You can view any zone information by using the show command. If you request information for a specific object (for example, a specific zone, zone set, VSAN, or alias, or keywords such as brief or active), only information for the specified object is displayed.
The following example shows how to display zone information for all VSANs:
switch# show zone
The following example shows how to display zone information for a specific VSAN:
switch# show zone vsan 1
The following example shows how to display the configured zone sets for a range of VSANs:
switch# show zoneset vsan 2-3
The following example shows how to display the members of a specific zone:
switch# show zone name Zone1
The following example shows how to display fcalias configuration:
switch# show fcalias vsan 1
The following example shows how to display all zones to which a member belongs:
switch# show zone member pwwn 21:00:00:20:37:9c:48:e5
The following example shows how to display the number of control frames exchanged with other switches:
switch# show zone statistics
The following example shows how to display the active zone set:
switch# show zoneset active
The following example shows how to display the active zones:
switch# show zone active
The following example shows how to display the zone status:
switch# show zone status