- Preface
- New and Changed Information
- Layer 3 Interfaces Commands
- H Commands
- I Commands
- N Commands
- IGMP Commands
- C Commands
- I Commands
- Show Commands
- IGMP Snooping Commands
- C Commands
- H Commands
- I Commands
- Show Commands
- MSDP Commands
- C Commands
- F Commands
- I Commands
- R Commands
- Show Commands
- PIM Commands
- C Commands
- F Commands
- I Commands
- R Commands
- Show Commands
Cisco Nexus 5000 Series NX-OS Multicast Routing Command Reference
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- July 12, 2012
Chapter: H Commands
H Commands
This chapter describes the Cisco NX-OS routing commands that begin with H.
hardware profile multicast max-limit
To set the maximum number of entries in the multicast routing table, use the hardware profile multicast max-limit command.
hardware profile multicast max-limit max-entries
Syntax Description
Maximum number of entries in the multicast routing table. The range is from 0 to 8000. |
Command Default
Command Modes
Command History
|
|
|
Usage Guidelines
Examples
This example shows how to set the maximum number of entries in the multicast routing table to 3000:
Related Commands
|
|
|
|---|---|
Displays information about the multicast routing table limits. |
Feedback