Cisco Nexus 6000 Series NX-OS Fundamentals Command Reference
F Commands
Downloads: This chapterpdf (PDF - 79.0KB) The complete bookPDF (PDF - 1.19MB) | Feedback

F Commands

Table Of Contents

F Commands

find

format


F Commands


This chapter describes the basic Cisco NX-OS system commands that begin with F.

find

To find filenames beginning with a character string, use the find command.

find filename-prefix

Syntax Description

filename-prefix

First part or all of a filename. The filename prefix is case sensitive.


Command Default

None

Command Modes

EXEC mode

Command History

Release
Modification

6.0(2)N1(1)

This command was introduced.


Usage Guidelines

The find command searches all subdirectories under the current working directory. You can use the cd and pwd commands to navigate to the starting directory.

Examples

This example shows how to display filenames beginning with "n5000":

switch# find n6000 
 
   

Related Commands

Command
Description

cd

Changes the current working directory.

pwd

Displays the name of the current working directory.


format

To format the bootflash device, which erases its contents and restores it to its factory-shipped state, use the format command.

format bootflash:

Syntax Description

bootflash:

Specifies the name of the bootflash file system.


Command Default

None

Command Modes

EXEC mode

Command History

Release
Modification

6.0(2)N1(1)

This command was introduced.


Examples

This example shows how to format the bootflash device:

switch# format bootflash: 
 
   

Related Commands

Command
Description

cd

Changes the current working directory.

dir

Displays the directory contents.

pwd

Displays the name of the current working directory.