The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes the system management commands available that begin with V.
To verify the current configuration session, use the verify command.
|
|
This example shows how to verify a session:
|
|
---|---|
To configure a virtual routing and forwarding (VRF) instance for Encapsulated Remote Switched Port Analyzer (ERSPAN) traffic forwarding in the source, use the vrf command. To revert to the defaults, use the no form of this command.
vrf { vrf_name | default | management }
no vrf { vrf_name | default | management }
Name of the VRF. The VRF name can be any case-sensitive, alphanumeric string up to 32 characters. |
|
ERSPAN session configuration mode
|
|
This example shows how to configure a VRF instance for the ESRSPAN source: