The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes the Cisco NX-OS object tracking show commands.
To show information about object tracking, use the show track command.
show track [object-id] [interface | ip route] [brief]
Display information for all tracked objects.
Any command mode
|
|
5.0(3)N1(1) |
This command was introduced. |
This example shows how to display information about tracked interfaces:
switch# show track interface
This example shows how to display information about tracked IP routes:
switch# show track ip route
This example shows how to display brief information about tracked objects:
switch# show track brief
|
|
---|---|
track interface |
Tracks the state of an interface. |
track ip route |
Tracks the state of an IP route. |