

(Optional) protection multiaccess links

current_both_interfaces

(Optional) protection both interfaces

current_one_interface

(Optional) protection one interface

current_zero_interfaces

(Optional) protection zero interfaces

TABLE_primary_current

(Optional) primary path

current_primary_path

(Optional) protection primary path

TABLE_protect_current

(Optional) primary path

current_protect_path

(Optional) protection protect path

current_type

(Optional) parameter type

current_autobw_req

(Optional) autobw req

current_bw_kbps

(Optional) bw kbps

current_setup_pri

(Optional) setup priority

current_hold_pri

(Optional) hold priority

current_affinity_value

(Optional) affinity value

current_affinity_mask

(Optional) affinity mask

current_metric_type

(Optional) metric type

current_in_name

(Optional) input interface name

current_in_label

(Optional) input label

current_out_name

(Optional) output interface name

current_out_label

(Optional) output label

current_backup_name

(Optional) backup interface name

current_backup_label

(Optional) backup label

current_frr_active

(Optional) FRR active/in use

current_rsvp_lsp_source_addr

(Optional) rsvp lsp source addr

current_rsvp_lsp_dest_addr

(Optional) rsvp lsp dest addr

current_rsvp_lsp_dest_port

(Optional) rsvp lsp dest port

current_rsvp_lsp_source_port

(Optional) rsvp lsp source port

current_rsvp_lsp_local_addr

(Optional) rsvp lsp local addr

TABLE_ero_in_current

(Optional) ero info

in_current_rsvp_ero_addr

(Optional) rsvp ero addr

in_current_rsvp_ero_loose

(Optional) rsvp ero loose

in_current_rsvp_ero_routerid

(Optional) rsvp ero routerid

in_current_rsvp_ero_if_id

(Optional) rsvp ero if id

TABLE_ero_out_current

(Optional) ero info

out_current_rsvp_ero_addr

(Optional) rsvp ero addr

out_current_rsvp_ero_loose

(Optional) rsvp ero loose

out_current_rsvp_ero_routerid

(Optional) rsvp ero routerid

out_current_rsvp_ero_if_id

(Optional) rsvp ero if id

TABLE_rro_current

(Optional) rro info

current_rsvp_rro_protect_avail

(Optional) rsvp rro protection available

current_rsvp_rro_protect_in_use

(Optional) rsvp rro protection in use

current_rsvp_rro_bw_protected

(Optional) rsvp rro bw protected

current_rsvp_rro_node_protect_avail

(Optional) rsvp rro node protection available

current_rsvp_rro_is_node_id

(Optional) rsvp rro is node id

current_rsvp_rro_addr

(Optional) rsvp rro addr

current_rsvp_rro_if_addr

(Optional) rsvp rro if addr

current_rsvp_rro_if_id

(Optional) rsvp rro if id

current_rsvp_rro_label

(Optional) rsvp rro label

current_rsvp_tspec_rate

(Optional) rsvp tspec rate

current_rsvp_tspec_burst

(Optional) rsvp tspec burst

current_rsvp_tspec_peak

(Optional) rsvp tspec peak

TABLE_rro_resv_current

(Optional) rro info

resv_current_rsvp_rro_protect_avail

(Optional) rsvp rro protection available

resv_current_rsvp_rro_protect_in_use

(Optional) rsvp rro protection in use

resv_current_rsvp_rro_bw_protected

(Optional) rsvp rro bw protected

resv_current_rsvp_rro_node_protect_avail

(Optional) rsvp rro node protection available

resv_current_rsvp_rro_is_node_id

(Optional) rsvp rro is node id

resv_current_rsvp_rro_addr

(Optional) rsvp rro addr

resv_current_rsvp_rro_if_addr

(Optional) rsvp rro if addr

resv_current_rsvp_rro_if_id

(Optional) rsvp rro if id

resv_current_rsvp_rro_label

(Optional) rsvp rro label

current_rsvp_fspec_rate

(Optional) rsvp rspec rate

current_rsvp_fspec_burst

(Optional) rsvp rspec burst

current_rsvp_fspec_peak

(Optional) rsvp rspec peak

prot_current_popt_protect

(Optional) popt protect

prot_current_popt_idx_str

(Optional) popt idx str

prot_current_popt_lockdown

(Optional) popt lockdown

prot_current_popt_type_str

(Optional) popt type str

prot_current_popt_verbatim

(Optional) popt verbatim

prot_current_popt_path_id

(Optional) popt path id

prot_current_popt_accum_admin_weight

(Optional) popt accum admin weight

prot_current_popt_out_interface_name

(Optional) out interface name

prot_current_popt_label_str

(Optional) popt label str

prot_current_popt_int_prop

(Optional) popt int prop

prot_current_popt_label_raw_value

(Optional) popt label raw value

TABLE_popts

(Optional) path options table

popts_reopt_in_progress

(Optional) reopt in progress

popts_delayed_clean

(Optional) delayed clean

popts_popt_protect

(Optional) popt protect

popts_popt_idx_str

(Optional) popt idx str

popts_popt_lockdown

(Optional) popt lockdown

popts_popt_type_str

(Optional) popt type str

popts_popt_verbatim

(Optional) popt verbatim

popts_popt_path_id

(Optional) popt path id

popts_popt_accum_admin_weight

(Optional) popt accum admin weight

popts_popt_out_interface_name

(Optional) out interface name

popts_popt_label_str

(Optional) popt label str

popts_popt_int_prop

(Optional) popt int prop

popts_popt_label_raw_value

(Optional) popt label raw value

popts_fwd_adj_hold_up_ms_remaining

(Optional) fwd adj hold up ms remaining

popts_reroute_pending

(Optional) reroute pending

popts_type

(Optional) parameter type

popts_autobw_req

(Optional) autobw req

popts_bw_kbps

(Optional) bw kbps

popts_setup_pri

(Optional) setup priority

popts_hold_pri

(Optional) hold priority

popts_affinity_value

(Optional) affinity value

popts_affinity_mask

(Optional) affinity mask

popts_metric_type

(Optional) metric type

TABLE_prot_popts

(Optional) protection path info

popts_path_status

(Optional) protection path status

popts_common_links

(Optional) protection common links

popts_common_nodes

(Optional) protection common nodes

popts_p2p_links

(Optional) protection p2p links

popts_multiaccess_links

(Optional) protection multiaccess links

popts_both_interfaces

(Optional) protection both interfaces

popts_one_interface

(Optional) protection one interface

popts_zero_interfaces

(Optional) protection zero interfaces

TABLE_primary_popts

(Optional) primary path

popts_primary_path

(Optional) protection primary path

TABLE_protect_popts

(Optional) primary path

popts_protect_path

(Optional) protection protect path

popts_type

(Optional) parameter type

popts_autobw_req

(Optional) autobw req

popts_bw_kbps

(Optional) bw kbps

popts_setup_pri

(Optional) setup priority

popts_hold_pri

(Optional) hold priority

popts_affinity_value

(Optional) affinity value

popts_affinity_mask

(Optional) affinity mask

popts_metric_type

(Optional) metric type

popts_in_name

(Optional) input interface name

popts_in_label

(Optional) input label

popts_out_name

(Optional) output interface name

popts_out_label

(Optional) output label

popts_backup_name

(Optional) backup interface name

popts_backup_label

(Optional) backup label

popts_frr_active

(Optional) FRR active/in use

popts_rsvp_lsp_source_addr

(Optional) rsvp lsp source addr

popts_rsvp_lsp_dest_addr

(Optional) rsvp lsp dest addr

popts_rsvp_lsp_dest_port

(Optional) rsvp lsp dest port

popts_rsvp_lsp_source_port

(Optional) rsvp lsp source port

popts_rsvp_lsp_local_addr

(Optional) rsvp lsp local addr

TABLE_ero_in_popts

(Optional) ero info

in_popts_rsvp_ero_addr

(Optional) rsvp ero addr

in_popts_rsvp_ero_loose

(Optional) rsvp ero loose

in_popts_rsvp_ero_routerid

(Optional) rsvp ero routerid

in_popts_rsvp_ero_if_id

(Optional) rsvp ero if id

TABLE_ero_out_popts

(Optional) ero info

out_popts_rsvp_ero_addr

(Optional) rsvp ero addr

out_popts_rsvp_ero_loose

(Optional) rsvp ero loose

out_popts_rsvp_ero_routerid

(Optional) rsvp ero routerid

out_popts_rsvp_ero_if_id

(Optional) rsvp ero if id

TABLE_rro_popts

(Optional) rro info

popts_rsvp_rro_protect_avail

(Optional) rsvp rro protection available

popts_rsvp_rro_protect_in_use

(Optional) rsvp rro protection in use

popts_rsvp_rro_bw_protected

(Optional) rsvp rro bw protected

popts_rsvp_rro_node_protect_avail

(Optional) rsvp rro node protection available

popts_rsvp_rro_is_node_id

(Optional) rsvp rro is node id

popts_rsvp_rro_addr

(Optional) rsvp rro addr

popts_rsvp_rro_if_addr

(Optional) rsvp rro if addr

popts_rsvp_rro_if_id

(Optional) rsvp rro if id

popts_rsvp_rro_label

(Optional) rsvp rro label

popts_rsvp_tspec_rate

(Optional) rsvp tspec rate

popts_rsvp_tspec_burst

(Optional) rsvp tspec burst

popts_rsvp_tspec_peak

(Optional) rsvp tspec peak

TABLE_rro_resv_popts

(Optional) rro info

resv_popts_rsvp_rro_protect_avail

(Optional) rsvp rro protection available

resv_popts_rsvp_rro_protect_in_use

(Optional) rsvp rro protection in use

resv_popts_rsvp_rro_bw_protected

(Optional) rsvp rro bw protected

resv_popts_rsvp_rro_node_protect_avail

(Optional) rsvp rro node protection available

resv_popts_rsvp_rro_is_node_id

(Optional) rsvp rro is node id

resv_popts_rsvp_rro_addr

(Optional) rsvp rro addr

resv_popts_rsvp_rro_if_addr

(Optional) rsvp rro if addr

resv_popts_rsvp_rro_if_id

(Optional) rsvp rro if id

resv_popts_rsvp_rro_label

(Optional) rsvp rro label

popts_rsvp_fspec_rate

(Optional) rsvp rspec rate

popts_rsvp_fspec_burst

(Optional) rsvp rspec burst

popts_rsvp_fspec_peak

(Optional) rsvp rspec peak

prot_popts_popt_protect

(Optional) popt protect

prot_popts_popt_idx_str

(Optional) popt idx str

prot_popts_popt_lockdown

(Optional) popt lockdown

prot_popts_popt_type_str

(Optional) popt type str

prot_popts_popt_verbatim

(Optional) popt verbatim

prot_popts_popt_path_id

(Optional) popt path id

prot_popts_popt_accum_admin_weight

(Optional) popt accum admin weight

prot_popts_popt_out_interface_name

(Optional) out interface name

prot_popts_popt_label_str

(Optional) popt label str

prot_popts_popt_int_prop

(Optional) popt int prop

prot_popts_popt_label_raw_value

(Optional) popt label raw value

passive_dest_ipaddr

(Optional) passive tunnel destination ip address

passive_tunnnel_id

(Optional) passive tunnel id

passive_incomplete_properties

(Optional) passive tunnel incomplete properties

passive_dest_str

(Optional) passive destination string

config_type

(Optional) parameter type

config_autobw_req

(Optional) autobw req

config_bw_kbps

(Optional) bw kbps

config_setup_pri

(Optional) setup priority

config_hold_pri

(Optional) hold priority

config_affinity_value

(Optional) affinity value

config_affinity_mask

(Optional) affinity mask

config_metric_type

(Optional) metric type

tsp_flg_annc

(Optional) tsp flg annc

tsp_active_popt_enbl

(Optional) tsp active popt enbl

fa_holdtime

(Optional) fa holdtime

tsp_autobw_freq

(Optional) tsp autobw freq

tsp_autobw_time_left

(Optional) tsp autobw time left

tsp_autobw_time_max

(Optional) tsp autobw time max

tsp_autobw_collect

(Optional) tsp autobw collect

tsp_autobw_high_or_req

(Optional) tsp autobw high or req

tsp_autobw_samp_missed

(Optional) tsp autobw samp missed

tsp_autobw_samp_collected

(Optional) tsp autobw samp collected

auto_bw_disabled

(Optional) auto bw disabled

active_popt_type_str

(Optional) active popt type

active_popt_idx_str

(Optional) active popt index

active_popt_bw_override_enabled

(Optional) active popt bw override enabled

active_popt_lockdown_enabled

(Optional) active popt lockdown enabled

active_popt_verbatim_enabled

(Optional) active popt verbatim enabled

active_bw

(Optional) active bandwidth

active_bw_pool

(Optional) active bw pool

active_autobw

(Optional) active autobw bandwidth

active_autobw_pool

(Optional) active autobw pool

active_cfg_bw

(Optional) active configured bandwidth

active_cfg_bw_pool

(Optional) active configured bw pool

passive_sig_name

(Optional) passive signalled name

passive_sig_setup

(Optional) passive signalled setup

passive_sig_reserv

(Optional) passive signalled reserved

rsvp_current_in_name

(Optional) input interface name

rsvp_current_in_label

(Optional) input label

rsvp_current_out_name

(Optional) output interface name

rsvp_current_out_label

(Optional) output label

rsvp_current_backup_name

(Optional) backup interface name

rsvp_current_backup_label

(Optional) backup label

rsvp_current_frr_active

(Optional) FRR active/in use

rsvp_current_rsvp_lsp_source_addr

(Optional) rsvp lsp source addr

rsvp_current_rsvp_lsp_dest_addr

(Optional) rsvp lsp dest addr

rsvp_current_rsvp_lsp_dest_port

(Optional) rsvp lsp dest port

rsvp_current_rsvp_lsp_source_port

(Optional) rsvp lsp source port

rsvp_current_rsvp_lsp_local_addr

(Optional) rsvp lsp local addr

TABLE_ero_in_rsvp_current

(Optional) ero info

in_rsvp_current_rsvp_ero_addr

(Optional) rsvp ero addr

in_rsvp_current_rsvp_ero_loose

(Optional) rsvp ero loose

in_rsvp_current_rsvp_ero_routerid

(Optional) rsvp ero routerid

in_rsvp_current_rsvp_ero_if_id

(Optional) rsvp ero if id

TABLE_ero_out_rsvp_current

(Optional) ero info

out_rsvp_current_rsvp_ero_addr

(Optional) rsvp ero addr

out_rsvp_current_rsvp_ero_loose

(Optional) rsvp ero loose

out_rsvp_current_rsvp_ero_routerid

(Optional) rsvp ero routerid

out_rsvp_current_rsvp_ero_if_id

(Optional) rsvp ero if id

TABLE_rro_rsvp_current

(Optional) rro info

rsvp_current_rsvp_rro_protect_avail

(Optional) rsvp rro protection available

rsvp_current_rsvp_rro_protect_in_use

(Optional) rsvp rro protection in use

rsvp_current_rsvp_rro_bw_protected

(Optional) rsvp rro bw protected

rsvp_current_rsvp_rro_node_protect_avail

(Optional) rsvp rro node protection available

rsvp_current_rsvp_rro_is_node_id

(Optional) rsvp rro is node id

rsvp_current_rsvp_rro_addr

(Optional) rsvp rro addr

rsvp_current_rsvp_rro_if_addr

(Optional) rsvp rro if addr

rsvp_current_rsvp_rro_if_id

(Optional) rsvp rro if id

rsvp_current_rsvp_rro_label

(Optional) rsvp rro label

rsvp_current_rsvp_tspec_rate

(Optional) rsvp tspec rate

rsvp_current_rsvp_tspec_burst

(Optional) rsvp tspec burst

rsvp_current_rsvp_tspec_peak

(Optional) rsvp tspec peak

TABLE_rro_resv_rsvp_current

(Optional) rro info

resv_rsvp_current_rsvp_rro_protect_avail

(Optional) rsvp rro protection available

resv_rsvp_current_rsvp_rro_protect_in_use

(Optional) rsvp rro protection in use

resv_rsvp_current_rsvp_rro_bw_protected

(Optional) rsvp rro bw protected

resv_rsvp_current_rsvp_rro_node_protect_avail

(Optional) rsvp rro node protection available

resv_rsvp_current_rsvp_rro_is_node_id

(Optional) rsvp rro is node id

resv_rsvp_current_rsvp_rro_addr

(Optional) rsvp rro addr

resv_rsvp_current_rsvp_rro_if_addr

(Optional) rsvp rro if addr

resv_rsvp_current_rsvp_rro_if_id

(Optional) rsvp rro if id

resv_rsvp_current_rsvp_rro_label

(Optional) rsvp rro label

rsvp_current_rsvp_fspec_rate

(Optional) rsvp rspec rate

rsvp_current_rsvp_fspec_burst

(Optional) rsvp rspec burst

rsvp_current_rsvp_fspec_peak

(Optional) rsvp rspec peak

spf_path_info_str

(Optional) spf path info string

spfw_pathw_str

(Optional) spf path weight string

spfw_unknown_str

(Optional) spf weight unknown string

spfw_accum_admin_weigth

(Optional) spf accumulated admin weight

spfw_metric_type

(Optional) spf metric type

spf_exp_prefix

(Optional) spf exp prefix

spf_hop_unknown

(Optional) spf hop unknown

TABLE_spf_hoplist

(Optional) spf hoplist table

spf_hop_ipaddr

(Optional) spf hop IP address

spf_hop_intf

(Optional) spf hop interface

hist_create_time

(Optional) creation time

hist_path_change_time

(Optional) path change time

hist_tun_instances

(Optional) tunnel instances

hist_uptime

(Optional) uptime

hist_setup_time

(Optional) setup time

hist_selection

(Optional) path option selection

hist_perr_loc_current

(Optional) current LSP path error location

hist_perr_desc_current

(Optional) current LSP path error description

hist_uptime_reopt

(Optional) reopt LSP uptime

hist_setup_time_reopt

(Optional) reopt LSP setup time

hist_perr_loc_reopt

(Optional) reopt LSP path error location

hist_perr_desc_reopt

(Optional) reopt LSP path error description

hist_prev_popt_idx_str

(Optional) previous LSP popt index str

hist_prev_instance

(Optional) previous LSP instance

hist_prev_unknown

(Optional) previous LSP unknown

hist_setup_fail_reason

(Optional) setup fail reason

hist_perr_loc_prev

(Optional) previous LSP path error location

hist_perr_desc_prev

(Optional) previous LSP path error description

hist_other_po_idx

(Optional) other LSP popt index

hist_perr_loc_other

(Optional) other LSP path error location

hist_perr_desc_other

(Optional) other LSP path error description

heads_shown

(Optional) number of heads shown

mids_shown

(Optional) number of midpoints shown

tails_shown

(Optional) number of tails shown

Command Mode

- /exec

show mpls traffic-eng tunnels internal

show mpls traffic-eng tunnels { <tun-intf> | { { [ destination <address> ] [ source-id { <ipaddress> | <tunnel-id> | <ipaddress> <tunnel-id> } ] [ role { all | head | middle | tail | remote } ] [ { up | down } ] [ suboptimal constraints { none | current | max } ] [ property { backup-tunnel | fast-reroute } ] [ frrstate { ready | active } ] [ name <string> | name-regexp <regexp-string> ] [ interface { in <in-intf> | out <out-intf> | <phys-intf> | backup <bkup-intf> } ] [ attributes <attr-string> ] } + } } internal

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

tunnels

MPLS traffic-eng tunnel status

tun-intf

Tunnel interface

destination

(Optional) Restrict display to tunnels with this destination

address

(Optional) tunnel destination address

source-id

(Optional) Tunnel identifier address/id

ipaddress

(Optional) Source address part of tunnel identifier

tunnel-id

(Optional) Number part of tunnel identifier

role

(Optional) Restrict display to tunnels with specified role

all

(Optional) head, middle, or tail LSP tunnels

head

(Optional) tunnels that originate locally

middle

(Optional) tunnels that transit locally

tail

(Optional) tunnels that terminate locally

remote

(Optional) middle or tail tunnels

up

(Optional) Restrict display to tunnels in up state

down

(Optional) Restrict display to tunnels in down state

suboptimal

(Optional) Restrict display to tunnels using a suboptimal path

constraints

(Optional) Specify constraints for finding best comparison path

none

(Optional) path lookup without any constraints

current

(Optional) path lookup constrained by available resources

max

(Optional) path lookup constrained by network's maximum potential resources

property

(Optional) Restrict display to tunnels with specified property

backup-tunnel

(Optional) Tunnels used as fast reroute

fast-reroute

(Optional) Tunnels protected by fast reroute

frrstate

(Optional) Restrict display to tunnels with specific frr state

ready

(Optional) Tunnels in FRR ready state

active

(Optional) Tunnels in FRR active state

name

(Optional) Restrict display to tunnels with this name

string

(Optional) LSP Tunnel name

name-regexp

(Optional) Restrict display to tunnels matching this name

regexp-string

(Optional) LSP Tunnel name (regular expression)

interface

(Optional) Restrict display to tunnels using a specified interface

in

(Optional) input interface

in-intf

(Optional)

out

(Optional) output interface

out-intf

(Optional)

phys-intf

(Optional)

backup

(Optional) Fast reroute backup protection provided by tunnels

bkup-intf

(Optional)

attributes

(Optional) Restrict display to tunnels using a matching attribute list

attr-string

(Optional) LSP attribute list name (regular expression)

internal

Commands for internal use

Command Mode

- /exec

show mpls traffic-eng tunnels statistics internal

show mpls traffic-eng tunnels { <tun-intf> | { { [ destination <address> ] [ source-id { <ipaddress> | <tunnel-id> | <ipaddress> <tunnel-id> } ] [ role { all | head | middle | tail | remote } ] [ { up | down } ] [ suboptimal constraints { none | current | max } ] [ property { backup-tunnel | fast-reroute } ] [ frrstate { ready | active } ] [ name <string> | name-regexp <regexp-string> ] [ interface { in <in-intf> | out <out-intf> | <phys-intf> | backup <bkup-intf> } ] [ attributes <attr-string> ] } + } } statistics internal

Syntax Description

Syntax Description

show

Show running system information

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

tunnels

MPLS traffic-eng tunnel status

tun-intf

Tunnel interface

destination

(Optional) Restrict display to tunnels with this destination

address

(Optional) tunnel destination address

source-id

(Optional) Tunnel identifier address/id

ipaddress

(Optional) Source address part of tunnel identifier

tunnel-id

(Optional) Number part of tunnel identifier

role

(Optional) Restrict display to tunnels with specified role

all

(Optional) head, middle, or tail LSP tunnels

head

(Optional) tunnels that originate locally

middle

(Optional) tunnels that transit locally

tail

(Optional) tunnels that terminate locally

remote

(Optional) middle or tail tunnels

up

(Optional) Restrict display to tunnels in up state

down

(Optional) Restrict display to tunnels in down state

suboptimal

(Optional) Restrict display to tunnels using a suboptimal path

constraints

(Optional) Specify constraints for finding best comparison path

none

(Optional) path lookup without any constraints

current

(Optional) path lookup constrained by available resources

max

(Optional) path lookup constrained by network's maximum potential resources

property

(Optional) Restrict display to tunnels with specified property

backup-tunnel

(Optional) Tunnels used as fast reroute

fast-reroute

(Optional) Tunnels protected by fast reroute

frrstate

(Optional) Restrict display to tunnels with specific frr state

ready

(Optional) Tunnels in FRR ready state

active

(Optional) Tunnels in FRR active state

name

(Optional) Restrict display to tunnels with this name

string

(Optional) LSP Tunnel name

name-regexp

(Optional) Restrict display to tunnels matching this name

regexp-string

(Optional) LSP Tunnel name (regular expression)

interface

(Optional) Restrict display to tunnels using a specified interface

in

(Optional) input interface

in-intf

(Optional)

out

(Optional) output interface

out-intf

(Optional)

phys-intf

(Optional)

backup

(Optional) Fast reroute backup protection provided by tunnels

bkup-intf

(Optional)

attributes

(Optional) Restrict display to tunnels using a matching attribute list

attr-string

(Optional) LSP attribute list name (regular expression)

statistics

Tunnel counters and statistics

internal

Commands for internal use

Command Mode

- /exec

show mvpn bgp mdt

show mvpn bgp { mdt-safi | auto-discovery } [ mdt-source <src-addr> ] [ __readonly__ { TABLE_entry <bgp_rd> <mdt_src> <mdt_grp> <local> } ]

Syntax Description

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

bgp

Display BGP related information

mdt-safi

Display Auto-discovered BGP MDT-SAFI database

auto-discovery

Display Auto-discovered BGP MDT-SAFI database

mdt-source

(Optional) Source address of MVPN neighbor

src-addr

(Optional) Source Address

__readonly__

(Optional)

TABLE_entry

(Optional)

bgp_rd

(Optional)

mdt_src

(Optional)

mdt_grp

(Optional)

local

(Optional)

Command Mode

- /exec

show mvpn internal ha

show mvpn internal ha [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

internal

Commands for internal use

ha

PSS states

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show mvpn internal mrib

show mvpn internal { mrib-txlist | mrib-buffers }

Syntax Description

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

internal

Commands for internal use

mrib-txlist

Show MRIB transmission-list information

mrib-buffers

Show MRIB route buffer information

Command Mode

- /exec

show mvpn internal state

show mvpn internal state

Syntax Description

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

internal

Commands for internal use

state

Local state

Command Mode

- /exec

show mvpn mdt encap

show mvpn mdt encap [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_vrf <out_context> { TABLE_encap <encap_index> <mdt_grp> <mdt_src> <mdt_src_if> } ]

Syntax Description

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

mdt

Display MDT information

encap

Display MDT Encap table

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_vrf

(Optional)

out_context

(Optional)

TABLE_encap

(Optional)

encap_index

(Optional)

mdt_grp

(Optional)

mdt_src

(Optional)

mdt_src_if

(Optional)

Command Mode

- /exec

show mvpn mdt route

show mvpn mdt route [ detail ] [ __readonly__ TABLE_vrf <out_context> { TABLE_mroute <src_addr> <grp_addr> <ref_count> } ]

Syntax Description

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

mdt

Display MDT information

route

Display MDT route information

detail

(Optional) Display detailed information

__readonly__

(Optional)

TABLE_vrf

(Optional)

out_context

(Optional)

TABLE_mroute

(Optional)

src_addr

(Optional)

grp_addr

(Optional)

ref_count

(Optional)

Command Mode

- /exec

show mvpn snmp mib genericTable

show mvpn snmp mib genericTable [ <mplsVpnVrfName-in> ] [ __readonly__ TABLE_ciscoMvpnGenericTable <mplsVpnVrfName-out> <ciscoMvpnGenOperStatusChange> <ciscoMvpnGenOperChangeTime> <ciscoMvpnGenAssociatedInterfaces> <ciscoMvpnGenRowStatus> ]

Syntax Description

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

snmp

show snmp

mib

show mib tables

genericTable

Show MVPN Generic Table

mplsVpnVrfName-in

(Optional) mplsVpnVrfName

__readonly__

(Optional)

TABLE_ciscoMvpnGenericTable

(Optional)

mplsVpnVrfName-out

(Optional) mib table index mplsVpnVrfName

ciscoMvpnGenOperStatusChange

(Optional) mib object ciscoMvpnGenOperStatusChange

ciscoMvpnGenOperChangeTime

(Optional) mib object ciscoMvpnGenOperChangeTime

ciscoMvpnGenAssociatedInterfaces

(Optional) mib object ciscoMvpnGenAssociatedInterfaces

ciscoMvpnGenRowStatus

(Optional) mib object ciscoMvpnGenRowStatus

Command Mode

- /exec

show mvpn snmp mib mvpnBgpMdtUpdateTable

show mvpn snmp mib mvpnBgpMdtUpdateTable [ <ciscoMvpnBgpMdtUpdGrpAddrType-in> <ciscoMvpnBgpMdtUpdateGroup-in> <ciscoMvpnBgpMdtUpdSrcAddrType-in> <ciscoMvpnBgpMdtUpdateSource-in> ] [ __readonly__ TABLE_ciscoMvpnBgpMdtUpdateTable <ciscoMvpnBgpMdtUpdGrpAddrType-out> <ciscoMvpnBgpMdtUpdateGroup-out> <ciscoMvpnBgpMdtUpdateRd> <ciscoMvpnBgpMdtUpdSrcAddrType-out> <ciscoMvpnBgpMdtUpdateSource-out> <ciscoMvpnBgpMdtUpdOrigAddrType> <ciscoMvpnBgpMdtUpdateOriginator> <ciscoMvpnBgpMdtUpdNhAddrType> <ciscoMvpnBgpMdtUpdateNexthop> ]

Syntax Description

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

snmp

show snmp

mib

show mib tables

mvpnBgpMdtUpdateTable

show mib table mvpnBgpMdtUpdateTable

ciscoMvpnBgpMdtUpdGrpAddrType-in

(Optional) Data MDT Group Address Type

ciscoMvpnBgpMdtUpdateGroup-in

(Optional) Data MDT group address in the MDT join TLV

ciscoMvpnBgpMdtUpdSrcAddrType-in

(Optional) MDT mulitcast routing enty source address type

ciscoMvpnBgpMdtUpdateSource-in

(Optional) Souce addres for the MDT mulitcast routing enty created following the recepit of MDT join TLV

__readonly__

(Optional)

TABLE_ciscoMvpnBgpMdtUpdateTable

(Optional)

ciscoMvpnBgpMdtUpdGrpAddrType-out

(Optional) mib table index ciscoMvpnBgpMdtUpdGrpAddrType

ciscoMvpnBgpMdtUpdateGroup-out

(Optional) mib table index ciscoMvpnBgpMdtUpdateGroup

ciscoMvpnBgpMdtUpdateRd

(Optional) mib object ciscoMvpnBgpMdtUpdateRd

ciscoMvpnBgpMdtUpdSrcAddrType-out

(Optional) mib table index ciscoMvpnBgpMdtUpdSrcAddrType

ciscoMvpnBgpMdtUpdateSource-out

(Optional) mib table index ciscoMvpnBgpMdtUpdateSource

ciscoMvpnBgpMdtUpdOrigAddrType

(Optional) mib object ciscoMvpnBgpMdtUpdOrigAddrType

ciscoMvpnBgpMdtUpdateOriginator

(Optional) mib object ciscoMvpnBgpMdtUpdateOriginator

ciscoMvpnBgpMdtUpdNhAddrType

(Optional) mib object ciscoMvpnBgpMdtUpdNhAddrType

ciscoMvpnBgpMdtUpdateNexthop

(Optional) mib object ciscoMvpnBgpMdtUpdateNexthop

Command Mode

- /exec

show mvpn snmp mib mvpnMdtDataTable

show mvpn snmp mib mvpnMdtDataTable [ <mplsVpnVrfName-in> ] [ __readonly__ TABLE_ciscoMvpnMdtDataTable <mplsVpnVrfName-out> <ciscoMvpnMdtDataRangeAddrType> <ciscoMvpnMdtDataRangeAddress> <ciscoMvpnMdtDataWildcardType> <ciscoMvpnMdtDataWildcardBits> <ciscoMvpnMdtDataThreshold> <ciscoMvpnMdtDataRowStatus> ]

Syntax Description

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

snmp

show snmp

mib

show mib tables

mvpnMdtDataTable

show mib table mvpnMdtDataTable

mplsVpnVrfName-in

(Optional) VRF name

__readonly__

(Optional)

TABLE_ciscoMvpnMdtDataTable

(Optional)

mplsVpnVrfName-out

(Optional) mib table index mplsVpnVrfName

ciscoMvpnMdtDataRangeAddrType

(Optional) mib object ciscoMvpnMdtDefaultAddrType

ciscoMvpnMdtDataRangeAddress

(Optional) mib object ciscoMvpnMdtDataRangeAddress

ciscoMvpnMdtDataWildcardType

(Optional) mib object ciscoMvpnMdtDataWildcardType

ciscoMvpnMdtDataWildcardBits

(Optional) mib object ciscoMvpnMdtDataWildcardBits

ciscoMvpnMdtDataThreshold

(Optional) mib object ciscoMvpnMdtDataThreshold

ciscoMvpnMdtDataRowStatus

(Optional) mib object ciscoMvpnMdtDataRowStatus

Command Mode

- /exec

show mvpn snmp mib mvpnMdtDefaultTable

show mvpn snmp mib mvpnMdtDefaultTable [ <mplsVpnVrfName-in> ] [ __readonly__ TABLE_ciscoMvpnMdtDefaultTable <mplsVpnVrfName-out> <ciscoMvpnMdtDefaultAddrType> <ciscoMvpnMdtDefaultAddress> <ciscoMvpnMdtEncapsType> <ciscoMvpnMdtDefaultRowStatus> ]

Syntax Description

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

snmp

show snmp

mib

show mib tables

mvpnMdtDefaultTable

show mib table ciscoMvpnMdtDefaultTable

mplsVpnVrfName-in

(Optional) mplsVpnVrfName

__readonly__

(Optional)

TABLE_ciscoMvpnMdtDefaultTable

(Optional)

mplsVpnVrfName-out

(Optional) mib table index mplsVpnVrfName

ciscoMvpnMdtDefaultAddrType

(Optional) mib object ciscoMvpnMdtDefaultAddrType

ciscoMvpnMdtDefaultAddress

(Optional) mib object ciscoMvpnMdtDefaultAddress

ciscoMvpnMdtEncapsType

(Optional) mib object ciscoMvpnMdtEncapsType

ciscoMvpnMdtDefaultRowStatus

(Optional) mib object ciscoMvpnMdtDefaultRowStatus

Command Mode

- /exec

show mvpn snmp mib mvpnMdtJnRcvTable

show mvpn snmp mib mvpnMdtJnRcvTable [ <mplsVpnVrfName-in> <ciscoMvpnMdtJnRcvGrpAddrType-in> <ciscoMvpnMdtJnRcvGroup-in> <ciscoMvpnMdtJnRcvSrcAddrType-in> <ciscoMvpnMdtJnRcvSource-in> ] [ __readonly__ TABLE_ciscoMvpnMdtJnRcvTable <mplsVpnVrfName-out> <ciscoMvpnMdtJnRcvGrpAddrType-out> <ciscoMvpnMdtJnRcvGroup-out> <ciscoMvpnMdtJnRcvSrcAddrType-out> <ciscoMvpnMdtJnRcvSource-out> <ciscoMvpnMdtJnRcvUpTime> <ciscoMvpnMdtJnRcvExpTime> ]

Syntax Description

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

snmp

show snmp

mib

show mib tables

mvpnMdtJnRcvTable

show mib table ciscoMvpnMdtJnRcvTable

mplsVpnVrfName-in

(Optional) VRF name

ciscoMvpnMdtJnRcvGrpAddrType-in

(Optional) Data MDT group address type

ciscoMvpnMdtJnRcvGroup-in

(Optional) Data MDT group address in the MDT join TLV

ciscoMvpnMdtJnRcvSrcAddrType-in

(Optional) Source address type

ciscoMvpnMdtJnRcvSource-in

(Optional) Souce addres for the MDT mulitcast routing enty created following the recepit of MDT join TLV

__readonly__

(Optional)

TABLE_ciscoMvpnMdtJnRcvTable

(Optional)

mplsVpnVrfName-out

(Optional) mib table index mplsVpnVrfName

ciscoMvpnMdtJnRcvGrpAddrType-out

(Optional) mib table index ciscoMvpnMdtJnRcvGrpAddrType

ciscoMvpnMdtJnRcvGroup-out

(Optional) mib table index ciscoMvpnMdtJnRcvGroup

ciscoMvpnMdtJnRcvSrcAddrType-out

(Optional) mib table index ciscoMvpnMdtJnRcvSrcAddrType

ciscoMvpnMdtJnRcvSource-out

(Optional) mib table index ciscoMvpnMdtJnRcvSource

ciscoMvpnMdtJnRcvUpTime

(Optional) mib object ciscoMvpnMdtJnRcvUpTime

ciscoMvpnMdtJnRcvExpTime

(Optional) mib object ciscoMvpnMdtJnRcvExpTime

Command Mode

- /exec

show mvpn snmp mib mvpnMdtJnSendTable

show mvpn snmp mib mvpnMdtJnSendTable [ <mplsVpnVrfName-in> <ciscoMvpnMdtJnSendGrpAddrType-in> <ciscoMvpnMdtJnSendGroup-in> <ciscoMvpnMdtJnSendSrcAddrType-in> <ciscoMvpnMdtJnSendSource-in> ] [ __readonly__ TABLE_ciscoMvpnMdtJnSendTable <mplsVpnVrfName-out> <ciscoMvpnMdtJnSendGrpAddrType-out> <ciscoMvpnMdtJnSendGroup-out> <ciscoMvpnMdtJnSendSrcAddrType-out> <ciscoMvpnMdtJnSendSource-out> <ciscoMvpnMdtJnSendMdtGroup> <ciscoMvpnMdtJnSendMdtRefCt> ]

Syntax Description

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

snmp

show snmp

mib

show mib tables

mvpnMdtJnSendTable

show mib table ciscoMvpnMdtJnSendTable

mplsVpnVrfName-in

(Optional) VRF name

ciscoMvpnMdtJnSendGrpAddrType-in

(Optional) Data MDT group address type

ciscoMvpnMdtJnSendGroup-in

(Optional) Data MDT group address in the MDT join TLV

ciscoMvpnMdtJnSendSrcAddrType-in

(Optional) Source address type

ciscoMvpnMdtJnSendSource-in

(Optional) Souce addres for the MDT mulitcast routing enty created following the recepit of MDT join TLV

__readonly__

(Optional)

TABLE_ciscoMvpnMdtJnSendTable

(Optional)

mplsVpnVrfName-out

(Optional) mib table index mplsVpnVrfName

ciscoMvpnMdtJnSendGrpAddrType-out

(Optional) mib table index ciscoMvpnMdtJnSendGrpAddrType

ciscoMvpnMdtJnSendGroup-out

(Optional) mib table index ciscoMvpnMdtJnSendGroup

ciscoMvpnMdtJnSendSrcAddrType-out

(Optional) mib table index ciscoMvpnMdtJnSendSrcAddrType

ciscoMvpnMdtJnSendSource-out

(Optional) mib table index ciscoMvpnMdtJnSendSource

ciscoMvpnMdtJnSendMdtGroup

(Optional) mib object ciscoMvpnMdtJnSendMdtGroup

ciscoMvpnMdtJnSendMdtRefCt

(Optional) mib object ciscoMvpnMdtJnSendMdtRefCt

Command Mode

- /exec

show mvpn snmp mib mvpnMrouteMdtTable

show mvpn snmp mib mvpnMrouteMdtTable [ <mplsVpnVrfName-in> <ciscoMvpnMrouteMvrfGrpAddrType-in> <ciscoMvpnMrouteMvrfGroup-in> <ciscoMvpnMrouteMvrfSrcAddrType-in> <ciscoMvpnMrouteMvrfSource-in> <ciscoMvpnMrouteUpDownStreamInfo-in> ] [ __readonly__ TABLE_ciscoMvpnMrouteMdtTable <mplsVpnVrfName-out> <ciscoMvpnMrouteMvrfGrpAddrType-out> <ciscoMvpnMrouteMvrfGroup-out> <ciscoMvpnMrouteMvrfSrcAddrType-out> <ciscoMvpnMrouteMvrfSource-out> <ciscoMvpnMrouteUpDownStreamInfo-out> <ciscoMvpnMrouteMdtGrpAddrType> <ciscoMvpnMrouteMdtGroup> <ciscoMvpnMrouteMdtType> ]

Syntax Description

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

snmp

show snmp

mib

show mib tables

mvpnMrouteMdtTable

show mib table mvpnMrouteMdtTable

mplsVpnVrfName-in

(Optional) VRF name

ciscoMvpnMrouteMvrfGrpAddrType-in

(Optional) Group address type of multicast routing entry

ciscoMvpnMrouteMvrfGroup-in

(Optional) Group address of multicast routing entry

ciscoMvpnMrouteMvrfSrcAddrType-in

(Optional) Source address type

ciscoMvpnMrouteMvrfSource-in

(Optional) Source address of multicast routing entry

ciscoMvpnMrouteUpDownStreamInfo-in

(Optional) if PE is Upstream or downstream router for the multcast routing entry

__readonly__

(Optional)

TABLE_ciscoMvpnMrouteMdtTable

(Optional)

mplsVpnVrfName-out

(Optional) mib table index mplsVpnVrfName

ciscoMvpnMrouteMvrfGrpAddrType-out

(Optional) mib table index ciscoMvpnMrouteMvrfGrpAddrType

ciscoMvpnMrouteMvrfGroup-out

(Optional) mib table index ciscoMvpnMrouteMvrfGroup

ciscoMvpnMrouteMvrfSrcAddrType-out

(Optional) mib table index ciscoMvpnMrouteMvrfSrcAddrType

ciscoMvpnMrouteMvrfSource-out

(Optional) mib table index ciscoMvpnMrouteMvrfSource

ciscoMvpnMrouteUpDownStreamInfo-out

(Optional) mib table index ciscoMvpnMrouteUpDownStreamInfo

ciscoMvpnMrouteMdtGrpAddrType

(Optional) mib object ciscoMvpnMrouteMdtGrpAddrType

ciscoMvpnMrouteMdtGroup

(Optional) mib object ciscoMvpnMrouteMdtGroup

ciscoMvpnMrouteMdtType

(Optional) mib object ciscoMvpnMrouteMdtType

Command Mode

- /exec

show mvpn snmp mib mvpnMvrfNumber

show mvpn snmp mib mvpnMvrfNumber [ __readonly__ <ciscoMvpnMvrfNumber> ]

Syntax Description

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

snmp

show snmp

mib

show mib tables/scalars

mvpnMvrfNumber

Show number of MVRFs

__readonly__

(Optional) Read Only

ciscoMvpnMvrfNumber

(Optional) mib object ciscoMvpnMvrfNumber

Command Mode

- /exec

show mvpn snmp mib mvpnNotificationEnable

show mvpn snmp mib mvpnNotificationEnable [ __readonly__ <ciscoMvpnNotificationEnable> ]

Syntax Description

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

snmp

show snmp

mib

show mib tables/scalars

mvpnNotificationEnable

Show value of ciscoMvpnNotificationEnable

__readonly__

(Optional) Read Only

ciscoMvpnNotificationEnable

(Optional) mib object ciscoMvpnNotificationEnable

Command Mode

- /exec

show mvpn snmp mib mvpnTunnelTable

show mvpn snmp mib mvpnTunnelTable [ <ifIndex-in> ] [ __readonly__ TABLE_ciscoMvpnTunnelTable <ifIndex-out> <ciscoMvpnTunnelName> <ciscoMvpnTunnelMvrf> ]

Syntax Description

Syntax Description

show

Show running system information

mvpn

Display Multicast VPN information

snmp

show snmp

mib

show mib tables

mvpnTunnelTable

show mib table mvpnTunnelTable

ifIndex-in

(Optional) Interface Index

__readonly__

(Optional)

TABLE_ciscoMvpnTunnelTable

(Optional)

ifIndex-out

(Optional) mib table index ifIndex

ciscoMvpnTunnelName

(Optional) mib object ciscoMvpnTunnelName

ciscoMvpnTunnelMvrf

(Optional) mib object ciscoMvpnTunnelMvrf

Command Mode

- /exec

Chapter 14. N Show Commands

- show nbm controller

- show nbm flows

- show nbm flows bandwidth

- show nbm flows statistics

- show nbproxy internal event-history cli

- show nbproxy internal event-history errors

- show nbproxy internal event-history events

- show nbproxy internal event-history intf

- show nbproxy internal event-history msgs

- show nbproxy internal event-history mts

- show nbproxy internal event-history packets

- show nbproxy internal event-history pss

- show nbproxy internal event-history vrf

- show nbproxy internal info

- show ngoam acl status

- show ngoam actsessions

- show ngoam interface statistics

- show ngoam loopback

- show ngoam pathtrace

- show ngoam probe

- show ngoam role

- show ngoam traceroute statistics

- show ntp access-groups

- show ntp authentication-keys

- show ntp authentication-status

- show ntp information

- show ntp internal event-history config

- show ntp internal event-history fsm

- show ntp internal event-history msgs

- show ntp internal event-history rts

- show ntp internal event-history tstamp

- show ntp internal log-buffer

- show ntp internal mem-stats

- show ntp internal mem-stats detail

- show ntp internal module-info

- show ntp logging-status

- show ntp peer-status

- show ntp peers

- show ntp rts-update

- show ntp session status

- show ntp source-interface

- show ntp source

- show ntp statistics

- show ntp status

- show ntp trusted-keys

- show nve bfd neighbors

- show nve core-links

- show nve ethernet-segment

- show nve interface

- show nve internal bfd neighbors interface

- show nve internal bgp rnh database

- show nve internal es-history

- show nve internal event-history cli

- show nve internal event-history errors

- show nve internal event-history events

- show nve internal event-history msgs

- show nve internal event-history mts

- show nve internal event-history packets

- show nve internal event-history platform errors

- show nve internal event-history platform traces

- show nve internal event-history platform triggers

- show nve internal event-history pss

- show nve internal event-history triggers

- show nve internal event-history xos-events

- show nve internal export bgp rnh

- show nve internal export controller peers

- show nve internal export es

- show nve internal export es

- show nve internal export global

- show nve internal export nve

- show nve internal export peer-vni

- show nve internal export peer

- show nve internal export redundancy-group

- show nve internal export vni

- show nve internal libinfo

- show nve internal mem-stats

- show nve internal mrib-history

- show nve internal multicast-group

- show nve internal peer-history

- show nve internal peer-notify-history

- show nve internal peers history-log

- show nve internal pim-cache

- show nve internal platform globals

- show nve internal platform interface

- show nve internal platform statistics

- show nve internal platform txn_buf

- show nve internal port-history

- show nve internal pss ethernet-segment

- show nve internal pss redundancy-group

- show nve internal pss replication-servers

- show nve internal snmp cnvoNvoPerPeerStatsTable nve paddr_type paddr

- show nve internal snmp cnvoNvoTable nve

- show nve internal snmp cnvoPeerTable nve paddr_type paddr

- show nve internal snmp cnvoVNetStatsTable nve vni

- show nve internal snmp cnvoVNetTable nve vni

- show nve internal snmp global cnvoUdpDestinationPort

- show nve internal source-group

- show nve internal state

- show nve internal statistics

- show nve internal txlist source

- show nve internal vlan-cache

- show nve internal vlan-cc

- show nve internal vni-history

- show nve internal vni

- show nve peers

- show nve peers interface counters

- show nve peers vni interface counters

- show nve replication-servers

- show nve vni

- show nve vni counters

- show nve vni ingress-replication

- show nve vni peer-vtep

- show nve vrf

- show nve vxlan-params

- show nxapi-server logs

- show nxapi

- show nxapi internal buffer

- show nxsdk internal debug

- show nxsdk internal event-history

- show nxsdk internal mem-stats

- show nxsdk internal pss

- show nxsdk internal service

show nbm controller

show nbm controller

Syntax Description

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

controller

Controller mode information

Command Mode

- /exec

show nbm flows

show nbm flows [ all | group-based | m-group <group-ip-id> | [ source <source-ip> [ group <group-ip> ] | group <group-ip> [ source <source-ip> ] ] [ active | inactive | no-receiver | detail ] ] [ interface <if-name> ]

Syntax Description

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

flows

NBM flows

active

(Optional) Active flows

inactive

(Optional) Inactive flows

no-receiver

(Optional) Flows without any receiver

all

(Optional) Both active and deleted flows

group-based

(Optional) Multicast group based (*,G) flows to IGMP receivers

m-group

(Optional) Multicast group

group-ip-id

(Optional) Multicast group address

source

(Optional) Source ip of sender

source-ip

(Optional) Sender ip address

group

(Optional) Multicast group

group-ip

(Optional) Multicast group address

interface

(Optional) Ingress port

detail

(Optional) Detailed output

if-name

(Optional) Interface name

Command Mode

- /exec

show nbm flows bandwidth

show nbm flows bandwidth

Syntax Description

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

flows

NBM flows

bandwidth

Per Flow Bandwidth in Mbps

Command Mode

- /exec

show nbm flows statistics

show nbm flows statistics [ group-based | m-group <group-ip-id> ] [ interface <if-name> ]

Syntax Description

Syntax Description

show

Show running system information

nbm

Non Blocking Multicast

flows

NBM flows

statistics

Flow statistics

group-based

(Optional) Multicast group based (*,G) flows to IGMP receivers

m-group

(Optional) Multicast group

group-ip-id

(Optional) Multicast group address

interface

(Optional) Ingress port

if-name

(Optional) Interface name

Command Mode

- /exec

show nbproxy internal event-history cli

show nbproxy internal event-history cli

Syntax Description

Syntax Description

show

Show running system information

nbproxy

Display NBPROXY information

internal

NBPROXY Internal State

event-history

Show various event logs of NBPROXY

cli

CLI event debugging

Command Mode

- /exec

show nbproxy internal event-history errors

show nbproxy internal event-history errors

Syntax Description

Syntax Description

show

Show running system information

nbproxy

Display NBPROXY information

internal

NBPROXY Internal State

event-history

Show various event logs of NBPROXY

errors

Error messages

Command Mode

- /exec

show nbproxy internal event-history events

show nbproxy internal event-history events

Syntax Description

Syntax Description

show

Show running system information

nbproxy

Display NBPROXY information

internal

NBPROXY Internal State

event-history

Show various event logs of NBPROXY

events

Trace Event debugs

Command Mode

- /exec

show nbproxy internal event-history intf

show nbproxy internal event-history intf

Syntax Description

Syntax Description

show

Show running system information

nbproxy

Display NBPROXY information

internal

NBPROXY Internal State

event-history

Show various event logs of NBPROXY

intf

Interface debugs

Command Mode

- /exec

show nbproxy internal event-history msgs

show nbproxy internal event-history msgs

Syntax Description

Syntax Description

show

Show running system information

nbproxy

Display NBPROXY information

internal

NBPROXY Internal State

event-history

Show various event logs of NBPROXY

msgs

Messages debugging

Command Mode

- /exec

show nbproxy internal event-history mts

show nbproxy internal event-history mts

Syntax Description

Syntax Description

show

Show running system information

nbproxy

Display NBPROXY information

internal

NBPROXY Internal State

event-history

Show various event logs of NBPROXY

mts

MTS debugs

Command Mode

- /exec

show nbproxy internal event-history packets

show nbproxy internal event-history packets

Syntax Description

Syntax Description

show

Show running system information

nbproxy

Display NBPROXY information

internal

NBPROXY Internal State

event-history

Show various event logs of NBPROXY

packets

Packets

Command Mode

- /exec

show nbproxy internal event-history pss

show nbproxy internal event-history pss

Syntax Description

Syntax Description

show

Show running system information

nbproxy

Display NBPROXY information

internal

NBPROXY Internal State

event-history

Show various event logs of NBPROXY

pss

PSS debugs

Command Mode

- /exec

show nbproxy internal event-history vrf

show nbproxy internal event-history vrf

Syntax Description

Syntax Description

show

Show running system information

nbproxy

Display NBPROXY information

internal

NBPROXY Internal State

event-history

Show various event logs of NBPROXY

vrf

VRF debugs

Command Mode

- /exec

show nbproxy internal info

show nbproxy internal info

Syntax Description

Syntax Description

show

Show running system information

nbproxy

Display NBPROXY information

internal

NBPROXY Internal State

info

NBPROXY info

Command Mode

- /exec

show ngoam acl status

show ngoam acl status [ __readonly__ [ LIST_bds { <bd-id> } ] <end-row> <top-line> ]

Syntax Description

Syntax Description

show

Show running system information

ngoam

ngoam

acl

Show acl info

status

Show acl install status

__readonly__

(Optional) Read Only

LIST_bds

(Optional) List of all bds acls is installed on

bd-id

(Optional) Bridge-Domain identifier

end-row

(Optional) Carriage return

top-line

(Optional) Placeholder for printing the headline

Command Mode

- /exec

show ngoam actsessions

show ngoam actsessions

Syntax Description

Syntax Description

show

Show running system information

ngoam

ngoam information

actsessions

show

Command Mode

- /exec

show ngoam interface statistics

show ngoam interface statistics [ __readonly__ [ TABLE_stats { <interface-name> <tx> <rx> } <statistics-end> ] ]

Syntax Description

Syntax Description

TABLE_stats

(Optional) interface statistics table

interface-name

(Optional) interface namestring

tx

(Optional) ngoam probe transmit on the interface

rx

(Optional) ngoam probe receive on the interface

show

Show running system information

ngoam

ngoam

interface

probe packet interface

statistics

ngoam probe interface statistics

__readonly__

(Optional) Read Only

statistics-end

(Optional) statistics table end marker

Command Mode

- /exec

show ngoam loopback

show ngoam loopback { { statistics { session { <handle> | all } | summary } } | { status { session { <handle> | all } } } } [ __readonly__ [ TABLE_statistics { <sender-handle> <last-clear-stats> { <stat-attr> <stat-value> } + } + ] [ TABLE_status { <st-sender-handle> <type> <state> } + ] [ TABLE_statistics_summary { <last-clear-summary-stats> <tx> <rx> <timeout> <unsent> <resp-tx> <resp-rx> <resp-unsent> <resp-dup> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ngoam

ngoam

loopback

ngoam loopback

statistics

ngoam loopback statistics

summary

ngoam loopback statistics summary

status

ngoam loopback status

session

ngoam loopback session

session

ngoam loopback session

handle

ngoam loopback session handle

handle

ngoam loopback session handle

all

Display results for all ping/loopback sessions

all

Display results for all ping/loopback sessions

TABLE_statistics

(Optional) statistics table

sender-handle

(Optional) sender handle

last-clear-stats

(Optional) last clear time for statistics

stat-attr

(Optional) stats type

stat-value

(Optional) stats value

TABLE_statistics_summary

(Optional) statistics summary table

last-clear-summary-stats

(Optional) last clear time for summary statistics

tx

(Optional) summary request sent

rx

(Optional) summary reply received

timeout

(Optional) summary timeout

unsent

(Optional) summary unsent

resp-tx

(Optional) summary resp tx

resp-rx

(Optional) summary resp rx

resp-unsent

(Optional) summary resp unsent

resp-dup

(Optional) Duplicate responses received

TABLE_status

(Optional) database status table

st-sender-handle

(Optional) sender handle

type

(Optional) ngoam ping type

state

(Optional) ngoam ping state

__readonly__

(Optional) Read Only

Command Mode

- /exec

show ngoam pathtrace

show ngoam pathtrace { { statistics { summary | { session { <handle> | all } } } } | { database session { <handle> | all } [ detail ] } } [ __readonly__ [ TABLE_stats { <sender-handle> <last-clear-stats> { <stat-attr> <stat-value> } + } + ] [ TABLE_summary { <last-clear-summary-stats> <tx> <rx> <timeout> <unsent> <resp-tx> <resp-rx> <resp-unsent> <resp-dup> } ] [ TABLE_database { <db-sender-handle> <db-start-time> <db-end-time> <db-last-clear-stats> <db-tx> <db-rx> <db-timeout> <db-unsent> <db-resp-tx> <db-resp-rx> <db-resp-unsent> <db-resp-dup> { <seq-number> <cli-status> [ <reply-ip> ] [ <reply-ipv6> ] [ <ingress-if> ] [ <ingress-if-state> ] [ <egress-if> ] [ <egress-if-state> ] [ <end-row> ] + } + } + ] [ TABLE_ifstats { <if-name> <rx-len> <rx-bytes> <rx-pkt-rate> <rx-byte-rate> <rx-load> <rx-ucast> <rx-mcast> <rx-bcast> <rx-errors> <rx-discards> <rx-unknown> <rx-bandwidth> <tx-len> <tx-bytes> <tx-pkt-rate> <tx-byte-rate> <tx-load> <tx-ucast> <tx-mcast> <tx-bcast> <tx-discards> <tx-errors> <tx-bandwidth> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ngoam

ngoam

pathtrace

ngoam pathtrace

statistics

ngoam pathtrace statistics

end-row

(Optional) Row end

summary

ngoam pathtrace statistics summary

session

ngoam pathtrace session

handle

ngoam pathtrace session handle

all

Display results for all pathtrace sessions

database

ngoam pathtrace results from the database

session

ngoam pathtrace session

all

Display results for all pathtrace sessions

handle

ngoam pathtrace session handle

detail

(Optional) Show detailed stats if present

TABLE_stats

(Optional) statistics table

sender-handle

(Optional) sender handle

last-clear-stats

(Optional) last clear time for statistics

stat-attr

(Optional) stats type

stat-value

(Optional) stats value

TABLE_summary

(Optional) statistics summary table

last-clear-summary-stats

(Optional) last clear time for summary statistics

tx

(Optional) summary request sent

rx

(Optional) summary reply received

timeout

(Optional) summary timeout

unsent

(Optional) summary unsent

resp-tx

(Optional) summary resp tx

resp-rx

(Optional) summary resp rx

resp-unsent

(Optional) summary resp unsent

resp-dup

(Optional) Duplicate responses received

TABLE_database

(Optional) pathtrace database

seq-number

(Optional) Sequence number

cli-status

(Optional) ngoam pathtrace status

ingress-if

(Optional) Ingress interface

egress-if

(Optional) Egress interface

ingress-if-state

(Optional) Ingress interface state

egress-if-state

(Optional) Egress interface state

reply-ip

(Optional) ngoam pathrace reply ip

db-sender-handle

(Optional) Sender handle

db-start-time

(Optional) Start time

db-end-time

(Optional) End time

db-last-clear-stats

(Optional) Last clear stats

db-tx

(Optional) Tx packets

db-rx

(Optional) Rx packets

db-timeout

(Optional) Timeout

db-unsent

(Optional) Unsent

db-resp-tx

(Optional) Response tx

db-resp-rx

(Optional) Response Rx

db-resp-unsent

(Optional) Response unsent

db-resp-dup

(Optional) Duplicate response recvd

TABLE_ifstats

(Optional) Interface statistics

if-name

(Optional) Interface name

rx-len

(Optional) Rx Length

rx-bytes

(Optional) Rx Bytes

rx-pkt-rate

(Optional) Rx packet rate

rx-byte-rate

(Optional) Rx byte rate

rx-load

(Optional) Rx load

rx-ucast

(Optional) Rx unicast pkts

rx-mcast

(Optional) Rx mcast pkts

rx-bcast

(Optional) Rx bcast pkts

rx-discards

(Optional) Rx discards

rx-errors

(Optional) Rx errors

rx-unknown

(Optional) Rx unknown

rx-bandwidth

(Optional) Rx bandwidth

tx-len

(Optional) Tx Length

tx-bytes

(Optional) Tx Bytes

tx-pkt-rate

(Optional) Tx packet rate

tx-byte-rate

(Optional) Tx byte rate

tx-load

(Optional) Tx load

tx-ucast

(Optional) Tx unicast pkts

tx-mcast

(Optional) Tx mcast pkts

tx-bcast

(Optional) Tx bcast pkts

tx-discards

(Optional) Tx discards

tx-errors

(Optional) Tx unknown

tx-bandwidth

(Optional) Tx bandwidth

__readonly__

(Optional) Read Only

Command Mode

- /exec

show ngoam probe

show ngoam probe { { statistics { summary | { session { <handle> | all } } } } } [ __readonly__ [ TABLE_stats { <sender-handle> <transaction-id> <dst-vip> <vni> <oam-type> <flow-str> <last-clear-stats> <req-sent> <req-not-sent> } <statistics-end> ] [ TABLE_summary { <last-clear-summary-stats> <tx> <rx> <timeout> <unsent> <resp-tx> <resp-rx> <resp-unsent> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ngoam

ngoam

probe

ngoam probe

statistics

ngoam probe statistics

summary

ngoam probe statistics summary

session

ngoam probe session

handle

ngoam probe session handle

all

Display results for all probe sessions

TABLE_stats

(Optional) statistics table

sender-handle

(Optional) sender handle

transaction-id

(Optional) Transaction Identifier

dst-vip

(Optional) Destination Vtep ip address

vni

(Optional) vxlan header vni

oam-type

(Optional) draft pang oam type

flow-str

(Optional) 128 byte flow string.

last-clear-stats

(Optional) last clear time for statistics

req-sent

(Optional) request sent

req-not-sent

(Optional) request not sent or failed

statistics-end

(Optional) statistics table end marker

TABLE_summary

(Optional) statistics summary table

last-clear-summary-stats

(Optional) last clear time for summary statistics

tx

(Optional) summary request sent

rx

(Optional) summary reply received

timeout

(Optional) summary timeout

unsent

(Optional) summary unsent

resp-tx

(Optional) summary resp tx

resp-rx

(Optional) summary resp rx

resp-unsent

(Optional) summary resp unsent

__readonly__

(Optional) Read Only

Command Mode

- /exec

show ngoam role

show ngoam role

Syntax Description

Syntax Description

show

Show running system information

ngoam

ngoam information

role

show draft pang derived role info

Command Mode

- /exec

show ngoam traceroute statistics

show ngoam traceroute statistics { summary | { session { <handle> | all } } } [ __readonly__ [ TABLE_stats { <sender-handle> <last-clear-stats> { <stat-attr> <stat-value> } + } + ] [ TABLE_summary { <last-clear-summary-stats> <tx> <rx> <timeout> <unsent> <resp-tx> <resp-rx> <resp-unsent> <resp-dup> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ngoam

ngoam

traceroute

ngoam traceroute

statistics

ngoam traceroute statistics

summary

ngoam traceroute statistics summary

session

ngoam traceroute session

handle

ngoam traceroute session handle

all

Display results for all traceroute sessions

TABLE_stats

(Optional) statistics table

sender-handle

(Optional) sender handle

last-clear-stats

(Optional) last clear time for statistics

stat-attr

(Optional) stats type

stat-value

(Optional) stats value

TABLE_summary

(Optional) statistics summary table

last-clear-summary-stats

(Optional) last clear time for summary statistics

tx

(Optional) summary request sent

rx

(Optional) summary reply received

timeout

(Optional) summary timeout

unsent

(Optional) summary unsent

resp-tx

(Optional) summary resp tx

resp-rx

(Optional) summary resp rx

resp-unsent

(Optional) summary resp unsent

resp-dup

(Optional) Duplicate responses received

__readonly__

(Optional) Read Only

Command Mode

- /exec

show ntp access-groups

show ntp access-groups [ __readonly__ [ <matchall> ] [ { TABLE_accessgroups <accesslist> [ <type> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

access-groups

Display NTP access groups

__readonly__

(Optional)

matchall

(Optional) matchall

TABLE_accessgroups

(Optional) accessgroups

accesslist

(Optional) accesslist

type

(Optional) type

Command Mode

- /exec

show ntp authentication-keys

show ntp authentication-keys [ __readonly__ [ { TABLE_authkeys <Authkey> [ <MD5String> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

authentication-keys

Display authentication keys

__readonly__

(Optional)

TABLE_authkeys

(Optional) authentication keys

Authkey

(Optional) authentication key

MD5String

(Optional) password

Command Mode

- /exec

show ntp authentication-status

show ntp authentication-status [ __readonly__ [ <authentication> ] ]

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

authentication-status

NTP Authentication Status

__readonly__

(Optional)

authentication

(Optional) authentication enabled/disabled

Command Mode

- /exec

show ntp information

show ntp information [ __readonly__ [ <system_type> ] [ <software_version> ] ]

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

information

Show ntp information

__readonly__

(Optional)

system_type

(Optional) Ntp System Type

software_version

(Optional) Ntp Software Version

Command Mode

- /exec

show ntp internal event-history config

show ntp internal event-history config

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

internal

NTP internal info

event-history

Show event history

config

Show configuration history

Command Mode

- /exec

show ntp internal event-history fsm

show ntp internal event-history fsm

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

internal

NTP internal info

event-history

Show event history

fsm

Show fsm state transition

Command Mode

- /exec

show ntp internal event-history msgs

show ntp internal event-history msgs

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

internal

NTP internal info

event-history

Show event history

msgs

Show mts msg history

Command Mode

- /exec

show ntp internal event-history rts

show ntp internal event-history rts

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

internal

NTP internal info

event-history

Show event history

rts

Show rts history

Command Mode

- /exec

show ntp internal event-history tstamp

show ntp internal event-history tstamp

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

internal

NTP internal info

event-history

Show event history

tstamp

Show timestamp update history

Command Mode

- /exec

show ntp internal log-buffer

show ntp internal log-buffer

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

internal

NTP internal info

log-buffer

Show contents of ntp internal log buffer

Command Mode

- /exec

show ntp internal mem-stats

show ntp internal mem-stats

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

internal

NTP internal info

mem-stats

Show memory allocation statistics of NTP

Command Mode

- /exec

show ntp internal mem-stats detail

show ntp internal mem-stats detail

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

internal

NTP internal info

mem-stats

Show memory allocation statistics of NTP

detail

Show memory allocation statistics of NTP in detail

Command Mode

- /exec

show ntp internal module-info

show ntp internal module-info

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

internal

NTP internal info

module-info

Show all Linecards related information

Command Mode

- /exec

show ntp logging-status

show ntp logging-status [ __readonly__ [ <loggingstatus> ] ]

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

logging-status

Display NTP logging status

__readonly__

(Optional)

loggingstatus

(Optional) logging enabled/disabled

Command Mode

- /exec

show ntp peer-status

show ntp peer-status [ __readonly__ [ <totalpeers> ] [ { TABLE_peersstatus <syncmode> <remote> <local> <st> <poll> <reach> <delay> [ <vrf> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

peer-status

Show the status for all the server/peers

__readonly__

(Optional)

totalpeers

(Optional) totalpeers

TABLE_peersstatus

(Optional) peersstatus

syncmode

(Optional) peermode

remote

(Optional) remote addr

local

(Optional) local addr

st

(Optional) stratum

poll

(Optional) ntp poll

reach

(Optional) reach

delay

(Optional) delay

vrf

(Optional) vrf name

Command Mode

- /exec

show ntp peers

show ntp peers [ __readonly__ [ { TABLE_peers <PeerIPAddress> <serv_peer> <conf_flag> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

peers

Show all the peers.

__readonly__

(Optional)

TABLE_peers

(Optional) peers

PeerIPAddress

(Optional) peer Ip addr

serv_peer

(Optional) server or peer

conf_flag

(Optional) configured or dynamic

Command Mode

- /exec

show ntp rts-update

show ntp rts-update [ __readonly__ [ <rtsupdate> ] ]

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

rts-update

Show if the RTS update is enabled

__readonly__

(Optional)

rtsupdate

(Optional) rts update enabled/disabled

Command Mode

- /exec

show ntp session status

show ntp session status [ __readonly__ [ <session_status> ] ]

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

session

Show the session information

status

Show the session status

__readonly__

(Optional)

session_status

(Optional) last session status

Command Mode

- /exec

show ntp source-interface

show ntp source-interface [ __readonly__ [ <sourceinterface> ] ]

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

source-interface

Source interface configured

__readonly__

(Optional)

sourceinterface

(Optional) source interface

Command Mode

- /exec

show ntp source

show ntp source [ __readonly__ [ <sourceip> ] ]

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

source

Source IP address configured

__readonly__

(Optional)

sourceip

(Optional) source ip addr

Command Mode

- /exec

show ntp statistics

show ntp statistics { [ io ] | [ local ] | [ memory ] | peer { ipaddr { <ipv4_0> | <ipv6_1> } | name <s0> } } [ __readonly__ [ { <iotimesincereset> <ioreceivebuffers> <iofreereceivebuffers> <iousedreceivebuffers> <iolowwaterrefills> <iodroppedpackets> <ioignoredpackets> <ioreceivedpackets> <iopacketssent> <iopacketsnotsent> <iointerruptshandled> <ioreceivedbyint> } ] [ { <localsystemuptime> <localtimesincereset> <localoldversionpackets> <localnewversionpackets> <localunknownversionnumber> <localbadpacketformat> <localpacketsprocessed> <localbadauthentication> [ <localpacketsrejected> ] } ] [ { <memtimesincereset> <memtotalpeermemory> <memfreepeermemory> <memcallstofindpeer> <memnewpeerallocations> <mempeerdemobilizations> <memhashtablecounts> } ] [ { <peeripremotehost> <peeriplocalinterface> <peeriptimelastreceived> <peeriptimeuntilnextsend> <peeripreachabilitychange> <peerippacketssent> <peerippacketsreceived> <peeripbadauthentication> <peeripbogusorigin> <peeripduplicate> <peeripbaddispersion> <peeripbadreferencetime> <peeripcandidateorder> } ] [ { <peernameremotehost> <peernamelocalinterface> <peernametimelastreceived> <peernametimeuntilnextsend> <peernamereachabilitychange> <peernamepacketssent> <peernamepacketsreceived> <peernamebadauthentication> <peernamebogusorigin> <peernameduplicate> <peernameduplicate> <peernamebaddispersion> <peernamebadreferencetime> <peernamecandidateorder> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

statistics

Show the NTP statistics

io

(Optional) Show the input-output statistics.

local

(Optional) Show the counters maintained by the local NTP.

memory

(Optional) Show the statistics counters related to memory code.

peer

Show the per-peer statistics counter of a peer.

ipaddr

Peer's IP address

ipv4_0

name

Peer's Name

s0

__readonly__

(Optional)

iotimesincereset

(Optional) time since reset

ioreceivebuffers

(Optional) receive buffers

iofreereceivebuffers

(Optional) free receive buffers

iousedreceivebuffers

(Optional) used receive buffers

iolowwaterrefills

(Optional) low water refills

iodroppedpackets

(Optional) dropped packets

ioignoredpackets

(Optional) ignored packets

ioreceivedpackets

(Optional) received packets

iopacketssent

(Optional) packets sent

iopacketsnotsent

(Optional) packets not sent

iointerruptshandled

(Optional) interrupts handled

ioreceivedbyint

(Optional) received by int

localsystemuptime

(Optional) system up time

localtimesincereset

(Optional) time since reset

localoldversionpackets

(Optional) old version packets

localnewversionpackets

(Optional) new version packets

localunknownversionnumber

(Optional) unknown version number

localbadpacketformat

(Optional) bad packet format

localpacketsprocessed

(Optional) packets processed

localbadauthentication

(Optional) bad authentication

localpacketsrejected

(Optional) packets rejected

memtimesincereset

(Optional) time since reset

memtotalpeermemory

(Optional) total peer memory

memfreepeermemory

(Optional) free peer memory

memcallstofindpeer

(Optional) calls to find peer

memnewpeerallocations

(Optional) new peer allocations

mempeerdemobilizations

(Optional) peer demobilizations

memhashtablecounts

(Optional) hash table counts

peeripremotehost

(Optional) peeripremotehost

peeriplocalinterface

(Optional) peeriplocalinterface

peeriptimelastreceived

(Optional) peeriptimelastreceived

peeriptimeuntilnextsend

(Optional) peeriptimeuntilnextsend

peeripreachabilitychange

(Optional) peeripreachabilitychange

peerippacketssent

(Optional) peerippacketssent

peerippacketsreceived

(Optional) peerippacketsreceived

peeripbadauthentication

(Optional) peeripbadauthentication

peeripbogusorigin

(Optional) peeripbogusorigin

peeripduplicate

(Optional) peeripduplicate

peeripbaddispersion

(Optional) peeripbaddispersion

peeripbadreferencetime

(Optional) peeripbadreferencetime

peeripcandidateorder

(Optional) peeripcandidateorder

peernameremotehost

(Optional) peernameremotehost

peernamelocalinterface

(Optional) peernamelocalinterface

peernametimelastreceived

(Optional) peernametimelastreceived

peernametimeuntilnextsend

(Optional) peernametimeuntilnextsend

peernamereachabilitychange

(Optional) peernamereachabilitychange

peernamepacketssent

(Optional) peernamepacketssent

peernamepacketsreceived

(Optional) peernamepacketsreceived

peernamebadauthentication

(Optional) peernamebadauthentication

peernamebogusorigin

(Optional) peernamebogusorigin

peernameduplicate

(Optional) peernameduplicate

peernamebaddispersion

(Optional) peernamebaddispersion

peernamebadreferencetime

(Optional) peernamebadreferencetime

peernamecandidateorder

(Optional) peernamecandidateorder

Command Mode

- /exec

show ntp status

show ntp status [ __readonly__ [ <distribution> ] [ <operational_state> ] ]

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

status

Show the NTP distribution status

__readonly__

(Optional)

distribution

(Optional) distribution enabled/disabled

operational_state

(Optional) last operation status

Command Mode

- /exec

show ntp trusted-keys

show ntp trusted-keys [ __readonly__ [ { TABLE_trustkeys <key> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ntp

Show NTP information

trusted-keys

Display trusted keys

__readonly__

(Optional)

TABLE_trustkeys

(Optional) trusted keys

key

(Optional) trusted key

Command Mode

- /exec

show nve bfd neighbors

show nve bfd neighbors [ __readonly__ [ TABLE_nve_bfd_neighbors <if-name> [ { <neighbor-vtep-ip> <neighbor-inner-ip> <neighbor-inner-mac> <neighbor-cc-state> } ] ] ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

bfd

BFD

neighbors

neighbors

__readonly__

(Optional)

TABLE_nve_bfd_neighbors

(Optional) BFD neighbors schema

if-name

(Optional) if-name

neighbor-vtep-ip

(Optional) Remote VTEP IP address

neighbor-inner-ip

(Optional) Remote VTEP Inner IP address

neighbor-inner-mac

(Optional) Remote VTEP Inner MAC address

neighbor-cc-state

(Optional) Remote VTEP vPC consistency check state

Command Mode

- /exec

show nve core-links

show nve core-links [ __readonly__ [ TABLE_core_link <if-name> <if-state> ] ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

core-links

Core-links

__readonly__

(Optional)

TABLE_core_link

(Optional) xml schema for show nve core-links

if-name

(Optional) core-link interface name

if-state

(Optional) core-link interface oper state

Command Mode

- /exec

show nve ethernet-segment

show nve ethernet-segment [ summary ] [ { esi <esi-id> } ] [ __readonly__ [ TABLE_es <esi> <if-name> <es-state> <po-state> <nve-if-name> <nve-state> <host-reach-mode> <active-vlans> <df-vlans> <active-vnis> <cc-failed-vlans> <cc-timer-left> <num-es-mem> <local-ordinal> <df-timer-st> <config-status> <df-list> <es-rt-added> <ead-rt-added> <ead-evi-rt-timer-age> ] ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

ethernet-segment

Ethernet-segment

summary

(Optional) Ethernet-segment summary

esi

(Optional) ESI Value

esi-id

(Optional) ESI ID

__readonly__

(Optional)

TABLE_es

(Optional) xml schema for show nve ethernet-segment

esi

(Optional) ESI value

if-name

(Optional) port-channel interface name

es-state

(Optional) Ethernet-segment oper state

po-state

(Optional) port-channel interface oper state

nve-if-name

(Optional) NVE interface name

nve-state

(Optional) NVE oper state

host-reach-mode

(Optional) host reach mode

active-vlans

(Optional) Active vlans on ES

df-vlans

(Optional) DF-vlans on ES

active-vnis

(Optional) Active VNIs on ES

cc-failed-vlans

(Optional) Vlans for which consistency check failed

cc-timer-left

(Optional) vlan CC timer status

num-es-mem

(Optional) number of es members

local-ordinal

(Optional) local-ordinal

df-timer-st

(Optional) df election start timer

config-status

(Optional) config state

df-list

(Optional) List of router-ips in DF list

es-rt-added

(Optional) ES route added to L2RIB

ead-rt-added

(Optional) EAD routes added to L2RIB

ead-evi-rt-timer-age

(Optional) EAD/EVI route advertisement timer age

Command Mode

- /exec

show nve interface

show nve interface [ <nve-if> [ detail ] ] [ __readonly__ [ TABLE_nve_if { <if-name> <if-state> <encap-type> <vpc-capability> <local-rmac> <host-reach-mode> <source-if> <primary-ip> <secondary-ip> [ { <src-if-state> <nve-flags> <nve-if-handle> <src-if-holddown-tm> <src-if-holdup-tm> <src-if-holddown-left> [ <es-delay-restore-time> <es-delay-restore-time-left> ] <src-intf-last-reinit-notify-type> } ] } ] ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

interface

Interface

nve-if

(Optional) NVE interface

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_nve_if

(Optional) xml schema for show nve interfaces

if-name

(Optional) interface name

if-state

(Optional) interface oper state

encap-type

(Optional) encap-type

source-if

(Optional) source-interface

primary-ip

(Optional) primary-ip

secondary-ip

(Optional) secondary-ip

src-if-state

(Optional) source-interface state

nve-flags

(Optional) nve-flags

nve-if-handle

(Optional) interface handle

vpc-capability

(Optional) vpc capability

local-rmac

(Optional) local router mac

host-reach-mode

(Optional) host reach mode

src-if-holddown-tm

(Optional) hold down time

src-if-holdup-tm

(Optional) hold up time

src-if-holddown-left

(Optional) hold down time left

es-delay-restore-time

(Optional) es delay restore time

es-delay-restore-time-left

(Optional) es delay restore time left

src-intf-last-reinit-notify-type

(Optional) Src-Intf last notify type

Command Mode

- /exec

show nve internal bfd neighbors interface

show nve internal bfd neighbors interface <nve-if>

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

bfd

BFD

neighbors

BFD neighbors

interface

NVE interface

nve-if

NVE interface

Command Mode

- /exec

show nve internal bgp rnh database

show nve internal bgp rnh database [ vni <vni-id> ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

internal

internal

bgp

BGP

rnh

RNH

database

database

vni

(Optional) Virtual Network Identifier

vni-id

(Optional) Virtual Network Identifier

Command Mode

- /exec

show nve internal es-history

show nve internal es-history [ esi ] [ ead-es-route | ead-evi-route | es-route | es-events | df-election | sh-programming ]

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

es-history

Show internal es-history

esi

(Optional)

ead-es-route

(Optional)

ead-evi-route

(Optional)

es-route

(Optional)

es-events

(Optional)

df-election

(Optional)

sh-programming

(Optional)

Command Mode

- /exec

show nve internal event-history cli

show nve internal event-history cli

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

event-history

Show various event logs of NVE

cli

CLI event debugging

Command Mode

- /exec

show nve internal event-history errors

show nve internal event-history errors

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

event-history

Show various event logs of NVE

errors

Error messages

Command Mode

- /exec

show nve internal event-history events

show nve internal event-history events

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

event-history

Show various event logs of NVE

events

Trace Event debugs

Command Mode

- /exec

show nve internal event-history msgs

show nve internal event-history msgs

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

event-history

Show various event logs of NVE

msgs

Messages debugging

Command Mode

- /exec

show nve internal event-history mts

show nve internal event-history mts

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

event-history

Show various event logs of NVE

mts

MTS debugs

Command Mode

- /exec

show nve internal event-history packets

show nve internal event-history packets

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

event-history

Show various event logs of NVE

packets

Packets

Command Mode

- /exec

show nve internal event-history platform errors

show nve internal event-history platform errors

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

event-history

Show various event logs of NVE

platform

platform library

errors

Error messages

Command Mode

- /exec

show nve internal event-history platform traces

show nve internal event-history platform traces

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

event-history

Show various event logs of NVE

platform

platform library

traces

traces

Command Mode

- /exec

show nve internal event-history platform triggers

show nve internal event-history platform triggers

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

event-history

Show various event logs of NVE

platform

platform library

triggers

Trigger messages

Command Mode

- /exec

show nve internal event-history pss

show nve internal event-history pss

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

event-history

Show various event logs of NVE

pss

PSS debugs

Command Mode

- /exec

show nve internal event-history triggers

show nve internal event-history triggers

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

event-history

Show various event logs of NVE

triggers

Trigger messages

Command Mode

- /exec

show nve internal event-history xos-events

show nve internal event-history xos-events

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

event-history

Show various event logs of NVE

xos-events

XOS Event debugs

Command Mode

- /exec

show nve internal export bgp rnh

show nve internal export bgp rnh

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

export

export data

bgp

bgp info

rnh

rnh info

Command Mode

- /exec

show nve internal export controller peers

show nve internal export controller peers

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

export

export data

controller

Controller mode

peers

Peers

Command Mode

- /exec

show nve internal export es

show nve internal export es

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

export

export data

es

es data

Command Mode

- /exec

show nve internal export es

show nve internal export es

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

export

export data

es

es data

Command Mode

- /exec

show nve internal export global

show nve internal export global

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

export

export data

global

global data

Command Mode

- /exec

show nve internal export nve

show nve internal export nve

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

export

export data

nve

nve interface

Command Mode

- /exec

show nve internal export peer-vni

show nve internal export peer-vni

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

export

export data

peer-vni

peer vni

Command Mode

- /exec

show nve internal export peer

show nve internal export peer

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

export

export data

peer

peer information

Command Mode

- /exec

show nve internal export redundancy-group

show nve internal export redundancy-group

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

export

export data

redundancy-group

redundancy-group list

Command Mode

- /exec

show nve internal export vni

show nve internal export vni [ <vni-id> ]

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

export

export data

vni

Virtual Network Identifier

vni-id

(Optional) Virtual Network Identifier

Command Mode

- /exec

show nve internal libinfo

show nve internal libinfo

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

libinfo

Show internal libinfo information

Command Mode

- /exec

show nve internal mem-stats

show nve internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

mem-stats

Dynamic memory stats

detail

(Optional) Detailed information

Command Mode

- /exec

show nve internal mrib-history

show nve internal mrib-history [ group <group-addr> | clear ]

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

mrib-history

Show internal mrib-history

group

(Optional)

group-addr

(Optional)

clear

(Optional)

Command Mode

- /exec

show nve internal multicast-group

show nve internal multicast-group

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

multicast-group

Show internal multicast group state

Command Mode

- /exec

show nve internal peer-history

show nve internal peer-history [ peer <peer-addr> | clear ]

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

peer-history

Show internal peer-history

peer

(Optional)

peer-addr

(Optional)

clear

(Optional)

Command Mode

- /exec

show nve internal peer-notify-history

show nve internal peer-notify-history [ clear ]

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

peer-notify-history

Show internal peer-notify-history

clear

(Optional)

Command Mode

- /exec

show nve internal peers history-log

show nve internal peers [ peer-ip <addr> ] history-log

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

internal

internal

peers

NVE Peer

peer-ip

(Optional) Show a specific peer

addr

(Optional) Remote Peer IP Address

history-log

Peer history log

Command Mode

- /exec

show nve internal pim-cache

show nve internal pim-cache [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

pim-cache

Show PIM client cache

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show nve internal platform globals

show nve internal platform globals

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

platform

NVE Platform library commands

globals

Global info

Command Mode

- /exec

show nve internal platform interface

show nve internal platform interface [ <nve-if> [ { vni [ <vni-id> ] } | { peer [ <peerip> ] } ] ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

platform

NVE Platform library commands

internal

NVE Internal State

interface

Interface

nve-if

(Optional) Specify NVE interface, else all NVE interfaces will be displayed

vni

(Optional) Virtual Network Identifier

vni-id

(Optional) Specify VNI

peer

(Optional) Display Peer Information

peerip

(Optional) Specify Peer IPv4 Address

detail

(Optional) Detailed information about the interface

Command Mode

- /exec

show nve internal platform statistics

show nve internal platform statistics [ clear ]

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

platform

NVE Platform library commands

statistics

statistics

clear

(Optional) Reset functions

Command Mode

- /exec

show nve internal platform txn_buf

show nve internal platform txn_buf { sw_bd | peer_id | peer_adj }

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

platform

NVE Platform library commands

internal

NVE Internal State

txn_buf

MTS transaction buffer

sw_bd

UFDM Software BD transaction buffer

peer_id

UFDM Peer ID transaction buffer

peer_adj

UFDM Peer adjacency transaction buffer

Command Mode

- /exec

show nve internal port-history

show nve internal port-history [ clear ]

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

port-history

Show internal port-history

clear

(Optional)

Command Mode

- /exec

show nve internal pss ethernet-segment

show nve internal pss ethernet-segment

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

pss

Show pss content

ethernet-segment

Ethernet-segments

Command Mode

- /exec

show nve internal pss redundancy-group

show nve internal pss redundancy-group

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

pss

Show pss content

redundancy-group

redundancy-group list

Command Mode

- /exec

show nve internal pss replication-servers

show nve internal pss replication-servers

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

pss

Show pss content

replication-servers

replication-servers

Command Mode

- /exec

show nve internal snmp cnvoNvoPerPeerStatsTable nve paddr_type paddr

show nve internal snmp cnvoNvoPerPeerStatsTable nve <nve_in> paddr_type <paddr_type_in> paddr <paddr_in> [ __readonly__ TABLE_nve_peer_counters <nve_out> <paddr_type_out> <paddr_out> <tx_uni_p> <tx_uni_b> <tx_multi_p> <tx_multi_b> <rx_uni_p> <rx_uni_b> <rx_multi_p> <rx_multi_b> ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

internal

internal

snmp

snmp

cnvoNvoPerPeerStatsTable

nve

nve_in

paddr_type

paddr_type_in

paddr

paddr_in

Remote Peer IP Address

__readonly__

(Optional)

TABLE_nve_peer_counters

(Optional)

nve_out

(Optional)

paddr_type_out

(Optional)

paddr_out

(Optional)

tx_uni_p

(Optional)

tx_uni_b

(Optional)

tx_multi_p

(Optional)

tx_multi_b

(Optional)

rx_uni_p

(Optional)

rx_uni_b

(Optional)

rx_multi_p

(Optional)

rx_multi_b

(Optional)

Command Mode

- /exec

show nve internal snmp cnvoNvoTable nve

show nve internal snmp cnvoNvoTable nve <nve_in> [ __readonly__ TABLE_nve_intf <nve_out> <nve_src_intf> <encap_type> <configured_vni> <storage_type> <row_status> ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

internal

internal

snmp

snmp

cnvoNvoTable

nve

nve_in

__readonly__

(Optional)

TABLE_nve_intf

(Optional)

nve_out

(Optional)

nve_src_intf

(Optional)

encap_type

(Optional)

configured_vni

(Optional)

storage_type

(Optional)

row_status

(Optional)

Command Mode

- /exec

show nve internal snmp cnvoPeerTable nve paddr_type paddr

show nve internal snmp cnvoPeerTable nve <nve_in> paddr_type <paddr_type_in> paddr <paddr_in> [ __readonly__ TABLE_nve_peer <nve_out> <paddr_type_out> <paddr_out> <peer_uptime> <learning_source_type> ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

internal

internal

snmp

snmp

cnvoPeerTable

nve

nve_in

paddr_type

paddr_type_in

paddr

paddr_in

__readonly__

(Optional)

TABLE_nve_peer

(Optional)

nve_out

(Optional)

paddr_type_out

(Optional)

paddr_out

(Optional)

peer_uptime

(Optional)

learning_source_type

(Optional)

Command Mode

- /exec

show nve internal snmp cnvoVNetStatsTable nve vni

show nve internal snmp cnvoVNetStatsTable nve <nve_in> vni <vni_in> [ __readonly__ TABLE_nve_vni_counters <nve_out> <vni_out> <tx_uni_p> <tx_uni_b> <tx_multi_p> <tx_multi_b> <rx_uni_p> <rx_uni_b> <rx_multi_p> <rx_multi_b> ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

internal

internal

snmp

snmp

cnvoVNetStatsTable

nve

nve_in

vni

vni_in

__readonly__

(Optional)

TABLE_nve_vni_counters

(Optional)

nve_out

(Optional)

vni_out

(Optional)

tx_uni_p

(Optional)

tx_uni_b

(Optional)

tx_multi_p

(Optional)

tx_multi_b

(Optional)

rx_uni_p

(Optional)

rx_uni_b

(Optional)

rx_multi_p

(Optional)

rx_multi_b

(Optional)

Command Mode

- /exec

show nve internal snmp cnvoVNetTable nve vni

show nve internal snmp cnvoVNetTable nve <nve_in> vni <vni_in> [ __readonly__ TABLE_nve_vni <nve_out> <vni_out> <mcast_addr_type> <mcast_addr> <vni_vlan> <arp_suppression> <replication> <host_reachability> <vni_type> <vrf_or_bridgename> <mac_addr> ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

internal

internal

snmp

snmp

cnvoVNetTable

nve

nve_in

vni

vni_in

__readonly__

(Optional)

TABLE_nve_vni

(Optional)

nve_out

(Optional)

vni_out

(Optional)

mcast_addr_type

(Optional)

mcast_addr

(Optional)

vni_vlan

(Optional)

arp_suppression

(Optional)

replication

(Optional)

host_reachability

(Optional)

vni_type

(Optional)

vrf_or_bridgename

(Optional)

mac_addr

(Optional)

Command Mode

- /exec

show nve internal snmp global cnvoUdpDestinationPort

show nve internal snmp global cnvoUdpDestinationPort [ __readonly__ <udp_dest_port> ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

internal

internal

snmp

snmp

global

cnvoUdpDestinationPort

__readonly__

(Optional) Read only

udp_dest_port

(Optional)

Command Mode

- /exec

show nve internal source-group

show nve internal source-group

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

source-group

Show source-group state

Command Mode

- /exec

show nve internal state

show nve internal state

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

state

Show NVE state

Command Mode

- /exec

show nve internal statistics

show nve internal statistics { mts | interface <nve-if> | vni <vni-id> | peer <addr> } [ clear ]

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

statistics

statistics

mts

MTS

interface

Interface

nve-if

NVE interface

vni

Virtual Network Identifier

vni-id

VNI-ID

peer

NVE Peer

addr

Remote Peer IP Address

clear

(Optional) Reset functions

Command Mode

- /exec

show nve internal txlist source

show nve internal txlist { source-group }

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

txlist

Show txlist state

source-group

Source Group txlist state

Command Mode

- /exec

show nve internal vlan-cache

show nve internal vlan-cache

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

vlan-cache

Vlan admin state cache

Command Mode

- /exec

show nve internal vlan-cc

show nve internal vlan-cc

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

vlan-cc

Vlan consistency-check info

Command Mode

- /exec

show nve internal vni-history

show nve internal vni-history [ vni <vni> | clear ]

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

vni-history

Show internal vni-history

vni

(Optional)

vni

(Optional)

clear

(Optional)

Command Mode

- /exec

show nve internal vni

show nve internal vni { <vni-id> | all }

Syntax Description

Syntax Description

show

Show running system information

nve

Display NVE information

internal

NVE Internal State

vni

Virtual Network Identifier

all

Show status of all vnis

vni-id

Virtual Network Identifier

Command Mode

- /exec

show nve peers

show nve peers [ [ [ interface <nve-if> | peer-ip <user-peer-ip> | control-plane | data-plane ] [ detail ] ] | [ control-plane-vni [ vni <vni-id> | peer-ip <user-peer-ip> ] ] | [ controller ] ] [ __readonly__ TABLE_nve_peers [ [ <if-name> ] [ <peer-ip> ] [ <peer-state> ] [ <learn-type> ] [ <uptime> ] [ <router-mac> ] [ { <first-vni> <create-ts> <config-vnis> <provision-state> <route-update> <peer-flags> <cp-vni> <peer-ifindex-resp> } ] [ { <vni> <learn-src> <vni-gw-mac> } ] ] ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

peers

Show peers

interface

(Optional) Interface

nve-if

(Optional) NVE interface

detail

(Optional) Detailed information

peer-ip

(Optional) Show a specific peer

user-peer-ip

(Optional) Remote Peer IP address

control-plane

(Optional) Show peers learned via control plane

data-plane

(Optional) Show peers learned via data plane

control-plane-vni

(Optional) Show details of control plane vnis

vni

(Optional) VNI ID

vni-id

(Optional) Virtual Network Identifier

controller

(Optional) Show peers configured by controller

__readonly__

(Optional)

TABLE_nve_peers

(Optional) schema peer

if-name

(Optional) if-name

peer-ip

(Optional) peer-ip

peer-state

(Optional) peer-state

learn-type

(Optional) learn-type

uptime

(Optional) uptime

first-vni

(Optional) first-vni

config-vnis

(Optional) config-vnis

provision-state

(Optional) provision-state

route-update

(Optional) route-update

peer-flags

(Optional) peer-flags

cp-vni

(Optional) cp-vni

peer-ifindex-resp

(Optional) peer-ifindex-resp

create-ts

(Optional) create-timestamp

router-mac

(Optional) router-mac

vni

(Optional) vni value

learn-src

(Optional) learn source

vni-gw-mac

(Optional) vni gateway mac

Command Mode

- /exec

show nve peers interface counters

show nve peers <addr> interface <nve-if>counters [ __readonly__ <peer-ip> <tx_ucastpkts> <tx_ucastbytes> <tx_mcastpkts> <tx_mcastbytes> <rx_ucastpkts> <rx_ucastbytes> <rx_mcastpkts> <rx_mcastbytes> ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

peers

NVE Peer

addr

Remote Peer IP Address

interface

Interface

__readonly__

(Optional)

peer-ip

(Optional)

tx_ucastpkts

(Optional)

tx_ucastbytes

(Optional)

tx_mcastpkts

(Optional)

tx_mcastbytes

(Optional)

rx_ucastpkts

(Optional)

rx_ucastbytes

(Optional)

rx_mcastpkts

(Optional)

rx_mcastbytes

(Optional)

Command Mode

- /exec

show nve peers vni interface counters

show nve peers { <addr> | all } vni { <vni-id> | all } interface <nve-if>counters [ __readonly__ TABLE_nve_peer_vni_counters <peer-ip> <vni> <tx_ucastpkts> <tx_ucastbytes> <tx_mcastpkts> <tx_mcastbytes> <rx_ucastpkts> <rx_ucastbytes> <rx_mcastpkts> <rx_mcastbytes> ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

peers

NVE Peer

addr

Remote Peer IP Address

all

Show counters for all peers/VNIs

vni

Virtual Network Identifier

vni-id

Virtual Network Identifier

interface

Interface

__readonly__

(Optional)

TABLE_nve_peer_vni_counters

(Optional)

peer-ip

(Optional)

vni

(Optional)

tx_ucastpkts

(Optional)

tx_ucastbytes

(Optional)

tx_mcastpkts

(Optional)

tx_mcastbytes

(Optional)

rx_ucastpkts

(Optional)

rx_ucastbytes

(Optional)

rx_mcastpkts

(Optional)

rx_mcastbytes

(Optional)

Command Mode

- /exec

show nve replication-servers

show nve replication-servers [ __readonly__ [ TABLE_nve_replication_servers <if-name> [ { <server-ip> <server-state> <server-ready> } ] ] ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

replication-servers

replication-servers

__readonly__

(Optional)

TABLE_nve_replication_servers

(Optional) replcation servers schema

if-name

(Optional) if-name

server-ip

(Optional) Server IP address

server-state

(Optional) Server reachability state

server-ready

(Optional) Server ready state

Command Mode

- /exec

show nve vni

show nve vni [ { { interface <nve-if> | <vni-id> } [ detail ] } | control-plane | data-plane | summary | controller ] [ __readonly__ [ TABLE_nve_vni [ <if-name> <vni> <mcast> <vni-state> <mode> <type> <flags> [ { <prvsn-state> <vlan-bd> <svi-state> <cp-submode> } ] ] [ { <cp-vni-count> <cp-vni-up> <cp-vni-down> <dp-vni-count> <dp-vni-up> <dp-vni-down> } ] ] ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

vni

Virtual Network Identifier

vni-id

(Optional) Virtual Network Identifier

interface

(Optional) Interface

nve-if

(Optional) NVE interface

detail

(Optional) Detailed information

control-plane

(Optional) show vni learned via BGP

data-plane

(Optional) show vni learned via data plane

summary

(Optional) show vni summary

controller

(Optional) show vni configured by controller

__readonly__

(Optional)

TABLE_nve_vni

(Optional) vni schema

if-name

(Optional) if-name

vni

(Optional) vni

mcast

(Optional) mcast

vni-state

(Optional) vni-state

mode

(Optional) vni-mode

type

(Optional) vni-type

flags

(Optional) vni-flags

prvsn-state

(Optional) provision-state

vlan-bd

(Optional) vlan-bd

svi-state

(Optional) svi-state

cp-submode

(Optional) CP-submode

cp-vni-count

(Optional) CP vni count

cp-vni-up

(Optional) CP vni up count

cp-vni-down

(Optional) CP vni down count

dp-vni-count

(Optional) DP vni count

dp-vni-up

(Optional) DP vni up count

dp-vni-down

(Optional) DP vni down count

Command Mode

- /exec

show nve vni counters

show nve vni <vni-id> counters [ __readonly__ <vni> <tx_ucastpkts> <tx_ucastbytes> <tx_mcastpkts> <tx_mcastbytes> <rx_ucastpkts> <rx_ucastbytes> <rx_mcastpkts> <rx_mcastbytes> ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

vni

Virtual Network Identifier

vni-id

Virtual Network Identifier

counters

Counters

__readonly__

(Optional)

vni

(Optional)

tx_ucastpkts

(Optional)

tx_ucastbytes

(Optional)

tx_mcastpkts

(Optional)

tx_mcastbytes

(Optional)

rx_ucastpkts

(Optional)

rx_ucastbytes

(Optional)

rx_mcastpkts

(Optional)

rx_mcastbytes

(Optional)

Command Mode

- /exec

show nve vni ingress-replication

show nve vni ingress-replication [ { interface <nve-if> | <vni-id> } ] [ __readonly__ [ TABLE_nve_vni_ingr_repl <if-name> <vni> [ { <repl-ip> <source> <up-time> } ] ] ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

vni

Virtual Network Identifier

ingress-replication

ingress-replication

vni-id

(Optional) Virtual Network Identifier

interface

(Optional) Interface

nve-if

(Optional) NVE interface

__readonly__

(Optional)

TABLE_nve_vni_ingr_repl

(Optional) vni ingress repl schema

if-name

(Optional) if-name

vni

(Optional) vni

repl-ip

(Optional) Replication List

source

(Optional) Source

up-time

(Optional) Up Time

Command Mode

- /exec

show nve vni peer-vtep

show nve vni peer-vtep [ { interface <nve-if> | <vni-id> } ] [ __readonly__ [ TABLE_nve_vni_peer_vtep <if-name> <vni> [ { <vtep-ip> <source> <up-time> } ] ] ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

vni

Virtual Network Identifier

peer-vtep

Show static peer-vtep configured per vni

vni-id

(Optional) Virtual Network Identifier

interface

(Optional) Interface

nve-if

(Optional) NVE interface

__readonly__

(Optional)

TABLE_nve_vni_peer_vtep

(Optional) vni peer vtep schema

if-name

(Optional) if-name

vni

(Optional) vni

vtep-ip

(Optional) VTEP List

source

(Optional) Source

up-time

(Optional) Up Time

Command Mode

- /exec

show nve vrf

show nve vrf [ vrf-name ] [ __readonly__ [ TABLE_nve_vrf <vrf-name> <vni> <if-name> <gateway-mac> [ { <ipv4-tblid> <ipv6-tblid> <vni-sw-bd> <flags> } ] ] ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

vrf

VRF name

vrf-name

(Optional) vrf name

__readonly__

(Optional)

TABLE_nve_vrf

(Optional) vrf schema

vrf-name

(Optional) vrf-name

vni

(Optional) vni

if-name

(Optional) if-name

gateway-mac

(Optional) gateway-mac

ipv4-tblid

(Optional) ipv4-table-id

ipv6-tblid

(Optional) ipv6-table-id

vni-sw-bd

(Optional) vni-sw-bd

flags

(Optional) flags

Command Mode

- /exec

show nve vxlan-params

show nve vxlan-params [ __readonly__ <vxlan-port> ]

Syntax Description

Syntax Description

show

Display NVE information

nve

Configure NVE information

vxlan-params

VxLAN Parameters

__readonly__

(Optional)

vxlan-port

(Optional) vxlan-params

Command Mode

- /exec

show nxapi-server logs

show nxapi-server logs

Syntax Description

Syntax Description

show

Show running system information

nxapi-server

Show NX-API Server

logs

Show NX-API Server logs

Command Mode

- /exec

show nxapi

show nxapi [ __readonly__ { operation_status <o_status> } [ configuration_error <c_error> ] { TABLE_listen_on_port <l_port> } ]

Syntax Description

Syntax Description

show

Show running system information

nxapi

Show nxapi status

__readonly__

(Optional)

operation_status

(Optional) run-time information about nxapi

o_status

(Optional) enabled or not

configuration_error

(Optional) config syntax error

c_error

(Optional) confg syntax error

TABLE_listen_on_port

(Optional) listen on port table

l_port

(Optional) listen on port

Command Mode

- /exec

show nxapi internal buffer

show nxapi internal buffer

Syntax Description

Syntax Description

show

Show running system information

internal

Commands for internal use

nxapi

Show information about nxapi

buffer

Show dme buffer

Command Mode

- /exec

show nxsdk internal debug

show nxsdk internal debug

Syntax Description

Syntax Description

show

Show running system information

nxsdk

NXOS SDK

internal

Internal information

debug

Internal debug info maintained by nxsdk

Command Mode

- /exec

show nxsdk internal event-history

show nxsdk internal event-history { errors | msgs | trace | events | ha | periodic }

Syntax Description

Syntax Description

show

Show running system information

nxsdk

NXOS SDK

internal

Internal information

event-history

Show various event logs of nxsdk

errors

Show error logs of nxsdk

msgs

Show various message logs of nxsdk

trace

Show processing logs of nxsdk

events

Show nxsdk process events

ha

Show nxsdk process HA events

periodic

Show nxsdk process periodic events

Command Mode

- /exec

show nxsdk internal mem-stats

show nxsdk internal mem-stats [ all ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

nxsdk

NXOS SDK

internal

Internal information

mem-stats

Dynamic memory stats

all

(Optional) Display private and shared memory statistics

detail

(Optional) Detailed information

Command Mode

- /exec

show nxsdk internal pss

show nxsdk internal pss

Syntax Description

Syntax Description

show

Show running system information

nxsdk

NXOS SDK

internal

Internal information

pss

Internal nxsdk pss info

Command Mode

- /exec

show nxsdk internal service

show nxsdk internal service

Syntax Description

Syntax Description

show

Show running system information

nxsdk

NXOS SDK

internal

Internal information

service

service

Command Mode

- /exec

Chapter 15. O Show Commands

- show object-group

- show onep

- show onep cli-extensions applications

- show onep error

- show onep history

- show onep internal api statistics

- show onep internal session-manager

- show onep statistics

- show onep status

- show onep trace

- show openflow hardware capabilities

- show openflow internal

- show openflow internal event-history errors

- show openflow internal event-history events

- show openflow internal event-history mts

- show openflow internal event-history ovs errors

- show openflow internal event-history ovs events

- show openflow internal mem-stats

- show openflow switch

- show openflow switch flows

- show ospfv3

- show ospfv3 border-routers

- show ospfv3 database

- show ospfv3 database database-summary

- show ospfv3 database detail

- show ospfv3 event-history

- show ospfv3 event-history detail

- show ospfv3 ha

- show ospfv3 interface

- show ospfv3 interface brief

- show ospfv3 internal

- show ospfv3 internal ha

- show ospfv3 internal library-info

- show ospfv3 internal mem-stats

- show ospfv3 lsa-content-changed-list

- show ospfv3 memory

- show ospfv3 neighbors

- show ospfv3 neighbors detail

- show ospfv3 neighbors summary

- show ospfv3 policy statistics

- show ospfv3 request-list

- show ospfv3 retransmission-list

- show ospfv3 route

- show ospfv3 route summary

- show ospfv3 statistics

- show ospfv3 summary-address

- show ospfv3 traffic

- show ospfv3 virtual-links

- show ospfv3 virtual-links brief

- show otv

- show otv adjacency

- show otv arp-nd-cache

- show otv data-group

- show otv internal

- show otv internal

- show otv internal

- show otv internal

- show otv internal adjacency-server replication-list

- show otv internal aed-server

- show otv internal blackholing state

- show otv internal cleanup

- show otv internal event-history

- show otv internal mem-stats

- show otv internal overlay history

- show otv internal peer-id allocation

- show otv internal pim-cache

- show otv internal replication-list sdb

- show otv internal shared-database

- show otv internal snmp cotvAdjacencyDatabaseTable cotvOverlayNumber cotvAdjacentDevAddrType cotvAdjacentDevAddr

- show otv internal snmp cotvArpNdCacheTable cotvOverlayNumber cotvVlanId cotvArpNdCacheL3AddrType cotvArpNdCacheL3Addr

- show otv internal snmp cotvDataGroupConfigTable overlay mcasttype mcastaddr prefixlen

- show otv internal snmp cotvDataGroupInfoTable overlay location

- show otv internal snmp cotvOverlayTable cotvOverlayNumber

- show otv internal snmp cotvVlansTable overlay vlan

- show otv internal snmp global cotvSiteIdAdmin

- show otv internal snmp global cotvSiteIdOper

- show otv internal snmp global cotvSiteVlan

- show otv internal snmp global cotvSiteVlanState

- show otv internal state

- show otv internal static-routes unicast

- show otv internal tunnel

- show otv internal ufdm peers

- show otv internal vlan history

- show otv internal vlan state

- show otv isis

- show otv isis active-source

- show otv isis adjacency

- show otv isis aed-svr-req local

- show otv isis csnp

- show otv isis database

- show otv isis ed-summary local

- show otv isis ed-summary remote

- show otv isis event-history

- show otv isis fast-flood

- show otv isis gm-spf-adjacency

- show otv isis hostname

- show otv isis interface

- show otv isis internal library-info

- show otv isis internal mem-stats

- show otv isis internal otv cache

- show otv isis internal packet queue counters

- show otv isis internal perf timer

- show otv isis internal pss

- show otv isis internal vlan

- show otv isis internal vpn tx-members

- show otv isis internal vpn txlist nodes

- show otv isis ip mroute

- show otv isis ip redistribute mroute

- show otv isis lsp free-list

- show otv isis non tlv overflow-list

- show otv isis redistribute route

- show otv isis route-map statistics

- show otv isis route show otv isis route is

- show otv isis rrm

- show otv isis site-index

- show otv isis site

- show otv isis spf-adjacency

- show otv isis spf-log

- show otv isis srm

- show otv isis ssn

- show otv isis statistics

- show otv isis track-adjacency-nexthop

- show otv isis traffic

- show otv isis vlan-status local

- show otv site

- show otv statistics multicast

- show otv vlan-mapping

- show otv vlan

show object-group

show object-group [ <name> ] [ __readonly__ TABLE_ogroup <group_type> <group_name> [ TABLE_seqno <seqno> { <_port_op> <port0_num> | <_port_range> <port1_num> <port2_num> | <hostaddr> | <net_ip> | <mask_ip_addr> <mask_ip_mask> | <hostipv6> | <net_ipv6> | <mask_ipv6_addr> <mask_ipv6_mask> } ] ]

Syntax Description

Syntax Description

show

Show running system information

object-group

Show configured ACL object groups

name

(Optional) object-group name

__readonly__

(Optional)

group_type

(Optional) Object group type

group_name

(Optional) Object group name

seqno

(Optional) Sequence number

TABLE_ogroup

(Optional)

TABLE_seqno

(Optional)

_port_op

(Optional) Port operator

_port_range

(Optional) Port range

port0_num

(Optional) Port number

port1_num

(Optional) Port number

port2_num

(Optional) Port number

net_ip

(Optional) A.B.C.D Network address of object-group member

hostaddr

(Optional) A.B.C.D Host address

mask_ip_addr

(Optional) A.B.C.D IP address

mask_ip_mask

(Optional) A.B.C.D IP address mask

Command Mode

- /exec

show onep

show onep { session { all | <onep-session-id> | rate-limit } [ detail ] } [ __readonly__ [ { TABLE_sessions <ID> <Username> <State> <ReconnectTimer> <ConnectTime> <Appname> <Error> } ] [ { TABLE_details <Appname> <Username> <State> <Error> <ConnectingTime> <ConnectTime> <ReconnectTimer> <ID> <Version> <LastActiveTime> <Keepalive> <TransportName> <HostIP> <HostName> <Pid> [ { TABLE_client_certificate <SerialNumber> <Issuer> [ { TABLE_validity <notBefore> <notAfter> } ] <Subject> <KeyUsage> [ { TABLE_fingerprint <HashType> <HashValue> } ] } ] } ] [ { TABLE_buckets <Addr> <Hash> <Rate> <Last> <Current> <Limit> <ExtendedLimit> <MarkCounter> <Reject> <Accept> } ] ]

Syntax Description

Syntax Description

show

Show running system information

onep

One Platform

session

One Platform session

all

All sessions

onep-session-id

Specific session name

rate-limit

rate limiting feature info

__readonly__

(Optional)

TABLE_sessions

(Optional) all current sessions of onep

ID

(Optional) the session handler

Username

(Optional) the username

State

(Optional) the state

ReconnectTimer

(Optional) the reconnect timer

ConnectTime

(Optional) the connect time

Appname

(Optional) the application name

Error

(Optional) possible error message

TABLE_buckets

(Optional) all rate limit buckets

Addr

(Optional) the remote address

Hash

(Optional) the hash of the remote address

Rate

(Optional) the token fill rate

Last

(Optional) the last rate check time

Current

(Optional) current tokens that are accepted to consume

Limit

(Optional) the standard limit on tokens

ExtendedLimit

(Optional) the burst limit on tokens

MarkCounter

(Optional) the burst tokens to consume

Reject

(Optional) stats: rejected TCP connections

Accept

(Optional) stats: accepted TCP connections

detail

(Optional) Show detailed session info

TABLE_details

(Optional) all current sessions of onep

ID

(Optional) the session handler

Appname

(Optional) the application name

Username

(Optional) the username

State

(Optional) the state

ConnectTime

(Optional) the connected time

ConnectingTime

(Optional) the connecting time

ReconnectTimer

(Optional) the reconnect timer

Version

(Optional) onep version

LastActiveTime

(Optional) last activity time

Keepalive

(Optional) keepalive time

TransportName

(Optional) Transport name

HostIP

(Optional) host address

HostName

(Optional) host name

Pid

(Optional) Pid

TABLE_client_certificate

(Optional) client certificate

SerialNumber

(Optional) Serial Number

Issuer

(Optional) Issuer

TABLE_validity

(Optional) certificate validity

notBefore

(Optional) notBefore

notAfter

(Optional) notAfter

Subject

(Optional) Subject

KeyUsage

(Optional) Key Usage

TABLE_fingerprint

(Optional) certificate finger print

HashType

(Optional) Hash Type

HashValue

(Optional) Hash Value

Command Mode

- /exec

show onep cli-extensions applications

show onep cli-extensions applications [ __readonly__ <num_applications> [ TABLE_applications <app_name> <app_version> <config_domain> <ver_specific> ] ]

Syntax Description

Syntax Description

show

Show running system information

onep

One Platform

cli-extensions

CLI Extensions feature

applications

Onep applications using the CLI Extensions feature

__readonly__

(Optional)

num_applications

(Optional) Number of onep applications

TABLE_applications

(Optional) Table of onep applications

app_name

(Optional) Onep application name

app_version

(Optional) Onep application version

config_domain

(Optional) Onep config domain

ver_specific

(Optional) Onep application version specific

Command Mode

- /exec

show onep error

show onep error [ __readonly__ [ { TABLE_onep_errors <Content> } ] ]

Syntax Description

Syntax Description

show

Show running system information

onep

One Platform

error

Error

__readonly__

(Optional)

TABLE_onep_errors

(Optional) Errors messages

Content

(Optional) error content

Command Mode

- /exec

show onep history

show onep history { { archived } | { all } | { session { all | <onep-session-id> } } } [ __readonly__ [ { TABLE_history <Record> } ] ]

Syntax Description

Syntax Description

show

Show running system information

onep

One Platform

history

One Platform history trails

archived

One Platform archived session

session

One Platform session

onep-session-id

Specific session name

all

All sessions

__readonly__

(Optional)

TABLE_history

(Optional) a set of history records

Record

(Optional) an individual history record

Command Mode

- /exec

show onep internal api statistics

show onep internal api statistics { summary | session { all | <onep-session-id> } } [ include-zero ]

Syntax Description

Syntax Description

show

Show running system information

onep

ONE-P internal show commands

internal

Internal commands

api

Thrift API calls

statistics

Print the ONE-P internal statistics

summary

Print a summary of statistics for all sessions

session

session

all

All current sessions

onep-session-id

Specific session

include-zero

(Optional) Display statistics with zero count

Command Mode

- /exec

show onep internal session-manager

show onep internal session-manager

Syntax Description

Syntax Description

show

Show running system information

onep

One Platform

internal

Commands for internal use

session-manager

Display session-manager internals

Command Mode

- /exec

show onep statistics

show onep statistics [ session { all | <onep-session-id> } ] [ __readonly__ [ { TABLE_stats_global <SessionTotal> <ActiveSessions> <LocalDisconnect> <RemoteDisconnect> <ErrorDisconnect> <TotalDisconnects> <TotalErrors> <AuthenticateErr> <DupAppNameErr> <MemErr> <SystemErr> <TotalConnects> <RejectedConnects> <AcceptedConnects> <UnaffectedConnects> <FailedConnectionIndex> <SequenceNumber> <FailureReason> <ErrorCode> <FailureTime> <RemoteHost> } ] [ { TABLE_stats_sessions <ID> <Appname> <APIIn> <APIOut> <BytesIn> <BytesOut> <VtyCount> <Error> } ] ]

Syntax Description

Syntax Description

show

Show running system information

onep

One Platform

statistics

statistics

session

(Optional) One Platform session

all

(Optional) All sessions

onep-session-id

(Optional) Specific session name

__readonly__

(Optional)

TABLE_stats_global

(Optional) global session statistics for onep

SessionTotal

(Optional) total onep sessions

ActiveSessions

(Optional) currently active onep sessions

LocalDisconnect

(Optional) onep sessions locally disconnected

RemoteDisconnect

(Optional) onep sessions remotely disconnected

ErrorDisconnect

(Optional) onep sessions errored disconnected

TotalDisconnects

(Optional) total onep disconnected sessions

TotalErrors

(Optional) total onep errors

AuthenticateErr

(Optional) onep authentication errors

DupAppNameErr

(Optional) onep duplicate application name errors

MemErr

(Optional) onep memory errors

SystemErr

(Optional) onep system errors

TotalConnects

(Optional) total number of TCP connection attempts

RejectedConnects

(Optional) number of TCP connections rejected by rate limiting

AcceptedConnects

(Optional) number of TCP connections accepted by rate limiting

UnaffectedConnects

(Optional) number of TCP connections unaffected by rate limiting

FailedConnectionIndex

(Optional) Index of the failed connection

SequenceNumber

(Optional) Sequence number of the failed connection

FailureReason

(Optional) Failure reason of the failed connection

ErrorCode

(Optional) Error code of the failed connection

FailureTime

(Optional) Failure time of the failed connection

RemoteHost

(Optional) Remote host address of the failed connection

TABLE_stats_sessions

(Optional) all current sessions of onep

ID

(Optional) the session handler

Appname

(Optional) the application name

APIIn

(Optional) the API in

APIOut

(Optional) the API out

BytesIn

(Optional) the Bytes in

BytesOut

(Optional) the Bytes out

VtyCount

(Optional) the Vty count

Error

(Optional) possible error message

Command Mode

- /exec

show onep status

show onep status [ __readonly__ { operational_status <o_status> } { operational_enable_reason <o_enable_reason> } { operational_version <o_version> } [ { TABLE_transports <transport_name> <status> [ <port> ] [ <access_class> ] [ { TABLE_trustpoints <trustpoint_type> <trustpoint_name> [ { TABLE_trustpoint_hashes <tp_hash_type> <tp_hash_value> } ] } ] } ] { session_max_limit <s_max_limit> } { session_key <enabled> } { cpu_interval <c_interval> } { cpu_fall_threshold <c_fall_threshold> } { cpu_rise_threshold <c_rise_threshold> } { history_buffer_on <h_buffer_on> } { history_buffer_purge <h_buffer_purge> } { history_buffer_size <h_buffer_size> } { history_syslog <h_syslog> } [ { TABLE_service_sets <service_set> <state> [ <enable_mask> ] <version> <accessible_by> } ] ]

Syntax Description

Syntax Description

show

Show running system information

onep

One Platform

status

status

__readonly__

(Optional)

operational_status

(Optional) run-time info about onep

o_status

(Optional) status of onep

operational_enable_reason

(Optional) enable reason if onep is enabled

o_enable_reason

(Optional) if onep is enabled, the enable reason

operational_version

(Optional) run-time version about onep

o_version

(Optional) version of onep

TABLE_transports

(Optional) all transports of onep

transport_name

(Optional) the transport name

status

(Optional) the transport status

port

(Optional) the transport port

access_class

(Optional) the transport access-class

TABLE_trustpoints

(Optional) all trustpoints of the transport

trustpoint_type

(Optional) either Server-Identity or Client-Verification

trustpoint_name

(Optional) the name of the configured trustpoint

TABLE_trustpoint_hashes

(Optional) hashes of a certificate in each trustpoint

tp_hash_type

(Optional) the algorithm used to perform the hash

tp_hash_value

(Optional) the actual hash

session_max_limit

(Optional) maximum number of sessions allowed

s_max_limit

(Optional) maximum limit

session_key

(Optional) session key-required

enabled

(Optional) session key-required

cpu_interval

(Optional) obsevation interval in seconds

c_interval

(Optional) observation interval

cpu_fall_threshold

(Optional) falling threshold in percentage

c_fall_threshold

(Optional) falling threshold

cpu_rise_threshold

(Optional) rising threshold in percentage

c_rise_threshold

(Optional) rising threshold

history_buffer_on

(Optional) history buffer on

h_buffer_on

(Optional) history buffer on

history_buffer_purge

(Optional) history buffer purge

h_buffer_purge

(Optional) purge oldest or newest

history_buffer_size

(Optional) history buffer size

h_buffer_size

(Optional) history buffer size

history_syslog

(Optional) history syslog

h_syslog

(Optional) history syslog

TABLE_service_sets

(Optional) all registered service sets of onep

service_set

(Optional) service set name

state

(Optional) service set state

enable_mask

(Optional) service set enable mask

version

(Optional) service set version

accessible_by

(Optional) service set accessibility

Command Mode

- /exec

show onep trace

show onep trace [ __readonly__ [ { TABLE_onep_traces <Content> } ] ]

Syntax Description

Syntax Description

show

Show running system information

onep

One Platform

trace

Trace

__readonly__

(Optional)

TABLE_onep_traces

(Optional) all internal traces

Content

(Optional) trace content

Command Mode

- /exec

show openflow hardware capabilities

show openflow hardware capabilities [ pipeline <pipeline-id> ]

Syntax Description

Syntax Description

show

Show running system information

openflow

Show OpenFlow information

hardware

Hardware

capabilities

Capabilities

pipeline

(Optional) Pipeline id

pipeline-id

(Optional) Pipeline id

Command Mode

- /exec

show openflow internal

show openflow internal { counters { mts | arp { [ interface <ifname> ] | statsdb } } | topology | plifnxos counters | pktflowdb | timestamp }

Syntax Description

Syntax Description

show

Show running system information

openflow

Show OpenFlow information

internal

Commands for internal use

counters

Info about internal counters

mts

MTS send and receive stats

topology

Info about the topologies

plifnxos

Info about the L2RIB flow mods counters

pktflowdb

Dump the flow db from the packets

timestamp

Timestamp for all the controller to switch messages

arp

Info about the ARP packet counters

interface

(Optional) Interface

ifname

(Optional) Interface name

statsdb

Dump the ARP stats database

Command Mode

- /exec

show openflow internal event-history errors

show openflow internal event-history errors

Syntax Description

Syntax Description

show

Show running system information

openflow

Show OpenFlow information

internal

Commands for internal use

event-history

Show event history of OpenFlow

errors

Show error history of OpenFlow

Command Mode

- /exec

show openflow internal event-history events

show openflow internal event-history events

Syntax Description

Syntax Description

show

Show running system information

openflow

Show OpenFlow information

internal

Commands for internal use

event-history

Show event history of OpenFlow

events

Show event history of OpenFlow

Command Mode

- /exec

show openflow internal event-history mts

show openflow internal event-history mts

Syntax Description

Syntax Description

show

Show running system information

openflow

Show OpenFlow information

internal

Commands for internal use

event-history

Show event history of OpenFlow

mts

Show MTS message history of OpenFlow

Command Mode

- /exec

show openflow internal event-history ovs errors

show openflow internal event-history ovs errors

Syntax Description

Syntax Description

show

Show running system information

openflow

Show OpenFlow information

internal

Commands for internal use

event-history

Show event history of OpenFlow

ovs

Openvswitch

errors

Show error history of OpenFlow

Command Mode

- /exec

show openflow internal event-history ovs events

show openflow internal event-history ovs events

Syntax Description

Syntax Description

show

Show running system information

openflow

Show OpenFlow information

internal

Commands for internal use

event-history

Show event history of OpenFlow

ovs

Openvswitch

events

Show event history of OpenFlow

Command Mode

- /exec

show openflow internal mem-stats

show openflow internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

openflow

Show OpenFlow information

internal

Commands for internal use

mem-stats

Show memory allocation statistics

detail

(Optional) Display detailed information

Command Mode

- /exec

show openflow switch

show openflow switch <switch-id> [ { controllers [ stats | { role { master | slave | equal } } ] | ports } ] [ __readonly__ <cli_output> <ctrlv4> <ctrlport> ]

Syntax Description

Syntax Description

show

Show running system information

openflow

Show OpenFlow information

switch

Logical switch id

switch-id

Logical switch-id to enter

controllers

(Optional) Controllers

stats

(Optional) Stats

ports

(Optional) Ports

role

(Optional) Controller role

master

(Optional) Master

slave

(Optional) Slave

equal

(Optional) Equal

__readonly__

(Optional)

cli_output

(Optional)

ctrlv4

(Optional)

ctrlport

(Optional)

Command Mode

- /exec

show openflow switch flows

show openflow switch <switch-id> flows [ [ table-id <table-id> ] [ [ pending | pending-del | controller | configured | default | fixed ] [ brief | summary ] ] | stats ]

Syntax Description

Syntax Description

show

Show running system information

openflow

Show OpenFlow information

switch

Logical switch id

switch-id

Logical switch-id to enter

flows

Flows

brief

(Optional) Brief

summary

(Optional) Summary

pending

(Optional) Pending

pending-del

(Optional) Pending delete

controller

(Optional) Controller

configured

(Optional) Configured

default

(Optional) Default

fixed

(Optional) Fixed

stats

(Optional) Stats

table-id

(Optional) Table-id for the pipeline

table-id

(Optional) Table ID

Command Mode

- /exec

show ospfv3

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <instance_number> <cname> <rid> <stateful_ha> <gr_ha> [ [ <gr_planned_only> ] [ <gr_notify_period> ] [ <gr_grace_period> ] [ <gr_state> ] [ <gr_last_status> ] ] [ <gr_helper_mode> ] <support_tos0_only> <support_opaque_lsa> [ <low_mem_cond> ] <is_abr> <is_asbr> [ <max_lsa_non_self_number> ] [ <max_lsa_state> ] [ <max_lsa_warning_only> ] [ <max_lsa_current_non_self_lsa_number> ] [ <max_lsa_threshold_pct> ] [ <max_lsa_ignore_time> ] [ <max_lsa_reset_time> ] [ <max_lsa_ignore_count> ] [ <max_lsa_current_ignore_count> ] [ <max_lsa_ignore_time_left> ] [ <max_lsa_reset_time_left> ] [ <max_lsa_permanent_ignore> ] [ <ipsec_sa_type> ] [ <ipsec_sa_algorithm> ] [ <ipsec_sa_spi> ] [ { TABLE_redist <proto> [ <max_lsas> ] [ <warning> ] [ <threshold> ] [ <current_count> ] } ] <admin_dist> <ref_bw> <spf_start_time> <spf_hold_time> <spf_max_time> <lsa_start_time> <lsa_hold_time> <lsa_max_time> <min_lsa_arr_time> <lsa_aging_pace> <spf_max_paths> <max_metric_adver> [ [ <max_metric_time_left> ] [ <max_metric_wait_bgp> ] [ <max_metric_timeout> ] [ <max_metric_always> ] [ <max_metric_sum_lsa> ] [ <max_metric_ext_lsa> ] ] <asext_lsa_cnt> <asext_lsa_crc> <area_total> <area_normal> <area_stub> <area_nssa> <act_area_total> <act_area_normal> <act_area_stub> <act_area_nssa> <no_discard_rt_ext> <no_discard_rt_int> [ <bfd_enabled> ] [ <passive_dflt> ] [ <name_lookup> ] [ { TABLE_area <aname> [ <backbone_active> ] [ <active> ] <age> <total_intf> <act_intf> <passive_intf> <loopback_intf> [ <gr_nbr_cnt> ] <stub> [ <stub_def_cost> ] <nssa> [ <no_redist> ] [ <nssa_trans> ] <no_summary> <spf_runs> <last_spf_run_time> [ <rtr_lsa_throt> ] [ <ipsec_sa_type> ] [ <ipsec_sa_algorithm> ] [ <ipsec_sa_spi> ] [ TABLE_range <addr> <masklen> <state> <nets> <advertise> [ <cost> ] ] [ <filter_in> ] [ <filter_out> ] <lsa_cnt> <lsa_crc> } ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

instance_number

(Optional)

cname

(Optional)

rid

(Optional)

stateful_ha

(Optional)

gr_ha

(Optional)

gr_planned_only

(Optional)

gr_notify_period

(Optional)

gr_grace_period

(Optional)

gr_state

(Optional)

gr_last_status

(Optional)

gr_helper_mode

(Optional)

support_tos0_only

(Optional)

support_opaque_lsa

(Optional)

low_mem_cond

(Optional)

is_abr

(Optional)

is_asbr

(Optional)

max_lsa_non_self_number

(Optional)

max_lsa_state

(Optional)

max_lsa_warning_only

(Optional)

max_lsa_current_non_self_lsa_number

(Optional)

max_lsa_threshold_pct

(Optional)

max_lsa_ignore_time

(Optional)

max_lsa_reset_time

(Optional)

max_lsa_ignore_count

(Optional)

max_lsa_current_ignore_count

(Optional)

max_lsa_ignore_time_left

(Optional)

max_lsa_reset_time_left

(Optional)

max_lsa_permanent_ignore

(Optional)

ipsec_sa_type

(Optional) IPsec SA Type

ipsec_sa_algorithm

(Optional) IPsec SA Algorithm name

ipsec_sa_spi

(Optional) IPsec SA SPI Value

TABLE_redist

(Optional)

proto

(Optional)

max_lsas

(Optional)

warning

(Optional)

threshold

(Optional)

current_count

(Optional)

admin_dist

(Optional)

ref_bw

(Optional)

spf_start_time

(Optional)

spf_hold_time

(Optional)

spf_max_time

(Optional)

lsa_start_time

(Optional)

lsa_hold_time

(Optional)

lsa_max_time

(Optional)

min_lsa_arr_time

(Optional)

lsa_aging_pace

(Optional)

spf_max_paths

(Optional)

max_metric_adver

(Optional)

max_metric_time_left

(Optional)

max_metric_wait_bgp

(Optional)

max_metric_timeout

(Optional)

max_metric_always

(Optional)

max_metric_sum_lsa

(Optional)

max_metric_ext_lsa

(Optional)

asext_lsa_cnt

(Optional)

asext_lsa_crc

(Optional)

area_total

(Optional)

area_normal

(Optional)

area_stub

(Optional)

area_nssa

(Optional)

act_area_total

(Optional)

act_area_normal

(Optional)

act_area_stub

(Optional)

act_area_nssa

(Optional)

bfd_enabled

(Optional)

passive_dflt

(Optional)

name_lookup

(Optional)

no_discard_rt_ext

(Optional)

no_discard_rt_int

(Optional)

TABLE_area

(Optional)

aname

(Optional)

backbone_active

(Optional)

active

(Optional)

age

(Optional)

total_intf

(Optional)

act_intf

(Optional)

passive_intf

(Optional)

loopback_intf

(Optional)

gr_nbr_cnt

(Optional)

stub

(Optional)

stub_def_cost

(Optional)

nssa

(Optional)

no_redist

(Optional)

nssa_trans

(Optional)

no_summary

(Optional)

spf_runs

(Optional)

last_spf_run_time

(Optional)

rtr_lsa_throt

(Optional)

ipsec_sa_type

(Optional) IPsec SA Type

ipsec_sa_algorithm

(Optional) IPsec SA Algorithm name

ipsec_sa_spi

(Optional) IPsec SA SPI Value

TABLE_range

(Optional)

masklen

(Optional)

state

(Optional)

nets

(Optional)

advertise

(Optional)

cost

(Optional)

filter_in

(Optional)

filter_out

(Optional)

lsa_cnt

(Optional)

lsa_crc

(Optional)

Command Mode

- /exec

show ospfv3 border-routers

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] border-routers [ all_routes ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_br <type> <addr> <cost> <asbr> <abr> <area> <spf_inst> [ <vlink_unresolved> ] [ TABLE_br_ubest_nh [ <ubest_nh_addr> ] [ <ubest_nh_intf> ] ] [ TABLE_br_mbest_nh [ <mbest_nh_addr> ] [ <mbest_nh_intf> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

border-routers

Border routers

all_routes

(Optional) Display all OSPFv3 routes

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_br

(Optional)

type

(Optional)

addr

(Optional)

cost

(Optional)

asbr

(Optional)

abr

(Optional)

area

(Optional)

spf_inst

(Optional)

vlink_unresolved

(Optional)

TABLE_br_ubest_nh

(Optional)

ubest_nh_intf

(Optional)

TABLE_br_mbest_nh

(Optional)

mbest_nh_intf

(Optional)

Command Mode

- /exec

show ospfv3 database

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] database [ [ [ [ router | network | intra-area-prefix | inter-area { irouter | iprefix } | nssa-external | area-unknown | [ [ { link | link-unknown | grace } [ <interface> ] ] ] ] [ area <area-id-ip> ] ] | external [ tag <tag_val> ] | as-unknown ] [ <lsid> ] [ self-originated | adv-router <advid> | adv-router-name <adv-name> ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <rid> <ptag> <cname> [ TABLE_db3_lsa [ <name> ] [ <area> ] [ <id> ] [ <advrtr> ] [ <age> ] [ <seqno> ] [ <corrupt> ] [ <rtr_num_links> ] [ <net_num_rtr> ] [ <prefix> ] [ <inter_rid> ] [ <link_if> ] [ <intra_ref_type> ] [ <intra_ref_lsid> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

database

Link-state Database Summary

router

(Optional) Display router LSAs

network

(Optional) Display network LSAs

inter-area

(Optional) Display inter-area LSAs

iprefix

(Optional) Display Inter-Area-Prefix LSAs

irouter

(Optional) Display Inter-Area-Router LSAs

nssa-external

(Optional) Display NSSA-external LSAs

area-unknown

(Optional) Display area-scope unknown LSAs

external

(Optional) Display AS-external LSAs

as-unknown

(Optional) Display as-scope unknown LSAs

grace

(Optional) Display Grace LSAs

link

(Optional) Display Link LSAs

link-unknown

(Optional) Display link-scope unknown LSAs

interface

(Optional) OSPF enabled interface

intra-area-prefix

(Optional) Display Intra-Area-Prefix LSAs

self-originated

(Optional) Display only self-originated LSAs

lsid

(Optional) Restrict display by link state ID

adv-router

(Optional) Restrict display by Advertising router

advid

(Optional) Advertising router ID

adv-router-name

(Optional) Restrict display by Advertising router name

adv-name

(Optional) DNS Name of the Advertising router

area

(Optional) Display only LSA's in this area

area-id-ip

(Optional) Area Id as an integer or ip address

tag

(Optional) Restrict display by tag

tag_val

(Optional) 32-bit tag value

__readonly__

(Optional)

TABLE_ctx

(Optional)

rid

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_db3_lsa

(Optional)

name

(Optional)

area

(Optional)

id

(Optional)

advrtr

(Optional)

age

(Optional)

seqno

(Optional)

corrupt

(Optional)

rtr_num_links

(Optional)

net_num_rtr

(Optional)

inter_rid

(Optional)

link_if

(Optional)

intra_ref_type

(Optional)

intra_ref_lsid

(Optional)

Command Mode

- /exec

show ospfv3 database database-summary

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] database database-summary [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <rid> <ptag> <cname> [ TABLE_dbsum [ TABLE_dbsum_area <area> [ TABLE_dbsum_area_lsa <area_lsa_name> <area_lsa_count> ] <area_lsa_total> ] [ TABLE_dbsum_all [ TABLE_dbsum_lsa_all <lsa_name> <lsa_count> ] <non_self_lsa_total> <lsa_total> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

database

Link-state Database Summary

database-summary

Summary of database

__readonly__

(Optional)

TABLE_ctx

(Optional)

rid

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_dbsum

(Optional)

TABLE_dbsum_area

(Optional)

area

(Optional)

TABLE_dbsum_area_lsa

(Optional)

area_lsa_name

(Optional)

area_lsa_count

(Optional)

area_lsa_total

(Optional)

TABLE_dbsum_all

(Optional)

TABLE_dbsum_lsa_all

(Optional)

lsa_name

(Optional)

lsa_count

(Optional)

non_self_lsa_total

(Optional)

lsa_total

(Optional)

Command Mode

- /exec

show ospfv3 database detail

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] database [ [ [ router | network | intra-area-prefix | inter-area { irouter | iprefix } | nssa-external | area-unknown | [ [ { link | link-unknown | grace } [ <interface> ] ] ] ] [ area <area-id-ip> ] ] | external [ tag <tag_val> ] | as-unknown ] [ <lsid> ] [ self-originated | adv-router <advid> | adv-router-name <adv-name> ] detail [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <rid> <ptag> <cname> [ TABLE_db3_lsa [ <name> ] [ <area> ] [ TABLE_lsdb <age> <maxage> <wrapping> <dummy> <flush_pending> <type> [ <intf> ] <id> <advrtr> <seqno> <cksum> <len> [ <corrupt> ] [ <rtr_abr> ] [ <rtr_asbr> ] [ <rtr_translate> ] [ <rtr_vlink_end> ] [ <rtr_options> ] [ <rtr_num_links> ] [ TABLE_rlsa [ <rtr_link_type> ] [ <rtr_link_metric> ] [ <rtr_link_ifid> ] [ <rtr_link_nbr_ifid> ] [ <rtr_link_nbr_rid> ] ] [ <net_options> ] [ TABLE_nlsa [ <net_rtr> ] ] [ <ia_prefix> ] [ <ia_prefix_options> ] [ <ia_prefix_metric> ] [ <ia_rtr_options> ] [ <ia_rtr_metric> ] [ <ia_rtr_rid> ] [ <asext_prefix> ] [ <asext_options> ] [ <asext_metric_type2> ] [ <asext_metric> ] [ <asext_fwd_addr> ] [ <asext_tag> ] [ <asext_ref_lstype> ] [ <asext_ref_lsid> ] [ <link_priority> ] [ <link_options> ] [ <link_laddr> ] [ <link_num_prefix> ] [ TABLE_linklsa [ <link_prefix> ] [ <link_prefix_options> ] ] [ <intra_num_prefix> ] [ <intra_ref_lstype> ] [ <intra_ref_lsid> ] [ <intra_ref_advrtr> ] [ TABLE_iaplsa [ <intra_prefix> ] [ <intra_prefix_options> ] [ <intra_prefix_metric> ] [ <corrupted_length> ] ] [ <tlv_type> ] [ <tlv_len> ] [ <tlv_data> ] [ <tlv_unknown> ] [ <gr_interval> ] [ <gr_reason> ] [ <unknown> ] [ <data_len> ] [ <data> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

database

Link-state Database Summary

router

(Optional) Display router LSAs

network

(Optional) Display network LSAs

inter-area

(Optional) Display inter-area LSAs

iprefix

(Optional) Display Inter-Area-Prefix LSAs

irouter

(Optional) Display Inter-Area-Router LSAs

nssa-external

(Optional) Display NSSA-external LSAs

area-unknown

(Optional) Display area-scope unknown LSAs

external

(Optional) Display AS-external LSAs

as-unknown

(Optional) Display as-scope unknown LSAs

grace

(Optional) Display Grace LSAs

link

(Optional) Display Link LSAs

link-unknown

(Optional) Display link-scope unknown LSAs

interface

(Optional) OSPF enabled interface

intra-area-prefix

(Optional) Display Intra-Area-Prefix LSAs

self-originated

(Optional) Display only self-originated LSAs

lsid

(Optional) Restrict display by link state ID

adv-router

(Optional) Restrict display by Advertising router

advid

(Optional) Advertising router ID

adv-router-name

(Optional) Restrict display by Advertising router name

adv-name

(Optional) DNS Name of the Advertising router

area

(Optional) Display only LSA's in this area

area-id-ip

(Optional) Area Id as an integer or ip address

tag

(Optional) Restrict display by tag

tag_val

(Optional) 32-bit tag value

detail

Display LSA in detail

__readonly__

(Optional)

TABLE_ctx

(Optional)

rid

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_db3_lsa

(Optional)

name

(Optional)

area

(Optional)

TABLE_lsdb

(Optional)

age

(Optional)

maxage

(Optional)

wrapping

(Optional)

dummy

(Optional)

flush_pending

(Optional)

type

(Optional)

intf

(Optional)

id

(Optional)

advrtr

(Optional)

seqno

(Optional)

cksum

(Optional)

len

(Optional)

corrupt

(Optional)

rtr_abr

(Optional)

rtr_asbr

(Optional)

rtr_translate

(Optional)

rtr_vlink_end

(Optional)

rtr_options

(Optional)

rtr_num_links

(Optional)

TABLE_rlsa

(Optional)

rtr_link_type

(Optional)

rtr_link_metric

(Optional)

rtr_link_ifid

(Optional)

rtr_link_nbr_ifid

(Optional)

rtr_link_nbr_rid

(Optional)

net_options

(Optional)

TABLE_nlsa

(Optional)

net_rtr

(Optional)

ia_prefix_options

(Optional)

ia_prefix_metric

(Optional)

ia_rtr_options

(Optional)

ia_rtr_metric

(Optional)

ia_rtr_rid

(Optional)

asext_options

(Optional)

asext_metric_type2

(Optional)

asext_metric

(Optional)

asext_tag

(Optional)

asext_ref_lstype

(Optional)

asext_ref_lsid

(Optional)

link_priority

(Optional)

link_options

(Optional)

link_num_prefix

(Optional)

TABLE_linklsa

(Optional)

link_prefix_options

(Optional)

intra_num_prefix

(Optional)

intra_ref_lstype

(Optional)

intra_ref_lsid

(Optional)

intra_ref_advrtr

(Optional)

TABLE_iaplsa

(Optional)

intra_prefix_options

(Optional)

intra_prefix_metric

(Optional)

corrupted_length

(Optional)

tlv_type

(Optional)

tlv_len

(Optional)

tlv_data

(Optional)

tlv_unknown

(Optional)

gr_interval

(Optional)

gr_reason

(Optional)

unknown

(Optional)

data_len

(Optional)

data

(Optional)

Command Mode

- /exec

show ospfv3 event-history

show ospfv3 [ <tag> ] [ internal ] event-history { errors | msgs | statistics | adjacency | event | ha | flooding | lsa | spf | redistribution | hello | spf-trigger | cli | rib }

Syntax Description

Syntax Description

show

Show running system information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

internal

(Optional) Commands for internal use

event-history

Show various event logs of OSPF

errors

Error logs

msgs

IPC logs

statistics

Show the state and size of the buffers

adjacency

Adjacency formation logs

event

Internal event logs

ha

HA and GR logs

flooding

LSA flooding logs

lsa

LSA generation and databse logs

spf

SPF calculation logs

redistribution

Redistribution logs

hello

Hello related logs

spf-trigger

SPF TRIGGER related logs

cli

Cli logs

rib

RIB related logs

Command Mode

- /exec

show ospfv3 event-history detail

show ospfv3 [ <tag> ] [ internal ] event-history detail [ statistics ]

Syntax Description

Syntax Description

show

Show running system information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

internal

(Optional) Commands for internal use

event-history

Show event history of OSPF

detail

Show detailed event history information

statistics

(Optional) Show the state and size of the verbose history buffer

Command Mode

- /exec

show ospfv3 ha

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] ha [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> <stateful> <pss_restored> <pss_state> <gr_enabled> <gr_grace_period> <gr_state> <gr_last_status> <gr_helper_mode> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

ha

High Availability status

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

stateful

(Optional)

pss_restored

(Optional)

pss_state

(Optional)

gr_enabled

(Optional)

gr_grace_period

(Optional)

gr_state

(Optional)

gr_last_status

(Optional)

gr_helper_mode

(Optional)

Command Mode

- /exec

show ospfv3 interface

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] interface [ <interface> | vrf { <vrf-name> | <vrf-known-name> | all } ] [ private ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_intf <ifname> <admin_status> <proto_status> <addr> [ <masklen> ] [ <inst_id> ] <area> [ <if_cfg> ] <state_str> <type_str> <cost> [ <bfd_enabled> ] <index> [ <passive> ] [ <mpls> ] [ <transmit_delay> ] [ <if_priority> ] [ <dr_rid> ] [ <dr_addr> ] [ <bdr_rid> ] [ <bdr_addr> ] [ <nbr_total> ] [ <nbr_flood> ] [ <nbr_adjs> ] [ <gr_nbr> ] [ <hello_interval> ] [ <dead_interval> ] [ <wait_interval> ] [ <rxmt_interval> ] [ <hello_timer> ] [ <wait_timer> ] [ <pacing_timer> ] [ <lsu_timer> ] [ <lsack_timer> ] [ <netlsa_throt_timer> ] [ <link_lsa_cnt> ] [ <link_lsa_crc> ] [ <ipsec_sa_type> ] [ <ipsec_sa_algorithm> ] [ <ipsec_sa_spi> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

interface

OSPF enabled interface

interface

(Optional) OSPF enabled interface

private

(Optional) Developer-only statistics

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_intf

(Optional)

ifname

(Optional)

admin_status

(Optional)

proto_status

(Optional)

masklen

(Optional)

inst_id

(Optional)

area

(Optional)

if_cfg

(Optional)

state_str

(Optional)

type_str

(Optional)

cost

(Optional)

bfd_enabled

(Optional)

index

(Optional)

passive

(Optional)

mpls

(Optional)

transmit_delay

(Optional)

if_priority

(Optional)

dr_rid

(Optional)

bdr_rid

(Optional)

nbr_total

(Optional)

nbr_flood

(Optional)

nbr_adjs

(Optional)

gr_nbr

(Optional)

hello_interval

(Optional)

dead_interval

(Optional)

wait_interval

(Optional)

rxmt_interval

(Optional)

hello_timer

(Optional)

wait_timer

(Optional)

pacing_timer

(Optional)

lsu_timer

(Optional)

lsack_timer

(Optional)

netlsa_throt_timer

(Optional)

link_lsa_cnt

(Optional)

link_lsa_crc

(Optional)

ipsec_sa_type

(Optional) IPsec SA Type

ipsec_sa_algorithm

(Optional) IPsec SA Algorithm name

ipsec_sa_spi

(Optional) IPsec SA SPI Value

Command Mode

- /exec

show ospfv3 interface brief

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] interface brief [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> <intf_count> TABLE_intf <ifname> <index> <area> <cost> <state_str> <nbr_total> <admin_status> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

interface

OSPF enabled interface

brief

Display summary of OSPFv3 interfaces

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

intf_count

(Optional)

TABLE_intf

(Optional)

ifname

(Optional)

index

(Optional)

area

(Optional)

cost

(Optional)

state_str

(Optional)

nbr_total

(Optional)

admin_status

(Optional)

Command Mode

- /exec

show ospfv3 internal

show ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] internal [ errors ] [ area <area-id-ip> ] [ table-map ] [ asbrs [ all_routes ] ] [ externals ] [ as-external-routes ] [ max-metric ] [ flood-indices ] [ if-number-tree ] [ max-lsa ] [ txlist { u6rib | inter-prefix | inter-router | as-external | throttle } ] [ lsa <area-id2-ip> <lstype> <lsid> <advrtr> [ <interface> ] ] [ area-list [ <area-list-num> ] ] [ interface-list [ <if-list-num> ] ] [ nbr-list [ <nbr-list-num> ] ] [ as-definfo-originate ] [ clear-ipv6-rt-queue ] [ flood-queue-drops ] [ forwarding-address ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

internal

Commands for internal use

errors

(Optional) Error counters

area

(Optional) OSPF Area information

area-id-ip

(Optional) Area Id as an integer or ip address

table-map

(Optional) Show table-map policy details and statistics

asbrs

(Optional) OSPF ASBR information

all_routes

(Optional) Display all OSPFv3 routes

externals

(Optional) OSPF External LSAs information

max-metric

(Optional) max metric related flags and values

flood-indices

(Optional) OSPF Flood index usage for neighbors and interfaces

if-number-tree

(Optional) Patricia Tree of OSPF interfaces indexed by iod

txlist

(Optional) Show txlist

u6rib

(Optional) Show txlist of IPv6 routes sent/pending for U6RIB

inter-prefix

(Optional) Routes having contribution from inter-area-prefix LSA

inter-router

(Optional) Routes having contribution from inter-area-router LSA

as-external

(Optional) Routes having contribution from as-external LSA

throttle

(Optional) Show self originated LSA throttle list

lsa

(Optional) OSPF LSA information

max-lsa

(Optional) Show max-lsa feature details and statistics

as-definfo-originate

(Optional) Show type-5 default-information originate state

flood-queue-drops

(Optional) Show statistics related to drops when packets are enqueued on flood queue

forwarding-address

(Optional) Show the forwarding addresses PT in this vrf

area-id2-ip

(Optional) Area Id as an integer or ip address

lstype

(Optional) Link state type of LSA

lsid

(Optional) Link state ID of LSA

advrtr

(Optional) Advertising router of LSA

interface

(Optional) OSPF enabled interface

area-list

(Optional) Show area list

area-list-num

(Optional) Area list number

interface-list

(Optional) Show interface list

if-list-num

(Optional) Interface list number

nbr-list

(Optional) Show neighbor list

nbr-list-num

(Optional) Neighbor list number

as-external-routes

(Optional) Display the external routes in external redist PT

clear-ipv6-rt-queue

(Optional) Show the internal clear IPv6 route queue

Command Mode

- /exec

show ospfv3 internal ha

show ospfv3 [ <tag> ] internal ha [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

internal

Commands for internal use

ha

HA related information

Command Mode

- /exec

show ospfv3 internal library-info

show ospfv3 [ <tag> ] internal library-info

Syntax Description

Syntax Description

show

Show running system information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

internal

Commands for internal use

library-info

Show various event logs of library

Command Mode

- /exec

show ospfv3 internal mem-stats

show ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] internal mem-stats [ no-libs ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

internal

Commands for internal use

mem-stats

Show memory allocation statistics

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

Command Mode

- /exec

show ospfv3 lsa-content-changed-list

show [ ipv6 ] ospfv3 [ <tag> ] lsa-content-changed-list { <ip-addr> | <neighbor-name> } <interface> [ __readonly__ [ TABLE_ctx <ptag> <cname> [ TABLE_lschg <nbr_rid> <intf> <nbr_addr> [ TABLE_lsa [ <type> ] [ <lsid> ] [ <advrtr> ] [ <seqno> ] [ <cksum> ] [ <age> ] ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

lsa-content-changed-list

LSAs that changed contents

interface

OSPF enabled interface

ip-addr

Neighbor router ID

neighbor-name

DNS Name of the neighbor

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_lschg

(Optional)

nbr_rid

(Optional)

intf

(Optional)

TABLE_lsa

(Optional)

type

(Optional)

lsid

(Optional)

advrtr

(Optional)

seqno

(Optional)

cksum

(Optional)

age

(Optional)

Command Mode

- /exec

show ospfv3 memory

show [ ipv6 ] ospfv3 [ <tag> ] memory [ __readonly__ TABLE_mem <ptag> <byte_total> <byte_consumed> <byte_overhead> <byte_allocated> <alloc_current> <alloc_created> <alloc_failed> <alloc_free> <bf_current> <bf_created> <bf_failed> <bf_free> <bf_byte_consumed> <bf_32_current> <bf_32_created> <bf_32_failed> <bf_32_free> <bf_32_byte_consumed> <slab_current> <slab_created> <slab_failed> <slab_free> <slab_byte_consumed> <if_index_alloc_failed> <nbr_index_alloc_failed> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

memory

Memory usage statistics

__readonly__

(Optional)

TABLE_mem

(Optional)

ptag

(Optional)

byte_total

(Optional)

byte_consumed

(Optional)

byte_overhead

(Optional)

byte_allocated

(Optional)

alloc_current

(Optional)

alloc_created

(Optional)

alloc_failed

(Optional)

alloc_free

(Optional)

bf_current

(Optional)

bf_created

(Optional)

bf_failed

(Optional)

bf_free

(Optional)

bf_byte_consumed

(Optional)

bf_32_current

(Optional)

bf_32_created

(Optional)

bf_32_failed

(Optional)

bf_32_free

(Optional)

bf_32_byte_consumed

(Optional)

slab_current

(Optional)

slab_created

(Optional)

slab_failed

(Optional)

slab_free

(Optional)

slab_byte_consumed

(Optional)

if_index_alloc_failed

(Optional)

nbr_index_alloc_failed

(Optional)

Command Mode

- /exec

show ospfv3 neighbors

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] neighbors [ { { <interface> [ <neighbor> | <neighbor-name> ] } | { [ <neighbor> | <neighbor-name> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } } ] [ __readonly__ TABLE_ctx <ptag> <cname> <nbrcount> [ TABLE_nbr <rid> <priority> <state> <drstate> <uptime> <ifid> <intf> [ <multiarea> ] <addr> ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

neighbors

Neighbor list

interface

(Optional) OSPF enabled interface

neighbor

(Optional) Router ID of neighbor

neighbor-name

(Optional) DNS Name of the neighbor

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

nbrcount

(Optional)

TABLE_nbr

(Optional)

rid

(Optional)

priority

(Optional)

state

(Optional)

drstate

(Optional)

uptime

(Optional)

ifid

(Optional)

intf

(Optional)

multiarea

(Optional)

Command Mode

- /exec

show ospfv3 neighbors detail

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] neighbors [ <interface> ] [ <neighbor> ] detail [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ private ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_nbr <rid> <addr> <area> <intf> <state> <transition> <lastchange> [ <bfd_state> ] [ <priority> ] [ <ifid> ] [ <dr> ] [ <bdr> ] [ <master> ] [ <seqno> ] [ <dbdallsentacked> ] [ <dbdallsent> ] [ <dbdallacked> ] [ <lsaonreqlist> ] [ <lsafromlastreq> ] [ <lsreqrxmts> ] <helloptions> <dbdoptions> <lastnonhello> [ <deadtimer> ] [ <pacingtimer> ] [ <dbdrxmtimer> ] [ <reqrxmtimer> ] [ <lsutimer> ] [ <rerxmtimer> ] [ <fastrerxmtimer> ] [ <lsacktimer> ] [ <grtimer> ] [ <helpermode> ] [ <helpercand> ] [ <helperterm> ] [ <senddbd> ] [ <sendlsreq> ] [ <sendlsu> ] [ <sendlsurxmt> ] [ <sendlsack> ] [ <sendlsreqreply> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

neighbors

Neighbor list

interface

(Optional) OSPF enabled interface

neighbor

(Optional) Router ID of neighbor

detail

Show detailed neighbor display

private

(Optional) Developer-only statistics

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_nbr

(Optional)

rid

(Optional)

area

(Optional)

intf

(Optional)

state

(Optional)

transition

(Optional)

lastchange

(Optional)

bfd_state

(Optional)

priority

(Optional)

ifid

(Optional)

dr

(Optional)

bdr

(Optional)

master

(Optional)

seqno

(Optional)

dbdallsentacked

(Optional)

dbdallsent

(Optional)

dbdallacked

(Optional)

lsaonreqlist

(Optional)

lsafromlastreq

(Optional)

lsreqrxmts

(Optional)

helloptions

(Optional)

dbdoptions

(Optional)

lastnonhello

(Optional)

deadtimer

(Optional)

pacingtimer

(Optional)

dbdrxmtimer

(Optional)

reqrxmtimer

(Optional)

lsutimer

(Optional)

rerxmtimer

(Optional)

fastrerxmtimer

(Optional)

lsacktimer

(Optional)

grtimer

(Optional)

helpermode

(Optional)

helpercand

(Optional)

helperterm

(Optional)

senddbd

(Optional)

sendlsreq

(Optional)

sendlsu

(Optional)

sendlsurxmt

(Optional)

sendlsack

(Optional)

sendlsreqreply

(Optional)

Command Mode

- /exec

show ospfv3 neighbors summary

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] neighbors [ <interface> ] summary [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> TABLE_intf { <ifname> | <total> } <down> <attempt> <init> <twoway> <exstart> <exchange> <loading> <full> <if_total> ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

neighbors

Neighbor list

interface

(Optional) OSPF enabled interface

summary

Summary of neighbors

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_intf

(Optional)

ifname

(Optional)

total

(Optional)

down

(Optional)

attempt

(Optional)

init

(Optional)

twoway

(Optional)

exstart

(Optional)

exchange

(Optional)

loading

(Optional)

full

(Optional)

if_total

(Optional)

Command Mode

- /exec

show ospfv3 policy statistics

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] policy statistics { { redistribute { bgp <as> | { isis | rip } <tag> | static | direct | amt } } | { area <area-id-ip> filter-list { in | out } } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

policy

Display Policy related information

statistics

Display Route Filter statistics

redistribute

Statistics for redistribution

rip

Routing Information Protocol (RIP)

isis

ISO Intermediate-to-Intermediate (IS-IS)

bgp

Border Gateway Protocol (BGP)

as

Autonomous system number

static

Static

direct

Directly connected

amt

AMT anycast prefix

area

Configure area properties

area-id-ip

Area Id as an integer or ip address

filter-list

Filter prefixes between OSPF areas

in

Filter networks sent to this area

out

Filter networks sent from this area

tag

Command Mode

- /exec

show ospfv3 request-list

show [ ipv6 ] ospfv3 [ <tag> ] request-list { <ip-addr> | <neighbor-name> } <interface> [ __readonly__ [ TABLE_ctx <ptag> <cname> [ TABLE_lsreq <nbr_rid> <intf> <nbr_addr> <total> [ TABLE_lsa [ <type> ] [ <lsid> ] [ <advrtr> ] [ <seqno> ] [ <cksum> ] [ <age> ] ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

request-list

Link state request list

interface

OSPF enabled interface

ip-addr

Neighbor router ID

neighbor-name

DNS Name of the neighbor

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_lsreq

(Optional)

nbr_rid

(Optional)

intf

(Optional)

total

(Optional)

TABLE_lsa

(Optional)

type

(Optional)

lsid

(Optional)

advrtr

(Optional)

seqno

(Optional)

cksum

(Optional)

age

(Optional)

Command Mode

- /exec

show ospfv3 retransmission-list

show [ ipv6 ] ospfv3 [ <tag> ] retransmission-list { <routerid> | <router-name> } <interface> [ __readonly__ [ TABLE_ctx <ptag> <cname> [ TABLE_rxmit <nbr_rid> <intf> <nbr_addr> [ <timer_running> ] [ <timer_due> ] [ TABLE_lsa [ <type> ] [ <lsid> ] [ <advrtr> ] [ <seqno> ] [ <cksum> ] [ <age> ] ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

retransmission-list

Link state retransmission list

routerid

Neighbor router ID

router-name

DNS Name of the router

interface

OSPF enabled interface

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_rxmit

(Optional)

nbr_rid

(Optional)

intf

(Optional)

timer_running

(Optional)

timer_due

(Optional)

TABLE_lsa

(Optional)

type

(Optional)

lsid

(Optional)

advrtr

(Optional)

seqno

(Optional)

cksum

(Optional)

age

(Optional)

Command Mode

- /exec

show ospfv3 route

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] route [ <ipv6-prefix> [ longer-prefixes ] ] [ all_routes ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ <hdr_addr> ] [ <hdr_masklen> ] [ TABLE_route <addr> <masklen> <type> <in_rib> <direct> [ <area> ] [ <tag> ] [ <vlink_unresolved> ] [ TABLE_route_ubest_nh [ <ubest_nh_addr> ] [ <ubest_nh_intf> ] [ <ubest_cost> ] [ <distance> ] [ <ubest_nh_direct> ] [ <ubest_nh_in_rib> ] ] [ TABLE_route_mbest_nh [ <mbest_nh_addr> ] [ <mbest_nh_intf> ] [ <mbest_cost> ] [ <mbest_nh_direct> ] [ <mbest_nh_in_rib> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

route

Internal OSPF routes

longer-prefixes

(Optional) Show exact match and more specific routes

all_routes

(Optional) Display all OSPFv3 routes

tag

(Optional)

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

hdr_masklen

(Optional)

TABLE_route

(Optional)

masklen

(Optional)

type

(Optional)

in_rib

(Optional)

direct

(Optional)

area

(Optional)

vlink_unresolved

(Optional)

TABLE_route_ubest_nh

(Optional)

ubest_nh_intf

(Optional)

ubest_cost

(Optional)

distance

(Optional)

ubest_nh_direct

(Optional)

ubest_nh_in_rib

(Optional)

TABLE_route_mbest_nh

(Optional)

mbest_nh_intf

(Optional)

mbest_cost

(Optional)

mbest_nh_direct

(Optional)

mbest_nh_in_rib

(Optional)

Command Mode

- /exec

show ospfv3 route summary

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] route [ <ipv6-prefix> [ longer-prefixes ] ] summary [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_route <total_routes> <total_paths> [ TABLE_route_type <path_type> <path_routes> <path_paths> ] [ TABLE_route_masklen <masklen> <masklen_routes> <masklen_paths> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

route

Internal OSPF routes

longer-prefixes

(Optional) Show exact match and more specific routes

summary

Show route counts

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_route

(Optional)

total_routes

(Optional)

total_paths

(Optional)

TABLE_route_type

(Optional)

path_type

(Optional)

path_routes

(Optional)

path_paths

(Optional)

TABLE_route_masklen

(Optional)

masklen

(Optional)

masklen_routes

(Optional)

masklen_paths

(Optional)

Command Mode

- /exec

show ospfv3 statistics

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_stats <ptag> <cname> <last_clear> <rid_change> <dr_elections> <older_lsa_recv> <nbr_state_change> <nbr_dead_postpone> <nbr_dead_expire> <nbr_bad_lsreq> <nbr_seqno_mismatch> <spf_full> <spf_summary> <spf_external> <spf_extsummary> <rtr_generate> <rtr_refresh> <rtr_flush> <rtr_other_flush> <net_generate> <net_refresh> <net_flush> <net_other_flush> <inter_prefix_generate> <inter_prefix_refresh> <inter_prefix_flush> <inter_prefix_other_flush> <inter_router_generate> <inter_router_refresh> <inter_router_flush> <inter_router_other_flush> <asext_generate> <asext_refresh> <asext_flush> <asext_other_flush> <link_generate> <link_refresh> <link_flush> <link_other_flush> <intra_prefix_generate> <intra_prefix_refresh> <intra_prefix_flush> <intra_prefix_other_flush> <unknown_generate> <unknown_refresh> <unknown_flush> <unknown_other_flush> <limbo_lsa_count> <limbo_lsa_hwm> <limbo_lsa_deleted> <limbo_lsa_revived> <limbo_runs> <limbo_lsa_last_time_hwm> [ <limbo_timer> ] <helloq_size> <helloq_max_size> <helloq_hwm> <helloq_drops> <helloq_last_hwm_time> <floodq_size> <floodq_max_size> <floodq_hwm> <floodq_drops> <floodq_last_hwm_time> <lsdb_add_fail> [ TABLE_buffer_detail [ <buf_size> ] [ <buf_size_huge> ] <buf_in_use> <buf_hwm> <buf_perm> <buf_alloc> <buf_free> ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

statistics

Event counters

__readonly__

(Optional)

TABLE_stats

(Optional)

ptag

(Optional)

cname

(Optional)

last_clear

(Optional)

rid_change

(Optional)

dr_elections

(Optional)

older_lsa_recv

(Optional)

nbr_state_change

(Optional)

nbr_dead_postpone

(Optional)

nbr_dead_expire

(Optional)

nbr_bad_lsreq

(Optional)

nbr_seqno_mismatch

(Optional)

spf_full

(Optional)

spf_summary

(Optional)

spf_external

(Optional)

spf_extsummary

(Optional)

rtr_generate

(Optional)

rtr_refresh

(Optional)

rtr_flush

(Optional)

rtr_other_flush

(Optional)

net_generate

(Optional)

net_refresh

(Optional)

net_flush

(Optional)

net_other_flush

(Optional)

inter_prefix_generate

(Optional)

inter_prefix_refresh

(Optional)

inter_prefix_flush

(Optional)

inter_prefix_other_flush

(Optional)

inter_router_generate

(Optional)

inter_router_refresh

(Optional)

inter_router_flush

(Optional)

inter_router_other_flush

(Optional)

asext_generate

(Optional)

asext_refresh

(Optional)

asext_flush

(Optional)

asext_other_flush

(Optional)

link_generate

(Optional)

link_refresh

(Optional)

link_flush

(Optional)

link_other_flush

(Optional)

intra_prefix_generate

(Optional)

intra_prefix_refresh

(Optional)

intra_prefix_flush

(Optional)

intra_prefix_other_flush

(Optional)

unknown_generate

(Optional)

unknown_refresh

(Optional)

unknown_flush

(Optional)

unknown_other_flush

(Optional)

limbo_lsa_count

(Optional)

limbo_lsa_hwm

(Optional)

limbo_lsa_deleted

(Optional)

limbo_lsa_revived

(Optional)

limbo_runs

(Optional)

limbo_lsa_last_time_hwm

(Optional)

limbo_timer

(Optional)

helloq_size

(Optional)

helloq_max_size

(Optional)

helloq_hwm

(Optional)

helloq_drops

(Optional)

helloq_last_hwm_time

(Optional)

floodq_size

(Optional)

floodq_max_size

(Optional)

floodq_hwm

(Optional)

floodq_drops

(Optional)

floodq_last_hwm_time

(Optional)

lsdb_add_fail

(Optional)

TABLE_buffer_detail

(Optional)

buf_size

(Optional)

buf_size_huge

(Optional)

buf_in_use

(Optional)

buf_hwm

(Optional)

buf_perm

(Optional)

buf_alloc

(Optional)

buf_free

(Optional)

Command Mode

- /exec

show ospfv3 summary-address

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] summary-address [ private ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_ctx <ptag> <cname> <rid> [ TABLE_sum <addr> <masklen> [ <metric> ] [ <tag> ] [ <pending> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

summary-address

Summary-address redistribution information

private

(Optional) Developer-only statistics

tag

(Optional)

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

rid

(Optional)

TABLE_sum

(Optional)

masklen

(Optional)

metric

(Optional)

pending

(Optional)

Command Mode

- /exec

show ospfv3 traffic

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] traffic [ <interface> [ detail ] | [ detail ] | [ detail ] vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_traf <ptag> <cname> <last_clear> [ <ifname> ] <pkt_in> <pkt_out> <lsu_first_trans> <lsu_retrans> <lsu_for_lsreq> <lsu_nbr_trans> <throttle_out> <throttle_out_token> <throttle_out_ip> <lsa_ignored> <lsa_dropped_spf> <lsa_dropped_gr> <pkt_drops_in> <pkt_drops_out> <pkt_errors_in> <pkt_errors_out> <hello_errors_in> <dbds_errors_in> <lsreqs_errors_in> <lsus_errors_in> <lsacks_errors_in> <pkt_unknown_in> <pkt_unknown_out> <pkt_no_ospf_intf> <bad_version> <bad_crc> <dup_rtr_id> <dup_src_addr> <invalid_src_addr> <invalid_dst_addr> <non_existing_nbr> <pkt_passive_intf> <wrong_area> <invalid_pkt_len> <nbr_changed_routerid_ipaddr> <nbr_changed_interfaceid> [ <bad_auth> ] [ <bad_reserved> ] [ <pkt_no_vrf> ] <hellos_in> <dbds_in> <lsreqs_in> <lsus_in> <lsacks_in> <hellos_out> <dbds_out> <lsreqs_out> <lsus_out> <lsacks_out> [ <hellos_in_hq> <dbds_in_hq> <lsreqs_in_flq> <lsus_in_flq> <lsacks_in_flq> <lsas_in_dbds_in> <lsas_in_lsreqs_in> <lsas_in_lsus_in> <lsas_in_lsacks_in> <lsas_in_dbds_out> <lsas_in_lsreqs_out> <lsas_in_lsus_out> <lsas_in_lsacks_out> <lsas_in_rxmt_lsus_out> ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

interface

(Optional) OSPF enabled interface

detail

(Optional) Display detailed information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

traffic

Packet counters

__readonly__

(Optional)

TABLE_traf

(Optional)

ptag

(Optional)

cname

(Optional)

last_clear

(Optional)

ifname

(Optional)

pkt_in

(Optional)

pkt_out

(Optional)

lsu_first_trans

(Optional)

lsu_retrans

(Optional)

lsu_for_lsreq

(Optional)

lsu_nbr_trans

(Optional)

throttle_out

(Optional)

throttle_out_token

(Optional)

throttle_out_ip

(Optional)

lsa_ignored

(Optional)

lsa_dropped_spf

(Optional)

lsa_dropped_gr

(Optional)

pkt_drops_in

(Optional)

pkt_drops_out

(Optional)

pkt_errors_in

(Optional)

pkt_errors_out

(Optional)

hello_errors_in

(Optional)

dbds_errors_in

(Optional)

lsreqs_errors_in

(Optional)

lsus_errors_in

(Optional)

lsacks_errors_in

(Optional)

pkt_unknown_in

(Optional)

pkt_unknown_out

(Optional)

pkt_no_ospf_intf

(Optional)

bad_version

(Optional)

bad_crc

(Optional)

dup_rtr_id

(Optional)

dup_src_addr

(Optional)

invalid_src_addr

(Optional)

invalid_dst_addr

(Optional)

non_existing_nbr

(Optional)

pkt_passive_intf

(Optional)

wrong_area

(Optional)

invalid_pkt_len

(Optional)

nbr_changed_routerid_ipaddr

(Optional)

nbr_changed_interfaceid

(Optional)

bad_auth

(Optional)

bad_reserved

(Optional)

pkt_no_vrf

(Optional)

hellos_in

(Optional)

dbds_in

(Optional)

lsreqs_in

(Optional)

lsus_in

(Optional)

lsacks_in

(Optional)

hellos_out

(Optional)

dbds_out

(Optional)

lsreqs_out

(Optional)

lsus_out

(Optional)

lsacks_out

(Optional)

hellos_in_hq

(Optional)

dbds_in_hq

(Optional)

lsreqs_in_flq

(Optional)

lsus_in_flq

(Optional)

lsacks_in_flq

(Optional)

lsas_in_dbds_in

(Optional)

lsas_in_lsreqs_in

(Optional)

lsas_in_lsus_in

(Optional)

lsas_in_lsacks_in

(Optional)

lsas_in_dbds_out

(Optional)

lsas_in_lsreqs_out

(Optional)

lsas_in_lsus_out

(Optional)

lsas_in_lsacks_out

(Optional)

lsas_in_rxmt_lsus_out

(Optional)

Command Mode

- /exec

show ospfv3 virtual-links

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] virtual-links [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_vlink <name> <nbr_rid> <if_state> <transit_area> <nh_intf> <nbr_addr> [ <transit_area_stub> ] [ <transit_area_nssa> ] <addr> [ <masklen> ] <inst_id> <area> [ <if_cfg> ] <state_str> <type_str> <cost> <index> [ <passive> ] [ <mpls> ] [ <transmit_delay> ] [ <if_priority> ] [ <dr_rid> ] [ <dr_addr> ] [ <bdr_rid> ] [ <bdr_addr> ] [ <nbr_total> ] [ <nbr_flood> ] [ <nbr_adjs> ] [ <gr_nbr> ] [ <hello_interval> ] [ <dead_interval> ] [ <wait_interval> ] [ <rxmt_interval> ] [ <hello_timer> ] [ <wait_timer> ] [ <pacing_timer> ] [ <lsu_timer> ] [ <lsack_timer> ] [ <netlsa_throt_timer> ] [ <link_lsa_cnt> ] [ <link_lsa_crc> ] [ <state> ] [ <transition> ] [ <lastchange> ] [ <priority> ] [ <ifid> ] [ <dr> ] [ <bdr> ] [ <master> ] [ <seqno> ] [ <dbdallsentacked> ] [ <dbdallsent> ] [ <dbdallacked> ] [ <lsaonreqlist> ] [ <lsafromlastreq> ] [ <lsreqrxmts> ] [ <helloptions> ] [ <dbdoptions> ] [ <lastnonhello> ] [ <deadtimer> ] [ <pacingtimer> ] [ <dbdrxmtimer> ] [ <reqrxmtimer> ] [ <lsutimer> ] [ <rerxmtimer> ] [ <fastrerxmtimer> ] [ <lsacktimer> ] [ <grtimer> ] [ <helpermode> ] [ <helpercand> ] [ <helperterm> ] [ <senddbd> ] [ <sendlsreq> ] [ <sendlsu> ] [ <sendlsurxmt> ] [ <sendlsack> ] [ <sendlsreqreply> ] [ <ipsec_sa_type> ] [ <ipsec_sa_algorithm> ] [ <ipsec_sa_spi> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

virtual-links

Virtual link information

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

TABLE_vlink

(Optional)

name

(Optional)

nbr_rid

(Optional)

if_state

(Optional)

transit_area

(Optional)

nh_intf

(Optional)

transit_area_stub

(Optional)

transit_area_nssa

(Optional)

masklen

(Optional)

inst_id

(Optional)

area

(Optional)

if_cfg

(Optional)

state_str

(Optional)

type_str

(Optional)

cost

(Optional)

index

(Optional)

passive

(Optional)

mpls

(Optional)

transmit_delay

(Optional)

if_priority

(Optional)

dr_rid

(Optional)

bdr_rid

(Optional)

nbr_total

(Optional)

nbr_flood

(Optional)

nbr_adjs

(Optional)

gr_nbr

(Optional)

hello_interval

(Optional)

dead_interval

(Optional)

wait_interval

(Optional)

rxmt_interval

(Optional)

hello_timer

(Optional)

wait_timer

(Optional)

pacing_timer

(Optional)

lsu_timer

(Optional)

lsack_timer

(Optional)

netlsa_throt_timer

(Optional)

link_lsa_cnt

(Optional)

link_lsa_crc

(Optional)

state

(Optional)

transition

(Optional)

lastchange

(Optional)

priority

(Optional)

ifid

(Optional)

dr

(Optional)

bdr

(Optional)

master

(Optional)

seqno

(Optional)

dbdallsentacked

(Optional)

dbdallsent

(Optional)

dbdallacked

(Optional)

lsaonreqlist

(Optional)

lsafromlastreq

(Optional)

lsreqrxmts

(Optional)

helloptions

(Optional)

dbdoptions

(Optional)

lastnonhello

(Optional)

deadtimer

(Optional)

pacingtimer

(Optional)

dbdrxmtimer

(Optional)

reqrxmtimer

(Optional)

lsutimer

(Optional)

rerxmtimer

(Optional)

fastrerxmtimer

(Optional)

lsacktimer

(Optional)

grtimer

(Optional)

helpermode

(Optional)

helpercand

(Optional)

helperterm

(Optional)

senddbd

(Optional)

sendlsreq

(Optional)

sendlsu

(Optional)

sendlsurxmt

(Optional)

sendlsack

(Optional)

sendlsreqreply

(Optional)

ipsec_sa_type

(Optional) IPsec SA Type

ipsec_sa_algorithm

(Optional) IPsec SA Algorithm name

ipsec_sa_spi

(Optional) IPsec SA SPI Value

Command Mode

- /exec

show ospfv3 virtual-links brief

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] virtual-links brief [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> <vlink_count> [ TABLE_vlink <nbr_rid> <vlink_num> <transit_area> <cost> <if_state> ] ]

Syntax Description

Syntax Description

show

Show running system information

ipv6

(Optional) Display IPv6 information

ospfv3

Display OSPFv3 status and configuration

tag

(Optional) Process tag

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

virtual-links

Virtual link information

brief

Display summary of OSPFv3 virtual links

__readonly__

(Optional)

TABLE_ctx

(Optional)

ptag

(Optional)

cname

(Optional)

vlink_count

(Optional)

TABLE_vlink

(Optional)

nbr_rid

(Optional)

vlink_num

(Optional)

transit_area

(Optional)

cost

(Optional)

if_state

(Optional)

Command Mode

- /exec

show otv

show otv [ <overlay-if> [ vpn <vpn-name> ] ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

overlay-if

(Optional) Overlay interface

vpn

(Optional) Overlay VPN name

vpn-name

(Optional) OTV VPN Name

Command Mode

- /exec

show otv adjacency

show otv adjacency [ detail ] [ <overlay-if> | vpn <vpn-name> ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

overlay-if

(Optional) Overlay interface

vpn

(Optional) Overlay VPN name

vpn-name

(Optional) OTV VPN Name

adjacency

Show adjacencies on overlay

detail

(Optional) Adjacency details

Command Mode

- /exec

show otv arp-nd-cache

show otv arp-nd-cache [ <overlay-if> | vpn <vpn-name> | vlan-id <vlan_id> ] [ __readonly__ { TABLE_arp-nd-cache <if-name> <vlan-id> <mac-addr> <l3-addr> <uptime> <expiry> } ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

overlay-if

(Optional) Overlay interface

vpn

(Optional) Overlay VPN name

vpn-name

(Optional) OTV VPN Name

vlan-id

(Optional) Vlan id filter

vlan_id

(Optional) Vlan id

arp-nd-cache

Display (L3, L2) addresses cached from ARP and ND packet inspection

__readonly__

(Optional)

TABLE_arp-nd-cache

(Optional)

if-name

(Optional)

vlan-id

(Optional)

mac-addr

(Optional)

l3-addr

(Optional)

uptime

(Optional)

expiry

(Optional)

Command Mode

- /exec

show otv data-group

show otv data-group [ local | remote ] [ [ <overlay-if> ] [ vlan <vlan-id> ] [ source <source> ] [ group <group> ] [ delivery-source <dsource> ] [ delivery-group <dgroup> ] [ join-interface <jif> ] ] +

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

data-group

Data groups

local

(Optional) Local sources/groups

remote

(Optional) Remote sources/groups

overlay-if

(Optional) Overlay interface

vlan

(Optional) Vlan

vlan-id

(Optional) Vlan ID

source

(Optional) active-source source

source

(Optional) active-source source address

group

(Optional) active-source group

group

(Optional) active-source group address

delivery-source

(Optional) delivery source

dsource

(Optional) delivery source address

delivery-group

(Optional) delivery group

dgroup

(Optional) delivery group address

join-interface

(Optional) join interface

jif

(Optional) interface

Command Mode

- /exec

show otv internal

show otv internal [ { overlay | adjacency | cache-site-adj | vlan [ <vlan-range> ] | site } [ detail ] ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

overlay

(Optional) Show overlay information

adjacency

(Optional) Show adjacencies on overlay

cache-site-adj

(Optional) Show site-adj-cache database

vlan

(Optional) Show internal vlan database

vlan-range

(Optional) VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19

site

(Optional) Show Site database

detail

(Optional) Show detailed output

Command Mode

- /exec

show otv internal

show otv internal [ partition ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

partition

(Optional) show remote partition site-id db

Command Mode

- /exec

show otv internal

show otv internal [ remote-db ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

remote-db

(Optional) show remote partition vlan db

Command Mode

- /exec

show otv internal

show otv internal [ device-db ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

device-db

(Optional) show device db

Command Mode

- /exec

show otv internal adjacency-server replication-list

show otv internal adjacency-server replication-list [ <overlay-if> | vpn <vpn-name> ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

internal

Display OTV internal information

overlay-if

(Optional) Overlay interface

vpn

(Optional) Overlay VPN name

vpn-name

(Optional) OTV VPN Name

adjacency-server

Adjacency Server

replication-list

Display Runtime internal Replication List

Command Mode

- /exec

show otv internal aed-server

show otv internal aed-server [ detail | <overlay-if> | vpn <vpn-name> ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

internal

aed-server

Show aed server state

detail

(Optional) Show detailed aed_server state

overlay-if

(Optional) Overlay interface

vpn

(Optional) Overlay VPN name

vpn-name

(Optional) OTV VPN Name

Command Mode

- /exec

show otv internal blackholing state

show otv internal blackholing state [ <overlay-if> | vpn <vpn-name> ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

blackholing

Display OTV blackholing state

state

Display OTV blackholing state

overlay-if

(Optional) Overlay interface

vpn

(Optional) Overlay VPN name

vpn-name

(Optional) OTV VPN Name

Command Mode

- /exec

show otv internal cleanup

show otv internal cleanup [ <overlay-if> ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

cleanup

Show overlay cleanup information

overlay-if

(Optional) Overlay interface

Command Mode

- /exec

show otv internal event-history

show otv internal event-history { errors | packet | msgs | cli | learn | debug | event | arp-nd | statistics | fc | delivery | stp | route }

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

internal

Display OTV internal information

event-history

Show various event logs of OTV

errors

Error logs of OTV

msgs

Message logs of OTV

cli

CLI logs of OTV

learn

Learn logs of OTV

debug

Internal debug logs of OTV

fc

FC logs of OTV

event

Event logs of OTV

arp-nd

ARP-ND logs of OTV

packet

OTV packet logs

statistics

Statistics for OTV event history

delivery

Delivery groups logs of OTV

stp

STP logs of OTV

route

Route update logs of OTV

Command Mode

- /exec

show otv internal mem-stats

show otv internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

internal

Display OTV internal information

mem-stats

Dynamic memory stats

detail

(Optional) Detailed information

Command Mode

- /exec

show otv internal overlay history

show otv internal overlay history [ aed_svr | ed_summ | cleanup ] [ sent | recv | all | clr | active | backup ] [ <overlay-if> ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

overlay

overlay

history

history

aed_svr

(Optional) aed_svr

ed_summ

(Optional) edge device summary

cleanup

(Optional) cleanup

sent

(Optional) sent

recv

(Optional) recv

all

(Optional) all

clr

(Optional) clr

active

(Optional) active

backup

(Optional) backup

overlay-if

(Optional) Overlay interface

Command Mode

- /exec

show otv internal peer-id allocation

show otv internal peer-id allocation

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

internal

Display OTV internal information

peer-id

Display peer-id allocation requests

allocation

Command Mode

- /exec

show otv internal pim-cache

show otv internal pim-cache [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

internal

Display OTV internal information

pim-cache

Show PIM client cache

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display information for all VRFs

Command Mode

- /exec

show otv internal replication-list sdb

show otv internal replication-list { sdb | pss }

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

internal

Display OTV internal information

replication-list

Display Runtime internal Replication List

sdb

Display Shared Replication List used by PM

pss

Display internal replication list database

Command Mode

- /exec

show otv internal shared-database

show otv internal shared-database [ overlay | peer-global-info | peer-ovly-info | adj | vlan | gen | site | tunnel | delivery-group-db | local-delivery-groups | local-active-sources | local-exit-interface | buffers | hostname | site-index | partition | partition-vlan | vlan-device | device-db | vlan-status | aed-server-req | ed-summary | vlan-mapping | aed-map ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

internal

Display OTV internal information

shared-database

Shared-database contents

overlay

(Optional) Overlay interface database

adj

(Optional) Adjacency interface database

vlan

(Optional) Vlan interface database

gen

(Optional) Geninfo database

site

(Optional) Site Adjacency database

tunnel

(Optional) TM GRE Tunnels

delivery-group-db

(Optional) Delivery group database

local-delivery-groups

(Optional) Local delivery groups

local-active-sources

(Optional) Local active sources

local-exit-interface

(Optional) Local delivery group to exit i/f mapping

peer-global-info

(Optional) Global peer-id alloc state

peer-ovly-info

(Optional) Overlay wise peer VPC info

buffers

(Optional) Batched SDB Update/Del buffer state

hostname

(Optional) Sysid to Hostname mapping

site-index

(Optional) Site-index for remote sites

partition

(Optional) Partition db for remote sites

partition-vlan

(Optional) VLAN db of partition

vlan-device

(Optional) Device db for each VLAN

device-db

(Optional) Device and site database

vlan-status

(Optional) vlan status

aed-server-req

(Optional) AED Server request

ed-summary

(Optional) Edge device summary DB

vlan-mapping

(Optional) Vlan translation mapping info

aed-map

(Optional) AED Map

Command Mode

- /exec

show otv internal snmp cotvAdjacencyDatabaseTable cotvOverlayNumber cotvAdjacentDevAddrType cotvAdjacentDevAddr

show otv internal snmp cotvAdjacencyDatabaseTable cotvOverlayNumber <overlay_number_in> cotvAdjacentDevAddrType <address_type_in> cotvAdjacentDevAddr <address_in> [ __readonly__ TABLE-cotvAdjacencyDatabaseTable <overlay_number_out> <address_type_out> <address_out> <cotvAdjacentDevSystemID> <cotvAdjacentDevName> <cotvAdjacentDevState> <cotvAdjacentDevUpTime> ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

snmp

otv adjacency for snmp

cotvAdjacencyDatabaseTable

cotvOverlayNumber

overlay_number_in

cotvAdjacentDevAddrType

address_type_in

cotvAdjacentDevAddr

address_in

__readonly__

(Optional) Read Only

TABLE-cotvAdjacencyDatabaseTable

(Optional) otv adjacency xml table

overlay_number_out

(Optional)

address_type_out

(Optional)

address_out

(Optional)

cotvAdjacentDevSystemID

(Optional)

cotvAdjacentDevName

(Optional)

cotvAdjacentDevState

(Optional)

cotvAdjacentDevUpTime

(Optional)

Command Mode

- /exec

show otv internal snmp cotvArpNdCacheTable cotvOverlayNumber cotvVlanId cotvArpNdCacheL3AddrType cotvArpNdCacheL3Addr

show otv internal snmp cotvArpNdCacheTable cotvOverlayNumber <overlay_num> cotvVlanId <vlan_id> cotvArpNdCacheL3AddrType <l3_addr_type> cotvArpNdCacheL3Addr <l3_addr> [ __readonly__ { TABLE-cotvArpNdCacheTable <overlay_num_out> <vlan_id_out> <l3_addr_type_out> <l3_addr_out> <mac_addr> <arp_nd_age> <arp_nd_expire_time> } ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

snmp

cotvArpNdCacheTable

cotvOverlayNumber

overlay_num

cotvVlanId

vlan_id

cotvArpNdCacheL3AddrType

l3_addr_type

cotvArpNdCacheL3Addr

l3_addr

__readonly__

(Optional)

TABLE-cotvArpNdCacheTable

(Optional)

overlay_num_out

(Optional)

vlan_id_out

(Optional)

l3_addr_type_out

(Optional)

l3_addr_out

(Optional)

mac_addr

(Optional)

arp_nd_age

(Optional)

arp_nd_expire_time

(Optional)

Command Mode

- /exec

show otv internal snmp cotvDataGroupConfigTable overlay mcasttype mcastaddr prefixlen

show otv internal snmp cotvDataGroupConfigTable overlay <cotvOverlayNumber-in> mcasttype <cotvDataGroupMcastRangeAddrType-in> mcastaddr <cotvDataGroupMcastRangeAddr-in> prefixlen <cotvDataGroupMcastRangePrefixLength-in> [ __readonly__ TABLE-cotvDataGroupConfigTable <cotvOverlayNumber-out> <cotvDataGroupMcastRangeAddrType-out> <cotvDataGroupMcastRangeAddr-out> <cotvDataGroupMcastRangePrefixLength-out> <cotvDataGroupStorageType> <cotvDataGroupRowStatus> ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

snmp

cotvDataGroupConfigTable

overlay

OverlayNumber

cotvOverlayNumber-in

mcasttype

cotvDataGroupMcastRangeAddrType-in

mcastaddr

cotvDataGroupMcastRangeAddr-in

prefixlen

cotvDataGroupMcastRangePrefixLength-in

__readonly__

(Optional)

TABLE-cotvDataGroupConfigTable

(Optional)

cotvOverlayNumber-out

(Optional) mib table index cotvOverlayNumber

cotvDataGroupMcastRangeAddrType-out

(Optional) mib table index

cotvDataGroupMcastRangeAddr-out

(Optional) mib table index

cotvDataGroupMcastRangePrefixLength-out

(Optional) mib table index

cotvDataGroupStorageType

(Optional) mib object cotvDataGroupStorageType

cotvDataGroupRowStatus

(Optional) mib object cotvDataGroupRowStatus

Command Mode

- /exec

show otv internal snmp cotvDataGroupInfoTable overlay location

show otv internal snmp cotvDataGroupInfoTable overlay <cotvOverlayNumber-in> location <cotvDataGroupActiveSrcLocation-in>

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

snmp

cotvDataGroupInfoTable

overlay

OverlayNumber

cotvOverlayNumber-in

location

Location

cotvDataGroupActiveSrcLocation-in

Command Mode

- /exec

show otv internal snmp cotvOverlayTable cotvOverlayNumber

show otv internal snmp cotvOverlayTable cotvOverlayNumber <overlay_num> [ __readonly__ { TABLE-cotvOverlayTable <overlay_num_out> <vpn_name> <vpn_state> <vpn_down_reason> <extend_vlan_first> <extend_vlan_second> <ctrl_grp_addr_type> <ctrl_grp_addr> <broadcast_grp_addr_type> <broadcast_grp_addr> <join_intf> <src_intf> <aed_capable> <aed_incapable_reason> <transport_type> <adj_server_enable> <primary_adj_server_addr_type> <primary_adj_server_addr> <secondary_adj_server_addr_type> <secondary_adj_server_addr> <suppress_arp_nd> <storage_type> <row_status> } ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

snmp

cotvOverlayTable

cotvOverlayNumber

overlay_num

__readonly__

(Optional)

TABLE-cotvOverlayTable

(Optional)

overlay_num_out

(Optional)

vpn_name

(Optional)

vpn_state

(Optional)

vpn_down_reason

(Optional)

extend_vlan_first

(Optional)

extend_vlan_second

(Optional)

ctrl_grp_addr_type

(Optional)

ctrl_grp_addr

(Optional)

broadcast_grp_addr_type

(Optional)

broadcast_grp_addr

(Optional)

join_intf

(Optional)

src_intf

(Optional)

aed_capable

(Optional)

aed_incapable_reason

(Optional)

transport_type

(Optional)

adj_server_enable

(Optional)

primary_adj_server_addr_type

(Optional)

primary_adj_server_addr

(Optional)

secondary_adj_server_addr_type

(Optional)

secondary_adj_server_addr

(Optional)

suppress_arp_nd

(Optional)

storage_type

(Optional)

row_status

(Optional)

Command Mode

- /exec

show otv internal snmp cotvVlansTable overlay vlan

show otv internal snmp cotvVlansTable overlay <cotvOverlayNumber-in> vlan <cotvVlanId-in> [ __readonly__ TABLE-cotvVlansTable <cotvOverlayNumber-out> <cotvVlanId-out> <cotvVlanState> <cotvVlanInactiveReason> <cotvVlanAedAddrType> <cotvVlanAedAddr> <cotvVlanEdgeDevIsAed> ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

snmp

cotvVlansTable

overlay

OverlayNumber

cotvOverlayNumber-in

vlan

VlanId

cotvVlanId-in

__readonly__

(Optional)

TABLE-cotvVlansTable

(Optional)

cotvOverlayNumber-out

(Optional) mib table index cotvOverlayNumber

cotvVlanId-out

(Optional) mib table index cotvVlanId

cotvVlanState

(Optional) mib object cotvVlanState

cotvVlanInactiveReason

(Optional) mib object cotvVlanInactiveReason

cotvVlanAedAddrType

(Optional) mib object cotvVlanAedAddrType

cotvVlanAedAddr

(Optional) mib object cotvVlanAedAddr

cotvVlanEdgeDevIsAed

(Optional) mib object cotvVlanEdgeDevIsAed

Command Mode

- /exec

show otv internal snmp global cotvSiteIdAdmin

show otv internal snmp global cotvSiteIdAdmin [ __readonly__ <admin_site_id> ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

snmp

global

cotvSiteIdAdmin

__readonly__

(Optional)

admin_site_id

(Optional)

Command Mode

- /exec

show otv internal snmp global cotvSiteIdOper

show otv internal snmp global cotvSiteIdOper [ __readonly__ <oper_site_id> ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

snmp

global

cotvSiteIdOper

__readonly__

(Optional)

oper_site_id

(Optional)

Command Mode

- /exec

show otv internal snmp global cotvSiteVlan

show otv internal snmp global cotvSiteVlan [ __readonly__ <site_vlan> ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

snmp

global

cotvSiteVlan

__readonly__

(Optional)

site_vlan

(Optional)

Command Mode

- /exec

show otv internal snmp global cotvSiteVlanState

show otv internal snmp global cotvSiteVlanState [ __readonly__ <site_vlan_state> ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

snmp

global

cotvSiteVlanState

__readonly__

(Optional)

site_vlan_state

(Optional)

Command Mode

- /exec

show otv internal state

show otv internal state

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

state

Display OTV server state

Command Mode

- /exec

show otv internal static-routes unicast

show otv internal static-routes { unicast | multicast }

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

internal

Display OTV internal information

static-routes

Show OTV Static Routes

unicast

Show Static Unicast Routes

multicast

Show Static Multicast Routes

Command Mode

- /exec

show otv internal tunnel

show otv internal tunnel

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

internal

Display OTV internal information

tunnel

Display OTV tunnel information

Command Mode

- /exec

show otv internal ufdm peers

show otv internal ufdm peers [ avl | array ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

internal

Display OTV internal information

ufdm

Display UFDM peers

peers

Display OTV peer information

avl

(Optional) Display peer AVL structure

array

(Optional) Display peer array structure

Command Mode

- /exec

show otv internal vlan history

show otv internal vlan history { vlan-state | aed-svr-req | local | hw } [ sent | recv | clr ] [ <vlan-id> ] [ detail ] [ all ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

vlan

vlan

history

history

vlan-state

vlan-state

aed-svr-req

aed-svr-req

local

local

hw

hw

sent

(Optional) sent

recv

(Optional) recv

all

(Optional) all

clr

(Optional) clr

detail

(Optional) Show detailed output

vlan-id

(Optional) Vlan id

Command Mode

- /exec

show otv internal vlan state

show otv internal vlan state [ <device-id> ] [ <version> ] [ add | del | ready | helper | aed | bkp ] [ <overlay-if> ] [ all ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

internal

Display OTV internal information

vlan

vlan

state

State

device-id

(Optional) Device ID in MAC address format

version

(Optional) Version

add

(Optional) Add

del

(Optional) Delete

ready

(Optional) Forward Ready

helper

(Optional) Packing Helper

aed

(Optional) AED

bkp

(Optional) backup AED

overlay-if

(Optional) Overlay interface

all

(Optional) All local and remote info

Command Mode

- /exec

show otv isis

show otv isis [ <otv-isis-tag> ] [ vpn { <vrf-name> | all } ] [ process | protocol ] [ vpn { <vrf-name> | all } ] [ __readonly__ <tag-out> TABLE_vrf <vrf-name-out> <system-id-out> <is-type-out> <sap-out> <mtu-out> <qh-out> <gr-t3-timer-out> <gr-status-out> <gr-state-out> <last-gr-status-out> <bfd-state-out> <metric-send-out> <metric-accept-out> <area-addr-out> <proc-state-out> <vrf-id-out> <te-lvl-out> <te-ted-out> <mpls-te-out> <intf-name-out> <auth-out> <auth-chk-out> <auth-kchain-out> [ { TABLE_redist <max_redist> <warning> <threshold> <current_count> } ] TABLE_afi_safi <afi-safi-out> <intf-num-out> <adj-check-out> <redist-pib-out> <redist-rpm-out> <dist-src-lvl-out> <dist-dest-lvl-out> <dist-leak-all-out> <dist-rpm-out> <admin-dist-out> ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) Display information for all VRFs

process

(Optional) Display IS-IS process information

protocol

(Optional) Display IS-IS process information

__readonly__

(Optional)

tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi_safi

(Optional)

afi-safi-out

(Optional)

system-id-out

(Optional)

is-type-out

(Optional)

sap-out

(Optional)

mtu-out

(Optional)

qh-out

(Optional)

gr-t3-timer-out

(Optional)

gr-status-out

(Optional)

gr-state-out

(Optional)

last-gr-status-out

(Optional)

bfd-state-out

(Optional)

metric-send-out

(Optional)

metric-accept-out

(Optional)

area-addr-out

(Optional)

proc-state-out

(Optional)

vrf-id-out

(Optional)

te-lvl-out

(Optional)

te-ted-out

(Optional)

mpls-te-out

(Optional)

intf-name-out

(Optional)

auth-out

(Optional)

auth-chk-out

(Optional)

auth-kchain-out

(Optional)

TABLE_redist

(Optional)

max_redist

(Optional)

warning

(Optional)

threshold

(Optional)

current_count

(Optional)

intf-num-out

(Optional)

adj-check-out

(Optional)

redist-pib-out

(Optional)

redist-rpm-out

(Optional)

dist-src-lvl-out

(Optional)

dist-dest-lvl-out

(Optional)

dist-leak-all-out

(Optional)

dist-rpm-out

(Optional)

admin-dist-out

(Optional)

Command Mode

- /exec

show otv isis active-source

show otv isis [ <otv-isis-tag> ] active-source [ vlan <vlan-id> [ group <gip-addr> [ source <sip-addr> ] ] ] [ summary ] [ vpn { <vrf-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

active-source

Display IS-IS Active-source information

vlan

(Optional) Display IS-IS VLAN information

vlan-id

(Optional) Display IS-IS VLAN information

group

(Optional) Display IS-IS Group information

source

(Optional) Display IS-IS Source information

gip-addr

(Optional) Display single IP redistribute route

sip-addr

(Optional) Display single IP redistribute route

summary

(Optional) Display route counts

Command Mode

- /exec

show otv isis adjacency

show otv isis [ <otv-isis-tag> ] adjacency [ <interface> ] { [ system-id <sid> ] | [ detail ] | [ summary ] } [ vpn { <vrf-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> <adj-summary-out> <adj-interface-out> [ <adj-interface-name-out> ] [ { TABLE_process_adj <adj-sys-name-out> <adj-sys-id-out> [ <adj-usage-out> ] [ <adj-level-out> ] <adj-state-out> <adj-hold-time-out> <adj-intf-name-out> <adj-site-out> <adj-detail-set-out> [ { <adj-transitions-out> <adj-flap-out> [ <adj-flap-time-out> ] <adj-ckt-type-out> <adj-ipv4-addr-out> <adj-ipv6-addr-out> <adj-bcast-out> [ { <adj-ckt-id-out> <adj-lan-prio-out> } ] <adj-resurrect-out> [ { <adj-resurrect-count-out> <adj-resurrect-hwm-out> } ] } ] } ] [ { TABLE_lan_adj_sum <adj-summ-lan-level-out> <adj-summ-lan-state-out> <adj-summ-lan-count-out> } ] } } ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

adjacency

Display IS-IS adjacency information

interface

(Optional) IS-IS interface

system-id

(Optional) Hostname or System ID

sid

(Optional) Hostname or System ID (in the form of XXXX.XXXX.XXXX)

detail

(Optional) Display IS-IS adjacency detail information

summary

(Optional) Display IS-IS adjacency summary information

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

adj-summary-out

(Optional)

adj-interface-out

(Optional)

adj-interface-name-out

(Optional)

TABLE_process_adj

(Optional)

adj-sys-name-out

(Optional)

adj-sys-id-out

(Optional)

adj-usage-out

(Optional)

adj-level-out

(Optional)

adj-state-out

(Optional)

adj-hold-time-out

(Optional)

adj-intf-name-out

(Optional)

adj-site-out

(Optional)

adj-detail-set-out

(Optional)

adj-transitions-out

(Optional)

adj-flap-out

(Optional)

adj-flap-time-out

(Optional)

adj-ckt-type-out

(Optional)

adj-ipv4-addr-out

(Optional)

adj-ipv6-addr-out

(Optional)

adj-bcast-out

(Optional)

adj-ckt-id-out

(Optional)

adj-lan-prio-out

(Optional)

adj-resurrect-out

(Optional)

adj-resurrect-count-out

(Optional)

adj-resurrect-hwm-out

(Optional)

TABLE_lan_adj_sum

(Optional)

adj-summ-lan-level-out

(Optional)

adj-summ-lan-state-out

(Optional)

adj-summ-lan-count-out

(Optional)

Command Mode

- /exec

show otv isis aed-svr-req local

show otv isis [ <otv-isis-tag> ] aed-svr-req { local | remote }

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

aed-svr-req

Display aed svr req Info

local

local

remote

remote

Command Mode

- /exec

show otv isis csnp

show otv isis [ <otv-isis-tag> ] csnp [ detail ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

csnp

Display IS-IS CSNP cache contents

detail

(Optional) Display detailed IS-IS information

Command Mode

- /exec

show otv isis database

show otv isis [ <otv-isis-tag> ] [ site ] database [ mgroup ] [ detail | advertise | summary ] [ <lid> ] { [ zero-sequence ] | [ adjacency <adj-id> ] } [ vpn { <vrf-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> [ <dbase-hname-absent-out> ] [ { TABLE_process_lvl <dbase-level-out> [ { TABLE_process_lsp <dbase-lsp-name-out> <dbase-lsp-status-out> <dbase-lsp-absent-out> [ { <dbase-lsp-seqnum-out> <dbase-lsp-cksum-out> [ <dbase-lsp-lifetime-str-out> ] [ <dbase-lsp-lifetime-out> ] <dbase-att-out> <dbase-partition-out> <dbase-overload-out> <dbase-istype-out> } ] [ { <dbase-lsp-instance-out> [ { TABLE_process_tlv <dbase-lsp-tlv-name-out> [ <dbase-lsp-area-addr-out> ] [ <dbase-lsp-is-nbr-name-out> ] [ <dbase-lsp-is-nbr-metric-out> ] [ <dbase-lsp-is-nbr-ext-metric-out> ] [ <dbase-lsp-es-nbr-name-out> ] [ <dbase-lsp-es-nbr-metric-out> ] [ <dbase-lsp-es-nbr-ext-metric-out> ] [ <dbase-lsp-auth-type-out> ] [ <dbase-lsp-auth-len-out> ] [ <dbase-lsp-ext-is-name-out> ] [ <dbase-lsp-ext-is-metric-out> ] [ <dbase-lsp-ip-ri-addr-out> ] [ <dbase-lsp-ip-ri-mask-out> ] [ <dbase-lsp-ip-ri-metric-out> ] [ <dbase-lsp-ip-ri-ext-metric-out> ] [ <dbase-lsp-ip-ri-up-down-out> ] [ { TABLE_process_nlpid <dbase-lsp-prot-support-out> } ] [ <dbase-lsp-ip-addr-out> ] [ <dbase-lsp-ipv6-addr-out> ] [ { TABLE_process_extip <dbase-lsp-extip-addr-out> <dbase-lsp-extip-prefix-len-out> <dbase-lsp-extip-metric-out> <dbase-lsp-extip-up-down-out> } ] [ <dbase-lsp-hname-out> ] [ <dbase-lsp-hname-len-out> ] [ { TABLE_process_extipv6 <dbase-lsp-extipv6-addr-out> <dbase-lsp-extipv6-prefix-len-out> <dbase-lsp-extipv6-metric-out> <dbase-lsp-extipv6-up-down-out> <dbase-lsp-extipv6-ext-origin-out> } ] [ <dbase-lsp-tlv-len-out> ] [ <dbase-lsp-tlv-unknown-out> ] [ { TABLE_process_subtlv <dbase-lsp-subtlv-name-out> [ <dbase-lsp-extis-admin-group-out> ] [ <dbase-lsp-subtlv-ip-addr-out> ] [ <dbase-lsp-extis-bw-out> ] [ <dbase-lsp-extis-pri1-out> ] [ <dbase-lsp-extis-pri1-val-out> ] [ <dbase-lsp-extis-pri2-out> ] [ <dbase-lsp-extis-pri2-val-out> ] [ <dbase-lsp-extis-te-metric-out> ] [ <dbase-lsp-subtlv-len-out> ] [ <dbase-lsp-subtlv-unknown-out> ] } ] } ] <dbase-lsp-digest-out> } ] } ] [ { <dbase-lsp-total-out> [ { <dbase-lsp-empty-out> <dbase-lsp-zeroseq-out> } ] } ] } ] } } ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

site

(Optional) Display IS-IS OTV site information

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

database

Display IS-IS database information

mgroup

(Optional) Display IS-IS GM database information

lid

(Optional) LSP ID in the form of XXXX.XXXX.XXXX.XX-XX

detail

(Optional) Display detailed IS-IS information

advertise

(Optional) Display advertise tlv lsp-memory information

summary

(Optional) Display summary IS-IS information

zero-sequence

(Optional) LSP with zero sequence number

adjacency

(Optional) Adjacency filter

adj-id

(Optional) Single exact match adjacency filter

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

dbase-hname-absent-out

(Optional)

TABLE_process_lvl

(Optional)

dbase-level-out

(Optional)

TABLE_process_lsp

(Optional)

dbase-lsp-name-out

(Optional)

dbase-lsp-status-out

(Optional)

dbase-lsp-absent-out

(Optional)

dbase-lsp-seqnum-out

(Optional)

dbase-lsp-cksum-out

(Optional)

dbase-lsp-lifetime-str-out

(Optional)

dbase-lsp-lifetime-out

(Optional)

dbase-att-out

(Optional)

dbase-partition-out

(Optional)

dbase-overload-out

(Optional)

dbase-istype-out

(Optional)

dbase-lsp-instance-out

(Optional)

TABLE_process_tlv

(Optional)

dbase-lsp-tlv-name-out

(Optional)

dbase-lsp-area-addr-out

(Optional)

dbase-lsp-is-nbr-name-out

(Optional)

dbase-lsp-is-nbr-metric-out

(Optional)

dbase-lsp-is-nbr-ext-metric-out

(Optional)

dbase-lsp-es-nbr-name-out

(Optional)

dbase-lsp-es-nbr-metric-out

(Optional)

dbase-lsp-es-nbr-ext-metric-out

(Optional)

dbase-lsp-auth-type-out

(Optional)

dbase-lsp-auth-len-out

(Optional)

dbase-lsp-ext-is-name-out

(Optional)

dbase-lsp-ext-is-metric-out

(Optional)

dbase-lsp-ip-ri-addr-out

(Optional)

dbase-lsp-ip-ri-mask-out

(Optional)

dbase-lsp-ip-ri-metric-out

(Optional)

dbase-lsp-ip-ri-ext-metric-out

(Optional)

dbase-lsp-ip-ri-up-down-out

(Optional)

TABLE_process_nlpid

(Optional)

dbase-lsp-prot-support-out

(Optional)

dbase-lsp-ip-addr-out

(Optional)

dbase-lsp-ipv6-addr-out

(Optional)

TABLE_process_extip

(Optional)

dbase-lsp-extip-addr-out

(Optional)

dbase-lsp-extip-prefix-len-out

(Optional)

dbase-lsp-extip-metric-out

(Optional)

dbase-lsp-extip-up-down-out

(Optional)

dbase-lsp-hname-out

(Optional)

dbase-lsp-hname-len-out

(Optional)

TABLE_process_extipv6

(Optional)

dbase-lsp-extipv6-addr-out

(Optional)

dbase-lsp-extipv6-prefix-len-out

(Optional)

dbase-lsp-extipv6-metric-out

(Optional)

dbase-lsp-extipv6-up-down-out

(Optional)

dbase-lsp-extipv6-ext-origin-out

(Optional)

dbase-lsp-tlv-len-out

(Optional)

dbase-lsp-tlv-unknown-out

(Optional)

TABLE_process_subtlv

(Optional)

dbase-lsp-subtlv-name-out

(Optional)

dbase-lsp-extis-admin-group-out

(Optional)

dbase-lsp-subtlv-ip-addr-out

(Optional)

dbase-lsp-extis-bw-out

(Optional)

dbase-lsp-extis-pri1-out

(Optional)

dbase-lsp-extis-pri1-val-out

(Optional)

dbase-lsp-extis-pri2-out

(Optional)

dbase-lsp-extis-pri2-val-out

(Optional)

dbase-lsp-extis-te-metric-out

(Optional)

dbase-lsp-subtlv-len-out

(Optional)

dbase-lsp-subtlv-unknown-out

(Optional)

dbase-lsp-digest-out

(Optional)

dbase-lsp-total-out

(Optional)

dbase-lsp-empty-out

(Optional)

dbase-lsp-zeroseq-out

(Optional)

Command Mode

- /exec

show otv isis ed-summary local

show otv isis [ <otv-isis-tag> ] ed-summary local

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

ed-summary

Display ED Summary Info

local

local

Command Mode

- /exec

show otv isis ed-summary remote

show otv isis [ <otv-isis-tag> ] ed-summary remote [ site-identifier { <site-id-mac> | <site-id-hex> } ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

ed-summary

Display ED Summary Info

remote

remote

site-identifier

(Optional) site-identifier

site-id-mac

(Optional) Site ID in MAC address format

site-id-hex

(Optional) Site ID in hex

Command Mode

- /exec

show otv isis event-history

show otv isis [ <isis-tag> ] [ internal ] event-history { errors | msgs | <isis-event-hist-buf-name> | statistics }

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

isis-tag

(Optional) Routing process tag

internal

(Optional) Commands for internal use

event-history

Display IS-IS event history

errors

Error history

msgs

Message history

isis-event-hist-buf-name

Event history buffer

statistics

Show the state and size of the buffer

Command Mode

- /exec

show otv isis fast-flood

show otv isis [ <otv-isis-tag> ] fast-flood

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

fast-flood

Fast flood the LSP's

Command Mode

- /exec

show otv isis gm-spf-adjacency

show otv isis [ <otv-isis-tag> ] gm-spf-adjacency [ vpn { <vrf-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

gm-spf-adjacency

Display IS-IS GM-SPF adjacency information

Command Mode

- /exec

show otv isis hostname

show otv isis [ <otv-isis-tag> ] hostname [ detail ] [ vpn { <vrf-name> | all } ] [ __readonly__ <tag-out> TABLE_vrf <vrf-name-out> <hname-enabled-out> <hname-detail-out> <hname-level-out> <hname-id-out> <hname-id-mine-out> <hname-name-out> ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

hostname

Display IS-IS hostname table information

detail

(Optional) Display detailed IS-IS information

__readonly__

(Optional)

tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

hname-enabled-out

(Optional)

hname-detail-out

(Optional)

hname-level-out

(Optional)

hname-id-out

(Optional)

hname-id-mine-out

(Optional)

hname-name-out

(Optional)

Command Mode

- /exec

show otv isis interface

show otv isis [ <otv-isis-tag> ] interface [ brief | <interface> ] [ vpn { <vrf-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> [ { TABLE_interface [ { <intfb-name-out> <intfb-type-out> <intfb-ix-out> <intfb-state-out> <intfb-ready-state-out> <intfb-cid-out> <intfb-ckt-type-out> <intfb-mtu-out> [ { <intf-p2p-metric-lvl-1-out> <intf-p2p-prio-lvl-1-out> <intf-p2p-adj-count-lvl-1-out> <intf-p2p-adj-up-count-lvl-1-out> } ] [ { <intf-loopback-metric-lvl-1-out> <intf-loopback-prio-lvl-1-out> <intf-loopback-adj-count-lvl-1-out> <intf-loopback-adj-up-count-lvl-1-out> } ] [ { <intf-bcast-metric-lvl-1-out> <intf-bcast-prio-lvl-1-out> <intf-bcast-adj-count-lvl-1-out> <intf-bcast-adj-up-count-lvl-1-out> } ] } ] [ { <intf-name-out> <intf-status-out> } ] [ { <intf-state-out> <intf-internal-state-out> [ <intf-cib-disabled-out> ] [ <intf-cid-invalid-out> ] } ] [ { <intf-ix-out> <intf-cid-out> <intf-ckt-type-out> } ] [ <intf-passive-mask-out> ] [ <intf-passive-mask-lvl-out> ] [ <intf-mgrp-set-out> ] [ <intf-mgrp-state-out> ] [ <intf-mgrp-id-out> ] [ { TABLE_auth [ { <intf-auth-info-out> [ <intf-auth-kchain-out> ] <intf-auth-chk-info-out> } ] } ] [ <intf-p2p-type-out> ] [ { <intf-p2p-ext-local-cid-out> <intf-p2p-cid-out> <intf-retx-intv-out> <intf-retx-throttle-out> } ] [ <intf-loopback-type-out> ] [ { <intf-lsp-intv-out> <intf-mtu-out> [ <intf-hpad-state-out> ] } ] [ { [ <intf-p2p-pad-ts-out> ] <intf-p2p-adj-count-out> <intf-p2p-adj-up-count-out> <intf-p2p-prio-out> <intf-p2p-hello-intv-out> <intf-p2p-hello-multi-out> <intf-p2p-hello-next-out> [ { TABLE_p2p <intf-p2p-lvl-out> <intf-p2p-adj-lvl-out> <intf-p2p-adj-up-lvl-out> <intf-p2p-metric-lvl-out> <intf-p2p-csnp-lvl-out> <intf-p2p-csnp-nxt-lvl-out> <intf-p2p-lspid-last-lvl-out> } ] } ] [ { <intf-bcast-type-out> [ { TABLE_bcast_pad [ { <intf-bcast-lvl-out> <intf-bcast-pad-ts-out> } ] } ] [ { TABLE_bcast_dis [ { <intf-bcast-lvl-dis-out> <intf-bcast-dis-ts-out> } ] } ] [ { TABLE_bcast_pkt <intf-bcast-lvl-info-out> <intf-bcast-lvl-metric-out> <intf-bcast-lvl-csnp-intv-out> <intf-bcast-lvl-csnp-next-out> <intf-bcast-lvl-iih-intv-out> <intf-bcast-lvl-iih-multi-out> <intf-bcast-lvl-iih-next-out> } ] [ { TABLE_bcast_adj <intf-bcast-lvl-value-out> <intf-bcast-lvl-adj-out> <intf-bcast-lvl-adj-up-out> <intf-bcast-lvl-prio-out> <intf-bcast-lvl-cktid-out> <intf-bcast-lvl-cktid-ts-out> } ] } ] [ { TABLE_loopback <intf-loopback-lvl-out> <intf-loopback-lvl-metric-out> } ] [ <intf-unknown-out> ] } ] } } ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

brief

(Optional) Brief display of IS-IS interfaces

interface

Display IS-IS interface information

interface

(Optional) IS-IS interface

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_interface

(Optional)

intf-status-out

(Optional)

intf-name-out

(Optional)

intf-ix-out

(Optional)

intf-state-out

(Optional)

intf-cid-out

(Optional)

intf-ckt-type-out

(Optional)

intfb-name-out

(Optional)

intfb-type-out

(Optional)

intfb-ix-out

(Optional)

intfb-state-out

(Optional)

intfb-ready-state-out

(Optional)

intfb-cid-out

(Optional)

intfb-ckt-type-out

(Optional)

intf-p2p-metric-lvl-1-out

(Optional)

intf-p2p-prio-lvl-1-out

(Optional)

intf-p2p-adj-count-lvl-1-out

(Optional)

intf-p2p-adj-up-count-lvl-1-out

(Optional)

intf-loopback-metric-lvl-1-out

(Optional)

intf-loopback-prio-lvl-1-out

(Optional)

intf-loopback-adj-count-lvl-1-out

(Optional)

intf-loopback-adj-up-count-lvl-1-out

(Optional)

intf-bcast-metric-lvl-1-out

(Optional)

intf-bcast-prio-lvl-1-out

(Optional)

intf-bcast-adj-count-lvl-1-out

(Optional)

intf-bcast-adj-up-count-lvl-1-out

(Optional)

intf-internal-state-out

(Optional)

intf-cib-disabled-out

(Optional)

intf-cid-invalid-out

(Optional)

intf-passive-mask-out

(Optional)

intf-passive-mask-lvl-out

(Optional)

intf-mgrp-set-out

(Optional)

intf-mgrp-state-out

(Optional)

intf-mgrp-id-out

(Optional)

TABLE_auth

(Optional)

intf-auth-info-out

(Optional)

intf-auth-kchain-out

(Optional)

intf-auth-chk-info-out

(Optional)

intf-p2p-type-out

(Optional)

intf-p2p-ext-local-cid-out

(Optional)

intf-p2p-cid-out

(Optional)

intf-retx-intv-out

(Optional)

intf-retx-throttle-out

(Optional)

intf-loopback-type-out

(Optional)

intf-lsp-intv-out

(Optional)

intf-mtu-out

(Optional)

intfb-mtu-out

(Optional)

intf-hpad-state-out

(Optional)

intf-p2p-pad-ts-out

(Optional)

intf-p2p-adj-count-out

(Optional)

intf-p2p-adj-up-count-out

(Optional)

intf-p2p-prio-out

(Optional)

intf-p2p-hello-intv-out

(Optional)

intf-p2p-hello-multi-out

(Optional)

intf-p2p-hello-next-out

(Optional)

TABLE_p2p

(Optional)

intf-p2p-lvl-out

(Optional)

intf-p2p-adj-lvl-out

(Optional)

intf-p2p-adj-up-lvl-out

(Optional)

intf-p2p-metric-lvl-out

(Optional)

intf-p2p-csnp-lvl-out

(Optional)

intf-p2p-csnp-nxt-lvl-out

(Optional)

intf-p2p-lspid-last-lvl-out

(Optional)

intf-bcast-type-out

(Optional)

TABLE_bcast_pad

(Optional)

intf-bcast-lvl-out

(Optional)

intf-bcast-pad-ts-out

(Optional)

TABLE_bcast_dis

(Optional)

intf-bcast-lvl-dis-out

(Optional)

intf-bcast-dis-ts-out

(Optional)

TABLE_bcast_pkt

(Optional)

intf-bcast-lvl-info-out

(Optional)

intf-bcast-lvl-metric-out

(Optional)

intf-bcast-lvl-csnp-intv-out

(Optional)

intf-bcast-lvl-csnp-next-out

(Optional)

intf-bcast-lvl-iih-intv-out

(Optional)

intf-bcast-lvl-iih-multi-out

(Optional)

intf-bcast-lvl-iih-next-out

(Optional)

TABLE_bcast_adj

(Optional)

intf-bcast-lvl-value-out

(Optional)

intf-bcast-lvl-adj-out

(Optional)

intf-bcast-lvl-adj-up-out

(Optional)

intf-bcast-lvl-prio-out

(Optional)

intf-bcast-lvl-cktid-out

(Optional)

intf-bcast-lvl-cktid-ts-out

(Optional)

TABLE_loopback

(Optional)

intf-loopback-lvl-out

(Optional)

intf-loopback-lvl-metric-out

(Optional)

intf-unknown-out

(Optional)

Command Mode

- /exec

show otv isis internal library-info

show otv isis [ <otv-isis-tag> ] internal library-info

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

internal

Commands for internal use

library-info

Show various event logs of library

Command Mode

- /exec

show otv isis internal mem-stats

show otv isis [ <otv-isis-tag> ] internal mem-stats [ no-libs ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

internal

Commands for internal use

mem-stats

Show memory allocation statistics

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

Command Mode

- /exec

show otv isis internal otv cache

show otv isis [ <otv-isis-tag> ] internal otv cache

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

internal

Commands for internal use

otv

Display OTV information

cache

Displya otv lib cache

Command Mode

- /exec

show otv isis internal packet queue counters

show otv isis [ <otv-isis-tag> ] internal packet queue counters

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

internal

Commands for internal use

packet

Show packet counters

queue

Show packet queue counters

counters

Show packet queue statistics

Command Mode

- /exec

show otv isis internal perf timer

show otv isis [ <otv-isis-tag> ] internal perf timer

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

internal

Commands for internal use

perf

Performance

timer

Timer performance

Command Mode

- /exec

show otv isis internal pss

show otv isis [ <otv-isis-tag> ] internal pss { vrf | site-group | vlan-info | pib |

Syntax Description

Syntax Description

|

adjacency

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

internal

Commands for internal use

pss

Display IS-IS persistent-pool storage data

vrf

VRF information

site-group

Site group data

vlan-info

VLAN Info data

pib

PIB data

Command Mode

- /exec

show otv isis internal vlan

show otv isis [ <otv-isis-tag> ] internal vlan

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

internal

Commands for internal use

vlan

Currently active vlans

Command Mode

- /exec

show otv isis internal vpn tx-members

show otv isis [ <otv-isis-tag> ] internal vpn { <vrf-name> | all } tx-members

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

internal

Commands for internal use

vpn

Display VPN information

vrf-name

VRF name

all

Display information for all VRFs

tx-members

LSP Tx-list members per interface level

Command Mode

- /exec

show otv isis internal vpn txlist nodes

show otv isis [ <otv-isis-tag> ] internal vpn { <vrf-name> | all } txlist { nodes | members }

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

internal

Commands for internal use

vpn

Display VPN information

vrf-name

VRF name

all

Display information for all VRFs

txlist

LSP Tx-list linkage per level

nodes

Node linkage per level

members

Active member linkage per level

Command Mode

- /exec

show otv isis ip mroute

show otv isis [ <otv-isis-tag> ] ip mroute [ vlan <vlan-id> [ group <gip-addr> [ source <sip-addr> ] ] ] [ summary ] [ vpn { <vrf-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

ip

Display IS-IS IPv4 information

mroute

Display IS-IS multicast group information

vlan

(Optional) Display IS-IS VLAN information

vlan-id

(Optional) Display IS-IS VLAN information

group

(Optional) Display IS-IS Group information

source

(Optional) Display IS-IS Source information

gip-addr

(Optional) Display single IP redistribute route

sip-addr

(Optional) Display single IP redistribute route

summary

(Optional) Display route counts

Command Mode

- /exec

show otv isis ip redistribute mroute

show otv isis [ <otv-isis-tag> ] ip redistribute mroute [ vlan <vlan-id> [ group <gip-addr> [ source <sip-addr> ] ] ] [ summary ] [ vpn { <vrf-name> | all } ] [ __readonly__ <tag-out> TABLE_process_tag <process-tag-out> <redist-ipv4-mrouter-vlanid-out> <redist-ipv4-vlanid-out> <redist-ipv4-source-addr-out> <redist-ipv4-group-addr-out> ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

ip

Display IS-IS IPv4 information

redistribute

Display IS-IS redistribute information

vlan

(Optional) Display IS-IS VLAN information

vlan-id

(Optional) Display IS-IS VLAN information

group

(Optional) Display IS-IS Group information

source

(Optional) Display IS-IS Source information

gip-addr

(Optional) Display single IP redistribute route

sip-addr

(Optional) Display single IP redistribute route

mroute

Display IS-IS multicast group information

summary

(Optional) Display route counts

__readonly__

(Optional)

tag-out

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

redist-ipv4-mrouter-vlanid-out

(Optional)

redist-ipv4-vlanid-out

(Optional)

redist-ipv4-source-addr-out

(Optional)

redist-ipv4-group-addr-out

(Optional)

Command Mode

- /exec

show otv isis lsp free-list

show otv isis [ <otv-isis-tag> ] { non-pseudonode | pseudonode { <interface> | orphan } } lsp free-list [ summary ] [ vpn { <vrf-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

non-pseudonode

Display IS-IS non-pseudo-node information

pseudonode

Display IS-IS pseudo-node information

interface

IS-IS interface

orphan

Display orphan LSP information

lsp

Display IS-IS LSP information

free-list

Display free-list information

summary

(Optional) Display LSP count per free-list

Command Mode

- /exec

show otv isis non tlv overflow-list

show otv isis [ <otv-isis-tag> ] { non-pseudonode | pseudonode <interface> } tlv overflow-list [ vpn { <vrf-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

non-pseudonode

Display IS-IS non-pseudo-node information

pseudonode

Display IS-IS pseudo-node information

interface

IS-IS interface

tlv

Display IS-IS TLV information

overflow-list

Display ISIS TLV overflow-list information

Command Mode

- /exec

show otv isis redistribute route

show otv isis [ <otv-isis-tag> ] [ mac ] redistribute route [ summary ] [ direct-mask ] [ vpn { <vrf-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

redistribute

Display IS-IS redistribute information

route

Display ISIS redistribute route

mac

(Optional) Display IS-IS MAC information

summary

(Optional) Display route counts

direct-mask

(Optional) Display routes with direct-mask set

Command Mode

- /exec

show otv isis route-map statistics

show otv isis [ <otv-isis-tag> ] route-map statistics [ vpn { <vrf-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

route-map

Display IS-IS route-map information

statistics

Display IS-IS route-map statistics

Command Mode

- /exec

show otv isis route show otv isis route is

show otv isis [ <otv-isis-tag> ] route [ summary | detail ] [ vpn { <vrf-name> | all } ] | show otv isis [ <otv-isis-tag> ] route is [ vpn { <vrf-name> | all } ] [ __readonly__ <tag-out> TABLE_vrf <vrf-name-out> <afi-safi-out> <route-absent-out> <route-lvl-absent-out> <route-prefix-out> <route-mask-len-out> <route-level-out> <route-summ-discard-addr-out> <route-summ-discard-mask-len-out> <route-discard-addr-out> <route-discard-mask-len-out> <route-addr-print-out> <route-mask-len-print-out> <route-direct-print-out> <route-direct-out> <route-direct-via-out> <route-direct-if-name-out> <route-direct-metric-out> <route-direct-level-out> <route-direct-instance-out> <route-marker-out> <route-addr-valid-out> <route-ifname-out> <route-metric-out> <route-pref-out> <route-no-def-prefix-out> <route-instance-out> <route-discard-mask-out> <route-sum-prefix-out> <route-sum-prefix-len-out> <route-total-out> <route-paths-total-out> <route-paths-best-out> <route-paths-backup-out> <route-sum-lvl-out> <route-sum-total-out> <route-sum-direct-out> <route-sum-normal-out> <route-sum-missing-out> <route-best-pend-num-out> <route-bestpaths-out> <route-backuppaths-out> <route-path-sum-lvl-out> <route-path-sum-total-out> <route-path-sum-direct-out> <route-path-sum-normal-out> <route-bestroutes-per-mask-out> <route-best-mask-val-out> <route-best-mask-count-out> <route-pend-q-count-out> ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

is

Display IS route

route

Display IS-IS route information

summary

(Optional) Display route counts

detail

(Optional) Display detail route information

otv-isis-tag

(Optional)

__readonly__

(Optional)

tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

afi-safi-out

(Optional)

route-absent-out

(Optional)

route-lvl-absent-out

(Optional)

route-prefix-out

(Optional)

route-mask-len-out

(Optional)

route-level-out

(Optional)

route-summ-discard-addr-out

(Optional)

route-summ-discard-mask-len-out

(Optional)

route-discard-addr-out

(Optional)

route-discard-mask-len-out

(Optional)

route-addr-print-out

(Optional)

route-mask-len-print-out

(Optional)

route-direct-print-out

(Optional)

route-direct-out

(Optional)

route-direct-via-out

(Optional)

route-direct-if-name-out

(Optional)

route-direct-metric-out

(Optional)

route-direct-level-out

(Optional)

route-direct-instance-out

(Optional)

route-marker-out

(Optional)

route-addr-valid-out

(Optional)

route-ifname-out

(Optional)

route-metric-out

(Optional)

route-pref-out

(Optional)

route-instance-out

(Optional)

route-no-def-prefix-out

(Optional)

route-discard-mask-out

(Optional)

route-sum-prefix-out

(Optional)

route-sum-prefix-len-out

(Optional)

route-total-out

(Optional)

route-paths-total-out

(Optional)

route-paths-best-out

(Optional)

route-paths-backup-out

(Optional)

route-sum-lvl-out

(Optional)

route-sum-total-out

(Optional)

route-sum-direct-out

(Optional)

route-sum-normal-out

(Optional)

route-sum-missing-out

(Optional)

route-best-pend-num-out

(Optional)

route-bestpaths-out

(Optional)

route-backuppaths-out

(Optional)

route-path-sum-lvl-out

(Optional)

route-path-sum-total-out

(Optional)

route-path-sum-direct-out

(Optional)

route-path-sum-normal-out

(Optional)

route-bestroutes-per-mask-out

(Optional)

route-best-mask-val-out

(Optional)

route-best-mask-count-out

(Optional)

route-pend-q-count-out

(Optional)

Command Mode

- /exec

show otv isis rrm

show otv isis [ <otv-isis-tag> ] rrm [ mgroup ] <interface> [ vpn { <vrf-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

rrm

Display IS-IS Retransmit-Routing-Message information

mgroup

(Optional) Display IS-IS GM Retransmit-Routing-Message information

interface

IS-IS interface

Command Mode

- /exec

show otv isis site-index

show otv isis [ <otv-isis-tag> ] site-index

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

site-index

Display site index table

Command Mode

- /exec

show otv isis site

show otv isis [ <otv-isis-tag> ] site [ statistics ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

site

Display IS-IS OTV site information

statistics

(Optional) Display IS-IS protocol statistics

Command Mode

- /exec

show otv isis spf-adjacency

show otv isis [ <otv-isis-tag> ] spf-adjacency [ vpn { <vrf-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

spf-adjacency

Display IS-IS SPF adjacency information

Command Mode

- /exec

show otv isis spf-log

show otv isis [ <otv-isis-tag> ] spf-log [ detail ] [ vpn { <vrf-name> | all } ] [ __readonly__ <tag-out> TABLE_vrf <vrf-name-out> <spflog-calc-out> <spflog-size-out> <spflog-maxsize-out> <spflog-ago-time-out> <spflog-lvl-out> <spflog-reason-out> <spflog-count-out> <spflog-elapsed-ts-out> <spflog-log-num-out> <spflog-ts-detail-out> <spflog-date-detail-out> <spflog-lvl-detail-out> <spflog-instance-detail-out> <spflog-init-ts-detail-out> <spflog-spf-ts-detail-out> <spflog-detail-ts-is-out> <spflog-detail-ts-urib-out> <spflog-detail-ts-elapsed-out> <spflog-detail-lvl-out> <spflog-detail-spf-cnt-out> <spflog-detail-sync-cnt-out> <spflog-detail-spf-reason-out> ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

spf-log

Display IS-IS SPF information

detail

(Optional) Display detail ISIS SPF information

__readonly__

(Optional)

tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

spflog-calc-out

(Optional)

spflog-size-out

(Optional)

spflog-maxsize-out

(Optional)

spflog-ago-time-out

(Optional)

spflog-lvl-out

(Optional)

spflog-reason-out

(Optional)

spflog-count-out

(Optional)

spflog-elapsed-ts-out

(Optional)

spflog-log-num-out

(Optional)

spflog-ts-detail-out

(Optional)

spflog-date-detail-out

(Optional)

spflog-lvl-detail-out

(Optional)

spflog-instance-detail-out

(Optional)

spflog-init-ts-detail-out

(Optional)

spflog-spf-ts-detail-out

(Optional)

spflog-detail-ts-is-out

(Optional)

spflog-detail-ts-urib-out

(Optional)

spflog-detail-ts-elapsed-out

(Optional)

spflog-detail-lvl-out

(Optional)

spflog-detail-spf-cnt-out

(Optional)

spflog-detail-sync-cnt-out

(Optional)

spflog-detail-spf-reason-out

(Optional)

Command Mode

- /exec

show otv isis srm

show otv isis [ <otv-isis-tag> ] srm [ mgroup ] <interface> [ vpn { <vrf-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

srm

Display IS-IS Send-Routing-Message information

mgroup

(Optional) Display IS-IS GM-Send-Routing-Message information

interface

IS-IS interface

Command Mode

- /exec

show otv isis ssn

show otv isis [ <otv-isis-tag> ] ssn [ mgroup ] <interface> [ vpn { <vrf-name> | all } ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

ssn

Display IS-IS Send-Sequence-Number information

mgroup

(Optional) Display IS-IS GM-Send-Sequence-Number information

interface

IS-IS interface

Command Mode

- /exec

show otv isis statistics

show otv isis [ <otv-isis-tag> ] statistics [ <interface> ] [ vpn { <vrf-name> | all } ] [ __readonly__ <tag-out> TABLE_vrf <vrf-name-out> <stat-if-out> <stat-if-name-out> <stat-spf-calc-out> <stat-lsp-sourced-out> <stat-lsp-refresh-out> <stat-lsp-purge-out> <stat-dis-elections-out> ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

statistics

Display IS-IS protocol statistics

interface

(Optional) IS-IS interface

__readonly__

(Optional)

tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

stat-if-out

(Optional)

stat-if-name-out

(Optional)

stat-spf-calc-out

(Optional)

stat-lsp-sourced-out

(Optional)

stat-lsp-refresh-out

(Optional)

stat-lsp-purge-out

(Optional)

stat-dis-elections-out

(Optional)

Command Mode

- /exec

show otv isis track-adjacency-nexthop

show otv isis [ <otv-isis-tag> ] track-adjacency-nexthop

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

track-adjacency-nexthop

Display IS-IS OTV adjacency nexthop tracking information

Command Mode

- /exec

show otv isis traffic

show otv isis [ <otv-isis-tag> ] traffic [ <interface> ] [ mbuf-priority ] [ vpn { <vrf-name> | all } ] [ __readonly__ { TABLE_process_tag <process-tag-out> { TABLE_vrf <vrf-name-out> <traffic-if-out> [ <traffic-if-name-out> ] <traffic-lan-iih-out> <traffic-lan-iih-rcv-out> <traffic-lan-iih-xmit-out> <traffic-lan-iih-rcv-auth-err-out> <traffic-lan-iih-rcv-err-out> <traffic-csnp-out> <traffic-csnp-rcv-out> <traffic-csnp-xmit-out> <traffic-csnp-rcv-auth-err-out> <traffic-csnp-rcv-err-out> <traffic-psnp-out> <traffic-psnp-rcv-out> <traffic-psnp-xmit-out> <traffic-psnp-rcv-auth-err-out> <traffic-psnp-rcv-err-out> <traffic-lsp-out> <traffic-lsp-rcv-out> <traffic-lsp-flood-out> <traffic-lsp-rcv-auth-err-out> <traffic-lsp-rcv-err-out> <traffic-lsp-rexmit-out> <traffic-gmlsp-out> <traffic-gmlsp-rcv-out> <traffic-gmlsp-flood-out> <traffic-gmlsp-rcv-auth-err-out> <traffic-gmlsp-rcv-err-out> <traffic-gmlsp-rexmit-out> [ <traffic-xmit-err-out> ] [ <traffic-unknown-pdu-rcv-out> ] } } ]

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vpn

(Optional) Display VPN information

vrf-name

(Optional) VPN name

all

(Optional) All configured VPNs

traffic

Display IS-IS traffic information

interface

(Optional) IS-IS interface

mbuf-priority

(Optional) Display mbuf priorities for received PDUs

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

traffic-if-out

(Optional)

traffic-if-name-out

(Optional)

traffic-lan-iih-out

(Optional)

traffic-lan-iih-rcv-out

(Optional)

traffic-lan-iih-xmit-out

(Optional)

traffic-lan-iih-rcv-auth-err-out

(Optional)

traffic-lan-iih-rcv-err-out

(Optional)

traffic-csnp-out

(Optional)

traffic-csnp-rcv-out

(Optional)

traffic-csnp-xmit-out

(Optional)

traffic-csnp-rcv-auth-err-out

(Optional)

traffic-csnp-rcv-err-out

(Optional)

traffic-psnp-out

(Optional)

traffic-psnp-rcv-out

(Optional)

traffic-psnp-xmit-out

(Optional)

traffic-psnp-rcv-auth-err-out

(Optional)

traffic-psnp-rcv-err-out

(Optional)

traffic-lsp-out

(Optional)

traffic-lsp-rcv-out

(Optional)

traffic-lsp-flood-out

(Optional)

traffic-lsp-rcv-auth-err-out

(Optional)

traffic-lsp-rcv-err-out

(Optional)

traffic-lsp-rexmit-out

(Optional)

traffic-gmlsp-out

(Optional)

traffic-gmlsp-rcv-out

(Optional)

traffic-gmlsp-flood-out

(Optional)

traffic-gmlsp-rcv-auth-err-out

(Optional)

traffic-gmlsp-rcv-err-out

(Optional)

traffic-gmlsp-rexmit-out

(Optional)

traffic-xmit-err-out

(Optional)

traffic-unknown-pdu-rcv-out

(Optional)

Command Mode

- /exec

show otv isis vlan-status local

show otv isis [ <otv-isis-tag> ] vlan-status { local | remote }

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

isis

Display IS-IS status and configuration

otv-isis-tag

(Optional) Routing process tag

vlan-status

Display vlan status Info

local

local

remote

remote

Command Mode

- /exec

show otv site

show otv site [ detail | <overlay-if> | vpn <vpn-name> ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

site

Show site-local adjacencies with other edge devices in this site

detail

(Optional) Show all site-local adjacencies incl. overlays not configured on this system

overlay-if

(Optional) Overlay interface

vpn

(Optional) Overlay VPN name

vpn-name

(Optional) OTV VPN Name

Command Mode

- /exec

show otv statistics multicast

show otv statistics multicast <vlan-id>

Syntax Description

Syntax Description

show

Show running system information

otv

Display OTV information

statistics

Display OTV Traffic Stats

multicast

Display Multicast Stats

vlan-id

Vlan ID

Command Mode

- /exec

show otv vlan-mapping

show otv vlan-mapping [ <overlay-if> ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

vlan-mapping

VLAN mapping information

overlay-if

(Optional) Overlay interface

Command Mode

- /exec

show otv vlan

show otv vlan [ { <vlan-range> } ] [ authoritative ] [ detail ] [ <overlay-if> | vpn <vpn-name> ]

Syntax Description

Syntax Description

show

Display OTV information

otv

Configure OTV information

overlay-if

(Optional) Overlay interface

vpn

(Optional) Overlay VPN name

vpn-name

(Optional) OTV VPN Name

vlan

Show extended VLANs including edge device AED status

vlan-range

(Optional) VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19

detail

(Optional) Display each interface in VLAN

authoritative

(Optional) Display each interface in VLAN

Command Mode

- /exec

Chapter 16. P Show Commands

- show param-list

- show password secure-mode

- show password strength-check

- show plb

- show plb

- show plb session device-group

- show plb statistics

- show plb vrf

- show pmap-int-br interface br

- show pmap-int

- show poap internal errors

- show poap internal info

- show poap internal mem-stats

- show poap internal msgs

- show poap internal vsan

- show policy-map

- show policy-map interface control-plane

- show policy-map interface type psp

- show policy-map system

- show policy-map type control-plane

- show policy-map type network-qos

- show policy-map type psp

- show port-channel load-balance

- show port-channel load-balance internal algorithm

- show port-profile

- show port-profile brief

- show port-profile expand-interface

- show port-profile sync-status

- show port-profile usage

- show port-security

- show port-security address

- show port-security address interface

- show port-security interface

- show port-security state

- show private-vlan internal event-history errors

- show private-vlan internal event-history events

- show private-vlan internal event-history traces

- show private-vlan internal info

- show private-vlan internal mem-stats

- show privilege

- show processes

- show processes cpu

- show processes cpu history

- show processes cpu module

- show processes log

- show processes log details

- show processes log pid

- show processes log vdc-all

- show processes memory

- show processes memory clis

- show processes memory shared

- show processes vdc

- show processes vdc cpu

- show processes vdc log

- show processes vdc log details

- show processes vdc log pid

- show processes vdc memory

- show processes version

- show pss debug

- show ptp brief

- show ptp clock

- show ptp clock foreign-masters record

- show ptp corrections

- show ptp counters interface

- show ptp packet-trace

- show ptp parent

- show ptp port interface

- show ptp time-property

show param-list

show param-list [ param-list-name <plistname> ] [ show-instance ] [ __readonly__ <param_list_header_flag> <param_list_name> <param_list_var> <param_list_type> <param_instance_header_flag> <param_instance_name> <param_instance_var> <param_instance_val> ]

Syntax Description

Syntax Description

show

Show running system information

param-list

Show param-list

param-list-name

(Optional) param list name

plistname

(Optional) Enter the name of the param-list

show-instance

(Optional) show instances for the param list

__readonly__

(Optional)

param_list_header_flag

(Optional)

param_list_name

(Optional)

param_list_var

(Optional)

param_list_type

(Optional)

param_instance_header_flag

(Optional)

param_instance_name

(Optional)

param_instance_var

(Optional)

param_instance_val

(Optional)

Command Mode

- /exec

show password secure-mode

show password secure-mode [ __readonly__ { secure_mode <secure_mode_status> } ]

Syntax Description

Syntax Description

show

Show running system information

password

Password for the user

secure-mode

secure mode for changing passwords

__readonly__

(Optional)

secure_mode

(Optional) run time status about xml

secure_mode_status

(Optional) Run time status about secure mode

Command Mode

- /exec

show password strength-check

show password strength-check [ __readonly__ { operation_status <o_status> } ]

Syntax Description

Syntax Description

show

Show running system information

password

Password for the user

strength-check

Strength check of password

__readonly__

(Optional)

operation_status

(Optional) run-time information about password strength-check

o_status

(Optional) operational status of password strength check

Command Mode

- /exec

show plb

show plb <svc-name> [ brief ] [ __readonly__ <is_firstentry> <is_detail> <is_active> <is_firstentry_routemap> <is_firstentry_standby> <is_firstentry_acl> <is_lastentry> [ TABLE_summary <service_name> <probe> <lb_scheme> [ <interface> ] <state> <buckets> [ <reason> ] <vrf_name> <userACL> <peer_status> [ TABLE_device <device_grp> <dg_probe> <dg_probe_port> ] [ TABLE_route_map [ <route_map> ] [ <interface> ] [ <r_status> ] [ <int_track_id> ] ] [ TABLE_vip [ <vip_ip> ] [ <vip_probe> ] [ <vip_port> ] [ <vip_dgname> ] [ <ace_name> ] [ <ace_seq> ] [ <ace_ip> ] [ <ace_protocol> ] [ <ace_port> ] [ TABLE_vip_node [ <vip_node> ] [ <vip_nodev6> ] <vip_config> <vip_weight> <vip_node_probe> <vip_node_probe_port> <vip_node_probe_ip> <vip_status> <vip_track_id> <vip_ip_sla_id> [ TABLE_vip_standby [ <vip_standby_ip> ] [ <vip_standby_ipv6> ] <vip_standby_config> <vip_standby_weight> <vip_standby_probe> <vip_standby_probe_port> <vip_standby_probe_ip> <vip_standby_status> <vip_standby_track_id> <vip_standby_sla_id> ] [ TABLE_vip_acl [ <vip_access_list> ] ] ] ] [ TABLE_node [ <node> ] [ <nodev6> ] <config> <weight> <node_probe> <node_probe_port> <node_probe_ip> <status> <track_id> <ip_sla_id> [ TABLE_standby [ <standby_ip> ] [ <standby_ipv6> ] <standby_config> <standby_weight> <standby_probe> <standby_probe_port> <standby_probe_ip> <standby_status> <standby_track_id> <standby_sla_id> ] [ TABLE_acl [ <access_list> ] ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

plb

PLB service

svc-name

PLB service name

brief

(Optional) brief

__readonly__

(Optional) Read Only

is_firstentry

(Optional)

is_detail

(Optional)

is_active

(Optional)

is_firstentry_routemap

(Optional)

is_firstentry_acl

(Optional)

is_lastentry

(Optional)

is_firstentry_standby

(Optional)

TABLE_summary

(Optional)

service_name

(Optional) service_name

probe

(Optional) probe

lb_scheme

(Optional) lb scheme

interface

(Optional) interface

state

(Optional) state

buckets

(Optional) buckets

reason

(Optional) inactive reason

vrf_name

(Optional) VRF-Name

userACL

(Optional) user access-list

peer_status

(Optional) peer status

TABLE_device

(Optional)

device_grp

(Optional) service device group

dg_probe

(Optional) probe type

dg_probe_port

(Optional) probe port

TABLE_route_map

(Optional)

route_map

(Optional) service route map

interface

(Optional) interface

r_status

(Optional) route map status

int_track_id

(Optional) interface track id

TABLE_vip

(Optional)

vip_ip

(Optional) vip ip

vip_probe

(Optional) vip protocol

vip_port

(Optional) vip port

vip_dgname

(Optional) vip device group

ace_name

(Optional) ace information

ace_seq

(Optional) ace information

ace_ip

(Optional) ace information

ace_protocol

(Optional) ace information

ace_port

(Optional) ace information

TABLE_vip_node

(Optional)

vip_node

(Optional) service node ip

vip_nodev6

(Optional) service node IPv6

vip_config

(Optional) node config

vip_weight

(Optional) node weight

vip_status

(Optional) node status

vip_node_probe

(Optional) node probe type

vip_node_probe_port

(Optional) node probe port

vip_node_probe_ip

(Optional) node probe ip

vip_track_id

(Optional) node track id

vip_ip_sla_id

(Optional) node ip sla id

TABLE_vip_standby

(Optional)

vip_standby_ip

(Optional) standby node ip

vip_standby_ipv6

(Optional) standby node ipv6

vip_standby_config

(Optional) standby node config

vip_standby_weight

(Optional) standby node weight

vip_standby_status

(Optional) standby node status

vip_standby_probe

(Optional) standby node probe type

vip_standby_probe_port

(Optional) standby node probe port

vip_standby_probe_ip

(Optional) standby node probe ip

vip_standby_track_id

(Optional) standby node track id

vip_standby_sla_id

(Optional) standby node sla id

TABLE_vip_acl

(Optional)

vip_access_list

(Optional) access list

TABLE_node

(Optional)

node

(Optional) service node ip

nodev6

(Optional) service node IPv6

config

(Optional) node config

weight

(Optional) node weight

status

(Optional) node status

node_probe

(Optional) node probe type

node_probe_port

(Optional) node probe port

node_probe_ip

(Optional) node probe ip

track_id

(Optional) node track id

ip_sla_id

(Optional) node ip sla id

TABLE_standby

(Optional)

standby_ip

(Optional) standby node ip

standby_ipv6

(Optional) standby node ipv6

standby_config

(Optional) standby node config

standby_weight

(Optional) standby node weight

standby_status

(Optional) standby node status

standby_probe

(Optional) standby node probe type

standby_probe_port

(Optional) standby node probe port

standby_probe_ip

(Optional) standby node probe ip

standby_track_id

(Optional) standby node track id

standby_sla_id

(Optional) standby node sla id

TABLE_acl

(Optional)

access_list

(Optional) access list

Command Mode

- /exec

show plb

show plb [ brief ] [ __readonly__ <is_firstentry> <is_detail> <is_active> <is_firstentry_routemap> <is_firstentry_standby> <is_firstentry_acl> <is_lastentry> [ TABLE_summary <service_name> <probe> <lb_scheme> [ <interface> ] <state> <buckets> [ <reason> ] <vrf_name> <userACL> <peer_status> [ TABLE_device <device_grp> <dg_probe> <dg_probe_port> ] [ TABLE_route_map [ <route_map> ] [ <interface> ] [ <r_status> ] [ <int_track_id> ] ] [ TABLE_vip [ <vip_ip> ] [ <vip_probe> ] [ <vip_port> ] [ <vip_dgname> ] [ TABLE_vip_node [ <vip_node> ] [ <vip_nodev6> ] <vip_config> <vip_weight> <vip_node_probe> <vip_node_probe_port> <vip_node_probe_ip> <vip_status> <vip_track_id> <vip_ip_sla_id> [ TABLE_vip_standby [ <vip_standby_ip> ] [ <vip_standby_ipv6> ] <vip_standby_config> <vip_standby_weight> <vip_standby_probe> <vip_standby_probe_port> <vip_standby_probe_ip> <vip_standby_status> <vip_standby_track_id> <vip_standby_sla_id> ] [ TABLE_vip_acl [ <vip_access_list> ] ] ] ] [ TABLE_node [ <node> ] [ <nodev6> ] <config> <weight> <node_probe> <node_probe_port> <node_probe_ip> <status> <track_id> <ip_sla_id> [ TABLE_standby [ <standby_ip> ] [ <standby_ipv6> ] <standby_config> <standby_weight> <standby_probe> <standby_probe_port> <standby_probe_ip> <standby_status> <standby_track_id> <standby_sla_id> ] [ TABLE_acl [ <access_list> ] ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

plb

PLB service

brief

(Optional) brief

__readonly__

(Optional) Read Only

is_firstentry

(Optional)

is_detail

(Optional)

is_active

(Optional)

is_firstentry_routemap

(Optional)

is_firstentry_acl

(Optional)

is_lastentry

(Optional)

is_firstentry_standby

(Optional)

TABLE_summary

(Optional)

service_name

(Optional) service_name

probe

(Optional) probe

lb_scheme

(Optional) lb scheme

interface

(Optional) interface

state

(Optional) state

buckets

(Optional) buckets

reason

(Optional) inactive reason

vrf_name

(Optional) VRF-Name

userACL

(Optional) user access-list

peer_status

(Optional) peer status

TABLE_device

(Optional)

device_grp

(Optional) service device group

dg_probe

(Optional) device-group probe type

dg_probe_port

(Optional) device-group probe port

TABLE_route_map

(Optional)

route_map

(Optional) service route map

interface

(Optional) interface

r_status

(Optional) route map status

int_track_id

(Optional) interface track id

TABLE_vip

(Optional)

vip_ip

(Optional) vip ip

vip_probe

(Optional) vip protocol

vip_port

(Optional) vip port

vip_dgname

(Optional) vip device group

TABLE_vip_node

(Optional)

vip_node

(Optional) service node ip

vip_nodev6

(Optional) service node IPv6

vip_config

(Optional) node config

vip_weight

(Optional) node weight

vip_status

(Optional) node status

vip_node_probe

(Optional) node probe type

vip_node_probe_port

(Optional) node probe port

vip_node_probe_ip

(Optional) node probe ip

vip_track_id

(Optional) node track id

vip_ip_sla_id

(Optional) node ip sla id

TABLE_vip_standby

(Optional)

vip_standby_ip

(Optional) standby node ip

vip_standby_ipv6

(Optional) standby node ipv6

vip_standby_config

(Optional) standby node config

vip_standby_weight

(Optional) standby node weight

vip_standby_status

(Optional) standby node status

vip_standby_probe

(Optional) standby node probe type

vip_standby_probe_port

(Optional) standby node probe port

vip_standby_probe_ip

(Optional) standby node probe ip

vip_standby_track_id

(Optional) standby node track id

vip_standby_sla_id

(Optional) standby node sla id

TABLE_vip_acl

(Optional)

vip_access_list

(Optional) access list

TABLE_node

(Optional)

node

(Optional) service node ip

nodev6

(Optional) service node IPv6

config

(Optional) node config

weight

(Optional) node weight

status

(Optional) node status

node_probe

(Optional) node probe type

node_probe_port

(Optional) node probe port

node_probe_ip

(Optional) node probe ip

track_id

(Optional) node track id

ip_sla_id

(Optional) node ip sla id

TABLE_standby

(Optional)

standby_ip

(Optional) standby node ip

standby_ipv6

(Optional) standby node ipv6

standby_config

(Optional) standby node config

standby_weight

(Optional) standby node weight

standby_status

(Optional) standby node status

standby_probe

(Optional) standby node probe type

standby_probe_port

(Optional) standby node probe port

standby_probe_ip

(Optional) standby node probe ip

standby_track_id

(Optional) standby node track id

standby_sla_id

(Optional) standby node sla id

TABLE_acl

(Optional)

access_list

(Optional) access list

Command Mode

- /exec

show plb session device-group

show plb session device-group [ <name> ] [ __readonly__ <first_entry> [ TABLE_svc <node> ] ]

Syntax Description

Syntax Description

show

Show running system information

plb

PLB service

session

PLB service session

device-group

PLB service session device-group

name

(Optional) PLB Service session name

__readonly__

(Optional) Read Only

first_entry

(Optional)

TABLE_svc

(Optional)

node

(Optional) node

Command Mode

- /exec

show plb statistics

show plb { <service_name> | all } [ src { <src-ip> | <src-IPv6> } | dst { <dst-ip> | <dst-IPv6> } ] statistics [ brief ] [ __readonly__ <is_firstentry_node> <is_firstentry_acl> <is_for_ace> [ TABLE_nice <service_name> [ <vip> ] [ <ace_seq> ] [ <ace_ip> ] [ <vip_pkt> ] <dev_grp> <node> <node_pkt> [ <acl> ] [ <acl_pkt> ] <mode> <percentage> ] ]

Syntax Description

Syntax Description

show

Show running system information

plb

PLB service

statistics

PLB statistics

brief

(Optional) brief

__readonly__

(Optional) Read Only

is_firstentry_node

(Optional)

is_firstentry_acl

(Optional)

is_for_ace

(Optional)

TABLE_nice

(Optional)

service_name

service_name

all

All PLB services

src

(Optional) Statistics for src ip

src-ip

(Optional) Provide statistics for src ip

dst

(Optional) Statistics for dst ip

dst-ip

(Optional) Provide statistics for dst ip

vip

(Optional) service virtual ip

ace_seq

(Optional) service ACE name and sequence number

ace_ip

(Optional) service ACE ip/mask/prefix

vip_pkt

(Optional) virtual ip pkt_count

dev_grp

(Optional) device group

node

(Optional) service node ip

node_pkt

(Optional) node pkt count

acl

(Optional) access list

acl_pkt

(Optional) acl pkt count

mode

(Optional) Redirect mode

percentage

(Optional) Packet percentage

Command Mode

- /exec

show plb vrf

show plb vrf [ <name> ] [ __readonly__ <first_entry> [ TABLE_svc <service_name> <vrf_name> <vrf_id> ] ]

Syntax Description

Syntax Description

show

Show running system information

plb

PLB service

vrf

PLB service vrf

name

(Optional) PLB Service VRF name

__readonly__

(Optional) Read Only

first_entry

(Optional)

TABLE_svc

(Optional)

service_name

(Optional) plb service name

vrf_name

(Optional) vrf name

vrf_id

(Optional) vrf id

Command Mode

- /exec

show pmap-int-br interface br

show pmap-int-br interface br [ __readonly__ { [ TABLE_ifvlanstr <if-vlan-str> <if-status> [ <in-pmap-qos> ] [ <out-pmap-qos> ] [ <in-pmap-que> ] [ <out-pmap-que> ] ] } ]

Syntax Description

Syntax Description

show

Show running system information

pmap-int-br

Show policy maps

interface

Show service policy on interface

br

Brief report of all policies attached to interfaces

TABLE_ifvlanstr

(Optional) all interfaces xml sessions

if-vlan-str

(Optional) ifindex or vlan id: xml key

__readonly__

(Optional)

if-status

(Optional) Interface/vlan status [active/inactive]: xml key

in-pmap-qos

(Optional) Input QoS Policy-map name: xml key

out-pmap-qos

(Optional) output QoS Policy-map name: xml key

in-pmap-que

(Optional) Input Que Policy-map name: xml key

out-pmap-que

(Optional) Output Que Policy-map name: xml key

Command Mode

- /exec

show pmap-int

show pmap-int { interface [ <iface-list> ] [ input | output ] [ type <qos-or-q> ] |

Syntax Description

Syntax Description

show

Show running system information

pmap-int

Show policy maps

interface

Show service policy on interface

iface-list

(Optional) List of Interface

input

(Optional) Input Service policy

output

(Optional) Output Service policy

type

(Optional) Type of policy

qos-or-q

(Optional)

Command Mode

- /exec

show poap internal errors

show poap internal [ event-history ] errors

Syntax Description

Syntax Description

show

Show running system information

poap

Show information about poap

internal

Show internal poap information

event-history

(Optional) Show various event logs of Poaps

errors

Show error logs of POAP

Command Mode

- /exec

show poap internal info

show poap internal info [ { global | vsan <i0> } ]

Syntax Description

Syntax Description

show

Show running system information

poap

Show information about poap

internal

Show internal poap information

info

Show internal data structure information

global

(Optional) Display poap global info

vsan

(Optional) Enter the vsan id

i0

(Optional)

Command Mode

- /exec

show poap internal mem-stats

show poap internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

poap

Show information about poap

internal

Show internal poap information

mem-stats

Show memory allocation statistics of POAP

detail

(Optional) Show detail memstats for F_Port Server

Command Mode

- /exec

show poap internal msgs

show poap internal [ event-history ] msgs

Syntax Description

Syntax Description

show

Show running system information

poap

Show information about poap

internal

Show internal poap information

event-history

(Optional) Show various event logs of Poaps

msgs

Show various message logs of POAP

Command Mode

- /exec

show poap internal vsan

show poap internal [ event-history ] vsan <i0>

Syntax Description

Syntax Description

show

Show running system information

poap

Show information about poap

internal

Show internal poap information

event-history

(Optional) Show various event logs of Poaps

vsan

vsan id:Enter the vsan number.

i0

Enter vsan id

Command Mode

- /exec

show policy-map

show policy-map [ { [ type qos ] [ <pmap-name-qos> ] } | { type queuing [ <pmap-name-que> ] } ] [ __readonly__ { [ <display-all> ] [ TABLE_pmap <pmap-key> [ <type-spec> ] [ <yqos-or-q> ] [ <options> ] <pmap-name-out> [ <desc> ] [ TABLE_cmap <cmap-key> [ <type-cmap-spec> ] [ <xqos-or-q> ] [ <cmap-name> ] [ TABLE_action <action-key> [ <serv-pol-type> ] [ <serv-pol-name> ] [ <inner> ] [ <dlb-disable> ] [ <cos> ] [ <exp-val-imposition> ] [ <exp-val-topmost> ] [ <dscp-enum> ] [ <dscp> ] [ <prec-enum> ] [ <prec> ] [ <disc-class> ] [ <qos-group> ] [ <tmap-from> ] [ <tmap-to> ] [ <tmap-name> ] [ <avg-rate-type> ] [ <rate-units> ] [ <shape-rate> ] [ <min-rate-type> ] [ <min-rate-units> ] [ <shape-min-rate> ] [ <max-rate-type> ] [ <max-rate-units> ] [ <shape-max-rate> ] [ <rise-threshold-units> ] [ <fall-threshold-units> ] [ <prio-level> ] [ <qlim-param-type> ] [ <qlim-param-val> ] [ <ooo> ] [ <size-units> ] [ <qlim-size> ] [ <qlim-enum-spec> ] [ <rdet-agg> ] [ <rdet-mode> ] [ TABLE_rdet <rdet-key> [ <rdet-values> ] [ <rdet-min-thresh> ] [ <rdet-size-units> ] [ <rdet-max-thresh> ] [ <rdet-drop-prob> ] [ <rdet-weight> ] [ <rdet-cap-average> ] [ <rdet-ecn> ] [ <rdet-burst-opt> ] [ <rdet-mesh-opt> ] ] [ <rdet-nonecn-mode> ] [ TABLE_rdet_nonecn <rdet-nonecn-key> [ <rdet-nonecn-min-thresh> ] [ <rdet-nonecn-size-units> ] [ <rdet-nonecn-max-thresh> ] [ <rdet-nonecn-drop-prob> ] ] [ <afd-mode> ] [ TABLE_afd <afd-key> [ <afd-values> ] [ <afd-queue-desired> ] [ <afd-size-units> ] [ <afd-ecn> ] ] [ <pause> <size-in-bytes> <xoff-bytes> <xon-bytes> ] [ <priority-group-number> ] [ <bw-units> ] [ <bw-rate> ] [ <rem-bw-units> ] [ <rem-bw-rate> ] [ <agg-policer-name> ] [ <cir-spec> ] [ <bc-spec> ] [ <be-spec> ] [ <cir-rate-units> ] [ <cir> ] [ <bc-size-units> ] [ <bc> ] [ <pir-rate-units> ] [ <pir> ] [ <be-size-units> ] [ <be> ] [ <cnf-col-cmap> ] [ <exc-col-cmap> ] [ TABLE_police <police-key> [ <cnf-act> ] [ <exc-act> ] [ <vio-act> ] [ <set-type> ] [ <enum-spec> ] [ <set-val> ] [ <ptmap-from> ] [ <ptmap-to> ] [ <ptmap-name> ] ] ] ] ] } ]

Syntax Description

Syntax Description

show

Show running system information

policy-map

Show policy maps

type

(Optional) Type of the policy-map

qos

(Optional) type qos

queuing

(Optional) type queuing

pmap-name-qos

(Optional) policy map name (type qos)

pmap-name-que

(Optional) policy map name (type queuing)

__readonly__

(Optional)

display-all

(Optional) Display all kinds of class-maps

TABLE_pmap

(Optional) all pmap xml sessions

pmap-key

(Optional) Policy-map name: xml key

TABLE_rdet

(Optional) all WRED sessions

TABLE_rdet_nonecn

(Optional) all WRED non ECN sessions

TABLE_afd

(Optional) all AFD sessions

TABLE_police

(Optional) all police actions

police-key

(Optional) police actions count: xml key

TABLE_cmap

(Optional) all cmap xml sessions

cmap-key

(Optional) Class-map name: xml key

TABLE_action

(Optional) all actions

action-key

(Optional) Actions count: xml key

yqos-or-q

(Optional)

options

(Optional) match-first option

pmap-name-out

(Optional) Policy-map name

desc

(Optional) Description string

cmap-name

(Optional) Class-map name

xqos-or-q

(Optional)

serv-pol-type

(Optional) Type of service policy referred to

serv-pol-name

(Optional) Name of policy-map referred to within this policy-map

type-spec

(Optional) Type of policy-map specified or not

type-cmap-spec

(Optional) Type of class-map specified or not

inner

(Optional) Specifies if tunnel or inner keywords are mentioned

dlb-disable

(Optional) Disable Dynamic Load Balancing

cos

(Optional) IEEE 802.1Q Class of Service value

exp-val-imposition

(Optional) MPLS EXP value of type imposition

exp-val-topmost

(Optional) MPLS EXP calue of type topmost

dscp

(Optional) DSCP in IP(v4) and IPv6 packets

dscp-enum

(Optional)

prec

(Optional) Precedence in IP(v4) and IPv6 packets

prec-enum

(Optional)

disc-class

(Optional) Discard class

qos-group

(Optional) Qos-group

tmap-from

(Optional)

tmap-to

(Optional)

tmap-name

(Optional) Table map name

ptmap-from

(Optional)

ptmap-to

(Optional)

ptmap-name

(Optional) Table map name

avg-rate-type

(Optional) Specifies if average shape rate is specified

rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us

min-rate-type

(Optional) Specifies if minimum shape rate is specified

min-rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us

max-rate-type

(Optional) Specifies if maximum shape rate is specified

max-rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us

cir-rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us, pps

pir-rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us, pps

prio-level

(Optional) Priority if specified

qlim-param-type

(Optional) Type of parameter for qlim - cos/prec/dscp/disc class/qosgrp

qlim-param-val

(Optional) Parameter value for qlimit

qlim-size

(Optional) Queue size for qlimit

size-units

(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc

rdet-size-units

(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc

rdet-nonecn-size-units

(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc

afd-size-units

(Optional) Units of queue size - bytes/kbytes/mbytes

bc-size-units

(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc

be-size-units

(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc

qlim-enum-spec

(Optional) Weather qlimit parameter is specified in enum or not

rdet-mode

(Optional) Random-detect mode

rdet-nonecn-mode

(Optional) Random-detect non-ecn mode

rdet-agg

(Optional) Are the params for aggregate flow

rdet-values

(Optional) List of class-of-service values for random-detect

rdet-drop-prob

(Optional) Random-detect drop probability

rdet-weight

(Optional) Random-detect queue length weight

rdet-cap-average

(Optional) Random-detect cap-average

rdet-ecn

(Optional) Random-detect ECN

rdet-burst-opt

(Optional) Random-detect burst optimized

rdet-mesh-opt

(Optional) Random-detect mesh optimized

rdet-nonecn-drop-prob

(Optional) Random-detect non-ecn drop probability

afd-mode

(Optional) AFD mode

afd-values

(Optional) List of class-of-service values for AFD

afd-ecn

(Optional) AFD ECN

pause

(Optional) Pause value

priority-group-number

(Optional) Priority group value

bw-units

(Optional) Bandwidth units

rem-bw-units

(Optional) Remaining bandwidth units

rem-bw-rate

(Optional) Remaining bandwidth rate

agg-policer-name

(Optional) Aggregate policer name

cir-spec

(Optional) Is CIR keyword specified

bc-spec

(Optional) Is Committed Burst keyword specified

be-spec

(Optional) Is Extended Burst keyword specified

cnf-col-cmap

(Optional) Conforming color class-map name

exc-col-cmap

(Optional) Exceeding color class-map name

enum-spec

(Optional) Is DSCP or PREC enum value specified

cnf-act

(Optional) Conform action (Police)

exc-act

(Optional) Exceed action (Police)

vio-act

(Optional) Violate action (Police)

set-type

(Optional) Type of set in police action

set-val

(Optional) Value of set type in police action

ooo

(Optional) Out-of-Order

Command Mode

- /exec

show policy-map interface control-plane

show policy-map interface control-plane { [ module <slot-no-in> [ class <cmap-name> ] ] | [ class <cmap-name> [ module <slot-no-in> ] ] } [ __readonly__ [ <scale-factor-cmd> ] <pmap-name> [ TABLE_cmap <cmap-key> <cmap-name-out> <opt_any_or_all> [ TABLE_match <match-key> { [ access_grp <acc_grp_name> ] [ redirect <opt_match_redirect> ] [ exception <opt_match_excpt> ] [ protocol <opt_match_protocol> ] } + ] [ <class-off-rate> <class-drop-rate> <class-pkts> <class-bytes> ] [ [ <set_vld_flg> ] { { cos [ inner ] <cos-val> } | { dscp [ tunnel ] <dscp-val> } | { precedence [ tunnel1 ] <prec-val> } } ] [ <threshold> <level> ] [ [ <policer_show_flags> ] [ <cir> <opt_kbps_mbps_gbps_pps_cir> ] [ { percent <cir-perc> } ] [ <bc> <opt_kbytes_mbytes_gbytes_bc> ] [ <pir> <opt_kbps_mbps_gbps_pps_pir> ] [ { percent1 <pir-perc> } ] [ <be> <opt_kbytes_mbytes_gbytes_be> ] ] [ TABLE_slot { <slot-no-out> { [ [ <conform-pkts> ] <conform-bytes> ] [ { <opt_drop_transmit_conform> } | { set-cos-transmit <set-cos-val> } | { set-dscp-transmit <set-dscp-val> } | { set-prec-transmit <set-prec-val> } ] [ { [ [ <exceed-pkts> ] <exceed-bytes> ] { { <opt_drop_transmit_exceed> } | { set dscp1 dscp2 table cir-markdown-map } } } ] { [ [ <violate-pkts> ] <violate-bytes> ] { { <opt_drop_transmit_violate> } | { set1 dscp3 dscp4 table1 pir-markdown-map } } } } } ] ] ]

Syntax Description

Syntax Description

show

Show running system information

policy-map

Show policy maps

interface

Show service policy on interface

control-plane

command is for copp policy

module

(Optional) module number for statistics

class

(Optional) class-name name

cmap-name

(Optional) Name of the class-map

pmap-name

(Optional) Name of the Policy-map

__readonly__

(Optional)

scale-factor-cmd

(Optional) Scale factor command

TABLE_cmap

(Optional) all cmap xml sessions

cmap-key

(Optional) Class-map key : XML output

cmap-name-out

(Optional) Name of the output class-map

opt_any_or_all

(Optional) Enter match-any or match-all

TABLE_match

(Optional) all match xml sessions

match-key

(Optional) Match key : XML output

access_grp

(Optional)

acc_grp_name

(Optional)

redirect

(Optional)

opt_match_redirect

(Optional) Match criteria for redirected packets

exception

(Optional)

opt_match_excpt

(Optional) Match criteria for exception packets

protocol

(Optional)

opt_match_protocol

(Optional) Match criteria for protocol packets

set_vld_flg

(Optional) Set valid flag

cos

(Optional)

inner

(Optional)

cos-val

(Optional) Set cos val

dscp

(Optional)

tunnel

(Optional)

dscp-val

(Optional) Set dscp val

precedence

(Optional)

tunnel1

(Optional)

prec-val

(Optional) Set prec val

policer_show_flags

(Optional) Policer show flags

level

(Optional) syslog severity level

opt_kbps_mbps_gbps_pps_cir

(Optional) Units

percent

(Optional)

opt_kbps_mbps_gbps_pps_pir

(Optional) Units

percent1

(Optional)

opt_kbytes_mbytes_gbytes_bc

(Optional) Units

opt_kbytes_mbytes_gbytes_be

(Optional) Units

TABLE_slot

(Optional) all slot-num : XML output

slot-no-in

(Optional) input slot no

slot-no-out

(Optional) output slot no

opt_drop_transmit_conform

(Optional) Set the action

set-cos-transmit

(Optional)

set-cos-val

(Optional) Conform action cos val

set-dscp-transmit

(Optional)

set-dscp-val

(Optional) Conform action dscp val

set-prec-transmit

(Optional)

set-prec-val

(Optional) Conform action prec val

opt_drop_transmit_exceed

(Optional) Set the action

set

(Optional)

dscp1

(Optional)

dscp2

(Optional)

table

(Optional)

cir-markdown-map

(Optional)

opt_drop_transmit_violate

(Optional) Set the action

set1

(Optional)

dscp3

(Optional)

dscp4

(Optional)

table1

(Optional)

pir-markdown-map

(Optional)

Command Mode

- /exec

show policy-map interface type psp

show policy-map interface { [ <ifnum> ] } type psp { [ <pmap-name> [ client <clienttype> <clientID> ] ] | [ handle <ppf_id> ] } { [ class-map-list { [ <cmap-name-plc> + ] | [ class-map-handle <ppf_id1> + ] } ] } [ __readonly__ { [ <number-of-classes> ] [ <display-all> ] [ TABLE_pmap <pmap-key> <id> <pmap-name-out> [ <desc> ] [ TABLE_cmap <cmap-key> [ <cmap-name-out> ] [ TABLE_interface <interface> <byte-count> ] ] ] } ]

Syntax Description

Syntax Description

show

Show running system information

policy-map

Show policy maps

interface

Show stats for interface

ifnum

(Optional) Interface type and number

type

Type of the policy-map

psp

type psp

pmap-name

(Optional) Policy-map name

client

(Optional) set client type

clienttype

(Optional) cli/onep

clientID

(Optional) client appID

handle

(Optional) Handle

ppf_id

(Optional) PPF ID

class-map-list

(Optional) Class-map list

cmap-name-plc

(Optional) Class-map name

class-map-handle

(Optional) Class-map Handle/s

ppf_id1

(Optional) PPF ID

__readonly__

(Optional)

display-all

(Optional) Display all kinds of policymaps

number-of-classes

(Optional) Total number of classes for which stats are returned

TABLE_pmap

(Optional) all pmap xml sessions

id

(Optional) Policy-map ID

pmap-key

(Optional) Policy-map name: xml key

pmap-name-out

(Optional) Policy-map name

desc

(Optional) Description string

TABLE_cmap

(Optional) all cmap xml sessions

cmap-key

(Optional) Class-map name: xml key

cmap-name-out

(Optional) Class-map name

TABLE_interface

(Optional) all interface xml sessions

interface

(Optional) Interface type and number

byte-count

(Optional) Byte Count Statistic

Command Mode

- /exec

show policy-map system

show policy-map system [ type { network-qos | qos [ input2 ] | queuing [ input | output ] } ] [ __readonly__ { [ <display-all> ] [ <desc> ] [ <xpmap-name> ] [ <xcmap-name> ] [ <cos-list> ] [ <qos-group-list> ] [ <protocol> ] [ <timeout> ] [ <pause> <size-in-bytes> <xoff-bytes> <xon-bytes> ] [ <pfc-cos-list> ] [ <cc> ] [ <thresh-units> ] [ <min-thresh> ] [ <max-thresh> ] [ <drop-prob> ] [ <iod> ] [ <mtu> ] [ <set-cos> ] [ <dpp> ] [ <stat-en-dis-enum> ] [ TABLE_pmap <pmap-key> <pmap-inner-outer> <in-or-out> <yqos-or-q> [ <options> ] <pmap-name> [ <stat-status-enum> ] [ TABLE_cmap <cmap-key> [ <xqos-or-q> ] <match-opts> <cmap-name> [ TABLE_match <match-key> [ <not> ] [ <inner> ] [ <cos-list> ] [ <match-cmap-xqos-or-q> ] [ <match-cmap-opts> ] [ <match-cmap-name> ] ] [ TABLE_action <action-key> [ <set-inner> ] [ <cos> ] [ <serv-pol-type> ] [ <serv-pol-name> ] [ <serv-pol-return-inout> ] [ <rate-units> ] [ <shape-rate> ] [ <min-rate-type> ] [ <min-rate-units> ] [ <shape-min-rate> ] [ <max-rate-type> ] [ <max-rate-units> ] [ <shape-max-rate> ] [ <prio-level> ] [ <qlim-param-type> ] [ <qlim-param-val> ] [ <size-units> ] [ <qlim-size> ] [ <qlim-enum-spec> ] [ <bw-units> ] [ <bw-rate> ] [ <rem-bw-units> ] [ <rem-bw-rate> ] [ <rise-threshold-units> ] [ <fall-threshold-units> ] [ TABLE_rdet <rdet-key> [ <rdet-values> ] [ <rdet-min-thresh> ] [ <rdet-size-units> ] [ <rdet-max-thresh> ] [ <rdet-drop-prob> ] [ <rdet-weight> ] [ <rdet-ecn> ] [ <rdet-cap-average> ] [ <rdet-burst-opt> ] [ <rdet-mesh-opt> ] ] [ TABLE_afd <afd-key> [ <afd-values> ] [ <afd-queue-desired> ] [ <afd-size-units> ] [ <afd-ecn> ] ] [ <pause> <size-in-bytes> <xoff-bytes> <xon-bytes> ] ] ] ] } ]

Syntax Description

Syntax Description

show

Show running system information

policy-map

Show policy maps

type

(Optional) Type of the policy-map

system

Active policy in the system

network-qos

(Optional) type network-qos

qos

(Optional) type qos

input2

(Optional) input policy

queuing

(Optional) type queuing

input

(Optional) input policy

output

(Optional) output policy

__readonly__

(Optional)

display-all

(Optional) Display all network-qos policy-maps

xpmap-name

(Optional) Policy-map name

desc

(Optional) Description string

xcmap-name

(Optional) Class-map name

thresh-units

(Optional) Units of threshold - pkts/bytes/kbytes/mbytes/ms/us/perc

drop-prob

(Optional) Drop Probability at Maximum Threshold value

pause

(Optional) Pause value

pfc-cos-list

(Optional) List of class-of-service values

timeout

(Optional) timeout value

cc

(Optional) congestion control protocol

iod

(Optional) IOD value

mtu

(Optional) MTU value

set-cos

(Optional) Set CoS value

dpp

(Optional) Dynamic Packet Prioritization Class

protocol

(Optional) protocol

cos-list

(Optional) List of class-of-service values

qos-group-list

(Optional) List of qos-group values

TABLE_pmap

(Optional) all pmap xml sessions

pmap-key

(Optional) Policy-map name: xml key

TABLE_cmap

(Optional) all cmap xml sessions

cmap-key

(Optional) Class-map name: xml key

TABLE_action

(Optional) all actions

action-key

(Optional) Actions count: xml key

TABLE_match

(Optional) all match xml sessions

match-key

(Optional) match count: xml key

TABLE_rdet

(Optional) all WRED sessions

TABLE_afd

(Optional) all AFD sessions

stat-en-dis-enum

(Optional)

in-or-out

(Optional)

yqos-or-q

(Optional)

stat-status-enum

(Optional)

options

(Optional) match-first option

pmap-name

(Optional) Policy-map name

pmap-inner-outer

(Optional) Inner or Outer policy-map

serv-pol-return-inout

(Optional) Inner or Outer policy-map

cmap-name

(Optional) Class-map name

xqos-or-q

(Optional)

match-opts

(Optional) Type of match in class-map

match-cmap-xqos-or-q

(Optional)

match-cmap-opts

(Optional) Type of match in class-map

not

(Optional) Negate this match result

inner

(Optional) Specifies if tunnel or inner keywords are mentioned

cos-list

(Optional) List of class-of-service values

match-cmap-name

(Optional) class-map name

serv-pol-type

(Optional) Type of service policy referred to

serv-pol-name

(Optional) Name of policy-map referred to within this policy-map

set-inner

(Optional) Specifies if tunnel or inner keywords are mentioned

cos

(Optional) IEEE 802.1Q Class of Service value

rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us

min-rate-type

(Optional) Specifies if minimum shape rate is specified

min-rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us

max-rate-type

(Optional) Specifies if maximum shape rate is specified

max-rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us

prio-level

(Optional) Priority if specified

qlim-param-type

(Optional) Type of parameter for qlim - cos/prec/dscp/disc class/qosgrp

qlim-param-val

(Optional) Parameter value for qlimit

qlim-size

(Optional) Queue size for qlimit

size-units

(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc

qlim-enum-spec

(Optional) Weather qlimit parameter is specified in enum or not

rdet-size-units

(Optional) Units of queue size - pkts/bytes/kbytes/mbytes/ms/us/perc

afd-size-units

(Optional) Units of queue size - bytes/kbytes/mbytes

bw-units

(Optional) Bandwidth units

rem-bw-units

(Optional) Remaining bandwidth units

rem-bw-rate

(Optional) Remaining bandwidth rate

rdet-values

(Optional) List of class-of-service values for random-detect

rdet-drop-prob

(Optional) Random-detect drop probability

rdet-weight

(Optional) Random-detect queue length weight

rdet-cap-average

(Optional) Random-detect cap-average

rdet-ecn

(Optional) Random-detect ECN

rdet-burst-opt

(Optional) Random-detect burst optimized

rdet-mesh-opt

(Optional) Random-detect mesh optimized

afd-values

(Optional) List of class-of-service values for afd

afd-ecn

(Optional) AFD ECN

pause

(Optional) Pause value

Command Mode

- /exec

show policy-map type control-plane

show policy-map type control-plane [ expand ] [ { name <pmap-name> } ] [ __readonly__ [ { TABLE_pmap <pmap-name1> [ { TABLE_cmap <cmap-name> [ <opt_any_or_all> ] [ TABLE_match <match_key> { [ access_grp <acc_grp_name> ] | [ redirect <opt_match_redirect> ] | [ exception <opt_match_excpt> ] | [ protocol <opt_match_protocol> ] } ] [ { TABLE_set_action <set_vld_flg> { { cos [ inner ] <cos-val> } | { dscp [ tunnel ] <dscp-val> } | { precedence [ tunnel1 ] <prec-val> } } } ] [ <threshold> <level> ] [ [ <policer_show_flags> ] [ <cir> <opt_kbps_mbps_gbps_pps_cir> ] [ percent <cir-perc> ] [ <pir> <opt_kbps_mbps_gbps_pps_pir> ] [ percent1 <pir-perc> ] [ <bc> <opt_kbytes_mbytes_gbytes_bc> ] [ <be> <opt_kbytes_mbytes_gbytes_be> ] [ { <opt_drop_transmit_conform> } | { set-cos-transmit <set-cos-val> } | { set-dscp-transmit <set-dscp-val> } | { set-prec-transmit <set-prec-val> } ] [ { <opt_drop_transmit_exceed> } | { set dscp1 dscp2 table cir-markdown-map } ] [ { <opt_drop_transmit_violate> } | { set1 dscp3 dscp4 table1 pir-markdown-map } ] ] } ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

policy-map

Show policy maps

type

Type of the policy-map

control-plane

command is for copp policy

expand

(Optional) Display the match-criterias along with class-map

name

(Optional) policy-map name

pmap-name

(Optional) Name of the Policy-map

__readonly__

(Optional)

TABLE_pmap

(Optional) Table of policy-map

pmap-name1

(Optional) Name of the Policy-map

TABLE_cmap

(Optional) Table of class-map

cmap-name

(Optional) Name of the class-map

opt_any_or_all

(Optional) Enter match-any or match-all

TABLE_match

(Optional) Table of match statement

match_key

(Optional) Match key : XML output

access_grp

(Optional)

acc_grp_name

(Optional)

redirect

(Optional)

opt_match_redirect

(Optional) Match criteria for redirected packets

exception

(Optional)

opt_match_excpt

(Optional) Match criteria for exception packets

protocol

(Optional)

opt_match_protocol

(Optional) Match criteria for protocol packets

TABLE_set_action

(Optional) Table of set action

set_vld_flg

(Optional) Set valid flag

level

(Optional) syslog severity level

opt_kbps_mbps_gbps_pps_cir

(Optional) Units

percent

(Optional)

opt_kbps_mbps_gbps_pps_pir

(Optional) Units

percent1

(Optional)

opt_kbytes_mbytes_gbytes_bc

(Optional) Units

opt_kbytes_mbytes_gbytes_be

(Optional) Units

opt_drop_transmit_conform

(Optional) Set the action

set-cos-transmit

(Optional)

set-cos-val

(Optional) Conform action cos val

set-dscp-transmit

(Optional)

set-dscp-val

(Optional) Conform action dscp val

set-prec-transmit

(Optional)

set-prec-val

(Optional) Conform action prec val

opt_drop_transmit_exceed

(Optional) Set the action

set

(Optional)

dscp1

(Optional)

dscp2

(Optional)

table

(Optional)

cir-markdown-map

(Optional)

opt_drop_transmit_violate

(Optional) Set the action

set1

(Optional)

dscp3

(Optional)

dscp4

(Optional)

table1

(Optional)

pir-markdown-map

(Optional)

cos

(Optional)

inner

(Optional)

cos-val

(Optional) Set cos val

dscp

(Optional)

tunnel

(Optional)

dscp-val

(Optional) Set dscp val

precedence

(Optional)

tunnel1

(Optional)

prec-val

(Optional) Set prec val

policer_show_flags

(Optional) Policer show flags

Command Mode

- /exec

show policy-map type network-qos

show policy-map type network-qos [ <pmap-name-nq> ] [ __readonly__ { <display-all> <desc> <xpmap-name> <xcmap-name> <pause> <timeout> <size-in-bytes> <xoff-bytes> <xon-bytes> <pfc-cos-list> <cc> <thresh-units> <min-thresh> <max-thresh> <drop-prob> <iod> <mtu> <set-cos> <dpp> } ]

Syntax Description

Syntax Description

show

Show running system information

policy-map

Show policy maps

type

Type of the policy-map

pmap-name-nq

(Optional) Policy-map name

network-qos

type network-qos

__readonly__

(Optional)

display-all

(Optional) Display all network-qos policy-maps

xpmap-name

(Optional) Policy-map name

desc

(Optional) Description string

xcmap-name

(Optional) Class-map name

pause

(Optional) Pause value

timeout

(Optional) timeout value

pfc-cos-list

(Optional) List of class-of-service values

cc

(Optional) congestion control protocol

thresh-units

(Optional) Units of threshold - pkts/bytes/kbytes/mbytes/ms/us/perc

drop-prob

(Optional) Drop Probability at Maximum Threshold value

iod

(Optional) IOD value

mtu

(Optional) MTU value

set-cos

(Optional) Set CoS value

dpp

(Optional) Dynamic Packet Prioritization Class

Command Mode

- /exec

show policy-map type psp

show policy-map type psp { [ <pmap-name> [ client <clienttype> <clientID> ] [ cfg-mode <cfgmode> ] ] | [ handle <ppf_id> ] } [ __readonly__ { [ <display-all> ] [ TABLE_pmap <pmap-key> <id> <pmap-name-out> [ <desc> ] [ TABLE_cmap <cmap-key> <if-else-id> <cmap-id> [ class-default ] [ <cmap-name-out> ] [ TABLE_action <action-key> [ <cos-val> ] [ <src-mac-addr> ] [ <dest-mac-addr> ] [ <vlan-number> ] [ <ip-tos-value> ] [ <interface-name> ] [ action-strip-vlan ] [ action-drop-pkt ] [ divert-action ] [ copy-action ] [ forward-normal ] [ <goto-pmap-handle> ] [ action-decrement-ttl ] ] ] ] } ]

Syntax Description

Syntax Description

show

Show running system information

policy-map

Show policy maps

type

Type of the policy-map

psp

type psp

pmap-name

(Optional) Policy-map name

client

(Optional) set client type

clienttype

(Optional) cli/onep

clientID

(Optional) client appID

cfg-mode

(Optional) cfg-mode

cfgmode

(Optional) persistent/transient

handle

(Optional) Handle

ppf_id

(Optional) PPF ID

__readonly__

(Optional)

display-all

(Optional) Display all kinds of policymaps

TABLE_pmap

(Optional) all pmap xml sessions

id

(Optional) Policy-map ID

pmap-key

(Optional) Policy-map name: xml key

pmap-name-out

(Optional) Policy-map name

desc

(Optional) Description string

TABLE_cmap

(Optional) all cmap xml sessions

cmap-key

(Optional) Class-map name: xml key

if-else-id

(Optional) If-Else ID

cmap-id

(Optional) Class-map ID

class-default

(Optional)

cmap-name-out

(Optional) Class-map name

TABLE_action

(Optional) all action xml sessions

action-key

(Optional) action count: xml key

cos-val

(Optional) 802.1Q Class of Service value

src-mac-addr

(Optional) Layer 2 MAC Address

dest-mac-addr

(Optional) Layer 2 MAC Address

vlan-number

(Optional) VLAN NUMBER

ip-tos-value

(Optional) IPv4 TOS Value

interface-name

(Optional) Physical Interface Name and Number

action-strip-vlan

(Optional) Perform the action STRIP-VLAN-ID

action-drop-pkt

(Optional) Perform the action Drop the Packet

divert-action

(Optional) Divert the packets to Controller

copy-action

(Optional) Copy the packets to Controller

forward-normal

(Optional) Forward the packets normally

goto-pmap-handle

(Optional) Pmap handle

action-decrement-ttl

(Optional) Decrement TTL on the Packet

Command Mode

- /exec

show port-channel load-balance

show port-channel load-balance { [ module <module> ] | { fex { all } } } [ __readonly__ <sys-cfg> { <module-cfg> } + <non-ip-val> <non-ip-sel> <ipv4-val> <ipv4-sel> <ipv6-val> ]

Syntax Description

Syntax Description

show

Show running system information

port-channel

Show port-channel information

load-balance

Show port-channel load balance

module

(Optional) slot

module

(Optional) Specify a module number

fex

FEX devices

all

Display all configured FEX port-channel LB

__readonly__

(Optional)

sys-cfg

(Optional) system wide load balance configuraton

module-cfg

(Optional) per module load balance configuraton

non-ip-val

(Optional) load balance setting for non-ip traffic

non-ip-sel

(Optional) non ip select

ipv4-val

(Optional) load balance setting for ipv4 traffic

ipv4-sel

(Optional) ip select

ipv6-val

(Optional) load balance setting for ipv6 traffic

Command Mode

- /exec

show port-channel load-balance internal algorithm

show port-channel load-balance internal algorithm

Syntax Description

Syntax Description

show

Show running system information

port-channel

Show port-channel information

load-balance

Show port-channel load balance

internal

internal

algorithm

HG port-channel load balance algo

Command Mode

- /exec

show port-profile

show port-profile [ name <all_profile_name> ] [ __readonly__ <profile_name> <profile_id> <type> <desc> <status> <max_ports> <min_ports> <inherit> <profile_cfg> <cmd_depth> <cmd_key> <parent_seqno> <cmd_seqno> <cmd_attr> <form_type> <cmd_mask> <shadow_cmd> <cmd_flags> <eval_cfg> <intf> <cap_l3> <cap_iscsi> <ctrl_sgid> <pkt_sgid> <sys_vlans> <portgrp> <pprole> <port_binding> ]

Syntax Description

Syntax Description

show

Show running system information

port-profile

Show port-profile

name

(Optional) port-profile name

all_profile_name

(Optional) Enter the name of the profile

__readonly__

(Optional)

profile_name

(Optional)

profile_id

(Optional)

type

(Optional)

desc

(Optional)

status

(Optional)

max_ports

(Optional)

min_ports

(Optional)

inherit

(Optional)

profile_cfg

(Optional)

cmd_depth

(Optional)

cmd_key

(Optional)

parent_seqno

(Optional)

cmd_seqno

(Optional)

cmd_attr

(Optional)

form_type

(Optional)

cmd_mask

(Optional)

shadow_cmd

(Optional)

cmd_flags

(Optional)

eval_cfg

(Optional)

intf

(Optional)

cap_l3

(Optional) L3 Profile

cap_iscsi

(Optional) iSCSI cap

ctrl_sgid

(Optional) Control Vlan Pinned Sgid

pkt_sgid

(Optional) Packet Vlan Pinned Sgid

sys_vlans

(Optional) System Vlans

portgrp

(Optional) VMware Portgroup

pprole

(Optional) Port-profile Role

port_binding

(Optional) Port-binding

Command Mode

- /exec

show port-profile brief

show port-profile brief [ __readonly__ { TABLE_port_profile <profile_name> <type> <status> <profile_cfg_cnt> <eval_cfg_cnt> <intf_cnt> <inherit_cnt> <header_flag> } { TABLE_intf_count <intf_type> <intf_count> <tot_header_flag> } ]

Syntax Description

Syntax Description

show

Show running system information

port-profile

Show port-profile

brief

Brief info about profiles

__readonly__

(Optional)

profile_name

(Optional)

TABLE_port_profile

(Optional)

type

(Optional)

status

(Optional)

profile_cfg_cnt

(Optional)

eval_cfg_cnt

(Optional)

intf_cnt

(Optional)

inherit_cnt

(Optional)

header_flag

(Optional)

TABLE_intf_count

(Optional)

intf_type

(Optional)

intf_count

(Optional)

tot_header_flag

(Optional)

Command Mode

- /exec

show port-profile expand-interface

show port-profile expand-interface [ name <all_profile_name> ] [ __readonly__ <profile_name> <intf> <intf_cfg> ]

Syntax Description

Syntax Description

show

Show running system information

port-profile

Show port-profile

expand-interface

Active profile config applied in a interface

name

(Optional) port-profile name

all_profile_name

(Optional) Enter the name of the profile

__readonly__

(Optional)

profile_name

(Optional)

intf

(Optional)

intf_cfg

(Optional)

Command Mode

- /exec

show port-profile sync-status

show port-profile sync-status [ interface <intfname> ] [ __readonly__ <intf> <status> <inherit> <sync_status> <cached_cmds> <errors> <recovery> ]

Syntax Description

Syntax Description

show

Show running system information

port-profile

Show port-profile

sync-status

Interfaces out-of-sync with port-profiles

interface

(Optional) Interface name

intfname

(Optional) Name of interface

__readonly__

(Optional)

intf

(Optional)

status

(Optional)

inherit

(Optional)

sync_status

(Optional)

cached_cmds

(Optional)

errors

(Optional)

recovery

(Optional)

Command Mode

- /exec

show port-profile usage

show port-profile usage [ name <all_profile_name> ] [ __readonly__ TABLE_port_profile <profile_name> { TABLE_interface <interface> } ]

Syntax Description

Syntax Description

show

Show running system information

port-profile

Show port-profile

usage

List of interfaces inherited a profile

name

(Optional) port-profile name

all_profile_name

(Optional) Enter the name of the profile

__readonly__

(Optional)

TABLE_port_profile

(Optional)

TABLE_interface

(Optional)

profile_name

(Optional)

interface

(Optional)

Command Mode

- /exec

show port-security

show port-security [ __readonly__ { TABLE_eth_port_sec_interfaces <secure_port> <max_secure_addr> <current_addr> <security_violation> <security_action> <num_val> <num_elems> <cmdid_show_index> <port_state> } <total_addr> <max_sys_limit> ]

Syntax Description

Syntax Description

port-security

Show secure port information

__readonly__

(Optional)

TABLE_eth_port_sec_interfaces

(Optional) Displays the secured interfaces

secure_port

(Optional) Interface Index

max_secure_addr

(Optional) Maximum number of secured MAC addresses

current_addr

(Optional) Number of secured MAC addresses

security_violation

(Optional) Number of security violations

security_action

(Optional) Security Action Shutdown/Restrict/Protect

num_val

(Optional) Number of Values

num_elems

(Optional) Number of Elements

cmdid_show_index

(Optional) Index for the Interfaces

port_state

(Optional) Port security enabled or disabled

total_addr

(Optional) Total number of secured MAC addresses

max_sys_limit

(Optional) Maximum allowed MACs excluding one per port

Command Mode

- /exec

show port-security address

show port-security address [ __readonly__ { TABLE_eth_port_sec_mac_addrs <vlan_id> <mac_addr> <type> <if_index> <remain_age> <remote_learnt> <remote_aged> <num_elems> <cmd_addr_index> } <total_addr> <max_sys_limit> ]

Syntax Description

Syntax Description

port-security

Show secure port information

address

Show secure address

__readonly__

(Optional)

TABLE_eth_port_sec_mac_addrs

(Optional) Displays the secured MAC addresses

if_index

(Optional) Interface index

vlan_id

(Optional) vlan id

mac_addr

(Optional) mac address

type

(Optional) static/sticky/dyanmic MAC address

remain_age

(Optional) Remaining age

remote_learnt

(Optional) Remotely learnt

remote_aged

(Optional) Remotely Aged Out

num_elems

(Optional) Number of Elements

cmd_addr_index

(Optional) Index for the interface address

total_addr

(Optional) Total number of secured MAC addresses

max_sys_limit

(Optional) Maximum allowed MACs excluding one per port

Command Mode

- /exec

show port-security address interface

show port-security address interface <interface-id> [ __readonly__ { TABLE_eth_port_sec_mac_addrs <vlan_id> <mac_addr> <type> <if_index> <remain_age> <remote_learnt> <remote_aged> <num_elems> } <total_addr> <max_sys_limit> <first> ]

Syntax Description

Syntax Description

port-security

Show secure port information

address

Show secure address

interface

Show secure interface

interface-id

ethernet

__readonly__

(Optional)

TABLE_eth_port_sec_mac_addrs

(Optional) Displays the secured MAC addresses

if_index

(Optional) Interface index

vlan_id

(Optional) vlan id

mac_addr

(Optional) mac address

type

(Optional) static/sticky/dyanmic MAC address

remain_age

(Optional) Remaining age

remote_learnt

(Optional) Remotely learnt

remote_aged

(Optional) Remotely Aged Out

num_elems

(Optional) Number of Elements

total_addr

(Optional) Total number of secured MAC addresses

max_sys_limit

(Optional) Maximum allowed MACs excluding one per port

first

(Optional) To identify the first entry

Command Mode

- /exec

show port-security interface

show port-security interface <interface-id> [ __readonly__ <config_port_security> <oper_port_security> <port_status> <violation_mode> <aging_time> <aging_type> <max_mac_addr> <total_sec_addrs> <conf_num_addrs> <num_sticky_addrs> <trap_count> ]

Syntax Description

Syntax Description

port-security

Show secure port information

interface

Show secure interface

interface-id

ethernet

__readonly__

(Optional)

config_port_security

(Optional) Port Security configuration is Enabled/Disabled

oper_port_security

(Optional) Port Security is Operationally Enabled/Disabled

port_status

(Optional) Secure Up/Down

violation_mode

(Optional) Shutdown/Restrict/Protect

aging_time

(Optional) Aging time in minutes

aging_type

(Optional) Absolute/Inactivity

max_mac_addr

(Optional) Configured Maximum

total_sec_addrs

(Optional) Total number of secured MAC addresses

conf_num_addrs

(Optional) Number of configured MAC addresses

num_sticky_addrs

(Optional) Number of sticky MAC addresses

trap_count

(Optional) Trap Count

Command Mode

- /exec

show port-security state

show port-security state [ __readonly__ <status> ]

Syntax Description

Syntax Description

port-security

Port security related command

state

port security state

__readonly__

(Optional)

status

(Optional) show port-security

Command Mode

- /exec

show private-vlan internal event-history errors

show private-vlan internal event-history errors

Syntax Description

Syntax Description

show

Show running system information

private-vlan

Show information about private VLAN

internal

Show internal information about private VLAN

event-history

Show various event logs of private VLAN

errors

Show internal error logs of private VLAN

Command Mode

- /exec

show private-vlan internal event-history events

show private-vlan internal event-history events

Syntax Description

Syntax Description

show

Show running system information

private-vlan

Show information about private VLAN

internal

Show internal information about private VLAN

event-history

Show various event logs of private VLAN

events

Show internal events of private VLAN

Command Mode

- /exec

show private-vlan internal event-history traces

show private-vlan internal event-history traces

Syntax Description

Syntax Description

show

Show running system information

private-vlan

Show information about private VLAN

internal

Show internal information about private VLAN

event-history

Show various event logs of private VLAN

traces

Show internal traces of private VLAN

Command Mode

- /exec

show private-vlan internal info

show private-vlan internal info [ global | all ]

Syntax Description

Syntax Description

show

Show running system information

private-vlan

Show information about private VLAN

internal

Show internal information about private VLAN

info

Show internal information of private VLAN

global

(Optional) Show global internal information of private VLAN

all

(Optional) Show all internal information of private VLAN

Command Mode

- /exec

show private-vlan internal mem-stats

show private-vlan internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

private-vlan

Show information about private VLAN

internal

Show internal information about private VLAN

mem-stats

Show internal memory statistics of private VLAN

detail

(Optional) Show detailed internal memory statistics of private VLAN

Command Mode

- /exec

show privilege

show privilege

Syntax Description

Syntax Description

show

Show running system information

privilege

Display privilege information

Command Mode

- /exec

show processes

show processes [ __readonly__ { [ TABLE_processes <pid> <state> <pc> <start_cnt> <tty> <p_type> <process> ] } ]

Syntax Description

Syntax Description

show

Show running system information

processes

Show processes

__readonly__

(Optional)

TABLE_processes

(Optional) all process information

pid

(Optional) process id

state

(Optional) process state

pc

(Optional) pc register

start_cnt

(Optional) TBD

tty

(Optional) TBD

p_type

(Optional) process type

process

(Optional) process name

Command Mode

- /exec

show processes cpu

show processes cpu [ sort ] [ __readonly__ { [ TABLE_process_cpu <pid> <runtime> <invoked> <usecs> <onesec> <process> ] [ <user_percent> ] [ <kernel_percent> ] [ <idle_percent> ] } ]

Syntax Description

Syntax Description

show

Show running system information

processes

Show processes

cpu

Show processes CPU Info

sort

(Optional) Show processes CPU Info (Sorted by Cpu Util with time base)

__readonly__

(Optional)

TABLE_process_cpu

(Optional) all process memory

pid

(Optional) process id

runtime

(Optional) Runtime

invoked

(Optional) Invoked

usecs

(Optional) usecs

onesec

(Optional) fivesec

process

(Optional) name of the process

user_percent

(Optional) user

kernel_percent

(Optional) kernel

idle_percent

(Optional) idle

Command Mode

- /exec

show processes cpu history

show processes cpu history

Syntax Description

Syntax Description

show

Show running system information

processes

Show processes

cpu

Show processes CPU Info

history

Show processes CPU Util History

Command Mode

- /exec

show processes cpu module

show processes cpu module <i0> [ __readonly__ { [ TABLE_process_cpu <pid> <runtime> <invoked> <usecs> <onesec> <process> ] [ <user_percent> ] [ <kernel_percent> ] [ <idle_percent> ] } ]

Syntax Description

Syntax Description

show

Show running system information

processes

Show processes

cpu

Show processes CPU Info

module

processes CPU Info

i0

module number

__readonly__

(Optional)

TABLE_process_cpu

(Optional) all process memory

pid

(Optional) process id

runtime

(Optional) Runtime

invoked

(Optional) Invoked

usecs

(Optional) usecs

onesec

(Optional) onesec

process

(Optional) name of the process

user_percent

(Optional) user

kernel_percent

(Optional) kernel

idle_percent

(Optional) idle

Command Mode

- /exec

show processes log

show processes log [ __readonly__ { [ TABLE_processes_log <vdc> <process> <pid> <normal_exit> <stack> <core> <create_time> ] } ]

Syntax Description

Syntax Description

show

Show running system information

processes

Show processes

log

Show information about process logs

__readonly__

(Optional)

TABLE_processes_log

(Optional) all processes log

vdc

(Optional) vdc

process

(Optional) vdc process name

pid

(Optional) pid

normal_exit

(Optional) process exit

stack

(Optional) stack

core

(Optional) core

create_time

(Optional) log create time

Command Mode

- /exec

show processes log details

show processes log details [ __readonly__ { line_in_log_detail <line_in_file> } ]

Syntax Description

Syntax Description

show

Show running system information

processes

Show processes

log

Show information about process logs

details

Show detail of all logs with stack

__readonly__

(Optional)

line_in_log_detail

(Optional)

line_in_file

(Optional) each line

Command Mode

- /exec

show processes log pid

show processes log pid <i0> [ __readonly__ { TABLE_line_in_log_pid <line_in_file> } ]

Syntax Description

Syntax Description

show

Show running system information

processes

Show processes

log

Show information about process logs

pid

Show detail log info about a specific process

i0

pid of the process

__readonly__

(Optional)

TABLE_line_in_log_pid

(Optional)

line_in_file

(Optional) each line

Command Mode

- /exec

show processes log vdc-all

show processes log vdc-all [ __readonly__ { [ TABLE_processes_log_vdc_all <vdc> <process> <pid> <normal_exit> <stack> <core> <create_time> ] } ]

Syntax Description

Syntax Description

TABLE_processes_log_vdc_all

(Optional) all processes log vdc all

show

Show running system information

processes

Show processes

log

Show information about process logs

vdc-all

Show information about process logs in all vdc's

__readonly__

(Optional)

vdc

(Optional) vdc process name

process

(Optional) vdc process name

pid

(Optional) process id

normal_exit

(Optional) process exit

stack

(Optional) stack

core

(Optional) core

create_time

(Optional) log create time

Command Mode

- /exec

show processes memory

show processes memory [ __readonly__ { TABLE_process_memory <mem_pid> <mem_alloc> <mem_limit> <mem_used> <stack_base_ptr> <process> } ]

Syntax Description

Syntax Description

show

Show running system information

processes

Show processes

memory

Show processes Memory Info

__readonly__

(Optional)

TABLE_process_memory

(Optional) all process memory

mem_pid

(Optional) process id

mem_alloc

(Optional) allocated memory

mem_limit

(Optional) memory limit

mem_used

(Optional) memory used

stack_base_ptr

(Optional) stack and base pointer

process

(Optional) name of the process

Command Mode

- /exec

show processes memory clis

show processes memory clis [ shared | private ]

Syntax Description

Syntax Description

show

Show running system information

processes

Display process information

memory

Display memory information

clis

shared

(Optional) Display CLIS shared memory information

private

(Optional) Display CLIS private memory information

Command Mode

- /exec

show processes memory shared

show processes memory shared [ detail | dynamic ] [ __readonly__ TABLE_process_tag [ <process-tag-out> ] [ <process-memory-share-dynamic-component-str> ] [ <process-memory-share-dynamic-shared-memory-str> ] [ <process-memory-share-dynamic-current-size-str> ] [ <process-memory-share-dynamic-max-size-str> ] [ <process-memory-share-dynamic-used-str> ] [ <process-memory-share-component-str> ] [ <process-memory-share-shared-memory-str> ] [ <process-memory-share-size-str> ] [ <process-memory-share-used-str> ] [ <process-memory-share-available-str> ] [ <process-memory-share-ref-str> ] [ <process-memory-share-byte-set-address-str> ] [ <process-memory-share-byte-set-count-str> ] [ <process-memory-share-address-str> ] [ <process-memory-share-kbytes-1-str> ] [ <process-memory-share-kbytes-2-str> ] [ <process-memory-share-kbytes-3-str> ] [ <process-memory-share-count-str> ] [ { TABLE_SMMITEM <process-memory-share-smr-name> } ] [ { TABLE_SHOWPROC <process-memory-share-table-showproc-key> [ { TABLE_SHOWONEDYNAMIC [ <process-memory-share-component> ] [ <process-memory-share-shared-memory> ] [ <process-memory-share-current-size> ] [ <process-memory-share-max-size> ] [ <process-memory-share-used> ] } ] [ { TABLE_ONEITEM [ <process-memory-share-proc-smr-name> ] [ <process-memory-share-smr-addr> ] [ <process-memory-share-smr-size> ] [ <process-memory-share-smr-star-char> ] [ <process-memory-share-smr-empty-char> ] [ <process-memory-share-smr-used> ] [ <process-memory-share-smr-avail> ] [ <process-memory-share-smr-ref-count> ] [ <process-memory-share-dynamic-smr-name> ] } ] [ { TABLE_ONEITEMDYNAMIC [ <process-memory-share-dynamic-smr-addr> ] [ <process-memory-share-dynamic-smr-size> ] [ <process-memory-share-dynamic-plus-char> ] [ <process-memory-share-max-mem-size-str> ] [ <process-memory-share-dynamic-smr-used> ] [ <process-memory-share-dynamic-smr-avail> ] [ <process-memory-share-dynamic-smr-ref-count> ] [ <process-memory-share-region-smr-name> ] } ] } ] [ <process-memory-share-total-shm-size> ] [ <process-memory-share-total-shm-used> ] [ <process-memory-share-total-shm-avail> ] ]

Syntax Description

Syntax Description

show

Show running system information

processes

Display process information

memory

Display memory information

shared

Display shared memory info

detail

(Optional) Display shared memory in bytes instead of default kbytes

dynamic

(Optional) Display details of dynamic shared memory segments

__readonly__

(Optional)

TABLE_process_tag

(Optional)

process-tag-out

(Optional)

process-memory-share-dynamic-component-str

(Optional)

process-memory-share-dynamic-shared-memory-str

(Optional)

process-memory-share-dynamic-current-size-str

(Optional)

process-memory-share-dynamic-max-size-str

(Optional)

process-memory-share-dynamic-used-str

(Optional)

process-memory-share-component-str

(Optional)

process-memory-share-shared-memory-str

(Optional)

process-memory-share-size-str

(Optional)

process-memory-share-used-str

(Optional)

process-memory-share-available-str

(Optional)

process-memory-share-ref-str

(Optional)

process-memory-share-byte-set-address-str

(Optional)

process-memory-share-byte-set-count-str

(Optional)

process-memory-share-address-str

(Optional)

process-memory-share-kbytes-1-str

(Optional)

process-memory-share-kbytes-2-str

(Optional)

process-memory-share-kbytes-3-str

(Optional)

process-memory-share-count-str

(Optional)

TABLE_SMMITEM

(Optional)

process-memory-share-smr-name

(Optional)

TABLE_SHOWPROC

(Optional)

process-memory-share-table-showproc-key

(Optional)

TABLE_SHOWONEDYNAMIC

(Optional)

process-memory-share-component

(Optional)

process-memory-share-shared-memory

(Optional)

process-memory-share-current-size

(Optional)

process-memory-share-max-size

(Optional)

process-memory-share-used

(Optional)

TABLE_ONEITEM

(Optional)

process-memory-share-proc-smr-name

(Optional)

process-memory-share-smr-addr

(Optional)

process-memory-share-smr-size

(Optional)

process-memory-share-smr-star-char

(Optional)

process-memory-share-smr-empty-char

(Optional)

process-memory-share-smr-used

(Optional)

process-memory-share-smr-avail

(Optional)

process-memory-share-smr-ref-count

(Optional)

TABLE_ONEITEMDYNAMIC

(Optional)

process-memory-share-dynamic-smr-name

(Optional)

process-memory-share-dynamic-smr-addr

(Optional)

process-memory-share-dynamic-smr-size

(Optional)

process-memory-share-dynamic-plus-char

(Optional)

process-memory-share-max-mem-size-str

(Optional)

process-memory-share-dynamic-smr-used

(Optional)

process-memory-share-dynamic-smr-avail

(Optional)

process-memory-share-dynamic-smr-ref-count

(Optional)

process-memory-share-region-smr-name

(Optional)

process-memory-share-total-shm-size

(Optional)

process-memory-share-total-shm-used

(Optional)

process-memory-share-total-shm-avail

(Optional)

Command Mode

- /exec

show processes vdc

show processes vdc <e-vdc2>

Syntax Description

Syntax Description

show

Show running system information

processes

Show processes

vdc

Show processes in vdc

e-vdc2

Enter Virtual Device Context <vdc-id>

Command Mode

- /exec

show processes vdc cpu

show processes vdc <e-vdc2> cpu

Syntax Description

Syntax Description

show

Show running system information

processes

Show processes

vdc

Show processes in vdc

e-vdc2

Enter Virtual Device Context <vdc-id>

cpu

Show processes CPU Info

Command Mode

- /exec

show processes vdc log

show processes vdc <e-vdc2> log

Syntax Description

Syntax Description

show

Show running system information

processes

Show processes

vdc

Show processes in vdc

e-vdc2

Enter Virtual Device Context <vdc-id>

log

Show information about process logs

Command Mode

- /exec

show processes vdc log details

show processes vdc <e-vdc2> log details

Syntax Description

Syntax Description

show

Show running system information

processes

Show processes

vdc

Show processes in vdc

e-vdc2

Enter Virtual Device Context <vdc-id>

log

Show information about process logs

details

Show detail of all logs with stack

Command Mode

- /exec

show processes vdc log pid

show processes vdc <e-vdc2> log pid <i1>

Syntax Description

Syntax Description

show

Show running system information

processes

Show processes

vdc

Show processes in vdc

e-vdc2

Enter Virtual Device Context <vdc-id>

log

Show information about process logs

pid

Show detail log info about a specific process

i1

pid of the process

Command Mode

- /exec

show processes vdc memory

show processes vdc <e-vdc2> memory [ __readonly__ { [ TABLE_process_memory <mem_pid> <mem_alloc> <mem_limit> <mem_used> <stack_base_ptr> <process> ] [ <sum_mem_malloced> ] } ]

Syntax Description

Syntax Description

show

Show running system information

processes

Show processes

vdc

Show processes in vdc

e-vdc2

Enter Virtual Device Context <vdc-id>

memory

Show processes Memory Info

__readonly__

(Optional)

TABLE_process_memory

(Optional) all process memory

mem_pid

(Optional) process id

mem_alloc

(Optional) allocated memory

mem_limit

(Optional) memory limit

mem_used

(Optional) memory used

stack_base_ptr

(Optional) stack and base pointer

process

(Optional) name of the process

Command Mode

- /exec

show processes version

show processes { version | threads } [ <comp-string> ] [ __readonly__ TABLE_component <component-name> <version> <buildinfo> <sourceversion> ]

Syntax Description

Syntax Description

show

Show running system information

processes

Display process information

version

Display system release information

threads

Threads Info

comp-string

(Optional) Component name for detailed information

__readonly__

(Optional)

TABLE_component

(Optional)

component-name

(Optional)

version

(Optional)

buildinfo

(Optional)

sourceversion

(Optional)

Command Mode

- /exec

show pss debug

show pss debug

Syntax Description

Syntax Description

show

Show running system information

pss

display pss information

debug

display pss debug configuration

Command Mode

- /exec

show ptp brief

show ptp brief [ __readonly__ { TABLE_ptp <ptp-ifindex> <state> } <ptp-end> ]

Syntax Description

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

brief

port states in brief

__readonly__

(Optional) Read Only

TABLE_ptp

(Optional) ptp table

ptp-ifindex

(Optional) ptp ifindex

ptp-end

(Optional) End of table

state

(Optional) BMC state

Command Mode

- /exec

show ptp clock

show ptp clock [ __readonly__ <clock-id> <domain-id> <num-ports> <priority1> <priority2> <class> <accuracy> <scaled-log-variance> <offset-from-master> <mean-path-delay-to-master> <steps-removed> ]

Syntax Description

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

clock

Set local clock attributes

__readonly__

(Optional) Read only

domain-id

(Optional) Domain Id

clock-id

(Optional) Clock Id

priority1

(Optional) Priority 1

priority2

(Optional) Priority 2

num-ports

(Optional) Number of PTP ports

class

(Optional) Class

accuracy

(Optional) Clock accuracy

scaled-log-variance

(Optional) scaled log variance

offset-from-master

(Optional) Offset from master

mean-path-delay-to-master

(Optional) mean path delay to master

steps-removed

(Optional) Steps removed

Command Mode

- /exec

show ptp clock foreign-masters record

show ptp clock foreign-masters record [ interface <if0> ] [ __readonly__ { TABLE_ptp <interface-name> <clock-id> <priority1> <priority2> <class> <accuracy> <scaled-log-variance> <steps-removed> <is-gm> } <ptp-end> ]

Syntax Description

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

clock

Set local clock attributes

foreign-masters

foreign-masters

record

record

if0

(Optional)

__readonly__

(Optional) Read only

TABLE_ptp

(Optional) ptp table

interface-name

(Optional) interface name

clock-id

(Optional) Clock Id

priority1

(Optional) Priority 1

priority2

(Optional) Priority 2

class

(Optional) Class

accuracy

(Optional) Clock accuracy

scaled-log-variance

(Optional) scaled log variance

steps-removed

(Optional) Steps removed

is-gm

(Optional) Is Grandmaster

ptp-end

(Optional) End of table

Command Mode

- /exec

show ptp corrections

show ptp corrections [ __readonly__ { TABLE_ptp <intf-name> <sup-time> <correction-val> <mean-path-delay> } <ptp-end> ]

Syntax Description

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

__readonly__

(Optional) Read Only

corrections

Display last few corrections

TABLE_ptp

(Optional) ptp table

intf-name

(Optional) interface name

sup-time

(Optional) sup time

correction-val

(Optional) correction value

ptp-end

(Optional) End of table

Command Mode

- /exec

show ptp counters interface

show ptp counters { interface <if0> | all } [ { detail | ipv4 <ip> } ] [ __readonly__ [ TABLE_ptp <interface_name> <accepted-ip> <tx-announce-pkts> <rx-announce-pkts> <tx-sync-pkts> <rx-sync-pkts> <tx-follow-up-pkts> <rx-follow-up-pkts> <tx-delay-req-pkts> <rx-delay-req-pkts> <tx-delay-resp-pkts> <rx-delay-resp-pkts> <tx-pdelay-req-pkts> <rx-pdelay-req-pkts> <tx-pdelay-resp-pkts> <rx-pdelay-resp-pkts> <tx-pdelay-follow-up-pkts> <rx-pdelay-follow-up-pkts> <tx-mgmt-pkts> <rx-mgmt-pkts> ] <ptp-end> ]

Syntax Description

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

__readonly__

(Optional) Read Only

counters

Display PTP packet counters

interface

Enter the port interface

all

Displays all information

if0

detail

(Optional) Show detail

ipv4

(Optional) IP address for the stat info

ip

(Optional) IPv4 address (A.B.C.D)

TABLE_ptp

(Optional) ptp table

interface_name

(Optional) interface name

accepted-ip

(Optional) Accepted IP in unicast mode

ptp-end

(Optional) End of table

Command Mode

- /exec

show ptp packet-trace

show ptp packet-trace [ __readonly__ { TABLE_ptp <intf-name> <sup-time> <pkt_dir> <pkt_type> <pkt_info> } <ptp-header> <ptp-end> ]

Syntax Description

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

__readonly__

(Optional) Read Only

packet-trace

Display last few pkt traces

TABLE_ptp

(Optional) ptp table

intf-name

(Optional) interface name

sup-time

(Optional) sup time

pkt_dir

(Optional) pkt_dir

pkt_type

(Optional) pkt_type

pkt_info

(Optional) pkt_info

ptp-header

(Optional) Start of table

ptp-end

(Optional) End of table

Command Mode

- /exec

show ptp parent

show ptp parent [ __readonly__ <clock-id> <port-num> <obs-parent-offset> <obs-parent-clk-phase-chg> <parent-ip> <gm-id> <gm-class> <gm-accuracy> <gm-scaled-log-variance> <gm-priority1> <gm-priority2> ]

Syntax Description

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

parent

parent clock

__readonly__

(Optional) Read only

clock-id

(Optional) Clock Id

port-num

(Optional) Port ID: port number

obs-parent-offset

(Optional) observed parent offset

obs-parent-clk-phase-chg

(Optional) observed parent clock phase change

parent-ip

(Optional) Parent clock IP

gm-id

(Optional) Grandmaster Id

gm-class

(Optional) Class

gm-accuracy

(Optional) Clock accuracy

gm-scaled-log-variance

(Optional) scaled log variance

gm-priority1

(Optional) GM Priority 1

gm-priority2

(Optional) GM Priority 2

Command Mode

- /exec

show ptp port interface

show ptp port interface <if0> [ __readonly__ <intf-name> <clock-id> <port-num> <version> <transport-mode> <accepted-ip> <state> <vlan> <delay-req-intv> <ann-rx-tout> <peer-mean-path-delay> <ann-intv> <sync-intv> <delay-mechanism> <peer-delay-req-intv> ]

Syntax Description

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

port

port

interface

Enter the port interface

if0

__readonly__

(Optional) Read only

intf-name

(Optional) interface name

clock-id

(Optional) Port ID: Clock Id

port-num

(Optional) Port ID: port number

version

(Optional) version

transport-mode

(Optional) Transport mode

accepted-ip

(Optional) Accepted IPs

state

(Optional) BMC state

vlan

(Optional) Vlan

delay-req-intv

(Optional) log mean delay req interval

ann-rx-tout

(Optional) announce receipt timeout

peer-mean-path-delay

(Optional) peer mean path delay

ann-intv

(Optional) announce interval

sync-intv

(Optional) sync interval

delay-mechanism

(Optional) delay mechanism

peer-delay-req-intv

(Optional) peer delay req interval

Command Mode

- /exec

show ptp time-property

show ptp time-property [ __readonly__ <current-utc-offset-valid> <current-utc-offset> <leap-59> <leap-61> <time-traceable> <freq-traceable> <ptp-timescale> <time-source> ]

Syntax Description

Syntax Description

ptp

Precision Time Protocol (IEEE 1588) Subsystem

time-property

time property

__readonly__

(Optional) Read only

current-utc-offset-valid

(Optional) current_utc_offset_valid

current-utc-offset

(Optional) current_utc_offset

leap-59

(Optional) leap-59

leap-61

(Optional) leap-61

time-traceable

(Optional) time-traceable

freq-traceable

(Optional) freq-traceable

ptp-timescale

(Optional) ptp-timescale

time-source

(Optional) time-source

Command Mode

- /exec

Chapter 17. Q Show Commands

- show qos dcbxp incompatibility interface

- show qos dcbxp info

- show qos shared-policer

- show queuing

- show queuing1

- show queuing burst-detect

- show queuing internal snmp interface

- show queuing internal snmp interface cos

- show queuing pfc-queue

- show queuing pfc-queue interface snmp watchdogIfQueueTable ifIndex

- show queuing pfc-queue snmp ifIndex

- show queuing tabular

- show queuing tah-pfc-queue

show qos dcbxp incompatibility interface

show qos dcbxp incompatibility interface <iface-num> [ __readonly__ { <pfc> <mtu> <lpg> <rpg> <bw> <lfcoe> <rfcoe> <liscsi> <riscsi> } ]

Syntax Description

Syntax Description

show

Show running system information

dcbxp

DCBXP

incompatibility

incompatibility information

interface

incompatibility info for interface

iface-num

Interface

__readonly__

(Optional)

pfc

(Optional) pfc

mtu

(Optional) MTU Value

lpg

(Optional) Local Priority Grouping

rpg

(Optional) Remote Priority Grouping

bw

(Optional) CIN: bandwidth/priority

lfcoe

(Optional) local fcoe

rfcoe

(Optional) remote fcoe

liscsi

(Optional) local iscsi

riscsi

(Optional) remote iscsi

Command Mode

- /exec

show qos dcbxp info

show qos dcbxp info [ __readonly__ { <intf> <pfcr> <pfcc> <pgr> <pgc> <mtur> <mtuc> <fcoer> <fcoec> <iscsir> <iscsic> } ]

Syntax Description

Syntax Description

show

Show running system information

dcbxp

DCBXP

info

information

__readonly__

(Optional)

intf

(Optional) Interface

pfcr

(Optional) pfc recvd

pfcc

(Optional) pfc compatible

pgr

(Optional) pg received

pgc

(Optional) pg compatible

mtur

(Optional) mtu received

mtuc

(Optional) mtu compatible

fcoer

(Optional) fcoe received

fcoec

(Optional) fcoe compatible

iscsir

(Optional) iscsi received

iscsic

(Optional) iscsi compatible

Command Mode

- /exec

show qos shared-policer

show qos shared-policer [ type qos1 ] [ <policer-name> ] [ __readonly__ { [ TABLE_policer <policer-name2> [ <cir-spec> ] [ <bc-spec> ] [ <be-spec> ] [ <cir-rate-units> ] [ <cir> ] [ <bc-size-units> ] [ <bc> ] [ <pir-rate-units> ] [ <pir> ] [ <be-size-units> ] [ <be> ] [ <cnf-col-cmap> ] [ <exc-col-cmap> ] [ TABLE_action <action-key> [ <cnf-act> ] [ <exc-act> ] [ <vio-act> ] [ <set-type> ] [ <enum-spec> ] [ <set-val> ] [ <tmap-from> ] [ <tmap-to> ] [ <tmap-name> ] ] ] } ]

Syntax Description

Syntax Description

show

Show running system information

shared-policer

Shared policer

type

(Optional) Type of shared policer

qos1

(Optional) type qos

policer-name

(Optional) Shared policer name

__readonly__

(Optional)

TABLE_policer

(Optional) all police xml sessions

policer-name2

(Optional) Policer Name

TABLE_action

(Optional) all police actions xml sessions

action-key

(Optional) Count

cir-spec

(Optional) Is CIR keyword specified

bc-spec

(Optional) Is Committed Burst keyword specified

be-spec

(Optional) Is Extended Burst keyword specified

cir-rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us, pps

pir-rate-units

(Optional) Units of rate - bps, kbps, mbps, gbps, ms, us, pps

bc-size-units

(Optional) Units of size - pkts/bytes/kbytes/mbytes/ms/us/perc

be-size-units

(Optional) Units of size - pkts/bytes/kbytes/mbytes/ms/us/perc

tmap-from

(Optional)

tmap-to

(Optional)

tmap-name

(Optional) Table map name

cnf-col-cmap

(Optional) Conforming color class-map name

exc-col-cmap

(Optional) Exceeding color class-map name

enum-spec

(Optional) Is DSCP or PREC enum value specified

cnf-act

(Optional) Conform action (Police)

exc-act

(Optional) Exceed action (Police)

vio-act

(Optional) Violate action (Police)

set-type

(Optional) Type of set in police action

set-val

(Optional) Value of set type in police action

Command Mode

- /exec

show queuing

show queuing [ interface <if_list> ] [ summary ] [ module <module> ] [ __readonly__ [ TABLE_queuing_interface <if_name_str> <dir> [ TABLE_qosgrp_cfg <qosgrp> [ <bandwidth> ] [ <priority> ] [ <shape-min> ] [ <shape-max> ] [ <shape-units> ] [ <buffer-size> ] [ <pause-threshold> ] [ <resume-threshold> ] [ <q-limit> ] [ <q-limit-type> ] ] [ TABLE_qosgrp_egress_stats <eq-qosgrp> [ TABLE_qosgrp_egress_stats_entry <eq-stat-type> <eq-stat-units> <eq-uc-stat-value> <eq-oobfc-uc-stat-value> <eq-mc-stat-value> ] ] [ TABLE_ingress_stats_entry <ip-stat-type> <ip-stat-units> <ip-stat-value> ] [ TABLE_egress_stats_entry <ep-stat-type> <ep-stat-units> <ep-stat-value> ] [ <tx-ppp> <rx-ppp> [ TABLE_pfc_stats <cos> [ <pfc-qosgrp> ] [ <pfc-pg> ] <tx-pause-state> <tx-pause-count> <rx-pause-state> <rx-pause-count> ] ] ] ]

Syntax Description

Syntax Description

show

commands to display

queuing

Queuing related information

interface

(Optional) Interface for displaying queuing config

if_list

(Optional) List of interfaces

module

(Optional) Slot/module

module

(Optional) Slot/module number

summary

(Optional) summary

__readonly__

(Optional)

if_name_str

(Optional) interface name

dir

(Optional) Direction

TABLE_queuing_interface

(Optional) Queuing information of an interface

TABLE_qosgrp_cfg

(Optional) Qos-group configuration

qosgrp

(Optional) Qos-group value

bandwidth

(Optional) WRR bandwidth

priority

(Optional) Priority level

shape-units

(Optional) Shape units

q-limit

(Optional) Queue limit

q-limit-type

(Optional) Queue limit type (S-Static, D-Dynamic, U-Unlimited)

TABLE_ingress_stats_entry

(Optional) Ingress port statistics

ip-stat-type

(Optional) Ingress port statistics type

ip-stat-units

(Optional) Ingress port statistics units

TABLE_qosgrp_egress_stats

(Optional) Qos-group egress statistics

eq-qosgrp

(Optional) Qos-group value

TABLE_qosgrp_egress_stats_entry

(Optional) Qos-group egress statistics entry

eq-stat-type

(Optional) Qos-group egress statistics type

eq-stat-units

(Optional) Qos-group egress statistics units

TABLE_egress_stats_entry

(Optional) Egress port statistics

ep-stat-type

(Optional) Egress port statistics type

ep-stat-units

(Optional) Egress port statistics units

TABLE_pfc_stats

(Optional) Per COS PFC statistics

cos

(Optional) PFC COS

pfc-qosgrp

(Optional) Qos-group of the given COS

pfc-pg

(Optional) PG of the given COS/Qos-group

tx-pause-state

(Optional) Tx PFC state of the given COS

rx-pause-state

(Optional) Rx PFC state of the given COS

Command Mode

- /exec

show queuing1

show queuing1 [ interface <if_list> ] [ summary ] [ module <module> ] [ __readonly__ [ TABLE_queuing_interface <if_name_str> <dir> [ TABLE_qosgrp_cfg <qosgrp> [ <bandwidth> ] [ <priority> ] [ <shape-min> ] [ <shape-max> ] [ <shape-units> ] [ <buffer-size> ] [ <pause-threshold> ] [ <resume-threshold> ] [ <q-limit> ] [ <q-limit-type> ] ] [ TABLE_qosgrp_egress_stats <eq-qosgrp> [ TABLE_qosgrp_egress_stats_entry <eq-stat-type> <eq-stat-units> <eq-uc-stat-value> <eq-oobfc-uc-stat-value> <eq-mc-stat-value> ] ] [ TABLE_ingress_stats_entry <ip-stat-type> <ip-stat-units> <ip-stat-value> ] [ TABLE_egress_stats_entry <ep-stat-type> <ep-stat-units> <ep-stat-value> ] [ <tx-ppp> <rx-ppp> [ TABLE_pfc_stats <cos> [ <pfc-qosgrp> ] [ <pfc-pg> ] <tx-pause-state> <tx-pause-count> <rx-pause-state> <rx-pause-count> ] ] ] ]

Syntax Description

Syntax Description

show

commands to display

queuing1

Queuing related information

interface

(Optional) Interface for displaying queuing config

if_list

(Optional) List of interfaces

module

(Optional) Slot/module

module

(Optional) Slot/module number

summary

(Optional) summary

__readonly__

(Optional)

if_name_str

(Optional) interface name

dir

(Optional) Direction

TABLE_queuing_interface

(Optional) Queuing information of an interface

TABLE_qosgrp_cfg

(Optional) Qos-group configuration

qosgrp

(Optional) Qos-group value

bandwidth

(Optional) WRR bandwidth

priority

(Optional) Priority level

shape-units

(Optional) Shape units

q-limit

(Optional) Queue limit

q-limit-type

(Optional) Queue limit type (S-Static, D-Dynamic, U-Unlimited)

TABLE_ingress_stats_entry

(Optional) Ingress port statistics

ip-stat-type

(Optional) Ingress port statistics type

ip-stat-units

(Optional) Ingress port statistics units

TABLE_qosgrp_egress_stats

(Optional) Qos-group egress statistics

eq-qosgrp

(Optional) Qos-group value

TABLE_qosgrp_egress_stats_entry

(Optional) Qos-group egress statistics entry

eq-stat-type

(Optional) Qos-group egress statistics type

eq-stat-units

(Optional) Qos-group egress statistics units

TABLE_egress_stats_entry

(Optional) Egress port statistics

ep-stat-type

(Optional) Egress port statistics type

ep-stat-units

(Optional) Egress port statistics units

TABLE_pfc_stats

(Optional) Per COS PFC statistics

cos

(Optional) PFC COS

pfc-qosgrp

(Optional) Qos-group of the given COS

pfc-pg

(Optional) PG of the given COS/Qos-group

tx-pause-state

(Optional) Tx PFC state of the given COS

rx-pause-state

(Optional) Rx PFC state of the given COS

Command Mode

- /exec

show queuing burst-detect

show queuing burst-detect [ interface <if_name> [ queue <queue_num> ] ] [ module <module> ] [ detail ] [ __readonly__ [ TABLE_instance [ <if-str> ] [ <queue> ] [ <pipe> ] [ <threshold> ] [ <start-time> ] [ <peak> ] [ <peak-time> ] [ <end-depth> ] [ <end-time> ] [ <duration> ] ] ]

Syntax Description

Syntax Description

show

commands to display

queuing

Queuing related information

burst-detect

Out of Band micro-burst queue statistics

interface

(Optional) Interface

if_name

(Optional) interface name

queue

(Optional) Queue number for displaying statistics

queue_num

(Optional) Queue number

module

(Optional) Slot/module

module

(Optional) Slot/module number

detail

(Optional) detailed statistics

if-str

(Optional) Interface name

__readonly__

(Optional) Read Only

TABLE_instance

(Optional) Instance

queue

(Optional) Queue Number

pipe

(Optional) XPE-A or XPE-B

threshold

(Optional) Threshold value in bytes

start-time

(Optional) Start time of burst

peak

(Optional) Peak depth in bytes

peak-time

(Optional) Peak time of burst

end-depth

(Optional) End depth in bytes

end-time

(Optional) End time of burst

duration

(Optional) Duration of burst

Command Mode

- /exec

show queuing internal snmp interface

show queuing internal snmp interface <ifx-in> [ __readonly__ [ TABLE_pfc_stats <ifx-out> <rx-ppp> <tx-ppp> ] ]

Syntax Description

Syntax Description

show

Commands to display

queuing

Queuing related information

internal

Internal command

interface

Interface for displaying queuing config

snmp

snmp

ifx-in

Interface to display info

__readonly__

(Optional)

TABLE_pfc_stats

(Optional) PFC stats

ifx-out

(Optional) Interface index

rx-ppp

(Optional) rx-ppp

tx-ppp

(Optional) tx-ppp

Command Mode

- /exec

show queuing internal snmp interface cos

show queuing internal snmp interface cos <ifx-in> <grp-in> [ __readonly__ [ TABLE_pfc_cos_stats <ifx-out> <grp-out> <rx-stats> <tx-stats> ] ]

Syntax Description

Syntax Description

show

Commands to display

queuing

Queuing related information

internal

Internal command

interface

Interface for displaying queuing config

snmp

snmp

cos

Per port per group stats

ifx-in

Interface to display info

grp-in

priority group

__readonly__

(Optional)

TABLE_pfc_cos_stats

(Optional) PFC cos stats

ifx-out

(Optional) Interface index

grp-out

(Optional) Priority group

rx-stats

(Optional) rx-stats

tx-stats

(Optional) tx-stats

Command Mode

- /exec

show queuing pfc-queue

show queuing pfc-queue [ interface <if_list> ] [ module <module> ] [ detail ] [ __readonly__ <glb-wd-status> <glb-wd-timer> <glb-wd-timer-thresh> <glb-auto-restore> <glb-fixed-restore> <glb-int-intf-multi> [ TABLE_queuing_interface <if_name_str> [ TABLE_qosgrp_stats <eq-qosgrp> [ TABLE_qosgrp_stats_entry <q-stat-type> <q-shutdown> <q-restored> <q-pkt-drained> <q-pkt-dropped> <q-pkt-drained-n-dropped> <q-aggr-pkt-dropped> <q-ing-pkt-dropped> <q-ing-aggr-pkt-dropped> ] ] [ TABLE_qosgrp_stats_summary <qosgrp-summary> ] ] ]

Syntax Description

Syntax Description

show

commands to display

queuing

Queuing related information

pfc-queue

PFC Queuing related information

interface

(Optional) Interface for displaying queuing config

if_list

(Optional) List of interfaces

module

(Optional) Slot/module

module

(Optional) Slot/module number

detail

(Optional) Show detailed PFC Queuing WD information

__readonly__

(Optional)

glb-wd-status

(Optional) Global watch-dog timer status

glb-wd-timer

(Optional) Global watch-dog timer value in msec

glb-wd-timer-thresh

(Optional) Global watch-dog timer thresh value in ms

glb-auto-restore

(Optional) Global auto restore multiplier value

glb-fixed-restore

(Optional) Global fixed restore multiplier value

glb-int-intf-multi

(Optional) Global internal interface multiplier value

if_name_str

(Optional) interface name

TABLE_queuing_interface

(Optional) Queuing information of an interface

TABLE_qosgrp_stats

(Optional) Qos-group egress statistics

eq-qosgrp

(Optional) Qos-group value

TABLE_qosgrp_stats_entry

(Optional) Qos-group egress statistics entry

q-stat-type

(Optional) Queue stat

TABLE_qosgrp_stats_summary

(Optional) Qos-group egress statistics summary

qosgrp-summary

(Optional) Qos-group summary value

Command Mode

- /exec

show queuing pfc-queue interface snmp watchdogIfQueueTable ifIndex

show queuing pfc-queue interface snmp watchdogIfQueueTable ifIndex <ifindex> [ __readonly__ [ TABLE_watchdogIfQueueTable <ifindex> [ TABLE_qosgrp_stats <eq-qosgrp> <state> <shutdowns> <restores> <dropPkts> <totaldropPkts> <ingDropPkts> <totalIngDropPkts> ] ] ]

Syntax Description

Syntax Description

show

commands to display

queuing

Queuing related information

pfc-queue

PFC Queuing related information

interface

Interface for displaying queuing config

snmp

commands for snmp

watchdogIfQueueTable

Table

ifIndex

port ifIndex

ifindex

interfaces ifIndex

__readonly__

(Optional)

TABLE_watchdogIfQueueTable

(Optional) PFC Queuing information of an interface

ifindex

(Optional) interface ifindex

TABLE_qosgrp_stats

(Optional) Qos-group egress statistics

eq-qosgrp

(Optional) Qos-group value

state

(Optional) Queue state

shutdowns

(Optional) Number of times queue is shutdown

restores

(Optional) Number of times queue is restored

dropPkts

(Optional) Total Number of packets drained + dropped since last shutdown

totaldropPkts

(Optional) Number of aggregate packets dropped during shutdowns

ingDropPkts

(Optional) Total Number of packets dropped in the ingress direction since last shutdown

totalIngDropPkts

(Optional) Number of aggregate packets dropped in the ingress direction during shutdowns

Command Mode

- /exec

show queuing pfc-queue snmp ifIndex

show queuing pfc-queue snmp ifIndex <ifidx> [ __readonly__ TABLE-cpfcWatchdogIfQueueInfoTable <ifidx_out> <queueno_out> <q-state> <q-shutdown> <q-restored> <q-pkt-dropped> <q-aggr-pkt-dropped> <q-ing-pkt-dropped> <q-ing-aggr-pkt-dropped> ]

Syntax Description

Syntax Description

show

Show running system information

queuing

Queuing related information

pfc-queue

PFC Queuing related information

snmp

Snmp information

ifIndex

Interface index

ifidx

Index

__readonly__

(Optional) Read Only

TABLE-cpfcWatchdogIfQueueInfoTable

(Optional) SNMP table

ifidx_out

(Optional) Interface index out

queueno_out

(Optional) Queue number out

q-state

(Optional) Queue state

q-shutdown

(Optional) Number of times queue is shutdown

q-restored

(Optional) Number of times queue is restored

q-pkt-dropped

(Optional) Number of packets dropped since last shutdown

q-aggr-pkt-dropped

(Optional) Number of aggregate packets dropped

q-ing-pkt-dropped

(Optional) Number of Ingress packets dropped

q-ing-aggr-pkt-dropped

(Optional) Number of aggregate Ingress packets dropped

Command Mode

- /exec

show queuing tabular

show queuing tabular [ non-zero [ drop-only ] ] [ interface <if_list> ] [ module <module> ] [ __readonly__ [ TABLE_queuing_interface <if_name_str> <qos_group_name_0> <qos_group_name_1> <qos_group_name_2> <qos_group_name_3> <qos_group_name_4> <qos_group_name_5> <qos_group_name_6> <qos_group_name_7> <qos_group_name_cpu> <qos_group_name_span> <tx_uc_pkt_qos_0> <tx_uc_byte_qos_0> <tx_uc_drop_pkt_qos_0> <tx_uc_drop_byte_qos_0> <tx_oobfc_uc_pkt_qos_0> <tx_oobfc_uc_byte_qos_0> <tx_oobfc_uc_drop_pkt_qos_0> <tx_oobfc_uc_drop_byte_qos_0> <tx_fld_pkt_qos_0> <tx_fld_byte_qos_0> <tx_fld_drop_pkt_qos_0> <tx_fld_drop_byte_qos_0> <tx_mc_pkt_qos_0> <tx_mc_byte_qos_0> <tx_mc_drop_pkt_qos_0> <tx_mc_drop_byte_qos_0> <pfc_rx_qos_0> <pfc_tx_qos_0> <qos_grp_1> <qos_grp_2> <qos_grp_3> <qos_grp_4> <qos_grp_5> <qos_grp_6> <qos_grp_7> <qos_grp_cpu> <qos_grp_span> <ing_drop_pkt> ] ]

Syntax Description

Syntax Description

show

commands to display

queuing

Queuing related information

tabular

QoS stats in tabular form

non-zero

(Optional) Interface for non-zero stats

drop-only

(Optional) Interface for non-zero drop-only stats

interface

(Optional) Interface for displaying queuing config

if_list

(Optional) List of interfaces

module

(Optional) Slot/module

module

(Optional) Slot/module number

__readonly__

(Optional)

if_name_str

(Optional) interface name

TABLE_queuing_interface

(Optional) Queuing information of an interface

qos_group_name_0

(Optional) QoS Group name

qos_group_name_1

(Optional) QoS Group name

qos_group_name_2

(Optional) QoS Group name

qos_group_name_3

(Optional) QoS Group name

qos_group_name_4

(Optional) QoS Group name

qos_group_name_5

(Optional) QoS Group name

qos_group_name_6

(Optional) QoS Group name

qos_group_name_7

(Optional) QoS Group name

qos_group_name_cpu

(Optional) QoS Group name

qos_group_name_span

(Optional) QoS Group name

Command Mode

- /exec

show queuing tah-pfc-queue

show queuing tah-pfc-queue [ interface <if_list> ] [ module <module> ] [ detail ] [ __readonly__ [ TABLE_queuing_interface <if_name_str> [ TABLE_qosgrp_stats <eq-qosgrp> [ TABLE_qosgrp_stats_entry <q-stat-type> <q-shutdown> <q-restored> <q-pkt-drained> <q-pkt-dropped> <q-total-pkt-dropped> <q-aggr-pkt-dropped> <q-ingr-pkt-dropped> <q-aggr-ingr-pkt-dropped> ] ] [ TABLE_qosgrp_stats_summary <qosgrp-summary> ] ] ]

Syntax Description

Syntax Description

show

commands to display

queuing

Queuing related information

tah-pfc-queue

PFC Queuing related information

interface

(Optional) Interface for displaying queuing config

if_list

(Optional) List of interfaces

module

(Optional) Slot/module

module

(Optional) Slot/module number

detail

(Optional) Show detailed PFC Queuing WD information

__readonly__

(Optional)

if_name_str

(Optional) interface name

TABLE_queuing_interface

(Optional) Queuing information of an interface

TABLE_qosgrp_stats

(Optional) Qos-group egress statistics

eq-qosgrp

(Optional) Qos-group value

TABLE_qosgrp_stats_entry

(Optional) Qos-group egress statistics entry

q-stat-type

(Optional) Queue stat

TABLE_qosgrp_stats_summary

(Optional) Qos-group egress statistics summary

qosgrp-summary

(Optional) Qos-group summary value

Command Mode

- /exec

Chapter 18. R Show Commands

- show radius-cfs

- show radius-server

- show radius-server

- show radius-server directed-request

- show radius-server groups

- show radius-server sorted

- show radius-server statistics

- show radius status

- show redundancy status

- show regexp

- show resource

- show resource internal event-history errors

- show resource internal event-history msgs

- show resource internal info

- show resource internal mem-stats

- show rmon

- show role

- show role feature-group

- show role feature

- show rollback log exec

- show rollback status

- show route-map

- show route-map pbr-statistics

- show routing-context

- show routing-privilege

- show routing clients

- show routing event-history

- show routing hash

- show routing hidden-nh

- show routing internal

- show routing internal library-info

- show routing internal mem-stats

- show routing internal pending-routes

- show routing internal statistics

- show routing ip

- show routing ipv6

- show routing ipv6 clients

- show routing ipv6 event-history

- show routing ipv6 hash

- show routing ipv6 hidden-nh

- show routing ipv6 internal

- show routing ipv6 internal buffers

- show routing ipv6 internal distribution

- show routing ipv6 internal distribution rnh

- show routing ipv6 internal library-info

- show routing ipv6 internal mem-stats

- show routing ipv6 internal statistics

- show routing ipv6 internal ufdm

- show routing ipv6 memory estimate

- show routing ipv6 memory statistics

- show routing ipv6 nexthop info

- show routing ipv6 nhlfe

- show routing ipv6 recursive-next-hop

- show routing memory estimate

- show routing memory statistics

- show routing nhlfe

- show routing recursive-next-hop

- show routing unresolved-next-hop

- show routing vxlan-hash peer-ip

- show running-config

- show running-config aaa

- show running-config aclmgr

- show running-config aclmgr active

- show running-config adjmgr

- show running-config all

- show running-config amt

- show running-config arp

- show running-config bfd

- show running-config bgp

- show running-config bloggerd

- show running-config callhome

- show running-config catena

- show running-config cdp

- show running-config cert-enroll

- show running-config cfs

- show running-config clock_manager

- show running-config config-profile

- show running-config controller

- show running-config copp

- show running-config dhcp

- show running-config diagnostic

- show running-config diff

- show running-config dot1x

- show running-config ecp

- show running-config eem

- show running-config eigrp

- show running-config eltm

- show running-config evb

- show running-config exclude

- show running-config expand-port-profile

- show running-config explicit

- show running-config fabric forwarding

- show running-config glbp

- show running-config hsrp

- show running-config icam

- show running-config icmpv6

- show running-config igmp

- show running-config imp

- show running-config interface

- show running-config interface

- show running-config interface defaults

- show running-config interface explicit

- show running-config ip

- show running-config ipqos

- show running-config ipqos active

- show running-config ipv6

- show running-config isis

- show running-config l3vm

- show running-config ldap

- show running-config license

- show running-config lisp

- show running-config lldp

- show running-config macsec

- show running-config mmode

- show running-config monitor

- show running-config mpls ldp

- show running-config mpls static

- show running-config mpls strip

- show running-config mpls traffic-eng

- show running-config msdp

- show running-config nat

- show running-config nbm

- show running-config netflow

- show running-config ngoam

- show running-config ntp

- show running-config nv overlay

- show running-config nxsdk

- show running-config openflow

- show running-config ospf

- show running-config ospfv3

- show running-config otv-isis

- show running-config otv

- show running-config param-list

- show running-config pim

- show running-config pim6

- show running-config plb-services

- show running-config port-profile

- show running-config port-security

- show running-config ptp

- show running-config radius

- show running-config res_mgr

- show running-config rip

- show running-config rpm

- show running-config rsvp

- show running-config section

- show running-config security

- show running-config services

- show running-config services

- show running-config sflow

- show running-config sla responder

- show running-config sla sender

- show running-config smart-channel

- show running-config snmp

- show running-config spanning-tree

- show running-config switch

- show running-config tacacs

- show running-config telemetry

- show running-config track

- show running-config udld

- show running-config vdc-all

- show running-config vdc

- show running-config virtual-service

- show running-config vlan

- show running-config vlan

- show running-config vmtracker

- show running-config vpc

- show running-config vrf

- show running-config vrf default

- show running-config vrrp

- show running-config vrrpv3

- show running-config vshd

show radius-cfs

show radius-cfs [ __readonly__ [ <distr_status> ] [ <session_status> ] [ <session_db> ] [ <merge_status> ] ]

Syntax Description

Syntax Description

show

Show running system information

radius-cfs

Show radius cfs state

__readonly__

(Optional)

distr_status

(Optional) radius distribution status

session_status

(Optional) current session status

session_db

(Optional) status of session db

merge_status

(Optional) radius merge status

Command Mode

- /exec

show radius-server

show radius-server [ __readonly__ [ <global_secretKey> ] { <global_timeout> <retransmissionCount> <global_deadtime> } [ <global_source_intf> ] [ <global_idle_time> ] { [ <global_testUsername> ] [ <global_testPassword> ] } { <server_count> } [ TABLE_server <server_ip> [ <auth_port> ] [ <acct_port> ] [ <secretKey> ] [ <timeout> ] [ <retries> ] ] [ { <host0> <auth_port> <acct_port> <shared_key> <idle_time><test_username> <test_password> } + ] ]

Syntax Description

Syntax Description

show

Show running system information

radius-server

Show RADIUS configuration information

__readonly__

(Optional)

global_secretKey

(Optional) Global shared secret

global_timeout

(Optional) Global timeout for tacacs

retransmissionCount

(Optional) Retransmittion count when there is no server response

global_deadtime

(Optional) Global deadtime

global_source_intf

(Optional) Radius global source interface

global_idle_time

(Optional) Radius global idle-time for server monitoring

global_testUsername

(Optional) Username of global test parameters

global_testPassword

(Optional) Password of global test parameters

server_count

(Optional) Total number of radius servers configured

TABLE_server

(Optional)

server_ip

(Optional) Ip address of the server

auth_port

(Optional) Authentication port used for this server

acct_port

(Optional) Accounting Port used for this server

secretKey

(Optional) Shared secret between the server and the tacacs client

timeout

(Optional) Timeout for this tacacs server

retries

(Optional) Retry count for individual servers

host0

(Optional) DNS name or IP address

auth_port

(Optional) RADIUS server's port for authentication

acct_port

(Optional) RADIUS server's port for accounting

shared_key

(Optional) RADIUS shared secret

test_password

(Optional) User password in test packets

Command Mode

- /exec

show radius-server

show radius-server { <host0> } [ __readonly__ { <host1> } <auth_port> <acct_port> <shared_key> <idle_time><test_username> <test_password> ]

Syntax Description

Syntax Description

show

Show running system information

radius-server

Show RADIUS configuration information

host0

DNS name or IP address

__readonly__

(Optional)

host1

(Optional) DNS name or IP address

auth_port

(Optional) RADIUS server's port for authentication

acct_port

(Optional) RADIUS server's port for accounting

shared_key

(Optional) RADIUS shared secret

test_password

(Optional) User password in test packets

Command Mode

- /exec

show radius-server directed-request

show radius-server directed-request [ __readonly__ { <radius_directedRequest_status> } ]

Syntax Description

Syntax Description

show

Show running system information

radius-server

Show RADIUS configuration information

directed-request

Show directed server enable configuration

__readonly__

(Optional)

radius_directedRequest_status

(Optional) status of radius-server directed request

Command Mode

- /exec

show radius-server groups

show radius-server groups [ <s0> ] [ __readonly__ [ <num_of_groups> ] TABLE_group <group_name> [ TABLE_server <server_ip> [ <auth_port> ] [ <acct_port> ] ] [ <dead_time> ] [ <vrf_name> ] [ <source_interface> ] ]

Syntax Description

Syntax Description

show

Show running system information

radius-server

Show RADIUS configuration information

groups

Show RADIUS server group configuration information

s0

(Optional) RADIUS server group name

__readonly__

(Optional)

num_of_groups

(Optional) number of groups

TABLE_group

(Optional)

group_name

(Optional) name of the group

TABLE_server

(Optional)

server_ip

(Optional) DNS name or IP address

auth_port

(Optional) radius server authentication port

acct_port

(Optional) radius server accounting port

dead_time

(Optional) Time interval for which the server is marked as dead before sendinga test command

vrf_name

(Optional) name of the vrf

source_interface

(Optional) Interface Description

Command Mode

- /exec

show radius-server sorted

show radius-server sorted [ __readonly__ [ <global_secretKey> ] { <global_timeout> <retransmissionCount> <global_deadtime> } [ <global_source_intf> ] [ <global_idle_time> ] { [ <global_testUsername> ] [ <global_testPassword> ] } { <server_count> } [ TABLE_server <server_ip> [ <auth_port> ] [ <acct_port> ] [ <secretKey> ] [ <timeout> ] [ <retries> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

radius-server

Show RADIUS configuration information

sorted

Show RADIUS servers sorted by name

__readonly__

(Optional)

global_secretKey

(Optional) Global shared secret

global_timeout

(Optional) Global timeout for tacacs

retransmissionCount

(Optional) Retransmittion count when there is no server response

global_deadtime

(Optional) Global deadtime

global_source_intf

(Optional) Radius global source interface

global_idle_time

(Optional) Radius global idle-time for server monitoring

global_testUsername

(Optional) Username of global test parameters

global_testPassword

(Optional) Password of global test parameters

server_count

(Optional) Total number of radius servers configured

TABLE_server

(Optional)

server_ip

(Optional) Ip address of the server

auth_port

(Optional) Authentication port used for this server

acct_port

(Optional) Accounting Port used for this server

secretKey

(Optional) Shared secret between the server and the tacacs client

timeout

(Optional) Timeout for this tacacs server

retries

(Optional) Retry count for individual servers

Command Mode

- /exec

show radius-server statistics

show radius-server statistics <host0> [ __readonly__ { <server_state> [ <clock_time> { monitoring_statistics <time_in_pstate> <ndead> <tt_in_dstate> } ] } { { auth_statistics <auth_failed_transactions> <auth_succ_transactions> <auth_req_sent> <auth_req_timedout> <auth_resp_no_match> <auth_resp_not_processed> <auth_resp_error> } { acct_statistics <acct_failed_transactions> <acct_succ_transactions> <acct_req_sent> <acct_req_timedout> <acct_resp_no_match> <acct_resp_not_processed> <acct_resp_error> } } ]

Syntax Description

Syntax Description

show

Show running system information

radius-server

Show RADIUS configuration information

statistics

Show RADIUS statistics

host0

DNS name or IP address

__readonly__

(Optional)

server_state

(Optional) Show state of server

clock_time

(Optional) Show clock time in terms of hours, minutes and seconds

monitoring_statistics

(Optional) Monitoring Statistics

time_in_pstate

(Optional) Time in previous state

ndead

(Optional) Number of times dead

tt_in_dstate

(Optional) Total time in dead state

auth_statistics

(Optional) Authentication Statistics

acct_statistics

(Optional) Accounting Statistics

auth_failed_transactions

(Optional) Authentication: Failed transactions

auth_succ_transactions

(Optional) Authentication: Successful transactions

auth_req_sent

(Optional) Authentication: Requests sent

auth_req_timedout

(Optional) Authentication: Requests timedout

auth_resp_no_match

(Optional) Authentication: Responses with no matching requests

auth_resp_not_processed

(Optional) Authentication: Responses not processed

auth_resp_error

(Optional) Authentication: Responses containing errors

acct_failed_transactions

(Optional) Accounting: Failed transactions

acct_succ_transactions

(Optional) Accounting: Successful transactions

acct_req_sent

(Optional) Accounting: Requests sent

acct_req_timedout

(Optional) Accounting: Requests timedout

acct_resp_no_match

(Optional) Accounting: Responses with no matching requests

acct_resp_not_processed

(Optional) Accounting: Responses not processed

acct_resp_error

(Optional) Accounting: Responses containing errors

Command Mode

- /exec

show radius status

show radius status [ __readonly__ [ <distr_status> ] [ <session_status> ] [ <session_owner> ] [ <session_db> ] [ <last_operation> ] [ <last_operation_status> ] [ <fail_code> ] ]

Syntax Description

Syntax Description

show

Show running system information

radius

Show RADIUS Information

status

Show RADIUS cfs distribution status

__readonly__

(Optional)

distr_status

(Optional) radius distribution status

session_status

(Optional) current session status

session_owner

(Optional) owner of the current distribution session

session_db

(Optional) status of session db

last_operation

(Optional) last_operation

last_operation_status

(Optional) status of the last operation

fail_code

(Optional) reason for the failure of last operation

Command Mode

- /exec

show redundancy status

show redundancy status [ __readonly__ <rmode_admin> <rmode_opr> <this_sup> <this_sup_rd_st> <this_sup_sup_st> <this_sup_int_st> <oth_sup> <oth_sup_rd_st> <oth_sup_sup_st> <oth_sup_int_st> <sys_strt_time> <sys_uptm_days> <sys_uptm_hrs> <sys_uptm_mins> <sys_uptm_secs> <kern_uptm_days> <kern_uptm_hrs> <kern_uptm_mins> <kern_uptm_secs> <asup_uptm_days> <asup_uptm_hrs> <asup_uptm_mins> <asup_uptm_secs> ]

Syntax Description

Syntax Description

show

redundancy

Show system redundancy status

status

Current redundancy status

__readonly__

(Optional)

rmode_admin

(Optional)

rmode_opr

(Optional)

this_sup

(Optional)

this_sup_rd_st

(Optional)

this_sup_sup_st

(Optional)

this_sup_int_st

(Optional)

oth_sup

(Optional)

oth_sup_rd_st

(Optional)

oth_sup_sup_st

(Optional)

oth_sup_int_st

(Optional)

sys_strt_time

(Optional)

sys_uptm_days

(Optional)

sys_uptm_hrs

(Optional)

sys_uptm_mins

(Optional)

sys_uptm_secs

(Optional)

kern_uptm_days

(Optional)

kern_uptm_hrs

(Optional)

kern_uptm_mins

(Optional)

kern_uptm_secs

(Optional)

asup_uptm_days

(Optional)

asup_uptm_hrs

(Optional)

asup_uptm_mins

(Optional)

asup_uptm_secs

(Optional)

Command Mode

- /exec

show regexp

show { ip mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] all | ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ ipv4 { unicast | multicast } ] } regexp <regexp-str> [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

all

Display BGP information for all address families

regexp

Display routes matching the AS path regular expression

regexp-str

Regular expression to match the AS paths

Command Mode

- /exec

show resource

show resource [ <res-mgr-res-known-name> ] [ hidden-too | with-flags ] [ __readonly__ { TABLE_vdc_resource_local <res_name> <min> <max> <used> <unused> <free> } ]

Syntax Description

Syntax Description

show

Show running system information

resource

Show resource configuration for VDC

res-mgr-res-known-name

(Optional) Resource name

hidden-too

(Optional) Also show hidden resources

with-flags

(Optional) Also show resource flags

__readonly__

(Optional) Read Only

TABLE_vdc_resource_local

(Optional)

res_name

(Optional) Resource Name

min

(Optional) Resource min configuration

max

(Optional) Resource max configuration

used

(Optional) Resource current usage for this VDC

unused

(Optional) Resource reserved for this VDC but currently not used

free

(Optional) Resource current free for this VDC

Command Mode

- /exec

show resource internal event-history errors

show resource internal event-history errors

Syntax Description

Syntax Description

show

Show running system information

resource

Show resource configuration for VDC

internal

Show internal res_mgr information

event-history

Show various event logs of Res_mgrs

errors

Show error logs of RES_MGR

Command Mode

- /exec

show resource internal event-history msgs

show resource internal event-history msgs

Syntax Description

Syntax Description

show

Show running system information

resource

Show resource configuration for VDC

internal

Show internal res_mgr information

event-history

Show various event logs of Res_mgrs

msgs

Show various message logs of RES_MGR

Command Mode

- /exec

show resource internal info

show [ vdc ] resource internal info [ { resource [ <res-mgr-res-known-name-all> [ vdc <vdc_id> ] ] } ]

Syntax Description

Syntax Description

show

Show running system information

vdc

(Optional) Show Virtual Device Contexts

resource

Show resource configuration for VDC

internal

Show internal res_mgr information

info

Show internal data structure information

resource

(Optional) Show resource configuration for VDC

res-mgr-res-known-name-all

(Optional) Resource name

vdc_id

(Optional) Enter Virtual Device Context <vdc-id>

Command Mode

- /exec

show resource internal mem-stats

show resource internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

resource

Show resource configuration for VDC

internal

Show internal res_mgr information

mem-stats

Show memory allocation statistics of RES_MGR

detail

(Optional) Show detail memstats for F_Port Server

Command Mode

- /exec

show rmon

show rmon { alarms | events | hcalarms | info | logs } [ __readonly__ [ TABLE_rmon_alarm { <alaram-str> <ascii-buf-str> <samp-type-str> <ris-trshod-str> <fall-trshod-str> <start-enable-str> } ] [ TABLE_rmon_event { <ev-alaram-str> <ev-desc-str> <ev-fir-cause> <last-fired> } ] [ TABLE_rmon_hcala { <hc-alaram-str> <hc-ascii-buf-str> <hc-sam-ty-str> <hc-ris-thresh-str> <hc-fal-thresh-str> <start-alrm-str> <fail-attem-str> } ] [ TABLE_rmon_info { <max-32-64-ala-str> <max-conf-32-ala-str> <max-conf-64-ala-str> } ] [ TABLE_rmon_log { <event-id-str> <rmon-pch> [ <log-buff-str> ] <log-oid> } ] ]

Syntax Description

Syntax Description

show

Show running system information

rmon

Display RMON statistics

alarms

Display the RMON alarm table

events

Display the RMON event table

hcalarms

Display the RMON HC(High Capacity) Alarm table

info

Display the RMON info

logs

Display the RMON event log table

__readonly__

(Optional)

TABLE_rmon_alarm

(Optional)

alaram-str

(Optional)

ascii-buf-str

(Optional)

samp-type-str

(Optional)

ris-trshod-str

(Optional)

fall-trshod-str

(Optional)

start-enable-str

(Optional)

TABLE_rmon_event

(Optional)

ev-alaram-str

(Optional)

ev-desc-str

(Optional)

ev-fir-cause

(Optional)

last-fired

(Optional)

TABLE_rmon_hcala

(Optional)

hc-alaram-str

(Optional)

hc-ascii-buf-str

(Optional)

hc-sam-ty-str

(Optional)

hc-ris-thresh-str

(Optional)

hc-fal-thresh-str

(Optional)

start-alrm-str

(Optional)

fail-attem-str

(Optional)

TABLE_rmon_info

(Optional)

max-32-64-ala-str

(Optional)

max-conf-32-ala-str

(Optional)

max-conf-64-ala-str

(Optional)

TABLE_rmon_log

(Optional)

event-id-str

(Optional)

rmon-pch

(Optional)

log-buff-str

(Optional)

log-oid

(Optional)

Command Mode

- /exec

show role

show role [ name <arg3> ] [ __readonly__ TABLE_role <role_name> <role_description> [ <attribute_scope> ] [ <permit_vsan> ] [ <permit_vlan> ] [ <permit_interface> ] [ <permit_vrf> ] TABLE_rule <rule_num> <rule_action> { <rule_permission> | <rule_permission_mds> } [ <rule_featuretype> ] [ <rule_entity> ] ]

Syntax Description

Syntax Description

show

Show running system information

role

Show role configuration

name

(Optional) Enter the role name

arg3

(Optional) Enter the role name

__readonly__

(Optional)

TABLE_role

(Optional)

role_name

(Optional)

role_description

(Optional)

attribute_scope

(Optional)

permit_vsan

(Optional)

permit_vlan

(Optional)

permit_interface

(Optional)

permit_vrf

(Optional)

TABLE_rule

(Optional)

rule_num

(Optional)

rule_action

(Optional)

rule_permission

(Optional)

rule_permission_mds

(Optional)

rule_featuretype

(Optional)

rule_entity

(Optional)

Command Mode

- /exec

show role feature-group

show role feature-group [ name <arg4> ] [ detail ] [ __readonly__ TABLE_role_feature_group <feature_group_name> TABLE_role_feature <feature_name> [ TABLE_role_feature_rule <feature_rule> ] ]

Syntax Description

Syntax Description

show

Show running system information

role

Show role configuration

feature-group

Role feature group

name

(Optional) Enter the feature-group name

arg4

(Optional) Feature-group name

detail

(Optional) Detailed information including feature rules

__readonly__

(Optional)

TABLE_role_feature_group

(Optional)

feature_group_name

(Optional)

TABLE_role_feature

(Optional)

feature_name

(Optional)

TABLE_role_feature_rule

(Optional)

feature_rule

(Optional)

Command Mode

- /exec

show role feature

show role feature [ name <arg5> | detail ] [ __readonly__ TABLE_role_feature <feature_name> [ TABLE_role_feature_rule <feature_rule> ] ]

Syntax Description

Syntax Description

show

Show running system information

role

Show role configuration

feature

Role feature

name

(Optional) Enter the feature name

arg5

(Optional) Feature name

detail

(Optional) Detailed information including feature rules

__readonly__

(Optional)

TABLE_role_feature

(Optional)

feature_name

(Optional)

TABLE_role_feature_rule

(Optional)

feature_rule

(Optional)

Command Mode

- /exec

show rollback log exec

show rollback log { exec | verify } [ __readonly__ [ <log_entry> + ] ]

Syntax Description

Syntax Description

show

Show running system information

rollback

Show rollback

log

show rollback log

exec

show rollback execution log

verify

show rollback verify log

__readonly__

(Optional) Read only

log_entry

(Optional) log entry from rollback log

Command Mode

- /exec

show rollback status

show rollback status [ __readonly__ <last_operation> <rollback_type> <name> <start_time> <end_time> <operation_status> ]

Syntax Description

Syntax Description

show

Show running system information

rollback

show rollback

status

show status of last rollback operation

__readonly__

(Optional) Read only

last_operation

(Optional) last operation

rollback_type

(Optional) rollback type

name

(Optional) name

start_time

(Optional) start time

end_time

(Optional) end time

operation_status

(Optional) operation status

Command Mode

- /exec

show route-map

show route-map [ <route-map-name> | <route-map-cfg-name> ] [ __readonly__ TABLE_rmap <name> <seq> <action> [ <descript> ] [ <continue> ] [ { TABLE_rmap_match <match_type> <match_stmt> } ] [ { TABLE_rmap_set <set_type> <set_stmt> } ] ]

Syntax Description

Syntax Description

show

Show running system information

route-map

Route-map information

route-map-name

(Optional) Route-map name

route-map-cfg-name

(Optional) Known route-map name

__readonly__

(Optional)

TABLE_rmap

(Optional)

TABLE_rmap_match

(Optional)

TABLE_rmap_set

(Optional)

name

(Optional)

seq

(Optional)

action

(Optional)

descript

(Optional)

continue

(Optional)

match_type

(Optional)

match_stmt

(Optional)

set_type

(Optional)

set_stmt

(Optional)

Command Mode

- /exec

show route-map pbr-statistics

show route-map { <pbr_rmap_name> | <pbr_rmap_cfg_name> } pbr-statistics [ __readonly__ <tag> <action> <seq> <pbr_pkt_count> <dflt_rtg_pkt_count> ]

Syntax Description

Syntax Description

show

Show running system information

route-map

Route-map information

pbr_rmap_name

Route-map name

pbr_rmap_cfg_name

Known route-map name

pbr-statistics

PBR statistics

__readonly__

(Optional)

tag

(Optional)

action

(Optional)

seq

(Optional)

pbr_pkt_count

(Optional)

dflt_rtg_pkt_count

(Optional)

Command Mode

- /exec

show routing-context

show routing-context

Syntax Description

Syntax Description

show

Show running system information

routing-context

Display the current routing context

Command Mode

- /exec

show routing-privilege

show routing-privilege

Syntax Description

Syntax Description

show

Show running system information

routing-privilege

Display the current privilege level

Command Mode

- /exec

show routing clients

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] clients [ <client> | <protocol> ] [ __readonly__ { TABLE_client <client_name> <pib_index> <epid> [ <mts_sap> ] [ <mts_sap_str> ] <mru_cache_hits> <mru_cache_misses> <pib_stale_time> <pss_created> [ <bad_l3vm_table_refcount> ] [ <pib_stale_timer> ] [ { TABLE_nib_node <uribtibtype_contextname> [ <all_igp> ] [ <self> ] [ <all> ] [ <unib_notify_mask> ] <routes> <rnhs> <labels> [ <convg_req_mask> ] [ <convg_send_mask> ] [ <utib_state> ] [ <pending_timer> ] [ <urib_state_invalid> ] } ] [ { TABLE_msgs_rcvd <urib_mtype_str> <upib_rcvd> } ] [ { TABLE_msgs_sent <urib_mtype_str> <upib_sent> } ] } ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

clients

Display urib client information

client

(Optional) Display single urib client information

protocol

(Optional) Display single urib client information

__readonly__

(Optional)

TABLE_client

(Optional)

client_name

(Optional)

pib_index

(Optional)

epid

(Optional)

mts_sap

(Optional)

mts_sap_str

(Optional)

mru_cache_hits

(Optional)

mru_cache_misses

(Optional)

pib_stale_time

(Optional)

pss_created

(Optional)

bad_l3vm_table_refcount

(Optional)

pib_stale_timer

(Optional)

TABLE_nib_node

(Optional)

uribtibtype_contextname

(Optional)

all_igp

(Optional)

self

(Optional)

all

(Optional)

unib_notify_mask

(Optional)

routes

(Optional)

rnhs

(Optional)

labels

(Optional)

convg_req_mask

(Optional)

convg_send_mask

(Optional)

utib_state

(Optional)

pending_timer

(Optional)

urib_state_invalid

(Optional)

TABLE_msgs_rcvd

(Optional)

urib_mtype_str

(Optional)

upib_rcvd

(Optional)

TABLE_msgs_sent

(Optional)

urib_mtype_str

(Optional)

upib_sent

(Optional)

Command Mode

- /exec

show routing event-history

show routing [ ip | ipv4 ] [ unicast ] [ internal ] event-history { statistics | msgs | { { add-route | cli | delete-route | detail | dme | errors | general | ha | loop-detection | modify-route | notifications | recursive-next-hop | summary | ufdm | ufdm-detail | ufdm-summary } [ filter [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ client { <client> | <protocol> } ] [ prefix-list <pfxlist-name> ] ] } }

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

internal

(Optional) Commands for internal use

event-history

Show routing event log

statistics

Show routing event log Statistics

msgs

Show routing message event log

add-route

Add route

cli

CLI

delete-route

Delete route

detail

Detail

dme

DME

errors

Errors

general

General

ha

HA

loop-detection

Loop detection

modify-route

Modify route

notifications

Notification

recursive-next-hop

Recursive next hop

summary

Summary

ufdm

UFDM

ufdm-detail

UFDM Detail

ufdm-summary

UFDM Summary

filter

(Optional) Filter event log

vrf

(Optional) Filter VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Filter for all VRFs

client

(Optional) Filter by client

client

(Optional) Filter by single urib client

protocol

(Optional) Filter by single urib client

prefix-list

(Optional) Filter by IPv4 prefix-list

pfxlist-name

(Optional) IPv4 prefix list name

Command Mode

- /exec

show routing hash

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] hash <source> <dest> [ ip-proto <ip-proto> ] [ <src-port> <dest-port> ] [ in-interface <in-interface> ] [ module <module-id> ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_addrf <addrf> TABLE_hashpath <mcast> <hashpath> <hash-val> TABLE_prefix <ipprefix> <ucast-nhops> <mcast-nhops> <attached> TABLE_path <ubest> <mbest> <ipnexthop> <ifname> <pref> <metric> <uptime> <clientname> [ <type> ] [ <tag> ] [ <stale> ] [ <unres> ] [ <hidden> ] [ <stale-label> ] ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

hash

Display load-balancing hash information

source

Source IPv4 address of unicast flow or group address for multicast flow

dest

Destination IPv4 address of unicast flow or source address for multicast flow

src-port

(Optional) Source-port

dest-port

(Optional) Destination-port

in-interface

(Optional) Incoming Interface for Packet.Option valid on Tomahawk platform only

in-interface

(Optional) Interface Name

ip-proto

(Optional) IP Protocol information for the packet

ip-proto

(Optional) IP Protocol information for the packet

module

(Optional) Module

module-id

(Optional) Module

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_addrf

(Optional)

addrf

(Optional)

TABLE_hashpath

(Optional)

mcast

(Optional)

hashpath

(Optional)

hash-val

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

ucast-nhops

(Optional)

mcast-nhops

(Optional)

attached

(Optional)

TABLE_path

(Optional)

ubest

(Optional)

mbest

(Optional)

ipnexthop

(Optional)

ifname

(Optional)

pref

(Optional)

metric

(Optional)

uptime

(Optional)

clientname

(Optional)

type

(Optional)

tag

(Optional)

stale

(Optional)

unres

(Optional)

hidden

(Optional)

stale-label

(Optional)

Command Mode

- /exec

show routing hidden-nh

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] hidden-nh [ __readonly__ <uribtibtype_contextname> [ <utibtibtype_topologyname> ] { TABLE_hidden_nh <hidden_nh_uhn_prefix> <hidden_nh_uhn_mask_len> <pib> <rnh> <rnh_mask_len> } ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

hidden-nh

Display hidden next-hop information

__readonly__

(Optional)

uribtibtype_contextname

(Optional)

utibtibtype_topologyname

(Optional)

TABLE_hidden_nh

(Optional)

hidden_nh_uhn_prefix

(Optional)

hidden_nh_uhn_mask_len

(Optional)

pib

(Optional)

rnh

(Optional)

rnh_mask_len

(Optional)

Command Mode

- /exec

show routing internal

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] internal [ force-update ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

internal

Commands for internal use

force-update

(Optional) Force update of internal state

Command Mode

- /exec

show routing internal library-info

show routing [ ip | ipv4 ] [ unicast ] internal library-info

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

internal

Commands for internal use

library-info

Show various event logs of library

Command Mode

- /exec

show routing internal mem-stats

show routing [ ip | ipv4 ] [ unicast ] internal mem-stats [ all | shared ] [ no-libs ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

internal

Commands for internal use

mem-stats

Show memory allocation statistics

all

(Optional) Display all memory information

shared

(Optional) Display shared memory information

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

Command Mode

- /exec

show routing internal pending-routes

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] internal pending-routes [ summary ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

internal

Commands for internal use

pending-routes

Display details of pending ufdm updates

summary

(Optional) Summary of ufdm updates

Command Mode

- /exec

show routing internal statistics

show routing [ ip | ipv4 ] internal statistics [ route-summary [ [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ] ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

internal

Commands for internal use

statistics

Display IP RIB internal statistics

route-summary

(Optional) Display IP RIB internal Route Summary stats

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

Command Mode

- /exec

show routing ip

show { routing | ip route } [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] [ l3vm-info ] [ rpf ] [ <ip-addr> | { <ip-prefix> [ { longer-prefixes | shorter-prefixes } ] } ] [ { <protocol> [ all ] } | { next-hop <next-hop> | next-hop-v6 <next-hop-v6> } | { interface <interface> } | { updated { [ since <stime> ] [ until <utime> ] } } ] + [ summary | detail ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_addrf <addrf> [ TABLE_prefix <ipprefix> <ucast-nhops> <mcast-nhops> <attached> TABLE_path [ <ipnexthop> ] [ <ifname> ] <uptime> <pref> <metric> <clientname> [ <type> ] [ <tag> ] [ <stale> ] [ <unres> ] [ <hidden> ] [ <stale-label> ] [ <ubest> ] [ <mbest> ] ] [ TABLE_summary <routes> <paths> [ <multicast_paths> ] [ TABLE_unicast [ <clientname> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_multicast [ <clientname> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_route_count [ <mask_len> ] [ <count> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

ip

Display IP information

route

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

l3vm-info

(Optional) Display corresponding L3VM information

rpf

(Optional) Display RPF information for multicast source

ip-addr

(Optional) Display single route longest match lookup

ip-prefix

(Optional) Display single exact match route

longer-prefixes

(Optional) Display matching routes with mask-lengths >= prefix

shorter-prefixes

(Optional) Display matching routes with mask-lengths <= prefix

protocol

(Optional) Display routes for protocol (or route type)

all

(Optional) Display routes for protocol for backup next-hops too

next-hop

(Optional) Display routes with this next-hop only

next-hop

(Optional) Next hop address

next-hop-v6

(Optional) Display routes with this V6 next-hop only

interface

(Optional) Display routes with this output interface only

interface

(Optional) Interface Name

updated

(Optional) Display routes filtered by last updated time

since

(Optional) Display those routes updated since this time

stime

(Optional) Since this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]

until

(Optional) Display those routes updated until this time

utime

(Optional) Until this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]

summary

(Optional) Display route counts

detail

(Optional) Display routes in full detail

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_addrf

(Optional)

addrf

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

ucast-nhops

(Optional)

mcast-nhops

(Optional)

attached

(Optional)

TABLE_path

(Optional)

ipnexthop

(Optional)

ifname

(Optional)

uptime

(Optional)

pref

(Optional)

metric

(Optional)

clientname

(Optional)

type

(Optional)

tag

(Optional)

stale

(Optional)

unres

(Optional)

hidden

(Optional)

stale-label

(Optional)

ubest

(Optional)

mbest

(Optional)

TABLE_summary

(Optional)

routes

(Optional)

paths

(Optional)

multicast_paths

(Optional)

TABLE_unicast

(Optional)

clientname

(Optional)

best-paths

(Optional)

backup-paths

(Optional)

TABLE_multicast

(Optional)

clientname

(Optional)

best-paths

(Optional)

backup-paths

(Optional)

TABLE_route_count

(Optional)

mask_len

(Optional)

count

(Optional)

Command Mode

- /exec

show routing ipv6

show { { ipv6 route } | { routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] } } [ l3vm-info ] [ rpf ] [ <ipv6-addr> | { <ipv6-prefix> [ { longer-prefixes | shorter-prefixes } ] } ] [ { <ipv6-protocol> [ all ] } | { next-hop <next-hop> } | { interface <interface> } | { updated { [ since <stime> ] [ until <utime> ] } } ] + [ summary | { [ detail ] [ deleted ] } ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_addrf <addrf> TABLE_prefix <ipprefix> <ucast-nhops> <mcast-nhops> <attached> TABLE_path <ubest> <mbest> <ipnexthop> <ifname> <pref> <metric> <uptime> <clientname> [ <type> ] [ <tag> ] [ <stale> ] [ <hidden> ] [ TABLE_summary <routes> <paths> [ <multicast_paths> ] [ TABLE_unicast [ <clientname> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_multicast [ <clientname> ] [ <best-paths> ] [ <backup-paths> ] ] [ TABLE_route_count [ <mask_len> ] [ <count> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

route

Display IPv6 routing table

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

l3vm-info

(Optional) Display corresponding L3VM information

rpf

(Optional) Display RPF information for multicast source

longer-prefixes

(Optional) Display matching routes with mask-lengths >= prefix

shorter-prefixes

(Optional) Display matching routes with mask-lengths <= prefix

ipv6-protocol

(Optional) Display routes for protocol (or route type)

all

(Optional) Display routes for protocol for backup next-hops too

next-hop

(Optional) Display routes with this next-hop only

interface

(Optional) Display routes with this output interface only

interface

(Optional) Interface Name

updated

(Optional) Display routes filtered by last updated time

since

(Optional) Display those routes updated since this time

stime

(Optional) Since this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]

until

(Optional) Display those routes updated until this time

utime

(Optional) Until this date/time [[CC]YY-][MM-DD-]HH:MM[:SS]

summary

(Optional) Display route counts

deleted

(Optional) Display delete-pending routes also

detail

(Optional) Display routes in full detail

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_addrf

(Optional)

addrf

(Optional)

TABLE_prefix

(Optional)

ucast-nhops

(Optional)

mcast-nhops

(Optional)

attached

(Optional)

TABLE_path

(Optional)

ubest

(Optional)

mbest

(Optional)

ifname

(Optional)

pref

(Optional)

tag

(Optional)

metric

(Optional)

uptime

(Optional)

clientname

(Optional)

type

(Optional)

stale

(Optional)

hidden

(Optional)

TABLE_summary

(Optional)

routes

(Optional)

paths

(Optional)

multicast_paths

(Optional)

TABLE_unicast

(Optional)

clientname

(Optional)

best-paths

(Optional)

backup-paths

(Optional)

TABLE_multicast

(Optional)

clientname

(Optional)

best-paths

(Optional)

backup-paths

(Optional)

TABLE_route_count

(Optional)

mask_len

(Optional)

count

(Optional)

Command Mode

- /exec

show routing ipv6 clients

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] clients [ <client> | <ipv6-protocol> ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ { TABLE_client <client_name> <pib_index> <pib_state> <pib_id> <multicast_or_unicast_pib> <mru_cache_hits> <mru_cache_misses> [ <mts_sap> ] [ <mts_sap_str> ] [ <bad_l3vm_table_refcount> ] <pib_stale_time> [ { TABLE_nib_node <u6ribtibtype_contextname> <routes> <rnhs> [ { TABLE_notifeee_mask [ <u6pib_name> ] [ <index> ] } ] [ <u6tib_state> ] [ <pending_timer> ] [ <u6rib_state_invalid> ] [ <u6nib_notifier_all> ] [ { TABLE_notify_rcd <notify_rcd_name> <notify_rcd_handle> [ <notifier_pib_u6pib_index> ] } ] [ { TABLE_notifiee_nib <notifiee_pib_u6pib_name> <u6nib_notify_handle> } ] } ] [ { TABLE_ready_client_event_queue <queue_name><queue_count> [ { TABLE_client_event <event> <use_buf> <sched> <resend> <buf> [ <state> ] } ] } ] [ { TABLE_buffer_rqst_client_event_queue <queue_name><queue_count> [ { TABLE_client_event <event> <use_buf> <sched> <resend> <buf> [ <state> ] } ] } ] <update_ack_queue_count> [ { TABLE_update_ack <update_ack> <update_ack_data> <update_ack_type> <update_ack_xid> } ] [ { TABLE_route_buffer_used_queue <queue_name> <queue_count> [ { TABLE_clt_buf <clt_buf><clt_buf_count><clt_buf_xid> } ] } ] [ { TABLE_rnh_buffer_used_queue <queue_name> <queue_count> [ { TABLE_clt_buf <clt_buf><clt_buf_count><clt_buf_xid> } ] } ] [ { TABLE_msgs_rcvd <u6rib_mtype_str><u6pib_rcvd> } ] [ { TABLE_msgs_sent <u6rib_mtype_str><u6pib_sent> } ] } ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

clients

Display u6rib client information

client

(Optional) Display single u6rib client information

ipv6-protocol

(Optional) Display single u6rib client information

__readonly__

(Optional)

TABLE_client

(Optional)

client_name

(Optional)

pib_index

(Optional)

pib_state

(Optional)

pib_id

(Optional)

multicast_or_unicast_pib

(Optional)

mru_cache_hits

(Optional)

mru_cache_misses

(Optional)

mts_sap

(Optional)

mts_sap_str

(Optional)

bad_l3vm_table_refcount

(Optional)

pib_stale_time

(Optional)

TABLE_nib_node

(Optional)

u6ribtibtype_contextname

(Optional)

routes

(Optional)

rnhs

(Optional)

TABLE_notifeee_mask

(Optional)

u6pib_name

(Optional)

index

(Optional)

u6tib_state

(Optional)

pending_timer

(Optional)

u6rib_state_invalid

(Optional)

u6nib_notifier_all

(Optional)

TABLE_notify_rcd

(Optional)

notify_rcd_name

(Optional)

notify_rcd_handle

(Optional)

notifier_pib_u6pib_index

(Optional)

TABLE_notifiee_nib

(Optional)

notifiee_pib_u6pib_name

(Optional)

u6nib_notify_handle

(Optional)

TABLE_ready_client_event_queue

(Optional)

queue_name

(Optional)

queue_count

(Optional)

TABLE_client_event

(Optional)

event

(Optional)

use_buf

(Optional)

sched

(Optional)

resend

(Optional)

buf

(Optional)

state

(Optional)

TABLE_buffer_rqst_client_event_queue

(Optional)

queue_name

(Optional)

queue_count

(Optional)

TABLE_client_event

(Optional)

event

(Optional)

use_buf

(Optional)

sched

(Optional)

resend

(Optional)

buf

(Optional)

state

(Optional)

update_ack_queue_count

(Optional)

TABLE_update_ack

(Optional)

update_ack

(Optional)

update_ack_data

(Optional)

update_ack_type

(Optional)

update_ack_xid

(Optional)

TABLE_route_buffer_used_queue

(Optional)

TABLE_clt_buf

(Optional)

TABLE_rnh_buffer_used_queue

(Optional)

TABLE_clt_buf

(Optional)

TABLE_msgs_rcvd

(Optional)

TABLE_msgs_sent

(Optional)

Command Mode

- /exec

show routing ipv6 event-history

show routing ipv6 [ unicast ] [ internal ] event-history { statistics | msgs | am | cli | detail | errors | general | ha | lfe | recursive-next-hop | summary | ufdm | ufdm-detail | ufdm-summary }

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

internal

(Optional) Commands for internal use

event-history

Show routing event log

statistics

Show routing event log Statistics

msgs

Show routing message event log

am

AM

cli

CLI

detail

Detail

errors

Errors

general

General

ha

HA

lfe

LFE

recursive-next-hop

Recursive next hop

summary

Summary

ufdm

UFDM

ufdm-detail

UFDM Detail

ufdm-summary

UFDM Summary

Command Mode

- /exec

show routing ipv6 hash

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] hash [ mpls <ipv6-prefix> [ eos ] ] <source> <dest> [ ip-proto <ip-proto> ] [ <src-port> <dest-port> ] [ in-interface <in-interface> ] [ module <module-id> ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> [ <hash-type> ] [ <mcast> ] [ <hashpath> ] TABLE_prefix <ipprefix> <ucast-nhops> <mcast-nhops> <attached> TABLE_path [ <ubest> ] [ <mbest> ] [ <ipnexthop> ] [ <ifname> ] <pref> <metric> <uptime> <clientname> [ <type> ] [ <tag> ] [ <stale> ] [ <hidden> ] ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

hash

Display load-balancing hash information

mpls

(Optional) MPLS path load-balancing hash information

eos

(Optional) Set End-of-Stack to 1

ip-proto

(Optional) IP Protocol information for the packet

ip-proto

(Optional) IP Protocol information for the packet

src-port

(Optional) Source-port

dest-port

(Optional) Destination-port

in-interface

(Optional) Incoming Interface for Packet.Option valid on Tomahawk platform only.

in-interface

(Optional) Interface Name

module

(Optional) Module

module-id

(Optional) Module

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

hash-type

(Optional)

mcast

(Optional)

hashpath

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

ucast-nhops

(Optional)

mcast-nhops

(Optional)

attached

(Optional)

TABLE_path

(Optional)

ubest

(Optional)

mbest

(Optional)

ifname

(Optional)

pref

(Optional)

tag

(Optional)

metric

(Optional)

uptime

(Optional)

clientname

(Optional)

type

(Optional)

stale

(Optional)

hidden

(Optional)

Command Mode

- /exec

show routing ipv6 hidden-nh

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] hidden-nh [ __readonly__ <uribtibtype_contextname> { TABLE_hidden_nh <nh> <nh-iod> <hidden_nh_uhn_prefix> <hidden_nh_uhn_mask_len> <pib> <rnh> <rnh_mask_len> } ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

hidden-nh

Display hidden next-hop information

__readonly__

(Optional)

uribtibtype_contextname

(Optional)

TABLE_hidden_nh

(Optional)

nh

(Optional)

nh-iod

(Optional)

hidden_nh_uhn_prefix

(Optional)

hidden_nh_uhn_mask_len

(Optional)

pib

(Optional)

rnh

(Optional)

rnh_mask_len

(Optional)

Command Mode

- /exec

show routing ipv6 internal

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] internal [ force-update ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

internal

Commands for internal use

force-update

(Optional) Force update of internal state

Command Mode

- /exec

show routing ipv6 internal buffers

show routing ipv6 [ unicast ] internal buffers

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

internal

Commands for internal use

buffers

Allocated IPC Buffers

Command Mode

- /exec

show routing ipv6 internal distribution

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] internal distribution

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

internal

Commands for internal use

distribution

Display u6rib distribution information

Command Mode

- /exec

show routing ipv6 internal distribution rnh

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] internal distribution rnh

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

internal

Commands for internal use

distribution

Display u6rib distribution information

rnh

Display u6rib RNH notifications information

Command Mode

- /exec

show routing ipv6 internal library-info

show routing ipv6 [ unicast ] internal library-info

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

internal

Commands for internal use

library-info

Show various event logs of library

Command Mode

- /exec

show routing ipv6 internal mem-stats

show routing ipv6 [ unicast ] internal mem-stats [ all | shared ] [ no-libs ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

internal

Commands for internal use

mem-stats

Show memory allocation statistics

all

(Optional) Display all memory information

shared

(Optional) Display shared memory information

no-libs

(Optional) Exclude libraries

detail

(Optional) Display detailed information

Command Mode

- /exec

show routing ipv6 internal statistics

show routing ipv6 internal statistics [ route-summary [ [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ] ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

ipv6

Display IPv6 information

internal

Commands for internal use

statistics

Display IPv6 RIB internal statistics

route-summary

(Optional) Display IPv6 RIB internal Route Summary stats

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

Command Mode

- /exec

show routing ipv6 internal ufdm

show routing ipv6 [ unicast ] internal ufdm

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

internal

Commands for internal use

ufdm

UFDM Statistics

Command Mode

- /exec

show routing ipv6 memory estimate

show routing ipv6 [ unicast ] memory estimate [ routes <route-count> next-hops <nh-count> ] [ labels ] [ __readonly__ <curr-max-MB> <curr-max-routes> <curr-max-nh> <inuse-MB> <inuse-routes> <inuse-nh> <conf-max-MB> <conf-max-routes> <conf-max-nh> [ <est-MB> <est-routes> <est-nh> ] ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

memory

Display u6rib memory information

estimate

Display u6rib memory estimate

routes

(Optional) Display u6rib memory estimate for # routes

route-count

(Optional) Number of routes

next-hops

(Optional) Display u6rib memory estimate for # next-hops per route

nh-count

(Optional) Number of next-hops per route

labels

(Optional) When the routes are associated with next hop labels

__readonly__

(Optional)

curr-max-MB

(Optional)

curr-max-routes

(Optional)

curr-max-nh

(Optional)

inuse-MB

(Optional)

inuse-routes

(Optional)

inuse-nh

(Optional)

conf-max-MB

(Optional)

conf-max-routes

(Optional)

conf-max-nh

(Optional)

est-MB

(Optional)

est-routes

(Optional)

est-nh

(Optional)

Command Mode

- /exec

show routing ipv6 memory statistics

show routing ipv6 [ unicast ] memory statistics [ __readonly__ { TABLE_shrd_mem <rbuf-alloc> <rbuf-high-water> <rbuf-max> <rbuf-numalloc> <slbs-alloc> <slbs-high-water> <slbs-max> <slbs-numalloc> } { TABLE_u6rib_slabs <slab-name> <alloc-count> <max-allocs> <slab-size> } { TABLE_u6rib_blks <slab-blk-name> <block-count> <max-blocks> <slab-count> } { TABLE_u6rib_routes_rnhs <ctx-name> <user-nodes> <total-nodes> <elem-size> } ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

ipv6

Display IPv6 information

unicast

(Optional) Display unicast routing information

memory

Display u6rib memory information

statistics

Display u6rib memory statistics

__readonly__

(Optional)

TABLE_shrd_mem

(Optional)

TABLE_u6rib_slabs

(Optional)

TABLE_u6rib_blks

(Optional)

TABLE_u6rib_routes_rnhs

(Optional)

ctx-name

(Optional)

slab-name

(Optional)

slab-blk-name

(Optional)

rbuf-alloc

(Optional)

rbuf-high-water

(Optional)

rbuf-max

(Optional)

rbuf-numalloc

(Optional)

slbs-alloc

(Optional)

slbs-high-water

(Optional)

slbs-max

(Optional)

slbs-numalloc

(Optional)

user-nodes

(Optional)

total-nodes

(Optional)

elem-size

(Optional)

alloc-count

(Optional)

max-allocs

(Optional)

slab-size

(Optional)

block-count

(Optional)

max-blocks

(Optional)

slab-count

(Optional)

Command Mode

- /exec

show routing ipv6 nexthop info

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] nexthop info [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

nexthop

Show the nh_info tree

info

Show the nh_info tree

Command Mode

- /exec

show routing ipv6 nhlfe

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] nhlfe [ stats ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ { TABLE_vrf <vrf-name-out> [ <nhlfe-owner> <nhlfe-refcount> { TABLE_nhlabel <nhlabel-index> <nh-label> } <nhlfe-is-vpn> <nhlfe-owner-index> ] <total-entries> } ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

nhlfe

Display NHLFE db

stats

(Optional) Display statistics

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

nhlfe-owner

(Optional)

nhlfe-refcount

(Optional)

TABLE_nhlabel

(Optional)

nhlabel-index

(Optional)

nh-label

(Optional)

nhlfe-is-vpn

(Optional)

nhlfe-owner-index

(Optional)

total-entries

(Optional)

Command Mode

- /exec

show routing ipv6 recursive-next-hop

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] recursive-next-hop [ <ipv6-addr> ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_addrf <addrf> TABLE_prefix <ipprefix> <uptime> TABLE_clients <client-req> <client-pend> ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ipv6

Display IPv6 information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

recursive-next-hop

Display recursive next-hop table

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_addrf

(Optional)

addrf

(Optional)

TABLE_prefix

(Optional)

uptime

(Optional)

TABLE_clients

(Optional)

client-req

(Optional)

client-pend

(Optional)

Command Mode

- /exec

show routing memory estimate

show routing [ ip | ipv4 ] [ unicast ] memory estimate [ routes <route-count> [ next-hops <nh-count> ] [ next-hops-v6 <nh6-count> ] ] [ labels ] [ __readonly__ <current_max_mb> <current_max_routes> <urib_max_nh> <used_mb> <route_stats_alloc_count> <nhs> <configured_max_mb> <configured_max_routes> <urib_routes_max_nh> [ <estimate_mb> <estimate_routes> <estimate_nhs> <estimate_with_mvpn_mb> <estimate_with_ospf_mb> <estimate_with_eigrp_mb> ] ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

memory

Display urib memory information

estimate

Display urib memory estimate

routes

(Optional) Display urib memory estimate for # routes

route-count

(Optional) Number of routes

next-hops

(Optional) Display urib memory estimate for # next-hops per route

nh-count

(Optional) Number of next-hops per route

next-hops-v6

(Optional) Display urib memory estimate for # V6 next-hops per route

nh6-count

(Optional) Number of V6 next-hops per route

labels

(Optional) When the routes are associated with next hop labels

__readonly__

(Optional)

current_max_mb

(Optional)

current_max_routes

(Optional)

urib_max_nh

(Optional)

used_mb

(Optional)

route_stats_alloc_count

(Optional)

nhs

(Optional)

configured_max_mb

(Optional)

configured_max_routes

(Optional)

urib_routes_max_nh

(Optional)

estimate_mb

(Optional)

estimate_routes

(Optional)

estimate_nhs

(Optional)

estimate_with_mvpn_mb

(Optional)

estimate_with_ospf_mb

(Optional)

estimate_with_eigrp_mb

(Optional)

Command Mode

- /exec

show routing memory statistics

show routing [ ip | ipv4 ] [ unicast ] memory statistics [ __readonly__ { TABLE_shrd_mem <ubuf-alloc> <ubuf-high-water> <ubuf-max> <ubuf-numalloc> <rbuf-alloc> <rbuf-high-water> <rbuf-max> <rbuf-numalloc> <slbs-alloc> <slbs-high-water> <slbs-max> <slbs-numalloc> } { TABLE_urib_slabs <slab-name> <slab-alloc-count> <slab-max-allocs> <slab-size> } { TABLE_urib_blks <block-name> <block-count> <max-blocks> <blks-count> } { TABLE_urib_routes_rnhs <ctx-name> <user-node> <total-node> <elem-size> } ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

memory

Display urib memory information

statistics

Display urib memory statistics

__readonly__

(Optional)

TABLE_shrd_mem

(Optional)

ubuf-alloc

(Optional)

ubuf-high-water

(Optional)

ubuf-max

(Optional)

ubuf-numalloc

(Optional)

rbuf-alloc

(Optional)

rbuf-high-water

(Optional)

rbuf-max

(Optional)

rbuf-numalloc

(Optional)

slbs-alloc

(Optional)

slbs-high-water

(Optional)

slbs-max

(Optional)

slbs-numalloc

(Optional)

TABLE_urib_slabs

(Optional)

slab-name

(Optional)

slab-alloc-count

(Optional)

slab-max-allocs

(Optional)

slab-size

(Optional)

TABLE_urib_blks

(Optional)

block-name

(Optional)

block-count

(Optional)

max-blocks

(Optional)

blks-count

(Optional)

TABLE_urib_routes_rnhs

(Optional)

ctx-name

(Optional)

user-node

(Optional)

total-node

(Optional)

elem-size

(Optional)

Command Mode

- /exec

show routing nhlfe

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] nhlfe [ stats ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> [ <nhlfe-owner> <nhlfe-refcount> { TABLE_nhlabel <nhlabel-index> <nh-label> } <nhlfe-is-vpn> <nhlfe-owner-index> ] <total-entries> ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

nhlfe

Display URIB NHLFE db

stats

(Optional) Display statistics

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

nhlfe-owner

(Optional)

nhlfe-refcount

(Optional)

TABLE_nhlabel

(Optional)

nhlabel-index

(Optional)

nh-label

(Optional)

nhlfe-is-vpn

(Optional)

nhlfe-owner-index

(Optional)

total-entries

(Optional)

Command Mode

- /exec

show routing recursive-next-hop

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] recursive-next-hop [ <ip-addr> ] [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_addrf <addrf> TABLE_prefix <ipprefix> <uptime> TABLE_clients <clientname> ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

recursive-next-hop

Display recursive next-hop table

topology-name

(Optional) topology name

ip-addr

(Optional) Display single recursive virtual next-hop

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_addrf

(Optional)

addrf

(Optional)

TABLE_prefix

(Optional)

ipprefix

(Optional)

uptime

(Optional)

TABLE_clients

(Optional)

clientname

(Optional)

Command Mode

- /exec

show routing unresolved-next-hop

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] unresolved-next-hop { [ <ip-addr> [ detail ] ] | [ summary ] } [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

unresolved-next-hop

Display unresolved next-hop list

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

vrf-all

(Optional) Display information for all VRFs

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast information

topology

(Optional) Display per-topology information

topology-name

(Optional) topology name

ip-addr

(Optional) Display single unresolved next-hop

detail

(Optional) Display prefixes for unresolved next-hop

summary

(Optional) Show summary of resolve buffers

Command Mode

- /exec

show routing vxlan-hash peer-ip

show routing vxlan-hash peer-ip <peer-ip> <inner-src-mac> <inner-dst-mac> [ <inner-src-ip> <inner-dst-ip> ] [ ip-proto <ip-proto> ] [ <inner-src-port> <inner-dst-port> ] [ module <module-id> ]

Syntax Description

Syntax Description

show

Show running system information

routing

Display routing information

vxlan-hash

Display load-balancing information for vxlan

peer-ip

Peer IP address

peer-ip

Peer IP

inner-src-mac

Inner Source MAC Address

inner-dst-mac

Inner Destination MAC Address

inner-src-ip

(Optional) Inner Source IP

inner-dst-ip

(Optional) Inner Destination IP

ip-proto

(Optional) IP Protocol information for the packet

ip-proto

(Optional) IP Protocol information for the packet

inner-src-port

(Optional) Inner Source-port

inner-dst-port

(Optional) Inner Destination-port

module

(Optional) Module

module-id

(Optional) Module

Command Mode

- /exec

show running-config

show running-config

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

Command Mode

- /exec

show running-config aaa

show running-config aaa [ all ]

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

aaa

Display aaa configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config aclmgr

show running-config aclmgr [ all | inactive-if-config ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

aclmgr

show running config for aclmgr

all

(Optional) show running config with defaults

inactive-if-config

(Optional) show running config for inactive-policies

Command Mode

- /exec

show running-config aclmgr active

show running-config aclmgr { active-if-config | all-if-config }

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

aclmgr

show running config for aclmgr

active-if-config

show running config for active-policies

all-if-config

show running config for all-policies

Command Mode

- /exec

show running-config adjmgr

show running-config adjmgr [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

adjmgr

Display adjmgr information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config all

show running-config all

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

all

Current operating configuration with defaults

Command Mode

- /exec

show running-config amt

show running-config amt [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

amt

Display amt information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config arp

show running-config arp [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

arp

Display arp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config bfd

show running-config bfd [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

bfd

show running config for bfd

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config bgp

show running-config bgp [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

bgp

Display bgp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config bloggerd

show running-config bloggerd [ all ]

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

bloggerd

Display bloggerd configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config callhome

show running-config callhome [ all ]

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

callhome

Display callhome configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config catena

show running-config catena

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

catena

catena instances

Command Mode

- /exec

show running-config cdp

show running-config cdp [ all ]

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

cdp

Display cdp configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config cert-enroll

show running-config cert-enroll [ all ]

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

cert-enroll

Display certificates configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config cfs

show running-config cfs [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operation configuration

cfs

Display cfs configurations

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config clock_manager

show running-config clock_manager [ all ]

Syntax Description

Syntax Description

running-config

Current operating configuration

clock_manager

show running config for clock manager

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config config-profile

show running-config config-profile [ <all_conf_profile_name> ]

Syntax Description

Syntax Description

show

Show running-cfg

running-config

show running configuration

config-profile

Display port-profile configuration

all_conf_profile_name

(Optional) Enter the name of the profile

Command Mode

- /exec

show running-config controller

show running-config controller

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

controller

controller

Command Mode

- /exec

show running-config copp

show running-config copp [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

copp

Control-Plane Policing

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config dhcp

show running-config dhcp [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operation configuration

dhcp

Display dhcp snoop configurations

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config diagnostic

show running-config diagnostic [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

diagnostic

Display diagnostic information

all

(Optional) Display running config with defaults

Command Mode

- /exec

show running-config diff

show running-config diff

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

diff

Show the difference between running and startup configuration

Command Mode

- /exec

show running-config dot1x

show running-config dot1x [ all ]

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

dot1x

Display dot1x configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config ecp

show running-config ecp [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

ecp

ECP (Edge Control Protocol)

all

(Optional) Display running config with defaults

Command Mode

- /exec

show running-config eem

show running-config eem

Syntax Description

Syntax Description

show

Show running system information

running-config

Show the system running configuration

eem

Show the event manager running configuration

Command Mode

- /exec

show running-config eigrp

show running-config eigrp [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

eigrp

Display eigrp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config eltm

show running-config eltm

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operation configuration

eltm

Display eltm configurations

Command Mode

- /exec

show running-config evb

show running-config evb [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

evb

EVB (Edge Virtual Bridge)

all

(Optional) Display running config with defaults

Command Mode

- /exec

show running-config exclude

show running-config exclude <feature-list> +

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

exclude

Exclude running configuration of specified features

feature-list

Exclude features

Command Mode

- /exec

show running-config expand-port-profile

show running-config expand-port-profile

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

expand-port-profile

Expand port profile

Command Mode

- /exec

show running-config explicit

show running-config explicit

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

explicit

show explicitly configured running configuration for all interfaces

Command Mode

- /exec

show running-config fabric forwarding

show running-config fabric forwarding [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config glbp

show running-config glbp [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Show the system running information

glbp

Show GLBP running configuration

all

(Optional) Show GLBP running configuration defaults

Command Mode

- /exec

show running-config hsrp

show running-config hsrp [ all ]

Syntax Description

Syntax Description

show

Show system information

running-config

System running configuration

hsrp

HSRP running configuration

all

(Optional) Show HSRP running configuration defaults

Command Mode

- /exec

show running-config icam

show running-config icam

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

icam

icam services

Command Mode

- /exec

show running-config icmpv6

show running-config icmpv6 [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

icmpv6

Display icmpv6 information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config igmp

show running-config igmp [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

igmp

Display igmp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config imp

show running-config imp [ all ]

Syntax Description

Syntax Description

show

Show system information

running-config

System running configuration

imp

IMP running configuration

all

(Optional) Show IMP running configuration defaults

Command Mode

- /exec

show running-config interface

show running-config interface [ <if0> ] [ all ] [ expand-port-profile ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

interface

Interface configuration

if0

(Optional) interface type and number in module/slot format

all

(Optional) show running config with defaults

expand-port-profile

(Optional) Expand port profile

Command Mode

- /exec

show running-config interface

show running-config interface <if0> [ membership ] [ expand-port-profile ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

interface

Interface configuration

if0

interface type and number in module/slot format

membership

(Optional) Show membership information

expand-port-profile

(Optional) Expand port profile

Command Mode

- /exec

show running-config interface defaults

show running-config interface <if0> defaults

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

interface

Interface configuration

if0

interface type and number in module/slot format

defaults

show default running config

Command Mode

- /exec

show running-config interface explicit

show running-config interface <if0> explicit

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

interface

Interface configuration

if0

interface type and number in module/slot format

explicit

show default running config

Command Mode

- /exec

show running-config ip

show running-config ip [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

ip

Display ip information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config ipqos

show running-config ipqos [ all | inactive-if-config ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

all

(Optional) show running config with defaults

inactive-if-config

(Optional) show running config for inactive-policies

Command Mode

- /exec

show running-config ipqos active

show running-config ipqos { active-if-config | all-if-config }

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

active-if-config

show running config for active-policies

all-if-config

show running config for all-policies

Command Mode

- /exec

show running-config ipv6

show running-config ipv6 [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

ipv6

Display ipv6 information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config isis

show running-config isis [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

isis

Display isis information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config l3vm

show running-config l3vm [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

l3vm

Display l3vm information

all

(Optional) Display running config with defaults

Command Mode

- /exec

show running-config ldap

show running-config ldap [ all ]

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

ldap

Display ldap configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config license

show running-config license [ all ]

Syntax Description

Syntax Description

show

show

running-config

show running system information

license

Display licensing configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config lisp

show running-config lisp [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

lisp

Display lisp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config lldp

show running-config lldp [ all ]

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

lldp

Display lldp configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config macsec

show running-config macsec

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

macsec

Show CTS information

Command Mode

- /exec

show running-config mmode

show running-config mmode [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Show running configuration

mmode

Display maintenance mode running configuration

all

(Optional) Show running config with defaults

Command Mode

- /exec

show running-config monitor

show running-config monitor [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

monitor

Configure Ethernet SPAN sessions

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config mpls ldp

show running-config mpls ldp [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

all

(Optional) Display running-config with defaults

Command Mode

- /exec

show running-config mpls static

show running-config mpls static [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

mpls

Display MPLS status and configuration

static

Static Label Bindings

all

(Optional) Display running-config with defaults

Command Mode

- /exec

show running-config mpls strip

show running-config mpls strip [ all ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Configure MPLS settings

strip

Stripping of MPLS headers

running-config

System running configuration

all

(Optional) Show running configuration for STRIPCL with defaults

Command Mode

- /exec

show running-config mpls traffic-eng

show running-config mpls traffic-eng [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

mpls

show running config for mpls features

traffic-eng

show running-config for Traffic Engineering

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config msdp

show running-config msdp [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

msdp

Display msdp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config nat

show running-config nat [ all ]

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

nat

Display NAT configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config nbm

show running-config nbm

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

nbm

show running config for Non Blocking Multicast

Command Mode

- /exec

show running-config netflow

show running-config { netflow | nfm } [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Show running system information

netflow

Show NetFlow configuration

nfm

Show NFM configuration

all

(Optional) Show config with defaults

Command Mode

- /exec

show running-config ngoam

show running-config ngoam [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Show running system information

ngoam

ngoam configuration

all

(Optional) Show running config with defaults

Command Mode

- /exec

show running-config ntp

show running-config ntp [ all ]

Syntax Description

Syntax Description

show

Show information

running-config

Show running system configuration

ntp

Show NTP information

all

(Optional) Show all NTP running configuration

Command Mode

- /exec

show running-config nv overlay

show running-config nv overlay [ all ]

Syntax Description

Syntax Description

show

Show system information

running-config

System running configuration

nv

NVE running configuration

overlay

NVE running configuration

all

(Optional) Show NVE running configuration defaults

Command Mode

- /exec

show running-config nxsdk

show running-config nxsdk [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

nxsdk

NXOS SDK

all

(Optional) Display running config with defaults

Command Mode

- /exec

show running-config openflow

show running-config openflow [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

openflow

Show running config for OpenFlow agent

all

(Optional) Show running config with defaults

Command Mode

- /exec

show running-config ospf

show running-config ospf [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

ospf

Display ospf information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config ospfv3

show running-config ospfv3 [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

ospfv3

Display ospfv3 information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config otv-isis

show running-config otv-isis [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

otv-isis

Display otv-isis information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config otv

show running-config otv [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

otv

Display otv information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config param-list

show running-config param-list [ <plistname> ]

Syntax Description

Syntax Description

show

Show running-cfg

running-config

show running configuration

param-list

Display param-list configuration

plistname

(Optional) Enter the name of the param list

Command Mode

- /exec

show running-config pim

show running-config pim [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

pim

Display pim information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config pim6

show running-config pim6 [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

pim6

Display pim6 information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config plb-services

show running-config plb-services

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

plb-services

PLB services

Command Mode

- /exec

show running-config port-profile

show running-config port-profile [ <all_profile_name> ]

Syntax Description

Syntax Description

show

Show running-cfg

running-config

show running configuration

port-profile

Display port-profile configuration

all_profile_name

(Optional) Enter the name of the profile

Command Mode

- /exec

show running-config port-security

show running-config port-security [ all ]

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

port-security

Display port-security configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config ptp

show running-config ptp [ all ]

Syntax Description

Syntax Description

running-config

Current operating configuration

ptp

show running config for ptp

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config radius

show running-config radius [ all ]

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

radius

Display radius configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config res_mgr

show running-config res_mgr

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

res_mgr

Show resource configuration for VDC

Command Mode

- /exec

show running-config rip

show running-config rip [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

rip

Display rip information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config rpm

show running-config rpm [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

rpm

Display Route Policy Manager (RPM) information

all

(Optional) Display running config with defaults

Command Mode

- /exec

show running-config rsvp

show running-config rsvp

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

rsvp

Display RSVP status

Command Mode

- /exec

show running-config section

show running-config section <section>

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

section

show only a particular section of running-config (in format needed for 'merge config' command)

section

the section to show, a regular expression, (use a dot for a space)

Command Mode

- /exec

show running-config security

show running-config security [ all ]

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

security

Display security configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config services

show running-config services

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

services

services

Command Mode

- /exec

show running-config services

show running-config services

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

services

services

Command Mode

- /exec

show running-config sflow

show running-config sflow [ all ]

Syntax Description

Syntax Description

running-config

Current operating configuration

sflow

show running config for sflow

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config sla responder

show running-config sla responder

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

sla

Service Level Agreement (SLA)

responder

Show information about sla-responder

Command Mode

- /exec

show running-config sla sender

show running-config sla sender

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

sla

Service Level Agreement (SLA)

sender

Show information about sla-sender

Command Mode

- /exec

show running-config smart-channel

show running-config smart-channel

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

smart-channel

smart channel services

Command Mode

- /exec

show running-config snmp

show running-config snmp [ all ]

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

snmp

Display snmp configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config spanning-tree

show running-config spanning-tree [ <all> | interface <interface_range> ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

spanning-tree

Show spanning tree information

all

(Optional)

interface

(Optional) Specify an interface as a target for the command

interface_range

(Optional)

Command Mode

- /exec

show running-config switch

show running-config { switch-profile | include-switch-profile }

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

switch-profile

Show switch-profile information

include-switch-profile

Show running and switch-profile configuration

Command Mode

- /exec

show running-config tacacs

show running-config tacacs + [ all ]

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config telemetry

show running-config telemetry [ all ]

Syntax Description

Syntax Description

show

show running-cfg

running-config

show running system information

telemetry

Display telemetry configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config track

show running-config track [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Show the system running information

track

Show track running configuration

all

(Optional) Show track running configuration defaults

Command Mode

- /exec

show running-config udld

show running-config udld [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

udld

Show udld configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config vdc-all

show running-config vdc-all [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

vdc-all

Display config from all VDC

all

(Optional) Display config from all VDC including defaults

Command Mode

- /exec

show running-config vdc

show running-config vdc [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

vdc

Show Virtual Device Contexts

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config virtual-service

show running-config virtual-service

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

virtual-service

Show running config for virtualization services

Command Mode

- /exec

show running-config vlan

show running-config vlan <vlan-id> [ expand-port-profile ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

vlan

Vlan commands

vlan-id

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

expand-port-profile

(Optional) Expand port profile

Command Mode

- /exec

show running-config vlan

show running-config vlan

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

vlan

Vlan commands

Command Mode

- /exec

show running-config vmtracker

show running-config vmtracker [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

vmtracker

show running config for vmtracker

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config vpc

show running-config vpc [ all ]

Syntax Description

Syntax Description

running-config

Current operating configuration

vpc

show running config for vPC

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config vrf

show running-config vrf <vrf-cfg-name> [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

vrf

Display VRF information

vrf-cfg-name

Configurable VRF name

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config vrf default

show running-config vrf default [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operationg configuration

vrf

Display VRF information

default

Known VRF name

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show running-config vrrp

show running-config vrrp [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

vrrp

Display VRRP running configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config vrrpv3

show running-config vrrpv3 [ all ]

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

vrrpv3

Show running config for VRRPv3

all

(Optional) show running config with defaults

Command Mode

- /exec

show running-config vshd

show running-config vshd

Syntax Description

Syntax Description

show

Show running system information

running-config

Current operating configuration

vshd

Show running config for vshd

Command Mode

- /exec

Chapter 19. S Show Commands

- show sampler

- show scheduler config

- show scheduler internal mem-stats

- show scheduler job

- show scheduler logfile

- show scheduler schedule

- show sflow

- show sflow statistics

- show smart-channel

- show snapshots

- show snapshots compare

- show snapshots compare ipv4routes

- show snapshots compare ipv6routes

- show snapshots compare summary

- show snapshots dump

- show snapshots dump

- show snapshots sections

- show snmp-dhcp-relay drop statistics

- show snmp-dhcp-relay statistics pkt

- show snmp-ipv6-dhcp-relay drop statistics

- show snmp-ipv6-dhcp-relay statistics pkt

- show snmp

- show snmp community

- show snmp context

- show snmp engineID

- show snmp group

- show snmp host

- show snmp internal climib loaded

- show snmp internal climib mib cseSecyIfRxStatsTable ifindex

- show snmp internal climib mib cseSecyIfTxStatsTable ifindex

- show snmp internal climib mib cseSecyStatsExtTable ifindex

- show snmp internal climib mib cseSecyTxSCStatsExtTable ifindex

- show snmp internal climib mib cshc cshcInterfaceBufferTable ifindex

- show snmp internal climib mib cshc cshcModuleInterfaceDropsTable ent_idx

- show snmp internal climib mib entity entAliasMappingTable entPhysicalIndex entAliasLogicalIndexOrZero

- show snmp internal climib mib entity entPhysicalContainsTable entPhysicalIndex entPhysicalChildIndex

- show snmp internal climib mib error-disable cErrDisableIfStatusTable ifIndex vlan

- show snmp internal climib mib fibCounterTable

- show snmp internal climib mib ifext cieIfDot1dBaseMappingTable ifindex

- show snmp internal climib mib pfcext cpfcIfPriorityTable ifIndex priority

- show snmp internal climib mib pfcext cpfcIfTable ifIndex

- show snmp internal climib mib pfcext cpfcWatchdogIfQueueInfoTable ifIndex queue-number

- show snmp internal climib mib secyCipherSuiteTable scsIndex

- show snmp internal climib mib secyIfTable ifindex

- show snmp internal climib mib secyRxSAStatsTable ifindex rx-sci rx-sa

- show snmp internal climib mib secyRxSATable ifindex rx-sci rx-sa

- show snmp internal climib mib secyRxSCStatsTable ifindex rx-sci

- show snmp internal climib mib secyRxSCTable ifindex rx-sci

- show snmp internal climib mib secyStatsTable ifindex

- show snmp internal climib mib secyTxSAStatsTable ifindex tx-sa

- show snmp internal climib mib secyTxSATable ifindex tx-sa

- show snmp internal climib mib secyTxSCStatsTable ifindex

- show snmp internal climib mib secyTxSCTable ifindex

- show snmp internal climib mib vlanif cviVlanInterfaceIndexTable vlan-id ifindex

- show snmp internal climib switch-qos

- show snmp internal climib switch-qos

- show snmp internal climib switch-qos

- show snmp internal climib switch-qos

- show snmp internal climib switch-qos

- show snmp internal climib switch-qos

- show snmp internal climib test

- show snmp internal climib trace

- show snmp internal climib trace core

- show snmp internal conditional-loaded-mib-dump

- show snmp internal eem-policy

- show snmp internal feature-mgr-dump

- show snmp internal globals

- show snmp internal loaded mibs

- show snmp internal oids notification

- show snmp internal oids registered

- show snmp internal oids supported

- show snmp internal oids unsupported

- show snmp internal protocol-instance-table

- show snmp internal registered-notifications

- show snmp internal tcp connections

- show snmp internal trace log

- show snmp internal translate oidorname

- show snmp mib igmpCacheTable

- show snmp mib igmpInterfaceTable

- show snmp mib pimCandidateRPTable

- show snmp mib pimComponentTable

- show snmp mib pimInterfaceTable

- show snmp mib pimIpMRouteNextHopTable

- show snmp mib pimIpMRouteTable

- show snmp mib pimJoinPruneInterval

- show snmp mib pimNeighborTable

- show snmp mib pimRPSetTable

- show snmp pss

- show snmp roledebug

- show snmp sessions

- show snmp snmpv3stats

- show snmp source-interface

- show snmp trap

- show snmp user

- show snmpmib internal errors

- show snmpmib internal info

- show snmpmib internal mem-stats

- show snmpmib internal msgs

- show sockets buffers

- show sockets client

- show sockets connection

- show sockets internal dispatch

- show sockets internal event-history

- show sockets internal event-history buffer-size

- show sockets keychain-dump

- show sockets local-port-range

- show sockets performance

- show sockets secure-lxc

- show sockets statistics

- show sockets tcp keychain binding

- show spanning-tree

- show spanning-tree

- show spanning-tree blockedports

- show spanning-tree bridge

- show spanning-tree inconsistentports

- show spanning-tree interface

- show spanning-tree interface

- show spanning-tree interface

- show spanning-tree internal errors

- show spanning-tree internal event-history

- show spanning-tree internal event-history stp-lite

- show spanning-tree internal event-history vpc pes

- show spanning-tree internal event-history vpc sps

- show spanning-tree internal flc-info

- show spanning-tree internal info all

- show spanning-tree internal info flush qstats

- show spanning-tree internal info flush stats

- show spanning-tree internal info global

- show spanning-tree internal info issu

- show spanning-tree internal info l2gstp

- show spanning-tree internal info l2gstp peer-info

- show spanning-tree internal info l2gstp sdb

- show spanning-tree internal info sps-pending

- show spanning-tree internal info sps-q-stats

- show spanning-tree internal info stp-lite stats

- show spanning-tree internal info tree

- show spanning-tree internal info vpc

- show spanning-tree internal interactions

- show spanning-tree internal mem-stats

- show spanning-tree internal msgs

- show spanning-tree issu-impact

- show spanning-tree mst

- show spanning-tree mst configuration

- show spanning-tree mst configuration digest

- show spanning-tree mst detail

- show spanning-tree mst interface

- show spanning-tree mst interface detail

- show spanning-tree pathcost method

- show spanning-tree root

- show spanning-tree summary

- show spanning-tree summary totals

- show sprom

- show ssh key

- show ssh server

- show startup-config

- show startup-config aaa

- show startup-config aclmgr

- show startup-config adjmgr

- show startup-config amt

- show startup-config arp

- show startup-config bfd

- show startup-config bgp

- show startup-config bloggerd

- show startup-config callhome

- show startup-config catena

- show startup-config cdp

- show startup-config cert-enroll

- show startup-config cfs

- show startup-config config-profile

- show startup-config copp

- show startup-config diagnostic

- show startup-config dot1x

- show startup-config ecp

- show startup-config eem

- show startup-config eigrp

- show startup-config eltm

- show startup-config evb

- show startup-config exclude

- show startup-config expand-port-profile

- show startup-config fabric forwarding

- show startup-config icam

- show startup-config icmpv6

- show startup-config igmp

- show startup-config imp

- show startup-config interface

- show startup-config interface

- show startup-config ip

- show startup-config ipqos

- show startup-config ipv6

- show startup-config isis

- show startup-config l3vm

- show startup-config ldap

- show startup-config license

- show startup-config lisp

- show startup-config lldp

- show startup-config log

- show startup-config macsec

- show startup-config mmode

- show startup-config monitor

- show startup-config mpls ldp

- show startup-config mpls static

- show startup-config mpls strip

- show startup-config mpls traffic-eng

- show startup-config msdp

- show startup-config nat

- show startup-config nbm

- show startup-config ngoam

- show startup-config ntp

- show startup-config nxsdk

- show startup-config openflow

- show startup-config ospf

- show startup-config ospfv3

- show startup-config otv-isis

- show startup-config otv

- show startup-config param-list

- show startup-config pim

- show startup-config pim6

- show startup-config plb-services

- show startup-config port-profile

- show startup-config port-security

- show startup-config ptp

- show startup-config radius

- show startup-config rip

- show startup-config rpm

- show startup-config rsvp

- show startup-config security

- show startup-config services

- show startup-config sflow

- show startup-config smart-channel

- show startup-config snmp

- show startup-config switch

- show startup-config tacacs

- show startup-config track

- show startup-config udld

- show startup-config vdc-all

- show startup-config vdc

- show startup-config virtual-service

- show startup-config vlan

- show startup-config vlan

- show startup-config vpc

- show startup-config vrf

- show startup-config vrf default

- show startup-config vshd

- show summary

- show switch-profile

- show switch-profile

- show switch-profile buffer

- show switch-profile peer

- show switch-profile status

- show switch-scope controller

- show switching-mode

- show switching-mode fabric-speed

- show system auto-collect tech-support

- show system clis event-history

- show system cores

- show system dme status

- show system error-id

- show system exception-info

- show system fabric-mode

- show system fast-reload stabilization-timer

- show system inband queuing statistics

- show system inband queuing status

- show system kgdb

- show system login

- show system login failures

- show system memory-thresholds

- show system mode

- show system nve infra-vlans

- show system pss shrink status

- show system redundancy ha status

- show system redundancy status

- show system reset-reason

- show system reset-reason

- show system reset-reason module

- show system resources

- show system resources

- show system resources module

- show system resources module all

- show system routing mode

- show system srg

- show system standby manual-boot

- show system switch-mode

- show system switchover impact

- show system uptime

- show system verify bios flash

- show system vlan reserved

show sampler

show sampler [ name ] [ <samplername> ] [ __readonly__ <sampler> <desc> <use_count> <sample_M> <sample_N> <sample_P> ]

Syntax Description

Syntax Description

show

Show running system information

sampler

Show Sampler Configuration

name

(Optional) Show a specific Sampler

samplername

(Optional) Specify a sampler

__readonly__

(Optional)

sampler

(Optional)

desc

(Optional)

use_count

(Optional)

sample_M

(Optional)

sample_N

(Optional)

sample_P

(Optional)

Command Mode

- /exec

show scheduler config

show scheduler config [ __readonly__ [ <terminal> ] [ <feature> ] [ <logfilesize> ] [ <emailfrom> ] [ <emailreplyto> ] [ <smtpserver> ] [ <port> ] [ <usevrf> ] [ { TABLE_userconfig <username> [ <password> ] } ] [ { TABLE_jobconfig <jobdata> } ] [ { TABLE_scheduleconfig <schedulename> [ <scheduletype> ] [ { TABLE_jobs <status> } ] [ <email> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

scheduler

Show scheduler config or data

config

Display scheduler config

__readonly__

(Optional)

terminal

(Optional) logfile terminal

feature

(Optional) name service

logfilesize

(Optional) logfilesize

emailfrom

(Optional) emailfrom

emailreplyto

(Optional) emailreplyto

smtpserver

(Optional) smtpserver

port

(Optional) port

usevrf

(Optional) usevrf

TABLE_userconfig

(Optional) userconfig

username

(Optional) username

password

(Optional) password

TABLE_jobconfig

(Optional) job configs

jobdata

(Optional) jobdata

TABLE_scheduleconfig

(Optional) schedule configs

schedulename

(Optional) schedulename

scheduletype

(Optional) scheduletype

TABLE_jobs

(Optional) jobs

status

(Optional) status

email

(Optional) email

Command Mode

- /exec

show scheduler internal mem-stats

show scheduler internal mem-stats

Syntax Description

Syntax Description

show

Show running system information

scheduler

Show scheduler config or data

internal

Display scheduler internal info

mem-stats

Display scheduler memory info

Command Mode

- /exec

show scheduler job

show scheduler job [ name <s0> ] [ __readonly__ [ { TABLE_schedulerjobs <jobname> [ <jobdata> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

scheduler

Show scheduler config or data

job

Display job information

name

(Optional) Specify the name of job

s0

(Optional) Specify the job name

__readonly__

(Optional)

TABLE_schedulerjobs

(Optional) schedulerjobs

jobname

(Optional) job name

jobdata

(Optional) job data

Command Mode

- /exec

show scheduler logfile

show scheduler logfile [ __readonly__ [ { TABLE_joblog <jobname> [ <jobstatus> ] [ <schedulename> ] [ <scheduleusername> ] [ <completiontime> ] [ <joboutput> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

scheduler

Show scheduler config or data

logfile

Display scheduler job output log

__readonly__

(Optional)

TABLE_joblog

(Optional) jobs log

jobname

(Optional) job name

jobstatus

(Optional) job status

schedulename

(Optional) schedulename

scheduleusername

(Optional) scheduleusername

completiontime

(Optional) completiontime

joboutput

(Optional) joboutput

Command Mode

- /exec

show scheduler schedule

show scheduler schedule [ name <s0> ] [ __readonly__ [ { TABLE_schedules <schedulename> [ <scheduleusername> ] [ <scheduletype> ] [ <starttime> ] [ <lastexectime> ] [ <lastcompletiontime> ] [ <execcount> ] [ <jobcount> ] [ { TABLE_jobs <jobname> [ <execstatus> ] } ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

scheduler

Show scheduler config or data

schedule

Display schedule information

name

(Optional) Specify the name of schedule

s0

(Optional) Specify the schedule name

__readonly__

(Optional)

TABLE_schedules

(Optional) schedules

schedulename

(Optional) Schedule name

scheduleusername

(Optional) schedule username

scheduletype

(Optional) scheduletype

starttime

(Optional) starttime

lastexectime

(Optional) last exec time

lastcompletiontime

(Optional) lastcompletiontime

execcount

(Optional) execcount

jobcount

(Optional) jobcount

TABLE_jobs

(Optional) jobs

jobname

(Optional) jobname

execstatus

(Optional) execstatus

Command Mode

- /exec

show sflow

show sflow

Syntax Description

Syntax Description

show

Show running system information

sflow

Display sFlow global configuration

Command Mode

- /exec

show sflow statistics

show sflow statistics [ __readonly__ <total-packets> <total-samples> <processed-samples> <dropped-samples> <dropped-sflow-samples> <sent-datagrams> <dropped-datagrams> ]

Syntax Description

Syntax Description

show

Show running system information

sflow

Display sFlow global configuration

statistics

Display sFlow statistics

__readonly__

(Optional) Read only

total-packets

(Optional) Total Packets

total-samples

(Optional) Total Samples

processed-samples

(Optional) Processed Samples

dropped-samples

(Optional) Dropped Samples

dropped-sflow-samples

(Optional) Dropped sflow Samples

sent-datagrams

(Optional) Sent Datagrams

dropped-datagrams

(Optional) Dropped Datagrams

Command Mode

- /exec

show smart-channel

show smart-channel <svc-name> [ brief ] [ __readonly__ <is_firstentry> <is_detail> <is_active> <is_firstentry_routemap> <is_firstentry_standby> <is_firstentry_acl> <is_lastentry> [ TABLE_summary <service_name> <lb_scheme> [ <interface> ] <state> <buckets> [ <reason> ] <vrf_name> <userACL> [ TABLE_device <device_grp> <dg_probe> <dg_probe_port> ] [ TABLE_route_map [ <route_map> ] [ <interface> ] [ <r_status> ] [ <int_track_id> ] ] [ TABLE_vip [ <vip_ip> ] [ <vip_probe> ] [ <vip_port> ] [ TABLE_vip_node [ <vip_node> ] [ <vip_nodev6> ] <vip_config> <vip_weight> <vip_node_probe> <vip_node_probe_port> <vip_node_probe_ip> <vip_status> <vip_track_id> <vip_ip_sla_id> [ TABLE_vip_standby [ <vip_standby_ip> ] [ <vip_standby_ipv6> ] <vip_standby_config> <vip_standby_weight> <vip_standby_probe> <vip_standby_probe_port> <vip_standby_probe_ip> <vip_standby_status> <vip_standby_track_id> <vip_standby_sla_id> ] [ TABLE_vip_acl [ <vip_access_list> ] ] ] ] [ TABLE_node [ <node> ] [ <nodev6> ] <config> <weight> <node_probe> <node_probe_port> <node_probe_ip> <status> <track_id> <ip_sla_id> [ TABLE_standby [ <standby_ip> ] [ <standby_ipv6> ] <standby_config> <standby_weight> <standby_probe> <standby_probe_port> <standby_probe_ip> <standby_status> <standby_track_id> <standby_sla_id> ] [ TABLE_acl [ <access_list> ] ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

smart-channel

smart channel

svc-name

smart channel name

brief

(Optional) brief

__readonly__

(Optional) Read Only

is_firstentry

(Optional)

is_detail

(Optional)

is_active

(Optional)

is_firstentry_routemap

(Optional)

is_firstentry_acl

(Optional)

is_lastentry

(Optional)

is_firstentry_standby

(Optional)

TABLE_summary

(Optional)

service_name

(Optional) service_name

lb_scheme

(Optional) lb scheme

interface

(Optional) interface

state

(Optional) state

buckets

(Optional) buckets

reason

(Optional) inactive reason

vrf_name

(Optional) VRF-Name

userACL

(Optional) user access-list

TABLE_device

(Optional)

device_grp

(Optional) service device group

dg_probe

(Optional) probe type

dg_probe_port

(Optional) probe port

TABLE_route_map

(Optional)

route_map

(Optional) service route map

interface

(Optional) interface

r_status

(Optional) route map status

int_track_id

(Optional) interface track id

TABLE_vip

(Optional)

vip_ip

(Optional) vip ip

vip_probe

(Optional) vip protocol

vip_port

(Optional) vip port

TABLE_vip_node

(Optional)

vip_node

(Optional) service node ip

vip_nodev6

(Optional) service node IPv6

vip_config

(Optional) node config

vip_weight

(Optional) node weight

vip_status

(Optional) node status

vip_node_probe

(Optional) node probe type

vip_node_probe_port

(Optional) node probe port

vip_node_probe_ip

(Optional) node probe ip

vip_track_id

(Optional) node track id

vip_ip_sla_id

(Optional) node ip sla id

TABLE_vip_standby

(Optional)

vip_standby_ip

(Optional) standby node ip

vip_standby_ipv6

(Optional) standby node ipv6

vip_standby_config

(Optional) standby node config

vip_standby_weight

(Optional) standby node weight

vip_standby_status

(Optional) standby node status

vip_standby_probe

(Optional) standby node probe type

vip_standby_probe_port

(Optional) standby node probe port

vip_standby_probe_ip

(Optional) standby node probe ip

vip_standby_track_id

(Optional) standby node track id

vip_standby_sla_id

(Optional) standby node sla id

TABLE_vip_acl

(Optional)

vip_access_list

(Optional) access list

TABLE_node

(Optional)

node

(Optional) service node ip

nodev6

(Optional) service node IPv6

config

(Optional) node config

weight

(Optional) node weight

status

(Optional) node status

node_probe

(Optional) node probe type

node_probe_port

(Optional) node probe port

node_probe_ip

(Optional) node probe ip

track_id

(Optional) node track id

ip_sla_id

(Optional) node ip sla id

TABLE_standby

(Optional)

standby_ip

(Optional) standby node ip

standby_ipv6

(Optional) standby node ipv6

standby_config

(Optional) standby node config

standby_weight

(Optional) standby node weight

standby_status

(Optional) standby node status

standby_probe

(Optional) standby node probe type

standby_probe_port

(Optional) standby node probe port

standby_probe_ip

(Optional) standby node probe ip

standby_track_id

(Optional) standby node track id

standby_sla_id

(Optional) standby node sla id

TABLE_acl

(Optional)

access_list

(Optional) access list

Command Mode

- /exec

show snapshots

show snapshots [ __readonly__ TABLE_snapshot <snap_name> <snap_ctime> <description> ]

Syntax Description

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

__readonly__

(Optional)

TABLE_snapshot

(Optional)

snap_name

(Optional) snapshot name

snap_ctime

(Optional) snapshot create time

description

(Optional) snapshot description

Command Mode

- /exec

show snapshots compare

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> [ __readonly__ TABLE_feature <feat_name> [ <feat_state1> <feat_state2> ] [ TABLE_element <elemkey1> <elemval1> [ <elemkey2> <elemval2> ] [ <elemkey3> <elemval3> ] [ <elemkey4> <elemval4> ] [ <elemstate1> <elemstate2> ] [ TABLE_subrow <subrowkey> <subrowval> [ <substate1> <substate2> ] ] [ TABLE_value <tag> <val1> <val2> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

compare

Compare two snapshots

snapshot-name-T1

Name of a snapshot taken at interval T1

snapshot-name-T2

Name of a snapshot taken at interval T2

__readonly__

(Optional)

TABLE_feature

(Optional)

feat_name

(Optional) feature name

feat_state1

(Optional) feature state in snapshot1

feat_state2

(Optional) feature state in snapehot2

TABLE_element

(Optional)

elemkey1

(Optional) element key1

elemval1

(Optional) element value1

elemkey2

(Optional) element key2

elemval2

(Optional) element value2

elemkey3

(Optional) element key3

elemval3

(Optional) element value3

elemkey4

(Optional) element key4

elemval4

(Optional) element value4

elemstate1

(Optional) element state in snapshot 1

elemstate2

(Optional) element state in snapshot 2

TABLE_subrow

(Optional)

subrowkey

(Optional) subrow key

subrowval

(Optional) subrow value

substate1

(Optional) subrow state in snapshot 1

substate2

(Optional) subrow state in snapshot 2

TABLE_value

(Optional)

tag

(Optional) element tag

val1

(Optional) element value for tag in snapshot1

val2

(Optional) element value for tag in snapshot2

Command Mode

- /exec

show snapshots compare ipv4routes

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> ipv4routes [ __readonly__ TABLE_summary <item_desc> <summary_val1> <summary_val2> [ <changed> ] [ TABLE_prefix <prefix> <missing_snapshot> ] ]

Syntax Description

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

compare

Comapre two snapshots

snapshot-name-T1

Name of a snapshot taken at interval T1

snapshot-name-T2

Name of a snapshot taken at interval T2

ipv4routes

Compare ipv4 route information

__readonly__

(Optional)

TABLE_summary

(Optional)

item_desc

(Optional) item description

summary_val1

(Optional) summary value in snapshot1

summary_val2

(Optional) summary value in snapehot2

changed

(Optional) changed flag

TABLE_prefix

(Optional)

prefix

(Optional) route prefix

missing_snapshot

(Optional) missing in snapshot name

Command Mode

- /exec

show snapshots compare ipv6routes

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> ipv6routes [ __readonly__ TABLE_summary <item_desc> <summary_val1> <summary_val2> [ <changed> ] [ TABLE_prefix <prefix> <missing_snapshot> ] ]

Syntax Description

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

compare

Comapre two snapshots

snapshot-name-T1

Name of a snapshot taken at interval T1

snapshot-name-T2

Name of a snapshot taken at interval T2

ipv6routes

Compare ipv6 route information

__readonly__

(Optional)

TABLE_summary

(Optional)

item_desc

(Optional) item description

summary_val1

(Optional) summary value in snapshot1

summary_val2

(Optional) summary value in snapehot2

changed

(Optional) changed flag

TABLE_prefix

(Optional)

prefix

(Optional) route prefix

missing_snapshot

(Optional) missing in snapshot name

Command Mode

- /exec

show snapshots compare summary

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> summary [ __readonly__ TABLE_summary <item_desc> <summary_val1> <summary_val2> [ <changed> ] ]

Syntax Description

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

compare

Comapre two snapshots

snapshot-name-T1

Name of a snapshot taken at interval T1

snapshot-name-T2

Name of a snapshot taken at interval T2

summary

Compare summary information

__readonly__

(Optional)

TABLE_summary

(Optional)

item_desc

(Optional) item description

summary_val1

(Optional) summary value in snapshot1

summary_val2

(Optional) summary value in snapehot2

changed

(Optional) changed flag

Command Mode

- /exec

show snapshots dump

show snapshots dump <snapshot-name> [ __readonly__ TABLE_snapshot <file_name> <snap_name> ]

Syntax Description

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

dump

Dump contents of snapshot

snapshot-name

Name of a snapshot

__readonly__

(Optional)

TABLE_snapshot

(Optional)

file_name

(Optional) snapshot XML file name

snap_name

(Optional) snapshot name

Command Mode

- /exec

show snapshots dump

show snapshots dump <snapshot-name> <section-name> [ __readonly__ TABLE_snapshot <file_name> <snap_name> ]

Syntax Description

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

dump

Dump contents of snapshot

snapshot-name

Name of a snapshot

section-name

Name of snapshot section

__readonly__

(Optional)

TABLE_snapshot

(Optional)

file_name

(Optional) snapshot XML file name

snap_name

(Optional) snapshot name

Command Mode

- /exec

show snapshots sections

show snapshots sections [ __readonly__ TABLE_snapsection <sectname> <sectcmd> <sectrow> <sectkey1> <sectkey2> ]

Syntax Description

Syntax Description

show

Show running system information

snapshots

Snapshots present on the switch

sections

User-specified snapshot sections

__readonly__

(Optional)

TABLE_snapsection

(Optional)

sectname

(Optional) snapshot section name

sectcmd

(Optional) snapshot section show command

sectrow

(Optional) snapshot section row id

sectkey1

(Optional) snapshot section key1

sectkey2

(Optional) snapshot section key2

Command Mode

- /exec

show snmp-dhcp-relay drop statistics

show snmp-dhcp-relay drop statistics [ interface <intf> | ifindex <intf-in> ] [ __readonly__ { TABLE-cdrDropStatsTable <intf-out> <relay_disable> <invalid_msg_type> <intf_err> <tx_sock_err> <tx_fail_client_intf> <unknown_op_intf> <l3_unknown_op_intf> <max_hops> <opt82_fail> <malformed> <untrusted_relay_intf> <mct_drop> } ]

Syntax Description

Syntax Description

show

Show running system information

snmp-dhcp-relay

DHCP Relay

drop

Statistics related to DHCP drop statistics

statistics

Statistics related to DHCP

interface

(Optional) input interface

intf

(Optional) interface

ifindex

(Optional) interface index value

__readonly__

(Optional) Read only

TABLE-cdrDropStatsTable

(Optional)

intf-in

(Optional) Interface Index

intf-out

(Optional) Table index

relay_disable

(Optional) relay was disabled

invalid_msg_type

(Optional) invalid message type

intf_err

(Optional) interface error

tx_sock_err

(Optional) failed to send at server

tx_fail_client_intf

(Optional) failed to send to client

unknown_op_intf

(Optional) unknown output interface

l3_unknown_op_intf

(Optional) unknown vrf or interface

max_hops

(Optional) max hops exceeded

opt82_fail

(Optional) Option82 validation failed

malformed

(Optional) malformed pkts

untrusted_relay_intf

(Optional) untrusted inteface

mct_drop

(Optional) dropped on MCT

Command Mode

- /exec

show snmp-dhcp-relay statistics pkt

show snmp-dhcp-relay statistics { [ interface <intf> | ifindex <intf-in> ] pkt-type <type-in> } [ __readonly__ { TABLE-cdrStatsTable <intf-out> <type-out> <rx_pkts> <tx_pkts> <drops> } ]

Syntax Description

Syntax Description

show

Show running system information

snmp-dhcp-relay

DHCP Relay

statistics

Statistics related to DHCP

interface

(Optional) input interface

intf

(Optional) interface

ifindex

(Optional) Interface Index Value

pkt-type

DHCP Packet type

__readonly__

(Optional) Read only

TABLE-cdrStatsTable

(Optional)

intf-in

(Optional) table index - ifindex

intf-out

(Optional) table index

type-in

table index - packet type

type-out

(Optional) table index

rx_pkts

(Optional) received pkt count

tx_pkts

(Optional) transmitted pkt count

drops

(Optional) dropped pkt count

Command Mode

- /exec

show snmp-ipv6-dhcp-relay drop statistics

show snmp-ipv6-dhcp-relay drop statistics [ interface <intf> | ifindex <intf-in> ] [ __readonly__ { TABLE-cdrIpv6DropStatsTable <intf-out> <relay_disabled> <max_hops> <invalid_pkt> <unknown_op_intf> <invalid_vrf> <opt_insert_failed> <dir_reply_frm_server> <ipv6_not_configured> <intf_err> <vpn_option_disabled> <ipv6_ext_hdr_present> <mct_drop> } ]

Syntax Description

Syntax Description

show

Show running system information

snmp-ipv6-dhcp-relay

IPv6 DHCP Relay

drop

Statistics related to IPv6 DHCP drop statistics

statistics

Statistics related to IPv6 DHCP

interface

(Optional) input interface

intf

(Optional) interface

ifindex

(Optional) interface index value

__readonly__

(Optional) Read only

TABLE-cdrIpv6DropStatsTable

(Optional)

intf-in

(Optional) Interface Index

intf-out

(Optional) Table index

relay_disabled

(Optional) DHCPv6 Relay is disabled

max_hops

(Optional) Max hops exceeded

invalid_pkt

(Optional) Packet validation failed

unknown_op_intf

(Optional) Unknown output interface

invalid_vrf

(Optional) Invalid VRF

opt_insert_failed

(Optional) Option Insertion Failed

dir_reply_frm_server

(Optional) Direct Replies (Recnfg/Adv/Reply) from server

ipv6_not_configured

(Optional) IPv6 addr not configured

intf_err

(Optional) Interface error

vpn_option_disabled

(Optional) VPN Option Disabled

ipv6_ext_hdr_present

(Optional) IPv6 extn headers present

mct_drop

(Optional) DHCP request dropped on MCT

Command Mode

- /exec

show snmp-ipv6-dhcp-relay statistics pkt

show snmp-ipv6-dhcp-relay statistics { [ interface <intf> | ifindex <intf-in> ] pkt-type <type-in> } [ __readonly__ { TABLE-cdrIpv6StatsTable <intf-out> <type-out> <rx_pkts> <tx_pkts> <drops> } ]

Syntax Description

Syntax Description

show

Show running system information

snmp-ipv6-dhcp-relay

IPv6 DHCP Relay

statistics

Statistics related to IPv6 DHCP

interface

(Optional) input interface

intf

(Optional) interface

ifindex

(Optional) Interface Index Value

pkt-type

DHCP Packet type

__readonly__

(Optional) Read only

TABLE-cdrIpv6StatsTable

(Optional)

intf-in

(Optional) table index - ifindex

intf-out

(Optional) table index

type-in

table index - packet type

type-out

(Optional) table index

rx_pkts

(Optional) received pkt count

tx_pkts

(Optional) transmitted pkt count

drops

(Optional) dropped pkt count

Command Mode

- /exec

show snmp

show snmp [ __readonly__ <sys_contact> <sys_location> <snmp_input_packets> <bad_snmp_version> <unknown_community_name> <illegal_community_name> <encoding_Err> <req_var_nums> <alt_var_nums> <get_req_in> <getnext_req_in> <set_req_in> <noname_pdu_in> <badval_pdu_in> <ro_pdu_in> <genral_err_in> <get_resp_in> <unknown_ctx> <snmp_output_packets> <trap_pdu> <toobig_err> <noname_pdu_out> <badval_pdu_out> <genral_err_out> <get_req_out> <getnext_req_out> <set_req_out> <get_resp_out> <silent_drops> [ <max_pkt_size> ] [ { TABLE_snmp_community <community_name> <grouporaccess> <context> <aclfilter> } ] [ { TABLE_snmp_users <user> <auth> <priv> [ { TABLE_groups <group> } ] [ <acl_filter> ] [ <engineID> ] } ] <tcp_auth_status> [ <port_mon_status> [ <policy_name> <pol_admin_status> <plo_oper_status> <pol_port_type> [ TABLE_policies <counter> <threshold> <interval> <rising_threshold> <rising_event> <falling_threshold> <falling_event> <pmon_config> ] ] ] [ <protocol_status> ] [ { TABLE_snmp_contexts <context_name> <proto_instanceid> <vrf> <topology> [ <vlan> | <MST> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

__readonly__

(Optional) Read Only

TABLE_snmp_community

(Optional) Table that displays the community information

TABLE_snmp_users

(Optional) Table that displays the user information

TABLE_groups

(Optional) Table that displays the group information

TABLE_policies

(Optional) Table that displays the policy information

TABLE_snmp_contexts

(Optional) Table that displays the context information

sys_contact

(Optional) System Contact

sys_location

(Optional) System Location

snmp_input_packets

(Optional) SNMP input packets

bad_snmp_version

(Optional) bad snmp version in Input SNMP packets

unknown_community_name

(Optional) unknown community name in Input SNMP packets

illegal_community_name

(Optional) Illegal community name in Input SNMP packets

encoding_Err

(Optional) Encoding Errors in Input SNMP packets

req_var_nums

(Optional) number of requested variables

alt_var_nums

(Optional) number of altered variable

get_req_in

(Optional) GET request in Input SNMP packets

getnext_req_in

(Optional) GET-NEXT request in Input SNMP packets

set_req_in

(Optional) SET request in Input SNMP packets

noname_pdu_in

(Optional) NONAME PDU in Input SNMP packets

badval_pdu_in

(Optional) Bad value PDU in Input SNMP packets

ro_pdu_in

(Optional) Read only PDU in Input SNMP packets

genral_err_in

(Optional) Genral Error in Input SNMP packets

get_resp_in

(Optional) Get Response PDU in Input SNMP packets

unknown_ctx

(Optional) Unknown context Name in Input SNMP packets

snmp_output_packets

(Optional) SNMP Output Packets

trap_pdu

(Optional) Trap PDU in Output SNMP Packets

toobig_err

(Optional) Too Big errors in Output SNMP Packets

noname_pdu_out

(Optional)

badval_pdu_out

(Optional) NoName PDU in Output SNMP Packets

genral_err_out

(Optional) Genral Error in Output SNMP Packets

get_req_out

(Optional) GET request in Output SNMP Packets

getnext_req_out

(Optional) GET-NEXTrequest in Output SNMP Packets

set_req_out

(Optional) SET request in Output SNMP packets

get_resp_out

(Optional) Get Response PDU in Output SNMP Packets

silent_drops

(Optional) Silent Drop packets

max_pkt_size

(Optional) Maximum packet size

community_name

(Optional) community name

grouporaccess

(Optional) Group name

context

(Optional) contaxt Name

aclfilter

(Optional) Acl filter name

user

(Optional) User name

auth

(Optional) Auth type

priv

(Optional) Priv Type

group

(Optional) Group name

acl_filter

(Optional) acl filter

engineID

(Optional) engine id for the user

tcp_auth_status

(Optional) TCP authentication status

port_mon_status

(Optional) Port monitor status

policy_name

(Optional) policy name

pol_admin_status

(Optional) Policy Admin status

plo_oper_status

(Optional) Police oper status

pol_port_type

(Optional) policy port type

counter

(Optional) counters

threshold

(Optional) Threshold

interval

(Optional) Interval

rising_threshold

(Optional) Rising threshold

rising_event

(Optional) Rising Event

falling_threshold

(Optional) Falling threshold

falling_event

(Optional) Falling Event

pmon_config

(Optional) PMON configured

protocol_status

(Optional) Protocol Enable status

context_name

(Optional) context name

proto_instanceid

(Optional) Protocol instance ID

vrf

(Optional) VRF Name

topology

(Optional) Topology

vlan

(Optional) VLAN name

MST

(Optional) MST name

Command Mode

- /exec

show snmp community

show snmp community [ __readonly__ { TABLE_snmp_community <community_name> <grouporaccess> <context> <aclfilter> } ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

community

show snmp community strings

__readonly__

(Optional) Read Only

TABLE_snmp_community

(Optional) contains all snmp community names

community_name

(Optional) community name

grouporaccess

(Optional) group or access name

context

(Optional) context name

aclfilter

(Optional) acl filter name

Command Mode

- /exec

show snmp context

show snmp context [ __readonly__ { TABLE_snmp_contexts <context_name> <proto_instanceid> <vrf> <topology> [ <vlan> | <MST> ] } ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

context

show snmp context mapping entries

__readonly__

(Optional)

TABLE_snmp_contexts

(Optional) All SNMP Contexts Entries

context_name

(Optional) SNMP context Name

proto_instanceid

(Optional) Name of the protocol instance

vrf

(Optional) VRF name

topology

(Optional) Name of the Topology

vlan

(Optional) VLAN Name

MST

(Optional)

Command Mode

- /exec

show snmp engineID

show snmp engineID [ __readonly__ <engineIDHex> <engineIDDec> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

engineID

show snmp engineID

__readonly__

(Optional)

engineIDHex

(Optional) SNMP engineID in HEX

engineIDDec

(Optional) SNMP engineID in Decimal

Command Mode

- /exec

show snmp group

show snmp group [ __readonly__ TABLE_role <role_name> <role_description> [ <attribute_scope> ] [ <permit_vsan> ] [ <permit_vlan> ] [ <permit_interface> ] [ <permit_vrf> ] [ TABLE_rule <rule_num> <rule_action> { <rule_permission> | <rule_permission_mds> } [ <rule_featuretype> ] [ <rule_entity> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

group

show snmp group

__readonly__

(Optional) Read Only

TABLE_role

(Optional) Table displays role

role_name

(Optional) Role Name

role_description

(Optional) Role Description

attribute_scope

(Optional) Role scope

permit_vsan

(Optional) permitted vsan

permit_vlan

(Optional)

permit_interface

(Optional)

permit_vrf

(Optional)

TABLE_rule

(Optional)

rule_num

(Optional)

rule_action

(Optional)

rule_permission

(Optional)

rule_permission_mds

(Optional)

rule_featuretype

(Optional)

rule_entity

(Optional)

Command Mode

- /exec

show snmp host

show snmp host [ __readonly__ { TABLE_host <host><port><version><level><type><secname> [ [ <vrf> ] [ TABLE_vrf_filters <vrf_filter> ] [ <src_intf> ] ] } ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

host

show snmp hosts

__readonly__

(Optional) Read Only

TABLE_host

(Optional) displays the list of hosts configured for snmp requests

TABLE_vrf_filters

(Optional) displays the host vrf filters

vrf

(Optional) VRF Name

vrf_filter

(Optional) vrf filters

src_intf

(Optional) source interface

Command Mode

- /exec

show snmp internal climib loaded

show snmp internal climib loaded [ <climib-name> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

internal

show snmp internal information

climib

mibs implemented through cli messages

loaded

list loaded files

climib-name

(Optional) name of the climib (basename of .cli file without extension)

Command Mode

- /exec

show snmp internal climib mib cseSecyIfRxStatsTable ifindex

show snmp internal climib mib cseSecyIfRxStatsTable ifindex <ifindex-in> [ __readonly__ { TABLE-cseSecyIfRxStatsTable <ifindex-out> <rx_uni_unctrl_pkts> <rx_multi_unctrl_pkts> <rx_br_unctrl_pkts> <rx_unctrl_pkt_drops> <rx_unctrl_pkt_errors> <rx_uni_ctrl_pkts> <rx_multi_ctrl_pkts> <rx_br_ctrl_pkts> <rx_ctrl_pkt_drops> <rx_ctrl_pkt_errors> <rx_unctrl_octets> <rx_ctrl_octets> <rx_unctrl_pkt_rate> <rx_unctrl_oct_rate> <rx_ctrl_pkt_rate> <rx_ctrl_oct_rate> } ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

cseSecyIfRxStatsTable

cseSecyIfRxStatsTable in EXTN MIB for SECY

ifindex

Interface Index Value

__readonly__

(Optional) read only

TABLE-cseSecyIfRxStatsTable

(Optional) cseSecyTxSCStatsExtTable

ifindex-in

Inteface index - Input

ifindex-out

(Optional) Returned Inteface index

rx_uni_unctrl_pkts

(Optional) Unicast uncontrolled pkt count

rx_multi_unctrl_pkts

(Optional) Multicast uncontrolled pkt count

rx_br_unctrl_pkts

(Optional) Broadcase uncontrolled pkt count

rx_unctrl_pkt_drops

(Optional) Drop count for the uncontrolled pkts

rx_unctrl_pkt_errors

(Optional) Error count for the uncontrolled pkts

rx_uni_ctrl_pkts

(Optional) Unicast controlled pkt count

rx_multi_ctrl_pkts

(Optional) Multiocast controlled pkt count

rx_br_ctrl_pkts

(Optional) Broadcase controlled pkt count

rx_ctrl_pkt_drops

(Optional) Drop count for controlled pkts

rx_ctrl_pkt_errors

(Optional) Error count for controlled pkts

rx_unctrl_octets

(Optional) Number of uncontrolled octets received

rx_ctrl_octets

(Optional) Number of control octets received

rx_unctrl_pkt_rate

(Optional) RX Rate of uncontrolled pkts

rx_unctrl_oct_rate

(Optional) RX rate of uncontrolled octets

rx_ctrl_pkt_rate

(Optional) RX rate of controlled pkts

rx_ctrl_oct_rate

(Optional) RX rate of controlled octets

Command Mode

- /exec

show snmp internal climib mib cseSecyIfTxStatsTable ifindex

show snmp internal climib mib cseSecyIfTxStatsTable ifindex <ifindex-in> [ __readonly__ { TABLE-cseSecyIfTxStatsTable <ifindex-out> <tx_uni_unctrl_pkts> <tx_multi_unctrl_pkts> <tx_br_unctrl_pkts> <tx_unctrl_pkt_drops> <tx_unctrl_pkt_errors> <tx_uni_ctrl_pkts> <tx_multi_ctrl_pkts> <tx_br_ctrl_pkts> <tx_ctrl_pkt_drops> <tx_ctrl_pkt_errors> <tx_unctrl_octets> <tx_ctrl_octets> <tx_common_octets> <tx_unctrl_pkt_rate> <tx_unctrl_oct_rate> <tx_ctrl_pkt_rate> <tx_ctrl_oct_rate> } ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

cseSecyIfTxStatsTable

cseSecyIfTxStatsTable in EXTN MIB for SECY

ifindex

Interface Index Value

__readonly__

(Optional) read only

TABLE-cseSecyIfTxStatsTable

(Optional) cseSecyTxSCStatsExtTable

ifindex-in

Inteface index - Input

ifindex-out

(Optional) Returned Inteface index

tx_uni_unctrl_pkts

(Optional) TX count of unicast uncontrolled pkts

tx_multi_unctrl_pkts

(Optional) TX count of multiocast uncontrolled pkts

tx_br_unctrl_pkts

(Optional) TX count of broadcast uncontrolled pkts

tx_unctrl_pkt_drops

(Optional) TX drop count of uncontrolled pkts

tx_unctrl_pkt_errors

(Optional) TX error count of uncontrolled pkts

tx_uni_ctrl_pkts

(Optional) TX count of unicast controlled pkts

tx_multi_ctrl_pkts

(Optional) TX count of multicast controlled pkts

tx_br_ctrl_pkts

(Optional) TX count of broadcast controlled pkts

tx_ctrl_pkt_drops

(Optional) TX drop count of control pkts

tx_ctrl_pkt_errors

(Optional) TX error count of controlled pkts

tx_unctrl_octets

(Optional) TX count of uncontrolled octets

tx_ctrl_octets

(Optional) TX count of controlled octets

tx_common_octets

(Optional) TX count of common octets

tx_unctrl_pkt_rate

(Optional) TX rate ofuncontrolled pkts

tx_unctrl_oct_rate

(Optional) TX rate of uncontrolled octets

tx_ctrl_pkt_rate

(Optional) TX rate of controlled pkts

tx_ctrl_oct_rate

(Optional) TX rate of controlled octets

Command Mode

- /exec

show snmp internal climib mib cseSecyStatsExtTable ifindex

show snmp internal climib mib cseSecyStatsExtTable ifindex <ifindex-in> [ __readonly__ { TABLE-cseSecyStatsExtTable <ifindex-out> <rx_tranform_err> <rx_ctrl> <rx_tagged_ctrl> <tx_tranform_err> <tx_ctrl> } ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

cseSecyStatsExtTable

Show cseSecyStatsRxTable in CISCO EXTN MIB for SECY

ifindex

Interface Index Value

__readonly__

(Optional) read only

TABLE-cseSecyStatsExtTable

(Optional) cseSecyStatsRxTable

ifindex-in

Inteface index - Input

ifindex-out

(Optional) Returned Inteface index

rx_tranform_err

(Optional) rx tranform error pkt count

rx_ctrl

(Optional) rx control pkt count

rx_tagged_ctrl

(Optional) rx tagged control pkt count

tx_tranform_err

(Optional) tx tranform error pkt count

tx_ctrl

(Optional) tx control pkt count

Command Mode

- /exec

show snmp internal climib mib cseSecyTxSCStatsExtTable ifindex

show snmp internal climib mib cseSecyTxSCStatsExtTable ifindex <ifindex-in> [ __readonly__ { TABLE-cseSecyTxSCStatsExtTable <ifindex-out> <tx_sa_not_in_use> } ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

cseSecyTxSCStatsExtTable

cseSecyTxSCStatsExtTable in EXTN MIB for SECY

ifindex

Interface Index Value

__readonly__

(Optional) read only

TABLE-cseSecyTxSCStatsExtTable

(Optional) cseSecyTxSCStatsExtTable

ifindex-in

Inteface index - Input

ifindex-out

(Optional) Returned Inteface index

tx_sa_not_in_use

(Optional) tx sa-not-in-use pkt count

Command Mode

- /exec

show snmp internal climib mib cshc cshcInterfaceBufferTable ifindex

show snmp internal climib mib cshc cshcInterfaceBufferTable ifindex <ifindex_in> [ __readonly__ { TABLE-cshcInterfaceBufferTable <ifindex_out> <tx_buffer> <rx_buffer> } ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

internal

show snmp internal information

climib

mibs implemented through cli messages

mib

Show snmp mib information

cshc

CISCO-SWITCH-HARDWARE-CAPACITY-MIB

cshcInterfaceBufferTable

cshcInterfaceBufferTable

ifindex

ifindex

ifindex_in

__readonly__

(Optional)

TABLE-cshcInterfaceBufferTable

(Optional)

ifindex_out

(Optional)

tx_buffer

(Optional)

rx_buffer

(Optional)

Command Mode

- /exec

show snmp internal climib mib cshc cshcModuleInterfaceDropsTable ent_idx

show snmp internal climib mib cshc cshcModuleInterfaceDropsTable ent_idx <ent_idx_in> [ __readonly__ { TABLE-cshcModuleInterfaceDropsTable <ent_idx_out> <tx_dropped> <rx_dropped> <tx_topdrop_port> <rx_topdrop_port> <tx_topdrop_portlist> <rx_topdrop_portlist> } ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

internal

show snmp internal information

climib

mibs implemented through cli messages

mib

Show snmp mib information

cshc

CISCO-SWITCH-HARDWARE-CAPACITY-MIB

cshcModuleInterfaceDropsTable

cshcModuleInterfaceDropsTable

ent_idx

entPhysicalIndex

ent_idx_in

__readonly__

(Optional)

TABLE-cshcModuleInterfaceDropsTable

(Optional)

ent_idx_out

(Optional)

tx_dropped

(Optional)

rx_dropped

(Optional)

tx_topdrop_port

(Optional)

rx_topdrop_port

(Optional)

tx_topdrop_portlist

(Optional)

rx_topdrop_portlist

(Optional)

Command Mode

- /exec

show snmp internal climib mib entity entAliasMappingTable entPhysicalIndex entAliasLogicalIndexOrZero

show snmp internal climib mib entity entAliasMappingTable entPhysicalIndex <entPhysicalIndex> entAliasLogicalIndexOrZero <entAliasLogicalIndexOrZero> [ __readonly__ TABLE-entAliasMappingTable <entPhysicalIndex-out> <entAliasLogicalIndexOrZero-out> <entAliasMappingIdentifier> ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show snmp mib information

entity

ENTITY-MIB

entAliasMappingTable

Show entAliasMappingTable

entPhysicalIndex

entity Physical Index

entPhysicalIndex

entity Physical Index

entAliasLogicalIndexOrZero

entity Alias Logical Index Or Zero

entAliasLogicalIndexOrZero

entity Alias Logical Index Or Zero

__readonly__

(Optional)

TABLE-entAliasMappingTable

(Optional) entAliasMappingTable

entPhysicalIndex-out

(Optional) entPhysicalIndex out

entAliasLogicalIndexOrZero-out

(Optional) entAliasLogicalIndexOrZero

entAliasMappingIdentifier

(Optional) entAliasMappingIdentifier

Command Mode

- /exec

show snmp internal climib mib entity entPhysicalContainsTable entPhysicalIndex entPhysicalChildIndex

show snmp internal climib mib entity entPhysicalContainsTable entPhysicalIndex <entPhysicalIndex> entPhysicalChildIndex <entPhysicalChildIndex> [ __readonly__ TABLE-entPhysicalContainsTable <entPhysicalIndex-out> <entPhysicalChildIndex-out> ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

entity

ENTITY-MIB

entPhysicalContainsTable

Show entPhysicalContainsTable

entPhysicalIndex

entity Physical Index

entPhysicalIndex

entity Physical Index

entPhysicalChildIndex

entity Physical Child Index

entPhysicalChildIndex

entity Physical Child Index

__readonly__

(Optional)

TABLE-entPhysicalContainsTable

(Optional) entPhysicalContainsTable

entPhysicalIndex-out

(Optional) entPhysicalIndex out

entPhysicalChildIndex-out

(Optional) entPhysicalChildIndexi out

Command Mode

- /exec

show snmp internal climib mib error-disable cErrDisableIfStatusTable ifIndex vlan

show snmp internal climib mib error-disable cErrDisableIfStatusTable ifIndex <ifx-in> vlan <vlan-in> [ __readonly__ [ TABLE-cErrDisableIfStatusTable <ifx-out> <vlan-out> <cause-out> <recovertime-out> ] ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

error-disable

ERROR-DISABLE

cErrDisableIfStatusTable

Show cErrDisableIfStatusTable

ifIndex

ifIndex

ifx-in

ifIndex value

vlan

vlan id

vlan-in

vlan id value

__readonly__

(Optional)

TABLE-cErrDisableIfStatusTable

(Optional) If Error disabled status

ifx-out

(Optional) Interface index

vlan-out

(Optional) vlan id

cause-out

(Optional) cause

recovertime-out

(Optional) recovertime

Command Mode

- /exec

show snmp internal climib mib fibCounterTable

show snmp internal climib mib fibCounterTable <entPhysicalIndex-in> <counterIndex-in> [ __readonly__ [ TABLE-fibCounterTable <entPhysicalIndex-out> <counterIndex-out> <counterDescription> <counterValue> ] ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

fibCounterTable

Show fibCounterTable

entPhysicalIndex-in

entPhysicalIndex

counterIndex-in

counter index

__readonly__

(Optional) read only

TABLE-fibCounterTable

(Optional) FIB Table

entPhysicalIndex-out

(Optional) entPhysicalIndex

counterIndex-out

(Optional) counter index

counterDescription

(Optional) counter description

counterValue

(Optional) counter value

Command Mode

- /exec

show snmp internal climib mib ifext cieIfDot1dBaseMappingTable ifindex

show snmp internal climib mib ifext cieIfDot1dBaseMappingTable ifindex <ifindex> [ __readonly__ { TABLE-cieIfDot1dBaseMappingTable <ifext-ifindex> <ifext-dot1dbaseport> } ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

internal

show snmp internal information

climib

mibs implemented through cli messages

mib

Show snmp mib information

ifext

CISCO-IF-EXTENSION-MIB

cieIfDot1dBaseMappingTable

Show cieIfDot1dBaseMappingTable

ifindex

IfIndex

ifindex

IfIndex of an interface or 0

__readonly__

(Optional)

TABLE-cieIfDot1dBaseMappingTable

(Optional)

ifext-ifindex

(Optional) IfIndex of an interface or 0

ifext-dot1dbaseport

(Optional) dot1dBasePort number for the interface

Command Mode

- /exec

show snmp internal climib mib pfcext cpfcIfPriorityTable ifIndex priority

show snmp internal climib mib pfcext cpfcIfPriorityTable ifIndex <ifx-in> priority <grp-in> [ __readonly__ [ Table-cpfcIfPriorityTable <ifx-out> <grp-out> <req-out> <indications-out> ] ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

pfcext

PFC-EXTENSION

cpfcIfPriorityTable

Show cpfcIfPriorityTable

ifIndex

ifIndex

ifx-in

ifIndex value

priority

Priority

grp-in

Priority Value

__readonly__

(Optional)

Table-cpfcIfPriorityTable

(Optional) PFC cos stats

ifx-out

(Optional) Interface index

grp-out

(Optional) Priority group

req-out

(Optional) rx-stats

indications-out

(Optional) tx-stats

Command Mode

- /exec

show snmp internal climib mib pfcext cpfcIfTable ifIndex

show snmp internal climib mib pfcext cpfcIfTable ifIndex <ifx-in> [ __readonly__ [ TABLE-cpfcIfTable <ifx-out> <req-out> <indications-out> ] ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

pfcext

PFC-EXTENSION

cpfcIfTable

Show cpfcIfTable

ifIndex

ifIndex

ifx-in

ifIndex value

__readonly__

(Optional)

TABLE-cpfcIfTable

(Optional) PFC stats

ifx-out

(Optional) Interface index

req-out

(Optional) rx-ppp

indications-out

(Optional) tx-ppp

Command Mode

- /exec

show snmp internal climib mib pfcext cpfcWatchdogIfQueueInfoTable ifIndex queue-number

show snmp internal climib mib pfcext cpfcWatchdogIfQueueInfoTable ifIndex <ifx-in> queue-number <queue-in> [ __readonly__ [ Table-cpfcWatchdogIfQueueInfoTable <ifx-out> <queue-out> <state-out> <shuts-out> <restores-out> <totaldrops-out> <queuedrops-out> <queueInDrops-out> <totalQueueInDrops-out> ] ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

pfcext

PFC-EXTENSION

cpfcWatchdogIfQueueInfoTable

Show cpfcWatchdogIfQueueInfoTable

ifIndex

ifIndex

ifx-in

ifIndex value

queue-number

Queue Number

queue-in

Queue Value

__readonly__

(Optional)

Table-cpfcWatchdogIfQueueInfoTable

(Optional) PFC queue watchdog stats

ifx-out

(Optional) Interface index

queue-out

(Optional) Queue

state-out

(Optional) Queue State

shuts-out

(Optional) Shutdowns

restores-out

(Optional) Resotres

totaldrops-out

(Optional) Total Pkt Drops

queuedrops-out

(Optional) Queue Dops

queueInDrops-out

(Optional) Ingress Queue Dops

totalQueueInDrops-out

(Optional) Total Ingress Queue Dops

Command Mode

- /exec

show snmp internal climib mib secyCipherSuiteTable scsIndex

show snmp internal climib mib secyCipherSuiteTable scsIndex <scsIndex-in> [ __readonly__ { TABLE-secyCipherSuiteTable <scsIndex-out> <scsId> <scsName> <scsCapability> <scsProtection> <scsProtectionOffset> <scsDataLengthChange> <scsICVLength> <scsRowStatus> } ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

secyCipherSuiteTable

Show secyCipherSuiteTable

scsIndex

secyCipherSuiteIndex

scsIndex-in

scs index - Input

__readonly__

(Optional) read only

TABLE-secyCipherSuiteTable

(Optional) secyCipherSuiteTable

scsIndex-out

(Optional) Returned scs index

scsId

(Optional) SuiteId

scsName

(Optional) Name

scsCapability

(Optional) Capability

scsProtection

(Optional) scsProtection

scsProtectionOffset

(Optional) scsProtectionOffset

scsDataLengthChange

(Optional) scsDataLengthChange

scsICVLength

(Optional) scsICVLength

scsRowStatus

(Optional) scsRowStatus

Command Mode

- /exec

show snmp internal climib mib secyIfTable ifindex

show snmp internal climib mib secyIfTable ifindex <ifindex-in> [ __readonly__ { TABLE-secyIfTable <ifindex-out> <if_max_peer_sc> <if_rx_max_keys> <if_tx_max_keys> <if_protect_frame_en> <if_validate_frame> <if_replay_protect_en> <if_replay_protect_window> <if_curr_cipher_suite> <if_admin_pt2pt_mac> <if_oper_pt2pt_mac> <if_include_sci_en> <if_use_es_en> <if_use_scb_en> } ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

secyIfTable

Show SecyIfTable

ifindex

Interface Index Value

__readonly__

(Optional) read only

TABLE-secyIfTable

(Optional) SecyIfTable

ifindex-in

Inteface index - Input

ifindex-out

(Optional) Returned Inteface index

if_max_peer_sc

(Optional) temp

if_rx_max_keys

(Optional) temp

if_tx_max_keys

(Optional) temp

if_protect_frame_en

(Optional) temp

if_validate_frame

(Optional) temp

if_replay_protect_en

(Optional) temp

if_replay_protect_window

(Optional) temp

if_curr_cipher_suite

(Optional) temp

if_admin_pt2pt_mac

(Optional) temp

if_oper_pt2pt_mac

(Optional) temp

if_include_sci_en

(Optional) temp

if_use_es_en

(Optional) temp

if_use_scb_en

(Optional) temp

Command Mode

- /exec

show snmp internal climib mib secyRxSAStatsTable ifindex rx-sci rx-sa

show snmp internal climib mib secyRxSAStatsTable ifindex <ifindex-in> rx-sci <rx-sci-in> rx-sa <rx-sa-in> [ __readonly__ [ TABLE-secyRxSAStatsTable <ifindex-out> <rx-sci-out> <rx-sa-out> <rx_sa_unused> <rx_sa_no_sa> <rx_sa_not_valid> <rx_sa_invalid> <rx_sa_ok> <rx_sa_ok64> ] ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

secyRxSAStatsTable

Show SecyRxSAStatsTable

ifindex

Interface Index Value

rx-sci

RX SCI Input

rx-sa

RX SCI Output

__readonly__

(Optional) read only

TABLE-secyRxSAStatsTable

(Optional) Show SecyRxSAStatsTable

ifindex-in

Inteface index - Input

rx-sci-in

RX SCI - Input

rx-sa-in

RX SA - Input

ifindex-out

(Optional) Returned Inteface index

rx-sci-out

(Optional) Returned RX SCI

rx-sa-out

(Optional) Returned RX SA

rx_sa_unused

(Optional) temp

rx_sa_no_sa

(Optional) temp

rx_sa_not_valid

(Optional) temp

rx_sa_invalid

(Optional) temp

rx_sa_ok

(Optional) temp

rx_sa_ok64

(Optional) temp

Command Mode

- /exec

show snmp internal climib mib secyRxSATable ifindex rx-sci rx-sa

show snmp internal climib mib secyRxSATable ifindex <ifindex-in> rx-sci <rx-sci-in> rx-sa <rx-sa-in> [ __readonly__ [ TABLE-secyRxSATable <ifindex-out> <rx-sci-out> <rx-sa-out> <rx_sa_state> <rx_sa_next_pn> <rx_sa_sak_unchg> <rx_sa_create_time> <rx_sa_start_time> <rx_sa_stop_time> ] ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

secyRxSATable

Show SecyRxSATable

ifindex

Interface Index Value

rx-sci

RX SCI Input

rx-sa

RX SCI Output

__readonly__

(Optional) read only

TABLE-secyRxSATable

(Optional) Show SecyRxSATable

ifindex-in

Inteface index - Input

rx-sci-in

RX SCI - Input

rx-sa-in

RX SA - Input

ifindex-out

(Optional) Returned Inteface index

rx-sci-out

(Optional) Returned RX SCI

rx-sa-out

(Optional) Returned RX SA

rx_sa_state

(Optional) temp

rx_sa_next_pn

(Optional) temp

rx_sa_sak_unchg

(Optional) temp

rx_sa_create_time

(Optional) temp

rx_sa_start_time

(Optional) temp

rx_sa_stop_time

(Optional) temp

Command Mode

- /exec

show snmp internal climib mib secyRxSCStatsTable ifindex rx-sci

show snmp internal climib mib secyRxSCStatsTable ifindex <ifindex-in> rx-sci <rx-sci-in> [ __readonly__ [ TABLE-secyRxSCStatsTable <ifindex-out> <rx-sci-out> <rx-sc-unused> <rx-sc-no-sa> <rx-sc-late> <rx-sc-not-valid> <rx-sc-invalid> <rx-sc-delayed> <rx-sc-unchkd> <rx-sc-ok> <rx-sc-oct-validated> <rx-sc-oct-decrypted> ] ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

secyRxSCStatsTable

Show SecyRxSCStatsTable

ifindex

Interface Index Value

rx-sci

secyRxSCI

__readonly__

(Optional) read only

TABLE-secyRxSCStatsTable

(Optional) Show SecyRxSCStatsTable

ifindex-in

Inteface index Input

rx-sci-in

secyRxSCI - Input

ifindex-out

(Optional) Returned Inteface index

rx-sci-out

(Optional) secyRxSCI - Output

rx-sc-unused

(Optional) temp

rx-sc-no-sa

(Optional) temp

rx-sc-late

(Optional) temp

rx-sc-not-valid

(Optional) temp

rx-sc-invalid

(Optional) temp

rx-sc-delayed

(Optional) temp

rx-sc-unchkd

(Optional) temp

rx-sc-ok

(Optional) temp

rx-sc-oct-validated

(Optional) temp

rx-sc-oct-decrypted

(Optional) temp

Command Mode

- /exec

show snmp internal climib mib secyRxSCTable ifindex rx-sci

show snmp internal climib mib secyRxSCTable ifindex <ifindex-in> rx-sci <rx-sci-in> [ __readonly__ [ TABLE-secyRxSCTable <ifindex-out> <rx-sci-out> <rx-sc-state> <rx-sc-curr-sa> <rx-sc-create-time> <rx-sc-start-time> <rx-sc-stop-time> ] ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

secyRxSCTable

Show SecyRxSCTable

ifindex

Interface Index Value

rx-sci

secyRxSCI

__readonly__

(Optional) read only

TABLE-secyRxSCTable

(Optional) Show SecyRxSCTable

ifindex-in

Inteface index Input

rx-sci-in

secyRxSCI - Input

ifindex-out

(Optional) Returned Inteface index

rx-sci-out

(Optional) secyRxSCI - Output

rx-sc-state

(Optional) temp

rx-sc-curr-sa

(Optional) temp

rx-sc-create-time

(Optional) temp

rx-sc-start-time

(Optional) temp

rx-sc-stop-time

(Optional) temp

Command Mode

- /exec

show snmp internal climib mib secyStatsTable ifindex

show snmp internal climib mib secyStatsTable ifindex <ifindex-in> [ __readonly__ { TABLE-secyStatsTable <ifindex-out> <tx_untagged> <tx_too_long> <rx_untagged> <rx_no_tag> <rx_bad_tag> <rx_unknown_sci> <rx_no_sci> <rx_overrun> } ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

secyStatsTable

Show SecyStatsTable

ifindex

Interface Index Value

__readonly__

(Optional) read only

TABLE-secyStatsTable

(Optional) SecyStatsTable

ifindex-in

Inteface index - Input

ifindex-out

(Optional) Returned Inteface index

tx_untagged

(Optional) tx untagged pkt count

tx_too_long

(Optional) tx too long pkt count

rx_untagged

(Optional) rx untagged pkt count

rx_no_tag

(Optional) rx no-tag pkt count

rx_bad_tag

(Optional) rx baf tag pkt count

rx_unknown_sci

(Optional) rx unknown SCI pkt count

rx_no_sci

(Optional) rx no-SCI pkt count

rx_overrun

(Optional) rx overrun pkt count

Command Mode

- /exec

show snmp internal climib mib secyTxSAStatsTable ifindex tx-sa

show snmp internal climib mib secyTxSAStatsTable ifindex <ifindex-in> tx-sa <tx-sa-in> [ __readonly__ [ TABLE-secyTxSAStatsTable <ifindex-out> <tx-sa-out> <tx-sa-protected> <tx-sa-encrypted> <tx-sa-protected64> <tx-sa-encrypted64> ] ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

secyTxSAStatsTable

Show SecyTxSAStatsTable

ifindex

Interface Index Value

tx-sa

TX SCI Output

__readonly__

(Optional) read only

TABLE-secyTxSAStatsTable

(Optional) Show SecyTxSAStatsTable

ifindex-in

Inteface index - Input

tx-sa-in

TX SA - Input

ifindex-out

(Optional) Returned Inteface index

tx-sa-out

(Optional) Returned TX SA

tx-sa-protected

(Optional) temp

tx-sa-encrypted

(Optional) temp

tx-sa-protected64

(Optional) temp

tx-sa-encrypted64

(Optional) temp

Command Mode

- /exec

show snmp internal climib mib secyTxSATable ifindex tx-sa

show snmp internal climib mib secyTxSATable ifindex <ifindex-in> tx-sa <tx-sa-in> [ __readonly__ [ TABLE-secyTxSATable <ifindex-out> <tx-sa-out> <tx-sa-state> <tx-sa-next-pn> <tx-sa-confi> <tx-sa-sak-unchg> <tx-sa-create-time> <tx-sa-start-time> <tx-sa-stop-time> ] ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

secyTxSATable

Show SecyTxSATable

ifindex

Interface Index Value

tx-sa

TX SCI Output

__readonly__

(Optional) read only

TABLE-secyTxSATable

(Optional) Show SecyTxSATable

ifindex-in

Inteface index - Input

tx-sa-in

TX SA - Input

ifindex-out

(Optional) Returned Inteface index

tx-sa-out

(Optional) Returned TX SA

tx-sa-state

(Optional) temp

tx-sa-next-pn

(Optional) temp

tx-sa-confi

(Optional) temp

tx-sa-sak-unchg

(Optional) temp

tx-sa-create-time

(Optional) temp

tx-sa-start-time

(Optional) temp

tx-sa-stop-time

(Optional) temp

Command Mode

- /exec

show snmp internal climib mib secyTxSCStatsTable ifindex

show snmp internal climib mib secyTxSCStatsTable ifindex <ifindex-in> [ __readonly__ [ TABLE-secyTxSCStatsTable <ifindex-out> <tx-sc-protected> <tx-sc-encrypted> <tx-sc-oct-protected> <tx-sc-oct-encrypted> ] ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

secyTxSCStatsTable

Show SecyTxSCStatsTable

ifindex

Interface Index Value

__readonly__

(Optional) read only

TABLE-secyTxSCStatsTable

(Optional) Show SecyTxSCStatsTable

ifindex-in

Inteface index - Input

ifindex-out

(Optional) Returned Inteface index

tx-sc-protected

(Optional) temp

tx-sc-encrypted

(Optional) temp

tx-sc-oct-protected

(Optional) temp

tx-sc-oct-encrypted

(Optional) temp

Command Mode

- /exec

show snmp internal climib mib secyTxSCTable ifindex

show snmp internal climib mib secyTxSCTable ifindex <ifindex-in> [ __readonly__ [ TABLE-secyTxSCTable <ifindex-out> <tx-sc-sci> <tx-sc-state> <tx-sc-encoding-sa> <tx-sc-enciphering-sa> <tx-sc-create-time> <tx-sc-start-time> <tx-sc-stop-time> ] ]

Syntax Description

Syntax Description

show

Show information

snmp

Show SNMP information

internal

Show SNMP internal information

climib

Show SNMP internal climib information

mib

Show SNMP mib information

secyTxSCTable

Show SecyTxSCTable

ifindex

Interface Index Value

__readonly__

(Optional) read only

TABLE-secyTxSCTable

(Optional) Show SecyTxSCTable

ifindex-in

Inteface index - Input

ifindex-out

(Optional) Returned Inteface index

tx-sc-sci

(Optional) temp

tx-sc-state

(Optional) temp

tx-sc-encoding-sa

(Optional) temp

tx-sc-enciphering-sa

(Optional) temp

tx-sc-create-time

(Optional) temp

tx-sc-start-time

(Optional) temp

tx-sc-stop-time

(Optional) temp

Command Mode

- /exec

show snmp internal climib mib vlanif cviVlanInterfaceIndexTable vlan-id ifindex

show snmp internal climib mib vlanif cviVlanInterfaceIndexTable vlan-id <vlan> ifindex <ifindex> [ __readonly__ { TABLE-cviVlanInterfaceIndexTable <vlanif-vlan> <vlanif-main-ifindex> <vlanif-ifindex> } ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

internal

show snmp internal information

climib

mibs implemented through cli messages

mib

Show snmp mib information

vlanif

CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB

cviVlanInterfaceIndexTable

Show cviVlanInterfaceIndexTable

vlan-id

VLAN ID

vlan

VLAN ID

ifindex

Ifindex

ifindex

Ifindex of a subinterface or 0 for SVI

__readonly__

(Optional)

TABLE-cviVlanInterfaceIndexTable

(Optional)

vlanif-vlan

(Optional) Vlan ID

vlanif-main-ifindex

(Optional) Ifindex of a subinterface or 0 for SVI

vlanif-ifindex

(Optional) Ifindex of the routed Vlan interface

Command Mode

- /exec

show snmp internal climib switch-qos

show snmp internal climib switch-qos [ csqIfQosGroupInfoTable [ ifIndex <ifIndex-in> [ csqIfQosGroupInfoDirection <ifDirection-in> [ csqIfQosGroupInfoGroupNumber <ifGroupNum-in> ] ] ] ] [ __readonly__ TABLE_csqIfQosGroupInfoTable <ifIndex-out> <csqIfQosGroupInfoDirection-out> <csqIfQosGroupInfoGroupNumber-out> <csqIfQosGroupInfoQueueSize> <csqIfQosGroupInfoHwMTU> <csqIfQosGroupInfoMTU> <csqIfQosGroupInfoDropType> <csqIfQosGroupInfoResumeThresh> <csqIfQosGroupInfoPauseThresh> <csqIfQosGroupInfoScheduling> <csqIfQosGroupInfoBandwidth> <csqIfQosGroupInfoBandwidthUnits> <csqIfQosGroupInfoShapeMinThresh> <csqIfQosGroupInfoShapeMaxThresh> <csqIfQosGroupInfoShapeUnits> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

internal

show snmp internal information

climib

mibs implemented through cli messages

switch-qos

CISCO-SWITCH-QOS-MIB

csqIfQosGroupInfoTable

(Optional) csqIfQosGroupInfoTable

ifIndex

(Optional) Interface index

ifIndex-in

(Optional) Interface index value

csqIfQosGroupInfoDirection

(Optional) csqIfQosGroupInfoDirection

ifDirection-in

(Optional) ifDirection-in

csqIfQosGroupInfoGroupNumber

(Optional) csqIfQosGroupInfoGroupNumber

ifGroupNum-in

(Optional) ifGroupNum-in

__readonly__

(Optional)

TABLE_csqIfQosGroupInfoTable

(Optional) Qos Group Info Table

ifIndex-out

(Optional) If Index Out value

csqIfQosGroupInfoDirection-out

(Optional) Packet Direction

csqIfQosGroupInfoGroupNumber-out

(Optional) Group Number

csqIfQosGroupInfoQueueSize

(Optional) Queue Size

csqIfQosGroupInfoHwMTU

(Optional) Hardware MTU

csqIfQosGroupInfoMTU

(Optional) MTU

csqIfQosGroupInfoDropType

(Optional) Dro Type

csqIfQosGroupInfoResumeThresh

(Optional) Resume Threshold

csqIfQosGroupInfoPauseThresh

(Optional) Pause Threshold

csqIfQosGroupInfoScheduling

(Optional) Scheduling

csqIfQosGroupInfoBandwidth

(Optional) Bandwidth

csqIfQosGroupInfoBandwidthUnits

(Optional) Bandwidth Units

csqIfQosGroupInfoShapeMinThresh

(Optional) Shape Min

csqIfQosGroupInfoShapeMaxThresh

(Optional) Shape Max

csqIfQosGroupInfoShapeUnits

(Optional) Shape Units

Command Mode

- /exec

show snmp internal climib switch-qos

show snmp internal climib switch-qos [ csqIfQosGroupStatsTable [ ifIndex <ifIndex-in> [ csqIfQosGroupStatsDirection <ifDirection-in> [ csqIfQosGroupStatsGroupNumber <ifGroupNum-in> [ csqIfQosGroupStatsType <statsType-in> ] ] ] ] ] [ __readonly__ TABLE_csqIfQosGroupStatsTable <ifIndex-out> <csqIfQosGroupStatsDirection-out> <csqIfQosGroupStatsGroupNumber-out> <csqIfQosGroupStatsType-out> <csqIfQosGroupStatsValue> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

internal

show snmp internal information

climib

mibs implemented through cli messages

switch-qos

CISCO-SWITCH-QOS-MIB

csqIfQosGroupStatsTable

(Optional) csqIfQosGroupStatsTable

ifIndex

(Optional) Interface Index

ifIndex-in

(Optional) Interface index value

csqIfQosGroupStatsDirection

(Optional) csqIfQosGroupInfoDirection

ifDirection-in

(Optional) ifDirection-in

csqIfQosGroupStatsGroupNumber

(Optional) csqIfQosGroupInfoGroupNumber

ifGroupNum-in

(Optional) ifGroupNum-in

csqIfQosGroupStatsType

(Optional) csqIfQosGroupStatsType

statsType-in

(Optional) StatsType

__readonly__

(Optional)

TABLE_csqIfQosGroupStatsTable

(Optional) Qos Group Info Table

ifIndex-out

(Optional) If Index Out value

csqIfQosGroupStatsDirection-out

(Optional) Packet Direction

csqIfQosGroupStatsGroupNumber-out

(Optional) Group Number

csqIfQosGroupStatsType-out

(Optional) Stats Counter type

csqIfQosGroupStatsValue

(Optional) Stats counter value

Command Mode

- /exec

show snmp internal climib switch-qos

show snmp internal climib switch-qos [ csqIfPriGrpInBufUsageTable [ ifIndex <ifidx> [ csqIfPriGrpInBufUsageGrpNo <pgidx> ] ] ] [ __readonly__ TABLE-csqIfPriGrpInBufUsageTable <ifidx_out> <pgidx_out> <pg_min_count> <pg_shared_count> <pg_hdrm_count> <pg_glb_hdrm_count> <pg_shared_hiwm> <pg_hdrm_hiwm> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

internal

show snmp internal information

climib

mibs implemented through cli messages

switch-qos

CISCO-SWITCH-QOS-MIB

csqIfPriGrpInBufUsageTable

(Optional) Priority Group Input buffer usage table

ifIndex

(Optional) Interface index

ifidx

(Optional) Index val

csqIfPriGrpInBufUsageGrpNo

(Optional) Priority Group index

pgidx

(Optional) Index val

__readonly__

(Optional) Read Only

TABLE-csqIfPriGrpInBufUsageTable

(Optional) SNMP table

ifidx_out

(Optional) Interface index out

pgidx_out

(Optional) PG index out

pg_min_count

(Optional) PG min count

pg_shared_count

(Optional) PG shared count

pg_hdrm_count

(Optional) PG headroom count

pg_glb_hdrm_count

(Optional) PG global headroom count

pg_shared_hiwm

(Optional) PG shared high watermark

pg_hdrm_hiwm

(Optional) PG headroom high watermark

Command Mode

- /exec

show snmp internal climib switch-qos

show snmp internal climib switch-qos [ csqSharedPoolUsageTable [ entPhysicalIndex <mod_ent> [ csqSharedPoolUsageInstNo <inst_id> [ csqSharedPoolUsagePoolNo <sp_num> ] ] ] ] [ __readonly__ TABLE-csqSharedPoolUsageTable <mod_ent_out> <inst_id_out> <sp_num_out> <sp_used> <sp_remain> <sp_peak> <sp_total> <sp_used_tx> <sp_remain_tx> <sp_peak_tx> <sp_total_tx> <sp_name_tx> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

internal

show snmp internal information

climib

mibs implemented through cli messages

switch-qos

CISCO-SWITCH-QOS-MIB

csqSharedPoolUsageTable

(Optional) SNMP table csqSharedPoolUsageTable

entPhysicalIndex

(Optional) The entity index of module

mod_ent

(Optional)

csqSharedPoolUsageInstNo

(Optional) The instance NO. of the module

inst_id

(Optional)

csqSharedPoolUsagePoolNo

(Optional) Service pool

sp_num

(Optional) Servie pool number

__readonly__

(Optional) Read Only

TABLE-csqSharedPoolUsageTable

(Optional)

mod_ent_out

(Optional) Module entity

inst_id_out

(Optional) Instance ID

sp_num_out

(Optional) Service Pool number

sp_used

(Optional) Used Cells

sp_remain

(Optional) Remain Cells

sp_peak

(Optional) Peak Cells

sp_total

(Optional) Total Cells

sp_used_tx

(Optional) Used Cells

sp_remain_tx

(Optional) Remain Cells

sp_peak_tx

(Optional) Peak Cells

sp_total_tx

(Optional) Total Cells

sp_name_tx

(Optional) Tx SP Name

Command Mode

- /exec

show snmp internal climib switch-qos

show snmp internal climib switch-qos [ csqServicePoolCellSize ] [ __readonly__ SCALAR-csqServicePoolCellSize <cell_size> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

internal

show snmp internal information

climib

mibs implemented through cli messages

switch-qos

CISCO-SWITCH-QOS-MIB

csqServicePoolCellSize

(Optional) SNMP table csqServicePoolCellSize

__readonly__

(Optional) Read Only

SCALAR-csqServicePoolCellSize

(Optional)

cell_size

(Optional) Cell size

Command Mode

- /exec

show snmp internal climib switch-qos

show snmp internal climib switch-qos [ csqHwSharedPoolUsageTable [ entPhysicalIndex <mod_ent> [ csqHwSharedPoolDeviceId <device_id> [ csqHwSharedPoolUsageInstNo <inst_id> [ csqHwSharedPoolStatsDirection <stats_dir> [ csqHwSharedPoolStatsType <sp_type> ] ] ] ] ] ] [ __readonly__ TABLE-csqHwSharedPoolUsageTable <mod_ent_out> <device_id_out> <inst_id_out> <stats_dir_out> <sp_type_out> <sp_used> <sp_remain> <sp_peak> <sp_total> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

internal

show snmp internal information

climib

mibs implemented through cli messages

switch-qos

CISCO-SWITCH-QOS-MIB

csqHwSharedPoolUsageTable

(Optional) SNMP table csqHwSharedPoolUsageTable

entPhysicalIndex

(Optional) The entity index of module

mod_ent

(Optional)

csqHwSharedPoolDeviceId

(Optional) The device ID

device_id

(Optional)

csqHwSharedPoolUsageInstNo

(Optional) The instance NO. of the module

inst_id

(Optional)

csqHwSharedPoolStatsDirection

(Optional) The traffic direction

stats_dir

(Optional)

csqHwSharedPoolStatsType

(Optional) Service pool stats Type

sp_type

(Optional) Servie pool type

__readonly__

(Optional) Read Only

TABLE-csqHwSharedPoolUsageTable

(Optional)

mod_ent_out

(Optional) Module entity

device_id_out

(Optional) Device ID

inst_id_out

(Optional) Instance ID

stats_dir_out

(Optional) Service Pool stats direction

sp_type_out

(Optional) Service Pool type

sp_used

(Optional) Used Cells

sp_remain

(Optional) Remain Cells

sp_peak

(Optional) Peak Cells

sp_total

(Optional) Total Cells

Command Mode

- /exec

show snmp internal climib test

show snmp internal climib test <id> [ __readonly__ <snmp-id> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

internal

show snmp internal information

climib

mibs implemented through cli messages

test

test

id

test id

__readonly__

(Optional) Read only

snmp-id

(Optional)

Command Mode

- /exec

show snmp internal climib trace

show snmp internal climib trace [ <buffers> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

internal

show snmp internal information

climib

mibs implemented through cli messages

trace

debug trace buffers (always on)

buffers

(Optional) trace buffer

Command Mode

- /exec

show snmp internal climib trace core

show snmp internal climib trace core <pid>

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

internal

show snmp internal information

climib

mibs implemented through cli messages

trace

debug trace buffers (always on)

core

display trace info from a core file (all buffers)

pid

PID from 'show cores

Command Mode

- /exec

show snmp internal conditional-loaded-mib-dump

show snmp internal conditional-loaded-mib-dump

Syntax Description

Syntax Description

show

Show commands

snmp

show snmp information

internal

show snmp internal information

conditional-loaded-mib-dump

conditional mib loaded in the agent

Command Mode

- /exec

show snmp internal eem-policy

show snmp internal eem-policy

Syntax Description

Syntax Description

show

Show commands

snmp

show snmp information

internal

show snmp internal information

eem-policy

EEM policies in the snmp publisher

Command Mode

- /exec

show snmp internal feature-mgr-dump

show snmp internal feature-mgr-dump

Syntax Description

Syntax Description

show

Show commands

snmp

show snmp information

internal

show snmp internal information

feature-mgr-dump

conditional features and their mibs

Command Mode

- /exec

show snmp internal globals

show snmp internal globals

Syntax Description

Syntax Description

show

Show commands

snmp

show snmp information

internal

show snmp internal information

globals

show snmp all global variables

Command Mode

- /exec

show snmp internal loaded mibs

show snmp internal loaded mibs

Syntax Description

Syntax Description

show

Show commands

snmp

show snmp information

internal

show snmp internal information

loaded

show snmp all loaded mib modules

mibs

show snmp all loaded mib modules

Command Mode

- /exec

show snmp internal oids notification

show snmp internal oids notification

Syntax Description

Syntax Description

show

Show commands

snmp

show snmp information

internal

show snmp internal information

oids

show snmp oids

notification

show snmp supported notifications

Command Mode

- /exec

show snmp internal oids registered

show snmp internal oids registered

Syntax Description

Syntax Description

show

Show commands

snmp

show snmp information

internal

show snmp internal information

oids

show snmp oids

registered

show snmp all registred mib oids

Command Mode

- /exec

show snmp internal oids supported

show snmp internal oids supported [ create ]

Syntax Description

Syntax Description

show

Show commands

snmp

show snmp information

internal

show snmp internal information

oids

show snmp oids

supported

show snmp supported oid requests

create

(Optional) create snmp supported oid file

Command Mode

- /exec

show snmp internal oids unsupported

show snmp internal oids unsupported

Syntax Description

Syntax Description

show

Show commands

snmp

show snmp information

internal

show snmp internal information

oids

show snmp oids

unsupported

show snmp unsupported oid requests

Command Mode

- /exec

show snmp internal protocol-instance-table

show snmp internal protocol-instance-table

Syntax Description

Syntax Description

show

Show commands

snmp

show snmp information

internal

show snmp internal information

protocol-instance-table

protocol instance-sap table

Command Mode

- /exec

show snmp internal registered-notifications

show snmp internal registered-notifications

Syntax Description

Syntax Description

show

Show commands

snmp

show snmp information

internal

show snmp internal information

registered-notifications

show snmp mts registered notifications

Command Mode

- /exec

show snmp internal tcp connections

show snmp internal tcp connections

Syntax Description

Syntax Description

show

Show commands

snmp

show snmp information

internal

show snmp internal information

tcp

show snmp tcp connections

connections

show snmp tcp connections

Command Mode

- /exec

show snmp internal trace log

show snmp internal trace log

Syntax Description

Syntax Description

show

Show commands

snmp

show snmp information

internal

show snmp internal information

trace

show snmp trace log

log

show snmp trace log

Command Mode

- /exec

show snmp internal translate oidorname

show snmp internal translate oidorname <nameoroid>

Syntax Description

Syntax Description

show

Show commands

snmp

show snmp information

internal

show snmp internal information

translate

translate oid to name and name to oid

oidorname

translate oid to name and name to oid

nameoroid

OID or name that needs translation

Command Mode

- /exec

show snmp mib igmpCacheTable

show snmp mib igmpCacheTable [ <igmpCacheAddress-in> ] [ <igmpCacheIfIndex-in> ] [ __readonly__ TABLE_igmpCacheTable <igmpCacheAddress-out> <igmpCacheIfIndex-out> <igmpCacheSelf> <igmpCacheLastReporter> <igmpCacheUpTime> <igmpCacheExpiryTime> <igmpCacheStatus> <igmpCacheVersion1HostTimer> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

igmpCacheTable

show mib table igmpCacheTable

igmpCacheAddress-in

(Optional) igmpCacheAddress

igmpCacheIfIndex-in

(Optional) igmpCacheIfIndex

__readonly__

(Optional)

TABLE_igmpCacheTable

(Optional)

igmpCacheAddress-out

(Optional) mib table index igmpCacheAddress

igmpCacheIfIndex-out

(Optional) mib table index igmpCacheIfIndex

igmpCacheSelf

(Optional) mib object igmpCacheSelf

igmpCacheLastReporter

(Optional) mib object igmpCacheLastReporter

igmpCacheUpTime

(Optional) mib object igmpCacheUpTime

igmpCacheExpiryTime

(Optional) mib object igmpCacheExpiryTime

igmpCacheStatus

(Optional) mib object igmpCacheStatus

igmpCacheVersion1HostTimer

(Optional) mib object igmpCacheVersion1HostTimer

Command Mode

- /exec

show snmp mib igmpInterfaceTable

show snmp mib igmpInterfaceTable [ <igmpInterfaceIfIndex-in> ] [ __readonly__ TABLE_igmpInterfaceTable <igmpInterfaceIfIndex-out> <igmpInterfaceQueryInterval> <igmpInterfaceStatus> <igmpInterfaceVersion> <igmpInterfaceQuerier> <igmpInterfaceQueryMaxResponseTime> <igmpInterfaceQuerierUpTime> <igmpInterfaceQuerierExpiryTime> <igmpInterfaceVersion1QuerierTimer> <igmpInterfaceWrongVersionQueries> <igmpInterfaceJoins> <igmpInterfaceProxyIfIndex> <igmpInterfaceGroups> <igmpInterfaceRobustness> <igmpInterfaceLastMembQueryIntvl> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

igmpInterfaceTable

show mib table igmpInterfaceTable

igmpInterfaceIfIndex-in

(Optional) igmpInterfaceIndex

__readonly__

(Optional)

TABLE_igmpInterfaceTable

(Optional)

igmpInterfaceIfIndex-out

(Optional) mib table index igmpInterfaceIfIndex

igmpInterfaceQueryInterval

(Optional) mib object igmpInterfaceQueryInterval

igmpInterfaceStatus

(Optional) mib object igmpInterfaceStatus

igmpInterfaceVersion

(Optional) mib object igmpInterfaceVersion

igmpInterfaceQuerier

(Optional) mib object igmpInterfaceQuerier

igmpInterfaceQueryMaxResponseTime

(Optional) mib object igmpInterfaceQueryMaxResponseTime

igmpInterfaceQuerierUpTime

(Optional) mib object igmpInterfaceQuerierUpTime

igmpInterfaceQuerierExpiryTime

(Optional) mib object igmpInterfaceQuerierExpiryTime

igmpInterfaceVersion1QuerierTimer

(Optional) mib object igmpInterfaceVersion1QuerierTimer

igmpInterfaceWrongVersionQueries

(Optional) mib object igmpInterfaceWrongVersionQueries

igmpInterfaceJoins

(Optional) mib object igmpInterfaceJoins

igmpInterfaceProxyIfIndex

(Optional) mib object igmpInterfaceProxyIfIndex

igmpInterfaceGroups

(Optional) mib object igmpInterfaceGroups

igmpInterfaceRobustness

(Optional) mib object igmpInterfaceRobustness

igmpInterfaceLastMembQueryIntvl

(Optional) mib object igmpInterfaceLastMembQueryIntvl

Command Mode

- /exec

show snmp mib pimCandidateRPTable

show snmp mib pimCandidateRPTable [ <pimCandidateRPGroupAddress-in> ] [ <pimCandidateRPGroupMask-in> ] [ __readonly__ TABLE_pimCandidateRPTable <pimCandidateRPGroupAddress-out> <pimCandidateRPGroupMask-out> <pimCandidateRPAddress> <pimCandidateRPRowStatus> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

pimCandidateRPTable

show mib table pimCandidateRPTable

pimCandidateRPGroupAddress-in

(Optional) pimCandidateRPGroupAddress

pimCandidateRPGroupMask-in

(Optional) pimCandidateRPGroupMask

__readonly__

(Optional)

TABLE_pimCandidateRPTable

(Optional)

pimCandidateRPGroupAddress-out

(Optional) mib table index pimCandidateRPGroupAddress

pimCandidateRPGroupMask-out

(Optional) mib table index pimCandidateRPGroupMask

pimCandidateRPAddress

(Optional) mib object pimCandidateRPAddress

pimCandidateRPRowStatus

(Optional) mib object pimCandidateRPRowStatus

Command Mode

- /exec

show snmp mib pimComponentTable

show snmp mib pimComponentTable [ <pimComponentIndex-in> ] [ __readonly__ TABLE_pimComponentTable <pimComponentIndex-out> <pimComponentBSRAddress> <pimComponentBSRExpiryTime> <pimComponentCRPHoldTime> <pimComponentStatus> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

pimComponentTable

show mib table pimComponentTable

pimComponentIndex-in

(Optional) pimComponentIndex

__readonly__

(Optional)

TABLE_pimComponentTable

(Optional)

pimComponentIndex-out

(Optional) mib table index pimComponentIndex

pimComponentBSRAddress

(Optional) mib object pimComponentBSRAddress

pimComponentBSRExpiryTime

(Optional) mib object pimComponentBSRExpiryTime

pimComponentCRPHoldTime

(Optional) mib object pimComponentCRPHoldTime

pimComponentStatus

(Optional) mib object pimComponentStatus

Command Mode

- /exec

show snmp mib pimInterfaceTable

show snmp mib pimInterfaceTable [ <pimInterfaceIfIndex-in> ] [ __readonly__ TABLE_pimInterfaceTable <pimInterfaceIfIndex-out> <pimInterfaceAddress> <pimInterfaceNetMask> <pimInterfaceMode> <pimInterfaceDR> <pimInterfaceHelloInterval> <pimInterfaceStatus> <pimInterfaceJoinPruneInterval> <pimInterfaceCBSRPreference> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

pimInterfaceTable

show mib table pimInterfaceTable

pimInterfaceIfIndex-in

(Optional) pimInterfaceIndex

__readonly__

(Optional)

TABLE_pimInterfaceTable

(Optional)

pimInterfaceIfIndex-out

(Optional) mib table index pimInterfaceIfIndex

pimInterfaceAddress

(Optional) mib object pimInterfaceAddress

pimInterfaceNetMask

(Optional) mib object pimInterfaceNetMask

pimInterfaceMode

(Optional) mib object pimInterfaceMode

pimInterfaceDR

(Optional) mib object pimInterfaceDR

pimInterfaceHelloInterval

(Optional) mib object pimInterfaceHelloInterval

pimInterfaceStatus

(Optional) mib object pimInterfaceStatus

pimInterfaceJoinPruneInterval

(Optional) mib object pimInterfaceJoinPruneInterval

pimInterfaceCBSRPreference

(Optional) mib object pimInterfaceCBSRPreference

Command Mode

- /exec

show snmp mib pimIpMRouteNextHopTable

show snmp mib pimIpMRouteNextHopTable [ <ipMRouteNextHopGroup-in> <ipMRouteNextHopSource-in> <ipMRouteNextHopSourceMask-in> <ipMRouteNextHopIfIndex-in> <ipMRouteNextHopAddress-in> ] [ __readonly__ TABLE_pimIpMRouteNextHopTable <ipMRouteNextHopGroup-out> <ipMRouteNextHopSource-out> <ipMRouteNextHopSourceMask-out> <ipMRouteNextHopIfIndex-out> <ipMRouteNextHopAddress-out> <pimIpMRouteNextHopPruneReason> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

pimIpMRouteNextHopTable

show mib table pimIpMRouteNextHopTable

ipMRouteNextHopGroup-in

(Optional) ipMRouteNextHopGroup

ipMRouteNextHopSource-in

(Optional) ipMRouteNextHopSource

ipMRouteNextHopSourceMask-in

(Optional) ipMRouteNextHopSourceMask

ipMRouteNextHopIfIndex-in

(Optional) ipMRouteNextHopIfIndex

ipMRouteNextHopAddress-in

(Optional) ipMRouteNextHopAddress

__readonly__

(Optional)

TABLE_pimIpMRouteNextHopTable

(Optional)

ipMRouteNextHopGroup-out

(Optional) mib table index ipMRouteNextHopGroup

ipMRouteNextHopSource-out

(Optional) mib table index pimComponentBSRAddress

ipMRouteNextHopSourceMask-out

(Optional) mib table index pimComponentBSRExpiryTime

ipMRouteNextHopIfIndex-out

(Optional) mib table index pimComponentCRPHoldTime

ipMRouteNextHopAddress-out

(Optional) mib table index pimComponentStatus

pimIpMRouteNextHopPruneReason

(Optional) mib object pimIpMRouteNextHopPruneReason

Command Mode

- /exec

show snmp mib pimIpMRouteTable

show snmp mib pimIpMRouteTable [ <ipMRouteGroup-in> ] [ <ipMRouteSource-in> ] [ <ipMRouteSourceMask-in> ] [ __readonly__ TABLE_pimIpMRouteTable <ipMRouteGroup-out> <ipMRouteSource-out> <ipMRouteSourceMask-out> <pimIpMRouteUpstreamAssertTimer> <pimIpMRouteAssertMetric> <pimIpMRouteAssertMetricPref> <pimIpMRouteAssertRPTBit> <pimIpMRouteFlags> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

pimIpMRouteTable

show mib table pimIpMRouteTable

ipMRouteGroup-in

(Optional) ipMRouteGroup

ipMRouteSource-in

(Optional) ipMRouteSource

ipMRouteSourceMask-in

(Optional) ipMRouteSourceMask

__readonly__

(Optional)

TABLE_pimIpMRouteTable

(Optional)

ipMRouteGroup-out

(Optional) mib table index ipMRouteGroup-out

ipMRouteSource-out

(Optional) mib table index ipMRouteSource-out

ipMRouteSourceMask-out

(Optional) mib table index ipMRouteSourceMask-out

pimIpMRouteUpstreamAssertTimer

(Optional) mib object pimIpMRouteUpstreamAssertTimer

pimIpMRouteAssertMetric

(Optional) mib object pimIpMRouteAssertMetric

pimIpMRouteAssertMetricPref

(Optional) mib object pimIpMRouteAssertMetricPref

pimIpMRouteAssertRPTBit

(Optional) mib object pimIpMRouteAssertRPTBit

pimIpMRouteFlags

(Optional) mib object pimIpMRouteFlags

Command Mode

- /exec

show snmp mib pimJoinPruneInterval

show snmp mib pimJoinPruneInterval [ __readonly__ <pimJoinPruneInterval> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

pimJoinPruneInterval

show mib scalar pimJoinPruneInterval

__readonly__

(Optional) Read Only

pimJoinPruneInterval

(Optional) mib object pimJoinPruneInterval

Command Mode

- /exec

show snmp mib pimNeighborTable

show snmp mib pimNeighborTable [ <pimNeighborAddress-in> ] [ __readonly__ TABLE_pimNeighborTable <pimNeighborAddress-out> <pimNeighborIfIndex> <pimNeighborUpTime> <pimNeighborExpiryTime> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

pimNeighborTable

show mib table pimNeighborTable

pimNeighborAddress-in

(Optional) pimNeighborAddress

__readonly__

(Optional)

TABLE_pimNeighborTable

(Optional)

pimNeighborAddress-out

(Optional) mib table index pimNeighborAddress

pimNeighborIfIndex

(Optional) mib object pimNeighborIfIndex

pimNeighborUpTime

(Optional) mib object pimNeighborUpTime

pimNeighborExpiryTime

(Optional) mib object pimNeighborExpiryTime

Command Mode

- /exec

show snmp mib pimRPSetTable

show snmp mib pimRPSetTable [ <pimRPSetComponent-in> ] [ <pimRPSetGroupAddress-in> ] [ <pimRPSetGroupMask-in> ] [ <pimRPSetAddress-in> ] [ __readonly__ TABLE_pimRPSetTable <pimRPSetGroupAddress-out> <pimRPSetGroupMask-out> <pimRPSetAddress-out> <pimRPSetHoldTime> <pimRPSetExpiryTime> <pimRPSetComponent-out> ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp

mib

show mib tables

pimRPSetTable

show mib table pimRPSetTable

pimRPSetComponent-in

(Optional) pimRPSetComponent

pimRPSetGroupAddress-in

(Optional) pimRPSetGroupAddress

pimRPSetGroupMask-in

(Optional) pimRPSetGroupMask

pimRPSetAddress-in

(Optional) pimRPSetAddress

__readonly__

(Optional)

TABLE_pimRPSetTable

(Optional)

pimRPSetGroupAddress-out

(Optional) mib table index pimRPSetGroupAddress

pimRPSetGroupMask-out

(Optional) mib table index pimRPSetGroupMask

pimRPSetAddress-out

(Optional) mib table index pimRPSetAddress

pimRPSetHoldTime

(Optional) mib object pimRPSetHoldTime

pimRPSetExpiryTime

(Optional) mib object pimRPSetExpiryTime

pimRPSetComponent-out

(Optional) mib table index pimRPSetComponent

Command Mode

- /exec

show snmp pss

show snmp pss

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

pss

show SNMP pss

Command Mode

- /exec

show snmp roledebug

show snmp roledebug

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

roledebug

show SNMP roledebug

Command Mode

- /exec

show snmp sessions

show snmp sessions [ __readonly__ { TABLE_session <dest> } ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

sessions

show snmp sessions

__readonly__

(Optional) Read Only

TABLE_session

(Optional) table displays destination

dest

(Optional) destination

Command Mode

- /exec

show snmp snmpv3stats

show snmp snmpv3stats

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

snmpv3stats

show SNMP snmpdebug

Command Mode

- /exec

show snmp source-interface

show snmp source-interface [ __readonly__ { <trap_srcintf> <informs_srcintf> } ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

source-interface

show source-interface through which notifications are sent

__readonly__

(Optional) Read Only

trap_srcintf

(Optional) Displays the source interface for traps

informs_srcintf

(Optional) Displays the source interface for informs

Command Mode

- /exec

show snmp trap

show snmp trap [ __readonly__ { TABLE_snmp_trap <trap_type><description><isEnabled> } ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

trap

show snmp traps

__readonly__

(Optional) Read Only

TABLE_snmp_trap

(Optional) All snmp traps configured

Command Mode

- /exec

show snmp user

show snmp user [ <s0> [ engineID <s1> ] ] [ __readonly__ [ { TABLE_snmp_users <user> <auth> <priv> [ { TABLE_groups <group> } ] [ <acl_filter> ] [ <engineID> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

snmp

show snmp information

user

show SNMPv3 users

s0

(Optional) Name of the user

engineID

(Optional) engineID

s1

(Optional) Target's SNMP engineID(colon separated) for SNMPv3 inform

__readonly__

(Optional) Read Only

TABLE_snmp_users

(Optional) table displays the snmp users

TABLE_groups

(Optional) table displays the gropus for specific user

user

(Optional) user name

auth

(Optional) auth type

priv

(Optional) priv type

group

(Optional) group belongs to

acl_filter

(Optional) acl filter

engineID

(Optional) engineID for specific user

Command Mode

- /exec

show snmpmib internal errors

show snmpmib internal [ event-history ] errors

Syntax Description

Syntax Description

show

Show running system information

snmpmib

Show information about snmpmib

internal

Show internal snmpmib information

event-history

(Optional) Show various event logs of Snmpmib_procs

errors

Show error logs of SNMPMIB_PROC

Command Mode

- /exec

show snmpmib internal info

show snmpmib internal info [ { global } ]

Syntax Description

Syntax Description

show

Show running system information

snmpmib

Show information about snmpmib

internal

Show internal snmpmib information

info

Show internal data structure information

global

(Optional) Display snmpmib global info

Command Mode

- /exec

show snmpmib internal mem-stats

show snmpmib internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

snmpmib

Show information about snmpmib

internal

Show internal snmpmib information

mem-stats

Show memory allocation statistics of SNMPMIB_PROC

detail

(Optional) Show detail memstats for F_Port Server

Command Mode

- /exec

show snmpmib internal msgs

show snmpmib internal [ event-history ] msgs

Syntax Description

Syntax Description

show

Show running system information

snmpmib

Show information about snmpmib

internal

Show internal snmpmib information

event-history

(Optional) Show various event logs of Snmpmib_procs

msgs

Show various message logs of SNMPMIB_PROC

Command Mode

- /exec

show sockets buffers

show sockets buffers [ { [ all <count> ] [ free <count> ] } ]

Syntax Description

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

buffers

Display detailed buffer statistics

all

(Optional) Dump buffers from ALL list

free

(Optional) Dump buffers from FREE list

count

(Optional) Number of buffers to dump

Command Mode

- /exec

show sockets client

show sockets client { [ pid <pid> ] [ tcp | udp | raw ] [ detail ] [ kstack-ns-all ] } [ __readonly__ [ TABLE_total_clients [ <socket-type> <total-clients> ] [ <no-total-clients> ] ] [ TABLE_cl_sk { <prefix> <client-name> <pid> <No-of-clients> } [ <fast-tcp-mts-ctrl-q> ] [ { <cancel-requests> <cancel-unblocks> <cancel-misses> <select-drops> <select-wakes> } ] [ TABLE_det [ { <fd> <client-id> [ <mts-sap> ] } ] ] [ TABLE_st [ <soc-calls> ] [ <bind-calls> ] [ <listen-calls> ] [ <accept-calls> ] [ <acc-dispat-err> ] [ <connect-calls> ] [ <connec-dispatch> ] [ <recvmsg-dispatch> ] [ <recv-dis-nblock> ] [ <recvmsg-call> ] [ <brecv-dispatch> ] [ <fsendmsg-calls> ] [ <sendmsg-dispatch> ] [ <sendmsg-calls> ] [ <msendmsg-calls> ] [ <select-calls> ] [ <select-dispatch> ] [ <select-need-work> ] [ <sh-calls> ] [ <close-calls> ] [ <fcntl-calls> ] [ <ioctl-calls> ] [ <setsock-calls> ] [ <getsock-calls> ] [ <getsockname-calls> ] [ <getpeer-calls> ] [ <fork-calls> ] [ <execve-calls> ] [ <dup-calls> ] [ <can-calls> ] [ <can-miss> ] [ <can-unblk-sele> ] [ <soc-ha-calls> ] [ <pfork-client> ] [ <read-fd> ] [ <write-fd> ] [ <read-fd-set> ] [ <write-fd-set> ] [ <fast-tcp-send-req> ] [ <fast-tcp-send-suc> ] [ <fast-tcp-ack> ] ] [ TABLE_sterr [ <sock-err> ] [ <sock-nodev-err> ] [ <bind-err> ] [ <lis-err> ] [ <accept-err> ] [ <connect-err> ] [ <recvmsg-err> ] [ <brcvmsg-err> ] [ <fsendmsg-err> ] [ <sendmsg-err> ] [ <msndmsg-err> ] [ <select-err> ] [ <sel-nomem-err> ] [ <shut-err> ] [ <close-err> ] [ <fcntl-err> ] [ <ioctl-err> ] [ <setsoc-err> ] [ <getsoc-err> ] [ <getsocname-err> ] [ <getpeername-err> ] [ <fork-err> ] [ <execve-err> ] [ <dup-err> ] [ <psoc-vrf-err> ] [ <psoc-nosoc-err> ] [ <psoc-sock-null-err> ] [ <psoc-socre-err> ] [ <pbind-nsock-err> ] [ <pbd-getsocaddr> ] [ <pbind-sobind-err> ] [ <plisten-nsoc-err> ] [ <plis-solis-err> ] [ <pacc-nsoc-err> ] [ <pacc-no-nsoc-err> ] [ <pacc-soc-null-err> ] [ <pacc-copy-err> ] [ <pacc-no-acc-err> ] [ <pacc-woublo-err> ] [ <pacc-connabo-err> ] [ <pacc-cond-wait-err> ] [ <pacc-so-err-err> ] [ <pacc-err-err> ] [ <pcon-no-soc-err> ] [ <pcon-ealready-err> ] [ <pconn-getsock> ] [ <pconn-socon-err> ] [ <pconn-einpro-err> ] [ <pconn-con-wait-err> ] [ <psend-no-soc-err> ] [ <psend-inval-iov> ] [ <psend-getsoc-err> ] [ <psend-msg-ctrl-err> ] [ <psend-sockarg-err> ] [ <psend-pru-sosend> ] [ <precv-nosock-err> ] [ <precv-inval-iovlen> ] [ <precv-pru-sorecv> ] [ <precv-cp-msg-err> ] [ <precv-cp-msg-nlen> ] [ <precv-cp-data-err> ] [ <pbrecv-rcvmsg-err> ] [ <pshut-no-soc-err> ] [ <psetsoc-val-err> ] [ <psetsoc-inv-val> ] [ <psetsoc-no-soc-err> ] [ <psetsoc-sosetopt> ] [ <pgetsoc-no-socerr> ] [ <pgetsoc-cp-err> ] [ <pgetsoc-val-err> ] [ <pgetsoc-sogt-err> ] [ <pgtsoc-no-soc-err> ] [ <pgtsoc-cp-err> ] [ <pgtsoc-pru-soc-err> ] [ <pgtsoc-cpout-err> ] [ <pgtprne-no-soc-err> ] [ <pgtprne-enot-err> ] [ <pgtprne-cp-err> ] [ <pgtprne-pru-pradd> ] [ <pgtprne-cpout-err> ] [ <pclose-no-soc-err> ] [ <pclose-socnull-err> ] [ <pclose-p-cls2-err> ] [ <pfcntl-no-soc-err> ] [ <pfcntl-soc-null> ] [ <pfcntl-enotsup> ] [ <pfcntl-einval-err> ] [ <pioctl-no-soc-err> ] [ <pioctl-enotsup> ] [ <pioctl-pru-cntl> ] [ <pfork-enomem-err> ] [ <pdup-no-soc-err> ] [ <pudp-soc-null-err> ] [ <ha-nomem-err> ] [ <ha-tlv-err> ] [ <ha-soc-arg-err> ] [ <ha-cli-tlv-err> ] [ <ha-pss-upd-err> ] [ <ha-no-soc-err> ] [ <ha-soc-tlv-err> ] [ <ha-soc-pss-upd> ] [ <ha-inpcb-tlv> ] [ <ha-inpcb-pssky> ] [ <ha-ip-mopt-tlv> ] [ <ha-ip-mopt-pss> ] [ <ha-ip6-mopt-tlv> ] [ <ha-ip6-mopt-pss> ] [ <ha-tcpcb-tlv> ] [ <ha-tcpcb-pss> ] [ <ft-tcp-wblock> ] [ <ft-send-p-sndmsg> ] [ <ft-ack-rcv-no-soc> ] [ <lxc-tgid-err> ] ] [ TABLE_sp_cl [ <can-requests> <can-unblocks> <can-misses> <sel-drops> <sel-wakes> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

client

Display sockets client information

pid

(Optional) Display specific client process information

pid

(Optional) Display client process <pid>

tcp

(Optional) Display TCP clients

udp

(Optional) Display UDP clients

raw

(Optional) Display RAW clients

detail

(Optional) Display socket details

kstack-ns-all

(Optional) Show kernel clients for all namespaces

__readonly__

(Optional)

TABLE_total_clients

(Optional) Total no of client sockets

socket-type

(Optional) Sockets type

total-clients

(Optional)

no-total-clients

(Optional)

TABLE_cl_sk

(Optional) Display Client sockets

prefix

(Optional) Prefix to the sockets

client-name

(Optional) Display socket client info

pid

(Optional) Display client process <pid>

No-of-clients

(Optional) Number of socket clients

fast-tcp-mts-ctrl-q

(Optional)

cancel-requests

(Optional)

cancel-unblocks

(Optional)

cancel-misses

(Optional)

select-drops

(Optional)

select-wakes

(Optional)

TABLE_det

(Optional) Display Socket client Details

fd

(Optional) Client socket fd

client-id

(Optional) Client socket id

mts-sap

(Optional) socket mts addr sap

TABLE_st

(Optional) Sock detail Ctrl statistics

soc-calls

(Optional)

bind-calls

(Optional)

listen-calls

(Optional)

accept-calls

(Optional)

acc-dispat-err

(Optional)

connect-calls

(Optional)

connec-dispatch

(Optional)

recvmsg-dispatch

(Optional)

recv-dis-nblock

(Optional)

recvmsg-call

(Optional)

brecv-dispatch

(Optional)

fsendmsg-calls

(Optional)

sendmsg-dispatch

(Optional)

sendmsg-calls

(Optional)

msendmsg-calls

(Optional)

select-calls

(Optional)

select-dispatch

(Optional)

select-need-work

(Optional)

sh-calls

(Optional)

close-calls

(Optional)

fcntl-calls

(Optional)

ioctl-calls

(Optional)

setsock-calls

(Optional)

getsock-calls

(Optional)

getsockname-calls

(Optional)

getpeer-calls

(Optional)

fork-calls

(Optional)

execve-calls

(Optional)

dup-calls

(Optional)

can-calls

(Optional)

can-miss

(Optional)

can-unblk-sele

(Optional)

soc-ha-calls

(Optional)

pfork-client

(Optional)

read-fd

(Optional)

write-fd

(Optional)

read-fd-set

(Optional)

write-fd-set

(Optional)

fast-tcp-send-req

(Optional)

fast-tcp-send-suc

(Optional)

fast-tcp-ack

(Optional)

TABLE_sterr

(Optional) Client Socket Error Statistics

sock-err

(Optional)

sock-nodev-err

(Optional)

bind-err

(Optional)

lis-err

(Optional)

accept-err

(Optional)

connect-err

(Optional)

recvmsg-err

(Optional)

brcvmsg-err

(Optional)

fsendmsg-err

(Optional)

sendmsg-err

(Optional)

msndmsg-err

(Optional)

select-err

(Optional)

sel-nomem-err

(Optional)

shut-err

(Optional)

close-err

(Optional)

fcntl-err

(Optional)

ioctl-err

(Optional)

setsoc-err

(Optional)

getsoc-err

(Optional)

getsocname-err

(Optional)

getpeername-err

(Optional)

fork-err

(Optional)

execve-err

(Optional)

dup-err

(Optional)

psoc-vrf-err

(Optional)

psoc-nosoc-err

(Optional)

psoc-sock-null-err

(Optional)

psoc-socre-err

(Optional)

pbind-nsock-err

(Optional)

pbd-getsocaddr

(Optional)

pbind-sobind-err

(Optional)

plisten-nsoc-err

(Optional)

plis-solis-err

(Optional)

pacc-nsoc-err

(Optional)

pacc-no-nsoc-err

(Optional)

pacc-soc-null-err

(Optional)

pacc-copy-err

(Optional)

pacc-no-acc-err

(Optional)

pacc-woublo-err

(Optional)

pacc-connabo-err

(Optional)

pacc-cond-wait-err

(Optional)

pacc-so-err-err

(Optional)

pacc-err-err

(Optional)

pcon-no-soc-err

(Optional)

pcon-ealready-err

(Optional)

pconn-getsock

(Optional)

pconn-socon-err

(Optional)

pconn-einpro-err

(Optional)

pconn-con-wait-err

(Optional)

psend-no-soc-err

(Optional)

psend-inval-iov

(Optional)

psend-getsoc-err

(Optional)

psend-msg-ctrl-err

(Optional)

psend-sockarg-err

(Optional)

psend-pru-sosend

(Optional)

precv-nosock-err

(Optional)

precv-inval-iovlen

(Optional)

precv-pru-sorecv

(Optional)

precv-cp-msg-err

(Optional)

precv-cp-msg-nlen

(Optional)

precv-cp-data-err

(Optional)

pbrecv-rcvmsg-err

(Optional)

pshut-no-soc-err

(Optional)

psetsoc-val-err

(Optional)

psetsoc-inv-val

(Optional)

psetsoc-no-soc-err

(Optional)

psetsoc-sosetopt

(Optional)

pgetsoc-no-socerr

(Optional)

pgetsoc-cp-err

(Optional)

pgetsoc-val-err

(Optional)

pgetsoc-sogt-err

(Optional)

pgtsoc-no-soc-err

(Optional)

pgtsoc-cp-err

(Optional)

pgtsoc-pru-soc-err

(Optional)

pgtsoc-cpout-err

(Optional)

pgtprne-no-soc-err

(Optional)

pgtprne-enot-err

(Optional)

pgtprne-cp-err

(Optional)

pgtprne-pru-pradd

(Optional)

pgtprne-cpout-err

(Optional)

pclose-no-soc-err

(Optional)

pclose-socnull-err

(Optional)

pclose-p-cls2-err

(Optional)

pfcntl-no-soc-err

(Optional)

pfcntl-soc-null

(Optional)

pfcntl-enotsup

(Optional)

pfcntl-einval-err

(Optional)

pioctl-no-soc-err

(Optional)

pioctl-enotsup

(Optional)

pioctl-pru-cntl

(Optional)

pfork-enomem-err

(Optional)

pdup-no-soc-err

(Optional)

pudp-soc-null-err

(Optional)

ha-nomem-err

(Optional)

ha-tlv-err

(Optional)

ha-soc-arg-err

(Optional)

ha-cli-tlv-err

(Optional)

ha-pss-upd-err

(Optional)

ha-no-soc-err

(Optional)

ha-soc-tlv-err

(Optional)

ha-soc-pss-upd

(Optional)

ha-inpcb-tlv

(Optional)

ha-inpcb-pssky

(Optional)

ha-ip-mopt-tlv

(Optional)

ha-ip-mopt-pss

(Optional)

ha-ip6-mopt-tlv

(Optional)

ha-ip6-mopt-pss

(Optional)

ha-tcpcb-tlv

(Optional)

ha-tcpcb-pss

(Optional)

ft-tcp-wblock

(Optional)

ft-send-p-sndmsg

(Optional)

ft-ack-rcv-no-soc

(Optional)

lxc-tgid-err

(Optional) Containers tgid err

TABLE_sp_cl

(Optional) Sock specific Ctrl statistics

can-requests

(Optional)

can-unblocks

(Optional)

can-misses

(Optional)

sel-drops

(Optional)

sel-wakes

(Optional)

Command Mode

- /exec

show sockets connection

show sockets connection [ pid <pid> | tcp | udp | raw ] [ local { <srcIP> | <srcIP6> } ] [ foreign { <dstIP> | <dstIP6> } ] [ detail ] [ keydetails ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_conn <prot> <tcp-state> <rcv-count> <laddr> <lport> <faddr> <fport> <intf> <rcv-count> <snd-count> <type> <ttl> <tos> <options> <state> <iss> <snd-una> <snd-nxt> <snd_wnd> <irs> <rcv-nxt> <rcv-wnd> <snd-cwnd> <srtt> <rtt> <rttvar> <krtt> <rttmin> <mss> <dur> <flags> <md5-cnt> <md5-host> <md5-err> <rcv-hiwat> <rcv-lowat> <rcv-flags> <snd-hiwat> <snd-lowat> <snd-flags> <tcp-count> <udp-count> <raw-count> ]

Syntax Description

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

connection

Display connection information

pid

(Optional) Display specific client process connection status

pid

(Optional) Display client process connection status <pid>

tcp

(Optional) Display all TCP connections

udp

(Optional) Display all UDP connections

raw

(Optional) Display all raw connections

local

(Optional) Display all TCP connections with specified local address

srcIP

(Optional) Display all TCP connections with specified local address

foreign

(Optional) Display all TCP connections with specified foreign address

dstIP

(Optional) Display all TCP connections with specified foreign address

detail

(Optional) Display detailed connection infomation

keydetails

(Optional) Display md5 key specific details

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_conn

(Optional)

prot

(Optional)

tcp-state

(Optional)

rcv-count

(Optional)

laddr

(Optional)

lport

(Optional)

faddr

(Optional)

fport

(Optional)

intf

(Optional)

snd-count

(Optional)

type

(Optional)

ttl

(Optional)

tos

(Optional)

options

(Optional)

state

(Optional)

iss

(Optional)

snd-una

(Optional)

snd-nxt

(Optional)

snd_wnd

(Optional)

irs

(Optional)

rcv-nxt

(Optional)

rcv-wnd

(Optional)

snd-cwnd

(Optional)

srtt

(Optional)

rtt

(Optional)

rttvar

(Optional)

krtt

(Optional)

rttmin

(Optional)

mss

(Optional)

dur

(Optional)

flags

(Optional)

md5-cnt

(Optional)

md5-host

(Optional)

md5-err

(Optional)

rcv-hiwat

(Optional)

rcv-lowat

(Optional)

rcv-flags

(Optional)

snd-hiwat

(Optional)

snd-lowat

(Optional)

snd-flags

(Optional)

tcp-count

(Optional)

udp-count

(Optional)

raw-count

(Optional)

Command Mode

- /exec

show sockets internal dispatch

show sockets internal { dispatch-statistics | { mem-stats [ detail ] } }

Syntax Description

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

internal

Display internal sockets information

dispatch-statistics

Display internal dispatch thread details

mem-stats

Show memory allocation statistics

detail

(Optional) Display detailed information

Command Mode

- /exec

show sockets internal event-history

show sockets internal event-history { errors | msgs | setup | ha | events | proto | log }

Syntax Description

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

internal

Display internal sockets information

event-history

Show various event logs of sockets

errors

Show error logs of sockets

msgs

Show various message logs of sockets

setup

Show setup debug message of sockets

ha

Show ha debug message of sockets

events

Show events/pcb debug message of sockets

proto

Show tcp/udp/raw ip debug message of sockets

log

Show syslog message of sockets

Command Mode

- /exec

show sockets internal event-history buffer-size

show sockets internal event-history buffer-size { errors | msgs | setup | ha | events | proto | log | all }

Syntax Description

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

buffer-size

Show current size of the buffers

internal

Display internal sockets information

event-history

Show various event logs of sockets

errors

Show error logs buffer size of sockets

msgs

Show various message logs buffer size of sockets

setup

Show setup debug message buffer size of sockets

ha

Show ha debug message buffer size of sockets

events

Show events/pcb debug message buffer size of sockets

proto

Show tcp/udp/raw ip debug message buffer size of sockets

log

Show syslog message buffer size of sockets

all

Show sizes of all event history buffers

Command Mode

- /exec

show sockets keychain-dump

show sockets keychain-dump

Syntax Description

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

keychain-dump

Dump the pss information for keychains

Command Mode

- /exec

show sockets local-port-range

show sockets local-port-range [ __readonly__ <kstack_local_port_range_start> <kstack_local_port_range_end> <netstack_local_port_range_start> <netstack_local_port_range_end> ]

Syntax Description

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

local-port-range

Display local port range

__readonly__

(Optional)

kstack_local_port_range_start

(Optional) Kstack local port range start

kstack_local_port_range_end

(Optional) Kstack local port range end

netstack_local_port_range_start

(Optional) Netstack local port range start

netstack_local_port_range_end

(Optional) Netstack local port range end

Command Mode

- /exec

show sockets performance

show sockets performance [ clear ]

Syntax Description

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

performance

Display detailed perf statistics

clear

(Optional) Clear perf statistics

Command Mode

- /exec

show sockets secure-lxc

show sockets secure-lxc

Syntax Description

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

secure-lxc

Display secure-container sockets information

Command Mode

- /exec

show sockets statistics

show sockets statistics [ all | tcp | tcp6 | tcpsum | udp | udp6 | udpsum | raw | raw6 | rawsum ] [ __readonly__ TABLE_vrf <vrf-name-out> TABLE_afi <afi> TABLE_stat <version> <rx-total> <rx-bad-csum> <rx-bad-offset> <rx-too-short> <rx-bad-md5> <rx-inseq-pack> <rx-inseq-bytes> <rx-dup-pack> <rx-dup-bytes> <rx-partdup-pack> <rx-partdup-bytes> <rx-oo-pack> <rx-oo-bytes> <rx-afterwin-pack> <rx-afterwin-bytes> <rx-afterclose-pack> <rx-winprobe-pack> <rx-winupdate-pack> <rx-dupack-pack> <rx-dupack-unsent-pack> <rx-ack-pack> <rx-ack-bytes> <tx-total> <tx-urg> <tx-ctrl> <tx-data-pack> <tx-data-bytes> <tx-reasm-pack> <tx-reasm-bytes> <tx-ackonly-pack> <tx-winprobe-pack> <tx-winupdate-bytes> <tx-conn-init> <tx-conn-accepted> <tx-conn-estd> <tx-rxmt-timeout> <tx-rxmt-timeout-dropped> <tx-ka-timeout> <tx-ka-probe> <tx-ka-drop> <closed> <dropped> <emb-dropped> <udp-rx-total> <udp-rx-bad-csum> <udp-rx-no-csum> <udp-rx-too-short> <udp-rx-bad-len> <udp-rx-no-port> <udp-rx-no-port-bcast> <udp-rx-no-port-mcast> <udp-rx-full-socket-drop> <udp-tx-total> <raw-rx-rcvd> <raw-rx-no-port> <raw-rx-full-socket-drop> <raw-tx-sent> ]

Syntax Description

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

statistics

Display sockets statistics

all

(Optional) Display TCP/UDP/RAW v4/v6 protocols statistics

tcp

(Optional) Display TCP v4 protocol statistics

tcp6

(Optional) Display TCP v6 protocol statistics

tcpsum

(Optional) Display sum of TCP v4 and TCP v6 protocols statistics

udp

(Optional) Display UDP v4 protocol statistics

udp6

(Optional) Display UDP v6 protocol statistics

udpsum

(Optional) Display sum of UDP v4 and UDP v6 protocols statistics

raw

(Optional) Display RAW v4 protocol statistics

raw6

(Optional) Display RAW v6 protocol statistics

rawsum

(Optional) Display sum of RAW v4 and RAW v6 protocols statistics

__readonly__

(Optional)

TABLE_vrf

(Optional)

vrf-name-out

(Optional)

TABLE_afi

(Optional)

afi

(Optional)

TABLE_stat

(Optional)

rx-total

(Optional)

rx-bad-csum

(Optional)

rx-bad-offset

(Optional)

rx-too-short

(Optional)

rx-bad-md5

(Optional)

rx-inseq-pack

(Optional)

rx-inseq-bytes

(Optional)

rx-dup-pack

(Optional)

rx-dup-bytes

(Optional)

rx-partdup-pack

(Optional)

rx-partdup-bytes

(Optional)

rx-oo-pack

(Optional)

rx-oo-bytes

(Optional)

rx-afterwin-pack

(Optional)

rx-afterwin-bytes

(Optional)

rx-afterclose-pack

(Optional)

rx-winprobe-pack

(Optional)

rx-winupdate-pack

(Optional)

rx-dupack-pack

(Optional)

rx-dupack-unsent-pack

(Optional)

rx-ack-pack

(Optional)

rx-ack-bytes

(Optional)

tx-total

(Optional)

tx-urg

(Optional)

tx-ctrl

(Optional)

tx-data-pack

(Optional)

tx-data-bytes

(Optional)

tx-reasm-pack

(Optional)

tx-reasm-bytes

(Optional)

tx-ackonly-pack

(Optional)

tx-winprobe-pack

(Optional)

tx-winupdate-bytes

(Optional)

tx-conn-init

(Optional)

tx-conn-accepted

(Optional)

tx-conn-estd

(Optional)

tx-rxmt-timeout

(Optional)

tx-rxmt-timeout-dropped

(Optional)

tx-ka-timeout

(Optional)

tx-ka-probe

(Optional)

tx-ka-drop

(Optional)

closed

(Optional)

dropped

(Optional)

emb-dropped

(Optional)

udp-rx-total

(Optional)

udp-rx-bad-csum

(Optional)

udp-rx-no-csum

(Optional)

udp-rx-too-short

(Optional)

udp-rx-bad-len

(Optional)

udp-rx-no-port

(Optional)

udp-rx-no-port-bcast

(Optional)

udp-rx-no-port-mcast

(Optional)

udp-rx-full-socket-drop

(Optional)

udp-tx-total

(Optional)

raw-rx-rcvd

(Optional)

raw-rx-no-port

(Optional)

raw-rx-full-socket-drop

(Optional)

raw-tx-sent

(Optional)

version

(Optional)

Command Mode

- /exec

show sockets tcp keychain binding

show sockets tcp keychain binding [ __readonly__ { TABLE_keychain <keychain> <handle> <ref_count> } ]

Syntax Description

Syntax Description

show

Show running system information

sockets

Display sockets status and configuration

tcp

TCP information

keychain

Keychain information

binding

Binding information reagarding RPM

__readonly__

(Optional)

TABLE_keychain

(Optional) all sockets tcp keychains

keychain

(Optional) xml keychain information

handle

(Optional) xml handle information

ref_count

(Optional) xml refcount information

Command Mode

- /exec

show spanning-tree

show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] [ __readonly__ TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <port_count> <bridge_mac> <bridge_priority> <tree_designated_root> <tree_designated_root_priority> <stp_active> <root_path_cost> <root_port_if_index> <root_port_priority> <root_port_number> <topology_change> <topology_change_detected> <topology_change_count> <topology_change_time_since_last> <tc_initiator_if_index> <bridge_forward_delay> <bridge_max_age> <bridge_hello_time> <max_age> <hello_time> <forward_delay> <hold_time> <hello_timer> <topology_change_timer> <tcn_timer> <aging_timer> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> TABLE_port <if_index> <vpc> <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> [ <oper_networkport> ] <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> <pvstsim_inc_timer> [ <boundary> ] [ <simulate_pvst_cfg> ] [ <simulate_pvst> ] [ <prestd> ] ]

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

__readonly__

(Optional) Read Only

TABLE_tree

(Optional)

tree_id

(Optional) Tree Id

tree_tree_type

(Optional) Tree Type

tree_protocol

(Optional) Tree Protocol

port_count

(Optional) Number of Ports in Tree

bridge_mac

(Optional) Bridge Mac

bridge_priority

(Optional) Bridge Priority

tree_designated_root

(Optional) Designated Root Mac

tree_designated_root_priority

(Optional) Designated Root Priority

stp_active

(Optional) Spanning Tree State

root_path_cost

(Optional) Root Path Cost

root_port_if_index

(Optional) Root Port

root_port_priority

(Optional) Root Port Priority

root_port_number

(Optional) Root Port Number

topology_change

(Optional) Topology Change flag is set ?

topology_change_detected

(Optional) Topology Change detected flag is set ?

topology_change_count

(Optional) Topology Change Count

topology_change_time_since_last

(Optional) Time since last TC

tc_initiator_if_index

(Optional) Topology Change initiator port

max_age

(Optional) Max Age

hello_time

(Optional) Hello Time

forward_delay

(Optional) Forward delay

bridge_max_age

(Optional) Configured Bridge Max Age

bridge_hello_time

(Optional) Configured Hello Time

bridge_forward_delay

(Optional) Configured Forward Delay

hold_time

(Optional) Configured Hold Time

hello_timer

(Optional) Hello Timer Value

topology_change_timer

(Optional) Topology Change Timer Value

tcn_timer

(Optional) TCN Timer Value

aging_timer

(Optional) Ageing Timer Value

disabled

(Optional) Number of ports Disabled

blocking

(Optional) Number of ports Blocking

listening

(Optional) Number of ports Listening

learning

(Optional) Number of ports Learning

forwarding

(Optional) Number of ports Forwarding

invalid

(Optional) Number of ports Invalid

TABLE_port

(Optional)

if_index

(Optional) Interface

vpc

(Optional) STP Port memebr of MCT/VPC PO

state

(Optional) STP Port State

role

(Optional) STP Port Role

port_priority

(Optional) Port priority

port_number

(Optional) Port Number

port_info_tree_id

(Optional) Tree Id

port_tree_type

(Optional) Tree Type

port_protocol

(Optional) Tree Protocol

path_cost

(Optional) Cost configured on this port

port_designated_root

(Optional) Designated Root Mac

port_designated_root_priority

(Optional) Designated Root Priority

designated_cost

(Optional) Designated cost

designated_bridge

(Optional) Designated bridge mac

designated_bridge_priority

(Optional) Designated bridge priority

designated_port

(Optional) Designated Port Id

tc_acknowledge

(Optional) Is topology change acknowledge flag set ?

forward_transition_count

(Optional) Port transitions to Forwarding

self_looped

(Optional) Is Port self looped ?

inconsistency

(Optional) PVST+ Inconsistency Error Flags

bpdus_in

(Optional) BPDUs received on this stp port

bpdus_out

(Optional) BPDUs send on this stp port

port_fast

(Optional) Port Fast configured on port

link_type

(Optional) Link type configured on this port

port_guard

(Optional) Port Guard mode of port

bpdu_guard

(Optional) Bpdu Guard mode configured

bpdu_filter

(Optional) Bpdu Filter mode configured

oper_portfast

(Optional) Is portfast enabled ?

oper_p2p

(Optional) Is port P2P ?

oper_loopguard

(Optional) Is loopguard enabled ?

oper_bpduguard

(Optional) Is bpduguard enabled ?

oper_bpdufilter

(Optional) Is bpdufilter enabled ?

int_bpdufilter

(Optional) Is internal bpdufilter enabled ?

forward_delay_timer

(Optional) Forward Delay timer

hold_timer

(Optional) Hold Timer

message_age

(Optional) Message age timer

peer

(Optional) STP protocol of the peer

dispute

(Optional) Is port Disputed ?

pvstsim_inc_timer

(Optional) PVST Simulation Inconsistency Hold Timer

boundary

(Optional) Is port boundary ?

prestd

(Optional) Is port Pre STD MST ?

simulate_pvst

(Optional) Is port is pvst simulate mode ?

oper_networkport

(Optional) Is network port enabled ?

simulate_pvst_cfg

(Optional) PVST Simulation configured on port

Command Mode

- /exec

show spanning-tree

show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] { <verbosity> | active } +

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

verbosity

verbosity

active

Report on active interfaces only

Command Mode

- /exec

show spanning-tree blockedports

{ show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] blockedports }

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

blockedports

Show blocked ports

Command Mode

- /exec

show spanning-tree bridge

{ show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] bridge [ priority [ system-id ] ] } | { show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] bridge [ { detail | brief } ] } | { show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] bridge [ { address | forward-time | hello-time | id | max-age | protocol } ] }

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

bridge

Status and configuration of this bridge

address

(Optional) Mac address of this bridge

forward-time

(Optional) Forward delay interval

hello-time

(Optional) Hello time

id

(Optional) Spanning tree bridge identifier

max-age

(Optional) Max age

protocol

(Optional) Spanning tree protocol

brief

(Optional) Brief summary of the status and configuration output

detail

(Optional) Detailed of the status and configuration

priority

(Optional) Bridge priority of this bridge

system-id

(Optional) Spanning tree priority with system id extension

Command Mode

- /exec

show spanning-tree inconsistentports

{ show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] inconsistentports }

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

inconsistentports

Show inconsistent ports

Command Mode

- /exec

show spanning-tree interface

show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] interface <interface-id> [ __readonly__ TABLE_port <if_index> <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> <pvstsim_inc_timer> <prestd> <boundary> <simulate_pvst> <oper_networkport> <simulate_pvst_cfg> ]

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

interface

Spanning Tree interface status and configuration

interface-id

__readonly__

(Optional) Read Only

TABLE_port

(Optional)

if_index

(Optional) Interface

port_info_tree_id

(Optional) Tree Id

state

(Optional) STP Port State

role

(Optional) STP Port Role

port_priority

(Optional) Port priority

port_number

(Optional) Port Number

port_tree_type

(Optional) Tree Type

port_protocol

(Optional) Tree Protocol

path_cost

(Optional) Cost configured on this port

port_designated_root

(Optional) Designated Root Mac

port_designated_root_priority

(Optional) Designated Root Priority

designated_cost

(Optional) Designated cost

designated_bridge

(Optional) Designated bridge mac

designated_bridge_priority

(Optional) Designated bridge priority

designated_port

(Optional) Designated Port Id

tc_acknowledge

(Optional) Is topology change acknowledge flag set ?

forward_transition_count

(Optional) Port transitions to Forwarding

self_looped

(Optional) Is Port self looped ?

inconsistency

(Optional) PVST+ Inconsistency Error Flags

bpdus_in

(Optional) BPDUs received on this stp port

bpdus_out

(Optional) BPDUs send on this stp port

port_fast

(Optional) Port Fast configured on port

link_type

(Optional) Link type configured on this port

port_guard

(Optional) Port Guard mode of port

bpdu_guard

(Optional) Bpdu Guard mode configured

bpdu_filter

(Optional) Bpdu Filter mode configured

oper_portfast

(Optional) Is portfast enabled ?

oper_p2p

(Optional) Is port P2P ?

oper_loopguard

(Optional) Is loopguard enabled ?

oper_bpduguard

(Optional) Is bpduguard enabled ?

oper_bpdufilter

(Optional) Is bpdufilter enabled ?

int_bpdufilter

(Optional) Is internal bpdufilter enabled ?

forward_delay_timer

(Optional) Forward Delay timer

hold_timer

(Optional) Hold Timer

message_age

(Optional) Message age timer

peer

(Optional) STP protocol of the peer

dispute

(Optional) Is port Disputed ?

pvstsim_inc_timer

(Optional) PVST Simulation Inconsistency Hold Timer

boundary

(Optional) Is port boundary ?

prestd

(Optional) Is port Pre STD MST ?

simulate_pvst

(Optional) Is port is pvst simulate mode ?

oper_networkport

(Optional) Is network port enabled ?

simulate_pvst_cfg

(Optional) PVST Simulation configured on port

Command Mode

- /exec

show spanning-tree interface

show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] interface <interface-id> { <verbosity> | active } +

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

interface

Spanning Tree interface status and configuration

interface-id

verbosity

verbosity

active

Report on active instances only

Command Mode

- /exec

show spanning-tree interface

{ show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] interface <interface-id> { cost | inconsistency | edge | priority | rootcost | state } }

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

interface

Spanning Tree interface status and configuration

interface-id

cost

Port path cost

inconsistency

Port inconsistency state

edge

Edge Port configuration

priority

Port priority

rootcost

Path cost to root

state

Port spanning tree state

Command Mode

- /exec

show spanning-tree internal errors

show spanning-tree internal [ event-history ] errors

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show information about stp

internal

Show internal STP information

event-history

(Optional) Show various event logs of stp

errors

Show error logs of STP

Command Mode

- /exec

show spanning-tree internal event-history

show spanning-tree internal event-history { { tree <tree-id> [ all-ports | interface <interface-id> ] } | deleted | all } [ brief ]

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show information about stp

internal

Show internal STP information

event-history

Show various event logs of stp

tree

Show spanning tree instance info

tree-id

Enter tree id

all-ports

(Optional) Show information for all ports of the tree

interface

(Optional) Spanning Tree interface status and configuration

interface-id

(Optional)

deleted

Show event history of deleted trees and ports

all

Show all event historys

brief

(Optional) Show brief format

Command Mode

- /exec

show spanning-tree internal event-history stp-lite

show spanning-tree internal event-history stp-lite

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show information about stp

internal

Show internal STP information

event-history

Show various event logs of stp

stp-lite

Show STP-lite related event logs

Command Mode

- /exec

show spanning-tree internal event-history vpc pes

show spanning-tree internal event-history vpc pes

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show information about stp

internal

Show internal STP information

event-history

Show various event logs of stp

vpc

Show virtual Port-channel event logs

pes

Show virtual Port-channel PES event logs

Command Mode

- /exec

show spanning-tree internal event-history vpc sps

show spanning-tree internal event-history vpc sps

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show information about stp

internal

Show internal STP information

event-history

Show various event logs of stp

vpc

Show virtual Port-channel event logs

sps

Show virtual Port-channel SPS event logs

Command Mode

- /exec

show spanning-tree internal flc-info

show spanning-tree internal flc-info [ vlan <vlan-id> | bridge-domain <bd-id> ]

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

internal

Show internal STP information

flc-info

Show forwarding LC Info

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

Command Mode

- /exec

show spanning-tree internal info all

show spanning-tree internal info all

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

internal

Show internal STP information

info

Show internal data structure information

all

Show all information

Command Mode

- /exec

show spanning-tree internal info flush qstats

show spanning-tree internal info flush qstats

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

internal

Show internal STP information

info

Show internal data structure information

flush

MAC Address Flush

qstats

MAC Address Flush queue stats

Command Mode

- /exec

show spanning-tree internal info flush stats

show spanning-tree internal info flush stats

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

internal

Show internal STP information

info

Show internal data structure information

flush

MAC Address Flush

stats

MAC Address Flush stats

Command Mode

- /exec

show spanning-tree internal info global

show spanning-tree internal info global

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

internal

Show internal STP information

info

Show internal data structure information

global

Show global information

Command Mode

- /exec

show spanning-tree internal info issu

show spanning-tree internal info issu

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

internal

Show internal STP information

info

Show internal data structure information

issu

Show information related to ISSU

Command Mode

- /exec

show spanning-tree internal info l2gstp

show spanning-tree internal info l2gstp [ vlan <vlan-id> ]

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

internal

Show internal STP information

info

Show internal data structure information

l2gstp

L2 Gateway STP

vlan

(Optional) Show spanning tree instance info

vlan-id

(Optional) Enter tree id

Command Mode

- /exec

show spanning-tree internal info l2gstp peer-info

show spanning-tree internal info l2gstp peer-info [ pss ]

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

internal

Show internal STP information

info

Show internal data structure information

l2gstp

L2 Gateway STP

peer-info

L2 Gateway Peer Information

pss

(Optional) L2 Gateway Peer Information PSS

Command Mode

- /exec

show spanning-tree internal info l2gstp sdb

show spanning-tree internal info l2gstp sdb

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

internal

Show internal STP information

info

Show internal data structure information

l2gstp

L2 Gateway STP

sdb

L2 Gaeway STP SDB

Command Mode

- /exec

show spanning-tree internal info sps-pending

show spanning-tree internal info sps-pending

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

internal

Show internal STP information

info

Show internal data structure information

sps-pending

Show pending set port states

Command Mode

- /exec

show spanning-tree internal info sps-q-stats

show spanning-tree internal info sps-q-stats

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

internal

Show internal STP information

info

Show internal data structure information

sps-q-stats

Set port state queue stats

Command Mode

- /exec

show spanning-tree internal info stp-lite stats

show spanning-tree internal info stp-lite [ tree <tree-id> ] stats

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show information about stp

internal

Show internal STP information

info

Show internal data structure information

stp-lite

Show STP-lite related info

tree

(Optional) Show spanning tree instance info

tree-id

(Optional) Enter tree id

stats

Show STP-lite stats counters

Command Mode

- /exec

show spanning-tree internal info tree

show spanning-tree internal info tree <tree-id> [ all-ports | interface <interface-id> ]

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

internal

Show internal STP information

info

Show internal data structure information

tree

Show spanning tree instance info

tree-id

Enter tree id

all-ports

(Optional) Show information for all ports of the tree

interface

(Optional) Spanning Tree interface status and configuration

interface-id

(Optional)

Command Mode

- /exec

show spanning-tree internal info vpc

show spanning-tree internal info vpc

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

internal

Show internal STP information

info

Show internal data structure information

vpc

Show Virtual Port-channel (vPC) information and stats

Command Mode

- /exec

show spanning-tree internal interactions

show spanning-tree internal interactions

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show information about stp

internal

Show internal STP information

interactions

Show interactions with other components

Command Mode

- /exec

show spanning-tree internal mem-stats

show spanning-tree internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show information about stp

internal

Show internal STP information

mem-stats

Show memory allocation statistics of STP

detail

(Optional) Show detail memstats for stp

Command Mode

- /exec

show spanning-tree internal msgs

show spanning-tree internal [ event-history ] msgs

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show information about stp

internal

Show internal STP information

event-history

(Optional) Show various event logs of stp

msgs

Show various message logs of STP

Command Mode

- /exec

show spanning-tree issu-impact

show spanning-tree issu-impact

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

issu-impact

Show whether STP meets ISSU criteria

Command Mode

- /exec

show spanning-tree mst

show spanning-tree mst [ <mst-id> ] [ __readonly__ TABLE_tree <tree_id> <tree_tree_type> <tree_protocol> <port_count> <bridge_mac> <bridge_priority> <tree_designated_root> <tree_designated_root_priority> <stp_active> <root_path_cost> <root_port_if_index> <root_port_priority> <root_port_number> <topology_change> <topology_change_detected> <topology_change_count> <topology_change_time_since_last> <tc_initiator_if_index> <bridge_forward_delay> <bridge_max_age> <bridge_hello_time> <max_age> <hello_time> <forward_delay> <hold_time> <hello_timer> <topology_change_timer> <tcn_timer> <aging_timer> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> <ist-master-id-mac> <ist-master-prio> <ist-path-cost> <remaining-hops> <max-hops> <txholdcount> <tree-vlan-map> TABLE_port <if_index> <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> [ <oper_networkport> ] <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> <pvstsim_inc_timer> <boundary> <simulate_pvst> <prestd> [ <designated_ist_master> ] [ <designated_ist_master_priority> ] [ <designated_ist_cost> ] [ <vlan-map> ] ]

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

mst

Multiple spanning trees

mst-id

(Optional) MST instance range, example: 0-3,5,7-9

__readonly__

(Optional) Read Only

TABLE_tree

(Optional)

tree_id

(Optional) Tree Id

tree_tree_type

(Optional) Tree Type

tree_protocol

(Optional) Tree Protocol

port_count

(Optional) Number of Ports in Tree

bridge_mac

(Optional) Bridge Mac

bridge_priority

(Optional) Bridge Priority

tree_designated_root

(Optional) Designated Root Mac

tree_designated_root_priority

(Optional) Designated Root Priority

stp_active

(Optional) Spanning Tree State

root_path_cost

(Optional) Root Path Cost

root_port_if_index

(Optional) Root Port

root_port_priority

(Optional) Root Port Priority

root_port_number

(Optional) Root Port Number

topology_change

(Optional) Topology Change flag is set ?

topology_change_detected

(Optional) Topology Change detected flag is set ?

topology_change_count

(Optional) Topology Change Count

topology_change_time_since_last

(Optional) Time since last TC

tc_initiator_if_index

(Optional) Topology Change initiator port

max_age

(Optional) Max Age

hello_time

(Optional) Hello Time

forward_delay

(Optional) Forward delay

bridge_max_age

(Optional) Configured Bridge Max Age

bridge_hello_time

(Optional) Configured Hello Time

bridge_forward_delay

(Optional) Configured Forward Delay

hold_time

(Optional) Configured Hold Time

hello_timer

(Optional) Hello Timer Value

topology_change_timer

(Optional) Topology Change Timer Value

tcn_timer

(Optional) TCN Timer Value

aging_timer

(Optional) Ageing Timer Value

disabled

(Optional) Number of ports Disabled

blocking

(Optional) Number of ports Blocking

listening

(Optional) Number of ports Listening

learning

(Optional) Number of ports Learning

forwarding

(Optional) Number of ports Forwarding

invalid

(Optional) Number of ports Invalid

ist-master-id-mac

(Optional) IST Master ID MAC address

ist-master-prio

(Optional) IST Master ID priority

ist-path-cost

(Optional) IST path cost

remaining-hops

(Optional) Remaining hops

max-hops

(Optional) Max Hops

txholdcount

(Optional) TX Hold count

tree-vlan-map

(Optional) Bitmap of vlans mapped to tree

TABLE_port

(Optional)

if_index

(Optional) Interface

state

(Optional) STP Port State

role

(Optional) STP Port Role

port_priority

(Optional) Port priority

port_number

(Optional) Port Number

port_info_tree_id

(Optional) Tree Id

port_tree_type

(Optional) Tree Type

port_protocol

(Optional) Tree Protocol

path_cost

(Optional) Cost configured on this port

port_designated_root

(Optional) Designated Root Mac

port_designated_root_priority

(Optional) Designated Root Priority

designated_cost

(Optional) Designated cost

designated_bridge

(Optional) Designated bridge mac

designated_bridge_priority

(Optional) Designated bridge priority

designated_port

(Optional) Designated Port Id

tc_acknowledge

(Optional) Is topology change acknowledge flag set ?

forward_transition_count

(Optional) Port transitions to Forwarding

self_looped

(Optional) Is Port self looped ?

inconsistency

(Optional) PVST+ Inconsistency Error Flags

bpdus_in

(Optional) BPDUs received on this stp port

bpdus_out

(Optional) BPDUs send on this stp port

port_fast

(Optional) Port Fast configured on port

link_type

(Optional) Link type configured on this port

port_guard

(Optional) Port Guard mode of port

bpdu_guard

(Optional) Bpdu Guard mode configured

bpdu_filter

(Optional) Bpdu Filter mode configured

oper_portfast

(Optional) Is portfast enabled ?

oper_p2p

(Optional) Is port P2P ?

oper_loopguard

(Optional) Is loopguard enabled ?

oper_bpduguard

(Optional) Is bpduguard enabled ?

oper_bpdufilter

(Optional) Is bpdufilter enabled ?

int_bpdufilter

(Optional) Is internal bpdufilter enabled ?

forward_delay_timer

(Optional) Forward Delay timer

hold_timer

(Optional) Hold Timer

message_age

(Optional) Message age timer

peer

(Optional) STP protocol of the peer

boundary

(Optional) Is port boundary ?

simulate_pvst

(Optional) Is port is pvst simulate mode ?

dispute

(Optional) Is port Disputed ?

pvstsim_inc_timer

(Optional) PVST Simulation Inconsistency Hold Timer

prestd

(Optional) Is port Pre STD MST ?

designated_ist_master

(Optional) Ist master mac

designated_ist_master_priority

(Optional) Ist master priority

designated_ist_cost

(Optional) Ist master path cost

vlan-map

(Optional) Bitmap of vlans mapped to port

oper_networkport

(Optional) Is network port enabled ?

Command Mode

- /exec

show spanning-tree mst configuration

{ show spanning-tree mst configuration [ __readonly__ <stp-mode> <name> <rev-id> { Instance_to_vlan_map <mst_id> <vlan_bit_map> } [ <pvlan-sync> ] ] }

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

mst

Multiple spanning trees

configuration

MST current region configuration

__readonly__

(Optional) Read Only

stp-mode

(Optional) Spanning Tree operating mode

name

(Optional) Configuration name

rev-id

(Optional) Configuration revision number

Instance_to_vlan_map

(Optional) Instance to vlan mapping Info

mst_id

(Optional) MST Instance ID

vlan_bit_map

(Optional) VLAN Bitmap

pvlan-sync

(Optional) pvlan synchronization

Command Mode

- /exec

show spanning-tree mst configuration digest

{ show spanning-tree mst configuration digest [ __readonly__ <stp-mode> <name> <rev-id> <digest> <prestd-digest> [ <pvlan-sync> ] ] }

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

mst

Multiple spanning trees

configuration

MST current region configuration

digest

Display MST configuration digest

__readonly__

(Optional) Read Only

stp-mode

(Optional) Spanning Tree operating mode

name

(Optional) Configuration name

rev-id

(Optional) Configuration revision number

digest

(Optional) MST region configuration digest

prestd-digest

(Optional) MST region configuration pre-std digest

pvlan-sync

(Optional) pvlan synchronization

Command Mode

- /exec

show spanning-tree mst detail

show spanning-tree mst [ <mst-id> ] detail

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

mst

Multiple spanning trees

mst-id

(Optional) MST instance range, example: 0-3,5,7-9

detail

Detailed information

Command Mode

- /exec

show spanning-tree mst interface

show spanning-tree mst [ <mst-id> ] interface <interface-id> [ __readonly__ TABLE_port <if_index> <port_info_tree_id> <state> <role> <port_priority> <port_number> <port_protocol> <port_tree_type> <path_cost> <port_designated_root> <port_designated_root_priority> <designated_cost> <designated_bridge> <designated_bridge_priority> <designated_port> <tc_acknowledge> <forward_transition_count> <self_looped> <inconsistency> <bpdus_in> <bpdus_out> <port_fast> <link_type> <port_guard> <bpdu_guard> <bpdu_filter> <oper_portfast> <oper_p2p> <oper_loopguard> <oper_bpduguard> <oper_bpdufilter> <int_bpdufilter> <forward_delay_timer> <hold_timer> <message_age> <peer> <dispute> <prestd> <boundary> <simulate_pvst> [ <designated_ist_master> ] [ <designated_ist_master_priority> ] [ <designated_ist_cost> ] [ <vlan-map> ] [ <oper_networkport> ] [ <pvstsim_inc_timer> ] ]

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

mst

Multiple spanning trees

mst-id

(Optional) MST instance range, example: 0-3,5,7-9

interface

Spanning Tree interface status and configuration

interface-id

Specify an interface as a target for the command

__readonly__

(Optional) Read Only

TABLE_port

(Optional)

if_index

(Optional) Interface

port_info_tree_id

(Optional) Tree Id

state

(Optional) STP Port State

role

(Optional) STP Port Role

port_priority

(Optional) Port priority

port_number

(Optional) Port Number

port_tree_type

(Optional) Tree Type

port_protocol

(Optional) Tree Protocol

path_cost

(Optional) Cost configured on this port

port_designated_root

(Optional) Designated Root Mac

port_designated_root_priority

(Optional) Designated Root Priority

designated_cost

(Optional) Designated cost

designated_bridge

(Optional) Designated bridge mac

designated_bridge_priority

(Optional) Designated bridge priority

designated_port

(Optional) Designated Port Id

tc_acknowledge

(Optional) Is topology change acknowledge flag set ?

forward_transition_count

(Optional) Port transitions to Forwarding

self_looped

(Optional) Is Port self looped ?

inconsistency

(Optional) PVST+ Inconsistency Error Flags

bpdus_in

(Optional) BPDUs received on this stp port

bpdus_out

(Optional) BPDUs send on this stp port

port_fast

(Optional) Port Fast configured on port

link_type

(Optional) Link type configured on this port

port_guard

(Optional) Port Guard mode of port

bpdu_guard

(Optional) Bpdu Guard mode configured

bpdu_filter

(Optional) Bpdu Filter mode configured

oper_portfast

(Optional) Is portfast enabled ?

oper_p2p

(Optional) Is port P2P ?

oper_loopguard

(Optional) Is loopguard enabled ?

oper_bpduguard

(Optional) Is bpduguard enabled ?

oper_bpdufilter

(Optional) Is bpdufilter enabled ?

int_bpdufilter

(Optional) Is internal bpdufilter enabled ?

forward_delay_timer

(Optional) Forward Delay timer

hold_timer

(Optional) Hold Timer

message_age

(Optional) Message age timer

peer

(Optional) STP protocol of the peer

boundary

(Optional) Is port boundary ?

simulate_pvst

(Optional) Is port is pvst simulate mode ?

dispute

(Optional) Is port Disputed ?

prestd

(Optional) Is port Pre STD MST ?

designated_ist_master

(Optional) Ist master mac

designated_ist_master_priority

(Optional) Ist master priority

designated_ist_cost

(Optional) Ist master path cost

vlan-map

(Optional) Bitmap of vlans mapped to port

oper_networkport

(Optional) Is network port enabled ?

pvstsim_inc_timer

(Optional) PVST Simulation Inconsistency Hold Timer

Command Mode

- /exec

show spanning-tree mst interface detail

show spanning-tree mst [ <mst-id> ] interface <interface-id> detail

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

mst

Multiple spanning trees

mst-id

(Optional) MST instance range, example: 0-3,5,7-9

detail

Detailed information

interface

Spanning Tree interface status and configuration

interface-id

Specify an interface as a target for the command

Command Mode

- /exec

show spanning-tree pathcost method

{ show spanning-tree pathcost method }

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

pathcost

Show Spanning pathcost options

method

Default pathcost calculation method

Command Mode

- /exec

show spanning-tree root

{ show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] root [ priority [ system-id ] ] } | { show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] root [ { address | cost | forward-time | hello-time | id | max-age | port } ] } | { show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] root [ { detail | brief } ] }

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

root

Status and configuration of the root bridge

address

(Optional) Mac address of this bridge

cost

(Optional) Path cost from this bridge to the root

forward-time

(Optional) Forward delay interval

hello-time

(Optional) Hello time

id

(Optional) Spanning tree bridge identifier

max-age

(Optional) Max age

port

(Optional) Root port

brief

(Optional) Brief summary of interface information

detail

(Optional) Detailed information

priority

(Optional) Bridge priority of this bridge

system-id

(Optional) Spanning tree priority with system id extension

Command Mode

- /exec

show spanning-tree summary

show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] summary [ __readonly__ <stp-mode> <stp_tree_root_info> <tree_type> <bridge_mac> <bridge_priority> <tree_designated_root> <tree_designated_root_priority> <stp_root_bmp_info> <stp_root_tree_type> <tree_root_bmp> <stp_l2gstp_bmp_info> <stp_l2gstp_tree_type> <stp_l2gstp_bmp> <stp_global_info> <pcost_method> <oper_pcost_method> <port_fast> <bpdu_guard> <bpdu_filter> <oper_loopguard> <bridge_assurance> <networkport_default> <simulate_pvst> <max-hops> <peer_switch_cfg> <oper_peer_switch> <stp_l2gstp_domain_id> <stp_lite> { TABLE_tree <stp_tree_summary> <summary_tree_type> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> <port_count> } <stp_summary_totals> <total_tree_type> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> <port_count> ]

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

vlan

(Optional) VLAN Switch Spanning Trees

bridge-domain

(Optional) Bridge-Domain Switch Spanning Trees

vlan-id

(Optional) vlan range, Example: 1,3-5,7,9-11

bd-id

(Optional) Bridge-Domain range, Example: 2,4-5,7,9-11

summary

Summary of port states

__readonly__

(Optional) Read Only

stp-mode

(Optional) Spanning Tree operating mode

stp_tree_root_info

(Optional) STP Tree Root info marker

tree_type

(Optional) Tree Type

bridge_mac

(Optional) Bridge Mac

bridge_priority

(Optional) Bridge Priority

tree_designated_root

(Optional) Designated Root Mac

tree_designated_root_priority

(Optional) Designated Root Priority

stp_root_bmp_info

(Optional) STP root bitmap info marker

stp_root_tree_type

(Optional) Tree Type

tree_root_bmp

(Optional) STP tree root bmp

stp_l2gstp_bmp_info

(Optional) L2 Gateway STP bitmap marker

stp_l2gstp_tree_type

(Optional) Tree Type

stp_l2gstp_bmp

(Optional) L2 Gateway STP bitmap

stp_global_info

(Optional) STP global info marker

pcost_method

(Optional) STP pathcost method

oper_pcost_method

(Optional) STP oper pathcost method

port_fast

(Optional) Port Fast configured on port

bpdu_guard

(Optional) Bpdu Guard mode configured

bpdu_filter

(Optional) Bpdu Filter mode configured

oper_loopguard

(Optional) Is loopguard enabled ?

bridge_assurance

(Optional) Bridge Assurance

networkport_default

(Optional) Network Port default

simulate_pvst

(Optional) Is port is pvst simulate mode ?

max-hops

(Optional) Max Hops

peer_switch_cfg

(Optional) peer switch configuration status

oper_peer_switch

(Optional) peer switch operational status

stp_l2gstp_domain_id

(Optional) L2 Gateway STP Domain ID

stp_lite

(Optional) STP-Lite

TABLE_tree

(Optional)

stp_tree_summary

(Optional) STP Tree Summary

summary_tree_type

(Optional) Tree Type

disabled

(Optional) Number of ports Disabled

blocking

(Optional) Number of ports Blocking

listening

(Optional) Number of ports Listening

learning

(Optional) Number of ports Learning

forwarding

(Optional) Number of ports Forwarding

invalid

(Optional) Number of ports Invalid

port_count

(Optional) Number of Ports in Tree

stp_summary_totals

(Optional) Total num STP trees

total_tree_type

(Optional) Tree Type

disabled

(Optional) Number of ports Disabled

blocking

(Optional) Number of ports Blocking

listening

(Optional) Number of ports Listening

learning

(Optional) Number of ports Learning

forwarding

(Optional) Number of ports Forwarding

invalid

(Optional) Number of ports Invalid

port_count

(Optional) Number of Ports in Tree

Command Mode

- /exec

show spanning-tree summary totals

show spanning-tree summary totals [ __readonly__ <stp-mode> <stp_tree_root_info> <tree_type> <bridge_mac> <bridge_priority> <tree_designated_root> <tree_designated_root_priority> <stp_root_bmp_info> <stp_root_tree_type> <tree_root_bmp> <stp_l2gstp_bmp_info> <stp_l2gstp_tree_type> <stp_l2gstp_bmp> <stp_global_info> <pcost_method> <oper_pcost_method> <port_fast> <bpdu_guard> <bpdu_filter> <oper_loopguard> <bridge_assurance> <networkport_default> <simulate_pvst> <max-hops> <peer_switch_cfg> <oper_peer_switch> <stp_l2gstp_domain_id> <stp_lite> <stp_summary_totals> <total_tree_type> <disabled> <blocking> <listening> <learning> <forwarding> <invalid> <port_count> ]

Syntax Description

Syntax Description

show

Show running system information

spanning-tree

Show spanning tree information

summary

Summary of port states

totals

Only show totals

__readonly__

(Optional) Read Only

stp-mode

(Optional) Spanning Tree operating mode

stp_tree_root_info

(Optional) STP Tree Root info marker

tree_type

(Optional) Tree Type

bridge_mac

(Optional) Bridge Mac

bridge_priority

(Optional) Bridge Priority

tree_designated_root

(Optional) Designated Root Mac

tree_designated_root_priority

(Optional) Designated Root Priority

stp_root_bmp_info

(Optional) STP root bitmap info marker

stp_root_tree_type

(Optional) Tree Type

tree_root_bmp

(Optional) STP tree root bmp

stp_l2gstp_bmp_info

(Optional) L2 Gateway STP bitmap marker

stp_l2gstp_tree_type

(Optional) Tree Type

stp_l2gstp_bmp

(Optional) L2 Gateway STP bitmap

stp_global_info

(Optional) STP global info marker

pcost_method

(Optional) STP pathcost method

oper_pcost_method

(Optional) STP oper pathcost method

port_fast

(Optional) Port Fast configured on port

bpdu_guard

(Optional) Bpdu Guard mode configured

bpdu_filter

(Optional) Bpdu Filter mode configured

oper_loopguard

(Optional) Is loopguard enabled ?

bridge_assurance

(Optional) Bridge Assurance

networkport_default

(Optional) Network Port default

simulate_pvst

(Optional) Is port is pvst simulate mode ?

max-hops

(Optional) Max Hops

peer_switch_cfg

(Optional) peer switch configuration status

oper_peer_switch

(Optional) peer switch operational status

stp_l2gstp_domain_id

(Optional) L2 Gateway STP Domain ID

stp_lite

(Optional) STP-Lite

stp_summary_totals

(Optional) Total num STP trees

total_tree_type

(Optional) Tree Type

disabled

(Optional) Number of ports Disabled

blocking

(Optional) Number of ports Blocking

listening

(Optional) Number of ports Listening

learning

(Optional) Number of ports Learning

forwarding

(Optional) Number of ports Forwarding

invalid

(Optional) Number of ports Invalid

port_count

(Optional) Number of Ports in Tree

Command Mode

- /exec

show sprom

show sprom { backplane <i0> | module <module> <i1> | xbar <santa-cruz-range> <i2> | powersupply <i3> | fan <i4> | sup | stby-sup | all | all2 | backplane2 | module2 <module2> | powersupply2 <i5> | sup2 } [ __readonly__ { cmn_block { <blk_sig_cb> <blk_ver_cb> <blk_length_cb> <blk_checksum_cb> <eeprom_size> <blk_count> <fru_major_type> <fru_minor_type> <oem_string> <prd_num> <serial_num> <part_num> <part_rev> <mfg_dev> <hw_rev> <mfg_bits> <eng_use> <snmp_oid> <power_consump> <rma_code> <clei_code> <vid> } } { sup_specific_block { <blk_sig_ssb> <blk_ver_ssb> <blk_length_ssb> <blk_checksum_ssb> <feature_bits> <hw_changes_bits> <card_index> <mac_addresses> <no_of_macs> <no_of_epld> { TABLE_epld <epld_name> <epld_ver> } <port_type_num> <max_connector_power> <cooling_reqt> <amb_temp> { TABLE_sensor_ssb <sensor_num_ssb> <maj_thres_ssb> <min_thres_ssb> } } } { lc_specific_block { <blk_sig_lc> <blk_ver_lc> <blk_length_lc> <blk_checksum_lc> <feature_bits> <hw_changes_bits> <card_index> <mac_addresses> <no_of_macs> <no_of_epld> { TABLE_epld <epld_name> <epld_ver> } <port_type_num> <max_connector_power> <cooling_reqt> <amb_temp> { TABLE_sensor_lc <sensor_num_lc> <maj_thres_lc> <min_thres_lc> } } } { ps_specific_block { <blk_sig_psb> <blk_ver_psb> <blk_length_psb> <blk_checksum_psb> <feature_bits> <current_110v> <current_220v> <stackmib_oid> } } { fan_specific_block { <blk_sig_fsb> <blk_ver_fsb> <blk_length_fsb> <blk_checksum_fsb> <feature_bits> <hw_change_bits> <stackmib_oid> <cooling_capacity> <amb_temp> } } { ch_specific_block { <blk_sig_csb> <blk_ver_csb> <blk_length_csb> <blk_checksum_csb> <feature_bits> <hw_changes_bits> <stackmib_oid> <mac_addresses> <no_of_macs> <oem_enterprise> <oem_mib_offset> <max_connector_power> } } { temp_sensor_block { <blk_sig_tsb> <blk_ver_tsb> <blk_length_tsb> <blk_checksum_tsb> <no_of_sensors> { TABLE_sensor_tsb <sensor_num_tsb> <maj_thres_tsb> <min_thres_tsb> } } } { wwn_specific_block { <blk_sig_wwnb> <blk_ver_wwnb> <blk_length_wwnb> <blk_checksum_wwnb> <wwn_usage_bits> } } { lic_specific_block { <blk_sig_licb> <blk_ver_licb> <blk_length_licb> <blk_checksum_licb> <lic_usage_bits> } } { second_serial_block { <blk_sig_sn2b> <blk_ver_sn2b> <blk_length_sn2b> <blk_checksum_sn2b> <serial_num_sn2b> } } { psu_common_block { <format_version> <internal_info_offset> <chassis_info_offset> <board_info_offset> <product_info_offset> <multirecord_info_offset> <checksum> } } { psu_board_info_block { <format_version> <length> <language_code> <mfg_date> <mfg_type> <mfg_info> <name_type> <product_name> <snum_type> <snum> <part_type> <partnum> <fruid_type> <fruid> <bom_hw_pid_info> <partnum_rev> <fab_revision> <vid> <clei_len> <clei> <eof_marker> <csum> } } { psu_product_info_block { <format_version> <length> <language_code> <mfg_type> <mfg_info> <name_type> <product_name> <part_type> <partnum> <product_ver_type> <sw_certification> <snum_type> <snum> <asset_type> <asset_string> <fruid_type> <fruid> <custom_pinfo> <partnumrev> <vid> <eof_marker> <csum> } } { psu_record_info_block { <record_type> <record_info> <record_len> <record_csum> <header_csum> <record_identifier> <format_ver> <standby_pwr_budget> <psu_class> <psu_watts> } } ]

Syntax Description

Syntax Description

show

Show running system information

sprom

show SPROM contents

backplane

show backplane clock module sprom contents

i0

please enter instance of backplane sprom

module

show linecard module sprom contents

module

please enter module number

i1

please enter instance of module sprom

xbar

show xbar fabric sprom contents

santa-cruz-range

please enter the xbar number

i2

please enter sprom instance number

powersupply

show powersupply sprom contents

i3

please enter powersupply number

fan

show fan module sprom contents

i4

please enter fan number

sup

show supervisor sprom contents

stby-sup

show standby supervisor sprom contents

all

show all sproms contents

all2

All sprom contents

backplane2

Backplane sprom contents

module2

Linecard sprom contents

module2

Linecard module number

powersupply2

Powersupply sprom contents

i5

Powersupply module number

sup2

Supervisor sprom contents

__readonly__

(Optional)

cmn_block

(Optional)

blk_sig_cb

(Optional)

blk_ver_cb

(Optional)

blk_length_cb

(Optional)

blk_checksum_cb

(Optional)

eeprom_size

(Optional)

blk_count

(Optional)

fru_major_type

(Optional)

fru_minor_type

(Optional)

oem_string

(Optional)

prd_num

(Optional)

serial_num

(Optional)

part_num

(Optional)

part_rev

(Optional)

mfg_dev

(Optional)

hw_rev

(Optional)

mfg_bits

(Optional)

eng_use

(Optional)

snmp_oid

(Optional)

power_consump

(Optional)

rma_code

(Optional)

clei_code

(Optional)

vid

(Optional)

ch_specific_block

(Optional)

blk_sig_csb

(Optional)

blk_ver_csb

(Optional)

blk_length_csb

(Optional)

blk_checksum_csb

(Optional)

feature_bits

(Optional)

hw_changes_bits

(Optional)

stackmib_oid

(Optional)

mac_addresses

(Optional)

no_of_macs

(Optional)

oem_enterprise

(Optional)

oem_mib_offset

(Optional)

max_connector_power

(Optional)

sup_specific_block

(Optional)

blk_sig_ssb

(Optional)

blk_ver_ssb

(Optional)

blk_length_ssb

(Optional)

blk_checksum_ssb

(Optional)

feature_bits

(Optional)

hw_changes_bits

(Optional)

card_index

(Optional)

mac_addresses

(Optional)

no_of_macs

(Optional)

no_of_epld

(Optional)

TABLE_epld

(Optional)

epld_name

(Optional)

epld_ver

(Optional)

port_type_num

(Optional)

max_connector_power

(Optional)

cooling_reqt

(Optional)

amb_temp

(Optional)

TABLE_sensor_ssb

(Optional)

sensor_num_ssb

(Optional)

maj_thres_ssb

(Optional)

min_thres_ssb

(Optional)

lc_specific_block

(Optional)

blk_sig_lc

(Optional)

blk_ver_lc

(Optional)

blk_length_lc

(Optional)

blk_checksum_lc

(Optional)

feature_bits

(Optional)

hw_changes_bits

(Optional)

card_index

(Optional)

mac_addresses

(Optional)

no_of_macs

(Optional)

no_of_epld

(Optional)

TABLE_epld

(Optional)

epld_name

(Optional)

epld_ver

(Optional)

port_type_num

(Optional)

max_connector_power

(Optional)

cooling_reqt

(Optional)

amb_temp

(Optional)

TABLE_sensor_lc

(Optional)

sensor_num_lc

(Optional)

maj_thres_lc

(Optional)

min_thres_lc

(Optional)

ps_specific_block

(Optional)

blk_sig_psb

(Optional)

blk_ver_psb

(Optional)

blk_length_psb

(Optional)

blk_checksum_psb

(Optional)

feature_bits

(Optional)

current_110v

(Optional)

current_220v

(Optional)

stackmib_oid

(Optional)

fan_specific_block

(Optional)

blk_sig_fsb

(Optional)

blk_ver_fsb

(Optional)

blk_length_fsb

(Optional)

blk_checksum_fsb

(Optional)

feature_bits

(Optional)

hw_change_bits

(Optional)

stackmib_oid

(Optional)

cooling_capacity

(Optional)

amb_temp

(Optional)

temp_sensor_block

(Optional)

blk_sig_tsb

(Optional)

blk_ver_tsb

(Optional)

blk_length_tsb

(Optional)

blk_checksum_tsb

(Optional)

no_of_sensors

(Optional)

TABLE_sensor_tsb

(Optional)

sensor_num_tsb

(Optional)

maj_thres_tsb

(Optional)

min_thres_tsb

(Optional)

wwn_specific_block

(Optional)

blk_sig_wwnb

(Optional)

blk_ver_wwnb

(Optional)

blk_length_wwnb

(Optional)

blk_checksum_wwnb

(Optional)

wwn_usage_bits

(Optional)

lic_specific_block

(Optional)

blk_sig_licb

(Optional)

blk_ver_licb

(Optional)

blk_length_licb

(Optional)

blk_checksum_licb

(Optional)

lic_usage_bits

(Optional)

second_serial_block

(Optional)

blk_sig_sn2b

(Optional)

blk_ver_sn2b

(Optional)

blk_length_sn2b

(Optional)

blk_checksum_sn2b

(Optional)

serial_num_sn2b

(Optional)

psu_common_block

(Optional)

format_version

(Optional)

internal_info_offset

(Optional)

chassis_info_offset

(Optional)

board_info_offset

(Optional)

product_info_offset

(Optional)

multirecord_info_offset

(Optional)

checksum

(Optional)

psu_board_info_block

(Optional)

format_version

(Optional)

length

(Optional)

language_code

(Optional)

mfg_date

(Optional)

mfg_type

(Optional)

mfg_info

(Optional)

name_type

(Optional)

product_name

(Optional)

snum_type

(Optional)

snum

(Optional)

part_type

(Optional)

partnum

(Optional)

fruid_type

(Optional)

fruid

(Optional)

bom_hw_pid_info

(Optional)

partnum_rev

(Optional)

fab_revision

(Optional)

vid

(Optional)

clei_len

(Optional)

clei

(Optional)

eof_marker

(Optional)

csum

(Optional)

psu_product_info_block

(Optional)

format_version

(Optional)

length

(Optional)

language_code

(Optional)

mfg_type

(Optional)

mfg_info

(Optional)

name_type

(Optional)

product_name

(Optional)

part_type

(Optional)

partnum

(Optional)

product_ver_type

(Optional)

sw_certification

(Optional)

snum_type

(Optional)

snum

(Optional)

asset_type

(Optional)

asset_string

(Optional)

fruid_type

(Optional)

fruid

(Optional)

custom_pinfo

(Optional)

partnumrev

(Optional)

vid

(Optional)

eof_marker

(Optional)

csum

(Optional)

psu_record_info_block

(Optional)

record_type

(Optional)

record_info

(Optional)

record_len

(Optional)

record_csum

(Optional)

header_csum

(Optional)

record_identifier

(Optional)

format_ver

(Optional)

standby_pwr_budget

(Optional)

psu_class

(Optional)

psu_watts

(Optional)

Command Mode

- /exec

show ssh key

show ssh key [ { dsa [ md5 ] | rsa [ md5 ] | [ md5 ] } ] [ __readonly__ { TABLE_sessions <key_type> <key_time> <key_data> <key_bitcount> <key_fingerprint> } ]

Syntax Description

Syntax Description

show

Show running system information

ssh

Show SSH information

key

Show ssh keys

dsa

(Optional) Show dsa ssh keys

rsa

(Optional) Show rsa ssh keys

md5

(Optional) Show Fingerprint in MD5 Format

__readonly__

(Optional)

TABLE_sessions

(Optional) ssh key

key_type

(Optional) keys type

key_time

(Optional) timestamp

key_data

(Optional) ssh key data

key_bitcount

(Optional) bitcount

key_fingerprint

(Optional) fingerprint

Command Mode

- /exec

show ssh server

show ssh server [ __readonly__ { operation_status <o_status> } ]

Syntax Description

Syntax Description

show

Show running system information

ssh

Show SSH information

server

Show whether ssh server is enabled or not

__readonly__

(Optional)

operation_status

(Optional) run-time information about ssh

o_status

(Optional) operational status of ssh server

Command Mode

- /exec

show startup-config

show startup-config

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

Command Mode

- /exec

show startup-config aaa

show startup-config aaa

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show startup system information

aaa

Display aaa configuration

Command Mode

- /exec

show startup-config aclmgr

show startup-config aclmgr [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Display the startup configuration

aclmgr

show startup config for aclmgr

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config adjmgr

show startup-config adjmgr [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

adjmgr

Display adjmgr information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config amt

show startup-config amt [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

amt

Display amt information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config arp

show startup-config arp [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

arp

Display arp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config bfd

show startup-config bfd [ all ]

Syntax Description

Syntax Description

show

Show system information

startup-config

Display the startup configuration

bfd

show startup config for bfd

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config bgp

show startup-config bgp [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

bgp

Display bgp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config bloggerd

show startup-config bloggerd [ all ]

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show system startup configuration information

bloggerd

Display bloggerd configuration

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config callhome

show startup-config callhome

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show startup system information

callhome

Display callhome configuration

Command Mode

- /exec

show startup-config catena

show startup-config catena

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show startup system information

catena

catena instances

Command Mode

- /exec

show startup-config cdp

show startup-config cdp [ all ]

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show system startup configuration information

cdp

Display cdp configuration

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config cert-enroll

show startup-config cert-enroll

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show startup system information

cert-enroll

Display certificates configuration

Command Mode

- /exec

show startup-config cfs

show startup-config cfs [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

cfs

Display cfs configurations

all

(Optional) show running config with defaults

Command Mode

- /exec

show startup-config config-profile

show startup-config config-profile [ <all_conf_profile_name> ]

Syntax Description

Syntax Description

show

Show startup-config

startup-config

Current startup configuration

config-profile

Display port-profile configuration

all_conf_profile_name

(Optional) Enter the name of the profile

Command Mode

- /exec

show startup-config copp

show startup-config copp [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

System startup-config commands

copp

Control-Plane Policing

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config diagnostic

show startup-config diagnostic [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Contents of startup configuration

diagnostic

Diagnostic configuration

all

(Optional) Display running config with defaults

Command Mode

- /exec

show startup-config dot1x

show startup-config dot1x

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show startup system information

dot1x

Display dot1x configuration

Command Mode

- /exec

show startup-config ecp

show startup-config ecp [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

ecp

ECP (Edge Control Protocol)

all

(Optional) Display startup config with defaults

Command Mode

- /exec

show startup-config eem

show startup-config eem

Syntax Description

Syntax Description

show

Show running system information

startup-config

Show the system startup configuration

eem

Show the event manager startup configuration

Command Mode

- /exec

show startup-config eigrp

show startup-config eigrp [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

eigrp

Display eigrp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config eltm

show startup-config eltm

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

eltm

Display eltm configurations

Command Mode

- /exec

show startup-config evb

show startup-config evb [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

evb

EVB (Edge Virtual Bridge)

all

(Optional) Display startup config with defaults

Command Mode

- /exec

show startup-config exclude

show startup-config exclude <feature-list> +

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

exclude

Exclude startup configuration of specified features

feature-list

Exclude features

Command Mode

- /exec

show startup-config expand-port-profile

show startup-config expand-port-profile

Syntax Description

Syntax Description

show

Show running system information

startup-config

System startup-config commands

expand-port-profile

Expand port profile

Command Mode

- /exec

show startup-config fabric forwarding

show startup-config fabric forwarding [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config icam

show startup-config icam

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show startup system information

icam

icam services

Command Mode

- /exec

show startup-config icmpv6

show startup-config icmpv6 [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

icmpv6

Display icmpv6 information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config igmp

show startup-config igmp [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

igmp

Display igmp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config imp

show startup-config imp [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

imp

Display imp information

all

(Optional) Display start config with defaults clis

Command Mode

- /exec

show startup-config interface

show startup-config interface [ <if0> ] [ expand-port-profile ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

interface

Interface configuration

if0

(Optional) interface type and number in module/slot format

expand-port-profile

(Optional) Expand port profile

Command Mode

- /exec

show startup-config interface

show startup-config interface <if0> [ membership ] [ expand-port-profile ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

interface

Interface configuration

if0

interface type and number in module/slot format

membership

(Optional) Show membership information

expand-port-profile

(Optional) Expand port profile

Command Mode

- /exec

show startup-config ip

show startup-config ip [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

ip

Display ip information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config ipqos

show startup-config ipqos [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Display the startup configuration

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config ipv6

show startup-config ipv6 [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

ipv6

Display ipv6 information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config isis

show startup-config isis [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

isis

Display isis information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config l3vm

show startup-config l3vm [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

l3vm

Display l3vm information

all

(Optional) Display running config with defaults

Command Mode

- /exec

show startup-config ldap

show startup-config ldap

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show startup system information

ldap

Display ldap configuration

Command Mode

- /exec

show startup-config license

show startup-config license [ all ]

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show startup system information

license

Display licensing configuration

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config lisp

show startup-config lisp [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

lisp

Display lisp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config lldp

show startup-config lldp [ all ]

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show system startup configuration information

lldp

Display lldp configuration

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config log

show startup-config { log | mdp-log } [ bootstrap ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

mdp-log

Displays execution log of last used mdp ascii startup configuration

log

Displays execution log of last used ascii startup configuration

bootstrap

(Optional) Bootstrap config replay execution log

Command Mode

- /exec

show startup-config macsec

show startup-config macsec

Syntax Description

Syntax Description

show

Show running system information

startup-config

show startup system information

macsec

Show CTS information

Command Mode

- /exec

show startup-config mmode

show startup-config mmode [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Show startup configuration

mmode

Display maintenance mode startup configuration

all

(Optional) Show startup config with defaults

Command Mode

- /exec

show startup-config monitor

show startup-config monitor

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

monitor

Configure Ethernet SPAN sessions

Command Mode

- /exec

show startup-config mpls ldp

show startup-config mpls ldp [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current operating configuration

mpls

Display MPLS status and configuration

ldp

Label Distribution Protocol

all

(Optional) Display running-config with defaults

Command Mode

- /exec

show startup-config mpls static

show startup-config mpls static [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current operating configuration

mpls

Display MPLS status and configuration

static

Static Label Bindings

all

(Optional) Display running-config with defaults

Command Mode

- /exec

show startup-config mpls strip

show startup-config mpls strip [ all ]

Syntax Description

Syntax Description

show

Show running system information

mpls

Configure MPLS settings

strip

Stripping of MPLS headers

startup-config

System startup configuration

all

(Optional) Show startup configuration for STRIPCL with defaults

Command Mode

- /exec

show startup-config mpls traffic-eng

show startup-config mpls traffic-eng [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

mpls

show startup config for mpls features

traffic-eng

show startup-config for Traffic Engineering

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config msdp

show startup-config msdp [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

msdp

Display msdp information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config nat

show startup-config nat [ all ]

Syntax Description

Syntax Description

show

Show system information

startup-config

Display the startup configuration

nat

show startup config for nat

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config nbm

show startup-config nbm

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

nbm

show running config for Non Blocking Multicast

Command Mode

- /exec

show startup-config ngoam

show startup-config ngoam

Syntax Description

Syntax Description

show

Show running system information

startup-config

Show startup system information

ngoam

ngoam configuration

Command Mode

- /exec

show startup-config ntp

show startup-config ntp [ all ]

Syntax Description

Syntax Description

show

Show information

startup-config

Show startup system configuration

ntp

Show NTP information

all

(Optional) Show all NTP startup configuration

Command Mode

- /exec

show startup-config nxsdk

show startup-config nxsdk [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Display the startup configuration

nxsdk

NXOS SDK

all

(Optional) Display running config with defaults

Command Mode

- /exec

show startup-config openflow

show startup-config openflow [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

openflow

Show startup config for OpenFlow

all

(Optional) Show startup config with defaults

Command Mode

- /exec

show startup-config ospf

show startup-config ospf [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

ospf

Display ospf information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config ospfv3

show startup-config ospfv3 [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

ospfv3

Display ospfv3 information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config otv-isis

show startup-config otv-isis [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

otv-isis

Display otv-isis information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config otv

show startup-config otv [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

otv

Display otv information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config param-list

show startup-config param-list [ <plistname> ]

Syntax Description

Syntax Description

show

Show startup-cfg

startup-config

show startup configuration

param-list

Display param-list configuration

plistname

(Optional) Enter the name of the param list

Command Mode

- /exec

show startup-config pim

show startup-config pim [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

pim

Display pim information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config pim6

show startup-config pim6 [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

pim6

Display pim6 information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config plb-services

show startup-config plb-services

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show startup system information

plb-services

PLB services

Command Mode

- /exec

show startup-config port-profile

show startup-config port-profile [ <all_profile_name> ]

Syntax Description

Syntax Description

show

Show startup-config

startup-config

Current startup configuration

port-profile

Display port-profile configuration

all_profile_name

(Optional) Enter the name of the profile

Command Mode

- /exec

show startup-config port-security

show startup-config port-security [ all ]

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show startup system information

port-security

Display port-security configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show startup-config ptp

show startup-config ptp [ all ]

Syntax Description

Syntax Description

startup-config

Current startup configuration

ptp

show startup config for ptp

all

(Optional) show running config with defaults

Command Mode

- /exec

show startup-config radius

show startup-config radius

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show startup system information

radius

Display radius configuration

Command Mode

- /exec

show startup-config rip

show startup-config rip [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

rip

Display rip information

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config rpm

show startup-config rpm [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

rpm

Display Route Policy Manager (RPM) information

all

(Optional) Display startup config with defaults

Command Mode

- /exec

show startup-config rsvp

show startup-config rsvp

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

rsvp

Display RSVP status

Command Mode

- /exec

show startup-config security

show startup-config security

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show startup system information

security

Display security configuration

Command Mode

- /exec

show startup-config services

show startup-config services

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show startup system information

services

services

Command Mode

- /exec

show startup-config sflow

show startup-config sflow [ all ]

Syntax Description

Syntax Description

startup-config

Current startup configuration

sflow

show startup config for sflow

all

(Optional) show running config with defaults

Command Mode

- /exec

show startup-config smart-channel

show startup-config smart-channel

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show startup system information

smart-channel

smart-channel services

Command Mode

- /exec

show startup-config snmp

show startup-config snmp [ all ]

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show startup system information

snmp

Display snmp configuration

all

(Optional) show running config with defaults

Command Mode

- /exec

show startup-config switch

show startup-config { switch-profile | include-switch-profile }

Syntax Description

Syntax Description

show

Show running system information

startup-config

System startup configuration

switch-profile

Show switch-profile information

include-switch-profile

Show startup and switch-profile configuration

Command Mode

- /exec

show startup-config tacacs

show startup-config tacacs +

Syntax Description

Syntax Description

show

show startup-cfg

startup-config

show startup system information

Command Mode

- /exec

show startup-config track

show startup-config track

Syntax Description

Syntax Description

show

Show running system information

startup-config

Show the system startup configuration

track

Show the track startup configuration

Command Mode

- /exec

show startup-config udld

show startup-config udld

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

udld

Show udld configuration

Command Mode

- /exec

show startup-config vdc-all

show startup-config vdc-all

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

vdc-all

Display config from all VDC

Command Mode

- /exec

show startup-config vdc

show startup-config vdc [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current saved configuration

vdc

Show Virtual Device Contexts

all

(Optional) show startup config with defaults

Command Mode

- /exec

show startup-config virtual-service

show startup-config virtual-service

Syntax Description

Syntax Description

show

Show running system information

startup-config

System startup-config commands

virtual-service

Show startup config for virtualization services

Command Mode

- /exec

show startup-config vlan

show startup-config vlan <vlan-id>

Syntax Description

Syntax Description

show

Show running system information

startup-config

System startup-config commands

vlan

Vlan commands

vlan-id

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

Command Mode

- /exec

show startup-config vlan

show startup-config vlan

Syntax Description

Syntax Description

show

Show running system information

startup-config

System startup-config commands

vlan

Vlan commands

Command Mode

- /exec

show startup-config vpc

show startup-config vpc [ all ]

Syntax Description

Syntax Description

startup-config

Current startup configuration

vpc

show startup config for vPC

all

(Optional) show running config with defaults

Command Mode

- /exec

show startup-config vrf

show startup-config vrf <vrf-cfg-name> [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

vrf

Display VRF information

vrf-cfg-name

Configurable VRF name

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config vrf default

show startup-config vrf default [ all ]

Syntax Description

Syntax Description

show

Show running system information

startup-config

Current startup configuration

vrf

Display VRF information

default

Known VRF name

all

(Optional) Display running config with defaults clis

Command Mode

- /exec

show startup-config vshd

show startup-config vshd

Syntax Description

Syntax Description

show

Show startup system information

startup-config

Current startup configuration

vshd

Show startup config for vshd

Command Mode

- /exec

show summary

show { ip mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] all | ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ ipv4 [ { unicast | multicast } ] ] } summary [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Syntax Description

Syntax Description

show

Show running system information

ip

Display IP information

bgp

Display BGP status and configuration

mbgp

Display MBGP status and configuration

vrf

(Optional) Virtual Router Context

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

summary

Display summarized information of BGP state

ipv4

(Optional) Display BGP information for IPv4 address family

unicast

(Optional) Display BGP information for unicast address family

multicast

(Optional) Display BGP information for multicast address family

all

Display BGP information for all address families

Command Mode

- /exec

show switch-profile

show switch-profile [ __readonly__ <profile_name> <cfg_rev> ]

Syntax Description

Syntax Description

show

Show running system information

switch-profile

Show switch-profiles

__readonly__

(Optional)

profile_name

(Optional)

cfg_rev

(Optional)

Command Mode

- /exec

show switch-profile

show switch-profile [ <profile-name> ] { session-history | status commit } [ __readonly__ <prof-name> TABLE_session <session_index> <start_usec> <start_time> <end_usec> <end_time> <revision_number> <session_type> <session_subtype> <peer_triggered> <profile_status> <local_status> <local_error> <peer_address> <peer_sync_status> <merge_flags> <remote_status> <remote_error> ]

Syntax Description

Syntax Description

show

Show running system information

switch-profile

Show switch-profile

session-history

Switch-profile session-history

profile-name

(Optional) switch-profile name

status

Switch-profile sync status

commit

Switch-profile last commit status

__readonly__

(Optional)

prof-name

(Optional)

TABLE_session

(Optional)

session_index

(Optional)

start_usec

(Optional)

start_time

(Optional)

end_usec

(Optional)

end_time

(Optional)

revision_number

(Optional)

session_type

(Optional)

session_subtype

(Optional)

peer_triggered

(Optional)

profile_status

(Optional)

local_status

(Optional)

local_error

(Optional)

peer_address

(Optional)

peer_sync_status

(Optional)

merge_flags

(Optional)

remote_status

(Optional)

remote_error

(Optional)

Command Mode

- /exec

show switch-profile buffer

show switch-profile [ <profile-name> ] buffer [ __readonly__ <prof-name> <seq_no> <cmd> ]

Syntax Description

Syntax Description

show

Show running system information

switch-profile

Show switch-profile

buffer

buffered commands

profile-name

(Optional) switch-profile name

__readonly__

(Optional)

prof-name

(Optional)

seq_no

(Optional)

cmd

(Optional)

Command Mode

- /exec

show switch-profile peer

show switch-profile [ <profile-name> ] peer [ <dest-ip> ] [ details ] [ __readonly__ <prof-name> <rev> <peer_address> <peer_sync_status> <merge_flags> <remote_status> <remote_error> <cmd> ]

Syntax Description

Syntax Description

show

Show running system information

switch-profile

Show switch-profile

profile-name

(Optional) switch-profile name

peer

peer info

dest-ip

(Optional) IPv4 address (A.B.C.D) of destination

details

(Optional) information in detail

__readonly__

(Optional)

prof-name

(Optional)

rev

(Optional)

peer_address

(Optional)

peer_sync_status

(Optional)

merge_flags

(Optional)

remote_status

(Optional)

remote_error

(Optional)

cmd

(Optional)

Command Mode

- /exec

show switch-profile status

show switch-profile [ <profile-name> ] status [ __readonly__ <prof-name> <start_usec> <start_time> <end_usec> <end_time> <revision_number> <session_type> <session_subtype> <peer_triggered> <profile_status> <local_status> <local_error> <peer_address> <peer_sync_status> <merge_flags> <remote_status> <remote_error> ]

Syntax Description

Syntax Description

show

Show running system information

switch-profile

Show switch-profile

status

Switch-profile sync status

profile-name

(Optional) switch-profile name

__readonly__

(Optional)

prof-name

(Optional)

start_usec

(Optional)

start_time

(Optional)

end_usec

(Optional)

end_time

(Optional)

revision_number

(Optional)

session_type

(Optional)

session_subtype

(Optional)

peer_triggered

(Optional)

profile_status

(Optional)

local_status

(Optional)

local_error

(Optional)

peer_address

(Optional)

peer_sync_status

(Optional)

merge_flags

(Optional)

remote_status

(Optional)

remote_error

(Optional)

Command Mode

- /exec

show switch-scope controller

show switch-scope controller

Syntax Description

Syntax Description

show

Show running system information

switch-scope

switch-scope

controller

Controller command

Command Mode

- /exec

show switching-mode

show switching-mode [ __readonly__ TABLE_switching_mode <switching-mode-desc> ]

Syntax Description

Syntax Description

show

Show running system information

switching-mode

Show the operating switching mode

__readonly__

(Optional)

TABLE_switching_mode

(Optional) the xml switching_mode configuration

switching-mode-desc

(Optional) switching mode description

Command Mode

- /exec

show switching-mode fabric-speed

show switching-mode fabric-speed [ __readonly__ TABLE_switching_mode <switching-mode-desc> ]

Syntax Description

Syntax Description

show

Show running system information

switching-mode

Show the operating switching mode

__readonly__

(Optional)

TABLE_switching_mode

(Optional) the xml switching_mode configuration

switching-mode-desc

(Optional) switching mode description

fabric-speed

Show the fabric speed

Command Mode

- /exec

show system auto-collect tech-support

show system auto-collect tech-support

Syntax Description

Syntax Description

show

Show running system information

system

System management commands

auto-collect

Auto collection of information

tech-support

Collect tech-support in case of service causing supervisor reset

Command Mode

- /exec

show system clis event-history

show system [ internal ] clis event-history { nvdb | client | errors | parser | ha | cli | objstr | objstr-errors }

Syntax Description

Syntax Description

show

Display output

system

System-related show commands

internal

(Optional) Commands for internal use

clis

cli server

event-history

Event history logs for clis

nvdb

Log of NVDB and PSS events

client

Log of client interaction events

errors

Log of errors

parser

Log of parser events

ha

Log of ha events

cli

Log of command events

objstr

Log of Object Store events

objstr-errors

Log of Object Store error events

Command Mode

- /exec

show system cores

show system cores [ __readonly__ { <content> } ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

cores

Displays core transfer option

__readonly__

(Optional)

content

(Optional) Core transfer option

Command Mode

- /exec

show system dme status

show system dme status

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

dme

Display dme information

status

Display dme enable/disable status information

Command Mode

- /exec

show system error-id

show system error-id { list | <i0> } [ __readonly__ <errorid> <facility> <desc> ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

error-id

Show description about errors

list

Show description about all error IDs

i0

Show description about specific error

__readonly__

(Optional)

errorid

(Optional)

facility

(Optional)

desc

(Optional)

Command Mode

- /exec

show system exception-info

show system exception-info

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

exception-info

Show last exception log information

Command Mode

- /exec

show system fabric-mode

show system fabric-mode [ __readonly__ TABLE_system_fabric_mode <system-fabric-mode-desc> ]

Syntax Description

Syntax Description

show

Show running system information

system

Show system information

fabric-mode

Show the fabric operation mode information

__readonly__

(Optional)

TABLE_system_fabric_mode

(Optional) the xml system_fabric_mode configuration

system-fabric-mode-desc

(Optional) system fabric mode description

Command Mode

- /exec

show system fast-reload stabilization-timer

show system fast-reload stabilization-timer

Syntax Description

Syntax Description

show

Show running system information

system

System management commands

fast-reload

fast-reload software

stabilization-timer

Network stabilization time in seconds before fast-reload can be executed after the previous reload

Command Mode

- /exec

show system inband queuing statistics

show system inband queuing statistics [ __readonly__ { TABLE_sys_inband_queue_stats <inbandpktunmap> <inbandpktbpduqueue> <inbandpktmapq0> <inbandpktmapq1> <klmpktmapbpdu> <klmpktmaparp> <klmpktmapq0> <klmpktmapq1> <klmpktmapveobc> <queuename> [ TABLE_bpdu_stats { <pmrecvpkts> <pmdroppkts> <pmcongested> <rcvbuf> <sndbuf> <pmnodrop> } ] [ TABLE_q_stats { <indexstat> <ipmrecvpkts> <ipmdroppkts> <ipmcongested> <ircvbuf> <isndbuf> <ipmnodrop> } ] } ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

inband

Inband Commands

queuing

Inband Queuing commands

statistics

Inband statistics

__readonly__

(Optional)

TABLE_sys_inband_queue_stats

(Optional) System Inband Statistics

inbandpktunmap

(Optional) Inband packets unmapped

inbandpktbpduqueue

(Optional) Inband packets mapped to bpdu

inbandpktmapq0

(Optional) Inband packets mapped to q0

inbandpktmapq1

(Optional) Inband packets mapped to q1

klmpktmapbpdu

(Optional) In KLM packets mapped to bpdu

klmpktmaparp

(Optional) In KLM packets mapped to arp

klmpktmapq0

(Optional) In KLM packets mapped to q0

klmpktmapq1

(Optional) In KLM packets mapped to q1

klmpktmapveobc

(Optional) In KLM packets mapped to veobc

queuename

(Optional) Inband queue name

TABLE_bpdu_stats

(Optional) BPDU Statistics

pmrecvpkts

(Optional) BPDU Receive Packets

pmdroppkts

(Optional) BPDU Drop Packets

pmcongested

(Optional) BPDU Congested

rcvbuf

(Optional) BPDU Receive Buffer

sndbuf

(Optional) BPDU Send Buffer

pmnodrop

(Optional) BPDU No drop

TABLE_q_stats

(Optional) Queue Statistics

indexstat

(Optional) Queue Index

ipmrecvpkts

(Optional) Queue receive packets

ipmdroppkts

(Optional) Queue drop packets

ipmcongested

(Optional) Queue Congested

ircvbuf

(Optional) Queue receive buffer

isndbuf

(Optional) Queue send buffer

ipmnodrop

(Optional) Queue no drop

Command Mode

- /exec

show system inband queuing status

show system inband queuing status [ __readonly__ [ { TABLE_sys_inband_queue_status <pminbandweigh0> <pminbandweigh1> <pminbandweigh2> } ] ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

inband

Inband Commands

queuing

Inband Queuing commands

status

Selective Packet Discard Information

__readonly__

(Optional)

TABLE_sys_inband_queue_status

(Optional) System Inband Status

pminbandweigh0

(Optional) BPDU Weight

pminbandweigh1

(Optional) Q0 Weight

pminbandweigh2

(Optional) Q1 Weight

Command Mode

- /exec

show system kgdb

show system kgdb

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

kgdb

Displays state of kgdb_enable flag

Command Mode

- /exec

show system login

show system login [ __readonly__ [ <acc_list> <attempts> ] [ <within> <block_for> <time> ] [ <fail_count> ] ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

login

Display Secure Login Configurations and State

__readonly__

(Optional)

acc_list

(Optional) Appiled ACL's

attempts

(Optional) Number of login failures

within

(Optional) Number of login failures within time

block_for

(Optional) Login disabled for time

time

(Optional) Time remaining to re-enble login

fail_count

(Optional) Login failure count

Command Mode

- /exec

show system login failures

show system login failures [ __readonly__ [ { TABLE_loginStats <username> <port> <remote_addr> <app_name> <time> } ] ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

login

Secure Login

failures

Display Login failures in the current watch period

__readonly__

(Optional)

TABLE_loginStats

(Optional)

username

(Optional) User name

port

(Optional) Login port number

remote_addr

(Optional) Remote address

app_name

(Optional) Application name

time

(Optional) Login time

Command Mode

- /exec

show system memory-thresholds

show system memory-thresholds [ __readonly__ <critical_mem_threshold> <severe_mem_threshold> <minor_mem_threshold> ]

Syntax Description

Syntax Description

show

Show running system information

__readonly__

(Optional)

critical_mem_threshold

(Optional) Critical System Memory Threshold

severe_mem_threshold

(Optional) Severe System Memory Threshold

minor_mem_threshold

(Optional) Minor System Memory Threshold

system

System management commands

memory-thresholds

Set memory thresholds on the card

Command Mode

- /exec

show system mode

show system mode [ __readonly__ <system_mode> [ <timer_state> ] ]

Syntax Description

Syntax Description

show

Show running system information

system

System configuration commands

mode

Show system mode

__readonly__

(Optional)

system_mode

(Optional) system mode

timer_state

(Optional) timer state

Command Mode

- /exec

show system nve infra-vlans

show system nve infra-vlans [ __readonly__ <output> ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

nve

Show NVE information

infra-vlans

Show NVE infra-vlans related information

__readonly__

(Optional)

output

(Optional)

Command Mode

- /exec

show system pss shrink status

show system pss shrink status [ details ] [ __readonly__ { [ <summary> ] [ TABLE_per_vdc <vdc_id> [ TABLE_detail_events <service> <vdc> <event> ] ] [ TABLE_events <service> <vdc> <event> ] } ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

pss

Displays last pss shrink status

shrink

Displays last pss shrink status

status

Displays last pss shrink status

details

(Optional) Displays last pss shrink status details

__readonly__

(Optional)

summary

(Optional) PSS shrink summary

TABLE_per_vdc

(Optional)

vdc_id

(Optional) VDC id

TABLE_detail_events

(Optional) PSS shrink events

service

(Optional) Service name

vdc

(Optional) VDC number

event

(Optional) PSS evnets

TABLE_events

(Optional) PSS shrink events

service

(Optional) Service name

vdc

(Optional) VDC number

event

(Optional) PSS evnets

Command Mode

- /exec

show system redundancy ha status

show system redundancy ha status [ __readonly__ { [ TABLE_ha_status <vdc_id> <this_sup_internal_state> <other_sup_internal_state> ] } ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

redundancy

redundancy status

ha

vdc redundancy status

status

all vdc redundancy status

__readonly__

(Optional)

TABLE_ha_status

(Optional) HA status for all vdcs

vdc_id

(Optional) vdc id

this_sup_internal_state

(Optional) This Supervisor State

other_sup_internal_state

(Optional) Remote Supervisor State

Command Mode

- /exec

show system redundancy status

show system redundancy status [ __readonly__ { <rdn_mode_admin> <rdn_mode_oper> <this_sup> <this_sup_rdn_state> <this_sup_sup_state> <this_sup_internal_state> [ <other_sup> ] [ <other_sup_rdn_state> ] [ <other_sup_sup_state> ] [ <other_sup_internal_state> ] } ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

redundancy

redundancy status

status

Current redundancy status

__readonly__

(Optional) readonly

rdn_mode_admin

(Optional) Redundancy Mode Admin

rdn_mode_oper

(Optional) Redundancy Mode Operational

this_sup

(Optional) This Supervisor

this_sup_rdn_state

(Optional) Redundancy State

this_sup_sup_state

(Optional) Supervisor State

this_sup_internal_state

(Optional) Supervisor State

other_sup

(Optional) Other Supervisor

other_sup_sup_state

(Optional) Supervisor State

other_sup_rdn_state

(Optional) Redundancy tate

other_sup_internal_state

(Optional) Supervisor State

Command Mode

- /exec

show system reset-reason

show system reset-reason [ __readonly__ { TABLE_reason <slot> { TABLE_rr <time> <reason> <service> <version> } } ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

reset-reason

Show last reset reason

__readonly__

(Optional)

TABLE_reason

(Optional) Reset reason info

slot

(Optional) slot

TABLE_rr

(Optional) reset reason

time

(Optional) time

reason

(Optional) reset reason

service

(Optional) service name

version

(Optional) version

Command Mode

- /exec

show system reset-reason

show system reset-reason <s0> <santa-cruz-range> [ __readonly__ { TABLE_xbarreason <slot> { TABLE_rr <time> <reason> <service> <version> } } ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

reset-reason

Show last reset reason

s0

Show xbar module reset reason

santa-cruz-range

please enter the xbar module number

__readonly__

(Optional)

TABLE_xbarreason

(Optional) Reset reason info

slot

(Optional) slot

TABLE_rr

(Optional) reset reason

time

(Optional) time

reason

(Optional) reset reason

service

(Optional) service name

version

(Optional) version

Command Mode

- /exec

show system reset-reason module

show system reset-reason module <module> [ __readonly__ { TABLE_reason <slot> { TABLE_rr <time> <reason> <service> <version> } } ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

reset-reason

Show last reset reason

module

Show per module reset-reason code

module

please enter module number

__readonly__

(Optional)

TABLE_reason

(Optional) Reset reason info

slot

(Optional) slot

TABLE_rr

(Optional) reset reason

time

(Optional) time

reason

(Optional) reset reason

service

(Optional) service name

version

(Optional) version

Command Mode

- /exec

show system resources

show system resources [ __readonly__ { [ <load_avg_1min> ] [ <load_avg_5min> ] [ <load_avg_15min> ] [ <processes_total> ] [ <processes_running> ] [ <cpu_state_user> ] [ <cpu_state_kernel> ] [ <cpu_state_idle> ] [ TABLE_cpu_usage <cpuid> <user> <kernel> <idle> ] [ <memory_usage_total> ] [ <memory_usage_used> ] [ <memory_usage_free> ] [ <current_memory_status> ] } ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

resources

Show system resources

__readonly__

(Optional)

TABLE_cpu_usage

(Optional) All Cpu Usage Information

load_avg_1min

(Optional) Load Average 1 Min

load_avg_5min

(Optional) Load Average 5 Min

load_avg_15min

(Optional) Load Average 15 Min

processes_total

(Optional) Total processes

processes_running

(Optional) Running Processes

cpu_state_user

(Optional) CPU State User

cpu_state_kernel

(Optional) CPU State Kernel

cpu_state_idle

(Optional) CPU State Idle

cpuid

(Optional) CPU id

user

(Optional) user time

kernel

(Optional) kernel time

idle

(Optional) idle time

memory_usage_total

(Optional) Memory Usage Total

memory_usage_used

(Optional) Memory Usage Used

memory_usage_free

(Optional) Memory Usage Free

current_memory_status

(Optional) Current Memory Status

Command Mode

- /exec

show system resources

show system resources <i0>

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

resources

Show system resources

i0

time interval in seconds

Command Mode

- /exec

show system resources module

show system resources [ <i0> ] module <module>

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

resources

Show system resources

i0

(Optional) time interval in seconds

module

Show system resources for specified module

module

module number

Command Mode

- /exec

show system resources module all

show system resources [ <i0> ] module all

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

resources

Show system resources

i0

(Optional) time interval in seconds

module

Show system resources for specified module

all

Show system resources for all modules

Command Mode

- /exec

show system routing mode

show system routing mode [ __readonly__ TABLE_system_routing_mode <system-routing-mode-desc> ]

Syntax Description

Syntax Description

show

Show running system information

system

Show system information

routing

Show routing related information

mode

Show mode related information

__readonly__

(Optional)

TABLE_system_routing_mode

(Optional) the xml system_routing_mode configuration

system-routing-mode-desc

(Optional) system routing mode description

Command Mode

- /exec

show system srg

show system srg

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

srg

Displays the system SRG

Command Mode

- /exec

show system standby manual-boot

show system standby manual-boot [ __readonly__ { <content> } ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

standby

Displays system standby manual boot option

manual-boot

Displays system standby manual boot option

__readonly__

(Optional)

content

(Optional) Displays system standby manual boot option

Command Mode

- /exec

show system switch-mode

show system switch-mode [ __readonly__ <op_mode> ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

switch-mode

Show current operational mode of the switch

__readonly__

(Optional)

op_mode

(Optional) Operational Mode

Command Mode

- /exec

show system switchover impact

show system switchover impact [ <uri0> [ <uri1> ] ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

switchover

Show the software switchover impact between two images

impact

impact {standby_system_uri} {active_system_uri}

uri0

(Optional) Enter standby URI

uri1

(Optional) Enter active URI

Command Mode

- /exec

show system uptime

show system uptime [ __readonly__ { <sys_st_time> <sys_up_days> <sys_up_hrs> <sys_up_mins> <sys_up_secs> <kn_up_days> <kn_up_hrs> <kn_up_mins> <kn_up_secs> [ <as_up_days> ] [ <as_up_hrs> ] [ <as_up_mins> ] [ <as_up_secs> ] } ]

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

uptime

Show how long the system has been up and running

__readonly__

(Optional) readonly

sys_st_time

(Optional) System Start Time

sys_up_days

(Optional) System Uptime Days

sys_up_hrs

(Optional) System Uptime Hours

sys_up_mins

(Optional) System Uptime Minutes

sys_up_secs

(Optional) System Uptime Seconds

kn_up_days

(Optional) Kernel Uptime Days

kn_up_hrs

(Optional) Kernel Uptime Hours

kn_up_mins

(Optional) Kernel Uptime Minutes

kn_up_secs

(Optional) Kernel Uptime Seconds

as_up_days

(Optional) Active Sup Uptime Days

as_up_hrs

(Optional) Active Sup Uptime Hours

as_up_mins

(Optional) Active Sup Uptime Minutes

as_up_secs

(Optional) Active Sup Uptime Seconds

Command Mode

- /exec

show system verify bios flash

show system verify bios { flash <i0> [ module <module> ] | protection <i1> [ module <module1> ] }

Syntax Description

Syntax Description

show

Show running system information

system

System-related show commands

verify

Verify commands

bios

Verify bios

flash

verify bios flash or protection status

i0

Select primary or alternate flash

module

(Optional) Module number

module

(Optional) Enter module number

protection

verify bios flash or protection status

i1

Select primary or alternate flash

module

(Optional) Module number

module1

(Optional) Enter module number

Command Mode

- /exec

show system vlan reserved

show system vlan reserved [ __readonly__ { TABLE_vlan <current_reserved_vlan_start> <current_reserved_vlan_end> <future_reserved_vlan_start> <future_reserved_vlan_end> } ]

Syntax Description

Syntax Description

show

Show running system information

system

system wide configuration

vlan

VLAN status

reserved

Show system VLAN allocation

__readonly__

(Optional) Read Only

TABLE_vlan

(Optional)

current_reserved_vlan_start

(Optional) System current running reserved vlan start

current_reserved_vlan_end

(Optional) System current running reserved vlan end

future_reserved_vlan_start

(Optional) System future running reserved vlan start

future_reserved_vlan_end

(Optional) System future running reserved vlan end

Command Mode

- /exec

Chapter 20. T Show Commands

- show table-map

- show tacacs-server

- show tacacs-server

- show tacacs-server directed-request

- show tacacs-server groups

- show tacacs-server sorted

- show tacacs-server statistics

- show tamnw internal errors

- show tamnw internal msgs

- show tech-support

- show tech-support aaa

- show tech-support aclmgr

- show tech-support aclmgr compressed

- show tech-support aclqos

- show tech-support aclqos compressed

- show tech-support adjmgr

- show tech-support all-binary

- show tech-support all

- show tech-support all binary

- show tech-support analytics

- show tech-support arp

- show tech-support ascii-cfg

- show tech-support bfd

- show tech-support bgp

- show tech-support biosd

- show tech-support bloggerd-all

- show tech-support bloggerd

- show tech-support bootvar

- show tech-support brief

- show tech-support callhome

- show tech-support cdp

- show tech-support cert-enroll

- show tech-support cfs

- show tech-support cli

- show tech-support clis

- show tech-support clock_manager

- show tech-support commands

- show tech-support controller

- show tech-support copp

- show tech-support dcbx

- show tech-support details

- show tech-support dhclient

- show tech-support dhcp

- show tech-support dme

- show tech-support dot1x

- show tech-support ecp

- show tech-support eem

- show tech-support eigrp

- show tech-support eltm

- show tech-support ethpm

- show tech-support evb

- show tech-support fabric forwarding

- show tech-support fast-reload

- show tech-support fc2

- show tech-support fips

- show tech-support gold

- show tech-support gpixm

- show tech-support ha

- show tech-support ha module

- show tech-support ha standby

- show tech-support hsrp

- show tech-support hsrp brief

- show tech-support icmpv6

- show tech-support im

- show tech-support imp

- show tech-support inband counters

- show tech-support include-time

- show tech-support install

- show tech-support interface-vlan

- show tech-support internal link-events

- show tech-support internal link-events module

- show tech-support internal module

- show tech-support internal vsan

- show tech-support ip

- show tech-support ip igmp

- show tech-support ip igmp snooping

- show tech-support ip msdp

- show tech-support ip pim

- show tech-support ip rsvp

- show tech-support ipqos

- show tech-support ipv6

- show tech-support ipv6 mld

- show tech-support ipv6 pim

- show tech-support isis

- show tech-support issu

- show tech-support l2

- show tech-support l2fm clients

- show tech-support l2fm detail

- show tech-support l2fm l2dbg

- show tech-support l2fm l2dbg

- show tech-support l2rib

- show tech-support l3vm

- show tech-support l3vpn

- show tech-support lacp

- show tech-support ldap

- show tech-support license

- show tech-support lim

- show tech-support lisp

- show tech-support lldp

- show tech-support logging

- show tech-support m2rib

- show tech-support macsec

- show tech-support mmode

- show tech-support module

- show tech-support module all

- show tech-support monitor

- show tech-support monitor erspan

- show tech-support monitorc-all

- show tech-support mpls ldp

- show tech-support mpls manager

- show tech-support mpls static

- show tech-support mpls strip

- show tech-support mpls switching

- show tech-support mpls traffic-eng

- show tech-support mplsfwd

- show tech-support mvpn

- show tech-support nat

- show tech-support nbm

- show tech-support netflow

- show tech-support netstack

- show tech-support netstack detail

- show tech-support ngoam

- show tech-support npacl

- show tech-support ns

- show tech-support ntp

- show tech-support nve

- show tech-support nxsdk

- show tech-support object-store user

- show tech-support onep

- show tech-support openflow

- show tech-support ospf

- show tech-support ospfv3

- show tech-support otv

- show tech-support otv isis

- show tech-support page

- show tech-support patch

- show tech-support pbr

- show tech-support pfstat

- show tech-support pixm-all

- show tech-support pixm

- show tech-support pixmc-all

- show tech-support pktmgr

- show tech-support platform-sdk

- show tech-support platform

- show tech-support plb-services

- show tech-support plcmgr

- show tech-support pltfm-config

- show tech-support port-channel

- show tech-support port-client-all

- show tech-support port-profile

- show tech-support port-security

- show tech-support port

- show tech-support private-vlan

- show tech-support ptp

- show tech-support radius

- show tech-support rip

- show tech-support routing

- show tech-support routing ipv6

- show tech-support rpm

- show tech-support satmgr

- show tech-support security

- show tech-support services

- show tech-support services

- show tech-support session-mgr

- show tech-support sflow

- show tech-support sksd

- show tech-support sla responder

- show tech-support sla sender

- show tech-support smartc

- show tech-support smm

- show tech-support snmp

- show tech-support sockets

- show tech-support statsclient

- show tech-support stp

- show tech-support sup-filesys

- show tech-support sysmgr

- show tech-support tacacs

- show tech-support telemetry

- show tech-support track

- show tech-support tunnel

- show tech-support udld

- show tech-support usd-all

- show tech-support vdc

- show tech-support virtual-service

- show tech-support vmtracker

- show tech-support vpc

- show tech-support vrrp

- show tech-support vrrp brief

- show tech-support vrrpv3

- show tech-support vshd

- show tech-support vxlan-evpn

- show tech-support vxlan

- show tech-support vxlan platform

- show tech-support xbar

- show tech-support xml

- show tech-support xos

- show telemetry control database

- show telemetry data collector brief

- show telemetry event collector stats

- show telemetry pipeline stats

- show telemetry transport

- show telnet server

- show terminal

- show terminal internal info

- show terminal output xml version

- show time-range

- show track

- show track brief

- show track internal errors

- show track internal info counters

- show track internal info global

- show track internal info object

- show track internal mem-stats

- show track internal msgs

- show ttag brief

- show tunnel iftable

- show tunnel inetconfigtable

- show tunnel internal database

- show tunnel internal database shared

- show tunnel internal event-history debug

- show tunnel internal event-history errors

- show tunnel internal event-history fsm-transition

- show tunnel internal event-history msgs

- show tunnel internal event-history ppf-fsm-transition

- show tunnel internal implicit

- show tunnel internal info global

- show tunnel internal mem-stats

show table-map

show table-map [ <tmap-name> | <default-tmap-enum-name> ] [ __readonly__ { [ TABLE_tmap <tmap-name> [ <desc> ] [ <def-value> ] [ <def-copy> ] [ <def-ignore> ] [ TABLE_list <frm-list> <to-val> ] ] } ]

Syntax Description

Syntax Description

show

Show running system information

table-map

Table maps

TABLE_tmap

(Optional) all tmap xml sessions

tmap-name

(Optional) Show a particular table map

default-tmap-enum-name

(Optional)

__readonly__

(Optional)

desc

(Optional) Description string

def-value

(Optional) Unspecified entries will default to this value

def-copy

(Optional) Map unspecified values to equivalent output value

def-ignore

(Optional) Ignore unspecified values

TABLE_list

(Optional) table map lists

frm-list

(Optional) Original list of values which are to be mapped

to-val

(Optional) To value

Command Mode

- /exec

show tacacs-server

show tacacs-server [ __readonly__ [ <global_secretKey> ] { <global_timeout> <global_deadtime> } [ <global_source_intf> ] [ <global_idle_time> ] { [ <global_testUsername> ] [ <global_testPassword> ] } { <server_count> } [ TABLE_server <server_ip> <port> [ <secretKey> ] [ <timeout> ] ] [ { <host0> <tacacs_port> <shared_key> <idle_time><test_username> <test_password> } + ] ]

Syntax Description

Syntax Description

show

Show running system information

tacacs-server

Show TACACS+ configuration information

__readonly__

(Optional)

global_secretKey

(Optional) Global shared secret

global_timeout

(Optional) Global timeout for tacacs

global_deadtime

(Optional) Global deadtime

global_source_intf

(Optional) Tacacs global source interface

global_idle_time

(Optional) Tacacs global idle-time for server monitoring

global_testUsername

(Optional) Username of global test parameters

global_testPassword

(Optional) Password of global test parameters

server_count

(Optional) Total number of tacacs servers configured

TABLE_server

(Optional)

server_ip

(Optional) Ip address of the server

port

(Optional) Port used for this server

secretKey

(Optional) Shared secret between the server and the tacacs client

timeout

(Optional) Timeout for this tacacs server

host0

(Optional) DNS name or IP address

tacacs_port

(Optional) TACACS+ server port

shared_key

(Optional) TACACS+ shared secret

test_password

(Optional) User password in test packets

Command Mode

- /exec

show tacacs-server

show tacacs-server { <host0> } [ __readonly__ { <host1> } <tacacs_port> <shared_key> <idle_time><test_username> <test_password> ]

Syntax Description

Syntax Description

show

Show running system information

tacacs-server

Show TACACS+ configuration information

host0

DNS name or IP address

__readonly__

(Optional)

host1

(Optional) DNS name or IP address

tacacs_port

(Optional) TACACS+ server port

shared_key

(Optional) TACACS+ shared secret

test_password

(Optional) User password in test packets

Command Mode

- /exec

show tacacs-server directed-request

show tacacs-server directed-request [ __readonly__ { <tacacs_directedRequest_status> } ]

Syntax Description

Syntax Description

show

Show running system information

tacacs-server

Show TACACS+ configuration information

directed-request

Show directed server enable configuration

__readonly__

(Optional)

tacacs_directedRequest_status

(Optional) status of tacacs-server directed request

Command Mode

- /exec

show tacacs-server groups

show tacacs-server groups [ <s0> ] [ __readonly__ [ <num_of_groups> ] [ TABLE_group <group_name> [ TABLE_server <server_ip> [ <port> ] ] [ <dead_time> ] [ <vrf_name> ] [ <source_interface> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

tacacs-server

Show TACACS+ configuration information

groups

Show TACACS+ server group configuration information

s0

(Optional) TACACS+ server group name

__readonly__

(Optional)

num_of_groups

(Optional) number of groups

TABLE_group

(Optional)

group_name

(Optional) name of the group

TABLE_server

(Optional)

server_ip

(Optional) DNS name or IP address

port

(Optional) TACACS+ server port

dead_time

(Optional) Time interval for which the server is marked as dead before sending a test command

vrf_name

(Optional) name of the vrf

source_interface

(Optional) Interface Description

Command Mode

- /exec

show tacacs-server sorted

show tacacs-server sorted [ __readonly__ [ <global_secretKey> ] { <global_timeout> <global_deadtime> } [ <global_source_intf> ] [ <global_idle_time> ] { [ <global_testUsername> ] [ <global_testPassword> ] } { <server_count> } [ TABLE_server <server_ip> <port> [ <secretKey> ] [ <timeout> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

tacacs-server

Show TACACS+ configuration information

sorted

Show TACACS+ servers sorted by server name

__readonly__

(Optional)

global_secretKey

(Optional) Global shared secret

global_timeout

(Optional) Global timeout for tacacs

global_deadtime

(Optional) Global deadtime

global_source_intf

(Optional) Tacacs global source interface

global_idle_time

(Optional) Tacacs global idle-time for server monitoring

global_testUsername

(Optional) Username of global test parameters

global_testPassword

(Optional) Password of global test parameters

server_count

(Optional) Total number of tacacs servers configured

TABLE_server

(Optional)

server_ip

(Optional) Ip address of the server

port

(Optional) Port used for this server

secretKey

(Optional) Shared secret between the server and the tacacs client

timeout

(Optional) Timeout for this tacacs server

Command Mode

- /exec

show tacacs-server statistics

show tacacs-server statistics { <host0> } [ __readonly__ { <server_state> [ <clock_time> { monitoring_statistics <time_in_pstate> <ndead> <tt_in_dstate> } ] } { auth_statistics <auth_failed_transactions> <auth_succ_transactions> <auth_req_sent> <auth_req_timedout> <auth_resp_no_match> <auth_resp_not_processed> <auth_resp_error> } { autho_statistics <autho_failed_transactions> <autho_succ_transactions> <autho_req_sent> <autho_req_timedout> <autho_resp_no_match> <autho_resp_not_processed> <autho_resp_error> } { acct_statistics <acct_failed_transactions> <acct_succ_transactions> <acct_req_sent> <acct_req_timedout> <acct_resp_no_match> <acct_resp_not_processed> <acct_resp_error> } ]

Syntax Description

Syntax Description

show

Show running system information

tacacs-server

Show TACACS+ configuration information

statistics

Show TACACS statistics

host0

DNS name or IP address

__readonly__

(Optional)

server_state

(Optional) Show state of server

clock_time

(Optional) Show clock time in terms of hours, minutes and seconds

monitoring_statistics

(Optional) Monitoring Statistics

time_in_pstate

(Optional) Time in previous state

ndead

(Optional) Number of times dead

tt_in_dstate

(Optional) Total time in dead state

auth_statistics

(Optional) Authentication Statistics

autho_statistics

(Optional) Authorization Statistics

acct_statistics

(Optional) Accounting Statistics

auth_failed_transactions

(Optional) Authentication: Failed transactions

auth_succ_transactions

(Optional) Authentication: Successful transactions

auth_req_sent

(Optional) Authentication: Requests sent

auth_req_timedout

(Optional) Authentication: Requests timedout

auth_resp_no_match

(Optional) Authentication: Responses with no matching requests

auth_resp_not_processed

(Optional) Authentication: Responses not processed

auth_resp_error

(Optional) Authentication: Responses containing errors

autho_failed_transactions

(Optional) Authorization: Failed transactions

autho_succ_transactions

(Optional) Authorization: Successful transactions

autho_req_sent

(Optional) Authorization: Requests sent

autho_req_timedout

(Optional) Authorization: Requests timedout

autho_resp_no_match

(Optional) Authorization: Responses with no matching requests

autho_resp_not_processed

(Optional) Authorization: Responses not processed

autho_resp_error

(Optional) Authorization: Responses containing errors

acct_failed_transactions

(Optional) Accounting: Failed transactions

acct_succ_transactions

(Optional) Accounting: Successful transactions

acct_req_sent

(Optional) Accounting: Requests sent

acct_req_timedout

(Optional) Accounting: Requests timedout

acct_resp_no_match

(Optional) Accounting: Responses with no matching requests

acct_resp_not_processed

(Optional) Accounting: Responses not processed

acct_resp_error

(Optional) Accounting: Responses containing errors

Command Mode

- /exec

show tamnw internal errors

show tamnw internal [ event-history ] errors

Syntax Description

Syntax Description

show

Show running system information

tamnw

Show information about tamnw

internal

Show internal tamnw information

event-history

(Optional) Show various event logs of Tamnws

errors

Show error logs of TAMNW

Command Mode

- /exec

show tamnw internal msgs

show tamnw internal [ event-history ] msgs

Syntax Description

Syntax Description

show

Show running system information

tamnw

Show information about tamnw

internal

Show internal tamnw information

event-history

(Optional) Show various event logs of Tamnws

msgs

Show various message logs of TAMNW

Command Mode

- /exec

show tech-support

show tech-support [ time-optimized ] [ forced ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

time-optimized

(Optional) Gather tech-support faster, requires more memory and disk space

forced

(Optional) Do not check for standby being present

Command Mode

- /exec

show tech-support aaa

show tech-support aaa

Syntax Description

Syntax Description

show

show tech-support

tech-support

Gather information for troubleshooting

aaa

Display aaa information

Command Mode

- /exec

show tech-support aclmgr

show tech-support aclmgr [ detail ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

aclmgr

ACL commands

detail

(Optional) Detailed Tech Support

Command Mode

- /exec

show tech-support aclmgr compressed

show tech-support aclmgr compressed <uri0> [ detail ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

aclmgr

ACL commands

compressed

Save compressed aclqos technical support

uri0

Enter filename to store

detail

(Optional) Detailed Tech Support

Command Mode

- /exec

show tech-support aclqos

show tech-support aclqos

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

aclqos

Show information for aclqos technical support

Command Mode

- /exec

show tech-support aclqos compressed

show tech-support aclqos compressed <uri0>

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

aclqos

Show information for aclqos technical support

compressed

Save compressed aclqos technical support

uri0

Enter filename to store

Command Mode

- /exec

show tech-support adjmgr

show tech-support adjmgr [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

adjmgr

Display Adjmgr information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support all-binary

show tech-support all-binary

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

all-binary

Dump tech support for all applications in binary

Command Mode

- /exec

show tech-support all

show tech-support all

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

all

Gather detailed information for troubleshooting

Command Mode

- /exec

show tech-support all binary

show tech-support all binary <uri0>

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

all

Gather detailed information for troubleshooting

binary

Gather tech support for all applications in binary format

uri0

Select destination filesystem to save the binary output (NOTE: The output file name will be automatically generated and cannot be chosen)

Command Mode

- /exec

show tech-support analytics

show tech-support analytics [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

analytics

Show Analytics tech-support information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support arp

show tech-support arp [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

arp

Display ARP information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ascii-cfg

show tech-support ascii-cfg

Syntax Description

Syntax Description

show

Show running system information

tech-support

Show information for technical support personnel

ascii-cfg

Show ascii-cfg information for technical support personnel

Command Mode

- /exec

show tech-support bfd

show tech-support bfd

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

bfd

BFD commands

Command Mode

- /exec

show tech-support bgp

show tech-support bgp [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

bgp

Display BGP status and configuration

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support biosd

show tech-support biosd

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

biosd

Gather bios install log for trouble shooting

Command Mode

- /exec

show tech-support bloggerd-all

show tech-support bloggerd-all

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

bloggerd-all

Gather detailed information for bloggerd troubleshooting from ALL modules

Command Mode

- /exec

show tech-support bloggerd

show tech-support bloggerd

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

bloggerd

Gather detailed information for bloggerd troubleshooting

Command Mode

- /exec

show tech-support bootvar

show tech-support bootvar

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

bootvar

Gather detailed information for bootvar troubleshooting

Command Mode

- /exec

show tech-support brief

show tech-support brief

Syntax Description

Syntax Description

show

Show running system summary information

tech-support

Gather information for troubleshooting

brief

Gather summary information for troubleshooting

Command Mode

- /exec

show tech-support callhome

show tech-support callhome

Syntax Description

Syntax Description

show

show tech-support

tech-support

Gather information for troubleshooting

callhome

callhome troubleshooting information

Command Mode

- /exec

show tech-support cdp

show tech-support cdp

Syntax Description

Syntax Description

show

show running system information

tech-support

Gather information for troubleshooting

cdp

Gather information for CDP trouble shooting

Command Mode

- /exec

show tech-support cert-enroll

show tech-support cert-enroll

Syntax Description

Syntax Description

show

show commands

tech-support

Gather information for troubleshooting

cert-enroll

Display certificates information

Command Mode

- /exec

show tech-support cfs

show tech-support cfs [ { commands | name <cfs-dyn-app-name> [ commands1 ] } ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

cfs

Gather detailed information for cfs troubleshooting

commands

(Optional) CFS show tech commands

name

(Optional) Gather detailed information of cfs for a specified application

cfs-dyn-app-name

(Optional) Registered name of the local application

commands1

(Optional) CFS application show tech commands

Command Mode

- /exec

show tech-support cli

show tech-support cli

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

cli

Gather information for parser troubleshooting

Command Mode

- /exec

show tech-support clis

show tech-support clis [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

clis

Gather information for CLI Server troubleshooting

brief

(Optional) Detailed information

Command Mode

- /exec

show tech-support clock_manager

show tech-support clock_manager

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

clock_manager

Gather detailed information for clock manager troubleshooting

Command Mode

- /exec

show tech-support commands

show tech-support commands

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

commands

Show commands executed as part of show tech-support commands

Command Mode

- /exec

show tech-support controller

show tech-support controller

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

controller

Gather information for Controller troubleshooting

Command Mode

- /exec

show tech-support copp

show tech-support copp

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

copp

Gather information for copp trouble shooting

Command Mode

- /exec

show tech-support dcbx

show tech-support dcbx

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

dcbx

Gather detailed information for DCBX component

Command Mode

- /exec

show tech-support details

show tech-support details [ space-optimized ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

details

Gather detailed information for troubleshooting

space-optimized

(Optional) Gather tech-support info. using less memory and disk space

Command Mode

- /exec

show tech-support dhclient

show tech-support dhclient

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

dhclient

Gather information for dhclient trouble shooting

Command Mode

- /exec

show tech-support dhcp

show tech-support dhcp

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

dhcp

Gather detailed information for dhcp troubleshooting

Command Mode

- /exec

show tech-support dme

show tech-support dme

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

dme

Gather detailed information for dme troubleshooting

Command Mode

- /exec

show tech-support dot1x

show tech-support dot1x

Syntax Description

Syntax Description

show

show tech-support

tech-support

Gather information for troubleshooting

dot1x

Display dot1x information

Command Mode

- /exec

show tech-support ecp

show tech-support ecp

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ecp

ECP (Edge Control Protocol)

Command Mode

- /exec

show tech-support eem

show tech-support eem

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

eem

Show EEM tech-support information

Command Mode

- /exec

show tech-support eigrp

show tech-support eigrp [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

eigrp

Display EIGRP status and configuration

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support eltm

show tech-support eltm [ detail ]

Syntax Description

Syntax Description

show

show tech-support

tech-support

Gather information for trouble-shooting

eltm

eltm debug info

detail

(Optional) Detailed information

Command Mode

- /exec

show tech-support ethpm

show tech-support ethpm

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ethpm

Gather detailed information for ETHPM troubleshooting

Command Mode

- /exec

show tech-support evb

show tech-support evb

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

evb

EVB (Edge Virtual Bridge)

Command Mode

- /exec

show tech-support fabric forwarding

show tech-support fabric forwarding

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

Command Mode

- /exec

show tech-support fast-reload

show tech-support fast-reload

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

fast-reload

Gather information for troubleshooting fast-reload timings

Command Mode

- /exec

show tech-support fc2

show tech-support fc2 [ commands ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

fc2

Show information for fc2 technical support

commands

(Optional) Show commands run as part of fc2 technical support

Command Mode

- /exec

show tech-support fips

show tech-support fips

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

fips

show tech support information for security

Command Mode

- /exec

show tech-support gold

show tech-support gold

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

gold

Show gold tech-support information

Command Mode

- /exec

show tech-support gpixm

show tech-support gpixm

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

gpixm

Gather detailed information for GLOBAL-PIXM troubleshooting

Command Mode

- /exec

show tech-support ha

show tech-support ha [ commands ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ha

Gather detailed information for HA troubleshooting

commands

(Optional) Show commands executed as part of show tech-support ha commands

Command Mode

- /exec

show tech-support ha module

show tech-support ha module <module>

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ha

Gather detailed information for HA troubleshooting

module

Gather info related to a module

module

Enter module number

Command Mode

- /exec

show tech-support ha standby

show tech-support ha standby [ commands ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ha

Gather detailed information for HA troubleshooting

standby

Gather detailed information for HA troubleshooting from standby supervisor

commands

(Optional) Show commands executed as part of show tech-support ha commands

Command Mode

- /exec

show tech-support hsrp

show tech-support hsrp

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

hsrp

Show hsrp tech-support information

Command Mode

- /exec

show tech-support hsrp brief

show tech-support hsrp brief

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

hsrp

Show hsrp tech-support information

brief

Show tech-support information in brief

Command Mode

- /exec

show tech-support icmpv6

show tech-support icmpv6 [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

icmpv6

Display Icmpv6 information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support im

show tech-support im

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

im

Gather detailed information for IM troubleshooting

Command Mode

- /exec

show tech-support imp

show tech-support imp

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

imp

IMP commands

Command Mode

- /exec

show tech-support inband counters

show tech-support inband counters

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

inband

Gather all information about inband data path

counters

Gather all counters in inband data path

Command Mode

- /exec

show tech-support include-time

show tech-support include-time

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

include-time

Gather tech-support and capture time taken to execute each command

Command Mode

- /exec

show tech-support install

show tech-support install

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

install

Gather detailed information for rpm/package install operation

Command Mode

- /exec

show tech-support interface-vlan

show tech-support interface-vlan

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

interface-vlan

Gather detailed information for interface-vlan troubleshooting

Command Mode

- /exec

show tech-support internal link-events

show tech-support internal link-events

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

internal

Gather internal info for troubleshooting

link-events

Gather info related to link-events

Command Mode

- /exec

show tech-support internal link-events module

show tech-support internal link-events module <module>

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

internal

Gather internal info for troubleshooting

link-events

Gather info related to link-events

module

Gather info related to a module

module

Enter module number

Command Mode

- /exec

show tech-support internal module

show tech-support internal module <module>

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

internal

Gather internal info for troubleshooting

module

Gather info related to a module

module

Enter module number

Command Mode

- /exec

show tech-support internal vsan

show tech-support internal vsan <vsan_id>

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

internal

Gather internal info for troubleshooting

vsan

Gather info related to a vsan

vsan_id

Enter VSAN number

Command Mode

- /exec

show tech-support ip

show tech-support ip [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ip

Display IP information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ip igmp

show tech-support ip igmp [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ip

Display IP information

igmp

Display IGMP status and configuration

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ip igmp snooping

show tech-support ip igmp snooping [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ip

Display IP information

igmp

Display IGMP status and configuration

snooping

IGMP Snooping information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ip msdp

show tech-support ip msdp [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ip

Display IP information

msdp

Display MSDP status and configuration

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ip pim

show tech-support ip pim [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ip

Display IP information

pim

PIM global configuration commands

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ip rsvp

show tech-support ip rsvp [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ip

Configure IP features

rsvp

RSVP configuration commands

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ipqos

show tech-support ipqos [ server-only ] [ all ] [ snmp ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

server-only

(Optional) Dump the tech-support information only from IP QoS Manager server only

all

(Optional) Dump the tech-support information IP QoS Manager plus brief summary of system

snmp

(Optional) Dump the tech-support information only from IP QoS Manager server only (SNMP only)

Command Mode

- /exec

show tech-support ipv6

show tech-support ipv6 [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ipv6

Display IPV6 information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ipv6 mld

show tech-support ipv6 mld [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ipv6

Display IPv6 information

mld

Display Multicast Listener Discovery information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ipv6 pim

show tech-support ipv6 pim [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ipv6

Display IPv6 information

pim

PIM6 global configuration commands

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support isis

show tech-support isis [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

isis

IS-IS events

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support issu

show tech-support issu [ commands ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

issu

Gather detailed information for issu troubleshooting

commands

(Optional) Show commands executed as part of show tech-support issu command

Command Mode

- /exec

show tech-support l2

show tech-support l2

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

l2

Gather detailed information for layer 2 troubleshooting

Command Mode

- /exec

show tech-support l2fm clients

show tech-support l2fm clients [ module <module> ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

l2fm

l2fm debug info

clients

debug info of l2fm clients only running on linecard(mtm)

module

(Optional) Slot number

module

(Optional) Module Number

Command Mode

- /exec

show tech-support l2fm detail

show tech-support l2fm detail [ module <module> ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

l2fm

l2fm debug info

detail

All info related to l2fm

module

(Optional) Slot number

module

(Optional) Module Number

Command Mode

- /exec

show tech-support l2fm l2dbg

show tech-support l2fm l2dbg [ module <module> ]

Syntax Description

Syntax Description

show

show tech-support

tech-support

Gather information for trouble-shooting

l2fm

l2fm debug info

l2dbg

tech support capturing additional debug info for l2fm(l2dbg)

module

(Optional) Slot number

module

(Optional) Module Number

Command Mode

- /exec

show tech-support l2fm l2dbg

show tech-support l2fm l2dbg [ module <module> ]

Syntax Description

Syntax Description

show

show tech-support

tech-support

Gather information for trouble-shooting

l2fm

l2fm debug info

l2dbg

tech support capturing additional debug info for l2fm(l2dbg)

module

(Optional) Slot number

module

(Optional) Module Number

Command Mode

- /exec

show tech-support l2rib

show tech-support l2rib

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

l2rib

Display L2RIB information

Command Mode

- /exec

show tech-support l3vm

show tech-support l3vm [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

l3vm

Display VRF information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support l3vpn

show tech-support l3vpn [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

l3vpn

BGP l3vpn information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support lacp

show tech-support lacp [ all ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

lacp

Gather detailed information for LACP component

all

(Optional) Gather detailed information of LACP and related components

Command Mode

- /exec

show tech-support ldap

show tech-support ldap

Syntax Description

Syntax Description

show

show tech-support

tech-support

Gather information for troubleshooting

ldap

Display ldap information

Command Mode

- /exec

show tech-support license

show tech-support license

Syntax Description

Syntax Description

show

show commands

tech-support

Gather information for troubleshooting

license

Display licensing information

Command Mode

- /exec

show tech-support lim

show tech-support lim

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

lim

Gather detailed information for LIM troubleshooting

Command Mode

- /exec

show tech-support lisp

show tech-support lisp [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

lisp

LISP show commands

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support lldp

show tech-support lldp

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

lldp

Gather detailed information for LLDP troubleshooting

Command Mode

- /exec

show tech-support logging

show tech-support logging

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

logging

Show information on logging for technical support staff

Command Mode

- /exec

show tech-support m2rib

show tech-support m2rib

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

m2rib

Gather detailed information for M2RIB troubleshooting

Command Mode

- /exec

show tech-support macsec

show tech-support macsec

Syntax Description

Syntax Description

tech-support

Gather information for troubleshooting

macsec

Gather information for macsec troubleshooting

Command Mode

- /exec

show tech-support mmode

show tech-support mmode

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

mmode

Gather information for troubleshooting mmode

Command Mode

- /exec

show tech-support module

show tech-support module <module>

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

module

Gather info related to a module

module

Enter module number

Command Mode

- /exec

show tech-support module all

show tech-support module all

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

module

Gather info related to a module

all

Gather info related to all modules in the system

Command Mode

- /exec

show tech-support monitor

show tech-support monitor

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

monitor

Gather detailed information for monitor troubleshooting

Command Mode

- /exec

show tech-support monitor erspan

show tech-support monitor erspan

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

monitor

Gather detailed information for monitor troubleshooting

erspan

Gather detailed information for erspan session troubleshooting

Command Mode

- /exec

show tech-support monitorc-all

show tech-support monitorc-all

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

monitorc-all

Gather detailed information for LC MONITORC troubleshooting

Command Mode

- /exec

show tech-support mpls ldp

show tech-support mpls ldp [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

mpls

Display MPLS status and configuration

ldp

Display LDP configuration and status for troubleshooting

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support mpls manager

{ show tech-support mpls manager }

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

mpls

MPLS

manager

MPLS-Mgr

Command Mode

- /exec

show tech-support mpls static

show tech-support mpls static [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

mpls

Display MPLS status and configuration

static

Display STATIC configuration and status for troubleshooting

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support mpls strip

show tech-support mpls strip

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

mpls

MPLS

strip

Gather MPLS label strip troubleshooting info

Command Mode

- /exec

show tech-support mpls switching

show tech-support mpls switching

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather MPLS switching information

mpls

Display MPLS status and configuration

switching

Display the MPLS label switching database

Command Mode

- /exec

show tech-support mpls traffic-eng

show tech-support mpls traffic-eng [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

mpls

Display MPLS status and configuration

traffic-eng

Traffic engineering information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support mplsfwd

show tech-support mplsfwd [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

mplsfwd

Display MPLS forwarding information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support mvpn

show tech-support mvpn [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

mvpn

Display Multicast VPN information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support nat

show tech-support nat

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

nat

Gather information for troubleshooting NAT

Command Mode

- /exec

show tech-support nbm

show tech-support nbm

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble-shooting

nbm

Non Blocking Multicast

Command Mode

- /exec

show tech-support netflow

show tech-support netflow [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

netflow

Show NetFlow tech-support information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support netstack

show tech-support netstack

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

netstack

Gather information for NETSTACK troubleshooting

Command Mode

- /exec

show tech-support netstack detail

show tech-support netstack detail

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

netstack

Gather information for NETSTACK troubleshooting

detail

Gather detailed information for NETSTACK troubleshooting

Command Mode

- /exec

show tech-support ngoam

show tech-support ngoam

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble-shooting

ngoam

ngoam

Command Mode

- /exec

show tech-support npacl

show tech-support npacl [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

npacl

Display npacl information

brief

(Optional) Brief npacl information

Command Mode

- /exec

show tech-support ns

show tech-support ns

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ns

Gather detailed information for northstar asic

Command Mode

- /exec

show tech-support ntp

show tech-support ntp

Syntax Description

Syntax Description

show

show running system information

tech-support

Gather information for trouble shooting

ntp

Gather information for NTP trouble shooting

Command Mode

- /exec

show tech-support nve

show tech-support nve

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

nve

Display NVE information

Command Mode

- /exec

show tech-support nxsdk

show tech-support nxsdk

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

nxsdk

NXOS SDK

Command Mode

- /exec

show tech-support object-store user

show tech-support object-store user <username>

Syntax Description

Syntax Description

show

Show Object Store

tech-support

Gather information for troubleshooting

object-store

Gather information from object store for Controller troubleshooting

user

nxapi username

username

nxapi username

Command Mode

- /exec

show tech-support onep

show tech-support onep

Syntax Description

Syntax Description

show

Show running system information

tech-support

Diagnostic information for technical support

onep

One Platform

Command Mode

- /exec

show tech-support openflow

show tech-support openflow [ brief | detailed ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

openflow

Show tech support for OpenFlow

brief

(Optional) Brief information

detailed

(Optional) Detailed information

Command Mode

- /exec

show tech-support ospf

show tech-support ospf [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ospf

Display OSPF status and configuration

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support ospfv3

show tech-support ospfv3 [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ospfv3

Display OSPFv3 status and configuration

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support otv

show tech-support otv [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

otv

Display OTV information

brief

(Optional) Brief OTV information

Command Mode

- /exec

show tech-support otv isis

show tech-support otv isis [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

otv

IS-IS events

isis

IS-IS events

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support page

show tech-support page [ time-optimized ] [ forced ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

page

Page through the output

time-optimized

(Optional) Gather tech-support faster, requires more memory and disk space

forced

(Optional) Do not check for standby being present

Command Mode

- /exec

show tech-support patch

show tech-support patch

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

patch

Gather detailed information for patch troubleshooting

Command Mode

- /exec

show tech-support pbr

{ show tech-support pbr }

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

pbr

Display Policy Based Routing (PBR) information

Command Mode

- /exec

show tech-support pfstat

show tech-support pfstat

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

pfstat

Gather detailed information for pfstat troubleshooting

Command Mode

- /exec

show tech-support pixm-all

show tech-support pixm-all

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

pixm-all

Gather detailed information for PIXM troubleshooting

Command Mode

- /exec

show tech-support pixm

show tech-support pixm

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

pixm

Gather detailed information for vdc-local-PIXM troubleshooting

Command Mode

- /exec

show tech-support pixmc-all

show tech-support pixmc-all

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

pixmc-all

Gather detailed information for LC PIXMC troubleshooting

Command Mode

- /exec

show tech-support pktmgr

show tech-support pktmgr [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

pktmgr

Display Packet Manager information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support platform-sdk

show tech-support platform-sdk

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

platform-sdk

Gather detailed information for platform-sdk troubleshooting

Command Mode

- /exec

show tech-support platform

show tech-support platform

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

platform

Get platform related information

Command Mode

- /exec

show tech-support plb-services

show tech-support plb-services [ detail ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

plb-services

PLB Services

detail

(Optional) Show more details

Command Mode

- /exec

show tech-support plcmgr

show tech-support plcmgr [ detail ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

plcmgr

Policy Manager

detail

(Optional) Print more details (e.g. messages,etc)

Command Mode

- /exec

show tech-support pltfm-config

show tech-support pltfm-config

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

pltfm-config

Gather detailed information for pltfm-config troubleshooting

Command Mode

- /exec

show tech-support port-channel

show tech-support port-channel

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

port-channel

Gather detailed information for port channel troubleshooting

Command Mode

- /exec

show tech-support port-client-all

show tech-support port-client-all

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

port-client-all

Gather detailed information for LC port client troubleshooting

Command Mode

- /exec

show tech-support port-profile

show tech-support port-profile

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

port-profile

Gather information for troubleshooting port-profiles

Command Mode

- /exec

show tech-support port-security

show tech-support port-security

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

port-security

Port security related command

Command Mode

- /exec

show tech-support port

show tech-support port

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

port

Gather detailed information for port manager troubleshooting

Command Mode

- /exec

show tech-support private-vlan

show tech-support private-vlan

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

private-vlan

Gather detailed information for private-vlan troubleshooting

Command Mode

- /exec

show tech-support ptp

show tech-support ptp

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

ptp

Gather detailed information for PTP troubleshooting

Command Mode

- /exec

show tech-support radius

show tech-support radius

Syntax Description

Syntax Description

show

show tech-support

tech-support

Gather information for troubleshooting

radius

Display radius information

Command Mode

- /exec

show tech-support rip

show tech-support rip [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

rip

Display RIP routing protocol status

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support routing

show tech-support routing [ ip | ipv4 ] [ unicast ] [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

routing

Display routing information

ip

(Optional) Display IP information

ipv4

(Optional) Display IP information

unicast

(Optional) Display unicast routing information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support routing ipv6

show tech-support routing ipv6 [ unicast ] [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

routing

Display routing information

ipv6

Display IPv6 information

unicast

(Optional) Display unicast routing information

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support rpm

{ show tech-support rpm }

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

rpm

Display Route Policy Manager (RPM) information

Command Mode

- /exec

show tech-support satmgr

show tech-support satmgr

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

satmgr

Gather detailed information for satmgr troubleshooting

Command Mode

- /exec

show tech-support security

show tech-support security

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

security

show tech support information for security

Command Mode

- /exec

show tech-support services

show tech-support services [ detail ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

services

Services

detail

(Optional) Show more details

Command Mode

- /exec

show tech-support services

show tech-support services [ detail ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

services

Services

detail

(Optional) Show more details

Command Mode

- /exec

show tech-support session-mgr

show tech-support session-mgr

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

session-mgr

Gather information for troubleshooting session manager

Command Mode

- /exec

show tech-support sflow

show tech-support sflow

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

sflow

Gather detailed information for sflow feature

Command Mode

- /exec

show tech-support sksd

show tech-support sksd

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

sksd

show tech support information for sksd

Command Mode

- /exec

show tech-support sla responder

show tech-support sla responder [ brief | detail ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

sla

Service Level Agreement (SLA)

responder

Configure sla-responder tech support

brief

(Optional) Show less details

detail

(Optional) Show more details

Command Mode

- /exec

show tech-support sla sender

show tech-support sla sender [ brief | detail ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

sla

Service Level Agreement (SLA)

sender

Configure sla-sender tech support

brief

(Optional) Show less details

detail

(Optional) Show more details

Command Mode

- /exec

show tech-support smartc

show tech-support smartc [ detail ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

smartc

smartc channel services

detail

(Optional) Show more details

Command Mode

- /exec

show tech-support smm

show tech-support smm

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

smm

Shared memory

Command Mode

- /exec

show tech-support snmp

show tech-support snmp

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

snmp

Gather info related to snmp

Command Mode

- /exec

show tech-support sockets

show tech-support sockets [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

sockets

Display sockets status and configuration

brief

(Optional) Brief information

Command Mode

- /exec

show tech-support statsclient

show tech-support statsclient [ module <module> ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

statsclient

Gather statsclient tech-support

module

(Optional) Gather info related to one module

module

(Optional) Enter module number

Command Mode

- /exec

show tech-support stp

show tech-support stp

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

stp

Gather detailed information for STP troubleshooting

Command Mode

- /exec

show tech-support sup-filesys

show tech-support sup-filesys

Syntax Description

Syntax Description

show

Show running system informatiom

tech-support

Gather information for troubleshooting

sup-filesys

File-sys related issue

Command Mode

- /exec

show tech-support sysmgr

show tech-support sysmgr [ commands ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

sysmgr

Gather detailed information for sysmgr troubleshooting

commands

(Optional) Show commands executed as part of show tech-support sysmgr

Command Mode

- /exec

show tech-support tacacs

show tech-support tacacs +

Syntax Description

Syntax Description

show

show tech-support

tech-support

Gather information for troubleshooting

Command Mode

- /exec

show tech-support telemetry

show tech-support telemetry

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

telemetry

Gather information for telemetry troubleshooting

Command Mode

- /exec

show tech-support track

show tech-support track

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

track

Show track tech-support information

Command Mode

- /exec

show tech-support tunnel

show tech-support tunnel [ { commands | detail [ commands1 ] } ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

tunnel

Gather detailed information for tunnel troubleshooting

commands

(Optional) Lists commands under 'show tunnel tech-support' command

detail

(Optional) Gather detailed information for tunnel troubleshooting

commands1

(Optional) Lists commands under 'Show tech-support tunnel detail' commands

Command Mode

- /exec

show tech-support udld

show tech-support udld

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

udld

Gather detailed information for udld troubleshooting

Command Mode

- /exec

show tech-support usd-all

show tech-support usd-all

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

usd-all

Gather detailed information for LC USD troubleshooting

Command Mode

- /exec

show tech-support vdc

show tech-support vdc

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

vdc

Gather detailed information for VDC troubleshooting

Command Mode

- /exec

show tech-support virtual-service

show tech-support virtual-service

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

virtual-service

Gather information for virtualization services trouble shooting

Command Mode

- /exec

show tech-support vmtracker

show tech-support vmtracker

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

vmtracker

VMTRACKER commands

Command Mode

- /exec

show tech-support vpc

show tech-support vpc

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

vpc

Gather detailed information for VPC troubleshooting

Command Mode

- /exec

show tech-support vrrp

show tech-support vrrp

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

vrrp

Show information for vrrp technical support

Command Mode

- /exec

show tech-support vrrp brief

show tech-support vrrp brief

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

vrrp

Show information for vrrp technical support

brief

Show information for vrrp technical support in brief

Command Mode

- /exec

show tech-support vrrpv3

show tech-support vrrpv3 [ detail ]

Syntax Description

Syntax Description

vrrpv3

VRRPv3 configuration commands

show

Show running system information

tech-support

Gather information for trouble shooting

detail

(Optional) Detailed output

Command Mode

- /exec

show tech-support vshd

show tech-support vshd

Syntax Description

Syntax Description

show

Show running system information

tech-support

Show information for technical support

vshd

Show vshd information for technical support

Command Mode

- /exec

show tech-support vxlan-evpn

show tech-support vxlan-evpn

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

vxlan-evpn

VxLAN evpn feature

Command Mode

- /exec

show tech-support vxlan

show tech-support vxlan

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

vxlan

VxLAN feature

Command Mode

- /exec

show tech-support vxlan platform

show tech-support vxlan platform

Syntax Description

Syntax Description

show

Show tech-support for PD VxLAN component

tech-support

Gather information for troubleshooting

vxlan

VxLAN components

platform

VxLAN platform components

Command Mode

- /exec

show tech-support xbar

show tech-support xbar

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for trouble shooting

xbar

Show xbar tech-support information

Command Mode

- /exec

show tech-support xml

show tech-support xml

Syntax Description

Syntax Description

show

show running system information

tech-support

Gather information for trouble shooting

xml

Gather information for xml trouble shooting

Command Mode

- /exec

show tech-support xos

show tech-support xos [ brief ]

Syntax Description

Syntax Description

show

Show running system information

tech-support

Gather information for troubleshooting

xos

Cross-OS Library Information and Traces

brief

(Optional) Brief information

Command Mode

- /exec

show telemetry control database

show telemetry control { database [ subscriptions | destination-groups | destinations | sensor-paths | sensor-groups ] | stats }

Syntax Description

Syntax Description

show

Show running system information

telemetry

Show telemetry info

control

Show telemetry control

database

Show database

subscriptions

(Optional) Show subscriptions

destination-groups

(Optional) Show destination-groups

destinations

(Optional) Show destinations

sensor-paths

(Optional) Show sensor-paths

sensor-groups

(Optional) Show sensor-groups

stats

Show stats

Command Mode

- /exec

show telemetry data collector brief

show telemetry data collector { brief | details }

Syntax Description

Syntax Description

show

Show running system information

telemetry

Show telemetry info

data

Show telemetry data info

collector

Show telemetry data collector info

brief

Show component level data collection stats

details

Show path level data collection stats

Command Mode

- /exec

show telemetry event collector stats

show telemetry event collector { stats | errors }

Syntax Description

Syntax Description

show

Show running system information

telemetry

Show telemetry info

event

Show telemetry event info

collector

Show telemetry event collector info

stats

Show all tm stat info

errors

Show all tm error info

Command Mode

- /exec

show telemetry pipeline stats

show telemetry pipeline stats

Syntax Description

Syntax Description

show

Show running system information

telemetry

Show telemetry info

pipeline

Show telemetry pipeline info

stats

Show all telemetry pipeline stats

Command Mode

- /exec

show telemetry transport

show telemetry transport [ <session_id> [ { stats | errors } ] ]

Syntax Description

Syntax Description

show

Show running system information

telemetry

Show telemetry info

transport

Show telemetry event info

session_id

(Optional) Session id

stats

(Optional) Show all tm stat info

errors

(Optional) Show all tm error info

Command Mode

- /exec

show telnet server

show telnet server [ __readonly__ { operation_status <o_status> } ]

Syntax Description

Syntax Description

show

Show running system information

telnet

Show telnet server configuration

server

Show telnet server configuration

__readonly__

(Optional)

operation_status

(Optional) run-time information about telnet

o_status

(Optional) operational status of telnet server

Command Mode

- /exec

show terminal

show terminal

Syntax Description

Syntax Description

show

Show running system information

terminal

Display terminal configuration parameters

Command Mode

- /exec

show terminal internal info

show terminal internal info

Syntax Description

Syntax Description

show

Show running system information

terminal

Display terminal configuration parameters

internal

Display terminal internal information

info

Display terminal internal info

Command Mode

- /exec

show terminal output xml version

show terminal output xml version

Syntax Description

Syntax Description

show

Show running system information

terminal

Display

output

Display

xml

Display

version

Display

Command Mode

- /exec

show time-range

show time-range [ <name> ] [ __readonly__ TABLE_timerange <timerange_name> <active> [ TABLE_seqno <seqno> { { absolute [ <start_abs_h> <start_abs_m> <start_abs_s> <start_abs_d> <start_abs_mon> <start_abs_y> ] [ <end_abs_h> <end_abs_m> <end_abs_s> <end_abs_d> <end_abs_mon> <end_abs_y> ] } | { periodic { Monday | Tuesday | Wednesday | Thursday | Friday | Saturday | Sunday | daily | weekdays | weekend } + <start_per_h> <start_per_m> <start_per_s> [ <eday> ] <end_per_h> <end_per_m> <end_per_s> } | { <remark> } } ] ]

Syntax Description

Syntax Description

show

Show running system information

time-range

Define time range entries

name

(Optional) Time range name

__readonly__

(Optional)

TABLE_timerange

(Optional)

timerange_name

(Optional)

active

(Optional) active

TABLE_seqno

(Optional)

seqno

(Optional) Sequence number

absolute

(Optional)

periodic

(Optional)

remark

(Optional)

start_abs_h

(Optional)

start_abs_m

(Optional)

start_abs_s

(Optional)

start_abs_d

(Optional)

start_abs_mon

(Optional)

start_abs_y

(Optional)

end_abs_h

(Optional)

end_abs_m

(Optional)

end_abs_s

(Optional)

end_abs_d

(Optional)

end_abs_mon

(Optional)

end_abs_y

(Optional)

Monday

(Optional) Monday

Tuesday

(Optional) Tuesday

Wednesday

(Optional) Wednesday

Thursday

(Optional) Thursday

Friday

(Optional) Friday

Saturday

(Optional) Saturday

Sunday

(Optional) Sunday

daily

(Optional) Every day of the week

weekdays

(Optional) Monday thru Friday

weekend

(Optional) Saturday and Sunday

start_per_h

(Optional)

start_per_m

(Optional)

start_per_s

(Optional)

eday

(Optional) Day of the week

end_per_h

(Optional)

end_per_m

(Optional)

end_per_s

(Optional)

Command Mode

- /exec

show track

show track { [ <object-id> | interface | ip { route | sla } | ipv6 routev6 | list boolean and | list boolean or | list threshold weight | list threshold percentage ] } [ __readonly__ <show_track_start> { TABLE_track_detail <st_obj_id> <st_obj_type> <st_obj_instance> <st_obj_param> <st_obj_state> <st_obj_chg_cnt> <st_last_chg_time> <st_threshold_info> <st_track_list_obj> <st_obj_up_delay> <st_obj_down_delay> <st_obj_timer_value> <st_vrf> <st_ipsla_rcode> <st_ipsla_rtt> <show_track_clnt_hdr> <show_track_clnt_start> { TABLE_track_clnt_info <st_client_name> <st_client_iface> <st_client_group_id> <st_client_detail> } <show_track_clnt_end> <st_track_list_info> } <show_track_end> ]

Syntax Description

Syntax Description

show

Negate a command or set its defaults

track

Tracking information

object-id

(Optional) Tracked object

interface

(Optional) Interface objects

ip

(Optional) IPv4 Protocol objects

route

(Optional) route (ipv4) objects

sla

(Optional) Service Level Agreement objects

ipv6

(Optional) IPv6 Protocol objects

routev6

(Optional) route (ipv6) objects

list

(Optional) Tracklist objects

boolean

(Optional) Boolean Traclist

and

(Optional) AND boolean objects

or

(Optional) OR boolean objects

threshold

(Optional) Threshold parameters

weight

(Optional) Threshold weight

percentage

(Optional) Threshold percentage

__readonly__

(Optional) Read only

show_track_start

(Optional) Show track start

TABLE_track_detail

(Optional) Track table detail

st_obj_id

(Optional) Object id

st_obj_type

(Optional) Object Type

st_obj_instance

(Optional) Object instance

st_obj_param

(Optional) Object parameter

st_obj_state

(Optional) Object status

st_obj_chg_cnt

(Optional) Count of Object state changes

st_last_chg_time

(Optional) Timestamp of last change

st_threshold_info

(Optional) Threshold Parameters

st_track_list_obj

(Optional) Objects part of this list

show_track_clnt_hdr

(Optional) Tracked by:

show_track_clnt_start

(Optional) Show track client start

TABLE_track_clnt_info

(Optional) Track client info

st_client_name

(Optional) Tracking client name

st_client_iface

(Optional) Tracking client interface

st_client_group_id

(Optional) Client group id

st_client_detail

(Optional) Tracking client detail

show_track_clnt_end

(Optional) End of track client

st_track_list_info

(Optional) Track list info

st_obj_up_delay

(Optional) Delay up notification

st_obj_down_delay

(Optional) Delay down notification

st_obj_timer_value

(Optional) Current value of timer

st_vrf

(Optional) VRF

st_ipsla_rcode

(Optional) IP SLA Return Code

st_ipsla_rtt

(Optional) IP SLA RTT

show_track_end

(Optional) End of Track

Command Mode

- /exec

show track brief

show track { [ <object-id> | interface | ip { route | sla } | ipv6 routev6 | list boolean and | list boolean or | list threshold weight | list threshold percentage ] } brief [ __readonly__ { <show_track_brf_start> <show_track_brf_all_begin> { TABLE_track_brief <st_brf_obj_id> <st_brf_obj_type> <st_brf_obj_instance> <st_brf_obj_param> <st_brf_obj_state> <st_brf_last_chg_time> } <show_track_brf_end> } ]

Syntax Description

Syntax Description

show

Negate a command or set its defaults

track

Tracking information

object-id

(Optional) Tracked object

interface

(Optional) Interface objects

ip

(Optional) IPv4 Protocol objects

route

(Optional) route (ipv4) objects

sla

(Optional) Service Level Agreement objects

ipv6

(Optional) IPv6 Protocol objects

routev6

(Optional) route (ipv6) objects

list

(Optional) Tracklist objects

boolean

(Optional) Boolean Traclist

and

(Optional) AND boolean objects

or

(Optional) OR boolean objects

threshold

(Optional) Threshold parameters

weight

(Optional) Threshold weight

percentage

(Optional) Threshold percentage

brief

Brief output

__readonly__

(Optional) Read only

show_track_brf_start

(Optional) Show track brief start

show_track_brf_all_begin

(Optional) Start of all brief

TABLE_track_brief

(Optional) Track table brief

st_brf_obj_id

(Optional) Object id

st_brf_obj_type

(Optional) Object Type

st_brf_obj_instance

(Optional) Object instance

st_brf_obj_param

(Optional) Object parameter

st_brf_obj_state

(Optional) Object status

st_brf_last_chg_time

(Optional) Timestamp of last change

show_track_brf_end

(Optional) End of Group

Command Mode

- /exec

show track internal errors

show track internal [ event-history ] errors

Syntax Description

Syntax Description

show

Show running system information

track

Show track information

internal

Show internal track information

event-history

(Optional) Show various track event logs

errors

Show various track error logs

Command Mode

- /exec

show track internal info counters

show track internal info counters

Syntax Description

Syntax Description

show

Show running system information

track

Show track information

internal

Show internal track information

info

Show internal data structure information

counters

Show track counters information

Command Mode

- /exec

show track internal info global

show track internal info global

Syntax Description

Syntax Description

show

Show running system information

track

Show track information

internal

Show internal track information

info

Show internal data structure information

global

Display track global info

Command Mode

- /exec

show track internal info object

show track internal info object <object-id> [ up | down ]

Syntax Description

Syntax Description

show

Show running system information

track

Show track information

internal

Show internal track information

info

Show internal data structure information

object

Show internal information about track object

object-id

Enter object id

up

(Optional) Show up events

down

(Optional) Show down events

Command Mode

- /exec

show track internal mem-stats

show track internal mem-stats [ uuid <i0> ] [ track-only ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

track

Show track information

internal

Show internal track information

mem-stats

Show memory allocation statistics of track

uuid

(Optional) Show stats only for this uuid

i0

(Optional) Enter uuid

track-only

(Optional) Show stats of only track

detail

(Optional) Show detail memstats for track

Command Mode

- /exec

show track internal msgs

show track internal [ event-history ] msgs

Syntax Description

Syntax Description

show

Show running system information

track

Show track information

internal

Show internal track information

event-history

(Optional) Show various track event logs

msgs

Show various track message logs

Command Mode

- /exec

show ttag brief

show ttag brief [ __readonly__ { TABLE_ttag <ttag-ifindex> <state> } <ttag-end> ]

Syntax Description

Syntax Description

ttag

enable ingress packet with ttag on this interface

brief

ttag port in brief list

__readonly__

(Optional) Read Only

TABLE_ttag

(Optional) ttag table

ttag-ifindex

(Optional) ttag ifindex

ttag-end

(Optional) End of table

state

(Optional) BMC state

Command Mode

- /exec

show tunnel iftable

show tunnel iftable [ <ifindex-in> ] [ __readonly__ TABLE-tunnelIfTable <ifindex-out> <tunnelIfEncapsMethod> <tunnelIfHopLimit> <tunnelIfSecurity> <tunnelIfTOS> <tunnelIfFlowLabel> <tunnelIfAddressType> <tunnelIfLocalInetAddress> <tunnelIfRemoteInetAddress> <tunnelIfEncapsLimit> ]

Syntax Description

Syntax Description

show

Show running system information

tunnel

Show information about Tunnel

iftable

Show tunnel interface table

ifindex-in

(Optional) Tunnel ifindex

__readonly__

(Optional)

TABLE-tunnelIfTable

(Optional) Tunnel interface table

ifindex-out

(Optional) Tunnel ifindex

tunnelIfEncapsMethod

(Optional) Encapsulation Method

tunnelIfHopLimit

(Optional) Hop Limit

tunnelIfSecurity

(Optional) Security

tunnelIfTOS

(Optional) TOS

tunnelIfFlowLabel

(Optional) Flow Label

tunnelIfAddressType

(Optional) Address Type

tunnelIfLocalInetAddress

(Optional) Local IP Address

tunnelIfRemoteInetAddress

(Optional) Remote IP Address

tunnelIfEncapsLimit

(Optional) Encaps Limit

Command Mode

- /exec

show tunnel inetconfigtable

show tunnel inetconfigtable [ <tunnelInetConfigAddressType-in> [ [ <tunnelInetConfigLocalAddress-in> [ <tunnelInetConfigRemoteAddress-in> [ <tunnelInetConfigEncapsMethod-in> [ <tunnelInetConfigID-in> ] ] ] ] ] ] [ __readonly__ TABLE-tunnelInetConfigTable <tunnelInetConfigAddressType-out> <tunnelInetConfigLocalAddress-out> <tunnelInetConfigRemoteAddress-out> <tunnelInetConfigEncapsMethod-out> <tunnelInetConfigID-out> <tunnelInetConfigIfIndex> <tunnelInetConfigStatus> <tunnelInetConfigStorageType> ]

Syntax Description

Syntax Description

show

Show running system information

tunnel

Show information about Tunnel

inetconfigtable

Show inet config table

tunnelInetConfigAddressType-in

(Optional) Address Type

tunnelInetConfigLocalAddress-in

(Optional) Local IP Address

tunnelInetConfigRemoteAddress-in

(Optional) Remote IP Addess

tunnelInetConfigEncapsMethod-in

(Optional) Encapsulation Method

tunnelInetConfigID-in

(Optional) Configuration ID

__readonly__

(Optional)

TABLE-tunnelInetConfigTable

(Optional) Tunnel Inet Config Table

tunnelInetConfigAddressType-out

(Optional) Address Type

tunnelInetConfigLocalAddress-out

(Optional) Local IP Address

tunnelInetConfigRemoteAddress-out

(Optional) Remote IP Addess

tunnelInetConfigEncapsMethod-out

(Optional) Encapsulation Method

tunnelInetConfigID-out

(Optional) Configuration ID

tunnelInetConfigIfIndex

(Optional) If Index

tunnelInetConfigStatus

(Optional) Row Status

tunnelInetConfigStorageType

(Optional) Storage Type

Command Mode

- /exec

show tunnel internal database

show tunnel internal database { policy { subscriptions | sessions | instances | all | { vrf2pinst [ <vrf-name> | <vrf-known-name> ] } } | primary [ <if0> ] | reachability }

Syntax Description

Syntax Description

show

Show running system information

tunnel

Show information about Tunnel

internal

Show internal tunnel information

database

database

policy

policy database

subscriptions

show subscription database

sessions

show sessions database

instances

show policy instance database

all

show detail policy database

vrf2pinst

show vrf-name to pinst-node ID mapping

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

primary

show tunnel interface database

if0

(Optional) Enter tunnel number

reachability

Show tunnel reachability_db

Command Mode

- /exec

show tunnel internal database shared

show tunnel internal database shared

Syntax Description

Syntax Description

show

Show running system information

tunnel

Show information about Tunnel

internal

Show internal tunnel information

database

database

shared

shared database opened by tunnel manager

Command Mode

- /exec

show tunnel internal event-history debug

show tunnel internal event-history { { debug [ <if> ] } | global }

Syntax Description

Syntax Description

show

Show running system information

tunnel

Show information about Tunnel

internal

Show internal tunnel information

event-history

Show various event logs of Tunnels

debug

Show tunnel interface logs

if

(Optional) Enter tunnel number

global

Show tunnel global info

Command Mode

- /exec

show tunnel internal event-history errors

show tunnel internal event-history errors

Syntax Description

Syntax Description

show

Show running system information

tunnel

Show information about Tunnel

internal

Show internal tunnel information

event-history

Show various event logs of Tunnels

errors

Show error logs of Tunnel

Command Mode

- /exec

show tunnel internal event-history fsm-transition

show tunnel internal event-history fsm-transition [ <if0> ]

Syntax Description

Syntax Description

show

Show running system information

tunnel

Show information about Tunnel

internal

Show internal tunnel information

event-history

Show various event logs of Tunnels

fsm-transition

Show fsm-transition log

if0

(Optional) Enter tunnel number

Command Mode

- /exec

show tunnel internal event-history msgs

show tunnel internal event-history msgs

Syntax Description

Syntax Description

show

Show running system information

tunnel

Show information about Tunnel

internal

Show internal tunnel information

event-history

Show various event logs of Tunnels

msgs

Show various message logs of Tunnel

Command Mode

- /exec

show tunnel internal event-history ppf-fsm-transition

show tunnel internal event-history ppf-fsm-transition

Syntax Description

Syntax Description

show

Show running system information

tunnel

Show information about Tunnel

internal

Show internal tunnel information

event-history

Show various event logs of Tunnels

ppf-fsm-transition

Show ppf-fsm-transition log

Command Mode

- /exec

show tunnel internal implicit

show tunnel internal implicit [ otv | wccp ] { { tunnel_num <num> } | { if_index <index> } | brief | detail }

Syntax Description

Syntax Description

show

Show running system information

tunnel

Show information about Tunnel

internal

Show internal tunnel information

implicit

Show interface for Implicit Tunnels

otv

(Optional) Show interface for OTV Tunnels

wccp

(Optional) Show interface for WCCP Tunnels

tunnel_num

Tunnel number

num

Enter tunnel number

if_index

Tunnel if_index

index

Enter tunnel if_index

brief

Tunnel brief

detail

Tunnel detail

Command Mode

- /exec

show tunnel internal info global

show tunnel internal info global [ detail ]

Syntax Description

Syntax Description

show

Show running system information

tunnel

Show information about Tunnel

internal

Show internal tunnel information

info

Show internal data structure information

global

Show tunnel global information

detail

(Optional) Show tunnel global information in detail

Command Mode

- /exec

show tunnel internal mem-stats

show tunnel internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

tunnel

Show information about Tunnel

internal

Show internal tunnel information

mem-stats

Show memory allocation statistics of Tunnel

detail

(Optional) Show detail memstats

Command Mode

- /exec

Chapter 21. U Show Commands

- show udld

- show udld global

- show udld internal debug

- show udld internal event-history errors

- show udld internal event-history interface

- show udld internal event-history lock

- show udld internal event-history msgs

- show udld internal event-history pss

- show udld internal memory

- show udld neighbors

- show ulib process

- show user-account

- show username keypair

- show userpassphrase

- show users

show udld

show udld [ <if0> ] [ __readonly__ TABLE_interface <interface> <mib-port-status> <mib-oper-status> <mib-aggresive-mode> <admin-port-mode> <operational-port-mode> <current-bidirectional-state> <current-operational-state> <message-interval> <timeout-interval> <no-multiple-neighbor-detected> TABLE_entry <entry-number> <expiration-time> <device-id> <neighbor-state> <device-name> <port-id> <neighbor-echo-device-number> <neighbor-echo-device-name> <neighbor-echo-port-number> <neighbor-echo-port-id> <neighbor-message-interval> <neighbor-timeout-interval> <cdp-device-name> <pkt-xmt-rec-time> <pc-index> ]

Syntax Description

Syntax Description

show

Show running system information

udld

UDLD status and configuration on one or all interfaces

if0

(Optional) Enter an interface name if only one single interface status is desired

__readonly__

(Optional)

TABLE_interface

(Optional)

interface

(Optional) Interface ID

mib-port-status

(Optional) Port MIB enable status

mib-oper-status

(Optional) Port MIB Operational status

mib-aggresive-mode

(Optional) Port MIB aggresive mode

admin-port-mode

(Optional) Port enable administration configuration setting

operational-port-mode

(Optional) Port enable operational state

current-bidirectional-state

(Optional) Current bidirectional state

current-operational-state

(Optional) Current operational state

message-interval

(Optional) UDLD probe messsage interval

timeout-interval

(Optional) UDLD detection timeout interval

no-multiple-neighbor-detected

(Optional) No multiple neighbor detected

TABLE_entry

(Optional) Neighbor entry info

entry-number

(Optional) Neighbor entry number

expiration-time

(Optional) Expiration time

device-id

(Optional) Device ID

neighbor-state

(Optional) Current neighbor state

device-name

(Optional) Device name

port-id

(Optional) Port ID

neighbor-echo-device-number

(Optional) Echo device number

neighbor-echo-device-name

(Optional) Echo device name

neighbor-echo-port-number

(Optional) Echo port number

neighbor-echo-port-id

(Optional) Echo port ID

neighbor-message-interval

(Optional) UDLD probe messsage interval

neighbor-timeout-interval

(Optional) UDLD detection timeout interval

cdp-device-name

(Optional) CDP Device name

pkt-xmt-rec-time

(Optional) Last UDLD packet send/recv time

pc-index

(Optional) Port channel index

Command Mode

- /exec

show udld global

show udld global [ __readonly__ <udld-global-mode> <message-interval> ]

Syntax Description

Syntax Description

show

Show running system information

udld

UDLD protocol

global

UDLD global status and configuration on all interfaces

__readonly__

(Optional)

udld-global-mode

(Optional) UDLD global configuration setting

message-interval

(Optional) UDLD probe messsage interval

Command Mode

- /exec

show udld internal debug

show udld internal debug

Syntax Description

Syntax Description

show

Show running system information

udld

UDLD protocol

internal

Commands for internal use

debug

UDLD internal debug information

Command Mode

- /exec

show udld internal event-history errors

show udld internal event-history errors

Syntax Description

Syntax Description

show

Show running system information

udld

Show udld information

internal

Show udld service internal status

event-history

Show event logs of udld

errors

Show error logs of udld

Command Mode

- /exec

show udld internal event-history interface

show udld internal event-history interface <if0>

Syntax Description

Syntax Description

show

Show running system information

udld

Show udld information

internal

Show udld service internal status

event-history

Show event logs of udld

interface

Show interface event transition

if0

Enter interface name

Command Mode

- /exec

show udld internal event-history lock

show udld internal event-history lock

Syntax Description

Syntax Description

show

Show running system information

udld

Show udld information

internal

Show udld service internal status

event-history

Show event logs of udld

lock

Show lock logs of udld

Command Mode

- /exec

show udld internal event-history msgs

show udld internal event-history msgs

Syntax Description

Syntax Description

show

Show running system information

udld

Show udld information

internal

Show udld service internal status

event-history

Show event logs of udld

msgs

Show message logs of udld

Command Mode

- /exec

show udld internal event-history pss

show udld internal event-history pss

Syntax Description

Syntax Description

show

Show running system information

udld

Show udld information

internal

Show udld service internal status

event-history

Show event logs of udld

pss

Show pss2 event history of udld

Command Mode

- /exec

show udld internal memory

show udld internal memory [ detail ]

Syntax Description

Syntax Description

show

Show running system information

udld

UDLD protocol

internal

Commands for internal use

memory

UDLD internal memory status

detail

(Optional) Show detail memstats for UDLD

Command Mode

- /exec

show udld neighbors

show udld neighbors [ __readonly__ TABLE_entry <local-port-id> <neighbor-echo-device-name> <device-id> <neighbor-echo-port-id> <neighbor-state> ]

Syntax Description

Syntax Description

show

Show running system information

udld

UDLD protocol

neighbors

UDLD neighbor interfaces

__readonly__

(Optional)

TABLE_entry

(Optional)

local-port-id

(Optional) Local port ID

neighbor-echo-device-name

(Optional) Echo device name

device-id

(Optional) Device ID

neighbor-echo-port-id

(Optional) Echo port ID

neighbor-state

(Optional) Current neighbor state

Command Mode

- /exec

show ulib process

show ulib process

Syntax Description

Syntax Description

show

Show running system information

ulib

Display ULIB status and configuration

process

ULIB Process information

Command Mode

- /exec

show user-account

show user-account [ <s0> ] [ __readonly__ TABLE_template <usr_name> <expire_date> { TABLE_role <role> } [ <remote_login> ] [ <sshkey_info> ] { TABLE_keys <ssh_keys> } ]

Syntax Description

Syntax Description

show

Show running system information

TABLE_template

(Optional)

TABLE_role

(Optional)

TABLE_keys

(Optional)

__readonly__

(Optional)

usr_name

(Optional) Name of the user

expire_date

(Optional) Expiry date for this user account(in YYYY-MM-DD format)

role

(Optional) role/s which the user is to be assigned to

remote_login

(Optional) Remote account information for a remote user

sshkey_info

(Optional) SSH key information of user

ssh_keys

(Optional) SSH key pairs of the user

user-account

Show user information

s0

(Optional) User name

Command Mode

- /exec

show username keypair

show username <s0> keypair [ __readonly__ { TABLE_sessions <t_type> <t_time> <t_keys> <t_bitcount> <t_fingerprint> } ]

Syntax Description

Syntax Description

show

Show running system information

username

Show user information.

keypair

Show SSH keypairs

s0

user name

__readonly__

(Optional)

TABLE_sessions

(Optional) username keypair

t_type

(Optional) keys type

t_time

(Optional) timestamp

t_keys

(Optional) ssh key

t_bitcount

(Optional) bitcount

t_fingerprint

(Optional) fingerprint

Command Mode

- /exec

show userpassphrase

show userpassphrase { min-length | max-length | length } [ __readonly__ [ Minimum_length <min_length> ] [ Maximum_length <max_length> ] ]

Syntax Description

Syntax Description

show

Show running system information

userpassphrase

user passphrase

min-length

passphrase minimum length

max-length

passphrase maximum length

length

passphrase min and max length

__readonly__

(Optional)

Minimum_length

(Optional) minimum length of the passphrase

min_length

(Optional) Absolute value of the Minimum length

Maximum_length

(Optional) Maximum length of the passphrase

max_length

(Optional) Absolute value of max length

Command Mode

- /exec

show users

show users [ __readonly__ { TABLE_sessions <u_name> <t_terminal> <t_time> <t_idle> <p_pid> <c_comment> } ]

Syntax Description

Syntax Description

show

Show running system information

users

Show the current users logged in the system

__readonly__

(Optional)

TABLE_sessions

(Optional) users table

u_name

(Optional) user name

t_terminal

(Optional) terminal

t_time

(Optional) time

t_idle

(Optional) idle

p_pid

(Optional) pid

c_comment

(Optional) comment

Command Mode

- /exec

Chapter 22. V Show Commands

- show vdc

- show vdc current-vdc

- show vdc fcoe-vlan-range

- show vdc internal bitmaps

- show vdc internal create_possible

- show vdc internal errors

- show vdc internal event-history vdc_id

- show vdc internal mac_address_table

- show vdc internal mem-stats

- show vdc internal msgs

- show vdc internal pss

- show vdc resource

- show vdc resource

- show vdc resource template

- show version

- show version compatibility

- show version image

- show version internal build-identifier

- show version module

- show version module epld

- show virtual-service

- show virtual-service storage pool list

- show virtual-service tech-support

- show virtual-service utilization name

- show virtual-service version

- show vlan access-list

- show vlan access-map

- show vlan counters

- show vlan dot1Q tag native

- show vlan filter

- show vlan id counters

- show vlan id vn-segment

- show vlan mib private-vlan type

- show vlan private-vlan

- show vlan private-vlan interface host

- show vlan private-vlan interface mapping

- show vlan private-vlan interface mode

- show vlan private-vlan interface trunk

- show vlan private-vlan mapping

- show vlan private-vlan type

- show vmtracker

- show vmtracker certificate

- show vmtracker fabric auto-config

- show vmtracker status

- show vpc

- show vpc

- show vpc consistency-parameters

- show vpc consistency-parameters vlans

- show vpc internal peer-keepalive snmp parame-table domain-id

- show vpc internal peer-keepalive snmp status-table domain-id

- show vpc internal role snmp role-table domain-id

- show vpc internal statistics peer-keepalive snmp stats-table domain-id

- show vpc internal status snmp host-link-table domain-id vpc-id

- show vpc internal status snmp peer-link-table domain-id

- show vpc orphan-ports

- show vpc peer-keepalive

- show vpc role

- show vpc statistics peer-keepalive

- show vpc statistics vpc

- show vrf

- show vrf

- show vrf topology

- show vrrp

- show vrrp bfd-sessions

- show vrrp internal configuration event-history errors

- show vrrp internal configuration event-history msgs

- show vrrp internal debugs

- show vrrp internal engine event-history errors

- show vrrp internal engine event-history msgs

- show vrrp internal info

- show vrrp internal info global

- show vrrp internal mem-stats

- show vrrpv3

- show vrrpv3 internal debug

- show vrrpv3 internal event-history debugs

- show vrrpv3 internal event-history errors

- show vrrpv3 internal event-history msgs

- show vrrpv3 internal high-availability database

- show vrrpv3 internal mem-stats

- show vrrs client

- show vrrs pathway

- show vrrs pathway address

- show vrrs server

- show vrrs tag

- show vxlan

show vdc

{ show vdc [ <e-vdc2> ] [ feature-set | detail | membership [ all | status | module <module> ] | shared membership ] [ __readonly__ [ detail2 ] [ <swmode> ] { TABLE_vdc <vdc_id> <vdc_name> <state> <mac> <hap> <sw> <boot_order> [ <prio> <prio_per> ] [ <create_time> ] [ <reload_count> ] [ <restart_count> ] [ <restart_time> ] [ <restart_reason> ] <vtype> <lc-support> [ TABLE_fs <fs_id> <fs_name> ] [ TABLE_port <port-list> ] } ] }

Syntax Description

Syntax Description

show

Show Virtual Device Contexts

vdc

Show Virtual Device Contexts

e-vdc2

(Optional) Enter Virtual Device Context <vdc-id>

detail

(Optional) Show detailed vdc information

membership

(Optional) Show vdc interface membership information

shared

(Optional) Show the shared interfaces in a vdc

membership

(Optional) Show the shared interfaces in a vdc

module

(Optional) Show vdc interface membership information for a specific module only

module

(Optional) Show vdc interface membership information for a specific module only

status

(Optional) Show vdc related port-status

feature-set

(Optional) Show vdc feature-set information

all

(Optional) Show offline modules as well

__readonly__

(Optional) Read Only

detail2

(Optional)

swmode

(Optional)

TABLE_vdc

(Optional)

vdc_id

(Optional) vdc-id

TABLE_port

(Optional)

port-list

(Optional) port membership for VDC

vdc_name

(Optional) vdc-name

state

(Optional) state

mac

(Optional) mac address for VDC

hap

(Optional) hap policy

sw

(Optional) sw policy

vtype

(Optional)

lc-support

(Optional)

create_time

(Optional)

reload_count

(Optional)

restart_count

(Optional)

restart_time

(Optional)

restart_reason

(Optional)

TABLE_fs

(Optional)

fs_id

(Optional) fs id

fs_name

(Optional)

boot_order

(Optional)

prio

(Optional)

prio_per

(Optional)

Command Mode

- /exec

show vdc current-vdc

show vdc current-vdc [ __readonly__ <mode> <name> ]

Syntax Description

Syntax Description

show

Show Virtual Device Contexts

vdc

Show Virtual Device Contexts

current-vdc

Show which vdc you are currently in

__readonly__

(Optional) Read Only

mode

(Optional) cli mode

name

(Optional) vdc name

Command Mode

- /exec

show vdc fcoe-vlan-range

show vdc fcoe-vlan-range [ __readonly__ <fcoe-vdc> [ <fcoe-vlans> ] [ <sharing-vdcs> ] ]

Syntax Description

Syntax Description

show

Show Virtual Device Contexts

vdc

Show Virtual Device Contexts

fcoe-vlan-range

vlans reserved for FCoE

__readonly__

(Optional) Read Only

fcoe-vdc

(Optional)

sharing-vdcs

(Optional)

fcoe-vlans

(Optional)

Command Mode

- /exec

show vdc internal bitmaps

show vdc internal bitmaps

Syntax Description

Syntax Description

show

Show Virtual Device Contexts

vdc

Show Virtual Device Contexts

internal

Show Internal info for vdc_mgr

bitmaps

Kernel bitmap tables

Command Mode

- /exec

show vdc internal create_possible

show vdc internal create_possible

Syntax Description

Syntax Description

show

Show running system information

vdc

Show Virtual Device Contexts

internal

Show Internal info for vdc_mgr

create_possible

Is creation possible

Command Mode

- /exec

show vdc internal errors

show vdc internal [ event-history ] errors

Syntax Description

Syntax Description

show

Show running system information

vdc

Show information about vdc_mgr

internal

Show internal vdc_mgr information

event-history

(Optional) Show various event logs of vdc_mgr

errors

Show error logs of vdc_mgr

Command Mode

- /exec

show vdc internal event-history vdc_id

show vdc internal event-history vdc_id <new_id>

Syntax Description

Syntax Description

show

Show running system information

vdc

Show Virtual Device Contexts

internal

Show internal vdc_mgr information

event-history

Show various event logs of vdc_mgr

vdc_id

Enter Virtual Device Context <vdc-id>

new_id

Enter vdc id

Command Mode

- /exec

show vdc internal mac_address_table

show vdc internal mac_address_table [ __readonly__ <mac> ]

Syntax Description

Syntax Description

show

Show Virtual Device Contexts

vdc

Show Virtual Device Contexts

internal

Show Internal info for vdc_mgr

mac_address_table

Table of mac addresses

__readonly__

(Optional) Read Only

mac

(Optional) mac address for VDC

Command Mode

- /exec

show vdc internal mem-stats

show vdc internal mem-stats [ detail ]

Syntax Description

Syntax Description

show

Show running system information

vdc

Show information about vdc_mgr

internal

Show internal vdc_mgr information

mem-stats

Show memory allocation statistics of vdc_mgr

detail

(Optional) Show detail memstats for F_Port Server

Command Mode

- /exec

show vdc internal msgs

show vdc internal [ event-history ] msgs

Syntax Description

Syntax Description

show

Show running system information

vdc

Show information about vdc_mgr

internal

Show internal vdc_mgr information

event-history

(Optional) Show various event logs of vdc_mgr

msgs

Show various message logs of vdc_mgr

Command Mode

- /exec

show vdc internal pss

show vdc internal { { pss [ { <e-vdc2> | interface [ <interface-name> ] } ] } | port-hash }

Syntax Description

Syntax Description

show

Show running system information

vdc

Show Virtual Device Contexts

internal

Show Internal info for vdc_mgr

pss

Show Internal info pss for vdc_mgr

e-vdc2

(Optional) Enter Virtual Device Context <vdc-id>

interface

(Optional) Show Internal info for vdc_mgr

interface-name

(Optional) Show Internal info for vdc_mgr

port-hash

vdc_mgr port hash table

Command Mode

- /exec

show vdc resource

show vdc resource [ <res-mgr-res-known-name> ] [ detail | hidden-too | with-flags ] + [ __readonly__ { TABLE_resource <resource_name> <total_used> <total_unused> <total_free> <total_avail> <total> [ TABLE_vdc_resource_across_vdcs <vdc_name> <min> <max> <used> <unused> <free> ] } ]

Syntax Description

Syntax Description

show

Show running system information

vdc

Show Virtual Device Contexts

resource

Show resource configuration across VDCs

res-mgr-res-known-name

(Optional) Resource name

detail

(Optional) Show detail resource configuration

hidden-too

(Optional) Also show hidden resources

with-flags

(Optional) Also show resource flags

__readonly__

(Optional) Read Only

TABLE_resource

(Optional)

resource_name

(Optional) Resource Name

total_used

(Optional) Resource current usage for all VDC

total_unused

(Optional) Resources currently reserved but not used across all VDC

total_free

(Optional) Resource current free for all VDC

total_avail

(Optional) Resource current available across all VDC

total

(Optional) Resources grand total

TABLE_vdc_resource_across_vdcs

(Optional)

vdc_name

(Optional) VDC name

min

(Optional) Resource min configuration

max

(Optional) Resource max configuration

used

(Optional) Resource current usage for this VDC

unused

(Optional) Resource reserved for this VDC but currently not used

free

(Optional) Resource current free for this VDC

Command Mode

- /exec

show vdc resource

show vdc <id> resource [ <res-mgr-res-known-name> ] [ __readonly__ { TABLE_vdc_resource_single_vdc <res_name> <min> <max> <used> <unused> <free> } ]

Syntax Description

Syntax Description

show

Show running system information

vdc

Show Virtual Device Contexts

id

Enter Virtual Device Context <vdc-id>

resource

Show resource configuration for VDC

res-mgr-res-known-name

(Optional) Resource name

__readonly__

(Optional) Read Only

res_name

(Optional) Resource Name

min

(Optional) Resource min configuration

max

(Optional) Resource max configuration

used

(Optional) Resource current usage for this VDC

unused

(Optional) Resource reserved for this VDC but currently not used

free

(Optional) Resource current free for this VDC

TABLE_vdc_resource_single_vdc

(Optional)

Command Mode

- /exec

show vdc resource template

show vdc resource template [ <res-mgr-template-known-name-all> ] [ __readonly__ TABLE_template <template_name> { TABLE_resource <resource_name> <min> <max> } ]

Syntax Description

Syntax Description

show

Show running system information

vdc

Show Virtual Device Contexts

resource

Show resource configuration for VDC

template

Resource template configuration

res-mgr-template-known-name-all

(Optional) Resource template name

__readonly__

(Optional) Read Only

TABLE_template

(Optional)

template_name

(Optional) Resource Template Name

TABLE_resource

(Optional)

resource_name

(Optional) Resource Name

min

(Optional) Resource min configuration

max

(Optional) Resource max configuration

Command Mode

- /exec

show version

show version [ __readonly__ <header_str> <bios_ver_str> [ <loader_ver_str> ] <kickstart_ver_str> [ <sys_ver_str> ] <bios_cmpl_time> <kick_file_name> <kick_cmpl_time> <kick_tmstmp> [ <isan_file_name> ] [ <isan_cmpl_time> ] [ <isan_tmstmp> ] [ <boot_lxc_mode> ] <chassis_id> <module_id> <cpu_name> <memory> <mem_type> <proc_board_id> <host_name> <bootflash_size> [ <slot0_size> ] <kern_uptm_days> <kern_uptm_hrs> <kern_uptm_mins> <kern_uptm_secs> [ <rr_usecs> ] [ <rr_ctime> ] <rr_reason> <rr_sys_ver> <rr_service> [ TABLE_smu_list <install_smu_id> + ] [ TABLE_package_list <package_id> ] <manufacturer> ]

Syntax Description

Syntax Description

show

version

Show the software version

__readonly__

(Optional)

header_str

(Optional)

bios_ver_str

(Optional)

loader_ver_str

(Optional)

kickstart_ver_str

(Optional)

sys_ver_str

(Optional)

bios_cmpl_time

(Optional)

kick_file_name

(Optional)

kick_cmpl_time

(Optional)

kick_tmstmp

(Optional)

isan_file_name

(Optional)

isan_cmpl_time

(Optional)

isan_tmstmp

(Optional)

boot_lxc_mode

(Optional)

chassis_id

(Optional)

module_id

(Optional)

cpu_name

(Optional)

memory

(Optional)

mem_type

(Optional)

proc_board_id

(Optional)

host_name

(Optional)

bootflash_size

(Optional)

slot0_size

(Optional)

kern_uptm_days

(Optional)

kern_uptm_hrs

(Optional)

kern_uptm_mins

(Optional)

kern_uptm_secs

(Optional)

rr_usecs

(Optional)

rr_ctime

(Optional)

rr_reason

(Optional)

rr_sys_ver

(Optional)

rr_service

(Optional)

TABLE_smu_list

(Optional)

install_smu_id

(Optional)

TABLE_package_list

(Optional)

package_id

(Optional) Package name

manufacturer

(Optional)

Command Mode

- /exec

show version compatibility

show version compatibility <uri0>

Syntax Description

Syntax Description

show

Show running system information

version

Show the software version

compatibility

Show the software compatibility matrix with given image

uri0

Enter URI

Command Mode

- /exec

show version image

show version image <uri0>

Syntax Description

Syntax Description

show

Show running system information

version

Show the software version

image

Show the software version of a given image

uri0

Enter URI

Command Mode

- /exec

show version internal build-identifier

show version internal build-identifier

Syntax Description

Syntax Description

show

Show running system information

version

Show the software version

internal

internal commands

build-identifier

Show the build id of currently running software versions

Command Mode

- /exec

show version module

show version module <module> [ __readonly__ { TABLE_version <slot> <type> <sw> <interim> <bios> } ]

Syntax Description

Syntax Description

show

Show running system information

version

Show the software version

module

Show the software version of a Module

module

Enter module number

__readonly__

(Optional)

TABLE_version

(Optional) Show version info

slot

(Optional) Slot

type

(Optional) image type

sw

(Optional) SW version

interim

(Optional) SW interim version

bios

(Optional) BIOS version

Command Mode

- /exec

show version module epld

show version module <module> epld

Syntax Description

Syntax Description

show

Show running system information

version

Show the software version

module

Show the software version of a Module

module

Enter module number

epld

Show a module's current EPLD versions

Command Mode

- /exec

show virtual-service

show virtual-service [ { list } | { global } | { detail [ name <virt_serv_name> ] } | { core [ name <virt_serv_name_core> ] } ] [ __readonly__ [ <infrastructure_major_version> <infrastructure_minor_version> <total_virtual_services_installed> <total_virtual_services_activated> <maximum_vcpus_per_virtual_service> <machine_types_supported> <machine_types_disabled> TABLE_resource_limits <media_name> <quota> <committed> <available> ] [ TABLE_list <name> <status> <package_name> ] [ TABLE_detail <name> <package_name> <application_name> <application_version> <application_description> <key_type> <signing_method> <licensing_name> <licensing_version> <ova_path> <state> <disk_reservation> <memory_reservation> <cpu_reservation> TABLE_attached_devices <type> <name> <alias> ] [ TABLE_core <name> <name_core> ] ]

Syntax Description

Syntax Description

show

Show running system information

virtual-service

Display virtualization service information

global

(Optional) Virtual service global information

list

(Optional) List virtual services

detail

(Optional) Detailed information

core

(Optional) Core information

name

(Optional) Information for a specific virtual service

virt_serv_name

(Optional) Name of a virtual service

virt_serv_name_core

(Optional) Name of a virtual service

__readonly__

(Optional) Read Only

infrastructure_major_version

(Optional) Infrastructure major version

infrastructure_minor_version

(Optional) Infrastructure minor version

total_virtual_services_installed

(Optional) Total virtual services installed

total_virtual_services_activated

(Optional) Total virtual services activated

maximum_vcpus_per_virtual_service

(Optional) Maximum VCPUs per virtual service

machine_types_supported

(Optional) Machine types supported

machine_types_disabled

(Optional) Machine types disabled

TABLE_resource_limits

(Optional) Virtual service global resource limits

media_name

(Optional) Resource name

quota

(Optional) Resource Virtualization quota

committed

(Optional) Resource Virtualization committed

available

(Optional) Resource Virtualization available

TABLE_list

(Optional) Virtual service list table

name

(Optional) Virtual service name

status

(Optional) Virtual service status

package_name

(Optional) Virtual service package name

TABLE_detail

(Optional) Virtual service detail table

name

(Optional) Virtual service name

package_name

(Optional) Virtual service package name

application_name

(Optional) Name of the application

application_version

(Optional) Version of the application

application_description

(Optional) Description of the application

key_type

(Optional) Virtual service key type

signing_method

(Optional) Method used to sign the package

licensing_name

(Optional) Name of the license

licensing_version

(Optional) Version of the license

ova_path

(Optional) Virtual service OVA path

state

(Optional) Virtual service state

disk_reservation

(Optional) Virtual service disk reservation

memory_reservation

(Optional) Virtual service memory reservation

cpu_reservation

(Optional) Virtual service CPU reservation

TABLE_attached_devices

(Optional) Attached devices table

type

(Optional) Type of the attached device

name

(Optional) Name of the attached device

alias

(Optional) Alias for the attached device

TABLE_core

(Optional) Virtual service core table

name

(Optional) Virtual service name

name_core

(Optional) Name of core

Command Mode

- /exec

show virtual-service storage pool list

show virtual-service storage pool list [ __readonly__ [ TABLE_storage <pool_name> <pool_type> <pool_path> ] ]

Syntax Description

Syntax Description

show

Show running system information

virtual-service

Display virtualization service storage pool information

storage

Storage information about virtual service

pool

Storage pool information about virtual service

list

List storage pool for virtual service

__readonly__

(Optional) Read Only

TABLE_storage

(Optional) Virtual service storage pool list table

pool_name

(Optional) Virtual service storage pool name

pool_type

(Optional) Virtual service storage pool type

pool_path

(Optional) Virtual service storage pool path

Command Mode

- /exec

show virtual-service tech-support

show virtual-service tech-support

Syntax Description

Syntax Description

show

Show running system information

virtual-service

Gather information for virtualization services trouble shooting

tech-support

Gather information for trouble shooting

Command Mode

- /exec

show virtual-service utilization name

show virtual-service utilization name <virt_serv_name> [ __readonly__ [ TABLE_storage <name> <alias> <rd_bytes> <wr_bytes> <rd_requests> <wr_requests> <errors> <capacity> <used> <available> <usage> ] [ TABLE_network <name> <alias> <rx_packets> <tx_packets> <rx_bytes> <tx_bytes> <rx_drops> <tx_drops> <rx_errors> <tx_errors> ] [ TABLE_memory <allocation> <used> ] [ TABLE_cpu <request> <actual> <state> ] ]

Syntax Description

Syntax Description

show

Show running system information

virtual-service

Display virtualization service utilization information

utilization

Utilization information about virtual service

name

Utilization of a virtual service

virt_serv_name

Name of a virtual service

__readonly__

(Optional) Read Only

TABLE_storage

(Optional) Virtual service storage utilization

name

(Optional) storage device name

alias

(Optional) storage device alias

rd_bytes

(Optional) Read Bytes

wr_bytes

(Optional) Write Bytes

rd_requests

(Optional) Read requests

wr_requests

(Optional) Write requests

errors

(Optional) errors

capacity

(Optional) Capacity 1k blocks

used

(Optional) Used 1k blocks

available

(Optional) Available 1k blocks

usage

(Optional) Usage

TABLE_network

(Optional) Virtual service network utilization

name

(Optional) network device name

alias

(Optional) network device alias

rx_packets

(Optional) Received packets

tx_packets

(Optional) Transmitted packets

rx_bytes

(Optional) Received bytes

tx_bytes

(Optional) Transmitted bytes

rx_drops

(Optional) Received drops

tx_drops

(Optional) Transmitted drops

rx_errors

(Optional) Received errors

tx_errors

(Optional) Trnasmitted errors

TABLE_memory

(Optional) Virtual service memory utilization

allocation

(Optional) Memory allocation

used

(Optional) Memory used

TABLE_cpu

(Optional) Virtual service cpu utilization

request

(Optional) Requested Application Utilization

actual

(Optional) Actual Application Utilization

state

(Optional) CPU state

Command Mode

- /exec

show virtual-service version

show virtual-service version { { installed } | { name <virt_serv_name> installed } } [ __readonly__ <virt_service_name> <application_name> <application_version> ]

Syntax Description

Syntax Description

show

Show running system information

virtual-service

Display virtualization service version information

version

Version information about virtual service

installed

Installed version

name

Version of a virtual service

virt_serv_name

Name of a virtual service

__readonly__

(Optional) Read Only

virt_service_name

(Optional) Virtual service name

application_name

(Optional) Application name

application_version

(Optional) Application version

Command Mode

- /exec

show vlan access-list

show vlan access-list <name> [ <inp_seqno> ] [ __readonly__ TABLE_vacl <vacl_name> [ <vacl_seqno> ] [ TABLE_list <ip_ipv6_mac> <acl_name> [ TABLE_seqno <seqno> { <permitdeny> [ <proto_str> | <proto> | <ip> | <ipv6> ] { <src_any> | <src_ip_prefix> | <src_ip_addr> <src_ip_mask> | <src_ipv6_prefix> | <src_ipv6_addr> <src_ipv6_mask> | <mac_src> <mac_src_wild> | <src_addrgrp> } [ <src_port_op> [ <src_port1_str> ] { <src_port1_num> } [ <src_port2_str> | <src_port2_num> ] | <src_portgrp> ] { <dest_any> | <dest_ip_prefix> | <dest_ip_addr> <dest_ip_mask> | <dest_ipv6_prefix> | <dest_ipv6_addr> <dest_ipv6_mask> | <mac_dest> <mac_dest_wild> | <dest_addrgrp> } [ <dest_port_op> [ <dest_port1_str> ] { <dest_port1_num> } [ <dest_port2_str> | <dest_port2_num> ] | <dest_portgrp> ] [ { <icmp_type> [ <icmp_code> ] | <icmp_str> } | { <icmpv6_type> [ <icmpv6_code> ] | <icmpv6_str> } ] [ <igmp_type> | <igmp_type_str> ] [ [ <precedence> | <precedence_str> ] [ <tos> | <tos_str> ] | [ <dscp> | <dscp_str> ] | [ <ttl> ] ] [ <log> ] [ <udfs> ] [ <capture_session> ] [ <fragments> ] [ <plen_op> <plen1> [ <plen2> ] ] [ <urg> ] [ <ack> ] [ <psh> ] [ <rst> ] [ <syn> ] [ <fin> ] [ <established> ] [ <http-method> | <http_opt_str> ] [ <tcp-option-length> ] [ <tcp-flags-mask> ] [ <flow_label> ] [ <timerange> ] [ <eth_proto> | <eth_proto_str> ] [ <vlan> ] [ <cos> ] [ <match_count> ] | [ <nve_vni> ] | <remark> } ] [ <action> <actionid> ] ] ]

Syntax Description

Syntax Description

show

Show running system information

vlan

Vlan commands

access-list

Vlan access list

name

List name

inp_seqno

(Optional) Sequence number

vacl_name

(Optional) List name

__readonly__

(Optional)

vacl_seqno

(Optional) Sequence number

TABLE_vacl

(Optional)

TABLE_list

(Optional)

ip_ipv6_mac

(Optional) IP/iIPV6/MAC

acl_name

(Optional) Access list name

seqno

(Optional) Sequence number

permitdeny

(Optional) Permit/deny

proto

(Optional) A protocol number

TABLE_seqno

(Optional)

proto_str

(Optional) Protocol name

ip

(Optional) IP

ipv6

(Optional) IPV6

src_any

(Optional) SRCAny

dest_any

(Optional) DESTAny

src_ip_prefix

(Optional) Source IP prefix

src_ip_addr

(Optional) Source IP address

src_ip_mask

(Optional) Source IP mask

mac_src

(Optional) Source MAC address

mac_src_wild

(Optional) Source MAC mask

dest_ip_prefix

(Optional) Destination IP prefix

dest_ip_addr

(Optional) Destination IP address

dest_ip_mask

(Optional) Destination IP mask

mac_dest

(Optional) Destination MAC address

mac_dest_wild

(Optional) Destination MAC mask

src_port_op

(Optional) Source Port operator

dest_port_op

(Optional) Destination Port operator

src_port1_str

(Optional) Source port name

src_port1_num

(Optional) Source port number

src_port2_str

(Optional) Source port name

src_port2_num

(Optional) Source port number

dest_port1_str

(Optional) Destination port name

dest_port1_num

(Optional) Destination port number

dest_port2_str

(Optional) Destination port name

dest_port2_num

(Optional) Destination port number

icmp_type

(Optional) ICMP type

icmp_code

(Optional) ICMP code

icmp_str

(Optional) ICMP message

icmpv6_type

(Optional) ICMP type

icmpv6_code

(Optional) ICMP code

icmpv6_str

(Optional) ICMP message

igmp_type

(Optional) IGMP type

igmp_type_str

(Optional) IGMP type String

precedence

(Optional) precedence

precedence_str

(Optional) precedence string

tos

(Optional) tos

tos_str

(Optional) tos string

dscp

(Optional) dscp

dscp_str

(Optional) dscp string

udfs

(Optional) udfs string

ttl

(Optional) ttl

capture_session

(Optional) capture session

log

(Optional) Log

fragments

(Optional) Fragments

urg

(Optional) URG

ack

(Optional) ACK

psh

(Optional) PSH

rst

(Optional) RST

syn

(Optional) SYN

fin

(Optional) FIN

established

(Optional) ESTABLISHED

http-method

(Optional) http-method

http_opt_str

(Optional) http_option string

tcp-option-length

(Optional) TCP Option size

tcp-flags-mask

(Optional) TCP Flags mask

flow_label

(Optional) IPv6 flow label

timerange

(Optional) Time-range

eth_proto

(Optional) MAC protocol number

eth_proto_str

(Optional) MAC protocol name

vlan

(Optional) VLAN number

cos

(Optional) CoS value

match_count

(Optional) Number of packets matching the ACL

nve_vni

(Optional) nve vni

remark

(Optional) Remark String

src_addrgrp

(Optional) Source address group

dest_addrgrp

(Optional) Destination address group

src_portgrp

(Optional) Source port group

dest_portgrp

(Optional) Destination port group

plen_op

(Optional) Source Port operator

plen1

(Optional) Packet length minimum

plen2

(Optional) packet length maximum

action

(Optional) Action

actionid

(Optional) redirect: Ethernet1/1,port-channel1 set-erspan-dscp: <1-63> set-erspan-gre-proto: <1-65535>

Command Mode

- /exec

show vlan access-map

show vlan access-map [ <name> ] [ __readonly__ [ TABLE_vacl <vacl_name> [ TABLE_seqno [ <seqno> ] [ <ip_ipv6_mac> { <match_name> } + [ <action_drop> ] [ <action_log> ] [ <action_fwd> ] [ <action_capture> ] [ <action_redirect> <intf> ] ] [ <statistics> ] ] ] ]

Syntax Description

Syntax Description

show

Show running system information

vlan

Vlan commands

access-map

List VLAN access maps

name

(Optional) List name

vacl_name

(Optional) List name

__readonly__

(Optional)

seqno

(Optional) Sequence number

TABLE_vacl

(Optional)

TABLE_seqno

(Optional)

ip_ipv6_mac

(Optional) IP/iIPV6/MAC

match_name

(Optional) Access list name

action_drop

(Optional) DROP

action_log

(Optional) LOG

action_fwd

(Optional) FWD

action_capture

(Optional) CAPTURE

action_redirect

(Optional) REDIRECT

intf

(Optional) Interface traffic is redirected to

statistics

(Optional) STATISTICS

Command Mode

- /exec

show vlan counters

show vlan counters [ __readonly__ { TABLE_vlancounters <vlanshowbr-vlanid> [ <l2_ing_ucast_b> ] [ <l2_ing_ucast_p> ] [ <l2_ing_mcast_b> ] [ <l2_ing_mcast_p> ] [ <l2_ing_bcast_b> ] [ <l2_ing_bcast_p> ] [ <l2_egr_ucast_b> ] [ <l2_egr_ucast_p> ] [ <l3_ucast_rcv_b> ] [ <l3_ucast_rcv_p> ] [ <total_rcv_b> ] [ <total_rcv_p> ] [ <total_sent_b> ] [ <total_sent_p> ] } ]

Syntax Description

Syntax Description

show

Show running system information

vlan

Vlan commands

counters

display counters

__readonly__

(Optional) Read Only

TABLE_vlancounters

(Optional) vlan counters table format

vlanshowbr-vlanid

(Optional) VLAN brief VLAN ID

l2_ing_ucast_b

(Optional) L2 Ingress unicast octets

l2_ing_ucast_p

(Optional) L2 Ingress unicast packets

l2_ing_mcast_b

(Optional) L2 Ingress multicast octets

l2_ing_mcast_p

(Optional) L2 Ingress multicast packets

l2_ing_bcast_b

(Optional) L2 Ingress broadcast octets

l2_ing_bcast_p

(Optional) L2 Ingress broadcast packets

l2_egr_ucast_b

(Optional) L2 Egress unicast octets

l2_egr_ucast_p

(Optional) L2 Egress unicast packets

l3_ucast_rcv_b

(Optional) L3 unicast octets in

l3_ucast_rcv_p

(Optional) L3 unicast packets in

total_rcv_b

(Optional) Total octets in

total_rcv_p

(Optional) Total packets in

total_sent_b

(Optional) Total octets out

total_sent_p

(Optional) Total packets out

Command Mode

- /exec

show vlan dot1Q tag native

show vlan dot1Q tag native [ __readonly__ <tag_native_mode> ]

Syntax Description

Syntax Description

show

Show running system information

vlan

VTP VLAN status

dot1Q

Display dot1q parameters

tag

Display tag parameters

native

Display native vlan tagging

__readonly__

(Optional) Read Only

tag_native_mode

(Optional) Native vlan tagging mode

Command Mode

- /exec

show vlan filter

show vlan filter [ access-map <name> | vlan <vlan> ] [ __readonly__ TABLE_vlan_filter <name> <configured_vlans> ]

Syntax Description

Syntax Description

show

Show running system information

vlan

Vlan commands

filter

Information about VLAN filters

access-map

(Optional) Show the VLANs where an access-map is applied

name

(Optional) List name

vlan

(Optional) Show the access-map applied to a VLAN

vlan

(Optional) VLAN number

__readonly__

(Optional)

TABLE_vlan_filter

(Optional)

configured_vlans

(Optional) VLAN numbers

Command Mode

- /exec

show vlan id counters

show vlan id <vlan-id> counters [ __readonly__ { TABLE_vlancounters <vlanshowbr-vlanid> [ <l2_ing_ucast_b> ] [ <l2_ing_ucast_p> ] [ <l2_ing_mcast_b> ] [ <l2_ing_mcast_p> ] [ <l2_ing_bcast_b> ] [ <l2_ing_bcast_p> ] [ <l2_egr_ucast_b> ] [ <l2_egr_ucast_p> ] [ <total_rcv_b> ] [ <total_rcv_p> ] [ <total_sent_b> ] [ <total_sent_p> ] } ]

Syntax Description

Syntax Description

show

Show running system information

vlan

Vlan commands

id

VLAN status by VLAN id

counters

display counters

vlan-id

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

__readonly__

(Optional) Read Only

TABLE_vlancounters

(Optional) vlan counters table format

vlanshowbr-vlanid

(Optional) VLAN brief VLAN ID

l2_ing_ucast_b

(Optional) L2 Ingress unicast octets

l2_ing_ucast_p

(Optional) L2 Ingress unicast packets

l2_ing_mcast_b

(Optional) L2 Ingress multicast octets

l2_ing_mcast_p

(Optional) L2 Ingress multicast packets

l2_ing_bcast_b

(Optional) L2 Ingress broadcast octets

l2_ing_bcast_p

(Optional) L2 Ingress broadcast packets

l2_egr_ucast_b

(Optional) L2 Egress unicast octets

l2_egr_ucast_p

(Optional) L2 Egress unicast packets

total_rcv_b

(Optional) Total octets in

total_rcv_p

(Optional) Total packets in

total_sent_b

(Optional) Total octets out

total_sent_p

(Optional) Total packets out

Command Mode

- /exec

show vlan id vn-segment

show vlan id <vlan-id> vn-segment [ __readonly__ <vlanshowinfo-segid-hdr> { TABLE_seginfoid <vlanshowinfo-seg-vlanid> <vlanshowinfo-segment-id> } <show-end> [ <true-end> ] ]

Syntax Description

Syntax Description

show

Show running system information

vlan

VLAN status

id

VLAN status by VLAN id

vn-segment

Show vn-segment mapping

vlan-id

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

__readonly__

(Optional) Read Only

TABLE_seginfoid

(Optional) Segment id information table format

vlanshowinfo-segid-hdr

(Optional) Vlan info segment id header

vlanshowinfo-seg-vlanid

(Optional) Vlan info VLAN ID

vlanshowinfo-segment-id

(Optional) Vlan info SEGMENT ID

show-end

(Optional) Show vlan end marker

true-end

(Optional) Show vlan end marker

Command Mode

- /exec

show vlan mib private-vlan type

show vlan [ id <vlan-id> ] mib private-vlan type [ __readonly__ <start> <vlan> <pvlan-type> <primary> ]

Syntax Description

Syntax Description

show

Show running system information

vlan

VLAN status

id

(Optional) VLAN status by VLAN id

vlan-id

(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

private-vlan

Private VLAN information

type

Private VLAN type information

mib

mib

__readonly__

(Optional) Read Only

start

(Optional) Start

vlan

(Optional) vlan

pvlan-type

(Optional) PVLAN Type

primary

(Optional) associated to primary

Command Mode

- /exec

show vlan private-vlan

show vlan [ id <vlan-id> ] private-vlan [ __readonly__ [ { TABLE_pvlan_primary <vlan-key> [ <primary> ] [ <secondary> ] <pvlan-type> [ <ports> + ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

vlan

VLAN status

id

(Optional) VLAN status by VLAN id

vlan-id

(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

private-vlan

Private VLAN information

__readonly__

(Optional) Read Only

TABLE_pvlan_primary

(Optional) Pvlan primary vlan table

vlan-key

(Optional) Vlan key

primary

(Optional) Primary VLAN

secondary

(Optional) Secondary VLAN

pvlan-type

(Optional) PVLAN Type

ports

(Optional) Port list

Command Mode

- /exec

show vlan private-vlan interface host

show vlan private-vlan interface [ <if> ] host [ next <data> ] [ __readonly__ <start> <interface-id> <secondary-vlan> ]

Syntax Description

Syntax Description

show

Show running system information

vlan

VLAN status

private-vlan

Private VLAN information

interface

Show interface status and information

if

(Optional) Interface id

host

private-vlan host

next

(Optional) next-entry

data

(Optional) ignore junk value

__readonly__

(Optional) Read Only

start

(Optional) Start

interface-id

(Optional) Interface

secondary-vlan

(Optional) Secondary Vlan

Command Mode

- /exec

show vlan private-vlan interface mapping

show vlan private-vlan interface [ <if> ] mapping [ __readonly__ <start> <interface-id> <multi-primary> <secondary-vlan> <two-way> ]

Syntax Description

Syntax Description

show

Show running system information

vlan

VLAN status

private-vlan

Private VLAN information

interface

Show interface status and information

if

(Optional) Interface id

mapping

private-vlan mapping

__readonly__

(Optional) Read Only

start

(Optional) Start

interface-id

(Optional) Interface

multi-primary

(Optional) multiple primay capable

secondary-vlan

(Optional) seconadry vlans bitmap

two-way

(Optional) multiple primay capable

Command Mode

- /exec

show vlan private-vlan interface mode

show vlan private-vlan interface [ <if> ] mode [ next <data> ] [ __readonly__ <start> <interface-id> <port-mode> ]

Syntax Description

Syntax Description

show

Show running system information

vlan

VLAN status

private-vlan

Private VLAN information

interface

Show interface status and information

if

(Optional) Interface id

mode

private-vlan port mode

next

(Optional) next-entry

data

(Optional) ignore junk value

__readonly__

(Optional) Read Only

start

(Optional) Start

interface-id

(Optional) Interface

port-mode

(Optional) Port mode

Command Mode

- /exec

show vlan private-vlan interface trunk

show vlan private-vlan interface [ <if> ] trunk [ __readonly__ <start> <interface-id> <dynamic-state> <encap-type> <native-vlan> <secondary-vlans> <normal-vlans> <dynamic-status> <encap-oper-type> ]

Syntax Description

Syntax Description

show

Show running system information

vlan

VLAN status

private-vlan

Private VLAN information

interface

Show interface status and information

if

(Optional) Interface id

trunk

pvlan trunk

__readonly__

(Optional) Read Only

start

(Optional) Start

interface-id

(Optional) Interface

dynamic-state

(Optional) dynamic state

encap-type

(Optional) encapsulation type

native-vlan

(Optional) native vlan

secondary-vlans

(Optional) secondary vlans

normal-vlans

(Optional) normal vlans

dynamic-status

(Optional) dynamic status

encap-oper-type

(Optional) encap oper type

Command Mode

- /exec

show vlan private-vlan mapping

show vlan [ id <vlan-id> ] private-vlan mapping [ next <data> ] [ __readonly__ <start> <vlan-id> <primary> ]

Syntax Description

Syntax Description

show

Show running system information

vlan

VLAN status

id

(Optional) VLAN status by VLAN id

vlan-id

(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

private-vlan

Private VLAN information

mapping

private-vlan mapping

next

(Optional) next-entry

data

(Optional) ignore junk value

__readonly__

(Optional) Read Only

start

(Optional) Start

vlan-id

(Optional) secondary

primary

(Optional) primary-vlan

Command Mode

- /exec

show vlan private-vlan type

show vlan [ id <vlan-id> ] private-vlan type [ __readonly__ [ { TABLE_pvlantype <vlan-num> <pvlan-type> } ] ]

Syntax Description

Syntax Description

show

Show running system information

vlan

VLAN status

id

(Optional) VLAN status by VLAN id

vlan-id

(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

private-vlan

Private VLAN information

type

Private VLAN type information

__readonly__

(Optional) Read Only

TABLE_pvlantype

(Optional) Pvlan type table

vlan-num

(Optional) vlan

pvlan-type

(Optional) PVLAN Type

Command Mode

- /exec

show vmtracker

show vmtracker [ connection <conn_name> ] { { info { { [ interface <intf_id> ] { summary | detail | host | vm | port-group } } | { vxlan-segment | vxlan-vms } } } | event-history }

Syntax Description

Syntax Description

show

Show running system information

vmtracker

Show vmtracker info

connection

(Optional) Show vmtracker configured connections

conn_name

(Optional) Show vmtracker Connection name

info

Display vmtracker information

interface

(Optional) Display vmtracker interface information

intf_id

(Optional) Interface name to display

summary

Display a summary of vmtracker information

detail

Display vmtracker information details

host

Display vmtracker host information

vm

Display vmtracker related Virtual Machine information

port-group

Display vmtracker related port-group information

vxlan-segment

Print all segment info

vxlan-vms

Print all vm info

event-history

Display vmtracker related event-history

Command Mode

- /exec

show vmtracker certificate

show vmtracker certificate

Syntax Description

Syntax Description

show

Show running system information

vmtracker

VMTRACKER commands

certificate

Show the default certificate used

Command Mode

- /exec

show vmtracker fabric auto-config

show vmtracker fabric auto-config [ interface <intf_id> ] [ vlan <vlan_id> ] [ status { success | pending | failure | skipped } ]

Syntax Description

Syntax Description

show

Show running system information

vmtracker

VMTRACKER commands

fabric

VM Tracker Fabric paramters

auto-config

VM Tracker Fabric AutoConfiguration

interface

(Optional) Display vmtracker interface information

intf_id

(Optional) Interface name to display

vlan

(Optional) vlan to display

vlan_id

(Optional) VLAN ID 1-4094 or range(s) like: 1-5, 10 or 2-5,7-19

status

(Optional) Auto-config status

success

(Optional) Success

pending

(Optional) Pending

failure

(Optional) Failure

skipped

(Optional) Skipped

Command Mode

- /exec

show vmtracker status

show vmtracker [ connection <conn_name> ] status [ __readonly__ { TABLE_connection <name> <host_or_ip> <conn_status> } ]

Syntax Description

Syntax Description

__readonly__

(Optional)

TABLE_connection

(Optional)

name

(Optional)

host_or_ip

(Optional)

conn_status

(Optional)

show

Show running system information

vmtracker

Show vmtracker info

connection

(Optional) Show vmtracker configured connections

conn_name

(Optional) Show vmtracker Connection name

status

Show vmtracker connection status

Command Mode

- /exec

show vpc

show vpc [ brief ] [ __readonly__ <vpc-domain-id> [ <vpc-l2mp-switch-id> ] <vpc-peer-status> <vpc-peer-status-reason> <vpc-peer-keepalive-status> [ <vpc-peer-l2mp-status> ] <vpc-peer-consistency> { [ <vpc-peer-consistency-reason> ] [ <vpc-per-vlan-peer-consistency> ] <vpc-peer-consistency-status> } <vpc-type-2-consistency> { [ <vpc-type-2-consistency-reason> ] <vpc-type-2-consistency-status> } <vpc-role> <num-of-vpcs> [ <track-obj> ] [ <peer-gateway> ] [ <peer-gateway-excluded-vlans> ] <dual-active-excluded-vlans> <vpc-graceful-consistency-check-status> [ <vpc-auto-recovery-status> ] [ <vpc-delay-restore-status> ] [ <vpc-delay-restore-svi-status> ] [ <vpc-delay-peer-link-status> ] <operational-l3-peer> [ <vpc-scale-high-status> ] [ <fp-enhanced-load-balancing> ] [ <vpc-per-vlan-peer-consistency> ] <vpc-peer-link-hdr> [ { TABLE_peerlink <peer-link-id> <peerlink-ifindex> <peer-link-port-state> <peer-up-vlan-bitset> } ] <vpc-end> <vpc-hdr> [ <vpc-is-es> ] [ <vpc-not-es> ] [ { TABLE_vpc <vpc-id> <vpc-ifindex> <vpc-port-state> <phy-port-if-removed><vpc-thru-peerlink> <vpc-consistency> { [ <vpc-consistency-reason> ] [ <vpc-consistency-status> ] } <up-vlan-bitset> <es-attr> } ] <vpc-end> ]

Syntax Description

Syntax Description

vpc

Virtual Port Channel configuration

brief

(Optional) Brief display of vPC status

__readonly__

(Optional) Read Only

TABLE_peerlink

(Optional) vPC peerlink table

TABLE_vpc

(Optional) vPC table

vpc-domain-id

(Optional) vPC domain id

vpc-l2mp-switch-id

(Optional) vPC+ switch ID

vpc-peer-status

(Optional) vPC peer status

vpc-peer-status-reason

(Optional) vPC peer status reason

vpc-peer-keepalive-status

(Optional) vpc peer keepalive status

vpc-peer-l2mp-status

(Optional) vPC fabricpath status

vpc-role

(Optional) vPC role

peer-gateway

(Optional) Peer gateway status

peer-gateway-excluded-vlans

(Optional) peer-gateway excluded VLANs

dual-active-excluded-vlans

(Optional) dual-active excluded VLANs

fp-enhanced-load-balancing

(Optional) Fabricpath enhanced load balancing status

num-of-vpcs

(Optional) Number of vPCs configured

track-obj

(Optional) Track object for vPC

vpc-graceful-consistency-check-status

(Optional) vPC graceful consistency check

vpc-consistency

(Optional) vPC global configuration consistency

vpc-consistency-reason

(Optional) vPC consistency reason

vpc-consistency-status

(Optional) vPC consistency reason

vpc-peer-consistency

(Optional) vPC global configuration consistency

vpc-peer-consistency-reason

(Optional) vPC consistency reason

vpc-peer-consistency-status

(Optional) vPC consistency reason

vpc-per-vlan-peer-consistency

(Optional) vPC per-vlan global configuration consistency

vpc-type-2-consistency

(Optional) vPC type-2 configuration consistency status

vpc-type-2-consistency-reason

(Optional) vPC type-2 configuration consistency reason

vpc-type-2-consistency-status

(Optional) vPC type-2 configuration consistency status

operational-l3-peer

(Optional) Operational Layer 3 peer status

vpc-scale-high-status

(Optional) vPC scale high status

vpc-hdr

(Optional) Start of vPC table

vpc-is-es

(Optional) Flag to indicate vPC+ complex

vpc-not-es

(Optional) Flag to indicate vPC complex

vpc-peer-link-hdr

(Optional) Start of vPC peer-link table

vpc-port-state

(Optional) vPC port state

vpc-end

(Optional) End of table

vpc-id

(Optional) vPC id

vpc-ifindex

(Optional) vPC ifindex

peer-link-id

(Optional) peer link id

peerlink-ifindex

(Optional) peer link ifindex

peer-link-port-state

(Optional) peer-link port state

peer-up-vlan-bitset

(Optional) peer link UP VLAN bitset

up-vlan-bitset

(Optional) vPC UP VLAN bitset

es-attr

(Optional) vPC+ attributes

vpc-auto-recovery-status

(Optional) Auto-recovery status

vpc-delay-restore-status

(Optional) Delay-resotre status

vpc-delay-restore-svi-status

(Optional) Dealy-restore-svi status

vpc-delay-peer-link-status

(Optional) Delay-peer-link status

Command Mode

- /exec

show vpc

show vpc { <vpc-number> | brief vpc <vpc-number> } [ __readonly__ [ <vpc-hdr> ] [ <vpc-is-es> ] [ <vpc-not-es> ] [ TABLE_vpc <vpc-id> <vpc-ifindex> <vpc-port-state> <vpc-thru-peerlink> <vpc-consistency> { [ <vpc-consistency-reason> ] [ <vpc-consistency-status> ] } <up-vlan-bitset> <es-attr> ] <vpc-end> ]

Syntax Description

Syntax Description

vpc

Virtual Port Channel configuration

brief

Brief display of vPC status

vpc-number

Enter a Virtual Port Channel number

__readonly__

(Optional) Read Only

vpc-hdr

(Optional) Start of vPC table

vpc-is-es

(Optional) Flag to indicate vPC+ complex

vpc-not-es

(Optional) Flag to indicate vPC complex

TABLE_vpc

(Optional) vPC table

vpc-id

(Optional) vPC id

vpc-ifindex

(Optional) vPC ifindex

vpc-port-state

(Optional) vPC port state

vpc-thru-peerlink

(Optional) vPC Routing through peerlink

vpc-consistency

(Optional) vPC global configuration consistency

vpc-consistency-reason

(Optional) vPC consistency reason

vpc-consistency-status

(Optional) vPC consistency reason

up-vlan-bitset

(Optional) vPC UP VLAN bitset

es-attr

(Optional) vPC+ attributes

vpc-end

(Optional) End of table

Command Mode

- /exec

show vpc consistency-parameters

show vpc consistency-parameters { global | interface <if> | vpc <vpc-num> } [ __readonly__ TABLE_vpc_consistency <vpc-param-name> <vpc-param-type> <vpc-param-local-val> <vpc-param-peer-val> ]

Syntax Description

Syntax Description

vpc

Virtual Port Channel configuration

consistency-parameters

Show vPC Consistency Parameters

global

Global Parameters

if

vpc-num

Enter a Virtual Port Channel number

__readonly__

(Optional) Read Only

TABLE_vpc_consistency

(Optional) vPC table

vpc-param-name

(Optional)

vpc-param-type

(Optional)

vpc-param-local-val

(Optional)

vpc-param-peer-val

(Optional)

Command Mode

- /exec

show vpc consistency-parameters vlans

show vpc consistency-parameters vlans [ __readonly__ TABLE_vpc_consistency <vpc-param-name> <vpc-param-type> [ <reason_code> ] [ <syserr> ] <vpc-pass-vlans> [ <reason_code> ] ]

Syntax Description

Syntax Description

vpc

Virtual Port Channel configuration

consistency-parameters

Show vPC Consistency Parameters

vlans

vlans

__readonly__

(Optional) Read Only

TABLE_vpc_consistency

(Optional) vPC table

vpc-param-name

(Optional)

vpc-param-type

(Optional)

vpc-pass-vlans

(Optional)

syserr

(Optional) vPC consistency reason

reason_code

(Optional) vPC consistency reason

Command Mode

- /exec

show vpc internal peer-keepalive snmp parame-table domain-id

show vpc internal peer-keepalive snmp parame-table domain-id <id> [ __readonly__ TABLE-cVpcPeerKeepAliveConfigTable <cVpcPeerKeepAliveConfigDomainID> <cVpcPeerKeepAliveDestAddrType> <cVpcPeerKeepAliveDestAddr> <cVpcPeerKeepAliveSourceAddrType> <cVpcPeerKeepAliveSourceAddr> <cVpcPeerKeepAliveUdpPort> <cVpcPeerKeepAliveInterval> <cVpcPeerKeepAliveTimeout> <cVpcPeerKeepAliveHoldTimeout> <cVpcPeerKeepAliveTos> <cVpcPeerKeepAlivePrecedence> <cVpcPeerKeepAliveTosByte> <cVpcPeerKeepAliveVrfName> ]

Syntax Description

Syntax Description

vpc

Virtual Port Channel configuration

internal

Commands for internal use

peer-keepalive

vPC peer keep-alive

snmp

vPC keep-alive snmp information

parame-table

Peer keep-alive parameters table

domain-id

vPC domain ID

id

vPC domain ID value

__readonly__

(Optional) Read Only

TABLE-cVpcPeerKeepAliveConfigTable

(Optional) Keep-alive xml parameters table

cVpcPeerKeepAliveConfigDomainID

(Optional)

cVpcPeerKeepAliveDestAddrType

(Optional)

cVpcPeerKeepAliveDestAddr

(Optional)

cVpcPeerKeepAliveSourceAddrType

(Optional)

cVpcPeerKeepAliveSourceAddr

(Optional)

cVpcPeerKeepAliveUdpPort

(Optional)

cVpcPeerKeepAliveInterval

(Optional)

cVpcPeerKeepAliveTimeout

(Optional)

cVpcPeerKeepAliveHoldTimeout

(Optional)

cVpcPeerKeepAliveTos

(Optional)

cVpcPeerKeepAlivePrecedence

(Optional)

cVpcPeerKeepAliveTosByte

(Optional)

cVpcPeerKeepAliveVrfName

(Optional)

Command Mode

- /exec

show vpc internal peer-keepalive snmp status-table domain-id

show vpc internal peer-keepalive snmp status-table domain-id <id> [ __readonly__ TABLE-cVpcPeerKeepAliveTable <cVpcPeerKeepAliveDomainID> <cVpcPeerKeepAliveStatus> <cVpcPeerKeepAliveTime> <cVpcPeerKeepAliveMsgSendStatus> <cVpcPeerKeepAliveMsgLastSendTime> <cVpcPeerKeepAliveMsgSendInterface> <cVpcPeerKeepAliveMsgRcvrStatus> <cVpcPeerKeepAliveMsgLastReceiveTime> <cVpcPeerKeepAliveMsgReceiveInterface> ]

Syntax Description

Syntax Description

vpc

Virtual Port Channel configuration

internal

Commands for internal use

peer-keepalive

vPC peer keep-alive

snmp

vPC keep-alive snmp information

status-table

Peer keep-alive status table

domain-id

vPC domain ID

id

vPC domain ID value

__readonly__

(Optional) Read Only

TABLE-cVpcPeerKeepAliveTable

(Optional) Keep-alive xml status table

cVpcPeerKeepAliveDomainID

(Optional)

cVpcPeerKeepAliveStatus

(Optional)

cVpcPeerKeepAliveTime

(Optional)

cVpcPeerKeepAliveMsgSendStatus

(Optional)

cVpcPeerKeepAliveMsgLastSendTime

(Optional)

cVpcPeerKeepAliveMsgSendInterface

(Optional)

cVpcPeerKeepAliveMsgRcvrStatus

(Optional)

cVpcPeerKeepAliveMsgLastReceiveTime

(Optional)

cVpcPeerKeepAliveMsgReceiveInterface

(Optional)

Command Mode

- /exec

show vpc internal role snmp role-table domain-id

show vpc internal role snmp role-table domain-id <id> [ __readonly__ TABLE-cVpcRoleTable <cVpcRoleDomainID> <cVpcRoleStatus> <cVpcDualActiveDetectionStatus> <cVpcSystemAdminMacAddress> <cVpcSystemOperMacAddress> <cVpcLocalOperMacAddress> <cVpcSystemAdminPriority> <cVpcSystemOperPriority> <cVpcLocalRoleAdminPriority> <cVpcLocalRoleOperPriority> ]

Syntax Description

Syntax Description

vpc

Virtual Port Channel configuration

internal

Commands for internal use

role

vPC peer role

snmp

vPC role snmp information

role-table

vPC role parameters table

domain-id

vPC domain ID

id

vPC domain ID value

__readonly__

(Optional) Read Only

TABLE-cVpcRoleTable

(Optional) vPC role xml table

cVpcRoleDomainID

(Optional)

cVpcRoleStatus

(Optional)

cVpcDualActiveDetectionStatus

(Optional)

cVpcSystemAdminMacAddress

(Optional)

cVpcSystemOperMacAddress

(Optional)

cVpcLocalOperMacAddress

(Optional)

cVpcSystemAdminPriority

(Optional)

cVpcSystemOperPriority

(Optional)

cVpcLocalRoleAdminPriority

(Optional)

cVpcLocalRoleOperPriority

(Optional)

Command Mode

- /exec

show vpc internal statistics peer-keepalive snmp stats-table domain-id

show vpc internal statistics peer-keepalive snmp stats-table domain-id <id> [ __readonly__ TABLE-cVpcStatsPeerKeepAliveTable <cVpcStatsPeerKeepAliveDomainID> <cVpcStatsPeerKeepAliveMsgsSent> <cVpcStatsPeerKeepAliveMsgsRcved> <cVpcStatsPeerKeepAliveAvgInterval> <cVpcStatsPeerStatusChangeCount> ]

Syntax Description

Syntax Description

vpc

Virtual Port Channel configuration

internal

Commands for internal use

statistics

vPC statistics

peer-keepalive

vPC peer keep-alive

snmp

vPC role snmp information

stats-table

vPC statistics peer-keepalive table

domain-id

vPC domain ID

id

vPC domain ID value

__readonly__

(Optional) Read Only

TABLE-cVpcStatsPeerKeepAliveTable

(Optional) vPC statistics xml table

cVpcStatsPeerKeepAliveDomainID

(Optional)

cVpcStatsPeerKeepAliveMsgsSent

(Optional)

cVpcStatsPeerKeepAliveMsgsRcved

(Optional)

cVpcStatsPeerKeepAliveAvgInterval

(Optional)

cVpcStatsPeerStatusChangeCount

(Optional)

Command Mode

- /exec

show vpc internal status snmp host-link-table domain-id vpc-id

show vpc internal status snmp host-link-table domain-id <did> vpc-id <vid> [ __readonly__ TABLE-cVpcStatusHostLinkTable <cVpcStatusHostLinkDomainID> <cVpcStatusHostLinkVpcID> <cVpcStatusHostLinkIfIndex> <cVpcStatusHostLinkStatus> <cVpcStatusHostLinkConsistencyStatus> <cVpcStatusHostLinkConsistencyDetail> ]

Syntax Description

Syntax Description

vpc

Virtual Port Channel configuration

internal

Commands for internal use

status

vPC brief status information

snmp

vPC brief host-link information

host-link-table

Host-link summary table

domain-id

vPC domain ID

did

vPC domain ID value

vpc-id

vPC link ID

vid

vPC link ID value

__readonly__

(Optional) Read Only

TABLE-cVpcStatusHostLinkTable

(Optional) Host-link xml status table

cVpcStatusHostLinkDomainID

(Optional)

cVpcStatusHostLinkVpcID

(Optional)

cVpcStatusHostLinkIfIndex

(Optional)

cVpcStatusHostLinkStatus

(Optional)

cVpcStatusHostLinkConsistencyStatus

(Optional)

cVpcStatusHostLinkConsistencyDetail

(Optional)

Command Mode

- /exec

show vpc internal status snmp peer-link-table domain-id

show vpc internal status snmp peer-link-table domain-id <did> [ __readonly__ TABLE-cVpcStatusPeerLinkTable <cVpcStatusPeerLinkDomainID> <cVpcStatusPeerLinkIfIndex> ]

Syntax Description

Syntax Description

vpc

Virtual Port Channel configuration

internal

Commands for internal use

status

vPC brief status information

snmp

vPC brief peer-link information

peer-link-table

Peer-link summary table

domain-id

vPC domain ID

did

vPC domain ID value

__readonly__

(Optional) Read Only

TABLE-cVpcStatusPeerLinkTable

(Optional) Peer-link xml status table

cVpcStatusPeerLinkDomainID

(Optional)

cVpcStatusPeerLinkIfIndex

(Optional)

Command Mode

- /exec

show vpc orphan-ports

show vpc orphan-ports [ __readonly__ TABLE_orphan_ports <vpc-vlan> <vpc-orphan-ports> ]

Syntax Description

Syntax Description

vpc

Virtual Port Channel configuration

orphan-ports

Show ports that are not part of vPC but have common VLANs

__readonly__

(Optional) Read Only

TABLE_orphan_ports

(Optional) vPC orphan ports table

vpc-vlan

(Optional)

vpc-orphan-ports

(Optional)

Command Mode

- /exec

show vpc peer-keepalive

show vpc peer-keepalive [ __readonly__ <vpc-peer-keepalive-status> <vpc-keepalive-dest> <vpc-keepalive-send-interface> <vpc-keepalive-receive-interface> <vpc-keepalive-send-tstamp> <vpc-keepalive-receive-tstamp> <vpc-peer-keepalive-up-time> <vpc-keepalive-send-status> <vpc-keepalive-receive-status> <vpc-keepalive-lastupdate> [ <vpc-keepalive-dest> ] <vpc-keepalive-interval> <vpc-keepalive-timeout> <vpc-keepalive-hold-timeout> <vpc-keepalive-vrf> <vpc-keepalive-udp-port> <vpc-keepalive-tos> ]

Syntax Description

Syntax Description

vpc

Virtual Port Channel configuration

peer-keepalive

vPC keepalive status

__readonly__

(Optional) Read Only

vpc-peer-keepalive-status

(Optional) vpc peer keepalive status

vpc-keepalive-dest

(Optional) vPC keepalive destination ip address

vpc-keepalive-send-status

(Optional) vPC keepalive send status

vpc-keepalive-receive-status

(Optional) vPC keepalive receive status

vpc-peer-keepalive-up-time

(Optional) keepalive- alive time

vpc-keepalive-send-tstamp

(Optional) vPC keepalive last send timestamp

vpc-keepalive-send-interface

(Optional) vPC keepalive send interface

vpc-keepalive-receive-tstamp

(Optional) vPC keepalive last receive timestamp

vpc-keepalive-receive-interface

(Optional) vPC keepalive receive interface

vpc-keepalive-lastupdate

(Optional) vPC keepalive last update from peer

vpc-keepalive-interval

(Optional) vPC keepalive timeout

vpc-keepalive-timeout

(Optional) vPC keepalive interval

vpc-keepalive-hold-timeout

(Optional) hold timeout

vpc-keepalive-vrf

(Optional) vrf name

vpc-keepalive-udp-port

(Optional) udp port

vpc-keepalive-tos

(Optional) tos value

Command Mode

- /exec

show vpc role

show vpc role [ __readonly__ <vpc-peer-status> <vpc-peer-status-reason> [ <vpc-current-role> ] [ <vpc-es-current-role> ] <dual-active-detected> <vpc-system-mac> <vpc-system-prio> <vpc-local-system-mac> <vpc-local-system-prio> ]

Syntax Description

Syntax Description

vpc

Virtual Port Channel configuration

role

vPC role status

__readonly__

(Optional) Read Only

vpc-peer-status

(Optional) vPC peer status

vpc-peer-status-reason

(Optional) vPC peer status reason

vpc-current-role

(Optional) vPC role

vpc-es-current-role

(Optional) vPC role

dual-active-detected

(Optional) Dual active detection status

vpc-system-mac

(Optional) vPC system mac

vpc-local-system-mac

(Optional) vPC local system mac

vpc-system-prio

(Optional) vPC system priority

vpc-local-system-prio

(Optional) vPC local system priority

Command Mode

- /exec

show vpc statistics peer-keepalive

show vpc statistics peer-keepalive [ __readonly__ <vpc-keepalive-counters-tx> <vpc-keepalive-counters-rx> <vpc-keepalive-avg-rx-interval> <vpc-keepalive-peer-state-changes> ]

Syntax Description

Syntax Description

vpc

Virtual Port Channel configuration

statistics

Statistics

peer-keepalive

peer keepalive module related statistics

__readonly__

(Optional) Read Only

vpc-keepalive-counters-tx

(Optional) tx counters

vpc-keepalive-counters-rx

(Optional) rx counters

vpc-keepalive-avg-rx-interval

(Optional) avg rx interval in ms

vpc-keepalive-peer-state-changes

(Optional) peer state changes

Command Mode

- /exec

show vpc statistics vpc

show vpc statistics { vpc <vpc_num> | peer-link }

Syntax Description

Syntax Description

vpc

Virtual Port Channel configuration

statistics

Statistics

vpc_num

Virtual Port Channel number

peer-link

stats for peer-link

Command Mode

- /exec

show vrf

show vrf [ <vrf-name> | <vrf-known-name> | all ] [ order id ] [ detail ] [ passive ] [ __readonly__ TABLE_vrf <vrf_name> <vrf_id> <vrf_state> [ <vrf_reason> ] [ <vrf_pend> ] [ <vpnid> <rd> <vni> <max_routes> <mid_threshold> ] [ { TABLE_tib <tib_id> <tib_af> <tib_nonce> <tib_state> [ <tib_reason> ] [ <tib_pend> ] } ] ]

Syntax Description

Syntax Description

show

Show running system information

vrf

Display VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display VRF information for all VRFs

order

(Optional) Specify ordering

id

(Optional) Order by ID

detail

(Optional) Display VRF detail information

passive

(Optional) Display passive VRF information

__readonly__

(Optional)

TABLE_vrf

(Optional)

TABLE_tib

(Optional)

vrf_name

(Optional)

vrf_id

(Optional)

vrf_state

(Optional)

vrf_reason

(Optional)

vrf_pend

(Optional)

vpnid

(Optional)

rd

(Optional)

max_routes

(Optional)

mid_threshold

(Optional)

tib_id

(Optional)

tib_af

(Optional)

tib_nonce

(Optional)

tib_state

(Optional)

tib_reason

(Optional)

tib_pend

(Optional)

vni

(Optional)

Command Mode

- /exec

show vrf

show vrf [ <vrf-name> | <vrf-known-name> | all ]

Syntax Description

Syntax Description

show

Show running system information

vrf

Display VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

all

(Optional) Display VRF information for all VRFs

Command Mode

- /exec

show vrf topology

show vrf topology [ order id ] [ detail ] [ __readonly__ TABLE_tib <vrf_name> <tib_af> <tib_name> <tib_id> <tib_state> [ <tib_reason> <tib_pend> ] ]

Syntax Description

Syntax Description

show

Show running system information

vrf

Configure VRF parameters

topology

Display topology information

order

(Optional) Specify ordering

id

(Optional) Order by ID

detail

(Optional) Display topology detail information

__readonly__

(Optional)

TABLE_tib

(Optional)

vrf_name

(Optional)

tib_af

(Optional)

tib_name

(Optional)

tib_id

(Optional)

tib_state

(Optional)

tib_reason

(Optional)

tib_pend

(Optional)

Command Mode

- /exec

show vrrp

show vrrp [ [ summary ] | { [ statistics | detail ] [ interface <interface_id> ] [ vr <vr_id> ] [ master | backup | init ] + } ] [ __readonly__ <show_vrrp_start> { TABLE_vrrp_group <sh_if_index> <sh_group_id> <sh_group_type> <sh_group_state> <sh_group_preempt> <sh_vip_addr> { [ TABLE_sec_vip_addr <sh_sec_vip_addr> ] } <sh_priority> [ <sh_cfg_priority> <sh_fwd_thr_lower> <sh_fwd_thr_upper> ] <sh_adv_interval> [ <sh_auth_text> ] [ <sh_vmac> ] [ <sh_master_router> ] [ <sh_native_track_intf> <sh_native_track_priotiry> ] { [ TABLE_vrrp_track <sh_track_object_id> <sh_decrement_priority> <sh_track_object_state> ] } [ <sh_bfd_status> <sh_bfd_session> ] } <sh_vrrp_end> ]

Syntax Description

Syntax Description

show

Show running system information

vrrp

Show vrrp information

summary

(Optional) Show vrrp summary

statistics

(Optional) Show vrrp statistics

detail

(Optional) Show detailed information

interface

(Optional) Show vrrp info for the interface

interface_id

(Optional)

vr

(Optional) Show vrrp info for the group

vr_id

(Optional) [1-255] enter IPv4 vr group

master

(Optional) Groups in Master state

backup

(Optional) Groups in Backup state

init

(Optional) Groups in Init state

__readonly__

(Optional) Read only

show_vrrp_start

(Optional) Show vrrp start

TABLE_vrrp_group

(Optional) Group detail table

sh_if_index

(Optional) Interface type and number

sh_group_id

(Optional) Group number

sh_group_type

(Optional) Group type

sh_group_state

(Optional) VRRP group state

sh_group_preempt

(Optional) Group preemption statue

sh_vip_addr

(Optional) Virtual IP Address

TABLE_sec_vip_addr

(Optional) Secondary virtual ip address table

sh_sec_vip_addr

(Optional) Secondary virtual ip address

sh_priority

(Optional) Priority of VRRP group

sh_auth_text

(Optional) Authentication text

sh_cfg_priority

(Optional) Configured priority of VRRP group

sh_fwd_thr_lower

(Optional) Lower forwarding threshold

sh_fwd_thr_upper

(Optional) Upper forwarding threshold

sh_adv_interval

(Optional) Advertisement interval

sh_vmac

(Optional) Virtual MAC

sh_master_router

(Optional) Master router

sh_native_track_intf

(Optional) Native tracked interface

sh_native_track_priotiry

(Optional) Decrement priority for Native tracking

TABLE_vrrp_track

(Optional) VRRP tracking table

sh_track_object_id

(Optional) Object id of tracking object

sh_decrement_priority

(Optional) Decrement priority

sh_track_object_state

(Optional) Tracking object state

sh_bfd_status

(Optional) BFD status

sh_bfd_session

(Optional) BFD session status

sh_vrrp_end

(Optional) Show vrrp end

Command Mode

- /exec

show vrrp bfd-sessions

show vrrp bfd-sessions [ interface <interface-id> [ to <ipaddress> ] ] [ __readonly__ TABLE_bfd_sess <interface> { <src_addr> | <src_addr_v6> } { <dst_addr> | <dst_addr_v6> } <session_state> <ref_count> <displayed_interface> { TABLE_groups <group_id> <vrrp_state> <bfd_status> <operation> <time> } ]

Syntax Description

Syntax Description

show

Show running system information

vrrp

Show vrrp information

bfd-sessions

BFD sessions

interface

(Optional) Groups on this interface

interface-id

(Optional) Interface

to

(Optional) To IP address

ipaddress

(Optional) Sessions to IP address

__readonly__

(Optional)

TABLE_bfd_sess

(Optional)

interface

(Optional) Interface

src_addr

(Optional) IPv4 Source address

dst_addr

(Optional) IPv4 Destination address

session_state

(Optional) Session state

ref_count

(Optional) Ref count

displayed_interface

(Optional) Displayed interface

TABLE_groups

(Optional)

group_id

(Optional) Group id

vrrp_state

(Optional) VRRP STATE

bfd_status

(Optional) BFD STATE

operation

(Optional) Operation

time

(Optional) Time

Command Mode

- /exec

show vrrp internal configuration event-history errors

show vrrp internal configuration event-history errors

Syntax Description

Syntax Description

show

Show running system information

vrrp

Show vrrp information

internal

Show internal vrrp information

configuration

Show internal vrrp configuration information

event-history

Show event history

errors

Show error logs of VRRP Mgr

Command Mode

- /exec

show vrrp internal configuration event-history msgs

show vrrp internal configuration event-history msgs

Syntax Description

Syntax Description

show

Show running system information

vrrp

Show vrrp information

internal

Show internal vrrp information

configuration

Show internal vrrp configuration information

event-history

Show event history

msgs

Show MTS logs of VRRP Mgr

Command Mode

- /exec

show vrrp internal debugs

show vrrp internal [ event-history ] debugs

Syntax Description

Syntax Description

show

Show running system information

vrrp

Show information about VRRP

internal

Show internal vrrp information

event-history

(Optional) Show various event logs of VRRP

debugs

Show debug logs of VRRP

Command Mode

- /exec

show vrrp internal engine event-history errors

show vrrp internal engine event-history errors

Syntax Description

Syntax Description

show

Show running system information

vrrp

Show vrrp information

internal

Show internal vrrp information

engine

Show internal vrrp configuration information

event-history

Show event history

errors

Show error logs of VRRP Engine

Command Mode

- /exec

show vrrp internal engine event-history msgs

show vrrp internal engine event-history msgs

Syntax Description

Syntax Description

show

Show running system information

vrrp

Show vrrp information

internal

Show internal vrrp information

engine

Show internal vrrp configuration information

event-history

Show event history

msgs

Show MTS logs of VRRP Engine

Command Mode

- /exec

show vrrp internal info

show vrrp internal info { { counters [ <ctr_num> ] } | { { data-structures | state-history } [ vr <vr_id> ] [ interface <intf_num> ] } | bulking-stats }

Syntax Description

Syntax Description

show

Show running system information

vrrp

Show vrrp information

internal

Show internal vrrp information

info

Show internal vrrp info

counters

Show counters for vrrp

data-structures

Show vrrp data structures

ctr_num

(Optional) Enter the counter number to view

vr

(Optional) Show IPv4 virtual router information

vr_id

(Optional) [1-255] enter IPv4 vr group

interface

(Optional) Select interface

intf_num

(Optional)

bulking-stats

Bulk Queue Statistics/Info

state-history

Show vrrp state-history

Command Mode

- /exec

show vrrp internal info global

show vrrp internal info global

Syntax Description

Syntax Description

show

Show running system information

vrrp

Show vrrp information

internal

Show internal vrrp information

info

Show internal vrrp info

global

Show vrrp global information(FSRV)

Command Mode

- /exec

show vrrp internal mem-stats

show vrrp internal mem-stats [ uuid <uuid_num> ] [ vrrp-only ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

vrrp

Show information about vrrp

internal

Show internal vrrp information

mem-stats

Show memory allocation statistics of VRRP

uuid

(Optional) Show stats only for this uuid

uuid_num

(Optional) Enter uuid

vrrp-only

(Optional) Show stats of only VRRP Engine

detail

(Optional) Show detail memstats for vrrp

Command Mode

- /exec

show vrrpv3

show vrrpv3 [ brief | detail | statistics ] [ <intf> [ <group_num> ] ] [ <opt_v4_or_v6> ] [ all ] [ __readonly__ <global_drops> { TABLE_istats <i_intf> <i_drops> <ttl> <checksum> <version> <type> <length> <badid> <other> } { TABLE_grp <intf> <id> <af> <desc> <state> <duration> <vip> { TABLE_sec <addr> <prefix> } <vmac> <adv> <owner> <preempt> <delay> <delay_rem> <priority> <m_addr> <m_priority> <m_adv> <m_expire> <down> <down_expire> <adv_sent> <adv_err> <adv_recvd> <v2adv_sent> <v2adv_err> <v2adv_recvd> <drops> <incompat> <conflict> <bad_count> <bad_addr> <bad_config> <bad_advert> <bad_state> <bad_other> <init_master> <init_master_time> <init_backup> <init_backup_time> <back_master> <back_master_time> <master_back> <master_back_time> <mast_init> <mast_init_time> <back_init> <back_init_time> } ]

Syntax Description

Syntax Description

show

Show running system information

vrrpv3

VRRPv3 Show commands

all

(Optional) All VRRPV3 information

brief

(Optional) Brief output

detail

(Optional) Detail output

statistics

(Optional) Statistics output

opt_v4_or_v6

(Optional) Enter ipv4 or ipv6

intf

(Optional) Interface

group_num

(Optional) Group Number

__readonly__

(Optional)

TABLE_istats

(Optional) Interface-level VRRPv3 statistics

TABLE_grp

(Optional) VRRP Groups

TABLE_sec

(Optional) Secondary Addresses

global_drops

(Optional) Total dropped packets

i_intf

(Optional) Interface

i_drops

(Optional) Total dropped packets

ttl

(Optional) Invalid TTL/Hop limit

checksum

(Optional) Invalid checksum

version

(Optional) Invalid version

type

(Optional) Invalid message type

length

(Optional) Invalid length

badid

(Optional) Invalid group ID

other

(Optional) Other

intf

(Optional) Interface

id

(Optional) Group ID

af

(Optional) Address family

desc

(Optional) Description

state

(Optional) Group state

duration

(Optional) Time in current state

vip

(Optional) Primary virtual IP address

addr

(Optional) Secondary virtual IP address

prefix

(Optional) Secondary vIP prefix

vmac

(Optional) Virtual MAC address

adv

(Optional) Advertisement interval

preempt

(Optional) Preemption status

owner

(Optional) Owner mode

delay

(Optional) Preemption delay

delay_rem

(Optional) Preemption delay remaining

priority

(Optional) Priority

m_addr

(Optional) Group master router address

m_priority

(Optional) Group master priority

m_adv

(Optional) Master advertisement interval

m_expire

(Optional) Master expiration

down

(Optional) Master down interval

down_expire

(Optional) Master down expiration

adv_sent

(Optional) Advertisements sent

adv_err

(Optional) Advertisement errors

adv_recvd

(Optional) Advertisements received

v2adv_sent

(Optional) Advertisements sent (v2)

v2adv_err

(Optional) Advertisement errors (v2)

v2adv_recvd

(Optional) Advertisements received (v2)

drops

(Optional) Total dropped packets

incompat

(Optional) v2, Incompatible

conflict

(Optional) Address owner conflicts

bad_count

(Optional) Invalid address count

bad_addr

(Optional) Invalid IP address

bad_config

(Optional) Invalid IP address config

bad_advert

(Optional) Invalid advertisement interval

bad_state

(Optional) Invalid group state

bad_other

(Optional) Other

init_master

(Optional) Init to Master

init_master_time

(Optional) Last Occurrence

init_backup

(Optional) Init to Backup

init_backup_time

(Optional) Last Occurrence

back_master

(Optional) Backup to Master

back_master_time

(Optional) Last Occurrence

master_back

(Optional) Master to Backup

master_back_time

(Optional) Last Occurrence

mast_init

(Optional) Master to Init

mast_init_time

(Optional) Last Occurrence

back_init

(Optional) Backup to Init

back_init_time

(Optional) Last Occurrence

Command Mode

- /exec

show vrrpv3 internal debug

show vrrpv3 internal debug

Syntax Description

Syntax Description

show

Show running system information

vrrpv3

VRRPv3 Show commands

internal

Internal command

debug

Core Code Debug flags

Command Mode

- /exec

show vrrpv3 internal event-history debugs

show vrrpv3 internal event-history debugs

Syntax Description

Syntax Description

show

Show running system information

vrrpv3

VRRPv3 Show commands

internal

Internal command

event-history

Show various event history of vrrpv3

debugs

Show debug events of vrrpv3

Command Mode

- /exec

show vrrpv3 internal event-history errors

show vrrpv3 internal event-history errors

Syntax Description

Syntax Description

show

Show running system information

vrrpv3

VRRPv3 Show commands

internal

Internal command

event-history

Show various event history of vrrpv3

errors

Show error events of vrrpv3

Command Mode

- /exec

show vrrpv3 internal event-history msgs

show vrrpv3 internal event-history msgs

Syntax Description

Syntax Description

show

Show running system information

vrrpv3

VRRPv3 Show commands

internal

Internal command

event-history

Show various event history of vrrpv3

msgs

Show MTS events of vrrpv3

Command Mode

- /exec

show vrrpv3 internal high-availability database

show vrrpv3 internal high-availability { database [ summary ] | status }

Syntax Description

Syntax Description

show

Show running system information

vrrpv3

VRRPv3 Show commands

internal

Internal command

high-availability

VRRPv3 HA Information

database

HA database

summary

(Optional) Summary counters only

status

HA status and events

Command Mode

- /exec

show vrrpv3 internal mem-stats

show vrrpv3 internal mem-stats [ no-libs ] [ detail ]

Syntax Description

Syntax Description

show

Show running system information

vrrpv3

VRRPv3 Show commands

internal

Internal command

mem-stats

Memory usage stats

no-libs

(Optional) Exclude shared library information

detail

(Optional) Detailed information

Command Mode

- /exec

show vrrs client

show vrrs client [ <cname> ] [ __readonly__ { TABLE_client <name> <id> <all> <priority> { TABLE_tags <tname> } } ]

Syntax Description

Syntax Description

vrrs

VRRS Show commands

show

Show running system information

client

Information about VRRS clients

cname

(Optional) VRRS client name

__readonly__

(Optional)

TABLE_client

(Optional) VRRS clients

TABLE_tags

(Optional) VRRS tags

name

(Optional) VRRS client name

id

(Optional) VRRS client id

priority

(Optional) Priority

all

(Optional) Client follows all tags

tname

(Optional) VRRS tag name

Command Mode

- /exec

show vrrs pathway

show vrrs pathway [ <intf> ] [ __readonly__ { TABLE_pws <name> <state> <vrrs_push_state> <vmac> <vmac_state> <vmac_dbg> <pvmac> <pvmac_state> <pvmac_dbg> <af> [ <desc> ] <opt> <eval> [ { TABLE_vips <addr> [ <flags> ] } ] } ]

Syntax Description

Syntax Description

vrrs

VRRS Show commands

show

Show running system information

pathway

Information about VRRS pathways

intf

(Optional) Interface

__readonly__

(Optional)

TABLE_pws

(Optional) Show VRRS pathways

TABLE_vips

(Optional) Pathway vIP addresses

name

(Optional) Pathway name

state

(Optional) Pathway state

vrrs_push_state

(Optional) VRRS push state

vmac

(Optional) Virtual MAC address

vmac_state

(Optional) Virtual MAC state

vmac_dbg

(Optional) Virtual MAC debug flags

pvmac

(Optional) Previous Virtual MAC address

pvmac_state

(Optional) Previous MAC state

pvmac_dbg

(Optional) Previous MAC debug flags

af

(Optional) Pathway address-family

desc

(Optional) Pathway description

opt

(Optional) Option flags

eval

(Optional) Eval flags

addr

(Optional) Virtual IP address

flags

(Optional) Virtual IP address flags

Command Mode

- /exec

show vrrs pathway address

show vrrs pathway [ <intf> ] address

Syntax Description

Syntax Description

vrrs

VRRS Show commands

show

Show running system information

pathway

Information about VRRS pathways

intf

(Optional) Interface

address

Internal information about pathway addresses

Command Mode

- /exec

show vrrs server

show vrrs server [ __readonly__ { TABLE_srv <name> <af> <intf> <state> <vmac> <vip> [ { TABLE_tag <tag> } ] } ]

Syntax Description

Syntax Description

vrrs

VRRS Show commands

show

Show running system information

server

Information about VRRS servers

__readonly__

(Optional)

TABLE_srv

(Optional) VRRS Servers

TABLE_tag

(Optional) VRRS tags associated with each server

name

(Optional) VRRS server name

af

(Optional) Address-family

intf

(Optional) Interface

state

(Optional) VRRS server state

vmac

(Optional) Virtual MAC address

vip

(Optional) Virtual IP address

tag

(Optional) VRRS tag

Command Mode

- /exec

show vrrs tag

show vrrs tag [ <tagname> ] [ __readonly__ { TABLE_tag <name> <server> [ { TABLE_client <id> <client> <all> } ] } ]

Syntax Description

Syntax Description

vrrs

VRRS Show commands

show

Show running system information

tag

Information about VRRS tags

tagname

(Optional) VRRS tag

__readonly__

(Optional)

TABLE_tag

(Optional) Known VRRS tags

TABLE_client

(Optional) VRRS clients listening

name

(Optional) VRRS tag name

server

(Optional) VRRS server name

id

(Optional) VRRS client id

client

(Optional) VRRS client name

all

(Optional) Client follows all tags

Command Mode

- /exec

show vxlan

show vxlan [ interface [ <int-id> | <ch-id> ] ]

Syntax Description

Syntax Description

show

Show running system information

vxlan

VxLAN VLANs

interface

(Optional) Interface

int-id

(Optional) Interface

ch-id

(Optional) Port-Channel name

Command Mode

- /exec

Chapter 23. W Show Commands

- show wred-queue qos-group-map

- show wrr-queue qos-group-map

- show wrr unicast-bandwidth

show wred-queue qos-group-map

show wred-queue qos-group-map

Syntax Description

Syntax Description

show

Show running system information

wred-queue

Show WRED qos-group information

qos-group-map

Display mapping of the qos-group information

Command Mode

- /exec

show wrr-queue qos-group-map

show wrr-queue qos-group-map

Syntax Description

Syntax Description

show

Show running system information

wrr-queue

Display mapping of traffic priority (CoS) values to L3 Multicast

qos-group-map

Show wrr-queue qos-group-map

Command Mode

- /exec

show wrr unicast-bandwidth

show wrr unicast-bandwidth

Syntax Description

Syntax Description

show

Show running system information

wrr

unicast bandwidth configuration

unicast-bandwidth

rate in precentage of data rate

Command Mode

- /exec

Chapter 24. X Show Commands

- show xml server internal exec-info

- show xml server internal history

- show xml server logging configuration

- show xml server status

show xml server internal exec-info

show xml server internal exec-info { all | <session_id> } [ __readonly__ { <shmem_size> <shmem_slot_size> <nb_of_slots> <free_slots> } [ { TABLE_session_slots <offset> <session_id> <start_time> <ip_addr> <state> } ] ]

Syntax Description

Syntax Description

show

Show running system information

xml

xml agent

server

xml agent server

internal

Commands for internal use

exec-info

Information about xml sessions execution

all

all sessions

__readonly__

(Optional)

shmem_size

(Optional) shared memory size

shmem_slot_size

(Optional) shared memory slot size

nb_of_slots

(Optional) number of slots

free_slots

(Optional) number of free slots

TABLE_session_slots

(Optional) all xml sessions

offset

(Optional) offset on the shared memory segment

session_id

session number

start_time

(Optional) the xml session start time

ip_addr

(Optional) ip address of the session

state

(Optional) slot state

Command Mode

- /exec

show xml server internal history

show xml server internal history { commands | errors | all_history } [ session <session_id> ] [ __readonly__ { TABLE_history <session_id> <ip_addr> [ { TABLE_commands <cmdtime> <cmd> } ] [ { TABLE_errors <errtime> <err> } ] } ]

Syntax Description

Syntax Description

show

Show running system information

xml

xml agent

server

xml agent server

internal

Commands for internal use

history

XML History

commands

XML commands processed

errors

Errors returned by XML commands

all_history

All history elements

session

(Optional) xml agent session

session_id

(Optional) xml agent session id

__readonly__

(Optional)

TABLE_history

(Optional) xml commands history

ip_addr

(Optional) ip address of the session

session_id

(Optional) xml agent session id

TABLE_commands

(Optional) all xml commands

cmdtime

(Optional) Time when command was issued

cmd

(Optional) CLI equivalent of an XML instance

TABLE_errors

(Optional) errors returned by xml commands

errtime

(Optional) Time when error was encountered

err

(Optional) CLI equivalent of an XML instance

Command Mode

- /exec

show xml server logging configuration

show xml server logging configuration

Syntax Description

Syntax Description

show

Show running system information

xml

Show xmlagent logging configuration

server

xml agent server

logging

Show logging configuration and contents of logfile

configuration

Show facility logging configuration

Command Mode

- /exec

show xml server status

show xml server status [ __readonly__ { operational_status <o_status> } { maximum_sessions_configured <max_session> } [ { TABLE_sessions <session_id> <user_name> <start_time> <sap_id> <timeout> <time_remaining_to_timeout> <ip_addr> } ] ]

Syntax Description

Syntax Description

show

to display xml agent information

xml

xml agent

server

xml agent server

status

display xml agent information

__readonly__

(Optional)

operational_status

(Optional) run-time info about xml

o_status

(Optional) operational status of the xml

maximum_sessions_configured

(Optional) the max session configured

max_session

(Optional) max sessions number

TABLE_sessions

(Optional) all xml sessions

session_id

(Optional) one xml session id

user_name

(Optional) the xml session user name

start_time

(Optional) the xml session start time

sap_id

(Optional) the mts sap id

timeout

(Optional) inactivity timeout value

time_remaining_to_timeout

(Optional) time remaining to timeout

ip_addr

(Optional) ip address of the session

Command Mode

- /exec

Part II. XML Support

- Commands with XML/JSON Support

Chapter 25. Commands with XML/JSON Support

- XML Support for Show Commands

XML Support for Show Commands

Show Commands

XML Support

show [ <ip_ipv6_mac> ] access-lists [ <name> ] [ capture session <capture_session> ] [ <expanded> | <summary> | <private> | <brief> ]

Yes

show [ ip ] bgp { peer-session [ <session-template-name> ] | peer-policy [ <policy-template-name> ] }

Yes

show [ ip ] bgp paths

Yes

show [ ip ] bgp peer-template [ <peer-template-name> ]

Yes

show [ vdc ] resource internal info [ { resource [ <res-mgr-res-known-name-all> [ vdc <vdc_id> ] ] } ]

No

show { { ipv6 route } | { routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] } } [ l3vm-info ]

Yes

show { consistency-checker l2 module <modnum> | forwarding consistency l2 <modnum> }

Yes

show { hostname | switchname }

Yes

show { ip mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_01234567890

No

show { ip mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_01234567890

No

show { ip mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | ip bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_01234567890

No

show { ipv6 | ip } rip [ instance <inst> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show { ipv6 | ip } rip [ instance <inst> ] interface [ <interface> ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show { ipv6 | ip } rip [ instance <inst> ] memory

Yes

show { ipv6 | ip } rip [ instance <inst> ] neighbor [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show { ipv6 | ip } rip [ instance <inst> ] route [ { <ipv6-prefix> | <ip-prefix> } [ { longer-prefixes | shorter-prefixes } ] ] [ summary ] [ vrf { <vrf-

Yes

show { ipv6 | ip } rip [ instance <inst> ] statistics [ * | <interface> ]

Yes

show { ipv6 | ip } rip [ instance <tag> ] internal event-history { errors | msgs | database | packet | event | input | output | policy | timer | cli }

No

show { ipv6 | ip } rip [ instance <tag> ] internal library-info

No

show { ipv6 | ip } rip [ instance <tag> ] internal mem-stats [ all | shared ] [ no-libs ] [ detail ]

No

show { l2 | fabricpath } mroute { [ vdc-omf ] { [ resolved ] } | [ vlan <vlanid> ] { { [ omf ] | [ flood ] | [ source { <srcaddr> | <v6srcaddr> | <macsr

Yes

show { l2 | fabricpath } mroute flood vlan <vlan_id>

Yes

show { l2 | fabricpath } mroute summary [ detail ]

Yes

show { l2 | fabricpath } multicast ftag [ <ftag-id> ]

Yes

show { l2 | fabricpath } multicast trees [ topo <topo-id> ] [ ftag <ftag-id> ] [ hex ]

Yes

show { routing | ip route } [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] [ l3vm-info ] [

Yes

show { system internal | hardware } access-list [ vdc <vdc_id> ] database { interface | vlan | policy | process } [ module <module> ]

Yes

show { system internal | hardware } access-list [ vdc <vdc_id> ] database { interface | vlan | policy | process } [ module <module> ]

Yes

show { system internal | hardware } access-list { summary | [ vdc <vdc_id> ] { [ interface <if_name> | vlan <vlan_id> | inband table <table> ] [ { inpu

Yes

show { system internal | hardware } access-list { summary | [ vdc <vdc_id> ] { [ interface <if_name> | vlan <vlan_id> | inband table <table> ] [ { inpu

Yes

show { system internal | hardware } access-list resource { { { entries | l4ops | redirect | ipv6-compression | mac-compression | aqm-d | aqm-q | oq | o

Yes

show { system internal | hardware } access-list resource { { { entries | l4ops | redirect | ipv6-compression | mac-compression | aqm-d | aqm-q | oq | o

Yes

show | topo | peerid | startup-route | server | signal | ksink-ha | all }

No

show aaa accounting

Yes

show aaa authentication

Yes

show aaa authentication login { mschap | mschapv2 | chap }

Yes

show aaa authentication login ascii-authentication

Yes

show aaa authentication login error-enable

Yes

show aaa authentication login invalid-username-log

No

show aaa authentication login password-aging

Yes

show aaa authorization [ all ]

Yes

show aaa groups

Yes

show aaa local user blocked

No

show aaa user default-role

Yes

show accounting log [ { <i0> | start-time <SYYYY> <SMonth> <SDate> <STime> [ end-time <EYYYY> <EMonth> <EDate> <ETime> ] } ]

Yes

show accounting log all

Yes

show accounting log last-index

Yes

show accounting log nvram [ { <i0> | start-time <SYYYY> <SMonth> <SDate> <STime> [ end-time <EYYYY> <EMonth> <EDate> <ETime> ] } ]

Yes

show accounting log nvram last-index

Yes

show accounting log nvram start-seqnum <SSEQNUM> [ end-seqnum <ESEQNUM> ]

Yes

show accounting log start-seqnum <SSEQNUM> [ end-seqnum <ESEQNUM> ]

Yes

show acl status

Yes

show adbm internal [ event-history ] errors

No

show adbm internal [ event-history ] msgs

No

show adbm internal [ event-history ] vsan <i0>

No

show adbm internal info [ { global | vsan <i0> } ]

No

show adbm internal mem-stats [ detail ]

No

show archive

No

show arp access-lists [ <name> ] [ ] [ capture session <session-id> ]

Yes

show background

No

show banner motd

Yes

show bash-shell

Yes

show bfd { [ vrf { <vrf-name> | <vrf-known-name> | all } ] } { [ <ip_type> ] } neighbors { [ module <module_no> ] | [ interface <intf_id> ] | [ applicatio

Yes

show bfd addrmap [ application <appid> discriminator <discr> address-type <addrtype> address <addr> ]

Yes

show bfd clients

Yes

show bfd discrmap [ <discr> ]

Yes

show bfd intfipmap [ interface <intf> address-type <addrtype> address <addr> ]

Yes

show bfd scalar

Yes

show bfd session { [ discriminator <sessionIndex> ] | [ interface <intf_id> ] | [ application <app_name> ] | [ src-ip <src_ip> ] | [ dest-ip <dest_ip> ] |

Yes

show bfd-app session status { src-ip { <src_ip> dest-ip <dest_ip> | <src_ipv6> dest-ip <dest_ipv6> } { iod <iod_id> | intf <intf_id> } | <all> }

No

show bgp [ internal ] event-history { <bgp-event-hist> | errors | msgs | detail } [ statistics ]

No

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { { { ip | ipv4 } { unicast | multicast } | vpnv4 unicast | ipv4 mdt | lin

Yes

"show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { { ip | ipv4 } { unicast | multicast } | ipv4 mdt [ rd { ""<ext-comm-rd-aa"

Yes

"show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { { ip | ipv4 } { unicast | multicast } | vpnv4 unicast [ rd { ""<ext-comm-"

Yes

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } } pre

Yes

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | al

No

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | al

No

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | all

Yes

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | all

Yes

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | all

Yes

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | all

Yes

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | ipv

Yes

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | ipv

Yes

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | ipv

Yes

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | ipv

Yes

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | ipv

Yes

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | ipv

Yes

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | ipv

Yes

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } flap-statistics [ <ip-prefix> | <ip-

Yes

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } policy statistics { { redistribute [

Yes

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] convergence [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_0123

Yes

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] convergence private [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345

No

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] process [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_01234567

Yes

show bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] sessions [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 }

Yes

show bgp { { [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } |

Yes

show bgp { { [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } |

Yes

show bgp { { [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } |

Yes

show bgp { { [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } |

Yes

show bgp { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt | vpnv4 unicast | vpnv6 unicast | ipv6 labeled-unicast | link-s

Yes

show bgp internal { [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { all | debug | io | af | mqstat | bestpath | bfd | inject-map |

No

show bgp internal { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicast } | ipv4 mdt | vpnv4 unicast | vpnv6 unicast | ipv6 labeled-unicas

No

show bgp internal epe

No

show bgp internal evi [ <evi-id> ]

Yes

show bgp internal interface [ <interface> ]

No

show bgp internal library-info

No

show bgp internal lslib

No

show bgp internal mem-stats [ { shared | all [ no-libs ] | no-libs } ] [ detail ]

No

show bgp internal pss

No

show bgp internal rpc

No

show bgp l3vpn [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ]

Yes

show bgp private [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { { ip | ipv4 } { unicast | multicast } | ipv6 { unicast | multicas

No

show bgp private [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { all_private | session | ipc | rnh | lists | rpm-info [ route-map

No

show bgp private attr [ remote-nh ] [ [ [ ipv4 { unicast | multicast } <ip-prefix> ] | [ ipv6 { unicast | multicast } <ipv6-prefix> ] ] [ detail ] ]

No

show bgp statistics

Yes

show boot

Yes

show boot auto-copy

Yes

show boot auto-copy list

Yes

show boot current

Yes

show boot mode

Yes

show boot module [ [ <module> ] [ <s0> ] [ ] ]

Yes

show boot order

Yes

show boot sup-1

Yes

show boot sup-2

Yes

show boot timings

No

show boot variables

Yes

show bootmode [ module <module> ]

Yes

show buffers ip [ { [ all <count> ] [ free <count> ] } ]

No

show callhome

Yes

show callhome destination-profile

Yes

show callhome destination-profile profile <s0>

Yes

show callhome destination-profile profile CiscoTAC-1

Yes

show callhome destination-profile profile full-txt-destination

Yes

show callhome destination-profile profile short-txt-destination

Yes

show callhome transport

Yes

show callhome transport-email

Yes

show callhome user-def-cmds

No

show cdp { all | interface <if0> }

Yes

show cdp { entry { all1 | name <s0> } }

Yes

show cdp global

Yes

show cdp internal event-history debugs

No

show cdp internal event-history errors

No

show cdp internal event-history msgs

No

show cdp internal global-info

No

show cdp internal mem-stats [ detail ]

No

show cdp internal runtime-contexts [ interface <if> ]

No

show cdp neighbors [ interface <if> ]

Yes

show cdp neighbors [ interface <if> ] detail

Yes

show cdp traffic interface2 <if2>

Yes

show cfs application [ { name <cfs-dyn-app-name> | sap <i0> } ]

Yes

show cfs internal application [ { name <cfs-dyn-app-name> | sap <i1> } ]

No

show cfs internal ethernet-peer { database | statistics | error-statistics | event-log }

No

show cfs internal event-history errors

No

show cfs internal event-history init [ { ip | ethernet-discovery | transmission } ]

No

show cfs internal event-history merge [ { [ name <cfs-dyn-app-name> ] | [ sap <i1> ] } ]

No

show cfs internal event-history msgs

No

show cfs internal event-history notif [ { name <cfs-dyn-app-name> | sap <i0> } ]

No

show cfs internal ip database

No

show cfs internal mem-stats [ detail ]

No

show cfs internal merge log { name <cfs-dyn-app-name> | sap <i1> }

No

show cfs internal message-context { name <cfs-dyn-app-name> | sap <i0> }

No

show cfs internal notification log { name <cfs-dyn-app-name> | sap <i1> }

No

show cfs internal remote application

No

show cfs internal session-history { name <cfs-dyn-app-name> [ { detail } ] | sap <i1> [ { detail2 } ] }

No

show cfs internal static-peers { info | log }

No

show cfs internal statistics [ { name <s0> | sap <i1> } ]

No

show cfs internal vsan database

No

show cfs lock [ { name <cfs-dyn-app-name> | sap <i1> } ]

Yes

show cfs merge status [ { name <cfs-dyn-app-name> [ detail ] | sap <i1> [ detail2 ] } ]

Yes

show cfs peers [ { name <cfs-dyn-app-name> | sap <i1> } ]

Yes

show cfs regions [ { brief [ region <i0> ] | name <cfs-dyn-app-name> | region1 <i1> } ]

Yes

show cfs remote-app vsan <i0> domain <i1>

No

show cfs remote-switches vsan <i0>

Yes

show cfs static peers

No

show cfs status

Yes

show checkpoint [ all ] [ user | system ]

Yes

show checkpoint <chkpoint_name> [ all ]

Yes

show checkpoint summary [ user | system ]

Yes

show class-map [ { [ type qos ] [ <cmap-name> | xxx <color-map-enum-name> ] } | { type queuing [ yyy <cmap-enum-name> | zzz <default-cmap-enum-name> |

Yes

show class-map type control-plane [ <cmap-name> ]

Yes

show class-map type network-qos [ <cmap-name-nq> ]

Yes

show class-map type psp { [ <cmap-name-plc> [ client <clienttype> <clientID> ] [ cfg-mode <cfgmode> ] ] | [ handle <ppf_id> ] }

Yes

show cli alias [ name <s0> ]

No

show cli dynamic integers [ <name> ]

Yes

show cli dynamic strings [ <name> ]

Yes

show cli history [ this-mode-only | exec-mode | config-mode ] [ <count> | unformatted ] +

No

show cli interface table

No

show cli internal last-command status

No

show cli internal mem-stats [ no-libs ] [ detail ]

No

show cli internal sdwrap

No

show cli list [ detail | recurse | <component> | <max-per-cmd> ] +

No

show cli registry [ ctags | tags | modes | session | inherit ]

No

show cli syntax [ long | recurse | has-xml-out | has-no-xml-out | is-data-modeled ] + [ roles [ network-admin | network-operator | <roles-mask> ] ] [ ha

No

show cli variables

No

show clock [ detail ]

Yes

show clock utc

No

show config-profile [ name <all_conf_profile_name> ]

Yes

show config-profile applied manually

Yes

show configuration session

Yes

show configuration session <s3>

Yes

show configuration session <s3> vsh

Yes

show configuration session global-info

Yes

show configuration session status [ <s3> ]

Yes

show configuration session summary

Yes

show consistency-checker copp

No

show consistency-checker fex-interfaces fex <id>

No

show consistency-checker forwarding [ ip | ipv4 ] [ unicast ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] | show forwarding [

Yes

show consistency-checker forwarding [ ip | ipv4 ] [ unicast ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] | show forwarding [

Yes

show consistency-checker forwarding ipv6 [ unicast ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] | show forwarding ipv6 [ uni

Yes

show consistency-checker forwarding ipv6 [ unicast ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ] | show forwarding ipv6 [ uni

Yes

show consistency-checker forwarding recover

No

show consistency-checker l2-tahoe module <module> [ unit <unit> ]

No

show consistency-checker l2-tahoe switchport interface <if_name>

No

show consistency-checker l3-interface module <moduleid>

No

show consistency-checker link-state module <module>

No

show consistency-checker membership port-channels [ interface <ch-id> ]

No

show consistency-checker membership vlan <vlanid> [ private-vlan ]

No

show consistency-checker nxapi interface

No

show consistency-checker pacl module <module>

No

show consistency-checker pacl port-channels [ interface <ch-id> ]

No

show consistency-checker qinvni

No

show consistency-checker racl module <module>

No

show consistency-checker racl port-channels [ interface <ch-id> ]

No

show consistency-checker stp-state vlan <vlan>

No

show consistency-checker vacl

No

show consistency-checker vxlan bgp

No

show consistency-checker vxlan interface { <int-id> | <ch-id> }

No

show consistency-checker vxlan peers

No

show consistency-checker vxlan routes

No

show consistency-checker vxlan vlan <vlanid>

No

show copp diff profile <profile_type> [ prior-ver ] profile2 <profile_type2>

No

show copp profile { strict | moderate | lenient | dense }

Yes

show copp status

Yes

show copyright

Yes

show cores [ vdc-all | { vdc [ <e-vdc2> | <vdc-id> ] } ]

Yes

show crypto ca certificates

Yes

show crypto ca certificates <s0>

Yes

show crypto ca certstore

Yes

show crypto ca crl <s0>

Yes

show crypto ca internal certificates

No

show crypto ca remote-certstore

Yes

show crypto ca trustpoints

Yes

show crypto certificatemap

Yes

show crypto key mypubkey rsa

Yes

show crypto ssh-auth-map

Yes

show debug

No

"show debug ""tacacs+"" "

No

show debug { bgp | ip bgp }

No

show debug { clis | clis-all }

No

show debug { igmp | ip igmp }

No

show debug { keystore | sksd }

No

show debug { logfile <s0> }

No

show debug { ospf | ip ospf }

No

show debug { pim | ip pim }

No

show debug { port-profile | session-mgr | csm }

Yes

show debug aaa

No

show debug acllog

No

show debug acllog bypass

No

show debug aclmgr

No

show debug aclqos

No

show debug aclqos bypass

No

show debug aclqos debug-level

No

show debug adbm

No

show debug adbm bypass

No

show debug arp

No

show debug ascii-cfg

No

show debug bfd

No

show debug bfd-app

No

show debug bootvar

No

show debug callhome

No

show debug capability

No

show debug cdp

No

show debug cert-enroll

No

show debug cfs

No

show debug clk_mgr

No

show debug confcheck

No

show debug copp

No

show debug copp bypass

No

show debug core

No

show debug device_test

No

show debug dhclient

No

show debug diagclient

No

show debug diagmgr

No

show debug eltm

No

show debug eltm bypass

No

show debug ethdstats

No

show debug ethpm

No

show debug ethpm bypass

No

show debug evmc

No

show debug evms

No

show debug exceptionlog

No

show debug fabric forwarding

No

show debug fc2

No

show debug fcfwd

No

show debug fcoe_klm

No

show debug fm

No

show debug fs-daemon

No

show debug gpixm

No

show debug gpixm bypass

No

show debug im

No

show debug im bypass

No

show debug ip { ipc | mpacket | packet | icmp }

No

show debug ip igmp snooping

No

show debug ip mfwd packet

No

show debug ip mrouting

No

show debug ip routing

No

show debug ipconf

No

show debug ipconf bypass

No

show debug ipconf ipv6

No

show debug ipfib

No

show debug ipqos

No

show debug ipqos debug-level

Yes

show debug ipv6 { icmp | mld | nd }

No

show debug ipv6 { ipc | mpacket | packet }

No

show debug ipv6 mrouting

No

show debug ipv6 routing

No

show debug kadb

No

show debug klm-rwsem

No

show debug l2fm

No

show debug l2fm bypass

No

show debug l2fwder

No

show debug l2pt

No

show debug l2rib

No

show debug license

No

show debug lim

No

show debug lim bypass

No

show debug m2rib

No

show debug mfdm

No

show debug mfdm bypass

No

show debug mmode

No

show debug module

No

show debug monitor

No

show debug mpls forwarding

No

show debug mts

No

show debug mvsh

No

show debug ntp

No

show debug nve

No

show debug obfl

No

show debug pfstat

No

show debug pfstat bypass

No

show debug pixm

No

show debug pixm bypass

No

show debug platform

No

show debug plcmgr

No

show debug plog

No

show debug pltfm_config

No

show debug pltfm_config bypass

No

show debug plugin

No

show debug plugin bypass

No

show debug port_lb

No

show debug port-channel

No

show debug port-channel bypass

No

show debug port-client

No

show debug port-client bypass

No

show debug psshelper

No

show debug psshelper_gsvc

No

show debug radius

No

show debug redundancy

No

show debug res_mgr

No

show debug res_mgr bypass

No

show debug rip

No

show debug sal

No

show debug security

No

show debug sensor

No

show debug snmp

No

show debug snmpmib

No

show debug snmpmib bypass

No

show debug spanning-tree

No

show debug spanning-tree bypass

No

show debug spm

No

show debug spm bypass

No

show debug statsclient

No

show debug stripcl

No

show debug system

No

show debug tamnw

No

show debug tamnw bypass

No

show debug track

No

show debug track bypass

No

show debug ttyd

No

show debug ufdm

No

show debug ufdm bypass

No

show debug usdk

No

show debug vdc

No

show debug vdc bypass

No

show debug virtual-service

No

show debug vlan

No

show debug vlan bypass

No

show debug vmm

No

show debug vsh

No

show debug vshd

No

show debug vtp

No

show debug xbar

No

show debug xml server

No

show debug xml server session logging level

Yes

show debug-filter { bgp | ip bgp }

No

show debug-filter { igmp | ip igmp }

No

show debug-filter { ospf | ip ospf }

No

show debug-filter { pim | ip pim }

No

show debug-filter all

No

show debug-filter arp

No

show debug-filter fabric forwarding

No

show debug-filter ip mrouting

No

show debug-filter ipv6 icmp

No

show debug-filter ipv6 mrouting

No

show debug-filter l2fwder

No

show debug-filter l2pt

No

show debug-filter rip

No

show debug-filter rpm

No

show default-interface log

No

show diagnostic bootup level

Yes

show diagnostic content module { all | <module> }

Yes

show diagnostic description module <module> test { all | <name> | <test-id> }

Yes

show diagnostic events [ error | info ]

No

show diagnostic internal device_test [ event-history ] errors

No

show diagnostic internal device_test [ event-history ] msgs

No

show diagnostic internal device_test mem-stats [ uuid <i0> ] [ device_test-only ] [ detail ]

No

show diagnostic internal device_test module { all | <module> } history

No

show diagnostic internal diagclient [ event-history ] errors

No

show diagnostic internal diagclient [ event-history ] msgs

No

show diagnostic internal diagclient [ event-history ] trace

No

show diagnostic internal diagclient info

No

show diagnostic internal diagclient mem-stats [ detail ]

No

show diagnostic internal diagclient module { all | <module> } history

No

show diagnostic internal diagmgr [ event-history ] errors

No

show diagnostic internal diagmgr [ event-history ] msgs

No

show diagnostic internal diagmgr [ event-history ] trace

No

show diagnostic internal diagmgr mem-stats [ detail ]

No

show diagnostic internal diagmgr module { all | <module> } history

No

show diagnostic internal port_lb [ event-history ] errors

No

show diagnostic internal port_lb [ event-history ] errors module { <module> }

No

show diagnostic internal port_lb [ event-history ] msgs

No

show diagnostic internal port_lb [ event-history ] trace

No

show diagnostic internal port_lb [ event-history ] trace module { <module> }

No

show diagnostic internal port_lb info

No

show diagnostic internal port_lb mem-stats [ detail ]

No

show diagnostic internal port_lb module { all | <module> } history

No

show diagnostic internal port_lb PortLoopback module { all | <module> } fsm

No

show diagnostic internal port_lb PortLoopback module { all | <module> } history

No

show diagnostic internal port_lb RewriteEngineLoopback module { all | <module> } fsm

No

show diagnostic internal port_lb RewriteEngineLoopback module { all | <module> } history

No

show diagnostic internal port_lb SnakeLoopback module { all | <module> } fsm

No

show diagnostic internal port_lb SnakeLoopback module { all | <module> } history

No

show diagnostic ondemand setting

Yes

show diagnostic result module <module> [ test { <name> | <test-id> } ] { [ detail ] | [ statistics ] }

Yes

show diagnostic result module all [ detail ]

Yes

show diagnostic simulation module <module>

Yes

show diagnostic status module <module>

Yes

show diff rollback-patch { src-checkpoint <chkpoint_name> | src-running-cfg | src-startup-cfg | src-file <srcfile_uri> } { dst-checkpoint <chkpoi

Yes

show dot1q-tunnel

Yes

show dot1q-tunnel interface <ifid_eth_dot1q_tunnel>

Yes

show eemtest internal eem-state

No

show email

Yes

show encryption service stat

Yes

show environment [ fan [ detail1 ] | power [ detail ] [ ampere ] [ input ] | temperature [ module <module> | <s0> <santa-cruz-range> | psu ] ]

Yes

show eol status

No

show errdisable { detect | recovery }

Yes

show errdisable flap

No

show event manager environment { all | <varname> }

Yes

show event manager event-types [ all | <event-type-name> ] [ module <module-id> ]

Yes

show event manager events action-log [ policy <policy-name> | event-type <event-type-name> ]

No

show event manager history events [ detail ] [ maximum <n-events> ] [ severity <sev> ]

Yes

show event manager internal clients [ all ] [ module <module-id> ]

No

show event manager internal evmc debug counters

No

show event manager internal evmc errors

No

show event manager internal evmc mem-stats [ detail ]

No

show event manager internal evmc msgs

No

show event manager internal evms debug counters

No

show event manager internal evms errors

No

show event manager internal evms mem-stats [ detail ]

No

show event manager internal evms msgs

No

show event manager internal mvsh mem-stats [ detail ]

No

show event manager internal publisher sap <sapnum> [ module <module-id> ]

No

show event manager policy internal [ <policy-name> | inactive ]

No

show event manager policy-state <name> [ module <module-id> ]

Yes

show event manager script system { all | <script-name> }

Yes

show event manager system-policy [ all | <policy-name> ]

Yes

show event-history

No

show event-history xbar

No

show fabric database dci [ { vrf { <vrf-name> | <vrf-known-name> } [ peer-id <peer-ip-address> ] [ detail ] } ]

Yes

show fabric database dci [ { vrf <vrf-name> [ peer-id <peer-ip-address> ] [ detail ] } ]

No

show fabric database host [ detail ] [ { vni <vni-id> } | { dot1q <vlan-id> } ]

Yes

show fabric database host [ detail ] [ { vni <vni-id> } | { dot1q <vlan-id> } ] [ internal ]

Yes

show fabric database host [ detail ] [ { vni <vni-id> } | { dot1q <vlan-id> } ] internal

No

show fabric database host statistics

Yes

show fabric database host statistics

Yes

show fabric database host summary

Yes

show fabric database host summary

Yes

show fabric database internal profile-data

No

show fabric database profile-map { global | [ <id> | interface <interface-id> ] }

Yes

show fabric database profile-map { global | [ <id> | interface <interface-id> ] }

Yes

show fabric database statistics [ type { network | profile | cabling | partition | bl-dci } ]

Yes

show fabric forwarding host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ]

Yes

show fabric forwarding internal { ip | ipv6 } dup-host [ { vrf { <vrf-name> | <vrf-known-name> | all } } ]

No

show fabric forwarding internal af [ { vrf { <vrf-name> | <vrf-known-name> | all } } ]

No

show fabric forwarding internal buffers [ vPC ]

No

show fabric forwarding internal clients

No

show fabric forwarding internal debug

No

show fabric forwarding internal event-history { errors | msgs | trace | events | packets | ha | periodic | auto-config | test }

No

show fabric forwarding internal intf { local-host-db | remote-host-db } [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <interface> ]

No

show fabric forwarding internal ip local-host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <ip-prefix> ]

No

show fabric forwarding internal ipv6 local-host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <ipv6-prefix> ]

No

show fabric forwarding internal mac-bd local-host-db [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <mac-addr> <bd> ]

No

show fabric forwarding internal mem-stats [ all ] [ detail ]

No

show fabric forwarding internal migration-vips [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <svi-intf> ]

No

show fabric forwarding internal sdb

No

show fabric forwarding internal state

No

show fabric forwarding internal state vPC

No

show fabric forwarding internal svi-info [ <svi-intf> ]

No

show fabric forwarding internal topo-info [ <topo-id> | stale ]

No

show fabric forwarding internal work-info

No

show fabric forwarding ip { { local-host-db | remote-host-db | aggregate-subnet-prefix } [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <ip-prefix

Yes

show fabric forwarding ipv6 { { local-host-db | remote-host-db | aggregate-subnet-prefix } [ { vrf { <vrf-name> | <vrf-known-name> | all } } ] [ <ipv6-pr

Yes

show fabric forwarding statistics conversational-learning [ ip | ipv6 ] { source-limit [ <ip-prefix> | <ipv6-prefix> ] | max-conversation-limit | port-li

Yes

show fc2 bind

No

show fc2 classf

No

show fc2 exchange

No

show fc2 exchresp

No

show fc2 flogi

No

show fc2 internal cmdcode

No

show fc2 internal cpuhog

No

show fc2 internal cpuperiod

No

show fc2 internal cputimer

No

show fc2 internal debugmon

No

show fc2 internal dest_index

No

show fc2 internal device

No

show fc2 internal event-history errors

No

show fc2 internal event-history filt_msg

No

show fc2 internal event-history log_errors

No

show fc2 internal event-history msgs

No

show fc2 internal fc2_tx_enable

No

show fc2 internal flag

No

show fc2 internal fragsize

No

show fc2 internal maxrxbuffer

No

show fc2 internal memory_usage

No

show fc2 internal pid_tx

No

show fc2 internal platform

No

show fc2 internal plogi

No

show fc2 internal reason_code

No

show fc2 internal rxmaxpacket

No

show fc2 internal rxmaxsequence

No

show fc2 internal sockqueue <i0>

No

show fc2 internal tstmpvalid

No

show fc2 internal txmaxsequence

No

show fc2 nport

No

show fc2 plogi

No

show fc2 plogi_pwwn

No

show fc2 port brief

No

show fc2 port drops

No

show fc2 port state

No

show fc2 socket

No

show fc2 sockexch

No

show fc2 socknotify

No

show fc2 socknport

No

show fc2 vsan

No

show fcoe_klm internal event-history errors

No

show fcoe_klm internal event-history msgs

No

show fcoe_klm internal flag

No

show fcoe_klm internal platform

No

show feature

Yes

show feature-set [ <name> ] [ <id> ]

Yes

show feature-set services <s0>

Yes

show file <uri0> [ cksum | md5sum | sha256sum | sha512sum ]

Yes

show fips status

Yes

show forwarding [ vrf { <vrf-name> | <vrf-known-name> } | table <table_id> ] [ ip | ipv4 ] pss route [ module <module> ]

No

show forwarding [ vrf { <vrf-name> | <vrf-known-name> } | table <table_id> ] ipv6 pss route [ module <module> ]

No

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] adjacency [ mpls ] [ lisp ] [ nve ] [ <aif> ] [ <anh> ] [ detail | s

Yes

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 adjacency [ mpls ] [ <aif> ] [ <anh> ] [ detail | stats | platform ] [ module

Yes

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] [ ip | ipv4 ] { route | rnhdb } [ recursive ] [ summary | detai

Yes

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] [ ip | ipv4 ] security mac [ <addr> ] [ module <module> | vrf {

Yes

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] ipv6 { route | rnhdb } [ recursive ] [ detail | summary | platf

Yes

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> | vlan <vlan_id> ] [ ip | ipv4 ] security group-tag [ <addr> ] [

Yes

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | all } | table <tab_id> ] ipv6 multicast route { [ group { <group> | <group_addr> } | source { <s

Yes

show forwarding [ vrf { <vrf-name> | <vrf-known-name> | all } | table <table_id> ] [ ip | ipv4 ] multicast route [ platform ] { [ group { <gaddr> [ <mas

Yes

show forwarding bypass-hardware [ module <module> ]

No

show forwarding capture [ module <module> ]

Yes

show forwarding distribution [ ip ] multicast route [ table <id> | vrf { <vrf_name> | all } ] [ [ group { <gaddr> [ <mask> ] | <gprefix> } ] [ source { <

Yes

show forwarding distribution { pauz | rezum }

No

show forwarding distribution capture

Yes

show forwarding distribution clients

Yes

show forwarding distribution fib-state

Yes

show forwarding distribution internal counters [ ] [ detail ]

Yes

show forwarding distribution internal counters clear

No

show forwarding distribution internal debugs

No

show forwarding distribution internal error counts

Yes

show forwarding distribution internal errors

No

show forwarding distribution internal info

Yes

show forwarding distribution internal ingress-replication-peer

No

show forwarding distribution internal mem-stats [ detail ]

No

show forwarding distribution internal msgs

No

show forwarding distribution internal multicast download

No

show forwarding distribution internal multicast file-log disable

No

show forwarding distribution internal multicast file-log enable

No

show forwarding distribution internal multicast global_state

No

show forwarding distribution internal multicast hold_queue { line_card_upgrade | sys_upgrade | client_xid | svrf_download_req | all }

No

show forwarding distribution internal multicast primary

No

show forwarding distribution internal multicast secondary

No

show forwarding distribution internal trace events-config

No

show forwarding distribution internal trace events-history

No

show forwarding distribution internal trace ipv6-l3-route-config

No

show forwarding distribution internal trace ipv6-l3-route-history

No

show forwarding distribution internal trace l2-mc-route-config

No

show forwarding distribution internal trace l2-mc-route-history

No

show forwarding distribution internal trace l2-oiflist-config

No

show forwarding distribution internal trace l2-oiflist-history

No

show forwarding distribution internal trace l2-route-config

No

show forwarding distribution internal trace l2-route-history

No

show forwarding distribution internal trace l3-route-config

No

show forwarding distribution internal trace l3-route-history

No

show forwarding distribution internal trace oiflist-config

No

show forwarding distribution internal trace oiflist-history

No

show forwarding distribution internal trace otv oiflist-config

No

show forwarding distribution internal trace otv oiflist-history

No

show forwarding distribution ip igmp snooping [ vlan <vlan-id> [ group [ <grpaddr> | <mac-grpaddr> ] [ source <srcaddr> ] ] ] [ detail ]

Yes

show forwarding distribution ipv6 multicast route [ table <table_id> | vrf <vrf-name> ] [ <group> [ <source> ] | summary ]

Yes

show forwarding distribution l2 multicast [ ip-based | mac-based ] [ vlan <vlan-id> [ { group <grpaddr> [ source <srcaddr> ] } | destination-mac <dmac> ]

Yes

show forwarding distribution lisp counters

Yes

show forwarding distribution lisp vrf enabled

Yes

show forwarding distribution logging [ enable | disable ]

No

show forwarding distribution multicast [ messages ]

Yes

show forwarding distribution multicast { mfib-txlist [ vrf <vrf-name> ] | mfib-buffers }

No

show forwarding distribution multicast client

Yes

show forwarding distribution multicast client-ack-db

Yes

show forwarding distribution multicast download

No

show forwarding distribution multicast internal mem-stats [ detail ]

No

show forwarding distribution multicast outgoing-interface-list { L2 | L3 | OTV } [ <index> ]

Yes

show forwarding distribution multicast resp-ack-timer-msgs

No

show forwarding distribution nve overlay-vlan

Yes

show forwarding distribution otv multicast route [ vlan <vlan-id> ]

Yes

show forwarding distribution peer-id [ vpls | otv ]

Yes

show forwarding distribution test { on | off }

No

show forwarding distribution trace

No

show forwarding dvif primary

No

show forwarding dvif secondary

No

show forwarding ecmp [ { [ vrf { <vrf-name> | <vrf-known-name> } ] lisp } ] [ platform ] [ module <module> ] [ partial ]

Yes

show forwarding ecmp recursive [ platform ] [ max-display-count <display_count> ] [ module <module> ] [ partial ]

Yes

show forwarding file-log disable

No

show forwarding file-log enable

No

show forwarding interfaces [ module <module> ]

Yes

show forwarding internal debugs

No

show forwarding internal error counts [ module <module> ]

Yes

show forwarding internal errors

No

show forwarding internal info

No

show forwarding internal ipfib debugs

No

show forwarding internal l2mcast debugs

No

show forwarding internal l2vpn counters [ clear ] [ module <module> ]

No

show forwarding internal l2vpn trace member-config [ module <module> ]

No

show forwarding internal l2vpn trace member-history [ module <module> ]

No

show forwarding internal mem-stats [ detail ]

No

show forwarding internal message counts [ module <module> ]

Yes

show forwarding internal mpls counters [ clear ] [ module <module> ]

No

show forwarding internal mpls debugs

No

show forwarding internal mpls trace adj-config [ module <module> ]

No

show forwarding internal mpls trace adj-history [ module <module> ]

No

show forwarding internal mpls trace ecmp-config [ module <module> ]

No

show forwarding internal mpls trace ecmp-history [ module <module> ]

No

show forwarding internal mpls trace label-config [ module <module> ]

No

show forwarding internal mpls trace label-history [ module <module> ]

No

show forwarding internal mpls trace te-config [ module <module> ]

No

show forwarding internal mpls trace te-history [ module <module> ]

No

show forwarding internal msgs

No

show forwarding internal multicast counts [ module <module> vdc <vdc_id> ]

Yes

show forwarding internal multicast counts clear [ module <module> vdc <vdc_id> ]

No

show forwarding internal multicast debugs

No

show forwarding internal multicast pd debugs

No

show forwarding internal nve ir-peer

No

show forwarding internal pss disable

No

show forwarding internal pss enable

No

show forwarding internal received nexthops [ module <module> ]

No

show forwarding internal trace bt-queue { v4-pfx | v6-pfx | v4-adj | v6-adj | v4-rnh | v6-rnh | vobj | labels | ecmp | mpls-ecmp | mpls-adj | te | otv-

No

show forwarding internal trace ecmp-config [ module <module> ]

No

show forwarding internal trace ecmp-history [ module <module> ]

No

show forwarding internal trace mfib oif-config [ module <module> ]

No

show forwarding internal trace mfib oif-history [ module <module> ]

No

show forwarding internal trace mfib oiflist-config [ module <module> ]

No

show forwarding internal trace mfib oiflist-history [ module <module> ]

No

show forwarding internal trace mfib otv oif-config [ module <module> ]

No

show forwarding internal trace mfib otv oif-history [ module <module> ]

No

show forwarding internal trace mfib otv oiflist-config [ module <module> ]

No

show forwarding internal trace mfib otv oiflist-history [ module <module> ]

No

show forwarding internal trace mfib otv v4-route-config [ module <module> ]

No

show forwarding internal trace mfib otv v4-route-history [ module <module> ]

No

show forwarding internal trace mfib otv v6-route-config [ module <module> ]

No

show forwarding internal trace mfib otv v6-route-history [ module <module> ]

No

show forwarding internal trace mfib platform oiflist-config [ module <module> ]

No

show forwarding internal trace mfib platform oiflist-history [ module <module> ]

No

show forwarding internal trace mfib v4-route-config [ module <module> ]

No

show forwarding internal trace mfib v4-route-history [ module <module> ]

No

show forwarding internal trace mfib v6-route-config [ module <module> ]

No

show forwarding internal trace mfib v6-route-history [ module <module> ]

No

show forwarding internal trace nve-ir-peer-history [ module <module> ]

No

show forwarding internal trace nve-l3-vni-history [ module <module> ]

No

show forwarding internal trace nve-peer-history [ module <module> ]

No

show forwarding internal trace otv-adj-config [ module <module> ]

No

show forwarding internal trace otv-adj-history [ module <module> ]

No

show forwarding internal trace otv-vlan-config [ module <module> ]

No

show forwarding internal trace otv-vlan-history [ module <module> ]

No

show forwarding internal trace v4-adj-config [ module <module> ]

No

show forwarding internal trace v4-adj-history [ module <module> ]

No

show forwarding internal trace v4-pfx-config [ module <module> ]

No

show forwarding internal trace v4-pfx-history [ module <module> ]

No

show forwarding internal trace v4-rnh-config [ module <module> ]

No

show forwarding internal trace v4-rnh-history [ module <module> ]

No

show forwarding internal trace v6-adj-config [ module <module> ]

No

show forwarding internal trace v6-adj-history [ module <module> ]

No

show forwarding internal trace v6-pfx-config [ module <module> ]

No

show forwarding internal trace v6-pfx-history [ module <module> ]

No

show forwarding internal trace v6-rnh-config [ module <module> ]

No

show forwarding internal trace v6-rnh-history [ module <module> ]

No

show forwarding internal trace vobj-config [ module <module> ]

No

show forwarding internal trace vobj-history [ module <module> ]

No

show forwarding internal trace-profile debugs

No

show forwarding internal tracing disable

No

show forwarding internal tracing enable

No

show forwarding internal ufib funcstats disable

No

show forwarding internal ufib funcstats enable

No

show forwarding internal unicast counts [ detail ] [ vdc { <vdc_id> | all } ] [ module <module> ]

Yes

show forwarding internal unicast debugs

No

show forwarding kvfib cache { on | off }

No

show forwarding l2 multicast { [ { vlan <vlan-id> [ { group <grpaddr> source <srcaddr> } | destination-mac <dstmac> ] } ] } [ vdc <vdc-id> ] [ module

Yes

show forwarding l2vpn ipv6 multicast route [ [ vlan <vlan-id> ] | [ softwarebd <software-bd> ] ] [ module <module> ]

No

show forwarding l2vpn label [ <label_id> ] vpls [ module module ]

Yes

show forwarding l2vpn label [ <label_id> ] xconnect [ module module ]

Yes

show forwarding l2vpn multicast outgoing-interface-list [ index <oiflist-index> ]

No

show forwarding l2vpn multicast route [ [ vlan <vlan-id> ] | [ softwarebd <software-bd> ] ] [ module <module> ]

No

show forwarding l2vpn service vpls { { service_id { <service_id> | all } } | { vlan { <vlan_id> | vlan_all } } | { peer { { interface <intf-name> | nex

No

show forwarding l2vpn service xconnect { service_id { <service_id> | all } } [ module <module> ] [ detail ]

No

show forwarding l2vpn vlan [ <vlan_id> ] [ module <module> ]

Yes

show forwarding mpls [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } [ label <label-id> | <prefix> | <v6prefix> ] | table <table_id> [ label <label-

Yes

show forwarding mpls aggregate [ label { <label-id> | all } ] [ detail ] [ module <module> ]

Yes

show forwarding mpls cbts [ module <module> ]

Yes

show forwarding mpls drop-stats [ platform ]

Yes

show forwarding mpls ecmp [ module <module> ] [ platform ]

Yes

show forwarding mpls summary [ module <module> ]

Yes

show forwarding mpls te [ <te_if> ] [ detail ] [ module <module> ]

Yes

show forwarding multicast outgoing-interface-list { L2 | L3 } [ platform ] [ module <module> ] [ <index> ]

Yes

show forwarding nve l2 ingress-replication-peers [ <peer_ip> ]

No

show forwarding nve l3 adjacency tunnel <tunnel_id> [ bd <bd_id> | table <table_id> | detail | module <num> ] +

No

show forwarding nve l3 peers [ peers <peer_id> | tunnel <tunnel_id> | detail | module <num> ] +

Yes

show forwarding otv <intf> [ peer <peer-id> ] [ module <module> ]

Yes

show forwarding otv ipv6 multicast route [ vlan <vlan_id> ] [ module <module> ]

Yes

show forwarding otv multicast outgoing-interface-list

Yes

show forwarding otv multicast route [ [ vlan <vlan-id> ] | [ softwarebd <software-bd> ] ] [ module <module> ]

Yes

show forwarding otv vlan [ <vlan_id> ] [ module <module> ]

Yes

show forwarding restart [ module <module> ]

No

show forwarding test { on | off } [ module <module> ]

No

show forwarding trace [ clear ] [ module <module> ]

Yes

show forwarding trace profile

No

show forwarding trace profile funcstats [ enable | disable ] [ module <module> ]

Yes

show guestshell [ { detail } ]

Yes

show hardware

Yes

show hardware [ forwarding ] ip verify [ module <module> ]

Yes

show hardware access-list labels <label-type> <hw-label> [ module <module> ]

No

show hardware access-list lou resource threshold

Yes

show hardware access-list resource pooling

Yes

show hardware access-list tcam { { template { nfe | nfe2 | l2-l3 | l3 | <name> | all } } | { region } }

Yes

show hardware capacity

No

show hardware capacity eobc

Yes

show hardware capacity fabric-utilization

No

show hardware capacity forwarding

No

show hardware capacity interface

Yes

show hardware capacity module

Yes

show hardware capacity power

Yes

show hardware fabricpath mac-learning module <module>

Yes

show hardware feature-capability [ detailed ]

Yes

show hardware forwarding interface statistics mode

Yes

show hardware forwarding memory health detail

No

show hardware forwarding memory health summary

No

show hardware internal access-list lookup { { { { src-ip <sa-ip> dst-ip <da-ip> } | { src-ipv6 <v6sa> dst-ipv6 <v6da> } } protocol <proto> l4-sr

No

show hardware internal bootflash model

No

show hardware internal buffer info pkt-stats [ module <module> ] [ instance <instance> ] [ brief | { [ peak ] [ detail ] } | port-stuck-log [ [ as

Yes

show hardware internal buffer info pkt-stats input [ module <module> ] [ instance <instance> ] [ peak ] [ detail ]

Yes

show hardware internal buffer poll-interval [ module <module> ]

No

show hardware internal cpu interface asic counters module <module> instance <instance>

No

show hardware internal cpu-mac eobc counters

No

show hardware internal cpu-mac eobc registers

No

show hardware internal cpu-mac eobc stats

No

show hardware internal cpu-mac inband active-fm traffic-from-sup

No

show hardware internal cpu-mac inband active-fm traffic-to-sup

No

show hardware internal cpu-mac inband counters

No

show hardware internal cpu-mac inband registers

No

show hardware internal cpu-mac inband stats

No

show hardware internal cpu-mac mgmt counters

No

show hardware internal cpu-mac mgmt registers

No

show hardware internal cpu-mac mgmt stats

No

show hardware internal dev-port-map

No

show hardware internal dev-version

No

show hardware internal dev-version details

No

show hardware internal eobc stats

No

show hardware internal errors { module <module> | all }

Yes

show hardware internal errors2

Yes

show hardware internal fabric interface asic counters module <module>

No

show hardware internal fabric interface asic counters module <module> instance <instance> asic-port <port> [ snmp ]

No

show hardware internal forwarding adjacency statistics default-route [ module <module> ]

No

show hardware internal forwarding adjacency utilization [ no-header ] [ module <module> ] [ instance <instance> ]

Yes

show hardware internal forwarding l2 table utilization [ instance { <instance_number> | all } ] [ no-header ] [ module <num> ]

Yes

show hardware internal forwarding l3 counters [ module <module> ]

No

show hardware internal forwarding table utilization [ no-header ] [ module <module> ] [ instance <instance> ]

Yes

show hardware internal forwarding table utilization mib module <module>

Yes

show hardware internal inband-rcpu cpu-queue [ name <queue-name> ] slot <slot-num> [ reset-stats ] [ reset-pps ]

No

show hardware internal interface <ifeth_ctr_hw> asic counters [ snmp ]

No

show hardware internal interface asic counters module <module>

No

show hardware internal logflash model

No

show hardware internal memory-ecc statistics

No

show hardware internal memory-model

No

show hardware internal mgmt0 stats

No

show hardware internal ns buffer info pkt-stats [ input ] [ module <module> ] [ instance <instance> ] [ detail ]

Yes

show hardware internal ns interrupts

Yes

show hardware internal plog errors

No

show hardware internal plog msgs

No

show hardware internal plog print [ file-type <filetype> [ { count <count> } | { uuid <uuid> } ] ]

No

show hardware internal plog print list-file-types

No

show hardware internal plog stat uuid <uuid>

No

show hardware internal proc-info <s0>

No

show hardware internal sensor event-history errors

No

show hardware internal sensor event-history msgs

No

show hardware internal sensor mem-stats [ detail ]

No

show hardware internal sprom event-log

No

show hardware internal statistics module <module> pktflow all

No

show hardware internal statistics module <module> pktflow rates

No

show hardware internal statistics module <module> rates

No

show hardware internal statistics module-all pktflow all

No

show hardware internal statistics module-all pktflow rates

No

show hardware internal statistics module-all rates

No

show hardware internal statistics pktflow all

No

show hardware internal statistics pktflow rates

No

show hardware internal statistics rates

Yes

show hardware internal tah interface <if_name>

No

show hardware internal tah l3 v4lpm

No

show hardware internal tah l3 v6lpm

No

show hardware internal version

Yes

show hardware mac address-table <module> [ static | dynamic ] [ address <mac-addr> | interface <interface-name> | vlan <id> | vdc <vdc> | fe <feid> ] + [

Yes

show hardware profile status [ module <module> ] [ detail ]

Yes

show hardware profile tcam region

Yes

show hardware qos burst-detect max-records

Yes

show hardware qos eoq stats-class [ module <module> ]

Yes

show hardware qos include ipg [ module <module> ]

Yes

show hardware qos ing-pg-hdrm-reserve [ module <module> ]

Yes

show hardware qos ing-pg-no-min [ module <module> ]

Yes

show hardware qos ing-pg-share [ module <module> ]

Yes

show hardware qos min-buffer [ module <module> ]

Yes

show hardware qos ns-buffer-profile [ module <module> ]

Yes

show hardware qos ns-mcq3-alias [ module <module> ]

Yes

show hardware rate-limiter [ module <module> ] [ layer-3 { <l3-opts> | multicast <mcast-opts> } | layer-2 <l2-opts> | <opts> | f1 <f1-opts> ]

Yes

show hardware rl snmp class-id <class-id>

Yes

show hardware rl snmp global class-id <class-id>

Yes

show hardware rl snmp local snmp-index <snmp-index> class-id <class-id>

Yes

show hosts

Yes

show ieth-header-decode <ieth>

No

show inactive-if-config log

No

show incompatibility { system <uri0> | nxos <uri1> }

Yes

show incompatibility-all { system <uri0> | nxos <uri1> }

Yes

show install { inactive | active [ brief ] | committed }

Yes

show install all failed-standby

Yes

show install all failure-reason

Yes

show install all impact [ nxos <uri> ] + [ non-disruptive ]

No

show install all impact epld <uri1>

No

show install all status

No

show install epld status

No

show install impact <uri0>

No

show install impact <uri0> <uri1>

No

show install impact <uri0> detail

No

show install log { [ <id> | from <id1> ] [ detail ] [ reverse ] | [ last ] }

Yes

show install packages

Yes

show install patches

Yes

show install pkg-info <pname>

Yes

show_interface <single>

No

show interface [ <if_list> ] priority-flow-control [ detail ] [ module <module> ]

Yes

show interface [ <if_list> ] priority-flow-control [ detail ] [ module <module> ]

Yes

show interface [ controller | quick ]

Yes

show interface <ifeth_brf> brief

Yes

show interface <ifeth_ctr_brf> counters brief [ <counter_val> ]

Yes

show interface <ifeth_ctr_dtl_all> counters detailed all [ snmp ]

Yes

show interface <ifeth_ctr_dtl> counters detailed [ snmp ]

Yes

show interface <ifeth_ctr_errs> counters errors [ snmp ]

Yes

show interface <ifeth_ctr_stm_ctrl> counters storm-control

Yes

show interface <ifeth_ctr_trnk> counters trunk

Yes

show interface <ifeth_ctr> counters [ snmp ]

Yes

show interface <ifeth_dbnc> debounce

Yes

show interface <ifeth_errdis> status err-disabled

Yes

show interface <ifeth_errvlans> status err-vlans

Yes

show interface <ifeth_fcoe> fcoe

Yes

show interface <ifeth_fl_ctrl> flowcontrol

Yes

show interface <ifeth_status> status

Yes

show interface <ifeth_swtch> switchport

Yes

show interface <ifeth_trans> transceiver fex-fabric [ calibrations | details ]

Yes

show interface <ifeth_trnk> trunk

Yes

show interface <ifeth> [ quick ]

Yes

show interface <ifid_ctr_dtl_all> counters detailed all [ snmp ]

No

show interface <ifid_ctr> counters [ snmp ]

Yes

show interface <ifid_eth_cap> capabilities

Yes

show interface <ifid_eth> description

Yes

show interface <ifid_macaddr> mac-address

Yes

show interface <ifid_mgmt_loop> description

Yes

show interface <ifid_status> status

Yes

show interface <ifid_tdr> cable-diagnostics-tdr

Yes

show interface <ifid_transceiver> transceiver [ calibrations | details | sprom ]

Yes

show interface <ifid> [ brief | quick ]

Yes

show interface <ifindex> vlan mapping

Yes

show interface <ifloop_brf> brief

Yes

show interface <ifloop_ctr_dtl_all> counters detailed all

Yes

show interface <ifloop_ctr_dtl> counters detailed

Yes

show interface <ifloop>

Yes

show interface <ifmgmt_brf> brief

Yes

show interface <ifmgmt_ctr_dtl_all> counters detailed all

Yes

show interface <ifmgmt_ctr_dtl> counters detailed

Yes

show interface <ifmgmt>

Yes

show interface <ifpch_brf> brief

Yes

show interface <ifrange>

Yes

show interface <ifrange>

Yes

show interface <ifrange> brief

Yes

show interface <ifrange> brief

Yes

show interface <ifrange> counters

Yes

show interface <ifrange> counters

Yes

show interface <ifrange> counters detailed all [ snmp ]

Yes

show interface <ifrange> description

Yes

show interface <ifrange> description

Yes

show interface <ifrange> status [ err-disabled ]

Yes

show interface <ifrange> status [ err-disabled ]

Yes

show interface <iftun_desc>

Yes

show interface <iftun_desc> description

Yes

show interface <iftun_status> status [ err-disabled ]

Yes

show interface <iftunnel_brf> brief

Yes

show interface <loop_ctr_errs> counters errors

No

show interface brief [ controller | cli ]

Yes

show interface capabilities

Yes

show interface counters

Yes

show interface counters [ module <module> ]

Yes

show interface counters brief [ <counter_val> ]

Yes

show interface counters detailed [ snmp ]

Yes

show interface counters detailed all [ snmp ]

Yes

show interface counters errors [ module <module> ]

Yes

show interface counters snmp [ module <module> ]

Yes

show interface counters storm-control [ module <module> ]

Yes

show interface counters table [ verbose ]

No

show interface debounce

Yes

show interface description

Yes

show interface flowcontrol [ module <module> ]

Yes

show interface hardware-mappings

No

show interface mac-address

Yes

show interface pruning

Yes

show interface snmp-ifindex

Yes

show interface status [ down | inactive | module <module> | up | auto-column ]

Yes

show interface status err-disabled

Yes

show interface status err-vlans

Yes

show interface switchport

Yes

show interface transceiver [ calibrations | details | inventory ]

Yes

show interface transceiver fex-fabric [ calibrations | details ]

Yes

show interface trunk [ module <module> | vlan <vlan_id> | fex <fex_num> ]

Yes

show interface untagged-cos [ module <mod_num> ]

Yes

show inventory [ chassis | fans | power_supply | module [ <module> ] | <s0> [ <santa-cruz-range> ] | all ]

Yes

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901

No

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901

No

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901

No

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901

No

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901

No

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901

No

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901

No

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901

No

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901

No

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | { bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901

No

show ip { mbgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] | bgp [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_01234567890123

No

show ip adjacency [ <interface> [ summary ] | <ip-addr> [ non-best | detail ] | detail | summary | non-best | [ throttle ] statistics ] [ vrf { <vrf-name>

Yes

show ip arp [ [ [ <ip-address> | [ sync-entries | fhrp-non-active-learn ] [ detail ] | static | summary | [ summary ] <interface> ] ] [ vrf { <vrf-name> |

Yes

show ip arp anycast topo-info [ <topo-id> ]

No

show ip arp cache { { brief | detail } | { interface [ <intf> ] } } [ operational ]

No

show ip arp client

Yes

show ip arp controller-statistics

No

show ip arp internal { library-info | fastboot-cache }

No

show ip arp internal { mem-stats [ shared | all ] [ no-libs ] [ detail ] }

No

show ip arp internal buffers [ { [ all <count> ] [ free <count> ] } ]

No

show ip arp internal event-history { packet | errors | msgs | event | sync-event | ip-sync-event | control | ha | lcache | lcache-errors | cli | client-e

No

show ip arp internal event-history buffer-size { packet | errors | event | sync-event | ip-sync-event | control | ha | lcache | lcache-errors | cli | cli

No

show ip arp internal hmm statistics [ detail ]

No

show ip arp internal info [ interface <interface> ]

No

show ip arp off-list [ { vlan | bdi } <vlan-id> ]

Yes

show ip arp open-flow error-statistics

No

show ip arp snmp pttree { static | dynamic | virtual | typeall } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

No

show ip arp statistics [ <interface> ] [ interface-all ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip arp suppression topo-info [ <topo-id> ]

No

show ip arp suppression-cache { detail [ vlan <vlan_id> ] | summary | statistics | vlan <vlan_id> | local [ vlan <vlan_id> ] | remote [ vlan <vlan_id> ] }

Yes

show ip arp tunnel-statistics

Yes

show ip arp vaddr

No

show ip arp vpc-statistics

Yes

"show ip as-path-access-list [ ""<aspl-name>"" | <aspl-cfg-name> ] "

Yes

show ip cache { { brief | detail } | { interface [ <intf> ] } } [ operational ]

No

show ip client [ <client-name> ]

Yes

show ip community-list [ <cl_name> ]

Yes

show ip debug

No

show ip dns source-interface [ vrf { <vrf-name> | <vrf-known-name> } ]

Yes

show ip dns source-interface vrf all

Yes

show ip extcommunity-list [ <extcl_name> ]

Yes

show ip fib adjacency [ <aif> ] [ <anh> ] [ module <module> ]

Yes

show ip fib distribution [ pauz | rezum ]

No

show ip fib distribution capture

Yes

show ip fib distribution clients

Yes

show ip fib distribution internal error counts

Yes

show ip fib distribution mroute [ { <group> | <gprefix> } [ <source> ] ] [ table <id> ]

Yes

show ip fib distribution multicast [ messages ]

Yes

show ip fib distribution multicast outgoing-interface-list { L2 | L3 | OTV } [ <index> ]

Yes

show ip fib distribution state

Yes

show ip fib interfaces [ module <module> ]

Yes

show ip fib internal error counts [ module <module> ]

Yes

show ip fib mroute [ { <group> | <gprefix> } [ <source> ] ] [ table <table-id> ] [ module <module> ]

Yes

show ip fib mroute [ { <group> | <gprefix> } [ <source> ] ] [ table <table-id> ] [ module <module> ]

Yes

show ip fib mroute txlist [ module <module> ]

No

show ip fib route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] [ summary | <prefix> [ longer-prefixes ] | <address> | interf

Yes

show ip fib route [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } | table <table_id> ] [ summary | <prefix> [ longer-prefixes ] | <address> | interf

Yes

show ip fib route recovered

No

show ip ftm statistics

No

show ip ftp source-interface [ vrf { <vrf-name> | <vrf-known-name> } ]

Yes

show ip ftp source-interface vrf all

Yes

show ip http source-interface [ vrf { <vrf-name> | <vrf-known-name> } ]

Yes

show ip http source-interface vrf all

Yes

show ip igmp [ internal ] event-history { errors | msgs | <igmp-event-hist-buf-name> | statistics }

No

show ip igmp { groups | route } [ { <source> [ <group> ] } | { <group> [ <source> ] } ] [ <interface> ] [ summary ] [ vrf { <vrf-name> | <vrf-known-name>

Yes

show ip igmp interface <interface> [ detail ] | show ip igmp interface [ brief ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip igmp interface <interface> [ detail ] | show ip igmp interface [ brief ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip igmp internal

No

show ip igmp internal { errors | iod-cache | pss-dump | flexlink-iod-cache }

No

show ip igmp internal { mrib-txlist [ vrf { <vrf-name> | <vrf-known-name> | all } ] | mrib-buffers }

No

show ip igmp internal { vpc | emulated-switch }

Yes

show ip igmp internal library-info

No

show ip igmp internal mem-stats [ all ] [ no-libs ] [ detail ]

No

show ip igmp internal mrib-cache [ vrf { <vrf-name> | <vrf-known-name> | all } ]

No

show ip igmp internal pim-cache [ vrf { <vrf-name> | <vrf-known-name> | all } ]

No

show ip igmp local-groups [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip igmp policy statistics reports [ <interface> ]

No

show ip igmp snooping [ { vlan <vlan> | bridge-domain <bdid> } ]

Yes

show ip igmp snooping [ { vlan <vlan> | bridge-domain <bdid> } ]

Yes

show ip igmp snooping [ internal ] event-history { statistics | <igmp-snoop-event-hist-buf-name> }

No

show ip igmp snooping [ otv ] groups [ { <source> [ <group> ] } | { <group> [ <source> ] } ] [ vlan <vlan> ] [ detail ] [ summary ]

Yes

show ip igmp snooping { report-policy | access-group } statistics [ vlan <vlan> ]

No

show ip igmp snooping explicit-tracking [ vlan <vlan> | bridge-domain <bdid> ] [ ] [ detail ]

Yes

show ip igmp snooping internal { ha | mfdm | ribs | route-txlist | memory }

No

show ip igmp snooping internal proxy-querier

No

show ip igmp snooping lookup-mode [ vlan <vlan> ]

Yes

show ip igmp snooping mac-oif [ vlan <vlan> ] [ detail ]

Yes

show ip igmp snooping mrouter [ otv ] [ vlan <vlan> | bridge-domain <bdid> ] [ detail ]

Yes

show ip igmp snooping otv vlan brief

Yes

show ip igmp snooping pw vlan brief

Yes

show ip igmp snooping querier [ vlan <vlan> | bridge-domain <bdid> ] [ detail ]

Yes

show ip igmp snooping snmp mib adminMode

Yes

show ip igmp snooping snmp mib aliasingMode

Yes

show ip igmp snooping snmp mib cisV3ProcessEnableOperStatus

Yes

show ip igmp snooping snmp mib explicitTrackingTable [ vlan <cisVlanIndex-in> ]

Yes

show ip igmp snooping snmp mib fallBackTime

Yes

show ip igmp snooping snmp mib fastBlockEnabled

Yes

show ip igmp snooping snmp mib fastleaveenabled

Yes

show ip igmp snooping snmp mib filterStatsTable [ interface <ifIndex-in> vlan <cisFilterStatsVlanNumber-in> ]

Yes

show ip igmp snooping snmp mib ifAccessGroupTable [ interface <ifIndex-in> vlan <cisIfAccessGroupVlan-in> ]

Yes

show ip igmp snooping snmp mib ifConfigTable [ interface <ifIndex-in> ]

Yes

show ip igmp snooping snmp mib ifLimitTable [ interface <ifIndex-in> vlan <cisIfLimitVlanNumber-in> ]

Yes

show ip igmp snooping snmp mib ifLimitTotalTable [ interface <ifIndex-in> ]

Yes

show ip igmp snooping snmp mib igmpsnoopingenabled

Yes

show ip igmp snooping snmp mib iterfaceStatsTable [ interface <ifIndex-in> ]

Yes

show ip igmp snooping snmp mib lastMemeberQueryCount

Yes

show ip igmp snooping snmp mib lastMemeberQueryInterval

Yes

show ip igmp snooping snmp mib leaveQueryType

Yes

show ip igmp snooping snmp mib mcastGroupTable [ vlan <cisMcastGroupVlanIndex-in> <cisMcastGroupAddressType-in> <cisMcastGroupAddress-in> ]

Yes

show ip igmp snooping snmp mib mcastRouterCfgTable [ interface <ifIndex-in> vlan <cisMcastRouterVlanIndex-in> ]

Yes

show ip igmp snooping snmp mib mcastRouterConfigTable [ vlan <cisMcastRouterConfigVlanIndex-in> interface <ifIndex-in> ]

Yes

show ip igmp snooping snmp mib multicastGroupConfigTable [ vlan <cisMulticastGroupConfVlanIndex-in> <cisMulticastGroupConfCeVlanIndex-in> <cisMulticastGr

Yes

show ip igmp snooping snmp mib multicastGroupPortListTable [ vlan <cisMulticastGroupVlanIndex-in> <cisMulticastGroupCeVlanIndex-in> <cisMulticastGroupAdd

Yes

show ip igmp snooping snmp mib multicastGroupTable [ vlan <cisMulticastGroupVlanIndex-in> <cisMulticastGroupCeVlanIndex-in> <cisMulticastGroupAddressType

Yes

show ip igmp snooping snmp mib operMode

Yes

show ip igmp snooping snmp mib querierTable [ vlan <cisIgmpQuerierVlanIndex-in> ]

Yes

show ip igmp snooping snmp mib reportsuppressionenabled

Yes

show ip igmp snooping snmp mib robustnessVariable

Yes

show ip igmp snooping snmp mib routerAlertCheckEnabled

Yes

show ip igmp snooping snmp mib sourceOnlyEntryAgingTime

Yes

show ip igmp snooping snmp mib sourceOnlyLearningEnabled

Yes

show ip igmp snooping snmp mib tcnFloodQueryCount

Yes

show ip igmp snooping snmp mib timeToLiveCheckEnabled

Yes

show ip igmp snooping snmp mib topoChanageQuerySolicitEnabled

Yes

show ip igmp snooping snmp mib v3ProcessEnabledAdminStatus

Yes

show ip igmp snooping snmp mib v3SnoopingSupport

Yes

show ip igmp snooping snmp mib vlanconfigtable [ vlan <cisVlanIndex-in> ]

Yes

show ip igmp snooping snmp mib vlanFilterConfigTable [ vlan <cisVlanIndex-in> ]

Yes

show ip igmp snooping statistics [ global | vlan <vlan> | bridge-domain <bdid> ]

Yes

show ip igmp vrf all

Yes

show ip interface { { { brief [ include-secondary ] } | [ <interface> ] | [ <ip-addr> ] } [ operational ] [ vaddr ] [ vrf { <vrf-name> | <vrf-known-name> |

Yes

show ip internal [ api ] context array

No

show ip internal { { mem-stats [ shared | all ] [ no-libs ] [ detail ] } | boot-info }

No

show ip internal { ppf | { { acl | pbr } { status [ detail ] | interface <interface> [ { ingress | egress } ] } } }

No

show ip internal bfd data [ { vrf { <vrf-name> | <vrf-known-name> | all } | interface <interface> } ]

No

show ip internal event-history { errors | msgs | ipc | ha | log | ppf | cli | vrf-errors | arp-miss | snmp | static-rt | lcache-err | lcache-trace | pkt-b

No

show ip internal event-history bfd

No

show ip internal event-history buffer-size { errors | log | ipc | snmp | ha | ppf | cli | vrf-errors | arp-miss | static-rt | pkt-buffer | all }

No

show ip internal hmm

No

show ip internal igmp-snoop-stats

No

show ip internal info [ unnumbered | directed-broadcast ]

No

show ip internal info interface [ iod <if_iod> | <interface> | all ]

No

show ip lisp data-cache [ <eid> ] [ vrf { <vrf-name> | <vrf-known-name> } ]

No

show ip load-sharing

Yes

show ip local-pt [ vrf { <vrf-name> | <vrf-known-name> | all } ]

No

show ip logging [ hash ]

Yes

show ip mroute [ [ bitfield ] [ detail ] | rp | { [ <group> ] summary [ software-forwarded | rpf-failed ] } | { summary [ count | software-forwarded | rp

Yes

show ip multicast vrf [ <vrf-name> | <vrf-known-name> | all ]

Yes

show ip ospf [ <inst> ] policy statistics { { redistribute { { bgp | eigrp } <as> | { isis | ospf | rip } <tag> | static | direct | amt } } | { area <are

Yes

show ip ospf [ <tag> ] [ internal ] event-history { errors | msgs | statistics | adjacency | event | ha | flooding | lsa | spf | redistribution | ldp |

No

show ip ospf [ <tag> ] [ internal ] event-history detail [ statistics ]

No

show ip ospf [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip ospf [ <tag> ] border-routers [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip ospf [ <tag> ] database [ [ [ [ network | asbr-summary | summary | router | opaque-link | opaque-area | nssa-external ] [ area <area-id-ip> ] ] |

Yes

show ip ospf [ <tag> ] database [ [ [ network | asbr-summary | summary | router | opaque-link | opaque-area | nssa-external ] [ area <area-id-ip> ] ] | e

Yes

show ip ospf [ <tag> ] database database-summary [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip ospf [ <tag> ] ha [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip ospf [ <tag> ] interface [ <interface> | vrf { <vrf-name> | <vrf-known-name> | all } ] [ private ]

Yes

show ip ospf [ <tag> ] interface brief [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip ospf [ <tag> ] internal [ errors ] [ area <area-id-ip> ] [ asbrs ] [ externals ] [ flood-indices ] [ if-number-tree ] [ max-metric ] [ as-extern

No

show ip ospf [ <tag> ] internal ha [ vrf { <vrf-name> | <vrf-known-name> | all } ]

No

show ip ospf [ <tag> ] internal library-info

No

show ip ospf [ <tag> ] internal mem-stats [ no-libs ] [ detail ]

No

show ip ospf [ <tag> ] internal missed-traps-statistics

No

show ip ospf [ <tag> ] lsa-content-changed-list { <ip-addr> | <neighbor-name> } <interface>

Yes

show ip ospf [ <tag> ] memory

Yes

show ip ospf [ <tag> ] mpls ldp interface [ <interface> | vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip ospf [ <tag> ] neighbors [ { { <interface> [ <neighbor> | <neighbor-name> ] } | { [ <neighbor> | <neighbor-name> ] [ vrf { <vrf-name> | <vrf-know

Yes

show ip ospf [ <tag> ] neighbors [ <interface> ] [ <neighbor> | <neighbor-name> ] detail [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ private ]

Yes

show ip ospf [ <tag> ] neighbors [ <interface> ] summary [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip ospf [ <tag> ] request-list { <ip-addr> | <neighbor-name> } <interface>

Yes

show ip ospf [ <tag> ] retransmission-list { <routerid> | <router-name> } <interface>

Yes

show ip ospf [ <tag> ] route [ <ip-addr> | <ip-prefix> [ longer-prefixes ] ] [ all_routes ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip ospf [ <tag> ] route [ <ip-prefix> [ longer-prefixes ] ] summary [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip ospf [ <tag> ] sham-links [ brief ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip ospf [ <tag> ] statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip ospf [ <tag> ] summary-address [ private ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip ospf [ <tag> ] traffic [ <interface> [ detail ] | [ detail ] | [ detail ] vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip ospf [ <tag> ] traps-queue

No

show ip ospf [ <tag> ] virtual-links [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip ospf [ <tag> ] virtual-links brief [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip overlay-traffic

No

show ip pim [ internal ] event-history { errors | msgs | <pim-event-hist-buf-name> | statistics }

No

show ip pim bitfield

No

show ip pim config-sanity

No

show ip pim df [ <rp-or-group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ internal ]

Yes

show ip pim fabric info

No

show ip pim fabric legacy-vlans

No

show ip pim group-range [ <group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip pim interface <interface> | show ip pim interface [ brief ] [ internal ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip pim interface <interface> | show ip pim interface [ brief ] [ internal ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip pim internal

No

show ip pim internal { { vpc [ rpf-source [ vrf { <vrf-name> | <vrf-known-name> | all } ] ] } | emulated-switch }

Yes

show ip pim internal { library-info | iod-cache }

No

show ip pim internal errors

No

show ip pim internal interface-txlist vrf [ <vrf-known-name> | all ]

No

show ip pim internal mem-stats [ shared | all ] [ no-libs ] [ detail ]

No

show ip pim internal pss-dump [ df-states | interfaces | rp | auto-rp | bsr ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

No

show ip pim lisp encap

No

show ip pim mdt [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip pim mdt bgp [ mdt-source <src-addr> ]

No

show ip pim mdt history interval <min> [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip pim mdt receive [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip pim mdt send [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip pim neighbor { [ <interface> ] | [ <ipaddr> ] } [ detail | internal ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip pim oif-list <group> [ <source> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip pim policy statistics { jp-policy | neighbor-policy } <interface>

No

show ip pim policy statistics { register-policy | bsr { bsr-policy | rp-candidate-policy } | auto-rp { rp-candidate-policy | mapping-agent-policy } } [ v

No

show ip pim route { [ bitfield ] | <source> <group> | <group> [ <source> ] [ bitfield ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip pim route internal [ <source> <group> | <group> [ <source> ] ] { [ detail ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

No

show ip pim rp [ <group> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip pim rp-hash <group> [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip pim statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip pim vrf [ { <vrf-name> | <vrf-known-name> | all } ] [ detail | internal ]

Yes

show ip ping source-interface [ vrf { <vrf-name> | <vrf-known-name> } ]

Yes

show ip ping source-interface [ vrf { <vrf-name> | <vrf-known-name> } ]

Yes

show ip ping source-interface vrf all

Yes

"show ip prefix-list { { [ detail | summary ] [ ""<ipv4-pfl-name>"" | <ipv4-pfl-cfg-name> ] } | { { <ipv4-pfl-name> | <ipv4-pfl-cfg-name> } seq <seq-no> } | "

Yes

show ip process [ api ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip rip [ instance <inst> ] policy statistics redistribute { bgp <as> | { eigrp | isis | <src-rip> | ospf } <tag> | direct | static } [ vrf { <vrf-na

No

show ip router-id [ vrf { <vrf-name> | <vrf-known-name> | all } ]

No

show ip ssh source-interface [ vrf { <vrf-name> | <vrf-known-name> } ]

Yes

show ip ssh source-interface vrf all

Yes

show ip static-route [ multicast ] [ internal ] [ track-table ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ip stats

No

show ip telnet source-interface [ vrf { <vrf-name> | <vrf-known-name> } ]

Yes

show ip telnet source-interface vrf all

Yes

show ip tftp source-interface [ vrf { <vrf-name> | <vrf-known-name> } ]

Yes

show ip tftp source-interface vrf all

Yes

show ip traceroute source-interface [ vrf { <vrf-name> | <vrf-known-name> } ]

Yes

show ip traceroute source-interface vrf all

Yes

show ip traceroute source-interface vrf all

Yes

show ip traffic [ vrf { <vrf-name> | <vrf-known-name> } ]

Yes

show ip txlist { list | member }

No

show ipv6 [ icmp ] mld groups [ { <source> [ <group> ] } | { <group> [ <source> ] } ] [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [

Yes

show ipv6 [ icmp ] mld internal { m6rib-txlist [ vrf { <vrf-name> | <vrf-known-name> | all } ] | m6rib-buffers }

No

show ipv6 [ icmp ] mld internal errors

No

show ipv6 [ icmp ] mld local-groups [ <interface> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ipv6 [ icmp ] mld route internal [ static ] [ vrf { <vrf-name> | <vrf-known-name> } ]

No

show ipv6 [ icmp ] mld vrf all

No

show ipv6 { adjacency | neighbor } [ <interface> [ summary ] | <ipv6-addr> [ detail ] | detail | summary | non-best | [ throttle ] statistics ] [ vrf { <vr

Yes

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] [ <ipv6-prefix> [ longer-prefixes ] ] [ vrf { <vrf-name> |

No

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] { rib-install | rib-uninstall | rib-pending } [ vrf { <vrf-

No

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] community { <regexp-str> | { { <comm-id> | <wellknown-id> }

No

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] dampening { dampened-paths [ regexp <regexp-str> ] | histor

No

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] extcommunity { <regexp-str> | { { 4byteas-generic { transit

No

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] flap-statistics [ <ipv6-prefix> ] [ vrf { <vrf-name> | <vrf

No

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] neighbors { [ { <neighbor-id> | <ipv6-neighbor-id> } [ rout

No

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] nexthop-database [ vrf { <vrf-name> | <vrf-known-name> | AL

No

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] received-paths [ private ] [ vrf { <vrf-name> | <vrf-known-

No

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] regexp <regexp-str> [ vrf { <vrf-name> | <vrf-known-name> |

No

show ipv6 { bgp | mbgp } [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_012345678901234 } ] summary [ vrf { <vrf-name> | <vrf-known-name> | ALL_VRFS_01

No

show ipv6 { bgp | mbgp } { route-map { <rmap-name> | <rmap-name> } | prefix-list { <prfxlist-name> | <test_pol_name> } | filter-list { <fltrlist-name> |

No

show ipv6 { bgp | mbgp } nexthop <ipv6nexthop>

No

show ipv6 { icmp | nd } global traffic

Yes

show ipv6 cache { { brief | detail } | { interface [ <intf> ] } } [ operational ]

No

show ipv6 client [ <client-name> ]

Yes

show ipv6 fragments [ <source-addr> ]

Yes

show ipv6 icmp { adjacency | neighbor | sync-entries } [ <interface> ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ipv6 icmp internal event-history { errors | msgs | icmpv6-internal | nd | vip-nd | mld { debugs | events } | ha | sync-event | ipv6-sync-event |

No

show ipv6 icmp internal event-history buffer-size { errors | icmpv6-internal | nd | mld { debugs | events } | ha | sync-event | ipv6-sync-event | vrf

No

show ipv6 icmp internal hmm statistics [ detail ]

No

show ipv6 icmp ndp

No

show ipv6 icmp off-list [ vlan <vlan-id> ]

Yes

show ipv6 icmp process sdb

No

show ipv6 icmp vaddr { link-local [ detail ] | global | pt-tree } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ipv6 icmp vpc-statistics

Yes

show ipv6 interface { [ brief [ include-secondary ] | [ <interface> | <ipv6-addr> ] [ detail ] ] } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ipv6 interface global

No

show ipv6 internal [ api ] context array

No

show ipv6 internal { info | fastboot-cache }

No

show ipv6 internal { mem-stats [ shared | all ] [ no-libs ] [ detail ] }

No

show ipv6 internal bfd data [ { vrf { <vrf-name> | <vrf-known-name> | all } | interface <interface> } ]

No

show ipv6 internal event-history { errors | msgs | ipc | ha | log | sdb | snmp | bfd | objstr }

No

show ipv6 internal event-history buffer-size { errors | log | ipc | snmp | ha | sdb | bfd | all }

No

show ipv6 internal netstack { m6rib-txlist [ vrf { <vrf-name> | <vrf-known-name> } ] | m6rib-buffers }

No

show ipv6 internal netstack mroute [ vrf { <vrf-name> | <vrf-known-name> } ]

No

show ipv6 lisp data-cache [ <eid> ] [ vrf { <vrf-name> | <vrf-known-name> } ]

No

show ipv6 local-pt [ vrf { <vrf-name> | <vrf-known-name> | all } ]

No

show ipv6 mroute [ [ bitfield ] | rp | { [ <group> ] summary [ software-forwarded ] } | { summary [ count | software-forwarded ] } | { { <source> <group

Yes

show ipv6 mtu [ statistics | vrf { <vrf-name> | <vrf-known-name> | all [ detail ] } ]

Yes

show ipv6 multicast vrf [ { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ipv6 nd ra dns search-list [ interface <interface> ]

Yes

show ipv6 nd ra dns server [ interface <interface> ]

Yes

show ipv6 nd rt-pref global pt

No

show ipv6 ndp

No

show ipv6 neighbor static [ interface <interface> ]

Yes

"show ipv6 prefix-list { { [ detail | summary ] [ ""<ipv6-pfl-name>"" | <ipv6-pfl-cfg-name> ] } | { { <ipv6-pfl-name> | <ipv6-pfl-cfg-name> } seq <seq-no> } "

Yes

show ipv6 process [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ipv6 process sdb

No

show ipv6 rip [ instance <inst> ] policy statistics redistribute { bgp <as> | { eigrp | isis | <src-rip> | ospfv3 | lisp } <tag> | direct | static } [ vr

No

show ipv6 routers [ all-routers ] [ [ interface <interface> ] | [ vrf { <vrf-name> | <vrf-known-name> | all } ] ]

Yes

show ipv6 static-route [ <prefix> ] [ multicast ] [ track-table ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show ipv6 statistics

No

show ipv6 traffic [ detail ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Yes

show keystore

Yes

show kim inconsistency

No

show kim internal event-history cli

No

show kim internal event-history errors

No

show kim internal event-history events

No

show kim internal event-history intf

No

show kim internal event-history msgs

No

show kim internal event-history mts

No

show kim internal event-history packets

No

show kim internal event-history pss

No

show kim internal event-history vrf

No

show kim internal info [ lpss | namespace ]

No

show kim internal mem-stats [ detail ]

No

show l2fwder l2rib info

No

show l2fwder rmac <mac-address>

No

show l2fwder statistics

No

show l2protocol tunnel [ { interface <intf-range> } | { vlan <vlan-id> } ] [ summary ]

Yes

show l2rib clients [ <client_id> ]

Yes

show l2rib internal client-stats [ <client_id> ]

No

show l2rib internal mem-stats [ detail ]

No

show l2rib internal pss <rt-enum>

No

show l2rib internal state

No

show l2rib internal stats

No

show l2rib internal txlist { all | topo | mac-local-static | mac-bgp | mac-vxlan | mac-best-route | mac-ip-bgp | mac-ip-best-route | imet-vxlan-fl | to

No

show l2rib internal unfreeze-list

No

show l2rib producers [ { topology | mac | mac-ip | ead | pl | imet | flood-list | startup-route | peerid } [ static | local | bgp | vxlan | hmm | arp |

Yes

show l2rib registrations [ client <client_id> [ <topo_id> { mac | mac-ip | ead | pl | imet | flood-list | arp-signal | startup-route | topo } ] ]

Yes

show l2route { mac | openflow mac | dataplane mac [ local | remote ] } { topology <topo-id> | all } [ detail ]

Yes

show l2route { mac-ip | openflow mac-ip } { topology <topo-id> | all } [ detail ]

Yes

show l2route evpn fl all [ detail ]

Yes

show l2route evpn fl evi <vpn-id> [ detail ]

Yes

show l2route evpn imet all [ detail ]

Yes

show l2route evpn imet evi <vpn-id> [ bgp | vxlan ] [ detail ]

Yes

show l2route evpn mac all [ detail ]

Yes

show l2route evpn mac evi <vpn-id> [ static | local | bgp | vxlan ] [ mac <mac_addr> ] [ next-hop { <ipv4_addr> | <ipv6_addr> | <if-hdl> } ] [ detail ]

Yes

show l2route evpn mac-ip all [ detail ]

Yes

show l2route evpn mac-ip evi <vpn-id> [ arp | bgp | hmm ] [ mac <mac_addr> ] [ host-ip { <ipv4_host> | <ipv6_host> } ] [ next-hop { <ipv4_addr> | <ipv6_

Yes

show l2route evpn startup-route all [ detail ]

Yes

show l2route evpn startup-route evi <vpn-id> [ detail ]

Yes

show l2route fl { topology <topo-id> | all } [ detail ]

Yes

show l2route peerid

Yes

show l2route summary

No

show l2route topology [ <topo_id> ] [ detail ]

Yes

show license

Yes

show license brief

Yes

show license file <license-file>

Yes

show license host-id

Yes

show license reserved

No

show license usage [ { detail | <license-feature> } ]

Yes

show line

Yes

show line console

Yes

show line console connected

Yes

show line console user-input-string

Yes

show lisp internal info

No

show lisp stats-cache [ vrf { <vrf-name> | <vrf-known-name> } ]

No

show locator-led status

Yes

show logging

No

show logging console

No

show logging info

Yes

show logging internal info

No

show logging ip access-list cache [ detail ]

Yes

show logging ip access-list internal [ event-history ] errors

No

show logging ip access-list internal [ event-history ] msgs

No

show logging ip access-list internal info [ { global } ]

No

show logging ip access-list internal mem-stats [ detail ]

No

show logging ip access-list status

Yes

show logging last <i0>

No

"show logging level ""tacacs"" "

No

show logging level [ { auth | authpriv | cron | daemon | ftp | kernel | local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7 | lpr | m

No

show logging level { keystore | sksd }

No

show logging level { license | licmgr }

No

show logging level aaa

No

show logging level acllog

No

show logging level aclmgr

No

show logging level adbm

No

show logging level adjmgr

No

show logging level arp

No

show logging level ascii-cfg

No

show logging level bfd

No

show logging level bgp

No

show logging level bloggerd

No

show logging level bootvar

No

show logging level callhome

No

show logging level capability

No

show logging level cdp

No

show logging level cert_enroll

No

show logging level cert-enroll

No

show logging level cfs

No

show logging level clis

No

show logging level clk_mgr

No

show logging level confcheck

No

show logging level copp

No

show logging level core

No

show logging level diagnostic device_test

No

show logging level diagnostic diagclient

No

show logging level diagnostic diagmgr

No

show logging level eltm

No

show logging level ethdstats

No

show logging level ethpm

No

show logging level evmc

No

show logging level evms

No

show logging level fabric forwarding

No

show logging level feature-mgr

No

show logging level fs-daemon

No

show logging level gpixm

No

show logging level im

No

show logging level ip igmp

No

show logging level ip pim

No

show logging level ipconf [ ipv6 ]

No

show logging level ipfib

No

show logging level ipqos

No

show logging level ipv6 icmp

No

show logging level l2fm

No

show logging level l2pt

No

show logging level l3vm

No

show logging level lim

No

show logging level m2rib

No

show logging level mfdm

No

show logging level mfwd

No

show logging level mmode

No

show logging level module

No

show logging level monitor

No

show logging level mvsh

No

show logging level netstack

No

show logging level ntp

No

show logging level nve

No

show logging level ospf

No

show logging level pfstat

No

show logging level pixm

No

show logging level pktmgr

No

show logging level platform

No

show logging level plcmgr

No

show logging level pltfm_config

No

show logging level plugin

No

show logging level port-channel

No

show logging level port-profile

No

show logging level radius

No

show logging level res_mgr

No

show logging level rip

No

show logging level routing [ ip | ipv4 ] multicast

No

show logging level routing ipv6 multicast

No

show logging level rpm

No

show logging level sal

No

show logging level security

No

show logging level session-mgr

No

show logging level smm

No

show logging level snmpd

No

show logging level snmpmib_proc

No

show logging level spanning-tree

No

show logging level spm

No

show logging level stripcl

No

show logging level sysmgr

No

show logging level track

No

show logging level u6rib

No

show logging level ufdm

No

show logging level urib

No

show logging level vdc_mgr

No

show logging level virtual-service

No

show logging level vlan_mgr

No

show logging level vmm

No

show logging level vshd

No

show logging level vtp

No

show logging level xbar

No

show logging logfile

No

show logging logfile duration <s1>

No

show logging logfile last-index

No

show logging logfile start-seqn <i0> [ end-seqn <i1> ]

No

show logging logfile start-time <i0> <s0> <i1> <s1> [ end-time <i2> <s2> <i3> <s3> ]

No

show logging loopback

No

show logging module

No

show logging monitor

No

show logging nvram [ [ { last <i0> } ] [ ] ]

Yes

show logging onboard [ card-first-power-on | card-boot-history | <common_options> | endtime <s0> [ { <common_options> | error-stats [ port <i0> ]

No

show logging onboard { counter-stats | endtime <s0> [ { counter-stats | internal { <dc3_options> } } ] | internal { <dc3_options> } | module <mod

No

show logging origin-id

No

show logging pending

No

show logging pending-diff

No

show logging server

Yes

show logging session status

No

show logging source-interface

No

show logging status

No

show logging timestamp

No

show login

Yes

show login failures

Yes

show login on-failure log

No

show login on-successful log

No

show mac address-table [ static | dynamic | secure ] [ local ] [ { [ address1 <mac-addr> | { switch-id <swid> [ sub-switch-id <sswid> ] } | vlan1 <id> ]

Yes

show mac address-table <module> [ count ] [ static | dynamic | secure ] [ { [ address1 <mac-addr> | { switch-id <swid> [ sub-switch-id <sswid> ] } | vlan

Yes

show mac address-table aging-time

Yes

show mac address-table count [ static | dynamic ] [ local ] [ { [ interface <interface-name> | { switch-id <swid> [ sub-switch-id <sswid> ] } | vlan <id>

Yes

show mac address-table learning-mode [ vlan <id> ]

Yes

show mac address-table loop-detect

No

show mac address-table multicast [ vlan <vlan> ]

Yes

show mac address-table notification mac-move

Yes

show mac vdc <vdc_id>

Yes

show mac-list { [ <mac_list_name> [ { seq <seq_no> | { <mac_addr> [ <mac_mask> ] } } ] ] }

Yes

show maintenance on-reload reset-reasons

Yes

show maintenance profile [ <mode> ]

Yes

show maintenance snapshot-delay

Yes

show maintenance timeout

Yes

show mcectest <arg>

Yes

show mcectest internal event-history errors

No

show mcectest internal event-history msgs

No

show mcectest internal mem-stats [ detail ]

No

show mcectest mcec interface <if> [ use-cache ] [ vdc-id ] [ _readonly_ <mcec_mode> ]

No

show mgmt-policy { <policy-name> | all }

Yes

show module [ { <module> } | { <s0> [ <santa-cruz-range> ] } | { fabric [ <module> ] } ]

Yes

show module <module> bandwidth-fairness

Yes

show module internal [ event-history ] errors

No

show module internal [ event-history ] msgs

No

show module internal activity { module1 <module> | <s0> <santa-cruz-range> }

No

show module internal all [ { module1 <module> | <s0> <santa-cruz-range> } ]

No

show module internal event-history <s0> <santa-cruz-range>

No

show module internal event-history module1 <module>

No

show module internal event-history stats

No

show module internal exceptionlog

No

show module internal exceptionlog internal1 event-history all

No

show module internal exceptionlog internal1 event-history errors

No

show module internal exceptionlog internal1 event-history msgs

No

show module internal exceptionlog module1 <module>

No

show module internal info [ module1 <module> ]

No

show module internal lock

No

show module internal mem-stats [ detail ]

No

show module internal sequence lc

No

show module internal sequence sup

No

show module internal sw info [ module1 <module> ]

No

show module supported

No

show module uptime

Yes

show monitor

Yes

show monitor internal [ event-history ] errors

No

show monitor internal [ event-history ] lock

No

show monitor internal [ event-history ] logs

No

show monitor internal event-history { session <session_number> }

No

show monitor internal event-history debug

No

show monitor internal event-history global

No

show monitor internal event-history msgs

No

show monitor internal info { global-info | stats | clear-stats }

No

show monitor internal info { interface <interface> | session { <session_number> | all } | vlan <vlan_id> | fex | fpc }

No

show monitor internal mem-stats [ detail ]

No

show monitor session { all | <session_number> | range <session_range> } [ brief ]

Yes

show mpls forwarding statistics [ interface { <interface> | all } ]

Yes

show mpls strip internal [ info ] [ { global | labels | ports } [ <val> ] ]

No

show mpls strip labels [ all | static | dynamic | <label_val> ]

Yes

show mvpn bgp { mdt-safi | auto-discovery } [ mdt-source <src-addr> ]

Yes

show mvpn internal { mrib-txlist | mrib-buffers }

No

show mvpn internal ha [ vrf { <vrf-name> | <vrf-known-name> | all } ]

No

show mvpn internal state

No

show mvpn mdt encap [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show mvpn mdt route [ detail ]

Yes

show mvpn snmp mib genericTable [ <mplsVpnVrfName-in> ]

Yes

show mvpn snmp mib mvpnBgpMdtUpdateTable [ <ciscoMvpnBgpMdtUpdGrpAddrType-in> <ciscoMvpnBgpMdtUpdateGroup-in> <ciscoMvpnBgpMdtUpdSrcAddrType-in> <ciscoMvp

Yes

show mvpn snmp mib mvpnMdtDataTable [ <mplsVpnVrfName-in> ]

Yes

show mvpn snmp mib mvpnMdtDefaultTable [ <mplsVpnVrfName-in> ]

Yes

show mvpn snmp mib mvpnMdtJnRcvTable [ <mplsVpnVrfName-in> <ciscoMvpnMdtJnRcvGrpAddrType-in> <ciscoMvpnMdtJnRcvGroup-in> <ciscoMvpnMdtJnRcvSrcAddrType-in>

Yes

show mvpn snmp mib mvpnMdtJnSendTable [ <mplsVpnVrfName-in> <ciscoMvpnMdtJnSendGrpAddrType-in> <ciscoMvpnMdtJnSendGroup-in> <ciscoMvpnMdtJnSendSrcAddrType

Yes

show mvpn snmp mib mvpnMrouteMdtTable [ <mplsVpnVrfName-in> <ciscoMvpnMrouteMvrfGrpAddrType-in> <ciscoMvpnMrouteMvrfGroup-in> <ciscoMvpnMrouteMvrfSrcAddrT

Yes

show mvpn snmp mib mvpnMvrfNumber

Yes

show mvpn snmp mib mvpnNotificationEnable

Yes

show mvpn snmp mib mvpnTunnelTable [ <ifIndex-in> ]

Yes

show nbproxy internal event-history cli

No

show nbproxy internal event-history errors

No

show nbproxy internal event-history events

No

show nbproxy internal event-history intf

No

show nbproxy internal event-history msgs

No

show nbproxy internal event-history mts

No

show nbproxy internal event-history packets

No

show nbproxy internal event-history pss

No

show nbproxy internal event-history vrf

No

show nbproxy internal info

No

show ntp access-groups

Yes

show ntp authentication-keys

Yes

show ntp authentication-status

Yes

show ntp information

Yes

show ntp internal event-history config

No

show ntp internal event-history fsm

No

show ntp internal event-history msgs

No

show ntp internal event-history rts

No

show ntp internal event-history tstamp

No

show ntp internal log-buffer

No

show ntp internal mem-stats

No

show ntp internal mem-stats detail

No

show ntp internal module-info

No

show ntp logging-status

Yes

show ntp peer-status

Yes

show ntp peers

Yes

show ntp rts-update

Yes

show ntp session status

Yes

show ntp source

Yes

show ntp source-interface

Yes

show ntp statistics { [ io ] | [ local ] | [ memory ] | peer { ipaddr { <ipv4_0> | <ipv6_1> } | name <s0> } }

Yes

show ntp status

Yes

show ntp trusted-keys

Yes

show nve bfd neighbors

Yes

show nve interface [ <nve-if> [ detail ] ]

Yes

show nve internal bfd neighbors interface <nve-if>

No

show nve internal bgp rnh database [ vni <vni-id> ]

No

show nve internal event-history cli

No

show nve internal event-history errors

No

show nve internal event-history events

No

show nve internal event-history msgs

No

show nve internal event-history mts

No

show nve internal event-history packets

No

show nve internal event-history platform errors

No

show nve internal event-history platform traces

No

show nve internal event-history platform triggers

No

show nve internal event-history pss

No

show nve internal event-history triggers

No

show nve internal event-history xos-events

No

show nve internal export bgp rnh

No

show nve internal export controller peers

No

show nve internal export global

No

show nve internal export nve

No

show nve internal export peer

No

show nve internal export peer-vni

No

show nve internal export redundancy-group

No

show nve internal export vni [ <vni-id> ]

No

show nve internal libinfo

No

show nve internal mem-stats [ detail ]

No

show nve internal mrib-history [ group <group-addr> | clear ]

No

show nve internal multicast-group

No

show nve internal peer-history [ peer <peer-addr> | clear ]

No

show nve internal peer-notify-history [ clear ]

No

show nve internal peers [ peer-ip <addr> ] history-log

No

show nve internal pim-cache [ vrf { <vrf-name> | <vrf-known-name> | all } ]

No

show nve internal platform globals

No

show nve internal platform interface [ <nve-if> [ { vni [ <vni-id> ] } | { peer [ <peerip> ] } ] ] [ detail ]

No

show nve internal platform statistics [ clear ]

No

show nve internal platform txn_buf { sw_bd | peer_id | peer_adj }

No

show nve internal port-history [ clear ]

No

show nve internal pss redundancy-group

No

show nve internal pss replication-servers

No

show nve internal snmp cnvoNvoPerPeerStatsTable nve <nve_in> paddr_type <paddr_type_in> paddr <paddr_in>

Yes

show nve internal snmp cnvoNvoTable nve <nve_in>

Yes

show nve internal snmp cnvoPeerTable nve <nve_in> paddr_type <paddr_type_in> paddr <paddr_in>

Yes

show nve internal snmp cnvoVNetStatsTable nve <nve_in> vni <vni_in>

Yes

show nve internal snmp cnvoVNetTable nve <nve_in> vni <vni_in>

Yes

show nve internal snmp global cnvoUdpDestinationPort

Yes

show nve internal source-group

No

show nve internal state

No

show nve internal statistics { mts | interface <nve-if> | vni <vni-id> | peer <addr> } [ clear ]

No

show nve internal txlist { source-group }

No

show nve internal vni { <vni-id> | all }

No

show nve internal vni-history [ vni <vni> | clear ]

No

show nve peers [ [ [ interface <nve-if> | peer-ip <user-peer-ip> | control-plane | data-plane ] [ detail ] ] | [ control-plane-vni [ vni <vni-id> | peer-i

Yes

show nve peers { <addr> | all } vni { <vni-id> | all } interface <nve-if>counters

Yes

show nve peers <addr> interface <nve-if>counters

Yes

show nve replication-servers

Yes

show nve vni [ { { interface <nve-if> | <vni-id> } [ detail ] } | control-plane | data-plane | summary | controller ]

Yes

show nve vni <vni-id> counters

Yes

show nve vni ingress-replication [ { interface <nve-if> | <vni-id> } ]

Yes

show nve vni peer-vtep [ { interface <nve-if> | <vni-id> } ]

Yes

show nve vrf [ vrf-name ]

Yes

show nve vxlan-params

Yes

show nxapi

Yes

show nxapi internal buffer

No

show nxapi retries

No

show object-group [ <name> ]

Yes

show param-list [ param-list-name <plistname> ] [ show-instance ]

Yes

show password secure-mode

Yes

show password strength-check

Yes

show pmap-int { interface [ <iface-list> ] [ input | output ] [ type <qos-or-q> ] | vlan [ <vlan-list> ] [ inputx | outputx ] [ type qos ] }

Yes

show pmap-int-br interface br

Yes

show policy-map [ { [ type qos ] [ <pmap-name-qos> ] } | { type queuing [ <pmap-name-que> ] } ]

Yes

show policy-map interface { [ <ifnum> ] } type psp { [ <pmap-name> [ client <clienttype> <clientID> ] ] | [ handle <ppf_id> ] } { [ class-map-list { [

Yes

show policy-map interface control-plane { [ module <slot-no-in> [ class <cmap-name> ] ] | [ class <cmap-name> [ module <slot-no-in> ] ] }

Yes

show policy-map system [ type { network-qos | qos [ input2 ] | queuing [ input | output ] } ]

Yes

show policy-map type control-plane [ expand ] [ { name <pmap-name> } ]

Yes

show policy-map type network-qos [ <pmap-name-nq> ]

Yes

show policy-map type psp { [ <pmap-name> [ client <clienttype> <clientID> ] [ cfg-mode <cfgmode> ] ] | [ handle <ppf_id> ] }

Yes

show port-channel capacity

Yes

show port-channel compatibility-parameters

Yes

show port-channel database [ interface <if0> ]

Yes

show port-channel internal event-history all

No

show port-channel internal event-history debugs

No

show port-channel internal event-history errors

No

show port-channel internal event-history interface <if0>

No

show port-channel internal event-history interface <if0>

No

show port-channel internal event-history lock

No

show port-channel internal event-history msgs

No

show port-channel internal info all

No

show port-channel internal info compat-check-log

No

show port-channel internal info interface <if0>

No

show port-channel internal info interface <if0>

No

show port-channel internal lacp-channels [ interface <if0> ]

Yes

show port-channel internal max-channels

Yes

show port-channel internal mem-stats [ detail ]

No

show port-channel internal member-mode [ interface <if0> ]

Yes

show port-channel internal sdb

No

show port-channel load-balance { [ module <module> ] | { fex { all } } }

Yes

show port-channel load-balance forwarding-path { interface <ch-id> | hgig } { src-interface <src-if> | vlan <vlan-id> | src-mac <src-mac> | d

Yes

show port-channel load-balance forwarding-path1 interface <ch-id> src-interface <src-if> { vlan <vlan-id> | src-mac <src-mac> | dst-mac <dst-

Yes

show port-channel load-balance hardware forwarding-path { interface <ch-id> | hgig } { source-interface <if-id> } { vlan <vlan-id> | src-mac

Yes

show port-channel load-balance internal algorithm

No

show port-channel rbh-distribution [ interface <if0> ]

Yes

show port-channel summary [ interface <if0> | controller ]

Yes

show port-channel traffic [ interface <if0> ]

Yes

show port-channel usage

Yes

show port-profile [ name <all_profile_name> ]

Yes

show port-profile brief

Yes

show port-profile expand-interface [ name <all_profile_name> ]

Yes

show port-profile sync-status [ interface <intfname> ]

Yes

show port-profile usage [ name <all_profile_name> ]

Yes

show privilege

No

show processes

Yes

show processes { version | threads } [ <comp-string> ]

Yes

show processes cpu [ sort ]

Yes

show processes cpu history

No

show processes cpu module <i0>

Yes

show processes log

Yes

show processes log details

Yes

show processes log pid <i0>

Yes

show processes log vdc-all

Yes

show processes memory

Yes

show processes memory clis [ shared | private ]

No

show processes memory shared [ detail | dynamic ]

Yes

show processes vdc <e-vdc2>

No

show processes vdc <e-vdc2> cpu

No

show processes vdc <e-vdc2> log

No

show processes vdc <e-vdc2> log details

No

show processes vdc <e-vdc2> log pid <i1>

No

show processes vdc <e-vdc2> memory

Yes

show pss debug

No

show qos dcbxp incompatibility interface <iface-num>

Yes

show qos dcbxp info

Yes

show qos shared-policer [ type qos1 ] [ <policer-name> ]

Yes

show queuing [ interface <if_list> ] [ summary ] [ module <module> ]

Yes

show queuing [ interface <if_list> ] [ summary ] [ module <module> ]

Yes

show queuing burst-detect [ interface <if_name> [ queue <queue_num> ] ] [ module <module> ] [ detail ]

Yes

show queuing burst-detect [ interface <if_name> [ queue <queue_num> ] ] [ module <module> ] [ detail ]

Yes

show queuing internal snmp interface <ifx-in>

Yes

show queuing internal snmp interface <ifx-in>

Yes

show queuing internal snmp interface cos <ifx-in> <grp-in>

Yes

show queuing internal snmp interface cos <ifx-in> <grp-in>

Yes

show queuing pfc-queue [ interface <if_list> ] [ module <module> ] [ detail ]

Yes

show queuing pfc-queue snmp ifIndex <ifidx>

Yes

show queuing1 [ interface <if_list> ] [ summary ] [ module <module> ]

Yes

show queuing1 [ interface <if_list> ] [ summary ] [ module <module> ]

Yes

show radius status

Yes

show radius-cfs

Yes

show radius-server

Yes

show radius-server { <host0> }

Yes

show radius-server directed-request

Yes

show radius-server groups [ <s0> ]

Yes

show radius-server sorted

Yes

show radius-server statistics <host0>

Yes

show redundancy status

Yes

show resource [ <res-mgr-res-known-name> ] [ hidden-too | with-flags ]

Yes

show resource internal event-history errors

No

show resource internal event-history msgs

No

show resource internal mem-stats [ detail ]

No

show rmon { alarms | events | hcalarms | info | logs }

Yes

show role [ name <arg3> ]

Yes

show role feature [ name <arg5> | detail ]

Yes

show role feature-group [ name <arg4> ] [ detail ]

Yes

show rollback log { exec | verify }

Yes

show rollback status

Yes

"show route-map [ ""<route-map-name>"" | <route-map-cfg-name> ] "

Yes

show routing [ ip | ipv4 ] [ unicast ] [ internal ] event-history { statistics | msgs | { { add-route | cli | delete-route | detail | dme | errors | gen

No

show routing [ ip | ipv4 ] [ unicast ] internal library-info

No

show routing [ ip | ipv4 ] [ unicast ] internal mem-stats [ all | shared ] [ no-libs ] [ detail ]

No

show routing [ ip | ipv4 ] [ unicast ] memory estimate [ routes <route-count> [ next-hops <nh-count> ] [ next-hops-v6 <nh6-count> ] ] [ labels ]

Yes

show routing [ ip | ipv4 ] [ unicast ] memory statistics

Yes

show routing [ ip | ipv4 ] internal statistics [ route-summary [ [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ] ]

No

show routing [ ip | ipv4 ] multicast [ internal ] event-history { errors | msgs | <mrib-event-hist-buf-name> | statistics }

No

show routing [ ip | ipv4 ] multicast { { [ bitfield ] [ detail ] } | rp | { [ <group> ] summary [ software-forwarded | rpf-failed ] } | { summary [ count

Yes

show routing [ ip | ipv4 ] multicast clients [ <client-name> ]

Yes

show routing [ ip | ipv4 ] multicast internal { iod-cache | { rpf-tree | bitfield | mfdm } [ vrf [ <vrf-name> | <vrf-known-name> | all ] ] }

No

show routing [ ip | ipv4 ] multicast internal { txlist [ detail ] [ vrf [ <vrf-known-name> | all ] ] | client-buffers | route-buffers }

No

show routing [ ip | ipv4 ] multicast internal fabric forwarder hash <group> <rpf_source> <border_leafs>+

No

show routing [ ip | ipv4 ] multicast internal flag-definitions

No

show routing [ ip | ipv4 ] multicast internal hash { <source> <group> | <group> <source> } [ vrf { <vrf-name> | <vrf-known-name> } ]

No

show routing [ ip | ipv4 ] multicast internal library-info

No

show routing [ ip | ipv4 ] multicast internal mem-stats [ shared | all ] [ no-libs ] [ detail ]

No

show routing [ ip | ipv4 ] multicast internal pim-cache [ vrf { <vrf-name> | <vrf-known-name> | all } ]

No

show routing [ ip | ipv4 ] multicast internal rpf-source [ <source> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

No

show routing [ ip | ipv4 ] multicast mdt encapsulation [ detail ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Yes

show routing [ ip | ipv4 ] multicast memory estimate [ groups <group-count> sources-per-group <source-count> oifs-per-entry <oif-count> [ mdt-encap-entri

Yes

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] clients [ <client> | <protocol>

Yes

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] hash <source> <dest> [ ip-proto

Yes

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] hidden-nh

Yes

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] internal [ force-update ]

No

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] internal pending-routes [ summ

No

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] nhlfe [ stats ] [ vrf { <vrf-na

Yes

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] recursive-next-hop [ <ip-addr>

Yes

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] [ ip | ipv4 ] [ unicast ] [ topology <topology-name> ] unresolved-next-hop { [ <ip-ad

No

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] clients [ <client> | <ipv6-protocol> ]

Yes

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] hash [ mpls <ipv6-prefix> [ eos ] ] <so

Yes

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] hidden-nh

Yes

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] internal [ force-update ] [ vrf { <vrf

No

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] internal distribution

No

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] internal distribution rnh

No

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] nexthop info [ vrf { <vrf-name> | <vrf

No

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] nhlfe [ stats ] [ vrf { <vrf-name> | <v

Yes

show routing [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ipv6 [ unicast ] [ topology <topology-name> ] recursive-next-hop [ <ipv6-addr> ] [ vr

Yes

show routing ipv6 [ unicast ] [ internal ] event-history { statistics | msgs | am | cli | detail | errors | general | ha | lfe | recursive-next-hop | s

No

show routing ipv6 [ unicast ] internal buffers

No

show routing ipv6 [ unicast ] internal library-info

No

show routing ipv6 [ unicast ] internal mem-stats [ all | shared ] [ no-libs ] [ detail ]

No

show routing ipv6 [ unicast ] internal ufdm

No

show routing ipv6 [ unicast ] memory estimate [ routes <route-count> next-hops <nh-count> ] [ labels ]

Yes

show routing ipv6 [ unicast ] memory statistics

Yes

show routing ipv6 internal statistics [ route-summary [ [ vrf { <vrf-name> | <vrf-known-name> | <vrf-all> } ] ] ]

No

show routing ipv6 multicast [ internal ] event-history { errors | msgs | <m6rib-event-hist-buf-name> | statistics }

No

show routing ipv6 multicast [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ topology <topology-name> ] [ [ bitfield ] | rp | { [ <group> ] summary [ s

Yes

show routing ipv6 multicast clients [ <client-name> ]

Yes

show routing ipv6 multicast internal

No

show routing ipv6 multicast internal { rpf-tree | deleted-tree | bitfield | mfdm } [ vrf [ <vrf-name> | <vrf-known-name> | all ] ]

No

show routing ipv6 multicast internal flag-definitions

No

show routing ipv6 multicast internal library-info

No

show routing ipv6 multicast internal mem-stats [ shared | all ] [ no-libs ] [ detail ]

No

show routing ipv6 multicast memory estimate [ groups <group-count> sources-per-group <source-count> oifs-per-entry <oif-count> ]

Yes

show routing multicast internal

No

show routing vxlan-hash peer-ip <peer-ip> <inner-src-mac> <inner-dst-mac> [ <inner-src-ip> <inner-dst-ip> ] [ ip-proto <ip-proto> ] [ <inner-src-port> <

No

show routing-context

No

show routing-privilege

No

show running-config

No

"show running-config ""tacacs+"" [ all ] "

No

show running-config { switch-profile | include-switch-profile }

No

show running-config aaa [ all ]

No

show running-config acllog [ all ]

No

show running-config aclmgr [ all | inactive-if-config ]

No

show running-config aclmgr { active-if-config | all-if-config }

No

show running-config adjmgr [ all ]

No

show running-config all

No

show running-config arp [ all ]

No

show running-config bfd [ all ]

No

show running-config bgp [ all ]

No

show running-config bloggerd [ all ]

No

show running-config callhome [ all ]

No

show running-config cdp [ all ]

No

show running-config cert-enroll [ all ]

No

show running-config cfs [ all ]

No

show running-config clock_manager [ all ]

No

show running-config config-profile [ <all_conf_profile_name> ]

No

show running-config copp [ all ]

No

show running-config diagnostic [ all ]

No

show running-config diff

No

show running-config eem

No

show running-config eltm

No

show running-config exclude <feature-list>+

No

show running-config expand-port-profile

No

show running-config explicit

No

show running-config fabric forwarding [ all ]

No

show running-config icmpv6 [ all ]

No

show running-config igmp [ all ]

No

show running-config interface [ <if0> ] [ all ] [ expand-port-profile ]

No

show running-config interface <if0> [ membership ] [ expand-port-profile ]

No

show running-config interface <if0> defaults

No

show running-config interface <if0> explicit

No

show running-config ip [ all ]

No

show running-config ipqos [ all | inactive-if-config ]

No

show running-config ipqos { active-if-config | all-if-config }

No

show running-config ipv6 [ all ]

No

show running-config l2pt [ all ]

No

show running-config l3vm [ all ]

No

show running-config license [ all ]

No

show running-config mmode [ all ]

No

show running-config monitor [ all ]

No

show running-config mpls strip [ all ]

No

show running-config ntp [ all ]

No

show running-config nv overlay [ all ]

No

show running-config ospf [ all ]

No

show running-config param-list [ <plistname> ]

No

show running-config pim [ all ]

No

show running-config port-profile [ <all_profile_name> ]

No

show running-config radius [ all ]

No

show running-config res_mgr

No

show running-config rip [ all ]

No

show running-config routing { ip | ipv4 } multicast [ all ]

No

show running-config routing ipv6 multicast [ all ]

No

show running-config rpm [ all ]

No

show running-config section <section>

No

show running-config security [ all ]

No

show running-config snmp [ all ]

No

show running-config spanning-tree [ <all> | interface <interface_range> ]

No

show running-config track [ all ]

No

show running-config vdc [ all ]

No

show running-config vdc-all [ all ]

No

show running-config virtual-service

No

show running-config vlan

No

show running-config vlan <vlan-id> [ expand-port-profile ]

No

show running-config vlan_mgr

No

show running-config vrf <vrf-cfg-name> [ all ]

No

show running-config vrf default [ all ]

No

show running-config vshd

No

show running-config vtp [ all ]

No

show snapshots

Yes

show snapshots compare <snapshot-name-T1> <snapshot-name-T2>

Yes

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> ipv4routes

Yes

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> ipv6routes

Yes

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> summary

Yes

show snapshots dump <snapshot-name>

No

show snapshots sections

Yes

show snmp

Yes

show snmp community

Yes

show snmp context

Yes

show snmp engineID

Yes

show snmp group

Yes

show snmp host

Yes

show snmp internal climib loaded [ <climib-name> ]

No

show snmp internal climib mib cshc cshcInterfaceBufferTable ifindex <ifindex_in>

Yes

show snmp internal climib mib cshc cshcModuleInterfaceDropsTable ent_idx <ent_idx_in>

Yes

show snmp internal climib mib entity entAliasMappingTable entPhysicalIndex <entPhysicalIndex> entAliasLogicalIndexOrZero <entAliasLogicalIndexOrZ

Yes

show snmp internal climib mib entity entPhysicalContainsTable entPhysicalIndex <entPhysicalIndex> entPhysicalChildIndex <entPhysicalChildIndex> [

Yes

show snmp internal climib mib error-disable cErrDisableIfStatusTable ifIndex <ifx-in> vlan <vlan-in>

Yes

show snmp internal climib mib fibCounterTable <entPhysicalIndex-in> <counterIndex-in>

Yes

show snmp internal climib mib ifext cieIfDot1dBaseMappingTable ifindex <ifindex>

Yes

show snmp internal climib mib pfcext cpfcIfPriorityTable ifIndex <ifx-in> priority <grp-in>

Yes

show snmp internal climib mib pfcext cpfcIfTable ifIndex <ifx-in>

Yes

show snmp internal climib mib pfcext cpfcWatchdogIfQueueInfoTable ifIndex <ifx-in> queue-number <queue-in>

Yes

show snmp internal climib mib vlanif cviVlanInterfaceIndexTable vlan-id <vlan> ifindex <ifindex>

Yes

show snmp internal climib switch-qos [ csqHwSharedPoolUsageTable [ entPhysicalIndex <mod_ent> [ csqHwSharedPoolDeviceId <device_id> [ csqHwShared

Yes

show snmp internal climib switch-qos [ csqIfPriGrpInBufUsageTable [ ifIndex <ifidx> [ csqIfPriGrpInBufUsageGrpNo <pgidx> ] ] ]

Yes

show snmp internal climib switch-qos [ csqIfQosGroupInfoTable [ ifIndex <ifIndex-in> [ csqIfQosGroupInfoDirection <ifDirection-in> [ csqIfQosGrou

Yes

show snmp internal climib switch-qos [ csqIfQosGroupStatsTable [ ifIndex <ifIndex-in> [ csqIfQosGroupStatsDirection <ifDirection-in> [ csqIfQosGr

Yes

show snmp internal climib switch-qos [ csqServicePoolCellSize ]

Yes

show snmp internal climib switch-qos [ csqSharedPoolUsageTable [ entPhysicalIndex <mod_ent> [ csqSharedPoolUsageInstNo <inst_id> [ csqSharedPoolU

Yes

show snmp internal climib test <id>

Yes

show snmp internal climib trace [ <buffers> ]

No

show snmp internal climib trace core <pid>

No

show snmp internal conditional-loaded-mib-dump

No

show snmp internal eem-policy

No

show snmp internal feature-mgr-dump

No

show snmp internal globals

No

show snmp internal loaded mibs

No

show snmp internal oids notification

No

show snmp internal oids registered

No

show snmp internal oids supported [ create ]

No

show snmp internal oids unsupported

No

show snmp internal protocol-instance-table

No

show snmp internal registered-notifications

No

show snmp internal tcp connections

No

show snmp internal trace log

No

show snmp internal translate oidorname <nameoroid>

No

show snmp mib igmpCacheTable [ <igmpCacheAddress-in> ] [ <igmpCacheIfIndex-in> ]

Yes

show snmp mib igmpInterfaceTable [ <igmpInterfaceIfIndex-in> ]

Yes

show snmp mib pimCandidateRPTable [ <pimCandidateRPGroupAddress-in> ] [ <pimCandidateRPGroupMask-in> ]

Yes

show snmp mib pimComponentTable [ <pimComponentIndex-in> ]

Yes

show snmp mib pimInterfaceTable [ <pimInterfaceIfIndex-in> ]

Yes

show snmp mib pimIpMRouteNextHopTable [ <ipMRouteNextHopGroup-in> <ipMRouteNextHopSource-in> <ipMRouteNextHopSourceMask-in> <ipMRouteNextHopIfIndex-in> <i

Yes

show snmp mib pimIpMRouteTable [ <ipMRouteGroup-in> ] [ <ipMRouteSource-in> ] [ <ipMRouteSourceMask-in> ]

Yes

show snmp mib pimJoinPruneInterval

Yes

show snmp mib pimNeighborTable [ <pimNeighborAddress-in> ]

Yes

show snmp mib pimRPSetTable [ <pimRPSetComponent-in> ] [ <pimRPSetGroupAddress-in> ] [ <pimRPSetGroupMask-in> ] [ <pimRPSetAddress-in> ]

Yes

show snmp pss

No

show snmp roledebug

No

show snmp sessions

Yes

show snmp snmpv3stats

No

show snmp source-interface

Yes

show snmp trap

Yes

show snmp user [ <s0> [ engineID <s1> ] ]

Yes

show snmpmib internal [ event-history ] errors

No

show snmpmib internal [ event-history ] msgs

No

show snmpmib internal info [ { global } ]

No

show snmpmib internal mem-stats [ detail ]

No

show sockets buffers [ { [ all <count> ] [ free <count> ] } ]

No

show sockets client { [ pid <pid> ] [ tcp | udp | raw ] [ detail ] [ kstack-ns-all ] }

Yes

show sockets connection [ pid <pid> | tcp | udp | raw ] [ local { <srcIP> | <srcIP6> } ] [ foreign { <dstIP> | <dstIP6> } ] [ detail ] [ keydetails ] [

Yes

show sockets internal { dispatch-statistics | { mem-stats [ detail ] } }

No

show sockets internal event-history { errors | msgs | setup | ha | events | proto | log }

No

show sockets internal event-history buffer-size { errors | msgs | setup | ha | events | proto | log | all }

No

show sockets keychain-dump

No

show sockets local-port-range

Yes

show sockets performance [ clear ]

No

show sockets secure-lxc

No

show sockets statistics [ all | tcp | tcp6 | tcpsum | udp | udp6 | udpsum | raw | raw6 | rawsum ]

Yes

show sockets tcp keychain binding

Yes

show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ]

Yes

show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] { <verbosity> | active } +

No

show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] interface <interface-id>

Yes

show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] interface <interface-id> { <verbosity> | active } +

No

show spanning-tree [ vlan <vlan-id> | bridge-domain <bd-id> ] summary

Yes

show spanning-tree internal [ event-history ] errors

No

show spanning-tree internal [ event-history ] msgs

No

show spanning-tree internal event-history { { tree <tree-id> [ all-ports | interface <interface-id> ] } | deleted | all } [ brief ]

No

show spanning-tree internal event-history stp-lite

No

show spanning-tree internal event-history vpc pes

No

show spanning-tree internal event-history vpc sps

No

show spanning-tree internal flc-info [ vlan <vlan-id> | bridge-domain <bd-id> ]

No

show spanning-tree internal info all

No

show spanning-tree internal info flush qstats

No

show spanning-tree internal info flush stats

No

show spanning-tree internal info global

No

show spanning-tree internal info issu

No

show spanning-tree internal info l2gstp [ vlan <vlan-id> ]

No

show spanning-tree internal info l2gstp peer-info [ pss ]

No

show spanning-tree internal info l2gstp sdb

No

show spanning-tree internal info sps-pending

No

show spanning-tree internal info sps-q-stats

No

show spanning-tree internal info stp-lite [ tree <tree-id> ] stats

No

show spanning-tree internal info tree <tree-id> [ all-ports | interface <interface-id> ]

No

show spanning-tree internal info vpc

No

show spanning-tree internal interactions

No

show spanning-tree internal mem-stats [ detail ]

No

show spanning-tree issu-impact

No

show spanning-tree mst [ <mst-id> ]

Yes

show spanning-tree mst [ <mst-id> ] detail

No

show spanning-tree mst [ <mst-id> ] interface <interface-id>

Yes

show spanning-tree mst [ <mst-id> ] interface <interface-id> detail

No

show spanning-tree summary totals

Yes

show sprom { backplane <i0> | module <module> <i1> | xbar <santa-cruz-range> <i2> | powersupply <i3> | fan <i4> | sup | stby-sup | all | all2 | backplane2

Yes

show ssh key [ { dsa | rsa } ]

Yes

show ssh server

Yes

show startup-config

No

"show startup-config ""tacacs+"" "

No

show startup-config { log | mdp-log } [ bootstrap ]

No

show startup-config { switch-profile | include-switch-profile }

No

show startup-config aaa

No

show startup-config acllog [ all ]

No

show startup-config aclmgr [ all ]

No

show startup-config adjmgr [ all ]

No

show startup-config arp [ all ]

No

show startup-config bfd [ all ]

No

show startup-config bgp [ all ]

No

show startup-config bloggerd [ all ]

No

show startup-config callhome

No

show startup-config cdp [ all ]

No

show startup-config cert-enroll

No

show startup-config cfs [ all ]

No

show startup-config config-profile [ <all_conf_profile_name> ]

No

show startup-config copp [ all ]

No

show startup-config dhcp [ all ]

No

show startup-config diagnostic [ all ]

No

show startup-config eem

No

show startup-config eltm

No

show startup-config exclude <feature-list>+

No

show startup-config expand-port-profile

No

show startup-config fabric forwarding [ all ]

No

show startup-config glbp

No

show startup-config hsrp

No

show startup-config icmpv6 [ all ]

No

show startup-config igmp [ all ]

No

show startup-config interface [ <if0> ] [ expand-port-profile ]

No

show startup-config interface <if0> [ membership ] [ expand-port-profile ]

No

show startup-config ip [ all ]

No

show startup-config ipqos [ all ]

No

show startup-config ipv6 [ all ]

No

show startup-config l2pt [ all ]

No

show startup-config l3vm [ all ]

No

show startup-config license [ all ]

No

show startup-config mmode [ all ]

No

show startup-config monitor

No

show startup-config mpls strip [ all ]

No

show startup-config nat [ all ]

No

show startup-config ntp [ all ]

No

show startup-config nv overlay [ all ]

No

show startup-config ospf [ all ]

No

show startup-config param-list [ <plistname> ]

No

show startup-config pim [ all ]

No

show startup-config port-profile [ <all_profile_name> ]

No

show startup-config radius

No

show startup-config rip [ all ]

No

show startup-config routing { ip | ipv4 } multicast [ all ]

No

show startup-config routing ipv6 multicast [ all ]

No

show startup-config rpm [ all ]

No

show startup-config security

No

show startup-config sla responder

No

show startup-config sla sender

No

show startup-config snmp [ all ]

No

show startup-config track

No

show startup-config vdc [ all ]

No

show startup-config vdc-all

No

show startup-config virtual-service

No

show startup-config vlan

No

show startup-config vlan <vlan-id>

No

show startup-config vmtracker [ all ]

No

show startup-config vrf <vrf-cfg-name> [ all ]

No

show startup-config vrf default [ all ]

No

show startup-config vrrp

No

show startup-config vrrpv3 [ all ]

No

show startup-config vshd

No

show startup-config vtp [ all ]

No

show switch-profile

Yes

show switch-profile [ <profile-name> ] { session-history | status commit }

Yes

show switch-profile [ <profile-name> ] buffer

Yes

show switch-profile [ <profile-name> ] peer [ <dest-ip> ] [ details ]

Yes

show switch-profile [ <profile-name> ] status

Yes

show switching-mode

Yes

show switching-mode fabric-speed

Yes

show system [ internal ] clis event-history { nvdb | client | errors | parser | ha | cli | objstr | objstr-errors }

No

show system auto-collect tech-support

No

show system cores

Yes

show system dme error-id <i0>

No

show system error-id { list | <i0> }

Yes

show system exception-info

No

show system fabric-mode

Yes

show system fast-reload stabilization-timer

No

show system inband queuing statistics

Yes

show system inband queuing status

Yes

"show system internal ""tacacs+"" event-history errors "

No

"show system internal ""tacacs+"" event-history msgs "

No

"show system internal ""tacacs+"" mem-stats [ detail ] "

No

show system internal { keystore | sksd } event-history errors

No

show system internal { keystore | sksd } event-history messages

No

show system internal { keystore | sksd } mkey detail

No

show system internal { sksd | keystore } mem-stats [ detail ]

No

show system internal aaa event-history errors

No

show system internal aaa event-history msgs

No

show system internal aaa mem-stats [ detail ]

No

show system internal access-list acl-capture [ module <module> ]

No

show system internal access-list arp-ether [ module <module> ] [ instance <instance_number> ]

No

show system internal access-list copp rates [ stage1 | stage2 ] [ module <module> ] [ { instance <instance_number> | { unit <unit> slice <slice> } } ]

No

show system internal access-list copp static-acls

No

show system internal access-list copp stats [ stage1 | stage2 ] [ module <module> ] [ { instance <instance_number> | { unit <unit> slice <slice> } } ]

No

show system internal access-list fcoe [ inst <inst> ] { [ match { did <dfcid> | sid <sfcid> | vlan <vnum> } [ match-exact ] ] }

No

show system internal access-list feature bank map interface egress [ module <module> ]

No

show system internal access-list feature bank map interface ingress [ module <module> ]

No

show system internal access-list feature bank map vlan egress [ module <module> ]

No

show system internal access-list feature bank map vlan ingress [ module <module> ]

No

show system internal access-list globals

No

show system internal access-list ipsg-stats [ module <module> ] [ instance <instance_number> ]

No

show system internal access-list status

Yes

show system internal access-list sup-redirect-stats [ all ] [ module <module> ] [ { instance <instance_number> | { unit <unit> slice <slice> } } ]

No

show system internal access-list tags

Yes

show system internal access-list tags

Yes

show system internal access-list tcam { ingress | egress } { region <region> | start-idx <start-idx> } [ count <count> ] [ [ { instance <instance> | {

No

show system internal access-list tcam flexkey [ { start-idx <start-idx> [ count <count> ] } ] [ [ { instance <instance> | { unit <unit> slice <slice> }

No

show system internal access-list tcam label

No

show system internal access-list vpc-convergence [ module <module> ] [ instance <instance_number> ]

No

show system internal aclmgr access-lists policies [ <intf> | vty ]

Yes

show system internal aclmgr dictionaries [ <dict_num> ]

Yes

show system internal aclmgr event-history errors

No

show system internal aclmgr event-history locks

No

show system internal aclmgr event-history msgs

No

show system internal aclmgr event-history sessions

No

show system internal aclmgr log

Yes

show system internal aclmgr memstat [ details ]

No

show system internal aclmgr ppf { subscription | sessions | dsets | nodes [ all ] | control [ all-sessions | error-sessions | modify-sessions | request-

Yes

show system internal aclmgr ppf private-pss

Yes

show system internal aclmgr sessions

No

show system internal aclmgr state-cache

Yes

show system internal aclmgr statistics buckets

Yes

show system internal aclmgr stats-files

No

show system internal aclmgr status

Yes

show system internal aclmgr time-range

Yes

show system internal aclmgr transition-history [ name <s2> ]

No

show system internal aclmgr vlan-cache { all | all-vlans | all-members | vlans <vlans> | members <intf> }

Yes

show system internal aclmgr vlan-membership { <vlans> | state-cache } <req-type>

Yes

show system internal aclqos buffer-info [ module <module> ] [ { instance <instance_number> | { unit <unit> slice <slice> } } ]

Yes

show system internal aclqos buffer-info [ module <module> ] [ { instance <instance_number> | { unit <unit> slice <slice> } } ]

Yes

show system internal aclqos database { policy { subscriptions | sessions | instances | nodes | control } } [ module <module> ]

Yes

show system internal aclqos database { policy { subscriptions | sessions | instances | nodes | control } } [ module <module> ]

Yes

show system internal aclqos event-history <typeval> log-file

No

show system internal aclqos event-history association-manager

No

show system internal aclqos event-history cl-qos

No

show system internal aclqos event-history fab

No

show system internal aclqos event-history fc

No

show system internal aclqos event-history libdrv

No

show system internal aclqos event-history map

No

show system internal aclqos event-history merge

No

show system internal aclqos event-history msgs

No

show system internal aclqos event-history pl

No

show system internal aclqos event-history ppf

No

show system internal aclqos event-history ppf-parse

No

show system internal aclqos event-history qng

No

show system internal aclqos event-history qng-hw

No

show system internal aclqos event-history rl

No

show system internal aclqos event-history rm

No

show system internal aclqos event-history sch

No

show system internal aclqos event-history stats

No

show system internal aclqos event-history tbl

No

show system internal aclqos event-history trace

No

show system internal aclqos event-history trace-detail

No

show system internal aclqos event-history uf

No

show system internal aclqos fip { module <s0> | module-list }

No

show system internal aclqos info dst

No

show system internal aclqos info fc

No

show system internal aclqos info fex [ module <module> ]

No

show system internal aclqos info l4-protocol

No

show system internal aclqos info label reservation

No

show system internal aclqos info label2sel label <label_id> inst <inst_id>

No

show system internal aclqos info linecard

No

show system internal aclqos info lous

No

show system internal aclqos info mac-etype-proto

No

show system internal aclqos info mcm [ module <module> ]

No

show system internal aclqos info pd [ module <module> ]

No

show system internal aclqos info pfc buffer-reservation [ module <module> ] [ instance <instance> ]

Yes

show system internal aclqos info pfc buffer-reservation [ module <module> ] [ instance <instance> ]

Yes

show system internal aclqos info plcy

No

show system internal aclqos info plcy-lbl-hash

No

show system internal aclqos info policy-rm

No

show system internal aclqos info port-channel database

No

show system internal aclqos info proc-cntx

No

show system internal aclqos info pss

No

show system internal aclqos info redirect

No

show system internal aclqos info scheduler database

No

show system internal aclqos info snf-db

No

show system internal aclqos info spl database detail

No

show system internal aclqos info spl database summary

No

show system internal aclqos info spl verify-stats

No

show system internal aclqos info tcam

No

show system internal aclqos info tcp-flags

No

show system internal aclqos info tracelog

No

show system internal aclqos info vlan database

No

show system internal aclqos mem-stats [ detail ]

No

show system internal aclqos ns-stats [ module <module> ] [ instance <instance_number> ]

No

show system internal adjmgr { txlist | ufdm-buffers | adjacency-cache }

No

show system internal adjmgr cache { { brief | detail } | { interface [ <intf> ] } } [ operational ]

No

show system internal adjmgr client [ index ]

No

show system internal adjmgr event-history buffer-size { control | errors | ipc | stats | ha | cli | sdb | snmp | nb | dme-event | all }

No

show system internal adjmgr hmm statistics [ detail ]

No

show system internal adjmgr internal { mem-stats [ shared | all ] [ no-libs ] [ detail ] }

No

show system internal adjmgr internal event-history { control | errors | msgs | ipc | events | stats | ha | lcache | lcache-errors | cli | sdb | snmp | nb |

No

show system internal adjmgr internal info

No

show system internal adjmgr internal sdb

No

show system internal adjmgr library-info

No

show system internal adjmgr notify interval

No

show system internal aipc event-history errors

No

show system internal aipc event-history msgs

No

show system internal ascii-cfg errors

No

show system internal ascii-cfg event-history

No

show system internal ascii-cfg mem-stats [ detail ]

No

show system internal ascii-cfg runtime info

No

show system internal ascii-cfg transit-table

Yes

show system internal bfd eng all

No

show system internal bfd event-history [ session <hex_disc> ]

No

show system internal bfd event-history all

No

show system internal bfd event-history errors

No

show system internal bfd event-history logs

No

show system internal bfd event-history msgs

No

show system internal bfd event-history session [ dead ]

No

show system internal bfd event-history session <hex_disc> <log_name>

No

show system internal bfd event-history session client <client_id>

No

show system internal bfd event-history session intf <intf_id>

No

show system internal bfd event-history session module <module_id>

No

show system internal bfd global

Yes

show system internal bfd memstat [ details ]

No

show system internal bfd module-cache

Yes

show system internal bfd sess-store [ session <hex_disc> ]

Yes

show system internal bfd sess-store client [ <int_client> ]

Yes

show system internal bfd sess-store interface [ <intf> ]

Yes

show system internal bfd sess-store ip-intf all

Yes

show system internal bfd sess-store module [ <int_lc> ]

Yes

show system internal bfd sess-store module2 [ <int_lc> ]

Yes

show system internal bfd sess-store neighbor { <neighbor_ip> | <neighbor_ipv6> } [ intf <intf_id> ]

Yes

show system internal bfd status

Yes

show system internal bfd transition-history [ session <hex_disc> ]

No

show system internal bfd transition-history client <client_id>

No

show system internal bfd transition-history dead

No

show system internal bfd transition-history intf <intf_id>

No

show system internal bfd transition-history module <module_id>

No

show system internal bfd-app log

Yes

show system internal bfd-app memstat [ details ]

No

show system internal bfd-app session { all | <hex_disc> }

Yes

show system internal biosd messages [ module <module> ]

No

show system internal bloggerd event-history errors

No

show system internal bloggerd event-history events

No

show system internal bloggerd event-history movelog-errors

No

show system internal bloggerd event-history msgs

No

show system internal bloggerd info { global-info | stats | threads | log-dump-info }

No

show system internal bloggerd mem-stats [ detail ]

No

show system internal bootvar log

No

show system internal buffers [ { [ all <count> ] [ free <count> ] } ]

No

show system internal callhome event-history

No

show system internal callhome mem-stats [ detail ]

No

show system internal capability

No

show system internal capability event-history errors

No

show system internal capability event-history msgs

No

show system internal capability event-history stats

No

show system internal capability mem-stats [ detail ]

No

show system internal capability module <module> [ { dynamic [ [ type <i0> ] [ hex-dump ] ] | static } ]

No

show system internal cardclient cb

No

show system internal cardclient devrev

No

show system internal cardclient get-vdc

No

show system internal cardclient lcsm

No

show system internal cardclient lcsm_cb

No

show system internal cardclient logs

No

show system internal cardclient memory

No

show system internal cardclient msgs

No

show system internal cert-enroll event-history errors

No

show system internal cert-enroll event-history msgs

No

show system internal cert-enroll mem-stats [ detail ]

No

show system internal clk_mgr { stop | start } intra-chassis sync

No

show system internal clk_mgr event-history errors

No

show system internal clk_mgr event-history msgs

No

show system internal clk_mgr get clock samples

Yes

show system internal clk_mgr get reference-port-ts interface <if0>

No

show system internal clk_mgr info { all | global }

No

show system internal clk_mgr info { sup_updates | ptp_updates }

No

show system internal clk_mgr mem-stats [ detail ]

No

show system internal clk_mgr set lc-clocks interface <if0>

No

show system internal confcheck capability supported { active | system1 <uri0> }

No

show system internal confcheck capability used

No

show system internal confcheck cards-supported [ <uri0> ]

No

show system internal confcheck event-history errors

No

show system internal confcheck event-history msgs

No

show system internal confcheck summary

No

show system internal config-profile applied-config database

Yes

show system internal config-profile config database

Yes

show system internal config-profile history [ apply | unapply | refresh ] [ success | failure ]

No

show system internal copp [ event-history ] acl-fsm logs

No

show system internal copp [ event-history ] bpp-debug-info

No

show system internal copp [ event-history ] errors

No

show system internal copp [ event-history ] logs

No

show system internal copp [ event-history ] msgs

No

show system internal copp info [ detail ]

No

show system internal copp mem-stats [ detail ]

No

show system internal copp ppf-database { policy { subscriptions | sessions | instances | all } }

No

show system internal copp res-client database

No

show system internal copp shadow-policy { strict | moderate | lenient | dense }

Yes

show system internal crdcfg apitest card <i0>

No

show system internal crdcfg apitest chassis

No

show system internal crdcfg apitest dev_ifidx <i0> slot <i1> port <i2>

No

show system internal crdcfg apitest device <i0>

No

show system internal crdcfg apitest device <i0> mod <i1>

No

show system internal crdcfg apitest role <i0> mod <i1>

No

show system internal crdcfg cards

No

show system internal crdcfg cards brief

No

show system internal crdcfg cb

No

show system internal crdcfg devid_slot devid <i0> slot <i1> <i2>

No

show system internal crdcfg events

No

show system internal crdcfg feature_slot featureid <i0> slot <i1>

No

show system internal crdcfg lcsm

No

show system internal crdcfg lcsm_cb

No

show system internal crdcfg logs

No

show system internal crdcfg memory

No

show system internal crdcfg msgs

No

show system internal crdcfg req

No

show system internal csm info { global-db | switch-profile [ <sw-prof-name> ] <db0> | ssn-db <ssn-name> } <tbl0> [ detail ]

No

show system internal csm info issu-blocking-configs

No

show system internal csm info trace

No

show system internal csm info transport [ detail ]

No

show system internal dhclient database { policy { subscriptions | sessions | instances | all } }

No

show system internal dhclient event-history errors

No

show system internal dhclient event-history msgs

No

show system internal dhclient mem-stats [ detail ]

No

show system internal dhclient status

No

show system internal dir tmp

No

show system internal dme { events | faults }

No

show system internal dme { policyelem | eventmgr | confelem } mem-stats [ detail ]

No

show system internal dme { running-config | startup-config | applied-config | hidden-config } [ all ] [ dn <dn_string> ]

No

show system internal dme meta-mode

No

show system internal dme objstore debugs sap <i0>

No

show system internal dme objstore errors sap <i0>

No

show system internal dme retries

No

show system internal dme rollbacks history

No

show system internal dme transactions { current | pending }

No

show system internal dme transactions history

No

show system internal eltm [ event-history ] debugs

No

show system internal eltm [ event-history ] msgs

No

show system internal eltm error count

No

show system internal eltm event-history errors

No

show system internal eltm event-history interface <if_name>

Yes

show system internal eltm event-history pss

No

show system internal eltm event-history trace

No

show system internal eltm event-history trace detail

No

show system internal eltm global info

Yes

show system internal eltm info [ global ]

No

show system internal eltm info interface { <if_name> | brief | summary | all }

Yes

show system internal eltm info outer_bd

Yes

show system internal eltm info src_index [ <value> ] [ detail ]

Yes

show system internal eltm info vlan { <vlan_value> | brief | summary | all }

Yes

show system internal eltm ipmc index info

No

show system internal eltm mem-stats [ detail ]

No

show system internal emon event-log

No

show system internal emon fsm-log { eobc | epc }

No

show system internal emon stats

No

show system internal epld logging

No

show system internal ethdstats clear <if0>

No

show system internal ethdstats delta <if0>

No

show system internal ethdstats event-history errors

No

show system internal ethdstats event-history msgs

No

show system internal ethdstats mem-stats [ detail ]

No

show system internal ethdstats one <if0> offset <i0>

No

show system internal ethdstats snmpdelta <if0>

No

show system internal ethpm [ event-history ] errors

No

show system internal ethpm [ event-history ] lock

No

show system internal ethpm [ event-history ] msgs

No

show system internal ethpm event-history interface <if0> [ last <i0> ]

No

show system internal ethpm event-history loopback [ last <i0> ]

No

show system internal ethpm event-history module <module> [ last <i1> ]

No

show system internal ethpm info [ { global | interface <if0> | dme-buffer | vlan-ref-cnt | all } ]

No

show system internal ethpm mem-stats [ detail ]

No

show system internal fabric connectivity [ module <module> ]

No

show system internal feature-mgr event-history errors

No

show system internal feature-mgr event-history msgs

No

show system internal feature-mgr event-history objstr-errors

No

show system internal feature-mgr event-history objstr-events

No

show system internal feature-mgr feature <f> current status

No

show system internal feature-mgr feature action

No

show system internal feature-mgr feature state

No

show system internal feature-mgr feature-set state

No

show system internal flash

Yes

show system internal forwarding [ { vrf { <vrf-name> | <vrf-known-name> | vrf-all } } ] adjacency [ module <module> | instance { <instance> | all } | entry

Yes

show system internal forwarding [ { vrf { <vrf-name> | <vrf-known-name> | vrf-all } } ] ipv6 adjacency [ module <module> | instance { <instance> | all } |

Yes

show system internal forwarding [ { vrf { <vrf-name> | <vrf-known-name> | vrf-all } } | { table <table-id> } ] [ ip | ipv4 ] multicast route [ [ instance {

Yes

show system internal forwarding [ { vrf { <vrf-name> | <vrf-known-name> | vrf-all } } | { table <table-id> } ] [ ip | ipv4 ] route [ max-display-count <dis

Yes

show system internal forwarding [ { vrf { <vrf-name> | <vrf-known-name> | vrf-all } } | { table <table-id> } ] ipv6 multicast route [ module <module> | ins

Yes

show system internal forwarding [ { vrf { <vrf-name> | <vrf-known-name> | vrf-all } } | { table <table-id> } ] ipv6 route [ max-display-count <display_coun

Yes

show system internal forwarding [ ip | ipv4 ] route summary [ module <module> ] [ instance <instance> ]

Yes

show system internal forwarding adjacency multicast { group <igroup> [ [ vrf <ivrfname> ] | [ [ source <isrc> [ vrf <ivrfname> ] ] ] ] | entry <iipmcgrp_i

Yes

show system internal forwarding distribution multicast destination-index [ <index> ]

Yes

show system internal forwarding distribution multicast outgoing-interface-list { L2 | L3 } [ <index> ]

Yes

show system internal forwarding distribution replicator-db

Yes

show system internal forwarding distribution trace pd-config

No

show system internal forwarding distribution trace pd-config bitmask

No

show system internal forwarding distribution trace pd-history

No

show system internal forwarding distribution trace pd-history bitmask

No

show system internal forwarding interface [ <tunnelnum> ]

No

show system internal forwarding ipv6 route summary [ module <module> ] [ instance <instance> ]

Yes

show system internal forwarding ipv6 table <table-id> summary [ module <module> ]

Yes

show system internal forwarding l2 multicast { [ pending-hwinstall ] | [ { vlan <vlan-id> { [ group <grpaddr> [ source <srcaddr> ] ] | [ destination-ma

Yes

show system internal forwarding table <table-id> summary [ module <module> ]

Yes

show system internal forwarding unicast counters

Yes

show system internal frame traffic

No

show system internal fs-daemon device-info

No

show system internal fs-daemon event-history errors

No

show system internal fs-daemon event-history msgs

No

show system internal fs-daemon fsdetails

No

show system internal fs-daemon log

No

show system internal fs-daemon mount-unmount-history

No

show system internal fu-errors sap <i0>

No

show system internal fu-state sap <i0>

No

show system internal gpixm errors

No

show system internal gpixm event-history { tcb <rid> | last_txns | last_errors | all | detail }

No

show system internal gpixm event-history msgs

No

show system internal gpixm info [ { global-info | ltl-type { mcast-grp | span | md | phy | port-channel | sat-port | fc-pc | e8 | inband | rpc | gpc |

No

show system internal gpixm mem-stats [ detail ]

No

show system internal icmpv6 { library-info | fastboot-cache }

No

show system internal icmpv6 buffers [ { [ all <count> ] [ free <count> ] } ]

No

show system internal icmpv6 cache { { brief | detail } | { interface [ <intf> ] } } [ operational ]

No

show system internal icmpv6 client [ <client-name> ]

No

show system internal icmpv6 internal { mem-stats [ shared | all ] [ no-libs ] [ detail ] }

No

show system internal icmpv6 internal info

No

show system internal im [ event-history ] errors

No

show system internal im [ event-history ] lock

No

show system internal im [ event-history ] msgs

No

show system internal im [ event-history ] trace

No

show system internal im event-history interface <if0> [ last <i0> ]

No

show system internal im event-history module <module> [ last <module> ]

No

show system internal im event-history vdc <e-vdc> [ last <e-vdc> ]

No

show system internal im info [ { global | module <module> | vdc <e-vdc> | interface <if0> } ]

No

show system internal im mem-stats [ detail ]

No

show system internal im-errors sap <i0>

No

show system internal interface <ii-intf-name> counters

No

show system internal interface counters detail module <module>

No

show system internal interface counters module <module> [ nz ]

No

show system internal interface counters peak module <module> [ nz ]

No

show system internal ip igmp snooping { [ summary-list ] | [ pending-hwinstall ] | [ [ vdc <vdc-id> ] [ vlan <vlan-id> [ group <grpaddr> [ source <src

Yes

show system internal ip igmp snooping swindex { <swidx> | swindex-tbl }

Yes

show system internal ipconf internal [ event-history ] errors

No

show system internal ipconf internal [ event-history ] msgs

No

show system internal ipfib [ event-history ] errors

No

show system internal ipfib [ event-history ] msgs

No

show system internal ipfib mem-stats [ detail ]

No

show system internal ipqos class-map [ type <qos-or-q> ] [ <cmap-name> ]

Yes

show system internal ipqos class-map type network-qos [ <cmap-name-nq> ]

Yes

show system internal ipqos dcbxp context { all | interface <iface-num> }

No

show system internal ipqos dcbxp fsm interface <iface-num>

No

show system internal ipqos event-history config session <ses_id>

No

show system internal ipqos event-history config session all

No

show system internal ipqos event-history distribution

No

show system internal ipqos event-history errors

No

show system internal ipqos event-history interface <if0>

No

show system internal ipqos event-history interface all

No

show system internal ipqos event-history locks

No

show system internal ipqos event-history msgs

No

show system internal ipqos event-history mts-msgs

No

show system internal ipqos event-history sessions

No

show system internal ipqos global-defaults

No

show system internal ipqos info [ global ]

No

show system internal ipqos locks

No

show system internal ipqos log

No

show system internal ipqos mem-stats [ detail ]

No

show system internal ipqos msg-log

No

show system internal ipqos policy-map [ type <qos-or-q> ] [ <pmap-name> ]

Yes

show system internal ipqos policy-map statistics { interface [ <iface-list> ] [ input | output ] [ type <qos-or-q> ] | vlan [ <vlan-list> ] [ inputx |

No

show system internal ipqos policy-map type network-qos [ <pmap-name-nq> ]

Yes

show system internal ipqos port-node [ <if-index> ]

Yes

show system internal ipqos ppf { control [ all-sessions | error-sessions | modify-sessions | request-sessions | subscription ] }

No

show system internal ipqos ppf nodeid <id>

No

show system internal ipqos ppf-lib

No

show system internal ipqos session

No

show system internal ipqos session context [ <sname> ]

No

show system internal ipqos shared-policer [ <policer-name> ]

No

show system internal ipqos snmp cmap [ <cmap-index-in> ]

Yes

show system internal ipqos snmp cmap-stats [ { [ <policy-index-in> ] [ <obj-index-in> ] } ]

Yes

show system internal ipqos snmp interface-table [ { [ <if-index-in> ] [ <inp-or-out-in> ] } ]

Yes

show system internal ipqos snmp match [ <match-index-in> ]

Yes

show system internal ipqos snmp match-stats [ { [ <policy-index-in> ] [ <obj-index-in> ] } ]

Yes

show system internal ipqos snmp object-table [ { [ <policy-index-in> ] [ <obj-index-in> ] } ]

Yes

show system internal ipqos snmp pmap [ <pmap-index-in> ]

Yes

show system internal ipqos snmp police-action [ <police-index-in> ]

Yes

show system internal ipqos snmp police-stats [ { [ <policy-index-in> ] [ <obj-index-in> ] } ]

Yes

show system internal ipqos snmp queuing [ <que-index-in> ]

Yes

show system internal ipqos snmp queuing-stats [ { [ <policy-index-in> ] [ <obj-index-in> ] } ]

Yes

show system internal ipqos snmp random-detect [ <red-index-in> ]

Yes

show system internal ipqos snmp service-policy [ <policy-index-in> | <if-index> ]

Yes

show system internal ipqos snmp set-action [ <set-index-in> ]

Yes

show system internal ipqos snmp shape [ <tsc-index-in> ]

Yes

show system internal ipqos snmp shape-stats [ { [ <policy-index-in> ] [ <obj-index-in> ] } ]

Yes

show system internal ipqos snmp tmap [ <tmap-index-in> ]

Yes

show system internal ipqos snmp tmap-set-action [ <tmap-set-index-in> ]

Yes

show system internal ipqos snmp tmap-value [ { [ <tmap-index-in> ] [ <tmap-value-in> ] } ]

Yes

show system internal ipqos snmp wredclass [ { [ <redclass-index-in> ] [ <red-value-in> ] } ]

Yes

show system internal ipqos statistics bucket [ <bucket_index> ]

No

show system internal ipqos status

Yes

show system internal ipqos system defaults [ factory-settings ]

Yes

show system internal ipqos system-node

Yes

show system internal ipqos table-map [ <tmap-name> ]

No

show system internal ipqos usr-ses fsm { all | ssn-id <id> }

No

show system internal ipqos vlan-tbl <vlan-range>

Yes

show system internal ipqos vlmgr fsm { global | ssn-id <id> }

No

show system internal ipqos vlmgr info

Yes

show system internal kernel aipc

No

show system internal kernel aipc-mcast

No

show system internal kernel cpuhogmon

No

show system internal kernel cpuinfo

No

show system internal kernel ide-statistics

No

show system internal kernel internal preempt-stats

No

show system internal kernel malloc-stats [ detail ]

No

show system internal kernel meminfo

No

show system internal kernel memory all

No

show system internal kernel memory global [ detail ]

No

show system internal kernel memory libdep <s0>

No

show system internal kernel memory service <s0>

No

show system internal kernel memory usage

No

show system internal kernel memory uuid <i0>

No

show system internal kernel messages

No

show system internal kernel nvram-messages [ <s0> ]

No

show system internal kernel skb-stats [ detail ]

No

show system internal kernel trace

No

show system internal kernel vmalloc-info

No

show system internal keychain state

No

show system internal l2fm [ event-history ] debugs

No

show system internal l2fm [ event-history ] errors

No

show system internal l2fm [ event-history ] mac-sdb

No

show system internal l2fm [ event-history ] msgs

No

show system internal l2fm info { summary | detail [ vlan <vlan> ] | target-list | agedb [ vlan_id <vlan-id> ] [ interface <interface-name1> ] | pcdb [ int

Yes

show system internal l2fm info rvtepdb

No

show system internal l2fm info sdbinfo

No

show system internal l2fm info stagedb [ vlan <vlan-id> | peer-ip <peer-ipv4> ]

No

show system internal l2fm info vrmac-cache

No

show system internal l2fm l2dbg config { macdb | portdb | rvtepdb }

No

show system internal l2fm l2dbg config macdb address <mac-add> vlan <vid>

No

show system internal l2fm l2dbg config portdb ifindex <ifidx> vlan <vid>

No

show system internal l2fm l2dbg macdb [ address <mac-addr> ] [ vlan <id> ]

No

show system internal l2fm l2dbg portdb [ ifindex <index> ] [ vlan <id> ]

No

show system internal l2fm l2dbg rvtepdb [ peerid <peer_id> ] [ peerip <peerip> ] [ remote <vpc_peerid> ]

No

show system internal l2fm mem-stats [ detail ]

No

show system internal l2fm ppf { policy { subscriptions | sessions | instances | nodes | control } }

No

show system internal l2fwder acl

No

show system internal l2fwder bd

No

show system internal l2fwder buffers [ { [ all <count> ] [ free <count> ] } ]

No

show system internal l2fwder cache { { brief | detail } | { interface [ <intf> ] } } [ operational ]

No

show system internal l2fwder event-history { errors | msgs | events | fdb | ha }

No

show system internal l2fwder mac

No

show system internal l2fwder mem-stats [ no-libs ] [ detail ]

No

show system internal l2fwder plugins

No

show system internal l2fwder vacl

No

show system internal l2mcast info global [ module <num> ]

No

show system internal l2mcast info statistics [ module <num> ]

Yes

show system internal l2mcast platform statistics [ module <num> ]

Yes

show system internal l2pt event-history errors

No

show system internal l2pt event-history events

No

show system internal l2pt event-history messages

No

show system internal l2pt mem-stats [ detail ]

No

show system internal l2pt port-state [ vlan <vlan-id> ]

Yes

show system internal l2rib event-history { errors | topology | tx-infra | client-table | mac | rmac | mac-ip | ead-pl | misc-obj | client-events [ <cli

No

show system internal l3vm

No

show system internal l3vm event-history { pss | errors | mts | reinit | msgs | cli | vrf | topology | ksink }

No

show system internal l3vm library-info

No

show system internal l3vm mem-stats [ detail ]

No

show system internal l3vm pss [ running-config-pss | startup-config-pss ]

No

show system internal l3vm sdb { vrf | topology | interface | tables | as-format }

No

show system internal l3vm snmp { vrf [ detail ] | interface | scalars }

No

show system internal lcnd event-history errors

No

show system internal lcnd event-history trace

No

show system internal license event-history

No

show system internal license event-history error

No

show system internal license mem-stats [ detail ]

No

show system internal lim [ event-history ] debugs

No

show system internal lim [ event-history ] errors

No

show system internal lim [ event-history ] lock

No

show system internal lim [ event-history ] msgs

No

show system internal lim [ event-history ] traces

No

show system internal lim counters [ { timeline | interface <i0> } ]

No

show system internal lim event-history interface <if0> [ last <i0> ]

No

show system internal lim event-history pseudowire [ last <i0> ]

No

show system internal lim event-history vfi [ last <i0> ]

No

show system internal lim event-history vni [ last <i0> ]

No

show system internal lim info [ { global | interface <if0> | all } ]

No

show system internal lim mem-stats [ detail ]

No

show system internal loader configuration

No

show system internal log boot kickstart

No

show system internal log boot system1

No

show system internal log install

No

show system internal log install details

No

show system internal log install history

No

show system internal log install issu-failure-reason

No

show system internal log install-module

No

show system internal log issu-helper

No

show system internal log issu-lxc

No

show system internal log issu-lxc lc

No

show system internal log issu-lxc lc history

No

show system internal log issu-lxc sup

No

show system internal log issu-lxc sup history

No

show system internal log issu-lxc vmm

No

show system internal log issu-lxc vmm history

No

show system internal log patch-installer

No

show system internal log sysmgr cfgctrl

No

show system internal log sysmgr failed-standby

No

show system internal log sysmgr gsyncctrl

No

show system internal log sysmgr infra-convert

No

show system internal log sysmgr patchctrl

No

show system internal log sysmgr rtdbctrl

No

show system internal log sysmgr show-tech-ha-failed-standby

No

show system internal log sysmgr standby-sup-reset

No

show system internal log sysmgr sup-reset

No

show system internal log sysmgr vdc { <e-vdc2> | <vdc-id> } cfgctrl

No

show system internal log sysmgr vdc { <e-vdc2> | <vdc-id> } failed-standby

No

show system internal log sysmgr vdc { <e-vdc2> | <vdc-id> } standby-sup-reset

No

show system internal log sysmgr vdc { <e-vdc2> | <vdc-id> } sup-reset

No

show system internal log sysmgr verctrl

No

show system internal log sysmgr warm-swover

No

show system internal m2rib ftag [ <ftag-id> ]

Yes

show system internal m2rib internal [ event-history ] debugs

No

show system internal m2rib internal [ event-history ] errors

No

show system internal m2rib internal [ event-history ] msgs

No

show system internal m2rib internal event-history [ brief ]

No

show system internal m2rib internal mem-stats [ detail ]

No

show system internal m2rib topo [ <topo-id> ]

Yes

show system internal m2rib transactions announced

No

show system internal m2rib transactions eltm [ errors-only ]

No

show system internal m2rib transactions mfdm [ errors-only ]

No

show system internal m2rib transactions open

No

show system internal m2rib transactions pixm [ errors-only ]

No

show system internal m2rib transactions received [ errors-only ]

No

show system internal m2rib transactions u2rib [ errors-only ]

No

show system internal m2rib vlan [ <vlan-id> ]

Yes

show system internal memory-alerts-log

No

show system internal memory-status

No

show system internal memory-usage-per-module [ in-KB ]

No

show system internal mfdm [ event-history ] debugs

No

show system internal mfdm [ event-history ] errors

No

show system internal mfdm [ event-history ] msgs

No

show system internal mfdm info [ global ]

No

show system internal mfdm info oiflist delayed-free-queue [ summary ]

Yes

show system internal mfdm info statistics

Yes

show system internal mfdm info statistics clear

No

show system internal mfdm mem-stats [ detail ]

No

show system internal mfwd

No

show system internal mfwd { library-info | iod-cache }

No

show system internal mfwd debug

No

show system internal mfwd errors

No

show system internal mfwd event-history { errors | msgs | <mfwd-event-hist-buf-name> | statistics }

No

show system internal mfwd interface [ vrf { <vrf-name> | <vrf-known-name> | all } ]

No

show system internal mfwd ip { mrib-txlist [ vrf { <vrf-name> | <vrf-known-name> | all } ] | mrib-buffers }

No

show system internal mfwd ip mroute [ vrf { <vrf-name> | <vrf-known-name> | all } ]

No

show system internal mfwd ip vrf all [ detail ]

No

show system internal mfwd l2 mac [ detail ] [ vlan <vlan-id> ]

No

show system internal mfwd l2 mapping vlan <vlan-id> { source <source> | mac <source-mac> }

No

show system internal mfwd l2 mroute [ vlan <vlan-id> ] [ detail ]

No

show system internal mfwd l2 mroute { txlist [ vlan <vlan-id> ] | buffers }

No

show system internal mfwd l2 vlan brief

No

show system internal mfwd mem-stats [ shared | all ] [ no-libs ] [ detail ]

No

show system internal mfwd mroute status

No

show system internal mfwd pim-cache [ vrf { <vrf-name> | <vrf-known-name> | all } ]

No

show system internal mmode event-history errors

No

show system internal mmode event-history msgs

No

show system internal mmode logfile

No

show system internal mmode mem-stats [ detail ]

No

show system internal modlock-info

No

show system internal mplsfwd event-history { errors | msgs | ipc | ha | log }

No

show system internal mplsfwd info

No

show system internal mplsfwd mem-stats [ no-libs ] [ detail ]

No

show system internal mts appcode <i0> opcodes

No

show system internal mts buffers

No

show system internal mts buffers age <i0>

No

show system internal mts buffers details

No

show system internal mts buffers node <s0>

No

show system internal mts buffers order

No

show system internal mts buffers print <mtsbuf_offset> [ size <size> ]

No

show system internal mts buffers sap <i0>

No

show system internal mts buffers summary

Yes

show system internal mts event-history errors

No

show system internal mts event-history msgs

No

show system internal mts ha active_stats

No

show system internal mts ha gsync_state

No

show system internal mts ha sequence-numbers

No

show system internal mts ha standby_stats

No

show system internal mts ha sync_mode

No

show system internal mts lc apps

No

show system internal mts lc basket { content | stats }

No

show system internal mts lc registry { log | persistent | register }

No

show system internal mts lc sap <i0> { description | lqueue | nq | options | pid | pqueue | queue | queue_stats | rcount | registry | stats | uuid }

No

show system internal mts lc state { current | history }

No

show system internal mts lc trace

No

show system internal mts memory

No

show system internal mts node <s0> apps

No

show system internal mts node <s0> basket { content | stats }

No

show system internal mts node <s0> registry { log | persistent | register }

No

show system internal mts node <s0> sap <i0> { description | lqueue | nq | options | pid | pqueue | queue | queue_stats | rcount | registry | stats | uuid

No

show system internal mts node <s0> state { current | history }

No

show system internal mts node <s0> trace

No

show system internal mts opcodes

No

show system internal mts sup apps

No

show system internal mts sup basket { content | stats }

No

show system internal mts sup registry { log | persistent | register }

No

show system internal mts sup sap <i0> { description | lqueue | nq | options | pid | pqueue | queue | queue_stats | rcount | registry | stats | uuid }

No

show system internal mts sup state { current | history }

No

show system internal mts sup trace

No

show system internal npacl [ ppf | [ acl [ <acl-name> | all ] ] ]

No

show system internal npacl event-history [ acl | ppf | cli | all ]

No

show system internal npacl event-history buffer-size { acl | ppf | cli | internal | all }

No

show system internal npacl mem-stats { [ shared | all ] [ no-libs ] [ detail ] }

No

show system internal orib { event-history { errors | msgs | <orib-event-hist-buf-name> | statistics } | shared-database | pss | performance | platform |

No

show system internal orib cleanup

No

show system internal orib clients

No

show system internal orib convergence

No

show system internal orib errors

No

show system internal orib ha

No

show system internal orib mroute vlan <vlan-id> source <saddr> group <gaddr>

No

show system internal orib vlan

No

show system internal patch-installer event-history errors

No

show system internal patch-installer event-history msgs

No

show system internal patch-installer event-history plugin-trace

No

show system internal patch-installer event-history trace

No

show system internal patch-installer ha-info

No

show system internal pfmd internal event-history errors

No

show system internal pfmd internal event-history msgs

No

show system internal pfstat [ event-history ] debugs

No

show system internal pfstat [ event-history ] errors

No

show system internal pfstat [ event-history ] msgs

No

show system internal pfstat [ event-history ] vsan <i0>

No

show system internal pfstat clear counters

No

show system internal pfstat counters

Yes

show system internal pfstat event-history sysev

No

show system internal pfstat info [ { global | vsan <i0> } ]

No

show system internal pfstat info interface if_name

No

show system internal pfstat info sw global

Yes

show system internal pfstat mem-stats [ detail ]

No

show system internal pixm errors

No

show system internal pixm event-history { tcb <rid> | last_txns | last_errors | all | detail }

No

show system internal pixm event-history msgs

No

show system internal pixm info [ { global-info | ltl-type { bd [ detail ] | mcast-grp | span | md | phy | port-channel | sat-port | fc-pc | e8 | inban

No

show system internal pixm mem-stats [ detail ]

No

show system internal pktmgr cache { { { brief | detail } | { interface [ <intf> ] } | { vlan [ <vl> ] } | { pc [ <pc-intf> ] } | { sub-intf [ <parent-intf>

No

show system internal pktmgr client { [ <uuid> ] | { filter } } { [ brief ] | [ detail ] }

No

show system internal pktmgr debug

No

show system internal pktmgr fp-topo-cache

No

show system internal pktmgr frame-pps-history { inband | mgmt | titan }

No

show system internal pktmgr interface { { { brief } | [ <interface> ] | [ iod <iod> ] } [ operational ] [ cache ] }

No

show system internal pktmgr internal { mem-stats [ detail ] | vdc { global-stats | inband [ { <intf> | detail } ] | mgmt [ <ip-addr> ] | mgmt-vdc [ <vdc-id

No

show system internal pktmgr internal event-history { errors | msgs | control | log | ha | pkt-errors | pkt-buffer | lcache-err | lcache-trace | cli }

No

show system internal pktmgr internal event-history buffer-size { errors | control | log | ha | pkt-errors | pkt-buffer | all }

No

show system internal pktmgr libanycast-info { { all | vlan <vlan_id> } { ipv4 | ipv6 } }

No

show system internal pktmgr library-info

No

show system internal pktmgr stats [ brief ]

No

show system internal platform all

No

show system internal platform internal1 [ event-history ] errors

No

show system internal platform internal1 [ event-history ] msgs

No

show system internal platform internal1 all [ module <module> | xbar <santa-cruz-range> ]

No

show system internal platform internal1 event-history module <module>

No

show system internal platform internal1 event-history stats

No

show system internal platform internal1 event-history xbar <santa-cruz-range>

No

show system internal platform internal1 info

No

show system internal platform internal1 mem-stats [ detail ]

No

show system internal platform internal1 sw info

No

show system internal platform internal1 xcvr-cache

No

show system internal plcmgr dictionary [ <dict_type> ]

No

show system internal plcmgr dictionary policy-targets { pname <pmap-name> }

No

show system internal plcmgr event-history cfg-fsm

No

show system internal plcmgr event-history debugs [ detail ]

No

show system internal plcmgr event-history errors

No

show system internal plcmgr event-history msgs

No

show system internal plcmgr mem-stats [ detail ]

No

show system internal plcmgr msg-log [ errors ]

No

show system internal plcmgr pixmdb

No

show system internal plcmgr plan [ last | errored | first-errored ]

No

show system internal plcmgr ppf [ <application> ] { interface <ifnum> [ brief ] | all | <nodeid> }

No

show system internal plcmgr ppf { info { subscriptions | sessions | instances | all } }

No

show system internal plcmgr ppf nodeid <id>

No

show system internal pltfm_config [ event-history ] debugs

No

show system internal pltfm_config [ event-history ] errors

No

show system internal pltfm_config [ event-history ] msgs

No

show system internal pltfm_config [ event-history ] vsan <i0>

No

show system internal pltfm_config acl-capture

No

show system internal pltfm_config info [ { global | vsan <i0> } ]

No

show system internal pltfm_config info all

No

show system internal pltfm_config mem-stats [ detail ]

No

show system internal plugin event-history errors

No

show system internal plugin event-history fsm { load [ vdc <i0> ] | unload [ vdc <i1> ] }

No

show system internal plugin event-history msgs

No

show system internal plugin info [ global ]

No

show system internal plugin mem-stats [ detail ]

No

show system internal policyelem objstore dump-logs

No

show system internal port-client control-cmds

No

show system internal port-client event-history all

No

show system internal port-client event-history errors

No

show system internal port-client event-history gold <i0>

No

show system internal port-client event-history gold all

No

show system internal port-client event-history gold hw_port <i0>

No

show system internal port-client event-history gold hw_port all

No

show system internal port-client event-history hw-port <i0>

No

show system internal port-client event-history hw-port all

No

show system internal port-client event-history info

No

show system internal port-client event-history msgs

No

show system internal port-client event-history port <i0>

No

show system internal port-client event-history port all

No

show system internal port-client info

No

show system internal port-client info eth-hw-port <i0>

No

show system internal port-client info eth-port <i0>

No

show system internal port-client info global

No

show system internal port-client info inb-hw-port <i0>

No

show system internal port-client info inb-port <i0>

No

show system internal port-client link-event

No

show system internal port-client log-level

No

show system internal port-client mem-stats [ detail ]

No

show system internal port-client timestamp-control

No

show system internal port-client timestamp-update

No

show system internal port-profile [ event-history ] errors

No

show system internal port-profile [ event-history ] msgs

No

show system internal port-profile command-cache

Yes

show system internal port-profile event-queue

Yes

show system internal port-profile interface database

Yes

show system internal port-profile interface-fsm

No

show system internal port-profile mem-stats [ detail ]

No

show system internal port-profile profile-fsm

No

show system internal processes cpu

No

show system internal processes cpu <i0>

No

show system internal processes memory

No

show system internal pss dump <s0>

No

show system internal pss event-history sap <i0>

No

show system internal pss files

No

show system internal pss flatfile trace <s0>

No

show system internal pss kernel list

No

show system internal pss kernel memstats

No

show system internal pss kernel timestats [ clear ]

No

show system internal psshelper { modules | gsdbs | pending }

No

show system internal psshelper event-history errors

No

show system internal psshelper event-history msgs

No

show system internal psshelper global-svc { modules | gsdbs | pending }

No

show system internal psshelper global-svc event-history errors

No

show system internal psshelper global-svc gsdb-requests

No

show system internal psshelper global-svc mem-track-stats [ detail ]

No

show system internal psshelper global-svc vmm-msgs

No

show system internal psshelper gsdb-requests

No

show system internal psshelper mem-track-stats [ detail ]

No

show system internal psshelper vmm-msgs

No

show system internal qos [ vdc-id <vdc_id> ] [ interface <if_name> | vlan <vlan_id> | copp ] [ { input | output } ] [ config | entries ] [ module <num>

Yes

show system internal qos [ vdc-id <vdc_id> ] [ interface <if_name> | vlan <vlan_id> | copp ] [ { input | output } ] [ config | entries ] [ module <num>

Yes

show system internal qos default-tables [ { { ingress_prec_mutation | ingress_dscp_mutation | ingress_cos_mutation } [ table <table_id> ] } | markdown

No

show system internal qos network-qos { hw-config | stats } [ module <num> ]

No

show system internal qos policer { config [ { aggr | dist | prof } [ index <index> ] ] | stats | master | global [ counters ] } [ module <num> ]

No

show system internal qos queuing { config [ interface <if_name> ] | stats interface <if_name> | locks [ clear ] }

No

show system internal qos rate limiter { config [ { pc | l2 | l3 } [ index <index> ] ] | global } [ module <num> ]

No

show system internal qos resource utilization [ no-header ] [ module <num> ]

No

show system internal radius event-history errors

No

show system internal radius event-history msgs

No

show system internal radius mem-stats [ detail ]

No

show system internal redundancy event-history

No

show system internal redundancy status

No

"show system internal rpm as-path-access-list [ ""<aspl-name>"" | <aspl-known-name> ] "

No

show system internal rpm clients

No

show system internal rpm community-list [ <pname> ]

No

show system internal rpm event-history { errors | msgs | trace | events | rsw }

No

show system internal rpm extcommunity-list [ <pname> ]

No

"show system internal rpm ip-prefix-list [ ""<ipv4-pfl-name>"" | <ipv4-pfl-known-name> ] "

No

"show system internal rpm ipv6-prefix-list [ ""<ipv6-pfl-name>"" | <ipv6-pfl-known-name> ] "

No

show system internal rpm library-info

No

show system internal rpm mac-list [ <pname> ]

No

show system internal rpm mem-stats [ shared | all ] [ detail ]

No

show system internal rpm ppf

No

"show system internal rpm route-map [ ""<route-map-name>"" | <route-map-known-name> ] [ ppf ] "

No

show system internal rpm state

No

show system internal rwsem { sap summary | sap <sap> | sap raw | client summary | client <uuid> | client raw }

No

show system internal sal [ event-history ] errors

No

show system internal sal [ event-history ] msgs

No

show system internal sal debugs

No

show system internal sal info database vlan [ <vlan-id> | brief ]

No

show system internal sal info database vrf [ <vrf-name> | brief ]

No

show system internal sal info global

No

show system internal sal mem-stats [ uuid <i0> ] [ sal-only ] [ detail ]

No

show system internal sctptun all

No

show system internal sctptun conn-stat [ <fex> ]

No

show system internal sctptun drv-info

No

show system internal sctptun event-history

No

show system internal sctptun proc-stats

No

show system internal sctptun sctp-associations

No

show system internal sctptun sctp-statistics

No

show system internal sdwrap buffers [ sap <sap-num> ]

No

show system internal sdwrap buffers [ sap <sap-num> ] detailed

No

show system internal sdwrap errors sap <i0>

No

show system internal security accelerator-test <i0>

No

show system internal security event-history errors

No

show system internal security event-history msgs

No

show system internal security mem-stats [ detail ]

No

show system internal session-mgr applications

No

show system internal session-mgr event-history errors

No

show system internal session-mgr event-history logs

No

show system internal session-mgr event-history msgs

No

show system internal session-mgr global info | show system internal csm global info

No

show system internal session-mgr global info | show system internal csm global info

No

show system internal session-mgr info [ name <s1> ]

No

show system internal session-mgr mem-stats [ detail ]

No

show system internal session-mgr timeouts

No

show system internal session-mgr transition-history [ name <s2> ]

No

show system internal smm event-history { errors | msgs | <smm-event-hist-buf-name> | statistics }

No

show system internal smm mem-stats shared [ detail ]

No

show system internal smm pss-dump

No

show system internal smm regions { free | allocated | all }

No

show system internal snmp event-history msgs

No

show system internal snmp event-history pktdump

No

show system internal snmp mem-stats [ detail ]

No

show system internal snmp switch-mode

Yes

show system internal spm dictionary [ <application> ]

No

show system internal spm event-history cfg-fsm

No

show system internal spm event-history debugs [ detail ]

No

show system internal spm event-history errors

No

show system internal spm event-history msgs

No

show system internal spm info [ <application> ]

No

show system internal spm mem-stats [ detail ]

No

show system internal spm msg-log [ errors ]

No

show system internal spm plan [ last | errored | first-errored ]

No

show system internal spm ppf [ <application> ] { interface <ifnum> [ brief ] | all | <nodeid> }

No

show system internal spm ppf { info { subscriptions | sessions | instances | all } }

No

show system internal sse all-srv-ids

No

show system internal sse case

No

show system internal sse list

No

show system internal sse loop

No

show system internal sse stub

No

show system internal statsclient [ event-history ] msgs

No

show system internal statsclient cb

No

show system internal statsclient errpoll

No

show system internal statsclient event-history errors

No

show system internal statsclient event-history trace

No

show system internal statsclient logs

No

show system internal statsclient memory

No

show system internal statsclient pc_clr <i0> port <i1>

No

show system internal statsclient pc_get <i0> port <i1>

No

show system internal statsclient pc_mod <i0>

No

show system internal statsclient pcl_cb

No

show system internal statsclient pktflow async <i0> port <i1> <i2>

No

show system internal statsclient pktflow sync <i0> port <i1>

No

show system internal statsclient qos <i0> port <i1> devid <i2>

No

show system internal statsclient roles

No

show system internal statsclient scanpoll

No

show system internal stripcl event-history errors

No

show system internal stripcl event-history events

No

show system internal stripcl event-history messages

No

show system internal stripcl mem-stats [ detail ]

No

show system internal sysmgr bootupstats

No

show system internal sysmgr event-history errors

No

show system internal sysmgr event-history msgs

No

show system internal sysmgr gsync-pending

No

show system internal sysmgr gsyncstats

No

show system internal sysmgr nvram-data

No

show system internal sysmgr service all

No

show system internal sysmgr service all details

No

show system internal sysmgr service dependency all_services

No

show system internal sysmgr service dependency srvname <s0>

No

show system internal sysmgr service local

No

show system internal sysmgr service local details

No

show system internal sysmgr service name <s0>

No

show system internal sysmgr service name <s0> policies

No

show system internal sysmgr service name <s0> seqnotbl

No

show system internal sysmgr service name <s0> tag <s1>

No

show system internal sysmgr service not-running

No

show system internal sysmgr service not-running details

No

show system internal sysmgr service pid <i0>

No

show system internal sysmgr service pid <i0> config

No

show system internal sysmgr service pid <i0> log

No

show system internal sysmgr service running

No

show system internal sysmgr service running details

No

show system internal sysmgr service uuid <i0>

No

show system internal sysmgr service uuid <i0> config

No

show system internal sysmgr service uuid <i0> dependencies

No

show system internal sysmgr startup-config locks

No

show system internal sysmgr startup-config state

No

show system internal sysmgr state

No

show system internal sysmgr swoverstats

No

show system internal sysmgr time

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } bootupstats

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } gsyncstats

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } service all

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } service all details

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } service local

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } service local details

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } service name <s0>

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } service name <s0> policies

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } service name <s0> seqnotbl

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } service name <s0> tag <s1>

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } service not-running

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } service not-running details

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } service pid <i1>

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } service pid <i1> config

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } service pid <i1> log

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } service running

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } service running details

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } service uuid <i1>

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } service uuid <i1> config

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } state

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } swoverstats

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } time

No

show system internal sysmgr vdc { <e-vdc2> | <vdc-id> } verifystats

No

show system internal sysmgr verifystats

No

show system internal ttyd line console

No

show system internal u2 errors

No

show system internal u2 mem-stats [ detail ]

No

show system internal ufdm [ event-history ] debugs

No

show system internal ufdm [ event-history ] errors

No

show system internal ufdm [ event-history ] msgs

No

show system internal ufdm info [ { global | vsan <i0> } ]

No

show system internal ufdm mem-stats [ detail ]

No

show system internal urifs

No

show system internal usd errors

No

show system internal usd isr

No

show system internal usd mts

No

show system internal usd timeslice

No

show system internal usd wd

No

show system internal utaker

No

show system internal veobc [ { global | pi | proto | stats } ]

No

show system internal veobc event-history

No

show system internal virtual-service event-history debug

No

show system internal virtual-service utilization statistics CPU

No

show system internal vmm [ event-history ] errors

No

show system internal vmm [ event-history ] module <module>

No

show system internal vmm [ event-history ] msgs

No

show system internal vmm activity module <module>

No

show system internal vmm all [ fex ]

No

show system internal vmm info [ global ]

No

show system internal vmm mem-stats [ detail ]

No

show system internal vpcm info mask [ module <mod> [ source-interface <ch-id> ] ]

No

show system internal vshd config-info

No

show system internal vshd event-history

No

show system internal xbar all

No

show system internal xbar event-history

No

show system internal xbar event-history errors

No

show system internal xbar event-history info

No

show system internal xbar event-history lock

No

show system internal xbar event-history module <module>

No

show system internal xbar event-history msgs

No

show system internal xbar mem-stats [ detail ]

No

show system internal xbar sw

No

show system internal xbar sw details

No

show system internal xos errors

No

show system internal xos info { ipc [ <ipc-name> ] | xdm }

No

show system internal xos traces { ipc | mgd | time | utils | xdm | interface | address | packet | routing | policy }

No

show system kgdb

No

show system memory-thresholds

Yes

show system mode

Yes

show system nve infra-vlans

Yes

show system pss shrink status [ details ]

Yes

show system redundancy ha status

Yes

show system redundancy status

Yes

show system reset-reason

Yes

show system reset-reason <s0> <santa-cruz-range>

Yes

show system reset-reason module <module>

Yes

show system resources

Yes

show system resources [ <i0> ] module <module>

No

show system resources [ <i0> ] module all

No

show system resources <i0>

No

show system routing mode

Yes

show system srg

No

show system standby manual-boot

Yes

show system switch-mode

Yes

show system switchover impact [ <uri0> [ <uri1> ] ]

No

show system uptime

Yes

show system verify bios { flash <i0> [ module <module> ] | protection <i1> [ module <module1> ] }

No

show system vlan reserved

Yes

show table-map [ <tmap-name> | <default-tmap-enum-name> ]

Yes

show tacacs-server

Yes

show tacacs-server { <host0> }

Yes

show tacacs-server directed-request

Yes

show tacacs-server groups [ <s0> ]

Yes

show tacacs-server sorted

Yes

show tacacs-server statistics { <host0> }

Yes

show tamnw internal [ event-history ] errors

No

show tamnw internal [ event-history ] msgs

No

"show tech-support ""tacacs+"" "

No

show tech-support [ ip | ipv4 ] multicast

No

show tech-support [ time-optimized ] [ forced ]

No

show tech-support aaa

No

show tech-support aclmgr [ detail ]

No

show tech-support aclmgr compressed <uri0> [ detail ]

No

show tech-support aclqos

No

show tech-support aclqos compressed <uri0>

No

show tech-support adjmgr [ brief ]

No

show tech-support all

No

show tech-support all binary <uri0>

No

show tech-support all-binary

No

show tech-support arp [ brief ]

No

show tech-support ascii-cfg

No

show tech-support bfd

No

show tech-support bgp [ brief ]

No

show tech-support biosd

No

show tech-support bloggerd

No

show tech-support bloggerd-all

No

show tech-support bootvar

No

show tech-support brief

No

show tech-support callhome

No

show tech-support cdp

No

show tech-support cert-enroll

No

show tech-support cfs [ { commands | name <cfs-dyn-app-name> [ commands1 ] } ]

No

show tech-support cli

No

show tech-support clis [ brief ]

No

show tech-support clock_manager

No

show tech-support commands

No

show tech-support copp

No

show tech-support details [ space-optimized ]

No

show tech-support dhclient

No

show tech-support dhcp

No

show tech-support dme

No

show tech-support eem

No

show tech-support eltm [ detail ]

No

show tech-support ethpm

No

show tech-support fabric forwarding

No

show tech-support fast-reload

No

show tech-support fc2 [ commands ]

No

show tech-support fips

No

show tech-support forwarding l2 multicast

No

show tech-support forwarding l2 multicast vdc-all

No

show tech-support forwarding l2 unicast [ module <module> ]

No

show tech-support forwarding l3 multicast

No

show tech-support forwarding l3 multicast detail

No

show tech-support forwarding l3 multicast detail vdc-all

No

show tech-support forwarding l3 multicast vdc-all

No

show tech-support forwarding l3 unicast [ module <module> ]

No

show tech-support forwarding l3 unicast detail [ module <module> ]

No

show tech-support forwarding l3 unicast detail vdc-all [ module <module> ]

No

show tech-support forwarding l3 unicast vdc-all [ module <module> ]

No

show tech-support forwarding mpls [ module <module> ]

No

show tech-support forwarding multicast [ module <module> ]

No

show tech-support forwarding otv multicast vdc-all

No

show tech-support gold

No

show tech-support gpixm

No

show tech-support ha [ commands ]

No

show tech-support ha standby [ commands ]

No

show tech-support icmpv6 [ brief ]

No

show tech-support im

No

show tech-support inband counters

No

show tech-support include-time

No

show tech-support install

No

show tech-support internal link-events

No

show tech-support internal link-events module <module>

No

show tech-support internal module <module>

No

show tech-support internal vsan <vsan_id>

No

show tech-support ip [ brief ]

No

show tech-support ip igmp [ brief ]

No

show tech-support ip igmp snooping [ brief ]

No

show tech-support ip pim [ brief ]

No

show tech-support ipqos [ server-only ] [ all ] [ snmp ]

No

show tech-support ipv6 [ brief ]

No

show tech-support ipv6 mld [ brief ]

No

show tech-support ipv6 multicast

No

show tech-support issu [ commands ]

No

show tech-support kstack

No

show tech-support l2

No

show tech-support l2fm

No

show tech-support l2fm clients [ module <module> ]

No

show tech-support l2fm detail [ module <module> ]

No

show tech-support l2fm l2dbg [ module <module> ]

No

show tech-support l2pt [ detail ]

No

show tech-support l2rib

No

show tech-support l3vm [ brief ]

No

show tech-support l3vpn [ brief ]

No

show tech-support lacp [ all ]

No

show tech-support license

No

show tech-support lim

No

show tech-support logging

No

show tech-support m2rib

No

show tech-support mfwd [ brief ]

No

show tech-support mmode

No

show tech-support module <module>

No

show tech-support module all

No

show tech-support monitor

No

show tech-support monitor erspan

No

show tech-support monitorc-all

No

show tech-support mpls strip

No

show tech-support mplsfwd [ brief ]

No

show tech-support mvpn [ brief ]

No

show tech-support netstack

No

show tech-support netstack detail

No

show tech-support npacl [ brief ]

No

show tech-support ns

No

show tech-support ntp

No

show tech-support nve

No

show tech-support ospf [ brief ]

No

show tech-support page [ time-optimized ] [ forced ]

No

show tech-support patch

No

show tech-support pfstat

No

show tech-support pixm

No

show tech-support pixm-all

No

show tech-support pixmc-all

No

show tech-support pktmgr [ brief ]

No

show tech-support platform

No

show tech-support plcmgr [ detail ]

No

show tech-support pltfm-config

No

show tech-support port

No

show tech-support port-channel

No

show tech-support port-client-all

No

show tech-support port-profile

No

show tech-support ptp

No

show tech-support radius

No

show tech-support rip [ brief ]

No

show tech-support routing [ ip | ipv4 ] [ unicast ] [ brief ]

No

show tech-support routing [ ip | ipv4 ] multicast [ brief ]

No

show tech-support routing ipv6 [ unicast ] [ brief ]

No

show tech-support routing ipv6 multicast [ brief ]

No

show tech-support sal

No

show tech-support satmgr

No

show tech-support security

No

show tech-support session-mgr

No

show tech-support sflow

No

show tech-support sksd

No

show tech-support smm

No

show tech-support snmp

No

show tech-support sockets [ brief ]

No

show tech-support spm [ <application> ] [ detail ]

No

show tech-support statsclient [ module <module> ]

No

show tech-support stp

No

show tech-support sup-filesys

No

show tech-support sysmgr [ commands ]

No

show tech-support track

No

show tech-support tunnel [ { commands | detail [ commands1 ] } ]

No

show tech-support udld

No

show tech-support usd-all

No

show tech-support vdc

No

show tech-support virtual-service

No

show tech-support vlan

No

show tech-support vshd

No

show tech-support vtp

No

show tech-support vxlan

No

show tech-support vxlan platform

No

show tech-support vxlan-evpn

No

show tech-support xbar

No

show tech-support xml

No

show tech-support xos [ brief ]

No

show telnet server

Yes

show terminal

No

show terminal internal info

No

show terminal output xml version

No

show time-range [ <name> ]

Yes

show track { [ <object-id> | interface | ip { route | sla } | ipv6 routev6 | list boolean and | list boolean or | list threshold weight | list threshold p

Yes

show track { [ <object-id> | interface | ip { route | sla } | ipv6 routev6 | list boolean and | list boolean or | list threshold weight | list threshold p

Yes

show track { [ <object-id> | interface | ip { route | sla } | ipv6 routev6 | list boolean and | list boolean or | list threshold weight | list threshold p

Yes

show track { [ <object-id> | interface | ip { route | sla } | ipv6 routev6 | list boolean and | list boolean or | list threshold weight | list threshold p

Yes

show track internal [ event-history ] errors

No

show track internal [ event-history ] msgs

No

show track internal info counters

No

show track internal info global

No

show track internal info object <object-id> [ up | down ]

No

show track internal mem-stats [ uuid <i0> ] [ track-only ] [ detail ]

No

show user-account [ <s0> ]

Yes

show username <s0> keypair

Yes

show userpassphrase { min-length | max-length | length }

Yes

show users

Yes

show vdc <id> resource [ <res-mgr-res-known-name> ]

Yes

show vdc current-vdc

Yes

show vdc fcoe-vlan-range

Yes

show vdc internal [ event-history ] errors

No

show vdc internal [ event-history ] msgs

No

show vdc internal { { pss [ { <e-vdc2> | interface [ <interface-name> ] } ] } | port-hash }

No

show vdc internal bitmaps

No

show vdc internal create_possible

No

show vdc internal event-history vdc_id <new_id>

No

show vdc internal mac_address_table

Yes

show vdc internal mem-stats [ detail ]

No

show vdc resource [ <res-mgr-res-known-name> ] [ detail | hidden-too | with-flags ] +

Yes

show vdc resource template [ <res-mgr-template-known-name-all> ]

Yes

show version

Yes

show version compatibility <uri0>

No

show version image <uri0>

No

show version internal build-identifier

No

show version module <module>

Yes

show version module <module> epld

No

show virtual-service [ { list } | { global } | { detail [ name <virt_serv_name> ] } | { core [ name <virt_serv_name_core> ] } ]

Yes

show virtual-service storage pool list

Yes

show virtual-service tech-support

No

show virtual-service utilization name <virt_serv_name>

Yes

show virtual-service version { { installed } | { name <virt_serv_name> installed } }

Yes

show vlan [ controller ]

Yes

show vlan access-list <name> [ <inp_seqno> ]

Yes

show vlan access-map [ <name> ]

Yes

show vlan all-ports

Yes

show vlan counters

Yes

show vlan dot1Q tag native

Yes

show vlan filter [ access-map <name> | vlan <vlan> ]

Yes

show vlan id <vlan-id>

Yes

show vlan id <vlan-id> counters

Yes

show vlan internal [ event-history ] bd-pa-pmc notif

No

show vlan internal [ event-history ] bd-port { add | delete }

No

show vlan internal [ event-history ] errors

No

show vlan internal [ event-history ] get-query notif

No

show vlan internal [ event-history ] msgs

No

show vlan internal [ event-history ] objstore

No

show vlan internal [ event-history ] pa-tmc notif

No

show vlan internal [ event-history ] traces

No

show vlan internal bd-info bd-to-vlan { <bd-id2> | all-bd }

Yes

show vlan internal bd-info bd-usage

Yes

show vlan internal bd-info vlan-to-bd { <vlan-id3> | all-vlan }

Yes

show vlan internal clear-flags

No

show vlan internal clear-flags [ drainq <q-type> ]

No

show vlan internal clear-log-buffer

No

show vlan internal event-history libprofiler

No

show vlan internal event-level <evt-lvl>

No

show vlan internal info [ vlan-db [ vlan <i0> ] | vlan-port-db [ interface <if_index> ] | port-rt-pss [ interface <if_index> ] | port-cfg-pss [

No

show vlan internal info mapping

No

show vlan internal info port-configuration interface [ <ifindex_in> ]

Yes

show vlan internal info port-translation interface [ <ifindex_in> [ <cvtPortOriginalVlan_in> ] ]

Yes

show vlan internal lib event-history

No

show vlan internal log-event-bd { <bd-id> | all }

No

show vlan internal log-event-intf { <if_index> | all }

No

show vlan internal log-event-vlan { <vlan-id> | all }

No

show vlan internal log-to-file { set | unset }

No

show vlan internal mem-stats [ detail ]

No

show vlan internal next-vlan <vlan-id> [ vlan-crsysuptime ]

Yes

show vlan internal port-info

Yes

show vlan internal port-memb-mib interface <intf-num>

Yes

show vlan internal port-memb-mib-sum <vlan-id> [ port-range <port-range-list> ]

Yes

show vlan internal print-level <prt-lvl>

No

show vlan internal trunk interface <intf-num>

Yes

show vlan internal trunk-info interface <if-index> <trunk-dis-size>

Yes

show vlan internal trunk2 interface <intf-num>

Yes

show vlan internal usage [ id <vrange> ]

Yes

show vlan internal vdc-info

Yes

show vlan internal vdc-info2

Yes

show vlan internal vlan-info <vlan-id2>

Yes

show vlan internal vpc-info [ clear-stats ]

No

show vlan name <vname>

Yes

show vlan reserved

Yes

show vlan xbrief [ controller | cli ]

Yes

show vlan xsummary

Yes

show vlan-mgr errors

No

show vlan-mgr event-history

No

show vrf [ <vrf-name> | <vrf-known-name> | all ] [ order id ] [ detail ] [ passive ]

Yes

show vrf [ <vrf-name> | <vrf-known-name> | all ] interface [ <interface> ]

Yes

show vrf topology [ order id ] [ detail ]

Yes

show vtp counters

Yes

show vtp datafile

No

show vtp domain id <domain-id>

Yes

show vtp interface [ <interface_range> ]

Yes

show vtp internal event-history errors

No

show vtp internal event-history events

No

show vtp internal event-history pruning

No

show vtp internal event-history traces

No

show vtp internal info [ global | all ]

No

show vtp internal mem-stats [ detail ]

No

show vtp mibstats

Yes

show vtp password [ domain <domain-id> ]

Yes

show vtp status

Yes

show vtp trunk interface <if_index>

Yes

show vtp vlan <vlan-id> [ domain <domain-id> ]

Yes

show vxlan [ interface [ <int-id> | <ch-id> ] ]

No

show wred-queue qos-group-map

No

show wrr unicast-bandwidth

No

show wrr-queue qos-group-map

No

show xml server internal exec-info { all | <session_id> }

Yes

show xml server internal history { commands | errors | all_history } [ session <session_id> ]

Yes

show xml server logging configuration

No

show xml server status

Yes

Preface

This preface includes the following sections:

- Audience

- Documentation Conventions

- Documentation Feedback

- Communications, Services, and Additional Information

Audience

This publication is for network administrators who install, configure, and maintain Cisco Nexus switches.

Documentation Conventions

Command descriptions use the following conventions:

Convention

Description

bold

Bold text indicates the commands and keywords that you enter literally as shown.

Italic

Italic text indicates arguments for which the user supplies the values.

[x]

Square brackets enclose an optional element (keyword or argument).

[x | y]

Square brackets enclosing keywords or arguments separated by a vertical bar indicate an optional choice.

{x | y}

Braces enclosing keywords or arguments separated by a vertical bar indicate a required choice.

[x {y | z}]

Nested set of square brackets or braces indicate optional or required choices within optional or required elements. Braces and a vertical bar within square brackets indicate a required choice within an optional element.

variable

Indicates a variable for which you supply values, in context where italics cannot be used.

string

A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.

Examples use the following conventions:

Convention

Description

screen font

Terminal sessions and information the switch displays are in screen font.

boldface screen font

Information you must enter is in boldface screen font.

italic screen font

Arguments for which you supply values are in italic screen font.

< >

Nonprinting characters, such as passwords, are in angle brackets.

[ ]

Default responses to system prompts are in square brackets.

!, #

An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line.

Documentation Feedback

To provide technical feedback on this document, or to report an error or omission, please send your comments to . We appreciate your feedback.

Communications, Services, and Additional Information

- To receive timely, relevant information from Cisco, sign up at Cisco Profile Manager.

- To get the business impact you’re looking for with the technologies that matter, visit Cisco Services.

- To submit a service request, visit Cisco Support.

- To discover and browse secure, validated enterprise-class apps, products, solutions and services, visit Cisco Marketplace.

- To obtain general networking, training, and certification titles, visit Cisco Press.

- To find warranty information for a specific product or product family, access Cisco Warranty Finder.

Cisco Bug Search Tool

Cisco Bug Search Tool (BST) is a web-based tool that acts as a gateway to the Cisco bug tracking system that maintains a comprehensive list of defects and vulnerabilities in Cisco products and software. BST provides you with detailed defect information about your products and software.