LEDs
This appendix describes the conditions indicated by the chassis and module LEDs on the Cisco Nexus 6000 Series switches.
Chassis and Module LEDs for the Cisco Nexus 6000 Series Switches
This section includes the following topics:
Chassis and Module LED Descriptions
This table describes the chassis LEDs for the Cisco Nexus 6000 Series switches.
Power supply failures, over voltage, over current, over temperature
Table D-1 table describes the status of the two power supply LEDs
Conditions Indicated by the Power Supply LEDs
You can determine the power supply conditions by combining the LED states of the OK and FAIL LEDs (see Table D-1).
Port LEDs
This section includes the following topics:
Ethernet Port LEDs
Table D-2 lists the LED descriptions for the RJ-45 Ethernet port LEDs.
Ethernet and Fibre Channel LEDs
There are activity LED’s per-port on the Cisco Nexus 6004 faceplate. The LEMs and GEMs have the same port level indicators as the fixed ports. Since 40G ports are comprised of 4x 10G ports, they will have 4x LEDs, one-LED-per-10G-port. Each LED represents the status of the 10G link within the 40G bundle, and follows the behavior in the table below. Table D-3 describes the behavior of the port LEDs.