Contents

• Update History
• Introduction
• Deciding When to Upgrade EPLDs
• Switch Requirements
• EPLD Upgrades Available for ACI-Mode Releases 11.0(1d) to 11.1(2i)
• Related Documentation
• Documentation Feedback
• Obtaining Documentation and Submitting a Service Request

First Published: February 16, 2016

Last Updated: July 25, 2016

Update History

---

This document lists the current and past versions of EPLD images and describes how to update them for use with the Cisco Nexus 9000 Series switches.

The following table shows the history of changes for this document.

Date	Description
February 16, 2016	Created the release notes for Release 1.1(2i).
March 1, 2016	Removed sections with instructions that did not apply to ACI-Mode operations.
May 1, 2016	Changed the number of supported Cisco Nexus 9516 I/O modules to 10.
July 25, 2016	Changed release numbering from 1.x(xx) format to 11.x(xx) format.

Introduction

The Cisco Nexus 9000 Series ACI-mode switches contain several programmable logical devices (PLDs) that provide hardware functionalities in all modules. Cisco provides electronic programmable logic device (EPLD) image upgrades to enhance hardware functionality or to resolve known issues. PLDs include electronic programmable logic devices (EPLDs), field programmable gate arrays (FPGAs), and complex programmable logic devices (CPLDs), but they do not include ASICs. In this document, the term EPLD is used for FPGA and CPLDs.

The advantage of having EPLDs for some module functions is that when you need to upgrade those functions, you just upgrade their software images instead of replacing their hardware.

Note	EPLD image upgrades for an I/O module disrupt the traffic going through the module because the module must power down briefly during the upgrade. The system performs EPLD upgrades on one module at a time, so at any one time the upgrade disrupts only the traffic going through one module.

Cisco provides the latest EPLD images with each release. Typically, these images are the same as provided in earlier releases but occasionally some of these images are updated. These EPLD image updates are not mandatory unless otherwise specified. The EPLD image upgrades are independent from the Cisco ACI In Service Software Upgrade (ISSU) process, which upgrades the system and kickstart images with no impact on the network environment.

When Cisco makes an EPLD image upgrade available, these release notes announce their availability, and you can download them from http:/​/​www.cisco.com.

Deciding When to Upgrade EPLDs

When new EPLD images are available, the upgrades are always recommended if your network environment allows for a maintenance period in which some level of traffic disruption is acceptable. If such a disruption is not acceptable at this time, then you might consider postponing the upgrade until a better time.

Note	The EPLD upgrade operation is a disruptive operation. You should execute this operation only at a programmed maintenance time. The system/kickstart ISSU upgrade is a nondisruptive upgrade.

Note	Do not perform an EPLD upgrade during an ISSU system/kickstart upgrade.

Switch Requirements

The Cisco Nexus 9000 Series switch must be running the Cisco ACI operating system and include the following hardware:

• Supervisor modules—one or two, each with at least 200 MB of available bootflash memory (Cisco Nexus 9504, 9508, and 9516 switches)

• System controller modules—one or two (Cisco Nexus 9504, 9508, and 9516 switches)

• I/O modules (Cisco Nexus 9504, 9508, and 9516 switches)

  • One to four modules for the Cisco Nexus 9504 switch

  • One to eight modules for the Cisco Nexus 9508 switch

  • One to ten modules for the Cisco Nexus 9516 switch

• Fabric modules—three to six (Cisco Nexus 9504, 9508, and 9516 switches)

• Fan modules

  • Two for the Cisco Nexus 93120TX switch

  • Three for the Cisco Nexus 93128TX, 9396PX, and 9396TX switches

  • Four for the Cisco Nexus 9332PQ, 9372PX, 9372PX-E, and 9372TX switches

• Fan trays

  • Three for the Cisco Nexus 9504, 9508, and 9516 modular switches

• Power supplies

  • One or two of the following power supplies for the Cisco Nexus 9332PQ, 9372PX, 9372PX-E, 9372TX, 9396PX, and 9396TX switches:

    • 650-W AC power supply with port-side intake airflow (N9K-PAC-650W)

    • 650-W AC power supply with port-side exhaust airflow (N9K-PAC-650W-B)

    • 930-W DC power supply with port-side intake airflow (UCSC-PSU-930WDC)

    • 930-W DC power supply with port-side exhaust airflow (UCS-PSU-6332-DC)

  • One or two 1200-W AC or one or two 930-W DC power supplies for the Cisco Nexus 93120TX, 93128TX, and 9336PQ switches:

    • 1200-W AC power supply with port-side intake airflow (N9K-PAC-1200W) (Cisco Nexus 93120TX and 9336PQ only)

    • 1200-W AC power supply with port-side exhaust airflow (N9K-PAC-1200W-B) (Cisco Nexus 93120TX and 9336PQ only)

    • 1200-W HVAC/HVDC power supply with dual direction airflow (N9K-PUV-1200W)

    • 930-W DC power supply with port-side intake airflow (UCSC-PSU-930WDC) (Cisco Nexus 93120 only)

    • 930-W DC power supply with port-side exhaust airflow (UCS-PSU-6332-DC) (Cisco Nexus 93120 only)

  • Up to four 3000-W AC power supplies or up to four 3000-W Universal AC/DC power supplies for the Cisco Nexus 9504 switch

  • Up to eight 3000-W AC power supplies or up to eight 3000-W Universal AC/DC power supplies for the Cisco Nexus 9508 switch

  • Up to 10 3000-W AC power supplies or up to 10 3000-W Universal AC/DC power supplies for the Cisco Nexus 9516 switch

• Uplink module (Cisco Nexus 93128TX, 9396PX, and 9396TX switches only)

  • M6PQ

  • M6PQ-E

  • M12PQ

You must have administrator privileges to work with the Cisco Nexus 9000 Series switch.

EPLD Upgrades Available for ACI-Mode Releases 11.0(1d) to 11.1(2i)

Each EPLD image that you can download from http:/​/​www.cisco.com is a bundle of EPLD upgrades. To see the updated EPLD versions for the Cisco Nexus 93xxx ACI-mode switches and the Cisco Nexus 95xx ACI-mode switches, see the following tables.

Note	All updates to an image are shown in boldface.

Table 1 EPLD images for the Cisco Nexus 93xxx ACI-Mode Fixed Switches

Component	EPLD Device	Releases 11.0(1d)	Releases 11.0(2m)	Releases 11.0(3f) 11.0(3i)	Release 11.0(4q)	Release 11.1(1s)	Release 11.1(2i)
Cisco Nexus 93128TX Switch (N9K-C93128TX)	IO FPGA	0x7 (0.007)	0x8 (0.008)	0x8 (0.008)	0x8 (0.008)	0x8 (0.008)	0x9 (0.009)
	MI FPGA	0x9 (0.009)	0x9 (0.009)	0x9 (0.009)	0x9 (0.009)	0x9 (0.009)	0x9 (0.009)
Cisco Nexus 9332PQ Switch (N9K-C9332PQ)	IO FPGA	N.A.1	N.A.1	0x10 (0.016)	0x10 (0.016)	0x10 (0.016)	0x10 (0.016)
	MI FPGA	N.A.1	N.A.1	0x13 (0.019)	0x13 (0.019)	0x15 (0.021)	0x15 (0.021)
Cisco Nexus 9336PQ Switch (N9K-C9336PQ)	MI FPGA	0x9 (0.009)	0x10 (0.016)	0x10 (0.016)	0x10 (0.016)	0x10 (0.016)	0x10 (0.016)
Cisco Nexus 9372PX Switch (N9K-C9372PX-E)	IO FPGA	N.A.1	N.A.1	0x6 (0.006)	0x6 (0.006)	0x6 (0.006)	0x6 (0.006)
	MI FPGA	N.A.1	N.A.1	0x11 (0.017)	0x11 (0.017)	0x14 (0.020)	0x14 (0.020)
Cisco Nexus 9372PX-E Switch (N9K-C9372PX-E)	IO FPGA	N.A.1	N.A.1	0x6 (0.006)	0x6 (0.006)	0x6 (0.006)	0x6 (0.006)
	MI FPGA	N.A.1	N.A.1	0x11 (0.017)	0x11 (0.017)	0x14 (0.020)	0x14 (0.020)
Cisco Nexus 9372TX Switch (N9K-C9372TX)	IO FPGA	N.A.1	N.A.1	0x4 (0.004)	0x4 (0.004)	0x4 (0.004)	0x4 (0.004)
	MI FPGA	N.A.1	N.A.1	0x13 (0.019)	0x13 (0.019)	0x14 (0.020)	0x14 (0.020)
Cisco Nexus 9396PX Switch (N9K-C9396PX)	IO FPGA	0x13 (0.019)	0x13 (0.019)	0x14 (0.020)	0x14 (0.020)	0x14 (0.020)	0x14 (0.020)
	MI FPGA	0x13 (0.019)	0x14 (0.020)	0x14 (0.020)	0x14 (0.020)	0x14 (0.020)	0x14 (0.020)
Cisco Nexus 9396TX Switch (N9K-C9396TX)	IO FPGA	0x5 (0.005)	0x6 (0.006)	0x7 (0.007)	0x7 (0.007)	0x7 (0.007)	0x7 (0.007)
6-port 40-Gigabit optical uplink module (N9K-M6PQ and N9K-M6PQ-E)	MI FPGA	N.A.1	0x9 (0.009)	0x9 (0.009)	0x9 (0.009)	0x10 (0.016)	0x10 (0.016)
12-port optical uplink module (N9K-M12PQ)	MI FPGA	0x17 (0.023)	0x18 (0.024)	0x18 (0.024)	0x18 (0.024)	0x20 (0.032)	0x20 (0.032)

¹ Not available in this release.

Table 2 EPLD images for the Cisco Nexus 95xx ACI-Mode Modular Switches

Component	EPLD Device	Releases 11.0(1d)	Releases 11.0(2m)	Releases 11.0(3f) 11.0(3i)	Release 11.0(4q)	Release 11.1(1s)	Release 11.1(2i)
Supervisor A (N9K-SUP-A)	IO FPGA	0x20 (0.032)	0x22 (0.034)	0x22 (0.034)	0x22 (0.034)	0x22 (0.034)	0x22 (0.034)
Supervisor B (N9K-SUP-B)	IO FPGA	N.A.2	0x20 (0.032)	0x22 (0.034)	0x22 (0.034)	0x22 (0.034)	0x22 (0.034)
System Controller (N9K-SC-A)	IO FPGA	0x17 (0.023)	0x17 (0.023)	0x17 (0.023)	0x19 (0.025)	0x19 (0.025)	0x19 (0.025)
36-port 40-Gigabit QSFP+ I/O module (N9K-X9736PQ)	IO FPGA	0x5 (0.005	0x5 (0.005)	0x5 (0.005)	0x5 (0.005)	0x5 (0.005)	0x5 (0.005)
	MI FPGA	0x4 (0.004)	0x5 (0.005)	0x5 (0.005)	0x5 (0.005)	0x5 (0.005)	0x5 (0.005)
Fabric module for Cisco Nexus 9504 chassis (N9K-C9504-FM)	IO FPGA	N.A.2	0x18 (0.024)	0x18 (0.024)	0x18 (0.024)	0x18 (0.024)	0x18 (0.024)
Fabric module for Cisco Nexus 9508 chassis (N9K-C9508-FM)	IO FPGA	0x18 (0.024)	0x18 (0.024)	0x18 (0.024)	0x18 (0.024)	0x18 (0.024)	0x18 (0.024)
Fabric module for Cisco Nexus 9516 chassis (N9K-C9516-FM)	IO FPGA	N.A.2	N.A.2	N.A.2	N.A.2	0x12 (0.018)	0x12 (0.018)

² Not available in this release.

Related Documentation

Cisco Application Centric Infrastructure (ACI) Documentation

The ACI documentation is available at the following URL: http:/​/​www.cisco.com/​c/​en/​us/​support/​cloud-systems-management/​application-policy-infrastructure-controller-apic/​tsd-products-support-series-home.html.

Cisco Application Centric Infrastructure (ACI) Simulator Documentation

The Cisco ACI Simulator documentation is available at http:/​/​www.cisco.com/​c/​en/​us/​support/​cloud-systems-management/​application-centric-infrastructure-simulator/​tsd-products-support-series-home.html.

Cisco Nexus 9000 Series Switches Documentation

The Cisco Nexus 9000 Series Switches documentation is available at http:/​/​www.cisco.com/​c/​en/​us/​support/​switches/​nexus-9000-series-switches/​tsd-products-support-series-home.html.

Cisco Application Virtual Switch Documentation

The Cisco Application Virtual Switch (AVS) documentation is available at http:/​/​www.cisco.com/​c/​en/​us/​support/​switches/​application-virtual-switch/​tsd-products-support-series-home.html.

Cisco Application Centric Infrastructure (ACI) Integration with OpenStack Documentation

Cisco ACI integration with OpenStack documentation is available at http:/​/​www.cisco.com/​c/​en/​us/​support/​cloud-systems-management/​application-policy-infrastructure-controller-apic/​tsd-products-support-series-home.html.

Documentation Feedback

To provide technical feedback on this document, or to report an error or omission, please send your comments to apic-docfeedback@cisco.com. We appreciate your feedback.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What's New in Cisco Product Documentation, at: http:/​/​www.cisco.com/​c/​en/​us/​td/​docs/​general/​whatsnew/​whatsnew.html.

Subscribe to What's New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation as an RSS feed and delivers content directly to your desktop using a reader application. The RSS feeds are a free service.

Copyright © 2016, Cisco Systems, Inc. All rights reserved.