monitor erspan origin ip-address
To configure the Encapsulated Remote Switched Port Analyzer (ERSPAN) origin IP address, use the monitor espan origin ip-address command. To remove the ERSPAN origin IP address configuration, use the no form of this command.
monitor erspan origin ip-address ip-address [global]
no monitor erspan origin ip-address ip-address [global]
Syntax Description
ip-address |
IP address. |
global |
(Optional) Specifies the default virtual device context (VDC) configuration across all VDCs. |
Command Default
None
Command Modes
Global configuration mode
Command History
Release |
Modification |
---|---|
5.2(1)N1(1) |
This command was introduced. |
Usage Guidelines
When you change the origin IP address in the default VDC, it impacts all the sessions.
This command does not require a license.
Examples
This example shows how to configure the ERSPAN origin IP address:
switch# configure terminal
switch(config)# monitor erspan origin ip-address 10.1.1.1 global
switch(config)#
This example shows how to remove the ERSPAN IP address:
switch# configure terminal
switch(config)# no monitor erspan origin ip-address 10.1.1.1 global
switch(config)#